This is certainly a poor design, as you can read many seasoned admins who have updated their iDRAC only to have it killed. One possible cause is not by doing all the incremental updates, doing updates from an old iDRAC to one many revisions newer is a sure way to kill things, but even then there is no guarantee based on the amount of failures.
List of threads of people's dead iDRAC's:........
This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525.
Then nvidia-modeset goes to 100%
There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines.
https://forums.de........
First we need a few extra packages:
apt update
apt install -y adduser libfontconfig1 musl sudo
wget https://dl.grafana.com/enterprise/release/grafana-enterprise_10.3.1_amd64.deb
Install / Enable Grafana
dpkg -i grafana-enterprise_10.3.1_amd64.deb
dpkg -i grafana-enterprise_10.3.1_amd64.deb
(Reading database ... 44309 files and directories currently installed.)
Preparin........
Proxmox's documentation shows the following here.
Which mainly just says change /etc/hosts and /etc/hostname with your new hostname.
Here's what happens if you only do that:
If you just do the above, you will find you have an inaccessible original hostname that contains those VMs and you cannot........
find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV"
Africa/Addis_Ababa
Africa/Abidjan
Africa/Blantyre
Africa/Lusaka
Africa/Casablanca
Africa/Libreville
Africa/Asmara
Africa/Bujumbura
Africa/Dakar
Africa/Lagos
Africa/Malabo
Africa/Harare
Africa/Kigali........
Step 1.) Upgrade to Debian 11 first
The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful.
Step 2.) Update sources.list
Update your /etc/apt/sources.list like this:
deb http://........
If you have swarm services and dockerd is creating a high load even with the containers just being idle, the easiest solution is to upgrade to a newer docker version.
For example an identical config of 3 nodes, with Redis 5 with 30 replicas produces a load of about 1.45 in Debian 10 with Docker18.09.1
If I create the same setup on Debian 11, with Docker 20.10.5+dfsg1 then the CPU usage is low.
One other difference I wondered is the kernel. In my test setup........
The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself.
I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all.
docker run -it --runtime=nvidia --gpus all ubuntu bash
These works for most images li........
Welcome to our in-depth guide on configuring NVIDIA GPUs with Docker on Ubuntu. This post is tailored for developers, data scientists, and IT professionals who are looking to leverage the power of NVIDIA's GPU acceleration within Docker containers.
Whether you're working on machine lea........
By default in most newer Windows installs, you will not be able to download files from "Internet" sites and you'll get this error "Your security settings do not allow for this file to be downloaded."
Solution to Enable Downloads in IE Internet Explorer
1.) Go to Settings (button) -> Internet options -> Security (tab)
2.) Click "Internet" and then the "Custom Level" button.
3.) Find the following section and set D........
How to check what kernel version you have/currently running?
uname -rm
5.4.0-91-generic x86_64
The above shows us that we are running 5.4.0-91-generic on the x86_64 architecture.
The safest way is to stick with the same flavor eg if you're on generic, and say on kernel 5.4.0 then it makes sense to follow what is below. However, if you are migrating or dual booting between newer hardware (eg. you got a........
request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted
This is usually caused by a mismatch in architecture and happens frequently in development environments.
Here is a example of what caused this issue:
Your binaries are based on one architecture
Your kernel was compiled with another architecture.
Why does this happe........
By default if you create a private key for SSH, it will create something like .ssh/id_rsa
Linux will always search for and offer this key when connecting to servers.
If you put extra keys in your .ssh directory like id_rsa_realtechtalk.com, they will be ignored by default and NOT used or offered (you can verify this with ssh -v) and see it is not being offered.
Here is how you add the extra SSH keys so they are all offered:
#this gives........
This sort of thing normally happens your python3 or pip3 has been updated, because you have to in order to use pip, but the newer pip now breaks compatibility with your old python (3.5 in this case).
There are a few solutions, the easiest is perhaps to upgrade to a newer OS with a newer distro provided Python 3 or to manually install a newer version of Python/OR use a PPA like deadsnakes that provides newer versions.
........
haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx.
haproxy is used by many large sites per Wikipedia:
HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........
Virtualbox is a very powerful tool, but for some use cases it is less than optimal.
Say you are in a work, lab or other environment where you are not alone on the physical network and there could be overlap of IPs, but you need all of your VMs to be contactable from your host, VMs need to communicate with each other, and VMs need internet.
NAT Network will give you VM to VM communication and internet, however, it is buggy and unstable. It also doesn't allow host to VM co........
Remember that control connections are established on port 1723 and then actual data is transferred over GRE protocol 47.
If you have a NAT setup this will work without special forwarding or accepting of GRE packets (normally if you are not blocking outgoing connections and accepting established and related connections).
The below two commands will get things going so PPTP and GRE work
We first load the ip_nat_pptp module which allows PPTP to work with........
Have you checked your router/firewall logs and disconcertingly see connections to an unknown IP207.246.119.209:3478 from your Grandstream VOIPphones?
You're not alone and the Grandstream forums have discussed this issue.
However, even their own staff d........
I've seen this bizarrely happen on a newly partitioned and custom installed Linux install, particularly if you did not properly unmount before rebooting.
You can find reports of it happening on various
How to fix the error: invalid arch-independent ELF magic.
You need to boot into Live/Rescue mode, chroot into your OS properly and then do a grub-install on each drive that nee........
This article about migrating to a CentOS 7 /8 RAID mdadm array has a lot of info but I wanted to focus specifically on what newer versions of CentOS 7 require to boot mdadm and what changes are necessary on CentOS 7.8+
CentOS 7 / 8 mdadm RAID booting requirements
This assumes you are chrooting into an existing install or using it to get a new deployment ready. However, these steps can........
The easiest way for the 8821AU Realtek Wifi chipset / TP-Link T2U Plus:
Bus 002 Device 003: ID 2357:0120 TP-Link Archer T2U PLUS [RTL8821AU]
First install your kernel headers/source/other required tools:
sudo apt install linux-headers-`uname -r` make gcc bc
Clone this github repo with the driver:
git clone https://github.com/morrownr/8821au-20210708
Run the compile/ins........
Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows.
There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........
If you are using mint, delete the preference that stops snap from installing (as it is required for lxc)
sudo rm /etc/apt/preferences.d/nosnap.pref
1. Install lxd:
sudo apt install lxd
Issues install lxd or errors? Click here
Debian at this time does not have lxd so you'll need to use snap:
sudo apt in........
This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory.
Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage.
One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........
(firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory)
ExceptionHandler::GenerateDump cloned child 9743
ExceptionHandler::WaitForContinueSignal waiting for continue signal...
ExceptionHandler::SendContinueSignalToChild sent continue signal to child
[Parent 9562, Gecko_IOThread] WARNING: pipe error (40): Connection reset by peer: file /build/firefox-EymEXX/fire........
Install procps and it will install the other packages you need:
apt install procps
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
libgpm2 libncurses6 libprocps7 lsb-base psmisc
Suggested packages:
gpm
The following NEW packages will be ins........
The Best Docker Tutorial for Beginners
We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........
Why choose OpenVPN instead of a firewall appliance?
OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time.
When comparing OpenVPN with traditional firewal........
The key is that you need to know the passphrase to do it, if you don't know the password for the key then you can't remove the key since it cannot be decrypted.
ssh-keygen is the easiest method and openssl can be used to manually remove the key and output it to a new file, which you can then copy back over top of the encrypted file.
After that your public key authentication will work without any password prompt because it is no longer encrypted. Make sure you understand........
A lot of newer installs will automatically prohibit the root user from logging in directly, for security reasons or they will only allow key based access.
If you know what you are doing/don't care about security or have an incredibly secure password for testing, then you can enable it.
Edit this file: /etc/ssh/sshd_config
Find the following line: PermitRootLogin
Set it like this:
PermitRootLogin yes
Now rest........
1. Let's work from an environment where we can install Ansible on.
If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way:
sudo apt install gpg
sudo add-apt-repository ppa:ansible/ansible
sudo apt update........
This normally happens when you interrupt the install of Ceph:
pveceph install
update available package list
start installation
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
gdisk is already the newest version (1.0.6-1.1).
ceph-common is already the newest version (15.2.15-pve1).
ceph-fuse is already the newest version (15.2.15-pve1).
Some package........
How To Enable HA in Proxmox
Test Your HA
Shutdown the node that has the HA VM.
........
In newer of versions of Virtualbox, especially above 6.0 (eg. 6.1 like the example below), a lot of times the "Enable Nested VT-x/AMD-V".
If you are having this issue, you will see the option is grayed out. It doesn't mean that your computer does not support virtualization, although it is possible it is disabled in the BIOS. You can verify........
The Linux Mint team has disabled it by setting an apt preference, you can edit or just remove the file:
sudo apt install snapd
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package snapd is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source........
Kubernetes Easy Beginners Tutorial/Architecture Guide
Kubernetes is known as container orchestration and we should start at explaining the container part of it.
A Container is what runs the actual application and based on an Image, and are more comparable to something like an LXC Container, Virtuozzo/OpenVZ using the Linux Kernel Namespaces feature. Containers run these images as independent, isolated operating environments under the O........
A lot of older devices either support telnet or very old SSH keyx algorithms which are insecure and disabled by all newer/modern SSH clients for security reasons. However, sometimes you may be on a LAN via VPNor some other secured network or for whatever reason, absolutely, need to connect to this device and sometimes old/embedded devices may not be possible to update to a newer SSH server.
If you run into this you may be using a modern/newer SSH client and get thi........
If you are using the stock 5.4 kernel this is normal but I can confirm it is fixed in newer 5.8 kernels.
To fix it just install the 5.8 kernel and reboot:
sudo apt install linux-headers-5.8.0-64-generic linux-modules-extra-5.8.0-64-generic linux-image-5.8.0-64-generic........
Just a quick note and warning is that if you are testing to see if EFIPXE booting works on a VM, MAKE SURE it actually works. For example Iinitially tested using my Distro's QEMU 2.5+dfsg-5ubuntu10.46 and ovmf BIOS firmware (OVMF supports EFI). However, I found on old versions of QEMU (like 2.5), EFIbooting with GRUB NEVER works so it may appear that you have made a mistake when everything is fine when you boot a physi........
Traditionally kernels were numbered starting from 0 but by default the "new style" of grub boot loading considers each subkernel item to be different so if you have 3 entries for 4.40-148 rather than counting for 1.
To get the expected behavior let's show this example and how we can boot it
We do a grep on menuentry in /boot/grub/grub.cfg to see all of the bootable kernels rather than scrolling through loads of extra entries we don't care about (thou........
kdenlive is VERY finicky especially if using an older or newer version it can cause crashes, menus not to work, features not to work, things not to work properly.
A good example is that Icould NOT get automask to work, there would be no box to control it until I did this full reset.
One caution is that your backup project files will be erased when doing this:
How to Reset kdenlive entirely
rm ~/.config/kdenlive-layoutsrc
rm........
I have a Canon MF642c and the scanner wouldn't work. I tried to use saned but it didn't work with the BJNPlike it did for some other Canon models.
Introducing sane-airscan with packages for the most common distributions: https://software.opensuse.org/download.html?project=home%3Apzz&package=sane-airscan
http........
The best way to avoid this problem is to understand how your BIOS is setup to boot.
Often newer machines will default to U(EFI) which is different than the traditional MBR/Legacy mode.
The problem is that this may not be apparent, often a BIOS Boot Menu will show a Legacy Boot Option and EFIOption without defining it.
A good example of this is if your USB is called "Kingston" you may see in your Boot Menu "Kingston" and also "Ubuntu"........
This happens to a lot of Nvidia users especially users of newer cards like the RTX series. If for example you are trying to boot and install Linux and you get a black and white grub2 screen instead of a nice graphical welcome installer, you probably suffer from this bug. It is normally followed by the user booting and finding they just have a blank/black screen.
Here is the quick flow of steps to fix it:
If you get a black grub scree........
If you've come here, don't be embarraassed, working in IT, this is the MOST common computer problem that almost everyone will encounter. The reason why I'm doing this post is because I've seen an increase from colleagues and admins having this problem and many times it's not even your fault. A common scenario is that someone acquires a new or used computer which they weren't given the password for. Fortunately Ihave a detailed list of all the options whether free or pa........
You should only get this if you are using a Pentium II or something really old. The problem here is that newer kernels than 2.6 don't have true i386 support even if you tell it to compile as i386. It will still include features like cmov that break older computers from being able to work.
Generally for very old computers like above, you need to use a 2.6.x kernel and of course make sure it is i386 and all the binaries are as well.
........
yum -y install gcc make gperf genisoimage flex bison ncurses ncurses-devel pcre-devel augeas-devel augeas readline-devel
checking for cpio... cpio
checking for gperf... no
configure: error: gperf must be installed
configure: error: Package requirements (augeas >= 1.2.0) were not met:
Requested 'augeas >= 1.2.0' but version of augeas is 1.0.0
yum remove augeas augeas-libs augeas-devel
wget http://downl........
chroot /root/kvmguests/4591915/mount
FATAL: kernel too old
This happens for example if you are in Centos 6 and trying to chroot into a system based on a newer kernel like 4.x+
You'll have to use a newer OS/kernel system to chroot into the environment or a VM running a newer kernel.........
apt install software-properties-common
add-apt-repository ppa:deadsnakes/ppa
apt update
apt install python3-pip
apt install python3.7 curl gnupg python3.7-dev git
ln -s /usr/bin/python3.7 /usr/bin/python3
pip3 install numpy keras_preprocessing
curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add -
echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........
Most newer distros inexplicably cause your NIC to have what Icall "random" non-standard name conventions because of systemd.
This is a big problem for many people and especially those running servers. Imagine that you have a static IPconfigured for ens33 but then the hard disk is moved to a newer system, the NIC could be anything from ens33 to enp0s1, meaning that manual intervention is required to go and update the NIC config file (eg. /etc/network/interfa........
Just run this apt install command
sudo apt install pepperflashplugin-nonfree browser-plugin-freshplayer-pepperflash
After this restart your browser and check Adobe's site to verify if your Pepper flash is working and showing at least version 32.
https://helpx.adobe.com/flash-player.html
As you'll see below it will download the latest version which is currently 32 and this was not possible with the old/crappy deprecated adobe-flash plu........
This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu!
Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........
The scenario here is that you have some sort of remote headless Linux server but would like to run some programs on them and get graphical access to them. The problem is that the remote server may be an image or VMwithout any virtual GPU and even if so, it is likely without KDE or Gnome, so there's no real way to do this, unless you follow our guide.
Install xvfb
apt install xvfb
Reading package lists... D........
MySQL on Debian versions is configured differently than the native local MySQL plugin so you will be disappointed when your password on the mysql client fails by default.
Here is how you reset the MySQL root password the proper and "working way"
#first we gracefully stop mysql
sudo systemctl stop mysql;
#then we forcefully kill any mysqld process just in case
sudo killall -9 mysqld mysqld_safe;........
This is only really necessary in the case you don't want DHCP. If you are dealing with an encrypted LUKS server on the internet, you will often want to have a static IP so you know which IP to connect to (or if you have a semi-static IP assigned by DHCP).
SET IP Address by /etc/initramfs-tools/initramfs.conf
IP Address=192.168.1.27
Gateway=192.168.1.1
Subnet Mask: 255.255.255.0
Hostname=myhome.com
IP=192.1........
This is not about using ssh as a proxy, but rather, using a proxy when you are SSHing to another host and using ProxyCommand (where we normally use nc as our proxy tool).
In newer versions of nc the syntax has changed to the following:
ssh -o ProxyCommand="nc -x 127.0.0.1:1234" %h %p user@host
The format must be like above in newer nc versions.
Just be sure to change the 1234 to the port of your SOC........
The reason we use the command below is because we need the md5sum value hash of the password. This means that we cannot use the md5sum
Change "yournewpass" to the pass you want to set
echo -n "yournewpass" | md5sum
Then you get the md5sum hash of whatever you entered eg. in this case "yournewpass"
5a9351ed00c7d484486c571e7a78c913 ........
I find that the default settings for the radeon driver that is applied to most AMD cards is horrible. For example by default TearFree is not enabled and it causes videos to have some kind of square artifacts.
Here are the settings I have found most suitable for AMD cards:
You need to create file in the following path and restart Xorg or your computer to apply it:
*Beware that making a mistake here will possibly make your computer........
mysql reset root password.
Oops I can't remember my MySQL root password!
[root@centos7test etc]# mysql -u root -p
Enter password:
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)
First we need to stop mariadb:
systemctl stop mariadb
Now we need to restart it with skip-grant-tables whic........
This problem has been around forever, Linux seems to think it is fine to use the r8169 driver for an r8168 NIC but this often causes problems including the link not working at all.
In my case ethttool shows the link up and detected but it simply does not work especially on a laptop that has been resumed from suspension. Sometimes it takes several minutes for it to work or to unplug and replug the ethernet.
Here is the solution:
Install th........
Now older versions of qemu-kvm didn't throw this error say if you just had "-video cirrus" when starting qemu-kvm. But newer versions do care.
And this probably only applies to you if you are running from bash/terminal with remote kvm images.
What you need to do is remove the "-video" part and just add -vnc :5
eg. this would fix the error:
qemu-system-x86_64 -enable-kvm -boot order=cd,once=dc -m 1024 -drive........
I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules.
One other weird thing is that sometimes........
If you've just installed VBox and it is not starting or working, the most common problem is usually that you don't have your kernel source installed, which means there is no kernel driver for vbox so it can't work.
You may get an error that says "Kernel driver not installed" in your Virtualbox.
So the first thing you should do is install your kernel source by running this:
sudo apt-get install linux-headers-`uname -r`........
SSH helps keep us secure in many ways, one of those is the host-key fingerprint which is unique. If you have been connecting to an SSH server that you've made no changes to and suddenly ssh warns that the key doesn't match then you have a problem.
But how about connecting to an existing server for the first time on a new machine or client?
A lot of new clients calculate it using an SHA256 hash but it is not as easy on your host machine to produce the sam........
Opening Firefox from the CLI reveals the following as the cause of the error:
Query failed: Error: Error(s) encountered during statement execution: no such table: moz_favicons
The symptoms of this issue are that in the address bar you cannot hit enter to browse to a site/url/address and your history cannot be accessed, nor does your history show up in the address bar when typing previously used addresses.
This usually happens because you've........
Install Errors on Version 12:
This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5
on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error.
*Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install.
What really causes this even though you successfully install........
The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs.
qemu-kvm command:
/usr/libexec/qemu-kvm -version
QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard
........
Pass QEMU this flag:
-soundhw ac97
Or you could use (for a Ensoniq soundcard):
-soundhw es1370
However on some machines I get this error:
pulseaudio: pa_simple_new for capture failed
pulseaudio: Reason: Connection terminated
pulseaudio: pa_simple_new for capture failed
pulseaudio: Reason: Connection terminated
audio: Failed to create voice `ac9........
For some reason, perhaps you don't want to run a daemon or let Letsencrypt have access to your production server.
There is a way to use it like a normal CSR/CA setup in manual mode.
./letsencrypt-auto certonly --manual -d realtechtalk.com - www.realtechtalk.com
Â
Eventually you will get prompted to create a certain path and file with certain data:
Create a file containing just this data:
Casdfasfadsfsad........
ln -s --force newfile.jpg existingsymlink.jpg
All you do is use the --force flag to force/update the existing one.
The above modifies a symlink called "existingsymlink.jpg" and points it to "newfile.jpg" as the source.........
Jan 30 17:16:10 localhost sshd[25385]: error: Failed to allocate internet-domain X11 display socket.
The solution for me on the server side was the following in sshd_config:
AddressFamily inet
*Remember to restart sshd and also reconnect from the client side.
Ihad all the normal X11 settings on the server but it just stopped........
On a test machine Iwas never able to access to a newly created 4th partiton. As we can see there are dev devices for everything but the 4th partition.
The normal "partprobe" or "kpartx" or kernel being told to rescan the block device didn't help (only a reboot did).
fdisk -l /dev/sda
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units........
#Linux Mint 18.2 how to install gajim .16.9 so you can use OMEMO encryption:
sudo apt-get install python-axolotl python-nbxmpp
wget https://gajim.org/downloads/0.16/gajim-0.16.9.tar.gz
tar -zxvf gajim-0.16.9.tar.gz
cd gajim-0.16.9
./autogen.sh ;make;sudo make install
#if you get this error you need to get a newer python-nbxmpp from here:
gajim
Gajim needs python-nbxmpp >= 0.6.1 to run. Quiting...........
wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe
--2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe
Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85
Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1525561 (1.5........
sudo apt-get install hwloc-nox
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
hwloc-nox
0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded.
Need to get 151 kB of archives.
After this operation, 453 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubunt........
The solution is just to install libmicrohttpd-dev
./xmr-stak
./xmr-stak: error while loading shared libraries: libmicrohttpd.so.10: cannot open shared object file: No such file or directory
libmicrohttpd
libmicrohttpd10 - library embedding HTTP server functionality
libmicrohttpd-dbg - library embedding HTTP server functionality (debug)
libmicrohttpd-dev - library embedding HTTP server functionality (development)
$ sudo apt-get i........
sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3
sudo apt-get install libcurl4-gnutls-dev
git clone https://github.com/wolf9466/cpuminer-multi
sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev
git clone https://github.com/fireice-uk/xmr-stak-cpu.git
make install
cd bin
chmod +x xmr-stak-cpu
./xmr-stak -O xmr........
Ialready have the caja-image-converter option installed but it shows nothing.
Weirdly enough if you install nemo and nautilus converter it does show and work inside caja:
The solution is to install *-image-converter
sudo apt-get install *-image-converter
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'n........
You can search for this bug and it seems like it may be related to ecryptfs and is many years old.
The symptoms are that you return to the computer and the screensaver was active or the screen was asleep/black and it doesn't seem to come back. But you check by SSH the computer is running fine and are frustrated you'll lose your running programs and have to reboot.
There is a simple solution:
Ctrl + Alt + F1
Ctrl +Alt + F8
Ba........
#mount the VCSA DVD
mount /dev/sr0 /mnt/cd
#alternatively you could mount the iso directly
mount -o loop vcsa.iso /your/mount/path
#for this purpose we are using the CLI installer on Linux
cd /mnt/cd/vcsa-cli-installer/lin64
#no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file
./vcsa-deploy
Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
Starting with newer versions of OpenVPN Ibelieve 2.2+ you need to have "script-security 3" set or you can't execute a third party script.
Prior to that you could also use the auth-user-pass-verify like this:
auth-user-pass-verify ./validate.pl "$username $password $ip" via-env
Options error: the --auth-user-pass-verify directive should have at most 2 parameters. To pass a list of arguments as one of the paramete........
This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help.
Here is the short end of the stick that fixed it:
sudo apt-get install mdm mate-desktop-environment
Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........
curl: (35) Unknown SSL protocol error in connection
The main solution is to update curl and nss. If you are having an issue with curl through Apache/PHPyou will need to restart PHPafter.
It's important to remember that this error could mean a lot of things but most often it simply means that curl and openssl may be outdated and only allow newer secure ways of connecting to SSL.
In general here is how you would fix it in most c........
Some of the cheaper or newer SSL suppliers will require this to work properly (otherwise you may be prompted that the cert is invalid when it's not the case but it will certainly scare off your users!).
In the Apache vhost conf for the domain here is what you add:
SSLCACertificateFile /path/to/your/cafile.pem
Here is a full example of an SSL Vhost config in Apache using a CA Certificate file
........
ssh rtt@192.168.1.199
Unable to negotiate with 192.168.1.99 port 22: no matching host key type found. Their offer: ssh-dss
It looks like the DSS option is not considered secure so when connecting from newer Linux systems to an older one you will get the above error.
It can be fixed (but you should consider upgrading your SSH daemon):
ssh -oHostKeyAlgorithms=+ssh-dss rtt@192.168.1.199........
ALTER TABLE existingtable ADD newfieldname VARCHAR(255);........
Centos 6 requires GLIBC 2.12 however a lot of new programs you would want to compile may need a newer glibc. You can't remove the old glibc since the whole OS is based on it but you can install the updated glibc alongside it and do an export pointing to your updated GLIBC.
mkdir ~/glibc_install; cd ~/glibc_install
wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz........
ALTER TABLE thetable ADD newfield VARCHAR(255)
It's very simple just specify "the table" and then the newfield type........
The commands below will help you reset any mysql user password.
use mysql;
update user set password=PASSWORD('thenewpass') where User='theusername';
flush privileges;
The first line says to use the "mysql" database which contains all the user info.
the second update line sets the new password "thenewpass" for the u........
First find the line number:
awk '/what you are searching for/{ print NR; exit }' input-file
86
Now use sed to replace it:
sed -i 86s/.*/"your replacement text"/ $file
Here is a full sample script to automate it:
file=some/f........
pcimodules no longer works it produces nothing probably because the format of /sys/bus/pci is different.
lspci -k doesn't work on older lspci versions.
pciutils can be compiled but it won't work if you have an old system and compile on a newer glibc.
iteriate through /sys/bus/pci/devices/*/modalias
cat /sys/bus/pci/devices/*/modalias
pci:v00008086d00001237sv00000000sd00000000bc06sc00i00
pci:v00008086d00007000sv0000000........
Solution:
Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt
sudo aptitude install wine
The following NEW packages will be installed:
ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6
wine1.6-amd64{a} wine1.6-i386:i386{a}
The following packages will be REMOVED:........
Done on Centos 7.3 very important as clearly based on older guides it was a lot easier and more simpler! Hint do not use grub2-install!
If you have trouble booting after this check this CentOS mdadm RAID booting/fixing guide.
One huge caveat if you are an oldschool user or sysadmin who has avoided UEFIbooting
The nor........
This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether.
Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........
I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us
yum install automake curl openssl-devel libcurl-devel gcc gcc-c++
yum -y install kernel-devel-`uname -r`
yum -y install unzip
#the........
Why won't my Linux Mint boot after I manually installed a new kernel?
eg.
apt-get install linux-image-newerone
Do this
dpkg -l|grep linux-image|grep extra
ii linux-image-extra-3.16.0-38-generic 3.16.0-38.52~14.04.1&nb........
Does this mean? [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
Basically it means you created your SSL Certificate as a CA the wrong way, usually with this command:
openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key
How can you fix it and do it properly?
Step 1.) Make a new Private KeyCreate server pass key:........
The solution is simple this happens if you don't meet the requirements. In my case PHP 5.4 was required but I had PHP 5.3 installed. Once I installed a newer version the install of PHPBB was successful.........
This is especially helpful if you run your own servers. If you are presented with an error message or warning that the signature has changed or does not match the IP/domain you are connecting to you always want to verify manually.
So your e-mail/web client will show you an SHA-1 fingerprint like this:
"Could not verify this certificate because the issuer is unkown" or other reasons such as a mismatch in IP/domain.
It will also show you........
1.) Replicate the number of partitions in your new drives.
gdisk /dev/sda
gdisk /dev/sdb
I created 3 partitions of the same same size.
partition #1: +1G (/boot)
partition #2: +60G (swap)
partition #3: rest of it (/)
#note if you are using GPT/gdisk you need to create separate a partition at least 1MB in size (in my case I would a 4th partition and mark it type ef02).........
This was a surprising bug but I unplugged all drives for an array md127. At first it was just 1 drive and mdadm seemed to notice this. I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it. This created problems trying to unmount it or even to stop this array with mdadm freezing.
As for how to fix it I can only think of making sure you are not in a mounted path of........
[Thu Jan 26 14:13:31 2017] [notice] caught SIGTERM, shutting down
[Thu Jan 26 14:14:00 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jan 26 14:14:00 2017] [error] Server certificate is expired: 'Server-Cert'
[Thu Jan 26 14:14:00 2017] [notice] SSL FIPS mode disabled
[Thu Jan 26 14:14:07 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jan 26 14:14:07 2017] [error] Server certificate is expired: 'Server-Ce........
The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files.
UPDATE user SET password=password("newpass") WHERE user='root';
flush privileges;
ERROR 2013 (HY000): Lost connection to MySQL server durin........
I created a new partition table on a newly plugged in device and it caused fdisk to hang (even force kill does not work). It also may be a bad drive or some other issue because fdisk -l hangs after the first 2 HDDs (totaly of 8 HDDs on this system):
[1232879.903596] INFO: task fdisk:27176 blocked for more than 120 seconds.
[1232879.903607] Tainted: P&nbs........
md127 issue, it should be /dev/md3 per mdadm.conf
Any time something is mounted as md127 it almost always means there is no entry for this mdadm array in the mdadm.conf in initramfs (which is separate from your actual /etc/mdadm.conf).
cat /etc/mdadm.conf
ARRAY /dev/md3 metadata=1.2 UUID=b6722845:381cc94e:7a2c5b5f:8e3b7c4f
The reason for this is something strange, most Linux OS's bizarrely always keep their own copy of /etc/mdadm.con........
I still cannot understand how this would not be enabled by default and I struggled to find the reason why with manually installing samba etc.. wondering why the option for sharing was not in the menu.
On Linux Mint "MATE" the package is called "caja-share" and on Cinnamon it is called "nemo-share" so edit the below command as necessary:
*Also note that the "samba" package is necessary as it is not inst........
It all comes down to a bug essentially where you are running an older kernel that doesn't support the newer Debian templates. The solution is to update your OpenVZ kernel.
Here are some symptoms of the problem/lack of kernel support:
Ubuntu Template 12.04 requires a manual network start:
service networking start
sshd will not start:
/usr/sbin/sshd
PRNG is not seeded
mknod /dev/random c 1 8........
There was a problem importing one of the Python modules
required to run yum. The error leading to this problem was:
No module named yum
Please install a package which provides this module, or
verify that the module is installed correctly.
It's possible that the above module doesn't match the
current version of Python, which is:
2.7.9 (default, Apr 21 2016, 16:51:58)
[GCC 4.4.7 20120313........
Stopping httpd: [FAILED]
Starting httpd: httpd: Syntax error on line 73 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared obje........
Auction 262382440107: Cannot connect to URL : SSL connect error: gnutls_handshake() failed: Illegal parameter
Retrying...
esniper encountered a bug. It looks like your esniper version is not
current. You have version 2.28.0, the newest version is 2.31.0.
Please go to http://esniper.sf.net/ and update your copy of esniper.........
There are a few ways of doing this and all basically involve using the reverse proxy or "ProxyPass" feature of Apache to accomplish it.
1.) Create a normal vhost and simply symlink the root directory of the site you want to mirror.
Eg. originalsite.com and newsite.com
/vhosts/originalsite.com/httpdocs
You would symlink like this:
ln -s /vhosts/originalsite.com/httpdocs vhosts/originalsite.com/........
1.) Flash directly to this file:
http://tomato.groov.pl/download/K26RT-N/build5x-132-EN/Linksys%20E-series/tomato-E2500-NVRAM60K-1.28.RT-N5x-MIPSR2-132-Max.zip
*I was never able to get the larger "Mega" file to work, at least not initially so I recommend the file above.
To enable 5ghz I had to do the "Clear NVRAM" Option before it was shown.
2.) Or if you don't need 5ghz (most devices do not support it and cannot........
The below forces all request to your domain to go to the main non-www root domain.
Updated code:
RewriteCond %{HTTP_HOST} !=domain.com
RewriteRule ^(.*)$ https://newurl.com/subdir/$1 [R=301,L]
If you don't want it to go to a subdirectory:
RewriteCond %{HTTP_HOST} !=domain.com
RewriteRule ^(.*)$ https://newurl.com/$1 [R=301,L]
Bad code:
This code is bad beca........
This command in Debian/Ubuntu/Mint will get everything need installed for most Java based KVM viewers:
sudo apt install icedtea-netx
The following additional packages will be installed:
ca-certificates-java icedtea-netx-common openjdk-8-jre openjdk-8-jre-headless
It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post.........
Say you have a bunch of files like this:
file-01.jpg
file-02.jpg
...............
What if you want to mass rename them?
the rename tool can work just like sed
For Debian based distros:
Note "file" is what we search for and "newname" is what we replace it with, so substitute according to your requirements.
rename s/file/newname/ name-file-*.jpg
For R........
In plain English this happens after you upgrade VBOX and it rebuilds kernel modules based on a newer kernel than you are running (eg. you upgraded your kernel but haven't booted into it).
It is too bad there is not a standard work around that would allow it to realize this and keep old kernel modules and use them if it detects your current kernel is older than the most recently build modules.
===============
RTR3InitEx failed with rc=-1912 (rc=-1912)
The........
It sounds like this is corrected in later versions of the OpenVZ kernel but Iam not sure, it may also be that a much newer kernel is needed and Centos may not have a recent enough kernel.
*Debain 7.0 however does work fine as a temporary fix or work around.
Debian 8 OpenVZ no IP and networking not working:
lo Link encap:Local Loopback
 ........
The solution was to reinstall the vbox dkms package and do a manual modprobe of the modules it makes.
I never sorted out the unable to start due to the USB issue, I did have the guest additions installed but the only way to boot was to change the pointing device from USB to PS2 and then to disable the USB controller (if your pointing device is set as USB, disabling USB will not work because it will re-enable by default when it sees your pointing device is USB, this is w........
Iwas surprised to see that Linux Mint at the latest 17.2 version still has NO mdadm installer option, and worse the installer will not be able to create a proper booting environment even when you do install it.
How to setup mdadm in Linux mint LiveCD
sudo su
apt-get install mdadm
# partition as you need and then create your mdadm devices
# create your SWAP md0
mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /d........
sudo apt-get install zoneminder
[sudo] password for one:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libuser-perl python-evince kdebase-apps kwrite unixodbc
libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp
python-mediaprof........
It is as simple as using the "-k" option for:
-k, --keep-old-files don't replace existing files when extracting
--keep-newer-files don't replace existing files that are newer than
thei........
This happened while trying to delete several thousand users from phpBB and basically corrupted the innoDB tables.
InnoDB: Page lsn 3 881164362, low 4 bytes of lsn at page end 881164362
InnoDB: Page number (if stored to page already) 86920,
InnoDB: space id (if created with >= MySQL-4.1.1 and stored already) 0
InnoDB: Page may be an index page where index id is 700
InnoDB: (index "tid_post_time" of table "phpBBdb2005"."phpbb3_p........
It looks like newer versions of Centos no longer have encfs so you have to compile it, only it does not work and fails so those wanting encfs should probably use any other OS which supports it better.........
Are you getting the same old error message even though your iptables settings for OpenVZ are correct?
iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
The reason is because in newer vzctl the old way of setting IPTABLES="" in vz.conf is completely deprecated (I spent some time fiddling wondering why my settings were correct but........
Unable to mount iPad 4
Unhandled Lockdown error (-4)
This is because you need the libimobiledevice-utils package installed and a newer version of it.
My older Ubuntu 10.10 uses a version that does not have "idevicepair" which seems to work perfectly and automatically with newer versions of the library.
Basically if you install the above library it should be plug and play and if your imobiledevice-utils doesn't have 'idevice........
Many may ask why would you need to do this? When upgrading from phpBB 2 to 3 the conversion does not keep the admin user you create. If your old admin user has an email address associated that no longer works or is accessible this makes it impossible to reset the admin password.
Some may just say "I'll just manually edit the e-mail address" but it won't work and phpBB will fail to find that user if you don't update the "user_email_hash" field but how do........
To activate your Windows server trial which gives you 180 days:
Start ->Right Click (My Computer).
Click "Activate Windows now"
To renew your license for 180 days (can be done 6 times):
Start -> Type this command:
slmgr.vbs -rearm
Wait a few minutes until it says it is successful (unless you get that message it has not worked or been done)........
I used the matching 8.3.13 utilities and it didn't work but strangely the newer 8.3.16 which makes DRBD complain works just fine.
GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51
0: cs:SyncSource ro:Secondary/Primary ds:UpToDate/Inconsistent A r-----
ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5236960
&am........
# first we need a physical volume which we use the pvcreate tool to create
# I create mine on /dev/sdb3
pvcreate /dev/sdb3
dev_is_mpath: failed to get device for 8:19
Physical volume "/dev/sdb3" successfully created
# pvdisplay shows the newly created volume
pvdisplay
"/dev/sdb3" is a new physical volume of "1.35 TiB"
--- NEW Physical volume ---
PV N........
#count=10000 makes an image of 10000MB make sure your image is at least the same as your existing
dd if=/dev/zero of=yourimage.img bs=1M count=10000
# losetup -fv newimage.raw
# fdisk -cu /dev/loop0
# kpartx -a /dev/loop0
# dd if= of=/dev/mapper/loop0p1
# e2fsck -f /dev/mapper/loop0p1
# resize2fs /dev/mapper/loop0p1
# a lot of guides tell you to edit /etc/fst........
Iused the slightly older "304.117" version and it worked.
With the newest version Icouldn't get X to start and kept getting these errors in messages/dmesg.
[ 2346.083660] nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
[ 2350.608342] NVRM: RmInitAdapter failed! (0x12:0x2b:1831)
[ 2350.608354] NVRM: rm_init_adapter failed for device bearing minor number 0
[ 2350.608369] NVRM: nvidia_frontend_open: minor 0, module->open() failed, err........
I was having an issue with only certain random/jpeg files with the functions imagecreatefromjpeg imagecreatetruecolor and other related ones.
This issue was annoying basically it seems like a libgd issue/bug with newer versions of PHP and it was difficult to trace-out. One very useful thing that helped me was using "php-cgi" and passing the query string as an argument eg:
php-cgi images.php source=IMG.jpg (that way you get all the error messages wh........
sedcommand="$line"s
sed -i $sedcommand/.*/"$newline"/ $location
The variable "line"should be the actual line number you want to replace. The above format is necessary otherwise (to break the "$line"s into it's own variable for it to work.........
I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards.
My particular model came with the following:
2U Rack Mount Server with Rails
2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times)
16GB RAM
2 x 250GB Seagate SATA
2 x Dell Perc 6/i (horrible and a nightmare to work........
http://support.godaddy.com/help/article/668/registering-your-own-nameservershosts?pc_split_value=1
Log in to your GoDaddy Account.
Click on "My Account" at the top left.
Click on "Domains".
Click on the "Launch" button for the domain you want to create the nameservers for.
Find........
yum update error
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py", line 229, in user_main
errcode = main(args)
File "/usr/share/yum-cli/yummain.py", line 145, in main
(result, resultmsgs) = base.buildTransaction()
&nbs........
This happens all the time, you are reading from a textfile which has spaces eg:
datainfo 00
datainfo 11
If you do loop on it like this:
for info in `cat $file`; do
echo "info=$info"
done
It will treat datainfo and 00 as two separate lines:
info=datainfo
info=00
Obviously that's not what we want and there are many weird solutions in bash bu........
$newlist=str_replace("_"," ",$list);
The example above searches the "$list" string and replaces any "_" with a blank space "".
........
Client Log
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 192.168.1.253 [192.168.1.253] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type 1
debug1: identity file /root/.ssh/id_d........
This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel.
I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk.
I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one).
This is strange but it seems like this Xen PV guest has some sort of hidden or........
The best way is to use rsync, I've set it up so it doesn't copy unnecessary files, or at least ones I'm sure aren't needed.
Here is the rsync command Iused (adapt to your specific Thunderbird profile location):
rsync -hazv user@remotehost.com:/home/user/.thunderbird/sbrer.default/* /home/user/.thunderbird/4nyb0.default/ --exclude=global* --exclude=Cache --exclude=ImapMail --exclude=Mail
This is a great way to get your e-mail accounts going on a new c........
This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server).
You may need to upgrade to PHP5.3 to run Joomla or many other reasons.
Your host needs to use PHP 5.2.4 or higher to run this version of Jo........
So you've just purchased your SSL cert, renewed it and installed it or maybe you've had it installed and working fine all the time with all other browsers but you've upgraded to a recent version of Firefox and suddenly get the warning "Error code: sec_error_unknown_issuer" error.
This is terrible since if you bought an SSL cert, you are most likely using it for trust purposes for your business and obviously that message will scare away most potential customers.........
It's really silly how DA doesn't enable SSL by default but is otherwise a stable, fast and secure control panel.
Here's a copy and paste way of enabling SSL for Directadmin in just a few seconds:
*setup SSL
openssl req -x509 -newkey rsa:1024 -keyout /usr/local/directadmin/conf/cakey.pem -out /usr/local/directadmin/conf/cacert.pem -days 9999 -nodes
That creates the public certificate and private key pair in the location Directadmin expects to fi........
I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen.
I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........
I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene. This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately).
The most common reason may be that "linux-source" hasn't been installed automatically on my system. I tried to manually reinstall the........
Have you ever found a website/page that has several or perhaps dozens, hundreds or thousands of files that you need downloaded but don't have the time to manually do it?
wget's recursive function called with -r does that, but also with some quirks to be warned about.
If you're doing it from a standard web based directory structure, you will notice there is still a link to .. and wget will follow that.
Eg. let's say you have files in http://serverip/documen........
I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM.
I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives?
Also no swap space was ever used!
cat /proc/s........
It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work.
I only get this error with the openvz.repo and not others such as Centos-Base.repo
With my other server it works normally:
================
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename.]
grub> root (hd1,0)
Filesystem type is ext2fs, partition type 0xfd
grub> setup........
This assumes that you've at least created the correct partition for your DRBD already.
Notice that I am "diskless", that's because either your DRBD partition doesn't exist/has been renamed (eg. sdb becomes sda when sdb dies and you reboot) or because that drive is really actually dead/gone.
*If you need to permanently change the partition/device for your resource be sure to edit /etc/drbd.conf on both hosts and reload the config.
(replace r0 with........
yum -y install openssl* gcc-c++ gcc flex g++ make;wget http://www.directadmin.com/setup.sh;chmod +x ./setup.sh;./setup.sh
#enable SSL
/usr/bin/openssl req -x509 -newkey rsa:1024 -keyout /usr/local/directadmin/conf/cakey.pem -out /usr/local/directadmin/conf/cacert.pem -days 9999 -nodes
chown diradmin:diradmin /usr/local/directadmin/conf/cakey.pem
chmod 400 /usr/local/directadmin/conf/cakey.pem
sed -i "s/SSL=0/SSL=1/g" /usr/local/dire........
understanding /etc/aliases
*remember to apply changes you need to run "newaliases" after editing /etc/aliases
one thing I don't get is that it doesn't allow you to specify the whole e-mail address on the left-hand side
eg:
yourfullemail@domain.com: someotheremail@domain.com
postalias: warning: /etc/aliases, line 109: name must be local (if you try the above)
It works more like this:
your........
CPU/Kernel/MB/RAID problem?
Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168]
Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........
Webmin Setup Centos 5:
wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet
[1] 24229
[2] 24230
[root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html
Resolving downloads.sourceforge.net... 216.34.181.........
I've only used it on Centos, soI thought I'd make a quick Debian guide:
Install the DRBD Package
apt-get install drbd8-utils
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libswfdec-0.8-0
Use 'apt-get autoremove' to remove them.
The following........
I'm mentioning this because I keep forgetting what port the management is on for the web interface (since newer releases of VMWare server took away the superior stand alone client).
So remember it is port 8333 and sometimes you need to restart vmware-mgmt service and also enable sslv2 in your Firefox or it won't connect.........
I wanted to Import/Use a .vmdk hard disk image file from VMWare. Generally you can just "point" VirtualBox to it and use it and it will work but I found an exception.
One of my Centos 4.4 x64 images wouldn't boot. I had two copies, an older one and the newer one. The older one booted as normal (once I changed the VirtualBox driver to IDE from SATA). The newer one stopped at the "GRUB loading" message no matter what I tried.
As far as........
yum exits in the middle
The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either.
echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk
L........
The solution is simple but it's a wonder why VBOX doesn't address it directly?
Perhaps newer versions will but you have to add your user to the "vboxusers" group and then login and logout and you'll see the devices you wanted but couldn't access are now available.
The weird thing is that the grayed out issue doesn't happen with all devcies but one notable thing is the Apple iPhone especially in DFU or Recovery Mode which is an big issue for some people.........
I couldn't figure out whyI couldn't install a simple package. This is what's annoying about cutting edge Debian distros, yes we know you support each license on average for 1-2 years but why take down the supporting binary packages and basically disable the older versions?
sudo apt-get install update
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find p........
After an upgrade wine wouldn't open anything, not even the pre-installed notepad.
There are no wine logs and nothing is mentioned in any standard log file about why.
I finally decided to run wine from the shell and see what's going on:
wine client error:0: version mismatch 398/402.
Your wineserver binary was not upgraded correctly,
or you have an older one somewhere in your PATH.
Or maybe the wrong wineserver is still running?........
/usr/local/cpanel/bin/swapip domain(s)
It simply doesn't work, the Apache VHOSTS remain 100% unchanged, why does this script exist? I'm sure it would work from the control panel but I am locked out because my IP was changed and it doesn't match the CPanel license. I wish CPanel would make it easier to update the license IP.
I even took it a step farther, I manually edited the vhosts and restarted Apache and it........
I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project.
Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is.
I just want to a directory that had the MP3's I wanted t........
I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL.
Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you.
apt-get install rcconf
Reading package lists... Done
Building dependency tree
Reading state information... Done........
One note is to secure MySQL, I don't know for sure but I believe you could login to MySQL remotely with no password during this operation (I'm not sure, maybe it doesn't accept blank passwords but I firewall MySQL port anyway and recommend you do the same).
First edit /etc/my.cf
Under the [mysqld] field add the following line somewhere:
skip-grant-tables
Now restart mysql: service mysql restart or on Debian sty........
I successfully created a single RAID 1 partition which includes /boot inside it and my root directory through the Debian installer. It said GRUB installed successfully but when I try booting the OS it seems GRUB can't read anything.
When trying to boot from GRUB
GRUB Loading stage 1.5.
GRUB loading, please wait...
Error 2
I get "Error 2" when trying to boot Debian. I also notice from a LiveCD that........
I installed 5.5 with a 300GB RAID 1 partition (boot is also on this partition). It booted up fine the first few times until after I used a Live CD and accessed the array, and it became named /dev/md127 for some reason.
Now whenI boot into CentOS I get a kernel panic and different errors, once I got "invalid superblock", even though the array is fine (it didn't happen again, probably because I was sure to dismount and stop the mdadm array properly).
Here's what........
It's not just as simple as running the chroot command, you need to ensure the /proc and /dev entries are passed through and populated to the chroot environment.
Step 1 - Mount Your Off-lineOS
mount /dev/sda1 /mnt
Step 2 - Mount Proc
mount -t proc none /mnt/proc
Step 3 - Mount Dev
Most guides will tell you to use this: mount -o bind /dev /mnt//dev but that doesn't work for some reason in many cases:
mount: wron........
It's very common to have multiple GCC versions for different reasons, as annoying as it is. Some newer/older programs only compile properly or at all on specific versions.
You can export the following variable CC:
export CC=gcc-4.1
Replace gcc-4.1 with the filename of the gcc you want eg. gcc-99........
In Debian based distros:
apt-get install jabber
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
fakeroot dkms
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
jabber-common
The following NEW packag........
I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find.
yum search ftp
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirrors.netdna.com
* updates: updates.interworx.info
* addons: yum.singlehop.com
* extras: mirrors.netdna.com
rpmforge........
PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist:
[code:1:1fd0f3abbe]
if (!file_exists($OPENSSL)) {
//echo "ERROR: OPENSSL $OPENSSL not foundn";
}[/code:1:1fd0f3abbe]
I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
Telus + 2Wire 2700 Router HorribleWell first of all let me say this is the only router/switch that sometimes seems to crash/disconnect computers on the local network.
This device also thought it would be smart to block VOIP packets coming from my Sipura ATA VOIP adapters so I disabled the [quote:cb89ba7bff]"Invalid TCP Flag Attacks (NULL/XMAS/Other)"[/quote:cb89ba7bff] option
Then all of a sudden I couldn't get onto any web pages, the wireless........
Need identd for port 113 ? Install authdyum install authd
Happy identing :)Actually it's not that simple.
It installs as an "xinetd" service and is disabled and turned off by deafult.
To enable it run:
[code:1:8c94df8319]
chkconfig --level 3 auth on
service xinetd restart
[/code:1:8c94df8319]
This will set identd aka authd to start by default.
service xinetd resta........
How to compile in Windows/DOSMingW is a free compiler project so start here:
http://www.mingw.org/download.shtml#hdr2
I downloaded the core GCC compiler:
http://prdownloads.sf.net/mingw/gcc-core-3.4.2-20040916-1.tar.gz?download
But it's missing even the standard C runtime libraries like "stdio.h"!
You may also need to add environment variables from the DOS command line.
Here is a simpl........
Vonage & Linksys Offer Trade-In ProgramVonage & Linksys Offer Trade-In Program
Monday, June 13 @ 09:22:36 PDT
Vonage is offering customers a way to get a free 802.11g router when they turn in their old one.
advertising
For a limited time, customers can trade-in their used router – any brand, any model – for a Linksys Wireless-G Router with 2 Phone Jacks for broadband telephony (WRTP54G) for free (after rebates), when they si........
Changing field names[quote:91ea6831b6]ALTER TABLE [u:91ea6831b6]table_name[/u:91ea6831b6] CHANGE [i:91ea6831b6]existing_field_name[/i:91ea6831b6] [b:91ea6831b6]new_field_name[/b:91ea6831b6] INT(11);[/quote:91ea6831b6]........
Create Table with structure of another existing tableOk, this has many valid uses such as if you need to create backups or the ability to undo changes, you would want to create new tables with the same structure as another. Here is how you do it.
[i:7ed9581493]
Also remember Indexes such as PRIMARY KEYS [b:7ed9581493]will not be preserved[/b:7ed9581493] so you will have to readd them manually.[/i:7ed9581493]
[code:1:7ed9581493]CREATE TABLE NewName AS SEL........
Other Security Web SitesSeveral websites actively track security issues. This list provides you with the major providers
of security information on the Web. Many of these organizations also provide newsletters and
mailings to announce changes or security threats:
Center for Education and Research in Information Assurance and Security (CERIAS)
CERIAS is an industry-sponsored center at Purdue University that is focused on technology and
relate........
Nice Search Engine Optimization Toolshttp://searchenginewatch.com/facts/article.php/2156041
I quickly checked this out and I like the Google tool that helps you determine the popularity of certain keywords and then it gives you other related search terms that those people used to search with.
Excellent :)........
*This is a bug with initramfs support, all kernels after around 2.6.27.54 suffer from this problem.
If you try to include initramfs into your kernel (I mean actually building your binaries into the kernel) this will always happen. Obviously some code has changed in recent kernels that is present in all new kernels, it makes it impossible to boot
I've tried the latest 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36, 2.6.37, 2.6.38 kernels and they all do this. I found one bug re........
NewEgg is one of the few companies that stocks this great right angle 1U SATA power cable. I've purchased some no-name ones and they face the wrong way (towards the bottom of the chassis) which makes it worse/impossible than standard SATA connectors.
The price is high but if you're building a 1U server and want SATA disks and don't have much space (eg. the 1U Supermicro cases) then these are simply a must and........
Shortcut/Easiest Way To Create A Self-Signed Key:
openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key
Using the above, you instantly create a self-signed certificate valid for 1530 days and you can simply skip to step #5.) below.
If You Need a Real SSLCertificate (eg. Equifax/Openssl) then you need to create a CSR request (you'll need to follow Steps 1.) and 2.) in order to create the CSR. You then upload the CSR Certi........
top - 09:34:12 up 2 days, 20:57, 2 users, load average: 1.83, 1.99, 2.03
Tasks: 59 total, 2 running, 57 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.3%us, 0.0%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st
That 99.7% wa is iowait, it means the server is waiting for a process to complete an IOoperation or in plain English, there is a delay in........
User username from 127.0.0.1 not allowed because not listed in AllowUsers
What's going on? The user was created properly, it has been defined as having a shell entry and the entry for /etc/passwd and /etc/shadow is set just fine.
This is a new and very smart/secure feature of SSHD. It is simple and yet effective, but also very annoying if you didn't know about it being implemented and that hand editing of /etc/ssh/sshd_config is required to allow a newly add........
http://searchenginewatch.com/2165111
This was an interesting article and people should be wary of Google's power. Google's policies and actions against competitors borders on anti-trust, far worse than Microsoft.
They are doing the right thing for all of us, Google says selling advertising and links is bad for search engines, yet they don't penalize sites who use AdSense.
........