In a lot of distros, vdpau which accelerates video through the GPUis often not installed even in recent distros. This will result in Firefox with Youtube dropping frames when you check the "Stats for Nerds" and to the eye as jerky or slower video playback due to the dropped frames.
Some sites will say that because you are watching VP09 that there is no GPU support, but with vdpau installed and enabled, many GPUs will still be able to use hardware decoding for 4K........
This is certainly a poor design, as you can read many seasoned admins who have updated their iDRAC only to have it killed. One possible cause is not by doing all the incremental updates, doing updates from an old iDRAC to one many revisions newer is a sure way to kill things, but even then there is no guarantee based on the amount of failures.
List of threads of people's dead iDRAC's:........
This guide assumes you have a working Postfix server and want it to sign with DKIM.
There are a few things we have to understand to make all of this work though, which require you to be familiar with DNS as well.
1.) Install OpenDKIM
apt install opendkim
systemctl enable opendkim
2.) Edit /etc/opendkim.conf
Syslog yes
SyslogSuccess yes
Mode&nbs........
apt install tftpd-hpa
#change TFTP_ADDRESS to by setting address to 192.168.1.1:69 or the IP you need, otherwise it will listen on all IPs and interfaces which could be a security risk.
# edit /etc/default/tftpd-hpa
TFTP_USERNAME="tftp"
TFTP_DIRECTORY="/srv/tftp"
TFTP_ADDRESS="192.168.1.1:69"
TFTP_OPTIONS="--secure"........
This sometimes happens when trying to install the EFIversion of grub to a device when you are booted into Legacy/MBR mode. It doesn't seem to occur on all machines, but some and seems somewhat BIOS dependent.
grub-install --target=x86_64-efi /dev/sda
Installing for x86_64-efi platform.
grub-install.real: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
grub-install.real: warning: Couldn't find physica........
This can break things easily in remove environments where it was normally easy to convert a normal eth0 to a bridge under br0, and that bridge would normally have the same MAC address by default, which is desirable for most situations.
In Debian 11 this is different for some reason now.
https://unix.stackexchange.com/questions/681013/bridge-gets-random-mac-........
sysctl vm.overcommit_memory=1
echo never > /sys/kernel/mm/transparent_hugepage/enabled
echo 511 > /proc/sys/net/core/somaxconn
1:M 26 Nov 2023 21:34:33.840 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
1:M 26 Nov 2023 21:34:33.840 # Server initialized
1:M 26 Nov 2023 21:34:33.840 # WARNING overcommit_memory is set to 0! Background sa........
Assign way more replicas than you have of memory on all nodes and watch the Swarm crash which can easily reproduce in a small VMfor testing.
root@Deb11Docker01:~# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAM........
You can do a static lease that is tied to the MAC address but what a lot of users prefer is that they come into the office or lab the next day and that their device gets assigned the same IP address (if possible).
As we can see in the dhcpd logs that there is threshold that is defaulted as we'll show later. Whatever the threshold is set at, if the lease is younger than the threshold, it will keep the same lease. In other words, if the device goes to sleep or is powered off........
This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525.
Then nvidia-modeset goes to 100%
There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines.
https://forums.de........
Sometimes users take their removal drives and unplug and replug them to test what happens during the failure of a disk. However, this breaks things quite badly due to the /dev/mapper in LUKS not coming back online due to it not being closed.
In other words, generally with non-encrypted drives the process is smooth but when encrypted you may want to follow a strategy like this:
We can see below that both disks are unavailable as they were physically remov........
Even today we see a lot of servers that have different services and ports open for rpc and this creates not only potential inward vulnerabilities but perhaps more common, the abuse of your network resources in reflective rpc queries.
To stop this problem, you should disable and remove all services relating to rpc or at least block all relevant ports for the service.
Surprisingly, there are still some providers and OS installs in Linux that install these services and leave them........
Have you ever tried mounting a partition that you exists but you get this error?
mount: /mnt: can't read superblock on /dev/sda1.
The superblock in this example was bad because the physical disk had corruption and bad blocks/sectors. However, the data was generally accessible and you can always try this trick below (with caution and no warranty).
This is specifically for filesystems that place superblocks in multiple locations, which........
convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244.
convert-im6.q16: cache resources exhausted `/tmp/magick-27777Al6FGY7dhyKt10' @ error/cache.c/OpenPixelCache/3984.
convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244.
convert-im6.q16: cache resources exhausted `/tmp/magick-277772Y_-pJnMdT2r1' @ error/cache.c/OpenPixelCache/3984.
convert-im6.q16: Distr........
This is a weird issue as sometimes when upgrading or even migrating, this could happen and the reason is simple but maybe not 100% obvious at first.
You will find that your GUIdoesn't load and most services fail to start, even logind
Here are some errors you may see:
Mar 13 22:22:23 rttbox systemd-logind[2892]: Failed to connect to system bus: No such file or directory
Mar 13 22:22:23 rttbox systemd-logind........
Is python3-pip pip3 not working anymore?
Traceback (most recent call last):
File "/usr/bin/pip3", line 11, in
sys.exit(main())
File "/usr/local/lib/python3.5/dist-packages/pip/__init__.py", line 11, in main
from pip._internal.utils.entrypoints import _wrapper
File "/usr/local/lib/python3.5/dist-packages/pip/_interna........
A lot of companies are unsure which solution to choose and many may not be aware of Docker Swarm as an alternative to Kubernetes. One thing that many Sysadmins find is that Docker Swarm is simply easier, quicker to setup and maintain by far than Kubernetes.........
When Is It Time to Leave Your VPS, VDS, and Dedicated Server Provider?
Choosing the right hosting solution—be it Virtu........
In today’s digital landscape, finding a reliable and secure Virtual Private Server (VPS) or Virtual Dedicated Server (VDS) goes beyond just comparing specs and prices. With increasing concerns over data privacy, security breaches, and government surveillance, the wisdom of choosing your VPS/VDS provider based on juri........
This will be the goto to help solve e-mail delivery issues and talk about many practical issues that happen between developers, admins and scripts that send e-mail and do things that may not be acceptable or cause deliverability problems.
Sendmail Stuff
Edit /etc/mail/sendmail.mc
The problem is that if you send directly out from the server using the mail function, the Return-path of the e-mails will be username@thehostnameoftheserver.com. Let........
First we need a few extra packages:
apt update
apt install -y adduser libfontconfig1 musl sudo
wget https://dl.grafana.com/enterprise/release/grafana-enterprise_10.3.1_amd64.deb
Install / Enable Grafana
dpkg -i grafana-enterprise_10.3.1_amd64.deb
dpkg -i grafana-enterprise_10.3.1_amd64.deb
(Reading database ... 44309 files and directories currently installed.)
Preparin........
find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV"
Africa/Addis_Ababa
Africa/Abidjan
Africa/Blantyre
Africa/Lusaka
Africa/Casablanca
Africa/Libreville
Africa/Asmara
Africa/Bujumbura
Africa/Dakar
Africa/Lagos
Africa/Malabo
Africa/Harare
Africa/Kigali........
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --output=aclocal.m4t
Can't exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 326.
autoreconf: failed to run aclocal: No such file or directory
make: *** [/software/pixman/configure] Error 1
Just install automake:
yum install automake........
Step 1.) Upgrade to Debian 11 first
The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful.
Step 2.) Update sources.list
Update your /etc/apt/sources.list like this:
deb http://........
If you have swarm services and dockerd is creating a high load even with the containers just being idle, the easiest solution is to upgrade to a newer docker version.
For example an identical config of 3 nodes, with Redis 5 with 30 replicas produces a load of about 1.45 in Debian 10 with Docker18.09.1
If I create the same setup on Debian 11, with Docker 20.10.5+dfsg1 then the CPU usage is low.
One other difference I wondered is the kernel. In my test setup........
If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing.
The above results in this less than obv........
This should work for most console ports of other manufacturers too. It is a quick and simple method for emegencies or deploying a few appliances/devices in a non-standard environment or small environment.
However, if this is a route thing, or the equipment is not physically close to you, it would be best to use some sort of "Terminal" server which is an IP connected switch with several serial ports built-in for this purpose. Normally they accessible by web/........
The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself.
I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all.
docker run -it --runtime=nvidia --gpus all ubuntu bash
These works for most images li........
Welcome to our in-depth guide on configuring NVIDIA GPUs with Docker on Ubuntu. This post is tailored for developers, data scientists, and IT professionals who are looking to leverage the power of NVIDIA's GPU acceleration within Docker containers.
Whether you're working on machine lea........
You'll notice that /etc/resolv.conf contains dire warners on most Linux Desktops.
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# This is a dynamic resolv.conf file for connecting local clients to the
# internal DNS stub resolver of systemd-resolved. This file lists all
# configured search domains.
#
# Run "resolvectl status" to see details about the uplink DNS servers
# currently in use........
Just in case, it is reocmmended to backup the original contents of the directory (especially your home dir) before proceeding.
Setup ecryptfs
Run this command: ecryptfs-setup-private
It will ask you for your login password, this is so that when you login, everything is automatically decrypted by using a passphrase that is wrapped with your login.
You can hit enter and leave things blank for an autogenerated passphrase (for mounting) or you can en........
Just hit **# on the keypad and the CIPCwill enable the button in settings for a factory reset. Sometimes the phone may run into issues or may be unable to register to another tftp server (eg. another CME or CUCM server) due to a bug or maybe due to the security settings tying it to a specific server.
Step 1 - Click Settings
Step 2 - Hit "**#"........
How to check what kernel version you have/currently running?
uname -rm
5.4.0-91-generic x86_64
The above shows us that we are running 5.4.0-91-generic on the x86_64 architecture.
The safest way is to stick with the same flavor eg if you're on generic, and say on kernel 5.4.0 then it makes sense to follow what is below. However, if you are migrating or dual booting between newer hardware (eg. you got a........
The issue is when you need to echo something as root/sudo, that it doesn't work. You can never do a sudo echo to an output file as you'd expect.
Take an example to clear out wasted RAM buffers/cache like this:
sudo echo 1 > /proc/sys/vm/drop_caches
-bash: /proc/sys/vm/drop_caches: Permission denied
The solution is to run tee as sudo/root
What we do is echo 1, but then pipe it to the "tee" command as sudo........
Getting this error "bash: apt-add-repository: command not found"?
You need to install the software-properties-common to solve the error:
sudo apt-get install software-properties-common........
A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version.
Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended):
Step 1 - Add the repo
apt-add-repository ppa:deadsnakes/ppa
If you get an error about requests then install it:........
This sort of thing normally happens your python3 or pip3 has been updated, because you have to in order to use pip, but the newer pip now breaks compatibility with your old python (3.5 in this case).
There are a few solutions, the easiest is perhaps to upgrade to a newer OS with a newer distro provided Python 3 or to manually install a newer version of Python/OR use a PPA like deadsnakes that provides newer versions.
........
haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx.
haproxy is used by many large sites per Wikipedia:
HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........
If you are installing ta-lib for Python and get this error then you can normally solve it by manually getting the ta-lib source files and compiling.
tar -zxvf ta-lib-0.4.0-src.tar.gz
cd ta-lib;./configure;make;make install
Collecting ta-lib
Downloading https://files.pythonhosted.org/packages/39/6f/6acaee2eac6afb2cc6a2adcb294080577f9983fbd2726395b9047c4e13ec/TA-Lib-0.4.26.tar.gz (272kB)
&nbs........
This has been a tried and true method for Windows because it is finicky with hardware changes without a reinstall (eg BSOD on boot is what happens 9/10 times unless you move to the same hardwar). Surprisingly, if you use a QEMU VM and do a standard install, it has worked in every system I've thrown the drive in afterwards.
So the play is this, use a USB SSD, physical SATA drive plugged internally or for convenience, you could use a SATA to USB adapter on another computer to perf........
Be very careful about what filename you specify in dhcpd.conf if you get an error like this:
NBP filesize is 0 Bytes PXE-E23:Client received TFTP error from server.
If you specify "BOOTx64.efi" then the file had better not be called "BOOTx64.EFI" as it is case sensitive. It's really a case of th........
1 - Install Vagrant
apt install vagrant
Make sure you have a supported Virtualization tool like Virtualbox or VMWare, Hyper-V etc.. It automatically detects and uses what you have. Virtualbox has a lot of support here with tons of images.
2 - Init Vagrant
We'll init to have a Debian 10 box by default to show how quick and easy it is.
vagrant init generic/debian10........
Virtualbox is a very powerful tool, but for some use cases it is less than optimal.
Say you are in a work, lab or other environment where you are not alone on the physical network and there could be overlap of IPs, but you need all of your VMs to be contactable from your host, VMs need to communicate with each other, and VMs need internet.
NAT Network will give you VM to VM communication and internet, however, it is buggy and unstable. It also doesn't allow host to VM co........
In this example we install debian 10 with --variant=minbase which gives us a minimal/tiny install. Don't use variant if you want the full size install.
mkdir /tmp/deb10files
debootstrap --variant=minbase buster /tmp/deb10files/
Did you get an error?
debootstrap --variant=minbase buster /home/theuser/VMs/deb10files/
You'll get this error if you make a directory in your home........
This can be a real pain when automating things and you do an apt install and some packages ask a lot of questions.
Make sure you set this variable when running:
DEBIAN_FRONTEND=noninteractive
Remember as well that if chrooting you will want to run like this:
DEBIAN_FRONTEND=noninteractive apt install -y yourpackagename
........
So say you happen to have 2 NICs of the exact same chipset, they will generally show up as the same name, with possibly a different revision in lspci. Normally this is not an issue if you have a server with 4 NICs, generally the eth0 to eth3 appears from left to the right (or right to left on some vendors) so it doesn't take much figuring out.
Generally if you have different chipsets for different NICs, it should be easy to know which one is eth0 or the first NIC in the OS.........
If you find your NAT Network is not working properly, the first thing you may want to do is list the networks, check their status and make sure the Network is actually started and configured as you expect (eg. is DHCP on and enabled?).
This is a long known, unresolved bug that seems to affect Version 6 randomly and disportionately on especially Mint 20/Ubuntu 18.
https://www.virtualbox.org/ticket/1474........
Are you new to the company, datacenter or a third party who is responsible for deploying a fleet of servers from scratch.
The first step is to normally login to the KVM so you can perhaps manually reinstall, PXE boot the Cloud Image or reimage/reinstall an OS but you need access to the KVM/IP or what Dell calls iDRAC.
It's common that you may have forgotten this information or that another employee or colleague has changed the info and did not tell you, that they have left the........
If you are converting a generic wifi IP camera to ethernet, it may not be that simple as many are default hard coded to a static IP of 192.168.1.168 and login info admin/admin.
From there you can login to the camera and assign it to DHCP by going to http://192.168.1.168
For security these cameras +DVR should be on a separate untagged VLAN or if possible a physically isolated non-internet connected switch/network.
The reference below is applicable to many of the r........
The easiest way for the current running kernel is:
update-initramfs -u -k `uname -r`
You could change -k to a specific kernel name if for some reason the current is not running (eg. if you are chrooted or in recovery mode).
If you want to update all kernels then use "-k all"
update-initramfs -k all -u
update-initramfs: Generating /boot/initrd.img-5.4.0-162-generic........
Sometimes due to your BIOS/EFI you may find that you have chosen "Energy Efficient" for your CPU which may effectively disable turbo mode. This is because "Energy Efficient" will often restrict or throttle your CPU to the base speed. This can impact nearly any CPU such as Intel's, AMDs, Opteron, Xeon etc...
This is of course frustrating, for example if you have a CPU that is 2.0GHz base speed but turbo to 2.5GHz, you will never hit more than 2GHz.........
Solution for python pip3 not working anymore
from pip._internal.cli.main import main
File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60
sys.stderr.write(f"ERROR: {exc}")
wget https://bootstrap.pypa.io/pip/3.5/get-pip.py
python3 get-pip.py
DEPRECATION: Python 3.5 reached the end of its life on September 13th, 20........
pip3 install requests
Traceback (most recent call last):
File "/home/user/.local/bin/pip3", line 7, in
from pip._internal.cli.main import main
ModuleNotFoundError: No module named 'pip._internal'
As a quick and temp fix call the OS installed python and not the user .local/bin installed pip3
/usr/bin/pip3 install requests
Collecting requests
Cache e........
It may appear to be an Xorg or lightdm/gdm/mdm error but in reality for many users with this issue, it's a driver conflict and issue. I had a system that had two GPUs, an Intel and Nvidia GPU.
The only thing that got it working was to remove the nouveau driver and blacklist it so it never came back, then the Intel GPU works fine without these issues.
Solution
sudo rmmod nouveau
add nouveau/other driver to blacklist
edit th........
A quick fix is to run this command:
sudo brctl setageing br0 0
This causes the aging of the MAC address to time out immediately or in 0 seconds, which delete the entry frmo the FDB (Forwarding Database) and causes the error to go away. The default time is 300 seconds or 5 minutes.
You can also add it under your br0 definition like this in /etc/network/interfaces to make it permanent and automatic:
auto br........
NetworkManager is normally good for GUI users who may not be good with manually confguring devices, but if you are using things like bridging and bonding, it will often break things.
How To Disable NetworkManager
systemctl disable NetworkManager
Now that it's disabled you will need to stop NetworkManager. NetworkManager will still be running until you reboot next or manually stop it.
How To Stop NetworkManager
systemctl stop........
Usually LIbreoffice gets it right, but if it opens a normal English CSV as UTF-16 by default and shows Asian languages, you'll have ot manually open to fix it (don't double click the file from the File Manager).
Solution - Manually Open the File After Opening LibreOffice Calc
You'll see it is defaulting to UTF-16 which breaks everything.
........
Just use apt-cache policy to find the repo of a package:
apt-cache policy lxd
lxd:
Installed: 3.0.3-0ubuntu1~18.04.2
Candidate: 3.0.3-0ubuntu1~18.04.2
Version table:
*** 3.0.3-0ubuntu1~18.04.2 500
500 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages
&nb........
The display manager is more so what controls the main graphical login process after Debian/Mint/Ubuntu boot and controls the graphical login sequence. Once you login, you are then usually passed to an Xorg based Window manager like XFCE, Mate, Ubuntu etc...
Popular display managers are mdm, gdm, lightdm etc... and they all basically do the same thing with a different interface/style and some feature differences.
In Mint for example the normal default display manager is l........
You just add on "non-free" at the end of each repo, like the example below:
If you wanted contributed packages then you could also add "non-free contrib" to each repo line.
Don't forget to do an "apt update" to see the new packages, this is especially handy for getting more drivers for devices with the firmware-linux-nonfr........
If you get an error like this when installing the Nvidia drivers:
WARNING: Unable to determine the path to install the libglvnd EGL vendor library config files. Check that you have pkg-config and the libglvnd development libraries installed, or specify a path with --glvnd-egl-config-path.
Just install these packages: &nbs........
Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows.
There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........
If you are using mint, delete the preference that stops snap from installing (as it is required for lxc)
sudo rm /etc/apt/preferences.d/nosnap.pref
1. Install lxd:
sudo apt install lxd
Issues install lxd or errors? Click here
Debian at this time does not have lxd so you'll need to use snap:
sudo apt in........
This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory.
Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage.
One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........
If your audio is not working and you got this in your syslog:
pulseaudio[13710]: [pulseaudio] sink-input.c: Failed to create sink input: too many inputs per sink.
The issue is generally caused by too many audio inputs, or in other words you have too many applications that are hooked into pulseaudio.
An easy and notorious offender is by having dozens of Firefox browser tabs open.
Solution:
Close all of your Firefox and the problem will........
Let's say you have a VM file that uses 200G of dynamic space, but really only has 40G in usage. If you add fles and delete, at some point the file will be larger than the current space you are using.
Take this image which shows is using 71G of space on the host:
The actual space being used inside the image is about 43G as we can see:........
This may be necessary if you have a VM or if for some reason you just want to be more efficient with your space and have the flexibility of changing your swap space at will.
What we mean is the ability to use a "swap file" or similar to the Windows "pagefile" that normally resides on the root or c: partition of Windows.
Here's all you have to do and then you to can have a single partiton with everything, including the swap file on the root partition if you........
This happens during an apt update and is related to an issue with sources.list, which is particularly troubling, if you are doing a "live-build".
P: Configuring file /etc/apt/sources.list
Hit:1 http://deb.debian.org/debian bullseye InRelease
Get:2 http://deb.debian.org/debian bullseye-updates InRelease [39.4 kB........
freshclam
ClamAV update process started at Sun Mar 20 00:30:50 2022
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.100.3 Recommended version: 0.103.5
DON'T PANIC! Read https://www.clamav.net/documents/upgrading-clamav
main.cld is up to date (version: 62, sigs: 6647427, f-level: 90, builder: sigmgr)
WARNING: getpatch: Can't download daily-26337.cdiff from db.local.clamav.net
WARNING:........
(firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory)
ExceptionHandler::GenerateDump cloned child 9743
ExceptionHandler::WaitForContinueSignal waiting for continue signal...
ExceptionHandler::SendContinueSignalToChild sent continue signal to child
[Parent 9562, Gecko_IOThread] WARNING: pipe error (40): Connection reset by peer: file /build/firefox-EymEXX/fire........
Install procps and it will install the other packages you need:
apt install procps
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
libgpm2 libncurses6 libprocps7 lsb-base psmisc
Suggested packages:
gpm
The following NEW packages will be ins........
There is a random bug that sometimes occurs with Vbox NAT mode DNS, although it has never happened in the past and Vbox was working fine until recently.
The symptom is that you can see it does get an IP+ DNS from the Vbox NAT DHCP.
Below we use resolvectl dns and verify the DNS server is set to 10.0.2.3 which is the DNS from Vbox NAT. We can ping it but it does not respond to any DNS requests when we use dig @10.0.2.3 realtechtalk.com........
The Best Docker Tutorial for Beginners
We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........
Just click on the Start Menu and go to "Startup Applications"
Then click on the "Add"Button
Now enter the command we need to open the folder/directory automatically using the filemanager
For remote SSH host (you need pub key auth for it to open without a pa........
Why choose OpenVPN instead of a firewall appliance?
OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time.
When comparing OpenVPN with traditional firewal........
In our 2024 VPS Server/Cloud Buyer's Guide, we place the location of your VPS/hosting/server as one of the priorities that is often overlooked.
2024 Update - Datacent........
The key is that you need to know the passphrase to do it, if you don't know the password for the key then you can't remove the key since it cannot be decrypted.
ssh-keygen is the easiest method and openssl can be used to manually remove the key and output it to a new file, which you can then copy back over top of the encrypted file.
After that your public key authentication will work without any password prompt because it is no longer encrypted. Make sure you understand........
These types of errors are normally caused by misconfiguration of your /etc/apt/sources.list.
In this example on Debian 10, if you didn't complete the install correctly, you will have no repos enabled and only rely on CDROM.
"Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source.
E: Package 'wget' ha........
You might assume you have a bad drive or the SATA interface/cable is bad, or the power supply is bad/weak to the drive. These are all possible issues, but definitely check your SATA cable for "twisting". It is a big issue because until the error stops or times out, your system will not boot (in my case this was the case even though the drive with the issue was not part of the OS or booting process at all).
If you run an open rig that you move around often that ha........
How To Install Wazuh Server / Quickest Installation
Wazuh (forked from the well known OSSEC project) is a full SIEM (Security Information Event Management) that works extremely well with the platforms it natively supports as an "Agent", which allows you to do scans of everything such as all processes running, CVE vulnerability check, incident reporting etc...
Prerequisites:
A lot of issues with Wazuh seem to be caused by i........
If you get an error that you aren't in the sudoers file, this typically means that your user is not designated as an admin with sudo privileges.
In plain English, when it comes to some OS's like Debian including 10,11 etc.., by default the user is created without special privileges which is contrary to how Ubuntu/Mint handle the secondary user.
Let's check the sudoers file to see the problem.........
1. Let's work from an environment where we can install Ansible on.
If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way:
sudo apt install gpg
sudo add-apt-repository ppa:ansible/ansible
sudo apt update........
This normally happens when you interrupt the install of Ceph:
pveceph install
update available package list
start installation
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
gdisk is already the newest version (1.0.6-1.1).
ceph-common is already the newest version (15.2.15-pve1).
ceph-fuse is already the newest version (15.2.15-pve1).
Some package........
Are you getting this error in Proxmox while trying to apt update or install Ceph?
apt update
Hit:1 http://security.debian.org bullseye-security InRelease
Err:2 https://enterprise.proxmox.com/debian/pve bullseye InRelease
401 Unauthorized [IP: 144.217.225.162 443]
Hit:3 http://ftp.hk.debian.org/debian bullseye InRelease ........
How To Install Ceph
If you stopped an install of Ceph midway you will need to manually restart it with "pveceph install"
Remember that your VM needs to have working internet (gateway) and DNS in order to connect to the apt repo to download all of the packages that Ceph requires.
Remember to repeat these steps for each node that you want Ceph on.
........
Here is the scenario, you are using QEMU/KVM and are using something like the AC97 sound driver to pass the host audio to the guest via pulseaudio. This is useful because you can transparently pass your mic input from the host which means you can mute your microphone from the host, which prevents the guest from receiving any mic input even if unmuted.
Mute / Unmute Fix
This issue also seems to happen even if you press the mute button on the microphone and then unmute,........
In newer of versions of Virtualbox, especially above 6.0 (eg. 6.1 like the example below), a lot of times the "Enable Nested VT-x/AMD-V".
If you are having this issue, you will see the option is grayed out. It doesn't mean that your computer does not support virtualization, although it is possible it is disabled in the BIOS. You can verify........
NAT Network, the VMs can communicate but your host cannot access them by default.
NAT VMs have internet but cannot communicate with each other.
Bridged is simple and allows full LAN access as if you had a physical machine plugged in but is often bad for testing, work or corporate environments and is not very portable when it comes to moving your VMs to other locations and networks.
Here is how you can use NAT Ne........
From the terminal do this:
cat /proc/cpuinfo|grep -E "svm|vmx"
You should get output like this(svm = AMD-v and vmx=Intel-VTx):
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqd........
The Linux Mint team has disabled it by setting an apt preference, you can edit or just remove the file:
sudo apt install snapd
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package snapd is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source........
Just install these packages and restart the VM:
1.) Enable guest-utils on the host side:
sudo apt install virtualbox-guest-utils virtualbox-guest-x11
2.) Enable guest editions on the VMside
This must be done for each VM that you want to have the guest additons for accelerated GPU performance and for drag and drop/clipboard sharing
First insert the Guest Addtions CD image........
Kubernetes Easy Beginners Tutorial/Architecture Guide
Kubernetes is known as container orchestration and we should start at explaining the container part of it.
A Container is what runs the actual application and based on an Image, and are more comparable to something like an LXC Container, Virtuozzo/OpenVZ using the Linux Kernel Namespaces feature. Containers run these images as independent, isolated operating environments under the O........
There aren't too many simple guides that show you how to use commands to setup your USB or other drive as a normal bootable drive where you can easily boot custom kernels or whatever OS you would like.
1. Get the tools we need:
We install "syslinux" for MBR and "syslinux-efi" for EFI and "MBR" as we need a tool that embeds the actual MBR into our USB:
sudo apt install syslinux syslinux-efi mbr........
This is a common issue when e-mailing or uploading video files.
One note is that you should make the filesize you choose below about 20% smaller than you need. For example I took a 219MB video and told it to be 20M. The resulting file was still about 21.9M but it was OK when I said 18M and was barely below the 20M size.
ffmpeg is our friend here, just use this command:
Change the -fs 100Mto the size you want eg. 20M, 500M
Chan........
If you are using the stock 5.4 kernel this is normal but I can confirm it is fixed in newer 5.8 kernels.
To fix it just install the 5.8 kernel and reboot:
sudo apt install linux-headers-5.8.0-64-generic linux-modules-extra-5.8.0-64-generic linux-image-5.8.0-64-generic........
Just a quick note and warning is that if you are testing to see if EFIPXE booting works on a VM, MAKE SURE it actually works. For example Iinitially tested using my Distro's QEMU 2.5+dfsg-5ubuntu10.46 and ovmf BIOS firmware (OVMF supports EFI). However, I found on old versions of QEMU (like 2.5), EFIbooting with GRUB NEVER works so it may appear that you have made a mistake when everything is fine when you boot a physi........
Enable "cli" mode equivalent in JunOS
cli
Configure Mode
configure
So rather than going to the console on a Cisco switch and typing "enable" and then "conf t", the equivalent in JunOS is "cli" and "configure".
How Do You Apply Changes You've Made?
You can make all kinds of changes to the switch, but remember they are not........
If you want to start fresh a lot of people falsely assume that an apt remove and then reinstall or apt --reinstall install package will start you off fresh. To be sure and remove all associated config files do the below with the example of ssh server (don't remove it though if you actually use it!)
The key below is using the --purge flag or apt-get purge proftpd (eg sudo apt --purge remove packagename)
apt purge proftpd; apt install proftpd........
Traditionally kernels were numbered starting from 0 but by default the "new style" of grub boot loading considers each subkernel item to be different so if you have 3 entries for 4.40-148 rather than counting for 1.
To get the expected behavior let's show this example and how we can boot it
We do a grep on menuentry in /boot/grub/grub.cfg to see all of the bootable kernels rather than scrolling through loads of extra entries we don't care about (thou........
One simple flag to configure will create a makefile that statically links all the shared objects and embeds them instead the binary execute. This means as long as you have the same architecture that things should run.
Eg. if you have an old version of Debian with a different version of glibc, then this will solve that problem.
./configure LDFLAGS="-static"
To test that it is really statically linked run ldd:
ldd src/wget........
If you get this error, you were probably compiling some sort of binary or package and got this error. It is normally solved by installing the "gettext"package.
On Debian/Ubuntu just apt-get it:
apt-get install gettext
After that you should be able to configure and make (compile) properly.........
The problem seems to be that whatever kernel and initrd you have is tied to an old version of CentOS 7 that is no longer in the current repos of most mirrors.
If you were previously able to PXEboot and install CentOS and you are sure your network and tftp are good the problem is that you have an outdated kernel and initramfs that point to a defunct version.........
kdenlive is VERY finicky especially if using an older or newer version it can cause crashes, menus not to work, features not to work, things not to work properly.
A good example is that Icould NOT get automask to work, there would be no box to control it until I did this full reset.
One caution is that your backup project files will be erased when doing this:
How to Reset kdenlive entirely
rm ~/.config/kdenlive-layoutsrc
rm........
I have a Canon MF642c and the scanner wouldn't work. I tried to use saned but it didn't work with the BJNPlike it did for some other Canon models.
Introducing sane-airscan with packages for the most common distributions: https://software.opensuse.org/download.html?project=home%3Apzz&package=sane-airscan
http........
It took a lot of fiddling to make a Huion Kamvas 13 Pro work in Linux but it simple once you know what to do. Don't bother searching as it is unlkely there is a guide out there that will actually make your tablet work.
It mainly comes down to the fact that the hid_uclogic kernel module is buggy or doesn't support MANYof these wacom based/Huion tablets properly.
What was happening with me is that Ihad the Kamvas 13 Huion setup as a secondary screen/monitor.&nb........
A very common use case is that you don't want to waste time using a video editor that requires you to open it up and manually import the video clip and audio clip, then manually delete the old audio track and import the video and new audio. That's too much work and time since we don't want to go through the hassle.
ffmpeg is our solution, all we have to do is specify 3 variables and we're done!
-i Windows2019-Server-Noaudio.mp4 is our in........
The idlepc value is very important to dynamips and it is both image and often CPU dependent. There is no "magic"value that will work for all images and all CPUs so this is why I'll show you a quick and handy way.
Also don't be disappointed, some values do not work well but idlepc gives you several. For example in my example below #6 didn't help at all but #7 got me down to about 6% CPU from 99-100%.
*Befo........
This tutorial will get your router up and running using emulation tools. In this case we'll be getting a Cisco C7206 (C7200 series) VXR router going which also supports SCCP VOIP services.
dynamips is the emulator itself and dynagen is the front-end tool that helps us control everything. It is used by tools such as gns3 and eve-ng.
Together the two tools (dynamips and dynagen) allow us to create and emulate REAL router........
This assumes your system is a fresh and normally working install.
What often happens is that many new devices have multiple audio outputs which are generally analog and HDMI/Digital out. Sometimes the OS defaults to the wrong one that you didn't want.
For example if your sound is supposed to play over the HDMI, perhaps the output is set to analog or vice versa.........
Before you try to install and dual boot it is very important to understand the concept of "what boot mode your BIOS is in" and "what mode you booted the installer to".
Then follow the example of Linux Mint (but most Linux installers are very similar)to carefully understand WHERE you are installing your Boot Loader to whether that be MBR or EFI.
How Am IBooted?
First it's important to check your BIOS to see........
Cannot register the hard disk '/some/path/windows-marking.vdi' {f54def00-2252-43f5-9178-0998636cad61} because a hard disk '/other-path/windows-marking.vdi' with UUID {f54def00-2252-43f5-9178-0998636cad61} already exists.
Result Code:
NS_ERROR_INVALID_ARG (0x80070057)
Component:
VirtualBoxWrap
Interface:
IVirtualBox {0169423f-46b4-cde9-91af-1e9d5b6cd945}
Callee RC:
VBOX_E_OBJECT_NOT_FOUND (0x80BB0001)........
It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc..
wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866
tar -zxvf apcupsd-3.14.14.tar.gz
cd apcupsd-3.14.14
[root@somebox apcupsd-3.14.14]#
./conf........
If you've come here, don't be embarraassed, working in IT, this is the MOST common computer problem that almost everyone will encounter. The reason why I'm doing this post is because I've seen an increase from colleagues and admins having this problem and many times it's not even your fault. A common scenario is that someone acquires a new or used computer which they weren't given the password for. Fortunately Ihave a detailed list of all the options whether free or pa........
I was using a small box as a router and one of the ports started going off and coming back at 100M. I truly believe it is simply that it was a case of overheating. Although CPUtemps were only about 67 degrees, the physical box itself was almost burning hot. Isolved the cooling issue and never had the issue again.
Jul 28 15:09:27 swithbox kernel: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Jul 28 15:09:28 swithbox kernel:........
You should only get this if you are using a Pentium II or something really old. The problem here is that newer kernels than 2.6 don't have true i386 support even if you tell it to compile as i386. It will still include features like cmov that break older computers from being able to work.
Generally for very old computers like above, you need to use a 2.6.x kernel and of course make sure it is i386 and all the binaries are as well.
........
This is very frustrating but the fix is usually easy once you read this blog. It's very frustrating when you find that your Linux / Ubuntu laptop's wifi will NEVER work unless it is plugged into the power. The wifi menu may say "Wifi disabled by hardware switch". You may find that your laptop has no switch or has a function wifi button on the keyboard but this does not work or have any effect.
The cause is usual a "wmi" kernel module and simply doing an........
yum -y install gcc make gperf genisoimage flex bison ncurses ncurses-devel pcre-devel augeas-devel augeas readline-devel
checking for cpio... cpio
checking for gperf... no
configure: error: gperf must be installed
configure: error: Package requirements (augeas >= 1.2.0) were not met:
Requested 'augeas >= 1.2.0' but version of augeas is 1.0.0
yum remove augeas augeas-libs augeas-devel
wget http://downl........
apt install software-properties-common
add-apt-repository ppa:deadsnakes/ppa
apt update
apt install python3-pip
apt install python3.7 curl gnupg python3.7-dev git
ln -s /usr/bin/python3.7 /usr/bin/python3
pip3 install numpy keras_preprocessing
curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add -
echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........
This is caused because the user is running as qemu for virt-resize and if qemu does not have privileges to read from the source and write to the destination, it will fail with the below. So either change the uid of qemu or change the ownership of the source and target.
Solution:
export LIBGUESTFS_BACKEND=direct
virt-resize --expand /dev/sda2 /root/kvmtemplates/windows2019-eval-template.img /root/kvmguests/kvmkvmuser4515........
Just run this apt install command
sudo apt install pepperflashplugin-nonfree browser-plugin-freshplayer-pepperflash
After this restart your browser and check Adobe's site to verify if your Pepper flash is working and showing at least version 32.
https://helpx.adobe.com/flash-player.html
As you'll see below it will download the latest version which is currently 32 and this was not possible with the old/crappy deprecated adobe-flash plu........
I used to believe that for Desktops especially that the "ondemand" CPUfrequency changing that kernels included with Ubuntu and Debian based distros have would be sufficient for snappy performance.
However, you can feel the lack of performance on the fastest computer if you have ondemand. A lot of times even under high load 100% of your CPUfrequency in MHz will not be used.
For example a 2.8Ghz CPUmay only run at 1.8MHz or even .9GHz. Now........
yum -y install wget unzip
wget https://download.nextcloud.com/server/releases/nextcloud-18.0.2.zip
unzip nextcloud-18.0.2.zip
yum -y install php php-mysqlnd php-json php-zip php-dom php-xml php-libxml php-mbstring php-gd mysql mysql-server
Last metadata expiration check: 0:58:02 ago on Fri 13 Mar 2020 02:12:49 PM EDT.
Dependencies resolved.
===================================================================........
There are a few caveats that may not be obvious to everyone so I am going to cover them here but keep this in mind before starting.
Before starting install epel or you will be missing tesseract:
yum -y install epel-release
#1) When you specify your SSL certificate with a full path, it really needs to exist where you tell it to (including the default location of /etc/ssl/certs and /etc/ssl/c........
If you've ever gotten errors like this the solution is simple, you need i386 enabled on your 64-bit install because wine depends on some 32-bit x86 libraries:
dpkg --add-architecture i386
apt update
apt install wine
After that it will install just fine.
apt install wine
Reading package lists... Done
Building dependency tree
Reading state information... Done........
This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu!
Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........
The scenario here is that you have some sort of remote headless Linux server but would like to run some programs on them and get graphical access to them. The problem is that the remote server may be an image or VMwithout any virtual GPU and even if so, it is likely without KDE or Gnome, so there's no real way to do this, unless you follow our guide.
Install xvfb
apt install xvfb
Reading package lists... D........
If you are getting this error it is usually caused by having more than 5 keys in your ".ssh" directory. It is a bit of a bug and this is how it manifests itself.
You will find at this point that you are not given any chance to enter a password, or if you are using key based auth that the same thing happens. You'll also find that this is happening with ALLservers you try connecting to.
The solution is to move away key pairs from .ssh so that there ar........
It is unfortunate that LXC's dir mode is completely insecure and allows way too much information from the host to be seen. I wonder if there will eventually be a way to break into the host filesystem or other container's storage?
OpenVZ better security:
[root@ev ~]# cat /proc/mdstat
cat: /proc/mdstat: No such file or directory
/dev/simfs 843G 740G 61G........
Occasionally my whole screen locks up and I cannot even swith to the console and I find this in my syslog:
*-display
description: VGA compatible controller
product: Mullins [Radeon R3 Graphics]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
 ........
MySQL on Debian versions is configured differently than the native local MySQL plugin so you will be disappointed when your password on the mysql client fails by default.
Here is how you reset the MySQL root password the proper and "working way"
#first we gracefully stop mysql
sudo systemctl stop mysql;
#then we forcefully kill any mysqld process just in case
sudo killall -9 mysqld mysqld_safe;........
The reason for doing this is that the installer doesn't seem to work properly for LUKS and the server installer doesn't even support LUKS anymore. When you use the GUI install on Desktop for LUKS it won't boot and will just hang after you enter your password. So the only reliable way is to do it ourselves.
1.) Make a default minimal install of Ubuntu
2.) Have a secondary disk on the server or VM.
3.)........
Yes you have that right, the network service in RHEL8 / CentOS 8 / Rocky Linux / Alma Linux no longer exists. So there is no more systemctl restart network
You can restart NetworkManager but it doesn't have the same effect or ifup/ifdown on all interfaces.
Generally if NetworkManager is installed you will want to restart it or it won't apply the settings from ifcfg.
systemctl restart NetworkManager
To repl........
This is the reason that I don't like the new ADATA USB drives such as the UV128/64GB or 128GB drives and other ones that look to be the same style (the green sliding USB connector).
They just don't work well from new and never work properly at any point.
[ 788.242463] usb 1-1.2: new high-speed USB device number 16 using ehci-pci
[ 788.339816] usb 1-1.2: New USB device found, idVendor=125f, idProduct=db8a
[ 7........
The problem is that by default ssh-keygen loves to generate an easy to crack 2048 bit key (RSA). Supposedly having a larger keysize helps such as 4096 or 8096 but it is thought to be useless still against Quantum computing.
How can I check my existing keysize and type?
ssh-keygen -lf /path/to/your/id_rsa.pub
The output will be something like below followed by the hash. The first number is the key size and the second part will b........
A lot of times this is actually caused by simply not having Firefox installed at all.
selenium.common.exceptions.WebDriverException: Message: Can not connect to the Service geckodriver
https://github.com/mozilla/geckodriver/issues/270........
In this case I am executing using "python3" but what you find in cases like this can be surprising.
The most common issues are that someone has a module for python 2 "pip" and doesn't realize they need "pip3" to install it for python3, but this is not one of those cases.
ModuleNotFoundError: No module named 'bs4'
OKmaybe we didn't install it for python3?
[........
This is not about using ssh as a proxy, but rather, using a proxy when you are SSHing to another host and using ProxyCommand (where we normally use nc as our proxy tool).
In newer versions of nc the syntax has changed to the following:
ssh -o ProxyCommand="nc -x 127.0.0.1:1234" %h %p user@host
The format must be like above in newer nc versions.
Just be sure to change the 1234 to the port of your SOC........
It is fairly simple to use once you know how to use it. However, the tricky thing is that by default it doesn't seem to be active or listen on any interface on manually specified.
How To Install ifplugd
First we install ifplugd
sudo apt install ifplugd
Let's enable it on our desired device(s)
vi /etc/default/ifplugd
set this line as so:........
dd is a very handy tool and there are some more practical things we can do. For example if we want to dump a 3TB drive and want to preserve it and only 200GB are being used on the 3TB we can save a lot of space with gzip.
Backing Stuff up with dd
How to Use dd to backup a raw hard drive and tar gzip at once
Change /dev/sda to the drive you want to backup
Change /mnt/extras........
The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration.
Let's manually play with vdpau to make sure it works before we make it permanent:
First make sure you have libvdpau installed:
sudo apt install vdpau-driver-all
If yo........
The reason we use the command below is because we need the md5sum value hash of the password. This means that we cannot use the md5sum
Change "yournewpass" to the pass you want to set
echo -n "yournewpass" | md5sum
Then you get the md5sum hash of whatever you entered eg. in this case "yournewpass"
5a9351ed00c7d484486c571e7a78c913 ........
I find that the default settings for the radeon driver that is applied to most AMD cards is horrible. For example by default TearFree is not enabled and it causes videos to have some kind of square artifacts.
Here are the settings I have found most suitable for AMD cards:
You need to create file in the following path and restart Xorg or your computer to apply it:
*Beware that making a mistake here will possibly make your computer........
mysql reset root password.
Oops I can't remember my MySQL root password!
[root@centos7test etc]# mysql -u root -p
Enter password:
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)
First we need to stop mariadb:
systemctl stop mariadb
Now we need to restart it with skip-grant-tables whic........
yum -y install mariadb-server
systemctl start mariadb
mysql_secure_installation
Now we need to secure our install and set the MariaDB root password:
The lines you need to act on are marked in bold shown with the answer you need.
mysql_secure_installation
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
SER........
This problem has been around forever, Linux seems to think it is fine to use the r8169 driver for an r8168 NIC but this often causes problems including the link not working at all.
In my case ethttool shows the link up and detected but it simply does not work especially on a laptop that has been resumed from suspension. Sometimes it takes several minutes for it to work or to unplug and replug the ethernet.
Here is the solution:
Install th........
You need to disable vsync like this when running glxgears:
vblank_mode=0 glxgears
For Nvidia drivers do this:
__GL_SYNC_TO_VBLANK=0 glxgears
Notice the higher than 59-60 fps results with vblank_mode=0:
ATTENTION: default value of option vblank_mode overridden by environment.
7919 frames in 5.0 seconds = 1583.704 FPS
8187 frames in 5.0 seconds = 1637.266 FPS........
Downloading and compiling from source to get the latest version of Asterisk is really simple with this guide.
apt install gcc make g++ libedit-dev uuid-dev libjansson-dev apt install libxml2-dev sqlite3 libsqlite3-dev
wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-16-current.tar.gz
tar -zxvf asterisk-16-current.tar.gz
cd asterisk-16.6.2/
./configure
If you get this error change y........
If you are using the default "Image Viewer" aka Xviewer it seems to die on very large resolution files. It seems to understand to scale them but the printer will try to print and then fail.
Using "Pix" viewer seems to fix this and causes these larger files to print just fine.
........
If you can print other PDFs but not a particular one it is very likely that the PDF size is A4 (the longer, skinnier Asian paper size) instead of the North American letter size ( 8.5" x 11"). This breaks printing in most cases. Or it may print if you find a program that ignores the size issue.
Here is an example of an A4 being rejected by a printer in Ubuntu Linux via CUPS
Cannot print PDF CUPS Samsung C460:
Processin........
This is all controlled by /etc/issue
You can basically enter anything in there that you like, but there are preset variables that are mentioned at the end of the page that discuss this.
Some examples of /etc/issue:
Centos 7:
S
Kernel r on an m
Ubuntu 16.04:
Ubuntu 16.04.6 LTS n l
You can also insert any of t........
It is very silly but the default on the ifup-eth script tells dhclient ( the program that obtains a DHCP IPaddress if you have selected DHCPin your ifcfg-eth* config file) to EXIT / QUIT if the first attempt to obtain a lease fails.
No amount of dhclient.conf settings will fix this because if dhclient is started with -1 (which it is by default)then dhclient will quit.
This is obviously very bad for MOST cases. Say for example you have a power outage or........
Create Database:
create database yourdbname;
Show All Databases:
show databases;
Change Database:
use mysql;
Drop / Delete a MySQL Database:
drop database nameofyourdatabase;........
sudo pip3 install python-docx
[sudo] password for :
Downloading/unpacking python-docx
Downloading python-docx-0.8.10.tar.gz (5.5MB): 5.5MB downloaded
Running setup.py (path:/tmp/pip_build_root/python-docx/setup.py) egg_info for package python-docx
no previously-included directories found matching 'docs/.build'
warning: no previously-included files matching '.DS_Store' foun........
Now older versions of qemu-kvm didn't throw this error say if you just had "-video cirrus" when starting qemu-kvm. But newer versions do care.
And this probably only applies to you if you are running from bash/terminal with remote kvm images.
What you need to do is remove the "-video" part and just add -vnc :5
eg. this would fix the error:
qemu-system-x86_64 -enable-kvm -boot order=cd,once=dc -m 1024 -drive........
Having a network bridge allows you to bridge traffic under multiple devices so they can talk natively without using any special routing, iptables/firewall or other trickery.
To create your bridge you need the bridge-utils package for brctl and if you want to do things like bridge VMs that run on a tap device you will need the uml-utilities which provides "tunctl".
1.) Install the utilities to make our bridge
sudo apt-get i........
I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules.
One other weird thing is that sometimes........
python3 testserver.com-car-scraping.py html.txt
Traceback (most recent call last):
File "testserver.com-car-scraping.py", line 5, in
import mysql.connector
ImportError: No module named 'mysql'
For some reason it won't install properly even though I have the mysql client on this machine installed too.
Solution:
You need the mys........
If you've just installed VBox and it is not starting or working, the most common problem is usually that you don't have your kernel source installed, which means there is no kernel driver for vbox so it can't work.
You may get an error that says "Kernel driver not installed" in your Virtualbox.
So the first thing you should do is install your kernel source by running this:
sudo apt-get install linux-headers-`uname -r`........
You'll have to edit the policy.xml file to fix this:
convert -density 300 output.pdf agreement.jpg
convert.im6: not authorized `output.pdf' @ error/constitute.c/ReadImage/454.
convert.im6: no images defined `agreement.jpg' @ error/convert.c/ConvertImageCommand/3044.
sudo vi /etc/ImageMagick*/policy.xml
Change
policy domain="coder" rights="no........
Use these flags:
convert -alpha flatten -alpha remove "output.pdf" ljll.jpg
And even the pesky black backgrounds should be gone after converting to jpg........
This is a security hole in my opinion and should be plugged by editing the lock screen ui layout:
vi /usr/share/mate-screensaver/lock-dialog-default.ui
#find these objects and set the visible property to false
object class="GtkLabel" id="note-tab-label"
object class="GtkLabel" id="auth-username-label>
object class="GtkLabel" id="auth-realname-label"........
SSH helps keep us secure in many ways, one of those is the host-key fingerprint which is unique. If you have been connecting to an SSH server that you've made no changes to and suddenly ssh warns that the key doesn't match then you have a problem.
But how about connecting to an existing server for the first time on a new machine or client?
A lot of new clients calculate it using an SHA256 hash but it is not as easy on your host machine to produce the sam........
ssh-keygen -p -f /path/to/your/id_rsa
Enter new passphrase (empty for no passphrase):
After that your rsa private key will be encrypted which is a layer of protection and security in the event that somehow someone acquires your key and tries to access servers that the key is authorized on.........
Install Errors on Version 12:
This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5
on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error.
*Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install.
What really causes this even though you successfully install........
The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs.
qemu-kvm command:
/usr/libexec/qemu-kvm -version
QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard
........
WARNING: Image format was not specified for '/mnt/space/cucm12.img' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
#you should manually specify the format
q........
The net-tools command brings back all of the oldschool tools that we're used to:
/bin/netstat
/sbin/ifconfig
/sbin/ipmaddr
/sbin/iptunnel
/sbin/mii-tool
/sbin/nameif
/sbin/plipconfig
/sbin/rarp........
Uh oh, so you're working on some super l33t code or other stuff that is super important and Linux Mint's MATE or Cinnamon window manager freezes. This means maybe you can move your mouse but you can't click anything, you can't Alt + Tab to another program but everything appears to be working other than that.
The first thing you would do is Ctrl + Alt + F1 (or whatever virtual terminal you want) and get into the Linux bash prompt (the black screen where things really happen :))........
If you don't aleady have it, you'll need EPEL
Install LXC
yum -y install lxc lxc-templates
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: mirror.it.ubc.ca
* epel: mirrors.kernel.org
* extras: mirror.it.ubc.ca
* updates:........
For some reason, perhaps you don't want to run a daemon or let Letsencrypt have access to your production server.
There is a way to use it like a normal CSR/CA setup in manual mode.
./letsencrypt-auto certonly --manual -d realtechtalk.com - www.realtechtalk.com
Â
Eventually you will get prompted to create a certain path and file with certain data:
Create a file containing just this data:
Casdfasfadsfsad........
In most of the Cisco router IOS I find the ports like ge0/0 ge0/1 and ge0/2 or whatever your ports are down. They will not even give you a link light. So one of the first tasks should be getting the port you are working with up.
In my case the first goal is often connectivity with the LAN and WAN.
LAN = your local area network (eg. in the office/home )
WAN= your ISP/public internet (eg. fiber/cable/dsl/ethernet).........
Enter configuration console:
enable
configure terminal
This is important because if your console doesn't look like below none of the commands will work!
Switch(config)#
Save and Apply Settings
wr
Show Switch Configuration:
show run
Show Port List/Sta........
This works on the 2000 and 3000 series generally.
*The easy way is to just hold the mode button for 10+ seconds.
The full/proper way is below:
1.) Either power on the unit and hold the "mode" button or hold the "mode" button until you see the below:
00:04:08: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram
00:04:08: %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configur........
The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported.
Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........
What you need to do if you have taken a dd or real raw image dump of a hard disk:
VBoxManage convertdd windows2019-eval-template.img windows2019.vdi --format VDI
The .img is the raw dd dump and the .vdi is the output file.
--format VDIspecifies to output to .vdi format
If you are in a pinch you can always use qemu-kvm binary and manually specify the .img as your disk and i........
./certbot-auto --apache certonly
Saving debug log to /var/log/letsencrypt/letsencrypt.log
Plugins selected: Authenticator apache, Installer apache
No names were found in your configuration files. Please enter in your domain
name(s) (comma and/or space separated) (Enter 'c' to cancel): yourdomain.com
Obtaining a new certificate
Performing the following challenges:
http-01 challenge for yourdomain.com
Cleaning........
Whether you are at work, at the coffee shop or on the public internet here are some basic but effective rules for iptables that lock things down (eg. no one can SMB or SSH to you or really anything):
# Generated by iptables-save v1.4.21 on Fri Dec 14 14:00:08 2018
*nat
:PREROUTING ACCEPT [160:19844]
:INPUT ACCEPT [4:357]
:OUTPUT ACCEPT [2955:182236]
:POSTROUTING ACCEPT [2955:182236]
COMMIT
# Completed on Fri Dec 14........
The main use I have for this is virtual servers being able to use an LVM volume but not occupying all of the space. It saves time in deploying machines and copying them so you are only copying the space they are using (eg. 5GB / 60GB vs the full 60GB). There are some disadvantages which is mainly the fact that thin pools by their nature allow you to "overallocate" disk space which is that you could use more space than is available on the disk itself and corrupt your data........
I tried to stop a qemu-img copy or clone and it broke everything. It was fine to "stop" it from the GUI but a process still persisted so I killed the relevant qemu-img and the kernel went crazy. It also may not have helped that I tried to lvremove a different volume (an unused disk). But either way it breaks LVM (you cannot even run lvdisplay) so a reboot is necessary.
Jan 17 06:45:21 testserver kernel: [ 5680.439337] systemd-udevd D 0&nbs........
1.) Create Image using qemu-img
qemu-img create -f qcow2 skype.img 40G
2.) Start VM using flags
-m = memory in MB
-drive file=yourimagefile.img
-cdrom /path/to/the.iso
qemu-system-x86_64 -m 4096 -drive file=skype.img -cdrom ~/Downloads/SfB-E-9319.0-enUS.ISO
Enable Bridged Networking........
Just find the relevant file in /etc/NetworkManager/system-connections
sudo vi /etc/NetworkManager/system-connections/Wired connection 1
[802-3-ethernet]
duplex=full
mac-address=00:00:00:FE:FE:FE
[connection]
id=Wired connection 1
type=802-3-ethernet
timestamp=1532403341
[ipv6]
method=ignore
[ipv4]
method=manual........
growisofs -Z /dev/sr0 critical.tar.gz.gpg
Executing 'genisoimage critical.tar.gz.gpg | builtin_dd of=/dev/sr0 obs=32k seek=0'
I: -input-charset not specified, using utf-8 (detected in locale settings)
File critical.tar.gz.gpg is larger than 4GiB-1.
-allow-limited-size was not specified. There is no way do represent this file size. Aborting.
:-( write failed: Input/output error
#remember to us........
In a RAID array I had a have periodically lost a drive here and there over the past several months. Iwas always able to readd and resync without losing data. However at some point it looks like some minor corruption happened and this makes DRBD unhappy.
Using fsck did not help either.
Dec 19 06:01:45 storageboxtest4 kernel: [19005.945890] EXT3-fs error (device drbd0): ext3_get_inode_loc: unable to read inode block - inode=22184379........
mdadm --manage /dev/md125 -a /dev/sdb4
mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument
Dec 19 01:23:48 storageboxtest kernel: [ 2328.854491] md: sdb4 does not have a valid v1.2 superblock, not importing!
Dec 19 01:23:48 storageboxtest kernel: [ 2328.854499] md: md_import_device returned -22
#zero the superblock and try again!
mdadm --zero-superblock /dev/sdb4
mdadm --ma........
Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated.
It has caused a kernel panic and system crash repeatedly as we can see from the logs.
But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector.
Any time I have had anything but 0 for that attribute it........
#to show all
VBoxManage list vms
#show ONLY running vms
VBoxManage list runningvms
VBoxManage storageattach test --storagectl "SATA" --port 0 --device 0 --type hdd --medium iscsi --server 192.168.1.91 --target "iqn.2018-12.local.abcrandom.target:sdb" --initiator "iqn.1982-01.ca.bla.tld:abc123" --t........
initiator = client
target = server
These are the first concepts you should understand which is that in iscsi essentially the "initiator" is the client and the "target" is the server.
iSCSI is derived from the old fashioned SCSI that us oldtimers grew to love. The "i" stands for Internet and the SCSI stands for "Small Computers Systems Interface" (SCSI).
iSCSI Target (Server)Setup
targetcli is the pac........
< a href="/Products/MX72244">
< span class="c-shca-icon-item__body-name-brand">
ADATA
< / span>
&nbs........
Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments.
Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........
systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system.
The key commands or arguments you will use with systemctl are the following:
Unit Commands:
list-units [PATTERN...] List loaded units
&nbs........
Getting an error about gi missing when running a .py python script?
Just install EPEL and install the python3-gobject package:
yum install python34-gobject........
You can do other things but this particular script is just to set all AMD cards to 80% fan speed (remember this script needs to applied everytime you reboot). You could set it is a cron or just throw it into /etc/rc.local
basepath=/sys/class/drm
for hwmon in `ls -1 /sys/class/drm|grep card[0-99]$`; do
echo card=$hwmon;
hwmonname=`ls $basepath/$hwmon/device/hwmon|grep hwmon[0-99]`
hwmonpath=$basepath/$hwmon/device/hwmon/$hwmonname
echo "ec........
You'll have to violate the iso9660 standards but it is necessary if you want to preserve your filesystem and filenames and shouldn't be an issue as long as you are using a modern OS like Linux.
genisoimage -o Backup-Myfiles.iso -r -J -joliet-long /some/path/
You will get errors like below (even enabling joliet-long didn't help)
genisoimage: Error: /some/filename.pdf have the same Joliet name
Joliet tree sort failed. The -joliet-lo........
4.374647] usb_common: exports duplicate symbol usb_get_dr_mode (owned by kernel)
[ 4.403334] usbcore: exports duplicate symbol __usb_get_extra_descriptor (owned by kernel)
[ 4.427736] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 4.427844] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 4.429040] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
[ 4.429141] xhci_hcd 0000:00:15.0: cache line size of 64 is not sup........
#Linux Mint 18.2 how to install gajim .16.9 so you can use OMEMO encryption:
sudo apt-get install python-axolotl python-nbxmpp
wget https://gajim.org/downloads/0.16/gajim-0.16.9.tar.gz
tar -zxvf gajim-0.16.9.tar.gz
cd gajim-0.16.9
./autogen.sh ;make;sudo make install
#if you get this error you need to get a newer python-nbxmpp from here:
gajim
Gajim needs python-nbxmpp >= 0.6.1 to run. Quiting...........
wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe
--2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe
Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85
Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1525561 (1.5........
sudo apt-get install hwloc-nox
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
hwloc-nox
0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded.
Need to get 151 kB of archives.
After this operation, 453 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubunt........
Proxmox at the root of your storage creates and "images"and "templates/iso" folder for VM images and iso's respectively. It ignores files in any other location.........
Error 0 occurred while receiving the document
root@vh1:/var/tmp# wget http://mirror.compevo.com/proxmox/proxmox-ve_5.2-1.iso
--2018-08-30 16:27:37-- http://mirror.compevo.com/proxmox/proxmox-ve_5.2-1.iso
Resolving mirror.compevo.com (mirror.compevo.com)... 103.25.61.44
Connecting to mirror.compevo.com (mirror.compevo.com)|103.25.61.44|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 641517568 (612M) [application/o........
zenity is a nice utility as part of the gnome window manager that allows you to script from bash and retrieve the input from the user. It could also be helpful in just notifying a user when they login with a popup window.
I'll give an overview of what's available with zenity:
Application Options:
--calendar Display calendar dialog
--entry Display tex........
You can find many ways to specify the VLANin your network configuration but Ifind this is the simplest and quickest.
In this case we are talking about a bridged adapter "vmbr0" but it works even if you just had a normal non-bridged interface.
The key here is that in vmbr0 you'll notice there is no IP address. We just specify "manual".
Below it is a similar stanza for "vmbr0.58" in this case 58 represents the VLAN (change........
Error reading from database
More information about this error
It is usually not possible to recover from errors triggered during installation, you may need to create a new database or use a different database prefix if you want to retry the installation.
Solution:
This happened when I was running MySQL 5.1. Assuming your database details are right and the DB is up then make sure you are usin........
Almost always the reason will be that the php.so file is missing but also that php.conf is misconfigured.
In the problem machine it is actually PHP7 installed so if you reference PHP5 of course things wil be broken!
Take for example here:
cat /etc/httpd/conf.d/php.conf
#
# PHP is an HTML-embedded scripting language which attempts to make it
# easy for developers to write dynamica........
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0
Solution:
Edit geoip.ini
vi /etc/php.d/geoip.ini
Comment out the .so like so:
;extension=geoip.so
service httpd restart........
[root@localhost:~]
BootModuleConfig.sh echo host-ind nfcd........
yes it does create its own json
============================================
cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json
2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1
--> ........
The solution is just to install libmicrohttpd-dev
./xmr-stak
./xmr-stak: error while loading shared libraries: libmicrohttpd.so.10: cannot open shared object file: No such file or directory
libmicrohttpd
libmicrohttpd10 - library embedding HTTP server functionality
libmicrohttpd-dbg - library embedding HTTP server functionality (debug)
libmicrohttpd-dev - library embedding HTTP server functionality (development)
$ sudo apt-get i........
The Correct Way To Resize In Place
qemu-img resize kvmuserwindows2008dcetest.img +1G
Image resized.
Below is a common mistake that some users make they are trying to specify a new image name but it can be resized in place (just make sure the VMis NOT running and you've backed up the data in case something goes wrong).
qemu-img resize kvmuser453111.img kvmuser453111-larger.img +5G
New i........
sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3
sudo apt-get install libcurl4-gnutls-dev
git clone https://github.com/wolf9466/cpuminer-multi
sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev
git clone https://github.com/fireice-uk/xmr-stak-cpu.git
make install
cd bin
chmod +x xmr-stak-cpu
./xmr-stak -O xmr........
convert "file.TIF" "resize.jpg"
convert.im6: Unknown field with tag 317 (0x13d) encountered. `TIFFReadDirectory' @ warning/tiff.c/TIFFWarnings/788.
I've been getting this error in ImageMagick on some .tif files even though it seems to actually convert properly.........
[root@thetor2017 conf]# service httpd restart
Stopping httpd: [ OK ]
Starting httpd: WARNING: MaxClients of 3000 exceeds ServerLimit value of 300 servers,
lowering MaxClients to 300. To increase........
Server Side Config
1.) First install nfs-utils
yum -y install nfs-utils
2.) Configure nfs share
Create a directory for your NFS share
mkdir /datastore
Create your NFS share in /etc/exports
echo "/datastore 10.220.101.0/24(rw,sync,no_root_squash)" >> /etc/exports
systemctl restart nfs........
dvd+rw-mediainfo /dev/sr0
INQUIRY: [ASUS ][BW-16D1HT ][3.00]
GET [CURRENT] CONFIGURATION:
Mounted Media: 11h, DVD-R Sequential
Media ID: RITEKF1&n........
Ialready have the caja-image-converter option installed but it shows nothing.
Weirdly enough if you install nemo and nautilus converter it does show and work inside caja:
The solution is to install *-image-converter
sudo apt-get install *-image-converter
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'n........
A very handy feature of ImageMagick's convert command is that it can convert PDF's to other image formats like jpg but did you know you can even manually select a range or specific pages from the PDF?
Here is an example of converting a range of pages from a PDF in this case pages 25 to 36:
convert -density 300 "vSphere 6.5-1.pdf[25-36]" vsphere.jpg
Here is an example of converti........
You can search for this bug and it seems like it may be related to ecryptfs and is many years old.
The symptoms are that you return to the computer and the screensaver was active or the screen was asleep/black and it doesn't seem to come back. But you check by SSH the computer is running fine and are frustrated you'll lose your running programs and have to reboot.
There is a simple solution:
Ctrl + Alt + F1
Ctrl +Alt + F8
Ba........
I've read a few guides about this but they didn't work for me.
sudo apt-get install bridge-utils
#don't think the above is enough it won't work still even though you have by default an /etc/qemu-ifup that handles it if you have the right tools and setup
sudo qemu-system-x86_64 -net tap -net nic -enable-kvm -cpu host,vmx=on ~/VirtualBox VMs/vsphere-vcenter/vsphere-vcenter.vdi
W: /etc/qemu-ifup: no bridge for guest interface foun........
InternalServerError (com.vmware.vapi.std.errors.internal_server_error) => {
messages = [LocalizableMessage (com.vmware.vapi.std.localizable_message) => {
id = vapi.bindings.method.impl.unexpected,
defaultMessage = Provider method implementation threw unexpected exception: com.vmware.vapi.std.errors.InternalServerError,
args = [com.vmware.vapi.std.errors.InternalServerError]
}],
data =
}
I was getting the........
nfs mount failed:
mount 10.10.2.20:/tmp/nfsmount /mnt/nfs/
mount: wrong fs type, bad option, bad superblock on 10.10.2.20:/tmp/nfsmount,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
need a /sbin/mount. helper program)
 ........
#mount the VCSA DVD
mount /dev/sr0 /mnt/cd
#alternatively you could mount the iso directly
mount -o loop vcsa.iso /your/mount/path
#for this purpose we are using the CLI installer on Linux
cd /mnt/cd/vcsa-cli-installer/lin64
#no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file
./vcsa-deploy
Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
The main issue is it looks like Java is not configured to accept the invalid ssl cert that is coming from the download location.
Exception in thread "main" java.lang.RuntimeException: javax.net.ssl.SSLException: java.security.ProviderException: java.security.InvalidKeyException: EC parameters error
export ANDROID_HOME=/home/user/Downloads/tools/
Conversations-master$ ./gradlew
Downloading https://services.gradle.org/distributions/grad........
This is most likely to happen on a normal GUI system like Ubuntu or Linux Mint. If you or the user is meant to have sudo / root privileges it is as simple as editing the following files:
Now assume your username is "iamtheuser"
vi /etc/group
adm:x:4:syslog,iamtheuser
sudo:x:27:anotheruser,iamtheuser
Find the above lines and add a comma and "ia........
This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help.
Here is the short end of the stick that fixed it:
sudo apt-get install mdm mate-desktop-environment
Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........
This usually happens when you are using something like an INT and try to insert a larger valuethan the maximum which is larger than "2147483647"
On a practical term I have seen this and been guilty of this error when using scripts like PHPand generating large random numbers:
$hash = mt_rand(5,9999999999999);
Obviously that many 9's are more digits than the maximum of an INT resulting in that error. Change your code accord........
Here is the only solution Ifound that works in Firefox:
*Note you could basically just copy all of the commands in bold (the rest just shows the output)
Install sqlite3
sqlite3 places.sqlite
sqlite> .clone places.sqlite-fixed
moz_places... done
moz_historyvisits... done
moz_inputhistory..........
It looks like this has something to do with APIC but I am not sure. I have similar CPUs with a different MB and BIOS that work fine on the same type of kernel. A lot of time the issue is because of the C-step setting in the BIOS.
The same thing happened on the 2.6 kernel with Centos 6 but this is a homebrew 4.4 kernel soI am not sure why it is happening when even Centos 7 (3.2) kernel works OK.
Solution - It comes down to the BIOS set........
In xplayer Iget the following error "Could not initialize supporting library.". It actually looks more like a gstreamer issue.
For those wondering what the default video player is called it is "xvid" and not "totem" anymore like previous versions.
Basically it looks like some codecs are missing when I uninstalled another program it uninstalled other programs and codecs that it shouldn't have.
I've tried installing all the gstre........
wget -qO
You just need the -qO switch and you'll be good to go, the output then goes to your console/screen/script rather than a file.........
This is useful if you have a bunch of images/scans where the same area at the top needs to be chopped.
Sometimes the -trim option (such as the case of white space on top)is wrong and ends up cropping the image and losing some text.
ImageMagick's convert is very useful but tricky to find some things out as I find it to be less than intuitive sometimes.
Chopping off the bottom
convert -crop -0-400 image.jpg image.pdf........
In your browser go to "about:config"
Right click and choose "New" ->"String"
The name should be:
general.useragent.override
String Value:
Mozilla/5.0 (Linux; U; Android 2.2.1; en-ca; LG-P505R Build/FRG83) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1
You don't even have to restart to make this work.........
This is one thing that has me wondering about SMF. It is apparently a known issue but in the latest version and new install nothing looked right because it was using http://127.0.0.1 to find everything! How on earth would it ever do this or think it is normal?
Excerpt of crazy html code it produces that causes the issue:
........
GRANT SELECT, LOCK TABLES ON *.* TO yourmysqluser@localhost;
All you need to do a full MySQL dump on all databases is the SELECT and LOCK TABLES privileges. This way you don't have to use the mysql root user. Data could be compromised this way but at least no harm from manipulation, changes or deletion are possible by locking down the privileges to the minimum for a full MySQL dump and backup.........
So I have a domain "testdomain.com".
Inside test domain.com's root is the following .htaccess:
Options +FollowSymLinks -Indexes
ErrorDocument 403 /launch/index.html
Order Deny,Allow
Deny From All
Allow From 192.168.1.2
When you visit anything other than root things work fine. Eg. if you visit http://testdomain.com/somedirfile.html
It will show the right error in /launch/........
It has been a big pain for a long-time to install Windows from a Linux environment. I used to run a windows install server and it never worked right for some reason (the install would fail on most servers).
Before getting start be sure to setup your samba share so once you boot into WinPE you can mount the install for whatever Windows you want
/etc/samba/smb.conf
[smbwinstall]
path = /tftpboot/images/winstall
guest ok = yes........
Normally when I've seen this it's when you are using a variable like a normal string when in fact it's actually an array such as this example:
[Tue Mar 13 04:22:35 2018] [error] PHP Catchable fatal error: Object of class WP_Term could not be converted to string in /vhost/httpdocs/wp-content/plugins/wp-instagram-post/classes/class-woo-igp.php on line 578
&nbs........
I modified this code after quickly learning how Wordpress plugins actually work, how they're called etc.. was the first trick to modifying the code to add tags.
Add this code after line 570 in wp-content/plugins/wp-instagram-post/classes/class-woo-igp.php
&nb........
Centos 6 requires GLIBC 2.12 however a lot of new programs you would want to compile may need a newer glibc. You can't remove the old glibc since the whole OS is based on it but you can install the updated glibc alongside it and do an export pointing to your updated GLIBC.
mkdir ~/glibc_install; cd ~/glibc_install
wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz........
MySQL will silently truncate a larger INT than capable.
Check MySQL's own documentation here:
As we can see the maximum size of INT (which is the most commonly used) is 2147483647
A lot of coders make this mistake by using very large values such as 9999999999 but it would actually truncate to 2147483647 which is the maximum size of an INT. This is dangerous beca........
The commands below will help you reset any mysql user password.
use mysql;
update user set password=PASSWORD('thenewpass') where User='theusername';
flush privileges;
The first line says to use the "mysql" database which contains all the user info.
the second update line sets the new password "thenewpass" for the u........
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0
Remove the GEOIP from PHP:
php71w-pecl-geoip-1.1.1-1.w6.x86_64
PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the........
This just simply outputs what you need a username and password that can be used to authenticate from .htaccess
htpasswd -nb user password
user:Gnb6uE9Lp4gt2
If you want to write it straight to a file
htpasswd -cb /tmp/somefile.pw user password
How To Use This In .htaccess
AuthUserFile /tmp/somefile.pw
AuthName GetLost!!
AuthType B........
yum -y install samba
vi /etc/samba/smb.conf
https://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-6.03.zip
mkdir syslinux;cd syslinux;unzip syslinux-6.03.zip
mkdir -p /tftpboot/libs/
cp bios/com32/modules/linux.c32 /tftpboot/libs/
cp bios/com32/libutil/libutil.c32 /tftpboot/libs/
cp bios/com32/lib/libcom32.c32 /tftpboot/libs/
#add lib path
echo "PATH libs" >> /tftpboot/pxeli........
This works with lspci and if it's outdated may not give you the exact manufacturer and device model.
For example take these 3 different RX 580's:
1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
1b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
1d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
You ca........
edit theme css:
Click "Appearance -> Editor -> Stylesheet"
http://yourblog.com/wp-admin/theme-editor.php?file=style.css&theme=twentysixteen
textarea {
color: #1a1a1a;
/*font-family: Merriweather, Georgia, serif;*/
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif........
guestmount -a kvmuserscra.img -m /dev/sda1 mount
libguestfs: error: mount_options: /dev/sda1 on / (options: ''): mount: unknown filesystem type 'ntfs'
guestmount: '/dev/sda1' could not be mounted.
guestmount: Did you mean to mount one of these filesystems?
guestmount: /dev/sda1 (ntfs)
guestmount: /dev/sda2 (ntfs)
yum -y install ntfs-3g
still........
This is not just a Linux issue but a general issue most software or hardware players cannot play the resulting exported/backed up format of .h264 from DVR security camera footage for some silly reason.
There is a simple solution in Linux using ffmpeg fortunately.
Convert the .h264 file into mp4
ffmpeg -i yourfile.h264 -codec copy video.mp4
play dvr .h264 file........
add this style="background-size: contain;max-width: 100%; height: auto;" to your img code.
Example: ........
This is important as unfortunately Centos may designate a package obsolete and the replacement breaks everything (eg. you have a config file and the new replacement is not at all compatible with it and it breaks your application).
This is where disabling obsoletes comes into play, it can be done from yum but it doesn't work at the time I find.
yum --setopt=obsoletes=0 install someapp However Ifind it still installs the new app and not the one you ask for........
ob_start();
include "yourfile.php";
$stored_value=ob_get_clean();........
Upgrading from PHP 5.3 to 5.4+ there are many challenges basic things like mysql_connect() do not work anymore.........
You are using Centos 5 which is deprecated so nothing in yum will work until you follow this post to use the vault:
http://realtechtalk.com/Centos_59_Working_Vault_Repo_file-1921-articles
yum update
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* epel: fedora-archive.ip-connect.vn.ua
Traceback........
mysqldump or mysql query of a larger file/table
ERROR 2006 (HY000) at line 567: MySQL server has gone away
Add this to /etc/my.cnf
max_allowed_packet=64M
service mysqld restart........
Sep 12 18:16:25 vps pluto[7299]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 192.5.6.2 port 20640, complainant 192.5.6.2: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)]
Some say changing the "leftprotoport=17/%any" will fix this but I have not found this to be the case.
Essentially it means at least one end is blocking the ipsec packets. Sometimes the %any allows an alt........
Centos 5 is not supported running yum will produce an error like this:
YumRepo Error: All mirror URLs are not using ftp, http[s] or file.
Eg. Invalid release/
removing mirrorlist with no valid mirrors: /var/cache/yum/base/mirrorlist.txt
Error: Cannot find a valid baseurl for repo: base
Solution - Update this file CentOS-Base.repo
# CentOS-Base.repo........
First of all check to see which version if any you have available for a downgrade:
apt-cache showpkg packagename
Downgrade/Install old package:
apt-get install package=version
Example
apt-cache showpkg caja
Package: caja
Versions:
1.10.3-1+rafaela (/var/lib/apt/lists/packages.linuxmint.com_dists_rafaela_import_binary-amd64_Packages) (/var/........
In Debian/Ubuntu this is called "holding".
To hold/exclude a package from being installed or upgraded:
sudo apt-mark hold packagename
To allow the upgrade/installation unhold:
sudo apt-mark unhold packagename........
Intel NUC J3455 vs Vorke V1 J3160
Both are excellent units but the J3160 is nicer if you require even lower power usage (6W vs the Intel 10W). The price is attractive on the Vorke V1 as well. It's been said that the Intel J3455 NUC has a buggy BIOS and some other issues that require attention.
The Intel J3455 is still nice because it has 2 RAMslots but it does get hotter due to lack of fan.
The Vorke V1 runs cooler, uses less power an........
This is an important feature a failed read can genuinely occur if a temporary file has been removed or if you try backing up a sysetm file in /proc /sys (which you shouldn't really anyway).
The way to fix this is the following switch:
--ignore-failed-read
Example:
sudo tar --ignore-failed-read -czvf mycomputer-backup.tar.gz --exclude=/home/otheruser/* --exclude=/proc/* --e........
When using the .sh script the rendering doesn't work after an upgrade of related packages to kdenlive.
kdenlive (kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1)) with affine or composite transitions was fine but is now broken during the time of transition it is just a white screen.
The previous version was fine:
kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1
But now I can't find it or install it:........
If you were in my boat you were frustrated that you had to double encode, eg. one separate encode for watermark and a separate from concat and it's not easy to figure out this with ffmpeg on your own. However it is a nice way to save time!
ffmpeg -i file1.mp4 -i file2.mp4 -i file3.mp4 -i watermark.png -filter_complex "[0:v]setpts=PTS-STARTPTS[v0]; [1:v]setpts=PTS-STARTPTS[v1]; [2:v]setpts=PTS-STARTPTS[v2]; [v0][0:a][v1][1:a][v2][2:a]concat=n=3:v=1:a=1[v][aout]; [v][3:........
cagecoin linux compile:
sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev
libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev
libssl-dev libdb++-dev libminiupnpc-dev
Solution:
sed -i s/"BOOST_LIB_SUFFIX=-mt-s"/"#BOOST_LIB_SU........
Solution:
Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt
sudo aptitude install wine
The following NEW packages will be installed:
ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6
wine1.6-amd64{a} wine1.6-i386:i386{a}
The following packages will be REMOVED:........
When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right.
Solution for me:
My example uses 3 videos in total so "n=3" and a=1 to include audio.
ffmpeg -threads 12 -i file1.mp4 -........
I believe from what I've read that this card's driver doesn't support the features after trying all known troubleshooting methods.
ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload -c:v hevc_nvenc -profile main -preset slow -rc vbr_hq -c:a copy uservideoRendered.mp4-test
ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload........
Essentially a program I was running for mining did not terminate properly with Ctrl+C it is listed as defunct and cannot be killed, kernel is tainted and normal tricks to disable the port are impossible the dev and sys entries for the device cannot be browsed or interacted with in any form without a lockup of the request. The only solution is to reboot due to the kernel taint as far as I can find so far.
[1130246.811056] INFO: task minerd:21861 blocked for more th........
#if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used
wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2
tar -jxvf ffmpeg-3.3.2.tar.bz2
cd ffmpeg-3.3.2/
./configure --disable-yasm
install prefix /usr/local
source path ........
user@box:~$ sudo tune2fs -l /dev/md99
[sudo] password for user:
tune2fs 1.42.9 (4-Feb-2014)
Filesystem volume name:
Last mounted on: /mnt/md50
Filesystem UUID: 976a8655-2619-4587-878c-dab07f7b7652
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Fi........
This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether.
Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........
I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us
yum install automake curl openssl-devel libcurl-devel gcc gcc-c++
yum -y install kernel-devel-`uname -r`
yum -y install unzip
#the........
This is a VIA made VL805 USB 3.0 Chipset with 4-ports and MOLEX powered. First of all this unit was cheap at about only 9 USD with fast shipping. My biggest concern was if this was a quality unit and would it really give you full USB 3.0 speeds (some people reported with similar cards that for some weird r........
This is a common issue, what if a issue shouldn't have root but you want to use that user to make a full backup of a system? They of course need root access.
You can actually just give them passwordless sudo access to rsync in /etc/sudoers:
sudo vi /etc/sudoers
yourusername ALL = NOPASSWD: /usr/bin/rsync
Here is how you would execute rsync:
The key thing for the remote host is to........
Why won't my Linux Mint boot after I manually installed a new kernel?
eg.
apt-get install linux-image-newerone
Do this
dpkg -l|grep linux-image|grep extra
ii linux-image-extra-3.16.0-38-generic 3.16.0-38.52~14.04.1&nb........
When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help).
At first cudaminer will give you these errors:
stratrum_recv_line failed
...retry after 15 seconds
GPU #0: Geforce 210 with compute ca........
**** Warning: can't process font stream, loading font by the name.
Can't find CMap Identity-UTF16-H building a CIDDecoding resource.
Warning: falling back to Identity ordering
**** Error reading a content stream. The page may be incomplete.
**** File did not complete the page properly and may be damaged.
**** This file had errors that were repaired or ignored.
****........
php read file into variable
$content = file_get_contents(home.html);
Otherwise if you want to get the source code of the PHP file, it's the same as a .txt file:
$content = file_get_contents('/path/to/phpfile.php');
You can also get from URLs:
$content = file_get_contents('http://someurl.com/file.txt');........
Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues.
Take for example the error messages from Linux Mint:
[804829.895414] usb 1-1: USB disconnect, device number 11
[806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........
Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user:
Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4
Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........
I was sure this was a Centos bug with OpenSSL, Apache, MySQL or even PHP. I tried everything but nothing helped. One clue is that if you check the Apache logs you will see nothing in the access logs until minutes later (this means Firefox has not even passed your request to the remote Apache/htttpd server).
When even accepting the invalid certificate message that would show up minutes later when trying to "View the Certificate" Firefox would freeze. This bu........
These errors believe it or not are simply because of not being the root user or running with sudo! However if you didn't know to try as root you'd think there was a problem with your burner or disc Essentially it looks like without root you cannot send the required scsi commands to continue writing. Ithink cdrecord should have built-in tests or safeguards to see if it has the permissions to run the required commands.
I guess for more advanced users the idea is simila........
*Update so this doesn't work it must be something to do with the path of nfs or something else but the installer fails with "Installer crashed" at the end whereas with the CD/USB it works.
This assumes you've already installed and configured a separate PXE/DHCP server somewhere else and your /tftpboot directory is setup.
This is for Linux Mint 18.1 but generally applies to most versions although you may have tro change things like "casper"........
Just make sure you have php-xdebug installed and edit your php.ini:
[xdebug]
xdebug.profiler_enable = 0
xdebug.profiler_enable_trigger = 1
xdebug.profiler_output_dir = "/tmp/xdebug/"
xdebug.output_name = "cachegrind.out.%t-%s"
Also make and set permissions on /tmp/xdebug:
mkdir /tmp/xdebug
chmod 777 /tmp/xdeb........
Does this mean? [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
Basically it means you created your SSL Certificate as a CA the wrong way, usually with this command:
openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key
How can you fix it and do it properly?
Step 1.) Make a new Private KeyCreate server pass key:........
It's very simple you just use the "-c" switch and wget will resume the file (make sure you are in the same directory) or specify -O /path/to/partialdownload.zip
wget -c http://someurl/file.zip........
1.) gedit/pluma
both very good the only thing I wish is that there was an autosave for unsaved documents! The only other competitor which is similar but I prefer less is kwrite (although I think kwrite may have proper autosave)
pluma seems to be a renamed gedit yet gedit is still installable on Linux Mint)
........
Normally the below would indicate a failing or failed drive. In this case the SATA port was unplugged and sometimes the Linux kernel/motherboard even with AHCIjust don't play nice and can't handle it.
What happened is Iplugged in a new drive after removing another one. However the log shows that after the old drive was plugged in the Linux kernel kept complaining thinking the drive was there but not responding properly. This continued even with reseating........
Based on this tutorial: http://www.linuxjournal.com/content/overlay-images-video-using-mplayer-and-mencoder
mencoder -oac pcm -ovc raw -vf bmovl=0:0:tfifo -o $output $file
vf_bmovl: Unknown command: ''. Ignoring. ........
This is very annoying that ffmpeg is missing from Linux Mint! They have ffmpeg2theora which is a totally different codec and does not work as ffmpeg does at all (it is basically totally different).
However on Linux Mint 17 I was able to use a Ubuntu PPA and sucessfully install ffmpeg!
https://launchpad.net/~mc3man/+archive/ubuntu/trusty-media
Adding this PPA to your system........
Using Apache 2.2 and PHP5.6 PHPBB3 is very slow to respond. Actually for some reason it takes so long to even register a log entry in access_log as in several seconds or a few minutes later it shows up in Apache. All other vhosts and Apache access stops working and freezes until the request to access PHPBB3 slowly completes.
It seems to randomly be slow if you stop using it whether for posting or reading the forums. I've migrated to different machines including........
A lot of times these files seem to lag and be incredibly slow even if just a few dozens rows of data.
Here is how you can convert it with "gnumeric":
ssconvert file.xlsx file.csv
You may get lots of weird errors like this but the conversion seems to work fine:
(ssconvert:15244): GLib-GObject-WARNING **: g_object_set_valist: object class 'SheetObjectImage' has no property named 'style'........
This command will generate a random password using all letters and numbers that is 20 characters wrong based on /dev/urandom (for the most truly random output).
echo `< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-20};echo;`........
This is especially helpful if you run your own servers. If you are presented with an error message or warning that the signature has changed or does not match the IP/domain you are connecting to you always want to verify manually.
So your e-mail/web client will show you an SHA-1 fingerprint like this:
"Could not verify this certificate because the issuer is unkown" or other reasons such as a mismatch in IP/domain.
It will also show you........
Ijust use "ufraw" and it does the trick perfectly. Now Iwish I could figure out how to batch convert them into .jpg with ImageMagick (it seems support for .raw is not guaranteed or it has to be compiled in).
apt-get install ufraw........
In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below.
mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore.
[45817.162728] ata4: exception........
1.) Replicate the number of partitions in your new drives.
gdisk /dev/sda
gdisk /dev/sdb
I created 3 partitions of the same same size.
partition #1: +1G (/boot)
partition #2: +60G (swap)
partition #3: rest of it (/)
#note if you are using GPT/gdisk you need to create separate a partition at least 1MB in size (in my case I would a 4th partition and mark it type ef02).........
Solution:
yum -y install --skip-broken package-you-want-to-install
Packages skipped because of dependency problems:
php56w-mysql-5.6.30-1.w6.x86_64 from webtatic
Error: Multilib version problems found. This often means that the root
cause is something else and multilib version checking is just
pointing out that there is........
In short the solution is just to use vgremove for the actual /dev/mapper device:
vgremove /dev/mapper/backups-backuplv
box mnt # mdadm --manage /dev/md8 --stop
mdadm: Cannot get exclusive access to /dev/md8:Perhaps a running process, mounted filesystem or active volume group?
box mnt # lv
lvchange lvconvert lvcreate l........
A friend has this issue where you try to go to contacts and you get a message saying you need to enable data (basically if you are not really on the AT&T network).
The Solution - You can disable this by the following code in the dialer:
*#*#2666#*#*........
This was a surprising bug but I unplugged all drives for an array md127. At first it was just 1 drive and mdadm seemed to notice this. I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it. This created problems trying to unmount it or even to stop this array with mdadm freezing.
As for how to fix it I can only think of making sure you are not in a mounted path of........
convert -trim yourimage.png
That's all there is to it, very simple, clean and quick!........
Uh oh
[17925926.174277] block drbd0: Handshake successful: Agreed network protocol version 96
[17925926.174325] block drbd0: conn( WFConnection -> WFReportParams )
[17925926.174342] block drbd0: Starting asender thread (from drbd0_receiver [1682])
[17925926.174432] block drbd0: data-integrity-alg:
[17925926.174581] block drbd0: drbd_sync_handshake:
[17925926.174586] block drbd0: self 2AAE66AF9252D6DB:2815BF........
The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files.
UPDATE user SET password=password("newpass") WHERE user='root';
flush privileges;
ERROR 2013 (HY000): Lost connection to MySQL server durin........
PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the chosen SHM segment size is higher than the operation system allows. Linux has usually a default limit of 32MB per segment. in Unknown on line 0
PHP Fatal error: PHP Startup: apc_shm_attach: shmat failed: in Unknown on line 0
This error is not at all fun because it actually prevents Apache/httpd from starting or working at all. It will........
service named status
rndc: connect failed: 127.0.0.1#953: connection refused
named (pid 10557) is running...
This issue is normally caused by a permissions issue where named doesn't have the permissions to read the rndc.key.
Check /var/log/messages:
Jan 4 17:06:22 storagebox named[10753]: none:0: open: /etc/rndc.key: permission denied
Jan 4 17:06:22 storagebox named[10........
Change Host="192.168.5.99" with the remote IP allowed(this is of course more secure but also cumbersome if your IP changes). You could also have a single layer of protection that specifies the IP via firewall or both (of course both are far mor secure).
UPDATE user SET Host="192.168.5.99" where Host="localhost"
or for any/wildcard
UPDATE user SET Host="%" where Host="localhost&qu........
I created a new partition table on a newly plugged in device and it caused fdisk to hang (even force kill does not work). It also may be a bad drive or some other issue because fdisk -l hangs after the first 2 HDDs (totaly of 8 HDDs on this system):
[1232879.903596] INFO: task fdisk:27176 blocked for more than 120 seconds.
[1232879.903607] Tainted: P&nbs........
I keep reading these drives are slower, but they are cheap and still SSDand work very fast for my needs.
As you can see the sequential read is 481-491MB/s, if I put them in MDADM RAID10 mode (normal RAID1) they should give me well over 900MB/s and with redundancy and being very cheap for what they offer.
[1232206.315622] scsi 8:0:1:0: Direct-Access ATA ADATA SU800&........
sudo fdisk /dev/sdh
WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: The size of this disk is 8.0 TB (8001563221504 bytes).
DOS partition table format can not be used on drives for volumes
larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID
partition table format (GPT).
The device presents a l........
forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X
forcedeth 0000:00:08.0: eth0: MSI enabled
forcedeth 0000:00:08.0: eth0: no link during initialization
ADDRCONF(NETDEV_UP): eth0: link is not ready
forcedeth 0000:00:08.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 1 18:21:32 box15 kernel: forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
Dec 1 18:21:32 box15 kernel........
The only solution after trying many suggestions was to simply restart the "vz" service (definitely not preferable).
Even doing an ifdown and ifup for venet0 did not help.
ifup venet0
Bringing up interface venet0:
Configuring interface venet0:
net.ipv4.conf.venet0.send_redirects = 0
RTNETLINK answers: Network is down
Some errors from log:
CPT ERR: d2dc60........
Now many people report this card simply not working in various Linux distros and kernels. My issue is different, it always works at 100mbit (eg. plugged into a 100mbit switch) but no matter what 1000M/gigabit switch I would try, it would never work.
The link would be up (the lights were on) and the OS detected the link as being up as well but it wouldn't work at all and could not pass data in or out (not even a ack/ping).
There is one simple solution and command........
Tired of checking iotop and seeing that your drbd partition is using 99.99% of io all the time and finding your drbd device performs slow in general?
This is especially an issue in versions of DRBD in the 8.3 tree in particular one documented case is on "8.3.13" but it likely applies to other devices.
The symptoms are that resyncing is fine and normal but any reasonable amount of activity is very slow and lagged and creates a high server load and con........
vzkernel-2.6.32-042stab116.2.x86_64.rpm&n........
Usage: geoiplookup [-h] [-?] [-d custom_dir] [-f custom_file] [-v] [-i] [-l]
Usage: geoiplookup [-h] [-?] [-d custom_dir] [-f custom_file] [-v] [-i] [-l]
grep: Address: No such file or directory
grep: not: No such file or directory
grep: found: No such file or directory
sh: -c: line 1: syntax error near unexpected token `|'
sh: -c: line 1: `|cut -d ',' -f 2'
........
migrating from an old OpenVZ (Centos 5) to new OpenVZ (Centos 6)
Also if migrating from 32-bit HN to 64-bit your RAM will probably be much bigger than it should be!
16x bigger
eg. 32bit HN:
total used free shared buffers cached
Mem:&nb........
I still cannot understand how this would not be enabled by default and I struggled to find the reason why with manually installing samba etc.. wondering why the option for sharing was not in the menu.
On Linux Mint "MATE" the package is called "caja-share" and on Cinnamon it is called "nemo-share" so edit the below command as necessary:
*Also note that the "samba" package is necessary as it is not inst........
VBoxManage modifyhd "my.vdi" --resize 60000
Note the above will resize my.vdi to 60,000MB........
Syncing private
Live migrating container...
Syncing 2nd level quota
11000: invalid option -- F
Usage: vzdqload quotaid [-c file] commands
Loads user/group qouta information from stdin into quota file.
-c file use given quota file
Commands specify what user/group information to load:
-G grace time
-U disk limits........
This happened while an mdadm array was syncing, all access from writing a new blank file to opening a small .txt file was very slow:
[222117.312078] kjournald starting. Commit interval 5 seconds
[222117.685060] EXT3-fs (md0): using internal journal
[222117.685096] EXT3-fs (md0): mounted filesystem with ordered data mode
[222122.376847] kjournald starting. Commit interval 5 seconds
[222122.602825] EXT3-fs (md2): using internal jour........
You may get this after a long time of not rebooting but especially if you have rsync'd a / partition or deployed an image to another VPS or computer, you will often have this issue.
The good thing it usually just takes a reboot.
Here is more info from Centos........
Errors like this are shown on high usage servers and ports so it is common to see it on http and even imap ports:
possible SYN flooding on port 80. Sending cookies.
The Linux kernel will even detect flooding on OpenVZ containers:
possible SYN flooding on ctid 6000, port 993. Sending cookies.
In many cases this is not an issue and is more so simply a result of regular, but high usage traffic.........
In Firefox I cannot connect to any website, proxy is disabled and outside network access is confirmed, no system or manual proxy was set on this Linux Mint/Ubuntu system. Normally this can be caused by proxy or DNS problems and the weird thing is that traceroute and ping to other IPs worked fine but even connecting to sites by IP was not working.
The connection was reset
The connection to the server was reset while the page was loading.........
kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3)
Varying opinions are out there but in general it seems like the most common culprit is a lack of privvmpages, with a modern OpenVZ system the best way is to set privvmpages as equal to what your RAM is and this has resolved the messages on another system.
If it's truly a TCP issue you can adjust the following parameters:........
wget -e robots=off
It is as simple as the above and this is something one must watch out carefully when using wget because you may think you have archived or downloaded content when you never did due to a nofollow/robots.txt statement.........
When you start uploading larger images in Wordpress you have to make sure your maximum attachment size is large enough and that the execution time is not too short:
Uploading
Error
HTTP error.
[Thu May 12 16:32:25 2016] [error] [client 10.10.5.2] PHP Fatal error: Maximum execution time of 30 seconds exceeded in /httpdocs/blog/wp-includes/class-wp-image-editor-gd.php on line 182
Solution Edit p........
pip install obfsproxy
/usr/lib/python2.6/site-packages/pip/_vendor/requests/packages/urllib3/util/ssl_.py:90: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.
InsecurePlatformWarning
You are using pip version 7.1.0, however version 8.1.1 i........
Does anyone have any suggestions on how to handle this error code? It is for a client who has a Windows 2008 R2 Datacenter License and wants to install virtual instances on the same host.........
Stopping httpd: [FAILED]
Starting httpd: httpd: Syntax error on line 73 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared obje........
At first my BIOS said the card may not work right because there is no more option ROM space.
I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly.
But it still cannot initialize the card properly(does not work):
[ 33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........
There are a few ways of doing this and all basically involve using the reverse proxy or "ProxyPass" feature of Apache to accomplish it.
1.) Create a normal vhost and simply symlink the root directory of the site you want to mirror.
Eg. originalsite.com and newsite.com
/vhosts/originalsite.com/httpdocs
You would symlink like this:
ln -s /vhosts/originalsite.com/httpdocs vhosts/originalsite.com/........
1.) Flash directly to this file:
http://tomato.groov.pl/download/K26RT-N/build5x-132-EN/Linksys%20E-series/tomato-E2500-NVRAM60K-1.28.RT-N5x-MIPSR2-132-Max.zip
*I was never able to get the larger "Mega" file to work, at least not initially so I recommend the file above.
To enable 5ghz I had to do the "Clear NVRAM" Option before it was shown.
2.) Or if you don't need 5ghz (most devices do not support it and cannot........
The Scenario
You have dual NICs and you disable NIC1 which uses 192.168.1.1 as its gateway. With NIC2 you enable it/connect it to another network which also has the gateway 192.168.1.1
Everything will work fine at this point.
When switching back to NIC1 even with NIC2 disabled and even unplugged, the OS basically can't pick up the new/updated ARP entry of the old device for 192.168.1.1 and perhaps thinks it is a security risk or spoof of some sorts and blocks i........
Add the following to fstab where 192.168.1.125/Media is the samba share and where /home/homeuser/Downloads is where you want to mount.
Change user and pass to what is needed (if no pass is required it still works fine with the below).
//192.168.1.125/Media /home/homeuser/Downloads cifs user=guest,pass=bla 0 0
mount: wrong fs type, bad option, bad superblock on //192.168.1.125/Media,
&nbs........
This command in Debian/Ubuntu/Mint will get everything need installed for most Java based KVM viewers:
sudo apt install icedtea-netx
The following additional packages will be installed:
ca-certificates-java icedtea-netx-common openjdk-8-jre openjdk-8-jre-headless
It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post.........
This was a horrible shock after upgrading fromUbuntu 9 to Linux Mint 17 and I found that the last distro to support tsclient was Debian Squeeze.
For some reason it has disappeared for a long time and the new options such as rdesktop and gnome-rdp do not have any start menu entry and just aren't done as well as tsclient.
Fortunately there is a solution:
tsclient surprisingly can be downloaded as a direct .deb package and it fails with some variou........
grub> root (hd0,0)
root (hd0,0)
Filesystem type is ext2fs, partition type 0xfd
grub> setup (hd0)
setup (hd0)
But if you do:
root (hd1,0)
setup (hd1)
it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical).
Checking if "/boot/grub/........
mono/wine not working in Ubuntu/Linux Mint/Debian:
The assembly mscorlib.dll was not found or could not be loaded.
It should have been installed in the `/usr/lib/mono/2.0/mscorlib.dll' directory.
solution:
sudo apt-get install mono-complete
Problems:
mono does not work well for even simple things like a Winrar self extracting .exe fi........
If the file size is too large you need to resize them on the fly:
convert -resize 25% *.jpg output.pdf
The resize flag takes a % I have tried without and it seems to take it as pixels and becomes way too small.
You can also play with the "-quality 25" flag to decrease file size even more.........
It is a common issue and here is the solution (increase the density/dpi):
convert -density 120 some.pdf output.jpg
You will need to play with the density setting to get the perfect file size and resolution.
If you want a smaller file you can always use the "-quality" switch and eg. -quality 25 would be 25%/100 quality........
How to Increase The Disk and Partition Size in Windows 2022,2019,11,10,8,7 etc.. Server
1, Enter the command prompt
Start -> cmd
2. Start diskpart
diskpart
3. Find the drive that has the wrong size
list volume
4. Select the volume (in this example we use volume 2)
select volume 2
5. Extend the volume........
This is useful in the case you are not properly logged in via an OpenVZ session or even a normal SSH session that you fear may go down(if the connection is broken the history is not saved).
Save your bash_history like this:
history -w ~/.bash_history
You can always change the above to another file eg /tm........
convert -append file1.jpg file2.jpg output.jpg
The above is all there is to it.
file1.jpg and file2.jpg are the ones to combine (the order is used)and output.jpg is the combined image.........
Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access.
So in this case you add a second physical or disk or already ha........
#solution
Edit /etc/yum.repos.d/openvz.repo
For the first two entries comment out #mirrorlist and uncomment #baseurl and then it worked
openvz yum problem Centos 6.5 cannot find file on mirror:
yum update
Loaded plugins: fastestmirror
Determining fastest mirrors
* openvz-kernel-rhel6: mirrors.ustc.edu.cn
* openvz-utils: mirrors.ustc.edu.cn
base ........
The solution was to reinstall the vbox dkms package and do a manual modprobe of the modules it makes.
I never sorted out the unable to start due to the USB issue, I did have the guest additions installed but the only way to boot was to change the pointing device from USB to PS2 and then to disable the USB controller (if your pointing device is set as USB, disabling USB will not work because it will re-enable by default when it sees your pointing device is USB, this is w........
freshclam
ERROR: Can't open /var/log/clamav/freshclam.log in append mode (check permissions!).
ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log).
Tue Oct 13 13:49:35 2015 -> WARNING: Incremental update failed, trying to download daily.cvd
Tue Oct 13 13:49:35 2015 -> WARNING: Can't download daily.cvd from db.local.clamav.net
Tue Oct 13 13:49:35 2015 -> Trying again in 5 secs...........
sudo apt-get install zoneminder
[sudo] password for one:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libuser-perl python-evince kdebase-apps kwrite unixodbc
libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp
python-mediaprof........
Your firefox is out of date if you get errors like below:
Secure Connection Failed
........
I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar:
yum -y install python-pip python-devel
No package python-pip available.
#install the EPEL repo
python-pip install obfsproxy
python-pip install obfsproxy
-bash: python-pip: command not found
pip install obfsproxy
&........
yum -y install wget
wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo
rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ
yum -y install vzkernel vzctl
#enable ip_forward
sed -i s/'net.ipv4.ip_forward = 0'/'net.ipv4.ip_forward = 1'/g /etc/sysctl.conf
#all interfaces should not send redirects
echo "net.ipv4.conf.default.send_redirects = 1" >> /etc/sysctl.conf
echo "net.ipv4.co........
Message from syslogd@server at Sep 14 11:35:59 ...
kernel:[Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
Message from syslogd@server at Sep 14 11:35:59 ...
kernel:[Hardware Error]: Error Status: Corrected error, no action required.
Message from syslogd@server at Sep 14 11:35:59 ...
kernel:[Hardware Error]: CPU:6 (10:8:0) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc00400021080813........
Phoenix phlash error
Cannot flash when memory managers ( e.g. HIMEM) are present.
press any key to exit.
Use the "/x" option to get past the above
........
-------------------------------------
ProCurve J4903A Switch 2824
Software revision I.10.77
Copyright (C) 1991-2009 Hewlett-Packard Co. All Rights Reserved.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to restrictions........
Fortunately the format is EATX so an EATX case will work and the screw layout is standard.
You will need to remove the HEX/TORX screws that are connecting the stock HP standoffs (meant to slide into an HP case).
XW9400 Motherboard Issues
Size: 12" x 13"
Proprietary Power Connector
Proprietary CPU Power Connector
Proprietary Memory Power Connector
Fan connectors are 4 pin so you will need some kind of adapter.........
0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2)
0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3)
0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3)
0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1)
0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2)
0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3)
0000:00:05.1 I........
Motherboard: Gigabyte GA-3CESL: http://b2b.gigabyte.com/products/product-page.aspx?pid=2658#dl
Dell Part Numbers for the motherboard: R1232 R1232L R2232S SERVER MOTHERBOARD GENUINE 408P9 CN-0408P9
GA-3CESL Manual Download here
RAMSlots: 16 (8 controlled by each CPU)
RAMType: DDR2 ECC 5300P........
so in this case we have files named like this:
track01.cdda.wav.mp3 track06.cdda.wav.mp3 track11.cdda.wav.mp3
track02.cdda.wav.mp3 track07.cdda.wav.mp3 track12.cdda.wav.mp3
track03.cdda.wav.mp3 track08.cdda.wav.mp3 track13.cdda.wav.mp3
track04.cdda.wav.mp3 track09.cdda.wav.mp3
track05.cdda.wav.mp3 track10.cdda.wav.mp3
but we want to rename them so they are like "05.........
#from epel repo
yum -y install opendkim
chkconfig opendkim on
cd /etc/opendkim/keys
opendkim-genkey -vd mail.server.com
opendkim-genkey: generating private key
opendkim-genkey: private key written to default.private
opendkim-genkey: extracting public key
opendkim-genkey: DNS TXT record written to default.txt
........
yum -y install dvdauthor ffmpeg mjpegtools sox bc
rpm -ivh dvd-slideshow-0.8.4-2.noarch.rpm
Preparing... ########################################### [100%]
1:dvd-slideshow ########################################### [100%]
/usr/bin/dir2slideshow: line 553: bc: command not f........
ResourceManager[31705]: CRIT: Resource STOP failure. Reboot required!
This happened on a cluster Iam running with heartbeat for no particular reason that I can figure out.
The box ended up rebooting itself for some reason. It was not a big deal in the sense that the other servers in the cluster kept running but it would be nice to find the cause of this.........
If a service is not working and resetting it to defaults is not working and you get bizarre error messages it is probably a broken update and possibly duplicate package.
Take in this case "exim" not working even after resetting to defaults.
Check for duplicates:
rpm -aq|grep exim
........
[ 17.208336] tg3 0000:08:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 17.210194] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX
[ 76.000065] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 76.002332] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 86.736004] eth0: no IPv6 routers present
[ 148.960038] phy0 -> rt2x00lib_request_fi........
What matters most about VPNproviders in 2024?
We are highly suspicious of VERYLARGE VPN providers that have LOW PRICES and HUGE DISCOUNTS. The suspicion is that for those who know what costs are involved to purchase thousands of IPs and servers are not small. At the prices that many of the big mainstream providers offer, it is likely unprofitable or barely profitable. Then, how are those companies making money or is that even the goal?
There use........
Thsi is very handy when doing your own kernel development.
-m specifies how much ram (in the example it is 768MB)
-kernel specifies the path to the kernel file
-net tap,ifname=tap1,script=no (the ifname=tap1 is what you need to change and setup manually).
*Run "tunctl -b" to create a tap device and use the one it gives you for ifname=
Enable networking to the outside like this:
*Note we assume that your bridge is br0 i........
Install the "Flashblock" plugin because we all know most unwanted high CPU usage situations come from the browser usually because of a looping Flash ad taking up 100% CPU.
The solution is to install the "Flashblock" plugin that doesn't allow any Flash to load and play unless you click on the placeholder.........
Account Functions -> Change Site's IP Address
Choose the domain and then click "Change"
Choose the new IP
1.) Setup SSL Certificate in cPanel
Click on "SSL/TLS Manager" under the "Security" section.
2.) Under " Private Keys (KEY)"
Click "Generate, view, upload, or delete your private keys."
Choose "Key Size: 4096........
This is the most secure way since we don't know if using the built-in ftp method of Wordpress is secure (that is do they store, record or transmit the ftp login information to a third party like the NSA?).
Upload or wget the plugin and then unzip it from the Wordpress website tot he following path of your wordpress:
/yourwordpressinstall/wp-content/plugins
Then navigate to the "Plugins" section on the left side o........
It is a permissions issue that is hard to fix.
All but one USB device is greyed out.
I am already a member of "vboxusers"
I have already enabled and disabled USB support for the guest.
I have already reinstalled the latest VBOx guest editions
If running as root it all works fine
Changing........
libguestfs tools howto guide for managing virtual machine images.
libguestfs-tools aka guestfs tools has a lot of tools that make this very easy for you. You can easily mount partitons from an image with some of the commands below.
To mount a partition
#mount the kvmuser102821.img image and the /dev/sda1 partition from it to the local directory "mount"
guestmount -a kvmuser102821.img -m /dev/sda1 mount
........
cc: Internal error: Killed (program cc1)
Please submit a full bug report.
See for instructions.
make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1
make: *** Waiting for unfinished jobs....
Stopping crond: ........
wget http://ftp.gnu.org/gnu/bash/bash-4.3.tar.gz
tar xzvf bash-4.3.tar.gz
cd bash-4.3/
wget --no-directories --level 1 --recursive http://ftp.gnu.org/gnu/bash/bash-4.3-patches/
for patch in `ls bash43-*|grep -v .sig$`; do
echo applying "$patch"
patch -p0 < $patch
done
./configure;make;make install
#it will install to /usr/bin/bash but if your bash is somewhere else you need to overwrite the old one.........
i337 Canada on Bell is hard to root or even install TWRP
Installed TWRP from Odin and my computer gave me the bluescreen at the end but it seemed to be successful (after ODIN said reset).
TWRP mode does not seem to enter, instead you get the Android recovery mode with Volume up + Home
http://galaxys4root.com/galaxy-s4-root/how-to-root-att-or-verizon-galaxy-s4-on-android-4-4-2/
1.)........
Aug 25 16:43:24 evohostingtor postfix/master[19471]: fatal: /etc/postfix/master.cf: line 24: field "unprivileged": bad value: "???"
Solution: I had the wrong thick dashes when c&ping (just retype them with your keyboard)
Aug 25 16:47:10 mailbox postfix/master[24498]: fatal: /etc/postfix/master.cf: line 25: bad transport type: syslog_name=postfix/auth-cleanup
auth-cleanup unix n - - - 0 cleanup
#-o syslog_name=postfix/........
It really seems that 4.4.4 is not ready or stable for the i717 yet and this makes sense since it takes a lot of work/development and testing to get the factory stock ROMs working well. In the end I used the 4.1.2 based Blackstra BlackJelly because it was fast, stable and just works and feels great. The aftermarket support is great but many devs are focussed on adding features and customization that most of us don't want or need rather than getting things smooth and stable.........
It's just a simple plugin that you get from here.
After that you can stopped having a barrage of annoying e-mails from WP:)........
CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting. I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts.
So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........
Say if you have a form/button like this:
........
mytop-1.4-2.el5.rf.noarch from rpmforge has depsolving problems
--> Missing Dependency: perl(DBI) is needed by package mytop-1.4-2.el5.rf.noarch (rpmforge)
solution:
#disabling excludes is required on CPanel type boxes which exclude most updates including perl-DBI
yum --disableexcludes=main install perl-DBI
mytop-1.4-2.el5.rf.noarch from rpmforge has depsolving problems
--> Missing Dependency:........
After the "latest" update one of our clients asked us to figure out the issue and it turns out it is related to the mail settings.
Basically all e-mails were being sent with blank text/no body.
The solution
Go to "Setup ->General Settings ->Mail" and just click on "Save" and it will work again.
Note that this assumes you didn't break things yourself by changing any settings. WHMCS may tell y........
http://sourceforge.net/projects/apacheoo-deb/files/debian/dists/wheezy/main/binary-i386/
To install AOO on your computer, you need to add the following entry to the /etc/apt/sources.list file:
deb http://downloads.sourceforge.net/project/apacheoo-deb/debian wheezy main
sudo apt-get update && sudo apt-get install openoffice-en* openoffice-brand-writer openoffice-brand-calc openoffice-brand-impress openoffice-brand-base open........
I used the matching 8.3.13 utilities and it didn't work but strangely the newer 8.3.16 which makes DRBD complain works just fine.
GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51
0: cs:SyncSource ro:Secondary/Primary ds:UpToDate/Inconsistent A r-----
ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5236960
&am........
It's always bothered me how Wordpress basically forces the user to provide their hosting credentials to install themes and plugins. How do know for sure the data is not being saved, intercepted and being provided backdoor access to the NSA or other agencies or even just being misused by others with access?
Here's how to close the security hole above and if you're already given Wordpress your credentials make sure you change everything associated it with it. Eg. change your........
#count=10000 makes an image of 10000MB make sure your image is at least the same as your existing
dd if=/dev/zero of=yourimage.img bs=1M count=10000
# losetup -fv newimage.raw
# fdisk -cu /dev/loop0
# kpartx -a /dev/loop0
# dd if= of=/dev/mapper/loop0p1
# e2fsck -f /dev/mapper/loop0p1
# resize2fs /dev/mapper/loop0p1
# a lot of guides tell you to edit /etc/fst........
yum -y install mathtools
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: centos.mirror.rafal.ca
* epel: mirror.steadfast.net
* extras: mirror.agmn.ca
* rpmforge: repoforge.mirror.constant.com
* updates: centosb5.centos.org
extras ........
http://realtechtalk.com/downloads/virtio-win-0.1-74.iso
Current Direct stable URL from Fedora: https://fedoraproject.org/wiki/Windows_Virtio_Drivers
Direct Downoad of Stable Virtio: https://fedorap........
./configure
./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory
Error: kernel version not found.
Please make sure your kernel is configured.
dr-xr-xr-x. 4 root root 4096 Feb 21 06:13 ..
lrwxrwxrwx 1 root root 45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25
drwxr-xr-x 2 root root 4096 Feb 12 20........
http://deepxw.blogspot.ca/search/label/Universal%20Termsrv.dll%20Patch
The above site has the patch that does this essentialy turning a Desktop Windows into a full fledged RDP server.........
This can happen when you install RPMForge or other repos with the wrong architecture and here's how you fix it (simply uninstalling won't usually fix it):
solution
yum clean all
yum -y install openvpn
Loaded plugins: fastestmirror, presto
Loading mirror speeds from cached hostfile
* base: mirror.its.sfu.ca
* extras: centos.mirror.nexicom.net
* rpmforge: mirror.cpsc.ucalgary.ca
* up........
yum -y install wget
wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo
rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ
yum -y install vzkernel vzctl
After that just reboot and you may also have to enable ip_forward in /etc/sysctl.conf........
Iused the slightly older "304.117" version and it worked.
With the newest version Icouldn't get X to start and kept getting these errors in messages/dmesg.
[ 2346.083660] nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
[ 2350.608342] NVRM: RmInitAdapter failed! (0x12:0x2b:1831)
[ 2350.608354] NVRM: rm_init_adapter failed for device bearing minor number 0
[ 2350.608369] NVRM: nvidia_frontend_open: minor 0, module->open() failed, err........
Error: Package: php-Monolog-dynamo-1.7.0-1.el6.noarch (epel)
Requires: php-aws-sdk
Error: php-pecl-zendopcache conflicts with 1:php-eaccelerator-0.9.6.1-1.el6.x86_64
Error: php-xcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64
Error: php-pecl-zendopcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64
Error: Package: php-horde-Horde-Vfs-2.1.2-2.el6.noarch (epel)
&n........
It's not as simple as "yum install" as you can see below and it doesn't stop there.
yum install php53
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: mirror.us.leaseweb.net
* extras: centos.mirror.rafal.ca
* updates: centos.mirror.nexicom.net
* base: centos.mirror.nexicom.net
* addons: centos.mirror.nexicom.net
Setting up Install Process........
I was worried the server was hacked, I was logged in already as root but couldn't login to CPanel or a new SSHsession. I even reset the password from the shell and it did not work still.
The reason is CPanel Hulk, it detected a brute-force attack so it locked down the root account entirely even from the correct password. According to cPanel the best way around this is to whitelist your IP.........
On some CPanel installs we see complaints of "/usr/local/cpanel/bin/apache_conf_distiller" causing 100% cpu usage without any solution.
Killing the process causes it to spawn again, actually it seems it tends to spawn multiple processes itself.
Restarting CPanel itself is a temporary but not permanent solution.........
[3805108.257042] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[3805108.257052] sd 0:0:0:0: [sda] Write Protect is off
[3805108.257054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[3805108.257066] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[3805108.257083] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[3805108.257090] sd 0:0:0:0: [sda] Write Protect is off........
I was having an issue with only certain random/jpeg files with the functions imagecreatefromjpeg imagecreatetruecolor and other related ones.
This issue was annoying basically it seems like a libgd issue/bug with newer versions of PHP and it was difficult to trace-out. One very useful thing that helped me was using "php-cgi" and passing the query string as an argument eg:
php-cgi images.php source=IMG.jpg (that way you get all the error messages wh........
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Not tained: 3.2.51-3.el6.x86_64 #1
Call Trace:
panic+0x8c/0x1a2
forget_original_parent+0x34d/0x360
exit_notify+0x12/0x140
do_exit+0x1d8/0x400
do_group_exit_+0x50/0xc0
sys_exit_group+0x12/0x20
system_call_fastpath+0x16/0x1b
panic occurred, switching back to text console........
wget http://download-location
sudo tar xjvf thunderbird-24.2.0.tar.bz2 -C /opt
ln -s /opt/thunderbird/thunderbird /usr/bin/thunderbird
[sudo] password for one:
ln: creating symbolic link `/usr/bin/thunderbird': File exists
sudo rm /usr/bin/thunderbird
ln -s /opt/thunderbird/thunderbird /usr/bin/thunderbird
The above is how Idid it, if you don't do it properly you'll find that you are still using the old version (........
wget http://download-location
mv /usr/bin/firefox /usr/bin/firefox-old
sudo tar xjvf firefox-26.0.tar.bz2 -C /opt
ln -s /opt/firefox/firefox /usr/bin/firefox
The above is how Idid it, if you don't do it properly you'll find that you are still using the old version (so verify in About that it is the new version). I've verified the above method works perfectly, it's great if you're using an older version of Linux and need to update the most........
This server has been running for weeks without issue, it's currently only using 1 of 2 CPUs as it is running in the office as a test bed (mainly due to the handle 12 bay storage/great for testing HDDs). The errors below seem to mainly be from AMD CPUs, it's only happened a single time and in the days since Igot that error it hasn't occurrred.
Interestingly enough /proc/cpuinfo still shows all 4 cores of the CPU (Opteron 2373 Quadcore HE) and the functionality doesn't seem........
Failed to load VMMR0.r0 (VERR_SUPLIB_OWNER_NOT_ROOT)
In most cases the error above is useful, it generally means /usr or /usb/lib or /usr/lib/virtualbox is not owned by root and this is the cause of the error.
Solution
sudo chown root.root /usr/lib........
yum -y install fail2ban
vi /etc/fail2ban/jail.conf
[asterisk-tcp]
enabled = true
filter = asterisk
action = iptables-multiport[name=asterisk-tcp, port="5060,5061", protocol=tcp]
sendmail-whois[name=Asterisk, dest=you@example.com, sender=fail2ban@example.com]
logpath = /var/log/asterisk/messages
maxret........
user the "--spider"switch and you can see what it would do.
wget -r --spider dontryrealtechtalk.com........
This happened after a customer migrated their hosting and the issue was being unable to access PHP sessions.
Warning: session_start(): open(/var/lib/php/session/sess_3e0oms763m6mrqekdnnmodlhs3, O_RDWR) failed: Permission denied (13) in /register.php(202) : eval()'d code on line 1
Solution:(use the correct ownership/permissions)
chown apache.apache -R /var/lib/php........
cat Xorginfo.txt|grep -nr "xserver-xorg"
Result:
9: sudo apt-get remove --purge xserver-xorg
13: sudo apt-get install xserver-xorg
17: sudo dpkg-reconfigure xserver-xorg........
On the same OS with the same kernels basically I cannot boot FreeBSD installer, I believe the issue is the host CPU.
One host runs an Intel and works, while an Opteron 2373 does not work despite suggestions from this thread: http://149.20.54.209/showthread.php?t=36761
I've tried cpu options like "kvm64" "Opteron_G3" and none........
wget --accept "*.pdf" -r http://somewebsite/page........
This happens because of a permissions or ownership issue.
Generally /var/lib/mysql should be all owned by mysql.mysql (check that).
To fix it use chown -R mysql.mysql /var/lib/mysql
Also make sure the files are at least readable and writable by mysql (eg. 700).........
Here is a handy script that will check all processes and report what is swapping
#!/bin/bash
for pid in `ps x|awk '{print $1}'`; do
result=`cat /proc/$pid/status|grep VmSwap|awk '{print $2}'|grep -v ^"0"`
if [ ! -z "$result" ]; then
programresult=`ps x|grep $pid|grep -v grep`
if [ $? == 0 ]; then
program=`echo $programresult|awk '{print $5}'|grep -v ^grep`........
mount -o bind /proc /sda2/proc
mount -o bind /dev/ /sda2/dev
mount -o bind /sys /sda2/sys
chroot /sda2
mint / # mount -o bind /proc /sda2/proc
mint / # mount -o bind /dev/ /sda2/dev
mint / # mount -o bind /sys /sda2/sys
mint / # chroot /sda2
mint / # cd ~
mint ~ # ls
Desktop
mint ~ # cd /
mint / # ls
bin Desktop dev-temp home&nb........
Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux
even setting privvmpages to a specific setting DOES not affect "free -m" in containers.
This is probably a kernel issue
23:36:29 up 159 days, 7:12, 4 users, load average: 0.42, 0.44, 0.33
[root@box13 ~]# free -m
total&n........
guestmount -a yourimage.img -m /dev/sda1 --ro /mountpoint
Change "yourimage.img"to the actual disk image.
Change "/dev/sda1" to the device on the disk image you want to mount.
--ro is specified only if you don't want write access (good to ensure you don't mess anything up if you just want to recover data).........
rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
i686:
rpm -ivh http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.i686.rpm
x64:
rpm -ivh http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
........
http://fedoraproject.org/wiki/EPEL#How_can_I_use_these_extra_packages.3F
Visit the above URL, choose your version and architecture and install it. EPELhas a lot of missing and extra packages that rpmforge does not.
For old versions of EPEL that are deprecated, eg.........
if [ ! -s /path/to/file ]; then
echo "file is blank or zero bytes"
fi
Use -s to check if it's larger than 0 bytes, Ilike to use the ! (not) operator to do this as shown above.........
/scripts/phpextensionmgr install PHPSuHosin
Updating md5sum list
Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)...
Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........
convert check.png -resize 25%x25%! check-resize.png
You can use a percentage or pixel sizes.........
I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards.
My particular model came with the following:
2U Rack Mount Server with Rails
2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times)
16GB RAM
2 x 250GB Seagate SATA
2 x Dell Perc 6/i (horrible and a nightmare to work........
The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results.
This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane.
Adapter #0
Enclosure Device ID: 32
Slot Number: 0
Enclosure position: N/A
De........
One thing to remember is that you need MegaCli to do the flashing.
You also need the correct file,I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli(they were really the wrong version). I have an external PCI-E Dell 6 Perc/I butI chose images from the 'Integrated" on motherboard version as it was allI could find. They are different, and below is my first time finding success.........
I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally.
I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli
wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN
--2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN
Resolvi........
LSi Megaraid
At first it was configured as a RAID 0, then I deleted the Virtual Disk Group.
I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing.
To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
rpm -ivh http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
Retrieving http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
Preparing... ########################################### [100%]
1:rpmforge-release #############........
rkhunter --update
Running updater...
Mirrorfile /var/rkhunter/db/mirrors.dat rotated
Using mirror http://rkhunter.sourceforge.net
[DB] Mirror file : ERROR
Fatal error: Problem while fetching file
........
pxe-32 tftp open timeout
The solution was to enable tftp in xinetd with "chkconfig tftp on".
See the troubleshooting below:
chkconfig --list
NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off
acpid 0:off&n........
iptables -t nat -A PREROUTING -p udp -m multiport --dports 20,123,443 -j REDIRECT --to-port 53
getsockopt failed strangely: Invalid argument........
yum update error
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py", line 229, in user_main
errcode = main(args)
File "/usr/share/yum-cli/yummain.py", line 145, in main
(result, resultmsgs) = base.buildTransaction()
&nbs........
This is basically URL decoding to the decimal code but nothing in PHPworks how you'd expect it.
Here are online tools to verify and check your work, it's important when querying databases with non-English characters:
http://yehg.net/encoding/index.php#
http://meyerweb.com/eric/tools/dencoder/
http://www.codetable.net/decimal/65398
Japanese:
http://symbolcodes.tlt.psu.edu/bylanguage/japanesechartkatakana.html
Charat code for PHP:........
package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture
Linux etc 2.6.18-274.7.1.el5xen #1 SMP Thu Oct 20 17:06:34 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
As you can see above architecture and kernel is 64-bit but I had to force it to install using "--ignorearch"
Solution
#rpm --ignorearch -ivh kernel-xen-2.6.18-274.7.1.el5.x86_64.rpm
Preparing...&nb........
These drives seem to die very easily during shipping:
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 18 8b 65 e0 00 00 08 00
end_request: I/O error, dev sda, sector 411788768
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 18 8b........
This is important if you need public access to internal IPs such as at your office and don't want to use a VPN just to SSHinto different servers:
Below forwards the port "10001" to the IP192.200.5.53 on port 22 (of course adjust it to your needs).
iptables -t nat -A PREROUTING -p tcp --dport 10001 -j DNAT --to-destination 192.200.5.53:22
Remember to enable MASQUERADE on your NAT IPs or they won't be able to talk to the outside world (........
Use imagemagick:
convert -density 200 file.pdf file.jpg
Increase the "density" value to get a higher resolution/larger file an decrease it to go smaller.
This is really the quickest and simplest way.
Some issues you may have:
http://realtechtalk.com/ImageMagick_Convert_PDF_Not_Authorized-2217-article........
I installed Ubuntu 11.04 for testing purposes but I couldn't even download SSH server:
sudo sed -i -e 's/us.archive.ubuntu.com/old-releases.ubuntu.com/g' /etc/apt/sources.list
After running the above make sure you do a "apt-get update"
Note with the above that Ihave the search string of "us.archive.ubuntu.com" change it to whatever is in your sources.list
The above does not fix all repositories either, I haven't had a chance t........
Jun 12 10:30:53 kernel: [724514.291670] EXT4-fs error (device md20): ext4_add_entry: bad entry in directory #2552670: rec_len % 4 != 0 - offset=216, inode=2553603, rec_len=94, name_len=84
Jun 12 10:30:53 kernel: [724514.292400] EXT4-fs error (device md20): ext4_add_entry: bad entry in directory #2552670: rec_len % 4 != 0 - offset=216, inode=2553603, rec_len=94, name_len=84
This happened when an unprivileged user was backing up a Windows filesystem, once they ha........
Image -> Mode -> RGB........
Make sure that the Page mode is set to landscape and that the columns fall within the margins/boundaries, otherwise this is why there will be blank pages (Print Preview will show you this too).........
Another new drive bad from the start:
Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error
Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........
Have you ever unplugged the wrong drive and then had to rebuild the entire array? It may not be a big deal in some ways but it does make your system vulnerable until the rebuild is done.
Many distros often enable the "bitmap" feature and this basically keeps track of what parts need to be resynced in the case of a temporary removal of a drive from the array, this way it only needs to sync what has changed.
To enable bitmap to speed up rebuilds and sync........
This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad.
ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:00:........
I haven't updated VBOX in ages but have never seen this issue and it has my CPU running at 100C.
Manually/forcefully killing the process does not work with "kill -kill 3892".
I've closed the VBOXManager and everything else related to it.
This did seem to happen around the time I ran VBoxManage clonehd and it failed, the terminal issue locked up and also never wrote a byte of anything. I forced killed the VBoxManage and tried to remove &........
Once I set a new MAC address everything was fine and finally anything can be pinged etc.., I've had this happen with many clients in different datacenters on different hardware.........
mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142)
One of my clients almost found out the hard way, here is an unlikely situation that happened.
1.) Years ago the client had another VPS to which they backed up a BLOG nightly to an .sql file, what they forgot is that the file also contained all databases (they used the --all-databases option but forgot). So imagi........
flush privileges;
ERROR 1146 (42S02): Table ‘mysql.servers’ doesn’t exist
This happened to me on a system running Centos with the REMI repo and a new version of Mysql 5 (which the official Centos/RHEL does not support on version 5).
The solution is just to run this program "mysql_upgrade", after that flush privileges will work.
mysql_upgrade........
This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others:
Choose CountryCanadaJapanUnited StatesUnited KingdomAfghanistan........
If you make changes to /etc/sysctl.conf (which are permanent and not lost during reboot) but want them to apply with rebooting just use the following command:
sysctl -p
After that your changes will be enabled.........
smartctl -a /dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: ATA WDC WD1600YS-01S Version: 20.0
Serial number: WD-WCAP03024940
Device type: disk
Local Time is: Mon Apr 29 21:40:07 2013 PDT
Device does not support SMART
Error Counter logging not supported........
If you move your hard drive(s) around to other computers/servers, you'll find that your eth0 keeps getting higher, the first time it will become eth1 and then eth2 etc and even higher if your server has dual or quad NICs. The reason is that udevd basically assigns eth0 tot he first NIC it finds and remembers it, if it encounters a NIC with a differentMAC, it assigns it one higher (eg. eth1).
See the example below, I have eth2 now so how doI fix it?........
Client Log
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 192.168.1.253 [192.168.1.253] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type 1
debug1: identity file /root/.ssh/id_d........
Kernel panic - not syncing: Attempted to kill init!
Pid: 1,comm: init Tained: G I------------- 2.6.32-358.el6.x86_64 #1
Call Trace:
[] ? panic+0xa0/0x16f
[] ? do_exit+0x862/0x870
[] ? fput+0x25/0x30
[] ? do_group_exit+0x58/0xd0
[] ? sys_exit_........
This is a handy link and list of all the relevant Directadmin log files and related servers.
http://help.directadmin.com/item.php?id=11
DirectAdmin:
/var/log/directadmin/error.log
/var/log/directadmin/errortaskq.log
/var/log/directadmin/system.log
/var/log/directadmin/security.log
Apache:........
vgchange -ay
3 logical volume(s) in volume group "vg_12" now active
lvscan
inactive '/dev/vg_12/lv_root' [144.04 GB] inherit
inactive '/dev/vg_12/lv_home' [1.00 GB] inherit
inactive '/dev/vg_12/lv_swap' [7.85 GB] inherit........
vzquota : (warning) block_hard_limit [102] < block_current_usage [520824]
This is because your disk usage of the container exceeds the quota.
Eg. once on a test container I had accidentally set it to 32MB yet the OS took about 600MB.
Just set the quota to something bigger than the currently used space to solve it.
vzctl set 3891 --diskspace 5G:5G --save........
Solution To The Following:
yum -y install zlib-devel
yum -y install e2fsprogs*
*** Cannot find /usr/include/et/com_err.h. (yum install libcom_err-devel) ***
Installation didn't pass, halting install.
Once requirements are met, run the following to continue the install:
cd /usr/local/directadmin/scripts
./install.sh
Common pre-install commands:
http://help.directadmin.com/it........
I chose this because I heard a lot of stories about scams and that many providers I contacted said they can't unlock the Canadian I717s (one said "my Bell server" is down).
This method worked perfectly on my Bell I717M and should work for all I717 in Canada, I was able to insert a foreign SIMcard. This will work abroad too but remember entering CWM mode is different for I717's in other countries (at least theUS).
Step 1 - Root + CWM........
Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........
[1433128.139339] sd 5:0:1:0: [sde] Unhandled error code
[1433128.139343] sd 5:0:1:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[1433128.139348] sd 5:0:1:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[1433128.139360] end_request: I/O error, dev sde, sector 0
[1433128.139410] sd 5:0:1:0: [sde] Unhandled error code
[1433128.139414] sd 5:0:1:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[1433128.139420] sd 5:0:1........
Step #1 - Create Wrapper Script
vi /usr/local/bin/phpsendmail
#!/usr/bin/php
........
This pops up when connecting the phone and it doesn't seem to charge. The phone keeps showing a status message every few seconds "Connected as a media device".
It's ridiculous why this phone doesn't just default as a simple USB Mass storage device.
Here's what I see in /var/log/messages:
Jan 30 18:51:27 QuadCoreAM2 kernel: [18038228.144046] usb 1-3: new high speed USB device using ehci_hcd and address 24
Jan 30 18:51:28 QuadCoreAM2 ke........
thunderbird -ProfileManager
Type that from the command prompt and you can choose, that's the only way you can do it whichI find a bit silly.........
cat | grub --device-map=/dev/null
Now pay close to the attention of the beginning.
Type: "device (hd0) VPS.img" this is telling what hd0 will be to GRUB and we're telling it the disk image file "VPS.img" in the current directory is hd0, you can specify alternate paths and image names of course.
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-li........
This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel.
I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk.
I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one).
This is strange but it seems like this Xen PV guest has some sort of hidden or........
I closed program by program untilI found the culprit, it's baffling how the cause was Thunderbird but then again it does use a lot of memory and I have thousands of messages between dozens of mailboxes.
But still I don't think this should happen and Xorg shouldn't allow this either.
So for those who have mysteriously high CPUusage from Xorg start closing program by program until you find the culprit.
The interesting thing is that after reloading it, the Xor........
Inever started these processes but they are from a custom based bootable Linux I've made and I've never seen this behavior on other machines or even with the same machine using different kernels. These processes seemed to spawn on their own and I have no idea why and even worse why the CPU usage is so high?
Here's the output from top:
907 extaudit 30 10 0 0 0 R 90.7 0.0........
Cannot load certificate file keys/server.crt: error:0906D06C:PEM
The .crt is blank empty because when generating it I kept hitting enter for the defaults and this caused the crt not to be signed.
Certificate is to be certified until Dec 18 00:35:49 2022 GMT (3650 days)
Sign the certificate? [y/n]:y
1 out of 1 certificate requests certified, commit? [y/n]y
So if you get messages like these, a........
This is very handy if you're too busy and don't have time to download whatever files you need.
The -D specifies the domains allowed, this is because I specified -H which means foreign hosts are allowed, if you don't restrict them you'll end up going to the whole internet via ads and other links just like a search Engine would follow.
-l 0 specifies to go deep, to as many levels as possible/as exist.
-e robots=off is important because robots.txt often says you can't vie........
This is something I often setup for clients because it's very helpful for people in datacenters, this allows custom OS installs on demand, you can customize it more by using kickstart etc.. but here's a base I use before customizing more:
This little script below will install everything you need to get booting by PXE Linux.
It also assumes you set a local IP (be sure not to overwrite your existing IP) on eth0:0 (note the :0) as 192.168.1.10 and it........
qemu-img create -b centos.5-8.x86.20120308.qcow2 -f qcow2 ../kvmguests/25000-centos5.8x86.qcow2
Formatting '../kvmguests/25000-centos5.8x86.qcow2', fmt=qcow2, backing_file=centos.5-8.x86.20120308.qcow2, size=10485760 kB
-b the source/base image
-f format is qcow2 and the location of the destination image
What is so special about this? It's even quicker than creating a template with OpenVZ but this is an actual OS.
It saves time a........
mdadm --manage /dev/md1 --add /dev/sdb1
mdadm: metadata format 00.90 unknown, ignored.
mdadm: metadata format 00.90 unknown, ignored.
mdadm: metadata format 00.90 unknown, ignored.
mdadm: /dev/sdb1 not large enough to join array
md1's first primary member /dev/sda3 has 57394 cylinders while the /dev/sdb1 has 57393 (1 less cylinder) which is why it won't work.
fdisk -l /dev/sda3
Disk /dev/sda3: 47........
This error in my experience is user error although CPanel doesn't help, this message doesn't give you much to go on.
Let's talk more about the process of setting up SSL with CPanel.
Your site must have a dedicated/non-shared IP to even have the option of creating an SSL Certificate.
You must create a Private Key (do not delete this private key!)
You must create a CSR (Certificate Signing Request)
Use CSR to create cert........
I backed up everything in the /mnt/sd_card directory thinking that some dataloss could occur for some reason but purposely left my microSDHC unbacked up thinking that "it won't touch that since it's external" and Samsung's and other manufacturers website even say this (that it won't be affected and not to worry etc).
Apparently I was wrong, my microSD was "undetected" and asked to be formatted after the upgrade (there goes 3-months worth of family photos). No........
This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server).
You may need to upgrade to PHP5.3 to run Joomla or many other reasons.
Your host needs to use PHP 5.2.4 or higher to run this version of Jo........
ERROR 1045 (28000): Access denied for user 'contentmanager'@'localhost' (using password: YES)
For fun I thought I'd reset the password:
GRANT ALL ON thecontent.* TO contentmanager IDENTIFIED by 'dfdfsdfdsfsdfsd';
ERROR 1470 (HY000): String 'contentmanager' is too long for user name (should be no longer than 16)
This is ridiculous that this new version has some bizarre 16 character username limit and not only that but i........
VBoxManage modifyhd XP.vdi --resize 15000
VBoxManage modifyhd XP.vdi --resize 15000
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
That resizes the virtual hard drive image "XP.vdi" to 15000MB instantly.
I doubt this is safe to do while the VM is running and I'm not sure if it would attempt it still but turn the VM off first to be safe.
I also notice in the VBOX GUI that it still shows the orig........
Error: detected vswap CT config but kernel does not support vswap
This means either old kernel or bad config (physpages NOT set to 0:unlimited)
Solution
vzctl set $veid --physpages 0:unlimited --save........
[ 12.460014] ata1: SRST failed (errno=-16)
[ 17.626677] ata1: link is slow to respond, please be patient (ready=0)
[ 22.480011] ata1: SRST failed (errno=-16)
[ 27.646681] ata1: link is slow to respond, please be patient (ready=0)
[ 38.106817] ata1.01: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 48.266676] ata1: link is slow to respond, please be patient (ready=0)........
I admit I didn't know you could do this for the longest time and is an annoying feature of screen.
In order to scroll up and down just hit "Ctrl+a+Esc" or "Ctrl+a+[" and then you can Pageup, Pagedown and using the arrow keys.........
wget -N http://httpupdate.cpanel.net/latest;sh latest
That one command above will do it all (and it takes a long time to install/compile). After that you can access CPanel with your root login information by visiting https://yourdomain-or-ip.com:2087
I personally don't like CPanel (bloated, full of bugs, no shared SSL, difficult to use etc..)but I admit it's easier to install than........
I experienced this with CPanel's Exim after an auto-update (a Google of this error produces lots of complaints with few clear solutions). In this case I'll put the solution at the top.
Run /scripts/buildeximconf to rebuild the Exim config and it should be fine after that.
mail -vs "from test" user@dest.com < .bash_history
LOG: MAIN
cwd=/root 4 args: send-mail -i -v user@dest.com
LOG: MAIN
&........
For years I've always built cheap systems believing that there is little difference in more expensive components when it comes to reliability and quality, I generally believe this still except for Power Supplies.
I've always bought cheap cases with nice sounding 350-550W stock/cheap/crap power supplies and haven't had any issues for the most part until recently.
One such case is an NGEAR case with a 550W Optimax power supply, I always read that these supplies don't produce the........
I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen.
I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........
I'm running Ubuntu 10.10 with Asus NVIDIA GT430
2.6.35-32-generic-pae #65-Ubuntu SMP Tue Jan 24 14:06:16 UTC 2012 i686 GNU/Linux
Nvidia binary driver: 260.19.06
The screen sometimes completely freezes and locks up or everything starts going very slow:
[1903398.100007] NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context
[1903402.373210] NVRM: Xid (0001:00): 53, CMDre 00000000 00000080 00000000 00000005 00........
fdisk -lu VPS.img
last_lba(): I don't know how to handle files with mode 81ed
You must set cylinders.
You can do this from the extra functions menu.
Disk VPS.img: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders, total 0 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End ........
One of my test Centos 5 containers was on a partition that filled up and it threw all sorts of errors and stopped responding but now I can't boot it again anymore.
All the console shows is the Linux Penguin on the top left corner and the xm console says "usbcore: registered new driver hub" and has halted there.
Centos 5 Xen container stuck/frozen won't boot on "usbcore: registered new driver hub"
Another great way of troubleshooting is booting fro........
I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene. This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately).
The most common reason may be that "linux-source" hasn't been installed automatically on my system. I tried to manually reinstall the........
I really am a Linux fan but my comments here may not show it. Although I'm quite familiar with Linux CLI to administer servers, I find Linux GUI OS's like Ubuntu at times very clunky.
This is partially because there's no such thing as a "self-made" Linux from scratch where the UIwas designed by a single team. Linux is made up of several different projects that are generally completely separate and this lack of integratiion is a key issue that makes things f........
I used the suggested script to bridge from OpenVPN and it took my client's server off-line! Don't ever use their "sample" scripts if you don't have another way of accessing the server than SSH.
I actually found it easier to use iptables to tell it to route IPs based on a certain subnet to route through eth0:
iptables -t nat -A POSTROUTING -s 192.168.200.0/24 -o eth0 -j MASQUERADE
Replace "192.168.200.0/24" with your subnet of cour........
It really is as simple as:
cdrecord -v dev=/dev/sr0 pathtoyourisoimage.iso
-v is for verbose, I prefer it but if you don't you won't see as much output like below (I like to know the details and exactly what's happening)
dev=/dev/sr0 specifies the device name of your burner (they say not to use it and to specify some weird annoying device string but using the raw /dev has always worked for me and is how it should have been implemented from the start IMHO)........
*Make sure that the ownership is 501.501 or mobile.mobile when copying back (especially if using ssh or sftp as root on the iPhone) otherwise things will break. Eg. the contacts will be blank even after trying to update due to incorrect ownership/permissions.
iPhone Notes Location/Restore:
/private/var/mobile/Library/AddressBook
AddressBookImages.sqlitedb AddressBook.sqlitedb
Once you restore the contacts and restar........
Visit http://linux.softpedia.com/get/Programming/Interpreters/Android-32340.shtml
Basically copy and paste all of that below and you'll have installed and started the Android SDK before you know it.
wget http://dl.google.com/android/android-sdk_r12-linux_x86.tgz
sudo apt-get install openjdk-6-jre openjdk-6-lib openjdk-6-jre-headless
tar -xvf android-sdk_r12-linux_x86.tgz
cd android-sdk-linux_x86/tools
./android........
These were caused by a bad stick of Corsair RAM
[] free_hot_cold_page+0xfc/0x150
[] __pagevec_free+0x14/0x1a
[] release_pages+0x127/0x12f
[] __pagevec_release+0x15/0x1d
[] __invalid_mapping_pages+0x120/0x156
[........
Have you ever found a website/page that has several or perhaps dozens, hundreds or thousands of files that you need downloaded but don't have the time to manually do it?
wget's recursive function called with -r does that, but also with some quirks to be warned about.
If you're doing it from a standard web based directory structure, you will notice there is still a link to .. and wget will follow that.
Eg. let's say you have files in http://serverip/documen........
A few days ago this happened on multiple Centos 5 servers and apparently anyone using rpmforge was affected by this error and there was no solution other than disabling that repo to fix it.
To some this highlighted a few points, that there is a reason RHELexists with full paid support, and also that this could be a vulnerability and huge flaw with yum. A yum search or install should not segfault just because the rpmforge repo goes down.
Fortunately it came back up........
I am watching the Canucks riot and a reporter said Twitter is down.
My home connection on Shaw is fine, but when Iused my Rogers network over the cell, it says "Rate Limit Exceeded". I wonder if this is a transparent redirect by Rogers under police order?
I noticed that the Telus network loaded Twitter just fine.........
netstat is weak and can't show udp connections and most other protocols, use "ss" which is what netstat should have been:
The "-u" switch stands for udp, here's a list of other options:
Usage: ss [ OPTIONS ]
ss [ OPTIONS ] [ FILTER ]
-h, --help this message
-V, --version output ver........
I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM.
I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives?
Also no swap space was ever used!
cat /proc/s........
I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem:
We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior:
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZ20139
Firmware Version: 50.0AB50
User Capacity: 2,000,398,934,016 bytes
Device........
It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work.
I only get this error with the openvz.repo and not others such as Centos-Base.repo
With my other server it works normally:
================
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename.]
grub> root (hd1,0)
Filesystem type is ext2fs, partition type 0xfd
grub> setup........
I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead):
ata1: link is slow to respond, please be patient (ready=0)
ata1: softreset failed (device not ready)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: link online but device misclassified, retrying
ata1: link is slow to respond, please be patient (ready=0)
ata1: softreset f........
This assumes that you've at least created the correct partition for your DRBD already.
Notice that I am "diskless", that's because either your DRBD partition doesn't exist/has been renamed (eg. sdb becomes sda when sdb dies and you reboot) or because that drive is really actually dead/gone.
*If you need to permanently change the partition/device for your resource be sure to edit /etc/drbd.conf on both hosts and reload the config.
(replace r0 with........
I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though.
There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........
VBoxManage modifyvdi /path/to/your.vdi compact
I believe this should be done only when your VM is powered off, but I decided to try it with the system powered on. i wouldn't recommend it because it's dangerous even if it does work but this is a test system. For anything important/production I would always take a backup first and make sure the system is powered off.
VBoxManage modifyvdi XP-clone.vdi compact
0%...10%...20%...30%...40%...5........
You can't just do a straight copy of the VDI image of your virtual machine because there is a unique UUID, wellI believe you can and then you can create a new UUID manually (at least you could with VMWARE) but to keep it clean just use this method:
VBoxManage clonevdi /path/to/your.vdi outputname.vdi
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
That's all there is to it, just wait for it copy and you can th........
In file included from drivers/block/cciss.c:1015:
include/asm-generic/pci-dma-compat.h: In function `cmd_special_free':
drivers/block/cciss.c:196: sorry, unimplemented: inlining failed in call to 'cciss_tag_discard_error_bits': function body not available
include/asm-generic/pci-dma-compat.h:25: sorry, unimplemented: called from here
make[2]: *** [drivers/block/cciss.o] Error 1
make[1]: *** [drivers/block] Error 2
make: *** [drivers] Error 2........
If you have a webserver and find you have high IO/lagginess MySQL is one of the first things to check. It turns out MySQL was my problem and it was creating a high load on my server, especially for IO.
How to Enable MySQL Slow Query Logging To Find Slow Performance/Queries
vi /etc/my.cnf
Add this anywhere under [mysqld]
#slow queries
log-slow-queries = /var/log/mysql/mysqlslowqueries.log
long_query_time = 1........
mod_status is a great way to track down the source of high CPU usage and to find what vhost/script is the cause of it.
It gives you a live view of bandwith usage, CPU usage, and memory usage broken down by domain/vhost and script/URI.
Enable mod_status
vi /etc/httpd/conf/httpd.conf
ExtendedStatus On
SetHandler server-status
Order Deny,Allow
Deny from all
All........
yum -y install vnstat
chown nobody.nobody -R /var/lib/vnstat/
#replace venet0 below with your desired interface
sudo -u nobody vnstat -u -i venet0
#edit: vi /etc/sysconfig/vnstat
#VNSTAT_OPTIONS="-i venet0"
# only use the sed below if you are using venet0 instead of eth0 or replace accordingly
sed -i 's/eth0/venet0/g' /etc/sysconfig/vnstat
[root@monitor]# yum install vn........
smartctl -t long /dev/sda (note you can specify short, but it's not as thorough as long of course).
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended sel........
You need to enable the httpd daemon with monit to actually view the status and control, it's not only for the web interface since the httpd is theONLY way of controlling monit and viewing the status.
monit monitor all will also reinstate disabled services if they've timed out too much. Just restarting the service will do nothing to re-monitor a service that monit has stopped monitoring due to too many failures.
*Also note that /etc/monit.conf i........
My mother needed a new laptop and I recommended her the same one I would have bought myself or my wife, that means the cheapest possible laptop with the most features for the money.
This HP shines at this price point and one thing that made me stay away from buying more and recommending HP/Compaq was the poor battery life. Not anymore, this model has an industry leading up to 4 hours of battery life.
Key Factors for Choosing It:
HDMI Out........
convert -density 400 somepdf.pdf -scale 2000x1000 output.jpg
The key is the "-density 400" switch and also -scale 2000x1000
To give credit I found the solution here: http://www.imagemagick.org/discourse-server/viewtopic.php?f=1&t=10928
That was the perfect solution when I was frustrated with how small the resulting JPG's resulted. I'm sure this will help a lot of people when it comes time to converting a PDF to JPG which I'm amazed Imag........
drup 6.2 install
$cd drupgoodinst3883/
[ drupgoodinst3883]$ ls
CHANGELOG.txt cron.php index.php INSTALL.pgsql.txt INSTALL.txt MAINTAINERS.txt modules robots.txt sites update.php xmlrpc.php
COPYRIGHT.txt includes INSTALL.mysql.txt install.php LICENSE.txt misc&........
I don't expect this to be solved soon but some of Yahoo's DNS servers are out of whack. I changed the IPs of some nameservers of some domains and now most Yahoo users can't e-mail to those domains!
As you can see below by the "No MX or A records for mychangedomain.com", now Yahoo's DNS/mailserver DNS cache is wrong. You would think they would at least have cached the old incorrect records, but instead for some reason their DNS cache has no entry and doesn't seem........
high IO wait
424 root 39 19 1900 848 552 D 0.0 0.0 0:00.91 updatedb
root 424 0.0 0.0 1900 848 ? DN Mar11 0:00 /usr/bin/updatedb -f sysfs?rootfs?bdev?proc?cpuset?binfmt_misc?debugfs?sockfs?usbfs?pipefs?anon_inodefs?futexfs?tmpfs?inotifyfs?eventp........
Santrex Review/Scam/Complaint
Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support admitted the server was not working and to wait for 24 hours. I waited for 4-days, after which they sent an e-mail saying my service was being disabled for SPAM ...(when SolusVM shows 0kb of traffic). Th........
There are all kinds of threads and links on the internet, and this seems to be a contentious issue butI don't know why.
95th percentile is either a good deal for some or a big rip off for others, Ijust said it there :)
But the reality is that for MOST people who transfer low amounts of data but burst to higher speeds such as 40mbit+ even for short periods of time, then you'll pay a lot of money to do that.
Basically 95th percentile is an-old archaic method........
*Remember to restart spamassassin after all of this.
DCC
wget http://www.dcc-servers.net/dcc/source/dcc.tar.Z
tar -zxvf dcc.tar.Z
cd dcc-1.3.138/
./configure;make;make install
#enable DCC, uncomment the line that disables it near the top
vi /etc/mail/spamassassin/v310.pre
pyzor
wget http://sourceforge.net/projects/pyzor/files/pyzor/0.5.0/pyzor-0.5.0.tar.gz/down........
These are the only two I've encountered but here is the low-end and note my story is not at all unique.
In my case I was scammed out of money and did not receive any service at all from either company.
Santrex Review/Scam/Complaint
Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support adm........
Centos 5 Postfix and SPAMASSASSIN Tutorial
yum install spamassassin
chkconfig spamassassin on
vi /etc/mail/spamassassin/local.cf
##############
#required_hits 5
#report_safe 0
#rewrite_header Subject [SPAM]
#5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives
require........
yum -y install openssl* gcc-c++ gcc flex g++ make;wget http://www.directadmin.com/setup.sh;chmod +x ./setup.sh;./setup.sh
#enable SSL
/usr/bin/openssl req -x509 -newkey rsa:1024 -keyout /usr/local/directadmin/conf/cakey.pem -out /usr/local/directadmin/conf/cacert.pem -days 9999 -nodes
chown diradmin:diradmin /usr/local/directadmin/conf/cakey.pem
chmod 400 /usr/local/directadmin/conf/cakey.pem
sed -i "s/SSL=0/SSL=1/g" /usr/local/dire........
I'm posting this because it wasn't easy or obvious how this would be accomplished and the man page leaves it to guesswork.
Multi-line body_checks
Example 1
/........
ls
ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory
This is not an ldd problem or case of anything missing, this only happened after I upradedUbuntu.
declare -x PATH="/home/user/bin:/usr/local/bin:/usr/bin:/bin:/usr/games"
"/home/user/bin" is the problem! It's weird because I have no idea how it happened.........
xmessage "Your message here" -display :0
This will popup a window with the message, it would be cool if it allowed two way communication though.
I found the info in this post: http://en.andregondim.eti.br/?p=72........
Use "ImageMagick" which can be installed easily on most UNIX/Linux distros.
Remember that it will go with the standard file listing to determine the order but I believe you can manually specify multiple jpg's in the arguments.
Convert image/jpg to PDF
convert *.jpg yourpdf.pdf
This is a very handy and free tool.
Convert DOC/TXT documents to PDF
If you wanted to convert a .doc file or text........
I right clicked all applicable cells and chose "number" but that's enough.
I notice when I click the cell there is an invisible ' in front of the number:
'33.64
Calc imported my CSV and decided to add a ' in front of the numeric currency values!!!*Actually the problem occurs when you right click the cells and change the type from text to number, no matter what format you choose.
If I change it to be currency i........
Convert MBOX Mail files into Maildir using Linux
*You need perl an the TimeDate module
Get the free Perl script mb2md from the project/author's site:
wget http://batleth.sapienti-sat.org/projects/mb2md/mb2md-3.20.pl.gz
gunzip mb2md-3.20.pl.gz
#remember you need timedate or you'll get this error:
./mb2md-3.20.pl
Can't locate........
The first thing you need to remember is not to check from the same host/server itself. This is a silly mistake I made, the reason is that many mailservers and especially postfix are configured to allow relaying from the localhost/same host. If you do that you'll get a false positive.
*Make sure you test from another host/system than the mail server itself!
telnet yourmailserverhost.com 25
220 Courier (FreeBS........
Basically you should always be 100% sure that whatever IPyour mail server sends out with has reverse DNS/PTR records. Remember that unless you own your IPs then you won't be able to set your own reverse DNS. Even if you were to create a reverse PTR record on your DNS servers it will be ignored. Reverse DNS is queried to pre-assigned DNS servers of your ISP, so therefore you'll need to contact your ISP/Colo/Hosting provider to do a reverse DNS entry.
If you don't have........
I think this will be useful to others because I have a server that kept crashing mysteriously during intense disk usage/RAID checks. It would only crash during the weekly RAID integrity check.
ThenI noticed during a reboot that not all CPUs were being brought up, as a result this actually creates much higher temperatures with the output I got from sensors, just booting the system produced higher than normal temperatures.
You can imagine that a full blown RAID check........
genuine.com/IN: loading master file genuine.com.zone: file not found
_default/genuine.com/IN: file not found
I always found it silly that no one really talks about this and apparently many like me and even control panels like Plesk were still using hard paths. I always thought "why can't I just specify the name of the zone file and have bind find it". Surely the default search path must be /var/named or somewhere else but there is no such thing.........
Openvz problem, it is confusing because it's an inode issue and there is enough free space.
cp: cannot create regular file `forums/memberlist.php': Disk quota exceeded
/dev/simfs 60G 20G 41G 33% /
none 2.0G 4.0K 2.0G 1% /dev........
Jan 16 04:02:03 centosbox syslogd 1.4.1: restart.
Jan 16 04:07:34 centosbox kernel: INFO: task updatedb:20771 blocked for more than 300 seconds.
Jan 16 04:07:34 centosbox kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 16 04:07:34 centosbox kernel: updatedb D F78BE050 6476 20771 20766&n........
CPU/Kernel/MB/RAID problem?
Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168]
Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........
php won't work with absolute links
Warning: imagecreatefromgif(/images/header.gif): failed to open stream: No such file or directory in /vhostsdir/httpdocs/images.php on line 15
That is how my path is structured and ONLY likes the true full path as /vhostsdir/httpdocs/images/header.gif
Why can't it work relative to the vhost directory with absolute links just like say an html link would.........
VMWare bridged adapter not working:
Message from system: The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet1.
I'm not sure how to fix this but one of the issues is that my eth0 became eth1 after moving my hard drives to a new motherboard. I have run the vmware-config.pl but this did not resolve the issue.........
Webmin Setup Centos 5:
wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet
[1] 24229
[2] 24230
[root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html
Resolving downloads.sourceforge.net... 216.34.181.........
I can't tell if it's Flash or Javascript that they were using, but it basically caused my sysetm to lockup until I closed that one page. Is this proof enough that Wal-mart is evil?:)
I've never seen that before, it's weird how certain things mask themselves as high CPU usage with Xorg, unless it is some kind of weird Xorg problem but I believe it's more of a Flash/Javascript issue from Firefox in Wal-mart's evil scripting.........
Install the "Editors" and "Net" groups that will give you rsync, ssh, ssh-keygen and cron.
The trickiest thing that I keep forgetting about each time is you have to run "cron-config" which adds the cron service to Windows, and without doing that obviously no cron jobs will be run thus making automatic backups impossible.
Warning about rsync/cygwin and using the -a archive switch.
It's a good thing I caught this because it doesn't work ri........
Login as Admin
Languages & Phrases -> Search in Phrases
Choose "Phrase Variable Name Only"
Search for: welcomemail
Edit the "Translation" box with what you'd like in it.........
Copy the initrd to somewhere else, say /tmp:
mv initrd.img to initrd.gz
*the mv to .gz is needed otherwise gunzip won't work/it will refuse to operate without the correct .gz extension
gunzip initrd.gz
cat initrd | cpio -idmv
The last command extracts the contents of initrd to your present working directory.
For 7z .lz initrd........
I've only used it on Centos, soI thought I'd make a quick Debian guide:
Install the DRBD Package
apt-get install drbd8-utils
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libswfdec-0.8-0
Use 'apt-get autoremove' to remove them.
The following........
I wanted to Import/Use a .vmdk hard disk image file from VMWare. Generally you can just "point" VirtualBox to it and use it and it will work but I found an exception.
One of my Centos 4.4 x64 images wouldn't boot. I had two copies, an older one and the newer one. The older one booted as normal (once I changed the VirtualBox driver to IDE from SATA). The newer one stopped at the "GRUB loading" message no matter what I tried.
As far as........
yum exits in the middle
The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either.
echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk
L........
first container would not come up:
Starting CT 2333:
service vz stop
OpenVZ is locked [FAILED]
2010-11-29T23:26:23-0800 vzctl : CT 2333 : Starting container ...
2010-11-29T23:37:21-08........
hdparm -B 255 /dev/sdb
/dev/sdb:
setting Advanced Power Management level to disabled
HDIO_DRIVE_CMD failed: Input/output error
The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well).
-S set standby (spindown) timeout
hdparm -S 251 /dev/sda
/dev/sda:
setti........
I separated the 2 drives in the RAID 1 array.
1 is the old one /dev/sda and is out of date, while the separated other one /dev/sdc was in another drive and mounted and used with more data (updated).
I wonder how mdadm will handle this:
usb-storage: device scan complete
md: md127 stopped.
md: bind
md: md127: raid array is not clean -- starting background reconstruction
raid1: raid set md127 active with 1 out of 2 m........
Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive.
This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series.
To make it worse this is also when Western Digital introduced "Advanced Format" o........
This is an easy fix and highlights a huge issue again with Linux and Flash still not playing nicely/working as well as Windows yet.
Solution - Go to "about:config" and disable the two entries (set them to false):
dom.ipc.plugins.enabled.libflashplayer.so
dom.ipc.plugins.enabled.libnptest.so........
From a LiveCD or if you're doing something like converting your non-RAID install to mdadm here's how you would chroot properly (you have to mount your proc, sys and dev on the running system/LiveCD to your chroot environment if you want things to work right, especially if you need to run update-initramfs due to a driver change etc..)
*replace "path" with your mount/chroot path
mount -o bind /proc /mnt/path/proc
mount -o bind /dev/ mnt/pa........
I couldn't figure out whyI couldn't install a simple package. This is what's annoying about cutting edge Debian distros, yes we know you support each license on average for 1-2 years but why take down the supporting binary packages and basically disable the older versions?
sudo apt-get install update
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find p........
http://apt.sw.be/redhat/el5/en/i386/test/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmforge-testing. Please verify its path and try again
Notice it is complaining about "rpmforge-testing", just disable it for now:
Solution is to edit the repo:
vi /etc/yum.repos.d/rpmforge-testing.repo........
After an upgrade wine wouldn't open anything, not even the pre-installed notepad.
There are no wine logs and nothing is mentioned in any standard log file about why.
I finally decided to run wine from the shell and see what's going on:
wine client error:0: version mismatch 398/402.
Your wineserver binary was not upgraded correctly,
or you have an older one somewhere in your PATH.
Or maybe the wrong wineserver is still running?........
nautilus-gksu - privilege granting extension for nautilus using gksu
nautilus-sendto - integrates Evolution and Pidgin into the Nautilus file manager
nautilus-share - Nautilus extension to share folder using Samba
nautilus-actions - nautilus extension to configure programs to launch
nautilus-bzr - Bazaar (bzr) integration for nautilus
nautilus-cd-burner - CD Burning front-end for Nautilus
nautilus-clamscan - Antivirus scanning for Nautilus
n........
Just install the following package "nautilus-image-converter" and you will be able to right click any image and convert the size and rotate it.
My only wish is that you could also convert the image type from say tiff to jpg etc...
This is an awesome/handy/feature and great tool to have. This is one way where GNOME/Nautilus excel, the possibilities are endless to simplify and make simple/mundane tasks quicker and more efficient than ever.........
I thought it was a GNOME problem because no matter what styles I applied Nautilus wouldn't change, but it was only Nautilus that wouldn't change/update anymore so I should have known.
The only fix/solutionI knew of other than rebooting is the following:
sudo killall nautilus
I tried closing all instances of nautilus that were visible and it had no effect.
And another thing to remember is that only will appearances/styles/themes not apply to N........
expect script debugging
Add the "-d" switch.
#!/usr/bin/expect
I have a problem writing something to a telnet session:
send: sending "statusn" to { exp6 }
send: sending "quitr" to { exp6 }
write() failed to write anything - will sleep(1) and retry...
The solution for my telnet script was to add the &q........
This really gives me a bad impression of SolusVM.
I tried the "Central Backup" option and it does not warn that your server gets shutdown instantly in order to do the backup!
Further, there is no way to pause or cancel the backup. Thankfully this is a test/small disk usage VPS but what if someone was running something production with a large filesize?
Ihaven't used QuickBackup but hope that isn't the same thing.
Everyone should be vary car........
had trouble trying to revert Ubuntu 10.04 LTS from grub2, won't boot mdraid and did not even install mdadm during the installation!
I have tried moving back to GRUB 0.97
backed up original /boot and then copied /boot from an old Debian install. Modified device.map and menu.lst and put the appropriate kernels and initrd for Ubuntu back in /boot
I ran grub:
root (hd0,1)
grub> setup (hd0)
Checking if "/boot/grub/stage1........
2010:09:09-22:22:11: The ip of this machine (xx.xx.xx.xx) does not match the ip in the license file.
Check the value of your ethernet_dev=venet0:0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifconfig
Solution
/usr/local/directadmin/scripts/getLicense.sh........
cd /usr/local/directadmin/scripts/
scripts]# ./awstats.sh
--23:49:28-- http://files.directadmin.com/services/all/awstats/awstats-6.9.tar.gz
Resolving files.directadmin.com... 72.35.85.222
Connecting to files.directadmin.com|72.35.85.222|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1125906 (1.1M) [application/x-gzip]
Saving to: `/usr/local/directadmin/scripts/packages/awstats-6.9.tar.gz'
100%[=........
cd /etc/yum.repos.d
wget http://download.openvz.org/openvz.repo
rpm --import http://download.openvz.org/RPM-GPG-Key-OpenVZ
yum install ovz-kernel-PAE
Now remember to set /etc/sysctl.conf to "net.ipv4.ip_forward = 1"
You can apply the change immediately by running sysctl -w net.ipv4.ip_forward = 1 but remember that you still have to set sysctl.conf
sysctl -p will load and apply any changes to s........
Remember to replace "eth0" with your NIC device although usually it will be eth0.
Replace 192.168.1.1 with your default gateway, remember you can also add multiple gateways by adding a second/different default gateway.
route
Kernel IP routing table
Destination Gateway Genmask&nb........
/usr/local/cpanel/bin/swapip domain(s)
It simply doesn't work, the Apache VHOSTS remain 100% unchanged, why does this script exist? I'm sure it would work from the control panel but I am locked out because my IP was changed and it doesn't match the CPanel license. I wish CPanel would make it easier to update the license IP.
I even took it a step farther, I manually edited the vhosts and restarted Apache and it........
Virtualbox Error
I tried to copy a .vdi of one container to use in another one, basically to clone instead of having to install the OS again.
Failed to start the virtual machine Centos 5.5 Mirror.
Medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' is not accessible. UUID {a1a9fad7-0402-4867-b8f3-39fb49454bc5} of the medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' does not match the value {4945a0e8-0ed5-4736-9088-bcaf........
wget http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm
rpm -i http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm
error: Failed dependencies:
libGLU.so.1 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386
libSDL-1.2.so.0 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386
libXmu.so.6 is needed b........
I can't believe it comes without any sort of stats built-in and they don't make it easy to find out how to integrate it.
I downloaded the following:
wget -O /usr/bin/webalizer http://files.directadmin.com/services/es_5.3/webalizer
chmod 755 /usr/bin/webalizer
echo "action=tally&value=all" >> /usr/local/directadmin/data/task.queue........
I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD.
Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer).
I'll........
catdoc.i386 : Decodes MS Word files into plain text or TeX format
I haven't figured out how to use it, it is really not clear or obvious but it should do the job if you can figure it out.
Usage:
catdoc [-vu8btawxlV] [-m number] [-s charset] [-d charset] [ -f format] files........
[27969.398749] sd 5:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
[27969.398749] sd 5:0:0:0: [sdb] Write Protect is off
[27969.398749] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[27969.398749] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[27972.117543] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[27972.117543] ata6.00: irq_stat 0x48000000
[27972.117543] ata6.00: cmd 60/08:00:ff:7........
I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project.
Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is.
I just want to a directory that had the MP3's I wanted t........
This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason?
[655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........
http://www.tomshardware.com/news/RAID-5-Doomed-2009,6525.html
I found this article interesting, it basically says that with 2TB hard drives or larger sizes, you are more likely to encounter an unrecoverable read error. But is this just another Y2K doomsday? Don't HDD's have enough advanced hardware ECC error and read recovery to prevent this from happening?
I'm almost tempted to build a 3 x........
Here is a RAID 1 partition (500GB Seagate & 2TB WD):
Sequential Reads
File Blk Num Avg Maximum Lat%&nbs........
This is a great way to use your ftp server space, for example on your web hosting account (althoughI believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect. Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc..
Name
curlftpfs - mount a ftp host as a local directory
Synopsis........
My XBOX's dashboard/firmware was from sometime in 2008 when I first bought the system. I mainly played using composite cables but at my brother in law's house we used HDMI. The very first time it worked, but then I bought some games that did some update and after that HDMI never worked.
The symptoms besides having on sound is that your XBOX will show PC monitor resolutions but won't have any option to say you have a 720P or 1080P display, this means the XBOX firmware is fa........
I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL.
Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you.
apt-get install rcconf
Reading package lists... Done
Building dependency tree
Reading state information... Done........
I've recently used CPanel on the admin side for the first time and have to say I hate it. Everything from the layout to the functionality screams "hackish". It just lacks so many common sense features and way of working.
I was never 100% impressed with Plesk but the basics were definitely laid out and done in a sensible manner, even though it is made by a Russian company, they definitely thought about how to make a Control Panel.
I have no idea why people........
I wasted a lot of time wondering why I could never find those packages.
Check the /etc/yum.conf file and at the bottom look for the "exclude=" line.
Below is what I found in mine
exclude=apache* httpd* mod_* mysql* MySQL* da_* *ftp* exim* sendmail* php* bind-chroot*
Just remove those entries or uncomment that line and you'll get access to the missing applications.........
Warning: get_browser(): browscap ini directive not set.
Solution is to edit /etc/php.ini
Uncomment this:
[browscap]
browscap = extra/browscap.ini........
One note is to secure MySQL, I don't know for sure but I believe you could login to MySQL remotely with no password during this operation (I'm not sure, maybe it doesn't accept blank passwords but I firewall MySQL port anyway and recommend you do the same).
First edit /etc/my.cf
Under the [mysqld] field add the following line somewhere:
skip-grant-tables
Now restart mysql: service mysql restart or on Debian sty........
Partclone is a great tool that is basically like dd only it does not waste space, it doesn't take the whole partition, yet it does the same thing as dd, only with huge space/cost savings.
Clonezilla uses partclone and is more of an integrated/easy to use suite I guess you could say. I've personally only used partclone but I wish there was an easy way to mount partclone images.
I believe with Clonezilla you can do that, so I will probably give it a shot next time.........
www.antec.outervision.com/index.jsp
I found that wattage/power consumption tool to be very useful, especially when you're worried that you're hitting the Power Supply's limit. You'll see very quickly that different CPU's, Graphics, Cards, HDDS use a wide range of energy. That tool can help you choose a build that won't stress or go over the maximum limits of your Power Supply.........
I successfully created a single RAID 1 partition which includes /boot inside it and my root directory through the Debian installer. It said GRUB installed successfully but when I try booting the OS it seems GRUB can't read anything.
When trying to boot from GRUB
GRUB Loading stage 1.5.
GRUB loading, please wait...
Error 2
I get "Error 2" when trying to boot Debian. I also notice from a LiveCD that........
This function and others may not work with the stock PHPinstall on Centos/CPanel: Fatal error: Call to > undefined function imagecreatefromjpeg()
Even with libjpeg-devel installed it won't work because PHP was not compiled with jpeg support, so we have to do the dirty work ourselves :)
Here is the command/yum's I did to install missing libraries for PHP that configure will complain about (yes it is a one by one process).
yum install bzip2-........
This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel.
OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!)
# # # # # #&n........
The easiest way is if you have a secure way to connect and verify the hostkey of the remote host by using this guide.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOME........
It's not just as simple as running the chroot command, you need to ensure the /proc and /dev entries are passed through and populated to the chroot environment.
Step 1 - Mount Your Off-lineOS
mount /dev/sda1 /mnt
Step 2 - Mount Proc
mount -t proc none /mnt/proc
Step 3 - Mount Dev
Most guides will tell you to use this: mount -o bind /dev /mnt//dev but that doesn't work for some reason in many cases:
mount: wron........
Ihave no idea how to get the loopback device working in OpenVZ, but what's more frustrating is that I purchased a CPanel license for my VPS and clearly it is not "VPS Optimized". Although everything does seem to work at this point despite that error.
The suggestions here: http://forum.openvz.org/index.php?t=msg&goto=1339 don't seem to work at all. This is an OpenVZ issue, but also a CPanel isue, why on earth would loopback support be expected in a VPS a........
I took an educated guess because it kept happening at the same spot when loading the XP install. I thought it was the hard drive or motherboard.
But it turns out my heavily used but loved NEC 3500 DVD-RW drive was the culprit. After disconnecting it and swapping it for another much beloved Pioneer DVD-RW, everything has gone smoothly.
I never ran into this or many issues because I've hardly used this drive since moving it to another Desktop years ago. I actua........
This is a very simple solution, but most guides out there make you login twice (once to scp the key) and once to put the key in authorized_keys. There's no need for that.
If you don't already have a ~/.ssh/id_rsa.pub just type "ssh-keygen -t rsa" and keep hitting enter until it's done :)
Just use this code to easily enable passwordless login with SSHD
key=`cat ~/.ssh/id_rsa.pub`;ssh user@192.168.5.25 "echo $key >> ~/.ssh/auth........
Out of memory: kill process 7559 (rsync) score 635 or a child
Killed process 7559 (rsync)
I was surprised to see this in my dmesg whenmy rsync backup suddenly stalled/stopped.
This system has 3 gigs of RAM and lots of free memory so I don't understand what is happening.
rsync invoked oom-killer: gfp_mask=0x200d2, order=0, oomkilladj=0
Pid: 7600, comm: rsync Not tainted 2.6.24.2 #83
[] oom_kill_pr........
I'm guessing RAM manufacturers forgot they're not the oil/gas companies and are playing games. It was just a year ago when I was buying 2GB sticks as low as $20 CAD! Now the average price is $50 CAD.
What happened to Moore's law when it comes to pricing for RAM? Every other piece of hardware generally has been coming down without exception.
........
Apr 30 17:07:07 localhost kernel: [12265558.582378] r8169: eth0: link up
Apr 30 17:07:07 localhost NetworkManager: (eth0): carrier now ON (device state 1)
Apr 30 17:07:08 localhost kernel: [12265559.237961] r8169: eth0: link down
Apr 30 17:07:08 localhost NetworkManager: (eth0): carrier now OFF (device state 1)
Apr 30 17:07:11 localhost NetworkManager: (eth0): carrier now ON (device state 1)
Apr........
This is what the /var/log/cups/error.log says after my Samsung CLP-310N decided to stop printing. This is a new printer that replaced my CLP-300 and it has been working for a day so far.
What happened is that I lifted the top part (not realizing there were rollers on it) and it stopped printing. The network activity light was flashing ,hitting the stop button didn't do anything. Even powering the printer on and off did not help.
I have restarted CUPS and SMB on the........
This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART.
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device........
Seagate Inventory/Firmware Check
I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate.
*Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate!
Seagate Inventory/Firm........
From the package "parted" you can use the command "partprobe" to re-read the partition table. I really hate rebooting, and that's what Iloved to hear about AHCI motherboards, that they allow hotswap so you don't have to reboot. But that's only as good as the OS, if the OS does not reload the partition table you won't be able to do anything with that new drive you attached without rebooting. Yes, even without re-reading the partiton table Linux will........
The binary "iostat" comes from the package "sysstat" and is available on all Linux/Unix like platforms.
Use the "-m" option to give you what you probably want, which is to see in MB/s how much bandwidth each disk is doing.
iostat -m
Linux 2.6.24.2 ((none)) 04/16/10
avg-cpu: %user %nice %system %iowait %steal %idle
........
I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB!
I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition.
Here is what tune2fs tol........
I'm really starting to love ImageMagick, I've used it to mass convert/resize family photos with scripts and all kinds of handy things.
Today I just learned that you can create PDF files with it too, say if you have images scanned or anything else it's very simple:
convert *.jpeg output.pdf
You can replace jpg with whatever format your files are in. One thing to remember is that you can specify the order that the images/pages are added to the PDF manu........
It's basically free bash shell script available from: http://wpkg.org/email2fax/index.php/Main_Page
Make sure you have the required tools:
libtiff
ghostscript
mpack/munpack
Where you can e-mail your Asterisk box and it will fax it to the phone number in the subject line. The good news ends there, it is fairly undocumented and buggy.
Take for example how the documentation mentions you can invoke from the com........
In Debian based distros:
apt-get install jabber
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
fakeroot dkms
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
jabber-common
The following NEW packag........
I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find.
yum search ftp
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirrors.netdna.com
* updates: updates.interworx.info
* addons: yum.singlehop.com
* extras: mirrors.netdna.com
rpmforge........
Proxmox has made this free utility to backup running OpenVZ containers. It's a great program which is actually just a PERL script but gets the job done. This program is not 100% required because all it really does is cp -a from your container's path as far as I know but it is still good to have uniformity to how you backup your containers.
For RPM distros such as Centos/RHEL/Fedora etc.. download and install this:
wget http://www.proxmox.com/cms_proxm........
Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics.
# # # # # # # ##### ###### # # #### # #
# # ## # # # #&nb........
I thought I was being smart, I wanted to download some Debian packages so I went to /var/cache/apt/archives and did "rm -rf *" but then I couldn't use apt-get anymore. I kept getting this error:
E: Archive directory /var/cache/apt/archives/partial is missing.
E: The list of sources could not be read.
The solution was to recreate the "partial" directory inside /var/cache/apt/archives and then everything will be fine.........
heartbeat is stopped for some reason
Anyway hnode2 was active and the services are running fine but I see heartbeat has been stopped somehow.
Here is the last log I see of heartbeat:
[quote:23c84415f5]
Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: MSG stats: 9/1762471 ms age 0 [pid16738/MST_CONTROL]
Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: cl_malloc stats: 716/51784021 152624/74519 [pid16738/MST_CONTROL]
Sep 9 17:15:32........
PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist:
[code:1:1fd0f3abbe]
if (!file_exists($OPENSSL)) {
//echo "ERROR: OPENSSL $OPENSSL not foundn";
}[/code:1:1fd0f3abbe]
I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
Javascript Get a specified element using getElementById()Great, it produces the value for whatever "id" is passed to the function.
http://www.java2s.com/Code/JavaScript/Development/GetaspecifiedelementusinggetElementById.htm
[code:1:1287ede953]
function getElement(){
var x=document.getElementById("myHead........
JavasScript how to set or write value in id tagbla
I need to set a value inside that DIV tag using Javascript, how would I do it?Doesn't work for me:
[quote:c6b5f693a5]Warning: Element referenced by ID/NAME in the global scope. Use W3C standard document.getElementById() instead.
Source File: http://hosting.com/vps-order.html
Line: 19[/quote:c6b5f693a5]
[code:1:c6b5f693a5]........
freebsd-update *Updates binary packages*[code:1:5ea2818369]pkg_add -r freebsd-update[/code:1:5ea2818369]
Great for security updates/patches........
Change default shellJust echo this at your command line (in this case I chose bash since I prefer the bash shell) this way it will be the default when you login again
[code:1:71e2834907]chsh -s bash[/code:1:71e2834907]........
GRUB Boot FreeBSD[code:1:a7050277b7]title FreeBSD 6.0
root (hd0,2,a)
kernel /boot/loader[/code:1:a7050277b7]
Just insert the above code into GRUB's [b:a7050277b7]menu.lst[/b:a7050277b7] and make sure you set the root path correctly.
[quote:a7050277b7]Let's quickly explain what the root (hd0,2,a) means:
*hd0 stands for the primary master drive
*2 stands for partition 3
*a stands for the........
SSH automatic login without passwordlocal> ssh-keygen -t rsa -f .ssh/id_rsa
-t is the encryption type
-f tells where to store the public/private key pairs. In this case, the .ssh directory on home is being used
A password will be asked; leave this part blank, just pressing
Now, go the .ssh directory, and you will find two new files: id_dsa and id_dsa.pub. The last one is the public part. Now, copy the public key to the serv........
Asterisk FreeBSD compile problemsI couldn't get it to compile without using the following options at compile time:
[b:b7d672ee28]
make install WITHOUT_ZAPTEL=YES WITHOUT_MYSQL=YES WITHOUT_FAX=YES WITHOUT_ODBC=YES WITHOUT_H323=YES[/b:b7d672ee28]Some problems you might have with copying over your Linux config files to FreeBSD is different paths.
[b:f044931f41]For example the etc path for Asterisk on BSD will now be:[/b:f044931f41]
[qu........
CREATE Database/Granting PrivilegesCREATE your first database
Code:
[code:1:0668cd8e74]CREATE database myfirstdb;
[/code:1:0668cd8e74]
CREATE a user for your first database
This one creates the user 'sqladmin' and gives them 'usage' on your new database 'myfirstdb'
Code:
[code:1:0668cd8e74]mysql> GRANT usage on myfirstdb.* to sqladmin@localhost;
Query OK, 0 rows affected (0.00 sec)[/code:1:0668........
Centos 4.3 x64 & VMWare Server Beta[code:1:6d0b2c8c2f]
The correct version of one or more libraries needed to run VMware Server may be
missing. This is the output of ldd /usr/bin/vmware:
linux-gate.so.1 => (0xffffe000)
libm.so.6 => /lib/tls/libm.so.6 (0xf7fbd000)
libdl.so.2 => /lib/libdl.so.2 (0xf7fb9000)
libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fa7000)
libX11.so.6 => not f........
Upgrade Release Kernel TipsThis is for CentOS 3.1 to 3.8 but the methodology will apply everywhere.
I ran into a problem first of all with a non-booting system after running
#yum update centos-release
It took me to 3.8 and upgraded all the other packages [b:7e931c835d]BUT[/b:7e931c835d]
because of some stupid flags enabled in /etc/yum.conf the KERNEL WASN'T UPGRADED SO AFTER BOOTING, WELL IT DIDN'T BOOT OF COURSE :)
H........
Updated to Version 3.8 and can't loginSSHD accepts my password but then hangs at "Last login: Wed Sep 13 21:30:02 2006 from"
This occurred during a yum update after upgrading my release, installing the new kernel and rebooting.
I got kicked out of sshd after seeing the following during yum update:
telnet 100 % done 85/476
tux 100 % done 86/476
ntsysv 100 % done 87/476
rpmdb-redhat 94 % done 88/476........
Need identd for port 113 ? Install authdyum install authd
Happy identing :)Actually it's not that simple.
It installs as an "xinetd" service and is disabled and turned off by deafult.
To enable it run:
[code:1:8c94df8319]
chkconfig --level 3 auth on
service xinetd restart
[/code:1:8c94df8319]
This will set identd aka authd to start by default.
service xinetd resta........
Roxio/Sonic complaints - No verification of burnt ISO ImageThe only thing Nero does better is that it has the option to verify the data written from an ISO/CD Image!
Why can't all burning utilities have this feature?........
Updating yum repos for DAG /etc/yum.repos.dIn /etc/yum.repos.d
[quote:96456b2ab9]Create any file such as "CentOS-Dag.repo" in /etc/yum.repos.d[/quote:96456b2ab9]
Add the following to the above file:
[code:1:96456b2ab9]
[dag]
name=Dag RPM Repository For Red Hat Enterprise Linux
baseurl=http://dag.atrpms.net/redhat/el$releasever/en/$basearch/dag/
http://dag.freshrpms.net/redhat/e........
Xorg fonts missing Xorg.0.logThis happened on a PCBSD installation but it could happen on any Unix/Linux Xorg installation:
If the text on your screen is too small and you're running at a high resolution if you do a
[code:1:04ca0d3455]cat /var/log/Xorg.0.log | more
[/code:1:04ca0d3455]
You'll see a bunch of fonts missing, specifically the 75dpi and 100dpi ones that you really need :)
(WW) The directory "/usr/X11........
Quick Tutorial On Starting A Web Site[b:3cef3c01b6]Step 1.[/b:3cef3c01b6] Purchase a Domain Name (eg. yoursite.com)
[b:3cef3c01b6]Step 2.[/b:3cef3c01b6] Design your site using a program such as Microsoft Frontpage or Macromedia Dreamweaver. If you are unable or unfamiliar with doing this you may want to hire a company to create your site (many of them will handle each aspect of setting up your site).
[b:3cef3c01b6]Step 3.[/b:3cef3c01b6] Host your site........
Vonage & Linksys Offer Trade-In ProgramVonage & Linksys Offer Trade-In Program
Monday, June 13 @ 09:22:36 PDT
Vonage is offering customers a way to get a free 802.11g router when they turn in their old one.
advertising
For a limited time, customers can trade-in their used router – any brand, any model – for a Linksys Wireless-G Router with 2 Phone Jacks for broadband telephony (WRTP54G) for free (after rebates), when they si........
The New Chips on the BlockThe New Chips on the Block
By Bruce Gain
Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html
02:00 AM Jun. 13, 2005 PT
We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........
Intel's Finnish FetishIntel's Finnish Fetish
By Dave Mock
June 13, 2005
Chipmaker Intel (NASDAQ: INTC) has successfully topped the personal computer market for decades. Breaking into related areas such as communications has been much difficult for the world's largest semiconductor maker. But a new partnership with Nokia (NYSE: NOK) could help to change that.
Intel's forays into cellular-phone and home-entertaiment-device chips have........
Canada Net SpeedWhat is the fastest internet I can get in Canada?A lot of ISPs offer 10mbit cable such as Cogeco or some other one in Halifax I think. I can't remember the name.
Right now cable internet will offer the fastest.........
Asterisk Agent Login ProblemUsing the AgentCallbackLogin function I couldn't login
I knew I had my agents setup properly in agents.conf so why couldn't I login?
The reason is because agents.conf was missing the [b:994d7a34af][agents][/b:994d7a34af] context!
I just added [agents] above the existing agent declarations and then I was able to login as expected.
It took a lot of figuring out and reading though!........
BMP is the best FreeBSD/Unix MP3 player I can findSeems like a better written XMMS that uses Winamp skins
http://www.sosdg.org/~larne/w/BMP_Homepage........
Trouble connecting between Windows XP and Windows 98 SharesOk a few things to check for:
* Disable all firewalls
* Make sure NetBEUI is enabled on both computers
* Make sure the Windows XP computer has the name of the computer logged in user of Windows 98 added as an XP user
* Add the XP user to anything you want to share
That fixed my problem........
FreeBSD Desktop OSsI would probably choose these over Linux.
In many ways these are probably more stable and just as easy to use as any Linux distros but the benefit of stable, updated and secure packages!
PC-BSD - http://www.pcbsd.org
DesktopBSD - http://www.desktopbsd.net/index.php?id=37
Personally PC-BSD is Beta at this point and is not easy if you are installing it on a non-primary partition.
I have not used Deskt........
PHP imagecreate() not found but compiled with GDHere is what I get:
[code:1:be41bc7717]
Fatal error: Call to undefined function: imagejpeg() in image.php on line 56
[/code:1:be41bc7717]
I am positive it is compiled with GD so I don't get the errorI need to install the linux-jpeg package
then
I need to recompil........
100% disk usage for no apparent reason!I have a full disk and need to find out which files are taking up too much space!........
Bash Script Infohttp://www.faqs.org/docs/Linux-HOWTO/Bash-Prog-Intro-HOWTO.html#ss10.5
http://www.scit.wlv.ac.uk/~jphb/spos/notes/shell/shell5.html
http://quong.best.vwh.net/shellin20/#LtohTOCentry-41
http://www.cactus.org/~dak/shellscript.html
http://db.ilug-bom.org.in/Documentation/abs-guide/
http://pegasus.rutgers.edu/~elflord/unix/bash-tute.html
http://heather.cs.ucdavis.edu/~matloff/UnixAndC/Unix/CShellII.html
Since bash i........
View Disk Space Usage sorted by the sizeUse:
[code:1:8f675c5910]du -h | sort -n[/code:1:8f675c5910]
The -h in du makes it show Kbytes or Mbytes instead of just bytes making it easier to read. The sort -n will show the files in order of smallest to largest
*Note if you specify sort -nr instead then it will show the largest files first.........
Package managementIf you're like me and often like using an older version you'll need to know this.
Since all 5.x versions no longer have packages of their own you'll have to use the 5-stable
The best way is to set the [b:d5e8972240]packagesite environment variable[/b:d5e8972240] like so in your [b:d5e8972240].profile [/b:d5e8972240]file
[quote:d5e8972240]vi /etc/.profile[/quote:d5e8972240]
Add this:
[code:1:d5e897224........
CDR Manufacturers - Why is so much media bad?I have searched for good media and tried many kinds for years. I guess I'll try to summarize my findings and conclusions.
Dye is irrelevant, dye of any color can be good or bad, it more likely depends on the manufacturer.
Speaking of manufacturers, the name at the top of the disc means nothing. For example, Memorex along with any other 'brand' is actually always made by another manufaturer including CMC Mag........
Link Exchanges- Friendly AdviceI just wanted to make aware to the public who are paying to use Link Exchanges to get heavier traffic online and boosting their page rank in Google. Please be advised that this type of 'exchange' can very well get you booted off of Google and blacklisted by them! It's happened to many people and it's a very important tip. If you are on a Link Exchange, and have not been booted off yet; you MAY. Google is very smart and eventually they catch on. ;) Be ca........
Other Security Web SitesSeveral websites actively track security issues. This list provides you with the major providers
of security information on the Web. Many of these organizations also provide newsletters and
mailings to announce changes or security threats:
Center for Education and Research in Information Assurance and Security (CERIAS)
CERIAS is an industry-sponsored center at Purdue University that is focused on technology and
relate........
Clustering LinksI thought this might be interesting for people with spare time.
[b:6423c19973]Great clustering article from Linux Mag[/b:6423c19973]
http://www.linux-mag.com/2003-11/clusters_01.html
[b:6423c19973]General Linux cluster information[/b:6423c19973]
http://www.gdargaud.net/Hack/ClusterNotes.html#HighA
http://www.faqs.org/docs/Linux-HOWTO/Cluster-HOWTO.html#s3
http://www.yolinux.com/TUTORIALS/LinuxClustersAndFileSys........
Google Search Trendshttp://www.google.com/press/zeitgeist.html........
I played around with xmit power (how much power in mW) to see if I could increase the range and signal strength. Idon't think this Linksys WRT54G's strength is the wireless, it seems to have poor signal quality and transfer rates all around.
Ithink part of the problem is also that there are several wireless networks around my house that could be interfering and the walls are thick here.
Anyaway, moving on now :) The default is 28mW and I increased it to........
*This is a bug with initramfs support, all kernels after around 2.6.27.54 suffer from this problem.
If you try to include initramfs into your kernel (I mean actually building your binaries into the kernel) this will always happen. Obviously some code has changed in recent kernels that is present in all new kernels, it makes it impossible to boot
I've tried the latest 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36, 2.6.37, 2.6.38 kernels and they all do this. I found one bug re........
I have played around with Pound a little bit. It is a reverse proxy and load balancer in one, and it can be used as only a reverse proxy if you like. It is very simple to configure as either, and Pound even senses if one of the systems is down and stops sending requests to the dead server.
It supports SSL (but passes the request to the destination server unencrypted) and even the Apache log format. Pound is very simple, fast a........
The "Geoip" package is available on virtually all Linux and Unix like systems and is very handy in looking an IP address' corresponding country.
The homepage of the maintainers is here.
They also have a package called "Geocity" which can be downloaded from their site, it is still free and gives you a close indication of the city the visitor is from. You can........
auth/auth_util.c:make_server_info_sam(840)
User nobody in passdb, but getpwnam() fails!
I never found the solution to this in the web, as usual so Ithought I'd post the fix. In plain English smbd is telling us that the user "nobody" does not exist in /etc/passwd.
You can simply add this to your /etc/passwd file like so:
nobody:x:65534:65534:nobody:/nonexistent:/sbin/nologin
Now SAMBA/smbd should........
Shortcut/Easiest Way To Create A Self-Signed Key:
openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key
Using the above, you instantly create a self-signed certificate valid for 1530 days and you can simply skip to step #5.) below.
If You Need a Real SSLCertificate (eg. Equifax/Openssl) then you need to create a CSR request (you'll need to follow Steps 1.) and 2.) in order to create the CSR. You then upload the CSR Certi........
This happened with a select statement which writes the result to an external file. I didn't remember the privilege "FILE" must be granted on *.* for this to work successfully, it wasn't actually an authentication issue as it implies since I was already in the SQL prompt and doing the query.
SELECT some_id
FROM sometable
INTO OUTFILE '/tmp/result.txt'........
top - 09:34:12 up 2 days, 20:57, 2 users, load average: 1.83, 1.99, 2.03
Tasks: 59 total, 2 running, 57 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.3%us, 0.0%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st
That 99.7% wa is iowait, it means the server is waiting for a process to complete an IOoperation or in plain English, there is a delay in........
I wanted to disable the "Administrator" account for security purposes and Iread some "guide" on the internet that recommended that we run "C:WindowsSystem32sysprepsysprep.exe /generalize". I also clicked the option for "Generalize" and the computer rebooted and gave some OOBE error and restarted, and now I get the error above no matter what.
I read that some drivers such as ones from AVIRA AV can cause this because they're unsign........
I didn't find any useful information that actually fixed this. My VPS was in the "Running State" and I could not stop or restart it. I kept getting "Container already locked" no matter what Idid (I tried all the suggestions in the Google results for this error).
Most of the suggestions were for Windows but I only use Linux. The other solutioins also said to restart the VZ service or even the entire hostnode and this was not acceptable to me........
This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far:
You can purchase an "M-Zone" China Mobile pre-paid SIMCard from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all. At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........
It's a bit of a pain that many basic third party tools that aren't put of the main Centos/RHEL repositories are not available unless you compile them or install the RPMForge Repo.
*Updated 08/29 with new download location changed from apt.sw.be to rpmforge.sw.be
Here's a quick, simple/cut&paste way to do it:
wget http://rpmforge.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.i386.rpm
rpm -i rpmforge........
There is a nice mode that Samba supports which you can add to smb.conf
create mode=555
This way users can create and write files/directories without deleting (except I believe dirs can be deleted but only if there are no files inside).
It's too bad that Linux does not have built-in "write"/"delete" privileges and is something that even Windows 98 can trump.........
I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems.
DRBD
I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........
Loaded plugins: fastestmirror
rpmdb: mmap: No such device
error: db4 error(19) from dbenv->open: No such device
error: cannot open Packages index using db3 - No such device (19)
error: cannot open Packages database in /var/lib/rpm
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py&qu........
Inever saved any of the logs, but basically no matter what OS (Linux)I used, I could not get my 1000GB hard drive to work (Seagate SATA). The BIOS recognizes the drive and fdisk -l shows the hard drive as it should.
The tricky thing is that different OS's will give you different results, but don't be fooled. You can't use these larger drives for long. Iwas getting all kinds of seek/IOerrors and also messages that the port could not be read.........
In those 4 simple commands you can setup mutual key exchange between two sshservers by using a single login shell session and single window.
*Just change the IP address examples of (10.10.0.2) to the target of your mutual key exchange. It doesn't matter if the server is on a LANor WAN(well unless the server is behind a firewall and you cannot SSHinto it).........
In Newer Linux Distros This Way Is Easiest and works on newer versions like Ubuntu, Mint, Fedora, Centos, Debian etc.
#if you are missing timedatectl this in newer distros like Ubuntu/Mint/Debian and are using a container like Docker then do "apt install systemd"
timedatectl set-timezone America/Vancouver
Replace the America/Vancouver with the correct timezone.
To see the list you can just type "timedatectl set........
For some reason Ikeep getting this error when trying to run a sudo command eg:
sudo -u someuser somecommand
sudo: Error dropping capabilities, aborting
My version of sudo is:sudo-1.6.9p17-3.el5_3.1 and I've heard that version 1.7 fixes everything. The only thing is yum does not think sudo has any update. Iguess the new version has not been committed to the RPM repository yet.
This is really a huge and ann........
A VPS Server I had just wasn't working right, code that I migrated there just wasn't working. For example, it kept telling me the connection to the database was unsuccessful, halfway through iterating through results it already had.
Then I realized it wasn't my code. Ichecked my /proc/user_beancounters and found this:
cat /proc/user_beancounters
Version: 2.5
uid resource held maxheld barrier limit failcnt........
Backing MySQL Databases
Backing Up/Dumping All Mysql Databases To A Single File
mysqldump --all-databases -u admin -p > allmysqldatabases.sql
The "-all-databases" clause is pretty obvious isn't it? It means that it will backup all databases.
The "-u admin" means login using the user "admin", if you h........
Here is an example that I recently found, most PR checkers will say this domain is PR8 or will say "cannot analyze PR".
The example is domain "bonserotica.com" view Google's cache of the homepage and you'll see as in the picture below, it lists a different URL, which means they used a redirect to a high PR site to fool you and the PR checkers.........
First of all, the iPhone is crippled in many ways, but most of my complaints about functionality have been addressed through the jailbreak, Ican run apps in the background of my choosing, I can install a terminal, acccess my phone through SSH and SCP and so much more.
It even addresses the 15 minute e-mail problem, I installed a program called "PushMod" and now set the checking time to just 1 minute.
Apple should really thank the developers for this gift, it ma........
Everything was working fine but I believe when Iturned off "EDGE" in Big Boss everythign went haywire, at first my WiFi dropped, then 3G didn't work and I couldn't even make phone calls.
If you're having this trouble with your jailbroken 3GS running 3.0 firmware, make sure you don't turn off EDGE, it seems to disrupt all service to your phone.........
Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore.
A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly.
In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........
Yes, Iadmit I finally got bitten by the hype as much as I can usually see through it all. Keep in mind this review is of the "stock" phone, no jailbreaking yet which is what really unleashes the customizability and whyI bought iPhone.
I had better things to say about this phone before buying it, and it is a great phone, perhaps the best on the market by far, if not because of the Mac OS port onto the iPhone and all the apps, etc, etc.
With that said........
The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso
I'll only cover theLinux version although the Windows pre-built binary works the same way.
Download dmg2iso here for free (from the author's website)
It's just silly and doesn't make sense that Ubuntu doe........
As much of a computer nerd as Iam, I'm usually a late adopter to technology for a few reasons. Ifeel most new hyped technologies and electronics are mainly fads, and I'm also cheap.
Adopting later means you avoid the bugs, kinks and most importantly pay the lowest price, that's me being cheap again :)
I never read much about the iPhone but Isaw all the hype around it and until recently I wasn't a big fan of anything Apple until a few years ago I realize........
I've had an old Blackberry for a few years and I was ready to spend some serious cash on a nice Nokia. I love the idea of the Linux based Symbian S60 OS, so I was looking at phones like the E63, E71 (both are basically the same, at least CPU/screensize although E71 is thinner, has a 3MP camera, has GPS, and has dedicated buttons to adjust the volume).
Then Iheard about the N97 and what a revolution it was supposed to be and it was even compared to iPhone.
To........
genisoimage: Directories too deep for 'Backup/My Documents/My Music/iTunes/Album Artwork/Local/5928CE9C1AFAC465/07/15' (7) max is 6.
Some people said choosing the --iso-level-4 option will help. I just opted to add the "-D" switch and everything was fine.........
This is really something the SSHServer developers should consider. The cause of this annoyance is because of failed DNS lookups on your IPaddress, which is especially common for many dedicated/col-located servers and also computers on internal NAT/private networks.
The chances are this is the cause of your SSHSlow/Delayed Login problems.
The easy solution to SSH Login Problems
Edit /etc/ssh/sshd_config
Add this line to disable r........
When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it.
More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things.
Output of /var/log/messages for OCFS2
Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........
There's a lot of information and guides on OCFS2 for RHELand Centos Linux but the package setup and configuration is slightly different and this has thrown some people off.
Installing OC2FS
You should install the following packages to get started:
apt-get install ocfs2-tools ocfs2console
Configure OC2FS
In RHEL/Centos the main configuration file is located in /etc/sysconfig/o2cb
However in Debian based Linux it is located........
This will give you the basic info needed to browse and connect to Samba shares from the command line. From the GUI of Gnome or KDE etc, it is pretty standard and straight forward. However, I've found very little guides on how to do it from the command line and if you're like me, a nerd who prefers command line for its simplicity and for remote use, this is the way to go.
First get a list of all the Samba/SMB shares on the target.
smbclient -L hostname........
Ithink there has been a lot of negative press towards Rackable Systems. We will give their new solution credit that it is marketed very well, and comes prepackaged and ready to go.
But let's cut through the hype of both sides, the people who love this concept and the people who hate it.
What Rackable Systems have done is a first, to minimize space, power and costs into small servers. This is great, and many companies have already built their own servers based........
((: 08: value too great for base (error token is "08")
Here is the code that caused it for ((track=1;track ........
At this time we can't resolve Enom's website and all DNS requests to their 4 primary name servers are failing, although the hostnames themselves still resolve:
Name Server: DNS1.NAME-SERVICES.COM
Name Server: DNS2.NAME-SERVICES.COM
Name Server: DNS3.NAME-SERVICES.COM
Name Server: DNS4.NAME-SERVICES.COM
Name Server: DNS5.NAME-SERVICES.COM
You would really think Enom, bein........
There's a lot of outdated information and confusion for system administrator's out there.
One annoying task for many an Administrator has been backing up data in Linux. You don't need any GUI tools such as K3B or GnomeBaker. Both are excellent tools but for veteran command line users working remotely, using the keyboard is a great and possibly automated way to save yourself pain and hassle.
At a later date we'll cover how scripting can automatically backup certain........
We've noticed in many ways that traditional networking even in WANs and LANs has changed very little. Years ago most networks were running on 100mbit and today most still are.
Even the average internet connection is largely unchanged from several years ago with some minor exceptions from Europe and Asia.........