flypro EEPROM PLCC32 programmer software error "The device ID does not match, whether to continue operating"

If you get that message it means you have inserted the adapter or device incorrectly.  In my case the adapter needed to be at the rear end of the pins and it caused this message.

Do not ignore this message as it may appear to work but you will get errors and in reality your chip will not be erased or programmed even if it appears like it is working.


Tags:

flypro, eeprom, plcc, programmer, software, operating, inserted, adapter, incorrectly, rear, pins, errors, erased, programmed,

Latest Articles

  • VMWare Pro Workstation Nic Disconnected and No IP Using NAT
  • Linux How To Create A RamDisk
  • mdadm force resync when resync=PENDING solution
  • Proxmox Breaks Storage/LVM Backing If Killing QEMU-IMG
  • Proxmox trying to acquire lock... TASK ERROR: can't lock file '/var/lock/qemu-server/lock-102.conf' - got timeout
  • Debian 9 SSH root password authentication failure password not working problem / solution
  • QEMU / KVM How To Manually Create Basic Virtual Machine VM
  • Linux wlan0 check all wireless clients
  • PHP Issues With Decoding Strange Smart Quotes And Non-Standard ASCII Characters
  • /etc/iproute2/rt_tables default settings file in Linux Centos 6,7 and most other NIX's
  • bind named error solutions named[2169]: error (no valid DS) resolving / error (broken trust chain) resolving / : error (no valid RRSIG) resolving 'com/DS/IN':
  • iptables how to log ALL dropped incoming packets
  • How To Edit Linux Based NM Network Manager Connection Settings Without GUI
  • Linux Disable IPV6 Centos / Debian / Mint Howto
  • Linux use growisofs to burn a larger file on a BD-R / Bluray Disc
  • Linux partprobe/partx cannot access last and 4th partition
  • DRBD Errors Caused By Physical Corruption
  • mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument solution
  • Linux named / bind how to dump, view and clear the cache!
  • Centos 6 / 7 / 8 How To Change Default nameservers in /etc/resolv.conf when using DHCP / dhclient