• Cisco Unified Communications Manager / CUCM IP 8.6,10,12 Install Error Solution


    Install Errors on Version 12: This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5 on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error. *Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install. What really causes this even though you successfully install........
  • Why SMART is not smart at all and doesn't properly predict disk errors that cause a kernel panic or crash


    Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated. It has caused a kernel panic and system crash repeatedly as we can see from the logs. But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector. Any time I have had anything but 0 for that attribute it........
  • *** These critical programs are missing or too old: gawk


    checking whether autoconf works... ../configure: line 5377: 7325 Segmentation fault $AUTOCONF $ACFLAGS configure.in > /dev/null 2>&1 no configure: error: *** These critical programs are missing or too old: gawk *** Check the INSTALL file for required versions. ........
  • VSphere InternalServerError - Error When Adding Permissions


    InternalServerError (com.vmware.vapi.std.errors.internal_server_error) => { messages = [LocalizableMessage (com.vmware.vapi.std.localizable_message) => { id = vapi.bindings.method.impl.unexpected, defaultMessage = Provider method implementation threw unexpected exception: com.vmware.vapi.std.errors.InternalServerError, args = [com.vmware.vapi.std.errors.InternalServerError] }], data = } I was getting the........
  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
  • Linux Mint Black Screen after boot no graphics solution


    This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help. Here is the short end of the stick that fixed it: sudo apt-get install mdm mate-desktop-environment Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........
  • Linux Ubuntu Mint Debian cannot play xvid,x264,mp4 or any videos codec issue - xplayer Could not initialize supporting library.


    In xplayer Iget the following error "Could not initialize supporting library.". It actually looks more like a gstreamer issue. For those wondering what the default video player is called it is "xvid" and not "totem" anymore like previous versions. Basically it looks like some codecs are missing when I uninstalled another program it uninstalled other programs and codecs that it shouldn't have. I've tried installing all the gstre........
  • ffmpeg vidstab to stabilize video


    I'm having trouble making it work on very shaky video the result seems kind of warped/blurry/fish eye like and not as good as some other examples I've seen: ffmpeg -i MVI_1285.MOV -vf vidstabdetect=shakiness=10:accuracy=15 -f null MVI_1285.trf ffmpeg -i MVI_1285.MOV -vf vidstabtransform=smoothing=30:input="transforms.trf" MVI_1285.MOV.mp4 I've played around with the shakiness, accuracy etc.. but not the smoothing part.........
  • vbulletin 4.2.5 after upgrading from 3.6 white screen fatal php errors


    The code may lead you to believe you have an incompatible template but if you are not trying to use an old template currently that is not the issue. I actually deleted all 3.x style templates to make sure. What the issue is, is old plugins that are not compatible but Vbulletin does not seem to account for this except that you'll see a fatal PHPerror. You should disable all plugins and then enable one by one until you find the one that is causing the issue. &........
  • Linux bash script to see what connected computers respond to ping


    A great way when moving your equipment to a new location, new router/switch etc to help confirm what MAC has what IP: for ip in `arp -na|awk '{print $2}'|sed s/(//g|sed s/)//g`; do echo ping $ip ping -c 1 -w 1 $ip > /dev/null if [ "$?" == 0 ]; then echo "$ip UP" fi done........
  • ffmpeg Unable to Use Hardware Encoding with Nvidia 3.40 Driver and GT210 card


    I believe from what I've read that this card's driver doesn't support the features after trying all known troubleshooting methods. ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload -c:v hevc_nvenc -profile main -preset slow -rc vbr_hq -c:a copy uservideoRendered.mp4-test ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload........
  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd ffmpeg-3.3.2/ ./configure --disable-yasm install prefix /usr/local source path ........
  • USB 3.0 PCI x1 Card Review VIA VL805 on Linux Review and Experience


    This is a VIA made VL805 USB 3.0 Chipset with 4-ports and MOLEX powered. First of all this unit was cheap at about only 9 USD with fast shipping. My biggest concern was if this was a quality unit and would it really give you full USB 3.0 speeds (some people reported with similar cards that for some weird r........
  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........
  • How to verify SSL SHA-1 Certificate Fingerprnit Signature of your mail/web server to avoid hijacking/man-in-the-middle attacks


    This is especially helpful if you run your own servers. If you are presented with an error message or warning that the signature has changed or does not match the IP/domain you are connecting to you always want to verify manually. So your e-mail/web client will show you an SHA-1 fingerprint like this: "Could not verify this certificate because the issuer is unkown" or other reasons such as a mismatch in IP/domain. It will also show you........
  • mdadm frozen and doesn't realize array is dead/missing failed due to unplugged drives


    This was a surprising bug but I unplugged all drives for an array md127. At first it was just 1 drive and mdadm seemed to notice this. I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it. This created problems trying to unmount it or even to stop this array with mdadm freezing. As for how to fix it I can only think of making sure you are not in a mounted path of........
  • How to Properly Secure SSL/TLS Apache Settings against Heartbleed Poodle (TLS) Poodle (SSLv3) FREAK BEAST CRIME


    Many users still are not aware but simply patching OpenSSL does not secure you against many known and easy to exploit attacks that will render your encryption useless by an attacker. Use the following setings in /etc/httpd/conf.d/ssl.conf SSLCipherSuite "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH EDH+aRSA !CAMELLIA !SEED !3DES !RC4 !aNULL !eNULL !LOW !MD5 !EXP !PSK !........
  • ADATA SU800 256GB 3D NAND Flash SSD Test & Review


    I keep reading these drives are slower, but they are cheap and still SSDand work very fast for my needs. As you can see the sequential read is 481-491MB/s, if I put them in MDADM RAID10 mode (normal RAID1) they should give me well over 900MB/s and with redundancy and being very cheap for what they offer. [1232206.315622] scsi 8:0:1:0: Direct-Access ATA ADATA SU800&........
  • mdadm mirrored RAID1 performance using RAID10 -f2 (Far Layout) is the solution


    The only way I've found in mdadm to make 2 drives perform like a proper RAID 1 (eg. the read speed should be 2x that of a single drive) is to use the --layout=f2 (far 2). mdadm raid10 performance issues. Be very aware that mdadm seems to default to layout=n2 (which means near). In this scenario it means it is like mdadm RAID 1 performance (you get maximum read speeds of a single drive). dd if=/dev/md126 of=/dev/null bs=1M cou........
  • mysql_real_escape_string returns an empty string solution


    This is a common mistake but many people do not realize this function comes from mysql itself, so therefore you need an active mysql connection open. Usually the string will be empty and null when you call it from outside of the database connection portion of your code. eg. an example of the wrong way and creating a null/empty string $var = mysql_real_escape_string($myself) mysql_connect(); // returns n........
  • Dell Perc 6/i SATA benchmarks without battery


    The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results. This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane. Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: N/A De........
  • How to install GRUB to the MBR of a disk image.


    cat | grub --device-map=/dev/null Now pay close to the attention of the beginning. Type: "device (hd0) VPS.img" this is telling what hd0 will be to GRUB and we're telling it the disk image file "VPS.img" in the current directory is hd0, you can specify alternate paths and image names of course. GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-li........
  • IO/delay and high load when a SATA hard drive dies


    dd if=/dev/sda of=/dev/null creates ever increasing load every second. After minutes the load has moved up to 4.79 I've tried with two different discs in my system. I wonder if it's a delay or problem with the SATA bus because one drive I have connected has recently failed. I notice when drives fail that you get some IO/blocking issue when they don't respond properly. Yes I believe it was, because here's the same disc after removing the dead........
  • Openvz Container IP not working suddenly Solution


    This may not apply to everyone but here is what happened to me. One day my IP connectivity for one container went dead, I could ping the hostnode from it and the hostnode could ping it but there was no external routing. I restarted the network service but it didn't help. I checked the routing table inside the VPS and the host and everything looked normal. Iadded another different IPon the same subnet to the container and it worked. Right away I st........
  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
  • rsync skipping non-regular file


    skipping non-regular file "mnt/lib/udev/devices/console" skipping non-regular file "mnt/lib/udev/devices/kmem" skipping non-regular file "mnt/lib/udev/devices/loop0" skipping non-regular file "mnt/lib/udev/devices/null" skipping non-regular file "mnt/lib/udev/devices/ppp" skipping non-regular file "mnt/lib/udev/devices/net/tu Solution for skipping non-regular file You need the -D........
  • Telus + 2Wire 2700 Router Horrible


    Telus + 2Wire 2700 Router HorribleWell first of all let me say this is the only router/switch that sometimes seems to crash/disconnect computers on the local network. This device also thought it would be smart to block VOIP packets coming from my Sipura ATA VOIP adapters so I disabled the [quote:cb89ba7bff]"Invalid TCP Flag Attacks (NULL/XMAS/Other)"[/quote:cb89ba7bff] option Then all of a sudden I couldn't get onto any web pages, the wireless........
  • Create Table with structure of another existing table


    Create Table with structure of another existing tableOk, this has many valid uses such as if you need to create backups or the ability to undo changes, you would want to create new tables with the same structure as another. Here is how you do it. [i:7ed9581493] Also remember Indexes such as PRIMARY KEYS [b:7ed9581493]will not be preserved[/b:7ed9581493] so you will have to readd them manually.[/i:7ed9581493] [code:1:7ed9581493]CREATE TABLE NewName AS SEL........
  • ADD PRIMARY KEY to Table


    ADD PRIMARY KEY to TableHere is an example of readding a PRIMARY KEY with an AUTO_INCREMENT field: [b:40986c2a8b]First make the field NOT NULL[/b:40986c2a8b] [code:1:40986c2a8b] ALTER TABLE tableName MODIFY FieldNAME INT(18) NOT NULL; [/code:1:40986c2a8b] [b:40986c2a8b]Create The Primary Key[/b:40986c2a8b] [code:1:40986c2a8b]ALTER TABLE tableName ADD CONSTRAINT PRIMARY KEY(FieldName);[/code:1:40986c2a8b........
  • Bash Script Info


    Bash Script Infohttp://www.faqs.org/docs/Linux-HOWTO/Bash-Prog-Intro-HOWTO.html#ss10.5 http://www.scit.wlv.ac.uk/~jphb/spos/notes/shell/shell5.html http://quong.best.vwh.net/shellin20/#LtohTOCentry-41 http://www.cactus.org/~dak/shellscript.html http://db.ilug-bom.org.in/Documentation/abs-guide/ http://pegasus.rutgers.edu/~elflord/unix/bash-tute.html http://heather.cs.ucdavis.edu/~matloff/UnixAndC/Unix/CShellII.html Since bash i........
  • Bash Scripting Variable Scope Using Piped While Loop


    I've been struggling with this for awhile, wondering why all of my variables are null. Ijust realized the variables disappear after leaving this while loop. Note that I'm piping to the while loop which makes a subshell Ibelieve which is the cause of the issue: echo "$accounts"|while read thisline; do somevariable="some value" (( ++counter )) done At all costs you ne........
  • Latest Articles

  • Linux tftp listens on all interfaces and IPs by DEFAULT Security Risk Hole Solution
  • python import docx error
  • Cisco Unified Communications Manager Express Cheatsheet CUCME CME
  • Linux Ubuntu Debian Missing privilege separation directory: /var/run/sshd
  • bash how to count the number of columns or words in a line
  • bash if statement how to test program output without assigning to variable
  • RTNETLINK answers: Network is unreachable
  • Centos 7 how to save iptables rules like Centos 6
  • nfs tuning maximum amount of connections
  • qemu-kvm error "Could not initialize SDL(No available video device) - exiting"
  • Centos 7 tftpd will not work with selinux enabled
  • Debian Ubuntu Mint Howto Create Bridge (br0)
  • How To Control Interface that dhcpd server listens to on Debian based Linux like Mint and Ubuntu
  • LUKS unable to type password to unlock during boot on Debian, Ubuntu and Mint
  • Debian Ubuntu and Linux Mint Broken Kernel After Date - New Extra Module Naming Convention
  • Wordpress overwrites and wipes out custom htaccess rules and changes soluton
  • Apache htaccess and mod_rewrite how to redirect and force all URLs and visitors to the SSL / HTTPS version
  • python 3 pip cannot install mysql module
  • QEMU-KVM won't boot Windows 2016 or 2019 server on an Intel Core i3
  • Virtualbox vbox not starting