Dell Perc 6/i SATA benchmarks without battery

The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard.  However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results.

This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane.

Adapter #0
 

 

Enclosure Device ID: 32
Slot Number: 0
Enclosure position: N/A
Device Id: 0
WWN:
Sequence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA

Raw Size: 931.512 GB [0x74706db0 Sectors]
Non Coerced Size: 931.012 GB [0x74606db0 Sectors]
Coerced Size: 931.0 GB [0x74600000 Sectors]
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: A3MA
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x1221000000000000
Connected Port Number: 0(path0)
Inquiry Data:       JP2940N00N16GDHitachi HDS721010CLA332                 JP4OA3MA
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature : N/A
PI Eligibility:  No
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No



Enclosure Device ID: N/A
Slot Number: 4
Drive's postion: DiskGroup: 1, Span: 0, Arm: 0
Enclosure position: N/A
Device Id: 4
WWN:
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA

Raw Size: 232.885 GB [0x1d1c5970 Sectors]
Non Coerced Size: 232.385 GB [0x1d0c5970 Sectors]
Coerced Size: 232.375 GB [0x1d0c0000 Sectors]
Firmware state: Online, Spun Up
Device Firmware Level: 5.01
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x1221000004000000
Connected Port Number: 4(path0)
Inquiry Data:             5ND2NTQDST3250823NS                             5.01   
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature : N/A
PI Eligibility:  No
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No



Enclosure Device ID: N/A
Slot Number: 5
Drive's postion: DiskGroup: 0, Span: 0, Arm: 0
Enclosure position: N/A
Device Id: 5
WWN:
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA

Raw Size: 232.885 GB [0x1d1c5970 Sectors]
Non Coerced Size: 232.385 GB [0x1d0c5970 Sectors]
Coerced Size: 232.375 GB [0x1d0c0000 Sectors]
Firmware state: Online, Spun Up
Device Firmware Level: 5.01
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x1221000005000000
Connected Port Number: 5(path0)
Inquiry Data:             5ND2NS2GST3250823NS                             5.01   
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature : N/A
PI Eligibility:  No
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No




Exit Code: 0x00
[root@fs12home 2.6.32-042stab079.5]# MegaCli64 -CfgLdAdd -r0 [32:0] -an
Invalid input at or near token -an                                          

Exit Code: 0x01
[root@fs12home 2.6.32-042stab079.5]# MegaCli64 -CfgLdAdd -r0 [32:0] -a0
                                    
Adapter 0: Created VD 2

Adapter 0: Configured the Adapter!!

Exit Code: 0x00

Disk /dev/sdc: 999.7 GB, 999653638144 bytes
255 heads, 63 sectors/track, 121534 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


[root@fs12home 2.6.32-042stab079.5]# dd if=/dev/sdc of=/dev/null bs=1M count=2000
2000+0 records in
2000+0 records out
2097152000 bytes (2.1 GB) copied, 15.0386 s, 139 MB/s
[root@fs12home 2.6.32-042stab079.5]# dd if=/dev/sdc of=/dev/null bs=1M count=5000
5000+0 records in
5000+0 records out
5242880000 bytes (5.2 GB) copied, 37.4384 s, 140 MB/s


Disk /dev/sdc: 1999.8 GB, 1999844147200 bytes
255 heads, 63 sectors/track, 243133 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

[root@fs12home 2.6.32-042stab079.5]# dd if=/dev/sdc of=/dev/null bs=1M count=5000
5000+0 records in
5000+0 records out
5242880000 bytes (5.2 GB) copied, 40.5302 s, 129 MB/s
 


Tags:

dell, perc, sata, benchmarks, batterythe, hitachi, performs, motherboard, tb, toshiba, mb, vs, pci, riser, backplane, adapter, enclosure, slot, wwn, sequence, predictive, seq, pd, gb, db, sectors, coerced, firmware, unconfigured, spun, shield, diagnostics, completion, sas, inquiry, jp, gdhitachi, hds, cla, oa, fde, enable, disable, secured, unsecured, unlocked, ekm, disk, pi, eligibility, formatted, active, linkspeed, flagged, postion, diskgroup, span, online, nd, ntqdst, ns, gst, fs, megacli, cfgldadd, invalid, input, token, vd, configured, dev, sdc, bytes, cylinders, sector, optimal, identifier, dd, null, bs, copied,

Latest Articles

  • Cisco Switches How To Get Of Port Line Status Console Messages
  • Cisco DHCP Snooping Relay Setup Information
  • Cisco Switch Setup Guide Command List
  • Cisco 2960 Switch Reset To Factory Defaults
  • How To Boot Cisco CUCM UCSInstall 8.6, 10, 11 and 12 on KVM/Proxmox
  • VBOX VirtualBox How To Import Raw .img Disk File
  • Windows Server 2012, 2016, 2019 How To Install and Missing Disabled Telnet Client
  • proxmox vm networking breaks when you restart your network on the hostnode
  • Linux ln symlink how to update existing symbolic link
  • Ubuntu 18.04 / Linux Mint 19.1 Cannot Type or Login - solution
  • LUKS Hard Drive Encryption on Linux Mint Ubuntu Debian etc how to mount encrypted hard drive
  • How to use nmap locate other machines/computers/servers on your network using nmap
  • Linux Mint 18.2 Create Config File To Start Application Upon Login
  • Dell Wyse Thin Client BIOS Access Key
  • sudoers file in /etc warning about comments/includes!
  • Centos 7 Reallocate logical volume space to another
  • lvm how to reduce volume size
  • letsencrypt certbot error "Unable to find a virtual host listening on port 80 which is currently needed for Certbot to prove to the CA that you control your domain. Please add a virtual host for port 80."
  • SSH error cannot Forward or Listen "bind: Cannot assign requested address"
  • X11 SSH Linux Forwarding Error