• How to encrypt your SSH private key file id_rsa


    ssh-keygen -p -f /path/to/your/id_rsa Enter new passphrase (empty for no passphrase): After that your rsa private key will be encrypted which is a layer of protection and security in the event that somehow someone acquires your key and tries to access servers that the key is authorized on.........
  • systemd management using systemctl and journalctl to check systemd logs


    systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system. The key commands or arguments you will use with systemctl are the following: Unit Commands: list-units [PATTERN...] List loaded units &nbs........
  • postfix errors fatal: no SASL authentication mechanisms /usr/libexec/postfix/smtpd: bad command startup -- throttling solution


    Jul 3 22:12:17mailserver postfix/smtpd[6195]: fatal: no SASL authentication mechanisms Jul 3 22:12:18mailserver postfix/master[4881]: warning: process /usr/libexec/postfix/smtpd pid 6195 exit status 1 Jul 3 22:12:18mailserver postfix/master[4881]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling This only ever happens in my experience when the authentication method is actually Dovecot. Usually the problem........
  • Wine uninstalled broken on Linux Mint


    Solution: Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt sudo aptitude install wine The following NEW packages will be installed: ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6 wine1.6-amd64{a} wine1.6-i386:i386{a} The following packages will be REMOVED:........
  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........
  • ADATA SU800 256GB 3D NAND Flash SSD Test & Review


    I keep reading these drives are slower, but they are cheap and still SSDand work very fast for my needs. As you can see the sequential read is 481-491MB/s, if I put them in MDADM RAID10 mode (normal RAID1) they should give me well over 900MB/s and with redundancy and being very cheap for what they offer. [1232206.315622] scsi 8:0:1:0: Direct-Access ATA ADATA SU800&........
  • astrachat connection problems in Android 5.01 Lollipop


    I wanted to use Astrachat because it seems to be the only app that has video, pic and file sharing for Jabber butI cannot even connect despite any other client working fine including Xabber and others. astrachat "Oops.. We can't connect to the account that you provide above. Please recheck your account detail". Unfortunately to make it worse there doesn't seem to be any error log or more details about the issue. The jab........
  • Nvidia Linux Card not working due to LSI 9200/SAS2008 IRQ conflict


    At first my BIOS said the card may not work right because there is no more option ROM space. I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly. But it still cannot initialize the card properly(does not work): [ 33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........
  • SAS2008 LSI 9200-E Linux Upgrade Flash Firmware with sas2flash


    Download from here http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9200-8e#downloads sudo Installer_P20_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash -listall LSI Corporation SAS2 Flash Utility Version 20.00.00.00 (2014.09.18) Copyright (c) 2008-2014 LSI Corporation. All rights reserved &nbs........
  • HP XW9400 Motherboard In Desktop Issues


    Fortunately the format is EATX so an EATX case will work and the screw layout is standard. You will need to remove the HEX/TORX screws that are connecting the stock HP standoffs (meant to slide into an HP case). XW9400 Motherboard Issues Size: 12" x 13" Proprietary Power Connector Proprietary CPU Power Connector Proprietary Memory Power Connector Fan connectors are 4 pin so you will need some kind of adapter.........
  • Dell CS24SC Server Info


    Dell CS24SC Info 0000:00:00.0 Host bridge: Intel Corporation 5100 Chipset Memory Controller Hub (rev 90) 0000:00:02.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x8 Port 2-3 (rev 90) 0000:00:03.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 3 (rev 90) 0000:00:04.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x16 Port 4-7 (rev 90) 0000:00:05.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 5 (rev 90)........
  • Dell CS10-F1D Server Info lspci Linux specs


    0000:00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1) 0000:00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) 0000:00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) 0000:00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1) 0000:00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4........
  • Postfix how to secure outgoing authenticated e-mails for privacy and hide the IP address, mailer and other things


    The most common solution is to use the /etc/postfix/header_checks but this is a big problem. Why is header_checks a problem? Because it does it to all mail whether incoming or outgoing and whether authenticated or not. We of course want as much header information for incoming as we can get for many reasons but many organizations want to secure and make their mail clients as secure as possible. I adapted this solution to the client's custom config, they are configur........
  • Dell SAS 6/ir Cards are just LSi 1068E cards


    02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) 03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) Basically these cards are a stripped-down version of Dell Perc 6/i only they (SAS 6/ir) support JBOD. The DellPerc 6/i are basically useless because it doesn't have JBOD support and requires software or BIOS commands to add or remove........
  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........
  • Dell Perc 6/i SATA benchmarks without battery


    The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results. This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane. Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: N/A De........
  • Dell Perc 6/i Restore BIOS/Bricked Solution Guide Howto


    I bricked one of my cards by following a guide from UNRAID. Step #1 from them wipes out the BIOS, but guess what? The step where you restore the BIOS should have been done first, which is sas2flash but no version supports or is able to find my Perc 6/i. So now I'm a bit stuck. I tried using megarec but it's funny that it can wipe the BIOS but can't forcefully reload it: megarec -writesbr 0 mpt2sas.rom Supports 1078 control........
  • Dell Perci 6/i Firmware Upgrade Guide Tutorial


    One thing to remember is that you need MegaCli to do the flashing. You also need the correct file,I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli(they were really the wrong version). I have an external PCI-E Dell 6 Perc/I butI chose images from the 'Integrated" on motherboard version as it was allI could find. They are different, and below is my first time finding success.........
  • Dell Perc 6/i cannot downgrade


    I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally. I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN --2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN Resolvi........
  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
  • pxe-32 tftp open timeout


    pxe-32 tftp open timeout The solution was to enable tftp in xinetd with "chkconfig tftp on". See the troubleshooting below: chkconfig --list NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off&n........
  • SPAMASSASSIN/spamcd solution - spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#2 of 3): Connection timed out


    May 6 08:16:57 devbox spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#2 of 3): Connection timed out May 6 08:17:02 devbox spamc[20214]: connect to spamd on 127.0.0.1 failed, retrying (#1 of 3): Connection timed out spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#3 of 3): Connection timed out First make sure that the spamd service is actually running, this is your spamd (spamassassin server) cannot be reached. In my c........
  • SPAMASSASSIN Enable Pyzor and DCC


    *Remember to restart spamassassin after all of this. DCC wget http://www.dcc-servers.net/dcc/source/dcc.tar.Z tar -zxvf dcc.tar.Z cd dcc-1.3.138/ ./configure;make;make install #enable DCC, uncomment the line that disables it near the top vi /etc/mail/spamassassin/v310.pre pyzor wget http://sourceforge.net/projects/pyzor/files/pyzor/0.5.0/pyzor-0.5.0.tar.gz/down........
  • Enable SPAMASSASSIN on Postfix in 5 minutes


    Centos 5 Postfix and SPAMASSASSIN Tutorial yum install spamassassin chkconfig spamassassin on vi /etc/mail/spamassassin/local.cf ############## #required_hits 5 #report_safe 0 #rewrite_header Subject [SPAM] #5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives require........
  • SPAMASSASSIN Disable OpenWhois RBL (it is dead/defunct/no longer active):


    SPAMASSASSIN Disable OpenWhois RBL (it is dead/defunct/no longer active): You might see this in your headers 2.4 DNS_FROM_OPENWHOIS RBL: Envelope sender listed in bl.open-whois.org comment out this inside /usr/share/spamassassin/72_active.cf ##{ DNS_FROM_OPENWHOIS ifplugin Mail::SpamAssassin::Plugin::DNSEval header DNS_FROM_OPENWHOIS eva........
  • Postfix Enable SSL/TLS with your certificate


    Create Cert & Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key mkdir /etc/mailssl chmod 700 /etc/mailssl cp server.* /etc/mailssl Postfix SSL config Edit /etc/postfix/main.cf: #SSL stuff smtpd_tls_cert_file = /etc/mailssl/server.crt smtpd_tls_key_file = /etc/mailssl/server.key To make smtps w........
  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........
  • Compile PHP 5.3.2 on Centos 5 and CPanel/WHM because of error - Fatal error: Call to > undefined function imagecreatefromjpeg()


    This function and others may not work with the stock PHPinstall on Centos/CPanel: Fatal error: Call to > undefined function imagecreatefromjpeg() Even with libjpeg-devel installed it won't work because PHP was not compiled with jpeg support, so we have to do the dirty work ourselves :) Here is the command/yum's I did to install missing libraries for PHP that configure will complain about (yes it is a one by one process). yum install bzip2-........
  • Linux 2.6.33.3 Kernel Error CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function b


    CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function body not available drivers/message/fusion/mptsas.c:462: sorry, unimplemented: called from here make[3]: *** [drivers/message/fusion/mptsas.o] Error 1 make[2]: *** [drivers/message/fusion] Error 2 mak........
  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
  • Asterisk FreeBSD compile problems


    Asterisk FreeBSD compile problemsI couldn't get it to compile without using the following options at compile time: [b:b7d672ee28] make install WITHOUT_ZAPTEL=YES WITHOUT_MYSQL=YES WITHOUT_FAX=YES WITHOUT_ODBC=YES WITHOUT_H323=YES[/b:b7d672ee28]Some problems you might have with copying over your Linux config files to FreeBSD is different paths. [b:f044931f41]For example the etc path for Asterisk on BSD will now be:[/b:f044931f41] [qu........
  • Latest Articles

  • Linux Ubuntu Cannot Print Large Images
  • Cannot Print PDF Solution and Howto Resize
  • Linux Console Login Screen TTY Change Message
  • Apache Cannot Start Listening Already on 0.0.0.0
  • MySQL Bash Query to pipe input directly without using heredoc trick
  • CentOS 6 and 7 / RHEL Persistent DHCP Solution
  • Debian Ubuntu Mint rc-local service startup error solution rc-local.service: Failed at step EXEC spawning /etc/rc.local: Exec format error
  • MySQL Cheatsheet Guide and Tutorial
  • bash script kill whois or other command that is running for too long
  • Linux tftp listens on all interfaces and IPs by DEFAULT Security Risk Hole Solution
  • python import docx error
  • Cisco Unified Communications Manager Express Cheatsheet CUCME CME
  • Linux Ubuntu Debian Missing privilege separation directory: /var/run/sshd
  • bash how to count the number of columns or words in a line
  • bash if statement how to test program output without assigning to variable
  • RTNETLINK answers: Network is unreachable
  • Centos 7 how to save iptables rules like Centos 6
  • nfs tuning maximum amount of connections
  • qemu-kvm error "Could not initialize SDL(No available video device) - exiting"
  • Centos 7 tftpd will not work with selinux enabled