SAS2008 LSI 9200-E Linux Upgrade Flash Firmware with sas2flash

Download from here http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9200-8e#downloads

 

sudo Installer_P20_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash -listall
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved

    Adapter Selected is a LSI SAS: SAS2008(B2)  

Num   Ctlr            FW Ver        NVDATA        x86-BIOS         PCI Addr
----------------------------------------------------------------------------

0  SAS2008(B2)     17.00.01.00    11.00.00.06    07.33.00.00     00:05:00:00

    Finished Processing Commands Successfully.
    Exiting SAS2Flash.



sudo Installer_P20_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash -f UEFI_BSD_P20/uefi_bsd_rel/x64sas2.rom
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved

    Adapter Selected is a LSI SAS: SAS2008(B2)  

    Executing Operation: Flash Firmware Image

        ERROR: Firmware Image does not have a Valid Signature.

        Firmware Image Validation Failed!

    Due to error remaining commands will not be executed.
    Unable to Process Commands.
    Exiting SAS2Flash.
 


Tags:

sas, lsi, linux, upgrade, firmware, flashdownload, http, www, avagotech, products, server, adapters, downloads, sudo, installer_p, _for_linux, flash_linux_i, _x, _rel, listall, corporation, utility, copyright, reserved, adapter, selected, num, ctlr, fw, ver, nvdata, bios, pci, addr, processing, commands, successfully, exiting, uefi_bsd_p, uefi_bsd_rel, rom, executing, valid, validation, remaining, executed, unable,

Latest Articles

  • Linux Bash Script To List All Connected IPs and their network name
  • Cisco Switches How To Get Of Port Line Status Console Messages
  • Cisco DHCP Snooping Relay Setup Information
  • Cisco Switch Setup Guide Command List
  • Cisco 2960 Switch Reset To Factory Defaults
  • How To Boot Cisco CUCM UCSInstall 8.6, 10, 11 and 12 on KVM/Proxmox
  • VBOX VirtualBox How To Import Raw .img Disk File
  • Windows Server 2012, 2016, 2019 How To Install and Missing Disabled Telnet Client
  • proxmox vm networking breaks when you restart your network on the hostnode
  • Linux ln symlink how to update existing symbolic link
  • Ubuntu 18.04 / Linux Mint 19.1 Cannot Type or Login - solution
  • LUKS Hard Drive Encryption on Linux Mint Ubuntu Debian etc how to mount encrypted hard drive
  • How to use nmap locate other machines/computers/servers on your network using nmap
  • Linux Mint 18.2 Create Config File To Start Application Upon Login
  • Dell Wyse Thin Client BIOS Access Key
  • sudoers file in /etc warning about comments/includes!
  • Centos 7 Reallocate logical volume space to another
  • lvm how to reduce volume size
  • letsencrypt certbot error "Unable to find a virtual host listening on port 80 which is currently needed for Certbot to prove to the CA that you control your domain. Please add a virtual host for port 80."
  • SSH error cannot Forward or Listen "bind: Cannot assign requested address"