1. Let's work from an environment where we can install Ansible on.
Requirements: A Linux machine (eg. VM whether in the Cloud or a local VM on Vbox/VMWare/Proxmox) that you can easily install Anisble on (eg. Debian/Ubuntu/Mint). The VM requires proper/working internet between the Ansible Controller and to the internet.
This will be on our "controller" / source machine which is where we deploy the Ansible Playbooks (.yaml) files from.........
httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load modules/libphp5.so into server: /lib64/libresolv.so.2: symbol __h_errno, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference
This is usually caused by a mismatch in OpenSSLversion. Interestingly enough a lot of times if it has happened during an update of your system, or after, usually just restarting httpd........
This is not about using ssh as a proxy, but rather, using a proxy when you are SSHing to another host and using ProxyCommand (where we normally use nc as our proxy tool).
In newer versions of nc the syntax has changed to the following:
ssh -o ProxyCommand="nc -x 127.0.0.1:1234" %h %p user@host
The format must be like above in newer nc versions.
Just be sure to change the 1234 to the port of your SOC........
This happened in a PHPscript with heredoc but it could really happen anywhere. The issue was whitespace in code like this:
$variable = ........
Starting httpd: httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/httpd/modules/libphp5.so: cannot open shared object file: No such file or directory
This is basically caused by the PHPmodule specified in php.conf being non existent. The error tells us it couldn't fnd /etc/httpd/modules/libphp5.so........
SyntaxError: Missing parentheses in call to 'print'
This is an annoying issue where the syntax betweenPython 2 and 3 changed which breaks old scripts.
#mount the VCSA DVD
mount /dev/sr0 /mnt/cd
#alternatively you could mount the iso directly
mount -o loop vcsa.iso /your/mount/path
#for this purpose we are using the CLI installer on Linux
#no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file
Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
Stopping httpd: [ OK ]
Starting httpd: httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/h........
I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us
yum install automake curl openssl-devel libcurl-devel gcc gcc-c++
yum -y install kernel-devel-`uname -r`
yum -y install unzip
The solution is simple this happens if you don't meet the requirements. In my case PHP 5.4 was required but I had PHP 5.3 installed. Once I installed a newer version the install of PHPBB was successful.........
[Thu Jan 26 14:13:31 2017] [notice] caught SIGTERM, shutting down
[Thu Jan 26 14:14:00 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jan 26 14:14:00 2017] [error] Server certificate is expired: 'Server-Cert'
[Thu Jan 26 14:14:00 2017] [notice] SSL FIPS mode disabled
[Thu Jan 26 14:14:07 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jan 26 14:14:07 2017] [error] Server certificate is expired: 'Server-Ce........
Usage: geoiplookup [-h] [-?] [-d custom_dir] [-f custom_file] [-v] [-i] [-l]
Usage: geoiplookup [-h] [-?] [-d custom_dir] [-f custom_file] [-v] [-i] [-l]
grep: Address: No such file or directory
grep: not: No such file or directory
grep: found: No such file or directory
sh: -c: line 1: syntax error near unexpected token `|'
sh: -c: line 1: `|cut -d ',' -f 2'
Stopping httpd: [FAILED]
Starting httpd: httpd: Syntax error on line 73 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared obje........
Usually just modify the .spec file to resolve this:
Change "Copyright: GPL" to "License: GPL" and try again.........
root@hkhosting [/]# service httpd start
Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf:
Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration
It's not as simple as "yum install" as you can see below and it doesn't stop there.
yum install php53
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: mirror.us.leaseweb.net
* extras: centos.mirror.rafal.ca
* updates: centos.mirror.nexicom.net
* base: centos.mirror.nexicom.net
* addons: centos.mirror.nexicom.net
Setting up Install Process........
At first it was configured as a RAID 0, then I deleted the Virtual Disk Group.
I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing.
To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
If you move your hard drive(s) around to other computers/servers, you'll find that your eth0 keeps getting higher, the first time it will become eth1 and then eth2 etc and even higher if your server has dual or quad NICs. The reason is that udevd basically assigns eth0 tot he first NIC it finds and remembers it, if it encounters a NIC with a differentMAC, it assigns it one higher (eg. eth1).
See the example below, I have eth2 now so how doI fix it?........
Within vi if you can't exit /etc/vim/vimrc you can type
And to turn it back on:
Many of us have a dark/black background in our terminal/shell making the default syntax unreadable, the solution is to either turn off syntax highlighting with :syntax off or to enable a special option in /etc/vim/vimrc
The "syntax on" enables the highligh........
If you have a webserver and find you have high IO/lagginess MySQL is one of the first things to check. It turns out MySQL was my problem and it was creating a high load on my server, especially for IO.
How to Enable MySQL Slow Query Logging To Find Slow Performance/Queries
Add this anywhere under [mysqld]
log-slow-queries = /var/log/mysql/mysqlslowqueries.log
long_query_time = 1........
This is a great way to reduce MySQL code/mistakes/annoyance when doing things, take for example this statement:
INSERT IGNORE INTO sometable(CatName) VALUES("someitem");
Notice the "IGNORE", that is what does the magic.
Normally if the entry "someitem" existed you'd get an error message back such as "Duplicate entry for whatever". What I have normally done in PHP or whatever language is manually coded or made a........
You can find it for free at http://nginx.org/ I find nginx is simpler to setup than pound (it's not hard but I found it unintuitive and annoying), it seemed to make some basic setups overly complicated with the config file syntax.
nginx on the other hand is perfectly suited in everyway, it is even simpler to setup and seems to be the most stable and most efficient any load balancer. I would go as far as to say that a good nginx setup is more relia........
MySQL Reserved Wordshttp://dev.mysql.com/doc/mysql/en/reserved-words.html
You should familiarize yourself with these because you will have unexpected results if you use any of them.
Eg. try creating a table with what you think is valid syntax like this:
CREATE Table Order(
The word 'Order' is a reserved word and used to ORDER the results so you will get a syntax error from this one and you would think everything is........
PHPBB Drop All TablesSQL Syntax:
[quote:75acd496c1]drop table phpbb_auth_access, phpbb_banlist, phpbb_categories, phpbb_config, phpbb_confirm, phpbb_disallow, phpbb_forum_prune, phpbb_forums, phpbb_groups, phpbb_posts, phpbb_posts_text, phpbb_privmsgs, phpbb_privmsgs_text, phpbb_ranks, phpbb_search_results, phpbb_search_wordlist, phpbb_search_wordmatch, phpbb_sessions, phpbb_smilies, phpbb_themes, phpbb_themes_name, phpbb_topics, phpbb_topics_watch, phpbb_user_group, p........
MySQL SubQueryI was trying to do a sub-query here but it wouldn't work (Syntax Error) in MySQL for some reason even though based on the SQL standards it should be ok.
[i:1268bfa39e][b:1268bfa39e]I found the reason this doesn't work. I am using MySQL 3.23 and I read on the MySQL web site that versions before 4.1 DO NOT SUPPORT SUB-QUERIES so it showed me how to rewrite the following as a LEFT join instead of a sub-query.