Linux wlan0 check all wireless clients

iw dev wlan0 station dump 

This is very useful because it is helpful if you are running something like hostapd and need to see the signal strength and negotiated connection speed.


Station ff:ff:ff:ff:ff:ff (on wlan0)
    inactive time:    16309 ms
    rx bytes:    25451
    rx packets:    325
    tx bytes:    44381
    tx packets:    159
    tx retries:    0
    tx failed:    0
    signal:      -72 [-72] dBm
    signal avg:    -72 [-72] dBm
    tx bitrate:    150.0 MBit/s MCS 7 40MHz short GI
    rx bitrate:    1.0 MBit/s
    authorized:    yes
    authenticated:    yes
    preamble:    long
    WMM/WME:    yes
    MFP:        no
    TDLS peer:    no
Station ff:ff:ff:ff:ff:ff (on wlan0)
    inactive time:    12223 ms
    rx bytes:    1206073
    rx packets:    8835
    tx bytes:    18597457
    tx packets:    14004
    tx retries:    0
    tx failed:    0
    signal:      -69 [-69] dBm
    signal avg:    -62 [-62] dBm
    tx bitrate:    150.0 MBit/s MCS 7 40MHz short GI
    rx bitrate:    6.0 MBit/s
    authorized:    yes
    authenticated:    yes
    preamble:    long
    WMM/WME:    yes
    MFP:        no
    TDLS peer:    no
Station ff:ff:ff:ff:ff:ff (on wlan0)
    inactive time:    406 ms
    rx bytes:    297303650
    rx packets:    213207
    tx bytes:    72276773
    tx packets:    150172
    tx retries:    0
    tx failed:    0
    signal:      -79 [-79] dBm
    signal avg:    -78 [-78] dBm
    tx bitrate:    15.0 MBit/s MCS 0 40MHz short GI
    rx bitrate:    45.0 MBit/s MCS 2 40MHz short GI
    authorized:    yes
    authenticated:    yes
    preamble:    short
    WMM/WME:    yes
    MFP:        no
    TDLS peer:    no


Tags:

linux, wlan, wireless, clientsiw, dev, hostapd, negotiated, ff, inactive, rx, bytes, packets, tx, retries, dbm, avg, bitrate, mbit, mcs, mhz, gi, authorized, authenticated, preamble, wmm, wme, mfp, tdls, peer,

Latest Articles

  • Cisco Switches How To Get Of Port Line Status Console Messages
  • Cisco DHCP Snooping Relay Setup Information
  • Cisco Switch Setup Guide Command List
  • Cisco 2960 Switch Reset To Factory Defaults
  • How To Boot Cisco CUCM UCSInstall 8.6, 10, 11 and 12 on KVM/Proxmox
  • VBOX VirtualBox How To Import Raw .img Disk File
  • Windows Server 2012, 2016, 2019 How To Install and Missing Disabled Telnet Client
  • proxmox vm networking breaks when you restart your network on the hostnode
  • Linux ln symlink how to update existing symbolic link
  • Ubuntu 18.04 / Linux Mint 19.1 Cannot Type or Login - solution
  • LUKS Hard Drive Encryption on Linux Mint Ubuntu Debian etc how to mount encrypted hard drive
  • How to use nmap locate other machines/computers/servers on your network using nmap
  • Linux Mint 18.2 Create Config File To Start Application Upon Login
  • Dell Wyse Thin Client BIOS Access Key
  • sudoers file in /etc warning about comments/includes!
  • Centos 7 Reallocate logical volume space to another
  • lvm how to reduce volume size
  • letsencrypt certbot error "Unable to find a virtual host listening on port 80 which is currently needed for Certbot to prove to the CA that you control your domain. Please add a virtual host for port 80."
  • SSH error cannot Forward or Listen "bind: Cannot assign requested address"
  • X11 SSH Linux Forwarding Error