• How To Boot Cisco CUCM UCSInstall 8.6, 10, 11 and 12 on KVM/Proxmox


    The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported. Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........
  • Dell CS24-NV7 lspci dmidecode info


    0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2) 0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3) 0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3) 0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1) 0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2) 0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 0000:00:05.1 I........
  • Howto Convert Xen Image to KVM


    #count=10000 makes an image of 10000MB make sure your image is at least the same as your existing dd if=/dev/zero of=yourimage.img bs=1M count=10000 # losetup -fv newimage.raw # fdisk -cu /dev/loop0 # kpartx -a /dev/loop0 # dd if= of=/dev/mapper/loop0p1 # e2fsck -f /dev/mapper/loop0p1 # resize2fs /dev/mapper/loop0p1 # a lot of guides tell you to edit /etc/fst........
  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........
  • Centos Solution to "Warning: Unable to open /dev/fd0 read-write (Read-only file system). /dev/fd0 has been opened read-only."


    Warning: Unable to open /dev/fd0 read-write (Read-only file system). /dev/fd0 has been opened read-only. That's a very annoying error, it's simply because Centos for some reason thinks it's wise to load the "floppy" kernel module, who has a floppy drive? I haven't seen or used a floppy for over 12 years! It's more than just annoying, if you probe the drives attached to your system, eg. with grub or partprobe, it keeps trying to locate a flopp........
  • Buffer I/O error on device fd0, logical block 0


    Virtually no system has a floppy disk drive anymore but you will often find your Linux distribution insists that you do or should have one :) The solution is to remove the floppy module and prevent it from loading on the next reboot. rmmod floppy Centos/RHEL echo "blacklist floppy">> /etc/modprobe.d/blacklist #update initramfs so it takes effect dracut........
  • Linux EXT3 16GB-17GB maximum filesize issue solved/how to fix


    I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB! I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition. Here is what tune2fs tol........
  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
  • ECS K7S5A Motherboard System Take Up To 2 Minutes To Boot


    ECS K7S5A Motherboard System Take Up To 2 Minutes To BootHi guys, My motherboard is very strange. Sometimes it will take up to a few minutes to post. I have no idea it suddenly started doing this. I have tried everything and all I can figure is that it is somehow related to the USB ports possibly. Why do I say this? Because if I disconnect my scanner the problem occurs less frequently. I only have a printer hooked up to USB now and by........
  • Nokia N97 review, feedback and complaints


    I've had an old Blackberry for a few years and I was ready to spend some serious cash on a nice Nokia. I love the idea of the Linux based Symbian S60 OS, so I was looking at phones like the E63, E71 (both are basically the same, at least CPU/screensize although E71 is thinner, has a 3MP camera, has GPS, and has dedicated buttons to adjust the volume). Then Iheard about the N97 and what a revolution it was supposed to be and it was even compared to iPhone. To........
  • Latest Articles

  • How to combine .txt ACLs without breaking things
  • How to ping all of Googlebot's IPs script
  • 'virtio0' uses a qcow2 feature which is not supported by this qemu version: QCOW version 3
  • Linux bash script to get the IP of a list of hostnames
  • How To Use Camera Webcam in Docker for OBS Studio etc...
  • Computer Server Won't Post Boot Or Enter BIOS Setup After Installing RAID SAS or GPU Card etc..
  • How To Test PHP Scripts from CLI with GET variables/query string
  • apt-cache how to see all available versions of a package in Debian Ubuntu Mint
  • Virtualbox VBox Guest-utils drag and drop files stops working with Windows VMs
  • How To Remove Ubuntu Netplan and Go Back to /etc/network/interfaces
  • How To Force Flash an AMD Instinct GPU To Another Model Using Debian Ubuntu Mint Linux
  • How To compile ollama from source to use unsupported AMD GPU with rocm in Ubuntu Debian
  • QEMU KVM Virtio GPU Windows Cannot Select 1080P
  • Linux Gnome Desktop Ubuntu Mint Debian Gets Slower After Weeks
  • Firefox How to Save Full Page As Screenshot/PDF
  • Nvidia Datacenter Driver Tesla Slow nvidia-smi response and high utilization with 0 usage
  • ffmpeg how to normalize / increase the volume of your audio
  • kdenlive audio blips pops cracks artifacts solution fix
  • haproxy / nginx certbot SSL issues
  • nginx how to see the real IP when behind a CDN