I'm not sure what caused this as I've never encountered it before.I believe Ubuntu was probably doing some updates and maybe a package like xrandr got updated and the brightness got set very low or maybe the Nvidia driver. Iwas using my computer, left it and came back and thought the monitor was off it was so dark. It also could have been related to a bug or issue with the screensaver/sleep mode when the screen starts to dim before sleeping after X minutes and........

Getting errors like this when burning non-English subtitles? [Parsed_subtitles_0 @ 0x561d3a0b3b80] Glyph 0x6709 not found, selecting one more font for (Sans, 700, 0) [Parsed_subtitles_0 @ 0x561d3a0b3b80] Glyph 0x4E9B not found, selecting one more font for (Sans, 700, 0) [Parsed_subtitles_0 @ 0x561d3a0b3b80] Glyph 0x4EBA not found, selecting one more font for (Sans, 700, 0) [Parsed_subtitles_0 @ 0x561d3a0b3b80] Glyph 0x505A not found, selecting one more fon........

Usually when I come across a system like this, Ijust flash the firmware to an IT mode so we get just an AHCI system with JBOD, but sometimes it is not practical for remote systems or if we fear that flashing is too risky if something goes wrong. In this case, we unfortunately have to use LSI/Broadcom proprietary CLI tools (megacli) to even make the drives visible. Step 1 - Download MegaCLI The official broadcom packages lack .deb packages and only have .rpm for........

The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself. I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all. docker run -it --runtime=nvidia --gpus all ubuntu bash These works for most images li........

1.) Make sure your conf register is 0x2102 Do show version and at the very end of the output you will see the Configuration register. show version Configuration register is 0x2102 If the config register is not 0x2102 then enter this command: r1#configure terminal r1(config)#config-register 0x2102 r1(config)#end 2.) Let's Erase the NVRAM/flash........

It is a bit different and annoying here for these types of routers/models as you need to physically remove the CF (Compact Flash) and only then, will it enter ROMMON mode (Ctrl + Pause remotely over the console will not do it for us). This means you cannot do this remotely, or at least not without the help of a remote/physical helper. Step 1.) Power off, router and remove CF Disk Slot#2 Go to the router and remove the slot#2 cover uses your hand or it may help to use a........

yum -y install wget unzip wget https://download.nextcloud.com/server/releases/nextcloud-18.0.2.zip unzip nextcloud-18.0.2.zip yum -y install php php-mysqlnd php-json php-zip php-dom php-xml php-libxml php-mbstring php-gd mysql mysql-server Last metadata expiration check: 0:58:02 ago on Fri 13 Mar 2020 02:12:49 PM EDT. Dependencies resolved. ===================================================================........

dd is a very handy tool and there are some more practical things we can do. For example if we want to dump a 3TB drive and want to preserve it and only 200GB are being used on the 3TB we can save a lot of space with gzip. Backing Stuff up with dd How to Use dd to backup a raw hard drive and tar gzip at once Change /dev/sda to the drive you want to backup Change /mnt/extras........

You'll have to edit the policy.xml file to fix this: convert -density 300 output.pdf agreement.jpg convert.im6: not authorized `output.pdf' @ error/constitute.c/ReadImage/454. convert.im6: no images defined `agreement.jpg' @ error/convert.c/ConvertImageCommand/3044. sudo vi /etc/ImageMagick*/policy.xml Change policy domain="coder" rights="no........

dvd+rw-mediainfo /dev/sr0 INQUIRY: [ASUS ][BW-16D1HT ][3.00] GET [CURRENT] CONFIGURATION: Mounted Media: 11h, DVD-R Sequential Media ID: RITEKF1&n........

I've never seen this before in all of my years. Ihave some very old CDs and DVDs 12-15 years old that seem not to work in this BD-R/DVD-R/CD-R Asus drive. The discs are fine actually and ironically they even work fine on a normal LG USB based BD-R drive! Here are the errors in Linux: [2914936.884924] attempt to access beyond end of device [2914936.884927] loop1: rw=0, want=730424, limit=688384 [2914954.556873] attempt to........

These errors believe it or not are simply because of not being the root user or running with sudo! However if you didn't know to try as root you'd think there was a problem with your burner or disc Essentially it looks like without root you cannot send the required scsi commands to continue writing. Ithink cdrecord should have built-in tests or safeguards to see if it has the permissions to run the required commands. I guess for more advanced users the idea is simila........

I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........

I've read some people/sources say "the timing must match or it won't work". This is not true at least for the Supermicro boards I've tested this on. Some examples: PC2-5300F-555-12 PC2-5300F-555-11 etc.. Notice the "12" and "11" Also the ones that have a "PC2-5300F-555-11-B0" or "PC2-5300-555-11-D0" are also fine. What happens is what one would expect, the........

sensors|head i5k_amb-isa-0000 Adapter: ISA adapter Ch. 0 DIMM 0:+115.0°C (low = +127.5°C, high = +127.5°C) Ch. 0 DIMM 1: +63.5°C (low = +127.5°C, high = +127.5°C) Ch. 0 DIMM 2: +61.0°C (low = +127.5°C, high = +127.5°C) Ch. 1 DIMM 0: +65.0°C (low = +127.5°C, high = +127.5°C) Ch. 1 DIMM 1: +75.0°C&........

It really is as simple as: cdrecord -v dev=/dev/sr0 pathtoyourisoimage.iso -v is for verbose, I prefer it but if you don't you won't see as much output like below (I like to know the details and exactly what's happening) dev=/dev/sr0 specifies the device name of your burner (they say not to use it and to specify some weird annoying device string but using the raw /dev has always worked for me and is how it should have been implemented from the start IMHO)........

My mother needed a new laptop and I recommended her the same one I would have bought myself or my wife, that means the cheapest possible laptop with the most features for the money. This HP shines at this price point and one thing that made me stay away from buying more and recommending HP/Compaq was the poor battery life. Not anymore, this model has an industry leading up to 4 hours of battery life. Key Factors for Choosing It: HDMI Out........

xmessage "Your message here" -display :0 This will popup a window with the message, it would be cool if it allowed two way communication though. I found the info in this post: http://en.andregondim.eti.br/?p=72........

Importing Plesk 8.6 Backup to Virtualmin: Validating migration file .. .. validation failed : XML::Simple Perl module is not installed Solution is to install the correct module: perl -MCPAN -e 'install XML::Simple' Migrating a single domain works just fine, but it doesn't work with a full client backup containing multiple domains.........

I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project. Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is. I just want to a directory that had the MP3's I wanted t........

PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........