apt install tftpd-hpa
#change TFTP_ADDRESS to by setting address to 192.168.1.1:69 or the IP you need, otherwise it will listen on all IPs and interfaces which could be a security risk.
# edit /etc/default/tftpd-hpa
TFTP_USERNAME="tftp"
TFTP_DIRECTORY="/srv/tftp"
TFTP_ADDRESS="192.168.1.1:69"
TFTP_OPTIONS="--secure"........
find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV"
Africa/Addis_Ababa
Africa/Abidjan
Africa/Blantyre
Africa/Lusaka
Africa/Casablanca
Africa/Libreville
Africa/Asmara
Africa/Bujumbura
Africa/Dakar
Africa/Lagos
Africa/Malabo
Africa/Harare
Africa/Kigali........
Step 1.) Upgrade to Debian 11 first
The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful.
Step 2.) Update sources.list
Update your /etc/apt/sources.list like this:
deb http://........
I've seen this bizarrely happen on a newly partitioned and custom installed Linux install, particularly if you did not properly unmount before rebooting.
You can find reports of it happening on various
How to fix the error: invalid arch-independent ELF magic.
You need to boot into Live/Rescue mode, chroot into your OS properly and then do a grub-install on each drive that nee........
Let's say we have an IP that is dropped by iptables 192.168.20.2
service iptables status|grep 192.168.20.2
184 DROP all -- 192.168.20.2 0.0.0.0/0
You can use iptables itself like this to list the line numbers:
iptables -L --line-numbers
Two Ways To Delete The iptables Rule........
There aren't too many simple guides that show you how to use commands to setup your USB or other drive as a normal bootable drive where you can easily boot custom kernels or whatever OS you would like.
1. Get the tools we need:
We install "syslinux" for MBR and "syslinux-efi" for EFI and "MBR" as we need a tool that embeds the actual MBR into our USB:
sudo apt install syslinux syslinux-efi mbr........
It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc..
wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866
tar -zxvf apcupsd-3.14.14.tar.gz
cd apcupsd-3.14.14
[root@somebox apcupsd-3.14.14]#
./conf........
I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules.
One other weird thing is that sometimes........
The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs.
qemu-kvm command:
/usr/libexec/qemu-kvm -version
QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard
........
yum -y install samba
vi /etc/samba/smb.conf
https://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-6.03.zip
mkdir syslinux;cd syslinux;unzip syslinux-6.03.zip
mkdir -p /tftpboot/libs/
cp bios/com32/modules/linux.c32 /tftpboot/libs/
cp bios/com32/libutil/libutil.c32 /tftpboot/libs/
cp bios/com32/lib/libcom32.c32 /tftpboot/libs/
#add lib path
echo "PATH libs" >> /tftpboot/pxeli........
Thsi is very handy when doing your own kernel development.
-m specifies how much ram (in the example it is 768MB)
-kernel specifies the path to the kernel file
-net tap,ifname=tap1,script=no (the ifname=tap1 is what you need to change and setup manually).
*Run "tunctl -b" to create a tap device and use the one it gives you for ifname=
Enable networking to the outside like this:
*Note we assume that your bridge is br0 i........
./configure
./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc
yum -y install gcc make
./configure
./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc
yum -y install compat-gcc-*
./configure
Error: Could not find alsa
Make sure to have the alsa libs and headers installed.
yum -y install alsa-lib-devel
./configure........
This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel.
I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk.
I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one).
This is strange but it seems like this Xen PV guest has some sort of hidden or........
yum exits in the middle
The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either.
echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk
L........
Seagate Inventory/Firmware Check
I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate.
*Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate!
Seagate Inventory/Firm........
PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist:
[code:1:1fd0f3abbe]
if (!file_exists($OPENSSL)) {
//echo "ERROR: OPENSSL $OPENSSL not foundn";
}[/code:1:1fd0f3abbe]
I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
Bash Script Infohttp://www.faqs.org/docs/Linux-HOWTO/Bash-Prog-Intro-HOWTO.html#ss10.5
http://www.scit.wlv.ac.uk/~jphb/spos/notes/shell/shell5.html
http://quong.best.vwh.net/shellin20/#LtohTOCentry-41
http://www.cactus.org/~dak/shellscript.html
http://db.ilug-bom.org.in/Documentation/abs-guide/
http://pegasus.rutgers.edu/~elflord/unix/bash-tute.html
http://heather.cs.ucdavis.edu/~matloff/UnixAndC/Unix/CShellII.html
Since bash i........