• Save money on bandwidth by disabling reflective rpc queries in Linux CentOS RHEL Ubuntu Debian


    Even today we see a lot of servers that have different services and ports open for rpc and this creates not only potential inward vulnerabilities but perhaps more common, the abuse of your network resources in reflective rpc queries. To stop this problem, you should disable and remove all services relating to rpc or at least block all relevant ports for the service. Surprisingly, there are still some providers and OS installs in Linux that install these services and leave them........
  • ImageMagick error convert solution - convert-im6.q16: cache resources exhausted


    convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244. convert-im6.q16: cache resources exhausted `/tmp/magick-27777Al6FGY7dhyKt10' @ error/cache.c/OpenPixelCache/3984. convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244. convert-im6.q16: cache resources exhausted `/tmp/magick-277772Y_-pJnMdT2r1' @ error/cache.c/OpenPixelCache/3984. convert-im6.q16: Distr........
  • 2024 Buyer's Guide: How to Choose and Buy the Best VPS/VDS for Your Needs - Tips and Strategies


    In today’s digital landscape, finding a reliable and secure Virtual Private Server (VPS) or Virtual Dedicated Server (VDS) goes beyond just comparing specs and prices. With increasing concerns over data privacy, security breaches, and government surveillance, the wisdom of choosing your VPS/VDS provider based on juri........
  • apache2 httpd apache server will not start [pid 22449:tid 139972160445760] AH00052: child pid 23248 exit signal Aborted (6) solution Mint Debian Ubuntu Redhat


    If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing. The above results in this less than obv........
  • Cisco Switch / Router How To Restore Factory Default Settings


    1.) Make sure your conf register is 0x2102 Do show version and at the very end of the output you will see the Configuration register. show version Configuration register is 0x2102 If the config register is not 0x2102 then enter this command: r1#configure terminal r1(config)#config-register 0x2102 r1(config)#end 2.) Let's Erase the NVRAM/flash........
  • Linux Debian Mint Ubuntu How To Add Non-Free Repositories and Contrib


    You just add on "non-free" at the end of each repo, like the example below: If you wanted contributed packages then you could also add "non-free contrib" to each repo line. Don't forget to do an "apt update" to see the new packages, this is especially handy for getting more drivers for devices with the firmware-linux-nonfr........
  • How To Do Linux Network Bonding Teaming in Mint Debian Ubuntu


    Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows. There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........
  • GlusterFS HowTo Tutorial For Distributed Storage in Docker, Kubernetes, LXC, KVM, Proxmox


    This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory. Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage. One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........
  • Proxmox How To Enable Ceph Distributed Storage Cluster with OSD and Pools


    How To Install Ceph If you stopped an install of Ceph midway you will need to manually restart it with "pveceph install" Remember that your VM needs to have working internet (gateway) and DNS in order to connect to the apt repo to download all of the packages that Ceph requires. Remember to repeat these steps for each node that you want Ceph on. ........
  • Windows Cannot Format USB drive Device Media is Write Protected Error Solution


    First of all make sure that you don't have the write-lock or write-protect switch enabled on the SDCard or USB drive. If the above is not the case, then follow these instructions: Solution - Clear Read Only Attribute Hit "Windows Key+R" and enter "cmd" to enter the command prompt: Now type the following :........
  • How To Get Started on Ubuntu with gpt-2 OpenAI Text Prediction


    apt install software-properties-common add-apt-repository ppa:deadsnakes/ppa apt update apt install python3-pip apt install python3.7 curl gnupg python3.7-dev git ln -s /usr/bin/python3.7 /usr/bin/python3 pip3 install numpy keras_preprocessing curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add - echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........
  • CentOS 8 how to convert to a bootable mdadm RAID software array


    The cool thing here is that we only need 1 drive to make a RAID 10 or RAID 1 array, we just tell the Linux mdadm utility that the other drive is "missing" and we can then add our original drive to the array after booting into our new RAID array. Step#1 Install tools we need yum -y install mdadm rsync Step #2 Create your partitions on the drive that will be our RAID array Here I assume it is /dev........
  • mpv / mplayer with Radeon / AMD GPU Video Card Driver enable VDPAU GPU Accelerated Video Decoding


    The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration. Let's manually play with vdpau to make sure it works before we make it permanent: First make sure you have libvdpau installed: sudo apt install vdpau-driver-all If yo........
  • Windows 7,8,10 and Server 2008, 2012, 2016, 2019 Read Only Attribute Won't Go Away


    I have seen this in a few rare cases after a reboot, where all folders and files will have the Read Only Attribute. If you uncheck it, it will just come back. It is more of a filesystem issue in Windows than a configuration issue and it looks like when Windows detects a badly corrupted filesystem that it will make things read-only, sort of like Linux would. If you are Administrator or the owner of the folder and this is happening it is probably due to the reasoning mention........
  • Cisco Unified Communications Manager 12 Install Errors on Proxmox/KVM


    The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs. qemu-kvm command: /usr/libexec/qemu-kvm -version QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard ........
  • Linux use growisofs to burn a larger file on a BD-R / Bluray Disc


    growisofs -Z /dev/sr0 critical.tar.gz.gpg Executing 'genisoimage critical.tar.gz.gpg | builtin_dd of=/dev/sr0 obs=32k seek=0' I: -input-charset not specified, using utf-8 (detected in locale settings) File critical.tar.gz.gpg is larger than 4GiB-1. -allow-limited-size was not specified. There is no way do represent this file size. Aborting. :-( write failed: Input/output error #remember to us........
  • Why SMART is not smart at all and doesn't properly predict disk errors that cause a kernel panic or crash


    Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated. It has caused a kernel panic and system crash repeatedly as we can see from the logs. But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector. Any time I have had anything but 0 for that attribute it........
  • vmkping -I vmk1 10.0.2.69 PING 10.0.2.69 (10.0.2.69): 56 data bytes sendto() failed (Host is down)


    [root@localhost:~] vmkping -I vmk1 10.0.2.69 PING 10.0.2.69 (10.0.2.69): 56 data bytes sendto() failed (Host is down) vsphere distributed switch vmotion not working [root@localhost:~] esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface&........
  • Mozilla Firefox Address Bar History Not Working places.sqlite corruption solution database repair


    Here is the only solution Ifound that works in Firefox: *Note you could basically just copy all of the commands in bold (the rest just shows the output) Install sqlite3 sqlite3 places.sqlite sqlite> .clone places.sqlite-fixed moz_places... done moz_historyvisits... done moz_inputhistory..........
  • Linux how to view video card make and exact model


    Normally lspci will show you just like this and would suggest they are exactly the same card: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) 1c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) lspci -vnn is the answer As we can see one is a Gigabyte and the other is an MSI card. Wha........
  • mdadm and lvm how to completely disable and remove vg/pv/lv


    In short the solution is just to use vgremove for the actual /dev/mapper device: vgremove /dev/mapper/backups-backuplv box mnt # mdadm --manage /dev/md8 --stop mdadm: Cannot get exclusive access to /dev/md8:Perhaps a running process, mounted filesystem or active volume group? box mnt # lv lvchange lvconvert lvcreate l........
  • How to Normalize and Increase the Volume on M4A files in Linux


    M4A is a weird format, so you have to be creative here is a quick copy of what I did. Basically you need to convert to .wav to make use of them and thenI converted the resulting .wav into an mp3 (nice small file size and basically universally playable): ======= sudo apt-get install mpg321 mp3gain faad normalize lame faad "Voice 002 (copy).m4a" faad "Voice 002 (copy).m4a"........
  • cp copy all contents of directory to another one including hidden files and folders howto


    cp -a /your/source/. /your/dest/ -a preserves all file atributes and symlinks the "." at the end of /source/ includes all hidden files such as .htacess, .bash_history, .ssh etc.. The / in /dest/ makes sure the contents go into it instead of replacing /dest itself (eg. if you did not have the / at the end).........
  • PayPal subscriptions automatically cancelling after creation of profile


    There is a weird quirk with how this works, but there is a variable called "src" that defaults to 0 or disabled if not specified as 1. The default 0 means not to recur billing on a subscription.  It's too bad it's not more obvious anywhere nor is there an explanation or warning during payment or after to both the seller and buyer. Here's a proper subscription code example that does recur and does not cancel........
  • The Best NoSQL Solution


    To first start off, there are many misconceptions about NoSQL and especially its strengths and weaknesses. Even the popular NoSQL solution MongoDB is fraught with issues that no one seems to be concerned about aside from a few but there are serious issues with database integrity and verified writes. MySQL was considered dangerous or incomplete at one point without having the transactional safety features of Oracle for example. However the NoSQLimplementations seem........
  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........
  • MySQL Show Print List of Field Names only without other data or attributes


    SELECT column_name FROM information_schema.columns W........
  • WD 20EARX Dead Again


    Another new drive bad from the start: Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC } Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........
  • WD 20EARX 2TB Bad within days


    This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad. ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0 ata1.00: irq_stat 0x40000008 ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/00:00:........
  • Bad Hard Drive Slows Down Computer


    Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........
  • MySQL how to copy/duplicate a table


    CREATE TABLE articles_backup LIKE articles The code above creates a new table called "articles_backup" which has the exact same structure and attributes as the original articles table. CREATE TABLE articles_backup SELECT * FROM articles; The above code does the same thing as the first example, BUT it also copies all of the data.........
  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
  • smart is not smart, it thinks a dead drive is still good


    I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior: === START OF INFORMATION SECTION === Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZ20139 Firmware Version: 50.0AB50 User Capacity: 2,000,398,934,016 bytes Device........
  • Hitachi 2TB HDS5C3020ALA632 drive DOA


    I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead): ata1: link is slow to respond, please be patient (ready=0) ata1: softreset failed (device not ready) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: link online but device misclassified, retrying ata1: link is slow to respond, please be patient (ready=0) ata1: softreset f........
  • Enable SPAMASSASSIN on Postfix in 5 minutes


    Centos 5 Postfix and SPAMASSASSIN Tutorial yum install spamassassin chkconfig spamassassin on vi /etc/mail/spamassassin/local.cf ############## #required_hits 5 #report_safe 0 #rewrite_header Subject [SPAM] #5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives require........
  • md: data-check of RAID array md3


    This really made me nervous but notice the mdstat says "check". This is because in Ubuntu there is a scheduled mdadm cronscript that runs everyday on Sunday at 00:57 that checks your entire array. This is a good way because it prevents gradual but unnoticed data corruption which Inever thought of. As long as the check completes properly you have peace of mind knowing that your data integretiy is assured and that your hard drives are functioning properly (I'........
  • rsync preserve attributes, permissions/ownership and times without being root non-root user


    One of the purposes of rsync is to backup whole filesystems and archive them but how can you do that properly and restore things to normal if all permissions and ownerships are not preserved from your root filesystem? It's not desirable to have everything running as root, especially not just for an rsync. The Easy rsync preserve permission solution for non-root users sudo is the answer and all you have to do is edit /etc/sudoers At the end o........
  • WD (Western Digital) Advanced Format Drive Lagged/Slow Speed/Performance/Design Flaw EAD/EARS problem WDC WD20EARS-00S8B1


    Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive. This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series. To make it worse this is also when Western Digital introduced "Advanced Format" o........
  • SSH Automatic/Passwordless Logon - Setup Public Key Encryption In Single Command


    This is a very simple solution, but most guides out there make you login twice (once to scp the key) and once to put the key in authorized_keys. There's no need for that. If you don't already have a ~/.ssh/id_rsa.pub just type "ssh-keygen -t rsa" and keep hitting enter until it's done :) Just use this code to easily enable passwordless login with SSHD key=`cat ~/.ssh/id_rsa.pub`;ssh user@192.168.5.25 "echo $key >> ~/.ssh/auth........
  • Seagate Drive 500GB Drive Dying


    This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART. Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device........
  • Seagate 7200.11 firmware defect in 500GB, 1000GB (1TB) and 1500GB (1.5TB) Hard Drives


    Seagate Inventory/Firmware Check I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate. *Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate! Seagate Inventory/Firm........
  • tar gzip: stdout: File too large - Error Size Limit on Large file > 17GB


    The folder I was trying to archive is about 72GB, but much like rsync at about 17GB it chokes because of the filesize. What's with so many common and essential Linux tools having such limitations? I guess it is likely that the authors never wrote their code with the idea that files would be so large but it's still very annoying. It's important to stay on top of these limitations on production servers because I didn't realize what happened until I checked the file with "........
  • Picking an FTPD (vsftpd) Server in Linux Centos/Debian


    I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find. yum search ftp Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: ftp-stud.fht-esslingen.de * base: mirrors.netdna.com * updates: updates.interworx.info * addons: yum.singlehop.com * extras: mirrors.netdna.com rpmforge........
  • Create/Enable SSL Certificates for Apache on Linux/Unix Systems eg. Redhat,Centos,Debian


    Shortcut/Easiest Way To Create A Self-Signed Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key Using the above, you instantly create a self-signed certificate valid for 1530 days and you can simply skip to step #5.) below. If You Need a Real SSLCertificate (eg. Equifax/Openssl) then you need to create a CSR request (you'll need to follow Steps 1.) and 2.) in order to create the CSR. You then upload the CSR Certi........
  • Clustered/Distributed Network Filesystems, Which Ones live up to the hype?


    I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems. DRBD I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........
  • Bash Script/Linux/Unix HTML/XML Parser


    There is a tool called "xml2" which will parse both HTML and XML scripts, this is very useful to do a mass extraction or conversion of data based on say an HTML table etc.. It becomes even more powerful using bash if certain tags are identified with a certain class="" attribute or something else unique to only the tags you want. Happy parsing.........
  • iPhone 3GS Jailbreak Information & Benefits


    Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore. A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly. In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........
  • Using a Mac OSX DMG Image in Windows and Converting to Standard ISO Format use dmg2iso


    The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso I'll only cover theLinux version although the Windows pre-built binary works the same way. Download dmg2iso here for free (from the author's website) It's just silly and doesn't make sense that Ubuntu doe........
  • Configuring OCFS2 Clustered File System on Debian Based Linux including Ubuntu and Kubuntu


    There's a lot of information and guides on OCFS2 for RHELand Centos Linux but the package setup and configuration is slightly different and this has thrown some people off. Installing OC2FS You should install the following packages to get started: apt-get install ocfs2-tools ocfs2console Configure OC2FS In RHEL/Centos the main configuration file is located in /etc/sysconfig/o2cb However in Debian based Linux it is located........
  • ENOM Major Outage


    At this time we can't resolve Enom's website and all DNS requests to their 4 primary name servers are failing, although the hostnames themselves still resolve: Name Server: DNS1.NAME-SERVICES.COM Name Server: DNS2.NAME-SERVICES.COM Name Server: DNS3.NAME-SERVICES.COM Name Server: DNS4.NAME-SERVICES.COM Name Server: DNS5.NAME-SERVICES.COM You would really think Enom, bein........
  • Latest Articles

  • Cloned VM/Server/Computer in Linux won't boot and goes to initramfs busybox Solution
  • How To Add Windows 7 8 10 11 to GRUB Boot List Dual Booting
  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile
  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial
  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif
  • Linux Debian Mint Ubuntu Bridge br0 gets random IP
  • redis requirements
  • How to kill a docker swarm
  • docker swarm silly issues
  • isc-dhcp-server dhcpd how to get longer lease
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian
  • zfs and LUKS how to recover in Linux
  • [error] (28)No space left on device: Cannot create SSLMutex Apache Solution Linux CentOS Ubuntu Debian Mint
  • Save money on bandwidth by disabling reflective rpc queries in Linux CentOS RHEL Ubuntu Debian
  • How to access a disk with bad superblock Linux Ubuntu Debian Redhat CentOS ext3 ext4
  • ImageMagick error convert solution - convert-im6.q16: cache resources exhausted
  • PTY allocation request failed on channel 0 solution
  • docker error not supported as upperdir failed to start daemon: error initializing graphdriver: driver not supported
  • Migrated Linux Ubuntu Mint not starting services due to broken /var/run and dbus - Failed to connect to bus: No such file or directory solution