So say you happen to have 2 NICs of the exact same chipset, they will generally show up as the same name, with possibly a different revision in lspci. Normally this is not an issue if you have a server with 4 NICs, generally the eth0 to eth3 appears from left to the right (or right to left on some vendors) so it doesn't take much figuring out.
Generally if you have different chipsets for different NICs, it should be easy to know which one is eth0 or the first NIC in the OS.........
From the terminal do this:
cat /proc/cpuinfo|grep -E "svm|vmx"
You should get output like this(svm = AMD-v and vmx=Intel-VTx):
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqd........
scp -rp Week09 one@10.10.5.80:"/some/remote/path/with a space/"
Gives me an error:
scp: ambiguous target
The issue is caused by the space in the remote path which needs to be escaped like this:
scp -rp Week09 one@10.10.5.80:"/some/remote/path/with a space/"
Basically you add a backslash in front of each space.........
[root@localhost:~]
BootModuleConfig.sh echo host-ind nfcd........
#if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used
wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2
tar -jxvf ffmpeg-3.3.2.tar.bz2
cd ffmpeg-3.3.2/
./configure --disable-yasm
install prefix /usr/local
source path ........
Say you have a path like this "/some/path/here with spaces/". If you try to transfer it you will get a message along the lines of:
scp -rp 192.168.0.12:"/some/path/here space/" .
scp: /some/path/here: No such file or directory
scp: space: No such file or directory
You can escape each space but what a pain that is especially if you have multiple spaces in the path.
The simplest way is to use the follow........
You need the "openssh-clients" package which contains sftp and scp.
yum -y install openssh-clients........
LSi Megaraid
At first it was configured as a RAID 0, then I deleted the Virtual Disk Group.
I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing.
To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
CPanel ->Basic cPanel &WHMSetup
At the bottom you'll see them, set the nameservers you want to use and the corresponding A record if needed.
Then all new domains will use those settings/nameservers.
It's strange that there's no section for this specifically.........
Some minimal installs of Centos may be missing the scp command, which is actually part of the "openssh-clients" package.
scp not found
yum install openssh-clients........
cp msgFilterRules.dat /other/mail/folder
edit msgFilterRules.dat change all instances of your old mailbox: actionValue="mailbox://joes@mail.server.com/name"
to:
actionValue="imap://joes%40server.com@mail.server.com/INBOX"
sed s/'actionValue="mailbox:joes@mail.server.com'/imap://joes%40server.com@mail.server.com/g msgFilterRules.dat-........
Install the "Editors" and "Net" groups that will give you rsync, ssh, ssh-keygen and cron.
The trickiest thing that I keep forgetting about each time is you have to run "cron-config" which adds the cron service to Windows, and without doing that obviously no cron jobs will be run thus making automatic backups impossible.
Warning about rsync/cygwin and using the -a archive switch.
It's a good thing I caught this because it doesn't work ri........
This was done on Centos butI think it's easier on Debian machines, the paths that it is set to use are tailored towards Debian, so there is some fiddling that needs to be done on Centos.
This is for chrooting ssh, but jailkit has other uses than just SSH jails but I won't cover them in this writeup.
1. Install jailkit
yum install jailkit
2. Setup Jail Home
mkdir /home/jail
chown root:root /home/ja........
This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel.
OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!)
# # # # # #&n........
This is a very simple solution, but most guides out there make you login twice (once to scp the key) and once to put the key in authorized_keys. There's no need for that.
If you don't already have a ~/.ssh/id_rsa.pub just type "ssh-keygen -t rsa" and keep hitting enter until it's done :)
Just use this code to easily enable passwordless login with SSHD
key=`cat ~/.ssh/id_rsa.pub`;ssh user@192.168.5.25 "echo $key >> ~/.ssh/auth........
I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB!
I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition.
Here is what tune2fs tol........
I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find.
yum search ftp
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirrors.netdna.com
* updates: updates.interworx.info
* addons: yum.singlehop.com
* extras: mirrors.netdna.com
rpmforge........
PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist:
[code:1:1fd0f3abbe]
if (!file_exists($OPENSSL)) {
//echo "ERROR: OPENSSL $OPENSSL not foundn";
}[/code:1:1fd0f3abbe]
I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
SSH automatic login without passwordlocal> ssh-keygen -t rsa -f .ssh/id_rsa
-t is the encryption type
-f tells where to store the public/private key pairs. In this case, the .ssh directory on home is being used
A password will be asked; leave this part blank, just pressing
Now, go the .ssh directory, and you will find two new files: id_dsa and id_dsa.pub. The last one is the public part. Now, copy the public key to the serv........
Everyone says there is a "manual" way of doing it and then they tell you to use iTunes, but if you're like me, you're travelling on business in a foreign country and your laptop does not have iTunes and you don't have a way of getting it and/or don't want it.
For this example I'm using the provider "du" in Dubai, UAE (United Arab Emirates) but this method works for virtually all providers.
The requirements in this case to truly "manually update........
First of all, the iPhone is crippled in many ways, but most of my complaints about functionality have been addressed through the jailbreak, Ican run apps in the background of my choosing, I can install a terminal, acccess my phone through SSH and SCP and so much more.
It even addresses the 15 minute e-mail problem, I installed a program called "PushMod" and now set the checking time to just 1 minute.
Apple should really thank the developers for this gift, it ma........
Yes, Iadmit I finally got bitten by the hype as much as I can usually see through it all. Keep in mind this review is of the "stock" phone, no jailbreaking yet which is what really unleashes the customizability and whyI bought iPhone.
I had better things to say about this phone before buying it, and it is a great phone, perhaps the best on the market by far, if not because of the Mac OS port onto the iPhone and all the apps, etc, etc.
With that said........