OVF Tool: Error: Task failed on server: This host does not support Intel VT-x. VMWare VCenter install On ESXi ERror

Intel VT-X is enabled in Virtualbox but it doesn't seem to pass through the needed vmx extension despite the following variables on the host confirming it is enabled:

cat /sys/module/kvm_intel/parameters/nested
Y
cat /sys/module/kvm_intel/parameters/ept
Y

 

 

OVF Tool: Disk progress: 99%
OVF Tool: Transfer Completed
OVF Tool: Powering on VM: Embedded-vCenter-Server-Appliance-
OVF Tool: Task progress: 0%
OVF Tool: Task Failed
OVF Tool: Error: Task failed on server: This host does not support Intel VT-x.
OVF Tool: Error: Fault cause: vim.fault.InvalidState
OVF Tool: Completed with errors
Deployment failed. OVF Tool return error code: 1
Proceed with certificate thumbprint check...
The certificate for server '192.168.1.54' will not be verified because you have provided either the '--no-ssl-certificate-verification' or '--no-esx-ssl-verify' command parameter, which disables
verification for all certificates. Remove this parameter from the command line if you want server certificates to be verified.
Failed to collect support bundle from appliance because: Cannot gather support logs because the appliance was not power on.
=========================================================================== [FAILED] Task: Deploying vCenter Server Appliance execution failed at 19:34:28
===========================================================================
======================================================================================================================================================================================================
Error message: com.vmware.vcsa.installer.ovf.deploy_appliance: ApplianceDeploymentTask: Caught an exception Deployment failed. O

VF Tool return error code: 1
============================================================================================== 19:34:29 ==============================================================================================
Result and Log File Information...


Tags:

ovf, task, server, intel, vt, vmware, vcenter, install, esxi, errorintel, enabled, virtualbox, doesn, vmx, extension, variables, confirming, sys, module, kvm_intel, parameters, nested, ept, disk, completed, powering, vm, embedded, appliance, vim, invalidstate, errors, deployment, certificate, thumbprint, verified, provided, ssl, verification, esx, verify, parameter, disables, certificates, bundle, logs, deploying, execution, vcsa, installer, deploy_appliance, appliancedeploymenttask, exception, vf,

Latest Articles

  • FreePBX 17 How To Add a Trunk
  • Docker Container Onboot Policy - How to make sure a container is always running
  • FreePBX 17 How To Add Phones / Extensions and Register
  • Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes. solution
  • Cisco How To Use a Third Party SIP Phone (eg. Avaya, 3CX)
  • Cisco Unified Communication Manager (CUCM) - How To Add Phones
  • pptp / pptpd not working in DD-WRT iptables / router
  • systemd-journald high memory usage solution
  • How to Install FreePBX 17 in Linux Debian Ubuntu Mint Guide
  • How To Install Cisco's CUCM (Cisco Unified Communication Manager) 12 Guide
  • Linux Ubuntu Redhat How To Extract Images from PDF
  • Linux and Windows Dual Boot Issue NIC Won't work After Booting Windows
  • Cisco CME How To Enable ACD hunt groups
  • How to install gns3 on Linux Ubuntu Mint
  • How to convert audio for Asterisk .wav format
  • Using Cisco CME Router with Asterisk as a dial-peer
  • Cisco CME How To Configure SIP Trunk VOIP
  • Virtualbox host Only Network Error Failed to save host network interface parameter - Cannot change gateway IP of host only network
  • Cisco CME and C7200 Router Testing and Learning Environment on Ubuntu 20+ Setup Tutorial Guide
  • Abusive IP ranges blacklist