status: { DRDY ERR } error: { ICRC ABRT } failed command: WRITE FPDMA QUEUED MCP55 Linux Errors

[ 2868.041375] ata1: EH in SWNCQ mode,QC:qc_active 0x40 sactive 0x40
[ 2868.041554] ata1: SWNCQ:qc_active 0x40 defer_bits 0x0 last_issue_tag 0x6
[ 2868.041556]   dhfis 0x40 dmafis 0x40 sdbfis 0x20
[ 2868.041874] ata1: ATA_REG 0x41 ERR_REG 0x84
[ 2868.042013] ata1: tag : dhfis dmafis sdbfis sactive
[ 2868.042163] ata1: tag 0x6: 1 1 0 1 
[ 2868.042301] ata1.00: exception Emask 0x1 SAct 0x40 SErr 0x400000 action 0x6 frozen
[ 2868.042490] ata1.00: Ata error. fis:0x21
[ 2868.042624] ata1: SError: { Handshk }
[ 2868.042756] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2868.042917] ata1.00: cmd 61/b8:30:4f:0c:7c/03:00:53:00:00/40 tag 6 ncq 487424 out
[ 2868.042918]          res 41/84:30:4f:0c:7c/84:00:53:00:00/40 Emask 0x10 (ATA bus error)
[ 2868.043299] ata1.00: status: { DRDY ERR }
[ 2868.043437] ata1.00: error: { ICRC ABRT }
[ 2868.043576] ata1: hard resetting link
[ 2868.043705] ata1: nv: skipping hardreset on occupied port
[ 2868.508050] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2868.620254] ata1.00: configured for UDMA/133
[ 2868.620414] ata1: EH complete


0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3)
0000:00:05.1 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3)
0000:00:05.2 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3)
 

Some people have reported disabling NCQ has fixed the errors .  This happens even in very recent kernels.

To disable NCQ pass the following to your kernel boot line:

libata.force=noncq

It is reported on many motherboards or virtually any using the MCP55 SATA chipset.


Tags:

drdy, err, icrc, abrt, fpdma, queued, mcp, linux, errors, ata, swncq, mode, qc, qc_active, sactive, defer_bits, last_issue_tag, dhfis, dmafis, sdbfis, ata_reg, err_reg, exception, emask, sact, serr, fis, serror, handshk, cmd, ncq, res, resetting, nv, skipping, hardreset, occupied, sata, gbps, sstatus, scontrol, configured, udma, ide, interface, nvidia, corporation, controller, rev, reported, disabling, kernels, disable, kernel, libata, noncq, motherboards, virtually, chipset,

Latest Articles

  • QEMU / KVM How To Manually Create Basic Virtual Machine VM
  • Linux wlan0 check all wireless clients
  • PHP Issues With Decoding Strange Smart Quotes And Non-Standard ASCII Characters
  • /etc/iproute2/rt_tables default settings file in Linux Centos 6,7 and most other NIX's
  • bind named error solutions named[2169]: error (no valid DS) resolving / error (broken trust chain) resolving / : error (no valid RRSIG) resolving 'com/DS/IN':
  • iptables how to log ALL dropped incoming packets
  • How To Edit Linux Based NM Network Manager Connection Settings Without GUI
  • Linux Disable IPV6 Centos / Debian / Mint Howto
  • Linux use growisofs to burn a larger file on a BD-R / Bluray Disc
  • Linux partprobe/partx cannot access last and 4th partition
  • DRBD Errors Caused By Physical Corruption
  • mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument solution
  • Linux named / bind how to dump, view and clear the cache!
  • Centos 6 / 7 / 8 How To Change Default nameservers in /etc/resolv.conf when using DHCP / dhclient
  • Adobe Acrobat Reader for Linux to use and view XFA Fillable Forms
  • Debian Linux Mint Ubuntu iptables save and restore settings automatically onboot and reboot
  • Why SMART is not smart at all and doesn't properly predict disk errors that cause a kernel panic or crash
  • scp: ambiguous target error and solution
  • VirtualBox How To Add iSCSI Storage using VBoxManage
  • iSCSI on Centos 7 Configuration and Setup Guide for Initiator and Target