Dell CS24-NV7 Howto Enable LAN/NICs and PXEBoot in the BIOS

Dell CS24-NV7

Unusually the Virtualization was enabled when I got this server but all the NICs were diabled in the BIOS including PXE boot!

Advanced -> Advanced Chipset Control


PCI Slot 1 Option ROM: Enabled
Onboard LAN1 Control: Enabled
LAN1 Option ROM Scan: Enabled (you need it for PXE boot)
Onboard LAN2 Control: Enabled
LAN2 Option ROM Scan: Enabled

*you will need to reboot and enter the BIOS again before the NVIDIA Boot Agents for the NICs/PXE Agent is visible in the Boot section and boot options.  You'll also need to enter the "Boot section" and hit "x" to enable each one of them for booting and assign them the correct boot order ou prefer.


Boot:

PCI BEV: 2-NVIDIA Boot Agent 277.05 (eth0)
         NVIDIA Boot Agent 277.0547 (eth1) 


Tags:

dell, cs, nv, howto, enable, lan, nics, pxeboot, biosdell, unusually, virtualization, enabled, server, diabled, bios, pxe, advanced, chipset, pci, slot, rom, onboard, scan, reboot, nvidia, visible, ll, quot, booting, assign, ou, bev, eth,

Latest Articles

  • FreePBX 17 How To Add a Trunk
  • Docker Container Onboot Policy - How to make sure a container is always running
  • FreePBX 17 How To Add Phones / Extensions and Register
  • Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes. solution
  • Cisco How To Use a Third Party SIP Phone (eg. Avaya, 3CX)
  • Cisco Unified Communication Manager (CUCM) - How To Add Phones
  • pptp / pptpd not working in DD-WRT iptables / router
  • systemd-journald high memory usage solution
  • How to Install FreePBX 17 in Linux Debian Ubuntu Mint Guide
  • How To Install Cisco's CUCM (Cisco Unified Communication Manager) 12 Guide
  • Linux Ubuntu Redhat How To Extract Images from PDF
  • Linux and Windows Dual Boot Issue NIC Won't work After Booting Windows
  • Cisco CME How To Enable ACD hunt groups
  • How to install gns3 on Linux Ubuntu Mint
  • How to convert audio for Asterisk .wav format
  • Using Cisco CME Router with Asterisk as a dial-peer
  • Cisco CME How To Configure SIP Trunk VOIP
  • Virtualbox host Only Network Error Failed to save host network interface parameter - Cannot change gateway IP of host only network
  • Cisco CME and C7200 Router Testing and Learning Environment on Ubuntu 20+ Setup Tutorial Guide
  • Abusive IP ranges blacklist