WD 20EARX Dead Again

Another new drive bad from the start:

 

Jun  2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
Jun  2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error
Jun  2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun  2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/00:00:80:4e:84/02:00:52:00:00/40 tag 0 ncq 262144 in
Jun  2 15:14:18 one-desktop kernel: [15895.386789]          res 40/00:04:80:4e:84/00:00:52:00:00/40 Emask 0x50 (ATA bus error)
Jun  2 15:14:18 one-desktop kernel: [15895.386791] ata2.00: status: { DRDY }
Jun  2 15:14:18 one-desktop kernel: [15895.386794] ata2: hard resetting link
Jun  2 15:14:18 one-desktop kernel: [15895.912558] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jun  2 15:14:18 one-desktop kernel: [15895.924759] ata2.00: configured for UDMA/33
Jun  2 15:14:18 one-desktop kernel: [15895.924770] ata2: EH complete
Jun  2 15:14:18 one-desktop kernel: [15895.924844] sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Jun  2 15:14:18 one-desktop kernel: [15895.924854] sd 1:0:0:0: [sdb] Write Protect is off
Jun  2 15:14:18 one-desktop kernel: [15895.924856] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jun  2 15:14:18 one-desktop kernel: [15895.924872] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun  2 15:14:20 one-desktop kernel: [15897.386464] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
Jun  2 15:14:20 one-desktop kernel: [15897.386468] ata2.00: irq_stat 0x08000000, interface fatal error
Jun  2 15:14:20 one-desktop kernel: [15897.386470] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun  2 15:14:20 one-desktop kernel: [15897.386474] ata2.00: cmd 60/00:00:80:b0:88/02:00:52:00:00/40 tag 0 ncq 262144 in
Jun  2 15:14:20 one-desktop kernel: [15897.386475]          res 40/00:04:80:b0:88/00:00:52:00:00/40 Emask 0x50 (ATA bus error)
Jun  2 15:14:20 one-desktop kernel: [15897.386476] ata2.00: status: { DRDY }
Jun  2 15:14:20 one-desktop kernel: [15897.386479] ata2: hard resetting link
Jun  2 15:14:20 one-desktop kernel: [15897.912554] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jun  2 15:14:20 one-desktop kernel: [15897.924718] ata2.00: configured for UDMA/33
Jun  2 15:14:20 one-desktop kernel: [15897.924728] ata2: EH complete
Jun  2 15:14:20 one-desktop kernel: [15897.924798] sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Jun  2 15:14:20 one-desktop kernel: [15897.924807] sd 1:0:0:0: [sdb] Write Protect is off
Jun  2 15:14:20 one-desktop kernel: [15897.924809] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jun  2 15:14:20 one-desktop kernel: [15897.924821] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun  2 15:14:24 one-desktop kernel: [15901.680142] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
Jun  2 15:14:24 one-desktop kernel: [15901.680145] ata2.00: irq_stat 0x08000000, interface fatal error
Jun  2 15:14:24 one-desktop kernel: [15901.680148] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun  2 15:14:24 one-desktop kernel: [15901.680152] ata2.00: cmd 60/00:00:80:fe:93/02:00:52:00:00/40 tag 0 ncq 262144 in
Jun  2 15:14:24 one-desktop kernel: [15901.680153]          res 40/00:04:80:fe:93/00:00:52:00:00/40 Emask 0x50 (ATA bus error)
Jun  2 15:14:24 one-desktop kernel: [15901.680154] ata2.00: status: { DRDY }
Jun  2 15:14:24 one-desktop kernel: [15901.680158] ata2: hard resetting link
Jun  2 15:14:24 one-desktop kernel: [15902.212545] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jun  2 15:14:25 one-desktop kernel: [15902.224841] ata2.00: configured for UDMA/33
Jun  2 15:14:25 one-desktop kernel: [15902.224849] ata2: EH complete
Jun  2 15:14:25 one-desktop kernel: [15902.224913] sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Jun  2 15:14:25 one-desktop kernel: [15902.224923] sd 1:0:0:0: [sdb] Write Protect is off
Jun  2 15:14:25 one-desktop kernel: [15902.224924] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jun  2 15:14:25 one-desktop kernel: [15902.224936] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun  2 15:14:33 one-desktop kernel: [15911.056699] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
Jun  2 15:14:33 one-desktop kernel: [15911.056702] ata2.00: irq_stat 0x08000000, interface fatal error
Jun  2 15:14:33 one-desktop kernel: [15911.056705] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun  2 15:14:33 one-desktop kernel: [15911.056709] ata2.00: cmd 60/00:00:80:a8:ae/02:00:52:00:00/40 tag 0 ncq 262144 in
Jun  2 15:14:33 one-desktop kernel: [15911.056709]          res 40/00:04:80:a8:ae/00:00:52:00:00/40 Emask 0x50 (ATA bus error)
Jun  2 15:14:33 one-desktop kernel: [15911.056711] ata2.00: status: { DRDY }
Jun  2 15:14:33 one-desktop kernel: [15911.056714] ata2: hard resetting link
Jun  2 15:14:34 one-desktop kernel: [15911.582543] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jun  2 15:14:34 one-desktop kernel: [15911.594947] ata2.00: configured for UDMA/33
Jun  2 15:14:34 one-desktop kernel: [15911.594957] ata2: EH complete
Jun  2 15:14:34 one-desktop kernel: [15911.595026] sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Jun  2 15:14:34 one-desktop kernel: [15911.595036] sd 1:0:0:0: [sdb] Write Protect is off
Jun  2 15:14:34 one-desktop kernel: [15911.595037] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jun  2 15:14:34 one-desktop kernel: [15911.595049] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun  2 15:14:38 one-desktop kernel: [15915.981711] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
Jun  2 15:14:38 one-desktop kernel: [15915.981715] ata2.00: irq_stat 0x08000000, interface fatal error
Jun  2 15:14:38 one-desktop kernel: [15915.981717] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun  2 15:14:38 one-desktop kernel: [15915.981721] ata2.00: cmd 60/00:00:80:36:bc/02:00:52:00:00/40 tag 0 ncq 262144 in
Jun  2 15:14:38 one-desktop kernel: [15915.981722]          res 40/00:04:80:36:bc/00:00:52:00:00/40 Emask 0x50 (ATA bus error)
Jun  2 15:14:38 one-desktop kernel: [15915.981724] ata2.00: status: { DRDY }
Jun  2 15:14:38 one-desktop kernel: [15915.981727] ata2: hard resetting link
Jun  2 15:14:39 one-desktop kernel: [15916.510042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jun  2 15:14:39 one-desktop kernel: [15916.522712] ata2.00: configured for UDMA/33
Jun  2 15:14:39 one-desktop kernel: [15916.522723] ata2: EH complete
Jun  2 15:14:39 one-desktop kernel: [15916.522797] sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Jun  2 15:14:39 one-desktop kernel: [15916.522806] sd 1:0:0:0: [sdb] Write Protect is off
Jun  2 15:14:39 one-desktop kernel: [15916.522808] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jun  2 15:14:39 one-desktop kernel: [15916.522819] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun  2 15:15:05 one-desktop kernel: [15942.773369] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
Jun  2 15:15:05 one-desktop kernel: [15942.773372] ata2.00: irq_stat 0x08000000, interface fatal error
Jun  2 15:15:05 one-desktop kernel: [15942.773375] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun  2 15:15:05 one-desktop kernel: [15942.773379] ata2.00: cmd 60/00:00:80:fc:0b/01:00:53:00:00/40 tag 0 ncq 131072 in
Jun  2 15:15:05 one-desktop kernel: [15942.773380]          res 40/00:04:80:fc:0b/00:00:53:00:00/40 Emask 0x50 (ATA bus error)
Jun  2 15:15:05 one-desktop kernel: [15942.773382] ata2.00: status: { DRDY }
Jun  2 15:15:05 one-desktop kernel: [15942.773385] ata2: hard resetting link
Jun  2 15:15:06 one-desktop kernel: [15943.302542] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jun  2 15:15:06 one-desktop kernel: [15943.314579] ata2.00: configured for UDMA/33
Jun  2 15:15:06 one-desktop kernel: [15943.314590] ata2: EH complete
Jun  2 15:15:06 one-desktop kernel: [15943.314661] sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Jun  2 15:15:06 one-desktop kernel: [15943.314671] sd 1:0:0:0: [sdb] Write Protect is off
Jun  2 15:15:06 one-desktop kernel: [15943.314673] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jun  2 15:15:06 one-desktop kernel: [15943.314685] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun  2 15:15:06 one-desktop kernel: [15943.587291] ata2.00: exception Emask 0x50 SAct 0x3 SErr 0x280900 action 0x6 frozen
Jun  2 15:15:06 one-desktop kernel: [15943.587295] ata2.00: irq_stat 0x08000000, interface fatal error
Jun  2 15:15:06 one-desktop kernel: [15943.587297] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun  2 15:15:06 one-desktop kernel: [15943.587301] ata2.00: cmd 60/00:00:80:be:0c/01:00:53:00:00/40 tag 0 ncq 131072 in
Jun  2 15:15:06 one-desktop kernel: [15943.587302]          res 40/00:0c:80:bd:0c/00:00:53:00:00/40 Emask 0x50 (ATA bus error)
Jun  2 15:15:06 one-desktop kernel: [15943.587303] ata2.00: status: { DRDY }
Jun  2 15:15:06 one-desktop kernel: [15943.587306] ata2.00: cmd 60/00:08:80:bd:0c/01:00:53:00:00/40 tag 1 ncq 131072 in
Jun  2 15:15:06 one-desktop kernel: [15943.587307]          res 40/00:0c:80:bd:0c/00:00:53:00:00/40 Emask 0x50 (ATA bus error)
Jun  2 15:15:06 one-desktop kernel: [15943.587308] ata2.00: status: { DRDY }
Jun  2 15:15:06 one-desktop kernel: [15943.587311] ata2: hard resetting link
Jun  2 15:15:06 one-desktop kernel: [15944.111122] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Jun  2 15:15:06 one-desktop kernel: [15944.123360] ata2.00: configured for UDMA/33
Jun  2 15:15:06 one-desktop kernel: [15944.123372] ata2: EH complete
Jun  2 15:15:06 one-desktop kernel: [15944.123445] sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Jun  2 15:15:06 one-desktop kernel: [15944.123455] sd 1:0:0:0: [sdb] Write Protect is off
Jun  2 15:15:06 one-desktop kernel: [15944.123456] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jun  2 15:15:06 one-desktop kernel: [15944.123468] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA


[sudo] password for one:
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD20EARX-00PASB0
Serial Number:    WD-WMAZA9475034
Firmware Version: 51.0AB51
User Capacity:    2,000,398,934,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Jun  2 22:03:02 2013 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:          (38760) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 255) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x3035)    SCT Status supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   100   253   021    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       3
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       11
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       3
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       2
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       2
194 Temperature_Celsius     0x0022   102   102   000    Old_age   Always       -       48
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       3
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 


Tags:

wd, earx, againanother, jun, desktop, kernel, ata, exception, emask, sact, serr, irq_stat, interface, fatal, serror, unrecovdata, hostint, badcrc, cmd, ncq, res, drdy, resetting, sata, gbps, sstatus, scontrol, configured, udma, sdb, byte, hardware, sectors, tb, tib, mode, cache, enabled, doesn, dpo, fua, fe, ae, bc, fc, bd, sudo, password, smartctl, pc, linux, gnu, copyright, allen, http, smartmontools, sourceforge, wdc, pasb, wmaza, firmware, ab, user, capacity, bytes, database, showall, specification, draft, indicated, pdt, capability, overall, assessment, offline, auto, execution, previous, completed, capabilities, execute, suspend, scan, supported, conveyance, selective, saves, supports, timer, logging, recommended, polling, extended, sct, feature, attributes, revision, vendor, thresholds, attribute_name, thresh, updated, when_failed, raw_value, raw_read_error_rate, spin_up_time, start_stop_count, old_age, reallocated_sector_ct, seek_error_rate, power_on_hours, spin_retry_count, calibration_retry_count, power_cycle_count, off_retract_count, load_cycle_count, temperature_celsius, reallocated_event_count, current_pending_sector, offline_uncorrectable, udma_crc_error_count, multi_zone_error_rate, errors, logged, span, min_lba, max_lba, current_test_status, not_testing, flags, scanning, selected, spans, remainder, disk, pending, resume,

Latest Articles

  • How to install gns3 on Linux Ubuntu Mint
  • How to convert audio for Asterisk .wav format
  • Using Cisco CME Router with Asterisk as a dial-peer
  • Cisco CME How To Configure SIP Trunk VOIP
  • Virtualbox host Only Network Error Failed to save host network interface parameter - Cannot change gateway IP of host only network
  • Cisco CME and C7200 Router Testing and Learning Environment on Ubuntu 20+ Setup Tutorial Guide
  • Abusive IP ranges blacklist
  • How to Install Any OS on a Physical Drive from Windows Using VMware Workstation (Linux, Windows, BSD)
  • CDN Cloudflare how to set and preserve the real IP of the client without modifying application code on Apache
  • CentOS 7 fix Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=container error was 14: curl#6 -
  • Ubuntu Debian How To Install Recommended Packages Automatically
  • How to set Linux Ubuntu Redhat Debian Command Line http https socks proxy for yum apt
  • How to resize a pdf without losing much quality in Linux Mint Ubuntu Debian Redhat Solution
  • qemu: could not load PC BIOS 'bios-256k.bin' solution
  • Proxmox How To Custom Partition During Install
  • Hyper-V Linux VM Boots to Black Screen, Storage, NIC Not Found Issues
  • Ubuntu Mint How to Fix Missing/Broken /dev and /dev/pts which causes terminal to immediately close exit and not work
  • How high can a Xeon CPU get?
  • bash fix PATH environment variable "command not found" solution
  • Ubuntu Linux Mint Debian Redhat Youtube Cannot Play HD or 4K videos, dropped frames or high CPU usage with Nvidia or AMD Driver