This is a quick overview of the main screens that you will need to go through to do the Cisco Unified Communication Manager installation (CUCM).
Skip the media test
........
This example is using RTL8821AU chipset from a TP-Link T2U Plus USB adapter and other similar ones should work the same.
Here's how to get this chipset RTL8821AU working in Linux.
Here's how to get RTL8812 and RTL8822 working in Linux.........
This sometimes happens when trying to install the EFIversion of grub to a device when you are booted into Legacy/MBR mode. It doesn't seem to occur on all machines, but some and seems somewhat BIOS dependent.
grub-install --target=x86_64-efi /dev/sda
Installing for x86_64-efi platform.
grub-install.real: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
grub-install.real: warning: Couldn't find physica........
The error below can be caused by a gateway that is unpingable:
docker swarm join --token SWMTKN-1-1kogg8da68gtb1j7ezaddowyy9s0an5s9tue758o20k18liskw-5h3f61hrrmv3u6agshvbtcklf 172.16.1.80:2377
Error response from daemon: manager stopped: can't initialize raft node: rpc error: code = Unknown desc = could not connect to prospective new cluster member using its advertised address: rpc error: code = DeadlineExceeded desc = context deadline exceeded........
Sometimes users take their removal drives and unplug and replug them to test what happens during the failure of a disk. However, this breaks things quite badly due to the /dev/mapper in LUKS not coming back online due to it not being closed.
In other words, generally with non-encrypted drives the process is smooth but when encrypted you may want to follow a strategy like this:
We can see below that both disks are unavailable as they were physically remov........
Nov 15 17:00:49 rttbox kernel: overlayfs: filesystem on '/var/lib/docker/overlay2/check-overlayfs-support450709549/upper' not supported as upperdir
Nov 15 17:00:49 rttbox dockerd[93755]: failed to start daemon: error initializing graphdriver: driver not supported
The above error is often/normally caused because you are trying to run docker out of an unsuitable directory/filesystem. For example if you try to place docker's data inside an existing overl........
This is a weird issue as sometimes when upgrading or even migrating, this could happen and the reason is simple but maybe not 100% obvious at first.
You will find that your GUIdoesn't load and most services fail to start, even logind
Here are some errors you may see:
Mar 13 22:22:23 rttbox systemd-logind[2892]: Failed to connect to system bus: No such file or directory
Mar 13 22:22:23 rttbox systemd-logind........
find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV"
Africa/Addis_Ababa
Africa/Abidjan
Africa/Blantyre
Africa/Lusaka
Africa/Casablanca
Africa/Libreville
Africa/Asmara
Africa/Bujumbura
Africa/Dakar
Africa/Lagos
Africa/Malabo
Africa/Harare
Africa/Kigali........
Step 1.) Upgrade to Debian 11 first
The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful.
Step 2.) Update sources.list
Update your /etc/apt/sources.list like this:
deb http://........
The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself.
I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all.
docker run -it --runtime=nvidia --gpus all ubuntu bash
These works for most images li........
haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx.
haproxy is used by many large sites per Wikipedia:
HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........
You might assume you have a bad drive or the SATA interface/cable is bad, or the power supply is bad/weak to the drive. These are all possible issues, but definitely check your SATA cable for "twisting". It is a big issue because until the error stops or times out, your system will not boot (in my case this was the case even though the drive with the issue was not part of the OS or booting process at all).
If you run an open rig that you move around often that ha........
Just a quick note and warning is that if you are testing to see if EFIPXE booting works on a VM, MAKE SURE it actually works. For example Iinitially tested using my Distro's QEMU 2.5+dfsg-5ubuntu10.46 and ovmf BIOS firmware (OVMF supports EFI). However, I found on old versions of QEMU (like 2.5), EFIbooting with GRUB NEVER works so it may appear that you have made a mistake when everything is fine when you boot a physi........
A very common use case is that you don't want to waste time using a video editor that requires you to open it up and manually import the video clip and audio clip, then manually delete the old audio track and import the video and new audio. That's too much work and time since we don't want to go through the hassle.
ffmpeg is our solution, all we have to do is specify 3 variables and we're done!
-i Windows2019-Server-Noaudio.mp4 is our in........
This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu!
Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........
This is the reason that I don't like the new ADATA USB drives such as the UV128/64GB or 128GB drives and other ones that look to be the same style (the green sliding USB connector).
They just don't work well from new and never work properly at any point.
[ 788.242463] usb 1-1.2: new high-speed USB device number 16 using ehci-pci
[ 788.339816] usb 1-1.2: New USB device found, idVendor=125f, idProduct=db8a
[ 7........
dd is a very handy tool and there are some more practical things we can do. For example if we want to dump a 3TB drive and want to preserve it and only 200GB are being used on the 3TB we can save a lot of space with gzip.
Backing Stuff up with dd
How to Use dd to backup a raw hard drive and tar gzip at once
Change /dev/sda to the drive you want to backup
Change /mnt/extras........
By default printscreen or alt print screen will get the whole desktop or the application in focus, respectively. But what if you want to select a portion of the screen?
gnome-screenshot:
ksnapshot
compiz
This is a nicely integrated solution
sudo apt-get install compizconfig-s........
The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs.
qemu-kvm command:
/usr/libexec/qemu-kvm -version
QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard
........
For some reason, perhaps you don't want to run a daemon or let Letsencrypt have access to your production server.
There is a way to use it like a normal CSR/CA setup in manual mode.
./letsencrypt-auto certonly --manual -d realtechtalk.com - www.realtechtalk.com
Eventually you will get prompted to create a certain path and file with certain data:
Create a file containing just this data:
Casdfasfadsfsad........
The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported.
Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........
By default telnet is not enabled or installed on the latest Windows servers so you'll get an error saying:
telnet is not recognized as an internal or external command
dism /online /Enable-Feature /FeatureName:TelnetClient
........
./certbot-auto --apache certonly
Saving debug log to /var/log/letsencrypt/letsencrypt.log
Plugins selected: Authenticator apache, Installer apache
No names were found in your configuration files. Please enter in your domain
name(s) (comma and/or space separated) (Enter 'c' to cancel): yourdomain.com
Obtaining a new certificate
Performing the following challenges:
http-01 challenge for yourdomain.com
Cleaning........
By default VMWare Workstation often doesn't work as we would like.
If you create a VM with a default NAT IP it won't work you will find the NIC is disconnected (even though on the VMWare side it says connected including at Power On).
How To Solve It
1.) Create New VMNet for NAT
Click "Edit" -> "Virtual Network Editor"
Click "Add Network"
Select Network To Add "VMNet1" (........
Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated.
It has caused a kernel panic and system crash repeatedly as we can see from the logs.
But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector.
Any time I have had anything but 0 for that attribute it........
systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system.
The key commands or arguments you will use with systemctl are the following:
Unit Commands:
list-units [PATTERN...] List loaded units
&nbs........
wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe
--2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe
Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85
Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1525561 (1.5........
sudo apt-get install hwloc-nox
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
hwloc-nox
0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded.
Need to get 151 kB of archives.
After this operation, 453 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubunt........
#mount the VCSA DVD
mount /dev/sr0 /mnt/cd
#alternatively you could mount the iso directly
mount -o loop vcsa.iso /your/mount/path
#for this purpose we are using the CLI installer on Linux
cd /mnt/cd/vcsa-cli-installer/lin64
#no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file
./vcsa-deploy
Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
Here is the only solution Ifound that works in Firefox:
*Note you could basically just copy all of the commands in bold (the rest just shows the output)
Install sqlite3
sqlite3 places.sqlite
sqlite> .clone places.sqlite-fixed
moz_places... done
moz_historyvisits... done
moz_inputhistory..........
I don't recall having this issue in the distant past but nowadays at least Debian seems to be very picky about this.
I used dd to copy one hard drive to another and tried booting it. Everything seemed fine with grub working but each time it would drop to the busybox shell. There is no particular error so this is misleading.
Normally the first things you would check are to make sure your fstab is correct (that the UUID is correct)and that you've updated grub.&........
This happens if you are running a kdenlive script from the shell of a remote machine without using SSH "-X" forwarding and it will also cause any areas where you write text to be a white screen for that duration.
melt FusionFestival.kdenlive
No LADSPA plugins were found!
Check your LADSPA_PATH environment variable.
[producer_xml] failed to load transition "qtblend"
[producer_xml] failed to load transition &q........
When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right.
Solution for me:
My example uses 3 videos in total so "n=3" and a=1 to include audio.
ffmpeg -threads 12 -i file1.mp4 -........
#if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used
wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2
tar -jxvf ffmpeg-3.3.2.tar.bz2
cd ffmpeg-3.3.2/
./configure --disable-yasm
install prefix /usr/local
source path ........
This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether.
Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........
This is a VIA made VL805 USB 3.0 Chipset with 4-ports and MOLEX powered. First of all this unit was cheap at about only 9 USD with fast shipping. My biggest concern was if this was a quality unit and would it really give you full USB 3.0 speeds (some people reported with similar cards that for some weird r........
When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help).
At first cudaminer will give you these errors:
stratrum_recv_line failed
...retry after 15 seconds
GPU #0: Geforce 210 with compute ca........
Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues.
Take for example the error messages from Linux Mint:
[804829.895414] usb 1-1: USB disconnect, device number 11
[806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........
Transaction Check Error:
file /usr/lib64/php/modules/fileinfo.so conflicts between attempted installs of php-pecl-fileinfo-1.0.4-2.el6.rf.x86_64 and php-common-5.3.3-49.el6.x86_64
solution you can't install php-pecl-fileinfo it seems to be incompatble with the php5.3 being installed:
yum --exclude=php-pecl-fileinfo --skip-broken --disablerepo=epel install php-*........
*Update so this doesn't work it must be something to do with the path of nfs or something else but the installer fails with "Installer crashed" at the end whereas with the CD/USB it works.
This assumes you've already installed and configured a separate PXE/DHCP server somewhere else and your /tftpboot directory is setup.
This is for Linux Mint 18.1 but generally applies to most versions although you may have tro change things like "casper"........
Normally the below would indicate a failing or failed drive. In this case the SATA port was unplugged and sometimes the Linux kernel/motherboard even with AHCIjust don't play nice and can't handle it.
What happened is Iplugged in a new drive after removing another one. However the log shows that after the old drive was plugged in the Linux kernel kept complaining thinking the drive was there but not responding properly. This continued even with reseating........
In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below.
mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore.
[45817.162728] ata4: exception........
Cannot even "Browse Network" when clicking on "Windows Network"
Unable to mount location
Failed to retrieve share list from server: No such file or directory
logs:
[2017/02/14 00:16:44.271314, 0] ../source3/nmbd/nmbd.c:58(terminate)
Got SIGTERM: going down...
[2017/02/13 17:35:41.797944, 0] ../lib/util/become_daemon.c:124(daemon_ready)
&........
Many users still are not aware but simply patching OpenSSL does not secure you against many known and easy to exploit attacks that will render your encryption useless by an attacker.
Use the following setings in /etc/httpd/conf.d/ssl.conf
SSLCipherSuite "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH EDH+aRSA !CAMELLIA !SEED !3DES !RC4 !aNULL !eNULL !LOW !MD5 !EXP !PSK !........
This actually only happened after an e-mail server ran out of space due to run away log files. Normal Desktop clients were not affected. It appeared to be a bug in K9 mail but even reinstalling/wiping all settings did not fix it (read e-mails would still not reappear).
This is moreso a bug in Dovecot where it probably messes up the index files.
How do you fix this in Dovecot/your e-mail server?
You need to delete the do........
sudo fdisk /dev/sdh
WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: The size of this disk is 8.0 TB (8001563221504 bytes).
DOS partition table format can not be used on drives for volumes
larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID
partition table format (GPT).
The device presents a l........
I do not understand why heartbeat would try to communicate with another system not considered part of the node:
heartbeat: [8280]: WARN: string2msg_ll: node [otherbox.com] failed authentication
........
rm /vz/lock/1200.lck
rm: remove regular file `/vz/lock/1200.lck'? y
vzctl start 1200
Container already locked
vzctl start 1200
Starting container ...
vzquota : (error) can't lock quota file, some quota operations are performing for id 1200
vzquota on failed [7]
vzquota off 1200
vzctl start 1200
vzquota on 1200
root@rttbox ~]# vzquota off 1200
vzquota : (........
Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access.
So in this case you add a second physical or disk or already ha........
#solution
Edit /etc/yum.repos.d/openvz.repo
For the first two entries comment out #mirrorlist and uncomment #baseurl and then it worked
openvz yum problem Centos 6.5 cannot find file on mirror:
yum update
Loaded plugins: fastestmirror
Determining fastest mirrors
* openvz-kernel-rhel6: mirrors.ustc.edu.cn
* openvz-utils: mirrors.ustc.edu.cn
base ........
ResourceManager[31705]: CRIT: Resource STOP failure. Reboot required!
This happened on a cluster Iam running with heartbeat for no particular reason that I can figure out.
The box ended up rebooting itself for some reason. It was not a big deal in the sense that the other servers in the cluster kept running but it would be nice to find the cause of this.........
Apr 17 11:55:47 Cluster01 heartbeat: [1426]: WARN: ha_msg_add_nv_depth: line doesn't contain '='
Apr 17 11:55:47 Cluster01 heartbeat: [1426]: info: >>>
Apr 17 11:55:47 Cluster01 heartbeat: [1426]: ERROR: NV failure (msgfromsteam): [>>>
]
I have never been able to reproduce the above but it happened on heartbeat-3.04-2 when Itook a node down for testing.
One thing Ibelieve caused it was by configuring ha.cf........
ERROR: make_io_childpair: cannot open ucast br0
You cannot specify ucast br0 without an IP address associated with it.........
c1: warnings being treated as errors
stonith_signal.h:34: error: 'stonith_signal_set_simple_handler' defined but not used
gmake[3]: *** [apcmaster.lo] Error 1
gmake[3]: Leaving directory `/root/rpmbuild/BUILD/heartbeat-1.2.4/lib/plugins/stonith'
gmake[2]: *** [all-recursive] Error 1
gmake[2]: Leaving directory `/root/rpmbuild/BUILD/heartbeat-1.2.4/lib/plugins'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/root/rpmbuild/BUI........
# first we need a physical volume which we use the pvcreate tool to create
# I create mine on /dev/sdb3
pvcreate /dev/sdb3
dev_is_mpath: failed to get device for 8:19
Physical volume "/dev/sdb3" successfully created
# pvdisplay shows the newly created volume
pvdisplay
"/dev/sdb3" is a new physical volume of "1.35 TiB"
--- NEW Physical volume ---
PV N........
#count=10000 makes an image of 10000MB make sure your image is at least the same as your existing
dd if=/dev/zero of=yourimage.img bs=1M count=10000
# losetup -fv newimage.raw
# fdisk -cu /dev/loop0
# kpartx -a /dev/loop0
# dd if= of=/dev/mapper/loop0p1
# e2fsck -f /dev/mapper/loop0p1
# resize2fs /dev/mapper/loop0p1
# a lot of guides tell you to edit /etc/fst........
On primary node
drbdadm connect all
On secondary node
drbdadm -- --discard-my-data connect all
........
./configure
./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory
Error: kernel version not found.
Please make sure your kernel is configured.
dr-xr-xr-x. 4 root root 4096 Feb 21 06:13 ..
lrwxrwxrwx 1 root root 45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25
drwxr-xr-x 2 root root 4096 Feb 12 20........
[3805108.257042] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[3805108.257052] sd 0:0:0:0: [sda] Write Protect is off
[3805108.257054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[3805108.257066] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[3805108.257083] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[3805108.257090] sd 0:0:0:0: [sda] Write Protect is off........
The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results.
This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane.
Adapter #0
Enclosure Device ID: 32
Slot Number: 0
Enclosure position: N/A
De........
LSi Megaraid
At first it was configured as a RAID 0, then I deleted the Virtual Disk Group.
I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing.
To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
pxe-32 tftp open timeout
The solution was to enable tftp in xinetd with "chkconfig tftp on".
See the troubleshooting below:
chkconfig --list
NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off
acpid 0:off&n........
These drives seem to die very easily during shipping:
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 18 8b 65 e0 00 00 08 00
end_request: I/O error, dev sda, sector 411788768
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 18 8b........
Another new drive bad from the start:
Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error
Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........
This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad.
ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:00:........
Here's the link to the warranty checker and from there you can also create an RMA:
https://myapps.taec.toshiba.com/myapps/admin/jsp/webrma/addRequest1NoLogin.jsp
Note that the serial# shown in SMART is not complete as is the case for many other brand sof HDDs.
For example a 2TB Toshiba shows the following Serial Number in SMART:
Device Model:........
Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........
[1433128.139339] sd 5:0:1:0: [sde] Unhandled error code
[1433128.139343] sd 5:0:1:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[1433128.139348] sd 5:0:1:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[1433128.139360] end_request: I/O error, dev sde, sector 0
[1433128.139410] sd 5:0:1:0: [sde] Unhandled error code
[1433128.139414] sd 5:0:1:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[1433128.139420] sd 5:0:1........
The first Hitachi Deskstar 2TB 5K3000 drive I bought arrived DOA for whatever reason (not recognized by the BIOS or OS). Perhaps it was shipping since I bought only 1 hard drive. When I bought 4 through another Vendor, all 4 checked out fine.
I was worried about the RMA process because a lot of people have complained about Hitachi taking weeks to send out their hard drive and almost implied the warranty is useless.
I'm happy to report that my experience was great a........
I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem:
We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead):
ata1: link is slow to respond, please be patient (ready=0)
ata1: softreset failed (device not ready)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: link online but device misclassified, retrying
ata1: link is slow to respond, please be patient (ready=0)
ata1: softreset f........
I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though.
There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........
http://www.splitbrain.org/blog/2010-06/15-linux_ocr_software_comparison
They did a great writeup and comparison on the different OCR options available for Linux.........
My Samsung drive failed on me, at first I thought it was the enclosure but a direct SATA connection causes the same problems for discs that are inserted. It will work fine for a few minutes but then starts spewing the errors below.
I've never been a fan of Korean made optical drives and have always had trouble with them. The problem is that I don't believe NEC and Lite-ON make drives anymore, and I considered them the leaders.
Apr 7 11:58:48 bo........
I don't have a solution other than to use rsync, I used diff on about 1.7TB of data which includes hundreds of thousands if not millions of small files to ensure nothing was missing or corrupt.
diff didn't even get past the first large directory without spitting that error out.
Keep in mind I used "diff -r" because that means recursive, otherwise it wouldn't compare all files and subdirectories and would be a false way of doing it.........
I don't expect this to be solved soon but some of Yahoo's DNS servers are out of whack. I changed the IPs of some nameservers of some domains and now most Yahoo users can't e-mail to those domains!
As you can see below by the "No MX or A records for mychangedomain.com", now Yahoo's DNS/mailserver DNS cache is wrong. You would think they would at least have cached the old incorrect records, but instead for some reason their DNS cache has no entry and doesn't seem........
There are all kinds of threads and links on the internet, and this seems to be a contentious issue butI don't know why.
95th percentile is either a good deal for some or a big rip off for others, Ijust said it there :)
But the reality is that for MOST people who transfer low amounts of data but burst to higher speeds such as 40mbit+ even for short periods of time, then you'll pay a lot of money to do that.
Basically 95th percentile is an-old archaic method........
kernel 2.6.27.54
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
mptbase: ioc0: Initiating bringup
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000001!
mptbase: ioc0: ERROR - Diagnostic reset FAILED! (102h)
mptbase: ioc0: WARNING - NOT READY!
mptbase: ioc0: ERROR - didn't initialize proper........
I bought the 1TB Deskstar C revision recently at just $49 each and put them in RAID 1for my Desktop.
Look at how close the old Deskstar 1TB comes to matching the performance of the mor expensive Samsung and WD's?
This is phenomal, I can't believe the performance I've gotten out of these cheap drives.
http://www.tomshardware.com/reviews/hitachi-western-digital-terabyte,2017-6.html........
CPU/Kernel/MB/RAID problem?
Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168]
Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........
[137392.910057] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x80000 action 0x6 frozen
[137392.910077] ata4: SError: { 10B8B }
[137392.910095] ata4.00: cmd 60/20:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 16384 in
[137392.910099] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[137392.910122] ata4.00: status: { DRDY }
[137392.910135] ata4: hard resetting link
[137393.440060] ata4: SATA link........
I've only used it on Centos, soI thought I'd make a quick Debian guide:
Install the DRBD Package
apt-get install drbd8-utils
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libswfdec-0.8-0
Use 'apt-get autoremove' to remove them.
The following........
hdparm -B 255 /dev/sdb
/dev/sdb:
setting Advanced Power Management level to disabled
HDIO_DRIVE_CMD failed: Input/output error
The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well).
-S set standby (spindown) timeout
hdparm -S 251 /dev/sda
/dev/sda:
setti........
Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive.
This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series.
To make it worse this is also when Western Digital introduced "Advanced Format" o........
My LOG is flooded with those messages many times per second.
I don't know what is wrong with heartbeat, but restarting the service fixed it.........
[27969.398749] sd 5:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
[27969.398749] sd 5:0:0:0: [sdb] Write Protect is off
[27969.398749] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[27969.398749] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[27972.117543] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[27972.117543] ata6.00: irq_stat 0x48000000
[27972.117543] ata6.00: cmd 60/08:00:ff:7........
This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason?
[655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........
http://www.tomshardware.com/news/RAID-5-Doomed-2009,6525.html
I found this article interesting, it basically says that with 2TB hard drives or larger sizes, you are more likely to encounter an unrecoverable read error. But is this just another Y2K doomsday? Don't HDD's have enough advanced hardware ECC error and read recovery to prevent this from happening?
I'm almost tempted to build a 3 x........
Here is a RAID 1 partition (500GB Seagate & 2TB WD):
Sequential Reads
File Blk Num Avg Maximum Lat%&nbs........
It always worked fine before but no amount of power unplugging/cycling does any good. I can access one network share and that is one that I've already saved, but it can't see any workgroups.
One silly thing is why is there no option to manually connect to a netbios name or IP?
It seems there is a bug with the firmware and that the SMB client is not working properly. Hopefully it fixes itself at some point.
Between this and the lack of support for embedded s........
This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel.
OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!)
# # # # # #&n........
This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART.
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device........
Seagate Inventory/Firmware Check
I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate.
*Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate!
Seagate Inventory/Firm........
Before we start I take no responsibility for this, you should have a backup and if you make a mistake during this process you could wipe out all of your data. So backup somewhere else before starting this as a precaution, or make sure it's data you could afford to lose.
The RAID 1 Setup (Hardware Wise)
I've already setup my 2 x 1TB (Seagate) drives with identical partitions, make sure your new hard drive (the empty one) is setup like your curr........
I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB!
I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition.
Here is what tune2fs tol........
I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find.
yum search ftp
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirrors.netdna.com
* updates: updates.interworx.info
* addons: yum.singlehop.com
* extras: mirrors.netdna.com
rpmforge........
heartbeat is stopped for some reason
Anyway hnode2 was active and the services are running fine but I see heartbeat has been stopped somehow.
Here is the last log I see of heartbeat:
[quote:23c84415f5]
Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: MSG stats: 9/1762471 ms age 0 [pid16738/MST_CONTROL]
Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: cl_malloc stats: 716/51784021 152624/74519 [pid16738/MST_CONTROL]
Sep 9 17:15:32........
PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist:
[code:1:1fd0f3abbe]
if (!file_exists($OPENSSL)) {
//echo "ERROR: OPENSSL $OPENSSL not foundn";
}[/code:1:1fd0f3abbe]
I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
Javascript Get a specified element using getElementById()Great, it produces the value for whatever "id" is passed to the function.
http://www.java2s.com/Code/JavaScript/Development/GetaspecifiedelementusinggetElementById.htm
[code:1:1287ede953]
function getElement(){
var x=document.getElementById("myHead........
JavasScript how to set or write value in id tagbla
I need to set a value inside that DIV tag using Javascript, how would I do it?Doesn't work for me:
[quote:c6b5f693a5]Warning: Element referenced by ID/NAME in the global scope. Use W3C standard document.getElementById() instead.
Source File: http://hosting.com/vps-order.html
Line: 19[/quote:c6b5f693a5]
[code:1:c6b5f693a5]........
Trouble connecting between Windows XP and Windows 98 SharesOk a few things to check for:
* Disable all firewalls
* Make sure NetBEUI is enabled on both computers
* Make sure the Windows XP computer has the name of the computer logged in user of Windows 98 added as an XP user
* Add the XP user to anything you want to share
That fixed my problem........
Backup Shell Script[quote:aaa4b0b165]#!/bin/sh
date=`date -I`
mysqldump --all-databases | gzip > /var/backup/backup-$date.sql.gz
[/quote:aaa4b0b165]
Something like that could be useful as a cronjob to locally or remotely backup your databases........
Basic Port ListingHopefully someone finds this useful or at least interesting.
http://www.sans.org/top20/#u9
Name Port Protocol Description
Small services ........
I was starting to panic because suddenly my 1TB Seagate SATA drive wasn't working,I thought it was a BIOS issue because it seemed to have happened after I tried overclocking my Desktop too much.
I tried powering down and waiting, but I still couldn't hear the drive spin up at all. I tried a second 1TB hard drive and it wouldn't work either. I checked all power connections again and again until one of the pins in the MOLEX connector popped completely loose.
Th........
Inever saved any of the logs, but basically no matter what OS (Linux)I used, I could not get my 1000GB hard drive to work (Seagate SATA). The BIOS recognizes the drive and fdisk -l shows the hard drive as it should.
The tricky thing is that different OS's will give you different results, but don't be fooled. You can't use these larger drives for long. Iwas getting all kinds of seek/IOerrors and also messages that the port could not be read.........
Itried everything Icould think of, and of course even with the NIC enabled in the BIOS nothing was working. The light would flash when you plugin the cable for a second, but that's all.
Due to another issue I'm about to post about (server is not compatible with 1TB/1000Gig Hard Drives), I updated the BIOS. I didn't even know the 100mbit NICs were not working untilI decided I should test each NIC one by one.
Inoticed that only 1 server out of........
Apple crippled the iPhone by not allowing multi-tasking of the non-primary apps. I use SSH a lot and I don't want to close my session just to check my e-mail, etc, now an app found in Cydia called "Backgrounder" allows just that.
Although it's not perfect, we installed the correct one for "3.x" iPhones and hit "Reload SpringBoard" and the hour/circle glass has just been going for minutes.
It seems like it installed fine even with the crash t........
When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it.
More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things.
Output of /var/log/messages for OCFS2
Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........
There's a lot of information and guides on OCFS2 for RHELand Centos Linux but the package setup and configuration is slightly different and this has thrown some people off.
Installing OC2FS
You should install the following packages to get started:
apt-get install ocfs2-tools ocfs2console
Configure OC2FS
In RHEL/Centos the main configuration file is located in /etc/sysconfig/o2cb
However in Debian based Linux it is located........