Uses:
Install OS on physical drive
Linux installation VMware
Install Windows on physical drive
Boot OS from physical drive
VMware Workstation tutorial
Linux virtual machine to physical disk
Windows to Linux migration
Dual boot OS installation
Boot from external SSD
Linux, Windows, BSD installation guide
Physical drive boot OS........
In a lot of distros, vdpau which accelerates video through the GPUis often not installed even in recent distros. This will result in Firefox with Youtube dropping frames when you check the "Stats for Nerds" and to the eye as jerky or slower video playback due to the dropped frames.
Some sites will say that because you are watching VP09 that there is no GPU support, but with vdpau installed and enabled, many GPUs will still be able to use hardware decoding for 4K........
This is a weird issue as sometimes when upgrading or even migrating, this could happen and the reason is simple but maybe not 100% obvious at first.
You will find that your GUIdoesn't load and most services fail to start, even logind
Here are some errors you may see:
Mar 13 22:22:23 rttbox systemd-logind[2892]: Failed to connect to system bus: No such file or directory
Mar 13 22:22:23 rttbox systemd-logind........
If you have swarm services and dockerd is creating a high load even with the containers just being idle, the easiest solution is to upgrade to a newer docker version.
For example an identical config of 3 nodes, with Redis 5 with 30 replicas produces a load of about 1.45 in Debian 10 with Docker18.09.1
If I create the same setup on Debian 11, with Docker 20.10.5+dfsg1 then the CPU usage is low.
One other difference I wondered is the kernel. In my test setup........
This should work for most console ports of other manufacturers too. It is a quick and simple method for emegencies or deploying a few appliances/devices in a non-standard environment or small environment.
However, if this is a route thing, or the equipment is not physically close to you, it would be best to use some sort of "Terminal" server which is an IP connected switch with several serial ports built-in for this purpose. Normally they accessible by web/........
A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version.
Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended):
Step 1 - Add the repo
apt-add-repository ppa:deadsnakes/ppa
If you get an error about requests then install it:........
This sort of thing normally happens your python3 or pip3 has been updated, because you have to in order to use pip, but the newer pip now breaks compatibility with your old python (3.5 in this case).
There are a few solutions, the easiest is perhaps to upgrade to a newer OS with a newer distro provided Python 3 or to manually install a newer version of Python/OR use a PPA like deadsnakes that provides newer versions.
........
The easiest way for the current running kernel is:
update-initramfs -u -k `uname -r`
You could change -k to a specific kernel name if for some reason the current is not running (eg. if you are chrooted or in recovery mode).
If you want to update all kernels then use "-k all"
update-initramfs -k all -u
update-initramfs: Generating /boot/initrd.img-5.4.0-162-generic........
Sometimes due to your BIOS/EFI you may find that you have chosen "Energy Efficient" for your CPU which may effectively disable turbo mode. This is because "Energy Efficient" will often restrict or throttle your CPU to the base speed. This can impact nearly any CPU such as Intel's, AMDs, Opteron, Xeon etc...
This is of course frustrating, for example if you have a CPU that is 2.0GHz base speed but turbo to 2.5GHz, you will never hit more than 2GHz.........
This error implies that there may be an issue with Xorg or maybe your NVIDIA GPU cannot start or initialize:
35 laptop kernel: [ 2031.857704] nvidia: loading out-of-tree module taints kernel.
35 laptop kernel: [ 2031.857724] nvidia: module license 'NVIDIA' taints kernel.
35 laptop kernel: [ 2031.857725] Disabling lock debugging due to kernel taint
35 laptop kernel: [ 2031.873280] nvidia: module verification failed: signature a........
The Best Docker Tutorial for Beginners
We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........
In our 2024 VPS Server/Cloud Buyer's Guide, we place the location of your VPS/hosting/server as one of the priorities that is often overlooked.
2024 Update - Datacent........
The key is that you need to know the passphrase to do it, if you don't know the password for the key then you can't remove the key since it cannot be decrypted.
ssh-keygen is the easiest method and openssl can be used to manually remove the key and output it to a new file, which you can then copy back over top of the encrypted file.
After that your public key authentication will work without any password prompt because it is no longer encrypted. Make sure you understand........
How To Install Wazuh Server / Quickest Installation
Wazuh (forked from the well known OSSEC project) is a full SIEM (Security Information Event Management) that works extremely well with the platforms it natively supports as an "Agent", which allows you to do scans of everything such as all processes running, CVE vulnerability check, incident reporting etc...
Prerequisites:
A lot of issues with Wazuh seem to be caused by i........
1.) gg and dG
The easiest way is to type "gg" to bring yourself to the first line of the file and the "dG" clears the contents.
2.) :1,$d
Hit Escape and colon and then type: 1,$d and all contents / lines of the file will be cleared.........
The problem is that Linux uses UTC and Windows uses the local time from the RTC. This means whenever you boot Linux or Windows and then go back to the other OS, you will find your time is incorrect because of the two different clock modes fighting.
This results in very annoying issues when booting between the two because the clock is set based on the different standards once you boot (eg. Linux UTC by default and Windows RTC). For example it may cause issues with fsck and........
In this case I am executing using "python3" but what you find in cases like this can be surprising.
The most common issues are that someone has a module for python 2 "pip" and doesn't realize they need "pip3" to install it for python3, but this is not one of those cases.
ModuleNotFoundError: No module named 'bs4'
OKmaybe we didn't install it for python3?
[........
The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration.
Let's manually play with vdpau to make sure it works before we make it permanent:
First make sure you have libvdpau installed:
sudo apt install vdpau-driver-all
If yo........
chroot which stands for change root allows you to virtually operate in another operating system even though you haven't booted it. It is commonly used to deploy new distros, applications and to fix a broken Linux/Unix install or prep a new system image without having to physically boot the drive or disk.
So in this example let's say we have a drive that has a Linux OS installed on /dev/sdb1 and we have mounted this partition on /mnt/sdb1
The key point is to edit the &quo........
When converting binary the easiest way is to write out a vertical list in a format like below and follow the formula in the table.
Example Convert 1101 1111 to decimal.
Step 1.)
Write out the binary below in vertical form (leave lots of space on the left side).
Keep this in mind that the "previous sum" starts at 0 on your first line.
Step 2.)
Formula:
2 *........
sudo chmod 000 /etc/cron.daily/apt-compat
This is the easiest way to disable the cron without anything more invasive like deleting the file.
After that you won't have anymore apt-get's starting.
This can be critical for systems without much extra RAMthat is not in use. I've seen systems that have swapped and crashed over apt-get.........
Getting this error on Centos 6 with PHP 5.3 when just running "php -v"
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/module.so' - /usr/lib64/php/modules/module.so: cannot open shared object file: No such file or directory in Unknown on line 0
PHP Warning: Cannot load module 'XCache' because conflicting module 'apc' is already loaded in Unknown on line 0
Solution:........
The easiest way is to use SSHand DD or a combination of netcat. SSHwill be a little slower due to encryption but is the most secure way (on two older systems the average clone speed is about 40-50MB/s). This is also OS independent as it doesn't matter what the source OS is because you are literallly cloning the drive so you retain the partition table and settings.
Clone HDD using SSH and DD........
The easiest way to recover or mount an off-line ecryptfs directory is the built-in command from ecryptfs
sudo ecryptfs-recover-private It will find your wrapped passphrase and ask for your password and mount it in tmp. Much easier especially when your current active OS is using ecryptfs too.
This a fantastic tool when going through old backups.........
Done on Centos 7.3 very important as clearly based on older guides it was a lot easier and more simpler! Hint do not use grub2-install!
If you have trouble booting after this check this CentOS mdadm RAID booting/fixing guide.
One huge caveat if you are an oldschool user or sysadmin who has avoided UEFIbooting
The nor........
Just make sure you have php-xdebug installed and edit your php.ini:
[xdebug]
xdebug.profiler_enable = 0
xdebug.profiler_enable_trigger = 1
xdebug.profiler_output_dir = "/tmp/xdebug/"
xdebug.output_name = "cachegrind.out.%t-%s"
Also make and set permissions on /tmp/xdebug:
mkdir /tmp/xdebug
chmod 777 /tmp/xdeb........
Cannot register the hard disk '/media/Debian8.vdi' {d01efabc-aacf-4614-b29c} because a hard disk '/home/VirtualBox VMs/Debian/Debian8.vdi' with UUID {d01efabc-aacf-4614-b29} already exists.
This is what happens if you move the VDI to another location.
The easiest way is to delete/remove the machine from VBOX and then reimport it from the new location.........
sed is the easiest way and you just specifiy the line number with the "-n #p" file.txt
So for example below 2p means print the second line of names.txt
sed -n 2p names.txt
What Are you Looking At, Mr. Bear?........
First of all if you're getting this error it is a result of extreme database activity. If you aren't expecting it or it doesn't make sense to you 99% of the time this is a database driven script being exploited (some common examples I see often are things like phpBB being hit by dozens, hundreds or thousands of bots making constant DB write requests).
The easiest way to identify this is to restart MySQL and then run the third party tool "mtop" and you'll see all........
Jul 11 15:20:58 tor sendmail[9617]: r6AKjOD07: to=
mailserver.com was the hostname of the server, sendmail sends this by default and many mailservers will reject mail to a hostname that does not resolve or exist.
The easiest way is just to change the hostname and make sure it does resolve to something.
I read there is a way in sendmail.mc to manually set a hostname but I never got it working:
vi /etc/mail/sendmail.mc
define(`confDOMAIN........
Shortcut/Easiest Way To Create A Self-Signed Key:
openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key
Using the above, you instantly create a self-signed certificate valid for 1530 days and you can simply skip to step #5.) below.
If You Need a Real SSLCertificate (eg. Equifax/Openssl) then you need to create a CSR request (you'll need to follow Steps 1.) and 2.) in order to create the CSR. You then upload the CSR Certi........
Igot this after copying a VMWare image onto another machine in Debian.
SIOCSIFADDR No such device eth0 error while getting interface flags
The solution
1.) Find and edit the device line in persisent-net.rules note it will be prefixed with something like z25 or something else.
vi /etc/udev/rules.d/z25_persistent-net.rules
The easiest way is to comment anything out.
If you are feeling........