• Virtualbox Best Networking Mode In Lab/Work Environment without using NAT Network or Bridged


    Virtualbox is a very powerful tool, but for some use cases it is less than optimal. Say you are in a work, lab or other environment where you are not alone on the physical network and there could be overlap of IPs, but you need all of your VMs to be contactable from your host, VMs need to communicate with each other, and VMs need internet. NAT Network will give you VM to VM communication and internet, however, it is buggy and unstable. It also doesn't allow host to VM co........
  • iptables NAT how to enable PPTP in newer Debian/Ubuntu/Mint Kernels Linux


    Remember that control connections are established on port 1723 and then actual data is transferred over GRE protocol 47. If you have a NAT setup this will work without special forwarding or accepting of GRE packets (normally if you are not blocking outgoing connections and accepting established and related connections). The below two commands will get things going so PPTP and GRE work We first load the ip_nat_pptp module which allows PPTP to work with........
  • br0: received packet on bond0 with own address as source address Linux Solution Mint Debian Redhat CentOS bridge bridging


    A quick fix is to run this command: sudo brctl setageing br0 0 This causes the aging of the MAC address to time out immediately or in 0 seconds, which delete the entry frmo the FDB (Forwarding Database) and causes the error to go away. The default time is 300 seconds or 5 minutes. You can also add it under your br0 definition like this in /etc/network/interfaces to make it permanent and automatic: auto br........
  • How To Do Linux Network Bonding Teaming in Mint Debian Ubuntu


    Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows. There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........
  • Docker Tutorial HowTo Install Docker, Use and Create Docker Container Images Clustering Swarm Mode Monitoring Service Hosting Provider


    The Best Docker Tutorial for Beginners We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........
  • How To Create OpenVPN Server for Secure Remote Corporate Access in Linux Debian/Mint/Ubuntu with client public key authentication


    Why choose OpenVPN instead of a firewall appliance? OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time. When comparing OpenVPN with traditional firewal........
  • Virtualbox VBOX Howto Port Forward To Guests


    NAT Network, the VMs can communicate but your host cannot access them by default. NAT VMs have internet but cannot communicate with each other. Bridged is simple and allows full LAN access as if you had a physical machine plugged in but is often bad for testing, work or corporate environments and is not very portable when it comes to moving your VMs to other locations and networks. Here is how you can use NAT Ne........
  • proxmox vm networking breaks when you restart your network on the hostnode


    Idid a systemctl restart networking and it broke Proxmox VM connectivity! #proxmox is the problem after restarting the network the tap devices go to disabled state [2230884.919905] vmbr0: port 7(tap118i0) entered disabled state [2230884.948864] vmbr0: port 8(tap122i0) entered disabled state [2230884.972748] vmbr0: port 6(tap119i0) entered disabled state [2230885.004745] vmbr0: port 5(tap117i0) entered disabled state [2230885.03673........
  • SSH error cannot Forward or Listen "bind: Cannot assign requested address"


    debug1: Local connections to LOCALHOST:18006 forwarded to remote address 192.168.1.93:8006 debug1: Local forwarding listening on 127.0.0.1 port 18006. debug1: channel 0: new [port listener] debug1: Local forwarding listening on ::1 port 18006. bind: Cannot assign requested address What we are seeing is that we can't listen on an IPV6 address of ::1. We need to tell SSH to stop using IPV6 so we'll edit ssh_config to take care of this issue........
  • X11 SSH Linux Forwarding Error


    Jan 30 17:16:10 localhost sshd[25385]: error: Failed to allocate internet-domain X11 display socket. The solution for me on the server side was the following in sshd_config: AddressFamily inet *Remember to restart sshd and also reconnect from the client side. Ihad all the normal X11 settings on the server but it just stopped........
  • kdenlive - No LADSPA plugins were found! Check your LADSPA_PATH environment variable. [producer_xml] failed to load transition "qtblend"


    This happens if you are running a kdenlive script from the shell of a remote machine without using SSH "-X" forwarding and it will also cause any areas where you write text to be a white screen for that duration. melt FusionFestival.kdenlive No LADSPA plugins were found! Check your LADSPA_PATH environment variable. [producer_xml] failed to load transition "qtblend" [producer_xml] failed to load transition &q........
  • Avocent DSR8020 KVM/IP - Network Connect Error - Solution


    This error is commonly due to Java security or TLS settings but there is a second issue with forwarded ports that also causes it. 1. Java Security/TLS Settings issue: This article has the solution to change them all in Linux automatically 2. Port Forwarding Issue if your Avocent DSR is behind NAT/private IP........
  • iptables how to forward localhost port to remote public IP


    iptables -t nat -A OUTPUT -m addrtype --src-type LOCAL --dst-type LOCAL -p tcp --dport 3306 -j DNAT --to-destination ip.ip.ip.ip iptables -t nat -A POSTROUTING -m addrtype --src-type LOCAL --dst-type UNICAST -j MASQUERADE sysctl -w net.ipv4.conf.all.route_localnet=1 Make sure you substitute "ip.ip.ip.ip" for your real public IP and also the "--dport 3306" for the port you want to forward. Finally run the sysctl command and........
  • Linksys PAP2T No Dialtone and Cannot Hear Caller


    I have two lines on my PAP2T and the only thing that solved this problem rather instantly was to change the line with the problem to using port 5060 instead of 5061 (so both lines are using port 5600). Note that I am not forwarding either port in my router either. Some of the symptoms of this problem for me were the following: No dialtone or it would take several tries. You answer a call but the phone keeps ringing (takes a few times t........
  • iptables port forwarding multiple ports to another IP


    iptables -t nat -A PREROUTING -p tcp -m multiport --dports 80,443,2068,8192 -j DNAT --to-destination 192.168.1.175 Just adjust the "--dports" to the ports you need and the --to-destination to the destination IP (note it must be on the same network as the server running iptables........
  • Telus + 2Wire 2700 Router Horrible


    Telus + 2Wire 2700 Router HorribleWell first of all let me say this is the only router/switch that sometimes seems to crash/disconnect computers on the local network. This device also thought it would be smart to block VOIP packets coming from my Sipura ATA VOIP adapters so I disabled the [quote:cb89ba7bff]"Invalid TCP Flag Attacks (NULL/XMAS/Other)"[/quote:cb89ba7bff] option Then all of a sudden I couldn't get onto any web pages, the wireless........
  • E-Mail Tip


    E-Mail TipI just thought I'd give you guys a good tip about e-mail. It seems a lot of people like to use a Hotmail or ISP (eg. Telus) account for their e-mail but the problem is what happens if you switch ISPs, then your e-mail address no longer works and old friends might not be able to contact you. The same thing has happened for excite.com e-mail addresses where they just shut down. Whether you are a business owner or personal user can you afford to lose an e-mail........
  • Latest Articles

  • How To Stop DNSMasq from listening on all IPs/Interfaces and allow only localhost
  • du - VAS Billing Subscriptions Hack/Scam MLPremiumSub Invascom Astromart Issues Complaint
  • Docker Swarm vs Kubernetes Comparison Guide
  • When is it time to leave your VPS/VDS Cloud Hosting Provider?
  • 2024 Buyer's Guide: How to Choose and Buy the Best VPS/VDS for Your Needs - Tips and Strategies
  • Postfix / sendmail config for DKIM, SPF and DMARC Tutorial Guide E-mail Delivery for Hotmail.com Gmail.com and More HowTo
  • Install Grafana on Linux Debian Ubuntu Tutorial Guide
  • How To Completely Disable ufw in Linux Ubuntu Mint Debian
  • System has not been booted with systemd as init system (PID 1). Can't operate. Failed to talk to init daemon. Ubuntu Debian Linux Solution Cannot reboot
  • Mint Ubuntu Linux Gnome Showing Home Directory on Desktop instead of Desktop Directory
  • vi vim not doing code highlighting E319: Sorry, the command is not available in this version solution
  • Proxmox How To Rename Node Hostname Fix Solution
  • Linux how to get list of all timezones on system Ubuntu
  • Proxmox install issue cannot see the buttons or install wrong / bad resolution cannot see the entire screen problem solution
  • configure.ac:75: error: possibly undefined macro: AC_PROG_LIBTOOL If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. solution
  • Can't exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 326. autoreconf: failed to run aclocal: No such file or directory solution
  • /bin/sh: autoreconf: command not found solution
  • glib-2.0 required to compile QEMU solution
  • How To Upgrade Debian 8,9,10 to Debian 12 Bookworm
  • Linux dhcp dhclient Mint Redhat Ubuntu Debian How To Use Local Domain DNS Server Instead of ISPs