Since newer versions of Ubuntu like 20, you will find there is no longer dynagen and that the dynamips provided is faulty and will segfault each time:
Cisco Router Simulation Platform (version 0.2.14-amd64/Linux stable)
Copyright (c) 2005-2011 Christophe Fillot.
Build date: Apr 3 2018 12:20:29
Local UUID: 3c1c0b7f-2fab-4fda-b40b-74841d1bcfe0
Instance ID set to 1.
netio_tap_create: unable to open TAP device tap1 (No such fi........
apt install tftpd-hpa
#change TFTP_ADDRESS to by setting address to 192.168.1.1:69 or the IP you need, otherwise it will listen on all IPs and interfaces which could be a security risk.
# edit /etc/default/tftpd-hpa
TFTP_USERNAME="tftp"
TFTP_DIRECTORY="/srv/tftp"
TFTP_ADDRESS="192.168.1.1:69"
TFTP_OPTIONS="--secure"........
sysctl vm.overcommit_memory=1
echo never > /sys/kernel/mm/transparent_hugepage/enabled
echo 511 > /proc/sys/net/core/somaxconn
1:M 26 Nov 2023 21:34:33.840 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
1:M 26 Nov 2023 21:34:33.840 # Server initialized
1:M 26 Nov 2023 21:34:33.840 # WARNING overcommit_memory is set to 0! Background sa........
Assign way more replicas than you have of memory on all nodes and watch the Swarm crash which can easily reproduce in a small VMfor testing.
root@Deb11Docker01:~# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAM........
This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525.
Then nvidia-modeset goes to 100%
There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines.
https://forums.de........
If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing.
The above results in this less than obv........
Remember that control connections are established on port 1723 and then actual data is transferred over GRE protocol 47.
If you have a NAT setup this will work without special forwarding or accepting of GRE packets (normally if you are not blocking outgoing connections and accepting established and related connections).
The below two commands will get things going so PPTP and GRE work
We first load the ip_nat_pptp module which allows PPTP to work with........
1.) Make sure your conf register is 0x2102
Do show version and at the very end of the output you will see the Configuration register.
show version
Configuration register is 0x2102
If the config register is not 0x2102 then enter this command:
r1#configure terminal
r1(config)#config-register 0x2102
r1(config)#end
2.) Let's Erase the NVRAM/flash........
It may appear to be an Xorg or lightdm/gdm/mdm error but in reality for many users with this issue, it's a driver conflict and issue. I had a system that had two GPUs, an Intel and Nvidia GPU.
The only thing that got it working was to remove the nouveau driver and blacklist it so it never came back, then the Intel GPU works fine without these issues.
Solution
sudo rmmod nouveau
add nouveau/other driver to blacklist
edit th........
This error implies that there may be an issue with Xorg or maybe your NVIDIA GPU cannot start or initialize:
35 laptop kernel: [ 2031.857704] nvidia: loading out-of-tree module taints kernel.
35 laptop kernel: [ 2031.857724] nvidia: module license 'NVIDIA' taints kernel.
35 laptop kernel: [ 2031.857725] Disabling lock debugging due to kernel taint
35 laptop kernel: [ 2031.873280] nvidia: module verification failed: signature a........
(firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory)
ExceptionHandler::GenerateDump cloned child 9743
ExceptionHandler::WaitForContinueSignal waiting for continue signal...
ExceptionHandler::SendContinueSignalToChild sent continue signal to child
[Parent 9562, Gecko_IOThread] WARNING: pipe error (40): Connection reset by peer: file /build/firefox-EymEXX/fire........
The Best Docker Tutorial for Beginners
We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........
1. Let's work from an environment where we can install Ansible on.
If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way:
sudo apt install gpg
sudo add-apt-repository ppa:ansible/ansible
sudo apt update........
Enable "cli" mode equivalent in JunOS
cli
Configure Mode
configure
So rather than going to the console on a Cisco switch and typing "enable" and then "conf t", the equivalent in JunOS is "cli" and "configure".
How Do You Apply Changes You've Made?
You can make all kinds of changes to the switch, but remember they are not........
Traditionally kernels were numbered starting from 0 but by default the "new style" of grub boot loading considers each subkernel item to be different so if you have 3 entries for 4.40-148 rather than counting for 1.
To get the expected behavior let's show this example and how we can boot it
We do a grep on menuentry in /boot/grub/grub.cfg to see all of the bootable kernels rather than scrolling through loads of extra entries we don't care about (thou........
I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules.
One other weird thing is that sometimes........
By default bind will not respond to outside queries for security reasons.
In most distributions you will find the default in /etc/named.conf looks like this at the top under options:
listen-on port 53 { 127.0.0.1; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";........
Install Errors on Version 12:
This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5
on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error.
*Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install.
What really causes this even though you successfully install........
The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs.
qemu-kvm command:
/usr/libexec/qemu-kvm -version
QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard
........
Ihave a directory structure which the primary user needs full access on but wanted a user to access only a specific directory within the main directory (so they could write in there only and nowhere else).
Here's what Idid:
[root@compevo8001 dllnow]# ls -alh
drwxrwxr-x 2 someuser software 4.0K Oct 19 2017 ExpireYMD-2017-11-20
drwxrwxr-x 2 someuser software 4.0K Nov 19 2017 ExpireYMD-20........
#Linux Mint 18.2 how to install gajim .16.9 so you can use OMEMO encryption:
sudo apt-get install python-axolotl python-nbxmpp
wget https://gajim.org/downloads/0.16/gajim-0.16.9.tar.gz
tar -zxvf gajim-0.16.9.tar.gz
cd gajim-0.16.9
./autogen.sh ;make;sudo make install
#if you get this error you need to get a newer python-nbxmpp from here:
gajim
Gajim needs python-nbxmpp >= 0.6.1 to run. Quiting...........
[root@localhost:~]
BootModuleConfig.sh echo host-ind nfcd........
top - 13:02:52 up 603 days, 19:19, 2 users, load average: 5.01, 4.15, 3.44
Tasks: 604 total, 5 running, 599 sleeping, 0 stopped, 0 zombie
Cpu(s): 17.7%us, 36.1%sy, 0.0%ni, 42.0%id, 4.1%wa, 0.0%hi, 0.2%si, 0.0%st
Mem: 16278908k total, 4269684k used, 12009224k free, 119672k buffers
Swap: 8k total, ........
We all know Linux is known for good memory management but is it really? It seems all on its own with hardly anything running that you can come back in days or weeks and find that almost all of your RAMis used!
And many will say "no don't worry it's buffers for optimization" but it doesn't seem to help because what is in buffers is not available to use for new programs running or ones that allocate more RAM as far as Ican tell.
The reason Iknow........
#if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used
wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2
tar -jxvf ffmpeg-3.3.2.tar.bz2
cd ffmpeg-3.3.2/
./configure --disable-yasm
install prefix /usr/local
source path ........
This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether.
Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........
When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help).
At first cudaminer will give you these errors:
stratrum_recv_line failed
...retry after 15 seconds
GPU #0: Geforce 210 with compute ca........
Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user:
Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4
Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........
These errors believe it or not are simply because of not being the root user or running with sudo! However if you didn't know to try as root you'd think there was a problem with your burner or disc Essentially it looks like without root you cannot send the required scsi commands to continue writing. Ithink cdrecord should have built-in tests or safeguards to see if it has the permissions to run the required commands.
I guess for more advanced users the idea is simila........
gpick is a great and simple tool now that I now how to use it
sudo apt-get install gpick
The trick is to find "the swatch"
I was in a rush and was frustrated that it wouldn't work how Iexpected and I had to memorize the hex code of the color my mouse was over.
There is something it tells you to do which is "Click on the swatch area" (click onthe honeycomb graphic area that is the s........
In short the solution is just to use vgremove for the actual /dev/mapper device:
vgremove /dev/mapper/backups-backuplv
box mnt # mdadm --manage /dev/md8 --stop
mdadm: Cannot get exclusive access to /dev/md8:Perhaps a running process, mounted filesystem or active volume group?
box mnt # lv
lvchange lvconvert lvcreate l........
Many users still are not aware but simply patching OpenSSL does not secure you against many known and easy to exploit attacks that will render your encryption useless by an attacker.
Use the following setings in /etc/httpd/conf.d/ssl.conf
SSLCipherSuite "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH EDH+aRSA !CAMELLIA !SEED !3DES !RC4 !aNULL !eNULL !LOW !MD5 !EXP !PSK !........
The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files.
UPDATE user SET password=password("newpass") WHERE user='root';
flush privileges;
ERROR 2013 (HY000): Lost connection to MySQL server durin........
Tired of checking iotop and seeing that your drbd partition is using 99.99% of io all the time and finding your drbd device performs slow in general?
This is especially an issue in versions of DRBD in the 8.3 tree in particular one documented case is on "8.3.13" but it likely applies to other devices.
The symptoms are that resyncing is fine and normal but any reasonable amount of activity is very slow and lagged and creates a high server load and con........
migrating from an old OpenVZ (Centos 5) to new OpenVZ (Centos 6)
Also if migrating from 32-bit HN to 64-bit your RAM will probably be much bigger than it should be!
16x bigger
eg. 32bit HN:
total used free shared buffers cached
Mem:&nb........
This happened while an mdadm array was syncing, all access from writing a new blank file to opening a small .txt file was very slow:
[222117.312078] kjournald starting. Commit interval 5 seconds
[222117.685060] EXT3-fs (md0): using internal journal
[222117.685096] EXT3-fs (md0): mounted filesystem with ordered data mode
[222122.376847] kjournald starting. Commit interval 5 seconds
[222122.602825] EXT3-fs (md2): using internal jour........
There was only one solution here and it was the following:
edit /etc/httpd/conf/httpd.conf
Comment the lines for the Mime Magic Module:
# MIMEMagicFile /usr/share/magic.mime
# MIMEMagicFile conf/magic
*Don't forget to restart Apache and clear your browser cache twice
I was using DefaultType and ForceType a........
Stopping httpd: [FAILED]
Starting httpd: httpd: Syntax error on line 73 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared obje........
Message from syslogd@server at Sep 14 11:35:59 ...
kernel:[Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
Message from syslogd@server at Sep 14 11:35:59 ...
kernel:[Hardware Error]: Error Status: Corrected error, no action required.
Message from syslogd@server at Sep 14 11:35:59 ...
kernel:[Hardware Error]: CPU:6 (10:8:0) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc00400021080813........
Phoenix phlash error
Cannot flash when memory managers ( e.g. HIMEM) are present.
press any key to exit.
Use the "/x" option to get past the above
........
-------------------------------------
ProCurve J4903A Switch 2824
Software revision I.10.77
Copyright (C) 1991-2009 Hewlett-Packard Co. All Rights Reserved.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to restrictions........
No response from subprocess (whostmgr (whostmgr)): The subprocess exited with status 12 (ENOMEM).
This happened on a client's VPS which ran out of memory.........
I'm not sure why I'm getting these but all memory modules are the exact same and all passed memtest successfully although they are ECC. I've heard that ECC RAM can't be tested as well and the kernel seems to indicate they are non-fatl recoverable errors. I wonder if the BIOS has aggressive RAM timing or maybe the controller or motherboard is bad.
[ 12.716515] EDAC MC: Ver: 2.1.0
[ 12.717771] EDAC MC0: Giving out device to........
This server has been running for weeks without issue, it's currently only using 1 of 2 CPUs as it is running in the office as a test bed (mainly due to the handle 12 bay storage/great for testing HDDs). The errors below seem to mainly be from AMD CPUs, it's only happened a single time and in the days since Igot that error it hasn't occurrred.
Interestingly enough /proc/cpuinfo still shows all 4 cores of the CPU (Opteron 2373 Quadcore HE) and the functionality doesn't seem........
Here is a handy script that will check all processes and report what is swapping
#!/bin/bash
for pid in `ps x|awk '{print $1}'`; do
result=`cat /proc/$pid/status|grep VmSwap|awk '{print $2}'|grep -v ^"0"`
if [ ! -z "$result" ]; then
programresult=`ps x|grep $pid|grep -v grep`
if [ $? == 0 ]; then
program=`echo $programresult|awk '{print $5}'|grep -v ^grep`........
mount -o bind /proc /sda2/proc
mount -o bind /dev/ /sda2/dev
mount -o bind /sys /sda2/sys
chroot /sda2
mint / # mount -o bind /proc /sda2/proc
mint / # mount -o bind /dev/ /sda2/dev
mint / # mount -o bind /sys /sda2/sys
mint / # chroot /sda2
mint / # cd ~
mint ~ # ls
Desktop
mint ~ # cd /
mint / # ls
bin Desktop dev-temp home&nb........
Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux
even setting privvmpages to a specific setting DOES not affect "free -m" in containers.
This is probably a kernel issue
23:36:29 up 159 days, 7:12, 4 users, load average: 0.42, 0.44, 0.33
[root@box13 ~]# free -m
total&n........
This is usually solved by two variables alone:
max_input_vars=5000
memory_limit=256M
Now you should be able to have unlimited amounts of custom menus in Wordpress.........
This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel.
I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk.
I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one).
This is strange but it seems like this Xen PV guest has some sort of hidden or........
Inever started these processes but they are from a custom based bootable Linux I've made and I've never seen this behavior on other machines or even with the same machine using different kernels. These processes seemed to spawn on their own and I have no idea why and even worse why the CPU usage is so high?
Here's the output from top:
907 extaudit 30 10 0 0 0 R 90.7 0.0........
This is something I often setup for clients because it's very helpful for people in datacenters, this allows custom OS installs on demand, you can customize it more by using kickstart etc.. but here's a base I use before customizing more:
This little script below will install everything you need to get booting by PXE Linux.
It also assumes you set a local IP (be sure not to overwrite your existing IP) on eth0:0 (note the :0) as 192.168.1.10 and it........
One of my test Centos 5 containers was on a partition that filled up and it threw all sorts of errors and stopped responding but now I can't boot it again anymore.
All the console shows is the Linux Penguin on the top left corner and the xm console says "usbcore: registered new driver hub" and has halted there.
Centos 5 Xen container stuck/frozen won't boot on "usbcore: registered new driver hub"
Another great way of troubleshooting is booting fro........
This is one in a series of weird things whichIthought was motherboard related (I RMA'd the motherboard), the RAM tests fine with memtest86 and I used badblocks on both RAID 1 members with no errors and smartctl is happy with them.
Basically the array crashes the kernel a lot and has issues when writing.
[112322.723465] md0: rw=0, want=14958668696, limit=1887460480
[112322.731077] attempt to access beyond end of device
[112322.731087] md........
It really is as simple as:
cdrecord -v dev=/dev/sr0 pathtoyourisoimage.iso
-v is for verbose, I prefer it but if you don't you won't see as much output like below (I like to know the details and exactly what's happening)
dev=/dev/sr0 specifies the device name of your burner (they say not to use it and to specify some weird annoying device string but using the raw /dev has always worked for me and is how it should have been implemented from the start IMHO)........
These were caused by a bad stick of Corsair RAM
[] free_hot_cold_page+0xfc/0x150
[] __pagevec_free+0x14/0x1a
[] release_pages+0x127/0x12f
[] __pagevec_release+0x15/0x1d
[] __invalid_mapping_pages+0x120/0x156
[........
I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM.
I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives?
Also no swap space was ever used!
cat /proc/s........
I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem:
We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though.
There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........
You need to enable the httpd daemon with monit to actually view the status and control, it's not only for the web interface since the httpd is theONLY way of controlling monit and viewing the status.
monit monitor all will also reinstate disabled services if they've timed out too much. Just restarting the service will do nothing to re-monitor a service that monit has stopped monitoring due to too many failures.
*Also note that /etc/monit.conf i........
Openvz problem, it is confusing because it's an inode issue and there is enough free space.
cp: cannot create regular file `forums/memberlist.php': Disk quota exceeded
/dev/simfs 60G 20G 41G 33% /
none 2.0G 4.0K 2.0G 1% /dev........
CPU/Kernel/MB/RAID problem?
Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168]
Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........
Login as Admin
Languages & Phrases -> Search in Phrases
Choose "Phrase Variable Name Only"
Search for: welcomemail
Edit the "Translation" box with what you'd like in it.........
Remember to replace "eth0" with your NIC device although usually it will be eth0.
Replace 192.168.1.1 with your default gateway, remember you can also add multiple gateways by adding a second/different default gateway.
route
Kernel IP routing table
Destination Gateway Genmask&nb........
This server was experiencing loads of up to 80 and maxing out the RAM and kmemsize on a CPanel VPS. There were literally dozens if not hundreds of exim processes. I have no idea why exim has such a design that would allow it to consume this much CPU and RAM. Any normal MTA should not be spawning so many processes, it should be processing them in sequence and if it is going to spawn hundreds of processes in response to a large volume of mail, it's better to have a delayed del........
I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project.
Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is.
I just want to a directory that had the MP3's I wanted t........
This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason?
[655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........
skipping non-regular file "mnt/lib/udev/devices/console"
skipping non-regular file "mnt/lib/udev/devices/kmem"
skipping non-regular file "mnt/lib/udev/devices/loop0"
skipping non-regular file "mnt/lib/udev/devices/null"
skipping non-regular file "mnt/lib/udev/devices/ppp"
skipping non-regular file "mnt/lib/udev/devices/net/tu
Solution for skipping non-regular file
You need the -D........
cat /proc/user_beancounters produces the following:
kmemsize 1861537 5139870 12752512 12752512 26965041
Notice the failcnt "26965041", that is for kmemsize and at first it confused me. The system had enough guaranteed and enough burst RAM available. kmemsize is a variable indepedent of that, but who cars about the explanation right, let's just make thing........
I took an educated guess because it kept happening at the same spot when loading the XP install. I thought it was the hard drive or motherboard.
But it turns out my heavily used but loved NEC 3500 DVD-RW drive was the culprit. After disconnecting it and swapping it for another much beloved Pioneer DVD-RW, everything has gone smoothly.
I never ran into this or many issues because I've hardly used this drive since moving it to another Desktop years ago. I actua........
Out of memory: kill process 7559 (rsync) score 635 or a child
Killed process 7559 (rsync)
I was surprised to see this in my dmesg whenmy rsync backup suddenly stalled/stopped.
This system has 3 gigs of RAM and lots of free memory so I don't understand what is happening.
rsync invoked oom-killer: gfp_mask=0x200d2, order=0, oomkilladj=0
Pid: 7600, comm: rsync Not tainted 2.6.24.2 #83
[] oom_kill_pr........
The folder I was trying to archive is about 72GB, but much like rsync at about 17GB it chokes because of the filesize. What's with so many common and essential Linux tools having such limitations? I guess it is likely that the authors never wrote their code with the idea that files would be so large but it's still very annoying. It's important to stay on top of these limitations on production servers because I didn't realize what happened until I checked the file with "........
I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find.
yum search ftp
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirrors.netdna.com
* updates: updates.interworx.info
* addons: yum.singlehop.com
* extras: mirrors.netdna.com
rpmforge........
Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics.
# # # # # # # ##### ###### # # #### # #
# # ## # # # #&nb........
Upgrade Release Kernel TipsThis is for CentOS 3.1 to 3.8 but the methodology will apply everywhere.
I ran into a problem first of all with a non-booting system after running
#yum update centos-release
It took me to 3.8 and upgraded all the other packages [b:7e931c835d]BUT[/b:7e931c835d]
because of some stupid flags enabled in /etc/yum.conf the KERNEL WASN'T UPGRADED SO AFTER BOOTING, WELL IT DIDN'T BOOT OF COURSE :)
H........
CDR Manufacturers - Why is so much media bad?I have searched for good media and tried many kinds for years. I guess I'll try to summarize my findings and conclusions.
Dye is irrelevant, dye of any color can be good or bad, it more likely depends on the manufacturer.
Speaking of manufacturers, the name at the top of the disc means nothing. For example, Memorex along with any other 'brand' is actually always made by another manufaturer including CMC Mag........
Other Security Web SitesSeveral websites actively track security issues. This list provides you with the major providers
of security information on the Web. Many of these organizations also provide newsletters and
mailings to announce changes or security threats:
Center for Education and Research in Information Assurance and Security (CERIAS)
CERIAS is an industry-sponsored center at Purdue University that is focused on technology and
relate........
A VPS Server I had just wasn't working right, code that I migrated there just wasn't working. For example, it kept telling me the connection to the database was unsuccessful, halfway through iterating through results it already had.
Then I realized it wasn't my code. Ichecked my /proc/user_beancounters and found this:
cat /proc/user_beancounters
Version: 2.5
uid resource held maxheld barrier limit failcnt........
The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso
I'll only cover theLinux version although the Windows pre-built binary works the same way.
Download dmg2iso here for free (from the author's website)
It's just silly and doesn't make sense that Ubuntu doe........