/ - rtt - IT Resource

  • How to download gajim 0.16.9 XMPP/Jabber client so you can use OMEMO encryption


    #Linux Mint 18.2 how to install gajim .16.9 so you can use OMEMO encryption: sudo apt-get install python-axolotl python-nbxmpp wget https://gajim.org/downloads/0.16/gajim-0.16.9.tar.gz tar -zxvf gajim-0.16.9.tar.gz cd gajim-0.16.9 ./autogen.sh ;make;sudo make install #if you get this error you need to get a newer python-nbxmpp from here: gajim Gajim needs python-nbxmpp >= 0.6.1 to run. Quiting...........
  • gvfs mount in /run/user cannot be accessed or displayed wrong permissions


    The folder contents could not be displayed Backend currently unmounting drwx------ 10 userhere group  260 Aug 23 19:40 .. ??????????  ? ?   ?      ?            ? sftp:host=192.168.8.80,user=adhoc ls: cannot access 'sftp:host=192.168.8.80,user=adoc': Input/output error $ ps aux|grep fuse one       253........
  • Centos 7 - How To Install NFS and Mount Remotely


    1.) First install nfs-utils [root@bcitcourse ~]# yum -y install nfs-utils Loaded plugins: fastestmirror base                                                         &n........
  • How To Install Windows Server 7 8 10 12 2008 2012 2014 2016 Servers Desktops using Linux tftp, dhcpd and samba


    It has been a big pain for a long-time to install Windows from a Linux environment.  I used to run a windows install server and it never worked right for some reason (the install would fail on most servers). Before getting start be sure to setup your samba share so once you boot into WinPE you can mount the install for whatever Windows you want /etc/samba/smb.conf [smbwinstall] path = /tftpboot/images/winstall guest ok = yes........
  • Centos How To Update to Glibc 2.14 Plus


    Centos 6 requires GLIBC 2.12 however a lot of new programs you would want to compile may need a newer glibc.  You can't remove the old glibc since the whole OS is based on it but you can install the updated glibc alongside it and do an export pointing to your updated GLIBC. mkdir ~/glibc_install; cd ~/glibc_install wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz........
  • Install Windows From a Linux TFTP Server instead of using WDS Solution


    yum -y install samba vi /etc/samba/smb.conf https://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-6.03.zip mkdir syslinux;cd syslinux;unzip syslinux-6.03.zip mkdir -p /tftpboot/libs/ cp bios/com32/modules/linux.c32 /tftpboot/libs/ cp bios/com32/libutil/libutil.c32 /tftpboot/libs/ cp bios/com32/lib/libcom32.c32 /tftpboot/libs/ #add lib path echo "PATH libs" >> /tftpboot/pxeli........
  • tftp: client does not accept options - solution if you are using UEFI PXEBoot disable it!


    tftp: client does not accept options I spent the good portion of a late evening on this double checking settings that I know always worked right for tftp! This error can also happen if you are trying to boot PXE in UEFI mode.  Enter your BIOS and change it to "Legacy PXE" or non-UEFI PXE mode and you'll be good to go!........
  • l2tp ipsec VPN Error Sep 12 18:16:25 vps pluto[7299]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 192.5.6.2 port 20640, complainant 192.5.6.2: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated


    Sep 12 18:16:25 vps pluto[7299]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 192.5.6.2 port 20640, complainant 192.5.6.2: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Some say changing the "leftprotoport=17/%any" will fix this but I have not found this to be the case. Essentially it means at least one end is blocking the ipsec packets.  Sometimes the %any allows an alt........
  • Centos 5.9 Working Vault Repo file


    Centos 5 is not supported running yum will produce an error like this: YumRepo Error: All mirror URLs are not using ftp, http[s] or file.  Eg. Invalid release/ removing mirrorlist with no valid mirrors: /var/cache/yum/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base Solution - Update this file CentOS-Base.repo   # CentOS-Base.repo........
  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd  ffmpeg-3.3.2/ ./configure --disable-yasm install prefix            /usr/local source path              ........
  • Linux Mint Install Netboot PXE Guide Howto


    *Update so this doesn't work it must be something to do with the path of nfs or something else but the installer fails with "Installer crashed" at the end whereas with the CD/USB it works. This assumes you've already installed and configured a separate PXE/DHCP server somewhere else and your /tftpboot directory is setup. This is for Linux Mint 18.1 but generally applies to most versions although you may have tro change things like "casper"........
  • PYCURL ERROR 22 - The requested URL returned error: 404 Not Found Solution


    # yum -y install qemu-kvm Loaded plugins: fastestmirror Setting up Install Process Loading mirror speeds from cached hostfile  * base: mirror.lzu.edu.cn  * elrepo: ftp.utexas.edu  * epel: ftp.jaist.ac.jp  * extras: mirrors.aliyun.com  * openvz-kernel-rhel6: mirror.fdcservers.net  * openvz-utils: mirror.fdcservers.net  * updates: mirrors.nwsuaf.edu.cn Resolving Dependencies........
  • Linksys E2500 DD-WRT Upgrade Instructions and Enabling 5ghz with Tomato Firmware


    1.) Flash directly to this file: http://tomato.groov.pl/download/K26RT-N/build5x-132-EN/Linksys%20E-series/tomato-E2500-NVRAM60K-1.28.RT-N5x-MIPSR2-132-Max.zip *I was never able to get the larger "Mega" file to work, at least not initially so I recommend the file above. To enable 5ghz I had to do the "Clear NVRAM" Option before it was shown. 2.) Or if you don't need 5ghz (most devices do not support it and cannot........
  • openvz yum problem Centos 6.5 cannot find file on mirror:


    #solution Edit /etc/yum.repos.d/openvz.repo For the first two entries comment out #mirrorlist and uncomment #baseurl and then it worked openvz yum problem Centos 6.5 cannot find file on mirror: yum update Loaded plugins: fastestmirror Determining fastest mirrors  * openvz-kernel-rhel6: mirrors.ustc.edu.cn  * openvz-utils: mirrors.ustc.edu.cn base      ........
  • OpenVZ Install Guide Again / Quick Setup


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl #enable ip_forward sed -i s/'net.ipv4.ip_forward = 0'/'net.ipv4.ip_forward = 1'/g /etc/sysctl.conf #all interfaces should not send redirects echo "net.ipv4.conf.default.send_redirects = 1" >> /etc/sysctl.conf echo "net.ipv4.co........
  • KVM/QEMU how to boot from direct kernel vmlinuz and initrd with networking


    Thsi is very handy when doing your own kernel development. -m specifies how much ram (in the example it is 768MB) -kernel specifies the path to the kernel file -net tap,ifname=tap1,script=no (the ifname=tap1 is what you need to change and setup manually). *Run "tunctl -b" to create a tap device and use the one it gives you for ifname= Enable networking to the outside like this: *Note we assume that your bridge is br0 i........
  • Centos scp or sftp program missing solution/what rpm provides them


    You need the "openssh-clients" package which contains sftp and scp. yum -y install openssh-clients........
  • Wordpress Plugin manual install how-to


    This is the most secure way since we don't know if using the built-in ftp method of Wordpress is secure (that is do they store, record or transmit the ftp login information to a third party like the NSA?). Upload or wget the plugin and then unzip it from the Wordpress website tot he following path of your wordpress: /yourwordpressinstall/wp-content/plugins Then navigate to the "Plugins" section on the left side o........
  • bash shellshock how to manually patch when there is no update for Centos/Debian/Ubuntu/Fedora


    wget http://ftp.gnu.org/gnu/bash/bash-4.3.tar.gz tar xzvf bash-4.3.tar.gz cd bash-4.3/ wget --no-directories --level 1 --recursive http://ftp.gnu.org/gnu/bash/bash-4.3-patches/ for patch in `ls bash43-*|grep -v .sig$`; do echo applying "$patch" patch -p0 < $patch done ./configure;make;make install #it will install to /usr/bin/bash but if your bash is somewhere else you need to overwrite the old one.........
  • CPanel Link to all of the command line options


    <p>CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting.&nbsp; I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts.</p> <p>So for people like me here's the list: <a href="http://cpanel.net/system-administrators/command-line-scripts/">http://cpanel.net/system-administrators/command-line-scrip........
  • Wordpress Security Hole, Plug it by manually installing themes and plugins


    It's always bothered me how Wordpress basically forces the user to provide their hosting credentials to install themes and plugins.  How do know for sure the data is not being saved, intercepted and being provided backdoor access to the NSA or other agencies or even just being misused by others with access? Here's how to close the security hole above and if you're already given Wordpress your credentials make sure you change everything associated it with it.  Eg. change your........
  • OpenVZ mismatched kernel and dev when compiling.


    ./configure ./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory Error: kernel version not found. Please make sure your kernel is configured. dr-xr-xr-x.  4 root root   4096 Feb 21 06:13 .. lrwxrwxrwx   1 root root     45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25 drwxr-xr-x   2 root root   4096 Feb 12 20........
  • OpenVZ Quick Install Copy & Paste for Centos 6


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl After that just reboot and you may also have to enable ip_forward in /etc/sysctl.conf........
  • pxe-32 tftp open timeout


    pxe-32 tftp open timeout   The solution was to enable tftp in xinetd with "chkconfig tftp on". See the troubleshooting below:   chkconfig --list NetworkManager     0:off    1:off    2:off    3:off    4:off    5:off    6:off acpid              0:off&n........
  • Directadmin Log File Locations


    This is a handy link and list of all the relevant Directadmin log files and related servers.   http://help.directadmin.com/item.php?id=11   DirectAdmin: /var/log/directadmin/error.log /var/log/directadmin/errortaskq.log /var/log/directadmin/system.log /var/log/directadmin/security.log Apache:........
  • Centos Net Install Format


    After booting the net install, eg. over tftp here's the format you need to install the OS when it asks for the URL: http://mirror.centos.org/centos-6/6.4/os/x86_64/ Obviously change the URL and path to match the architecture and version that you're looking for and you'll be good to go.........
  • Setup PXE Boot using Centos and dhcpd, tftp and syslinux


    This is something I often setup for clients because it's very helpful for people in datacenters, this allows custom OS installs on demand, you can customize it more by using kickstart etc.. but here's a base I use before customizing more: This little script below will install everything you need to get booting by PXE Linux. It also assumes you set a local IP (be sure not to overwrite your existing IP) on eth0:0 (note the :0) as 192.168.1.10 and it........
  • iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) - OpenVZ Container Problem iptables module problem solution


    iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) This solution applies to all other iptables modules/problems for OpenVZ, you'll just need to add them to both lists/lines below if you have modules other than what I have below. The modules need to be enabled in both iptables and the OpenVZ hostnode itself and then the containers which need it must be restarted. How To Enable IPTables Modules in OpenVZ........
  • HowTo Migrate and Import iPhone/Outlook Contacts into Android without using GMail using .vcf files


    I searched for days after getting my Galaxy Note and couldn't find a way to do this (at least not without buying programs for either Android/Windows). All I read was ways to sync and import the contacts to GMail but I don't want to use GMail for privacy reasons.  GMail/Google steal all of your personal information and use it for whatever purposes they want to and may sell or release it to who knows where (I don't care what their policy says but this stuff happens), just like the default........
  • iPhone Restore/Backup Location of Notes and Contact/Address Book


    *Make sure that the ownership is 501.501 or mobile.mobile when copying back (especially if using ssh or sftp as root on the iPhone) otherwise things will break.  Eg. the contacts will be blank even after trying to update due to incorrect ownership/permissions. iPhone Notes Location/Restore: /private/var/mobile/Library/AddressBook AddressBookImages.sqlitedb  AddressBook.sqlitedb Once you restore the contacts and restar........
  • Install Android SDK and start testing on Debian/Ubuntu: How To Guide/Tutorial


    Visit http://linux.softpedia.com/get/Programming/Interpreters/Android-32340.shtml Basically copy and paste all of that below and you'll have installed and started the Android SDK before you know it. wget http://dl.google.com/android/android-sdk_r12-linux_x86.tgz sudo apt-get install openjdk-6-jre openjdk-6-lib openjdk-6-jre-headless tar -xvf android-sdk_r12-linux_x86.tgz cd android-sdk-linux_x86/tools ./android........
  • Openvz YUM Error Solution to "[Errno -1] Metadata file does not match checksum Trying other mirror."


    It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work. I only get this error with the openvz.repo and not others such as Centos-Base.repo With my other server it works normally: ================ Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........
  • Plesk Get List of E-mail Users & Aliases


    When migrating away from Plesk I couldn't figure out an easy way to get a straight list of all e-mails, but here is where I found the solution: http://nakuls77.wordpress.com/2008/08/30/details-of-email-ftp-database-users-from-psa-database/ mysql> SELECT mail.mail_name, accounts.password, domains.name FROM mail, accounts, domains WHERE domains.id=mail.dom_id AND mail.account_id=accounts.id; mysql> SELECT CONCAT(mail.mail_name,’@’,domains.name) AS Em........
  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM.  The only way to make it work was to disable i386 packages since this was an x64 kernel.  That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two.  I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........
  • Error: DBus error org.freedesktop.DBus.Error.ServiceUnknown: The name :1.1127 was not provided by any .service files Please select another viewer and try again.


    This is an SFTP mount that does not work or prompt for password. Error: DBus error org.freedesktop.DBus.Error.ServiceUnknown: The name :1.1127 was not provided by any .service files Please select another viewer and try again. It seems to me that the connection often times out after being opened and the application doesn't know how to handle the disconnection and doesn't realize it needs to kill the instance and restart the connection.........
  • How not to change an IP address in CPanel during a migration


    /usr/local/cpanel/bin/swapip <oldip> <newip> <ftpip> domain(s) It simply doesn't work, the Apache VHOSTS remain 100% unchanged, why does this script exist?   I'm sure it would work from the control panel but I am locked out because my IP was changed and it doesn't match the CPanel license.  I wish CPanel would make it easier to update the license IP. I even took it a step farther, I manually edited the vhosts and restarted Apache and it........
  • jailkit for chroot ssh account security tutorial and fix for error


    This was done on Centos but I think it's easier on Debian machines, the paths that it is set to use are tailored towards Debian, so there is some fiddling that needs to be done on Centos. This is for chrooting ssh, but jailkit has other uses than just SSH jails but I won't cover them in this writeup. 1. Install jailkit yum install jailkit 2. Setup Jail Home mkdir /home/jail chown root:root /home/ja........
  • FUSE/Curlftpfs mount ftp account as drive partition in Linux


    This is a great way to use your ftp server space, for example on your web hosting account (although I believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect.  Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc..   Name curlftpfs - mount a ftp host as a local directory Synopsis........
  • Linux Centos/RHEL can't find php/apache/httpd/mysql/ftp/exim/sendmail ?


    I wasted a lot of time wondering why I could never find those packages. Check the /etc/yum.conf file and at the bottom look for the "exclude=" line.  Below is what I found in mine exclude=apache* httpd* mod_* mysql* MySQL* da_* *ftp* exim* sendmail* php* bind-chroot* Just remove those entries or uncomment that line and you'll get access to the missing applications.........
  • Openvz Enable Most Common iptables modules


    The default options for iptables are very basic.  Here is what you need to do in order to enable them in OpenVZ. 1.) Add the modules to iptables and restart iptables: vi /etc/sysconfig/iptables-config Edit the line as so: IPTABLES_MODULES="ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp" 2.........
  • Picking an FTPD (vsftpd) Server in Linux Centos/Debian


    I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find. yum search ftp Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile  * rpmforge: ftp-stud.fht-esslingen.de  * base: mirrors.netdna.com  * updates: updates.interworx.info  * addons: yum.singlehop.com  * extras: mirrors.netdna.com rpmforge   ........
  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
  • Updating yum repos for DAG /etc/yum.repos.d


    Updating yum repos for DAG /etc/yum.repos.dIn /etc/yum.repos.d [quote:96456b2ab9]Create any file such as "CentOS-Dag.repo" in /etc/yum.repos.d[/quote:96456b2ab9] Add the following to the above file: [code:1:96456b2ab9] [dag] name=Dag RPM Repository For Red Hat Enterprise Linux baseurl=http://dag.atrpms.net/redhat/el$releasever/en/$basearch/dag/ http://dag.freshrpms.net/redhat/e........
  • Proftp Passive Ports


    Proftp Passive PortsIf you use a locked down firewall you can edit proftpd.conf and tell it something like this: [quote:8419cab1f8]PassivePorts 6170 6270[/quote:8419cab1f8] That would force all passive ftp traffic to ports 6170 6270 which you could then open on your firewall rather than leaving open ports 1024-65000 open........
  • Package management


    Package managementIf you're like me and often like using an older version you'll need to know this. Since all 5.x versions no longer have packages of their own you'll have to use the 5-stable The best way is to set the [b:d5e8972240]packagesite environment variable[/b:d5e8972240] like so in your [b:d5e8972240].profile [/b:d5e8972240]file [quote:d5e8972240]vi /etc/.profile[/quote:d5e8972240] Add this: [code:1:d5e897224........
  • Basic Port Listing


    Basic Port ListingHopefully someone finds this useful or at least interesting. http://www.sans.org/top20/#u9 Name Port Protocol Description Small services <20 tcp/udp small services FTP 21 tcp file transfer SSH 22 tcp login service TELNET 23 tcp login service SMTP 25 tcp mail TIME 37 tcp/udp time synchronization WINS 42 tcp/udp WINS replication DNS 53 udp naming service........
  • Viewing and Connecting to an SMB Samba Share on Windows/Linux/Unix


    This will give you the basic info needed to browse and connect to Samba shares from the command line.  From the GUI of Gnome or KDE etc, it is pretty standard and straight forward.  However, I've found very little guides on how to do it from the command line and if you're like me, a nerd who prefers command line for its simplicity and for remote use, this is the way to go. First get a list of all the Samba/SMB shares on the target. smbclient -L hostname........
  • Latest Articles

  • syntax error, unexpected T_SL in PHP Solution
  • grep regular expression match number range between specific numbers
  • bash how to print out lines of text within a range from the first occurrence
  • bash script how to to check LAN computers for open ports
  • MySQL Using mytop Debug Source of High IO and Slow Performance
  • How To Mathematically Convert and Calculate Binary Value To Decimal Value
  • systemd management using systemctl and journalctl to check systemd logs
  • css how to format code in the code tag
  • css br with extra blank line
  • What is /dev/pts and why do we need it in Linux?
  • Linux What is umask (user mask) for file and directory creation permissions and how to calculate umask and change the defaults
  • Linux Permissions and Groups Real Usecase for Group Access
  • Centos 7 python34 how to install the gi library
  • Centos 7 - Convert Minimal to Graphical GUI GNOME or KDE Desktop
  • AMD Set Fan Speed and Other Powerplay Memory/CPU Timings with a Linux script
  • Ethereum Mining Claymore Nanopool Error
  • genisoimage errors with long filenames and deep directory structures
  • Linux Kernel USB Export Errors
  • How to download gajim 0.16.9 XMPP/Jabber client so you can use OMEMO encryption
  • HP DL385 G7 Linux BIOS Update Flash