Dell CS24,FS12 NV5 and NV7 1U Server Information & Parts

 

Motherboard: Gigabyte GA-3CESL: http://b2b.gigabyte.com/products/product-page.aspx?pid=2658#dl

Dell Part Numbers for the motherboard:  R1232 R1232L R2232S SERVER MOTHERBOARD GENUINE 408P9 CN-0408P9

GA-3CESL Manual Download here

RAM Slots: 16 (8 controlled by each CPU)

RAM Type: DDR2 ECC 5300P

CPU Slots: 2 Socket F/1207

HDD Tray Type: 4x3.5" SATA Hotswap (generally any CS24 drive trays will fit and work even if they look different because the chassis is basically identical through all the series).

SATA Backplane: GC-BS14-E1-RH

or GC-BS14-E2-RH

GC-BS14-E3-RH

8g4p63

*The above seem to be wrong the part# of universal to other parts on this server.

The backplane seems impossible to remove and is held in by 1 screw on the far right but there are some kind of standoffs that seem to lock it in even when trying to push the board off it (to the left).

Power Supply: 500W A/C Bell FS7015


Tags:

dell, cs, fs, nv, server, motherboard, gigabyte, ga, cesl, http, products, aspx, pid, dl, genuine, cn, manual, download, ram, slots, controlled, cpu, ddr, ecc, socket, hdd, quot, sata, hotswap, generally, trays, chassis, identical, backplane, gc, bs, rh, universal, standoffs,

Latest Articles

  • FreePBX 17 How To Add a Trunk
  • Docker Container Onboot Policy - How to make sure a container is always running
  • FreePBX 17 How To Add Phones / Extensions and Register
  • Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes. solution
  • Cisco How To Use a Third Party SIP Phone (eg. Avaya, 3CX)
  • Cisco Unified Communication Manager (CUCM) - How To Add Phones
  • pptp / pptpd not working in DD-WRT iptables / router
  • systemd-journald high memory usage solution
  • How to Install FreePBX 17 in Linux Debian Ubuntu Mint Guide
  • How To Install Cisco's CUCM (Cisco Unified Communication Manager) 12 Guide
  • Linux Ubuntu Redhat How To Extract Images from PDF
  • Linux and Windows Dual Boot Issue NIC Won't work After Booting Windows
  • Cisco CME How To Enable ACD hunt groups
  • How to install gns3 on Linux Ubuntu Mint
  • How to convert audio for Asterisk .wav format
  • Using Cisco CME Router with Asterisk as a dial-peer
  • Cisco CME How To Configure SIP Trunk VOIP
  • Virtualbox host Only Network Error Failed to save host network interface parameter - Cannot change gateway IP of host only network
  • Cisco CME and C7200 Router Testing and Learning Environment on Ubuntu 20+ Setup Tutorial Guide
  • Abusive IP ranges blacklist