Step 1.) Install virt-manager
sudo apt install virt-manager
Step 2.) Start libvirtd
sudo systemctl start libvirtd
sudo systemctl enable libvirtd
Step 3.) Permissions
Your user needs access to libvirt and kvm or it won't work without running as sudo.
sudo usermod -a -G kvm yourusername
sudo usermond -a -G libvirt yourusername........
Most relevant config points from my video here.
1.) Create a new End User
The most important part is setting the "Digest Credentials", that is the password that the phone will use to authenticate.........
Your frontend CDN (eg. Cloudflare or even your own load balancer/proxy) must be sending the X-Forwarded-For and you must be running Apache on the backend.
This solves the problem where your logs and services will only see the proxy/CDN IP and not the real client IP.
mod_rpaf will fix all of this
This solution transparently sets the real IP of the client for Apache and any services that rely on........
yum update
Loaded plugins: fastestmirror, ovl
Determining fastest mirrors
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=container error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the onl........
In a lot of distros, vdpau which accelerates video through the GPUis often not installed even in recent distros. This will result in Firefox with Youtube dropping frames when you check the "Stats for Nerds" and to the eye as jerky or slower video playback due to the dropped frames.
Some sites will say that because you are watching VP09 that there is no GPU support, but with vdpau installed and enabled, many GPUs will still be able to use hardware decoding for 4K........
This example is using RTL8821AU chipset from a TP-Link T2U Plus USB adapter and other similar ones should work the same.
Here's how to get this chipset RTL8821AU working in Linux.
Here's how to get RTL8812 and RTL8822 working in Linux.........
Edit your /etc/hostapd/hostapd.conf file like below and restart hostapd.
#WPS stuff
# Enable control interface for PBC/PIN entry
wpa_psk_file=/etc/hostapd/hostapd.psk
ctrl_interface=/var/run/hostapd
eap_server=1
wps_state=2
ap_setup_locked=1
wps_pin_requests=/var/run/hostapd.pin-req
config_methods=label display push_button keypad
#WPS model info stuff change to suit your needs
d........
This guide assumes you have a working Postfix server and want it to sign with DKIM.
There are a few things we have to understand to make all of this work though, which require you to be familiar with DNS as well.
1.) Install OpenDKIM
apt install opendkim
systemctl enable opendkim
2.) Edit /etc/opendkim.conf
Syslog yes
SyslogSuccess yes
Mode&nbs........
Even today we see a lot of servers that have different services and ports open for rpc and this creates not only potential inward vulnerabilities but perhaps more common, the abuse of your network resources in reflective rpc queries.
To stop this problem, you should disable and remove all services relating to rpc or at least block all relevant ports for the service.
Surprisingly, there are still some providers and OS installs in Linux that install these services and leave them........
This is a weird issue as sometimes when upgrading or even migrating, this could happen and the reason is simple but maybe not 100% obvious at first.
You will find that your GUIdoesn't load and most services fail to start, even logind
Here are some errors you may see:
Mar 13 22:22:23 rttbox systemd-logind[2892]: Failed to connect to system bus: No such file or directory
Mar 13 22:22:23 rttbox systemd-logind........
When Is It Time to Leave Your VPS, VDS, and Dedicated Server Provider?
Choosing the right hosting solution—be it Virtu........
In today’s digital landscape, finding a reliable and secure Virtual Private Server (VPS) or Virtual Dedicated Server (VDS) goes beyond just comparing specs and prices. With increasing concerns over data privacy, security breaches, and government surveillance, the wisdom of choosing your VPS/VDS provider based on juri........
During a migration or other custom setup, it's possible you don't have a $HOME/Desktop and as a result the config file that controls this is set to just use your $HOME directory.
This is controlled in the file: $HOME/.config/user-dirs.dirs
As we can see below, Desktop, Downloads, Music and Pictures are set to $HOME. We can edit any of these as we like.
# This file is written by xdg-user-dirs-update
# If you want........
Step 1.) Upgrade to Debian 11 first
The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful.
Step 2.) Update sources.list
Update your /etc/apt/sources.list like this:
deb http://........
If you are running a local DNS server like named/bind and don't want to use the ISPsupplied DNS servers that are announced via a DHCP request (using dhclient) then the solution is simple.
The reason should be obvious, but normally running your own DNS server will provide a more reliable, and fast DNS response and you won't have to worry about filtering as much (unless your upstream filters or proxies outgoing DNS requests).
Edit /etc/dhcp/dhclient.conf........
If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing.
The above results in this less than obv........
The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself.
I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all.
docker run -it --runtime=nvidia --gpus all ubuntu bash
These works for most images li........
In a lot of distros like Debian, ecryptfs will mount itself in /home/yourusername/Private
This is controlled by Private.mnt which may contain the mount path like this:
/home/yourusername/Private
Change the default mount location of ecryptfs by modifying this file:
home/.ecryptfs/yourusername/.ecryptfs/Private.mnt
After you unmount and relogin, you should find ecryptfs is now mo........
Virtualbox is a very powerful tool, but for some use cases it is less than optimal.
Say you are in a work, lab or other environment where you are not alone on the physical network and there could be overlap of IPs, but you need all of your VMs to be contactable from your host, VMs need to communicate with each other, and VMs need internet.
NAT Network will give you VM to VM communication and internet, however, it is buggy and unstable. It also doesn't allow host to VM co........
In this example we install debian 10 with --variant=minbase which gives us a minimal/tiny install. Don't use variant if you want the full size install.
mkdir /tmp/deb10files
debootstrap --variant=minbase buster /tmp/deb10files/
Did you get an error?
debootstrap --variant=minbase buster /home/theuser/VMs/deb10files/
You'll get this error if you make a directory in your home........
Router#show license
Index 1 Feature: ipbasek9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
Lic........
1.) Make sure your conf register is 0x2102
Do show version and at the very end of the output you will see the Configuration register.
show version
Configuration register is 0x2102
If the config register is not 0x2102 then enter this command:
r1#configure terminal
r1(config)#config-register 0x2102
r1(config)#end
2.) Let's Erase the NVRAM/flash........
I've seen this bizarrely happen on a newly partitioned and custom installed Linux install, particularly if you did not properly unmount before rebooting.
You can find reports of it happening on various
How to fix the error: invalid arch-independent ELF magic.
You need to boot into Live/Rescue mode, chroot into your OS properly and then do a grub-install on each drive that nee........
If you are getting this error from systemctl "Loaded: masked (Reason: Unit hostapd.service is masked.)" we need to unmask the service.
Solution
systemctl unmask hostapd
Removed /etc/systemd/system/hostapd.service.
It's fixed
root@routerOS:/var/log# systemctl start hostapd
root@routerOS:/var/log# systemctl status hostapd
● hostapd.service - Access point and authentication server for Wi-Fi and Ethern........
One easy way is to use lspci -k like this:
sudo lspci -k|grep modules|sort -nr|uniq
Kernel modules: snd_hda_intel
Kernel modules: shpchp
Kernel modules: pata_acpi
Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia
Kernel modules: mei_me
Kernel modules: lpc_ich
Kernel module........
Debian based OS's have a similar issue as the behavior in RHEL/CentOS dhclient, which is that if you have an interface that relies on DHCP, if the first attempt fails, it will quit and stop. This is a problem especially if you are using your Linux as a router or something else mission critical, but where the internet for some reason may have been down or the DHCP server it gets a lease from broken.
The expected behavior you would hope is that when things are back online that the........
Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows.
There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........
If you are using mint, delete the preference that stops snap from installing (as it is required for lxc)
sudo rm /etc/apt/preferences.d/nosnap.pref
1. Install lxd:
sudo apt install lxd
Issues install lxd or errors? Click here
Debian at this time does not have lxd so you'll need to use snap:
sudo apt in........
This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory.
Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage.
One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........
This happens during an apt update and is related to an issue with sources.list, which is particularly troubling, if you are doing a "live-build".
P: Configuring file /etc/apt/sources.list
Hit:1 http://deb.debian.org/debian bullseye InRelease
Get:2 http://deb.debian.org/debian bullseye-updates InRelease [39.4 kB........
The Best Docker Tutorial for Beginners
We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........
Why choose OpenVPN instead of a firewall appliance?
OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time.
When comparing OpenVPN with traditional firewal........
These types of errors are normally caused by misconfiguration of your /etc/apt/sources.list.
In this example on Debian 10, if you didn't complete the install correctly, you will have no repos enabled and only rely on CDROM.
"Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source.
E: Package 'wget' ha........
Are you getting this error in Proxmox while trying to apt update or install Ceph?
apt update
Hit:1 http://security.debian.org bullseye-security InRelease
Err:2 https://enterprise.proxmox.com/debian/pve bullseye InRelease
401 Unauthorized [IP: 144.217.225.162 443]
Hit:3 http://ftp.hk.debian.org/debian bullseye InRelease ........
Here is the scenario, you are using QEMU/KVM and are using something like the AC97 sound driver to pass the host audio to the guest via pulseaudio. This is useful because you can transparently pass your mic input from the host which means you can mute your microphone from the host, which prevents the guest from receiving any mic input even if unmuted.
Mute / Unmute Fix
This issue also seems to happen even if you press the mute button on the microphone and then unmute,........
This assumes that you've already installed the relevant HWIC cards eg. Cisco Asynchronous Serial NIM
These are essentially cards that you install into your router, once installed you connect an Async cable to one of the ports on the card which normally gives you 8 console cables and are normally labelled 1 through 8.
You connect all of the cables to the devices you need (even non-Cisco devices) whether switches, routers or firewalls, they will usually work.
The real m........
Just a quick note and warning is that if you are testing to see if EFIPXE booting works on a VM, MAKE SURE it actually works. For example Iinitially tested using my Distro's QEMU 2.5+dfsg-5ubuntu10.46 and ovmf BIOS firmware (OVMF supports EFI). However, I found on old versions of QEMU (like 2.5), EFIbooting with GRUB NEVER works so it may appear that you have made a mistake when everything is fine when you boot a physi........
Enable "cli" mode equivalent in JunOS
cli
Configure Mode
configure
So rather than going to the console on a Cisco switch and typing "enable" and then "conf t", the equivalent in JunOS is "cli" and "configure".
How Do You Apply Changes You've Made?
You can make all kinds of changes to the switch, but remember they are not........
Aruba has a very traditional "admin" for user and password by default for many of its appliances. If you've reset or just got some new units this will be the default password that you should change immediately for security reasons.........
Traditionally kernels were numbered starting from 0 but by default the "new style" of grub boot loading considers each subkernel item to be different so if you have 3 entries for 4.40-148 rather than counting for 1.
To get the expected behavior let's show this example and how we can boot it
We do a grep on menuentry in /boot/grub/grub.cfg to see all of the bootable kernels rather than scrolling through loads of extra entries we don't care about (thou........
This is very frustrating but the fix is usually easy once you read this blog. It's very frustrating when you find that your Linux / Ubuntu laptop's wifi will NEVER work unless it is plugged into the power. The wifi menu may say "Wifi disabled by hardware switch". You may find that your laptop has no switch or has a function wifi button on the keyboard but this does not work or have any effect.
The cause is usual a "wmi" kernel module and simply doing an........
apt install software-properties-common
add-apt-repository ppa:deadsnakes/ppa
apt update
apt install python3-pip
apt install python3.7 curl gnupg python3.7-dev git
ln -s /usr/bin/python3.7 /usr/bin/python3
pip3 install numpy keras_preprocessing
curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add -
echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........
When authentication times out that is one thing, but when it just fails like below Asterisk by default will not re-register until you the admin reload the sip or asterisk server:
voipserver*CLI> sip show registry
Host dnsmgr Username Refresh State&........
yum -y install wget unzip
wget https://download.nextcloud.com/server/releases/nextcloud-18.0.2.zip
unzip nextcloud-18.0.2.zip
yum -y install php php-mysqlnd php-json php-zip php-dom php-xml php-libxml php-mbstring php-gd mysql mysql-server
Last metadata expiration check: 0:58:02 ago on Fri 13 Mar 2020 02:12:49 PM EDT.
Dependencies resolved.
===================================================================........
The reason for doing this is that the installer doesn't seem to work properly for LUKS and the server installer doesn't even support LUKS anymore. When you use the GUI install on Desktop for LUKS it won't boot and will just hang after you enter your password. So the only reliable way is to do it ourselves.
1.) Make a default minimal install of Ubuntu
2.) Have a secondary disk on the server or VM.
3.)........
yum -y install mariadb-server
systemctl start mariadb
mysql_secure_installation
Now we need to secure our install and set the MariaDB root password:
The lines you need to act on are marked in bold shown with the answer you need.
mysql_secure_installation
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
SER........
This is all controlled by /etc/issue
You can basically enter anything in there that you like, but there are preset variables that are mentioned at the end of the page that discuss this.
Some examples of /etc/issue:
Centos 7:
S
Kernel r on an m
Ubuntu 16.04:
Ubuntu 16.04.6 LTS n l
You can also insert any of t........
sudo pip3 install python-docx
[sudo] password for :
Downloading/unpacking python-docx
Downloading python-docx-0.8.10.tar.gz (5.5MB): 5.5MB downloaded
Running setup.py (path:/tmp/pip_build_root/python-docx/setup.py) egg_info for package python-docx
no previously-included directories found matching 'docs/.build'
warning: no previously-included files matching '.DS_Store' foun........
Install Errors on Version 12:
This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5
on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error.
*Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install.
What really causes this even though you successfully install........
The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs.
qemu-kvm command:
/usr/libexec/qemu-kvm -version
QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard
........
This is the closest way to disabling it without using the "libata.force=noncq" kernel boot option is to set the queue to a depth of 1 which doesn't actually disable it.
Change the sdc below to match the device you want to disable NCQ for.
[root@officebox ~]# echo "1" > /sys/block/sdc/device/queue_depth
Errors that indicate you are having a performance issue are these in messages or dmesg relating to N........
Switch#show ip dhcp snooping
Switch DHCP snooping is disabled
DHCP snooping is configured on following VLANs:
1
Insertion of option 82 is enabled
circuit-id format: vlan-mod-port
remote-id format: MAC
Option 82 on untrusted port is not allowed
Verification of hwaddr field is enabled
Interface&nb........
This works on the 2000 and 3000 series generally.
*The easy way is to just hold the mode button for 10+ seconds.
The full/proper way is below:
1.) Either power on the unit and hold the "mode" button or hold the "mode" button until you see the below:
00:04:08: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram
00:04:08: %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configur........
I tried to stop a qemu-img copy or clone and it broke everything. It was fine to "stop" it from the GUI but a process still persisted so I killed the relevant qemu-img and the kernel went crazy. It also may not have helped that I tried to lvremove a different volume (an unused disk). But either way it breaks LVM (you cannot even run lvdisplay) so a reboot is necessary.
Jan 17 06:45:21 testserver kernel: [ 5680.439337] systemd-udevd D 0&nbs........
iw dev wlan0 station dump
This is very useful because it is helpful if you are running something like hostapd and need to see the signal strength and negotiated connection speed.
Station ff:ff:ff:ff:ff:ff (on wlan0)
inactive time: 16309 ms
rx bytes: 25451
rx packets: 325
tx bytes: 44381
tx packets: 159
tx retries: 0
tx failed: 0
signal: -72 [-72] dBm
signal avg: -72 [-72] dBm........
Just find the relevant file in /etc/NetworkManager/system-connections
sudo vi /etc/NetworkManager/system-connections/Wired connection 1
[802-3-ethernet]
duplex=full
mac-address=00:00:00:FE:FE:FE
[connection]
id=Wired connection 1
type=802-3-ethernet
timestamp=1532403341
[ipv6]
method=ignore
[ipv4]
method=manual........
growisofs -Z /dev/sr0 critical.tar.gz.gpg
Executing 'genisoimage critical.tar.gz.gpg | builtin_dd of=/dev/sr0 obs=32k seek=0'
I: -input-charset not specified, using utf-8 (detected in locale settings)
File critical.tar.gz.gpg is larger than 4GiB-1.
-allow-limited-size was not specified. There is no way do represent this file size. Aborting.
:-( write failed: Input/output error
#remember to us........
On a test machine Iwas never able to access to a newly created 4th partiton. As we can see there are dev devices for everything but the 4th partition.
The normal "partprobe" or "kpartx" or kernel being told to rescan the block device didn't help (only a reboot did).
fdisk -l /dev/sda
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units........
Do you hate it when your ISPhas old cached records because of a high TTLon the DNS record of the relevant domain? In plain English this means you often can't connect to a site or service because your ISP's DNS servers haven't gotten word of the new IP address (probably because they haven't checked). There are also some that are notorious for ignoring TTL and not updating records for days!
But if you are lucky and smart enough to have your own Linux based DNS se........
First we need to create dhclient.conf if it doesn't exist or edit it:
vi /etc/dhclient/dhclient.conf
#add this line at the top add the IPs as commas they will be the highest priority nameservers and whatever your ISP gives you will be used after these one (good for DNS backup)
prepend domain-name-servers 127.0.0.1,10.10.25.8;
After you restart your network or run dhclient again you should see the contents of........
confmodules=`cat /etc/httpd/conf/httpd.conf |grep -v ^#|grep "modules/"|awk '{print $3}'|cut -d "/" -f 2`
for module in $confmodules; do
echo "module=$module"
if [ ! -f /etc/httpd/modules/$module ]; then
linenum=`awk /"$module/{ print NR; exit}" /etc/httpd/conf/httpd.conf`
sed -i "$linenum"s/.*// /etc/httpd/conf/httpd.conf
&n........
What Is Active Directory?
Active Directory is essentially an enhanced, centralized database with a set of objects that make user management, authorization, and data management simpler. Active Directory is synonymous with "Domain Controllers" where a single "domain" often consists of multiple sites and members of the domain. Multiple domains can also be joined to belong to a tree ( a collection of domains). And the highest layer is the forest whi........
systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system.
The key commands or arguments you will use with systemctl are the following:
Unit Commands:
list-units [PATTERN...] List loaded units
&nbs........
After starting the install it stalls here:
admin/index.php?cache=0&agreelicense=1&confirmrelease=1&lang=en
If you manually refresh you get a Plugins check screen:
Installation
System
Moodle second step fails just blank screen:
https://domain.la/user/editadvanced.php?id=2
Solution: give up and choose something else it shouldn't be thi........
Usually this is because when you created your user you added a user but didn't create their home directory and/or for some reason your .bashrc and .bash_profile in ~ (home) is broken/missing.
In your home just create the following files with the following content to solve it:
.bashrc and .bash_profile.
To apply it just relogin/start a new bash session
# .bash_profile
# Get the aliases and funct........
Aug 10 01:11:54 mailserver postfix/smtp[6180]: 020AE17C2BD1: to=, relay=none, delay=0.29, delays=0.28/0/0/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=gmail.con type=A: Host not found)
A user complained that their e-mails weren't being delivered but they actually made a small typo and used gmail.con so it wasn't working as expected of course........
[root@thetor2017 conf]# service httpd restart
Stopping httpd: [ OK ]
Starting httpd: WARNING: MaxClients of 3000 exceeds ServerLimit value of 300 servers,
lowering MaxClients to 300. To increase........
I had this error in an unsupported CPUon VMWare 6.7 and apparently this sometimes works especially on older VMWare versions like 6.5 5.5 etc (but in my case it did not).
To make sure it proceed when you see "Loading VMWare"
Hit "Shift+O"
Then add "ignoreHeadless=TRUE"
See an example below:........
First of all download the raw .so file from zend:
Copy the one relevant to your PHPversion to /usr/lib64/php/modules/
eg.:cp ioncube_loader_lin_5.3.so /usr/lib64/php/modules/
Then in your /etc/php.d/ directory create the file:
vi /etc/php.d/zend.ini
zend_extension = /usr/lib64/php/modules/ioncube_loader_lin_5.3.so
After that restart apache/httpd and you'll be good to go!........
ValueError: new value non-existent xfs filesystem is not valid as a default fs type
Pane is dead
From what Iread this is misleading and has to do with the fact that the initrd and kernel are mismatched.
This is a hard situation because for some older hardware Iam using the Centos Plus kernel which has modules that Irequire for an older server/NIC. This seems to have cropped up in the past few months and there is no simple fix........
This is one thing that has me wondering about SMF. It is apparently a known issue but in the latest version and new install nothing looked right because it was using http://127.0.0.1 to find everything! How on earth would it ever do this or think it is normal?
Excerpt of crazy html code it produces that causes the issue:
........
This guide will work for most modern Linux versions like Centos RHEL 7, Debian, Mint, Ubuntu etc...
In Centos 7 the days of editing the "kernel"line and adding "single"are gone. On top of that sometimes after a new install passwords do not work, maybe you forgot your password or for some other reason you need to break in or fix your system? It could also be because you can't mount your root / or some other /etc/fstab error and many other err........
yum -y install samba
vi /etc/samba/smb.conf
https://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-6.03.zip
mkdir syslinux;cd syslinux;unzip syslinux-6.03.zip
mkdir -p /tftpboot/libs/
cp bios/com32/modules/linux.c32 /tftpboot/libs/
cp bios/com32/libutil/libutil.c32 /tftpboot/libs/
cp bios/com32/lib/libcom32.c32 /tftpboot/libs/
#add lib path
echo "PATH libs" >> /tftpboot/pxeli........
edit theme css:
Click "Appearance -> Editor -> Stylesheet"
http://yourblog.com/wp-admin/theme-editor.php?file=style.css&theme=twentysixteen
textarea {
color: #1a1a1a;
/*font-family: Merriweather, Georgia, serif;*/
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif........
Essentially a program I was running for mining did not terminate properly with Ctrl+C it is listed as defunct and cannot be killed, kernel is tainted and normal tricks to disable the port are impossible the dev and sys entries for the device cannot be browsed or interacted with in any form without a lockup of the request. The only solution is to reboot due to the kernel taint as far as I can find so far.
[1130246.811056] INFO: task minerd:21861 blocked for more th........
#if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used
wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2
tar -jxvf ffmpeg-3.3.2.tar.bz2
cd ffmpeg-3.3.2/
./configure --disable-yasm
install prefix /usr/local
source path ........
This container won't start after exhausting its memory. There are no relevant or helpful messages in dmesg or vzctl.log as well. Standard troubleshooting such as disabling PPP etc has not helped.
2017-07-06T23:33:29-0400 vzctl : CT 888171 : Locked by: pid 166029, cmdline vzctl start 888171
2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container already locked
2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container was stopped
2017-07........
Still looking for the solution
Working Solution 2017/07
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys D46F45428842CE5E
Solution
gpg --keyserver hkp://subkeys.pgp.net --recv-keys D46F45428842CE5E
gpg: requesting key 8842CE5E from hkp server subkeys.pgp.net
gpg: keyserver timed out
gpg: keyserver........
Normally an ls will just produce the actual contents of the current or target directory eg.
ls mydir
myfile1
myfile2
myfile3
But what if you need to find the full or relative path to another program that cares whether that be zip or etc.?
You need the "-d" switch and the asterisk inside the actual directory.
ls -d mydir/*
mydir/myfil........
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was
12: Timeout on http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds')
Error: Cannot find a valid baseurl for repo: base
You would think this should be fine and simple like using a proxy with most other software?
However........
md127 issue, it should be /dev/md3 per mdadm.conf
Any time something is mounted as md127 it almost always means there is no entry for this mdadm array in the mdadm.conf in initramfs (which is separate from your actual /etc/mdadm.conf).
cat /etc/mdadm.conf
ARRAY /dev/md3 metadata=1.2 UUID=b6722845:381cc94e:7a2c5b5f:8e3b7c4f
The reason for this is something strange, most Linux OS's bizarrely always keep their own copy of /etc/mdadm.con........
You may get this after a long time of not rebooting but especially if you have rsync'd a / partition or deployed an image to another VPS or computer, you will often have this issue.
The good thing it usually just takes a reboot.
Here is more info from Centos........
This can happen because port 80 is not open, or your license has expired and/or your IP is out of date and also if the license server itself from cPanel is having issues.
In most cases as long as you have a valid license the following command will solve it:
/usr/local/cpanel/cpkeyclt
Updating cPanel license...Done. Update succeeded.
Building global cache for cpanel...Done
Cannot........
For themes and custom CMS setups, the typical HTML theme is not ready to go at all but here are some common sed commands (search and replace that will get most of them working without breaking as you'd expect).
The problem is that often the theme directory will be separate from the content and this will break the relative paths that these themes use.
sed -i s/'href="'/'href="/themes/yourtheme/'/g index.html
sed -i s/'src="'/'src="/themes/y........
Download from here http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9200-8e#downloads
sudo Installer_P20_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash -listall
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
&nbs........
To check the version of Ubuntu just use the lsb_release command as shown below and you will be able to see the exact Ubuntu version you have installed.
lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 14.04 LTS
Release: 14.04
Codename: trusty........
This command in Debian/Ubuntu/Mint will get everything need installed for most Java based KVM viewers:
sudo apt install icedtea-netx
The following additional packages will be installed:
ca-certificates-java icedtea-netx-common openjdk-8-jre openjdk-8-jre-headless
It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post.........
sudo apt-get install zoneminder
[sudo] password for one:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libuser-perl python-evince kdebase-apps kwrite unixodbc
libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp
python-mediaprof........
So the situaton is this, you depend on things being relevant to where your bash script is and to be safe you want it to be dynamic (eg. do not hard code that we switch to /abc/dir but rather detect where script.sh is located).
scriptlocation="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
The path is then contained the the variable "scriptlocation" so you can cd to it in your script etc............
Based on this from Debian
The 'distribution' can be either the release code name / alias (wheezy, jessie, stretch, sid) or the release class (........
What matters most about VPNproviders in 2024?
We are highly suspicious of VERYLARGE VPN providers that have LOW PRICES and HUGE DISCOUNTS. The suspicion is that for those who know what costs are involved to purchase thousands of IPs and servers are not small. At the prices that many of the big mainstream providers offer, it is likely unprofitable or barely profitable. Then, how are those companies making money or is that even the goal?
There use........
Error: Unable to restore run data (10)
Error: Unable to restore run data (11)
Ikeep getting this error but so far there is no obvious solution. Sometimes I've had to remove the *.hist files so I'll try that again.
*Update
This is an ongoing random problem after months of running webalizer it runs into some problem that can only be fixed by removing the following files so it can rebuild the stats (you end up losing p........
Apr 17 11:55:47 Cluster01 heartbeat: [1426]: WARN: ha_msg_add_nv_depth: line doesn't contain '='
Apr 17 11:55:47 Cluster01 heartbeat: [1426]: info: >>>
Apr 17 11:55:47 Cluster01 heartbeat: [1426]: ERROR: NV failure (msgfromsteam): [>>>
]
I have never been able to reproduce the above but it happened on heartbeat-3.04-2 when Itook a node down for testing.
One thing Ibelieve caused it was by configuring ha.cf........
I never found a solution to do it live (nothing worked that I found) so it looks like a relogin is required.
Check your maximum file limit
cat /proc/sys/fs/file-max
824460
This is different than your actual's user limit which you'll see below
ulimit -n
1024
Try and set it higher but it won't work
ulimit -n 65000........
Just in case anyone is wondering that is the case, it can make troubleshooting impossible if you're making changes to php.ini but don't realize the webserver must be restarted for those changes to apply (contrary to running php-cgi which always looks up the current .ini settings).........
Get the new version here that actually works:
https://github.com/haad/proxychains........
/scripts/phpextensionmgr install PHPSuHosin
Updating md5sum list
Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)...
Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........
relay=alt4.gmail-smtp-in.l.google.com. [74.125.136.26], dsn=4.0.0, stat=Deferred: 421-4.7.0 [ 10] Our system has detected an unusual rate of
This is strange because the mail server IP is not blacklisted anywhere and the IP itself has not been used for years and this server is clean and has only sent a few e-mails to gmail.com in its entire time.
I wonder if this is a legacy block on a whole range of IPs as punishment for others in the block........
I bricked one of my cards by following a guide from UNRAID.
Step #1 from them wipes out the BIOS, but guess what? The step where you restore the BIOS should have been done first, which is sas2flash but no version supports or is able to find my Perc 6/i. So now I'm a bit stuck.
I tried using megarec but it's funny that it can wipe the BIOS but can't forcefully reload it:
megarec -writesbr 0 mpt2sas.rom
Supports 1078 control........
One thing to remember is that you need MegaCli to do the flashing.
You also need the correct file,I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli(they were really the wrong version). I have an external PCI-E Dell 6 Perc/I butI chose images from the 'Integrated" on motherboard version as it was allI could find. They are different, and below is my first time finding success.........
I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally.
I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli
wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN
--2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN
Resolvi........
LSi Megaraid
At first it was configured as a RAID 0, then I deleted the Virtual Disk Group.
I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing.
To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
pxe-32 tftp open timeout
The solution was to enable tftp in xinetd with "chkconfig tftp on".
See the troubleshooting below:
chkconfig --list
NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off
acpid 0:off&n........
The error itself "mkdir(): Too Many Links" is not very useful, but I'll translate it into plain English.
It means you've reached the filesystem's limit of how many directories can be created in a single directory.
In this case for ext3 the limit is 32000 and it was exceeded.
What's the solution?
The simple solution is to move those directories into more subdirectories possibly sorting them by date, alphabet or numerically.........
dialplan reload
It's really that simple, though some say "extensions reload" but it doesn't work for me, perhaps it depends on the version of Asterisk.........
I installed Ubuntu 11.04 for testing purposes but I couldn't even download SSH server:
sudo sed -i -e 's/us.archive.ubuntu.com/old-releases.ubuntu.com/g' /etc/apt/sources.list
After running the above make sure you do a "apt-get update"
Note with the above that Ihave the search string of "us.archive.ubuntu.com" change it to whatever is in your sources.list
The above does not fix all repositories either, I haven't had a chance t........
When trying to reboot this Centos 5 container, it gets stuck as "mounted" and requires a manual start command, here is what dmesg shows:
[424458.173252] VE10000: no allowed mount options found for device 0:21
[424458.177970] proc: unrecognized mount option "relatime" or missing value
[424460.297663] CT: 10000: stopped
[426663.466433] CT: 10000: started........
This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others:
Choose CountryCanadaJapanUnited StatesUnited KingdomAfghanistan........
I find it very annoying that this mouse has buttons on the side where you grip it and the left one goes back in the browser and the right one goes forward. Imagine if you're filling out a form and hit it, most forms/websites have no protection against it.
Source: http://ubuntuforums.org/showthread.php?t=2065400
Here's how I fixed it with xinput, it's too bad there's no good standard GUI to........
This is a handy link and list of all the relevant Directadmin log files and related servers.
http://help.directadmin.com/item.php?id=11
DirectAdmin:
/var/log/directadmin/error.log
/var/log/directadmin/errortaskq.log
/var/log/directadmin/system.log
/var/log/directadmin/security.log
Apache:........
Usually a lot of things don't work right on Linux, but Samsung printers aren't one of them. I used to have a CLP310N that never worked right in Linux, it would print strange lines over pictures or with some programs, no picture at all. I was using whatever the default driver that Ubuntu found.
Now I upgraded to a CLP-365W which is basically the same thing with wireless but no driver from Ubuntu (eg CLP-350) works. I was forced to go to Samsung's site and was surprise........
I like badblocks and don't know a better more reliable way of checking the drive. If there are no errors from badblocks and dmesg doesn't produce any SATA related errors, the drive should be good (for now at least).
I also prefer to do read and write mode, yes it takes ages but it is really the best way of doing it. This gives me the most confidence in knowing that a drive, especially a new one is at least OK at the moment.
To test in read only mode........
I closed program by program untilI found the culprit, it's baffling how the cause was Thunderbird but then again it does use a lot of memory and I have thousands of messages between dozens of mailboxes.
But still I don't think this should happen and Xorg shouldn't allow this either.
So for those who have mysteriously high CPUusage from Xorg start closing program by program until you find the culprit.
The interesting thing is that after reloading it, the Xor........
The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.5.3 Error: too many recipients.
We set this in main.cf:
smtpd_client_recipient_rate_limit=0
We didn't specify it before and the default is said to be 0/unlimited and it still didn't change anything.........
This array is a RAID 1 and in this case 1 of the 2 drives failed (a WD drive and I've found them to be the weakest and most unreliable of any brand and are easily damaged/DOA when shipping them).
mdadm --manage /dev/md0 --add /dev/sdb1
The above assumes the array you want to add to is /dev/md0 and the device we are adding is /dev/sdb1
*One thing to remember is to make sure the partition you are adding is the correct size for the array. You can also g........
For years I've always built cheap systems believing that there is little difference in more expensive components when it comes to reliability and quality, I generally believe this still except for Power Supplies.
I've always bought cheap cases with nice sounding 350-550W stock/cheap/crap power supplies and haven't had any issues for the most part until recently.
One such case is an NGEAR case with a 550W Optimax power supply, I always read that these supplies don't produce the........
This is the mail system at host mail.postmail.com.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
&........
These were caused by a bad stick of Corsair RAM
[] free_hot_cold_page+0xfc/0x150
[] __pagevec_free+0x14/0x1a
[] release_pages+0x127/0x12f
[] __pagevec_release+0x15/0x1d
[] __invalid_mapping_pages+0x120/0x156
[........
Have you ever found a website/page that has several or perhaps dozens, hundreds or thousands of files that you need downloaded but don't have the time to manually do it?
wget's recursive function called with -r does that, but also with some quirks to be warned about.
If you're doing it from a standard web based directory structure, you will notice there is still a link to .. and wget will follow that.
Eg. let's say you have files in http://serverip/documen........
ifup eth0
SIOCSIFFLAGS: Cannot allocate memory
Failed to bring up eth0
This is on a Centos 5.5 machine with OpenVZ kernel 2.6.18-238.12.1.el5.028stab091.1PAE, I updated 3 systems with the same hardware to the same kernel and for some reason the network didn't come back.
This only happened once the first time I booted into the new kernel and hasn't happened again but this is a serious issue for those running systems from remote locations such as a datacente........
I am watching the Canucks riot and a reporter said Twitter is down.
My home connection on Shaw is fine, but when Iused my Rogers network over the cell, it says "Rate Limit Exceeded". I wonder if this is a transparent redirect by Rogers under police order?
I noticed that the Telus network loaded Twitter just fine.........
I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem:
We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work.
I only get this error with the openvz.repo and not others such as Centos-Base.repo
With my other server it works normally:
================
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........
This assumes that you've at least created the correct partition for your DRBD already.
Notice that I am "diskless", that's because either your DRBD partition doesn't exist/has been renamed (eg. sdb becomes sda when sdb dies and you reboot) or because that drive is really actually dead/gone.
*If you need to permanently change the partition/device for your resource be sure to edit /etc/drbd.conf on both hosts and reload the config.
(replace r0 with........
If you have a webserver and find you have high IO/lagginess MySQL is one of the first things to check. It turns out MySQL was my problem and it was creating a high load on my server, especially for IO.
How to Enable MySQL Slow Query Logging To Find Slow Performance/Queries
vi /etc/my.cnf
Add this anywhere under [mysqld]
#slow queries
log-slow-queries = /var/log/mysql/mysqlslowqueries.log
long_query_time = 1........
mod_status is a great way to track down the source of high CPU usage and to find what vhost/script is the cause of it.
It gives you a live view of bandwith usage, CPU usage, and memory usage broken down by domain/vhost and script/URI.
Enable mod_status
vi /etc/httpd/conf/httpd.conf
ExtendedStatus On
SetHandler server-status
Order Deny,Allow
Deny from all
All........
mysql errors even though these files do exist:
110405 13:21:37 InnoDB: Operating system error number 13 in a file operation.
InnoDB: The error means mysqld does not have the access rights to
InnoDB: the directory.
InnoDB: File name ./ibdata1
InnoDB: File operation call: 'open'.
InnoDB: Cannot continue operation.
110405 13:26:15 InnoDB: Operating system error number 13 in a file operation.
InnoDB: The error means my........
My mother needed a new laptop and I recommended her the same one I would have bought myself or my wife, that means the cheapest possible laptop with the most features for the money.
This HP shines at this price point and one thing that made me stay away from buying more and recommending HP/Compaq was the poor battery life. Not anymore, this model has an industry leading up to 4 hours of battery life.
Key Factors for Choosing It:
HDMI Out........
I don't expect this to be solved soon but some of Yahoo's DNS servers are out of whack. I changed the IPs of some nameservers of some domains and now most Yahoo users can't e-mail to those domains!
As you can see below by the "No MX or A records for mychangedomain.com", now Yahoo's DNS/mailserver DNS cache is wrong. You would think they would at least have cached the old incorrect records, but instead for some reason their DNS cache has no entry and doesn't seem........
Santrex Review/Scam/Complaint
Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support admitted the server was not working and to wait for 24 hours. I waited for 4-days, after which they sent an e-mail saying my service was being disabled for SPAM ...(when SolusVM shows 0kb of traffic). Th........
Virpus Review/Scam/Complaint
Virpus is advertised on LEB (lowendbox.com). My initial payment was refunded after days of not receiving the VPS, but two subscrption payments went through and Ionly received notification after the second one. They ignored the requests in the ticket and by e-mail for a refund and even escalated the PayPal dispute that "we're assuming this is for a service that was provided" (when they obviously know otherwise by........
These are the only two I've encountered but here is the low-end and note my story is not at all unique.
In my case I was scammed out of money and did not receive any service at all from either company.
Santrex Review/Scam/Complaint
Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support adm........
Centos 5 Postfix and SPAMASSASSIN Tutorial
yum install spamassassin
chkconfig spamassassin on
vi /etc/mail/spamassassin/local.cf
##############
#required_hits 5
#report_safe 0
#rewrite_header Subject [SPAM]
#5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives
require........
don't delete /var/lib/mysql/ib_logfile0 or ibdata1 or mysql won't restart
I didn't realize they were internal and not part of replication like the relay files!
/usr/libexec/mysqld: ready for connections.
Version: '4.1.22-log' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution
110127 16:31:00 [Note] /usr/libexec/mysqld: Normal shutdown
110127 16:31:00 InnoDB: Starting shutdown...........
The first thing you need to remember is not to check from the same host/server itself. This is a silly mistake I made, the reason is that many mailservers and especially postfix are configured to allow relaying from the localhost/same host. If you do that you'll get a false positive.
*Make sure you test from another host/system than the mail server itself!
telnet yourmailserverhost.com 25
220 Courier (FreeBS........
Basically you should always be 100% sure that whatever IPyour mail server sends out with has reverse DNS/PTR records. Remember that unless you own your IPs then you won't be able to set your own reverse DNS. Even if you were to create a reverse PTR record on your DNS servers it will be ignored. Reverse DNS is queried to pre-assigned DNS servers of your ISP, so therefore you'll need to contact your ISP/Colo/Hosting provider to do a reverse DNS entry.
If you don't have........
understanding /etc/aliases
*remember to apply changes you need to run "newaliases" after editing /etc/aliases
one thing I don't get is that it doesn't allow you to specify the whole e-mail address on the left-hand side
eg:
yourfullemail@domain.com: someotheremail@domain.com
postalias: warning: /etc/aliases, line 109: name must be local (if you try the above)
It works more like this:
your........
CPU/Kernel/MB/RAID problem?
Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168]
Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........
php won't work with absolute links
Warning: imagecreatefromgif(/images/header.gif): failed to open stream: No such file or directory in /vhostsdir/httpdocs/images.php on line 15
That is how my path is structured and ONLY likes the true full path as /vhostsdir/httpdocs/images/header.gif
Why can't it work relative to the vhost directory with absolute links just like say an html link would.........
This really made me nervous but notice the mdstat says "check". This is because in Ubuntu there is a scheduled mdadm cronscript that runs everyday on Sunday at 00:57 that checks your entire array. This is a good way because it prevents gradual but unnoticed data corruption which Inever thought of.
As long as the check completes properly you have peace of mind knowing that your data integretiy is assured and that your hard drives are functioning properly (I'........
I'm mentioning this because I keep forgetting what port the management is on for the web interface (since newer releases of VMWare server took away the superior stand alone client).
So remember it is port 8333 and sometimes you need to restart vmware-mgmt service and also enable sslv2 in your Firefox or it won't connect.........
I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD.
Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer).
I'll........
Mencoder is great, you can throw anything at it, including video files from your camera and have it encode into xvid or almost any other format.
In my case I took 640x480 video from my Canon and reduced the size by 1/3 with the options below (there are many other options that you can read about in the manual but I like to keep it simple).
Mencoder Encode
mencoder -ovc xvid -oac mp3lame -xvidencopts fixed_quant=4 -o ........
Here is a RAID 1 partition (500GB Seagate & 2TB WD):
Sequential Reads
File Blk Num Avg Maximum Lat%&nbs........
This is a very simple solution, but most guides out there make you login twice (once to scp the key) and once to put the key in authorized_keys. There's no need for that.
If you don't already have a ~/.ssh/id_rsa.pub just type "ssh-keygen -t rsa" and keep hitting enter until it's done :)
Just use this code to easily enable passwordless login with SSHD
key=`cat ~/.ssh/id_rsa.pub`;ssh user@192.168.5.25 "echo $key >> ~/.ssh/auth........
From the package "parted" you can use the command "partprobe" to re-read the partition table. I really hate rebooting, and that's what Iloved to hear about AHCI motherboards, that they allow hotswap so you don't have to reboot. But that's only as good as the OS, if the OS does not reload the partition table you won't be able to do anything with that new drive you attached without rebooting. Yes, even without re-reading the partiton table Linux will........
You can find it for free at http://nginx.org/ I find nginx is simpler to setup than pound (it's not hard but I found it unintuitive and annoying), it seemed to make some basic setups overly complicated with the config file syntax.
nginx on the other hand is perfectly suited in everyway, it is even simpler to setup and seems to be the most stable and most efficient any load balancer. I would go as far as to say that a good nginx setup is more relia........
I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find.
yum search ftp
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirrors.netdna.com
* updates: updates.interworx.info
* addons: yum.singlehop.com
* extras: mirrors.netdna.com
rpmforge........
Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics.
# # # # # # # ##### ###### # # #### # #
# # ## # # # #&nb........
Nice General Linux RAID 1 GuideFull examples/tutorials that should work for any Linux system using GRUB or LILO as the boot loader.
This is the only tutorial I've seen that clearly shows how you can convert an existing non-RAID system to software RAID1 remotely, without ever having to be at the computer. This is important for people who co-locate or rent dedicated servers that they may not have physical access to in a timely manner.
https://alioth.debia........
Telus + 2Wire 2700 Router HorribleWell first of all let me say this is the only router/switch that sometimes seems to crash/disconnect computers on the local network.
This device also thought it would be smart to block VOIP packets coming from my Sipura ATA VOIP adapters so I disabled the [quote:cb89ba7bff]"Invalid TCP Flag Attacks (NULL/XMAS/Other)"[/quote:cb89ba7bff] option
Then all of a sudden I couldn't get onto any web pages, the wireless........
Updating yum repos for DAG /etc/yum.repos.dIn /etc/yum.repos.d
[quote:96456b2ab9]Create any file such as "CentOS-Dag.repo" in /etc/yum.repos.d[/quote:96456b2ab9]
Add the following to the above file:
[code:1:96456b2ab9]
[dag]
name=Dag RPM Repository For Red Hat Enterprise Linux
baseurl=http://dag.atrpms.net/redhat/el$releasever/en/$basearch/dag/
http://dag.freshrpms.net/redhat/e........
Vonage & Linksys Offer Trade-In ProgramVonage & Linksys Offer Trade-In Program
Monday, June 13 @ 09:22:36 PDT
Vonage is offering customers a way to get a free 802.11g router when they turn in their old one.
advertising
For a limited time, customers can trade-in their used router any brand, any model for a Linksys Wireless-G Router with 2 Phone Jacks for broadband telephony (WRTP54G) for free (after rebates), when they si........
The New Chips on the BlockThe New Chips on the Block
By Bruce Gain
Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html
02:00 AM Jun. 13, 2005 PT
We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........
Intel's Finnish FetishIntel's Finnish Fetish
By Dave Mock
June 13, 2005
Chipmaker Intel (NASDAQ: INTC) has successfully topped the personal computer market for decades. Breaking into related areas such as communications has been much difficult for the world's largest semiconductor maker. But a new partnership with Nokia (NYSE: NOK) could help to change that.
Intel's forays into cellular-phone and home-entertaiment-device chips have........
Become your own ISP!http://waverider.com/
I would link to the exact product I am mentioning but it's under Products/5.8Ghz because I can't find the exact URL because of their annoying javascript and frames (you'll see what I mean).
The exciting thing is that this unit can supposedly be up to 72mbit, it is NOT line of sight and the range is up to 20miles. I wonder how real world speeds and range would actually be and if it is reliable.
I j........
CVSUp the Easy WayIf you're reading this you probably have never used CVSUp or don't know how.
CVSUp can be used for two things or just one if you prefer.
*Keeping your kernel up to date
*Keeping your port list up to date
Start by editing the following file in:
[b:76928b387d]vi /usr/share/examples/cvsup/cvs-upfile[/b:76928b387d]
It can be quite overwhelming with all the crazy options.
Basically there are only 3........
CDR Manufacturers - Why is so much media bad?I have searched for good media and tried many kinds for years. I guess I'll try to summarize my findings and conclusions.
Dye is irrelevant, dye of any color can be good or bad, it more likely depends on the manufacturer.
Speaking of manufacturers, the name at the top of the disc means nothing. For example, Memorex along with any other 'brand' is actually always made by another manufaturer including CMC Mag........
Other Security Web SitesSeveral websites actively track security issues. This list provides you with the major providers
of security information on the Web. Many of these organizations also provide newsletters and
mailings to announce changes or security threats:
Center for Education and Research in Information Assurance and Security (CERIAS)
CERIAS is an industry-sponsored center at Purdue University that is focused on technology and
relate........
I played around with xmit power (how much power in mW) to see if I could increase the range and signal strength. Idon't think this Linksys WRT54G's strength is the wireless, it seems to have poor signal quality and transfer rates all around.
Ithink part of the problem is also that there are several wireless networks around my house that could be interfering and the walls are thick here.
Anyaway, moving on now :) The default is 28mW and I increased it to........
Linux Kernel v2.6.30.3
102220 blocks
CHK include/linux/version.h
CHK include/linux/utsrelease.h
SYMLINK include/asm -> include/asm-x86
CALL scripts/checksyscalls.sh
CHK include/linux/compile.h
CC drivers/net/igb/igb_main.o
drivers/net/igb/igb_main.c: In function `igb_up':........
This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far:
You can purchase an "M-Zone" China Mobile pre-paid SIMCard from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all. At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........
I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems.
DRBD
I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........
Loaded plugins: fastestmirror
rpmdb: mmap: No such device
error: db4 error(19) from dbenv->open: No such device
error: cannot open Packages index using db3 - No such device (19)
error: cannot open Packages database in /var/lib/rpm
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py&qu........
This is pretty bad, ever since my phone has been unlocked the battery life is horrible. Many others have reported this issue on provider unlocked phones and even jail broken phones. We're talking issues as bad as losing 1% every 3 minutes which is what I seem to have observed as well.
For now I'm going to relock the phone, and hopefully a firmware update will address this issue. This is very annoying and it seems apparent this is also happening on 3G phones and that........
Apple crippled the iPhone by not allowing multi-tasking of the non-primary apps. I use SSH a lot and I don't want to close my session just to check my e-mail, etc, now an app found in Cydia called "Backgrounder" allows just that.
Although it's not perfect, we installed the correct one for "3.x" iPhones and hit "Reload SpringBoard" and the hour/circle glass has just been going for minutes.
It seems like it installed fine even with the crash t........
Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore.
A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly.
In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........
As much of a computer nerd as Iam, I'm usually a late adopter to technology for a few reasons. Ifeel most new hyped technologies and electronics are mainly fads, and I'm also cheap.
Adopting later means you avoid the bugs, kinks and most importantly pay the lowest price, that's me being cheap again :)
I never read much about the iPhone but Isaw all the hype around it and until recently I wasn't a big fan of anything Apple until a few years ago I realize........
Igot this after copying a VMWare image onto another machine in Debian.
SIOCSIFADDR No such device eth0 error while getting interface flags
The solution
1.) Find and edit the device line in persisent-net.rules note it will be prefixed with something like z25 or something else.
vi /etc/udev/rules.d/z25_persistent-net.rules
The easiest way is to comment anything out.
If you are feeling........
When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it.
More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things.
Output of /var/log/messages for OCFS2
Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........
Ithink there has been a lot of negative press towards Rackable Systems. We will give their new solution credit that it is marketed very well, and comes prepackaged and ready to go.
But let's cut through the hype of both sides, the people who love this concept and the people who hate it.
What Rackable Systems have done is a first, to minimize space, power and costs into small servers. This is great, and many companies have already built their own servers based........
At this time we can't resolve Enom's website and all DNS requests to their 4 primary name servers are failing, although the hostnames themselves still resolve:
Name Server: DNS1.NAME-SERVICES.COM
Name Server: DNS2.NAME-SERVICES.COM
Name Server: DNS3.NAME-SERVICES.COM
Name Server: DNS4.NAME-SERVICES.COM
Name Server: DNS5.NAME-SERVICES.COM
You would really think Enom, bein........