/ - rtt - IT Resource

  • systemd management using systemctl and journalctl to check systemd logs


    systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system. The key commands or arguments you will use with systemctl are the following: Unit Commands:   list-units [PATTERN...]         List loaded units &nbs........
  • Centos 7 - Convert Minimal to Graphical GUI GNOME or KDE Desktop


    Did you just install the minimal version by accident or want to install the GUI?  No need to reinstall just tell yum to do the work for you! You could actually have both installed and choose one as your preference on demand (although many people prefer GNOME's simplicity). Step 1.) Install Gnome and/or KDE. To install the GNOME Desktop on Centos 7: yum -y groups install "GNOME Desktop" To........
  • HP DL385 G7 Linux BIOS Update Flash


    wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe --2018-08-16 05:11:16--  https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85 Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1525561 (1.5........
  • hwloc-nox set CPU affinity in Linux


    sudo apt-get install  hwloc-nox Reading package lists... Done Building dependency tree       Reading state information... Done The following NEW packages will be installed:   hwloc-nox 0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded. Need to get 151 kB of archives. After this operation, 453 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubunt........
  • gvfs mount in /run/user cannot be accessed or displayed wrong permissions


    The folder contents could not be displayed Backend currently unmounting drwx------ 10 userhere group  260 Aug 23 19:40 .. ??????????  ? ?   ?      ?            ? sftp:host=192.168.8.80,user=adhoc ls: cannot access 'sftp:host=192.168.8.80,user=adoc': Input/output error $ ps aux|grep fuse one       253........
  • VMWare ESXi 6.7 SSH/PowerShell CLI Commands


    [root@localhost:~] BootModuleConfig.sh          echo                         host-ind                     nfcd                   ........
  • gmail.com address failing in Postfix


    Aug 10 01:11:54 mailserver postfix/smtp[6180]: 020AE17C2BD1: to=<theuserperson@gmail.con>, relay=none, delay=0.29, delays=0.28/0/0/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=gmail.con type=A: Host not found) A user complained that their e-mails weren't being delivered but they actually made a small typo and used gmail.con so it wasn't working as expected of course........
  • Postfix How To Change Sending IP Address To Specific IP Binding or Interface


    I thought I'd post this becuase there is some bad information out there.  Some guides tell you to edit /etc/postfix/master.cf (-o smtp_bind_address=) but this doesn't work.  The same guide also says if you don't change it there you end up changing the listening IP/bind interface which is also not true. Here is a simple and effective way to change Postfix's sending/binding/outgoing IP address (very important for reverse DNS and so mail servers don't block you)........
  • NFS Share Won't Mount Solution - mount: wrong fs type, bad option, bad superblock on 10.10.2.20:/tmp/nfsmount


    nfs mount failed: mount 10.10.2.20:/tmp/nfsmount /mnt/nfs/ mount: wrong fs type, bad option, bad superblock on 10.10.2.20:/tmp/nfsmount,        missing codepage or helper program, or other error        (for several filesystems (e.g. nfs, cifs) you might        need a /sbin/mount.<type> helper program)       ........
  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
  • Cannot create gradle for conversations


    The main issue is it looks like Java is not configured to accept the invalid ssl cert that is coming from the download location. Exception in thread "main" java.lang.RuntimeException: javax.net.ssl.SSLException: java.security.ProviderException: java.security.InvalidKeyException: EC parameters error  export ANDROID_HOME=/home/user/Downloads/tools/ Conversations-master$ ./gradlew Downloading https://services.gradle.org/distributions/grad........
  • postfix errors fatal: no SASL authentication mechanisms /usr/libexec/postfix/smtpd: bad command startup -- throttling solution


    Jul  3 22:12:17mailserver postfix/smtpd[6195]: fatal: no SASL authentication mechanisms Jul  3 22:12:18mailserver postfix/master[4881]: warning: process /usr/libexec/postfix/smtpd pid 6195 exit status 1 Jul  3 22:12:18mailserver postfix/master[4881]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling This only ever happens in my experience when the authentication method is actually Dovecot.  Usually the problem........
  • OpenVPN cannot ping remote IP routing loop issue after connecting


    Sometimes if you have a very basic configuration OpenVPN on the client side for some reason sends all traffic to the OpenVPN server IP through the tun0 which is of course impossible and creates a block or routing loop.  This is because you need to use your normal ISP/LAN gateway to hit the OpenVPN server if it is remote/offsite as is usually the case.  So if you are connected to the OpenVPN through say a tun0 device and your routing is set to connect to the OpenVPN&nbs........
  • Linux Mint Black Screen after boot no graphics solution


    This is not the normal "black screen" issue and I was shocked to eventually find out why.  The normal advice of reconfiguring Xorg didn't work.  Even booting into "Recovery Mode" did not help. Here is the short end of the stick that fixed it: sudo apt-get install mdm mate-desktop-environment Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled.  This must be whe........
  • Centos PXEBoot NetInstall Failure - Pane is dead


    ValueError: new value non-existent xfs filesystem is not valid as a default fs type Pane is dead From what I read this is misleading and has to do with the fact that the initrd and kernel are mismatched. This is a hard situation because for some older hardware I am using the Centos Plus kernel which has modules that I require for an older server/NIC.  This seems to have cropped up in the past few months and there is no simple fix........
  • Intel NUC J3455 Linux Kernel freeze slowness 4.4.98 errors


    It looks like this has something to do with APIC but I am not sure.  I have similar CPUs with a different MB and BIOS that work fine on the same type of kernel.  A lot of time the issue is because of the C-step setting in the BIOS. The same thing happened on the 2.6 kernel with Centos 6 but this is a homebrew 4.4 kernel so I am not sure why it is happening when even Centos 7 (3.2) kernel works OK. Solution - It comes down to the BIOS set........
  • SMF Forums / Simple Machines Forums Not Displaying Images Theme or Styles Properly using 127.0.0.1


    This is one thing that has me wondering about SMF.  It is apparently a known issue but in the latest version and new install nothing looked right because it was using http://127.0.0.1 to find everything!  How on earth would it ever do this or think it is normal? Excerpt of crazy html code it produces that causes the issue:     <link rel="stylesheet" type="text/css&qu........
  • samba how to listen on specific IP only


    This is useful for security purposes especially on a server which may have a public IP assigned to it but has a second NIC for the LAN. Here is how you edit smb.conf: [global] interfaces = 192.168.1.50 bind interfaces only = yes As you can see above it will only listen on 192.168.1.50 and remind to keep the "bind interfaces only" option.........
  • How To Install Windows Server 7 8 10 12 2008 2012 2014 2016 Servers Desktops using Linux tftp, dhcpd and samba


    It has been a big pain for a long-time to install Windows from a Linux environment.  I used to run a windows install server and it never worked right for some reason (the install would fail on most servers). Before getting start be sure to setup your samba share so once you boot into WinPE you can mount the install for whatever Windows you want /etc/samba/smb.conf [smbwinstall] path = /tftpboot/images/winstall guest ok = yes........
  • MySQL Maximum INT Size Truncation Issue/Warning


    MySQL will silently truncate a larger INT than capable. Check MySQL's own documentation here: As we can see the maximum size of INT (which is the most commonly used) is 2147483647 A lot of coders make this mistake by using very large values such as 9999999999 but it would actually truncate to 2147483647 which is the maximum size of an INT.  This is dangerous beca........
  • Install Windows From a Linux TFTP Server instead of using WDS Solution


    yum -y install samba vi /etc/samba/smb.conf https://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-6.03.zip mkdir syslinux;cd syslinux;unzip syslinux-6.03.zip mkdir -p /tftpboot/libs/ cp bios/com32/modules/linux.c32 /tftpboot/libs/ cp bios/com32/libutil/libutil.c32 /tftpboot/libs/ cp bios/com32/lib/libcom32.c32 /tftpboot/libs/ #add lib path echo "PATH libs" >> /tftpboot/pxeli........
  • How To Secure Samba NMBD/SMBD to bind to a specific IP address


    By default Samba SMB/NMB listen on ANY and ALL IPs on your system by binding to 0.0.0.0.  Obviously this is a huge security risk if you have a public facing server with both internal and external access.  Usually when a system administrator sets up a samba server their intention is just to share with a LAN. To do this you need to the following options under the [global] section in smb.conf bind interfaces only = yes interfaces = 192........
  • Linux how to view video card make and exact model


    Normally lspci will show you just like this and would suggest they are exactly the same card: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) 1c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) lspci -vnn is the answer As we can see one is a Gigabyte and the other is an MSI card.  Wha........
  • How to Update Linux /usr/share/misc/pci.ids


    This works with lspci and if it's outdated may not give you the exact manufacturer and device model. For example take these 3 different RX 580's: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) 1b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) 1d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)   You ca........
  • ffmpeg vidstab to stabilize video


    I'm having trouble making it work on very shaky video the result seems kind of warped/blurry/fish eye like and not as good as some other examples I've seen: ffmpeg -i MVI_1285.MOV -vf vidstabdetect=shakiness=10:accuracy=15 -f null MVI_1285.trf ffmpeg -i MVI_1285.MOV -vf vidstabtransform=smoothing=30:input="transforms.trf" MVI_1285.MOV.mp4 I've played around with the shakiness, accuracy etc.. but not the smoothing part.........
  • [Wed Sep 20 15:34:44 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Wed Sep 20 15:34:44 2017] [error] Init: Unable to read server certificate from file /www/ssl-certs/server.crt [Wed Sep 20 15:34:44 2017] [error] SSL Library Err


    [Wed Sep 20 15:34:44 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Wed Sep 20 15:34:44 2017] [error] Init: Unable to read server certificate from file /www/ssl-certs/server.crt [Wed Sep 20 15:34:44 2017] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag [Wed Sep 20 15:34:44 2017] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error........
  • iptables v1.4.7: can't initialize iptables table `NAT': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded.


    iptables -t NAT -A PREROUTING -s 24.30.44.0/24 -j DNAT --to-destination 10.10.10.1 iptables v1.4.7: can't initialize iptables table `NAT': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Solution # it is case sensitive "nat" and DO NOT use "NAT" or you will get this error! iptables -t nat -A PREROUTING -s 24.30.44.0/24 -j DNAT --to-destination 10.10.10.1........
  • Linux Unable to mount cifs/smb share in /etc/fstab


    sudo mount -a Unable to find suitable address. [35758.706993] CIFS VFS: Error connecting to socket. Aborting operation. [35758.707247] CIFS VFS: cifs_mount failed w/return code = -111 [35795.476160] CIFS VFS: Error connecting to socket. Aborting operation. [35795.476346] CIFS VFS: cifs_mount failed w/return code = -111 When the above happens "Unable eto find suitable address" it usually means the smb nam........
  • kdenlive titles/text renders as white screen when using .sh script


    When using the .sh script the rendering doesn't work after an upgrade of related packages to kdenlive.   kdenlive (kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1)) with affine or composite transitions was fine but is now broken during the time of transition it is just a white screen. The previous version was fine: kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1 But now I can't find it or install it:........
  • Wine uninstalled broken on Linux Mint


    Solution: Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt sudo aptitude install wine The following NEW packages will be installed:   ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6   wine1.6-amd64{a} wine1.6-i386:i386{a} The following packages will be REMOVED:........
  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd  ffmpeg-3.3.2/ ./configure --disable-yasm install prefix            /usr/local source path              ........
  • Centos 7 Cudaminer Nvidia setup guide


    I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us   yum install automake curl openssl-devel libcurl-devel gcc gcc-c++ yum -y install kernel-devel-`uname -r` yum -y install unzip #the........
  • Why won't my Linux Mint boot after I manually installed a new kernel?


    Why won't my Linux Mint boot after I manually installed a new kernel? eg. apt-get install linux-image-newerone Do this   dpkg -l|grep linux-image|grep extra ii  linux-image-extra-3.16.0-38-generic                         3.16.0-38.52~14.04.1     &nb........
  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes.  The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........
  • USB Device/MP3 Player not working properly and can't browse the device filesystem? Check the cable twice and again!


    Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short.  These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues.   Take for example the error messages from Linux Mint: [804829.895414] usb 1-1: USB disconnect, device number 11 [806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........
  • Wifi Antenna Extension Cable is called RP-SMA


    This sounds silly but if you don't know you don't know and the cable name is "RP-SMA" and allows you to extend your wifi antenna as long as the cable goes.........
  • Centos 7 Migration Guide from Centos 6


    Centos 7 is no cakewalk, there are many fundamental features and basic utilities that are missing or even completely renamed or different! Another shocking thing is to check your NIC it is set by default to not turn on when booting! And by the way there is no more standard eth0 the NIC convention is now "enp0s3" vi /etc/sysconfig/network-scripts/ifcfg-enp0s3........
  • How to verify SSL SHA-1 Certificate Fingerprnit Signature of your mail/web server to avoid hijacking/man-in-the-middle attacks


    This is especially helpful if you run your own servers.  If you are presented with an error message or warning that the signature has changed or does not match the IP/domain you are connecting to you always want to verify manually. So your e-mail/web client will show you an SHA-1 fingerprint like this: "Could not verify this certificate because the issuer is unkown" or other reasons such as a mismatch in IP/domain. It will also show you........
  • Linux SAMBA does not work with symlinks


    At first I thought it's just not possible but there is actually an option that can be enabled to make symlinks work with Samba. Then I put this under the [global] section Note: It's "wide links" and not "wide symlinks" (some other sites have incorrect info which was a frustrating waste of time :))   Add this to your smb.conf follow symlinks = yes wide links = yes unix ex........
  • mdadm frozen and doesn't realize array is dead/missing failed due to unplugged drives


    This was a surprising bug but I unplugged all drives for an array md127.  At first it was just 1 drive and mdadm seemed to notice this.  I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it.  This created problems trying to unmount it or even to stop this array with mdadm freezing.  As for how to fix it I can only think of making sure you are not in a mounted path of........
  • Unable to mount location Failed to retrieve share list from server: No such file or directory solution


    Cannot even "Browse Network" when clicking on "Windows Network" Unable to mount location Failed to retrieve share list from server: No such file or directory logs: [2017/02/14 00:16:44.271314,  0] ../source3/nmbd/nmbd.c:58(terminate)   Got SIGTERM: going down... [2017/02/13 17:35:41.797944,  0] ../lib/util/become_daemon.c:124(daemon_ready) &........
  • Centos 5 OpenSSL does not support TLS 1.2 Apache Error


    [Thu Jan 26 14:13:31 2017] [notice] caught SIGTERM, shutting down [Thu Jan 26 14:14:00 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Jan 26 14:14:00 2017] [error] Server certificate is expired: 'Server-Cert' [Thu Jan 26 14:14:00 2017] [notice] SSL FIPS mode disabled [Thu Jan 26 14:14:07 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Jan 26 14:14:07 2017] [error] Server certificate is expired: 'Server-Ce........
  • The folder contents could not be displayed connection refused - solution


    This happened while updating Linux Mint/Debian/Ubuntu on a remote SMB/Samba share. Solution After waiting for updates to complete things will work normally but it really is strange that the service actually stops working or is disabled for so long during the update.  It is likely the update process stops the serivce and only restarts after the update is complete.........
  • Nvidia Linux Card not working due to LSI 9200/SAS2008 IRQ conflict


    At first my BIOS said the card may not work right because there is no more option ROM space. I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly. But it still cannot initialize the card properly (does not work): [   33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........
  • Linux Mint/Ubuntu/Debian Dual NICs networks problem when enabling and disabling one device


    The Scenario You have dual NICs and you disable NIC1 which uses 192.168.1.1 as its gateway.  With NIC2 you enable it/connect it to another network which also has the gateway 192.168.1.1 Everything will work fine at this point. When switching back to NIC1 even with NIC2 disabled and even unplugged, the OS basically can't pick up the new/updated ARP entry of the old device for 192.168.1.1 and perhaps thinks it is a security risk or spoof of some sorts and blocks i........
  • Debian Ubuntu Mint Samba Share config file location


    /var/lib/samba/usershares But note that it is just simple file sharing if you need directory mask, create mask etc... you still need to edit the smb.conf file to create your share. Here is an example file: comment= usershare_acl=S-1-1-0:R,S-1-22-1-1000:F guest_ok=y sharename=BabyPhotos........
  • Mount a SMB Samba share in fstab Linux Debian/Ubuntu/Centos


    Add the following to fstab where 192.168.1.125/Media is the samba share and where /home/homeuser/Downloads is where you want to mount. Change user and pass to what is needed (if no pass is required it still works fine with the below). //192.168.1.125/Media /home/homeuser/Downloads cifs        user=guest,pass=bla 0 0 mount: wrong fs type, bad option, bad superblock on //192.168.1.125/Media, &nbs........
  • bash script Get Model and Serial Number of All Hard Disks in Server on Linux


    for disk in `fdisk -l|grep "Disk /dev"|awk '{print $2}'|sed s/://g`; do echo "$disk" && smartctl -d ata -a "$disk" -T permissive|grep -iE 'Device Model:|Serial Number:' echo "---------------" done *Make sure you have smartctl from smartmon tools installed   Sample output: /dev/sdc Device Model:   ........
  • mdadm create raid10 array with only 2 drives


    mdadm --create /dev/md1 --level 10 --raid-devices=2 /dev/sdb2 /dev/sdc2 --layout=f2 --metadata=0.90 Note that layout=f2 or layout=n2 is very important as without it you'll get a complaint like this: mdadm --create /dev/md0 --level 10 --raid-devices /dev/sdb1 /dev/sdc1 missing missing mdadm: invalid number of raid devices: /dev/sdb1 It is basically more like a prop........
  • Dell CS24-NV7 lspci dmidecode info


    0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2) 0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3) 0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3) 0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1) 0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2) 0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 0000:00:05.1 I........
  • Unable to configure RSA server private key SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch


    [Tue Jun 23 02:05:52 2015] [error] Unable to configure RSA server private key [Tue Jun 23 02:05:52 2015] [error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch The above is an accurate description of what is wrong. In our case the client made a simple mistake of thinking the localhost.crt and localhost.key (default key locations for Apache SSL in Centos) were in the same directory but they we........
  • Dell CS24SC Server Info


    Dell CS24SC Info 0000:00:00.0 Host bridge: Intel Corporation 5100 Chipset Memory Controller Hub (rev 90) 0000:00:02.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x8 Port 2-3 (rev 90) 0000:00:03.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 3 (rev 90) 0000:00:04.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x16 Port 4-7 (rev 90) 0000:00:05.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 5 (rev 90)........
  • Dell CS10-F1D Server Info lspci Linux specs


    0000:00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1) 0000:00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) 0000:00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) 0000:00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1) 0000:00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4........
  • VPN Account Buyers Guide and General Info


    What does VPN stand for? VPN stands for Virtual Private Network and is a secure way of connecting networks and devices. In the context we're talking about it will usually be a client-server solution and not connecting whole networks or businesses. The assumption is that most people reading this are trying to secure their internet connection, privacy and hide or change their IP address. Why use a VPN? There are many........
  • OpenVZ vzctl update changes how iptables work - iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. updated solution


    Are you getting the same old error message even though your iptables settings for OpenVZ are correct? iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. The reason is because in newer vzctl  the old way of setting IPTABLES="" in vz.conf is completely deprecated (I spent some time fiddling wondering why my settings were correct but........
  • Wordpress Plugin manual install how-to


    This is the most secure way since we don't know if using the built-in ftp method of Wordpress is secure (that is do they store, record or transmit the ftp login information to a third party like the NSA?). Upload or wget the plugin and then unzip it from the Wordpress website tot he following path of your wordpress: /yourwordpressinstall/wp-content/plugins Then navigate to the "Plugins" section on the left side o........
  • Openvz iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. solution


    iptables -t nat -A PREROUTING -p tcp -m tcp -d 192.168.2.1/32 --dport 3389 -j DNAT --to-destination 192.168.5.2:3389 iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. The above is often because you don't have the correct modules loaded on the hostnode or enabled for the container but in some cases it's actually a weird openvz setting. Che........
  • Postfix how to secure outgoing authenticated e-mails for privacy and hide the IP address, mailer and other things


    The most common solution is to use the /etc/postfix/header_checks but this is a big problem. Why is header_checks a problem?  Because it does it to all mail whether incoming or outgoing and whether authenticated or not.  We of course want as much header information for incoming as we can get for many reasons but many organizations want to secure and make their mail clients as secure as possible. I adapted this solution to the client's custom config, they are configur........
  • mytop install errors


    mytop-1.4-2.el5.rf.noarch from rpmforge has depsolving problems   --> Missing Dependency: perl(DBI) is needed by package mytop-1.4-2.el5.rf.noarch (rpmforge) solution: #disabling excludes is required on CPanel type boxes which exclude most updates including perl-DBI  yum --disableexcludes=main install perl-DBI mytop-1.4-2.el5.rf.noarch from rpmforge has depsolving problems   --> Missing Dependency:........
  • OpenVZ mismatched kernel and dev when compiling.


    ./configure ./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory Error: kernel version not found. Please make sure your kernel is configured. dr-xr-xr-x.  4 root root   4096 Feb 21 06:13 .. lrwxrwxrwx   1 root root     45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25 drwxr-xr-x   2 root root   4096 Feb 12 20........
  • CPanel Apache httpd won't start solution: Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf: Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration


    root@hkhosting [/]# service httpd start Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf: Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration                                           ........
  • Asterisk iptables block bruteforce attacks howto with fail2ban


    yum -y install fail2ban vi /etc/fail2ban/jail.conf [asterisk-tcp] enabled  = true filter   = asterisk action   = iptables-multiport[name=asterisk-tcp, port="5060,5061", protocol=tcp]            sendmail-whois[name=Asterisk, dest=you@example.com, sender=fail2ban@example.com] logpath  = /var/log/asterisk/messages maxret........
  • Centos 6 samba server not showing up in WORKGROUP


    This is different than Centos 5, you have two services btu they are called "smb" and "nmb". You need to enable and start "nmb" in order for your samba server to be listed. chkconfig nmb on; chkconfig smb on service nmb start;service smb start........
  • kvm centos cannot compile error


    ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install gcc make ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install compat-gcc-* ./configure Error: Could not find alsa Make sure to have the alsa libs and headers installed. yum -y install alsa-lib-devel ./configure........
  • Openvz OOM Centos Issue Memory Config Settings Solution


    Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux even setting privvmpages to a specific setting DOES not affect "free -m" in containers. This is probably a kernel issue  23:36:29 up 159 days,  7:12,  4 users,  load average: 0.42, 0.44, 0.33 [root@box13 ~]# free -m              total  &n........
  • Unixbench Testing


    The first is a dual CPU AMD Opteron 2373EE (4 cores x 2) and I think it did bad because it has some old 250GB SATAs which can only do about 65 MB/s max sequential reads.  I think it should have blown away the second (AMD X4 640 Quad Core).   [root@fs12home unixbench-4.1.0-wht-2]# ./Run make all make[1]: Entering directory `/root/unixbench-4.1.0-wht-2' Checking distribution of files ./pgms  exists ./src  exists........
  • Sendmail Gmail.com blocking


    relay=alt4.gmail-smtp-in.l.google.com. [74.125.136.26], dsn=4.0.0, stat=Deferred: 421-4.7.0 [      10] Our system has detected an unusual rate of This is strange because the mail server IP is not blacklisted anywhere and the IP itself has not been used for years and this server is clean and has only sent a few e-mails to gmail.com in its entire time. I wonder if this is a legacy block on a whole range of IPs as punishment for others in the block........
  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........
  • Dell Perci 6/i Firmware Upgrade Guide Tutorial


      One thing to remember is that you need MegaCli to do the flashing. You also need the correct file, I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli (they were really the wrong version).  I have an external PCI-E Dell 6 Perc/I but I chose images from the 'Integrated" on motherboard version as it was all I could find.  They are different, and below is my first time finding success.........
  • Dell Perc 6/i cannot downgrade


    I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally. I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN --2013-08-26 12:53:39--  http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN Resolvi........
  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group.  In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
  • pxe-32 tftp open timeout


    pxe-32 tftp open timeout   The solution was to enable tftp in xinetd with "chkconfig tftp on". See the troubleshooting below:   chkconfig --list NetworkManager     0:off    1:off    2:off    3:off    4:off    5:off    6:off acpid              0:off&n........
  • package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture solution


    package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture Linux etc 2.6.18-274.7.1.el5xen #1 SMP Thu Oct 20 17:06:34 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux As you can see above architecture and kernel is 64-bit but I had to force it to install using "--ignorearch" Solution #rpm --ignorearch -ivh kernel-xen-2.6.18-274.7.1.el5.x86_64.rpm Preparing...    &nb........
  • openoffice calc printing extra blank pages


    Make sure that the Page mode is set to landscape and that the columns fall within the margins/boundaries, otherwise this is why there will be blank pages (Print Preview will show you this too).........
  • WD 20EARX Dead Again


    Another new drive bad from the start:   Jun  2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen Jun  2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error Jun  2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC } Jun  2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........
  • WD 20EARX 2TB Bad within days


    This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds.  Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad. ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0 ata1.00: irq_stat 0x40000008 ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/00:00:........
  • Country List Names in HTML Select From


    This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others:   <select name='country'><option value=Choose>Choose Country</option><option value=CA>Canada</option><option value=JP>Japan</option><option value=US>United States</option><option value=GB>United Kingdom</option><option value=AF>Afghanistan</option><option value=AL&........
  • postfix/dovecot Sent emails missing sometimes


    On occassion and from a variety of networks and clients, Sent messages don't get saved. I'm wondering if these log messages could be why: May  3 14:16:39 mail.box postfix/smtpd[5195]: connect from 192.168.1.58 May  3 14:16:39 mail.box postfix/smtpd[5195]: SSL_accept error from 192.168.1.58: -1 May  3 14:16:39 mail.box postfix/smtpd[5195]: lost connection after CONNECT from 192.168.1.58 May  3 14:16:39 mail.box postfix/smtpd[5195]:........
  • SMARTCTL Enable SMART on Device Solution for Error "Device does not support SMART Error Counter logging not supported"


    smartctl -a /dev/sda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: ATA      WDC WD1600YS-01S Version: 20.0 Serial number:      WD-WCAP03024940 Device type: disk Local Time is: Mon Apr 29 21:40:07 2013 PDT Device does not support SMART Error Counter logging not supported........
  • Samsung Galaxy Note I717M Canadian Version, Root and Unlock


    I chose this because I heard a lot of stories about scams and that many providers I contacted said they can't unlock the Canadian I717s (one said "my Bell server" is down).  This method worked perfectly on my Bell I717M and should work for all I717 in Canada, I was able to insert a foreign SIM card.  This will work abroad too but remember entering CWM mode is different for I717's in other countries (at least the US). Step 1 - Root + CWM........
  • Bad Hard Drive Slows Down Computer


    Here's a proven example of what a bad hard drive can do, it was technically functioning OK in a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application.  The truth is that this failing 1TB Hitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..).  After swapping it out, tabs change instantly, emails are not lagged, and........
  • Hitachi Serial Numbers for Hard Drives without seeing the physical drive


    Here's what SMART tells me the serial number is: === START OF INFORMATION SECTION === Device Model:     Hitachi HDS721010CLA332 Serial Number:    JP2940HQ3ZY7KH Firmware Version: JP4OA3EA User Capacity:    1,000,204,886,016 bytes Device is:        Not in smartctl database [for details use: -P showall] ATA Version is:   8 ATA Standard is:&nb........
  • iptables v1.4.10: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)


    I have iptable_filter loaded on the hostnode so I don't understand this issue.........
  • Samba Solution To Error "[2013/02/22 19:06:37.373564, 0] param/loadparm.c:8004(lp_do_parameter) Global parameter guest account found in service section!"


    [2013/02/22 19:06:37.373564,  0] param/loadparm.c:8004(lp_do_parameter)   Global parameter guest account found in service section! This is annoying but the solution is simple: The line "guest account = " is in the section for a share (in /etc/samba/smb.conf), but it should be under globals. Move it under [global] and then everything should be fine.........
  • kvm cannot boot xen guest using lvm


    This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel. I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk. I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one). This is strange but it seems like this Xen PV guest has some sort of hidden or........
  • postfix how to send to multiple recipients default limit of 1000


    The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded:  4.5.3 Error: too many recipients. We set this in main.cf: smtpd_client_recipient_rate_limit=0 We didn't specify it before and the default is said to be 0/unlimited and it still didn't change anything.........
  • iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) - OpenVZ Container Problem iptables module problem solution


    iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) This solution applies to all other iptables modules/problems for OpenVZ, you'll just need to add them to both lists/lines below if you have modules other than what I have below. The modules need to be enabled in both iptables and the OpenVZ hostnode itself and then the containers which need it must be restarted. How To Enable IPTables Modules in OpenVZ........
  • pcnet32: eth0: transmit timed out, status 97fb, resetting - NIC card problem solution


    I've encountered this problem before and I believe it  may affect other drivers (I could test but I don't have time).  This was happening on my custom Linux system with the pcnet32 driver. pcnet32: eth0: transmit timed out, status 97fb, resetting (and some other kernel module tracing in dmesg) Basically it means the card is connected (it shows connected in full duplex etc.. and recognized if the cable is disconnected too) but no packets can be sent or received........
  • LOG: MAIN PANIC failed to expand condition "${if eq {$authenticated_id}{}{0}{${if eq {$sender_address}{$local_part@$domain}{0}{${if match{$received_protocol}{N^e?smtps?a$N}{${perl{checkbx_autowhitelist}{$authenticated_id}}}{${if eq{$received_prot


    I experienced this with CPanel's Exim after an auto-update (a Google of this error produces lots of complaints with few clear solutions).  In this case I'll put the solution at the top. Run /scripts/buildeximconf to rebuild the Exim config and it should be fine after that.   mail -vs "from test" user@dest.com < .bash_history LOG: MAIN   cwd=/root 4 args: send-mail -i -v user@dest.com LOG: MAIN   &........
  • The Importance of a High Quality Power Supply/Power Supplies To Prevent Overheating/System Crash/Hardware Damage


    For years I've always built cheap systems believing that there is little difference in more expensive components when it comes to reliability and quality, I generally believe this still except for Power Supplies. I've always bought cheap cases with nice sounding 350-550W stock/cheap/crap power supplies and haven't had any issues for the most part until recently. One such case is an NGEAR case with a 550W Optimax power supply, I always read that these supplies don't produce the........
  • Linux Ubuntu Nvidia GT430 Lockups/Errors/Freezes NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context


    I'm running Ubuntu 10.10 with Asus NVIDIA GT430 2.6.35-32-generic-pae #65-Ubuntu SMP Tue Jan 24 14:06:16 UTC 2012 i686 GNU/Linux Nvidia binary driver: 260.19.06 The screen sometimes completely freezes and locks up or everything starts going very slow: [1903398.100007] NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context [1903402.373210] NVRM: Xid (0001:00): 53, CMDre 00000000 00000080 00000000 00000005 00........
  • Ubuntu 10 Nvidia Drivers Not Updated After Kernel Update Solution/How-To Manually Rebuild nvidia kernel modules for Ubuntu


    I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene.   This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately). The most common reason may be that "linux-source" hasn't been installed automatically on my system.  I tried to manually reinstall the........
  • mdadm/Debian problem


    This is one in a series of weird things which I thought was motherboard related (I RMA'd the motherboard), the RAM tests fine with memtest86 and I used badblocks on both RAID 1 members with no errors and smartctl is happy with them. Basically the array crashes the kernel a lot and has issues when writing.   [112322.723465] md0: rw=0, want=14958668696, limit=1887460480 [112322.731077] attempt to access beyond end of device [112322.731087] md........
  • samba/smbd connection to share problems and solutions


    I'll start by showing some problems in the logs: [2011/08/07 16:22:06,  0] param/loadparm.c:8569(process_usershare_file)   process_usershare_file: stat of /var/lib/samba/usershares/movie failed. Permission denied [2011/08/07 16:22:06,  1] smbd/service.c:676(make_connection_snum)   create_connection_server_info failed: NT_STATUS_ACCESS_DENIED That means you don't have permission to access the fi........
  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts.  This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
  • smart is not smart, it thinks a dead drive is still good


    I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior:   === START OF INFORMATION SECTION === Device Model:     WDC WD20EARS-00MVWB0 Serial Number:    WD-WMAZ20139 Firmware Version: 50.0AB50 User Capacity:    2,000,398,934,016 bytes Device........
  • GRUB Solution to error "Error 6: Mismatched or corrupt version of stage1/stage2"


        GNU GRUB  version 0.97  (640K lower / 3072K upper memory)  [ Minimal BASH-like line editing is supported.  For the first word, TAB    lists possible command completions.  Anywhere else TAB lists the possible    completions of a device/filename.] grub> root (hd1,0)  Filesystem type is ext2fs, partition type 0xfd grub> setup........
  • Hitachi 2TB HDS5C3020ALA632 drive DOA


    I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead):   ata1: link is slow to respond, please be patient (ready=0) ata1: softreset failed (device not ready) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: link online but device misclassified, retrying ata1: link is slow to respond, please be patient (ready=0) ata1: softreset f........
  • Kernel linux-2.6.39 In file included from drivers/block/cciss.c:1015: include/asm-generic/pci-dma-compat.h: In function `cmd_special_free': drivers/block/cciss.c:196: sorry, unimplemented: inlining failed in call to 'cciss_tag_discard_error_bits': fu


    In file included from drivers/block/cciss.c:1015: include/asm-generic/pci-dma-compat.h: In function `cmd_special_free': drivers/block/cciss.c:196: sorry, unimplemented: inlining failed in call to 'cciss_tag_discard_error_bits': function body not available include/asm-generic/pci-dma-compat.h:25: sorry, unimplemented: called from here make[2]: *** [drivers/block/cciss.o] Error 1 make[1]: *** [drivers/block] Error 2 make: *** [drivers] Error 2........
  • SMARTCTL additional SMART command testing using short and long tests


    smartctl -t long /dev/sda (note you can specify short, but it's not as thorough as long of course). smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended sel........
  • Enable SPAMASSASSIN on Postfix in 5 minutes


    Centos 5 Postfix and SPAMASSASSIN Tutorial yum install spamassassin chkconfig spamassassin on vi /etc/mail/spamassassin/local.cf ############## #required_hits 5 #report_safe 0 #rewrite_header Subject [SPAM] #5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives require........
  • email server messsages rejected without reverse DNS DNS check failure Client host rejected: cannot find your reverse hostname Cannot resolve PTR record


    Basically you should always be 100% sure that whatever IP your mail server sends out with has reverse DNS/PTR records.  Remember that unless you own your IPs then you won't be able to set your own reverse DNS.  Even if you were to create a reverse PTR record on your DNS servers it will be ignored. Reverse DNS is queried to pre-assigned DNS servers of your ISP, so therefore you'll need to contact your ISP/Colo/Hosting provider to do a reverse DNS entry. If you don't have........
  • Postfix Enable SSL/TLS with your certificate


    Create Cert & Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key mkdir /etc/mailssl chmod 700 /etc/mailssl cp server.* /etc/mailssl Postfix SSL config Edit /etc/postfix/main.cf: #SSL stuff smtpd_tls_cert_file = /etc/mailssl/server.crt smtpd_tls_key_file = /etc/mailssl/server.key To make smtps w........
  • Understanding /etc/aliases from sendmail when using with postfix or other MTA's


    understanding /etc/aliases *remember to apply changes you need to run "newaliases" after editing /etc/aliases one thing I don't get is that it doesn't allow you to specify the whole e-mail address on the left-hand side eg: yourfullemail@domain.com: someotheremail@domain.com postalias: warning: /etc/aliases, line 109: name must be local (if you try the above) It works more like this: your........
  • Ubuntu 9.04 Crash


    CPU/Kernel/MB/RAID problem? Jan  5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168] Jan  5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........
  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM.  The only way to make it work was to disable i386 packages since this was an x64 kernel.  That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two.  I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........
  • WD EARS/Green 2TB Cannot Disable Power Saving/Head Parking with hdparm


    hdparm -B 255 /dev/sdb /dev/sdb:  setting Advanced Power Management level to disabled  HDIO_DRIVE_CMD failed: Input/output error   The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well).  -S   set standby (spindown) timeout   hdparm -S 251 /dev/sda /dev/sda:  setti........
  • WD (Western Digital) Advanced Format Drive Lagged/Slow Speed/Performance/Design Flaw EAD/EARS problem WDC WD20EARS-00S8B1


    Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks.  What a stupid "Green" design and design flaw which will probably mean an early life for the drive. This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series. To make it worse this is also when Western Digital introduced "Advanced Format" o........
  • Wine stopped working/won't work Solution


    After an upgrade wine wouldn't open anything, not even the pre-installed notepad. There are no wine logs and nothing is mentioned in any standard log file about why. I finally decided to run wine from the shell and see what's going on: wine client error:0: version mismatch 398/402. Your wineserver binary was not upgraded correctly, or you have an older one somewhere in your PATH. Or maybe the wrong wineserver is still running?........
  • HeartBeat Error/High Load heartbeat: [7120]: WARN: Gmain_timeout_dispatch: Dispatch function for retransmit request took too long to execute: 20 ms (> 10 ms) (GSource: 0x926b390)


    My LOG is flooded with those messages many times per second. I don't know what is wrong with heartbeat, but restarting the service fixed it.........
  • Linux Kernel Freeze/Hang during boot on io scheduler cfq registered (default)


    You'll see the following and the boot process will freeze: io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) I have struggled with this issue on vari........
  • How to Enable SMART on a device


    smartctl -a -d ata -T permissive --smart=on /dev/sda -d ata is usually required for most SATA drives or you get an error. -T permissive is required if it's the first time you are running SMART on this device (it's not enough just to enable SMART in the BIOS) --smart=on is also required for the first time........
  • OpenVZ iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Solution


    This error is annoying, in a Virtuozzo KB entry about this ip tables nat problem they say the kernel needs to be ugpraded: Symptoms The node runs 2.6.18-x kernel older than 2.6.18-028stab053.10. NAT module does not work in container, you get "can't initialize iptables table 'nat'" error: # iptables  -t nat ........
  • mencoder Linux CLI video editing how to encode video file into xvid and split by time into multiple parts


    Mencoder is great, you can throw anything at it, including video files from your camera and have it encode into xvid or almost any other format. In my case I took 640x480 video from my Canon and reduced the size by 1/3 with the options below (there are many other options that you can read about in the manual but I like to keep it simple).  Mencoder Encode mencoder <filename.avi> -ovc xvid -oac mp3lame -xvidencopts fixed_quant=4 -o <output.avi>........
  • Realtek r8169 1gbit/1000mbit NIC/Ethernet Goes Down/Halts on Large File Transfer/Heavy Network Usage


    This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people.  I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error.  This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason?   [655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........
  • Centos 5.5 RAID 1 boot issue


    I installed 5.5 with a 300GB RAID 1 partition (boot is also on this partition).  It booted up fine the first few times until after I used a Live CD and accessed the array, and it became named /dev/md127 for some reason. Now whenI boot into CentOS I get a kernel panic and different errors, once I got "invalid superblock", even though the array is fine (it didn't happen again, probably because I was sure to dismount and stop the mdadm array properly). Here's what........
  • Asus O!Play cannot access network/workgroup shares


    It always worked fine before but no amount of power unplugging/cycling does any good.  I can access one network share and that is one that I've already saved, but it can't see any workgroups. One silly thing is why is there no option to manually connect to a netbios name or IP? It seems there is a bug with the firmware and that the SMB client is not working properly.  Hopefully it fixes itself at some point. Between this and the lack of support for embedded s........
  • Unixbench Score on Core i5 750 with OpenVZ Kernel vs Xen/Openvz


    This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ.  You can see the performance difference is nearly 300% better when not using the Xen kernel. OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!)    #    #  #    #  #  #  &n........
  • Windows install blue screen of death caused by faulty optical/DVD-RW drive.


    I took an educated guess because it kept happening at the same spot when loading the XP install.  I thought it was the hard drive or motherboard. But it turns out my heavily used but loved NEC 3500 DVD-RW drive was the culprit.  After disconnecting it and swapping it for another much beloved Pioneer DVD-RW, everything has gone smoothly. I never ran into this or many issues because I've hardly used this drive since moving it to another Desktop years ago.  I actua........
  • get_printer_attrs: resource name '/printers/printers' no good! - cups error


    This is what the /var/log/cups/error.log says after my Samsung CLP-310N decided to stop printing.  This is a new printer that replaced my CLP-300 and it has been working for a day so far. What happened is that I lifted the top part (not realizing there were rollers on it) and it stopped printing. The network activity light was flashing ,hitting the stop button didn't do anything.  Even powering the printer on and off did not help. I have restarted CUPS and SMB on the........
  • Seagate Drive 500GB Drive Dying


    This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned.  I didn't blame Seagate for their past issues until now.  This hard drive has hardly been used and has not even been powered on for a year according to SMART. Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family:     Seagate Barracuda 7200.11 Device........
  • Seagate 7200.11 firmware defect in 500GB, 1000GB (1TB) and 1500GB (1.5TB) Hard Drives


    Seagate Inventory/Firmware Check I heard about this issue a long time ago but never looked into it.  I figured I wasn't affected since my 500GB drives were running for so long.  I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate. *Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate! Seagate Inventory/Firm........
  • tar gzip: stdout: File too large - Error Size Limit on Large file > 17GB


    The folder I was trying to archive is about 72GB, but much like rsync at about 17GB it chokes because of the filesize.  What's with so many common and essential Linux tools having such limitations?  I guess it is likely that the authors never wrote their code with the idea that files would be so large but it's still very annoying.  It's important to stay on top of these limitations on production servers because I didn't realize what happened until I checked the file with "........
  • Compaq V2405CA Laptop - Unixbench Performance Test


    Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics.      #    #  #    #  #  #    #          #####   ######  #    #   ####   #    #    #    #  ##   #  #   #  #&nb........
  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
  • Great sound tutorial


    Great sound tutorialThis is great if you need users to be able to start/stop playing sound on your page with the click of a button. http://www.smartwebby.com/Flash/sound_button.aspHere's a simple one except that it doesn't do rollovers. http://www.flash-here.com/tutorials/flash_play_sound.html I actually could not get the rollovers to work using the other tutorial so it is either a mistake on the webmaster's part or........
  • How to extract files from RPM & SRPM files


    How to extract files from RPM & SRPM filesmkdir any_directory cd any_directory rpm2cpio /location/of/package.src.rpm | cpio -d -i This will extract all files, I find it especially useful if you want to manually compile the kernel source from the srpm........
  • Centos 4.3 x64 & VMWare Server Beta


    Centos 4.3 x64 & VMWare Server Beta[code:1:6d0b2c8c2f] The correct version of one or more libraries needed to run VMware Server may be missing. This is the output of ldd /usr/bin/vmware: linux-gate.so.1 => (0xffffe000) libm.so.6 => /lib/tls/libm.so.6 (0xf7fbd000) libdl.so.2 => /lib/libdl.so.2 (0xf7fb9000) libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fa7000) libX11.so.6 => not f........
  • Upgrade Release Kernel Tips


    Upgrade Release Kernel TipsThis is for CentOS 3.1 to 3.8 but the methodology will apply everywhere. I ran into a problem first of all with a non-booting system after running #yum update centos-release It took me to 3.8 and upgraded all the other packages [b:7e931c835d]BUT[/b:7e931c835d] because of some stupid flags enabled in /etc/yum.conf the KERNEL WASN'T UPGRADED SO AFTER BOOTING, WELL IT DIDN'T BOOT OF COURSE :) H........
  • How to compile in Windows/DOS


    How to compile in Windows/DOSMingW is a free compiler project so start here: http://www.mingw.org/download.shtml#hdr2 I downloaded the core GCC compiler: http://prdownloads.sf.net/mingw/gcc-core-3.4.2-20040916-1.tar.gz?download But it's missing even the standard C runtime libraries like "stdio.h"! You may also need to add environment variables from the DOS command line. Here is a simpl........
  • The New Chips on the Block


    The New Chips on the BlockThe New Chips on the Block By Bruce Gain Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html 02:00 AM Jun. 13, 2005 PT We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........
  • MySQL Reserved Words


    MySQL Reserved Wordshttp://dev.mysql.com/doc/mysql/en/reserved-words.html You should familiarize yourself with these because you will have unexpected results if you use any of them. Eg. try creating a table with what you think is valid syntax like this: CREATE Table Order( .......); The word 'Order' is a reserved word and used to ORDER the results so you will get a syntax error from this one and you would think everything is........
  • PHPBB Drop All Tables


    PHPBB Drop All TablesSQL Syntax: [quote:75acd496c1]drop table phpbb_auth_access, phpbb_banlist, phpbb_categories, phpbb_config, phpbb_confirm, phpbb_disallow, phpbb_forum_prune, phpbb_forums, phpbb_groups, phpbb_posts, phpbb_posts_text, phpbb_privmsgs, phpbb_privmsgs_text, phpbb_ranks, phpbb_search_results, phpbb_search_wordlist, phpbb_search_wordmatch, phpbb_sessions, phpbb_smilies, phpbb_themes, phpbb_themes_name, phpbb_topics, phpbb_topics_watch, phpbb_user_group, p........
  • MySQL SELECT with multiple where conditions


    MySQL SELECT with multiple where conditionsI can get a match on rows for now apparent reason [quote:09cf04e097]SELECT * FROM TABLE WHERE field = 'value' & value = 'field' [/quote:09cf04e097] To make it work as expected use 'AND' instead of '&' they seem to have a completely different and unexpected effect. [quote:09cf04e097]SELECT * FROM TABLE WHERE field = 'value' AND value = 'field' [........
  • View Disk Space Usage sorted by the size


    View Disk Space Usage sorted by the sizeUse: [code:1:8f675c5910]du -h | sort -n[/code:1:8f675c5910] The -h in du makes it show Kbytes or Mbytes instead of just bytes making it easier to read. The sort -n will show the files in order of smallest to largest *Note if you specify sort -nr instead then it will show the largest files first.........
  • Basic Port Listing


    Basic Port ListingHopefully someone finds this useful or at least interesting. http://www.sans.org/top20/#u9 Name Port Protocol Description Small services <20 tcp/udp small services FTP 21 tcp file transfer SSH 22 tcp login service TELNET 23 tcp login service SMTP 25 tcp mail TIME 37 tcp/udp time synchronization WINS 42 tcp/udp WINS replication DNS 53 udp naming service........
  • Linux Kernel Compilation (Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support ) Error - drivers/net/igb/igb_main.c: In function `igb_up': make[3]: *** [drivers/net/igb/igb_main.o] Error 1


    Linux Kernel v2.6.30.3 102220 blocks   CHK     include/linux/version.h   CHK     include/linux/utsrelease.h   SYMLINK include/asm -> include/asm-x86   CALL    scripts/checksyscalls.sh   CHK     include/linux/compile.h   CC      drivers/net/igb/igb_main.o drivers/net/igb/igb_main.c: In function `igb_up':........
  • auth/auth_util.c:make_server_info_sam(840) User nobody in passdb, but getpwnam() fails! - SAMBA/SMB Error How To Fix


    auth/auth_util.c:make_server_info_sam(840)   User nobody in passdb, but getpwnam() fails! I never found the solution to this in the web, as usual so I thought I'd post the fix.  In plain English smbd is telling us that the user "nobody" does not exist in /etc/passwd. You can simply add this to your /etc/passwd file like so: nobody:x:65534:65534:nobody:/nonexistent:/sbin/nologin Now SAMBA/smbd should........
  • Adventures in pre-paid SIM Cards and data GPRS/Edge/3G in China with China Mobile in Shenzhen, Guangzhou, Shanghai, Beijing and other cities


    This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far: You can purchase an "M-Zone" China Mobile pre-paid SIM Card from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all.  At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........
  • SAMBA/SMB Share "Write" Access without Delete


    There is a nice mode that Samba supports which you can add to smb.conf create mode=555 This way users can create and write files/directories without deleting (except I believe dirs can be deleted but only if there are no files inside). It's too bad that Linux does not have built-in "write"/"delete" privileges and is something that even Windows 98 can trump.........
  • Hard Drive Not Working/Not Detected By Your BIOS Anymore?


    I was starting to panic because suddenly my 1TB Seagate SATA drive wasn't working, I thought it was a BIOS issue because it seemed to have happened after I tried overclocking my Desktop too much. I tried powering down and waiting, but I still couldn't hear the drive spin up at all.  I tried a second 1TB hard drive and it wouldn't work either.  I checked all power connections again and again until one of the pins in the MOLEX connector popped completely loose. Th........
  • Clustered/Distributed Network Filesystems, Which Ones live up to the hype?


    I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems. DRBD I first started off with DRBD and I have to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........
  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon - Updated with GlusterFS 2.0.8


    You might remember my original GluserFS/OpenVZ benchmark which produced a horrible 29.8 This is the exact same system, but using the latest 2.0.8 (with some small files patch which speeds up performance) you can see it is about 25% faster. I also haven't tuned my config files at all, but there are some settings that should increase performance on small files which I believe i........
  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon


    This is very disappointing since GlusterFS markets itself as a solution to deploy VPS servers on.  On the HN itself I get a Unixbench of about 360. I'm also using an SSH tunnel to secure the communications, but even before that, things seemed very slow.        #    #  #    #  #  #    #          #####&n........
  • iPhone 3GS Jailbreak Information & Benefits


    Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore. A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly. In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........
  • iPhone 3GS 32GB "Harsh Review"


    Yes, I admit I finally got bitten by the hype as much as I can usually see through it all.  Keep in mind this review is of the "stock" phone, no jailbreaking yet which is what really unleashes the customizability and why I bought iPhone. I had better things to say about this phone before buying it, and it is a great phone, perhaps the best on the market by far, if not because of the Mac OS port onto the iPhone and all the apps, etc, etc. With that said........
  • Using a Mac OSX DMG Image in Windows and Converting to Standard ISO Format use dmg2iso


    The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard?  Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso I'll only cover the Linux version although the Windows pre-built binary works the same way. Download dmg2iso here for free (from the author's website) It's just silly and doesn't make sense that Ubuntu doe........
  • Nokia N97 review, feedback and complaints


    I've had an old Blackberry for a few years and I was ready to spend some serious cash on a nice Nokia.  I love the idea of the Linux based Symbian S60 OS, so I was looking at phones like the E63, E71 (both are basically the same, at least CPU/screensize although E71 is thinner, has a 3MP camera, has GPS, and has dedicated buttons to adjust the volume). Then I heard about the N97 and what a revolution it was supposed to be and it was even compared to iPhone.  To........
  • RTL8111/8168B R8169 Gigabit Link slow speeds


    This is the Intel Atom 330 motherboard with integrated Realtek Gigabit NIC (Intel Desktop Board D945GCLF2 Motherboard W/ Atom 330 1.6 GHz Dual Core Processor - Mini-ITX) I cannot achieve more than 15 MB/s, even doing a local transfer through eth0 to it's own IP. 100%   95MB  15.9MB/s   00:06 So this is not a cabling, switch or hardware issue, it seems like a driver or chipset limitation problem. Here is my........
  • OCFS2 crash


    When trying to even cd or ls the mounted OCFS2 partition it crashes.  I think this is a combination of VMWare Server's problem and the way I mounted and symlinked to it. More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things. Output of /var/log/messages for OCFS2   Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........
  • Samba SMB Error - Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD


    Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD That happens when trying to use smbclient to connect to a share.  The weird thing is that I can authnenticate just fine from Windows XP. It is partially my mistake, I forgot this share does have a password.  I've tried authenticating with the correct user and also with "Guest" because this works in Windows.  In Linux I ........
  • Viewing and Connecting to an SMB Samba Share on Windows/Linux/Unix


    This will give you the basic info needed to browse and connect to Samba shares from the command line.  From the GUI of Gnome or KDE etc, it is pretty standard and straight forward.  However, I've found very little guides on how to do it from the command line and if you're like me, a nerd who prefers command line for its simplicity and for remote use, this is the way to go. First get a list of all the Samba/SMB shares on the target. smbclient -L hostname........
  • Latest Articles

  • syntax error, unexpected T_SL in PHP Solution
  • grep regular expression match number range between specific numbers
  • bash how to print out lines of text within a range from the first occurrence
  • bash script how to to check LAN computers for open ports
  • MySQL Using mytop Debug Source of High IO and Slow Performance
  • How To Mathematically Convert and Calculate Binary Value To Decimal Value
  • systemd management using systemctl and journalctl to check systemd logs
  • css how to format code in the code tag
  • css br with extra blank line
  • What is /dev/pts and why do we need it in Linux?
  • Linux What is umask (user mask) for file and directory creation permissions and how to calculate umask and change the defaults
  • Linux Permissions and Groups Real Usecase for Group Access
  • Centos 7 python34 how to install the gi library
  • Centos 7 - Convert Minimal to Graphical GUI GNOME or KDE Desktop
  • AMD Set Fan Speed and Other Powerplay Memory/CPU Timings with a Linux script
  • Ethereum Mining Claymore Nanopool Error
  • genisoimage errors with long filenames and deep directory structures
  • Linux Kernel USB Export Errors
  • How to download gajim 0.16.9 XMPP/Jabber client so you can use OMEMO encryption
  • HP DL385 G7 Linux BIOS Update Flash