• Ubuntu Linux Mint Debian Redhat Youtube Cannot Play HD or 4K videos, dropped frames or high CPU usage with Nvidia or AMD Driver


    In a lot of distros, vdpau which accelerates video through the GPUis often not installed even in recent distros. This will result in Firefox with Youtube dropping frames when you check the "Stats for Nerds" and to the eye as jerky or slower video playback due to the dropped frames. Some sites will say that because you are watching VP09 that there is no GPU support, but with vdpau installed and enabled, many GPUs will still be able to use hardware decoding for 4K........

  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730


    This is certainly a poor design, as you can read many seasoned admins who have updated their iDRAC only to have it killed. One possible cause is not by doing all the incremental updates, doing updates from an old iDRAC to one many revisions newer is a sure way to kill things, but even then there is no guarantee based on the amount of failures. List of threads of people's dead iDRAC's:........

  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile


    This guide assumes you have a working Postfix server and want it to sign with DKIM. There are a few things we have to understand to make all of this work though, which require you to be familiar with DNS as well. 1.) Install OpenDKIM apt install opendkim systemctl enable opendkim 2.) Edit /etc/opendkim.conf Syslog yes SyslogSuccess yes Mode&nbs........

  • Save money on bandwidth by disabling reflective rpc queries in Linux CentOS RHEL Ubuntu Debian


    Even today we see a lot of servers that have different services and ports open for rpc and this creates not only potential inward vulnerabilities but perhaps more common, the abuse of your network resources in reflective rpc queries. To stop this problem, you should disable and remove all services relating to rpc or at least block all relevant ports for the service. Surprisingly, there are still some providers and OS installs in Linux that install these services and leave them........

  • Install Grafana on Linux Debian Ubuntu Tutorial Guide


    First we need a few extra packages: apt update apt install -y adduser libfontconfig1 musl sudo wget https://dl.grafana.com/enterprise/release/grafana-enterprise_10.3.1_amd64.deb Install / Enable Grafana dpkg -i grafana-enterprise_10.3.1_amd64.deb dpkg -i grafana-enterprise_10.3.1_amd64.deb (Reading database ... 44309 files and directories currently installed.) Preparin........

  • System has not been booted with systemd as init system (PID 1). Can't operate. Failed to talk to init daemon. Ubuntu Debian Linux Solution Cannot reboot


    You are probably using some custom image or maybe this is some sort of container that didn't boot with systemd. The solution is to use "reboot -f" reboot -f This will force the system/OS/VM/container to reboot.........

  • Docker cannot work on other overlayfs filesystems such as ecryptfs won't start overlayfs: filesystem on '/home/docker/overlay2/check-overlayfs-support130645871/upper' not supported as upperdir


    This does not seem to be officially documented but makes sense that an overlay on an overlay does not work and is considered an unsupported filesystem as is even NTFS . Some admins/organizations try to use ecyptfs as a simple solution to encrypt the contents of Docker. Instead, you could probably........

  • Linux How To Upgrade To The Latest Kernel Debian Mint Ubuntu


    How to check what kernel version you have/currently running? uname -rm 5.4.0-91-generic x86_64 The above shows us that we are running 5.4.0-91-generic on the x86_64 architecture. The safest way is to stick with the same flavor eg if you're on generic, and say on kernel 5.4.0 then it makes sense to follow what is below. However, if you are migrating or dual booting between newer hardware (eg. you got a........

  • Firefox how to restore and backup saved passwords and history which files/location


    The passwords are stored in the following locations on Unix/Linux: The directory is usually inside your home like this: ~/.mozilla/firefox logins.json contains the locations, username and password key*.db (usually then name could be key3.db or key4.db) Without the key file you will not see any passwords in Firefox as it is required to in order to decrypt the contents of logins.json........

  • How to upgrade to the latest Python version on Linux Ubuntu Debian Mint 3.11


    A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version. Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended): Step 1 - Add the repo apt-add-repository ppa:deadsnakes/ppa If you get an error about requests then install it:........

  • talib/_ta_lib.c:747:10: fatal error: ta-lib/ta_defs.h: No such file or directory


    If you are installing ta-lib for Python and get this error then you can normally solve it by manually getting the ta-lib source files and compiling. tar -zxvf ta-lib-0.4.0-src.tar.gz cd ta-lib;./configure;make;make install Collecting ta-lib Downloading https://files.pythonhosted.org/packages/39/6f/6acaee2eac6afb2cc6a2adcb294080577f9983fbd2726395b9047c4e13ec/TA-Lib-0.4.26.tar.gz (272kB) &nbs........

  • Linux How to Check Which NIC is Onboard eth0 or eth1 Ubuntu Centos Debian Mint


    So say you happen to have 2 NICs of the exact same chipset, they will generally show up as the same name, with possibly a different revision in lspci. Normally this is not an issue if you have a server with 4 NICs, generally the eth0 to eth3 appears from left to the right (or right to left on some vendors) so it doesn't take much figuring out. Generally if you have different chipsets for different NICs, it should be easy to know which one is eth0 or the first NIC in the OS.........

  • Thunderbird Attachment Download Error Corrupt Wrong filesize of 29 or 27 bytes Solution


    This is an ongoing issue even with the latest Thunderbird 102.x where attachments downloaded via IMAP just won't save or will be corrupt which is a huge interruption to workflow or if you come back later to find out the file you thought you saved is invalid/corrupt and you have perhaps deleted the e-mail. How to solve the Thunderbird filesize attachment issue? 1. Click on "Settings". then go to "General". 2. Scroll to the bottom to find "Conf........

  • Generic IP Camera LAN Default IP Settings DVR


    If you are converting a generic wifi IP camera to ethernet, it may not be that simple as many are default hard coded to a static IP of 192.168.1.168 and login info admin/admin. From there you can login to the camera and assign it to DHCP by going to http://192.168.1.168 For security these cameras +DVR should be on a separate untagged VLAN or if possible a physically isolated non-internet connected switch/network. The reference below is applicable to many of the r........

  • docker / kubernetes breaks Proxmox QEMU KVM Bridge VMs


    Docker adds iptables rules that break a lot of things including MASQUERADE or anything that needs the FORWARD table. If NAT is not working after Docker installation, it is probably because it set the iptables FORWARD policy to DROP. This may also make you think that your br0 or bridge is not working, but it's likely just due to what we'll mention later on below, that, Docker probably set your FORWARD chain to default DROP all packets, so nothing on your bridge ever makes it out........

  • Kazam video blank/high size and not working when recording solution


    By default it uses raw .avi which takes a lot of space and will not play on a lot of systems. It's best to change the codec to something like MP4. Step 1.) File -> Preferences -> Screencast in Kazam Step 2. ) Change Record With: to H264 (MP4) After that you'll........

  • ssh Too many authentication failures not prompting for password


    If you get this error when trying to SSHto a device or machine and you never even got a password prompt: Too many authentication failures This means that either the remote side is configured for key auth only, OR your client side may be attempting to auth using mulitple keys, and that exceeds the amount of attempted authorizations on the remote ssh server. If the issue is trying to auth too many times which ssh defaults to sending the keys to, you ca........

  • LXC Containers LXD How to Install and Configure Tutorial Ubuntu Debian Mint


    If you are using mint, delete the preference that stops snap from installing (as it is required for lxc) sudo rm /etc/apt/preferences.d/nosnap.pref 1. Install lxd: sudo apt install lxd Issues install lxd or errors? Click here Debian at this time does not have lxd so you'll need to use snap: sudo apt in........

  • Ubuntu Mint audio output not working pulseaudio "pulseaudio[13710]: [pulseaudio] sink-input.c: Failed to create sink input: too many inputs per sink."


    If your audio is not working and you got this in your syslog: pulseaudio[13710]: [pulseaudio] sink-input.c: Failed to create sink input: too many inputs per sink. The issue is generally caused by too many audio inputs, or in other words you have too many applications that are hooked into pulseaudio. An easy and notorious offender is by having dozens of Firefox browser tabs open. Solution: Close all of your Firefox and the problem will........

  • (firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory) Solution


    (firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory) ExceptionHandler::GenerateDump cloned child 9743 ExceptionHandler::WaitForContinueSignal waiting for continue signal... ExceptionHandler::SendContinueSignalToChild sent continue signal to child [Parent 9562, Gecko_IOThread] WARNING: pipe error (40): Connection reset by peer: file /build/firefox-EymEXX/fire........

  • Docker Tutorial HowTo Install Docker, Use and Create Docker Container Images Clustering Swarm Mode Monitoring Service Hosting Provider


    The Best Docker Tutorial for Beginners We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........

  • HongKong VPS Server, Cloud, Dedicated Server, Co-Location, Datacenter The Best Guide on Hong Kong, China Internet IT/Computing


    In our 2024 VPS Server/Cloud Buyer's Guide, we place the location of your VPS/hosting/server as one of the priorities that is often overlooked. 2024 Update - Datacent........

  • Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source. E: Package 'wget' has no installation candidate. Solution


    These types of errors are normally caused by misconfiguration of your /etc/apt/sources.list. In this example on Debian 10, if you didn't complete the install correctly, you will have no repos enabled and only rely on CDROM. "Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source. E: Package 'wget' ha........

  • Wazuh / OSSEC Install and Configuration Howto Tutorial Guide for Monitoring Agents SIEM


    How To Install Wazuh Server / Quickest Installation Wazuh (forked from the well known OSSEC project) is a full SIEM (Security Information Event Management) that works extremely well with the platforms it natively supports as an "Agent", which allows you to do scans of everything such as all processes running, CVE vulnerability check, incident reporting etc... Prerequisites: A lot of issues with Wazuh seem to be caused by i........

  • Ansible Tutorial - Playbook How To Install From Scratch and Deploy LAMP + Wordpress on Remote Server


    1. Let's work from an environment where we can install Ansible on. If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way: sudo apt install gpg sudo add-apt-repository ppa:ansible/ansible sudo apt update........

  • QEMU/KVM How to Hot-add A Virtual Disk .raw/.qcow2 via QEMU Monitor Commands


    For a lot of reasons, it may be convenient to detach or attach live disks to a running VM without having to reboot it. Sure, you can use some network based storage, but when performance counts, attaching a new virtual disk will usually give you better throughput and lower latency in a quick testing situation. This doesn't work, why not? drive_add 0 if=virtio,file=/tmp/vm.qcow2,if=virtio,format=qcow2,id=rtt Can't hot-ad........

  • Virtualbox VBOX Howto Port Forward To Guests


    NAT Network, the VMs can communicate but your host cannot access them by default. NAT VMs have internet but cannot communicate with each other. Bridged is simple and allows full LAN access as if you had a physical machine plugged in but is often bad for testing, work or corporate environments and is not very portable when it comes to moving your VMs to other locations and networks. Here is how you can use NAT Ne........

  • Linux Mint 20 cannot install snapd missing solution


    The Linux Mint team has disabled it by setting an apt preference, you can edit or just remove the file: sudo apt install snapd Reading package lists... Done Building dependency tree Reading state information... Done Package snapd is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source........

  • CentOS 7 8 yum error Trying other mirror. To address this issue please refer to the below wiki article


    The below appears at first to be a bad mirror DNS error, but if you've ruled that out you just need to clear your broken yum cache and things will be good. yum update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.01link.hk * extras: centos.01link.hk * updates: centos.01link.hk http://mirror.worria.com/centos/7.8.2003/os/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not........

  • How To Replace Audio Track of Video using ffmpeg


    A very common use case is that you don't want to waste time using a video editor that requires you to open it up and manually import the video clip and audio clip, then manually delete the old audio track and import the video and new audio. That's too much work and time since we don't want to go through the hassle. ffmpeg is our solution, all we have to do is specify 3 variables and we're done! -i Windows2019-Server-Noaudio.mp4 is our in........

  • apcupsd how to setup and monitor APC UPS units


    It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc.. wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866 tar -zxvf apcupsd-3.14.14.tar.gz cd apcupsd-3.14.14 [root@somebox apcupsd-3.14.14]# ./conf........

  • Nvidia Ubuntu Linux Screentearing Video with solution driver


    This seems to happen on most if not all Nvidia cards but the good news is that if you are using any of the Linux drivers and have the nvidia-settings tool installed it is just a simple command. Solution: nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }" Enter the above command in your terminal and the screentearing will be fixed which is like enabling Tear Free on AMD cards.&........

  • ?? Question Marks for time, permissions and size of a file?


    -?????????? ? ? ? ? ? shadow ----------. 1 root root 748 Jul 10 04:35 shadow- cat: shadow: Input/output error If you see this you are probably in big trouble, it could be a physical error or if it's a VM image that it is corrupted due to a physical error on the underlying disk/array/NAS or it could a........

  • CentOS 6 impossible to compile a newer libguestfs


    yum -y install gcc make gperf genisoimage flex bison ncurses ncurses-devel pcre-devel augeas-devel augeas readline-devel checking for cpio... cpio checking for gperf... no configure: error: gperf must be installed configure: error: Package requirements (augeas >= 1.2.0) were not met: Requested 'augeas >= 1.2.0' but version of augeas is 1.0.0 yum remove augeas augeas-libs augeas-devel wget http://downl........

  • How To Get Started on Ubuntu with gpt-2 OpenAI Text Prediction


    apt install software-properties-common add-apt-repository ppa:deadsnakes/ppa apt update apt install python3-pip apt install python3.7 curl gnupg python3.7-dev git ln -s /usr/bin/python3.7 /usr/bin/python3 pip3 install numpy keras_preprocessing curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add - echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........

  • Asterisk Does Not Retry When Authentication Fails


    When authentication times out that is one thing, but when it just fails like below Asterisk by default will not re-register until you the admin reload the sip or asterisk server: voipserver*CLI> sip show registry Host dnsmgr Username Refresh State&........

  • Linux Debian Ubuntu How To Install PEPPER Faster and Latest Adobe Flash Player in Firefox


    Just run this apt install command sudo apt install pepperflashplugin-nonfree browser-plugin-freshplayer-pepperflash After this restart your browser and check Adobe's site to verify if your Pepper flash is working and showing at least version 32. https://helpx.adobe.com/flash-player.html As you'll see below it will download the latest version which is currently 32 and this was not possible with the old/crappy deprecated adobe-flash plu........

  • Ubuntu Debian Linux Cannot Install Wine Solution - wine1.6 : Depends: wine1.6-i386 (= 1:1.6.2-0ubuntu14.2) but it is not installable wine1.4 : Depends: wine1.6 but it is not going to be installed


    If you've ever gotten errors like this the solution is simple, you need i386 enabled on your 64-bit install because wine depends on some 32-bit x86 libraries: dpkg --add-architecture i386 apt update apt install wine After that it will install just fine. apt install wine Reading package lists... Done Building dependency tree Reading state information... Done........

  • How To Install python 3.4 3.5 and up on Linux with wine - Working Solution


    This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu! Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........

  • httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load modules/libphp5.so into server: /lib64/libresolv.so.2: symbol __h_errno, version GLIBC_PRIVATE not defined in file libc.s


    httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load modules/libphp5.so into server: /lib64/libresolv.so.2: symbol __h_errno, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference This is usually caused by a mismatch in OpenSSLversion. Interestingly enough a lot of times if it has happened during an update of your system, or after, usually just restarting httpd........

  • CentOS 8 how to convert to a bootable mdadm RAID software array


    The cool thing here is that we only need 1 drive to make a RAID 10 or RAID 1 array, we just tell the Linux mdadm utility that the other drive is "missing" and we can then add our original drive to the array after booting into our new RAID array. Step#1 Install tools we need yum -y install mdadm rsync Step #2 Create your partitions on the drive that will be our RAID array Here I assume it is /dev........

  • selenium.common.exceptions.WebDriverException: Message: Can not connect to the Service geckodriver


    A lot of times this is actually caused by simply not having Firefox installed at all. selenium.common.exceptions.WebDriverException: Message: Can not connect to the Service geckodriver https://github.com/mozilla/geckodriver/issues/270........

  • python ModuleNotFoundError: No module named 'bs4' even though you have the module


    In this case I am executing using "python3" but what you find in cases like this can be surprising. The most common issues are that someone has a module for python 2 "pip" and doesn't realize they need "pip3" to install it for python3, but this is not one of those cases. ModuleNotFoundError: No module named 'bs4' OKmaybe we didn't install it for python3? [........

  • chown how to change ownership on a symlink


    If you just do a normal chown user.user somedir it won't work. You will see the ownership is still the previous owner. How To Change Ownership Of Symlink: The simplest part is just adding the -h which means no dereference so it applies the ownership on the symlink and does not try (and fail) to change ownership of the dereferenced symlink destination. chown -h user.user somedir........

  • Linux 3D Performance benchmarks with glxgears 59-60fps solution


    You need to disable vsync like this when running glxgears: vblank_mode=0 glxgears For Nvidia drivers do this: __GL_SYNC_TO_VBLANK=0 glxgears Notice the higher than 59-60 fps results with vblank_mode=0: ATTENTION: default value of option vblank_mode overridden by environment. 7919 frames in 5.0 seconds = 1583.704 FPS 8187 frames in 5.0 seconds = 1637.266 FPS........

  • How To Install Asterisk 16 17 on Debian Ubuntu Linux


    Downloading and compiling from source to get the latest version of Asterisk is really simple with this guide. apt install gcc make g++ libedit-dev uuid-dev libjansson-dev apt install libxml2-dev sqlite3 libsqlite3-dev wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-16-current.tar.gz tar -zxvf asterisk-16-current.tar.gz cd asterisk-16.6.2/ ./configure If you get this error change y........

  • Cisco Unified Communications Manager Express Cheatsheet CUCME CME Tutorial Guide


    Video Links: How To Setup 2 Phones on a Single CME Router and get the GUI going. How to use Dialpeers with CME with two routers How to implement call restrictions using COR / Class of Restriction Getting started, let's enable ephones and DNs we can add a phone with........

  • Firefox Cannot Hit Enter Key In Address Bar and Location History Not Working


    Opening Firefox from the CLI reveals the following as the cause of the error: Query failed: Error: Error(s) encountered during statement execution: no such table: moz_favicons The symptoms of this issue are that in the address bar you cannot hit enter to browse to a site/url/address and your history cannot be accessed, nor does your history show up in the address bar when typing previously used addresses. This usually happens because you've........

  • Cisco Unified Communications Manager / CUCM IP 8.6,10,12 Install Error Solution


    Install Errors on Version 12: This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5 on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error. *Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install. What really causes this even though you successfully install........

  • bind / named how to make a wildcard record and retain defined A records


    It is almost as intuitive as we would like it is just a *. So literally: *INA 127.0.0.1 Complete working bind zonefile below: $TTL 86400 @ IN SOA ns.rtt.ca. ns2.rtt.ca. ( 1247605715; Serial &n........

  • Cisco Unified Communications Manager 12 Install Errors on Proxmox/KVM


    The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs. qemu-kvm command: /usr/libexec/qemu-kvm -version QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard ........

  • Local Vs Universally Administered MAC Address NIC Refuses to come up


    2,6,A or E is what the second digit of your MAC address must be otherwise a lot of OS's will not work. They will say the NIC is down/not connected even though it is. This is because if the second digit is not set properly it will not view as a valid MAC or device uplink. This is especially an issue with VMs whether in QEMU etc.. if you are making your own MAC. MAC address is invalid c4:d1:aa:e5:10:05 To fix it just........

  • WebRTC Vulnerability Shows Local IP Address Even When Using a Proxy or VPN Firefox Fix And Disable Solution


    If you visit a site that exploits the WebRTC vulnerability including whatismyipaddress.com it may show "Local IP Address" which would be the real IP of your machine. The vulnerability works on Windows and Linux machines (contrary to false information on the web which claims it only affects Windows). The above works and happens even if you are using a proxy or VPNaccount like ProVPNAccounts.com It is easy........

  • Skype For Business 2015 and 2019 Guide, Reference, Howto and Troubleshooting Solutions


    https://docs.microsoft.com/en-us/powershell/module/skype/?view=skype-ps Troubleshooting Client Connectivity Issues The first step is to enable full logging in the Skype Client itself and then check the log on the client side. In Windows this normally means going to the Skype client "settings" and then "Enable Full Logging". Aft........

  • Cisco CUCM Unified Communication Manager Howto Guide and Tutorials


    Install Issues: How to Make CUCM iso /modify to work on non-VMWare machines like QEMU/Xen/OpenStack If you get kernel panic errors in VBOX usually disabling Nested Paging will fix the issue (thanks to Mark). ks_pre.sh error is caused by having the wrong VDX pattern (change it do sd per guide link above) and/or the wrong VMSpecs (Cisco req........

  • Linux Mint 18.2 Create Config File To Start Application Upon Login


    This is not about systemd/systemctl and not about "onboot" so there's no rc.local trick here but it's the GUI/Gnome etc when a user logs in that a command is launched. Put this in your home dir The .config/autostart directory is where Linux Mint/Ubuntu checks for autostart application config files mkdir -p ~/.config/autostart Create a new entry/file that starts an application........

  • iptables linux firewall recommended rules for public computing


    Whether you are at work, at the coffee shop or on the public internet here are some basic but effective rules for iptables that lock things down (eg. no one can SMB or SSH to you or really anything): # Generated by iptables-save v1.4.21 on Fri Dec 14 14:00:08 2018 *nat :PREROUTING ACCEPT [160:19844] :INPUT ACCEPT [4:357] :OUTPUT ACCEPT [2955:182236] :POSTROUTING ACCEPT [2955:182236] COMMIT # Completed on Fri Dec 14........

  • bind named error solutions named[2169]: error (no valid DS) resolving / error (broken trust chain) resolving / : error (no valid RRSIG) resolving 'com/DS/IN':


    Below are the common errors you'll get with named AKA bind if your time is incorrect. The simplest solution is to install and run ntpd to correct your system's time (install ntpd if it is not installed) systemctl start ntpd systemctl enable ntpd Dec 20 13:36:16 hostingbox named[2169]: error (no valid DS) resolving 'develop.waxrain.com/A/IN': 14.215.150.17#53........

  • iptables how to log ALL dropped incoming packets


    A lot of people just have a -j DROP to drop all unwanted traffic or traffic not explicitly allowed but there is a better solution if you want real and proper logging: Here is another example of more advanced iptables rules. Take an example iptables rules file -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p icmp -j ACCEPT........

  • Linux partprobe/partx cannot access last and 4th partition


    On a test machine Iwas never able to access to a newly created 4th partiton. As we can see there are dev devices for everything but the 4th partition. The normal "partprobe" or "kpartx" or kernel being told to rescan the block device didn't help (only a reboot did). fdisk -l /dev/sda Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units........

  • iSCSI on Centos 7 Configuration and Setup Guide for Initiator and Target


    initiator = client target = server These are the first concepts you should understand which is that in iscsi essentially the "initiator" is the client and the "target" is the server. iSCSI is derived from the old fashioned SCSI that us oldtimers grew to love. The "i" stands for Internet and the SCSI stands for "Small Computers Systems Interface" (SCSI). iSCSI Target (Server)Setup targetcli is the pac........

  • Python and BeautifulSoup4's BS4's Decompose Method To Remove Unwanted Inner Tags


    < a href="/Products/MX72244"> < span class="c-shca-icon-item__body-name-brand"> ADATA < / span> &nbs........

  • Centos 7 PHP MySQL Not Working Solution


    PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/pdo_mysql.so' - /usr/lib64/php/modules/pdo_mysql.so: symbol mysql_options, version libmysqlclient_18 not defined in file libmysqlclient.so.18 with link time reference in Unknown on line 0 #not sure what is wrong with php-mysql but I removed it and installed mysqlnd yum -y remove php-mysql yum -y install php-mysqlnd........

  • How Does Cisco CUCM (Cisco Unified Communication Manager) Work?


    Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments. Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........

  • What DNS Options Does Active Directory Offer in Windows Server 2008,2012,2016 ?


    What Is Active Directory? Active Directory is essentially an enhanced, centralized database with a set of objects that make user management, authorization, and data management simpler. Active Directory is synonymous with "Domain Controllers" where a single "domain" often consists of multiple sites and members of the domain. Multiple domains can also be joined to belong to a tree ( a collection of domains). And the highest layer is the forest whi........

  • Centos 7 - Convert Minimal to Graphical GUI GNOME or KDE Desktop


    Did you just install the minimal version by accident or want to install the GUI? No need to reinstall just tell yum to do the work for you! You could actually have both installed and choose one as your preference on demand (although many people prefer GNOME's simplicity). Step 1.) Install Gnome and/or KDE. To install the GNOME Desktop on Centos 7: yum -y groups install "GNOME Desktop" To........

  • Firefox An error occurred during a connection to some-ip-or-domain. SSL peer reports incorrect Message Authentication Code. Error code: SSL_ERROR_BAD_MAC_ALERT Solution


    An error occurred during a connection to some-ip-or-domain. SSL peer reports incorrect Message Authentication Code. Error code: SSL_ERROR_BAD_MAC_ALERT The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the website owners to inform them of this problem. **Solution** Go to about:config........

  • Cannot install moodle


    After starting the install it stalls here: admin/index.php?cache=0&agreelicense=1&confirmrelease=1&lang=en If you manually refresh you get a Plugins check screen: Installation System Moodle second step fails just blank screen: https://domain.la/user/editadvanced.php?id=2 Solution: give up and choose something else it shouldn't be thi........

  • moodle install error Error reading from database


    Error reading from database More information about this error It is usually not possible to recover from errors triggered during installation, you may need to create a new database or use a different database prefix if you want to retry the installation. Solution: This happened when I was running MySQL 5.1. Assuming your database details are right and the DB is up then make sure you are usin........

  • PHP Displaying Blank Page on Apache


    Almost always the reason will be that the php.so file is missing but also that php.conf is misconfigured. In the problem machine it is actually PHP7 installed so if you reference PHP5 of course things wil be broken! Take for example here: cat /etc/httpd/conf.d/php.conf # # PHP is an HTML-embedded scripting language which attempts to make it # easy for developers to write dynamica........

  • VMWare Vsphere VCSA Graphical Install Creates json


    yes it does create its own json ============================================ cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json 2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1 --> ........

  • Debian Mint Ubuntu compiling xmr-stak


    sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3 sudo apt-get install libcurl4-gnutls-dev git clone https://github.com/wolf9466/cpuminer-multi sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev git clone https://github.com/fireice-uk/xmr-stak-cpu.git make install cd bin chmod +x xmr-stak-cpu ./xmr-stak -O xmr........

  • Centos 7 - How To Install NFS and Mount Remotely


    Server Side Config 1.) First install nfs-utils yum -y install nfs-utils 2.) Configure nfs share Create a directory for your NFS share mkdir /datastore Create your NFS share in /etc/exports echo "/datastore 10.220.101.0/24(rw,sync,no_root_squash)" >> /etc/exports systemctl restart nfs........

  • VSphere InternalServerError - Error When Adding Permissions


    InternalServerError (com.vmware.vapi.std.errors.internal_server_error) => { messages = [LocalizableMessage (com.vmware.vapi.std.localizable_message) => { id = vapi.bindings.method.impl.unexpected, defaultMessage = Provider method implementation threw unexpected exception: com.vmware.vapi.std.errors.InternalServerError, args = [com.vmware.vapi.std.errors.InternalServerError] }], data = } I was getting the........

  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........

  • OpenVPN auth-user-pass-verify ENV script error


    Starting with newer versions of OpenVPN Ibelieve 2.2+ you need to have "script-security 3" set or you can't execute a third party script. Prior to that you could also use the auth-user-pass-verify like this: auth-user-pass-verify ./validate.pl "$username $password $ip" via-env Options error: the --auth-user-pass-verify directive should have at most 2 parameters. To pass a list of arguments as one of the paramete........

  • named [FAILED] - zone 1.168.192.in-addr.arpa/IN: not loaded due to errors. - bind error solution


    Centos when copying old files and restarting it seems load everything fine and then says [FAILED] with no log or other message. service restart named named [FAILED] Check more thoroughly you may have missed the error if you have lots of zones! service named restart|grep error zone 1.168.192.in-addr.arpa/IN: not loaded due to errors. zone 2.168.192.in-addr.arpa/IN: no........

  • Mozilla Firefox Address Bar History Not Working places.sqlite corruption solution database repair


    Here is the only solution Ifound that works in Firefox: *Note you could basically just copy all of the commands in bold (the rest just shows the output) Install sqlite3 sqlite3 places.sqlite sqlite> .clone places.sqlite-fixed moz_places... done moz_historyvisits... done moz_inputhistory..........

  • How To Set or Change Useragent in Firefox and Seamonkey


    In your browser go to "about:config" Right click and choose "New" ->"String" The name should be: general.useragent.override String Value: Mozilla/5.0 (Linux; U; Android 2.2.1; en-ca; LG-P505R Build/FRG83) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1 You don't even have to restart to make this work.........

  • SMF Forums / Simple Machines Forums Not Displaying Images Theme or Styles Properly using 127.0.0.1


    This is one thing that has me wondering about SMF. It is apparently a known issue but in the latest version and new install nothing looked right because it was using http://127.0.0.1 to find everything! How on earth would it ever do this or think it is normal? Excerpt of crazy html code it produces that causes the issue: ........

  • "Object of class WP_Term could not be converted to string"


    Normally when I've seen this it's when you are using a variable like a normal string when in fact it's actually an array such as this example: [Tue Mar 13 04:22:35 2018] [error] PHP Catchable fatal error: Object of class WP_Term could not be converted to string in /vhost/httpdocs/wp-content/plugins/wp-instagram-post/classes/class-woo-igp.php on line 578 &nbs........

  • Installing SSL Certificate with Chain Intermediary CA File


    Some of the cheaper or newer SSL suppliers will require this to work properly (otherwise you may be prompted that the cert is invalid when it's not the case but it will certainly scare off your users!). In the Apache vhost conf for the domain here is what you add: SSLCACertificateFile /path/to/your/cafile.pem Here is a full example of an SSL Vhost config in Apache using a CA Certificate file ........

  • Centos How To Update to Glibc 2.14 Plus


    Centos 6 requires GLIBC 2.12 however a lot of new programs you would want to compile may need a newer glibc. You can't remove the old glibc since the whole OS is based on it but you can install the updated glibc alongside it and do an export pointing to your updated GLIBC. mkdir ~/glibc_install; cd ~/glibc_install wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz........

  • Install Windows From a Linux TFTP Server instead of using WDS Solution


    yum -y install samba vi /etc/samba/smb.conf https://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-6.03.zip mkdir syslinux;cd syslinux;unzip syslinux-6.03.zip mkdir -p /tftpboot/libs/ cp bios/com32/modules/linux.c32 /tftpboot/libs/ cp bios/com32/libutil/libutil.c32 /tftpboot/libs/ cp bios/com32/lib/libcom32.c32 /tftpboot/libs/ #add lib path echo "PATH libs" >> /tftpboot/pxeli........

  • Linux how to view video card make and exact model


    Normally lspci will show you just like this and would suggest they are exactly the same card: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) 1c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) lspci -vnn is the answer As we can see one is a Gigabyte and the other is an MSI card. Wha........

  • How to disable Google Fonts in Wordpress


    edit theme css: Click "Appearance -> Editor -> Stylesheet" http://yourblog.com/wp-admin/theme-editor.php?file=style.css&theme=twentysixteen textarea { color: #1a1a1a; /*font-family: Merriweather, Georgia, serif;*/ font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif........

  • M2Crypto.SSL.Checker.WrongHost: Peer certificate subjectAltName does not match host, expected fedora-archive.ip-connect.vn.ua, got DNS:mirror.ip-connect.vn.ua


    You are using Centos 5 which is deprecated so nothing in yum will work until you follow this post to use the vault: http://realtechtalk.com/Centos_59_Working_Vault_Repo_file-1921-articles yum update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * epel: fedora-archive.ip-connect.vn.ua Traceback........

  • Disable SSH Password Authentication to Increase Security and Harden SSH Linux Unix Server Ubuntu Mint Centos Debian


    Just a note before you do this you should have a sure, guaranteed way into the system such as local, KVMor preferably publickey making bruteforce SSH absolutely impossible since there is no password to bruteforce and even if someone knew the password they wouldn't be able to login except from the local console (presumably you should make sure no one unauthorized has physical access). 1. Edit /etc/ssh/sshd_config Find the section like this:........

  • ffmpeg trouble concatenating similar but different files


    When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right. Solution for me: My example uses 3 videos in total so "n=3" and a=1 to include audio. ffmpeg -threads 12 -i file1.mp4 -........

  • Linux Mint USB Kernel Tainted and Locked Port/Dev File


    Essentially a program I was running for mining did not terminate properly with Ctrl+C it is listed as defunct and cannot be killed, kernel is tainted and normal tricks to disable the port are impossible the dev and sys entries for the device cannot be browsed or interacted with in any form without a lockup of the request. The only solution is to reboot due to the kernel taint as far as I can find so far. [1130246.811056] INFO: task minerd:21861 blocked for more th........

  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd ffmpeg-3.3.2/ ./configure --disable-yasm install prefix /usr/local source path ........

  • Debian/Mint/Ubuntu Font Packs/Recommended To Install


    This will give you a lot more nice fonts to work with. Usually you must restart the program you are using to see the new fonts. ttf-mscorefonts-installer fonts-larabie-* ttf-xfree86-* ubuntustudio-fonts ttf-* fonts-*........

  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........

  • Openshot 2.2 is very unstable always crashing in Linux Mint 18.1!


    Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user: Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4 Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........

  • Apache SSL very slow response with Firefox Freezes/Loads Very slow when checking self-signed SSL certificate


    I was sure this was a Centos bug with OpenSSL, Apache, MySQL or even PHP. I tried everything but nothing helped. One clue is that if you check the Apache logs you will see nothing in the access logs until minutes later (this means Firefox has not even passed your request to the remote Apache/htttpd server). When even accepting the invalid certificate message that would show up minutes later when trying to "View the Certificate" Firefox would freeze. This bu........

  • phpBB3 slow and internal dummy connection


    Using Apache 2.2 and PHP5.6 PHPBB3 is very slow to respond. Actually for some reason it takes so long to even register a log entry in access_log as in several seconds or a few minutes later it shows up in Apache. All other vhosts and Apache access stops working and freezes until the request to access PHPBB3 slowly completes. It seems to randomly be slow if you stop using it whether for posting or reading the forums. I've migrated to different machines including........

  • check if Apache uses worker MPM or prefork MPM


    apachectl -l Compiled in modules: core.c prefork.c http_core.c mod_so.c It is "prefork.c" so in httpd.conf these settings are what you would use (if you use worker.c it won't have any impact): StartServers 2 MinSpareServers 5 MaxSpareServers&nb........

  • ubuntu Linux colour dropper picker


    gpick is a great and simple tool now that I now how to use it sudo apt-get install gpick The trick is to find "the swatch" I was in a rush and was frustrated that it wouldn't work how Iexpected and I had to memorize the hex code of the color my mouse was over. There is something it tells you to do which is "Click on the swatch area" (click onthe honeycomb graphic area that is the s........

  • Linux how to reformat html file code solution


    The solution is simply "tidy"/Tidy-HTML. It will take your poorly formatted HTML code (and I mean files that span just a few lines that are unreadable) and fix it up. Note the command below does everything in place. *Make sure you take a backup of all .html files* It also seems to break html5 code/templates so beware. tidy -im yourfile.html An automated way in bash:........

  • DRBD Split-brain solution


    Uh oh [17925926.174277] block drbd0: Handshake successful: Agreed network protocol version 96 [17925926.174325] block drbd0: conn( WFConnection -> WFReportParams ) [17925926.174342] block drbd0: Starting asender thread (from drbd0_receiver [1682]) [17925926.174432] block drbd0: data-integrity-alg: [17925926.174581] block drbd0: drbd_sync_handshake: [17925926.174586] block drbd0: self 2AAE66AF9252D6DB:2815BF........

  • ERROR 2013 (HY000): Lost connection to MySQL server during query


    The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files. UPDATE user SET password=password("newpass") WHERE user='root'; flush privileges; ERROR 2013 (HY000): Lost connection to MySQL server durin........

  • PYCURL ERROR 22 - The requested URL returned error: 404 Not Found Solution


    # yum -y install qemu-kvm Loaded plugins: fastestmirror Setting up Install Process Loading mirror speeds from cached hostfile * base: mirror.lzu.edu.cn * elrepo: ftp.utexas.edu * epel: ftp.jaist.ac.jp * extras: mirrors.aliyun.com * openvz-kernel-rhel6: mirror.fdcservers.net * openvz-utils: mirror.fdcservers.net * updates: mirrors.nwsuaf.edu.cn Resolving Dependencies........

  • OpenVZ Solution CPT ERR: c02fa000,73 :CPT: lock fd is closed incorrectly: 1 and vps-net_add ERROR: Unable to add route ip route add 192.168.5.2 dev venet0


    The only solution after trying many suggestions was to simply restart the "vz" service (definitely not preferable). Even doing an ifdown and ifup for venet0 did not help. ifup venet0 Bringing up interface venet0: Configuring interface venet0: net.ipv4.conf.venet0.send_redirects = 0 RTNETLINK answers: Network is down Some errors from log: CPT ERR: d2dc60........

  • DRBD Slow Performance - 99.99 % [jbd2/drbd0-8] highiowait solution


    Tired of checking iotop and seeing that your drbd partition is using 99.99% of io all the time and finding your drbd device performs slow in general? This is especially an issue in versions of DRBD in the 8.3 tree in particular one documented case is on "8.3.13" but it likely applies to other devices. The symptoms are that resyncing is fine and normal but any reasonable amount of activity is very slow and lagged and creates a high server load and con........

  • Linux How To Recover Partition Table from Kernel and Restore Centos/Debian etc..


    We've all done this at some point, you work on the wrong shell window and this was my first time making this mistake but I deleted a partition table in fdisk, recreated it and saved it with "wq" and even ran partprobe! If you haven't rebooted yet then you can still recover your partition table, otherwise you're in big trouble. Fortunately since it was a live system and in use the kernel still had to use the old table like below:........

  • The connection was reset The connection to the server was reset while the page was loading.


    In Firefox I cannot connect to any website, proxy is disabled and outside network access is confirmed, no system or manual proxy was set on this Linux Mint/Ubuntu system. Normally this can be caused by proxy or DNS problems and the weird thing is that traceroute and ping to other IPs worked fine but even connecting to sites by IP was not working. The connection was reset The connection to the server was reset while the page was loading.........

  • How to modify HTML/Themeforest Themes to work in any path statically using unix/linux's sed command


    For themes and custom CMS setups, the typical HTML theme is not ready to go at all but here are some common sed commands (search and replace that will get most of them working without breaking as you'd expect). The problem is that often the theme directory will be separate from the content and this will break the relative paths that these themes use. sed -i s/'href="'/'href="/themes/yourtheme/'/g index.html sed -i s/'src="'/'src="/themes/y........

  • Apache Vhost HowTo Serve Same Content using a different domain and IP


    There are a few ways of doing this and all basically involve using the reverse proxy or "ProxyPass" feature of Apache to accomplish it. 1.) Create a normal vhost and simply symlink the root directory of the site you want to mirror. Eg. originalsite.com and newsite.com /vhosts/originalsite.com/httpdocs You would symlink like this: ln -s /vhosts/originalsite.com/httpdocs vhosts/originalsite.com/........

  • Avocent 8020 KVM Java Icedtea Viewer


    This command in Debian/Ubuntu/Mint will get everything need installed for most Java based KVM viewers: sudo apt install icedtea-netx The following additional packages will be installed: ca-certificates-java icedtea-netx-common openjdk-8-jre openjdk-8-jre-headless It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post.........

  • Firefox errors Unable to generate public/private key pair. (Error code: sec_error_keygen_fail)


    Your firefox is out of date if you get errors like below: Secure Connection Failed ........

  • grub cannot install or boot from mdadm RAID 10 array


    root (hd2,1) Filesystem type unknown, partition type 0x83 grub> root (hd2,2) root (hd2,2) Filesystem type is ext2fs, partition type 0x83 grub> setup (hd2) setup (hd2) Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no #weird thing about grub is that the drive you enter is considered hd0 For example when booted fu........

  • Dell CS24 NV5/NV7 Gigabyte GA-3CESL-RH Motherboard ROM Chip info


    If you remove the white label on the chip (near the CMOS battery) you will find the following details about it: SST 49LF080A 33-4C-NHE It is the PLCC32 type and can be pried and removed safely (but be very careful) with an eye glass flat head screw driver. If you just have a bad flash you may be able to reprogram your original or just buy another one with the part# above and reprogram it. This is great news for people who have bricked th........

  • bash string substitution


    so in this case we have files named like this: track01.cdda.wav.mp3 track06.cdda.wav.mp3 track11.cdda.wav.mp3 track02.cdda.wav.mp3 track07.cdda.wav.mp3 track12.cdda.wav.mp3 track03.cdda.wav.mp3 track08.cdda.wav.mp3 track13.cdda.wav.mp3 track04.cdda.wav.mp3 track09.cdda.wav.mp3 track05.cdda.wav.mp3 track10.cdda.wav.mp3 but we want to rename them so they are like "05.........

  • Flash slowing down your Firefox browser? Install Flashblock plugin


    Install the "Flashblock" plugin because we all know most unwanted high CPU usage situations come from the browser usually because of a looping Flash ad taking up 100% CPU. The solution is to install the "Flashblock" plugin that doesn't allow any Flash to load and play unless you click on the placeholder.........

  • Vbox/Virtualbox devices grayed out for non-root user solution


    It is a permissions issue that is hard to fix. All but one USB device is greyed out. I am already a member of "vboxusers" I have already enabled and disabled USB support for the guest. I have already reinstalled the latest VBOx guest editions If running as root it all works fine Changing........

  • How to root and unlock S4 in Canada Bell/Rogers/Telus/Fido I337 4.4.2


    i337 Canada on Bell is hard to root or even install TWRP Installed TWRP from Odin and my computer gave me the bluescreen at the end but it seemed to be successful (after ODIN said reset). TWRP mode does not seem to enter, instead you get the Android recovery mode with Volume up + Home http://galaxys4root.com/galaxy-s4-root/how-to-root-att-or-verizon-galaxy-s4-on-android-4-4-2/ 1.)........

  • firefox android text size inconsistent large and small text size solution


    This is very annoying and also hard for web developers who want to see how things look on Android. You may be fooled into thinking you have an unclosed bracket or incompatible code but this is the "text inflation feature" which I feel should be disabled by default. It works so inconsitently that one block of text will appear small while the other will be huge and is quite annoying. The solution is simple Settings ->Display and &q........

  • PayPal subscriptions automatically cancelling after creation of profile


    There is a weird quirk with how this works, but there is a variable called "src" that defaults to 0 or disabled if not specified as 1. The default 0 means not to recur billing on a subscription.  It's too bad it's not more obvious anywhere nor is there an explanation or warning during payment or after to both the seller and buyer. Here's a proper subscription code example that does recur and does not cancel........

  • CPanel Link to all of the command line options


    CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting.  I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts. So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........

  • cp ignore symlink and copy the actual file


    This can be very tricky, say you are doing development on a file that is symlinked. Doing a "cp dev.file dev.file-bk" won't do what you expect, it just links back to the same file so you haven't copied or backed anything up. You need the "-H" switch to copy the actual file that is referenced by the symlink: cp -Hdev.file dev.file-bk........

  • drbd won't create device if previous partition is on it Command 'drbdmeta 0 v08 /dev/md160 internal create-md' terminated with exit code 40


    This is what fixed it: [root@box13 ~]# dd if=/dev/zero of=/dev/md160 bs=512 count=500 Basically you need to wipe out more than just the 512 byte partition table so 512 bytes * 500 is more than enough to make DRBD happy and think the partition is now empty. The reason this happens is because it gets confused when there is a previous partition with data on the device you are using. root@box13 ~]# d........

  • OpenVZ avoid vzctl 4.7 and ploop


    OpenVZ has made vzctl version 4.7 default to using ploop which is a big annoyance.  No one wants it otherwise we'd use Xen or KVM. Make sure to manually specify vzctl 4.6.1 or you will have issues with old scripts breaking since it defaults to using ploop (a single image like Xen/KVM). Here's a list to old versions of vzctl.........

  • Linux Ubuntu Debian Howto Manually Update/Install Thunderbird


    wget http://download-location sudo tar xjvf thunderbird-24.2.0.tar.bz2 -C /opt ln -s /opt/thunderbird/thunderbird /usr/bin/thunderbird [sudo] password for one: ln: creating symbolic link `/usr/bin/thunderbird': File exists sudo rm /usr/bin/thunderbird ln -s /opt/thunderbird/thunderbird /usr/bin/thunderbird The above is how Idid it, if you don't do it properly you'll find that you are still using the old version (........

  • Linux Ubuntu Debian Howto Manually Update/Install Firefox


    wget http://download-location mv /usr/bin/firefox /usr/bin/firefox-old sudo tar xjvf firefox-26.0.tar.bz2 -C /opt ln -s /opt/firefox/firefox /usr/bin/firefox The above is how Idid it, if you don't do it properly you'll find that you are still using the old version (so verify in About that it is the new version). I've verified the above method works perfectly, it's great if you're using an older version of Linux and need to update the most........

  • Asterisk iptables block bruteforce attacks howto with fail2ban


    yum -y install fail2ban vi /etc/fail2ban/jail.conf [asterisk-tcp] enabled = true filter = asterisk action = iptables-multiport[name=asterisk-tcp, port="5060,5061", protocol=tcp] sendmail-whois[name=Asterisk, dest=you@example.com, sender=fail2ban@example.com] logpath = /var/log/asterisk/messages maxret........

  • kvm centos cannot compile error


    ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install gcc make ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install compat-gcc-* ./configure Error: Could not find alsa Make sure to have the alsa libs and headers installed. yum -y install alsa-lib-devel ./configure........

  • KVM on Centos 6.3 cannot boot FreeBSD 9.2 AMD64


    On the same OS with the same kernels basically I cannot boot FreeBSD installer, I believe the issue is the host CPU. One host runs an Intel and works, while an Opteron 2373 does not work despite suggestions from this thread: http://149.20.54.209/showthread.php?t=36761 I've tried cpu options like "kvm64" "Opteron_G3" and none........

  • CPanel suhosin install failed


    /scripts/phpextensionmgr install PHPSuHosin Updating md5sum list Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)... Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........

  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........

  • iptables redirect ports to a different host and port + NAT Masquerade howto/solution


    This is important if you need public access to internal IPs such as at your office and don't want to use a VPN just to SSHinto different servers: Below forwards the port "10001" to the IP192.200.5.53 on port 22 (of course adjust it to your needs). iptables -t nat -A PREROUTING -p tcp --dport 10001 -j DNAT --to-destination 192.200.5.53:22 Remember to enable MASQUERADE on your NAT IPs or they won't be able to talk to the outside world (........

  • Directadmin Log File Locations


    This is a handy link and list of all the relevant Directadmin log files and related servers. http://help.directadmin.com/item.php?id=11 DirectAdmin: /var/log/directadmin/error.log /var/log/directadmin/errortaskq.log /var/log/directadmin/system.log /var/log/directadmin/security.log Apache:........

  • Bad Hard Drive Slows Down Computer


    Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........

  • OpenOffice Writer Replacing/Reformatting Dates in Tables - Howto Disable


    Tools -> Options -> OpenOffice Writer -> Table Uncheck "Number Recognition" This will permanently disable it but won't undo the damage it has already done. I spent a long-time fighting with this horrible feature which should be disabled by default.........

  • kvm cannot boot xen guest using lvm


    This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel. I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk. I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one). This is strange but it seems like this Xen PV guest has some sort of hidden or........

  • "Cannot load certificate file keys/server.crt: error:0906D06C:PEM" OpenVPN Solution


    Cannot load certificate file keys/server.crt: error:0906D06C:PEM The .crt is blank empty because when generating it I kept hitting enter for the defaults and this caused the crt not to be signed. Certificate is to be certified until Dec 18 00:35:49 2022 GMT (3650 days) Sign the certificate? [y/n]:y 1 out of 1 certificate requests certified, commit? [y/n]y So if you get messages like these, a........

  • Login and download all files script


    This is very handy if you're too busy and don't have time to download whatever files you need. The -D specifies the domains allowed, this is because I specified -H which means foreign hosts are allowed, if you don't restrict them you'll end up going to the whole internet via ads and other links just like a search Engine would follow. -l 0 specifies to go deep, to as many levels as possible/as exist. -e robots=off is important because robots.txt often says you can't vie........

  • Howto Copy/Backup/Restore All Firefox Settings/Preferences/Addons/Bookmarks to another computer/desktop


    I've used rsync again for this because I found it very simple, I've only excluded the Cache directory since it's not necessary and could be several GB in size. rsync -Phaz --exclude=Cache/* user@remotehost.com:/home/user/.mozilla/firefox/profile.default/* /home/user/.mozilla/firefox/ec1n9opl.default/ This is a great way once again to get going how you were on the old/remote computer fairly quickly. It even restores all of your history in........

  • Thunderbird How-To Copy/Backup/Restore Accounts and Settings to Another Computer


    The best way is to use rsync, I've set it up so it doesn't copy unnecessary files, or at least ones I'm sure aren't needed. Here is the rsync command Iused (adapt to your specific Thunderbird profile location): rsync -hazv user@remotehost.com:/home/user/.thunderbird/sbrer.default/* /home/user/.thunderbird/4nyb0.default/ --exclude=global* --exclude=Cache --exclude=ImapMail --exclude=Mail This is a great way to get your e-mail accounts going on a new c........

  • postfix how to send to multiple recipients default limit of 1000


    The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.5.3 Error: too many recipients. We set this in main.cf: smtpd_client_recipient_rate_limit=0 We didn't specify it before and the default is said to be 0/unlimited and it still didn't change anything.........

  • Centos how to upgrade from PHP 5.2 to 5.3 without downtime


    This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server). You may need to upgrade to PHP5.3 to run Joomla or many other reasons. Your host needs to use PHP 5.2.4 or higher to run this version of Jo........

  • xen how to resize an image properly


    The best way I could figure out is to use another guest of some sort to do this, while assigning the disk that needs to be resized to the same guest. So say we have /dev/xvda as the guests drive and we've booted it up. We also have /dev/xvdb (this is going to be the image/disk to be resized). In this case it's based on an ext3/4 image. Run e2fsck on it to ensure there are no filesystem errors. e2fsck /dev/xvdb........

  • Debian UUID not working


    Neither the blkid or the UUID internal to mdadm work to automount for some reason in Debian partprobe doesn't work but was a good suggestion from: http://pato.dudits.net/2008/11/03/special-device-uuidxxxxxxxxxxxxxxxx-does-not-exist-especially-with-lvm mount: special device /dev/disk/by-uuid/431b9b96-29e8f298-e89bd504-7065bddd does not exist mdadm -D /dev/md_d12 mdadm: metadata format 00.90 unknown, ignored. /dev/md_d12: &nb........

  • Firefox 11 solution for hidden tabs to the right


    After about 15 tabs I believe, they become hidden on the right side and are accessible only by furiously clicking the "right arrow" and even then it takes forever and honestly this hidden tab feature seems to slow down everything. If you enter "about:config" in your browser without the quotes just set this value to get rid of this annoying (one of many new) feature from Firefox (set it to false and restart your browser): services.sync.prefs.sync.brows........

  • Error code: sec_error_unknown_issuer Solution Valid SSL Certificate Throwing Error in Firefox


    So you've just purchased your SSL cert, renewed it and installed it or maybe you've had it installed and working fine all the time with all other browsers but you've upgraded to a recent version of Firefox and suddenly get the warning "Error code: sec_error_unknown_issuer" error. This is terrible since if you bought an SSL cert, you are most likely using it for trust purposes for your business and obviously that message will scare away most potential customers.........

  • Firefox 11 closes/quits without saving Open Tabs Prompt Solution/Fix


    Type "about:config" in your browser and then search for "Quit" Set these values to true browser.showQuitWarning browser.warnOnQuit........

  • Firefox 11 stop hiding http:// and https:// solution fix


    In Firefox type "about:config" in the address bar. Search for "browser.urlbar.trimURLs;false" and set it to true, then you'll have the http:// and https:// back. Firefox talks about the greater good but unless they don't care about security why would they hide if the url is secure or not?........

  • Asus VE247H 23.7" Inch LCD/LED Backlit Monitor Dead/Stuck Pixel Policy Complaint


    I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen. I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........

  • Firefox Error ./firefox-bin: error while loading shared libraries: libxul.so: cannot open shared object file: No such file or directory


    When double clicking nothing happens/it doesn't open and when executing as ./firefox-bin you get this error: ./firefox-bin: error while loading shared libraries: libxul.so: cannot open shared object file: No such file or directory All the .so files reside within the directory of Firefox that you extract from the binary .tar.gz from Mozilla, it's just that your computer doesn't know/recognize where to look for them. Solution:........

  • KVM QEMU and Xen how to mount disk images off-line and access data


    fdisk -lu VPS.img last_lba(): I don't know how to handle files with mode 81ed You must set cylinders. You can do this from the extra functions menu. Disk VPS.img: 0 MB, 0 bytes 255 heads, 63 sectors/track, 0 cylinders, total 0 sectors Units = sectors of 1 * 512 = 512 bytes Device Boot Start End ........

  • Ubuntu 10.04 Flash Videos have tearing/lines Solution


    This is what I call a ridiculous bug in compiz that causes it. The solution/To fix it just install "compizconfig-settings-manager" Open it up and Navigate to General Options -> Display Settings Set the "Refresh Rate" to the current refresh rate of your monitor. For ATI cards with slow window dragging/response supposedly disabling "Sync to VBlank" fixes that but otherwise leave it as is.........

  • How to recover from dead DRBD partition/hard drive in two simple commands


    This assumes that you've at least created the correct partition for your DRBD already. Notice that I am "diskless", that's because either your DRBD partition doesn't exist/has been renamed (eg. sdb becomes sda when sdb dies and you reboot) or because that drive is really actually dead/gone. *If you need to permanently change the partition/device for your resource be sure to edit /etc/drbd.conf on both hosts and reload the config. (replace r0 with........

  • Kernel/make compilation time and how to improve compile times/compile the Linux kernel faster without hardware upgrades


    I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though. There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........

  • Apache High CPU Usage Enable Mod_Status Guide Solution - Find Cause of High CPU Usage Script/Domain


    mod_status is a great way to track down the source of high CPU usage and to find what vhost/script is the cause of it. It gives you a live view of bandwith usage, CPU usage, and memory usage broken down by domain/vhost and script/URI. Enable mod_status vi /etc/httpd/conf/httpd.conf ExtendedStatus On SetHandler server-status Order Deny,Allow Deny from all All........

  • vnstat setup guide/tutorial


    yum -y install vnstat chown nobody.nobody -R /var/lib/vnstat/ #replace venet0 below with your desired interface sudo -u nobody vnstat -u -i venet0 #edit: vi /etc/sysconfig/vnstat #VNSTAT_OPTIONS="-i venet0" # only use the sed below if you are using venet0 instead of eth0 or replace accordingly sed -i 's/eth0/venet0/g' /etc/sysconfig/vnstat [root@monitor]# yum install vn........

  • Linux High IOWAIT updatedb can't be killed and crash with mdadm


    high IO wait 424 root 39 19 1900 848 552 D 0.0 0.0 0:00.91 updatedb root 424 0.0 0.0 1900 848 ? DN Mar11 0:00 /usr/bin/updatedb -f sysfs?rootfs?bdev?proc?cpuset?binfmt_misc?debugfs?sockfs?usbfs?pipefs?anon_inodefs?futexfs?tmpfs?inotifyfs?eventp........

  • Firefox Download Error - /tmp/J_5JHKXU.bin.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator.


    /tmp/J_5JHKXU.bin.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator. This is actually not a download problem related to the server/site you're using but actually some weird bug with Firefox. I know because no matter what site I tried to download from this error kept happening. Simpy restarting Firefox was enough to get things working again.........

  • Virpus Review/Scam/Complaint


    Virpus Review/Scam/Complaint Virpus is advertised on LEB (lowendbox.com). My initial payment was refunded after days of not receiving the VPS, but two subscrption payments went through and Ionly received notification after the second one. They ignored the requests in the ticket and by e-mail for a refund and even escalated the PayPal dispute that "we're assuming this is for a service that was provided" (when they obviously know otherwise by........

  • Apache MPM worker vs prefork


    find what MPM Apache is using, it will either be using "worker" or "prefork" apachectl -l Compiled in modules: core.c prefork.c http_core.c mod_so.c In my case it is "prefork" vi /etc/httpd/conf/httpd.conf Find the section that looks like this (by default one will normally exist for prefork and for worker, but in my case I only care a........

  • VPS Server Scam/Review/Complaint List


    These are the only two I've encountered but here is the low-end and note my story is not at all unique. In my case I was scammed out of money and did not receive any service at all from either company. Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support adm........

  • OpenOffice Calc SUM function not working Solution - Result is always 0/apostrophe appears in front of all numbers.


    I right clicked all applicable cells and chose "number" but that's enough. I notice when I click the cell there is an invisible ' in front of the number: '33.64 Calc imported my CSV and decided to add a ' in front of the numeric currency values!!!*Actually the problem occurs when you right click the cells and change the type from text to number, no matter what format you choose. If I change it to be currency i........

  • email server messsages rejected without reverse DNS DNS check failure Client host rejected: cannot find your reverse hostname Cannot resolve PTR record


    Basically you should always be 100% sure that whatever IPyour mail server sends out with has reverse DNS/PTR records. Remember that unless you own your IPs then you won't be able to set your own reverse DNS. Even if you were to create a reverse PTR record on your DNS servers it will be ignored. Reverse DNS is queried to pre-assigned DNS servers of your ISP, so therefore you'll need to contact your ISP/Colo/Hosting provider to do a reverse DNS entry. If you don't have........

  • Failed to save enabled features : The Suexec command on your system is configured to only run scripts under /var/www, but the Virtualmin base directory is /home. CGI and PHP scripts run as domain owners will not be executed.


    Apache/httpd Failed to save enabled features : The Suexec command on your system is configured to only run scripts under /var/www, but the Virtualmin base directory is /home. CGI and PHP scripts run as domain owners will not be executed. This is because I never edited the Apache Config and Virtualmin config to reflect my new/current updated structure.........

  • VMWare bridged adapter not working: The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet1.


    VMWare bridged adapter not working: Message from system: The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet1. I'm not sure how to fix this but one of the issues is that my eth0 became eth1 after moving my hard drives to a new motherboard. I have run the vmware-config.pl but this did not resolve the issue.........

  • Installing Webmin & Enabling SSL


    Webmin Setup Centos 5: wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet [1] 24229 [2] 24230 [root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html Resolving downloads.sourceforge.net... 216.34.181.........

  • Walmart.ca & Ubuntu Caused Xorg 100% CPU usage


    I can't tell if it's Flash or Javascript that they were using, but it basically caused my sysetm to lockup until I closed that one page. Is this proof enough that Wal-mart is evil?:) I've never seen that before, it's weird how certain things mask themselves as high CPU usage with Xorg, unless it is some kind of weird Xorg problem but I believe it's more of a Flash/Javascript issue from Firefox in Wal-mart's evil scripting.........

  • mdadm/md-check how to check array integrity without rebuilding


    This doesn't seem to be widely known (maybe it's in some documentation that none of us read though)but there's an easy way to check the integrity of any mdadm array: sudo echo check > /sys/block/md0/md/sync_action -bash: /sys/block/md0/md/sync_action: Permission denied sudo will never work, this only works as root since echo is not actually a binary/command. It is built-into bash. /sys/devices/virtu........

  • Ubuntu 10.04/GNOME Volume Control Missing From Panel/Indicator Applet


    What this really refers to is gnome-volume-control-applet which is what controls the volume in the panel/indicator applet. In Ubuntu 10.04 it is just the applet mentioned above, run that from the command line and it will start. I lost mine when I removed pulseaudio trying to fix audio issues with Flash and Opera. It also removes the gnome-volume-control-applet from starting. *Ialso note........

  • Ubuntu/Debian DRBD 8.0 Setup Guide


    I've only used it on Centos, soI thought I'd make a quick Debian guide: Install the DRBD Package apt-get install drbd8-utils Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libswfdec-0.8-0 Use 'apt-get autoremove' to remove them. The following........

  • VMWare Server cannot connect to web interface SSL Handshake on client connection failed: SSL Exception


    VMWare log: /var/log/vmware/hostd.log SSL Handshake on client connection failed: SSL Exception sudo /etc/init.d/vmware-mgmt restart Stopping VMware management services: VMware Virtual Infrastructure Web Access VMware Server Host Agent&nb........

  • VMWare Server is on SSL port 8333


    I'm mentioning this because I keep forgetting what port the management is on for the web interface (since newer releases of VMWare server took away the superior stand alone client). So remember it is port 8333 and sometimes you need to restart vmware-mgmt service and also enable sslv2 in your Firefox or it won't connect.........

  • yum error with some versions of Centos Refusing to automatically import keys when running unattended. Use "-y" to override.


    Refusing to automatically import keys when running unattended. Use "-y" to override. When using echo y|yum install gcc Fix with rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*........

  • WD (Western Digital) Advanced Format Drive Lagged/Slow Speed/Performance/Design Flaw EAD/EARS problem WDC WD20EARS-00S8B1


    Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive. This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series. To make it worse this is also when Western Digital introduced "Advanced Format" o........

  • Firefox plugin-container high CPU usage


    This is an easy fix and highlights a huge issue again with Linux and Flash still not playing nicely/working as well as Windows yet. Solution - Go to "about:config" and disable the two entries (set them to false): dom.ipc.plugins.enabled.libflashplayer.so dom.ipc.plugins.enabled.libnptest.so........

  • mdadm won't boot due to fsck error


    Nov 29 20:17:58 ubuntu kernel: [ 1157.180789] md: md1 stopped. Nov 29 20:17:58 ubuntu kernel: [ 1157.180829] md0: unknown partition table filesystem not responding/reading properly with du or rsync (this needed an fsck). [ 2571.489217] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923106 [ 2571.942299] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923110 [ 2571.9568........

  • Ubuntu 10.04/GRUB2 mdadm won't boot


    Moving to RAID was a pain. What you have to do is the following from an existing install: Install mdadm Create your mdadm RAID 1 array on your spare hard drive. Start it with the missing disk. rsync the entire contents of your current / to the md partition. Here's a good way of doing it: rsync -Pha --exclude=/proc/* --exclude=/sys/* --exclude=/mnt/* /. /mnt/md2........

  • Subnet Mask Lengths / Quick Reference


    Subnet Mask Lengths / Quick Reference This is for when you say how many IPs would be in a /20 or /24 Now instead of doing math just remember this table or visit here more often :) /32 1 IP Address(es) /31 2 IP Address(es)........

  • Linux How To Add/Delete A Default Route/Gateway


    Remember to replace "eth0" with your NIC device although usually it will be eth0. Replace 192.168.1.1 with your default gateway, remember you can also add multiple gateways by adding a second/different default gateway. route Kernel IP routing table Destination Gateway Genmask&nb........

  • mdadm Linux Software RAID QuickStart Guide


    Create New RAID 1 Array: First setup your partitions (make sure they are exactly the same size) In my example I have sda3 and sdb3 which are 500GB in size. mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sda3 /dev/sdb3 mdadm: array /dev/md2 started. Check Status Of The Array *Note I already have other arrays md0 and md1. You can see below that md2 is syn........

  • FUSE/Curlftpfs mount ftp account as drive partition in Linux


    This is a great way to use your ftp server space, for example on your web hosting account (althoughI believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect. Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc.. Name curlftpfs - mount a ftp host as a local directory Synopsis........

  • Why does mdadm have two sets of UUID's?


    Which one does the OS care about? blkid says the UUID is "787f1fa4-b010-4d77-a010-795b42884f56" while md insists its UUID is "4d96dd3b:deb5d555:7adb93cb:ce9182d9" When in doubt, do we assume the OS takes the one from blkid? /dev/md0: UUID="787f1fa4-b010-4d77-a010-795b42884f56" TYPE="ext3" [root@localhost ~]# mdadm -D /dev/md0 /dev/md0: Version : 0.90 &........

  • mdadm force/fix proper md127 name


    I have an md0 arary that my Centos install refers to. I feel this is half the reason why it won't boot anymore. I saw the initrd for Centos was assembling it as md127 even though it was known as md0. The reason for this is because I used mdadm --assemble --scan to detect the array on a LiveCD. I had no idea this name would stick (but now I realize the name is permanently stored in the metadata once you mount md127 or whatever random name assemble gives it). W........

  • Compile PHP 5.3.2 on Centos 5 and CPanel/WHM because of error - Fatal error: Call to > undefined function imagecreatefromjpeg()


    This function and others may not work with the stock PHPinstall on Centos/CPanel: Fatal error: Call to > undefined function imagecreatefromjpeg() Even with libjpeg-devel installed it won't work because PHP was not compiled with jpeg support, so we have to do the dirty work ourselves :) Here is the command/yum's I did to install missing libraries for PHP that configure will complain about (yes it is a one by one process). yum install bzip2-........

  • crontab Reference/How To/Info/Guide


    I can never actually remember the order and the number of parameters so here they are: minute hour day of month month day of week command 0 5 *........

  • Convert HDD/Hard Drive Partition(s) into non-RAID into RAID 1 using existing data without data loss and without reformatting.


    Before we start I take no responsibility for this, you should have a backup and if you make a mistake during this process you could wipe out all of your data. So backup somewhere else before starting this as a precaution, or make sure it's data you could afford to lose. The RAID 1 Setup (Hardware Wise) I've already setup my 2 x 1TB (Seagate) drives with identical partitions, make sure your new hard drive (the empty one) is setup like your curr........

  • Linux EXT3 16GB-17GB maximum filesize issue solved/how to fix


    I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB! I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition. Here is what tune2fs tol........

  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........

  • JavasScript how to set or write value in id tag


    JavasScript how to set or write value in id tagbla I need to set a value inside that DIV tag using Javascript, how would I do it?Doesn't work for me: [quote:c6b5f693a5]Warning: Element referenced by ID/NAME in the global scope. Use W3C standard document.getElementById() instead. Source File: http://hosting.com/vps-order.html Line: 19[/quote:c6b5f693a5] [code:1:c6b5f693a5]........

  • Asterisk FreeBSD compile problems


    Asterisk FreeBSD compile problemsI couldn't get it to compile without using the following options at compile time: [b:b7d672ee28] make install WITHOUT_ZAPTEL=YES WITHOUT_MYSQL=YES WITHOUT_FAX=YES WITHOUT_ODBC=YES WITHOUT_H323=YES[/b:b7d672ee28]Some problems you might have with copying over your Linux config files to FreeBSD is different paths. [b:f044931f41]For example the etc path for Asterisk on BSD will now be:[/b:f044931f41] [qu........

  • Nice tutorial on working with browser windows


    Nice tutorial on working with browser windowsCheck: *if a window is open/exists * how to close a window and more.. http://www.webreference.com/js/tutorial1/exist.html........

  • Telus + 2Wire 2700 Router Horrible


    Telus + 2Wire 2700 Router HorribleWell first of all let me say this is the only router/switch that sometimes seems to crash/disconnect computers on the local network. This device also thought it would be smart to block VOIP packets coming from my Sipura ATA VOIP adapters so I disabled the [quote:cb89ba7bff]"Invalid TCP Flag Attacks (NULL/XMAS/Other)"[/quote:cb89ba7bff] option Then all of a sudden I couldn't get onto any web pages, the wireless........

  • Quick Tutorial On Starting A Web Site


    Quick Tutorial On Starting A Web Site[b:3cef3c01b6]Step 1.[/b:3cef3c01b6] Purchase a Domain Name (eg. yoursite.com) [b:3cef3c01b6]Step 2.[/b:3cef3c01b6] Design your site using a program such as Microsoft Frontpage or Macromedia Dreamweaver. If you are unable or unfamiliar with doing this you may want to hire a company to create your site (many of them will handle each aspect of setting up your site). [b:3cef3c01b6]Step 3.[/b:3cef3c01b6] Host your site........

  • Asterisk Queue Context Explained


    Asterisk Queue Context ExplainedThis was never explained in voip-info or any other site I read. It is understood you can escape to a context from a queue and how to specify it. [b:882f1e0aee] What is NOT mentioned is that the context= you specify within the queues.conf refers to a [i:882f1e0aee]context that exists in extensions.conf[/i:882f1e0aee][/b:882f1e0aee] This will save you headaches if you need to escape from the queue :)........

  • CVSUp the Easy Way


    CVSUp the Easy WayIf you're reading this you probably have never used CVSUp or don't know how. CVSUp can be used for two things or just one if you prefer. *Keeping your kernel up to date *Keeping your port list up to date Start by editing the following file in: [b:76928b387d]vi /usr/share/examples/cvsup/cvs-upfile[/b:76928b387d] It can be quite overwhelming with all the crazy options. Basically there are only 3........

  • CDR Manufacturers - Why is so much media bad?


    CDR Manufacturers - Why is so much media bad?I have searched for good media and tried many kinds for years. I guess I'll try to summarize my findings and conclusions. Dye is irrelevant, dye of any color can be good or bad, it more likely depends on the manufacturer. Speaking of manufacturers, the name at the top of the disc means nothing. For example, Memorex along with any other 'brand' is actually always made by another manufaturer including CMC Mag........

  • Use Mozilla Firefox, not Internet Explorer - You'll be glad!


    Use Mozilla Firefox, not Internet Explorer - You'll be glad!Hey guys, I just thought I'd recommend that everyone switch to Mozilla Firefox as their web browser. You can find it at http://mozilla.org It is free and it is much better than IE. It has a built-in popup blocker which works great and most importantly, it doesn't have a million critical security flaws which could compromise your security such as passwords for on-line banking etc..........

  • Broadband Preferences


    Broadband PreferencesLet's see what people prefer.........

  • Linux Kernel Error (2.6.33.1) BUG: Bad page state in process swapper - Keeps rebooting - initramfs bug


    *This is a bug with initramfs support, all kernels after around 2.6.27.54 suffer from this problem. If you try to include initramfs into your kernel (I mean actually building your binaries into the kernel) this will always happen. Obviously some code has changed in recent kernels that is present in all new kernels, it makes it impossible to boot I've tried the latest 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36, 2.6.37, 2.6.38 kernels and they all do this. I found one bug re........

  • How to Track Down/Find Cause of Linux high disk iowait/wa


    top - 09:34:12 up 2 days, 20:57, 2 users, load average: 1.83, 1.99, 2.03 Tasks: 59 total, 2 running, 57 sleeping, 0 stopped, 0 zombie Cpu(s): 0.3%us, 0.0%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st That 99.7% wa is iowait, it means the server is waiting for a process to complete an IOoperation or in plain English, there is a delay in........

  • Clustered/Distributed Network Filesystems, Which Ones live up to the hype?


    I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems. DRBD I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........

  • Linux Bash Shell Cannot/Can't View File That Starts With - Dash ?


    Iwas getting really annoyed with this, I used full quotes around the filename and vi, cat, less all thought I was trying to pass the dash in the filename as an argument. I didn't realize that all you have to do is just put a dash dash "--"in front. Here's an example:cat -- "-etc-glusterfs-glusterfsd.vol.log" Without the -- you get: cat: invalid option -- c Try `cat --help' for more information. Ih........

  • SIOCSIFADDR No such device eth0 error while getting interface flags - eth0 Ethernet Device can


    Igot this after copying a VMWare image onto another machine in Debian. SIOCSIFADDR No such device eth0 error while getting interface flags The solution 1.) Find and edit the device line in persisent-net.rules note it will be prefixed with something like z25 or something else. vi /etc/udev/rules.d/z25_persistent-net.rules The easiest way is to comment anything out. If you are feeling........

  • OCFS2 crash


    When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it. More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things. Output of /var/log/messages for OCFS2 Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........

  • Viewing and Connecting to an SMB Samba Share on Windows/Linux/Unix


    This will give you the basic info needed to browse and connect to Samba shares from the command line. From the GUI of Gnome or KDE etc, it is pretty standard and straight forward. However, I've found very little guides on how to do it from the command line and if you're like me, a nerd who prefers command line for its simplicity and for remote use, this is the way to go. First get a list of all the Samba/SMB shares on the target. smbclient -L hostname........

  • LAME MP3 Encoder Segmentation Faults


    This happened on one of my Ubuntu machines where Igot some kind of segfault on line 21 from LAME at random while encoding MP3s (a second try is fine usually). I've read that it's best to compile it from source and that has solved most issues for people. Here is my preferred configure line: ./configure --enable-mp3x --with-fileio=lame --enable-debug --with-vorbis Even with that I got a different error this tim........

  • Writing/Burning a data CD-R/DVD-R or DVD+RW in Unix/Linux


    There's a lot of outdated information and confusion for system administrator's out there. One annoying task for many an Administrator has been backing up data in Linux. You don't need any GUI tools such as K3B or GnomeBaker. Both are excellent tools but for veteran command line users working remotely, using the keyboard is a great and possibly automated way to save yourself pain and hassle. At a later date we'll cover how scripting can automatically backup certain........

    • Latest Articles

  • How high can a Xeon CPU get?
  • bash fix PATH environment variable "command not found" solution
  • Ubuntu Linux Mint Debian Redhat Youtube Cannot Play HD or 4K videos, dropped frames or high CPU usage with Nvidia or AMD Driver
  • hostapd example configuration for high speed AC on 5GHz using WPA2
  • hostapd how to enable and use WPS to connect wireless devices like printers
  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730
  • Cloned VM/Server/Computer in Linux won't boot and goes to initramfs busybox Solution
  • How To Add Windows 7 8 10 11 to GRUB Boot List Dual Booting
  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile
  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial
  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif
  • Linux Debian Mint Ubuntu Bridge br0 gets random IP
  • redis requirements
  • How to kill a docker swarm
  • docker swarm silly issues
  • isc-dhcp-server dhcpd how to get longer lease
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian
  • zfs and LUKS how to recover in Linux
  • [error] (28)No space left on device: Cannot create SSLMutex Apache Solution Linux CentOS Ubuntu Debian Mint
    • Copyright © realtechtalk.com 2024