• Wordpress overwrites and wipes out custom htaccess rules and changes soluton


    cat .htaccess RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . index.php [L] I keep reading there is a "# BEGIN WordPress" and a "# END WordPress" in the wordpress htaccess above but there is clearly not. Even more strange is that my permissions are just 444 (read only). so i changed it........
  • Apache htaccess and mod_rewrite how to redirect and force all URLs and visitors to the SSL / HTTPS version


    It is really simple using .htaccess with mod_rewrite. Here is all you need: RewriteCond %{SERVER_PORT} 80 RewriteRule ^(.*)$ https://site.com/$1 [R=301,L] Another more graceful way is to use the %{SERVER_NAME}variable to make it dynamic. Just be careful that the server name will always match what you expect. (eg. if you are doing load balancing or clustering what if the server name may be somethi........
  • Firefox Cannot Hit Enter Key In Address Bar and Location History Not Working


    Opening Firefox from the CLI reveals the following as the cause of the error: Query failed: Error: Error(s) encountered during statement execution: no such table: moz_favicons The symptoms of this issue are that in the address bar you cannot hit enter to browse to a site/url/address and your history cannot be accessed, nor does your history show up in the address bar when typing previously used addresses. This usually happens because you've........
  • Cisco Unified Communications Manager / CUCM IP 8.6,10,12 Install Error Solution


    Install Errors on Version 12: This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5 on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error. *Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install. What really causes this even though you successfully install........
  • Cisco Unified Communications Manager 12 Install Errors on Proxmox/KVM


    The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs. qemu-kvm command: /usr/libexec/qemu-kvm -version QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard ........
  • WebRTC Vulnerability Shows Local IP Address Even When Using a Proxy or VPN Firefox Fix And Disable Solution


    If you visit a site that exploits the WebRTC vulnerability including whatismyipaddress.com it may show "Local IP Address" which would be the real IP of your machine. The vulnerability works on Windows and Linux machines (contrary to false information on the web which claims it only affects Windows). The above works and happens even if you are using a proxy or VPNaccount like ProVPNAccounts.com It is easy........
  • How to install and setup LXC Containers (OpenVZ alternative) on Centos 6 / 7


    If you don't aleady have it, you'll need EPEL Install LXC yum -y install lxc lxc-templates Loaded plugins: fastestmirror Setting up Install Process Loading mirror speeds from cached hostfile * base: mirror.it.ubc.ca * epel: mirrors.kernel.org * extras: mirror.it.ubc.ca * updates:........
  • Cisco Router Setup Guide and Tutorial Howto With Commands and Examples


    In most of the Cisco router IOS I find the ports like ge0/0 ge0/1 and ge0/2 or whatever your ports are down. They will not even give you a link light. So one of the first tasks should be getting the port you are working with up. In my case the first goal is often connectivity with the LAN and WAN. LAN = your local area network (eg. in the office/home ) WAN= your ISP/public internet (eg. fiber/cable/dsl/ethernet). In these examples I as........
  • Centos 7 Reallocate logical volume space to another


    Do you hate how Centos 7 defaults to allocating most of your valuable space to /home even though it is a production server? Here is a quick guide on how to take back that space live, while online (of course make sure you have backups just in case something goes wrong!): First we will reduce our home dir by 100G: lvreduce -L -100G /dev/mapper/centos-home WARNING: Reducing active and open logical volume to ........
  • lvm how to reduce volume size


    lvreduce -L -100G /dev/mapper/centos-home Do you really want to reduce centos/home? [y/n]: y Size of logical volume centos/home changed from ........
  • Thunderbird How To Disable An Email Account


    Navigate to Tools -> Account Settings -> Server Settings Uncheck the following: "Check for new messages on startup" "Check for new messages every NN minutes" "Automatically download new messages". Source: http://forums.mozillazine.org/viewtopic.php?t=635510........
  • LVM How To Create Pool (dynamically allocated and not fully allocated)


    The main use I have for this is virtual servers being able to use an LVM volume but not occupying all of the space. It saves time in deploying machines and copying them so you are only copying the space they are using (eg. 5GB / 60GB vs the full 60GB). There are some disadvantages which is mainly the fact that thin pools by their nature allow you to "overallocate" disk space which is that you could use more space than is available on the disk itself and corrupt your data........
  • Why SMART is not smart at all and doesn't properly predict disk errors that cause a kernel panic or crash


    Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated. It has caused a kernel panic and system crash repeatedly as we can see from the logs. But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector. Any time I have had anything but 0 for that attribute it........
  • iSCSI on Centos 7 Configuration and Setup Guide for Initiator and Target


    initiator = client target = server These are the first concepts you should understand which is that in iscsi essentially the "initiator" is the client and the "target" is the server. iSCSI is derived from the old fashioned SCSI that us oldtimers grew to love. The "i" stands for Internet and the SCSI stands for "Small Computers Systems Interface" (SCSI). iSCSI Target (Server)Setup targetcli is the pac........
  • Bash Script How To Manipulate Text/Strings By Searchig and Replacing Natively


    # a single first slash means first occurrence # format=${haystack/needle/replacement} # if you use a double first slash it means ALL occurrences # format=${haystack//needle/replacement} email=${file/.txt-marked/} In the example above we are searching in the variable $file for ".txt-marked" and replacing with nothing (the empty part after the last / means we are replacing with n........
  • How Does Cisco CUCM (Cisco Unified Communication Manager) Work?


    Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments. Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........
  • bash how to print out lines of text within a range from the first occurrence


    #get line number of occurrence in text file and then print out x lines from that point #get the line number of the first occurrence of our search text linenumber=`grep -n "someuniqueitem" inventory.txt|head -n1|cut -d ":" -f 1` #linestop represents how many lines after the occurring line we want to print out in this case "20" linestop=$((linenumber+20)) # sed prints out the line range we want f........
  • Linux Permissions and Groups Real Usecase for Group Access


    Ihave a directory structure which the primary user needs full access on but wanted a user to access only a specific directory within the main directory (so they could write in there only and nowhere else). Here's what Idid: [root@compevo8001 dllnow]# ls -alh drwxrwxr-x 2 someuser software 4.0K Oct 19 2017 ExpireYMD-2017-11-20 drwxrwxr-x 2 someuser software 4.0K Nov 19 2017 ExpireYMD-20........
  • Linux Kernel USB Export Errors


    4.374647] usb_common: exports duplicate symbol usb_get_dr_mode (owned by kernel) [ 4.403334] usbcore: exports duplicate symbol __usb_get_extra_descriptor (owned by kernel) [ 4.427736] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 4.427844] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 4.429040] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810 [ 4.429141] xhci_hcd 0000:00:15.0: cache line size of 64 is not sup........
  • HP DL385 G7 Linux BIOS Update Flash


    wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe --2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85 Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1525561 (1.5........
  • gvfs mount in /run/user cannot be accessed or displayed wrong permissions


    The folder contents could not be displayed Backend currently unmounting drwx------ 10 userhere group 260 Aug 23 19:40 .. ?????????? ? ? ? ? ? sftp:host=192.168.8.80,user=adhoc ls: cannot access 'sftp:host=192.168.8.80,user=adoc': Input/output error $ ps aux|grep fuse one 253........
  • VMWare Vsphere VCSA Graphical Install Creates json


    yes it does create its own json ============================================ cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json 2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1 --> ........
  • Debian Mint Ubuntu compiling xmr-stak


    sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3 sudo apt-get install libcurl4-gnutls-dev git clone https://github.com/wolf9466/cpuminer-multi sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev git clone https://github.com/fireice-uk/xmr-stak-cpu.git make install cd bin chmod +x xmr-stak-cpu ./xmr-stak -O xmr........
  • Centos 7 - How To Install NFS and Mount Remotely


    Server Side Config 1.) First install nfs-utils yum -y install nfs-utils 2.) Configure nfs share Create a directory for your NFS share mkdir /datastore Create your NFS share in /etc/exports echo "/datastore 10.220.101.0/24(rw,sync,no_root_squash)" >> /etc/exports systemctl restart nfs........
  • wodim / cdrecord error cannot burn DVD or BDR .iso Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error


    dvd+rw-mediainfo /dev/sr0 INQUIRY: [ASUS ][BW-16D1HT ][3.00] GET [CURRENT] CONFIGURATION: Mounted Media: 11h, DVD-R Sequential Media ID: RITEKF1&n........
  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
  • Cannot create gradle for conversations


    The main issue is it looks like Java is not configured to accept the invalid ssl cert that is coming from the download location. Exception in thread "main" java.lang.RuntimeException: javax.net.ssl.SSLException: java.security.ProviderException: java.security.InvalidKeyException: EC parameters error export ANDROID_HOME=/home/user/Downloads/tools/ Conversations-master$ ./gradlew Downloading https://services.gradle.org/distributions/grad........
  • named [FAILED] - zone 1.168.192.in-addr.arpa/IN: not loaded due to errors. - bind error solution


    Centos when copying old files and restarting it seems load everything fine and then says [FAILED] with no log or other message. service restart named named [FAILED] Check more thoroughly you may have missed the error if you have lots of zones! service named restart|grep error zone 1.168.192.in-addr.arpa/IN: not loaded due to errors. zone 2.168.192.in-addr.arpa/IN: no........
  • No comments are allowed here Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request.


    Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.15 (CentOS) Server at testdomain.com Port 80........
  • Linux Mint Black Screen after boot no graphics solution


    This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help. Here is the short end of the stick that fixed it: sudo apt-get install mdm mate-desktop-environment Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........
  • Duplicate entry '2147483647' for key 'PRIMARY' MySQL Error Solution


    This usually happens when you are using something like an INT and try to insert a larger valuethan the maximum which is larger than "2147483647" On a practical term I have seen this and been guilty of this error when using scripts like PHPand generating large random numbers: $hash = mt_rand(5,9999999999999); Obviously that many 9's are more digits than the maximum of an INT resulting in that error. Change your code accord........
  • imagemagick convert to chop off top of image


    This is useful if you have a bunch of images/scans where the same area at the top needs to be chopped. Sometimes the -trim option (such as the case of white space on top)is wrong and ends up cropping the image and losing some text. ImageMagick's convert is very useful but tricky to find some things out as I find it to be less than intuitive sometimes. Chopping off the bottom convert -crop -0-400 image.jpg image.pdf........
  • Apache htaccess Custom ErrorDocument not working properly for root home page 403 Error Issue and Solution


    So I have a domain "testdomain.com". Inside test domain.com's root is the following .htaccess: Options +FollowSymLinks -Indexes ErrorDocument 403 /launch/index.html Order Deny,Allow Deny From All Allow From 192.168.1.2 When you visit anything other than root things work fine. Eg. if you visit http://testdomain.com/somedirfile.html It will show the right error in /launch/........
  • Linux input/output error invalid program cannot read data on some CD-Rs and DVD-Rs on ASUS BW-16D1HT


    I've never seen this before in all of my years. Ihave some very old CDs and DVDs 12-15 years old that seem not to work in this BD-R/DVD-R/CD-R Asus drive. The discs are fine actually and ironically they even work fine on a normal LG USB based BD-R drive! Here are the errors in Linux: [2914936.884924] attempt to access beyond end of device [2914936.884927] loop1: rw=0, want=730424, limit=688384 [2914954.556873] attempt to........
  • Installing SSL Certificate with Chain Intermediary CA File


    Some of the cheaper or newer SSL suppliers will require this to work properly (otherwise you may be prompted that the cert is invalid when it's not the case but it will certainly scare off your users!). In the Apache vhost conf for the domain here is what you add: SSLCACertificateFile /path/to/your/cafile.pem Here is a full example of an SSL Vhost config in Apache using a CA Certificate file ........
  • htaccess apache how deny/allow to block or allow by IP address


    order deny,allow Deny From All Allow From 8.8.8.8 A simple and quick way to improve security by only allowing specific IPs to your web application. In this case the above allows only the IP 8.8.8.8 to access things and everything else is denied.........
  • GCC 5 on Centos 6 - How To Install


    Install requirements: yum -y install gmp-devel mpfr-devel libmpc-devel glibc-devel glibc-devel.i686 zip unzip jar Download, untar, configure, compile and install GCC http://mirrors.kernel.org/gnu/gcc/gcc-5.5.0/gcc-5.5.0.tar.gz tar -zxvf gcc-5.5.0.tar.gz cd gcc-5.5.0 ./configure make make install Now you need to cleanup th........
  • How To Create Apache htpasswd file


    This just simply outputs what you need a username and password that can be used to authenticate from .htaccess htpasswd -nb user password user:Gnb6uE9Lp4gt2 If you want to write it straight to a file htpasswd -cb /tmp/somefile.pw user password How To Use This In .htaccess AuthUserFile /tmp/somefile.pw AuthName GetLost!! AuthType B........
  • How To Secure Samba NMBD/SMBD to bind to a specific IP address


    By default Samba SMB/NMB listen on ANY and ALLIPs on your system by binding to 0.0.0.0. Obviously this is a huge security risk if you have a public facing server with both internal and external access. Usually when a system administrator sets up a samba server their intention is just to share with a LAN. To do this you need to the following options under the [global] section in smb.conf bind interfaces only = yes interfaces = 192........
  • dhcpd.conf how to secure so only known and allowed clients will be given dhcpd IP address leases


    It's really simple and just a matter of the following line within the subnet declaration. deny unknown-clients; See example below: subnet 10.25.20.0 netmask 255.255.255.0 { range 10.25.20.11 10.25.20.254; deny unknown-clients; option routers 10.25.20.10; option domain-name-servers 208.67.222.222;  ........
  • ffmpeg vidstab to stabilize video


    I'm having trouble making it work on very shaky video the result seems kind of warped/blurry/fish eye like and not as good as some other examples I've seen: ffmpeg -i MVI_1285.MOV -vf vidstabdetect=shakiness=10:accuracy=15 -f null MVI_1285.trf ffmpeg -i MVI_1285.MOV -vf vidstabtransform=smoothing=30:input="transforms.trf" MVI_1285.MOV.mp4 I've played around with the shakiness, accuracy etc.. but not the smoothing part.........
  • tar how to ignore failed reads and not exit


    This is an important feature a failed read can genuinely occur if a temporary file has been removed or if you try backing up a sysetm file in /proc /sys (which you shouldn't really anyway). The way to fix this is the following switch: --ignore-failed-read Example: sudo tar --ignore-failed-read -czvf mycomputer-backup.tar.gz --exclude=/home/otheruser/* --exclude=/proc/* --e........
  • ffmpeg trouble concatenating similar but different files


    When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right. Solution for me: My example uses 3 videos in total so "n=3" and a=1 to include audio. ffmpeg -threads 12 -i file1.mp4 -........
  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd ffmpeg-3.3.2/ ./configure --disable-yasm install prefix /usr/local source path ........
  • USB 3.0 External HDD Enclosure Seagate UAS problems - [sdd] tag#1 CDB: Write(16) 8a 00 00 00 00 01 70 04 08 68 00 00 00 08 00 00


    This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether. Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........
  • Centos 7 Cudaminer Nvidia setup guide


    I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us yum install automake curl openssl-devel libcurl-devel gcc gcc-c++ yum -y install kernel-devel-`uname -r` yum -y install unzip #the........
  • USB Device/MP3 Player not working properly and can't browse the device filesystem? Check the cable twice and again!


    Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues. Take for example the error messages from Linux Mint: [804829.895414] usb 1-1: USB disconnect, device number 11 [806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........
  • Openshot 2.2 is very unstable always crashing in Linux Mint 18.1!


    Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user: Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4 Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........
  • Apache SSL very slow response with Firefox Freezes/Loads Very slow when checking self-signed SSL certificate


    I was sure this was a Centos bug with OpenSSL, Apache, MySQL or even PHP. I tried everything but nothing helped. One clue is that if you check the Apache logs you will see nothing in the access logs until minutes later (this means Firefox has not even passed your request to the remote Apache/htttpd server). When even accepting the invalid certificate message that would show up minutes later when trying to "View the Certificate" Firefox would freeze. This bu........
  • Track 01: 34 of 1726 MB written (fifo 100%) [buf 99%] 3.6x.Errno: 5 (Input/output error), write_g1 scsi sendcmd: cmd timeout after 1.897 (40) s CDB: 2A 00 00 00 44 A9 00 00 1F 00 resid: 6144 cmd finished after 1.897s timeout 40s write track da


    These errors believe it or not are simply because of not being the root user or running with sudo! However if you didn't know to try as root you'd think there was a problem with your burner or disc Essentially it looks like without root you cannot send the required scsi commands to continue writing. Ithink cdrecord should have built-in tests or safeguards to see if it has the permissions to run the required commands. I guess for more advanced users the idea is simila........
  • Intel NUC J3455 Linux Support Ubuntu/Linux Mint Issues


    I get the following error "Installer Crashed" on 18.1 MATE 64-bit when installing by NFS/PXE. Yet it was able to at least detect and use my NIC (perhaps the driver was only activated because of PXE/NFS being used)? When using 18.1 Cinnamon on CD the NIC does not work but the installer did succeed. However it doesn't work right, I can't login graphically and get some Cinnamon OOMerror but how can this be with 8GB of RAM straight from login?........
  • Linux Mint Install Netboot PXE Guide Howto


    *Update so this doesn't work it must be something to do with the path of nfs or something else but the installer fails with "Installer crashed" at the end whereas with the CD/USB it works. This assumes you've already installed and configured a separate PXE/DHCP server somewhere else and your /tftpboot directory is setup. This is for Linux Mint 18.1 but generally applies to most versions although you may have tro change things like "casper"........
  • [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) - Apache Error Solution


    Does this mean? [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) Basically it means you created your SSL Certificate as a CA the wrong way, usually with this command: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key How can you fix it and do it properly? Step 1.) Make a new Private KeyCreate server pass key:........
  • cPanel error Access denied for user 'root'@'localhost' when adding remote MySQL IP address solution


    Error while connecting to MYSQL: (XID 4ea7s9) Access denied for user 'root'@'localhost' (using password: YES) at /usr/local/cpanel/Cpanel/Mysql.pm line 181 Solution This error occurs because the /root/.my.cnf has the wrong/outdated password for MySQL root user. Simply edit /root/.my.cnf with the correct user. This normally happens if you update outside of cPanel.........
  • phpBB3 slow and internal dummy connection


    Using Apache 2.2 and PHP5.6 PHPBB3 is very slow to respond. Actually for some reason it takes so long to even register a log entry in access_log as in several seconds or a few minutes later it shows up in Apache. All other vhosts and Apache access stops working and freezes until the request to access PHPBB3 slowly completes. It seems to randomly be slow if you stop using it whether for posting or reading the forums. I've migrated to different machines including........
  • Avocent DSR8020 KVM/IP - Network Connect Error - Solution


    This error is commonly due to Java security or TLS settings but there is a second issue with forwarded ports that also causes it. 1. Java Security/TLS Settings issue: This article has the solution to change them all in Linux automatically 2. Port Forwarding Issue if your Avocent DSR is behind NAT/private IP........
  • What happens when you unplug 1 or more devices from an mdadm RAID array to simulate a failure in Linux Ubuntu/Centos/Debian?


    In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below. mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore. [45817.162728] ata4: exception........
  • How to Execute PHP in .html files with Apache in Linux Centos/Debian/Ubuntu etc


    Add this to the .htaccess file #right/working: AddType application/x-httpd-php .html .htm #wrong (won't work in many cases): AddHandler application/x-httpd-php5 .html .htm........
  • How To Disable htaccess inheritance or exclude a directory


    The only real way us to do the following in the root of your site's .htaccess RewriteRule ^somedirectory-not-to-inherit/.*$ - [L]........
  • mdadm and lvm how to completely disable and remove vg/pv/lv


    In short the solution is just to use vgremove for the actual /dev/mapper device: vgremove /dev/mapper/backups-backuplv box mnt # mdadm --manage /dev/md8 --stop mdadm: Cannot get exclusive access to /dev/md8:Perhaps a running process, mounted filesystem or active volume group? box mnt # lv lvchange lvconvert lvcreate l........
  • K9 Mail Android Cannot See or View E-mails Disappear after reading - with Dovecot server. Solution


    This actually only happened after an e-mail server ran out of space due to run away log files. Normal Desktop clients were not affected. It appeared to be a bug in K9 mail but even reinstalling/wiping all settings did not fix it (read e-mails would still not reappear). This is moreso a bug in Dovecot where it probably messes up the index files. How do you fix this in Dovecot/your e-mail server? You need to delete the do........
  • ERROR 2013 (HY000): Lost connection to MySQL server during query


    The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files. UPDATE user SET password=password("newpass") WHERE user='root'; flush privileges; ERROR 2013 (HY000): Lost connection to MySQL server durin........
  • MySQLD Server shutdown remotely unexpectedly


    170110 5:35:23 [Note] /usr/libexec/mysqld: Normal shutdown 170110 5:35:23 [Note] Event Scheduler: Purging the queue. 0 events 170110 5:35:23 InnoDB: Starting shutdown... 170110 5:35:24 InnoDB: Shutdown completed; log sequence number 0 12765401 170110 5:35:24 [Note] /usr/libexec/mysqld: Shutdown complete 170110 05:35:24 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended........
  • remove gpt partition linux


    sudo fdisk /dev/sdh WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util fdisk doesn't support GPT. Use GNU Parted. WARNING: The size of this disk is 8.0 TB (8001563221504 bytes). DOS partition table format can not be used on drives for volumes larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID partition table format (GPT). The device presents a l........
  • mdadm change wrong device name md127 fix and solution in Linux


    md127 issue, it should be /dev/md3 per mdadm.conf Any time something is mounted as md127 it almost always means there is no entry for this mdadm array in the mdadm.conf in initramfs (which is separate from your actual /etc/mdadm.conf). cat /etc/mdadm.conf ARRAY /dev/md3 metadata=1.2 UUID=b6722845:381cc94e:7a2c5b5f:8e3b7c4f The reason for this is something strange, most Linux OS's bizarrely always keep their own copy of /etc/mdadm.con........
  • /dev/drbd0: State change failed: (-2) Need access to UpToDate data solution


    Everytime I've seen this error "/dev/drbd0: State change failed: (-2) Need access to UpToDate data" it is because DRBD has no disk: cat /proc/drbd version: 8.3.13 (api:88/proto:86-96) GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51 0: cs:Connected ro:Secondary/Secondary ds:Diskless/Inconsistent A r----- ns:0 nr:0 dw:0 dr:0 al........
  • grubby fatal error: unable to find a suitable template solution Centos


    vzkernel-2.6.32-042stab116.2.x86_64.rpm&n........
  • blocked for more than 120 seconds issues with iowait and timeout on Live Linux distribution while writing to physical disk


    This happened while an mdadm array was syncing, all access from writing a new blank file to opening a small .txt file was very slow: [222117.312078] kjournald starting. Commit interval 5 seconds [222117.685060] EXT3-fs (md0): using internal journal [222117.685096] EXT3-fs (md0): mounted filesystem with ordered data mode [222122.376847] kjournald starting. Commit interval 5 seconds [222122.602825] EXT3-fs (md2): using internal jour........
  • HTML files in Apache still displaying as raw text even with DefaultType, ForceType etc.


    There was only one solution here and it was the following: edit /etc/httpd/conf/httpd.conf Comment the lines for the Mime Magic Module: # MIMEMagicFile /usr/share/magic.mime # MIMEMagicFile conf/magic *Don't forget to restart Apache and clear your browser cache twice I was using DefaultType and ForceType a........
  • Cannot Read License File cPanel Solution


    This can happen because port 80 is not open, or your license has expired and/or your IP is out of date and also if the license server itself from cPanel is having issues. In most cases as long as you have a valid license the following command will solve it: /usr/local/cpanel/cpkeyclt Updating cPanel license...Done. Update succeeded. Building global cache for cpanel...Done Cannot........
  • Centos and obfsproxy install errors


    pip install obfsproxy /usr/lib/python2.6/site-packages/pip/_vendor/requests/packages/urllib3/util/ssl_.py:90: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning. InsecurePlatformWarning You are using pip version 7.1.0, however version 8.1.1 i........
  • There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:


    There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.7.9 (default, Apr 21 2016, 16:51:58) [GCC 4.4.7 20120313........
  • Apache SSL Reverse Proxy Very Slow Solution


    This is a simple fix but not a simple problem and it still doesn't make sense to me. But in a nutshell if your target proxy server works fast when accessing directly over SSL then this may be your issue. It seems SSL does not play nicely when the target proxy destination/host has a riduculously long key (such as 8192 bits long). Now this is normally not a problem, in fact the target server could be accessed with hardly any delay directly despite such a long key.........
  • SAS2008 LSI 9200-E Linux Upgrade Flash Firmware with sas2flash


    Download from here http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9200-8e#downloads sudo Installer_P20_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash -listall LSI Corporation SAS2 Flash Utility Version 20.00.00.00 (2014.09.18) Copyright (c) 2008-2014 LSI Corporation. All rights reserved &nbs........
  • Apache Vhost HowTo Serve Same Content using a different domain and IP


    There are a few ways of doing this and all basically involve using the reverse proxy or "ProxyPass" feature of Apache to accomplish it. 1.) Create a normal vhost and simply symlink the root directory of the site you want to mirror. Eg. originalsite.com and newsite.com /vhosts/originalsite.com/httpdocs You would symlink like this: ln -s /vhosts/originalsite.com/httpdocs vhosts/originalsite.com/........
  • MySQL PHP adding a backslash/escaping apostrophes Solution


    The first thing to diagnose is what is actually in the database (use PHPMyAdmin or CLI). You will of course either find that the backslash is either in the database or not. If the backslash is in the database you probably have magic quotes gpc/runtime on and/or are calling the "addslashes()" function which does this. If you are escaping your data with mysql_real_escape_string() then think again, you probably have magic quotes gpc enabled either in php.ini or........
  • Linksys E2500 DD-WRT Upgrade Instructions and Enabling 5ghz with Tomato Firmware


    1.) Flash directly to this file: http://tomato.groov.pl/download/K26RT-N/build5x-132-EN/Linksys%20E-series/tomato-E2500-NVRAM60K-1.28.RT-N5x-MIPSR2-132-Max.zip *I was never able to get the larger "Mega" file to work, at least not initially so I recommend the file above. To enable 5ghz I had to do the "Clear NVRAM" Option before it was shown. 2.) Or if you don't need 5ghz (most devices do not support it and cannot........
  • A start job is running for /etc/rc.local Compatibility


    According to this and my own experience it is the case that you have started something running in the foreground or a server that does not terminate with a normal rc.d script. The server will reboot once you kill whatever command or process that is.........
  • Force SSL for all URLs Apache htaccess modrewrite


    The best way is as below in .htaccess using modrewrite, any request that is not SSL will be redirected to https://domain.com and the exact same URL RewriteCond %{SERVER_PORT} 80 RewriteRule ^(.*)$ https://domain.com/$1 [R=301,L]........
  • WHMCS CC Encryption Hash Location


    The location of the hash is stored in the configuration.php file and is really a bit of pain to have to pull out everytime but this is how WHMCS stores its encryption key hash to see the full credit card number.........
  • Debian Linux Ubuntu Mint connect to pptp from terminal bash shell


    apt-get install pptp-linux echo "yourvpnusername * yourpasspass *" >> /etc/ppp/chap-secrets vi /etc/ppp/peers/provpnaccounts.com enter (ignore the lines): ============ pty "pptp server.provpnaccounts.com --nolaunchpppd" name testuser #remotename PPTP require-mppe-128 file /etc/ppp/options.pptp ==========........
  • Linux Debian/Ubuntu/Centos How To Force Internet Traffic Through PPTP L2TP OpenVPN Account Only


    The following assumes the computer is local/physical to you and/or it always has a LANIP so it can be accessed on site without having a default gateway. The key to this is not to set a default gateway for your computer or you can set a script on boot or other time to delete the gateway (where eth0 is the NIC you are using): route del default eth0 50.80.20.2 is the VPN server you connect to 192.168.1.1 is your........
  • Avocent 8020 KVM Java Icedtea Viewer


    It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post. *If you get the icedteaweb window but nothing loads or prompts it is probably your security settings that won't even prompt to run it. See this article to solve that problem. To fix this error you need to edit the java.security file m........
  • Centos installing grub problems suspect gpt problem


    grub> root (hd0,0) root (hd0,0) Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) But if you do: root (hd1,0) setup (hd1) it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical). Checking if "/boot/grub/........
  • Virtualbox Error


    In plain English this happens after you upgrade VBOX and it rebuilds kernel modules based on a newer kernel than you are running (eg. you upgraded your kernel but haven't booted into it). It is too bad there is not a standard work around that would allow it to realize this and keep old kernel modules and use them if it detects your current kernel is older than the most recently build modules. =============== RTR3InitEx failed with rc=-1912 (rc=-1912) The........
  • How to get/display full path to file in Linux/Unix


    It is just the readlink command with the -f switch and it will display the full path, very handy to save time when you want to copy and paste the location of a file or script etc.. readlink -f updatehtaccess.sh /var/lib/updatehtaccess.sh ........
  • Windows showing wrong drive size after resizing the VPS/image or cloning howto fix


    1, Enter the command prompt Start -> cmd 2. Start diskpart diskpart 3. Find the drive that has the wrong size list volume 4. Select the volume (in this example we use volume 2) select volume 2 5. Extend the volume extend filesystem *Note the "exten........
  • Centos 6 how to guide convert LVM non-RAID into mdadm 1/10 RAID array live without reinstalling


    Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access. So in this case you add a second physical or disk or already ha........
  • openvz yum problem Centos 6.5 cannot find file on mirror:


    #solution Edit /etc/yum.repos.d/openvz.repo For the first two entries comment out #mirrorlist and uncomment #baseurl and then it worked openvz yum problem Centos 6.5 cannot find file on mirror: yum update Loaded plugins: fastestmirror Determining fastest mirrors * openvz-kernel-rhel6: mirrors.ustc.edu.cn * openvz-utils: mirrors.ustc.edu.cn base ........
  • How To Install Linux Mint 17.2 on mdadm RAID with a separate boot partition


    Iwas surprised to see that Linux Mint at the latest 17.2 version still has NO mdadm installer option, and worse the installer will not be able to create a proper booting environment even when you do install it. How to setup mdadm in Linux mint LiveCD sudo su apt-get install mdadm # partition as you need and then create your mdadm devices # create your SWAP md0 mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /d........
  • clamav freshclam out of date won't update solution


    freshclam ERROR: Can't open /var/log/clamav/freshclam.log in append mode (check permissions!). ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log). Tue Oct 13 13:49:35 2015 -> WARNING: Incremental update failed, trying to download daily.cvd Tue Oct 13 13:49:35 2015 -> WARNING: Can't download daily.cvd from db.local.clamav.net Tue Oct 13 13:49:35 2015 -> Trying again in 5 secs...........
  • status: { DRDY ERR } error: { ICRC ABRT } failed command: WRITE FPDMA QUEUED MCP55 Linux Errors


    [ 2868.041375] ata1: EH in SWNCQ mode,QC:qc_active 0x40 sactive 0x40 [ 2868.041554] ata1: SWNCQ:qc_active 0x40 defer_bits 0x0 last_issue_tag 0x6 [ 2868.041556] dhfis 0x40 dmafis 0x40 sdbfis 0x20 [ 2868.041874] ata1: ATA_REG 0x41 ERR_REG 0x84 [ 2868.042013] ata1: tag : dhfis dmafis sdbfis sactive [ 2868.042163] ata1: tag 0x6: 1 1 0 1 [ 2868.042301] ata1.00: exception Emask 0x1 SAct 0x40 SErr 0x400000 action 0x6 frozen [........
  • Centos/obfsproxy errors


    I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar: yum -y install python-pip python-devel No package python-pip available. #install the EPEL repo python-pip install obfsproxy python-pip install obfsproxy -bash: python-pip: command not found pip install obfsproxy &........
  • flypro EEPROM PLCC32 programmer software error "The device ID does not match, whether to continue operating"


    If you get that message it means you have inserted the adapter or device incorrectly. In my case the adapter needed to be at the rear end of the pins and it caused this message. Do not ignore this message as it may appear to work but you will get errors and in reality your chip will not be erased or programmed even if it appears like it is working.........
  • ECC Errors in action


    Message from syslogd@server at Sep 14 11:35:59 ... kernel:[Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB. Message from syslogd@server at Sep 14 11:35:59 ... kernel:[Hardware Error]: Error Status: Corrected error, no action required. Message from syslogd@server at Sep 14 11:35:59 ... kernel:[Hardware Error]: CPU:6 (10:8:0) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc00400021080813........
  • Avocent Unable to load resource avctVideo.jar


    Avocent Unable to load resource avctVideo.jar Avocent requires port 80 and 443 to be forwarded or you will get a message like above if it's on a NAT network and you are accessing it from the outside (internet).........
  • Dell CS24 NV5/NV7 Gigabyte GA-3CESL-RH Motherboard ROM Chip info


    If you remove the white label on the chip (near the CMOS battery) you will find the following details about it: SST 49LF080A 33-4C-NHE It is the PLCC32 type and can be pried and removed safely (but be very careful) with an eye glass flat head screw driver. If you just have a bad flash you may be able to reprogram your original or just buy another one with the part# above and reprogram it. This is great news for people who have bricked th........
  • HP Procurve Switch 2824 CLI Telnet Experience , Guide and Tutorial


    telnet 192.168.1.54 ------------------------------------- ProCurve J4903A Switch 2824 Software revision I.10.77 Copyright (C) 1991-2009 Hewlett-Packard Co. All Rights Reserved. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by the Government is subject........
  • Dell CS24,FS12 NV5 and NV7 1U Server Information & Parts


    Motherboard: Gigabyte GA-3CESL: http://b2b.gigabyte.com/products/product-page.aspx?pid=2658#dl Dell Part Numbers for the motherboard: R1232 R1232L R2232S SERVER MOTHERBOARD GENUINE 408P9 CN-0408P9 GA-3CESL Manual Download here RAMSlots: 16 (8 controlled by each CPU) RAMType: DDR2 ECC 5300P........
  • Unable to configure RSA server private key SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch


    [Tue Jun 23 02:05:52 2015] [error] Unable to configure RSA server private key [Tue Jun 23 02:05:52 2015] [error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch The above is an accurate description of what is wrong. In our case the client made a simple mistake of thinking the localhost.crt and localhost.key (default key locations for Apache SSL in Centos) were in the same directory but they we........
  • htaccess modrewrite query string to another URL howto


    This example is based on Wordpress but applies to any other query string eg. http://wordpress.com/?p=55 If you want to manually redirect that p=55 to /some/other/url how do you do it? RewriteCond %{QUERY_STRING} p=55 [NC] RewriteRule .* /new-url/? [R=301,L] You can change the p=55 to whatever your query string looks like. Remember to keep the "?" at the end of the new URLunless you really want the query s........
  • Linux Kernel EDAC errors EDAC MC0: UE row 0, channel-a= 0 channel-b= 1 labels "-": NON-FATAL recoverable (Branch=0 DRAM-Bank=0 Buffer ID = 0 RDWR=Read RAS=0 CAS=0 NON-FATAL recoverable Err=0x800 (Non-Aliased Uncorrectable Patrol Data ECC))


    I'm not sure why I'm getting these but all memory modules are the exact same and all passed memtest successfully although they are ECC. I've heard that ECC RAM can't be tested as well and the kernel seems to indicate they are non-fatl recoverable errors. I wonder if the BIOS has aggressive RAM timing or maybe the controller or motherboard is bad. [ 12.716515] EDAC MC: Ver: 2.1.0 [ 12.717771] EDAC MC0: Giving out device to........
  • How to install grub on virtio KVM with Linux


    I messed up the bootloader by accident on a standard Centos 6.3 install because I turned the /dev/vda1 boot partition into an mdadm raid 1. This was all done correctly aside from one point Ididn't realize was an issue metadata=00.90 is the only thing that will allow you to boot (otherwise grub won't work and you won't boot). So the next step is rescue mode from a CD right? The problem you will find is that grub does not detect your hard drives, this is Ibelieve is be........
  • NS_ERROR_FAILURE (0x80004005) The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.


    The solution is to run '/etc/init.d/vboxdrv setup' and sometimes happens when upgrading VBox and the kernel modules don't get upgraded with it. Sometimes the above doesn't work until you reboot because sometimes other unknown processes (even the file manager possibly) may be locking the old module from being unloaded. Failed to open a session for the virtual machine XP. The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.........
  • Directadmin compile error solution cc: Internal error: Killed (program cc1)


    cc: Internal error: Killed (program cc1) Please submit a full bug report. See for instructions. make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1 make: *** Waiting for unfinished jobs.... Stopping crond: ........
  • .htaccess mod_rewrite preserve access to custom query string solution


    I struggled with this for awhile because sometimes you have rewritten URLs that you want to pass a query string but most of the info and examples do not support this. Take a typical example like this: RewriteRule ^(.*)-(.*)-(.*) /?module=$3&id=$2 You need to add the QSA flag to make it work like below: RewriteRule ^(.*)-(.*)-(.*) /?module=$3&id=$2 [QSA] The QSA preserves the original query string but also appends it wit........
  • CPanel Link to all of the command line options


    CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting.  I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts. So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........
  • phpBB create new email hash manually when modifying or adding user manually directly through MySQL


    Many may ask why would you need to do this? When upgrading from phpBB 2 to 3 the conversion does not keep the admin user you create. If your old admin user has an email address associated that no longer works or is accessible this makes it impossible to reset the admin password. Some may just say "I'll just manually edit the e-mail address" but it won't work and phpBB will fail to find that user if you don't update the "user_email_hash" field but how do........
  • drbd 8.3 hard drive failure recovery example


    drbd 8.3 hard drive failure recovery drbdadm attach r0 DRBD module version: 8.3.10 userland version: 8.3.8 you should upgrade your drbd tools! 0: Failure: (119) No valid meta-data signature found. ==> Use 'drbdadm create-md res' to initialize meta-data area. ........
  • LVM Tutorial how to create a Physical Volume (PV), Volume Group (vg), and a Logical Volume (LV) within it


    # first we need a physical volume which we use the pvcreate tool to create # I create mine on /dev/sdb3 pvcreate /dev/sdb3 dev_is_mpath: failed to get device for 8:19 Physical volume "/dev/sdb3" successfully created # pvdisplay shows the newly created volume pvdisplay "/dev/sdb3" is a new physical volume of "1.35 TiB" --- NEW Physical volume --- PV N........
  • Howto Convert Xen Image to KVM


    #count=10000 makes an image of 10000MB make sure your image is at least the same as your existing dd if=/dev/zero of=yourimage.img bs=1M count=10000 # losetup -fv newimage.raw # fdisk -cu /dev/loop0 # kpartx -a /dev/loop0 # dd if= of=/dev/mapper/loop0p1 # e2fsck -f /dev/mapper/loop0p1 # resize2fs /dev/mapper/loop0p1 # a lot of guides tell you to edit /etc/fst........
  • "Detecting hardware, please wait..." Ubuntu Install Error Solution


    "Detecting hardware, please wait..." Solution This occurs if you are installing with low RAM such as 128MB Bump it up at least to 512MB for the install........
  • lvm how to resize and extend a volume


    lvextend -L +10G /dev/kvmvm/w2k8r2evalstandard Extending logical volume w2k8r2evalstandard to 20.00 GiB Logical volume w2k8r2evalstandard successfully resized The above adds 10GB to the logical volume. Of course you must resize the filesystem using other tools to take advantage of the space.........
  • OpenVZ mismatched kernel and dev when compiling.


    ./configure ./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory Error: kernel version not found. Please make sure your kernel is configured. dr-xr-xr-x. 4 root root 4096 Feb 21 06:13 .. lrwxrwxrwx 1 root root 45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25 drwxr-xr-x 2 root root 4096 Feb 12 20........
  • nf_conntrack: table full, dropping packet solution


    nf_conntrack: table full, dropping packet The above in some cases I've seen is a sign of a DOS attack or can occur if users are using services like torrenting, proxy, VPNetc... Do not take it lightly as the above can knock a server offline if the table becomes full and I've also seen full crashes and kernel panics shortly after. ........
  • yum error installing php solution - exclude php from being installed from third party repos


    Error: Package: php-Monolog-dynamo-1.7.0-1.el6.noarch (epel) Requires: php-aws-sdk Error: php-pecl-zendopcache conflicts with 1:php-eaccelerator-0.9.6.1-1.el6.x86_64 Error: php-xcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64 Error: php-pecl-zendopcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64 Error: Package: php-horde-Horde-Vfs-2.1.2-2.el6.noarch (epel) &n........
  • Howto edit/rotate Samsung/Android Videos in mencoder solution


    Movie-Aspect is undefined - no prescaling applied. videocodec: libavcodec (720x1280 fourcc=34504d46 [FMP4]) [mpeg4 @ 0x2c91c00] timebase not supported by mpeg 4 standard Could not open codec. FATAL: Cannot initialize video driver. That is the error I would get, I thought it was a codec error something else. By fluke Isaw something about ffmpeg where someone recommended manually telling it to the "fps" and it worked.........
  • [emerg] (28)No space left on device: Couldn't create accept lock (/etc/httpd/logs/accept.lock.15449) (5) solution


    [Wed Jan 08 18:50:07 2014] [emerg] (28)No space left on device: Couldn't create accept lock (/etc/httpd/logs/accept.lock.15449) (5) This may happen when trying to restart Apache and you find it dies right after starting and check /var/log/httpd/error_logs. What is the cause of this? You could be out of disk space (if you're not then see #2 and below) You're out of Semaphores, you need to kill all the old ones.........
  • Howto Execute PHP from within an HTML or other file with an htaccess file on Apache


    Add this to a new ".htaccess" file inside the directory where the .html resides: AddType application/x-httpd-php .php .html........
  • [Hardware Error]: CPU:0 MC4_STATUS[-|CE|MiscV|-|AddrV|CECC]: 0x9c054c84011c011b [Hardware Error]: cache level: L3/GEN, tx: GEN, mem-tx: RD [Hardware Error]: Northbridge Error (node 0): L3 data cache ECC error.


    This server has been running for weeks without issue, it's currently only using 1 of 2 CPUs as it is running in the office as a test bed (mainly due to the handle 12 bay storage/great for testing HDDs). The errors below seem to mainly be from AMD CPUs, it's only happened a single time and in the days since Igot that error it hasn't occurrred. Interestingly enough /proc/cpuinfo still shows all 4 cores of the CPU (Opteron 2373 Quadcore HE) and the functionality doesn't seem........
  • htaccess allow only certain IPs howto


    order deny,allow deny from all allow from your.ip.here ........
  • CPanel Log File Locations for access_log,error_log, mysql


    All Errors (CPanel does not report by domain, but puts everything in a single log which Ithink is a bit silly and annoying): /usr/local/apache/logs/error_log Access_Logs They are found within the home directory of the site user eg.: /home/admin/access-logs/yoursite.com MySQL Logs /var/lib/mysql/yourhostname.err........
  • VBox/Virtualbox solution to NS_ERROR_CALL_FAILED error


    VBox/Virtualbox solution to NS_ERROR_CALL_FAILED error This is likely because you have 2D/3D acceleration enabled and your card doesn't support it. Eg. you switched video card drivers or video cards that did support it. The funny thing is that you CANNOT disable those options as they are "greyed" out in the VBox client GUI. The config file has to be manually changed and fixed with these options "accelerate3D="false" accelera........
  • kvm centos cannot compile error


    ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install gcc make ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install compat-gcc-* ./configure Error: Could not find alsa Make sure to have the alsa libs and headers installed. yum -y install alsa-lib-devel ./configure........
  • tar how to include hidden files solution


    tar -czf yourfile.tar.gz . The . dot is the crucial part, normally many will use * and that will exclude hidden files by default which is very undesirable as many hidden files are important such as .htaccess and conf files in your home directory etc.. It seems the default behavior of tar should be the opposite but these are all very old tools.........
  • Show Directory/File Listing in httpd/Apache Howto with htaccess


    Add this to htaccess: Options +Indexes After that people will be able to browse files and directories of your site.........
  • CPanel suhosin install failed


    /scripts/phpextensionmgr install PHPSuHosin Updating md5sum list Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)... Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........
  • htaccess block IPs while RewriteEngine/modrewrite is enabled solution


    Istruggled with this for awhile because the normal setup won't work if modrewrite is being used: ORDER ALLOW, DENY So the solution is something like this: order allow,deny deny from 12.43.12.0/24 allow from all ........
  • Linux create htaccess file with username and password


    htpasswd -b -c filename username "password" -b = take the password that we specify in the command (don't prompt for it) -c = create the filename username=username password=password (I use quotes because it breaks if you use special characters)........
  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........
  • Dell Perc 6/i Restore BIOS/Bricked Solution Guide Howto


    I bricked one of my cards by following a guide from UNRAID. Step #1 from them wipes out the BIOS, but guess what? The step where you restore the BIOS should have been done first, which is sas2flash but no version supports or is able to find my Perc 6/i. So now I'm a bit stuck. I tried using megarec but it's funny that it can wipe the BIOS but can't forcefully reload it: megarec -writesbr 0 mpt2sas.rom Supports 1078 control........
  • Dell Perci 6/i Firmware Upgrade Guide Tutorial


    One thing to remember is that you need MegaCli to do the flashing. You also need the correct file,I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli(they were really the wrong version). I have an external PCI-E Dell 6 Perc/I butI chose images from the 'Integrated" on motherboard version as it was allI could find. They are different, and below is my first time finding success.........
  • Dell Perc 6/i cannot downgrade


    I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally. I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN --2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN Resolvi........
  • WHMCS CC Encryption Hash


    It is stored in the "configuration.php" file of all places which is annoying andI get questons like this at worke each day.........
  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
  • pxe-32 tftp open timeout


    pxe-32 tftp open timeout The solution was to enable tftp in xinetd with "chkconfig tftp on". See the troubleshooting below: chkconfig --list NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off&n........
  • CPanel domain not working properly: http://vps.thedomain.com/domainnotknown.html Solution


    The Cause Basically it's usually because your Cpanel has new IPs and the old IPs it knows are no longer available/working/valid. The solution is to change the site's IP but you may run into issues for various reasons. Here is what I encountered below. It redirects there even though public_html is empty and doesn't have any index or htaccess redirect. --- This issue happened after a CPanel migration, the site is bein........
  • Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO


    I'm using ecryptfs and was suddenly unable to access or even ls my home directory (but every subfolder is accessible). It just hangs and throws this message in messages/dmesg: Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO I read somewhere that perhaps some file or folder is owned by root somehow, sure enough there are some and sudoing to root allows me to........
  • mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142) - Solution


    mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142) One of my clients almost found out the hard way, here is an unlikely situation that happened. 1.) Years ago the client had another VPS to which they backed up a BLOG nightly to an .sql file, what they forgot is that the file also contained all databases (they used the --all-databases option but forgot). So imagi........
  • Country List Names in HTML Select From


    This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others: Choose CountryCanadaJapanUnited StatesUnited KingdomAfghanistan........
  • postfix/dovecot Sent emails missing sometimes


    On occassion and from a variety of networks and clients, Sent messages don't get saved. I'm wondering if these log messages could be why: May 3 14:16:39 mail.box postfix/smtpd[5195]: connect from 192.168.1.58 May 3 14:16:39 mail.box postfix/smtpd[5195]: SSL_accept error from 192.168.1.58: -1 May 3 14:16:39 mail.box postfix/smtpd[5195]: lost connection after CONNECT from 192.168.1.58 May 3 14:16:39 mail.box postfix/smtpd[5195]:........
  • SSH Can't Login/Hang


    Client Log OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.1.253 [192.168.1.253] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_d........
  • Directadmin Log File Locations


    This is a handy link and list of all the relevant Directadmin log files and related servers. http://help.directadmin.com/item.php?id=11 DirectAdmin: /var/log/directadmin/error.log /var/log/directadmin/errortaskq.log /var/log/directadmin/system.log /var/log/directadmin/security.log Apache:........
  • How to install GRUB to the MBR of a disk image.


    cat | grub --device-map=/dev/null Now pay close to the attention of the beginning. Type: "device (hd0) VPS.img" this is telling what hd0 will be to GRUB and we're telling it the disk image file "VPS.img" in the current directory is hd0, you can specify alternate paths and image names of course. GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-li........
  • KVM Windows 7 won't boot Virtual Machine/VM after install solution


    This seems to be common for some reason when trying to run Windows 7 under KVM and 7 has always had strange issues with KVM. What happens for me is after the install it simply won't boot, it stays on the POST screen and does nothing. For some reason it appears the boot sector either doesn't get installed or gets corrupted with KVM. The solution is to boot the install disc for Windows 7 and reinstall the windows MBR into the boot sector: 1. Boot t........
  • postfix how to send to multiple recipients default limit of 1000


    The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.5.3 Error: too many recipients. We set this in main.cf: smtpd_client_recipient_rate_limit=0 We didn't specify it before and the default is said to be 0/unlimited and it still didn't change anything.........
  • Samsung Galaxy Note Upgrade to ICS 4.0 microSDHC card not detected/dataloss after upgrading - possible solutions


    I backed up everything in the /mnt/sd_card directory thinking that some dataloss could occur for some reason but purposely left my microSDHC unbacked up thinking that "it won't touch that since it's external" and Samsung's and other manufacturers website even say this (that it won't be affected and not to worry etc). Apparently I was wrong, my microSD was "undetected" and asked to be formatted after the upgrade (there goes 3-months worth of family photos). No........
  • Joomla Error - JFolder::create: Could not create directory


    JFolder::create: Could not create directory Plugin Install: Failed to create directory: This can occur when trying to upload content or when installing themes/templates. It's usually not a permissions issue per say but doing a 777 (which is very insecure) will fix it. But the real problem solution is that the owner of the files is different than the owner of the Apache process/server. Eg. if your Apache is running as user "apache........
  • Debian UUID not working


    Neither the blkid or the UUID internal to mdadm work to automount for some reason in Debian partprobe doesn't work but was a good suggestion from: http://pato.dudits.net/2008/11/03/special-device-uuidxxxxxxxxxxxxxxxx-does-not-exist-especially-with-lvm mount: special device /dev/disk/by-uuid/431b9b96-29e8f298-e89bd504-7065bddd does not exist mdadm -D /dev/md_d12 mdadm: metadata format 00.90 unknown, ignored. /dev/md_d12: &nb........
  • Firefox 11 solution for hidden tabs to the right


    After about 15 tabs I believe, they become hidden on the right side and are accessible only by furiously clicking the "right arrow" and even then it takes forever and honestly this hidden tab feature seems to slow down everything. If you enter "about:config" in your browser without the quotes just set this value to get rid of this annoying (one of many new) feature from Firefox (set it to false and restart your browser): services.sync.prefs.sync.brows........
  • pcnet32: eth0: transmit timed out, status 97fb, resetting - NIC card problem solution


    I've encountered this problem before and I believe it may affect other drivers (I could test but I don't have time). This was happening on my custom Linux system with the pcnet32 driver. pcnet32: eth0: transmit timed out, status 97fb, resetting (and some other kernel module tracing in dmesg) Basically it means the card is connected (it shows connected in full duplex etc.. and recognized if the cable is disconnected too) but no packets can be sent or received........
  • Asus VE247H 23.7" Inch LCD/LED Backlit Monitor Dead/Stuck Pixel Policy Complaint


    I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen. I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........
  • Linux Ubuntu Nvidia GT430 Lockups/Errors/Freezes NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context


    I'm running Ubuntu 10.10 with Asus NVIDIA GT430 2.6.35-32-generic-pae #65-Ubuntu SMP Tue Jan 24 14:06:16 UTC 2012 i686 GNU/Linux Nvidia binary driver: 260.19.06 The screen sometimes completely freezes and locks up or everything starts going very slow: [1903398.100007] NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context [1903402.373210] NVRM: Xid (0001:00): 53, CMDre 00000000 00000080 00000000 00000005 00........
  • What's Needed To Fix Linux


    I really am a Linux fan but my comments here may not show it. Although I'm quite familiar with Linux CLI to administer servers, I find Linux GUI OS's like Ubuntu at times very clunky. This is partially because there's no such thing as a "self-made" Linux from scratch where the UIwas designed by a single team. Linux is made up of several different projects that are generally completely separate and this lack of integratiion is a key issue that makes things f........
  • OpenVPN don't use bridgestart.sh or bridge at all use iptables


    I used the suggested script to bridge from OpenVPN and it took my client's server off-line! Don't ever use their "sample" scripts if you don't have another way of accessing the server than SSH. I actually found it easier to use iptables to tell it to route IPs based on a certain subnet to route through eth0: iptables -t nat -A POSTROUTING -s 192.168.200.0/24 -o eth0 -j MASQUERADE Replace "192.168.200.0/24" with your subnet of cour........
  • Linux Kernel Panic Messages - Symptoms of bad RAM module/stick


    These were caused by a bad stick of Corsair RAM [] free_hot_cold_page+0xfc/0x150 [] __pagevec_free+0x14/0x1a [] release_pages+0x127/0x12f [] __pagevec_release+0x15/0x1d [] __invalid_mapping_pages+0x120/0x156 [........
  • samba/smbd connection to share problems and solutions


    I'll start by showing some problems in the logs: [2011/08/07 16:22:06, 0] param/loadparm.c:8569(process_usershare_file) process_usershare_file: stat of /var/lib/samba/usershares/movie failed. Permission denied [2011/08/07 16:22:06, 1] smbd/service.c:676(make_connection_snum) create_connection_server_info failed: NT_STATUS_ACCESS_DENIED That means you don't have permission to access the fi........
  • How to view UDP and other protocol connections?


    netstat is weak and can't show udp connections and most other protocols, use "ss" which is what netstat should have been: The "-u" switch stands for udp, here's a list of other options: Usage: ss [ OPTIONS ] ss [ OPTIONS ] [ FILTER ] -h, --help this message -V, --version output ver........
  • Linux Out of Memory OOM Object Killer Solution "Out of memory: kill process 1955 (sshd) score 81 or a child"


    I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM. I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives? Also no swap space was ever used! cat /proc/s........
  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
  • Openvz CPT ERR: cc4c0800,28000 :Unknown image version: 304. Can't restore.


    CPT ERR: cc4c0800,28000 :Unknown image version: 304. Can't restore. This happens when you live migrate between OpenVZ servers with different kernels running, at least significantly different by date. There is no solution except to make sure you're running the same kernels on all machines, or at least not kernels that are much older or different (this is just a guess though, you should ensure all kernels are the same).........
  • Openvz YUM Error Solution to "[Errno -1] Metadata file does not match checksum Trying other mirror."


    It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work. I only get this error with the openvz.repo and not others such as Centos-Base.repo With my other server it works normally: ================ Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........
  • GRUB Solution to error "Error 6: Mismatched or corrupt version of stage1/stage2"


    GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.] grub> root (hd1,0) Filesystem type is ext2fs, partition type 0xfd grub> setup........
  • How to recover from dead DRBD partition/hard drive in two simple commands


    This assumes that you've at least created the correct partition for your DRBD already. Notice that I am "diskless", that's because either your DRBD partition doesn't exist/has been renamed (eg. sdb becomes sda when sdb dies and you reboot) or because that drive is really actually dead/gone. *If you need to permanently change the partition/device for your resource be sure to edit /etc/drbd.conf on both hosts and reload the config. (replace r0 with........
  • Kernel/make compilation time and how to improve compile times/compile the Linux kernel faster without hardware upgrades


    I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though. There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........
  • Kernel linux-2.6.39 In file included from drivers/block/cciss.c:1015: include/asm-generic/pci-dma-compat.h: In function `cmd_special_free': drivers/block/cciss.c:196: sorry, unimplemented: inlining failed in call to 'cciss_tag_discard_error_bits': fu


    In file included from drivers/block/cciss.c:1015: include/asm-generic/pci-dma-compat.h: In function `cmd_special_free': drivers/block/cciss.c:196: sorry, unimplemented: inlining failed in call to 'cciss_tag_discard_error_bits': function body not available include/asm-generic/pci-dma-compat.h:25: sorry, unimplemented: called from here make[2]: *** [drivers/block/cciss.o] Error 1 make[1]: *** [drivers/block] Error 2 make: *** [drivers] Error 2........
  • Apache High CPU Usage Enable Mod_Status Guide Solution - Find Cause of High CPU Usage Script/Domain


    mod_status is a great way to track down the source of high CPU usage and to find what vhost/script is the cause of it. It gives you a live view of bandwith usage, CPU usage, and memory usage broken down by domain/vhost and script/URI. Enable mod_status vi /etc/httpd/conf/httpd.conf ExtendedStatus On SetHandler server-status Order Deny,Allow Deny from all All........
  • vnstat setup guide/tutorial


    yum -y install vnstat chown nobody.nobody -R /var/lib/vnstat/ #replace venet0 below with your desired interface sudo -u nobody vnstat -u -i venet0 #edit: vi /etc/sysconfig/vnstat #VNSTAT_OPTIONS="-i venet0" # only use the sed below if you are using venet0 instead of eth0 or replace accordingly sed -i 's/eth0/venet0/g' /etc/sysconfig/vnstat [root@monitor]# yum install vn........
  • htaccess modrewrite problem with rewriting url with- dashes solution


    I was getting frustrated with trying to write a simple URL like this: /example-withdash I used the htaccess code like this: Rewriterule ^example-withdash$ / [R=301] I also tried escaping the dash which I thought should have treated it as a literal but that didn't work either: Rewriterule ^example-withdash$ / [R=301] But it wouldn't work, apparently the "-" dash means don't substitute,........
  • 2011 Best Laptop - HP 15.6" Laptop featuring AMD Athlon II P340 Processor (G62-420CA)


    My mother needed a new laptop and I recommended her the same one I would have bought myself or my wife, that means the cheapest possible laptop with the most features for the money. This HP shines at this price point and one thing that made me stay away from buying more and recommending HP/Compaq was the poor battery life. Not anymore, this model has an industry leading up to 4 hours of battery life. Key Factors for Choosing It: HDMI Out........
  • Drupal 6.2 Install and how to move install to root/non-subdirectory


    drup 6.2 install $cd drupgoodinst3883/ [ drupgoodinst3883]$ ls CHANGELOG.txt cron.php index.php INSTALL.pgsql.txt INSTALL.txt MAINTAINERS.txt modules robots.txt sites update.php xmlrpc.php COPYRIGHT.txt includes INSTALL.mysql.txt install.php LICENSE.txt misc&........
  • Yahoo Mail (email) DNS Server Out Of Date Problems


    I don't expect this to be solved soon but some of Yahoo's DNS servers are out of whack. I changed the IPs of some nameservers of some domains and now most Yahoo users can't e-mail to those domains! As you can see below by the "No MX or A records for mychangedomain.com", now Yahoo's DNS/mailserver DNS cache is wrong. You would think they would at least have cached the old incorrect records, but instead for some reason their DNS cache has no entry and doesn't seem........
  • SPAMASSASSIN Enable Pyzor and DCC


    *Remember to restart spamassassin after all of this. DCC wget http://www.dcc-servers.net/dcc/source/dcc.tar.Z tar -zxvf dcc.tar.Z cd dcc-1.3.138/ ./configure;make;make install #enable DCC, uncomment the line that disables it near the top vi /etc/mail/spamassassin/v310.pre pyzor wget http://sourceforge.net/projects/pyzor/files/pyzor/0.5.0/pyzor-0.5.0.tar.gz/down........
  • Enable SPAMASSASSIN on Postfix in 5 minutes


    Centos 5 Postfix and SPAMASSASSIN Tutorial yum install spamassassin chkconfig spamassassin on vi /etc/mail/spamassassin/local.cf ############## #required_hits 5 #report_safe 0 #rewrite_header Subject [SPAM] #5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives require........
  • Directadmin DA Install Guide


    yum -y install openssl* gcc-c++ gcc flex g++ make;wget http://www.directadmin.com/setup.sh;chmod +x ./setup.sh;./setup.sh #enable SSL /usr/bin/openssl req -x509 -newkey rsa:1024 -keyout /usr/local/directadmin/conf/cakey.pem -out /usr/local/directadmin/conf/cacert.pem -days 9999 -nodes chown diradmin:diradmin /usr/local/directadmin/conf/cakey.pem chmod 400 /usr/local/directadmin/conf/cakey.pem sed -i "s/SSL=0/SSL=1/g" /usr/local/dire........
  • Plesk Get List of E-mail Users & Aliases


    When migrating away from Plesk I couldn't figure out an easy way to get a straight list of all e-mails, but here is where I found the solution: http://nakuls77.wordpress.com/2008/08/30/details-of-email-ftp-database-users-from-psa-database/ mysql> SELECT mail.mail_name, accounts.password, domains.name FROM mail, accounts, domains WHERE domains.id=mail.dom_id AND mail.account_id=accounts.id; mysql> SELECT CONCAT(mail.mail_name,’@’,domains.name) AS Em........
  • OpenOffice Calc SUM function not working Solution - Result is always 0/apostrophe appears in front of all numbers.


    I right clicked all applicable cells and chose "number" but that's enough. I notice when I click the cell there is an invisible ' in front of the number: '33.64 Calc imported my CSV and decided to add a ' in front of the numeric currency values!!!*Actually the problem occurs when you right click the cells and change the type from text to number, no matter what format you choose. If I change it to be currency i........
  • Thunderbird copy filters to other accounts


    cp msgFilterRules.dat /other/mail/folder edit msgFilterRules.dat change all instances of your old mailbox: actionValue="mailbox://joes@mail.server.com/name" to: actionValue="imap://joes%40server.com@mail.server.com/INBOX" sed s/'actionValue="mailbox:joes@mail.server.com'/imap://joes%40server.com@mail.server.com/g msgFilterRules.dat-........
  • Postfix/Any Email Server check for Open Relay


    The first thing you need to remember is not to check from the same host/server itself. This is a silly mistake I made, the reason is that many mailservers and especially postfix are configured to allow relaying from the localhost/same host. If you do that you'll get a false positive. *Make sure you test from another host/system than the mail server itself! telnet yourmailserverhost.com 25 220 Courier (FreeBS........
  • Apache Forbidden You don't have permission to access / on this server.


    Forbidden You don't have permission to access / on this server. [Sun Jan 23 15:28:12 2011] [crit] [client 96.44.31.12] (13)Permission denied: /www/vhosts/domain.com/httpdocs/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable Solution I've done a chmod 755 .htaccess and index.php and restarted Apache That wasn't the only issue, the issue was the httpdocs direc........
  • tar how to include hidden files such as .htaccess when it doesn't automatically


    tar include hidden files such as .htaccess just add . to the path eg. tar -czvf tarfile.tar.gz /home/directory/.........
  • updatedb/mdadm caused a kernel panic?


    Jan 16 04:02:03 centosbox syslogd 1.4.1: restart. Jan 16 04:07:34 centosbox kernel: INFO: task updatedb:20771 blocked for more than 300 seconds. Jan 16 04:07:34 centosbox kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jan 16 04:07:34 centosbox kernel: updatedb D F78BE050 6476 20771 20766&n........
  • Ubuntu 9.04 Crash


    CPU/Kernel/MB/RAID problem? Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168] Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........
  • Installing Webmin & Enabling SSL


    Webmin Setup Centos 5: wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet [1] 24229 [2] 24230 [root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html Resolving downloads.sourceforge.net... 216.34.181.........
  • Linux Realtek Gigabit NIC huge/high latency problem after sleep?


    That is pinging to the gateway IP on the same switch, the same IP is pingable externally without any problems which makes me think the switch is fine. 64 bytes from 55.55.55.55: icmp_seq=4 ttl=255 time=1.07 ms 64 bytes from 55.55.55.55: icmp_seq=1 ttl=255 time=3536 ms 64 bytes from 55.55.55.55: icmp_seq=2 ttl=255 time=2536 ms 64 bytes from 55.55.55.55: icmp_seq=3 ttl=255 time=1536 ms 64 bytes from 55.55.55.55: icmp_seq=8 ttl=255 time=1.20 ms 64 by........
  • Cygwin and crontab backups via ssh/scp/rsync


    Install the "Editors" and "Net" groups that will give you rsync, ssh, ssh-keygen and cron. The trickiest thing that I keep forgetting about each time is you have to run "cron-config" which adds the cron service to Windows, and without doing that obviously no cron jobs will be run thus making automatic backups impossible. Warning about rsync/cygwin and using the -a archive switch. It's a good thing I caught this because it doesn't work ri........
  • Ubuntu/Debian DRBD 8.0 Setup Guide


    I've only used it on Centos, soI thought I'd make a quick Debian guide: Install the DRBD Package apt-get install drbd8-utils Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libswfdec-0.8-0 Use 'apt-get autoremove' to remove them. The following........
  • bash script count unique/dupllicate lines in a file


    For many reasons you may be dealing with a standard text file and you want to know if there are any duplicate lines: Here's how you do it: cat filename|uniq -c The "uniq -c" program counts how many time each line occurs.........
  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........
  • WD EARS/Green 2TB Cannot Disable Power Saving/Head Parking with hdparm


    hdparm -B 255 /dev/sdb /dev/sdb: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well). -S set standby (spindown) timeout hdparm -S 251 /dev/sda /dev/sda: setti........
  • yum error with some versions of Centos Refusing to automatically import keys when running unattended. Use "-y" to override.


    Refusing to automatically import keys when running unattended. Use "-y" to override. When using echo y|yum install gcc Fix with rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*........
  • PHP Email Attachment Corrupt Solution


    I couldn't figure out why this wouldn't work, a test script in the root of my htdocs folder worked fine. Within some subdirectories the same code would produce different base64 results but I didn't know hwy. Archive: /tmp/archive.zip Zip file size: 6888 bytes, number of entries: 92 error [/tmp/archive.zip]: missing 242827681 bytes in zipfile (attempting to process anyway) error [/tmp/archive.zip]: attempt........
  • PHP CURL SSL won't work or connect


    I spent so much time debugging this, most sites don't tell you a very important option to use with CURL and you will only find out this is the problem by running the PHP script from the command line you get the following output that shows the issue (I don't see any way to get this output from Apache itself). * About to connect() to ip.ip.ip.ip port 25000 * Trying ip.ip.ip.ip... * connected * Connected to ip.ip.ip.ip (ip.ip.ip.ip) port 25000 * succes........
  • Revert to GRUB 0.97/1 instead of GRUB2


    had trouble trying to revert Ubuntu 10.04 LTS from grub2, won't boot mdraid and did not even install mdadm during the installation! I have tried moving back to GRUB 0.97 backed up original /boot and then copied /boot from an old Debian install. Modified device.map and menu.lst and put the appropriate kernels and initrd for Ubuntu back in /boot I ran grub: root (hd0,1) grub> setup (hd0) Checking if "/boot/grub/stage1........
  • DRBD WFConnection Problem/Solution


    This has stumped me a few times because I keep forgetting that Centos 5.5 comes with a default iptables configuration that ends up blocking DRBD traffic,I tried all the normal things and couldn't understand why I couldn't make my normal DRBD config work. So if you have WFConnection problems and have tried the normal "mailing list" fixes, check your firewall status first! Both Nodes Say the Following: version: 8.3.8 (api:88/prot........
  • VirtualBox Error Failed to start the virtual machine Centos 5.5 Mirror. Medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' is not accessible. UUID {a1a9fad7-0402-4867-b8f3-39fb49454bc5} of the medium '/home/testuser/.VirtualBox/HardD


    Virtualbox Error I tried to copy a .vdi of one container to use in another one, basically to clone instead of having to install the OS again. Failed to start the virtual machine Centos 5.5 Mirror. Medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' is not accessible. UUID {a1a9fad7-0402-4867-b8f3-39fb49454bc5} of the medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' does not match the value {4945a0e8-0ed5-4736-9088-bcaf........
  • Installing Virtualbox on Centos 5.5


    wget http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm rpm -i http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm error: Failed dependencies: libGLU.so.1 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386 libSDL-1.2.so.0 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386 libXmu.so.6 is needed b........
  • Ubuntu 10.04 Linux is still not ready for the Desktop world


    I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD. Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer). I'll........
  • GNOME/Ubuntu how to navigate without a keyboard


    The most basic is the start menu, which is accessed with Alt+F1........
  • Local policy does not permit you to log on interactively. - Solution/Fix


    For a standalone system the solution is simple, just use the same version of Windows a copy a good version of: C:windowsSecurityDatabasesecedit.sdb from another computer. Then you should be able to login again without getting the nasty message "Local policy does not permit you to log on interactively." Of course you will probably need a way of accessing the filesystem off-line in order to get to it such as a Linux boot disc. Some........
  • mencoder Linux CLI video editing how to encode video file into xvid and split by time into multiple parts


    Mencoder is great, you can throw anything at it, including video files from your camera and have it encode into xvid or almost any other format. In my case I took 640x480 video from my Canon and reduced the size by 1/3 with the options below (there are many other options that you can read about in the manual but I like to keep it simple). Mencoder Encode mencoder -ovc xvid -oac mp3lame -xvidencopts fixed_quant=4 -o ........
  • Realtek r8169 1gbit/1000mbit NIC/Ethernet Goes Down/Halts on Large File Transfer/Heavy Network Usage


    This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason? [655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........
  • RAID 5 doomed in 2009?


    http://www.tomshardware.com/news/RAID-5-Doomed-2009,6525.html I found this article interesting, it basically says that with 2TB hard drives or larger sizes, you are more likely to encounter an unrecoverable read error. But is this just another Y2K doomsday? Don't HDD's have enough advanced hardware ECC error and read recovery to prevent this from happening? I'm almost tempted to build a 3 x........
  • FUSE/Curlftpfs mount ftp account as drive partition in Linux


    This is a great way to use your ftp server space, for example on your web hosting account (althoughI believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect. Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc.. Name curlftpfs - mount a ftp host as a local directory Synopsis........
  • Use rcconf to edit startup/init.d/init scripts on Debian/Ubuntu based distributions


    I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL. Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you. apt-get install rcconf Reading package lists... Done Building dependency tree Reading state information... Done........
  • Fix Slow 2D Graphics Xorg.conf Ubuntu/Debian/Mandriva Linux


    I'm using Ubuntu 8.04 but anyone using older kernels will find this may apply to them. My Intel graphics are very slow with the default Xorg settings but by using "EXA" acceleration, scrolling down windows of text becomes pretty snappy. Just edit /etc/X11/xorg.conf Section "Device" Identifier "Configured Video Device" &nb........
  • CPanel Solution for Error Missing HOST Config Line in /etc/wwwacct.conf, please reconfigure with Edit Setup.


    Edit /etc/wwwacct.conf Then add/edit the HOST line to add your hostname. eg: HOST yourcpanelserver.com........
  • Debian 5.04 RAID 1 mdadm boot problem GRUB error


    I successfully created a single RAID 1 partition which includes /boot inside it and my root directory through the Debian installer. It said GRUB installed successfully but when I try booting the OS it seems GRUB can't read anything. When trying to boot from GRUB GRUB Loading stage 1.5. GRUB loading, please wait... Error 2 I get "Error 2" when trying to boot Debian. I also notice from a LiveCD that........
  • Centos 5.5 RAID 1 boot issue


    I installed 5.5 with a 300GB RAID 1 partition (boot is also on this partition). It booted up fine the first few times until after I used a Live CD and accessed the array, and it became named /dev/md127 for some reason. Now whenI boot into CentOS I get a kernel panic and different errors, once I got "invalid superblock", even though the array is fine (it didn't happen again, probably because I was sure to dismount and stop the mdadm array properly). Here's what........
  • Compile PHP 5.3.2 on Centos 5 and CPanel/WHM because of error - Fatal error: Call to > undefined function imagecreatefromjpeg()


    This function and others may not work with the stock PHPinstall on Centos/CPanel: Fatal error: Call to > undefined function imagecreatefromjpeg() Even with libjpeg-devel installed it won't work because PHP was not compiled with jpeg support, so we have to do the dirty work ourselves :) Here is the command/yum's I did to install missing libraries for PHP that configure will complain about (yes it is a one by one process). yum install bzip2-........
  • Canel Default VHOST DocumentRoot/Contents Directory is /usr/local/apache/htdocs


    This can be very annoying and CPanel doesn't seem to document it, or it's not found or made as obvious as it should be. It's always funny when I find it more difficult to work with a control panel than to do everytihng manually without CPanel or even Plesk. So once again, the default serve path for contents is: /usr/local/apache/htdocs and this is especially applicable when accessing Apache by just an IP which is unbound to any domain at this point.........
  • Choose Which GCC Version to compile with via CC environment variable.


    It's very common to have multiple GCC versions for different reasons, as annoying as it is. Some newer/older programs only compile properly or at all on specific versions. You can export the following variable CC: export CC=gcc-4.1 Replace gcc-4.1 with the filename of the gcc you want eg. gcc-99........
  • Linux 2.6.33.3 Kernel Error CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function b


    CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function body not available drivers/message/fusion/mptsas.c:462: sorry, unimplemented: called from here make[3]: *** [drivers/message/fusion/mptsas.o] Error 1 make[2]: *** [drivers/message/fusion] Error 2 mak........
  • rsync halted froze Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync)


    Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync) I was surprised to see this in my dmesg whenmy rsync backup suddenly stalled/stopped. This system has 3 gigs of RAM and lots of free memory so I don't understand what is happening. rsync invoked oom-killer: gfp_mask=0x200d2, order=0, oomkilladj=0 Pid: 7600, comm: rsync Not tainted 2.6.24.2 #83 [] oom_kill_pr........
  • rsync ERROR: sdb2/backup.r18 failed verification -- update retained.


    ERROR: sdb2/backup.r18 failed verification -- update retained. This happened when Iwas rsyncing a dying hard drive, a lot of people seem to report this as an error with rsync itself but I don't think rsync is the issue at all. I know the source hard drive was bad, it was having all kinds of timeout, seek, hardware ECC recovered and reset errors. The only time something else could be the problem is if the data is being corrupted in transit, perhaps through........
  • Seagate Drive 500GB Drive Dying


    This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART. Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device........
  • Seagate 7200.11 firmware defect in 500GB, 1000GB (1TB) and 1500GB (1.5TB) Hard Drives


    Seagate Inventory/Firmware Check I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate. *Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate! Seagate Inventory/Firm........
  • Linux AHCI Hotswap Tips - Remember To Reread The Partition Table WITHOUT rebooting


    From the package "parted" you can use the command "partprobe" to re-read the partition table. I really hate rebooting, and that's what Iloved to hear about AHCI motherboards, that they allow hotswap so you don't have to reboot. But that's only as good as the OS, if the OS does not reload the partition table you won't be able to do anything with that new drive you attached without rebooting. Yes, even without re-reading the partiton table Linux will........
  • Convert HDD/Hard Drive Partition(s) into non-RAID into RAID 1 using existing data without data loss and without reformatting.


    Before we start I take no responsibility for this, you should have a backup and if you make a mistake during this process you could wipe out all of your data. So backup somewhere else before starting this as a precaution, or make sure it's data you could afford to lose. The RAID 1 Setup (Hardware Wise) I've already setup my 2 x 1TB (Seagate) drives with identical partitions, make sure your new hard drive (the empty one) is setup like your curr........
  • Linux EXT3 16GB-17GB maximum filesize issue solved/how to fix


    I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB! I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition. Here is what tune2fs tol........
  • Picking an FTPD (vsftpd) Server in Linux Centos/Debian


    I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find. yum search ftp Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: ftp-stud.fht-esslingen.de * base: mirrors.netdna.com * updates: updates.interworx.info * addons: yum.singlehop.com * extras: mirrors.netdna.com rpmforge........
  • Compaq V2405CA Laptop - Unixbench Performance Test


    Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics. # # # # # # # ##### ###### # # #### # # # # ## # # # #&nb........
  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
  • rsync bash script


    rsync bash script [code:1:722d8a25c1]#!/bin/bash # config --------------------------------- # two methods # from = receive data from another server # to = send data to another server rsync_method=from rsync_ip='192.168.5.18' local_dir='/home/backupguy/backups' remote_dir='/home/backup' free_space_bin='/home/backups/freediskspace.sh' # config end ------------------------------ if [ '$rsync_me........
  • JavaScript get valued of selected <select> drop down l


    JavaScript get valued of selected drop down l [code:1:4be190f44a]Package = OrderForm.package.options[OrderForm.package.selectedIndex].value;[/code:1:4be190f44a] OrderForm = Name of HTML form the SELECT is inside package = Name of SELECT element eg. JavaScript says form name is not defined even though it is I've integrated this into my design and I got an error saying the Form Name i........
  • Centos 4.3 x64 & VMWare Server Beta


    Centos 4.3 x64 & VMWare Server Beta[code:1:6d0b2c8c2f] The correct version of one or more libraries needed to run VMware Server may be missing. This is the output of ldd /usr/bin/vmware: linux-gate.so.1 => (0xffffe000) libm.so.6 => /lib/tls/libm.so.6 (0xf7fbd000) libdl.so.2 => /lib/libdl.so.2 (0xf7fb9000) libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fa7000) libX11.so.6 => not f........
  • Updated to Version 3.8 and can't login


    Updated to Version 3.8 and can't loginSSHD accepts my password but then hangs at "Last login: Wed Sep 13 21:30:02 2006 from" This occurred during a yum update after upgrading my release, installing the new kernel and rebooting. I got kicked out of sshd after seeing the following during yum update: telnet 100 % done 85/476 tux 100 % done 86/476 ntsysv 100 % done 87/476 rpmdb-redhat 94 % done 88/476........
  • /usr/bin/ld: cannot open crt1.o: No such file or directory


    /usr/bin/ld: cannot open crt1.o: No such file or directory[quote:812bec9db7]/usr/bin/ld: cannot open crt1.o: No such file or directory collect2: ld returned 1 exit status[/quote:812bec9db7] This is annoying and in my case it happened on Centos AMD 64 when compiling a 32bit program with GCC. Install glibc-devel.i386 (make sure you get the i386 version and not the native 64 bit version which is likely already installed). The joys of 3........
  • How to compile in Windows/DOS


    How to compile in Windows/DOSMingW is a free compiler project so start here: http://www.mingw.org/download.shtml#hdr2 I downloaded the core GCC compiler: http://prdownloads.sf.net/mingw/gcc-core-3.4.2-20040916-1.tar.gz?download But it's missing even the standard C runtime libraries like "stdio.h"! You may also need to add environment variables from the DOS command line. Here is a simpl........
  • Quick Tutorial On Starting A Web Site


    Quick Tutorial On Starting A Web Site[b:3cef3c01b6]Step 1.[/b:3cef3c01b6] Purchase a Domain Name (eg. yoursite.com) [b:3cef3c01b6]Step 2.[/b:3cef3c01b6] Design your site using a program such as Microsoft Frontpage or Macromedia Dreamweaver. If you are unable or unfamiliar with doing this you may want to hire a company to create your site (many of them will handle each aspect of setting up your site). [b:3cef3c01b6]Step 3.[/b:3cef3c01b6] Host your site........
  • The New Chips on the Block


    The New Chips on the BlockThe New Chips on the Block By Bruce Gain Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html 02:00 AM Jun. 13, 2005 PT We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........
  • Intel's Finnish Fetish


    Intel's Finnish FetishIntel's Finnish Fetish By Dave Mock June 13, 2005 Chipmaker Intel (NASDAQ: INTC) has successfully topped the personal computer market for decades. Breaking into related areas such as communications has been much difficult for the world's largest semiconductor maker. But a new partnership with Nokia (NYSE: NOK) could help to change that. Intel's forays into cellular-phone and home-entertaiment-device chips have........
  • PHPBB Drop All Tables


    PHPBB Drop All TablesSQL Syntax: [quote:75acd496c1]drop table phpbb_auth_access, phpbb_banlist, phpbb_categories, phpbb_config, phpbb_confirm, phpbb_disallow, phpbb_forum_prune, phpbb_forums, phpbb_groups, phpbb_posts, phpbb_posts_text, phpbb_privmsgs, phpbb_privmsgs_text, phpbb_ranks, phpbb_search_results, phpbb_search_wordlist, phpbb_search_wordmatch, phpbb_sessions, phpbb_smilies, phpbb_themes, phpbb_themes_name, phpbb_topics, phpbb_topics_watch, phpbb_user_group, p........
  • Comment lines in #htaccess


    Comment lines in #htaccessYou can create a hash '#' at the beginning of the line: eg: [quote:2d67449f2c]#[/quote:2d67449f2c]........
  • Chat MSN/ICQ/Yahoo etc.. Clients


    Chat MSN/ICQ/Yahoo etc.. ClientsText-Based: MSN - pebrot, tmsnc, ccmsn ICQ - centericq........
  • ECS K7S5A Motherboard System Take Up To 2 Minutes To Boot


    ECS K7S5A Motherboard System Take Up To 2 Minutes To BootHi guys, My motherboard is very strange. Sometimes it will take up to a few minutes to post. I have no idea it suddenly started doing this. I have tried everything and all I can figure is that it is somehow related to the USB ports possibly. Why do I say this? Because if I disconnect my scanner the problem occurs less frequently. I only have a printer hooked up to USB now and by........
  • Other Security Web Sites


    Other Security Web SitesSeveral websites actively track security issues. This list provides you with the major providers of security information on the Web. Many of these organizations also provide newsletters and mailings to announce changes or security threats: Center for Education and Research in Information Assurance and Security (CERIAS) CERIAS is an industry-sponsored center at Purdue University that is focused on technology and relate........
  • gnuCash - Alternative to Quickbooks/Quicken and other COTS accounting software.


    gnuCash is available for all main platforms, Linux/Unix, MacOS (FreeBSD anyway), and Windows. You can download gnuCash free from here. It does seem to be fairly full featured and somewhat straight forward, but like so many programs it is missing a few key features or things don't work quite right. It doesn't support importation of CSV files, which is a big minus. And the developers rather than wanting to add support have just dec........
  • Linux Kernel Compilation (Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support ) Error - drivers/net/igb/igb_main.c: In function `igb_up': make[3]: *** [drivers/net/igb/igb_main.o] Error 1


    Linux Kernel v2.6.30.3 102220 blocks CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-x86 CALL scripts/checksyscalls.sh CHK include/linux/compile.h CC drivers/net/igb/igb_main.o drivers/net/igb/igb_main.c: In function `igb_up':........
  • Enable/Disable PHP Warnings/Logs and Errors from .htaccess with Apache


    Put what you see below into your .htaccessand it will enable errors and notices. (change on to off and 1 to 0 to disable though) php_flag display_startup_errors on php_flag display_errors on php_flag html_errors on Now you'll be able to see errors and notices but this should really only be used for debugging purposes and only temporarily as it can be a security issue since errors can reveal information you wouldn't want hacker........
  • Process/Parse PHP from HTML files using .htaccess and allowoverride


    RemoveHandler .html .htmAddType application/x-httpd-php .php .htm .html Just add the above into the .htaccess file for your website. Also remember that you need to be allowed to override the Apache and this should go into the vhost for your site as shown below: # you need the AllowOverride otherwise .htaccess directives will be ignoredOptions FollowSymLinksAllowO........
  • MySQL Error "ERROR 1045 (28000): Access denied for user"


    This happened with a select statement which writes the result to an external file. I didn't remember the privilege "FILE" must be granted on *.* for this to work successfully, it wasn't actually an authentication issue as it implies since I was already in the SQL prompt and doing the query. SELECT some_id FROM sometable INTO OUTFILE '/tmp/result.txt'........
  • Openvz "Container already locked" Error Message Solution/Fix


    I didn't find any useful information that actually fixed this. My VPS was in the "Running State" and I could not stop or restart it. I kept getting "Container already locked" no matter what Idid (I tried all the suggestions in the Google results for this error). Most of the suggestions were for Windows but I only use Linux. The other solutioins also said to restart the VZ service or even the entire hostnode and this was not acceptable to me........
  • Adventures in pre-paid SIM Cards and data GPRS/Edge/3G in China with China Mobile in Shenzhen, Guangzhou, Shanghai, Beijing and other cities


    This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far: You can purchase an "M-Zone" China Mobile pre-paid SIMCard from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all. At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........
  • iPhone Enable Tethering Manually Update ipcc Carrier Settings/Update via SSH


    Everyone says there is a "manual" way of doing it and then they tell you to use iTunes, but if you're like me, you're travelling on business in a foreign country and your laptop does not have iTunes and you don't have a way of getting it and/or don't want it. For this example I'm using the provider "du" in Dubai, UAE (United Arab Emirates) but this method works for virtually all providers. The requirements in this case to truly "manually update........
  • How to avoid web content hijacking/copying/Force content to be accessed by only 1 domain name


    This is something that happens a lot and it is very dirty, as you probably know each site is hosted on a certain IP address. Sometimes a domain is hosted by a single IP address and the IP address defaults to this very same domain. This means that if someone buys domain abcd.com and enters your IP address (the one of your website) as the A record, your content will show up on their domain as if it was their own. There is an easy way to prevent this by using .htacces........
  • Tyan S2735-8M Maximum Hard Drive Limit/Not Working/Doesn't work with 1TB 1000GB hard drives


    Inever saved any of the logs, but basically no matter what OS (Linux)I used, I could not get my 1000GB hard drive to work (Seagate SATA). The BIOS recognizes the drive and fdisk -l shows the hard drive as it should. The tricky thing is that different OS's will give you different results, but don't be fooled. You can't use these larger drives for long. Iwas getting all kinds of seek/IOerrors and also messages that the port could not be read.........
  • Have an OpenVZ VPS/Linux Virtual Private Server and nothing works right?


    A VPS Server I had just wasn't working right, code that I migrated there just wasn't working. For example, it kept telling me the connection to the database was unsuccessful, halfway through iterating through results it already had. Then I realized it wasn't my code. Ichecked my /proc/user_beancounters and found this: cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt........
  • MySQL Restoring And Dumping/Backing UP MySQL Data/Tables/Databases


    Backing MySQL Databases Backing Up/Dumping All Mysql Databases To A Single File mysqldump --all-databases -u admin -p > allmysqldatabases.sql The "-all-databases" clause is pretty obvious isn't it? It means that it will backup all databases. The "-u admin" means login using the user "admin", if you h........
  • Apache Ignoring/Not processing .htaccess file


    I was getting very frustrated one day wondering why it appeared my .htaccess file was being ignored and not processed by Apache. No matter what I did it was obvious that Apache didn't care about my .htaccess file. Then I realized that the default settings must be in effect, which is that my vhost didn't explicitly allow me to override the default settings. This usually comes down to your vhost settings. Make sure you have an entry like this in your Apache vhost settings in........
  • Why Apple should thank the jailbreakers and not patch/stop the jailbreaking exploits


    First of all, the iPhone is crippled in many ways, but most of my complaints about functionality have been addressed through the jailbreak, Ican run apps in the background of my choosing, I can install a terminal, acccess my phone through SSH and SCP and so much more. It even addresses the 15 minute e-mail problem, I installed a program called "PushMod" and now set the checking time to just 1 minute. Apple should really thank the developers for this gift, it ma........
  • Weird characters in Linux putty shell


    Iused to get all kinds of weird annoying characters like "‚" during compilation with gcc especially. example: dmg2img.c:456: error: ‚BZ_OK‚ undeclared (first use in this function) dmg2img.c:471: warning: implicit declaration of function ‚BZ2_bzCompressEnd‚ dmg2img.c:482: warning: implicit declaration of function ‚BZ2_bzDecompress‚ dmg2img.c:484: error: ‚BZ_PARAM_ERROR‚ undecl........
  • Using a Mac OSX DMG Image in Windows and Converting to Standard ISO Format use dmg2iso


    The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso I'll only cover theLinux version although the Windows pre-built binary works the same way. Download dmg2iso here for free (from the author's website) It's just silly and doesn't make sense that Ubuntu doe........
  • SSH Server Slow/Lagged/Delayed Login Response


    This is really something the SSHServer developers should consider. The cause of this annoyance is because of failed DNS lookups on your IPaddress, which is especially common for many dedicated/col-located servers and also computers on internal NAT/private networks. The chances are this is the cause of your SSHSlow/Delayed Login problems. The easy solution to SSH Login Problems Edit /etc/ssh/sshd_config Add this line to disable r........
  • OCFS2 crash


    When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it. More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things. Output of /var/log/messages for OCFS2 Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........
  • Samba SMB Error - Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD


    Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD That happens when trying to use smbclient to connect to a share. The weird thing is that I can authnenticate just fine from Windows XP. It is partially my mistake, I forgot this share does have a password. I've tried authenticating with the correct user and also with "Guest" because this works in Windows. In Linux I ........
  • Latest Articles

  • Centos 7 how to save iptables rules like Centos 6
  • nfs tuning maximum amount of connections
  • qemu-kvm error "Could not initialize SDL(No available video device) - exiting"
  • Centos 7 tftpd will not work with selinux enabled
  • Debian Ubuntu Mint Howto Create Bridge (br0)
  • How To Control Interface that dhcpd server listens to on Debian based Linux like Mint and Ubuntu
  • LUKS unable to type password to unlock during boot on Debian, Ubuntu and Mint
  • Debian Ubuntu and Linux Mint Broken Kernel After Date - New Extra Module Naming Convention
  • Wordpress overwrites and wipes out custom htaccess rules and changes soluton
  • Apache htaccess and mod_rewrite how to redirect and force all URLs and visitors to the SSL / HTTPS version
  • python 3 pip cannot install mysql module
  • QEMU-KVM won't boot Windows 2016 or 2019 server on an Intel Core i3
  • Virtualbox vbox not starting
  • Bind / named not responding to queries solution
  • Linux Mint How To Set Desktop Background Image From Bash Prompt CLI
  • ImageMagick Convert PDF Not Authorized
  • ImageMagick Converted PDF to JPEG some files have a black background solution
  • Linux Mint Mate Customize the Lock screen messages and hide username and real name
  • Ubuntu/Gnome/Mint/Centos How To Take a partial screenshot
  • ssh how to verify your host key / avoid MIM attacks