• hostapd how to enable and use WPS to connect wireless devices like printers


    Edit your /etc/hostapd/hostapd.conf file like below and restart hostapd. #WPS stuff # Enable control interface for PBC/PIN entry ctrl_interface=/var/run/hostapd eap_server=1 wps_state=2 ap_setup_locked=1 wps_pin_requests=/var/run/hostapd.pin-req config_methods=label display push_button keypad #WPS model info stuff change to suit your needs device_name=USB2.0 WLAN manufacturer=ATHEROS model_name=WAP........

  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730


    This is certainly a poor design, as you can read many seasoned admins who have updated their iDRAC only to have it killed. One possible cause is not by doing all the incremental updates, doing updates from an old iDRAC to one many revisions newer is a sure way to kill things, but even then there is no guarantee based on the amount of failures. List of threads of people's dead iDRAC's:........

  • How to kill a docker swarm


    Assign way more replicas than you have of memory on all nodes and watch the Swarm crash which can easily reproduce in a small VMfor testing. root@Deb11Docker01:~# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAM........

  • docker swarm silly issues


    The error below can be caused by a gateway that is unpingable: docker swarm join --token SWMTKN-1-1kogg8da68gtb1j7ezaddowyy9s0an5s9tue758o20k18liskw-5h3f61hrrmv3u6agshvbtcklf 172.16.1.80:2377 Error response from daemon: manager stopped: can't initialize raft node: rpc error: code = Unknown desc = could not connect to prospective new cluster member using its advertised address: rpc error: code = DeadlineExceeded desc = context deadline exceeded........

  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian


    This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525. Then nvidia-modeset goes to 100% There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines. https://forums.de........

  • ImageMagick error convert solution - convert-im6.q16: cache resources exhausted


    convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244. convert-im6.q16: cache resources exhausted `/tmp/magick-27777Al6FGY7dhyKt10' @ error/cache.c/OpenPixelCache/3984. convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244. convert-im6.q16: cache resources exhausted `/tmp/magick-277772Y_-pJnMdT2r1' @ error/cache.c/OpenPixelCache/3984. convert-im6.q16: Distr........

  • File "/usr/local/lib/python3.5/dist-packages/pip/_internal/utils/entrypoints.py", line 12 f"pip{sys.version_info.major}", ^ SyntaxError: invalid syntax python pip3 error solution


    Is python3-pip pip3 not working anymore? Traceback (most recent call last): File "/usr/bin/pip3", line 11, in sys.exit(main()) File "/usr/local/lib/python3.5/dist-packages/pip/__init__.py", line 11, in main from pip._internal.utils.entrypoints import _wrapper File "/usr/local/lib/python3.5/dist-packages/pip/_interna........

  • How To Stop DNSMasq from listening on all IPs/Interfaces and allow only localhost


    Some people find it less than intuitive to do on DNSMasq and by default DNSMasq is available on 0.0.0.0 which could even be your LAN or Public IP. Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp ........

  • When is it time to leave your VPS/VDS Cloud Hosting Provider?


    When Is It Time to Leave Your VPS, VDS, and Dedicated Server Provider? Choosing the right hosting solution—be it Virtu........

  • System has not been booted with systemd as init system (PID 1). Can't operate. Failed to talk to init daemon. Ubuntu Debian Linux Solution Cannot reboot


    You are probably using some custom image or maybe this is some sort of container that didn't boot with systemd. The solution is to use "reboot -f" reboot -f This will force the system/OS/VM/container to reboot.........

  • Mint Ubuntu Linux Gnome Showing Home Directory on Desktop instead of Desktop Directory


    During a migration or other custom setup, it's possible you don't have a $HOME/Desktop and as a result the config file that controls this is set to just use your $HOME directory. This is controlled in the file: $HOME/.config/user-dirs.dirs As we can see below, Desktop, Downloads, Music and Pictures are set to $HOME. We can edit any of these as we like. # This file is written by xdg-user-dirs-update # If you want........

  • Linux how to get list of all timezones on system Ubuntu


    find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV" Africa/Addis_Ababa Africa/Abidjan Africa/Blantyre Africa/Lusaka Africa/Casablanca Africa/Libreville Africa/Asmara Africa/Bujumbura Africa/Dakar Africa/Lagos Africa/Malabo Africa/Harare Africa/Kigali........

  • configure.ac:75: error: possibly undefined macro: AC_PROG_LIBTOOL If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. solution


    configure.ac:75: error: possibly undefined macro: AC_PROG_LIBTOOL If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. autoreconf: /usr/bin/autoconf failed with exit status: 1 make: *** [/software/pixman/configure] Error 1 make: *** Deleting file `/software/pixman/configure' yum install libtool........

  • Can't exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 326. autoreconf: failed to run aclocal: No such file or directory solution


    autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --output=aclocal.m4t Can't exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 326. autoreconf: failed to run aclocal: No such file or directory make: *** [/software/pixman/configure] Error 1 Just install automake: yum install automake........

  • glib-2.0 required to compile QEMU solution


    ./configure glib-2.0 required to compile QEMU yum install glib2 glib2-devel or on Debian/Ubuntu based: apt install libglib2 libglib2-dev........

  • How To Upgrade Debian 8,9,10 to Debian 12 Bookworm


    Step 1.) Upgrade to Debian 11 first The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful. Step 2.) Update sources.list Update your /etc/apt/sources.list like this: deb http://........

  • Docker dockerd swarm high CPU usage cause solution


    If you have swarm services and dockerd is creating a high load even with the containers just being idle, the easiest solution is to upgrade to a newer docker version. For example an identical config of 3 nodes, with Redis 5 with 30 replicas produces a load of about 1.45 in Debian 10 with Docker18.09.1 If I create the same setup on Debian 11, with Docker 20.10.5+dfsg1 then the CPU usage is low. One other difference I wondered is the kernel. In my test setup........

  • apache2 httpd apache server will not start [pid 22449:tid 139972160445760] AH00052: child pid 23248 exit signal Aborted (6) solution Mint Debian Ubuntu Redhat


    If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing. The above results in this less than obv........

  • How To Setup Python3 in Ubuntu Docker Image for AI Deep Learning


    The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself. I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all. docker run -it --runtime=nvidia --gpus all ubuntu bash These works for most images li........

  • How to Configure NVIDIA GPUs with Docker on Ubuntu: A Comprehensive Guide for AI Deep Learning CUDA Solution


    Welcome to our in-depth guide on configuring NVIDIA GPUs with Docker on Ubuntu. This post is tailored for developers, data scientists, and IT professionals who are looking to leverage the power of NVIDIA's GPU acceleration within Docker containers. Whether you're working on machine lea........

  • Linux swapping too much? How to check the swappiness and stop swapping


    We could always disable swap but this would normally be a bad idea unless you have an incredible amount of RAM and a workload that will never exceed it. However, for live/containerized and high performance environments it could be desirable. Another middle ground may be to set swappiness to a lower number. You may also want to clear your kernel's cache, which could be eating up RAM unnecessarily by c........

  • request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted solution


    request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted This is usually caused by a mismatch in architecture and happens frequently in development environments. Here is a example of what caused this issue: Your binaries are based on one architecture Your kernel was compiled with another architecture. Why does this happe........

  • How To Add Multiple SSH Keys Ubuntu Mint Linux Debian Redhat


    By default if you create a private key for SSH, it will create something like .ssh/id_rsa Linux will always search for and offer this key when connecting to servers. If you put extra keys in your .ssh directory like id_rsa_realtechtalk.com, they will be ignored by default and NOT used or offered (you can verify this with ssh -v) and see it is not being offered. Here is how you add the extra SSH keys so they are all offered: #this gives........

  • How to upgrade to the latest Python version on Linux Ubuntu Debian Mint 3.11


    A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version. Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended): Step 1 - Add the repo apt-add-repository ppa:deadsnakes/ppa If you get an error about requests then install it:........

  • python3 error Ubuntu Linux error solution SyntaxError: invalid syntax line 12 pip{sys.version_info.major}


    This sort of thing normally happens your python3 or pip3 has been updated, because you have to in order to use pip, but the newer pip now breaks compatibility with your old python (3.5 in this case). There are a few solutions, the easiest is perhaps to upgrade to a newer OS with a newer distro provided Python 3 or to manually install a newer version of Python/OR use a PPA like deadsnakes that provides newer versions. ........

  • How to install and configure haproxy on Linux Ubuntu Debian


    haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx. haproxy is used by many large sites per Wikipedia: HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........

  • Linux Ubuntu Mint Gnome keyboard Typing not working in certain application or window solution


    This is a weird issue in Mint Ubuntu gnome that I've only seen on one system. It may happen in your terminal or your browser but one program will just refuse to allow input from the keyboard. I am not sure if it's some weird fluke on a strange keyboard by perhaps accidentally hitting a weird key combination. In some windows the keyboard gets weird and only / and Esc seem to work. / brings up quick find and sometimes Esc will close it........

  • talib/_ta_lib.c:747:10: fatal error: ta-lib/ta_defs.h: No such file or directory


    If you are installing ta-lib for Python and get this error then you can normally solve it by manually getting the ta-lib source files and compiling. tar -zxvf ta-lib-0.4.0-src.tar.gz cd ta-lib;./configure;make;make install Collecting ta-lib Downloading https://files.pythonhosted.org/packages/39/6f/6acaee2eac6afb2cc6a2adcb294080577f9983fbd2726395b9047c4e13ec/TA-Lib-0.4.26.tar.gz (272kB) &nbs........

  • Virtualbox Best Networking Mode In Lab/Work Environment without using NAT Network or Bridged


    Virtualbox is a very powerful tool, but for some use cases it is less than optimal. Say you are in a work, lab or other environment where you are not alone on the physical network and there could be overlap of IPs, but you need all of your VMs to be contactable from your host, VMs need to communicate with each other, and VMs need internet. NAT Network will give you VM to VM communication and internet, however, it is buggy and unstable. It also doesn't allow host to VM co........

  • Linux How to Check Which NIC is Onboard eth0 or eth1 Ubuntu Centos Debian Mint


    So say you happen to have 2 NICs of the exact same chipset, they will generally show up as the same name, with possibly a different revision in lspci. Normally this is not an issue if you have a server with 4 NICs, generally the eth0 to eth3 appears from left to the right (or right to left on some vendors) so it doesn't take much figuring out. Generally if you have different chipsets for different NICs, it should be easy to know which one is eth0 or the first NIC in the OS.........

  • docker / kubernetes breaks Proxmox QEMU KVM Bridge VMs


    Docker adds iptables rules that break a lot of things including MASQUERADE or anything that needs the FORWARD table. If NAT is not working after Docker installation, it is probably because it set the iptables FORWARD policy to DROP. This may also make you think that your br0 or bridge is not working, but it's likely just due to what we'll mention later on below, that, Docker probably set your FORWARD chain to default DROP all packets, so nothing on your bridge ever makes it out........

  • Cisco UC CME How To Enable Licensed Features


    Router#show license Index 1 Feature: ipbasek9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted Lic........

  • from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60 sys.stderr.write(f"ERROR: {exc}") from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packag


    Solution for python pip3 not working anymore from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60 sys.stderr.write(f"ERROR: {exc}") wget https://bootstrap.pypa.io/pip/3.5/get-pip.py python3 get-pip.py DEPRECATION: Python 3.5 reached the end of its life on September 13th, 20........

  • ModuleNotFoundError: No module named 'pip._internal' solution python


    pip3 install requests Traceback (most recent call last): File "/home/user/.local/bin/pip3", line 7, in from pip._internal.cli.main import main ModuleNotFoundError: No module named 'pip._internal' As a quick and temp fix call the OS installed python and not the user .local/bin installed pip3 /usr/bin/pip3 install requests Collecting requests Cache e........

  • Cisco Switch / Router How To Restore Factory Default Settings


    1.) Make sure your conf register is 0x2102 Do show version and at the very end of the output you will see the Configuration register. show version Configuration register is 0x2102 If the config register is not 0x2102 then enter this command: r1#configure terminal r1(config)#config-register 0x2102 r1(config)#end 2.) Let's Erase the NVRAM/flash........

  • Loaded: masked (Reason: Unit hostapd.service is masked.) Solution in Linux Debian Mint Ubuntu


    If you are getting this error from systemctl "Loaded: masked (Reason: Unit hostapd.service is masked.)" we need to unmask the service. Solution systemctl unmask hostapd Removed /etc/systemd/system/hostapd.service. It's fixed root@routerOS:/var/log# systemctl start hostapd root@routerOS:/var/log# systemctl status hostapd ● hostapd.service - Access point and authentication server for Wi-Fi and Ethern........

  • Linux Mint Ubuntu Ubiquity Installer Bug EFI Installed To Wrong Partition Solution


    Just an FYI that the installer ignores your selection of Boot Loader, as it was intended for MBR/Legacy. The installer horribly, even when choosing "Something Else" and manually partitioning and creating an EFIin your install drive, will still install grub to the first EFI partition it finds, even if you are following a guide like this to avoid wiping out the M........

  • i915 nouveau Nvidia GPU not starting lightdm Xorg failing solution for Could not determine valid watermarks for inherited state


    It may appear to be an Xorg or lightdm/gdm/mdm error but in reality for many users with this issue, it's a driver conflict and issue. I had a system that had two GPUs, an Intel and Nvidia GPU. The only thing that got it working was to remove the nouveau driver and blacklist it so it never came back, then the Intel GPU works fine without these issues. Solution sudo rmmod nouveau add nouveau/other driver to blacklist edit th........

  • amdgpu AMD GPU Xorg Won't Start [3576284.324] (EE) Segmentation fault at address 0x0 [3576284.325] (EE) Fatal server error: [3576284.325] (EE) Caught signal 11 (Segmentation fault). Server aborting


    Here is how Ifixed it on a Mint/Ubuntu install 1.) First download the latest AMDGPU-Pro driver from here: https://www.amd.com/en/support Navigate to your relevant video card: 2.) Download the installer One issue is that by default they give you a version for the latest version of........

  • How To Tell Which Repository a Package Comes From Debian Mint Ubuntu


    Just use apt-cache policy to find the repo of a package: apt-cache policy lxd lxd: Installed: 3.0.3-0ubuntu1~18.04.2 Candidate: 3.0.3-0ubuntu1~18.04.2 Version table: *** 3.0.3-0ubuntu1~18.04.2 500 500 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages &nb........

  • How To Reload All Kernel Modules And List Required Moduels for Each Device - Linux Mint Debian Ubuntu Troubleshooting


    One easy way is to use lspci -k like this: sudo lspci -k|grep modules|sort -nr|uniq Kernel modules: snd_hda_intel Kernel modules: shpchp Kernel modules: pata_acpi Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia Kernel modules: mei_me Kernel modules: lpc_ich Kernel module........

  • LightDM Mint Ubuntu Debian won't start errors Nvidia Graphics


    This error implies that there may be an issue with Xorg or maybe your NVIDIA GPU cannot start or initialize: 35 laptop kernel: [ 2031.857704] nvidia: loading out-of-tree module taints kernel. 35 laptop kernel: [ 2031.857724] nvidia: module license 'NVIDIA' taints kernel. 35 laptop kernel: [ 2031.857725] Disabling lock debugging due to kernel taint 35 laptop kernel: [ 2031.873280] nvidia: module verification failed: signature a........

  • MP3s Won't Play / ID3 Version 2.4 Issues in Cars and Other MP3 Players/CDs/DVDs Solution


    ID3 2.4 can cause various MP3 players, especially on vehicles or even computers, not to play or at least not to display the ID3 tags. In many cases though, since ID3 2.4 is much different than version 2.3, it will cause some players, especially in cars like Lexus not to play. Even on the computer, you may notice if you check the properties of the MP3 that it won't open or show any details (eg. frequency, bitrate and ID3 tags). One symptom of this in a vehicle (eg. Leuxs,........

  • How To Do Linux Network Bonding Teaming in Mint Debian Ubuntu


    Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows. There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........

  • GlusterFS HowTo Tutorial For Distributed Storage in Docker, Kubernetes, LXC, KVM, Proxmox


    This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory. Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage. One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........

  • Vbox Virtualbox DNS NAT Network Mode NOT working


    There is a random bug that sometimes occurs with Vbox NAT mode DNS, although it has never happened in the past and Vbox was working fine until recently. The symptom is that you can see it does get an IP+ DNS from the Vbox NAT DHCP. Below we use resolvectl dns and verify the DNS server is set to 10.0.2.3 which is the DNS from Vbox NAT. We can ping it but it does not respond to any DNS requests when we use dig @10.0.2.3 realtechtalk.com........

  • Docker Tutorial HowTo Install Docker, Use and Create Docker Container Images Clustering Swarm Mode Monitoring Service Hosting Provider


    The Best Docker Tutorial for Beginners We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........

  • Zoom Password Error 'That passcode was incorrect' - Solution Wrong Passcode Wrong Meeting Name


    Have you been given a Zoom password that the meeting owner says is correct but it doesn't work anymore or never works? If the meeting name says "Zoom Meeting" and it's not really named that (which most meetings are not), then the issue is usually that there is an initial password to be able to join, aside from the passcode. It basically means that Zoom has deauthenticated you randomly or maybe after X amount of uses, without clicking on the Join Meeting URL which contains a........

  • How To Create OpenVPN Server for Secure Remote Corporate Access in Linux Debian/Mint/Ubuntu with client public key authentication


    Why choose OpenVPN instead of a firewall appliance? OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time. When comparing OpenVPN with traditional firewal........

  • HongKong VPS Server, Cloud, Dedicated Server, Co-Location, Datacenter The Best Guide on Hong Kong, China Internet IT/Computing


    In our 2024 VPS Server/Cloud Buyer's Guide, we place the location of your VPS/hosting/server as one of the priorities that is often overlooked. 2024 Update - Datacent........

  • Linux Debian How To Enable Sudo/Sudoers for User "User not in sudoers file" Solution


    If you get an error that you aren't in the sudoers file, this typically means that your user is not designated as an admin with sudo privileges. In plain English, when it comes to some OS's like Debian including 10,11 etc.., by default the user is created without special privileges which is contrary to how Ubuntu/Mint handle the secondary user. Let's check the sudoers file to see the problem.........

  • Ansible Tutorial - Playbook How To Install From Scratch and Deploy LAMP + Wordpress on Remote Server


    1. Let's work from an environment where we can install Ansible on. If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way: sudo apt install gpg sudo add-apt-repository ppa:ansible/ansible sudo apt update........

  • Linux Ubuntu Debian Centos Mint - How To Check if Intel VT-x or AMD-V Hardware Virtualization is Enabled?


    From the terminal do this: cat /proc/cpuinfo|grep -E "svm|vmx" You should get output like this(svm = AMD-v and vmx=Intel-VTx): flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqd........

  • How to install Kubernetes with microk8s and deploy apps on Debian/Mint/Ubuntu Linux


    Kubernetes Easy Beginners Architecture Guide Kubernetes is known as container orchestration and we should start at explaining the container part of it. A Container is what runs the actual application and based on an Image, and are more comparable to something like an LXC Container, Virtuozzo/OpenVZ using the Linux Kernel Namespaces feature. Containers run these images as independent, isolated operating environments under the OS's exist........

  • EFI PXE grub2 Howto guide for Linux EFI PXE Booting on Debian, Mint, Ubuntu, RHEL


    Just a quick note and warning is that if you are testing to see if EFIPXE booting works on a VM, MAKE SURE it actually works. For example Iinitially tested using my Distro's QEMU 2.5+dfsg-5ubuntu10.46 and ovmf BIOS firmware (OVMF supports EFI). However, I found on old versions of QEMU (like 2.5), EFIbooting with GRUB NEVER works so it may appear that you have made a mistake when everything is fine when you boot a physi........

  • Juniper JunOS Command Overview and Howtos Switch, Router, Firewall Tutorial Guide


    Enable "cli" mode equivalent in JunOS cli Configure Mode configure So rather than going to the console on a Cisco switch and typing "enable" and then "conf t", the equivalent in JunOS is "cli" and "configure". How Do You Apply Changes You've Made? You can make all kinds of changes to the switch, but remember they are not........

  • QEMU KVM Keyboard Problems Not Working Right Repeating Characters, Ctrl+C Copy and Paste not working right when using PS2 mouse in guests Solution


    It seems that QEMU/KVM's default PS2 mouse and keyboard doesn't work right in most cases. I have especially observed issues using Ctrl+C and Ctrl+V and in Linux you may see repeated key presses in the terminal and you will wonder why you copied something and it's not in the clipboard when you try to paste. The way to temporarily fix it is to press the key that is repeating once(works in Linux but not really in Windows). Sometimes when moving your mouse it will also s........

  • Linux how to compile binary with static sharedobjects embedded instead of dynamic to use on multi-distributions and avoid glibc compatiblity issues


    One simple flag to configure will create a makefile that statically links all the shared objects and embeds them instead the binary execute. This means as long as you have the same architecture that things should run. Eg. if you have an old version of Debian with a different version of glibc, then this will solve that problem. ./configure LDFLAGS="-static" To test that it is really statically linked run ldd: ldd src/wget........

  • /bin/sh: msgfmt: not found error solution on Linux Compilation Ubuntu Debian Mint Centos


    If you get this error, you were probably compiling some sort of binary or package and got this error. It is normally solved by installing the "gettext"package. On Debian/Ubuntu just apt-get it: apt-get install gettext After that you should be able to configure and make (compile) properly.........

  • Mikrotik RouterOS CHR/ISO Basic and Quick Setup Howto Guide


    Many people may not be aware that you can turn commodity hardware into a Mikrotik OS and there are various options which is "CHR" (Cloud Hosted Router) which is a VMimage meant for Virtualization only (seriously, I've tried to dd the image to a physical server and it just crashed as it does not contain any drivers for physical). One note as well if you are trying to do a baremetal install you may get an error "Error Loading Operating System" or........

  • qemu 4 compilation options


    How To Compile QEMU Manually (using sensible options) 1.) Download the QEMU source file you want. wget https://download.qemu.org/qemu-4.2.0.tar.xz 2.) Extract The Source File tar -Jxvf qemu-4.2.0.tar.xz 3.) Switch to the extracted source cd qemu-4.2.0 4.) Make sure we have the right libraries and tools to compile QEMU manually sudo apt install build-e........

  • kdenlive full reset how to erase all config files


    kdenlive is VERY finicky especially if using an older or newer version it can cause crashes, menus not to work, features not to work, things not to work properly. A good example is that Icould NOT get automask to work, there would be no box to control it until I did this full reset. One caution is that your backup project files will be erased when doing this: How to Reset kdenlive entirely rm ~/.config/kdenlive-layoutsrc rm........

  • Huion and Wacom Tablets How To Install in Linux Mint / Ubuntu and make the stylus work properly


    It took a lot of fiddling to make a Huion Kamvas 13 Pro work in Linux but it simple once you know what to do. Don't bother searching as it is unlkely there is a guide out there that will actually make your tablet work. It mainly comes down to the fact that the hid_uclogic kernel module is buggy or doesn't support MANYof these wacom based/Huion tablets properly. What was happening with me is that Ihad the Kamvas 13 Huion setup as a secondary screen/monitor.&nb........

  • How To Replace Audio Track of Video using ffmpeg


    A very common use case is that you don't want to waste time using a video editor that requires you to open it up and manually import the video clip and audio clip, then manually delete the old audio track and import the video and new audio. That's too much work and time since we don't want to go through the hassle. ffmpeg is our solution, all we have to do is specify 3 variables and we're done! -i Windows2019-Server-Noaudio.mp4 is our in........

  • Linux Mint Dual Boot Install Avoid Wiping our your Main C: drive /dev/sda MBR and EFI


    Before you try to install and dual boot it is very important to understand the concept of "what boot mode your BIOS is in" and "what mode you booted the installer to". Then follow the example of Linux Mint (but most Linux installers are very similar)to carefully understand WHERE you are installing your Boot Loader to whether that be MBR or EFI. How Am IBooted? First it's important to check your BIOS to see........

  • apcupsd how to setup and monitor APC UPS units


    It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc.. wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866 tar -zxvf apcupsd-3.14.14.tar.gz cd apcupsd-3.14.14 [root@somebox apcupsd-3.14.14]# ./conf........

  • How To Password Reset, Recover, Bypass, Remove and Unlock on Windows 10,8,7,Vista,XP,NT,2000,2003,2008,2012,2016,2019 Administrative Login Programs


    If you've come here, don't be embarraassed, working in IT, this is the MOST common computer problem that almost everyone will encounter. The reason why I'm doing this post is because I've seen an increase from colleagues and admins having this problem and many times it's not even your fault. A common scenario is that someone acquires a new or used computer which they weren't given the password for. Fortunately Ihave a detailed list of all the options whether free or pa........

  • Nvidia Ubuntu Linux Screentearing Video with solution driver


    This seems to happen on most if not all Nvidia cards but the good news is that if you are using any of the Linux drivers and have the nvidia-settings tool installed it is just a simple command. Solution: nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }" Enter the above command in your terminal and the screentearing will be fixed which is like enabling Tear Free on AMD cards.&........

  • mdadm how to stop a check


    Is a mdadm check on your trusty software RAID array happening at the worst time and slowing down your server or NAS? cat /proc/mdstat Personalities : [raid1] [raid10] md127 : active raid10 sdb4[0] sda4[1] 897500672 blocks super 1.2 2 near-copies [2/2] [UU] [==========>..........] check = 50.4% (452485504/897500672) finish=15500.3min speed=478K/sec ........

  • "This kernel requires the following features not present on the CPU: cmov Unable to boot - please use a kernel appropriate for your CPU.


    You should only get this if you are using a Pentium II or something really old. The problem here is that newer kernels than 2.6 don't have true i386 support even if you tell it to compile as i386. It will still include features like cmov that break older computers from being able to work. Generally for very old computers like above, you need to use a 2.6.x kernel and of course make sure it is i386 and all the binaries are as well. ........

  • CentOS 6 impossible to compile a newer libguestfs


    yum -y install gcc make gperf genisoimage flex bison ncurses ncurses-devel pcre-devel augeas-devel augeas readline-devel checking for cpio... cpio checking for gperf... no configure: error: gperf must be installed configure: error: Package requirements (augeas >= 1.2.0) were not met: Requested 'augeas >= 1.2.0' but version of augeas is 1.0.0 yum remove augeas augeas-libs augeas-devel wget http://downl........

  • How To Get Started on Ubuntu with gpt-2 OpenAI Text Prediction


    apt install software-properties-common add-apt-repository ppa:deadsnakes/ppa apt update apt install python3-pip apt install python3.7 curl gnupg python3.7-dev git ln -s /usr/bin/python3.7 /usr/bin/python3 pip3 install numpy keras_preprocessing curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add - echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........

  • Linux Debian Ubuntu How To Install PEPPER Faster and Latest Adobe Flash Player in Firefox


    Just run this apt install command sudo apt install pepperflashplugin-nonfree browser-plugin-freshplayer-pepperflash After this restart your browser and check Adobe's site to verify if your Pepper flash is working and showing at least version 32. https://helpx.adobe.com/flash-player.html As you'll see below it will download the latest version which is currently 32 and this was not possible with the old/crappy deprecated adobe-flash plu........

  • How To Install NextCloud on Centos 7 and Centos 8


    yum -y install wget unzip wget https://download.nextcloud.com/server/releases/nextcloud-18.0.2.zip unzip nextcloud-18.0.2.zip yum -y install php php-mysqlnd php-json php-zip php-dom php-xml php-libxml php-mbstring php-gd mysql mysql-server Last metadata expiration check: 0:58:02 ago on Fri 13 Mar 2020 02:12:49 PM EDT. Dependencies resolved. ===================================================================........

  • ERROR: Could not find a version that satisfies the requirement PIL (from versions: none) ERROR: No matching distribution found for PIL


    pip install PIL ERROR: Could not find a version that satisfies the requirement PIL (from versions: none) ERROR: No matching distribution found for PIL The import name is PILbut the actual pip package is called "Pillow" pip install Pillow........

  • How To Install python 3.4 3.5 and up on Linux with wine - Working Solution


    This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu! Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........

  • OpenVZ vs LXC DIR mode poor security in LXC


    It is unfortunate that LXC's dir mode is completely insecure and allows way too much information from the host to be seen. I wonder if there will eventually be a way to break into the host filesystem or other container's storage? OpenVZ better security: [root@ev ~]# cat /proc/mdstat cat: /proc/mdstat: No such file or directory /dev/simfs 843G 740G 61G........

  • MySQL 5.7 on Debian and Ubuntu - How To Reset Root Password


    MySQL on Debian versions is configured differently than the native local MySQL plugin so you will be disappointed when your password on the mysql client fails by default. Here is how you reset the MySQL root password the proper and "working way" #first we gracefully stop mysql sudo systemctl stop mysql; #then we forcefully kill any mysqld process just in case sudo killall -9 mysqld mysqld_safe;........

  • Debian and Netplan


    Create your netplan file vi /etc/netplan/01-netcfg.yaml network: version: 2 renderer: networkd ethernets: ens3: dhcp4: no ........

  • python ModuleNotFoundError: No module named 'bs4' even though you have the module


    In this case I am executing using "python3" but what you find in cases like this can be surprising. The most common issues are that someone has a module for python 2 "pip" and doesn't realize they need "pip3" to install it for python3, but this is not one of those cases. ModuleNotFoundError: No module named 'bs4' OKmaybe we didn't install it for python3? [........

  • mpv / mplayer with Radeon / AMD GPU Video Card Driver enable VDPAU GPU Accelerated Video Decoding


    The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration. Let's manually play with vdpau to make sure it works before we make it permanent: First make sure you have libvdpau installed: sudo apt install vdpau-driver-all If yo........

  • How To Install Asterisk 16 17 on Debian Ubuntu Linux


    Downloading and compiling from source to get the latest version of Asterisk is really simple with this guide. apt install gcc make g++ libedit-dev uuid-dev libjansson-dev apt install libxml2-dev sqlite3 libsqlite3-dev wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-16-current.tar.gz tar -zxvf asterisk-16-current.tar.gz cd asterisk-16.6.2/ ./configure If you get this error change y........

  • How To Restore Windows MBR Bootsector from Linux using syslinux


    There are many ways but a favorite way is to boot any Linux LiveCD and to use the syslinux package like so: Just change the "sdx" to your sd for example /dev/sda or whatever the drive is that is supposed to boot Windows. sudo dd if=/usr/lib/syslinux/mbr/mbr.bin of=/dev/sdx 0+1 records in 0+1 records out 440 bytes copied, 0.0197808 s, 22.2 kB/s........

  • Linux Ubuntu Cannot Print Large Images


    If you are using the default "Image Viewer" aka Xviewer it seems to die on very large resolution files. It seems to understand to scale them but the printer will try to print and then fail. Using "Pix" viewer seems to fix this and causes these larger files to print just fine. ........

  • Cannot Print PDF Solution and Howto Resize


    If you can print other PDFs but not a particular one it is very likely that the PDF size is A4 (the longer, skinnier Asian paper size) instead of the North American letter size ( 8.5" x 11"). This breaks printing in most cases. Or it may print if you find a program that ignores the size issue. Here is an example of an A4 being rejected by a printer in Ubuntu Linux via CUPS Cannot print PDF CUPS Samsung C460: Processin........

  • MySQL Bash Query to pipe input directly without using heredoc trick


    Most of us know the heredoc method but what if you need a basic query done repeatedly and manually while working from bash? It is a pain to manually type mysql and login each time. With this command below you can semi-automate those queries: echo "use somedb; select * from auctions" | mysql -u root --password="yourpassword" Just modify the above to suit your needs and you can add more queries by adding a sem........

  • CentOS 6 and 7 / RHEL Persistent DHCP Solution


    It is very silly but the default on the ifup-eth script tells dhclient ( the program that obtains a DHCP IPaddress if you have selected DHCPin your ifcfg-eth* config file) to EXIT / QUIT if the first attempt to obtain a lease fails. No amount of dhclient.conf settings will fix this because if dhclient is started with -1 (which it is by default)then dhclient will quit. This is obviously very bad for MOST cases. Say for example you have a power outage or........

  • bash script kill whois or other command that is running for too long


    Adjust to suit your needs. Currently this would kill any whois process running for more than 30 seconds or more than 1 minute. Add it as a cronjob. The motivation is that some commands have no timeout and just end up using up CPU and memory for no reason while never exiting to free resources. #!/bin/bash IFS=$(echo -en "nb") for pid in `ps aux|grep whois`; do echo "pid=::$pid::&qu........

  • Linux tftp listens on all interfaces and IPs by DEFAULT Security Risk Hole Solution


    Just edit your tftp file for xinetd like this: *Change the IPto be the IPof the interface you want to listen on. To test if your tftp is available on a certain IP range use nc -u yourip 69 to see if you can still connect (/var/log/messages or /var/log/syslog) should show the connection if it is open. Oct 13 23:20:34 01 xinetd[26631]: Started working: 1 available servic........

  • python import docx error


    sudo pip3 install python-docx [sudo] password for : Downloading/unpacking python-docx Downloading python-docx-0.8.10.tar.gz (5.5MB): 5.5MB downloaded Running setup.py (path:/tmp/pip_build_root/python-docx/setup.py) egg_info for package python-docx no previously-included directories found matching 'docs/.build' warning: no previously-included files matching '.DS_Store' foun........

  • Cisco Unified Communications Manager Express Cheatsheet CUCME CME Tutorial Guide


    Video Links: How To Setup 2 Phones on a Single CME Router and get the GUI going. How to use Dialpeers with CME with two routers How to implement call restrictions using COR / Class of Restriction Getting started, let's enable ephones and DNs we can add a phone with........

  • Centos 7 tftpd will not work with selinux enabled


    In Centos 7 tftpd will not work with selinux. Clients will not be able to connect and this is all you'll see in the log (then nothing more): Sep 18 14:39:15 localhost xinetd[4327]: START: tftp pid=4331 from=192.168.1.65 On the client/computer side you will see this: TFTP. PXE-M0F: Exiting Intel Boot Agent Basically the client is being instantly connected and bloc........

  • python 3 pip cannot install mysql module


    python3 testserver.com-car-scraping.py html.txt Traceback (most recent call last): File "testserver.com-car-scraping.py", line 5, in import mysql.connector ImportError: No module named 'mysql' For some reason it won't install properly even though I have the mysql client on this machine installed too. Solution: You need the mys........

  • Linux Mint How To Set Desktop Background Image From Bash Prompt CLI


    The way of doing it in mint is different than gnome and ubuntu. gsettings set org.mate.background picture-filename /path/to/file.jpg *If you try to use the gnome way it will NOT work with Linux Mint: gsettings set org.gnome.desktop.background picture-uri /some/pic.jpg........

  • Ubuntu/Gnome/Mint/Centos How To Take a partial screenshot


    By default printscreen or alt print screen will get the whole desktop or the application in focus, respectively. But what if you want to select a portion of the screen? gnome-screenshot: ksnapshot compiz This is a nicely integrated solution sudo apt-get install compizconfig-s........

  • Firefox Cannot Hit Enter Key In Address Bar and Location History Not Working


    Opening Firefox from the CLI reveals the following as the cause of the error: Query failed: Error: Error(s) encountered during statement execution: no such table: moz_favicons The symptoms of this issue are that in the address bar you cannot hit enter to browse to a site/url/address and your history cannot be accessed, nor does your history show up in the address bar when typing previously used addresses. This usually happens because you've........

  • Cisco Unified Communications Manager / CUCM IP 8.6,10,12 Install Error Solution


    Install Errors on Version 12: This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5 on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error. *Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install. What really causes this even though you successfully install........

  • bind / named how to make a wildcard record and retain defined A records


    It is almost as intuitive as we would like it is just a *. So literally: *INA 127.0.0.1 Complete working bind zonefile below: $TTL 86400 @ IN SOA ns.rtt.ca. ns2.rtt.ca. ( 1247605715; Serial &n........

  • Cisco Unified Communications Manager 12 Install Errors on Proxmox/KVM


    The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs. qemu-kvm command: /usr/libexec/qemu-kvm -version QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard ........

  • tftp Linux xinetd verbose logging


    It is much more useful to have meaningful and detailed logging from tftp to see what is or isn't happening especially for VOIPand other embedded device appications: Edit the file: vi /etc/xinetd.d/tftp Change the server line like this: server_args = -s /var/lib/tftpboot........

  • Linux qemu-kvm How To Enable Soundcard in Guestl


    Pass QEMU this flag: -soundhw ac97 Or you could use (for a Ensoniq soundcard): -soundhw es1370 However on some machines I get this error: pulseaudio: pa_simple_new for capture failed pulseaudio: Reason: Connection terminated pulseaudio: pa_simple_new for capture failed pulseaudio: Reason: Connection terminated audio: Failed to create voice `ac9........

  • Cisco CUCM Unified Communication Manager Howto Guide and Tutorials


    Install Issues: How to Make CUCM iso /modify to work on non-VMWare machines like QEMU/Xen/OpenStack If you get kernel panic errors in VBOX usually disabling Nested Paging will fix the issue (thanks to Mark). ks_pre.sh error is caused by having the wrong VDX pattern (change it do sd per guide link above) and/or the wrong VMSpecs (Cisco req........

  • How To Use Letsencrypt SSL/TLS Encryption to Create Certificates without installing on the target machine


    For some reason, perhaps you don't want to run a daemon or let Letsencrypt have access to your production server. There is a way to use it like a normal CSR/CA setup in manual mode. ./letsencrypt-auto certonly --manual -d realtechtalk.com - www.realtechtalk.com   Eventually you will get prompted to create a certain path and file with certain data: Create a file containing just this data: Casdfasfadsfsad........

  • Cisco Router Setup Guide and Tutorial Howto With Commands and Examples


    In most of the Cisco router IOS I find the ports like ge0/0 ge0/1 and ge0/2 or whatever your ports are down. They will not even give you a link light. So one of the first tasks should be getting the port you are working with up. In my case the first goal is often connectivity with the LAN and WAN. LAN = your local area network (eg. in the office/home ) WAN= your ISP/public internet (eg. fiber/cable/dsl/ethernet).........

  • Cisco DHCP Snooping Relay Setup Information


    Switch#show ip dhcp snooping Switch DHCP snooping is disabled DHCP snooping is configured on following VLANs: 1 Insertion of option 82 is enabled circuit-id format: vlan-mod-port remote-id format: MAC Option 82 on untrusted port is not allowed Verification of hwaddr field is enabled Interface&nb........

  • Cisco Switch Reset To Factory Defaults


    This works on the 2000 and 3000 series generally. *The easy way is to just hold the mode button for 10+ seconds. The full/proper way is below: 1.) Either power on the unit and hold the "mode" button or hold the "mode" button until you see the below: 00:04:08: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram 00:04:08: %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configur........

  • How To Boot Cisco CUCM UCSInstall 8.6, 10, 11 and 12 on KVM/Proxmox


    The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported. Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........

  • VBOX VirtualBox How To Import Raw .img Disk File


    What you need to do if you have taken a dd or real raw image dump of a hard disk: VBoxManage convertdd windows2019-eval-template.img windows2019.vdi --format VDI The .img is the raw dd dump and the .vdi is the output file. --format VDIspecifies to output to .vdi format If you are in a pinch you can always use qemu-kvm binary and manually specify the .img as your disk and i........

  • Centos 7 Reallocate logical volume space to another


    Do you hate how Centos 7 defaults to allocating most of your valuable space to /home even though it is a production server? Here is a quick guide on how to take back that space live, while online (of course make sure you have backups just in case something goes wrong!): First we will reduce our home dir by 100G: lvreduce -L -100G /dev/mapper/centos-home WARNING: Reducing active and open logical volume to ........

  • Thunderbird How To Disable An Email Account


    Navigate to Tools -> Account Settings -> Server Settings Uncheck the following: "Check for new messages on startup" "Check for new messages every NN minutes" "Automatically download new messages". Source: http://forums.mozillazine.org/viewtopic.php?t=635510........

  • mdadm force resync when resync=PENDING solution


    cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md127 : active (auto-read-only) raid10 sdc1[0] sdb1[2] 1953382400 blocks super 1.2 512K chunks 2 far-copies [2/1] [U_] resync=PENDING bitmap: 15/15 pages [60KB], 65536KB chunk Solution force repai........

  • Proxmox Breaks Storage/LVM Backing If Killing QEMU-IMG


    I tried to stop a qemu-img copy or clone and it broke everything. It was fine to "stop" it from the GUI but a process still persisted so I killed the relevant qemu-img and the kernel went crazy. It also may not have helped that I tried to lvremove a different volume (an unused disk). But either way it breaks LVM (you cannot even run lvdisplay) so a reboot is necessary. Jan 17 06:45:21 testserver kernel: [ 5680.439337] systemd-udevd D 0&nbs........

  • mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument solution


    mdadm --manage /dev/md125 -a /dev/sdb4 mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument Dec 19 01:23:48 storageboxtest kernel: [ 2328.854491] md: sdb4 does not have a valid v1.2 superblock, not importing! Dec 19 01:23:48 storageboxtest kernel: [ 2328.854499] md: md_import_device returned -22 #zero the superblock and try again! mdadm --zero-superblock /dev/sdb4 mdadm --ma........

  • Why SMART is not smart at all and doesn't properly predict disk errors that cause a kernel panic or crash


    Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated. It has caused a kernel panic and system crash repeatedly as we can see from the logs. But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector. Any time I have had anything but 0 for that attribute it........

  • bash scripting how to create a function


    function centos7 { release=`cat /etc/redhat-release|awk '{print $4}'|grep ^[7]` if [ "$release" != "" ]; then centos7='yes' fi } centos7 echo "$centos7" We create a function called "centos7" and then call it by just typing "centos7" We then access a variable that may be set........

  • How Does Cisco CUCM (Cisco Unified Communication Manager) Work?


    Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments. Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........

  • systemd management using systemctl and journalctl to check systemd logs


    systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system. The key commands or arguments you will use with systemctl are the following: Unit Commands: list-units [PATTERN...] List loaded units &nbs........

  • Linux Permissions and Groups Real Usecase for Group Access


    Ihave a directory structure which the primary user needs full access on but wanted a user to access only a specific directory within the main directory (so they could write in there only and nowhere else). Here's what Idid: [root@compevo8001 dllnow]# ls -alh drwxrwxr-x 2 someuser software 4.0K Oct 19 2017 ExpireYMD-2017-11-20 drwxrwxr-x 2 someuser software 4.0K Nov 19 2017 ExpireYMD-20........

  • HP DL385 G7 Linux BIOS Update Flash


    wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe --2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85 Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1525561 (1.5........

  • hwloc-nox set CPU affinity in Linux


    sudo apt-get install hwloc-nox Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: hwloc-nox 0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded. Need to get 151 kB of archives. After this operation, 453 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubunt........

  • vmkping -I vmk1 10.0.2.69 PING 10.0.2.69 (10.0.2.69): 56 data bytes sendto() failed (Host is down)


    [root@localhost:~] vmkping -I vmk1 10.0.2.69 PING 10.0.2.69 (10.0.2.69): 56 data bytes sendto() failed (Host is down) vsphere distributed switch vmotion not working [root@localhost:~] esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface&........

  • VMWare vSphere 6.7 Errors Solution 503 Service Unavailable (Failed to connect to endpoint:


    503 Service Unavailable (Failed to connect to endpoint: [N7Vmacore4Http20NamedPipeServiceSpecE:0x00005556ba09c070] _serverNamespace = / action = Allow _pipeName =/var/run/vmware/vpxd-webserver-pipe) 503 Service Unavailable (Failed to connect to endpoint: [N7Vmacore4Http16LocalServiceSpecE:0x00007fd26000b240] _serverNamespace = /ui action = Allow _port = 5090) Errors like the above are usually because there is an issue with your vSphere or more commonly it i........

  • VMWare ESXi 6.7 SSH/PowerShell CLI Commands


    [root@localhost:~] BootModuleConfig.sh echo host-ind nfcd........

  • VMWare Vsphere VCSA Graphical Install Creates json


    yes it does create its own json ============================================ cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json 2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1 --> ........

  • Debian Mint Ubuntu compiling xmr-stak


    sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3 sudo apt-get install libcurl4-gnutls-dev git clone https://github.com/wolf9466/cpuminer-multi sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev git clone https://github.com/fireice-uk/xmr-stak-cpu.git make install cd bin chmod +x xmr-stak-cpu ./xmr-stak -O xmr........

  • migration/4 migration 4 is using too much CPU


    top - 13:02:52 up 603 days, 19:19, 2 users, load average: 5.01, 4.15, 3.44 Tasks: 604 total, 5 running, 599 sleeping, 0 stopped, 0 zombie Cpu(s): 17.7%us, 36.1%sy, 0.0%ni, 42.0%id, 4.1%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 16278908k total, 4269684k used, 12009224k free, 119672k buffers Swap: 8k total, ........

  • Linux Mint 18 Screen Goes Dark or Black After Screensaver or even when using the Desktop Solution


    You can search for this bug and it seems like it may be related to ecryptfs and is many years old. The symptoms are that you return to the computer and the screensaver was active or the screen was asleep/black and it doesn't seem to come back. But you check by SSH the computer is running fine and are frustrated you'll lose your running programs and have to reboot. There is a simple solution: Ctrl + Alt + F1 Ctrl +Alt + F8 Ba........

  • VSphere InternalServerError - Error When Adding Permissions


    InternalServerError (com.vmware.vapi.std.errors.internal_server_error) => { messages = [LocalizableMessage (com.vmware.vapi.std.localizable_message) => { id = vapi.bindings.method.impl.unexpected, defaultMessage = Provider method implementation threw unexpected exception: com.vmware.vapi.std.errors.InternalServerError, args = [com.vmware.vapi.std.errors.InternalServerError] }], data = } I was getting the........

  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........

  • postfix errors fatal: no SASL authentication mechanisms /usr/libexec/postfix/smtpd: bad command startup -- throttling solution


    Jul 3 22:12:17mailserver postfix/smtpd[6195]: fatal: no SASL authentication mechanisms Jul 3 22:12:18mailserver postfix/master[4881]: warning: process /usr/libexec/postfix/smtpd pid 6195 exit status 1 Jul 3 22:12:18mailserver postfix/master[4881]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling This only ever happens in my experience when the authentication method is actually Dovecot. Usually the problem........

  • named [FAILED] - zone 1.168.192.in-addr.arpa/IN: not loaded due to errors. - bind error solution


    Centos when copying old files and restarting it seems load everything fine and then says [FAILED] with no log or other message. service restart named named [FAILED] Check more thoroughly you may have missed the error if you have lots of zones! service named restart|grep error zone 1.168.192.in-addr.arpa/IN: not loaded due to errors. zone 2.168.192.in-addr.arpa/IN: no........

  • OpenVPN cannot ping remote IP routing loop issue after connecting


    Sometimes if you have a very basic configuration OpenVPN on the client side for some reason sends all traffic to the OpenVPN server IP through the tun0 which is of course impossible and creates a block or routing loop. This is because you need to use your normal ISP/LANgateway to hit the OpenVPN server if it is remote/offsite as is usually the case. So if you are connected to the OpenVPN through say a tun0 device and your routing is set to connect to the OpenVPN&nbs........

  • Linux Mint Black Screen after boot no graphics solution


    This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help. Here is the short end of the stick that fixed it: sudo apt-get install mdm mate-desktop-environment Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........

  • Intel NUC J3455 Linux Kernel freeze slowness 4.4.98 errors


    It looks like this has something to do with APIC but I am not sure. I have similar CPUs with a different MB and BIOS that work fine on the same type of kernel. A lot of time the issue is because of the C-step setting in the BIOS. The same thing happened on the 2.6 kernel with Centos 6 but this is a homebrew 4.4 kernel soI am not sure why it is happening when even Centos 7 (3.2) kernel works OK. Solution - It comes down to the BIOS set........

  • named[1525]: error (broken trust chain) resolving 'min-api.cryptocompare.com/A/IN': 173.245.58.78#53 solution


    So you restarted your router/dhcpd server or for some other reason you wonder why DHCP is not working on any of your clients?You go and check that named is in fact running fine. But then you check /var/log/messages and see this error for everything hostname: named[1525]: error (broken trust chain) resolving 'min-api.cryptocompare.com/A/IN': 173.245.58.78#53 I've only ever seen this when the time on the server was off. It........

  • Linux Ubuntu Mint Debian cannot play xvid,x264,mp4 or any videos codec issue - xplayer Could not initialize supporting library.


    In xplayer Iget the following error "Could not initialize supporting library.". It actually looks more like a gstreamer issue. For those wondering what the default video player is called it is "xvid" and not "totem" anymore like previous versions. Basically it looks like some codecs are missing when I uninstalled another program it uninstalled other programs and codecs that it shouldn't have. I've tried installing all the gstre........

  • imagemagick convert to chop off top of image


    This is useful if you have a bunch of images/scans where the same area at the top needs to be chopped. Sometimes the -trim option (such as the case of white space on top)is wrong and ends up cropping the image and losing some text. ImageMagick's convert is very useful but tricky to find some things out as I find it to be less than intuitive sometimes. Chopping off the bottom convert -crop -0-400 image.jpg image.pdf........

  • How To Turn Any .iso file into a bootable USB drive


    This works for almost all ISO's Ifind (at least Linux based): sudo dd if=CentOS-6.9-x86_64-minimal.iso of=/dev/sdg bs=20M 20+1 records in 20+1 records out 427819008 bytes (428 MB) copied, 118.233 s, 3.6 MB/s Of course change the .iso filename above and the /dev/sdg to your desired USB drive!........

  • Linux How To Clone One System Harddrive to another remote system


    The easiest way is to use SSHand DD or a combination of netcat. SSHwill be a little slower due to encryption but is the most secure way (on two older systems the average clone speed is about 40-50MB/s). This is also OS independent as it doesn't matter what the source OS is because you are literallly cloning the drive so you retain the partition table and settings. Clone HDD using SSH and DD........

  • Ubuntu/Debian/Linux won't boot and drops to Busybox shell after cloning HDD with dd


    I don't recall having this issue in the distant past but nowadays at least Debian seems to be very picky about this. I used dd to copy one hard drive to another and tried booting it. Everything seemed fine with grub working but each time it would drop to the busybox shell. There is no particular error so this is misleading. Normally the first things you would check are to make sure your fstab is correct (that the UUID is correct)and that you've updated grub.&........

  • MySQL Cannot Update/Write to any database table solution


    This happened on Centos for no apparent reason with no obvious issue in the logs. Data could be read fine but not written (possibly due to some corruption or out of memory issue in the OpenVZ container is the best guess). All mysql update and insert queries failed freezing without any error log on any database and table. Tried to restart: service mysqld restart Timeout error occurred trying to stop MySQL........

  • Centos How To Update to Glibc 2.14 Plus


    Centos 6 requires GLIBC 2.12 however a lot of new programs you would want to compile may need a newer glibc. You can't remove the old glibc since the whole OS is based on it but you can install the updated glibc alongside it and do an export pointing to your updated GLIBC. mkdir ~/glibc_install; cd ~/glibc_install wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz........

  • Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/httpd/modules/libphp5.so: cannot open shared object file: No such file or direct


    Stopping httpd: [ OK ] Starting httpd: httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/h........

  • GCC 5 on Centos 6 - How To Install


    Install requirements: yum -y install gmp-devel mpfr-devel libmpc-devel glibc-devel glibc-devel.i686 zip unzip jar Download, untar, configure, compile and install GCC http://mirrors.kernel.org/gnu/gcc/gcc-5.5.0/gcc-5.5.0.tar.gz tar -zxvf gcc-5.5.0.tar.gz cd gcc-5.5.0 ./configure make make install Now you need to cleanup th........

  • pcimodules and lspci not working alternative solution


    pcimodules no longer works it produces nothing probably because the format of /sys/bus/pci is different. lspci -k doesn't work on older lspci versions. pciutils can be compiled but it won't work if you have an old system and compile on a newer glibc. iteriate through /sys/bus/pci/devices/*/modalias cat /sys/bus/pci/devices/*/modalias pci:v00008086d00001237sv00000000sd00000000bc06sc00i00 pci:v00008086d00007000sv0000000........

  • How to disable Google Fonts in Wordpress


    edit theme css: Click "Appearance -> Editor -> Stylesheet" http://yourblog.com/wp-admin/theme-editor.php?file=style.css&theme=twentysixteen textarea { color: #1a1a1a; /*font-family: Merriweather, Georgia, serif;*/ font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif........

  • css responsive images


    add this style="background-size: contain;max-width: 100%; height: auto;" to your img code. Example: ........

  • linux cp and mv will not overwrite due to alias!


    This through me for a loop when I would do a cp -rf or mv -f nothing would get overwritten even if piping y or yes to the command. Type alias and you'll see why: alias cp='cp -i' alias l.='ls -d .* --color=auto' alias ll='ls -l --color=auto' alias ls='ls --color=auto' alias mv='mv -i' alias rm='rm -i' The -i is a safeguard against messing things up but however does mess things up worse when you know what........

  • Disable SSH Password Authentication to Increase Security and Harden SSH Linux Unix Server Ubuntu Mint Centos Debian


    Just a note before you do this you should have a sure, guaranteed way into the system such as local, KVMor preferably publickey making bruteforce SSH absolutely impossible since there is no password to bruteforce and even if someone knew the password they wouldn't be able to login except from the local console (presumably you should make sure no one unauthorized has physical access). 1. Edit /etc/ssh/sshd_config Find the section like this:........

  • Linux bash script to see what connected computers respond to ping


    A great way when moving your equipment to a new location, new router/switch etc to help confirm what MAC has what IP: for ip in `arp -na|awk '{print $2}'|sed s/(//g|sed s/)//g`; do echo ping $ip ping -c 1 -w 1 $ip > /dev/null if [ "$?" == 0 ]; then echo "$ip UP" fi done........

  • Centos 6.6/6.9 KVM VM Kernel Panic On Boot - Kernel panic - not syncing: Attempted to kill init!


    Iam not sure why this is happening neither the hostnode or VM changed. All I did was reboot the hostnode and startup the Centos VM again, also note it happened with the original kernel on the VM and also the latest 6.9 kernel as of this writing as shown below. Host Node: Centos 6.9 Kernel:2.6.32-696.6.3.el6.x86_64 Kernel: 2.6.32-042stab123.9 Same result in any kernel above........

  • kdenlive titles/text renders as white screen when using .sh script


    When using the .sh script the rendering doesn't work after an upgrade of related packages to kdenlive. kdenlive (kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1)) with affine or composite transitions was fine but is now broken during the time of transition it is just a white screen. The previous version was fine: kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1 But now I can't find it or install it:........

  • [1035724.274610] [drm:intel_pipe_update_end [i915_bpo]] *ERROR* Atomic update failure on pipe A (start=62076478 end=62076479) time 102 us, min 894, max 899, scanline start 893, end 900 W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1.bin


    [1035724.274610] [drm:intel_pipe_update_end [i915_bpo]] *ERROR* Atomic update failure on pipe A (start=62076478 end=62076479) time 102 us, min 894, max 899, scanline start 893, end 900 W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1.bin for module i915_bpo I've been getting those errors on a J3455 NUC box with the latest kernel on Linux Mint 18.2. When updating the initramfs I also got the error about the firmware........

  • /usr/bin/ld: cannot find -lboost_system-mt-s /usr/bin/ld: cannot find -lboost_filesystem-mt-s /usr/bin/ld: cannot find -lboost_program_options-mt-s /usr/bin/ld: cannot find -lboost_thread-mt-s collect2: error: ld returned 1 exit status make: *** [cag


    cagecoin linux compile: sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev Solution: sed -i s/"BOOST_LIB_SUFFIX=-mt-s"/"#BOOST_LIB_SU........

  • Wine uninstalled broken on Linux Mint


    Solution: Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt sudo aptitude install wine The following NEW packages will be installed: ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6 wine1.6-amd64{a} wine1.6-i386:i386{a} The following packages will be REMOVED:........

  • ffmpeg trouble concatenating similar but different files


    When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right. Solution for me: My example uses 3 videos in total so "n=3" and a=1 to include audio. ffmpeg -threads 12 -i file1.mp4 -........

  • ffmpeg Unable to Use Hardware Encoding with Nvidia 3.40 Driver and GT210 card


    I believe from what I've read that this card's driver doesn't support the features after trying all known troubleshooting methods. ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload -c:v hevc_nvenc -profile main -preset slow -rc vbr_hq -c:a copy uservideoRendered.mp4-test ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload........

  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd ffmpeg-3.3.2/ ./configure --disable-yasm install prefix /usr/local source path ........

  • OpenVZ error : Container start failed (try to check kernel messages, e.g. "dmesg | tail") Locked by: pid 166638, cmdline vzctl start 888171


    This container won't start after exhausting its memory. There are no relevant or helpful messages in dmesg or vzctl.log as well. Standard troubleshooting such as disabling PPP etc has not helped. 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Locked by: pid 166029, cmdline vzctl start 888171 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container already locked 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container was stopped 2017-07........

  • How to extract view contents of initramfs image gzip'd


    Very simple browse to your /boot directory It does make more sense to extract the image in its own directory eg "initramfs-blabla-dir" as it will literally extract directly to the pwd. cp initramfs.img someotherdir cd someotherdir zcat initramfs-3.10.0-514.el7.x86_64.img | cpio -idmv........

  • Migrate Centos 7 from Single HDD to mdadm RAID 10 array:


    Done on Centos 7.3 very important as clearly based on older guides it was a lot easier and more simpler! Hint do not use grub2-install! If you have trouble booting after this check this CentOS mdadm RAID booting/fixing guide. One huge caveat if you are an oldschool user or sysadmin who has avoided UEFIbooting The nor........

  • Centos 7 Cudaminer Nvidia setup guide


    I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us yum install automake curl openssl-devel libcurl-devel gcc gcc-c++ yum -y install kernel-devel-`uname -r` yum -y install unzip #the........

  • USB 3.0 PCI x1 Card Review VIA VL805 on Linux Review and Experience


    This is a VIA made VL805 USB 3.0 Chipset with 4-ports and MOLEX powered. First of all this unit was cheap at about only 9 USD with fast shipping. My biggest concern was if this was a quality unit and would it really give you full USB 3.0 speeds (some people reported with similar cards that for some weird r........

  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........

  • USB Device/MP3 Player not working properly and can't browse the device filesystem? Check the cable twice and again!


    Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues. Take for example the error messages from Linux Mint: [804829.895414] usb 1-1: USB disconnect, device number 11 [806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........

  • Nvidia Linux Mint/Ubuntu screentearing horizontal line solution


    Finally after ages I found the solution which is on many pages on the net but not obvious and should have been standard or more common info! Instant Solution: Type this into the terminal (unfortunately the driver config menu doesn't have the option as itis hidden): nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceCompositionPipeline = On }" Make permanent Cli........

  • Openshot 2.2 is very unstable always crashing in Linux Mint 18.1!


    Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user: Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4 Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........

  • strange vi errors in Linux Mint/Ubuntu line 58: E488: Trailing characters: t_Sbet line 63: E171: Missing :endif


    This happens on any file an even just typing "vi"whereas it never happened before. I suspect an update or environment variable is causing this issue When entering vi I get this weird stuff line 58: E488: Trailing characters: t_Sbet line 63: E171: Missing :endif When exiting vi I get this weird stuff t_Sb=^[[4%?%p1%{1}%=%t........

  • phpBB3 slow and internal dummy connection


    Using Apache 2.2 and PHP5.6 PHPBB3 is very slow to respond. Actually for some reason it takes so long to even register a log entry in access_log as in several seconds or a few minutes later it shows up in Apache. All other vhosts and Apache access stops working and freezes until the request to access PHPBB3 slowly completes. It seems to randomly be slow if you stop using it whether for posting or reading the forums. I've migrated to different machines including........

  • check if Apache uses worker MPM or prefork MPM


    apachectl -l Compiled in modules: core.c prefork.c http_core.c mod_so.c It is "prefork.c" so in httpd.conf these settings are what you would use (if you use worker.c it won't have any impact): StartServers 2 MinSpareServers 5 MaxSpareServers&nb........

  • text to speech for Linux


    espeak - is horrible and sounds very old and robotic echo "hello there"|espeak #don't know how to use mbrola and plugins cicero jovie just seems to be a graphical interface to espeak There is also sbreader/sapi Google's Text To Speech Works Quite Well #!/bin/bash say() { local IFS=+;/usr/bin/mplayer -ao alsa -really-quiet -noconsolec........

  • ubuntu Linux colour dropper picker


    gpick is a great and simple tool now that I now how to use it sudo apt-get install gpick The trick is to find "the swatch" I was in a rush and was frustrated that it wouldn't work how Iexpected and I had to memorize the hex code of the color my mouse was over. There is something it tells you to do which is "Click on the swatch area" (click onthe honeycomb graphic area that is the s........

  • Linux Ubuntu Mint how to view RAW image files .arw?


    Ijust use "ufraw" and it does the trick perfectly. Now Iwish I could figure out how to batch convert them into .jpg with ImageMagick (it seems support for .raw is not guaranteed or it has to be compiled in). apt-get install ufraw........

  • What happens when you unplug 1 or more devices from an mdadm RAID array to simulate a failure in Linux Ubuntu/Centos/Debian?


    In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below. mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore. [45817.162728] ata4: exception........

  • Centos 5 OpenSSL does not support TLS 1.2 Apache Error


    [Thu Jan 26 14:13:31 2017] [notice] caught SIGTERM, shutting down [Thu Jan 26 14:14:00 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Jan 26 14:14:00 2017] [error] Server certificate is expired: 'Server-Cert' [Thu Jan 26 14:14:00 2017] [notice] SSL FIPS mode disabled [Thu Jan 26 14:14:07 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Jan 26 14:14:07 2017] [error] Server certificate is expired: 'Server-Ce........

  • DRBD Split-brain solution


    Uh oh [17925926.174277] block drbd0: Handshake successful: Agreed network protocol version 96 [17925926.174325] block drbd0: conn( WFConnection -> WFReportParams ) [17925926.174342] block drbd0: Starting asender thread (from drbd0_receiver [1682]) [17925926.174432] block drbd0: data-integrity-alg: [17925926.174581] block drbd0: drbd_sync_handshake: [17925926.174586] block drbd0: self 2AAE66AF9252D6DB:2815BF........

  • How to Properly Secure SSL/TLS Apache Settings against Heartbleed Poodle (TLS) Poodle (SSLv3) FREAK BEAST CRIME


    Many users still are not aware but simply patching OpenSSL does not secure you against many known and easy to exploit attacks that will render your encryption useless by an attacker. Use the following setings in /etc/httpd/conf.d/ssl.conf SSLCipherSuite "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH EDH+aRSA !CAMELLIA !SEED !3DES !RC4 !aNULL !eNULL !LOW !MD5 !EXP !PSK !........

  • K9 Mail Android Cannot See or View E-mails Disappear after reading - with Dovecot server. Solution


    This actually only happened after an e-mail server ran out of space due to run away log files. Normal Desktop clients were not affected. It appeared to be a bug in K9 mail but even reinstalling/wiping all settings did not fix it (read e-mails would still not reappear). This is moreso a bug in Dovecot where it probably messes up the index files. How do you fix this in Dovecot/your e-mail server? You need to delete the do........

  • MySQLD Server shutdown remotely unexpectedly


    170110 5:35:23 [Note] /usr/libexec/mysqld: Normal shutdown 170110 5:35:23 [Note] Event Scheduler: Purging the queue. 0 events 170110 5:35:23 InnoDB: Starting shutdown... 170110 5:35:24 InnoDB: Shutdown completed; log sequence number 0 12765401 170110 5:35:24 [Note] /usr/libexec/mysqld: Shutdown complete 170110 05:35:24 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended........

  • bind/named rndc: connect failed: 127.0.0.1#953: connection refused (solution)


    service named status rndc: connect failed: 127.0.0.1#953: connection refused named (pid 10557) is running... This issue is normally caused by a permissions issue where named doesn't have the permissions to read the rndc.key. Check /var/log/messages: Jan 4 17:06:22 storagebox named[10753]: none:0: open: /etc/rndc.key: permission denied Jan 4 17:06:22 storagebox named[10........

  • ADATA SU800 256GB 3D NAND Flash SSD Test & Review


    I keep reading these drives are slower, but they are cheap and still SSDand work very fast for my needs. As you can see the sequential read is 481-491MB/s, if I put them in MDADM RAID10 mode (normal RAID1) they should give me well over 900MB/s and with redundancy and being very cheap for what they offer. [1232206.315622] scsi 8:0:1:0: Direct-Access ATA ADATA SU800&........

  • mdadm mirrored RAID1 performance using RAID10 -f2 (Far Layout) is the solution


    The only way I've found in mdadm to make 2 drives perform like a proper RAID 1 (eg. the read speed should be 2x that of a single drive) is to use the --layout=f2 (far 2). mdadm raid10 performance issues. Be very aware that mdadm seems to default to layout=n2 (which means near). In this scenario it means it is like mdadm RAID 1 performance (you get maximum read speeds of a single drive). dd if=/dev/md126 of=/dev/null bs=1M cou........

  • iptables how to forward localhost port to remote public IP


    iptables -t nat -A OUTPUT -m addrtype --src-type LOCAL --dst-type LOCAL -p tcp --dport 3306 -j DNAT --to-destination ip.ip.ip.ip iptables -t nat -A POSTROUTING -m addrtype --src-type LOCAL --dst-type UNICAST -j MASQUERADE sysctl -w net.ipv4.conf.all.route_localnet=1 Make sure you substitute "ip.ip.ip.ip" for your real public IP and also the "--dport 3306" for the port you want to forward. Finally run the sysctl command and........

  • mcp55 NIC not working at boot on Centos 6.6-6.8


    forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X forcedeth 0000:00:08.0: eth0: MSI enabled forcedeth 0000:00:08.0: eth0: no link during initialization ADDRCONF(NETDEV_UP): eth0: link is not ready forcedeth 0000:00:08.0: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Dec 1 18:21:32 box15 kernel: forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. Dec 1 18:21:32 box15 kernel........

  • Centos extremely secure iptables setup


    If you want to make sure only a certain IP can access your server for any service or protocol here is a way to do it (just be sure you have access to the IP(s) mentioned or you will be locked out). iptables -F iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp -s IP.IP.IP.IP -j ACCEPT iptables -A INPUT -j DROP serv........

  • /dev/drbd0: State change failed: (-2) Need access to UpToDate data solution


    Everytime I've seen this error "/dev/drbd0: State change failed: (-2) Need access to UpToDate data" it is because DRBD has no disk: cat /proc/drbd version: 8.3.13 (api:88/proto:86-96) GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51 0: cs:Connected ro:Secondary/Secondary ds:Diskless/Inconsistent A r----- ns:0 nr:0 dw:0 dr:0 al........

  • forcedeth MCP55 Nforce3600 Nvidia Network NIC Card Not working in Linux at 1gigabit speeds


    Now many people report this card simply not working in various Linux distros and kernels. My issue is different, it always works at 100mbit (eg. plugged into a 100mbit switch) but no matter what 1000M/gigabit switch I would try, it would never work. The link would be up (the lights were on) and the OS detected the link as being up as well but it wouldn't work at all and could not pass data in or out (not even a ack/ping). There is one simple solution and command........

  • DRBD Slow Performance - 99.99 % [jbd2/drbd0-8] highiowait solution


    Tired of checking iotop and seeing that your drbd partition is using 99.99% of io all the time and finding your drbd device performs slow in general? This is especially an issue in versions of DRBD in the 8.3 tree in particular one documented case is on "8.3.13" but it likely applies to other devices. The symptoms are that resyncing is fine and normal but any reasonable amount of activity is very slow and lagged and creates a high server load and con........

  • OpenVZ Error: Failed to load 2nd level quota solution


    Syncing private Live migrating container... Syncing 2nd level quota 11000: invalid option -- F Usage: vzdqload quotaid [-c file] commands Loads user/group qouta information from stdin into quota file. -c file use given quota file Commands specify what user/group information to load: -G grace time -U disk limits........

  • blocked for more than 120 seconds issues with iowait and timeout on Live Linux distribution while writing to physical disk


    This happened while an mdadm array was syncing, all access from writing a new blank file to opening a small .txt file was very slow: [222117.312078] kjournald starting. Commit interval 5 seconds [222117.685060] EXT3-fs (md0): using internal journal [222117.685096] EXT3-fs (md0): mounted filesystem with ordered data mode [222122.376847] kjournald starting. Commit interval 5 seconds [222122.602825] EXT3-fs (md2): using internal jour........

  • Apache Centos Stopping httpd: [ OK ] Starting httpd: [Wed Jun 29 19:29:44 2016] [warn] _default_ VirtualHost overlap on port 80, the first has precedence [Wed Jun 29 19:29:44 2016] [warn] _default_ Virtual


    Stopping httpd: [ OK ] Starting httpd: [Wed Jun 29 19:29:44 2016] [warn] _default_ VirtualHost overlap on port 80, the first has precedence [Wed Jun 29 19:29:44 2016] [warn] _default_ VirtualHost overlap on........

  • The connection was reset The connection to the server was reset while the page was loading.


    In Firefox I cannot connect to any website, proxy is disabled and outside network access is confirmed, no system or manual proxy was set on this Linux Mint/Ubuntu system. Normally this can be caused by proxy or DNS problems and the weird thing is that traceroute and ping to other IPs worked fine but even connecting to sites by IP was not working. The connection was reset The connection to the server was reset while the page was loading.........

  • Openvz kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3)


    kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3) Varying opinions are out there but in general it seems like the most common culprit is a lack of privvmpages, with a modern OpenVZ system the best way is to set privvmpages as equal to what your RAM is and this has resolved the messages on another system. If it's truly a TCP issue you can adjust the following parameters:........

  • astrachat connection problems in Android 5.01 Lollipop


    I wanted to use Astrachat because it seems to be the only app that has video, pic and file sharing for Jabber butI cannot even connect despite any other client working fine including Xabber and others. astrachat "Oops.. We can't connect to the account that you provide above. Please recheck your account detail". Unfortunately to make it worse there doesn't seem to be any error log or more details about the issue. The jab........

  • sed how to avoid escaping


    sed gets to be a pain and a real mess and is hard to read and understand when you have to escape things like / etc. Idid not realize until recently that you don't need to use / as a separator, you can use virtually any non letter or number character. Eg we have used # as the separator to avoid having to escape the forward slashes and in this way the command is plain, easy to understand, edit and saves time/hassle without the need for escaping. sed -i s#http........

  • mysql_real_escape_string returns an empty string solution


    This is a common mistake but many people do not realize this function comes from mysql itself, so therefore you need an active mysql connection open. Usually the string will be empty and null when you call it from outside of the database connection portion of your code. eg. an example of the wrong way and creating a null/empty string $var = mysql_real_escape_string($myself) mysql_connect(); // returns n........

  • Cannot Read License File cPanel Solution


    This can happen because port 80 is not open, or your license has expired and/or your IP is out of date and also if the license server itself from cPanel is having issues. In most cases as long as you have a valid license the following command will solve it: /usr/local/cpanel/cpkeyclt Updating cPanel license...Done. Update succeeded. Building global cache for cpanel...Done Cannot........

  • Centos and obfsproxy install errors


    pip install obfsproxy /usr/lib/python2.6/site-packages/pip/_vendor/requests/packages/urllib3/util/ssl_.py:90: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning. InsecurePlatformWarning You are using pip version 7.1.0, however version 8.1.1 i........

  • MySQL PHP adding a backslash/escaping apostrophes Solution


    The first thing to diagnose is what is actually in the database (use PHPMyAdmin or CLI). You will of course either find that the backslash is either in the database or not. If the backslash is in the database you probably have magic quotes gpc/runtime on and/or are calling the "addslashes()" function which does this. If you are escaping your data with mysql_real_escape_string() then think again, you probably have magic quotes gpc enabled either in php.ini or........

  • Linux Mint/Ubuntu/Debian Window Controls Missing Solution


    If Linux Mint 17 or other has no window buttons/controls you can do the following from terminal: marco --replace& Sometimes it can be fixed if you go to your themes/appearance and choose a new one but in the case like mine where Compiz is installed but not running/working then that fix will not work and will require the marco command above. What if you can't type in a terminal Window? If you close........

  • Linux Mint/Ubuntu/Debian Dual NICs networks problem when enabling and disabling one device


    The Scenario You have dual NICs and you disable NIC1 which uses 192.168.1.1 as its gateway. With NIC2 you enable it/connect it to another network which also has the gateway 192.168.1.1 Everything will work fine at this point. When switching back to NIC1 even with NIC2 disabled and even unplugged, the OS basically can't pick up the new/updated ARP entry of the old device for 192.168.1.1 and perhaps thinks it is a security risk or spoof of some sorts and blocks i........

  • Centos installing grub problems suspect gpt problem


    grub> root (hd0,0) root (hd0,0) Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) But if you do: root (hd1,0) setup (hd1) it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical). Checking if "/boot/grub/........

  • imagemagick converting jpg images to pdf file size too large


    If the file size is too large you need to resize them on the fly: convert -resize 25% *.jpg output.pdf The resize flag takes a % I have tried without and it seems to take it as pixels and becomes way too small. You can also play with the "-quality 25" flag to decrease file size even more.........

  • convert imagemagick pdf to jpg is too small when converting solution


    It is a common issue and here is the solution (increase the density/dpi): convert -density 120 some.pdf output.jpg You will need to play with the density setting to get the perfect file size and resolution. If you want a smaller file you can always use the "-quality" switch and eg. -quality 25 would be 25%/100 quality........

  • How to manually mount Linux disk image partition without using losetup


    In this case we want to mount partition #2 fdisk -lu Centos-6.6-x86_64.img You must set cylinders. You can do this from the extra functions menu. Disk Centos-6.6-x86_64.img: 0 MB, 0 bytes 255 heads, 63 sectors/track, 0 cylinders, total 0 sectors Units = sectors of 1 * 512 = 512 bytes Device Boot&nbs........

  • unfortunately lg keyboard has stopped - LG Phone Keyboard Issue


    This seems to effect many other LG phones , specifically their keyboard app and basically makes your phone unusable where you cannot use the keyboard because that message keeps popping up and the keyboard will not load. unfortunately lg keyboard has stopped solution: 1. Go to your settings and manage apps and find the LG Keyboard app: 2. Stop it from running, delete all data and clear all cache. After the above you will probably find that your........

  • Centos 6 how to guide convert LVM non-RAID into mdadm 1/10 RAID array live without reinstalling


    Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access. So in this case you add a second physical or disk or already ha........

  • Centos cannot login by console or ssh session closed immediately


    In my case I could login with the initial install but I rsync'd everything over while preserving ownership and permissions to another RAID partition and booted from that.was fine before. The problem is that you are kicked out the second you login and the problem was SELINUX for some reason (perhaps it noticed something strange when it was moved to the new partition) login: pam_unix(login:session): session opened for user root by LOGIN(uid=0) login: ROOT LOG........

  • Virtualbox errors on Ubuntu/Debian/Mint


    The solution was to reinstall the vbox dkms package and do a manual modprobe of the modules it makes. I never sorted out the unable to start due to the USB issue, I did have the guest additions installed but the only way to boot was to change the pointing device from USB to PS2 and then to disable the USB controller (if your pointing device is set as USB, disabling USB will not work because it will re-enable by default when it sees your pointing device is USB, this is w........

  • How To Install Linux Mint 17.2 on mdadm RAID with a separate boot partition


    Iwas surprised to see that Linux Mint at the latest 17.2 version still has NO mdadm installer option, and worse the installer will not be able to create a proper booting environment even when you do install it. How to setup mdadm in Linux mint LiveCD sudo su apt-get install mdadm # partition as you need and then create your mdadm devices # create your SWAP md0 mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /d........

  • status: { DRDY ERR } error: { ICRC ABRT } failed command: WRITE FPDMA QUEUED MCP55 Linux Errors


    [ 2868.041375] ata1: EH in SWNCQ mode,QC:qc_active 0x40 sactive 0x40 [ 2868.041554] ata1: SWNCQ:qc_active 0x40 defer_bits 0x0 last_issue_tag 0x6 [ 2868.041556] dhfis 0x40 dmafis 0x40 sdbfis 0x20 [ 2868.041874] ata1: ATA_REG 0x41 ERR_REG 0x84 [ 2868.042013] ata1: tag : dhfis dmafis sdbfis sactive [ 2868.042163] ata1: tag 0x6: 1 1 0 1 [ 2868.042301] ata1.00: exception Emask 0x1 SAct 0x40 SErr 0x400000 action 0x6 frozen [........

  • Centos/obfsproxy errors


    I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar: yum -y install python-pip python-devel No package python-pip available. #install the EPEL repo python-pip install obfsproxy python-pip install obfsproxy -bash: python-pip: command not found pip install obfsproxy &........

  • flypro EEPROM PLCC32 programmer software error "The device ID does not match, whether to continue operating"


    If you get that message it means you have inserted the adapter or device incorrectly. In my case the adapter needed to be at the rear end of the pins and it caused this message. Do not ignore this message as it may appear to work but you will get errors and in reality your chip will not be erased or programmed even if it appears like it is working.........

  • ssh session and port forward or reverse port matching or assocation howto


    Use netstat with the -anpe option. The e option shows the inodes and I do not know if it will always work or if it was by fluke but I was dealing with dozens of SSHsessions and needed to know which session was related to which forward (the PIDs of the SSHand SSHD did not match etc...) Notice the "59560675" and "59560762" those are almost identical, if you find two sets that are nearly identical except for the last 3 digits they may match (in my ca........

  • iptables port forwarding multiple ports to another IP


    iptables -t nat -A PREROUTING -p tcp -m multiport --dports 80,443,2068,8192 -j DNAT --to-destination 192.168.1.175 Just adjust the "--dports" to the ports you need and the --to-destination to the destination IP (note it must be on the same network as the server running iptables........

  • Weird Ubuntu Issues with NVIDIA driver/Compiz


    1.) My screensaver would take a long time to disable after hitting a key. 2.) Usually errors like below will follow. 3.) Compiz sometimes uses 100% or high CPU 4.) My window controls will disable (eg. the minimize, maximize and close buttons). It seems like Compiz or appearance/effects disable themselves. Re-enabling Desktop Effects under Appearance temporarily fixes it. 5.) high load in general from things like "Migration" pr........

  • HP XW9400 Motherboard In Desktop Issues


    Fortunately the format is EATX so an EATX case will work and the screw layout is standard. You will need to remove the HEX/TORX screws that are connecting the stock HP standoffs (meant to slide into an HP case). XW9400 Motherboard Issues Size: 12" x 13" Proprietary Power Connector Proprietary CPU Power Connector Proprietary Memory Power Connector Fan connectors are 4 pin so you will need some kind of adapter.........

  • tar do not overwrite files


    It is as simple as using the "-k" option for: -k, --keep-old-files don't replace existing files when extracting --keep-newer-files don't replace existing files that are newer than thei........

  • Dell CS24-NV7 lspci dmidecode info


    0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2) 0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3) 0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3) 0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1) 0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2) 0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 0000:00:05.1 I........

  • Dell CS24,FS12 NV5 and NV7 1U Server Information & Parts


    Motherboard: Gigabyte GA-3CESL: http://b2b.gigabyte.com/products/product-page.aspx?pid=2658#dl Dell Part Numbers for the motherboard: R1232 R1232L R2232S SERVER MOTHERBOARD GENUINE 408P9 CN-0408P9 GA-3CESL Manual Download here RAMSlots: 16 (8 controlled by each CPU) RAMType: DDR2 ECC 5300P........

  • No package fuse-encfs available. yum


    It looks like newer versions of Centos no longer have encfs so you have to compile it, only it does not work and fails so those wanting encfs should probably use any other OS which supports it better.........

  • Flash slowing down your Firefox browser? Install Flashblock plugin


    Install the "Flashblock" plugin because we all know most unwanted high CPU usage situations come from the browser usually because of a looping Flash ad taking up 100% CPU. The solution is to install the "Flashblock" plugin that doesn't allow any Flash to load and play unless you click on the placeholder.........

  • esniper and curl errors https://signin.ebay.com/ws/eBayISAPI.dll?SignIn: Couldn't connect to server: couldn't connect to host


    I kept thinking it was esniper but somehow my bash settings have a preset proxy that was creating the issue. https://signin.ebay.com/ws/eBayISAPI.dll?SignIn: Couldn't connect to server: couldn't connect to host curl manually to any URL is the same: curl: (7) couldn't connect to host Run curl with -vvvvvv mode to see the issue: curl -vvvvvvvvvv http://realtechtalk.com * About to c........

  • Vbox/Virtualbox devices grayed out for non-root user solution


    It is a permissions issue that is hard to fix. All but one USB device is greyed out. I am already a member of "vboxusers" I have already enabled and disabled USB support for the guest. I have already reinstalled the latest VBOx guest editions If running as root it all works fine Changing........

  • NS_ERROR_FAILURE (0x80004005) The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.


    The solution is to run '/etc/init.d/vboxdrv setup' and sometimes happens when upgrading VBox and the kernel modules don't get upgraded with it. Sometimes the above doesn't work until you reboot because sometimes other unknown processes (even the file manager possibly) may be locking the old module from being unloaded. Failed to open a session for the virtual machine XP. The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.........

  • Directadmin compile error solution cc: Internal error: Killed (program cc1)


    cc: Internal error: Killed (program cc1) Please submit a full bug report. See for instructions. make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1 make: *** Waiting for unfinished jobs.... Stopping crond: ........

  • Postfix Errors & Solutions "unprivileged": bad value: "???" - bad transport type:


    Aug 25 16:43:24 evohostingtor postfix/master[19471]: fatal: /etc/postfix/master.cf: line 24: field "unprivileged": bad value: "???" Solution: I had the wrong thick dashes when c&ping (just retype them with your keyboard) Aug 25 16:47:10 mailbox postfix/master[24498]: fatal: /etc/postfix/master.cf: line 25: bad transport type: syslog_name=postfix/auth-cleanup auth-cleanup unix n - - - 0 cleanup #-o syslog_name=postfix/........

  • CPanel Link to all of the command line options


    CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting.  I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts. So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........

  • Ubuntu Linux Slow/Delayed SSH ping response Solution


    I've only ever seen this in Ubuntu for some reason and it is because of the /etc/nsswitch.conf settings. So the issue is that if the hostname's reverse DNS cannot be found that you need to go back to DNS which was not the default in this nsswitch.conf file for some strange reason. Edit /etc/nsswitch.conf and replace your "hosts" line with this: #hosts: files dns mdns4_minimal [NOTFOUND=return] mdns........

  • cp ignore symlink and copy the actual file


    This can be very tricky, say you are doing development on a file that is symlinked. Doing a "cp dev.file dev.file-bk" won't do what you expect, it just links back to the same file so you haven't copied or backed anything up. You need the "-H" switch to copy the actual file that is referenced by the symlink: cp -Hdev.file dev.file-bk........

  • Acer Aspire E1-522-5603 Howto Enter BIOS - Press F2


    Press F2, you wouldn't know this because like most new computers, it doesn't announce the required key unless you enable it from the BIOS. ........

  • drbd won't create device if previous partition is on it Command 'drbdmeta 0 v08 /dev/md160 internal create-md' terminated with exit code 40


    This is what fixed it: [root@box13 ~]# dd if=/dev/zero of=/dev/md160 bs=512 count=500 Basically you need to wipe out more than just the 512 byte partition table so 512 bytes * 500 is more than enough to make DRBD happy and think the partition is now empty. The reason this happens is because it gets confused when there is a previous partition with data on the device you are using. root@box13 ~]# d........

  • heartbeat compile errors with rpmbuild


    c1: warnings being treated as errors stonith_signal.h:34: error: 'stonith_signal_set_simple_handler' defined but not used gmake[3]: *** [apcmaster.lo] Error 1 gmake[3]: Leaving directory `/root/rpmbuild/BUILD/heartbeat-1.2.4/lib/plugins/stonith' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/root/rpmbuild/BUILD/heartbeat-1.2.4/lib/plugins' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/root/rpmbuild/BUI........

  • Howto Restore Acer Aspire E1-531-4406


    Hit Alt + F10 before the system boots and you'll boot into the recovery drive and be able to restore your system, of course note that all of your data will be wiped out.........

  • Asterisk VOIP Sipura/Linksys PAP2T Calls Not Being Received Solution


    This problem seemed to happen recently but was likely causing issues before where the phone(s) do not ring. Now there are a few reasons why this can happen especially if your adapter has DND mode enabled (disable it). However that wasn't my issue and Ionly figured it out the other day when by fluke if you're on the phone (making a call) then calls will come in. That's when Ifigured out the solution: This likely app........

  • OpenVZ mismatched kernel and dev when compiling.


    ./configure ./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory Error: kernel version not found. Please make sure your kernel is configured. dr-xr-xr-x. 4 root root 4096 Feb 21 06:13 .. lrwxrwxrwx 1 root root 45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25 drwxr-xr-x 2 root root 4096 Feb 12 20........

  • CPanel Apache httpd won't start solution: Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf: Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration


    root@hkhosting [/]# service httpd start Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf: Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration ........

  • Centos Howto Upgrade to PHP 5.3 from 5.2


    It's not as simple as "yum install" as you can see below and it doesn't stop there. yum install php53 Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: mirror.us.leaseweb.net * extras: centos.mirror.rafal.ca * updates: centos.mirror.nexicom.net * base: centos.mirror.nexicom.net * addons: centos.mirror.nexicom.net Setting up Install Process........

  • Linux Centos 6 Weird Kernel Panic


    Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tained: 3.2.51-3.el6.x86_64 #1 Call Trace: panic+0x8c/0x1a2 forget_original_parent+0x34d/0x360 exit_notify+0x12/0x140 do_exit+0x1d8/0x400 do_group_exit_+0x50/0xc0 sys_exit_group+0x12/0x20 system_call_fastpath+0x16/0x1b panic occurred, switching back to text console........

  • Asterisk iptables block bruteforce attacks howto with fail2ban


    yum -y install fail2ban vi /etc/fail2ban/jail.conf [asterisk-tcp] enabled = true filter = asterisk action = iptables-multiport[name=asterisk-tcp, port="5060,5061", protocol=tcp] sendmail-whois[name=Asterisk, dest=you@example.com, sender=fail2ban@example.com] logpath = /var/log/asterisk/messages maxret........

  • kvm centos cannot compile error


    ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install gcc make ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install compat-gcc-* ./configure Error: Could not find alsa Make sure to have the alsa libs and headers installed. yum -y install alsa-lib-devel ./configure........

  • KVM on Centos 6.3 cannot boot FreeBSD 9.2 AMD64


    On the same OS with the same kernels basically I cannot boot FreeBSD installer, I believe the issue is the host CPU. One host runs an Intel and works, while an Opteron 2373 does not work despite suggestions from this thread: http://149.20.54.209/showthread.php?t=36761 I've tried cpu options like "kvm64" "Opteron_G3" and none........

  • Linux find what processes are swapping


    Here is a handy script that will check all processes and report what is swapping #!/bin/bash for pid in `ps x|awk '{print $1}'`; do result=`cat /proc/$pid/status|grep VmSwap|awk '{print $2}'|grep -v ^"0"` if [ ! -z "$result" ]; then programresult=`ps x|grep $pid|grep -v grep` if [ $? == 0 ]; then program=`echo $programresult|awk '{print $5}'|grep -v ^grep`........

  • Openvz OOM Centos Issue Memory Config Settings Solution


    Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux even setting privvmpages to a specific setting DOES not affect "free -m" in containers. This is probably a kernel issue 23:36:29 up 159 days, 7:12, 4 users, load average: 0.42, 0.44, 0.33 [root@box13 ~]# free -m total&n........

  • Dell SAS 6/ir Cards are just LSi 1068E cards


    02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) 03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) Basically these cards are a stripped-down version of Dell Perc 6/i only they (SAS 6/ir) support JBOD. The DellPerc 6/i are basically useless because it doesn't have JBOD support and requires software or BIOS commands to add or remove........

  • CPanel suhosin install failed


    /scripts/phpextensionmgr install PHPSuHosin Updating md5sum list Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)... Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........

  • Linux howto resize image with Imagemagick


    convert check.png -resize 25%x25%! check-resize.png You can use a percentage or pixel sizes.........

  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........

  • Dell Perc 6/i SATA benchmarks without battery


    The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results. This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane. Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: N/A De........

  • Dell Perci 6/i Firmware Upgrade Guide Tutorial


    One thing to remember is that you need MegaCli to do the flashing. You also need the correct file,I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli(they were really the wrong version). I have an external PCI-E Dell 6 Perc/I butI chose images from the 'Integrated" on motherboard version as it was allI could find. They are different, and below is my first time finding success.........

  • Dell Perc 6/i cannot downgrade


    I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally. I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN --2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN Resolvi........

  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........

  • pxe-32 tftp open timeout


    pxe-32 tftp open timeout The solution was to enable tftp in xinetd with "chkconfig tftp on". See the troubleshooting below: chkconfig --list NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off&n........

  • Linux copy file and not just the symlink, How-To/Solution


    cp -L index.php index.php-2013-08-21 The -L switch is what you need because it's a huge issue if you think you've copied a file for backup purposes but it really just creates a symlink to the original file.........

  • Brand new WDD 500GB Blue 3.5 SATA Drive Dead After Shipping


    These drives seem to die very easily during shipping: sd 0:0:0:0: [sda] Unhandled error code sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] CDB: Read(10): 28 00 18 8b 65 e0 00 00 08 00 end_request: I/O error, dev sda, sector 411788768 sd 0:0:0:0: [sda] Unhandled error code sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] CDB: Read(10): 28 00 18 8b........

  • MySQL HowTo Copy Duplicate a Table for backup purposes


    This is a great way to test and experiment without risking your current table, or to make a backup of your current table to avoid corruption or dataloss due to malicious activity eg. deletion etc.. There are two steps and two commands 1.)Copy Table Structure "cars_backup" is the new table and it will be a copy of the table called "cars"........

  • WD 20EARX Dead Again


    Another new drive bad from the start: Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC } Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........

  • WD 20EARX 2TB Bad within days


    This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad. ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0 ata1.00: irq_stat 0x40000008 ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/00:00:........

  • KVM Guest Network Not Working Can't Ping ETC Solution


    Once I set a new MAC address everything was fine and finally anything can be pinged etc.., I've had this happen with many clients in different datacenters on different hardware.........

  • Country List Names in HTML Select From


    This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others: Choose CountryCanadaJapanUnited StatesUnited KingdomAfghanistan........

  • Starting MySQL. ERROR! Manager of pid-file quit without updating file. - Solution/How To Fix


    service mysql start Starting MySQL. ERROR! Manager of pid-file quit without updating file. Solution killall -9 mysqld_safe killall -9 mysqld service mysql start Starting MySQL SUCCESS!........

  • Kernel panic - not syncing: Attempted to kill init! Pid: 1,comm: init Tained: G I------------- 2.6.32-358.el6.x86_64 #1 Call Trace: [] ? panic+0xa0/0x16f [] ? do_exit+0x862/0x870 [] ? fput+0x25/0


    Kernel panic - not syncing: Attempted to kill init! Pid: 1,comm: init Tained: G I------------- 2.6.32-358.el6.x86_64 #1 Call Trace: [] ? panic+0xa0/0x16f [] ? do_exit+0x862/0x870 [] ? fput+0x25/0x30 [] ? do_group_exit+0x58/0xd0 [] ? sys_exit_........

  • Samsung Galaxy Note I717M Canadian Version, Root and Unlock


    I chose this because I heard a lot of stories about scams and that many providers I contacted said they can't unlock the Canadian I717s (one said "my Bell server" is down). This method worked perfectly on my Bell I717M and should work for all I717 in Canada, I was able to insert a foreign SIMcard. This will work abroad too but remember entering CWM mode is different for I717's in other countries (at least theUS). Step 1 - Root + CWM........

  • Bad Hard Drive Slows Down Computer


    Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........

  • Centos 6 RTL8111/8168B r8169 link up and down error solution/fix


    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) For whatever reason it seems the r8169 driver that ships and has shipped with most Linux distros for years is still flawed and does not work properly on these cards, causing 100mbit connectivity when it should be 1gbit and even worse, causing random network dropouts. The r8169 driver in Linux kernels is simply not meant to be used on th........

  • KVM support Ubuntu 12.04 or 12.10


    This seems to be a verified bug on KVM with no solution. I wasn't able to get through the installer with Ubuntu 12.04, it would crash while "configuring apt". I was able to install it with Ubuntu 12.10 but it crashes randomly at times. This happens with the latest Centos 6.3 kernel and KVM package, I even compiled the latest version from the KVM website and used that, but the results are still the same. Here's some links to discussion about the bugs:........

  • Samsung 4GB 1Rx4 DDR2 PC5300F FBDIMM Running Hot


    sensors|head i5k_amb-isa-0000 Adapter: ISA adapter Ch. 0 DIMM 0:+115.0C (low = +127.5C, high = +127.5C) Ch. 0 DIMM 1: +63.5C (low = +127.5C, high = +127.5C) Ch. 0 DIMM 2: +61.0C (low = +127.5C, high = +127.5C) Ch. 1 DIMM 0: +65.0C (low = +127.5C, high = +127.5C) Ch. 1 DIMM 1: +75.0C&........

  • Startech SV1107IPEXT KVM/IP Review


    Let's keep this simple, it's horrible, not only is the picture quality horrible (it's not a big deal) but the keyboard input is an issue. You have to type slowly, lightly and carefully otherwise 1-keystroke could end up being dozens of keystrokes. It's also a confusing unit for many datacenter techs, I've seen these units hooked up wrong and the instructions themselves aren't clear. I had to resort to shipping one to my office and take my phone pictures of the setup for th........

  • How to Encode all VOBs from a DVD/Bluray VIDEO_TS folder into an XVID


    In my case I already copied the VIDEO_TS folder to my hard drive. Here is the command for mencoder: mencoder -dvd-device "myvideobackup/VIDEO_TS" dvd:// -ovc xvid -oac mp3lame -lameopts cbr:br=128 -xvidencopts pass=2:bitrate=-700000 -o myvideobackup.avi Replace "-dvd-device myvideobackup/VIDEO_TS" with the location of your backup files or the /dev device of your DVD drive. The -o myvideobackup.avi is of course the name o........

  • KVM compilation issue/solution - Disabling PIE due to missing toolchain support glib-2.12 required to compile QEMU


    qemu-kvm-1.2.0]# ./configure Disabling PIE due to missing toolchain support glib-2.12 required to compile QEMU Solution install glib2 *Don't confuse glib2 with glibc, they are different and it may catch some off guard. yum -y install glib2* After that KVM should compile and install just fine.........

  • postfix how to send to multiple recipients default limit of 1000


    The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.5.3 Error: too many recipients. We set this in main.cf: smtpd_client_recipient_rate_limit=0 We didn't specify it before and the default is said to be 0/unlimited and it still didn't change anything.........

  • Samsung Galaxy Note Upgrade to ICS 4.0 microSDHC card not detected/dataloss after upgrading - possible solutions


    I backed up everything in the /mnt/sd_card directory thinking that some dataloss could occur for some reason but purposely left my microSDHC unbacked up thinking that "it won't touch that since it's external" and Samsung's and other manufacturers website even say this (that it won't be affected and not to worry etc). Apparently I was wrong, my microSD was "undetected" and asked to be formatted after the upgrade (there goes 3-months worth of family photos). No........

  • Centos how to upgrade from PHP 5.2 to 5.3 without downtime


    This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server). You may need to upgrade to PHP5.3 to run Joomla or many other reasons. Your host needs to use PHP 5.2.4 or higher to run this version of Jo........

  • MySQL Authentication fails after Upgrade to Version 5.5


    ERROR 1045 (28000): Access denied for user 'contentmanager'@'localhost' (using password: YES) For fun I thought I'd reset the password: GRANT ALL ON thecontent.* TO contentmanager IDENTIFIED by 'dfdfsdfdsfsdfsd'; ERROR 1470 (HY000): String 'contentmanager' is too long for user name (should be no longer than 16) This is ridiculous that this new version has some bizarre 16 character username limit and not only that but i........

  • mdadm how to add a device to an array after a failure


    This array is a RAID 1 and in this case 1 of the 2 drives failed (a WD drive and I've found them to be the weakest and most unreliable of any brand and are easily damaged/DOA when shipping them). mdadm --manage /dev/md0 --add /dev/sdb1 The above assumes the array you want to add to is /dev/md0 and the device we are adding is /dev/sdb1 *One thing to remember is to make sure the partition you are adding is the correct size for the array. You can also g........

  • Windows Secret Hidden Temp Directory to free out of disk space issues


    Replace "Administrator" with your username. C:Documents and SettingsAdministratorLocal SettingsTemp Ihave often found several gigabytes of temporary files in there! Just be warned that they may not all be deletable if the files are being used by open programs (so close everything you can). This helped me in a pinch many times when for apparently no reason gigs of disk space are being used for an unknown reason.........

  • MySQL how to copy/duplicate a table


    CREATE TABLE articles_backup LIKE articles The code above creates a new table called "articles_backup" which has the exact same structure and attributes as the original articles table. CREATE TABLE articles_backup SELECT * FROM articles; The above code does the same thing as the first example, BUT it also copies all of the data.........

  • Error code: sec_error_unknown_issuer Solution Valid SSL Certificate Throwing Error in Firefox


    So you've just purchased your SSL cert, renewed it and installed it or maybe you've had it installed and working fine all the time with all other browsers but you've upgraded to a recent version of Firefox and suddenly get the warning "Error code: sec_error_unknown_issuer" error. This is terrible since if you bought an SSL cert, you are most likely using it for trust purposes for your business and obviously that message will scare away most potential customers.........

  • failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)


    [ 12.460014] ata1: SRST failed (errno=-16) [ 17.626677] ata1: link is slow to respond, please be patient (ready=0) [ 22.480011] ata1: SRST failed (errno=-16) [ 27.646681] ata1: link is slow to respond, please be patient (ready=0) [ 38.106817] ata1.01: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 48.266676] ata1: link is slow to respond, please be patient (ready=0)........

  • pcnet32: eth0: transmit timed out, status 97fb, resetting - NIC card problem solution


    I've encountered this problem before and I believe it may affect other drivers (I could test but I don't have time). This was happening on my custom Linux system with the pcnet32 driver. pcnet32: eth0: transmit timed out, status 97fb, resetting (and some other kernel module tracing in dmesg) Basically it means the card is connected (it shows connected in full duplex etc.. and recognized if the cable is disconnected too) but no packets can be sent or received........

  • Could not display "trash:///". Error: DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout


    Could not display "trash:///". Error: DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Please select another viewer and try again. This happened in Ubuntu but only because I was trying to delete millions of files at once and i........

  • SSH error slow login debug1: An invalid name was supplied Cannot determine realm for numeric host address - Solution


    debug1: An invalid name was supplied Cannot determine realm for numeric host address debug1: Local version string SSH-2.0-OpenSSH_4.3p2 Debian-9etch3 debug1: An invalid name was supplied Cannot determine realm for numeric host address debug1: An invalid name was supplied A parameter was malformed Validation error Solution, disable auth from the ssh client (this is a client side error)........

  • How To Install CPanel


    wget -N http://httpupdate.cpanel.net/latest;sh latest That one command above will do it all (and it takes a long time to install/compile). After that you can access CPanel with your root login information by visiting https://yourdomain-or-ip.com:2087 I personally don't like CPanel (bloated, full of bugs, no shared SSL, difficult to use etc..)but I admit it's easier to install than........

  • The Importance of a High Quality Power Supply/Power Supplies To Prevent Overheating/System Crash/Hardware Damage


    For years I've always built cheap systems believing that there is little difference in more expensive components when it comes to reliability and quality, I generally believe this still except for Power Supplies. I've always bought cheap cases with nice sounding 350-550W stock/cheap/crap power supplies and haven't had any issues for the most part until recently. One such case is an NGEAR case with a 550W Optimax power supply, I always read that these supplies don't produce the........

  • Asus VE247H 23.7" Inch LCD/LED Backlit Monitor Dead/Stuck Pixel Policy Complaint


    I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen. I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........

  • Xen non-HVM container won't work/boot anymore


    One of my test Centos 5 containers was on a partition that filled up and it threw all sorts of errors and stopped responding but now I can't boot it again anymore. All the console shows is the Linux Penguin on the top left corner and the xm console says "usbcore: registered new driver hub" and has halted there. Centos 5 Xen container stuck/frozen won't boot on "usbcore: registered new driver hub" Another great way of troubleshooting is booting fro........

  • Ubuntu 10.04 Flash Videos have tearing/lines Solution


    This is what I call a ridiculous bug in compiz that causes it. The solution/To fix it just install "compizconfig-settings-manager" Open it up and Navigate to General Options -> Display Settings Set the "Refresh Rate" to the current refresh rate of your monitor. For ATI cards with slow window dragging/response supposedly disabling "Sync to VBlank" fixes that but otherwise leave it as is.........

  • Ubuntu 10 Nvidia Drivers Not Updated After Kernel Update Solution/How-To Manually Rebuild nvidia kernel modules for Ubuntu


    I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene. This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately). The most common reason may be that "linux-source" hasn't been installed automatically on my system. I tried to manually reinstall the........

  • What's Needed To Fix Linux


    I really am a Linux fan but my comments here may not show it. Although I'm quite familiar with Linux CLI to administer servers, I find Linux GUI OS's like Ubuntu at times very clunky. This is partially because there's no such thing as a "self-made" Linux from scratch where the UIwas designed by a single team. Linux is made up of several different projects that are generally completely separate and this lack of integratiion is a key issue that makes things f........

  • postfix lopback error solution


    This is the mail system at host mail.postmail.com. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. &........

  • Ubuntu Suspend Solution Fix blank screen laptop/computer won't come back


    Even in new versions of Ubuntu this happens but for me I found out it was because of one feature under "Power Management". I had "Spindown hard disks when possible" ticked, after disabling that, my computer wakes up from suspension every time now. So if your computer won't unsuspend with any version of Ubuntu/*Nix try disabling the spin down hard disk option as it's obviously the culprit for many situations.........

  • Linux Kernel Panic Messages - Symptoms of bad RAM module/stick


    These were caused by a bad stick of Corsair RAM [] free_hot_cold_page+0xfc/0x150 [] __pagevec_free+0x14/0x1a [] release_pages+0x127/0x12f [] __pagevec_release+0x15/0x1d [] __invalid_mapping_pages+0x120/0x156 [........

  • Hitachi HDD/Drive RMA Process Experience


    The first Hitachi Deskstar 2TB 5K3000 drive I bought arrived DOA for whatever reason (not recognized by the BIOS or OS). Perhaps it was shipping since I bought only 1 hard drive. When I bought 4 through another Vendor, all 4 checked out fine. I was worried about the RMA process because a lot of people have complained about Hitachi taking weeks to send out their hard drive and almost implied the warranty is useless. I'm happy to report that my experience was great a........

  • convert carat ^M/M Windows based text files to Linux


    carat M isn't this symbol ^ that you think, it can only be produced by typing "Ctrl-v, Ctrl-m". That you might see in text files saved from Windows. tofrodos is the package that has dos2unix which is basically the same scripts that replace ^M with /n tofrodos is the Debian/Buntu package name which has the dos2unix and unix2dos binaries........

  • Openvz Container IP not working suddenly Solution


    This may not apply to everyone but here is what happened to me. One day my IP connectivity for one container went dead, I could ping the hostnode from it and the hostnode could ping it but there was no external routing. I restarted the network service but it didn't help. I checked the routing table inside the VPS and the host and everything looked normal. Iadded another different IPon the same subnet to the container and it worked. Right away I st........

  • Linux Out of Memory OOM Object Killer Solution "Out of memory: kill process 1955 (sshd) score 81 or a child"


    I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM. I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives? Also no swap space was ever used! cat /proc/s........

  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........

  • smart is not smart, it thinks a dead drive is still good


    I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior: === START OF INFORMATION SECTION === Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZ20139 Firmware Version: 50.0AB50 User Capacity: 2,000,398,934,016 bytes Device........

  • Openvz YUM Error Solution to "[Errno -1] Metadata file does not match checksum Trying other mirror."


    It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work. I only get this error with the openvz.repo and not others such as Centos-Base.repo With my other server it works normally: ================ Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........

  • Hitachi 2TB HDS5C3020ALA632 drive DOA


    I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead): ata1: link is slow to respond, please be patient (ready=0) ata1: softreset failed (device not ready) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: link online but device misclassified, retrying ata1: link is slow to respond, please be patient (ready=0) ata1: softreset f........

  • How to recover from dead DRBD partition/hard drive in two simple commands


    This assumes that you've at least created the correct partition for your DRBD already. Notice that I am "diskless", that's because either your DRBD partition doesn't exist/has been renamed (eg. sdb becomes sda when sdb dies and you reboot) or because that drive is really actually dead/gone. *If you need to permanently change the partition/device for your resource be sure to edit /etc/drbd.conf on both hosts and reload the config. (replace r0 with........

  • Kernel/make compilation time and how to improve compile times/compile the Linux kernel faster without hardware upgrades


    I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though. There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........

  • Virtualbox Guest Hang/Freeze Ghost Zombie VM Machine Problem/Solution


    Virtualbox hang problem A VM just froze and wouldn't close so I had to force it, but the VBox GUI thinks it's running even when I close it. I manually killed the related process by doing ps aux|grep VirtualBox and found the PID 6191 I killed it with "kill -kill 6191" but it remains open and as "defunct" so I can't restart it because the GUI freezes when I click on it because it thinks it is running still........

  • Apache High CPU Usage Enable Mod_Status Guide Solution - Find Cause of High CPU Usage Script/Domain


    mod_status is a great way to track down the source of high CPU usage and to find what vhost/script is the cause of it. It gives you a live view of bandwith usage, CPU usage, and memory usage broken down by domain/vhost and script/URI. Enable mod_status vi /etc/httpd/conf/httpd.conf ExtendedStatus On SetHandler server-status Order Deny,Allow Deny from all All........

  • htaccess modrewrite problem with rewriting url with- dashes solution


    I was getting frustrated with trying to write a simple URL like this: /example-withdash I used the htaccess code like this: Rewriterule ^example-withdash$ / [R=301] I also tried escaping the dash which I thought should have treated it as a literal but that didn't work either: Rewriterule ^example-withdash$ / [R=301] But it wouldn't work, apparently the "-" dash means don't substitute,........

  • encrypt bash scripts to hide source code


    http://www.datsi.fi.upm.es/~frosal/ SHC is a program written by the author above that does just that, it's a great little tool to have. Some have said it isn't exactly encrypting the code but just making it hard to read by obfuscating the code. There was also a good discussion about that here:........

  • monit example tutorial how to enable status checking and manipulation


    You need to enable the httpd daemon with monit to actually view the status and control, it's not only for the web interface since the httpd is theONLY way of controlling monit and viewing the status. monit monitor all will also reinstate disabled services if they've timed out too much. Just restarting the service will do nothing to re-monitor a service that monit has stopped monitoring due to too many failures. *Also note that /etc/monit.conf i........

  • diff: memory exhausted


    I don't have a solution other than to use rsync, I used diff on about 1.7TB of data which includes hundreds of thousands if not millions of small files to ensure nothing was missing or corrupt. diff didn't even get past the first large directory without spitting that error out. Keep in mind I used "diff -r" because that means recursive, otherwise it wouldn't compare all files and subdirectories and would be a false way of doing it.........

  • 2011 Best Laptop - HP 15.6" Laptop featuring AMD Athlon II P340 Processor (G62-420CA)


    My mother needed a new laptop and I recommended her the same one I would have bought myself or my wife, that means the cheapest possible laptop with the most features for the money. This HP shines at this price point and one thing that made me stay away from buying more and recommending HP/Compaq was the poor battery life. Not anymore, this model has an industry leading up to 4 hours of battery life. Key Factors for Choosing It: HDMI Out........

  • Convert PDF to JPG/JPEG without low resolution/small picture size


    convert -density 400 somepdf.pdf -scale 2000x1000 output.jpg The key is the "-density 400" switch and also -scale 2000x1000 To give credit I found the solution here: http://www.imagemagick.org/discourse-server/viewtopic.php?f=1&t=10928 That was the perfect solution when I was frustrated with how small the resulting JPG's resulted. I'm sure this will help a lot of people when it comes time to converting a PDF to JPG which I'm amazed Imag........

  • Yahoo Mail (email) DNS Server Out Of Date Problems


    I don't expect this to be solved soon but some of Yahoo's DNS servers are out of whack. I changed the IPs of some nameservers of some domains and now most Yahoo users can't e-mail to those domains! As you can see below by the "No MX or A records for mychangedomain.com", now Yahoo's DNS/mailserver DNS cache is wrong. You would think they would at least have cached the old incorrect records, but instead for some reason their DNS cache has no entry and doesn't seem........

  • Linux High IOWAIT updatedb can't be killed and crash with mdadm


    high IO wait 424 root 39 19 1900 848 552 D 0.0 0.0 0:00.91 updatedb root 424 0.0 0.0 1900 848 ? DN Mar11 0:00 /usr/bin/updatedb -f sysfs?rootfs?bdev?proc?cpuset?binfmt_misc?debugfs?sockfs?usbfs?pipefs?anon_inodefs?futexfs?tmpfs?inotifyfs?eventp........

  • Santrex Review Scam Complaint - Stole My Money Fraud


    Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support admitted the server was not working and to wait for 24 hours. I waited for 4-days, after which they sent an e-mail saying my service was being disabled for SPAM ...(when SolusVM shows 0kb of traffic). Th........

  • Virtualbox - Failed to open a session for the virtual machine XP. AMD-V is being used by another hypervisor. (VERR_SVM_IN_USE). - Solution


    Failed to open a session for the virtual machine XP. AMD-V is being used by another hypervisor. (VERR_SVM_IN_USE). VirtualBox can't enable the AMD-V extension. Please disable the KVM kernel extension, recompile your kernel and reboot (VERR_SVM_IN_USE) Solution - Unload KVM module (you can't use two hardware virtualization suites at once) sudo rmmod kvm_amd kvm........

  • Apache MPM worker vs prefork


    find what MPM Apache is using, it will either be using "worker" or "prefork" apachectl -l Compiled in modules: core.c prefork.c http_core.c mod_so.c In my case it is "prefork" vi /etc/httpd/conf/httpd.conf Find the section that looks like this (by default one will normally exist for prefork and for worker, but in my case I only care a........

  • Linux - mptbase/MPT Fusion LSI Logic Error mptbase: ioc0: ERROR - didn't initialize properly! (-1)


    kernel 2.6.27.54 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 mptbase: ioc0: Initiating bringup mptbase: ioc0: WARNING - Unexpected doorbell active! mptbase: ioc0: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000001! mptbase: ioc0: ERROR - Diagnostic reset FAILED! (102h) mptbase: ioc0: WARNING - NOT READY! mptbase: ioc0: ERROR - didn't initialize proper........

  • VPS Server Scam/Review/Complaint List


    These are the only two I've encountered but here is the low-end and note my story is not at all unique. In my case I was scammed out of money and did not receive any service at all from either company. Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support adm........

  • Enable SPAMASSASSIN on Postfix in 5 minutes


    Centos 5 Postfix and SPAMASSASSIN Tutorial yum install spamassassin chkconfig spamassassin on vi /etc/mail/spamassassin/local.cf ############## #required_hits 5 #report_safe 0 #rewrite_header Subject [SPAM] #5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives require........

  • ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory solution


    ls ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory This is not an ldd problem or case of anything missing, this only happened after I upradedUbuntu. declare -x PATH="/home/user/bin:/usr/local/bin:/usr/bin:/bin:/usr/games" "/home/user/bin" is the problem! It's weird because I have no idea how it happened.........

  • Amarok won't play songs, keeps skipping to the next


    Amarok won't play songs, keeps skipping to the next Some say install install phonon-backend-xine but it was already installed automatically, obviously that's not the problem or solution. Settings -> Configure Amarok Playback: Configure Phonon Audio Output: Music It should show your different audio interfaces, choose Pulse Audio and move it to the top of the list, do the Apply, OK and manually quit Amarok (remember to close it from the tra........

  • sshfs cannot unmount error: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))


    umount: /home/diret/mount: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) I tried everything (fusermount -u) to unmount it but the only thing that worked was actually doing this: ps aux|grep sshfs Then I identified the sshfs connection and did: kill -kill pid........

  • Thunderbird/MBOX to IMAP/Maildir migration done easy with mb2md


    Convert MBOX Mail files into Maildir using Linux *You need perl an the TimeDate module Get the free Perl script mb2md from the project/author's site: wget http://batleth.sapienti-sat.org/projects/mb2md/mb2md-3.20.pl.gz gunzip mb2md-3.20.pl.gz #remember you need timedate or you'll get this error: ./mb2md-3.20.pl Can't locate........

  • email server messsages rejected without reverse DNS DNS check failure Client host rejected: cannot find your reverse hostname Cannot resolve PTR record


    Basically you should always be 100% sure that whatever IPyour mail server sends out with has reverse DNS/PTR records. Remember that unless you own your IPs then you won't be able to set your own reverse DNS. Even if you were to create a reverse PTR record on your DNS servers it will be ignored. Reverse DNS is queried to pre-assigned DNS servers of your ISP, so therefore you'll need to contact your ISP/Colo/Hosting provider to do a reverse DNS entry. If you don't have........

  • Dovecot Enable SSL/TLS with your certificate


    Dovecot enable SSL (by default it uses an old expired cert if you choose pop3s and imaps as protocols) =================== Create Cert & Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key mkdir /etc/mailssl chmod 700 /etc/mailssl cp server.* /etc/mailssl Edit /etc/dovecot.conf ssl_cert_file = /etc/mailssl/server.crt s........

  • CPU #1 not responding - cannot use it.


    I think this will be useful to others because I have a server that kept crashing mysteriously during intense disk usage/RAID checks. It would only crash during the weekly RAID integrity check. ThenI noticed during a reboot that not all CPUs were being brought up, as a result this actually creates much higher temperatures with the output I got from sensors, just booting the system produced higher than normal temperatures. You can imagine that a full blown RAID check........

  • Openvz Disk quota exceeded inode problem with free space


    Openvz problem, it is confusing because it's an inode issue and there is enough free space. cp: cannot create regular file `forums/memberlist.php': Disk quota exceeded /dev/simfs 60G 20G 41G 33% / none 2.0G 4.0K 2.0G 1% /dev........

  • mysqldump does not include CREATE DATABASE statement


    mysqldump does not include CREATE DATABASE statement you need the --databases option "--databases" is misleading, it implies in the documentation that this is a list of databases to be dumped, it should be clear that uses this command in conjuction with dumping a single database also adds CREATE DATABASE and is the only way to get the database to automatically create itself.........

  • Ubuntu 9.04 Crash


    CPU/Kernel/MB/RAID problem? Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168] Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........

  • ERROR! MySQL manager or server PID file could not be found! ERROR! Manager of pid-file quit without updating file.


    I found the cause of this issue was from all the diskspace being used but clearing it was not enough. Iguess the tables became inconsistent when space ran out and myisamchk is what fixed the rest. service mysqld restart ERROR! MySQL manager or server PID file could not be found! ....................................................................................... ERROR! Manager of pid-file quit without updating file. se........

  • Installing Webmin & Enabling SSL


    Webmin Setup Centos 5: wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet [1] 24229 [2] 24230 [root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html Resolving downloads.sourceforge.net... 216.34.181.........

  • crontab/cronjob running multiple times at the wrong time


    crontab not working It is running as user Apache I've tried 0 0 * * * (which means midnight 00:00) and it does run at midnight but also 13:25 for some reason? 25 0 * * * with this it runs at 00:25 but again also at 13:25 Solution - Restart the Cron Service (especially if you changed your time/timezone) *Update I had a suspicion that changing the timezone a few weeks ago caused this. I restarted lhe cron service and the problem h........

  • SSH delay problem UseDNS and disabling GSSAPI does not help


    The normal solution doesn't help or apply here: ssh -v user@192.168.5.41 OpenSSH_4.3p2 Debian-9etch3, OpenSSL 0.9.8c 05 Sep 2006 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.5.41 [192.168.5.41] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: i........

  • Linux Realtek Gigabit NIC huge/high latency problem after sleep?


    That is pinging to the gateway IP on the same switch, the same IP is pingable externally without any problems which makes me think the switch is fine. 64 bytes from 55.55.55.55: icmp_seq=4 ttl=255 time=1.07 ms 64 bytes from 55.55.55.55: icmp_seq=1 ttl=255 time=3536 ms 64 bytes from 55.55.55.55: icmp_seq=2 ttl=255 time=2536 ms 64 bytes from 55.55.55.55: icmp_seq=3 ttl=255 time=1536 ms 64 bytes from 55.55.55.55: icmp_seq=8 ttl=255 time=1.20 ms 64 by........

  • How to see what's inside your gziped CPIO'd initrd image


    Copy the initrd to somewhere else, say /tmp: mv initrd.img to initrd.gz *the mv to .gz is needed otherwise gunzip won't work/it will refuse to operate without the correct .gz extension gunzip initrd.gz cat initrd | cpio -idmv The last command extracts the contents of initrd to your present working directory. For 7z .lz initrd........

  • Ubuntu/Debian DRBD 8.0 Setup Guide


    I've only used it on Centos, soI thought I'd make a quick Debian guide: Install the DRBD Package apt-get install drbd8-utils Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libswfdec-0.8-0 Use 'apt-get autoremove' to remove them. The following........

  • VirtualBox Convert Import/Boot .vmdk VMWare Hard Disk/Drive Image Won't Work


    I wanted to Import/Use a .vmdk hard disk image file from VMWare. Generally you can just "point" VirtualBox to it and use it and it will work but I found an exception. One of my Centos 4.4 x64 images wouldn't boot. I had two copies, an older one and the newer one. The older one booted as normal (once I changed the VirtualBox driver to IDE from SATA). The newer one stopped at the "GRUB loading" message no matter what I tried. As far as........

  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........

  • WD EARS/Green 2TB Cannot Disable Power Saving/Head Parking with hdparm


    hdparm -B 255 /dev/sdb /dev/sdb: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well). -S set standby (spindown) timeout hdparm -S 251 /dev/sda /dev/sda: setti........

  • WD (Western Digital) Advanced Format Drive Lagged/Slow Speed/Performance/Design Flaw EAD/EARS problem WDC WD20EARS-00S8B1


    Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive. This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series. To make it worse this is also when Western Digital introduced "Advanced Format" o........

  • Ubuntu 10.04/GRUB2 mdadm won't boot


    Moving to RAID was a pain. What you have to do is the following from an existing install: Install mdadm Create your mdadm RAID 1 array on your spare hard drive. Start it with the missing disk. rsync the entire contents of your current / to the md partition. Here's a good way of doing it: rsync -Pha --exclude=/proc/* --exclude=/sys/* --exclude=/mnt/* /. /mnt/md2........

  • EOL for Kubuntu/Ubuntu 8.04 - W: Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/intrepid/universe/source/Sources.gz 404 Not Found [IP: 91.189.92.171 80]


    I couldn't figure out whyI couldn't install a simple package. This is what's annoying about cutting edge Debian distros, yes we know you support each license on average for 1-2 years but why take down the supporting binary packages and basically disable the older versions? sudo apt-get install update Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find p........

  • PHP Email Attachment Corrupt Solution


    I couldn't figure out why this wouldn't work, a test script in the root of my htdocs folder worked fine. Within some subdirectories the same code would produce different base64 results but I didn't know hwy. Archive: /tmp/archive.zip Zip file size: 6888 bytes, number of entries: 92 error [/tmp/archive.zip]: missing 242827681 bytes in zipfile (attempting to process anyway) error [/tmp/archive.zip]: attempt........

  • Nautilus/GNOME File Manager handy list of extensions


    nautilus-gksu - privilege granting extension for nautilus using gksu nautilus-sendto - integrates Evolution and Pidgin into the Nautilus file manager nautilus-share - Nautilus extension to share folder using Samba nautilus-actions - nautilus extension to configure programs to launch nautilus-bzr - Bazaar (bzr) integration for nautilus nautilus-cd-burner - CD Burning front-end for Nautilus nautilus-clamscan - Antivirus scanning for Nautilus n........

  • PHP CURL SSL won't work or connect


    I spent so much time debugging this, most sites don't tell you a very important option to use with CURL and you will only find out this is the problem by running the PHP script from the command line you get the following output that shows the issue (I don't see any way to get this output from Apache itself). * About to connect() to ip.ip.ip.ip port 25000 * Trying ip.ip.ip.ip... * connected * Connected to ip.ip.ip.ip (ip.ip.ip.ip) port 25000 * succes........

  • connect: No buffer space available Oct 18 12:21:03 vps kernel: printk: 177 messages suppressed. Oct 18 12:21:03 vps kernel: Neighbour table overflow.


    ping test.com connect: No buffer space available /var/log/messages Oct 18 12:21:03 vps kernel: printk: 177 messages suppressed. Oct 18 12:21:03 vps kernel: Neighbour table overflow. Solution in /etc/sysctl.conf: net.ipv4.neigh.default.gc_thresh1 = 4096 net.ipv4.neigh.default.gc_thresh2 = 8192 net.ipv4.neigh.default.gc_thresh3 = 8192 net.ipv4.neigh.default.base_reachab........

  • Revert to GRUB 0.97/1 instead of GRUB2


    had trouble trying to revert Ubuntu 10.04 LTS from grub2, won't boot mdraid and did not even install mdadm during the installation! I have tried moving back to GRUB 0.97 backed up original /boot and then copied /boot from an old Debian install. Modified device.map and menu.lst and put the appropriate kernels and initrd for Ubuntu back in /boot I ran grub: root (hd0,1) grub> setup (hd0) Checking if "/boot/grub/stage1........

  • DRBD WFConnection Problem/Solution


    This has stumped me a few times because I keep forgetting that Centos 5.5 comes with a default iptables configuration that ends up blocking DRBD traffic,I tried all the normal things and couldn't understand why I couldn't make my normal DRBD config work. So if you have WFConnection problems and have tried the normal "mailing list" fixes, check your firewall status first! Both Nodes Say the Following: version: 8.3.8 (api:88/prot........

  • How not to change an IP address in CPanel during a migration


    /usr/local/cpanel/bin/swapip domain(s) It simply doesn't work, the Apache VHOSTS remain 100% unchanged, why does this script exist? I'm sure it would work from the control panel but I am locked out because my IP was changed and it doesn't match the CPanel license. I wish CPanel would make it easier to update the license IP. I even took it a step farther, I manually edited the vhosts and restarted Apache and it........

  • Installing Virtualbox on Centos 5.5


    wget http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm rpm -i http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm error: Failed dependencies: libGLU.so.1 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386 libSDL-1.2.so.0 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386 libXmu.so.6 is needed b........

  • Linux Kernel Freeze/Hang during boot on io scheduler cfq registered (default)


    You'll see the following and the boot process will freeze: io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) I have struggled with this issue on vari........

  • VirtualBox/VBOX Centos 5.5 Installation Kernel Freeze Problem "NET: Registered protocol family 2" And Solution


    NET: Registered protocol family 2 The above is the last thing that I ever saw, I tried pci=routeirq etc.. and it wouldn't work. The solution is to enable IOAPIC in the VBOX Settings Just enable "IOAPIC" in the settings for your Centos Guest and you'll find the kernel boots just fine. I wonder if a physical system might stall in this same way if the BIOS has IOAPIC disabled which many people do as a troubleshooting method. ........

  • Ubuntu 10.04 Linux is still not ready for the Desktop world


    I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD. Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer). I'll........

  • exim high load and dozens of processes


    This server was experiencing loads of up to 80 and maxing out the RAM and kmemsize on a CPanel VPS. There were literally dozens if not hundreds of exim processes. I have no idea why exim has such a design that would allow it to consume this much CPU and RAM. Any normal MTA should not be spawning so many processes, it should be processing them in sequence and if it is going to spawn hundreds of processes in response to a large volume of mail, it's better to have a delayed del........

  • After installation Directadmin does not work directadmin dead but pid file exists on OpenVZ VPS when browsing http://ip.ip.ip.ip:2222


    After installation Directadmin does not work on OpenVZ VPS when browsing http://ip.ip.ip.ip:2222 service directadmin status directadmin dead but pid file exists tail /var/log/directadmin/error.log Check the value of your ethernet_dev=eth0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifconfig 2010:07:10-12:44:01: ioctl can't find........

  • Realtek r8169 1gbit/1000mbit NIC/Ethernet Goes Down/Halts on Large File Transfer/Heavy Network Usage


    This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason? [655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........

  • FUSE/Curlftpfs mount ftp account as drive partition in Linux


    This is a great way to use your ftp server space, for example on your web hosting account (althoughI believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect. Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc.. Name curlftpfs - mount a ftp host as a local directory Synopsis........

  • Use rcconf to edit startup/init.d/init scripts on Debian/Ubuntu based distributions


    I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL. Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you. apt-get install rcconf Reading package lists... Done Building dependency tree Reading state information... Done........

  • rsync skipping non-regular file


    skipping non-regular file "mnt/lib/udev/devices/console" skipping non-regular file "mnt/lib/udev/devices/kmem" skipping non-regular file "mnt/lib/udev/devices/loop0" skipping non-regular file "mnt/lib/udev/devices/null" skipping non-regular file "mnt/lib/udev/devices/ppp" skipping non-regular file "mnt/lib/udev/devices/net/tu Solution for skipping non-regular file You need the -D........

  • How To Set DHCP/Static IP Address in Centos/RHEL/Fedora & Debian/Ubuntu/Kubuntu/MEPIS Set DHCP/Static IP Address


    Basically the two main types of distros are Debian and RHEL/Centos based. I'm just going to give a quick overview of how the configuration of IP interfaces works in Debian/Centos based distros. *Just one thing to remember, when setting IPs statically you have to manually specify a DNS server in /etc/resolv.conf (since DHCP is what normally does it automatically) Debian/Ubuntu/Kubuntu/MEPIS The IP (DHCP &........

  • CPanel Use /scripts/easyapache to recompile Apache/PHP with different options


    I used the "Image Manipulation and Security Options" and let the script do the rest. /scripts/easyapache For whatever reason, doing a manual compile of PHPmyself broke everything and I've never seen that before, that's why I resorted to the cheat of easyapache.........

  • Compile PHP 5.3.2 on Centos 5 and CPanel/WHM because of error - Fatal error: Call to > undefined function imagecreatefromjpeg()


    This function and others may not work with the stock PHPinstall on Centos/CPanel: Fatal error: Call to > undefined function imagecreatefromjpeg() Even with libjpeg-devel installed it won't work because PHP was not compiled with jpeg support, so we have to do the dirty work ourselves :) Here is the command/yum's I did to install missing libraries for PHP that configure will complain about (yes it is a one by one process). yum install bzip2-........

  • Unixbench Score on Core i5 750 with OpenVZ Kernel vs Xen/Openvz


    This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel. OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!) # # # # # #&n........

  • WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!


    The easiest way is if you have a secure way to connect and verify the hostkey of the remote host by using this guide. @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOME........

  • Windows install blue screen of death caused by faulty optical/DVD-RW drive.


    I took an educated guess because it kept happening at the same spot when loading the XP install. I thought it was the hard drive or motherboard. But it turns out my heavily used but loved NEC 3500 DVD-RW drive was the culprit. After disconnecting it and swapping it for another much beloved Pioneer DVD-RW, everything has gone smoothly. I never ran into this or many issues because I've hardly used this drive since moving it to another Desktop years ago. I actua........

  • Choose Which GCC Version to compile with via CC environment variable.


    It's very common to have multiple GCC versions for different reasons, as annoying as it is. Some newer/older programs only compile properly or at all on specific versions. You can export the following variable CC: export CC=gcc-4.1 Replace gcc-4.1 with the filename of the gcc you want eg. gcc-99........

  • Asus Eee PC 1000HE Crashed/Need To Recover/Restore Windows? Easy Solution is Hitting F9


    I'm not a fan of Asus and won't be buying another because of having to fight Asus over a bogus warranty denial (it's a long story but they only replied about how to RMA my unit weeks later on the EXACT day the warranty expired). Anyway, it's just a matter of hitting F9 to do this, there's no need to worry about booting from USB or CD (unless of course you want a different OS eg. Windows XP Pro, Vista/7, or a flavor of Linux or Unix). Also remember that you need to fully/properl........

  • Linux 2.6.33.3 Kernel Error CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function b


    CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function body not available drivers/message/fusion/mptsas.c:462: sorry, unimplemented: called from here make[3]: *** [drivers/message/fusion/mptsas.o] Error 1 make[2]: *** [drivers/message/fusion] Error 2 mak........

  • rsync halted froze Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync)


    Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync) I was surprised to see this in my dmesg whenmy rsync backup suddenly stalled/stopped. This system has 3 gigs of RAM and lots of free memory so I don't understand what is happening. rsync invoked oom-killer: gfp_mask=0x200d2, order=0, oomkilladj=0 Pid: 7600, comm: rsync Not tainted 2.6.24.2 #83 [] oom_kill_pr........

  • rsync my favorite/best/optimal default switches and options


    Not sure what rsync switches/options to use? rsync -PDrphogtl The short version would be: rsync -Pha I think these are really common sense options to use and probaby should be the default. Explanation of rsync switches P = display the progress D = hybrid of --specials and --devices so all special and device files will be copied as well. r = recursive (otherwise rsync won't copy files deeper than........

  • Seagate Drive 500GB Drive Dying


    This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART. Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device........

  • Seagate 7200.11 firmware defect in 500GB, 1000GB (1TB) and 1500GB (1.5TB) Hard Drives


    Seagate Inventory/Firmware Check I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate. *Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate! Seagate Inventory/Firm........

  • Convert HDD/Hard Drive Partition(s) into non-RAID into RAID 1 using existing data without data loss and without reformatting.


    Before we start I take no responsibility for this, you should have a backup and if you make a mistake during this process you could wipe out all of your data. So backup somewhere else before starting this as a precaution, or make sure it's data you could afford to lose. The RAID 1 Setup (Hardware Wise) I've already setup my 2 x 1TB (Seagate) drives with identical partitions, make sure your new hard drive (the empty one) is setup like your curr........

  • email2fax and Asterisk to do eFaxing


    It's basically free bash shell script available from: http://wpkg.org/email2fax/index.php/Main_Page Make sure you have the required tools: libtiff ghostscript mpack/munpack Where you can e-mail your Asterisk box and it will fax it to the phone number in the subject line. The good news ends there, it is fairly undocumented and buggy. Take for example how the documentation mentions you can invoke from the com........

  • tar gzip: stdout: File too large - Error Size Limit on Large file > 17GB


    The folder I was trying to archive is about 72GB, but much like rsync at about 17GB it chokes because of the filesize. What's with so many common and essential Linux tools having such limitations? I guess it is likely that the authors never wrote their code with the idea that files would be so large but it's still very annoying. It's important to stay on top of these limitations on production servers because I didn't realize what happened until I checked the file with "........

  • XMPP Chat Protocol using Jabber - Guide Tutorial Setup Linux Chat Server


    In Debian based distros: apt-get install jabber Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: fakeroot dkms Use 'apt-get autoremove' to remove them. The following extra packages will be installed: jabber-common The following NEW packag........

  • Picking an FTPD (vsftpd) Server in Linux Centos/Debian


    I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find. yum search ftp Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: ftp-stud.fht-esslingen.de * base: mirrors.netdna.com * updates: updates.interworx.info * addons: yum.singlehop.com * extras: mirrors.netdna.com rpmforge........

  • Compaq V2405CA Laptop - Unixbench Performance Test


    Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics. # # # # # # # ##### ###### # # #### # # # # ## # # # #&nb........

  • heartbeat is stopped for some reason


    heartbeat is stopped for some reason Anyway hnode2 was active and the services are running fine but I see heartbeat has been stopped somehow. Here is the last log I see of heartbeat: [quote:23c84415f5] Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: MSG stats: 9/1762471 ms age 0 [pid16738/MST_CONTROL] Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: cl_malloc stats: 716/51784021 152624/74519 [pid16738/MST_CONTROL] Sep 9 17:15:32........

  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........

  • Javascript Get a specified element using getElementById()


    Javascript Get a specified element using getElementById()Great, it produces the value for whatever "id" is passed to the function. http://www.java2s.com/Code/JavaScript/Development/GetaspecifiedelementusinggetElementById.htm [code:1:1287ede953] function getElement(){ var x=document.getElementById("myHead........

  • Asterisk FreeBSD compile problems


    Asterisk FreeBSD compile problemsI couldn't get it to compile without using the following options at compile time: [b:b7d672ee28] make install WITHOUT_ZAPTEL=YES WITHOUT_MYSQL=YES WITHOUT_FAX=YES WITHOUT_ODBC=YES WITHOUT_H323=YES[/b:b7d672ee28]Some problems you might have with copying over your Linux config files to FreeBSD is different paths. [b:f044931f41]For example the etc path for Asterisk on BSD will now be:[/b:f044931f41] [qu........

  • CentOS (most Linux) no-RAID to software RAID-1 guide


    CentOS (most Linux) no-RAID to software RAID-1 guidehttp://lists.centos.org/pipermail/centos/2006-January/018624.html........

  • How to extract files from RPM & SRPM files


    How to extract files from RPM & SRPM filesmkdir any_directory cd any_directory rpm2cpio /location/of/package.src.rpm | cpio -d -i This will extract all files, I find it especially useful if you want to manually compile the kernel source from the srpm........

  • Centos 4.3 x64 & VMWare Server Beta


    Centos 4.3 x64 & VMWare Server Beta[code:1:6d0b2c8c2f] The correct version of one or more libraries needed to run VMware Server may be missing. This is the output of ldd /usr/bin/vmware: linux-gate.so.1 => (0xffffe000) libm.so.6 => /lib/tls/libm.so.6 (0xf7fbd000) libdl.so.2 => /lib/libdl.so.2 (0xf7fb9000) libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fa7000) libX11.so.6 => not f........

  • Need identd for port 113 ? Install authd


    Need identd for port 113 ? Install authdyum install authd Happy identing :)Actually it's not that simple. It installs as an "xinetd" service and is disabled and turned off by deafult. To enable it run: [code:1:8c94df8319] chkconfig --level 3 auth on service xinetd restart [/code:1:8c94df8319] This will set identd aka authd to start by default. service xinetd resta........

  • /usr/bin/ld: cannot open crt1.o: No such file or directory


    /usr/bin/ld: cannot open crt1.o: No such file or directory[quote:812bec9db7]/usr/bin/ld: cannot open crt1.o: No such file or directory collect2: ld returned 1 exit status[/quote:812bec9db7] This is annoying and in my case it happened on Centos AMD 64 when compiling a 32bit program with GCC. Install glibc-devel.i386 (make sure you get the i386 version and not the native 64 bit version which is likely already installed). The joys of 3........

  • Roxio Easy Media Creator "Could not complete last comma


    Roxio Easy Media Creator "Could not complete last comma[b:2e4e25672a]"Could not complete the last command because: Unknown error"[/b:2e4e25672a] When I try to burn an .iso image by double clicking it and allowing Roxio to open up "Disc Copier" I get a bunch of those messages. It's annoying and not really awe inspiring!........

  • Xorg fonts missing Xorg.0.log


    Xorg fonts missing Xorg.0.logThis happened on a PCBSD installation but it could happen on any Unix/Linux Xorg installation: If the text on your screen is too small and you're running at a high resolution if you do a [code:1:04ca0d3455]cat /var/log/Xorg.0.log | more [/code:1:04ca0d3455] You'll see a bunch of fonts missing, specifically the 75dpi and 100dpi ones that you really need :) (WW) The directory "/usr/X11........

  • How to compile in Windows/DOS


    How to compile in Windows/DOSMingW is a free compiler project so start here: http://www.mingw.org/download.shtml#hdr2 I downloaded the core GCC compiler: http://prdownloads.sf.net/mingw/gcc-core-3.4.2-20040916-1.tar.gz?download But it's missing even the standard C runtime libraries like "stdio.h"! You may also need to add environment variables from the DOS command line. Here is a simpl........

  • DVD Burners and Media at an all time low


    DVD Burners and Media at an all time lowThis is crazy you can buy a nice Pioneer DVD burner for like $64 CAD now and good media like 50PC Maxell is just $25.97 at Walmart. I'm liking this. Time to make double archives of important data :)........

  • E-Mail Tip


    E-Mail TipI just thought I'd give you guys a good tip about e-mail. It seems a lot of people like to use a Hotmail or ISP (eg. Telus) account for their e-mail but the problem is what happens if you switch ISPs, then your e-mail address no longer works and old friends might not be able to contact you. The same thing has happened for excite.com e-mail addresses where they just shut down. Whether you are a business owner or personal user can you afford to lose an e-mail........

  • Intel's Finnish Fetish


    Intel's Finnish FetishIntel's Finnish Fetish By Dave Mock June 13, 2005 Chipmaker Intel (NASDAQ: INTC) has successfully topped the personal computer market for decades. Breaking into related areas such as communications has been much difficult for the world's largest semiconductor maker. But a new partnership with Nokia (NYSE: NOK) could help to change that. Intel's forays into cellular-phone and home-entertaiment-device chips have........

  • PHP imagecreate() not found but compiled with GD


    PHP imagecreate() not found but compiled with GDHere is what I get: [code:1:be41bc7717] Fatal error: Call to undefined function: imagejpeg() in image.php on line 56 [/code:1:be41bc7717] I am positive it is compiled with GD so I don't get the errorI need to install the linux-jpeg package then I need to recompil........

  • PHPBB Drop All Tables


    PHPBB Drop All TablesSQL Syntax: [quote:75acd496c1]drop table phpbb_auth_access, phpbb_banlist, phpbb_categories, phpbb_config, phpbb_confirm, phpbb_disallow, phpbb_forum_prune, phpbb_forums, phpbb_groups, phpbb_posts, phpbb_posts_text, phpbb_privmsgs, phpbb_privmsgs_text, phpbb_ranks, phpbb_search_results, phpbb_search_wordlist, phpbb_search_wordmatch, phpbb_sessions, phpbb_smilies, phpbb_themes, phpbb_themes_name, phpbb_topics, phpbb_topics_watch, phpbb_user_group, p........

  • Helpful IPFW Examples


    Helpful IPFW ExamplesSomeone's real life examples: http://lists.freebsd.org/pipermail/freebsd-security/2004-July/002181.html Or you can try the FreeBSD Handbook guide: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/firewalls-ipfw.html........

  • Package management


    Package managementIf you're like me and often like using an older version you'll need to know this. Since all 5.x versions no longer have packages of their own you'll have to use the 5-stable The best way is to set the [b:d5e8972240]packagesite environment variable[/b:d5e8972240] like so in your [b:d5e8972240].profile [/b:d5e8972240]file [quote:d5e8972240]vi /etc/.profile[/quote:d5e8972240] Add this: [code:1:d5e897224........

  • My list of handy security links - Ongoing


    My list of handy security links - Ongoing[b:6f8d25be68][size=18:6f8d25be68]News[/size:6f8d25be68][/b:6f8d25be68] Security Focus http://www.securityfocus.net - Nice Security News Site CERT http://www.cert.org/ Common Criteria (see if your OS/software is EAL4 certified) EAL(Evaluation Assurance Levels is the industry standard for evaluation of security in software) http://www.commoncriteria.com [size=18:6f8d25be68][b:6f8d25be68]Tools[........

  • Other Security Web Sites


    Other Security Web SitesSeveral websites actively track security issues. This list provides you with the major providers of security information on the Web. Many of these organizations also provide newsletters and mailings to announce changes or security threats: Center for Education and Research in Information Assurance and Security (CERIAS) CERIAS is an industry-sponsored center at Purdue University that is focused on technology and relate........

  • Telus Begins Enforcing Bandwidth Caps


    Telus Begins Enforcing Bandwidth CapsIt appears Telus has begun to send e-mails out and is planning on enforcing bandwidth caps of only 10gigs/month for their 1.5mbit plan and 20gigs/month for 2.5mbit The state of Canadian ISPs is horrible :( In the east coast, Bell Sympatico will allow you to have unlimited bandwidth and even Aliant will and they have 3mbit for a much more affordable price than our 2.5mbit on Telus. Telus needs to get wit........

  • Wireless/xmit power - DD-WRT v23 SP2 (09/15/06) std - build 3932 Linksys WRT54G/GL/GS


    I played around with xmit power (how much power in mW) to see if I could increase the range and signal strength. Idon't think this Linksys WRT54G's strength is the wireless, it seems to have poor signal quality and transfer rates all around. Ithink part of the problem is also that there are several wireless networks around my house that could be interfering and the walls are thick here. Anyaway, moving on now :) The default is 28mW and I increased it to........

  • Linux Kernel Compilation (Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support ) Error - drivers/net/igb/igb_main.c: In function `igb_up': make[3]: *** [drivers/net/igb/igb_main.o] Error 1


    Linux Kernel v2.6.30.3 102220 blocks CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-x86 CALL scripts/checksyscalls.sh CHK include/linux/compile.h CC drivers/net/igb/igb_main.o drivers/net/igb/igb_main.c: In function `igb_up':........

  • Debian/Ubuntu/Kubuntu Bash/Console/Terminal/Putty Home and End Keys Don't Work or Produce a ~


    This is a very weird, annoying and bizarre quirk with many distributions, especially Debian. The home and end keys don't work, but it's a simple fix as long as you found this article :) You just have to edit /etc/inputrc: Find the commented lines as shown below: # "e[1~": beginning-of-line # "e[4~": end-of-line *If you can't find the above, just copy and paste the code below into your inputrc, it will en........

  • How to Track Down/Find Cause of Linux high disk iowait/wa


    top - 09:34:12 up 2 days, 20:57, 2 users, load average: 1.83, 1.99, 2.03 Tasks: 59 total, 2 running, 57 sleeping, 0 stopped, 0 zombie Cpu(s): 0.3%us, 0.0%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st That 99.7% wa is iowait, it means the server is waiting for a process to complete an IOoperation or in plain English, there is a delay in........

  • How To Enable 3rd/third party packages in RHEL/Redhat/Centos 4/5 Linux via RPMForge


    It's a bit of a pain that many basic third party tools that aren't put of the main Centos/RHEL repositories are not available unless you compile them or install the RPMForge Repo. *Updated 08/29 with new download location changed from apt.sw.be to rpmforge.sw.be Here's a quick, simple/cut&paste way to do it: wget http://rpmforge.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.i386.rpm rpm -i rpmforge........

  • Hard Drive Not Working/Not Detected By Your BIOS Anymore?


    I was starting to panic because suddenly my 1TB Seagate SATA drive wasn't working,I thought it was a BIOS issue because it seemed to have happened after I tried overclocking my Desktop too much. I tried powering down and waiting, but I still couldn't hear the drive spin up at all. I tried a second 1TB hard drive and it wouldn't work either. I checked all power connections again and again until one of the pins in the MOLEX connector popped completely loose. Th........

  • Clustered/Distributed Network Filesystems, Which Ones live up to the hype?


    I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems. DRBD I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........

  • Timezone Change/Updated for Linux/Unix Debian/Fedora/Ubuntu/Centos Change Update Time zone


    In Newer Linux Distros This Way Is Easiest and works on newer versions like Ubuntu, Mint, Fedora, Centos, Debian etc. #if you are missing timedatectl this in newer distros like Ubuntu/Mint/Debian and are using a container like Docker then do "apt install systemd" timedatectl set-timezone America/Vancouver Replace the America/Vancouver with the correct timezone. To see the list you can just type "timedatectl set........

  • Have an OpenVZ VPS/Linux Virtual Private Server and nothing works right?


    A VPS Server I had just wasn't working right, code that I migrated there just wasn't working. For example, it kept telling me the connection to the database was unsuccessful, halfway through iterating through results it already had. Then I realized it wasn't my code. Ichecked my /proc/user_beancounters and found this: cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt........

  • Linux How to Search for text within any file using Linux/Unix - Use GREP


    It's actually very simple and "grep" makes it as easy as possible. I'll outline a few common scenarios and provide some examples. Say you want to search ALLfiles within the current directory (and inside/deeper) for the text "phpinfo()" grep -R "phpinfo()" * If you want to search only certain files such as only .txt you would do this instead: grep -R "phpinfo()" *.txt As you ca........

  • MySQL Restoring And Dumping/Backing UP MySQL Data/Tables/Databases


    Backing MySQL Databases Backing Up/Dumping All Mysql Databases To A Single File mysqldump --all-databases -u admin -p > allmysqldatabases.sql The "-all-databases" clause is pretty obvious isn't it? It means that it will backup all databases. The "-u admin" means login using the user "admin", if you h........

  • How To Save iptables firewall rules Centos/Redhat/Fedora Linux


    This is something that annoys a lot of people, fortunately the Redhat style OS's are the most simple in this respect. I disagree that Debian's way makes sense, it is more of a hackish approach in how they implement iptables. Anyway, for those who are using Redhat/Centos style OS's it is very simple. Set your rules from the shell/command prompt and to save the iptables firewall rules so they are remember/loaded on boot just run this command: service iptables........

  • iPhone Create Silent/Free Custom Ringtone jailbroken/jailbreak iPhone


    As shown below you can find ringtones in the "/private/var/stash/Ringones*" directory of your iPhone. Different reports have said that the .m4r format is really an MP4 file and some have said AAC and some also say "it's the same as the M4A" format. Whatever the case is, one easy way is to install the silent theme from Cydia and copy that into your ringtones directory. /private/var/stash/Ringtones.sh7cLj root# ls Alarm.m4r ........

  • iPhone 3GS Jailbreak Information & Benefits


    Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore. A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly. In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........

  • Weird characters in Linux putty shell


    Iused to get all kinds of weird annoying characters like "" during compilation with gcc especially. example: dmg2img.c:456: error: BZ_OK undeclared (first use in this function) dmg2img.c:471: warning: implicit declaration of function BZ2_bzCompressEnd dmg2img.c:482: warning: implicit declaration of function BZ2_bzDecompress dmg2img.c:484: error: BZ_PARAM_ERROR undecl........

  • Using a Mac OSX DMG Image in Windows and Converting to Standard ISO Format use dmg2iso


    The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso I'll only cover theLinux version although the Windows pre-built binary works the same way. Download dmg2iso here for free (from the author's website) It's just silly and doesn't make sense that Ubuntu doe........

  • Apple iPhone 3GS and predecessors are leading a revolution


    As much of a computer nerd as Iam, I'm usually a late adopter to technology for a few reasons. Ifeel most new hyped technologies and electronics are mainly fads, and I'm also cheap. Adopting later means you avoid the bugs, kinks and most importantly pay the lowest price, that's me being cheap again :) I never read much about the iPhone but Isaw all the hype around it and until recently I wasn't a big fan of anything Apple until a few years ago I realize........

  • Nokia N97 review, feedback and complaints


    I've had an old Blackberry for a few years and I was ready to spend some serious cash on a nice Nokia. I love the idea of the Linux based Symbian S60 OS, so I was looking at phones like the E63, E71 (both are basically the same, at least CPU/screensize although E71 is thinner, has a 3MP camera, has GPS, and has dedicated buttons to adjust the volume). Then Iheard about the N97 and what a revolution it was supposed to be and it was even compared to iPhone. To........

  • SSH Slow Login even with SSHD UseDNS no parameter


    Icouldn't understand why on one system it took a few minutes to get the SSHlogin prompt when connecting to other systems. The other systems all had the UseDNS parameter set to no, which almost always resolves the login prompt delay. The reason is Ubuntu and perhaps Debian and other distributions /etc/nsswitch.conf file Edit yours to have the "hosts" line like so (notice that files and dns are the primary resolution choice........

  • SIOCSIFADDR No such device eth0 error while getting interface flags - eth0 Ethernet Device can


    Igot this after copying a VMWare image onto another machine in Debian. SIOCSIFADDR No such device eth0 error while getting interface flags The solution 1.) Find and edit the device line in persisent-net.rules note it will be prefixed with something like z25 or something else. vi /etc/udev/rules.d/z25_persistent-net.rules The easiest way is to comment anything out. If you are feeling........

  • OCFS2 crash


    When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it. More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things. Output of /var/log/messages for OCFS2 Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........

  • Samba SMB Error - Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD


    Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD That happens when trying to use smbclient to connect to a share. The weird thing is that I can authnenticate just fine from Windows XP. It is partially my mistake, I forgot this share does have a password. I've tried authenticating with the correct user and also with "Guest" because this works in Windows. In Linux I ........

  • Rackable Systems and their Microslice Clustered 1U Servers


    Ithink there has been a lot of negative press towards Rackable Systems. We will give their new solution credit that it is marketed very well, and comes prepackaged and ready to go. But let's cut through the hype of both sides, the people who love this concept and the people who hate it. What Rackable Systems have done is a first, to minimize space, power and costs into small servers. This is great, and many companies have already built their own servers based........

  • Bash Scripting Variable Scope Using Piped While Loop


    I've been struggling with this for awhile, wondering why all of my variables are null. Ijust realized the variables disappear after leaving this while loop. Note that I'm piping to the while loop which makes a subshell Ibelieve which is the cause of the issue: echo "$accounts"|while read thisline; do somevariable="some value" (( ++counter )) done At all costs you ne........

  • LAME MP3 Encoder Segmentation Faults


    This happened on one of my Ubuntu machines where Igot some kind of segfault on line 21 from LAME at random while encoding MP3s (a second try is fine usually). I've read that it's best to compile it from source and that has solved most issues for people. Here is my preferred configure line: ./configure --enable-mp3x --with-fileio=lame --enable-debug --with-vorbis Even with that I got a different error this tim........

    • Latest Articles

  • How high can a Xeon CPU get?
  • bash fix PATH environment variable "command not found" solution
  • Ubuntu Linux Mint Debian Redhat Youtube Cannot Play HD or 4K videos, dropped frames or high CPU usage with Nvidia or AMD Driver
  • hostapd example configuration for high speed AC on 5GHz using WPA2
  • hostapd how to enable and use WPS to connect wireless devices like printers
  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730
  • Cloned VM/Server/Computer in Linux won't boot and goes to initramfs busybox Solution
  • How To Add Windows 7 8 10 11 to GRUB Boot List Dual Booting
  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile
  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial
  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif
  • Linux Debian Mint Ubuntu Bridge br0 gets random IP
  • redis requirements
  • How to kill a docker swarm
  • docker swarm silly issues
  • isc-dhcp-server dhcpd how to get longer lease
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian
  • zfs and LUKS how to recover in Linux
  • [error] (28)No space left on device: Cannot create SSLMutex Apache Solution Linux CentOS Ubuntu Debian Mint
    • Copyright © realtechtalk.com 2024