• Ubuntu Linux Mint Debian Redhat Youtube Cannot Play HD or 4K videos, dropped frames or high CPU usage with Nvidia or AMD Driver


    In a lot of distros, vdpau which accelerates video through the GPUis often not installed even in recent distros. This will result in Firefox with Youtube dropping frames when you check the "Stats for Nerds" and to the eye as jerky or slower video playback due to the dropped frames. Some sites will say that because you are watching VP09 that there is no GPU support, but with vdpau installed and enabled, many GPUs will still be able to use hardware decoding for 4K........

  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730


    This is certainly a poor design, as you can read many seasoned admins who have updated their iDRAC only to have it killed. One possible cause is not by doing all the incremental updates, doing updates from an old iDRAC to one many revisions newer is a sure way to kill things, but even then there is no guarantee based on the amount of failures. List of threads of people's dead iDRAC's:........

  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.


    This sometimes happens when trying to install the EFIversion of grub to a device when you are booted into Legacy/MBR mode. It doesn't seem to occur on all machines, but some and seems somewhat BIOS dependent. grub-install --target=x86_64-efi /dev/sda Installing for x86_64-efi platform. grub-install.real: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image.. grub-install.real: warning: Couldn't find physica........

  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif


    [Wed Nov 01 18:47:08 2023] [error] Unable to configure verify locations for client authentication [Wed Nov 01 18:47:08 2023] [error] SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line [Wed Nov 01 18:47:08 2023] [error] SSL Library Error: 185090057 error:0B084009:x509 certificate routines:X509_load_cert_crl_file:PEM lib It actually gives us a good clue that at last one component of our cert is invalid/improperl........

  • Linux Debian Mint Ubuntu Bridge br0 gets random IP


    This can break things easily in remove environments where it was normally easy to convert a normal eth0 to a bridge under br0, and that bridge would normally have the same MAC address by default, which is desirable for most situations. In Debian 11 this is different for some reason now. https://unix.stackexchange.com/questions/681013/bridge-gets-random-mac-........

  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian


    This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525. Then nvidia-modeset goes to 100% There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines. https://forums.de........

  • zfs and LUKS how to recover in Linux


    Sometimes users take their removal drives and unplug and replug them to test what happens during the failure of a disk. However, this breaks things quite badly due to the /dev/mapper in LUKS not coming back online due to it not being closed. In other words, generally with non-encrypted drives the process is smooth but when encrypted you may want to follow a strategy like this: We can see below that both disks are unavailable as they were physically remov........

  • ImageMagick error convert solution - convert-im6.q16: cache resources exhausted


    convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244. convert-im6.q16: cache resources exhausted `/tmp/magick-27777Al6FGY7dhyKt10' @ error/cache.c/OpenPixelCache/3984. convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244. convert-im6.q16: cache resources exhausted `/tmp/magick-277772Y_-pJnMdT2r1' @ error/cache.c/OpenPixelCache/3984. convert-im6.q16: Distr........

  • File "/usr/local/lib/python3.5/dist-packages/pip/_internal/utils/entrypoints.py", line 12 f"pip{sys.version_info.major}", ^ SyntaxError: invalid syntax python pip3 error solution


    Is python3-pip pip3 not working anymore? Traceback (most recent call last): File "/usr/bin/pip3", line 11, in sys.exit(main()) File "/usr/local/lib/python3.5/dist-packages/pip/__init__.py", line 11, in main from pip._internal.utils.entrypoints import _wrapper File "/usr/local/lib/python3.5/dist-packages/pip/_interna........

  • du - VAS Billing Subscriptions Hack/Scam MLPremiumSub Invascom Astromart Issues Complaint


    If you have du, you may want to check your bill, as you can read about a longstanding issue with fraudulent charges showing up and many users claiming they did not subscribe or solicit those offers. These don't normally show up on new accounts, but they seem to target established users and maybe even users they suspect are not watching their phone or bills, while they are on vacation. These charges can frighteningly happen with 0 interaction from the user despite what........

  • Docker Swarm vs Kubernetes Comparison Guide


    A lot of companies are unsure which solution to choose and many may not be aware of Docker Swarm as an alternative to Kubernetes. One thing that many Sysadmins find is that Docker Swarm is simply easier, quicker to setup and maintain by far than Kubernetes.........

  • When is it time to leave your VPS/VDS Cloud Hosting Provider?


    When Is It Time to Leave Your VPS, VDS, and Dedicated Server Provider? Choosing the right hosting solution—be it Virtu........

  • 2024 Buyer's Guide: How to Choose and Buy the Best VPS/VDS for Your Needs - Tips and Strategies


    In today’s digital landscape, finding a reliable and secure Virtual Private Server (VPS) or Virtual Dedicated Server (VDS) goes beyond just comparing specs and prices. With increasing concerns over data privacy, security breaches, and government surveillance, the wisdom of choosing your VPS/VDS provider based on juri........

  • Linux how to get list of all timezones on system Ubuntu


    find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV" Africa/Addis_Ababa Africa/Abidjan Africa/Blantyre Africa/Lusaka Africa/Casablanca Africa/Libreville Africa/Asmara Africa/Bujumbura Africa/Dakar Africa/Lagos Africa/Malabo Africa/Harare Africa/Kigali........

  • How To Upgrade Debian 8,9,10 to Debian 12 Bookworm


    Step 1.) Upgrade to Debian 11 first The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful. Step 2.) Update sources.list Update your /etc/apt/sources.list like this: deb http://........

  • apache2 httpd apache server will not start [pid 22449:tid 139972160445760] AH00052: child pid 23248 exit signal Aborted (6) solution Mint Debian Ubuntu Redhat


    If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing. The above results in this less than obv........

  • How to use the FTDI USB serial cable to RJ45 adapter to connect to the console on Cisco/Juniper Switch Router Firewall in Linux Ubuntu Debian Redhat


    This should work for most console ports of other manufacturers too. It is a quick and simple method for emegencies or deploying a few appliances/devices in a non-standard environment or small environment. However, if this is a route thing, or the equipment is not physically close to you, it would be best to use some sort of "Terminal" server which is an IP connected switch with several serial ports built-in for this purpose. Normally they accessible by web/........

  • How To Setup Python3 in Ubuntu Docker Image for AI Deep Learning


    The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself. I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all. docker run -it --runtime=nvidia --gpus all ubuntu bash These works for most images li........

  • How to Configure NVIDIA GPUs with Docker on Ubuntu: A Comprehensive Guide for AI Deep Learning CUDA Solution


    Welcome to our in-depth guide on configuring NVIDIA GPUs with Docker on Ubuntu. This post is tailored for developers, data scientists, and IT professionals who are looking to leverage the power of NVIDIA's GPU acceleration within Docker containers. Whether you're working on machine lea........

  • Linux Ubuntu Mint how to check nameservers when /etc/resolv.conf disabled solution


    You'll notice that /etc/resolv.conf contains dire warners on most Linux Desktops. # This file is managed by man:systemd-resolved(8). Do not edit. # # This is a dynamic resolv.conf file for connecting local clients to the # internal DNS stub resolver of systemd-resolved. This file lists all # configured search domains. # # Run "resolvectl status" to see details about the uplink DNS servers # currently in use........

  • Linux How To Upgrade To The Latest Kernel Debian Mint Ubuntu


    How to check what kernel version you have/currently running? uname -rm 5.4.0-91-generic x86_64 The above shows us that we are running 5.4.0-91-generic on the x86_64 architecture. The safest way is to stick with the same flavor eg if you're on generic, and say on kernel 5.4.0 then it makes sense to follow what is below. However, if you are migrating or dual booting between newer hardware (eg. you got a........

  • Linux swapping too much? How to check the swappiness and stop swapping


    We could always disable swap but this would normally be a bad idea unless you have an incredible amount of RAM and a workload that will never exceed it. However, for live/containerized and high performance environments it could be desirable. Another middle ground may be to set swappiness to a lower number. You may also want to clear your kernel's cache, which could be eating up RAM unnecessarily by c........

  • request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted solution


    request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted This is usually caused by a mismatch in architecture and happens frequently in development environments. Here is a example of what caused this issue: Your binaries are based on one architecture Your kernel was compiled with another architecture. Why does this happe........

  • How to upgrade to the latest Python version on Linux Ubuntu Debian Mint 3.11


    A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version. Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended): Step 1 - Add the repo apt-add-repository ppa:deadsnakes/ppa If you get an error about requests then install it:........

  • python3 error Ubuntu Linux error solution SyntaxError: invalid syntax line 12 pip{sys.version_info.major}


    This sort of thing normally happens your python3 or pip3 has been updated, because you have to in order to use pip, but the newer pip now breaks compatibility with your old python (3.5 in this case). There are a few solutions, the easiest is perhaps to upgrade to a newer OS with a newer distro provided Python 3 or to manually install a newer version of Python/OR use a PPA like deadsnakes that provides newer versions. ........

  • How to install and configure haproxy on Linux Ubuntu Debian


    haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx. haproxy is used by many large sites per Wikipedia: HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........

  • How to install Windows or other OS and then bring to another computer by using a physical drive and Virtual Machine with QEMU


    This has been a tried and true method for Windows because it is finicky with hardware changes without a reinstall (eg BSOD on boot is what happens 9/10 times unless you move to the same hardwar). Surprisingly, if you use a QEMU VM and do a standard install, it has worked in every system I've thrown the drive in afterwards. So the play is this, use a USB SSD, physical SATA drive plugged internally or for convenience, you could use a SATA to USB adapter on another computer to perf........

  • Linux grub not using UUID for the root device instead it uses /dev/sda1 or other device name solution


    You can read lots of posts about this issue but there is not much information about why this is the case or how grub determines the root= device name. Some even suggest modifying grub.cfg manually which is a disaster as the next kernel update will cause grub to revert back to the device name. For most people this won't be an issue but those using template system, automated deployments and working in embedded may run into this issue with custom embedded and created minimal kernel........

  • Nvidia Tesla GPUs K40/K80/M40/P40/P100/V100 at home/desktop hacking, cooling, powering, cable solutions Tutorial AIO Solutions


    Do you have access to some old Tesla GPUs and want to try them at home in your Desktop or old Server? Some people have wanted to try these units for gaming but keep in mind they have no video out port, they were only meant for AI applications such as Deep Learning. The easiest way by far is to choose an AIservice that has everything ready to go, perhaps with a bunch of Docker or Kubernetes containers. This can be done with Cloud services like Google, Amazon and many........

  • Thunderbird Attachment Download Error Corrupt Wrong filesize of 29 or 27 bytes Solution


    This is an ongoing issue even with the latest Thunderbird 102.x where attachments downloaded via IMAP just won't save or will be corrupt which is a huge interruption to workflow or if you come back later to find out the file you thought you saved is invalid/corrupt and you have perhaps deleted the e-mail. How to solve the Thunderbird filesize attachment issue? 1. Click on "Settings". then go to "General". 2. Scroll to the bottom to find "Conf........

  • Generic IP Camera LAN Default IP Settings DVR


    If you are converting a generic wifi IP camera to ethernet, it may not be that simple as many are default hard coded to a static IP of 192.168.1.168 and login info admin/admin. From there you can login to the camera and assign it to DHCP by going to http://192.168.1.168 For security these cameras +DVR should be on a separate untagged VLAN or if possible a physically isolated non-internet connected switch/network. The reference below is applicable to many of the r........

  • Ubuntu Debian Mint Linux How To Update Initramfs Manually update-initramfs


    The easiest way for the current running kernel is: update-initramfs -u -k `uname -r` You could change -k to a specific kernel name if for some reason the current is not running (eg. if you are chrooted or in recovery mode). If you want to update all kernels then use "-k all" update-initramfs -k all -u update-initramfs: Generating /boot/initrd.img-5.4.0-162-generic........

  • Cisco Switch / Router How To Restore Factory Default Settings


    1.) Make sure your conf register is 0x2102 Do show version and at the very end of the output you will see the Configuration register. show version Configuration register is 0x2102 If the config register is not 0x2102 then enter this command: r1#configure terminal r1(config)#config-register 0x2102 r1(config)#end 2.) Let's Erase the NVRAM/flash........

  • GRUB error: invalid arch-independent ELF magic. Solution How To Fix Linux Centos Ubuntu Mint


    I've seen this bizarrely happen on a newly partitioned and custom installed Linux install, particularly if you did not properly unmount before rebooting. You can find reports of it happening on various How to fix the error: invalid arch-independent ELF magic. You need to boot into Live/Rescue mode, chroot into your OS properly and then do a grub-install on each drive that nee........

  • i915 nouveau Nvidia GPU not starting lightdm Xorg failing solution for Could not determine valid watermarks for inherited state


    It may appear to be an Xorg or lightdm/gdm/mdm error but in reality for many users with this issue, it's a driver conflict and issue. I had a system that had two GPUs, an Intel and Nvidia GPU. The only thing that got it working was to remove the nouveau driver and blacklist it so it never came back, then the Intel GPU works fine without these issues. Solution sudo rmmod nouveau add nouveau/other driver to blacklist edit th........

  • How To Reload All Kernel Modules And List Required Moduels for Each Device - Linux Mint Debian Ubuntu Troubleshooting


    One easy way is to use lspci -k like this: sudo lspci -k|grep modules|sort -nr|uniq Kernel modules: snd_hda_intel Kernel modules: shpchp Kernel modules: pata_acpi Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia Kernel modules: mei_me Kernel modules: lpc_ich Kernel module........

  • LightDM Mint Ubuntu Debian won't start errors Nvidia Graphics


    This error implies that there may be an issue with Xorg or maybe your NVIDIA GPU cannot start or initialize: 35 laptop kernel: [ 2031.857704] nvidia: loading out-of-tree module taints kernel. 35 laptop kernel: [ 2031.857724] nvidia: module license 'NVIDIA' taints kernel. 35 laptop kernel: [ 2031.857725] Disabling lock debugging due to kernel taint 35 laptop kernel: [ 2031.873280] nvidia: module verification failed: signature a........

  • WARNING: Unable to determine the path to install the libglvnd EGL vendor library config files. Check that you have pkg-config and the libglvnd development libraries installed, or specify a path with --glvnd-egl-config-path. Linux Ubuntu Mint Debian E


    If you get an error like this when installing the Nvidia drivers: WARNING: Unable to determine the path to install the libglvnd EGL vendor library config files. Check that you have pkg-config and the libglvnd development libraries installed, or specify a path with --glvnd-egl-config-path. Just install these packages: &nbs........

  • How To Upgrade Linux Mint 18.2 to 18.3 to 19.x and 20.x


    Linux Mint offers an easy and painless upgrade path through the last 3 versions, which means no more reinstalling to stay current with the latest version. The only catch is that you need the latest of each version, so for 18, you need 18.3 before you can go to 19, and then 19.3 (or latest), until you go to 20. However, it's really a small price to pay and on the machines we've tested, the upgrade went seamlessly each time (although sometimes video drivers/custom kernel modules l........

  • MP3s Won't Play / ID3 Version 2.4 Issues in Cars and Other MP3 Players/CDs/DVDs Solution


    ID3 2.4 can cause various MP3 players, especially on vehicles or even computers, not to play or at least not to display the ID3 tags. In many cases though, since ID3 2.4 is much different than version 2.3, it will cause some players, especially in cars like Lexus not to play. Even on the computer, you may notice if you check the properties of the MP3 that it won't open or show any details (eg. frequency, bitrate and ID3 tags). One symptom of this in a vehicle (eg. Leuxs,........

  • How To Do Linux Network Bonding Teaming in Mint Debian Ubuntu


    Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows. There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........

  • GlusterFS HowTo Tutorial For Distributed Storage in Docker, Kubernetes, LXC, KVM, Proxmox


    This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory. Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage. One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........

  • Docker Tutorial HowTo Install Docker, Use and Create Docker Container Images Clustering Swarm Mode Monitoring Service Hosting Provider


    The Best Docker Tutorial for Beginners We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........

  • How To Create OpenVPN Server for Secure Remote Corporate Access in Linux Debian/Mint/Ubuntu with client public key authentication


    Why choose OpenVPN instead of a firewall appliance? OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time. When comparing OpenVPN with traditional firewal........

  • pulseaudio issue on QEMU/KVM guest VM when microphone is replugged/unplugged pulseaudio: pa_threaded_mainloop_lock failed pulseaudio: Reason: Invalid argument


    Here is the scenario, you are using QEMU/KVM and are using something like the AC97 sound driver to pass the host audio to the guest via pulseaudio. This is useful because you can transparently pass your mic input from the host which means you can mute your microphone from the host, which prevents the guest from receiving any mic input even if unmuted. Mute / Unmute Fix This issue also seems to happen even if you press the mute button on the microphone and then unmute,........

  • Virtualbox VBOX Howto Port Forward To Guests


    NAT Network, the VMs can communicate but your host cannot access them by default. NAT VMs have internet but cannot communicate with each other. Bridged is simple and allows full LAN access as if you had a physical machine plugged in but is often bad for testing, work or corporate environments and is not very portable when it comes to moving your VMs to other locations and networks. Here is how you can use NAT Ne........

  • Ubuntu/Debian Linux/Unix Howto Setup Install Syslinux Bootable USB with EFI and MBR from Command Line/CLI Terminal


    There aren't too many simple guides that show you how to use commands to setup your USB or other drive as a normal bootable drive where you can easily boot custom kernels or whatever OS you would like. 1. Get the tools we need: We install "syslinux" for MBR and "syslinux-efi" for EFI and "MBR" as we need a tool that embeds the actual MBR into our USB: sudo apt install syslinux syslinux-efi mbr........

  • Unable to mount location Failed to retrieve share list from server: Connection timed out - Samba/Linux Filesharing Not working Ubuntu Mint Linux Solution


    So you're trying to browse to a properly configured Samba share but you get this error: Unable to mount location Failed to retrieve share list from server: Connection timed out If your config is right, it can be due to a protocol miss-match where your client has not enabled SMB3 but by default the other side (server) has enabled it. You can test this out to see with the smbclient tool........

  • CentOS 6 EOL yum repo won't work Error: Cannot find a valid baseurl for repo: base Solution


    yum update Loaded plugins: fastestmirror Setting up Install Process Determining fastest mirrors YumRepo Error: All mirror URLs are not using ftp, http[s] or file. Eg. Invalid release/repo/arch combination/ removing mirrorlist with no valid mirrors: /var/cache/yum/x86_64/6/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base You have mail in /var/spool/mail/root ........

  • Huion and Wacom Tablets How To Install in Linux Mint / Ubuntu and make the stylus work properly


    It took a lot of fiddling to make a Huion Kamvas 13 Pro work in Linux but it simple once you know what to do. Don't bother searching as it is unlkely there is a guide out there that will actually make your tablet work. It mainly comes down to the fact that the hid_uclogic kernel module is buggy or doesn't support MANYof these wacom based/Huion tablets properly. What was happening with me is that Ihad the Kamvas 13 Huion setup as a secondary screen/monitor.&nb........

  • mencoder instead of ffmpeg to join or concatenate video files with different audio streams


    The problem for me is that Ihad two videos with different types of audio streams. ffmpeg would join them but they would not play past the point of the join. So Iused mencoder like below and it joined the audio and made them both mp3 streams and it worked! -oac mp3lame specifies the audio to be convered into an mp3 stream using the lame codec. after the oac the two files are the ones to be joined. the -o is the name of the outp........

  • qemu-img convert formats vdi vmdk raw qcow2


    qemu-img can convert many formats. Here is an example of how to convert different images to different formats for QEMU-KVM The example above converts a raw windows2019.img file from QEMU to a Virtualbox .vdi qemu-img convert -f raw -Ovdi windows2019.img windows2019.vdi -f raw = this means the format of the source image (instead of raw it could be vdi, vmdi, qcow2 etc..)........

  • Linux Mint/Debian/Ubuntu/Centos Installer black grub screen and blank screen after trying to boot installer or main OS


    This happens to a lot of Nvidia users especially users of newer cards like the RTX series. If for example you are trying to boot and install Linux and you get a black and white grub2 screen instead of a nice graphical welcome installer, you probably suffer from this bug. It is normally followed by the user booting and finding they just have a blank/black screen. Here is the quick flow of steps to fix it: If you get a black grub scree........

  • Virtualbox Error Cannot register the hard disk because a hard disk with UUID already exists solution


    Cannot register the hard disk '/some/path/windows-marking.vdi' {f54def00-2252-43f5-9178-0998636cad61} because a hard disk '/other-path/windows-marking.vdi' with UUID {f54def00-2252-43f5-9178-0998636cad61} already exists. Result Code: NS_ERROR_INVALID_ARG (0x80070057) Component: VirtualBoxWrap Interface: IVirtualBox {0169423f-46b4-cde9-91af-1e9d5b6cd945} Callee RC: VBOX_E_OBJECT_NOT_FOUND (0x80BB0001)........

  • apcupsd how to setup and monitor APC UPS units


    It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc.. wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866 tar -zxvf apcupsd-3.14.14.tar.gz cd apcupsd-3.14.14 [root@somebox apcupsd-3.14.14]# ./conf........

  • Nvidia Ubuntu Linux Screentearing Video with solution driver


    This seems to happen on most if not all Nvidia cards but the good news is that if you are using any of the Linux drivers and have the nvidia-settings tool installed it is just a simple command. Solution: nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }" Enter the above command in your terminal and the screentearing will be fixed which is like enabling Tear Free on AMD cards.&........

  • How To Get Started on Ubuntu with gpt-2 OpenAI Text Prediction


    apt install software-properties-common add-apt-repository ppa:deadsnakes/ppa apt update apt install python3-pip apt install python3.7 curl gnupg python3.7-dev git ln -s /usr/bin/python3.7 /usr/bin/python3 pip3 install numpy keras_preprocessing curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add - echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........

  • Linux How To Change NIC Name to eth0 instead of enps33 or enp0s25


    Most newer distros inexplicably cause your NIC to have what Icall "random" non-standard name conventions because of systemd. This is a big problem for many people and especially those running servers. Imagine that you have a static IPconfigured for ens33 but then the hard disk is moved to a newer system, the NIC could be anything from ens33 to enp0s1, meaning that manual intervention is required to go and update the NIC config file (eg. /etc/network/interfa........

  • Convert data or file to base64 on a single line


    base64 has legitimate uses too and can be an easy way to store a file or data within actual code for developers to keep things in a single file. For example let's take an image we'll see for an application's background: base64 -w 0 some.jpg >some.jpg-base64 -w 0 makes it output to a single line which makes it easy to store in a variable. Without the -w 0 it will wrap over multiple lines.........

  • How To Install python 3.4 3.5 and up on Linux with wine - Working Solution


    This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu! Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........

  • OpenVZ vs LXC DIR mode poor security in LXC


    It is unfortunate that LXC's dir mode is completely insecure and allows way too much information from the host to be seen. I wonder if there will eventually be a way to break into the host filesystem or other container's storage? OpenVZ better security: [root@ev ~]# cat /proc/mdstat cat: /proc/mdstat: No such file or directory /dev/simfs 843G 740G 61G........

  • Convert and install to LUKS Encrypted Drive Ubuntu 18.04 19.10 Linux Mint and Debian Based Linux


    The reason for doing this is that the installer doesn't seem to work properly for LUKS and the server installer doesn't even support LUKS anymore. When you use the GUI install on Desktop for LUKS it won't boot and will just hang after you enter your password. So the only reliable way is to do it ourselves. 1.) Make a default minimal install of Ubuntu 2.) Have a secondary disk on the server or VM. 3.)........

  • CentOS 8 how to convert to a bootable mdadm RAID software array


    The cool thing here is that we only need 1 drive to make a RAID 10 or RAID 1 array, we just tell the Linux mdadm utility that the other drive is "missing" and we can then add our original drive to the array after booting into our new RAID array. Step#1 Install tools we need yum -y install mdadm rsync Step #2 Create your partitions on the drive that will be our RAID array Here I assume it is /dev........

  • ssh how to connect using a SOCKS 5 proxy with nc and proxycommand


    This is not about using ssh as a proxy, but rather, using a proxy when you are SSHing to another host and using ProxyCommand (where we normally use nc as our proxy tool). In newer versions of nc the syntax has changed to the following: ssh -o ProxyCommand="nc -x 127.0.0.1:1234" %h %p user@host The format must be like above in newer nc versions. Just be sure to change the 1234 to the port of your SOC........

  • how to use ifplugd in Linux to execute a command or script when a NIC cable is unplugged or plugged in


    It is fairly simple to use once you know how to use it. However, the tricky thing is that by default it doesn't seem to be active or listen on any interface on manually specified. How To Install ifplugd First we install ifplugd sudo apt install ifplugd Let's enable it on our desired device(s) vi /etc/default/ifplugd set this line as so:........

  • mpv / mplayer with Radeon / AMD GPU Video Card Driver enable VDPAU GPU Accelerated Video Decoding


    The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration. Let's manually play with vdpau to make sure it works before we make it permanent: First make sure you have libvdpau installed: sudo apt install vdpau-driver-all If yo........

  • Cannot Print PDF Solution and Howto Resize


    If you can print other PDFs but not a particular one it is very likely that the PDF size is A4 (the longer, skinnier Asian paper size) instead of the North American letter size ( 8.5" x 11"). This breaks printing in most cases. Or it may print if you find a program that ignores the size issue. Here is an example of an A4 being rejected by a printer in Ubuntu Linux via CUPS Cannot print PDF CUPS Samsung C460: Processin........

  • Debian Ubuntu and Linux Mint Broken Kernel After Date - New Extra Module Naming Convention


    I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules. One other weird thing is that sometimes........

  • python 3 pip cannot install mysql module


    python3 testserver.com-car-scraping.py html.txt Traceback (most recent call last): File "testserver.com-car-scraping.py", line 5, in import mysql.connector ImportError: No module named 'mysql' For some reason it won't install properly even though I have the mysql client on this machine installed too. Solution: You need the mys........

  • Virtualbox vbox not starting


    If you've just installed VBox and it is not starting or working, the most common problem is usually that you don't have your kernel source installed, which means there is no kernel driver for vbox so it can't work. You may get an error that says "Kernel driver not installed" in your Virtualbox. So the first thing you should do is install your kernel source by running this: sudo apt-get install linux-headers-`uname -r`........

  • ImageMagick Convert PDF Not Authorized


    You'll have to edit the policy.xml file to fix this: convert -density 300 output.pdf agreement.jpg convert.im6: not authorized `output.pdf' @ error/constitute.c/ReadImage/454. convert.im6: no images defined `agreement.jpg' @ error/convert.c/ConvertImageCommand/3044. sudo vi /etc/ImageMagick*/policy.xml Change policy domain="coder" rights="no........

  • ImageMagick Converted PDF to JPEG some files have a black background solution


    Use these flags: convert -alpha flatten -alpha remove "output.pdf" ljll.jpg And even the pesky black backgrounds should be gone after converting to jpg........

  • Cisco Unified Communications Manager / CUCM IP 8.6,10,12 Install Error Solution


    Install Errors on Version 12: This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5 on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error. *Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install. What really causes this even though you successfully install........

  • Cisco Unified Communications Manager 12 Install Errors on Proxmox/KVM


    The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs. qemu-kvm command: /usr/libexec/qemu-kvm -version QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard ........

  • Local Vs Universally Administered MAC Address NIC Refuses to come up


    2,6,A or E is what the second digit of your MAC address must be otherwise a lot of OS's will not work. They will say the NIC is down/not connected even though it is. This is because if the second digit is not set properly it will not view as a valid MAC or device uplink. This is especially an issue with VMs whether in QEMU etc.. if you are making your own MAC. MAC address is invalid c4:d1:aa:e5:10:05 To fix it just........

  • How to install and setup LXC Containers (OpenVZ alternative) on Centos 6 / 7


    If you don't aleady have it, you'll need EPEL Install LXC yum -y install lxc lxc-templates Loaded plugins: fastestmirror Setting up Install Process Loading mirror speeds from cached hostfile * base: mirror.it.ubc.ca * epel: mirrors.kernel.org * extras: mirror.it.ubc.ca * updates:........

  • Cisco Switch Reset To Factory Defaults


    This works on the 2000 and 3000 series generally. *The easy way is to just hold the mode button for 10+ seconds. The full/proper way is below: 1.) Either power on the unit and hold the "mode" button or hold the "mode" button until you see the below: 00:04:08: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram 00:04:08: %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configur........

  • VBOX VirtualBox How To Import Raw .img Disk File


    What you need to do if you have taken a dd or real raw image dump of a hard disk: VBoxManage convertdd windows2019-eval-template.img windows2019.vdi --format VDI The .img is the raw dd dump and the .vdi is the output file. --format VDIspecifies to output to .vdi format If you are in a pinch you can always use qemu-kvm binary and manually specify the .img as your disk and i........

  • Linux use growisofs to burn a larger file on a BD-R / Bluray Disc


    growisofs -Z /dev/sr0 critical.tar.gz.gpg Executing 'genisoimage critical.tar.gz.gpg | builtin_dd of=/dev/sr0 obs=32k seek=0' I: -input-charset not specified, using utf-8 (detected in locale settings) File critical.tar.gz.gpg is larger than 4GiB-1. -allow-limited-size was not specified. There is no way do represent this file size. Aborting. :-( write failed: Input/output error #remember to us........

  • mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument solution


    mdadm --manage /dev/md125 -a /dev/sdb4 mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument Dec 19 01:23:48 storageboxtest kernel: [ 2328.854491] md: sdb4 does not have a valid v1.2 superblock, not importing! Dec 19 01:23:48 storageboxtest kernel: [ 2328.854499] md: md_import_device returned -22 #zero the superblock and try again! mdadm --zero-superblock /dev/sdb4 mdadm --ma........

  • Adobe Acrobat Reader for Linux to use and view XFA Fillable Forms


    The reason for not being able to read one of these dreaded/ fillable "XFA" forms is because no Linux PDF reader that I'm aware of supports them. Part of this reasoning is for security. It is really silly, they should ban these XFA forms or at least replace the Please Wait with the non-fillable version. Download Adobe Reader 9.5 for Linux from here: This is the solution but only so much, at least for me I was able to view th........

  • Python and BeautifulSoup4's BS4's Decompose Method To Remove Unwanted Inner Tags


    < a href="/Products/MX72244"> < span class="c-shca-icon-item__body-name-brand"> ADATA < / span> &nbs........

  • How Does Cisco CUCM (Cisco Unified Communication Manager) Work?


    Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments. Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........

  • bash how to print out lines of text within a range from the first occurrence


    #get line number of occurrence in text file and then print out x lines from that point #get the line number of the first occurrence of our search text linenumber=`grep -n "someuniqueitem" inventory.txt|head -n1|cut -d ":" -f 1` #linestop represents how many lines after the occurring line we want to print out in this case "20" linestop=$((linenumber+20)) # sed prints out the line range we want f........

  • How To Mathematically Convert and Calculate Binary Value To Decimal Value


    When converting binary the easiest way is to write out a vertical list in a format like below and follow the formula in the table. Example Convert 1101 1111 to decimal. Step 1.) Write out the binary below in vertical form (leave lots of space on the left side). Keep this in mind that the "previous sum" starts at 0 on your first line. Step 2.) Formula: 2 *........

  • Centos 7 - Convert Minimal to Graphical GUI GNOME or KDE Desktop


    Did you just install the minimal version by accident or want to install the GUI? No need to reinstall just tell yum to do the work for you! You could actually have both installed and choose one as your preference on demand (although many people prefer GNOME's simplicity). Step 1.) Install Gnome and/or KDE. To install the GNOME Desktop on Centos 7: yum -y groups install "GNOME Desktop" To........

  • HP DL385 G7 Linux BIOS Update Flash


    wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe --2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85 Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1525561 (1.5........

  • pandoc convert markdown to html


    Where markdown=markdown language file and $output is your outputfile.html pandoc -f markdown $markdown -t html5 --toc --toc-depth=1 > $output ........

  • VMWare ESXi 6.7 SSH/PowerShell CLI Commands


    [root@localhost:~] BootModuleConfig.sh echo host-ind nfcd........

  • VMWare Vsphere VCSA Graphical Install Creates json


    yes it does create its own json ============================================ cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json 2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1 --> ........

  • Debian Mint Ubuntu compiling xmr-stak


    sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3 sudo apt-get install libcurl4-gnutls-dev git clone https://github.com/wolf9466/cpuminer-multi sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev git clone https://github.com/fireice-uk/xmr-stak-cpu.git make install cd bin chmod +x xmr-stak-cpu ./xmr-stak -O xmr........

  • convert.im6: Unknown field with tag 317 (0x13d) encountered. `TIFFReadDirectory' @ warning/tiff.c/TIFFWarnings/788.


    convert "file.TIF" "resize.jpg" convert.im6: Unknown field with tag 317 (0x13d) encountered. `TIFFReadDirectory' @ warning/tiff.c/TIFFWarnings/788. I've been getting this error in ImageMagick on some .tif files even though it seems to actually convert properly.........

  • OpenVZ container will not stop Child 546246 exited with status 1


    vzctl stop 4096 Removing stale lock file /vz/lock/4096.lck Stopping container ... Child 546213 exited with status 1 ^Z [1]+ Stopped vzctl stop 4096 ~]# rm /vz/lock/4096.lck rm: remove regular file `/vz/lock/4096.lck'? y ~]# vzctl stop 4096 Stopping container ... Child 546246 exited with status 1........

  • PayPal IPN Failed "result: IPN Handshake Invalid"


    This is often the result of PayPal's "item name" or another name having invalid characters or not supporting Unicode. 173.0.81.1 - - [17/Jul/2018:13:39:45 -0400] "POST //modules/gateways/callback/paypal.php HTTP/1.1" 406 - "-" "PayPal IPN ( https://www.paypal.com/ipn )" A good clue is if you check the debug output of the IPNand find a mandatory column empty. ........

  • linux mint image convert menu option missing solution


    Ialready have the caja-image-converter option installed but it shows nothing. Weirdly enough if you install nemo and nautilus converter it does show and work inside caja: The solution is to install *-image-converter sudo apt-get install *-image-converter Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'n........

  • ImageMagick How To Convert Specific PDF Pages or a Range


    A very handy feature of ImageMagick's convert command is that it can convert PDF's to other image formats like jpg but did you know you can even manually select a range or specific pages from the PDF? Here is an example of converting a range of pages from a PDF in this case pages 25 to 36: convert -density 300 "vSphere 6.5-1.pdf[25-36]" vsphere.jpg Here is an example of converti........

  • Linux Mint 18 Screen Goes Dark or Black After Screensaver or even when using the Desktop Solution


    You can search for this bug and it seems like it may be related to ecryptfs and is many years old. The symptoms are that you return to the computer and the screensaver was active or the screen was asleep/black and it doesn't seem to come back. But you check by SSH the computer is running fine and are frustrated you'll lose your running programs and have to reboot. There is a simple solution: Ctrl + Alt + F1 Ctrl +Alt + F8 Ba........

  • OVF Tool: Error: Task failed on server: This host does not support Intel VT-x. VMWare VCenter install On ESXi ERror


    Intel VT-X is enabled in Virtualbox but it doesn't seem to pass through the needed vmx extension despite the following variables on the host confirming it is enabled: cat /sys/module/kvm_intel/parameters/nested Y cat /sys/module/kvm_intel/parameters/ept Y OVF Tool: Disk progress: 99% OVF Tool: Transfer Completed OVF Tool: Powering on VM: Embedded-vCenter-Server-Appliance- OVF Tool: Task p........

  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........

  • OpenVPN auth-user-pass-verify ENV script error


    Starting with newer versions of OpenVPN Ibelieve 2.2+ you need to have "script-security 3" set or you can't execute a third party script. Prior to that you could also use the auth-user-pass-verify like this: auth-user-pass-verify ./validate.pl "$username $password $ip" via-env Options error: the --auth-user-pass-verify directive should have at most 2 parameters. To pass a list of arguments as one of the paramete........

  • OpenVPN error ERROR: Cannot ioctl TUNSETIFF tun: Operation not permitted (errno=1)


    This basically means that you are running as non-root and you need to be root to create the tun0 or tap0 device on OpenVPN. You could try sudo or adding the openvpn binary to the list of sudoers.........

  • Cannot create gradle for conversations


    The main issue is it looks like Java is not configured to accept the invalid ssl cert that is coming from the download location. Exception in thread "main" java.lang.RuntimeException: javax.net.ssl.SSLException: java.security.ProviderException: java.security.InvalidKeyException: EC parameters error export ANDROID_HOME=/home/user/Downloads/tools/ Conversations-master$ ./gradlew Downloading https://services.gradle.org/distributions/grad........

  • OpenVPN cannot ping remote IP routing loop issue after connecting


    Sometimes if you have a very basic configuration OpenVPN on the client side for some reason sends all traffic to the OpenVPN server IP through the tun0 which is of course impossible and creates a block or routing loop. This is because you need to use your normal ISP/LANgateway to hit the OpenVPN server if it is remote/offsite as is usually the case. So if you are connected to the OpenVPN through say a tun0 device and your routing is set to connect to the OpenVPN&nbs........

  • Linux Mint Black Screen after boot no graphics solution


    This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help. Here is the short end of the stick that fixed it: sudo apt-get install mdm mate-desktop-environment Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........

  • imagemagick convert to chop off top of image


    This is useful if you have a bunch of images/scans where the same area at the top needs to be chopped. Sometimes the -trim option (such as the case of white space on top)is wrong and ends up cropping the image and losing some text. ImageMagick's convert is very useful but tricky to find some things out as I find it to be less than intuitive sometimes. Chopping off the bottom convert -crop -0-400 image.jpg image.pdf........

  • Linux Mint Ubuntu Debian How To Disable Webcam Automatically Onboot To Prevent Spying and Privacy Violations


    It is well known hackers, the NSA, CIA and other groups have created malware to secretly turn on your webcam and microphone on your phone, tv etc.. But fortunately on our computers and laptops we have some options. Most webcams use the "uvcvideo" kernel module / driver. You can disable this in two ways on boot. I recommend both just as a failsafe. Disable it on rc.local once your system boots automatically Add the followi........

  • Debian Linux Mint Ubuntu Disable Automatic apt-get update


    sudo chmod 000 /etc/cron.daily/apt-compat This is the easiest way to disable the cron without anything more invasive like deleting the file. After that you won't have anymore apt-get's starting. This can be critical for systems without much extra RAMthat is not in use. I've seen systems that have swapped and crashed over apt-get.........

  • vzquota : (error) Quota on syscall for id 4532: No such file or directory vzquota on failed [3] OpenVZ Error and Solution


    Starting container... vzquota : (error) Quota on syscall for id 4532: No such file or directory vzquota on failed [3] Solution vzquota drop 4532 Then start the container and it should work. It actually happened after migrating the VPS manually to ano........

  • OpenVZ Solutions vzquota : (error) Can't open quota file for id 123123, maybe you need to reinitialize quota: No such file or directory


    Error: Unable to apply new quota values: quota not running Container start failed (try to check kernel messages, e.g. "dmesg | tail") Killing container ... Container was stopped Error: Unable to apply new quota values: quota not running Can't umount /vz/private/123123: Invalid argument [root@rtt 123123]# vzquota on 123123 vzquota : (error) Can't open quota file for id 123123, maybe you need to reinit........

  • "Object of class WP_Term could not be converted to string"


    Normally when I've seen this it's when you are using a variable like a normal string when in fact it's actually an array such as this example: [Tue Mar 13 04:22:35 2018] [error] PHP Catchable fatal error: Object of class WP_Term could not be converted to string in /vhost/httpdocs/wp-content/plugins/wp-instagram-post/classes/class-woo-igp.php on line 578 &nbs........

  • Linux input/output error invalid program cannot read data on some CD-Rs and DVD-Rs on ASUS BW-16D1HT


    I've never seen this before in all of my years. Ihave some very old CDs and DVDs 12-15 years old that seem not to work in this BD-R/DVD-R/CD-R Asus drive. The discs are fine actually and ironically they even work fine on a normal LG USB based BD-R drive! Here are the errors in Linux: [2914936.884924] attempt to access beyond end of device [2914936.884927] loop1: rw=0, want=730424, limit=688384 [2914954.556873] attempt to........

  • Installing SSL Certificate with Chain Intermediary CA File


    Some of the cheaper or newer SSL suppliers will require this to work properly (otherwise you may be prompted that the cert is invalid when it's not the case but it will certainly scare off your users!). In the Apache vhost conf for the domain here is what you add: SSLCACertificateFile /path/to/your/cafile.pem Here is a full example of an SSL Vhost config in Apache using a CA Certificate file ........

  • MySQL Cannot Update/Write to any database table solution


    This happened on Centos for no apparent reason with no obvious issue in the logs. Data could be read fine but not written (possibly due to some corruption or out of memory issue in the OpenVZ container is the best guess). All mysql update and insert queries failed freezing without any error log on any database and table. Tried to restart: service mysqld restart Timeout error occurred trying to stop MySQL........

  • PHP geoip.so fatal error Solution


    PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0 Remove the GEOIP from PHP: php71w-pecl-geoip-1.1.1-1.w6.x86_64 PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the........

  • pcimodules and lspci not working alternative solution


    pcimodules no longer works it produces nothing probably because the format of /sys/bus/pci is different. lspci -k doesn't work on older lspci versions. pciutils can be compiled but it won't work if you have an old system and compile on a newer glibc. iteriate through /sys/bus/pci/devices/*/modalias cat /sys/bus/pci/devices/*/modalias pci:v00008086d00001237sv00000000sd00000000bc06sc00i00 pci:v00008086d00007000sv0000000........

  • h264 DVR security camera footage cannot be played


    This is not just a Linux issue but a general issue most software or hardware players cannot play the resulting exported/backed up format of .h264 from DVR security camera footage for some silly reason. There is a simple solution in Linux using ffmpeg fortunately. Convert the .h264 file into mp4 ffmpeg -i yourfile.h264 -codec copy video.mp4 play dvr .h264 file........

  • css responsive images


    add this style="background-size: contain;max-width: 100%; height: auto;" to your img code. Example: ........

  • FreeBSD/OpenBSD OpenVPN Client error "Cannot allocate TUN/TAP dev dynamically"


    I have never had this error on Linux and this is running FreeBSD as root: Wed Aug 9 04:29:34 2017 us=329050 Cannot allocate TUN/TAP dev dynamically Wed Aug 9 04:29:34 2017 us=329832 Exiting due to fatal error The Solution you need a kernel module that is for some reason not automatically loaded like Linux: kldload if_tap........

  • Centos 5.9 Working Vault Repo file


    Centos 5 is not supported running yum will produce an error like this: YumRepo Error: All mirror URLs are not using ftp, http[s] or file. Eg. Invalid release/ removing mirrorlist with no valid mirrors: /var/cache/yum/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base Solution - Update this file CentOS-Base.repo # CentOS-Base.repo........

  • Cannot allocate TUN/TAP dev dynamically - FreeBSD/OpenBSD OpenVPN Client error Solution


    I have never had this error on Linux and this is running FreeBSD as root: Wed Aug 9 04:29:34 2017 us=329050 Cannot allocate TUN/TAP dev dynamically Wed Aug 9 04:29:34 2017 us=329832 Exiting due to fatal error The Solution You need a kernel module that is for some reason not automatically loaded like Linux: kldload if_tap........

  • Wine uninstalled broken on Linux Mint


    Solution: Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt sudo aptitude install wine The following NEW packages will be installed: ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6 wine1.6-amd64{a} wine1.6-i386:i386{a} The following packages will be REMOVED:........

  • ffmpeg trouble concatenating similar but different files


    When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right. Solution for me: My example uses 3 videos in total so "n=3" and a=1 to include audio. ffmpeg -threads 12 -i file1.mp4 -........

  • ffmpeg Unable to Use Hardware Encoding with Nvidia 3.40 Driver and GT210 card


    I believe from what I've read that this card's driver doesn't support the features after trying all known troubleshooting methods. ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload -c:v hevc_nvenc -profile main -preset slow -rc vbr_hq -c:a copy uservideoRendered.mp4-test ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload........

  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd ffmpeg-3.3.2/ ./configure --disable-yasm install prefix /usr/local source path ........

  • OpenVZ error : Container start failed (try to check kernel messages, e.g. "dmesg | tail") Locked by: pid 166638, cmdline vzctl start 888171


    This container won't start after exhausting its memory. There are no relevant or helpful messages in dmesg or vzctl.log as well. Standard troubleshooting such as disabling PPP etc has not helped. 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Locked by: pid 166029, cmdline vzctl start 888171 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container already locked 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container was stopped 2017-07........

  • Centos 7 Cudaminer Nvidia setup guide


    I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us yum install automake curl openssl-devel libcurl-devel gcc gcc-c++ yum -y install kernel-devel-`uname -r` yum -y install unzip #the........

  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........

  • imagemagick pdf convert error solution - **** Warning: can't process font stream, loading font by the name. Can't find CMap Identity-UTF16-H building a CIDDecoding resource. Warning: falling back to Identity ordering **** Error reading a conte


    **** Warning: can't process font stream, loading font by the name. Can't find CMap Identity-UTF16-H building a CIDDecoding resource. Warning: falling back to Identity ordering **** Error reading a content stream. The page may be incomplete. **** File did not complete the page properly and may be damaged. **** This file had errors that were repaired or ignored. ****........

  • Nvidia Linux Mint/Ubuntu screentearing horizontal line solution


    Finally after ages I found the solution which is on many pages on the net but not obvious and should have been standard or more common info! Instant Solution: Type this into the terminal (unfortunately the driver config menu doesn't have the option as itis hidden): nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceCompositionPipeline = On }" Make permanent Cli........

  • Apache SSL very slow response with Firefox Freezes/Loads Very slow when checking self-signed SSL certificate


    I was sure this was a Centos bug with OpenSSL, Apache, MySQL or even PHP. I tried everything but nothing helped. One clue is that if you check the Apache logs you will see nothing in the access logs until minutes later (this means Firefox has not even passed your request to the remote Apache/htttpd server). When even accepting the invalid certificate message that would show up minutes later when trying to "View the Certificate" Firefox would freeze. This bu........

  • mencoder bmovl error vf_bmovl: Unknown command: ''. Ignoring.


    Based on this tutorial: http://www.linuxjournal.com/content/overlay-images-video-using-mplayer-and-mencoder mencoder -oac pcm -ovc raw -vf bmovl=0:0:tfifo -o $output $file vf_bmovl: Unknown command: ''. Ignoring. ........

  • Linux Mint/Ubuntu/Debian Nvidia driver becomes slow graphics performance issue


    I've had this issue since Ubuntu 9 and now even on Linux Mint 17 no matter what latest version of the Nvidia proprietary driver that I use. It just becomes slower and slower and only gets better after rebooting or restarting Xorg. Someone here has it as well https://askubuntu.com/questions/822449/graphics-becomes-slow-after-a-while/917886 It's very fru........

  • How to convert xlsx/xls Excel file into csv


    A lot of times these files seem to lag and be incredibly slow even if just a few dozens rows of data. Here is how you can convert it with "gnumeric": ssconvert file.xlsx file.csv You may get lots of weird errors like this but the conversion seems to work fine: (ssconvert:15244): GLib-GObject-WARNING **: g_object_set_valist: object class 'SheetObjectImage' has no property named 'style'........

  • Centos 7 Migration Guide from Centos 6


    Centos 7 is no cakewalk, there are many fundamental features and basic utilities that are missing or even completely renamed or different! Another shocking thing is to check your NIC it is set by default to not turn on when booting! And by the way there is no more standard eth0 the NIC convention is now "enp0s3" vi /etc/sysconfig/network-scripts/ifcfg-enp0s3........

  • Linux Ubuntu Mint how to view RAW image files .arw?


    Ijust use "ufraw" and it does the trick perfectly. Now Iwish I could figure out how to batch convert them into .jpg with ImageMagick (it seems support for .raw is not guaranteed or it has to be compiled in). apt-get install ufraw........

  • What happens when you unplug 1 or more devices from an mdadm RAID array to simulate a failure in Linux Ubuntu/Centos/Debian?


    In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below. mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore. [45817.162728] ata4: exception........

  • mdadm and lvm how to completely disable and remove vg/pv/lv


    In short the solution is just to use vgremove for the actual /dev/mapper device: vgremove /dev/mapper/backups-backuplv box mnt # mdadm --manage /dev/md8 --stop mdadm: Cannot get exclusive access to /dev/md8:Perhaps a running process, mounted filesystem or active volume group? box mnt # lv lvchange lvconvert lvcreate l........

  • Unable to mount location Failed to retrieve share list from server: No such file or directory solution


    Cannot even "Browse Network" when clicking on "Windows Network" Unable to mount location Failed to retrieve share list from server: No such file or directory logs: [2017/02/14 00:16:44.271314, 0] ../source3/nmbd/nmbd.c:58(terminate) Got SIGTERM: going down... [2017/02/13 17:35:41.797944, 0] ../lib/util/become_daemon.c:124(daemon_ready) &........

  • ImageMagick how to trim white space automatically in Linux


    convert -trim yourimage.png That's all there is to it, very simple, clean and quick!........

  • apc_shm_attach: shmat failed: in Unknown on line 0 & apc_shm_create: shmget(0, 67108864, 914) failed PHP Solution


    PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the chosen SHM segment size is higher than the operation system allows. Linux has usually a default limit of 32MB per segment. in Unknown on line 0 PHP Fatal error: PHP Startup: apc_shm_attach: shmat failed: in Unknown on line 0 This error is not at all fun because it actually prevents Apache/httpd from starting or working at all. It will........

  • PYCURL ERROR 22 - The requested URL returned error: 404 Not Found Solution


    # yum -y install qemu-kvm Loaded plugins: fastestmirror Setting up Install Process Loading mirror speeds from cached hostfile * base: mirror.lzu.edu.cn * elrepo: ftp.utexas.edu * epel: ftp.jaist.ac.jp * extras: mirrors.aliyun.com * openvz-kernel-rhel6: mirror.fdcservers.net * openvz-utils: mirror.fdcservers.net * updates: mirrors.nwsuaf.edu.cn Resolving Dependencies........

  • OpenVZ mass ip update


    The file ipupdate.txt should look like this: ip.ip.ip.ip ctid while read -r; do ip=$REPLY setip=`echo $ip|awk '{print $1}'` ctid=`echo $ip|awk '{print $2}'` echo "vzctl set $ctid --ipadd $setip --save" vzctl set $ctid --ipadd $setip --save done < ipupdate.txt........

  • OpenVZ Solution CPT ERR: c02fa000,73 :CPT: lock fd is closed incorrectly: 1 and vps-net_add ERROR: Unable to add route ip route add 192.168.5.2 dev venet0


    The only solution after trying many suggestions was to simply restart the "vz" service (definitely not preferable). Even doing an ifdown and ifup for venet0 did not help. ifup venet0 Bringing up interface venet0: Configuring interface venet0: net.ipv4.conf.venet0.send_redirects = 0 RTNETLINK answers: Network is down Some errors from log: CPT ERR: d2dc60........

  • forcedeth MCP55 Nforce3600 Nvidia Network NIC Card Not working in Linux at 1gigabit speeds


    Now many people report this card simply not working in various Linux distros and kernels. My issue is different, it always works at 100mbit (eg. plugged into a 100mbit switch) but no matter what 1000M/gigabit switch I would try, it would never work. The link would be up (the lights were on) and the OS detected the link as being up as well but it wouldn't work at all and could not pass data in or out (not even a ack/ping). There is one simple solution and command........

  • How to Normalize and Increase the Volume on M4A files in Linux


    M4A is a weird format, so you have to be creative here is a quick copy of what I did. Basically you need to convert to .wav to make use of them and thenI converted the resulting .wav into an mp3 (nice small file size and basically universally playable): ======= sudo apt-get install mpg321 mp3gain faad normalize lame faad "Voice 002 (copy).m4a" faad "Voice 002 (copy).m4a"........

  • OpenVZ Migration Hostnode Containers from Centos 5 to Centos 6


    migrating from an old OpenVZ (Centos 5) to new OpenVZ (Centos 6) Also if migrating from 32-bit HN to 64-bit your RAM will probably be much bigger than it should be! 16x bigger eg. 32bit HN: total used free shared buffers cached Mem:&nb........

  • OpenVZ Error: Failed to load 2nd level quota solution


    Syncing private Live migrating container... Syncing 2nd level quota 11000: invalid option -- F Usage: vzdqload quotaid [-c file] commands Loads user/group qouta information from stdin into quota file. -c file use given quota file Commands specify what user/group information to load: -G grace time -U disk limits........

  • Openvz error solutions Container already locked (error) can't lock quota file, some quota operations are performing for id 1200


    rm /vz/lock/1200.lck rm: remove regular file `/vz/lock/1200.lck'? y vzctl start 1200 Container already locked vzctl start 1200 Starting container ... vzquota : (error) can't lock quota file, some quota operations are performing for id 1200 vzquota on failed [7] vzquota off 1200 vzctl start 1200 vzquota on 1200 root@rttbox ~]# vzquota off 1200 vzquota : (........

  • possible SYN flooding on port 80. Sending cookies.


    Errors like this are shown on high usage servers and ports so it is common to see it on http and even imap ports: possible SYN flooding on port 80. Sending cookies. The Linux kernel will even detect flooding on OpenVZ containers: possible SYN flooding on ctid 6000, port 993. Sending cookies. In many cases this is not an issue and is more so simply a result of regular, but high usage traffic.........

  • Openvz kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3)


    kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3) Varying opinions are out there but in general it seems like the most common culprit is a lack of privvmpages, with a modern OpenVZ system the best way is to set privvmpages as equal to what your RAM is and this has resolved the messages on another system. If it's truly a TCP issue you can adjust the following parameters:........

  • Ubuntu/Debian OpenVZ Template Problems No Networking and SSH not starting


    It all comes down to a bug essentially where you are running an older kernel that doesn't support the newer Debian templates. The solution is to update your OpenVZ kernel. Here are some symptoms of the problem/lack of kernel support: Ubuntu Template 12.04 requires a manual network start: service networking start sshd will not start: /usr/sbin/sshd PRNG is not seeded mknod /dev/random c 1 8........

  • openvpn 2.3.10-1.el6 issues auth-env does not work correctly for auth-user-pass-verify


    openvpn 2.3.10-1.el6 issues in the .conf auth-user-pass-verify "passwordcheck $username $password $untrusted_ip" via-env auth-env does not work correctly in OpenVPN 2.3: Sat Apr 23 02:30:22 2016 - $username - $untrusted_ip - login failure But OpenVPN 2.2 does work as expected. It could be that the specified script automatically receive........

  • Nvidia Linux Card not working due to LSI 9200/SAS2008 IRQ conflict


    At first my BIOS said the card may not work right because there is no more option ROM space. I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly. But it still cannot initialize the card properly(does not work): [ 33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........

  • SAS2008 LSI 9200-E Linux Upgrade Flash Firmware with sas2flash


    Download from here http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9200-8e#downloads sudo Installer_P20_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash -listall LSI Corporation SAS2 Flash Utility Version 20.00.00.00 (2014.09.18) Copyright (c) 2008-2014 LSI Corporation. All rights reserved &nbs........

  • iptables: Applying firewall rules: iptables-restore: line 40 failed


    service iptables start iptables: Applying firewall rules: iptables-restore: line 40 failed [FAILED]........

  • Linksys E2500 DD-WRT Upgrade Instructions and Enabling 5ghz with Tomato Firmware


    1.) Flash directly to this file: http://tomato.groov.pl/download/K26RT-N/build5x-132-EN/Linksys%20E-series/tomato-E2500-NVRAM60K-1.28.RT-N5x-MIPSR2-132-Max.zip *I was never able to get the larger "Mega" file to work, at least not initially so I recommend the file above. To enable 5ghz I had to do the "Clear NVRAM" Option before it was shown. 2.) Or if you don't need 5ghz (most devices do not support it and cannot........

  • Linux Debian/Ubuntu/Centos How To Force Internet Traffic Through PPTP L2TP OpenVPN Account Only


    The following assumes the computer is local/physical to you and/or it always has a LANIP so it can be accessed on site without having a default gateway. The key to this is not to set a default gateway for your computer or you can set a script on boot or other time to delete the gateway (where eth0 is the NIC you are using): route del default eth0 50.80.20.2 is the VPN server you connect to 192.168.1.1 is your........

  • Avocent 8020 KVM Java Icedtea Viewer


    This command in Debian/Ubuntu/Mint will get everything need installed for most Java based KVM viewers: sudo apt install icedtea-netx The following additional packages will be installed: ca-certificates-java icedtea-netx-common openjdk-8-jre openjdk-8-jre-headless It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post.........

  • Centos installing grub problems suspect gpt problem


    grub> root (hd0,0) root (hd0,0) Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) But if you do: root (hd1,0) setup (hd1) it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical). Checking if "/boot/grub/........

  • Cannot get mono to work properly on Linux Mint


    mono/wine not working in Ubuntu/Linux Mint/Debian: The assembly mscorlib.dll was not found or could not be loaded. It should have been installed in the `/usr/lib/mono/2.0/mscorlib.dll' directory. solution: sudo apt-get install mono-complete Problems: mono does not work well for even simple things like a Winrar self extracting .exe fi........

  • imagemagick converting jpg images to pdf file size too large


    If the file size is too large you need to resize them on the fly: convert -resize 25% *.jpg output.pdf The resize flag takes a % I have tried without and it seems to take it as pixels and becomes way too small. You can also play with the "-quality 25" flag to decrease file size even more.........

  • convert imagemagick pdf to jpg is too small when converting solution


    It is a common issue and here is the solution (increase the density/dpi): convert -density 120 some.pdf output.jpg You will need to play with the density setting to get the perfect file size and resolution. If you want a smaller file you can always use the "-quality" switch and eg. -quality 25 would be 25%/100 quality........

  • OpenVZ how to enable FUSE in the container


    vzctl set 2 --devnodes fuse:rw --save Where "2" is the ctid........

  • Debian 8 Jessie in Linux OpenVZ Container does not work on Centos host


    It sounds like this is corrected in later versions of the OpenVZ kernel but Iam not sure, it may also be that a much newer kernel is needed and Centos may not have a recent enough kernel. *Debain 7.0 however does work fine as a temporary fix or work around. Debian 8 OpenVZ no IP and networking not working: lo Link encap:Local Loopback  ........

  • How to manually save bash history


    This is useful in the case you are not properly logged in via an OpenVZ session or even a normal SSH session that you fear may go down(if the connection is broken the history is not saved). Save your bash_history like this: history -w ~/.bash_history You can always change the above to another file eg /tm........

  • Linux how to combine images into a single one using convert from ImageMagick


    convert -append file1.jpg file2.jpg output.jpg The above is all there is to it. file1.jpg and file2.jpg are the ones to combine (the order is used)and output.jpg is the combined image.........

  • Centos 6 how to guide convert LVM non-RAID into mdadm 1/10 RAID array live without reinstalling


    Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access. So in this case you add a second physical or disk or already ha........

  • openvz yum problem Centos 6.5 cannot find file on mirror:


    #solution Edit /etc/yum.repos.d/openvz.repo For the first two entries comment out #mirrorlist and uncomment #baseurl and then it worked openvz yum problem Centos 6.5 cannot find file on mirror: yum update Loaded plugins: fastestmirror Determining fastest mirrors * openvz-kernel-rhel6: mirrors.ustc.edu.cn * openvz-utils: mirrors.ustc.edu.cn base ........

  • ONVIF Linux Security Camera Setup


    First of all this seems to apply to many ONVIF devices Hard coded IP: 192.168.1.10 (yes not kidding no DHCP!) 00:12:12:9C:C2:00 To view RTSP stream use VLC, or openRTSP or other RTSP capable software: rtsp://192.168.1.10/user=admin_password=tlJwpbo6_channel=1_stream=0.sdp user: admin password: blank http://ip/Login.htm Uses Quicktime and is a poor quality picture and slow Cannot change pass........

  • Installing zoneminder on Ubuntu/Debian Linux Howto


    sudo apt-get install zoneminder [sudo] password for one: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libuser-perl python-evince kdebase-apps kwrite unixodbc libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp python-mediaprof........

  • status: { DRDY ERR } error: { ICRC ABRT } failed command: WRITE FPDMA QUEUED MCP55 Linux Errors


    [ 2868.041375] ata1: EH in SWNCQ mode,QC:qc_active 0x40 sactive 0x40 [ 2868.041554] ata1: SWNCQ:qc_active 0x40 defer_bits 0x0 last_issue_tag 0x6 [ 2868.041556] dhfis 0x40 dmafis 0x40 sdbfis 0x20 [ 2868.041874] ata1: ATA_REG 0x41 ERR_REG 0x84 [ 2868.042013] ata1: tag : dhfis dmafis sdbfis sactive [ 2868.042163] ata1: tag 0x6: 1 1 0 1 [ 2868.042301] ata1.00: exception Emask 0x1 SAct 0x40 SErr 0x400000 action 0x6 frozen [........

  • Centos/obfsproxy errors


    I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar: yum -y install python-pip python-devel No package python-pip available. #install the EPEL repo python-pip install obfsproxy python-pip install obfsproxy -bash: python-pip: command not found pip install obfsproxy &........

  • OpenVZ Install Guide Again / Quick Setup


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl #enable ip_forward sed -i s/'net.ipv4.ip_forward = 0'/'net.ipv4.ip_forward = 1'/g /etc/sysctl.conf #all interfaces should not send redirects echo "net.ipv4.conf.default.send_redirects = 1" >> /etc/sysctl.conf echo "net.ipv4.co........

  • mdadm create raid10 array with only 2 drives


    mdadm --create /dev/md1 --level 10 --raid-devices=2 /dev/sdb2 /dev/sdc2 --layout=f2 --metadata=0.90 Note that layout=f2 or layout=n2 is very important as without it you'll get a complaint like this: mdadm --create /dev/md0 --level 10 --raid-devices /dev/sdb1 /dev/sdc1 missing missing mdadm: invalid number of raid devices: /dev/sdb1 It is basically more like a prop........

  • Openvz Enable netadmin


    vzctl set $CTID --devnodes net/tun:rw --capability net_admin:on --save........

  • Dell CS24 NV5/NV7 Gigabyte GA-3CESL-RH Motherboard ROM Chip info


    If you remove the white label on the chip (near the CMOS battery) you will find the following details about it: SST 49LF080A 33-4C-NHE It is the PLCC32 type and can be pried and removed safely (but be very careful) with an eye glass flat head screw driver. If you just have a bad flash you may be able to reprogram your original or just buy another one with the part# above and reprogram it. This is great news for people who have bricked th........

  • Weird Ubuntu Issues with NVIDIA driver/Compiz


    1.) My screensaver would take a long time to disable after hitting a key. 2.) Usually errors like below will follow. 3.) Compiz sometimes uses 100% or high CPU 4.) My window controls will disable (eg. the minimize, maximize and close buttons). It seems like Compiz or appearance/effects disable themselves. Re-enabling Desktop Effects under Appearance temporarily fixes it. 5.) high load in general from things like "Migration" pr........

  • Dell CS24-NV7 lspci dmidecode info


    0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2) 0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3) 0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3) 0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1) 0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2) 0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 0000:00:05.1 I........

  • Dell CS24,FS12 NV5 and NV7 1U Server Information & Parts


    Motherboard: Gigabyte GA-3CESL: http://b2b.gigabyte.com/products/product-page.aspx?pid=2658#dl Dell Part Numbers for the motherboard: R1232 R1232L R2232S SERVER MOTHERBOARD GENUINE 408P9 CN-0408P9 GA-3CESL Manual Download here RAMSlots: 16 (8 controlled by each CPU) RAMType: DDR2 ECC 5300P........

  • Linux CLI command to rip audio CD and encode convert to MP3s


    This command rips the audio tracks to .wav files *I recommend making a new directory with the name of the audio disc first and executing everything from within that directory below. cdparanoia -B Use the lame mp3 encoder to encode each one with this script: *Note that this will encode any other files ending in "cdda.wav" for track in `ls *cdda.wav`; do lame -b 192 $track; done........

  • VPN Account Buyers Guide and General Info


    What matters most about VPNproviders in 2024? We are highly suspicious of VERYLARGE VPN providers that have LOW PRICES and HUGE DISCOUNTS. The suspicion is that for those who know what costs are involved to purchase thousands of IPs and servers are not small. At the prices that many of the big mainstream providers offer, it is likely unprofitable or barely profitable. Then, how are those companies making money or is that even the goal? There use........

  • How to install grub on virtio KVM with Linux


    I messed up the bootloader by accident on a standard Centos 6.3 install because I turned the /dev/vda1 boot partition into an mdadm raid 1. This was all done correctly aside from one point Ididn't realize was an issue metadata=00.90 is the only thing that will allow you to boot (otherwise grub won't work and you won't boot). So the next step is rescue mode from a CD right? The problem you will find is that grub does not detect your hard drives, this is Ibelieve is be........

  • OpenVZ vzctl update changes how iptables work - iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. updated solution


    Are you getting the same old error message even though your iptables settings for OpenVZ are correct? iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. The reason is because in newer vzctl the old way of setting IPTABLES="" in vz.conf is completely deprecated (I spent some time fiddling wondering why my settings were correct but........

  • Disable linux bash proxy ENV export variable


    if you type Export and see something like this: declare -x all_proxy="socks://127.0.0.1:22000/" Most sites assume and tell you to check your .bashrc or /etc/profile /etc/bash.bashrc which may not apply if you've unknowingly or forgot that you setup a proxy from your GUI such as Gnome. To check in Gnome if you have a permanent proxy do the following: System -> Settings -> Network Proxy........

  • Vbox/Virtualbox devices grayed out for non-root user solution


    It is a permissions issue that is hard to fix. All but one USB device is greyed out. I am already a member of "vboxusers" I have already enabled and disabled USB support for the guest. I have already reinstalled the latest VBOx guest editions If running as root it all works fine Changing........

  • Directadmin compile error solution cc: Internal error: Killed (program cc1)


    cc: Internal error: Killed (program cc1) Please submit a full bug report. See for instructions. make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1 make: *** Waiting for unfinished jobs.... Stopping crond: ........

  • bash shellshock how to manually patch when there is no update for Centos/Debian/Ubuntu/Fedora


    wget http://ftp.gnu.org/gnu/bash/bash-4.3.tar.gz tar xzvf bash-4.3.tar.gz cd bash-4.3/ wget --no-directories --level 1 --recursive http://ftp.gnu.org/gnu/bash/bash-4.3-patches/ for patch in `ls bash43-*|grep -v .sig$`; do echo applying "$patch" patch -p0 < $patch done ./configure;make;make install #it will install to /usr/bin/bash but if your bash is somewhere else you need to overwrite the old one.........

  • OpenVZ Howto disable ploop and switch back to SIMFS


    It's simple, just edit /etc/vz/vz.conf and add or change the following: VE_LAYOUT=simfs........

  • Openvz iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. solution


    iptables -t nat -A PREROUTING -p tcp -m tcp -d 192.168.2.1/32 --dport 3389 -j DNAT --to-destination 192.168.5.2:3389 iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. The above is often because you don't have the correct modules loaded on the hostnode or enabled for the container but in some cases it's actually a weird openvz setting. Che........

  • Openvz 2014-08-12T19:05:55-0400 vzctl : CT 391801 : Unable to start init, probably incorrect template 2014-08-12T19:05:55-0400 vzctl : CT 391801 : Container start failed


    2014-08-12T19:05:55-0400 vzctl : CT 391801 : Unable to start init, probably incorrect template 2014-08-12T19:05:55-0400 vzctl : CT 391801 : Container start failed This was caused by trying to run a 64-bit template on a 32-bit kernel hostnode which is obviously impossible. The solution is to use a 32-bit template or upgrade the hostnode to 64-bit.........

  • Thunderbird Error An error occurred while loading or saving configuration information for thunderbird. Some of your configuration settings may not work properly.


    This error seems to happen randomly and especially when trying to send e-mails. Apparently it's a long-standing GNome bug but is also partially the default of Thunderbird depending on who you ask. There is no known fix that I'm aware of except to upgrade gnome and the gvfs package but this is not an option for older versions/distributions. An error occurred while loading or saving configuration information for thunderbird. Some of your configuration settings may not........

  • CPanel Link to all of the command line options


    CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting.  I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts. So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........

  • PayPal Convert BuyNow Button to Plain HTML Link


    Say if you have a form/button like this: ........

  • OpenVZ Unable to stop container


    vzctl stop ctid Killing container ... Child 1033348 exited with status 7 Unable to stop container vzctl enter ctid enter into CT 29831 failed Some have suggested using vzctl stop ctid --fast which does not work. The only thing that seems to work is restarting the vz service.........

  • phpBB create new email hash manually when modifying or adding user manually directly through MySQL


    Many may ask why would you need to do this? When upgrading from phpBB 2 to 3 the conversion does not keep the admin user you create. If your old admin user has an email address associated that no longer works or is accessible this makes it impossible to reset the admin password. Some may just say "I'll just manually edit the e-mail address" but it won't work and phpBB will fail to find that user if you don't update the "user_email_hash" field but how do........

  • SolusVM error error: Failed to create domain from /home/kvm/kvm101/kvm101.xml error: cannot open file '/dev//dev/kvmcontainer/kvm101_img': No such file or directory


    error: Failed to create domain from /home/kvm/kvm101/kvm101.xml error: cannot open file '/dev//dev/kvmcontainer/kvm101_img': No such file or directory This is caused by what we consider a quark in SolusVMthat Ihelped a client with. SolusVMhas as config for the "LVMvolume name" and does not enforce any convention. Naturally most technical people would use the actual path eg "/dev/kvmcontainer". However th........

  • heatbeat ERROR: NV failure (msgfromsteam): [>>> ] ha_msg_add_nv_depth: line doesn't contain '='


    Apr 17 11:55:47 Cluster01 heartbeat: [1426]: WARN: ha_msg_add_nv_depth: line doesn't contain '=' Apr 17 11:55:47 Cluster01 heartbeat: [1426]: info: >>> Apr 17 11:55:47 Cluster01 heartbeat: [1426]: ERROR: NV failure (msgfromsteam): [>>> ] I have never been able to reproduce the above but it happened on heartbeat-3.04-2 when Itook a node down for testing. One thing Ibelieve caused it was by configuring ha.cf........

  • drbd won't sync 8.3.13 on OpenVZ kernel


    I used the matching 8.3.13 utilities and it didn't work but strangely the newer 8.3.16 which makes DRBD complain works just fine. GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51  0: cs:SyncSource ro:Secondary/Primary ds:UpToDate/Inconsistent A r-----     ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5236960   &am........

  • Openvz Can't load ploop library: libploop.so: cannot open shared object file: No such file or directory


    Can't load ploop library: libploop.so: cannot open shared object file: No such file or directory The above happens when you haven't installed the ploop tools: yum -y install ploop........

  • OpenVZ avoid vzctl 4.7 and ploop


    OpenVZ has made vzctl version 4.7 default to using ploop which is a big annoyance.  No one wants it otherwise we'd use Xen or KVM. Make sure to manually specify vzctl 4.6.1 or you will have issues with old scripts breaking since it defaults to using ploop (a single image like Xen/KVM). Here's a list to old versions of vzctl.........

  • Howto Convert Xen Image to KVM


    #count=10000 makes an image of 10000MB make sure your image is at least the same as your existing dd if=/dev/zero of=yourimage.img bs=1M count=10000 # losetup -fv newimage.raw # fdisk -cu /dev/loop0 # kpartx -a /dev/loop0 # dd if= of=/dev/mapper/loop0p1 # e2fsck -f /dev/mapper/loop0p1 # resize2fs /dev/mapper/loop0p1 # a lot of guides tell you to edit /etc/fst........

  • OpenVZ mismatched kernel and dev when compiling.


    ./configure ./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory Error: kernel version not found. Please make sure your kernel is configured. dr-xr-xr-x. 4 root root 4096 Feb 21 06:13 .. lrwxrwxrwx 1 root root 45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25 drwxr-xr-x 2 root root 4096 Feb 12 20........

  • yum Centos 386 and 64 bit conflict resolution


    This can happen when you install RPMForge or other repos with the wrong architecture and here's how you fix it (simply uninstalling won't usually fix it): solution yum clean all yum -y install openvpn Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile * base: mirror.its.sfu.ca * extras: centos.mirror.nexicom.net * rpmforge: mirror.cpsc.ucalgary.ca * up........

  • OpenVZ Quick Install Copy & Paste for Centos 6


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl After that just reboot and you may also have to enable ip_forward in /etc/sysctl.conf........

  • NVIDIA GeForce GT 610 not working in Linux solution - use older 304.117 driver


    Iused the slightly older "304.117" version and it worked. With the newest version Icouldn't get X to start and kept getting these errors in messages/dmesg. [ 2346.083660] nvidia 0000:01:00.0: irq 44 for MSI/MSI-X [ 2350.608342] NVRM: RmInitAdapter failed! (0x12:0x2b:1831) [ 2350.608354] NVRM: rm_init_adapter failed for device bearing minor number 0 [ 2350.608369] NVRM: nvidia_frontend_open: minor 0, module->open() failed, err........

  • CPanel Apache httpd won't start solution: Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf: Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration


    root@hkhosting [/]# service httpd start Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf: Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration ........

  • Dell CS24-NV7 Howto Enable LAN/NICs and PXEBoot in the BIOS


    Dell CS24-NV7 Unusually the Virtualization was enabled when I got this server but all the NICs were diabled in the BIOS including PXE boot! Advanced -> Advanced Chipset Control PCI Slot 1 Option ROM: Enabled Onboard LAN1 Control: Enabled LAN1 Option ROM Scan: Enabled (you need it for PXE boot) Onboard LAN2 Control: Enabled LAN2 Option ROM Scan: Enabled *you will need to reboot and........

  • Openvz OOM Centos Issue Memory Config Settings Solution


    Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux even setting privvmpages to a specific setting DOES not affect "free -m" in containers. This is probably a kernel issue 23:36:29 up 159 days, 7:12, 4 users, load average: 0.42, 0.44, 0.33 [root@box13 ~]# free -m total&n........

  • Dell SAS 6/ir Cards are just LSi 1068E cards


    02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) 03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) Basically these cards are a stripped-down version of Dell Perc 6/i only they (SAS 6/ir) support JBOD. The DellPerc 6/i are basically useless because it doesn't have JBOD support and requires software or BIOS commands to add or remove........

  • bash date command to convert unix epoch timestamp


    date -d @timestampgoeshere +%c It's very handy and simple as shown above.........

  • Linux free space not reclaimed after deleting large log file solution


    This example involves an Aterisk message log of about 26GB, but with any server it usually does not get deleted until the server is stopped/restarted: asterisk 13729 root 6w REG 0,41 27277943090 59097971 (deleted) /var/log/asterisk/messages So if you've deleted a bunch of large logs, make sure you restart the server for them to regain your space. ........

  • Linux howto resize image with Imagemagick


    convert check.png -resize 25%x25%! check-resize.png You can use a percentage or pixel sizes.........

  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........

  • Dell Perc 6/i SATA benchmarks without battery


    The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results. This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane. Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: N/A De........

  • Dell Perci 6/i Firmware Upgrade Guide Tutorial


    One thing to remember is that you need MegaCli to do the flashing. You also need the correct file,I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli(they were really the wrong version). I have an external PCI-E Dell 6 Perc/I butI chose images from the 'Integrated" on motherboard version as it was allI could find. They are different, and below is my first time finding success.........

  • Dell Perc 6/i cannot downgrade


    I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally. I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN --2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN Resolvi........

  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........

  • iptables centos error getsockopt failed strangely: Invalid argument


    iptables -t nat -A PREROUTING -p udp -m multiport --dports 20,123,443 -j REDIRECT --to-port 53 getsockopt failed strangely: Invalid argument........

  • charat in PHP convert non-English characters into code


    This is basically URL decoding to the decimal code but nothing in PHPworks how you'd expect it. Here are online tools to verify and check your work, it's important when querying databases with non-English characters: http://yehg.net/encoding/index.php# http://meyerweb.com/eric/tools/dencoder/ http://www.codetable.net/decimal/65398 Japanese: http://symbolcodes.tlt.psu.edu/bylanguage/japanesechartkatakana.html Charat code for PHP:........

  • package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture solution


    package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture Linux etc 2.6.18-274.7.1.el5xen #1 SMP Thu Oct 20 17:06:34 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux As you can see above architecture and kernel is 64-bit but I had to force it to install using "--ignorearch" Solution #rpm --ignorearch -ivh kernel-xen-2.6.18-274.7.1.el5.x86_64.rpm Preparing...&nb........

  • mkdir: cannot create directory 'test': Disk quota exceeded - Solution


    mkdir: cannot create directory 'test': Disk quota exceeded You are out of inodes usually: df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/simfs 200000 200000 0 100% / none ........

  • convert PDF to JPG howto in Linux


    Use imagemagick: convert -density 200 file.pdf file.jpg Increase the "density" value to get a higher resolution/larger file an decrease it to go smaller. This is really the quickest and simplest way. Some issues you may have: http://realtechtalk.com/ImageMagick_Convert_PDF_Not_Authorized-2217-article........

  • WD 20EARX Dead Again


    Another new drive bad from the start: Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC } Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........

  • Openvz "Container is currently mounted (umount first)" solution


    Container is currently mounted (umount first) The container is stuck in the "mounted" state, you must manually start it to get it out of that state (there is no umount option as implied by OpenVZ vzctl).........

  • OpenVZ Container Can't Restart, stuck in mounted state


    When trying to reboot this Centos 5 container, it gets stuck as "mounted" and requires a manual start command, here is what dmesg shows: [424458.173252] VE10000: no allowed mount options found for device 0:21 [424458.177970] proc: unrecognized mount option "relatime" or missing value [424460.297663] CT: 10000: stopped [426663.466433] CT: 10000: started........

  • WD 20EARX 2TB Bad within days


    This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad. ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0 ata1.00: irq_stat 0x40000008 ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/00:00:........

  • SSH Can't Login/Hang


    Client Log OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.1.253 [192.168.1.253] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_d........

  • vzquota : (warning) block_hard_limit [102] < block_current_usage [520824] - Openvz Solution


    vzquota : (warning) block_hard_limit [102] < block_current_usage [520824] This is because your disk usage of the container exceeds the quota. Eg. once on a test container I had accidentally set it to 32MB yet the OS took about 600MB. Just set the quota to something bigger than the currently used space to solve it. vzctl set 3891 --diskspace 5G:5G --save........

  • Samsung Galaxy Note I717M Canadian Version, Root and Unlock


    I chose this because I heard a lot of stories about scams and that many providers I contacted said they can't unlock the Canadian I717s (one said "my Bell server" is down). This method worked perfectly on my Bell I717M and should work for all I717 in Canada, I was able to insert a foreign SIMcard. This will work abroad too but remember entering CWM mode is different for I717's in other countries (at least theUS). Step 1 - Root + CWM........

  • Bad Hard Drive Slows Down Computer


    Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........

  • How to log all PHP based E-mails for abuse


    Step #1 - Create Wrapper Script vi /usr/local/bin/phpsendmail #!/usr/bin/php ........

  • Linux OpenOffice Convert .doc/documents to PDF format with unoconv


    Install unoconv unoconv -d document -f pdf file.doc Change "file.doc" to the name of your document. Note you could specify *.doc and it will convert all .doc's in the current directory to pdf which is very handy. unoconv uses the cli from OpenOffice to do this, OpenOffice actually doesn't have an easy way I've found of doing this despite it having the functionality. ........

  • OpenVZ - how to manually restore a VPS from another host or backup


    There are 3 pieces that are required to restore and make it work (of course consider if any kernel modules need to re-enabled and if you need to change the IPs): Copy the vz/private/VEID directory to /vz/private Copy the /etc/vz/conf/VEID.conf to /etc/vz/conf/ mkdir /vz/root/VEID After that you should be able to see the VE in vzlist -a You should then be able to start it normally.........

  • badblocks in Linux to check/verify if a hard drive/HDD is good or bad


    I like badblocks and don't know a better more reliable way of checking the drive. If there are no errors from badblocks and dmesg doesn't produce any SATA related errors, the drive should be good (for now at least). I also prefer to do read and write mode, yes it takes ages but it is really the best way of doing it. This gives me the most confidence in knowing that a drive, especially a new one is at least OK at the moment. To test in read only mode........

  • kvm cannot boot xen guest using lvm


    This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel. I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk. I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one). This is strange but it seems like this Xen PV guest has some sort of hidden or........

  • "Cannot load certificate file keys/server.crt: error:0906D06C:PEM" OpenVPN Solution


    Cannot load certificate file keys/server.crt: error:0906D06C:PEM The .crt is blank empty because when generating it I kept hitting enter for the defaults and this caused the crt not to be signed. Certificate is to be certified until Dec 18 00:35:49 2022 GMT (3650 days) Sign the certificate? [y/n]:y 1 out of 1 certificate requests certified, commit? [y/n]y So if you get messages like these, a........

  • How to convert raw,img,vdi,vmdk and other virtual image formats using qemu-img convert between VBOX/KVM/VMWare/Xen


    The example below converts youvm.img into a vdi. The -O vdi specifies the new format will be vdi but you can use any other valid formats/vice versa. qemu-img convert yourvm.img -O vdi yourvm.vdi This is very handy for those who need to switch between virtualization technologies.........

  • KVM/QEMU Base/Template Images and the power they provide


    qemu-img create -b centos.5-8.x86.20120308.qcow2 -f qcow2 ../kvmguests/25000-centos5.8x86.qcow2 Formatting '../kvmguests/25000-centos5.8x86.qcow2', fmt=qcow2, backing_file=centos.5-8.x86.20120308.qcow2, size=10485760 kB -b the source/base image -f format is qcow2 and the location of the destination image What is so special about this? It's even quicker than creating a template with OpenVZ but this is an actual OS. It saves time a........

  • Centos 5 and OpenVZ won't boot after kernel install


    For whatever reason the current OpenVZ yum repo file enables the RHEL6 version of OpenVZ, why is this bad? Because if you're running Centos 5 it still defaults to using the kernel from RHEL6 which won't work on RHEL5/Centos 5. Ionly realized this after wondering why I couldn't boot into OpenVZ that it was using one meant for RHEL6. To fix the problem you have to edit /etc/yum.repos.d/openvz.repo and disable the "[openvz-kernel-rhel6]" section by changing........

  • setquota: Mountpoint (or device) / not found. setquota: Not all specified mountpoints are using quota. with openvz solution


    Directadmin Error when changing user settings/saving Details Error with system Quotas setquota: Mountpoint (or device) / not found. setquota: Not all specified mountpoints are using quota. Debug Guide You have to disable and enable the quota's using vzquota on and off. After that it will work.........

  • Error: detected vswap CT config but kernel does not support vswap This means either old kernel or bad config (physpages NOT set to 0:unlimited) Solution for OpenVZ


    Error: detected vswap CT config but kernel does not support vswap This means either old kernel or bad config (physpages NOT set to 0:unlimited) Solution vzctl set $veid --physpages 0:unlimited --save........

  • iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) - OpenVZ Container Problem iptables module problem solution


    iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) This solution applies to all other iptables modules/problems for OpenVZ, you'll just need to add them to both lists/lines below if you have modules other than what I have below. The modules need to be enabled in both iptables and the OpenVZ hostnode itself and then the containers which need it must be restarted. How To Enable IPTables Modules in OpenVZ........

  • SSH error slow login debug1: An invalid name was supplied Cannot determine realm for numeric host address - Solution


    debug1: An invalid name was supplied Cannot determine realm for numeric host address debug1: Local version string SSH-2.0-OpenSSH_4.3p2 Debian-9etch3 debug1: An invalid name was supplied Cannot determine realm for numeric host address debug1: An invalid name was supplied A parameter was malformed Validation error Solution, disable auth from the ssh client (this is a client side error)........

  • The Importance of a High Quality Power Supply/Power Supplies To Prevent Overheating/System Crash/Hardware Damage


    For years I've always built cheap systems believing that there is little difference in more expensive components when it comes to reliability and quality, I generally believe this still except for Power Supplies. I've always bought cheap cases with nice sounding 350-550W stock/cheap/crap power supplies and haven't had any issues for the most part until recently. One such case is an NGEAR case with a 550W Optimax power supply, I always read that these supplies don't produce the........

  • Asus VE247H 23.7" Inch LCD/LED Backlit Monitor Dead/Stuck Pixel Policy Complaint


    I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen. I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........

  • Linux Ubuntu Nvidia GT430 Lockups/Errors/Freezes NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context


    I'm running Ubuntu 10.10 with Asus NVIDIA GT430 2.6.35-32-generic-pae #65-Ubuntu SMP Tue Jan 24 14:06:16 UTC 2012 i686 GNU/Linux Nvidia binary driver: 260.19.06 The screen sometimes completely freezes and locks up or everything starts going very slow: [1903398.100007] NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context [1903402.373210] NVRM: Xid (0001:00): 53, CMDre 00000000 00000080 00000000 00000005 00........

  • Xen non-HVM container won't work/boot anymore


    One of my test Centos 5 containers was on a partition that filled up and it threw all sorts of errors and stopped responding but now I can't boot it again anymore. All the console shows is the Linux Penguin on the top left corner and the xm console says "usbcore: registered new driver hub" and has halted there. Centos 5 Xen container stuck/frozen won't boot on "usbcore: registered new driver hub" Another great way of troubleshooting is booting fro........

  • File /etc/vz/conf/ve-vps.basic.conf-sample not found: No such file or directory - Openvz Error solution


    Stuff like this always happens/breaks after a vzctl update, whether it's new parameters being added or required etc.. File /etc/vz/conf/ve-vps.basic.conf-sample not found: No such file or directory Fix the value of CONFIGFILE in /etc/vz/vz.conf Creation of container private area failed Warning: distribution not specified in CT config, using defaults from /etc/vz/dists/default WARNING: /etc/vz/conf/4400.conf not found: No such file or directory........

  • Ubuntu 10 Nvidia Drivers Not Updated After Kernel Update Solution/How-To Manually Rebuild nvidia kernel modules for Ubuntu


    I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene. This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately). The most common reason may be that "linux-source" hasn't been installed automatically on my system. I tried to manually reinstall the........

  • OpenVPN don't use bridgestart.sh or bridge at all use iptables


    I used the suggested script to bridge from OpenVPN and it took my client's server off-line! Don't ever use their "sample" scripts if you don't have another way of accessing the server than SSH. I actually found it easier to use iptables to tell it to route IPs based on a certain subnet to route through eth0: iptables -t nat -A POSTROUTING -s 192.168.200.0/24 -o eth0 -j MASQUERADE Replace "192.168.200.0/24" with your subnet of cour........

  • gocr - free Linux OCR (Optical Character Recognition) conversion tool


    gocr works great and it's simple, just invoke it like so: gocr filename.png The output will be printed to the screen. My only complaint/concern is that even with standard terminal output (not scanned) from a printscreen, gocr does make mistakes by inserting extra spaces where they don't belong, mistaking letters for numbers etc.. but it's definitely enough to be readable and figure out what you're looking at. I haven't tested yet with scanned input........

  • Linux Kernel Panic Messages - Symptoms of bad RAM module/stick


    These were caused by a bad stick of Corsair RAM [] free_hot_cold_page+0xfc/0x150 [] __pagevec_free+0x14/0x1a [] release_pages+0x127/0x12f [] __pagevec_release+0x15/0x1d [] __invalid_mapping_pages+0x120/0x156 [........

  • convert carat ^M/M Windows based text files to Linux


    carat M isn't this symbol ^ that you think, it can only be produced by typing "Ctrl-v, Ctrl-m". That you might see in text files saved from Windows. tofrodos is the package that has dos2unix which is basically the same scripts that replace ^M with /n tofrodos is the Debian/Buntu package name which has the dos2unix and unix2dos binaries........

  • rpmforge: [#### ] 471/10722Segmentation fault yum[18934]: segfault at 0000000000000000 rip 00002ade62153a30 rsp 00007fff76f9fe58 error 4


    A few days ago this happened on multiple Centos 5 servers and apparently anyone using rpmforge was affected by this error and there was no solution other than disabling that repo to fix it. To some this highlighted a few points, that there is a reason RHELexists with full paid support, and also that this could be a vulnerability and huge flaw with yum. A yum search or install should not segfault just because the rpmforge repo goes down. Fortunately it came back up........

  • ifup eth0 SIOCSIFFLAGS: Cannot allocate memory Failed to bring up eth0 Centos Network won't work after kernel update and reboot


    ifup eth0 SIOCSIFFLAGS: Cannot allocate memory Failed to bring up eth0 This is on a Centos 5.5 machine with OpenVZ kernel 2.6.18-238.12.1.el5.028stab091.1PAE, I updated 3 systems with the same hardware to the same kernel and for some reason the network didn't come back. This only happened once the first time I booted into the new kernel and hasn't happened again but this is a serious issue for those running systems from remote locations such as a datacente........

  • Openvz Container IP not working suddenly Solution


    This may not apply to everyone but here is what happened to me. One day my IP connectivity for one container went dead, I could ping the hostnode from it and the hostnode could ping it but there was no external routing. I restarted the network service but it didn't help. I checked the routing table inside the VPS and the host and everything looked normal. Iadded another different IPon the same subnet to the container and it worked. Right away I st........

  • Openvz migration error solution Error: Failed to suspend container CPT ERR: f68cf000,25000 :foreign process 15755/14731(vzctl) inside CT (e.g. vzctl enter or vzctl exec). CPT ERR: f68cf000,25000 :suspend is impossible now.


    Starting online migration of CT 25000 to 192.168.5.1 Preparing remote node Initializing remote quota Syncing private Live migrating container... Error: Failed to suspend container CPT ERR: f68cf000,25000 :foreign process 15755/14731(vzctl) inside CT (e.g. vzctl enter or vzctl exec). CPT ERR: f68cf000,25000 :suspend is impossible now. CPT ERR: f68cf000,25000 :foreign process 15755/14731(vzctl) inside CT (e.g. vzctl enter or........

  • Linux Out of Memory OOM Object Killer Solution "Out of memory: kill process 1955 (sshd) score 81 or a child"


    I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM. I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives? Also no swap space was ever used! cat /proc/s........

  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........

  • smart is not smart, it thinks a dead drive is still good


    I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior: === START OF INFORMATION SECTION === Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZ20139 Firmware Version: 50.0AB50 User Capacity: 2,000,398,934,016 bytes Device........

  • Openvz CPT ERR: cc4c0800,28000 :Unknown image version: 304. Can't restore.


    CPT ERR: cc4c0800,28000 :Unknown image version: 304. Can't restore. This happens when you live migrate between OpenVZ servers with different kernels running, at least significantly different by date. There is no solution except to make sure you're running the same kernels on all machines, or at least not kernels that are much older or different (this is just a guess though, you should ensure all kernels are the same).........

  • Openvz YUM Error Solution to "[Errno -1] Metadata file does not match checksum Trying other mirror."


    It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work. I only get this error with the openvz.repo and not others such as Centos-Base.repo With my other server it works normally: ================ Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........

  • Hitachi 2TB HDS5C3020ALA632 drive DOA


    I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead): ata1: link is slow to respond, please be patient (ready=0) ata1: softreset failed (device not ready) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: link online but device misclassified, retrying ata1: link is slow to respond, please be patient (ready=0) ata1: softreset f........

  • Virtualbox Guest Hang/Freeze Ghost Zombie VM Machine Problem/Solution


    Virtualbox hang problem A VM just froze and wouldn't close so I had to force it, but the VBox GUI thinks it's running even when I close it. I manually killed the related process by doing ps aux|grep VirtualBox and found the PID 6191 I killed it with "kill -kill 6191" but it remains open and as "defunct" so I can't restart it because the GUI freezes when I click on it because it thinks it is running still........

  • encrypt bash scripts to hide source code


    http://www.datsi.fi.upm.es/~frosal/ SHC is a program written by the author above that does just that, it's a great little tool to have. Some have said it isn't exactly encrypting the code but just making it hard to read by obfuscating the code. There was also a good discussion about that here:........

  • Convert PDF to JPG/JPEG without low resolution/small picture size


    convert -density 400 somepdf.pdf -scale 2000x1000 output.jpg The key is the "-density 400" switch and also -scale 2000x1000 To give credit I found the solution here: http://www.imagemagick.org/discourse-server/viewtopic.php?f=1&t=10928 That was the perfect solution when I was frustrated with how small the resulting JPG's resulted. I'm sure this will help a lot of people when it comes time to converting a PDF to JPG which I'm amazed Imag........

  • Yahoo Mail (email) DNS Server Out Of Date Problems


    I don't expect this to be solved soon but some of Yahoo's DNS servers are out of whack. I changed the IPs of some nameservers of some domains and now most Yahoo users can't e-mail to those domains! As you can see below by the "No MX or A records for mychangedomain.com", now Yahoo's DNS/mailserver DNS cache is wrong. You would think they would at least have cached the old incorrect records, but instead for some reason their DNS cache has no entry and doesn't seem........

  • VOIP/Asterisk/FAX Error Problems Solution NOTICE[11389]: rtp.c:1808 ast_rtp_read: Unknown RTP codec 100 received from


    NOTICE[11389]: rtp.c:1808 ast_rtp_read: Unknown RTP codec 100 received from I've found that trying several times may work, but I also read changing your Sipura VOIP adapter settings as follows helps (but it still fails for me sometimes): In adapter change the following under SIP/Advanced Codec to G711a from G711u Passthru Method from: NSE to ReINVITE FAX CED Detect Enable: Yes FAX CNG Detect........

  • SPAMASSASSIN Disable OpenWhois RBL (it is dead/defunct/no longer active):


    SPAMASSASSIN Disable OpenWhois RBL (it is dead/defunct/no longer active): You might see this in your headers 2.4 DNS_FROM_OPENWHOIS RBL: Envelope sender listed in bl.open-whois.org comment out this inside /usr/share/spamassassin/72_active.cf ##{ DNS_FROM_OPENWHOIS ifplugin Mail::SpamAssassin::Plugin::DNSEval header DNS_FROM_OPENWHOIS eva........

  • Convert doc images/jpg/jpeg to PDF


    Use "ImageMagick" which can be installed easily on most UNIX/Linux distros. Remember that it will go with the standard file listing to determine the order but I believe you can manually specify multiple jpg's in the arguments. Convert image/jpg to PDF convert *.jpg yourpdf.pdf This is a very handy and free tool. Convert DOC/TXT documents to PDF If you wanted to convert a .doc file or text........

  • Openvz Enable TUN/TAP OpenVPN


    Make sure the module "tun" is loaded on the host. vzctl set 2000 --devnodes net/tun:rw --save *Note what's below is what OpenVZ says you need (but I've never had to do it) vzctl exec 2000 mkdir -p /dev/net vzctl exec 2000 mknod /dev/net/tun c 10 200 vzctl exec 2000 chmod 600 /dev/net/tun On the container test the device: when Something is wrong:........

  • OpenOffice Calc SUM function not working Solution - Result is always 0/apostrophe appears in front of all numbers.


    I right clicked all applicable cells and chose "number" but that's enough. I notice when I click the cell there is an invisible ' in front of the number: '33.64 Calc imported my CSV and decided to add a ' in front of the numeric currency values!!!*Actually the problem occurs when you right click the cells and change the type from text to number, no matter what format you choose. If I change it to be currency i........

  • Thunderbird copy filters to other accounts


    cp msgFilterRules.dat /other/mail/folder edit msgFilterRules.dat change all instances of your old mailbox: actionValue="mailbox://joes@mail.server.com/name" to: actionValue="imap://joes%40server.com@mail.server.com/INBOX" sed s/'actionValue="mailbox:joes@mail.server.com'/imap://joes%40server.com@mail.server.com/g msgFilterRules.dat-........

  • Thunderbird/MBOX to IMAP/Maildir migration done easy with mb2md


    Convert MBOX Mail files into Maildir using Linux *You need perl an the TimeDate module Get the free Perl script mb2md from the project/author's site: wget http://batleth.sapienti-sat.org/projects/mb2md/mb2md-3.20.pl.gz gunzip mb2md-3.20.pl.gz #remember you need timedate or you'll get this error: ./mb2md-3.20.pl Can't locate........

  • Openvz Disk quota exceeded inode problem with free space


    Openvz problem, it is confusing because it's an inode issue and there is enough free space. cp: cannot create regular file `forums/memberlist.php': Disk quota exceeded /dev/simfs 60G 20G 41G 33% / none 2.0G 4.0K 2.0G 1% /dev........

  • updatedb/mdadm caused a kernel panic?


    Jan 16 04:02:03 centosbox syslogd 1.4.1: restart. Jan 16 04:07:34 centosbox kernel: INFO: task updatedb:20771 blocked for more than 300 seconds. Jan 16 04:07:34 centosbox kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jan 16 04:07:34 centosbox kernel: updatedb D F78BE050 6476 20771 20766&n........

  • Ubuntu 9.04 Crash


    CPU/Kernel/MB/RAID problem? Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168] Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........

  • SSH delay problem UseDNS and disabling GSSAPI does not help


    The normal solution doesn't help or apply here: ssh -v user@192.168.5.41 OpenSSH_4.3p2 Debian-9etch3, OpenSSL 0.9.8c 05 Sep 2006 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.5.41 [192.168.5.41] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: i........

  • VMWare Server cannot connect to web interface SSL Handshake on client connection failed: SSL Exception


    VMWare log: /var/log/vmware/hostd.log SSL Handshake on client connection failed: SSL Exception sudo /etc/init.d/vmware-mgmt restart Stopping VMware management services: VMware Virtual Infrastructure Web Access VMware Server Host Agent&nb........

  • VirtualBox Convert Import/Boot .vmdk VMWare Hard Disk/Drive Image Won't Work


    I wanted to Import/Use a .vmdk hard disk image file from VMWare. Generally you can just "point" VirtualBox to it and use it and it will work but I found an exception. One of my Centos 4.4 x64 images wouldn't boot. I had two copies, an older one and the newer one. The older one booted as normal (once I changed the VirtualBox driver to IDE from SATA). The newer one stopped at the "GRUB loading" message no matter what I tried. As far as........

  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........

  • vzquota : (warning) Incorrect quota shutdown for id 2333, recalculating disk usage vzquota : (error) quota check : lstat `sess_a5078fce5f569e453ab1fb39b0fc69f8': No such file or directory vzquota on failed [1]


    first container would not come up: Starting CT 2333: service vz stop OpenVZ is locked [FAILED] 2010-11-29T23:26:23-0800 vzctl : CT 2333 : Starting container ... 2010-11-29T23:37:21-08........

  • WD (Western Digital) Advanced Format Drive Lagged/Slow Speed/Performance/Design Flaw EAD/EARS problem WDC WD20EARS-00S8B1


    Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive. This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series. To make it worse this is also when Western Digital introduced "Advanced Format" o........

  • How to chroot properly into your OS/distro


    From a LiveCD or if you're doing something like converting your non-RAID install to mdadm here's how you would chroot properly (you have to mount your proc, sys and dev on the running system/LiveCD to your chroot environment if you want things to work right, especially if you need to run update-initramfs due to a driver change etc..) *replace "path" with your mount/chroot path mount -o bind /proc /mnt/path/proc mount -o bind /dev/ mnt/pa........

  • Nautilus/GNOME File Manager handy list of extensions


    nautilus-gksu - privilege granting extension for nautilus using gksu nautilus-sendto - integrates Evolution and Pidgin into the Nautilus file manager nautilus-share - Nautilus extension to share folder using Samba nautilus-actions - nautilus extension to configure programs to launch nautilus-bzr - Bazaar (bzr) integration for nautilus nautilus-cd-burner - CD Burning front-end for Nautilus nautilus-clamscan - Antivirus scanning for Nautilus n........

  • GNOME/Nautilus Resize Images/Pictures from File Manager by right clicking


    Just install the following package "nautilus-image-converter" and you will be able to right click any image and convert the size and rotate it. My only wish is that you could also convert the image type from say tiff to jpg etc... This is an awesome/handy/feature and great tool to have. This is one way where GNOME/Nautilus excel, the possibilities are endless to simplify and make simple/mundane tasks quicker and more efficient than ever.........

  • Initializing quota ... Error: Not enough parameters, diskinodes quota not set


    Initializing quota ... Error: Not enough parameters, diskinodes quota not set vzctl set $veid --diskinodes 90000:91000 --save New versions of OpenVZ seem to have some strange diskinodes parameter which is required.........

  • Openvz Error Starting OpenVZ: failed to load module vzmon [FAILED]


    service vz start Starting OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzmon: Unknown symbol fini_ve_route6........

  • OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzm


    service vz start Starting OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzmon: Unknown symbol fini_ve_route6 ........

  • Openvz Quick Install for CentOS 5 Tutorial


    cd /etc/yum.repos.d wget http://download.openvz.org/openvz.repo rpm --import http://download.openvz.org/RPM-GPG-Key-OpenVZ yum install ovz-kernel-PAE Now remember to set /etc/sysctl.conf to "net.ipv4.ip_forward = 1" You can apply the change immediately by running sysctl -w net.ipv4.ip_forward = 1 but remember that you still have to set sysctl.conf sysctl -p will load and apply any changes to s........

  • DRBD WFConnection Problem/Solution


    This has stumped me a few times because I keep forgetting that Centos 5.5 comes with a default iptables configuration that ends up blocking DRBD traffic,I tried all the normal things and couldn't understand why I couldn't make my normal DRBD config work. So if you have WFConnection problems and have tried the normal "mailing list" fixes, check your firewall status first! Both Nodes Say the Following: version: 8.3.8 (api:88/prot........

  • Openvz Live Migration Error - Error: undump failed: Invalid argument Restoring failed: Error: iptables-restore exited with 2 Error: Most probably some iptables modules are not loaded Error: rst_restore_net: -22


    Adding IP address(es): 192.168.5.8 192.168.5.9 Setting CPU units: 1000 Error: undump failed: Invalid argument Restoring failed: Error: iptables-restore exited with 2 Error: Most probably some iptables modules are not loaded Error: rst_restore_net: -22 Container start failed Stopping container ... Container was stopped Container is unmounted Error: Failed to undump VE Resuming... vzquota : (erro........

  • Ubuntu 10.04 Linux is still not ready for the Desktop world


    I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD. Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer). I'll........

  • OpenVZ/vzctl how to do an on-line migration without downtime


    vzmigrate --online dest-host VEIDNO eg.: vzmigrate --oneline 192.168.1.55 101 One option I would recommend is "--keep-dst", that way if the migration is interrupted you can still bring the VPS back up on the original host. After the migration is successful you can manually destroy it. OpenVZ has a good writeup on this including Checkpointing and Restoring etc:........

  • OpenVZ iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Solution


    This error is annoying, in a Virtuozzo KB entry about this ip tables nat problem they say the kernel needs to be ugpraded: Symptoms The node runs 2.6.18-x kernel older than 2.6.18-028stab053.10. NAT module does not work in container, you get "can't initialize iptables table 'nat'" error: # iptables -t nat........

  • jailkit for chroot ssh account security tutorial and fix for error


    This was done on Centos butI think it's easier on Debian machines, the paths that it is set to use are tailored towards Debian, so there is some fiddling that needs to be done on Centos. This is for chrooting ssh, but jailkit has other uses than just SSH jails but I won't cover them in this writeup. 1. Install jailkit yum install jailkit 2. Setup Jail Home mkdir /home/jail chown root:root /home/ja........

  • After installation Directadmin does not work directadmin dead but pid file exists on OpenVZ VPS when browsing http://ip.ip.ip.ip:2222


    After installation Directadmin does not work on OpenVZ VPS when browsing http://ip.ip.ip.ip:2222 service directadmin status directadmin dead but pid file exists tail /var/log/directadmin/error.log Check the value of your ethernet_dev=eth0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifconfig 2010:07:10-12:44:01: ioctl can't find........

  • Linux looking for a way to convert XLS/Excel Spreadsheets into Plain Text?


    catdoc.i386 : Decodes MS Word files into plain text or TeX format I haven't figured out how to use it, it is really not clear or obvious but it should do the job if you can figure it out. Usage: catdoc [-vu8btawxlV] [-m number] [-s charset] [-d charset] [ -f format] files........

  • Linux Burn MP3 CD On the Fly using


    I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project. Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is. I just want to a directory that had the MP3's I wanted t........

  • Openvz Enable Most Common iptables modules


    The default options for iptables are very basic. Here is what you need to do in order to enable them in OpenVZ. 1.) Add the modules to iptables and restart iptables: vi /etc/sysconfig/iptables-config Edit the line as so: IPTABLES_MODULES="ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp" 2.........

  • Centos 5.5 RAID 1 boot issue


    I installed 5.5 with a 300GB RAID 1 partition (boot is also on this partition). It booted up fine the first few times until after I used a Live CD and accessed the array, and it became named /dev/md127 for some reason. Now whenI boot into CentOS I get a kernel panic and different errors, once I got "invalid superblock", even though the array is fine (it didn't happen again, probably because I was sure to dismount and stop the mdadm array properly). Here's what........

  • Unixbench Score on Core i5 750 with OpenVZ Kernel vs Xen/Openvz


    This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel. OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!) # # # # # #&n........

  • OpenVZ user_beancounters kmemsize failcnt Processes Timing Out/Doing Nothing/Zombie


    cat /proc/user_beancounters produces the following: kmemsize 1861537 5139870 12752512 12752512 26965041 Notice the failcnt "26965041", that is for kmemsize and at first it confused me. The system had enough guaranteed and enough burst RAM available. kmemsize is a variable indepedent of that, but who cars about the explanation right, let's just make thing........

  • CPanel OpenVZ VPS Error - *** Notice *** No working loopback device files found. Try running `modprobe loop` as root via ssh and running this script again.


    Ihave no idea how to get the loopback device working in OpenVZ, but what's more frustrating is that I purchased a CPanel license for my VPS and clearly it is not "VPS Optimized". Although everything does seem to work at this point despite that error. The suggestions here: http://forum.openvz.org/index.php?t=msg&goto=1339 don't seem to work at all. This is an OpenVZ issue, but also a CPanel isue, why on earth would loopback support be expected in a VPS a........

  • rsync halted froze Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync)


    Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync) I was surprised to see this in my dmesg whenmy rsync backup suddenly stalled/stopped. This system has 3 gigs of RAM and lots of free memory so I don't understand what is happening. rsync invoked oom-killer: gfp_mask=0x200d2, order=0, oomkilladj=0 Pid: 7600, comm: rsync Not tainted 2.6.24.2 #83 [] oom_kill_pr........

  • Seagate Drive 500GB Drive Dying


    This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART. Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device........

  • Seagate 7200.11 firmware defect in 500GB, 1000GB (1TB) and 1500GB (1.5TB) Hard Drives


    Seagate Inventory/Firmware Check I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate. *Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate! Seagate Inventory/Firm........

  • Convert HDD/Hard Drive Partition(s) into non-RAID into RAID 1 using existing data without data loss and without reformatting.


    Before we start I take no responsibility for this, you should have a backup and if you make a mistake during this process you could wipe out all of your data. So backup somewhere else before starting this as a precaution, or make sure it's data you could afford to lose. The RAID 1 Setup (Hardware Wise) I've already setup my 2 x 1TB (Seagate) drives with identical partitions, make sure your new hard drive (the empty one) is setup like your curr........

  • PDF File Conversion/Solution Using Imagemagick to create PDF files for free, quickly and efficiently


    I'm really starting to love ImageMagick, I've used it to mass convert/resize family photos with scripts and all kinds of handy things. Today I just learned that you can create PDF files with it too, say if you have images scanned or anything else it's very simple: convert *.jpeg output.pdf You can replace jpg with whatever format your files are in. One thing to remember is that you can specify the order that the images/pages are added to the PDF manu........

  • email2fax and Asterisk to do eFaxing


    It's basically free bash shell script available from: http://wpkg.org/email2fax/index.php/Main_Page Make sure you have the required tools: libtiff ghostscript mpack/munpack Where you can e-mail your Asterisk box and it will fax it to the phone number in the subject line. The good news ends there, it is fairly undocumented and buggy. Take for example how the documentation mentions you can invoke from the com........

  • Picking an FTPD (vsftpd) Server in Linux Centos/Debian


    I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find. yum search ftp Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: ftp-stud.fht-esslingen.de * base: mirrors.netdna.com * updates: updates.interworx.info * addons: yum.singlehop.com * extras: mirrors.netdna.com rpmforge........

  • OpenVZ backup container to a single file while it's running using "vzdump"


    Proxmox has made this free utility to backup running OpenVZ containers. It's a great program which is actually just a PERL script but gets the job done. This program is not 100% required because all it really does is cp -a from your container's path as far as I know but it is still good to have uniformity to how you backup your containers. For RPM distros such as Centos/RHEL/Fedora etc.. download and install this: wget http://www.proxmox.com/cms_proxm........

  • ntfs-3g Error/Fix/Solution - Unexpected sectors per cluster value (127). Failed to mount '/dev/sda1': Invalid argument The device '/dev/sda1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a


    ./ntfs-3g /dev/sda1 /mnt -o force Unexpected sectors per cluster value (127). Failed to mount '/dev/sda1': Invalid argument The device '/dev/sda1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? This is happening on a system I've come across an HP 6930P running Windows XP Professional. The partition appears to be very norm........

  • heartbeat is stopped for some reason


    heartbeat is stopped for some reason Anyway hnode2 was active and the services are running fine but I see heartbeat has been stopped somehow. Here is the last log I see of heartbeat: [quote:23c84415f5] Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: MSG stats: 9/1762471 ms age 0 [pid16738/MST_CONTROL] Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: cl_malloc stats: 716/51784021 152624/74519 [pid16738/MST_CONTROL] Sep 9 17:15:32........

  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........

  • JavaScript how to do math arithmetic with floats and int


    JavaScript how to do math arithmetic with floats and intI have 3 variables some of which are just int and some float and need to find their sum It just adds them as strings for some reason.Normally this would work but the floats were actually text technically I guess since they came from a form. You need to convert them using parseFloat() and then everything is fine.........

  • Convert PS2 controller to PC USB Controller


    Convert PS2 controller to PC USB ControllerSuper Joy Box 3 Pro http://www.play-asia.com/paOS-13-71-6m-49-en-70-qc2.html........

  • Mount Linux ext2 file system


    Mount Linux ext2 file systemNormally in Linux you could mount ext2 or ext3 etc... like this: mount -t ext2 /dev/hda1 /mnt/hda1/ In FreeBSD the difference is of course the disk naming conventions (hda1 would be known a /dev/ad0s1): To mount ext2 in FreeBSD just type: mount -t ext2[b:68c16c60bf]fs[/b:68c16c60bf] /dev/ad0s1 /mnt/ad0s1........

  • Nice General Linux RAID 1 Guide


    Nice General Linux RAID 1 GuideFull examples/tutorials that should work for any Linux system using GRUB or LILO as the boot loader. This is the only tutorial I've seen that clearly shows how you can convert an existing non-RAID system to software RAID1 remotely, without ever having to be at the computer. This is important for people who co-locate or rent dedicated servers that they may not have physical access to in a timely manner. https://alioth.debia........

  • Telus + 2Wire 2700 Router Horrible


    Telus + 2Wire 2700 Router HorribleWell first of all let me say this is the only router/switch that sometimes seems to crash/disconnect computers on the local network. This device also thought it would be smart to block VOIP packets coming from my Sipura ATA VOIP adapters so I disabled the [quote:cb89ba7bff]"Invalid TCP Flag Attacks (NULL/XMAS/Other)"[/quote:cb89ba7bff] option Then all of a sudden I couldn't get onto any web pages, the wireless........

  • The New Chips on the Block


    The New Chips on the BlockThe New Chips on the Block By Bruce Gain Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html 02:00 AM Jun. 13, 2005 PT We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........

  • gnuCash - Alternative to Quickbooks/Quicken and other COTS accounting software.


    gnuCash is available for all main platforms, Linux/Unix, MacOS (FreeBSD anyway), and Windows. You can download gnuCash free from here. It does seem to be fairly full featured and somewhat straight forward, but like so many programs it is missing a few key features or things don't work quite right. It doesn't support importation of CSV files, which is a big minus. And the developers rather than wanting to add support have just dec........

  • Openvz "Container already locked" Error Message Solution/Fix


    I didn't find any useful information that actually fixed this. My VPS was in the "Running State" and I could not stop or restart it. I kept getting "Container already locked" no matter what Idid (I tried all the suggestions in the Google results for this error). Most of the suggestions were for Windows but I only use Linux. The other solutioins also said to restart the VZ service or even the entire hostnode and this was not acceptable to me........

  • Adventures in pre-paid SIM Cards and data GPRS/Edge/3G in China with China Mobile in Shenzhen, Guangzhou, Shanghai, Beijing and other cities


    This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far: You can purchase an "M-Zone" China Mobile pre-paid SIMCard from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all. At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........

  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon - Updated with GlusterFS 2.0.8 & Optimized Client Config


    The results are still not flattering and are nothing close to native performance. Unless GlusterFS has a "DRBD-like" option to delay writes over the network and to only read from the client side, I don't see how performance can ever improve much more. After doing some client optimizations Iadded more to the score: Start Benchmark Run: Sun Nov 29 00:37:44 PST 2009 00:37:44 up 3 min, 1 user, load average: 0.01........

  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon - Updated with GlusterFS 2.0.8


    You might remember my original GluserFS/OpenVZ benchmark which produced a horrible 29.8 This is the exact same system, but using the latest 2.0.8 (with some small files patch which speeds up performance) you can see it is about 25% faster. I also haven't tuned my config files at all, but there are some settings that should increase performance on small files which I believe i........

  • yum error not working rpmdb: mmap: No such device TypeError: rpmdb open failed


    Loaded plugins: fastestmirror rpmdb: mmap: No such device error: db4 error(19) from dbenv->open: No such device error: cannot open Packages index using db3 - No such device (19) error: cannot open Packages database in /var/lib/rpm Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py&qu........

  • Tyan S2735-8M Maximum Hard Drive Limit/Not Working/Doesn't work with 1TB 1000GB hard drives


    Inever saved any of the logs, but basically no matter what OS (Linux)I used, I could not get my 1000GB hard drive to work (Seagate SATA). The BIOS recognizes the drive and fdisk -l shows the hard drive as it should. The tricky thing is that different OS's will give you different results, but don't be fooled. You can't use these larger drives for long. Iwas getting all kinds of seek/IOerrors and also messages that the port could not be read.........

  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon


    This is very disappointing since GlusterFS markets itself as a solution to deploy VPS servers on. On the HNitself I get a Unixbench of about 360. I'm also using an SSH tunnel to secure the communications, but even before that, things seemed very slow. # # # # # # # #####&n........

  • Linux Bash Shell Cannot/Can't View File That Starts With - Dash ?


    Iwas getting really annoyed with this, I used full quotes around the filename and vi, cat, less all thought I was trying to pass the dash in the filename as an argument. I didn't realize that all you have to do is just put a dash dash "--"in front. Here's an example:cat -- "-etc-glusterfs-glusterfsd.vol.log" Without the -- you get: cat: invalid option -- c Try `cat --help' for more information. Ih........

  • sudo: Error dropping capabilities, aborting in Linux Centos 5.3


    For some reason Ikeep getting this error when trying to run a sudo command eg: sudo -u someuser somecommand sudo: Error dropping capabilities, aborting My version of sudo is:sudo-1.6.9p17-3.el5_3.1 and I've heard that version 1.7 fixes everything. The only thing is yum does not think sudo has any update. Iguess the new version has not been committed to the RPM repository yet. This is really a huge and ann........

  • Have an OpenVZ VPS/Linux Virtual Private Server and nothing works right?


    A VPS Server I had just wasn't working right, code that I migrated there just wasn't working. For example, it kept telling me the connection to the database was unsuccessful, halfway through iterating through results it already had. Then I realized it wasn't my code. Ichecked my /proc/user_beancounters and found this: cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt........

  • OpenVZ/Virtuozzo Enable Fuse in Container


    To enable Fuse to work inside a OpenVZ container it's very simple (although some people say it can't be done). Remember that on your HN(HostNode) for OpenVZ, Fuse must be installed and the module must be loaded for this to work. In addition remember that you need the Fuse package installed inside the container of course. vzctl set 2000 --devices c:10:229:rw --save vzctl exec 2000 mknod /dev/fuse c 10 229 The part that most people forget........

  • Bash Script/Linux/Unix HTML/XML Parser


    There is a tool called "xml2" which will parse both HTML and XML scripts, this is very useful to do a mass extraction or conversion of data based on say an HTML table etc.. It becomes even more powerful using bash if certain tags are identified with a certain class="" attribute or something else unique to only the tags you want. Happy parsing.........

  • iPhone 3GS 32GB "Harsh Review"


    Yes, Iadmit I finally got bitten by the hype as much as I can usually see through it all. Keep in mind this review is of the "stock" phone, no jailbreaking yet which is what really unleashes the customizability and whyI bought iPhone. I had better things to say about this phone before buying it, and it is a great phone, perhaps the best on the market by far, if not because of the Mac OS port onto the iPhone and all the apps, etc, etc. With that said........

  • Using a Mac OSX DMG Image in Windows and Converting to Standard ISO Format use dmg2iso


    The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso I'll only cover theLinux version although the Windows pre-built binary works the same way. Download dmg2iso here for free (from the author's website) It's just silly and doesn't make sense that Ubuntu doe........

  • Apple iPhone 3GS and predecessors are leading a revolution


    As much of a computer nerd as Iam, I'm usually a late adopter to technology for a few reasons. Ifeel most new hyped technologies and electronics are mainly fads, and I'm also cheap. Adopting later means you avoid the bugs, kinks and most importantly pay the lowest price, that's me being cheap again :) I never read much about the iPhone but Isaw all the hype around it and until recently I wasn't a big fan of anything Apple until a few years ago I realize........

  • SSH Server Slow/Lagged/Delayed Login Response


    This is really something the SSHServer developers should consider. The cause of this annoyance is because of failed DNS lookups on your IPaddress, which is especially common for many dedicated/col-located servers and also computers on internal NAT/private networks. The chances are this is the cause of your SSHSlow/Delayed Login problems. The easy solution to SSH Login Problems Edit /etc/ssh/sshd_config Add this line to disable r........

  • OCFS2 crash


    When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it. More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things. Output of /var/log/messages for OCFS2 Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........

  • ENOM Major Outage


    At this time we can't resolve Enom's website and all DNS requests to their 4 primary name servers are failing, although the hostnames themselves still resolve: Name Server: DNS1.NAME-SERVICES.COM Name Server: DNS2.NAME-SERVICES.COM Name Server: DNS3.NAME-SERVICES.COM Name Server: DNS4.NAME-SERVICES.COM Name Server: DNS5.NAME-SERVICES.COM You would really think Enom, bein........

    • Latest Articles

  • How high can a Xeon CPU get?
  • bash fix PATH environment variable "command not found" solution
  • Ubuntu Linux Mint Debian Redhat Youtube Cannot Play HD or 4K videos, dropped frames or high CPU usage with Nvidia or AMD Driver
  • hostapd example configuration for high speed AC on 5GHz using WPA2
  • hostapd how to enable and use WPS to connect wireless devices like printers
  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730
  • Cloned VM/Server/Computer in Linux won't boot and goes to initramfs busybox Solution
  • How To Add Windows 7 8 10 11 to GRUB Boot List Dual Booting
  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile
  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial
  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif
  • Linux Debian Mint Ubuntu Bridge br0 gets random IP
  • redis requirements
  • How to kill a docker swarm
  • docker swarm silly issues
  • isc-dhcp-server dhcpd how to get longer lease
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian
  • zfs and LUKS how to recover in Linux
  • [error] (28)No space left on device: Cannot create SSLMutex Apache Solution Linux CentOS Ubuntu Debian Mint
    • Copyright © realtechtalk.com 2024