• hostapd how to enable and use WPS to connect wireless devices like printers


    Edit your /etc/hostapd/hostapd.conf file like below and restart hostapd. #WPS stuff # Enable control interface for PBC/PIN entry ctrl_interface=/var/run/hostapd eap_server=1 wps_state=2 ap_setup_locked=1 wps_pin_requests=/var/run/hostapd.pin-req config_methods=label display push_button keypad #WPS model info stuff change to suit your needs device_name=USB2.0 WLAN manufacturer=ATHEROS model_name=WAP........

  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.


    This sometimes happens when trying to install the EFIversion of grub to a device when you are booted into Legacy/MBR mode. It doesn't seem to occur on all machines, but some and seems somewhat BIOS dependent. grub-install --target=x86_64-efi /dev/sda Installing for x86_64-efi platform. grub-install.real: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image.. grub-install.real: warning: Couldn't find physica........

  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian


    This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525. Then nvidia-modeset goes to 100% There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines. https://forums.de........

  • zfs and LUKS how to recover in Linux


    Sometimes users take their removal drives and unplug and replug them to test what happens during the failure of a disk. However, this breaks things quite badly due to the /dev/mapper in LUKS not coming back online due to it not being closed. In other words, generally with non-encrypted drives the process is smooth but when encrypted you may want to follow a strategy like this: We can see below that both disks are unavailable as they were physically remov........

  • How to access a disk with bad superblock Linux Ubuntu Debian Redhat CentOS ext3 ext4


    Have you ever tried mounting a partition that you exists but you get this error? mount: /mnt: can't read superblock on /dev/sda1. The superblock in this example was bad because the physical disk had corruption and bad blocks/sectors. However, the data was generally accessible and you can always try this trick below (with caution and no warranty). This is specifically for filesystems that place superblocks in multiple locations, which........

  • PTY allocation request failed on channel 0 solution


    PTY allocation request failed on channel 0 You may have messed up your environment and specifically under /dev you may have remounted a wrong source point or otherwise killed /dev/pts The solution is to recreate /dev/pts or fix whatever caused it to be wiped out or broken. In verbose mode the client may show this: #verbose client Authenticated to 172.16.17.2 ([172.16.17.2]:22). debug........

  • Docker Swarm vs Kubernetes Comparison Guide


    A lot of companies are unsure which solution to choose and many may not be aware of Docker Swarm as an alternative to Kubernetes. One thing that many Sysadmins find is that Docker Swarm is simply easier, quicker to setup and maintain by far than Kubernetes.........

  • When is it time to leave your VPS/VDS Cloud Hosting Provider?


    When Is It Time to Leave Your VPS, VDS, and Dedicated Server Provider? Choosing the right hosting solution—be it Virtu........

  • Postfix / sendmail config for DKIM, SPF and DMARC Tutorial Guide E-mail Delivery for Hotmail.com Gmail.com and More HowTo


    This will be the goto to help solve e-mail delivery issues and talk about many practical issues that happen between developers, admins and scripts that send e-mail and do things that may not be acceptable or cause deliverability problems. Sendmail Stuff Edit /etc/mail/sendmail.mc The problem is that if you send directly out from the server using the mail function, the Return-path of the e-mails will be username@thehostnameoftheserver.com. Let........

  • glib-2.0 required to compile QEMU solution


    ./configure glib-2.0 required to compile QEMU yum install glib2 glib2-devel or on Debian/Ubuntu based: apt install libglib2 libglib2-dev........

  • How To Upgrade Debian 8,9,10 to Debian 12 Bookworm


    Step 1.) Upgrade to Debian 11 first The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful. Step 2.) Update sources.list Update your /etc/apt/sources.list like this: deb http://........

  • apache2 httpd apache server will not start [pid 22449:tid 139972160445760] AH00052: child pid 23248 exit signal Aborted (6) solution Mint Debian Ubuntu Redhat


    If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing. The above results in this less than obv........

  • How to use the FTDI USB serial cable to RJ45 adapter to connect to the console on Cisco/Juniper Switch Router Firewall in Linux Ubuntu Debian Redhat


    This should work for most console ports of other manufacturers too. It is a quick and simple method for emegencies or deploying a few appliances/devices in a non-standard environment or small environment. However, if this is a route thing, or the equipment is not physically close to you, it would be best to use some sort of "Terminal" server which is an IP connected switch with several serial ports built-in for this purpose. Normally they accessible by web/........

  • How To Setup Python3 in Ubuntu Docker Image for AI Deep Learning


    The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself. I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all. docker run -it --runtime=nvidia --gpus all ubuntu bash These works for most images li........

  • How to Configure NVIDIA GPUs with Docker on Ubuntu: A Comprehensive Guide for AI Deep Learning CUDA Solution


    Welcome to our in-depth guide on configuring NVIDIA GPUs with Docker on Ubuntu. This post is tailored for developers, data scientists, and IT professionals who are looking to leverage the power of NVIDIA's GPU acceleration within Docker containers. Whether you're working on machine lea........

  • Linux How To Access Original Contents of Directory Mounted Debian Mint CentOS Redhat Solution


    Let's say you have a directory /mnt/raid which has files and directories inside it, but nothing is mounted to it. Then you mount a block device such as /dev/sdh to /mnt/raid Even though /mnt/raid has files and directories there, you can only see the mounted contents of /mnt/raid. How do we access the original contents? Just do a bind mount of the root filesystem to another location. mkdir /bindmount mount --bind / /b........

  • request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted solution


    request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted This is usually caused by a mismatch in architecture and happens frequently in development environments. Here is a example of what caused this issue: Your binaries are based on one architecture Your kernel was compiled with another architecture. Why does this happe........

  • How to upgrade to the latest Python version on Linux Ubuntu Debian Mint 3.11


    A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version. Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended): Step 1 - Add the repo apt-add-repository ppa:deadsnakes/ppa If you get an error about requests then install it:........

  • kernel panic initramfs not syncing cause solution


    Check your initramfs if it's missing /dev/null or /dev/console, this is likely the reason. If you want all actual devices to be created you could also enable devtmpfs in your kernel (.config) and mount like this during init: CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y mount -t devtmpfs none /dev But note devtmpfs will not create /dev/null or /dev/console for........

  • Could not read response to hello message from hook [ ! -f /usr/bin/snap ] || /usr/bin/snap advise-snap --from-apt 2>/dev/null || true: Connection reset by peer


    You may have a broken apt configure that calls for snap (which is not installed if you get the error below): apt install coreutils Reading state information... Done E: Could not read response to hello message from hook [ ! -f /usr/bin/snap ] || /usr/bin/snap advise-snap --from-apt 2>/dev/null || true: Connection reset by peer E: Could not read message separator line after handshake from [ ! -f /usr/bin/snap ] || /usr/bin/snap advi........

  • How to install and configure haproxy on Linux Ubuntu Debian


    haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx. haproxy is used by many large sites per Wikipedia: HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........

  • How to install Windows or other OS and then bring to another computer by using a physical drive and Virtual Machine with QEMU


    This has been a tried and true method for Windows because it is finicky with hardware changes without a reinstall (eg BSOD on boot is what happens 9/10 times unless you move to the same hardwar). Surprisingly, if you use a QEMU VM and do a standard install, it has worked in every system I've thrown the drive in afterwards. So the play is this, use a USB SSD, physical SATA drive plugged internally or for convenience, you could use a SATA to USB adapter on another computer to perf........

  • RHEL 8 CentOS 8, Alma Linux 8, Rocky Linux 8 System Not Booting with RAID or on other servers/computers Solution for dracut and initramfs missing kernel modules


    This seems to have changed for RHEL 8 where a normal dracut to update your initramfs creates a system that only boots for the running kernel. For example if you have Kernel 5 and then chroot into a RHEL 8 variant which uses kernel 4.18, and run dracut, it seems that by default the system will be unbootable. It is also the case that if you move your RAID array or drives to another server that it will be unbootable, because dracut seems to only include modules needed for the curre........

  • Virtualbox Best Networking Mode In Lab/Work Environment without using NAT Network or Bridged


    Virtualbox is a very powerful tool, but for some use cases it is less than optimal. Say you are in a work, lab or other environment where you are not alone on the physical network and there could be overlap of IPs, but you need all of your VMs to be contactable from your host, VMs need to communicate with each other, and VMs need internet. NAT Network will give you VM to VM communication and internet, however, it is buggy and unstable. It also doesn't allow host to VM co........

  • debootstrap how to install Ubuntu, Mint, Debian install


    In this example we install debian 10 with --variant=minbase which gives us a minimal/tiny install. Don't use variant if you want the full size install. mkdir /tmp/deb10files debootstrap --variant=minbase buster /tmp/deb10files/ Did you get an error? debootstrap --variant=minbase buster /home/theuser/VMs/deb10files/ You'll get this error if you make a directory in your home........

  • Linux grub not using UUID for the root device instead it uses /dev/sda1 or other device name solution


    You can read lots of posts about this issue but there is not much information about why this is the case or how grub determines the root= device name. Some even suggest modifying grub.cfg manually which is a disaster as the next kernel update will cause grub to revert back to the device name. For most people this won't be an issue but those using template system, automated deployments and working in embedded may run into this issue with custom embedded and created minimal kernel........

  • How To Restore Partition Table on Running Linux Mint Ubuntu Debian Machine


    Here is an easy way to restore things if you have the starting point and size of each partition using fdisk: In this example we pretend that /dev/sda was wiped out, but the running system still has the info in /sys/class/block/sda Go into each partition and record the "start" and "size" hostdev@box /sys/class/block/sda/sda1 $ cat start 2048 hostdev@box /sys/class/block/sda/sd........

  • Grandstream Phone Vulnerability Security Issue Remote Backdoor Connection to 207.246.119.209:3478


    Have you checked your router/firewall logs and disconcertingly see connections to an unknown IP207.246.119.209:3478 from your Grandstream VOIPphones? You're not alone and the Grandstream forums have discussed this issue. However, even their own staff d........

  • Linux How to Check Which NIC is Onboard eth0 or eth1 Ubuntu Centos Debian Mint


    So say you happen to have 2 NICs of the exact same chipset, they will generally show up as the same name, with possibly a different revision in lspci. Normally this is not an issue if you have a server with 4 NICs, generally the eth0 to eth3 appears from left to the right (or right to left on some vendors) so it doesn't take much figuring out. Generally if you have different chipsets for different NICs, it should be easy to know which one is eth0 or the first NIC in the OS.........

  • Dell PowerEdge Server iDRAC Remote KVM/IP Default Username, Password Reset and Login Information Solution


    Are you new to the company, datacenter or a third party who is responsible for deploying a fleet of servers from scratch. The first step is to normally login to the KVM so you can perhaps manually reinstall, PXE boot the Cloud Image or reimage/reinstall an OS but you need access to the KVM/IP or what Dell calls iDRAC. It's common that you may have forgotten this information or that another employee or colleague has changed the info and did not tell you, that they have left the........

  • Enable Turbo Mode for CPU Ubuntu Linux Mint Debian Redhat


    Sometimes due to your BIOS/EFI you may find that you have chosen "Energy Efficient" for your CPU which may effectively disable turbo mode. This is because "Energy Efficient" will often restrict or throttle your CPU to the base speed. This can impact nearly any CPU such as Intel's, AMDs, Opteron, Xeon etc... This is of course frustrating, for example if you have a CPU that is 2.0GHz base speed but turbo to 2.5GHz, you will never hit more than 2GHz.........

  • Cisco UC CME How To Enable Licensed Features


    Router#show license Index 1 Feature: ipbasek9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted Lic........

  • grub blank screen how to manually boot kernel and initrd Linux Ubuntu Debian Centos won't boot solution


    You probably didn't do an "update-grub" and grub no longer has any proper menu entries, but before you can fix it let's try to get grub booting anyway. If you get this lovely black grub screen here's how you can get things booting. In my case I have a gpt partition with partition 1 and 2. Partion 1 is just my EFI / ESPand partion 2 /dev/sda2 is my root which includes /boot. You will have to adjust this if you had a separate /boot partition.........

  • Cisco Switch / Router How To Restore Factory Default Settings


    1.) Make sure your conf register is 0x2102 Do show version and at the very end of the output you will see the Configuration register. show version Configuration register is 0x2102 If the config register is not 0x2102 then enter this command: r1#configure terminal r1(config)#config-register 0x2102 r1(config)#end 2.) Let's Erase the NVRAM/flash........

  • How To Install convert MBR Legacy booting GRUB to EFI from a non-EFI Linux Environment Ubuntu Mint Debian


    1.) Create your EFI/ESP Partition If you happen to have some free space on the drive already then this is easy, just create a new partition of at least 100M. The nice thing about the EFI spec is that it must just be in the first 2.2TB of space so for most users, it means you can simply resize the last partition(downsize it by 100M) and then add an EFI partition at the end. For example if you had this partition scheme: /dev/sda1 = /........

  • Error opening tftp://10.0.2.2/network-confg (Permission denied) - How To Fix Cisco Router Switch Error Solution Console


    How To Fix This Cisco Switch/Router Error %Error opening tftp %Error opening tftp://10.0.2.2/network-confg (Permission denied) %Error opening tftp://10.0.2.2/cisconet.cfg (Permission denied) %Error opening tftp://10.0.2.2/router-confg (Permission denied) %Error opening tftp://10.0.2.2/ciscortr.cfg (Permission denied) %Error opening tftp://10.0.2.2/network-confg (Perm........

  • CentOS 7 / 8 cannot boot with with mdadm RAID array solution


    This article about migrating to a CentOS 7 /8 RAID mdadm array has a lot of info but I wanted to focus specifically on what newer versions of CentOS 7 require to boot mdadm and what changes are necessary on CentOS 7.8+ CentOS 7 / 8 mdadm RAID booting requirements This assumes you are chrooting into an existing install or using it to get a new deployment ready. However, these steps can........

  • md mdadm array inactive how to start and activate the RAID array


    cat /proc/mdstat Personalities : [raid1] [raid10] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] md124 : inactive sdj1[0](S) 1048512 blocks Solution, we "run" the array sudo mdadm --manage /dev/md124 --run mdadm: started array /dev/md/0_0........

  • i915 nouveau Nvidia GPU not starting lightdm Xorg failing solution for Could not determine valid watermarks for inherited state


    It may appear to be an Xorg or lightdm/gdm/mdm error but in reality for many users with this issue, it's a driver conflict and issue. I had a system that had two GPUs, an Intel and Nvidia GPU. The only thing that got it working was to remove the nouveau driver and blacklist it so it never came back, then the Intel GPU works fine without these issues. Solution sudo rmmod nouveau add nouveau/other driver to blacklist edit th........

  • Debian Mint Ubuntu Howto Disable Network Manager


    NetworkManager is normally good for GUI users who may not be good with manually confguring devices, but if you are using things like bridging and bonding, it will often break things. How To Disable NetworkManager systemctl disable NetworkManager Now that it's disabled you will need to stop NetworkManager. NetworkManager will still be running until you reboot next or manually stop it. How To Stop NetworkManager systemctl stop........

  • symbol 'grub_calloc' not found grub boot error solution / fix


    I've encountered this after upgrading some Debian/Ubuntu/Mint based systems for no explicable reason, although there are some bug trackers on Ubuntu that document this: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1889509 The short end of the solution is that you need to properly reinstall grub. 1.) Boot from a LiveCD 2.) Mount your root / filesystem and don't forget to mo........

  • /var/log/journal huge/too large solution in Debian Mint Ubuntu Linux Howot Fix


    Is your /var/log/journal overweight and bloated? For example a decent install of Debian 11 with most applications and services ends up being about 4.9G with the journal taking a few gigs. du -hs /var/log/journal/ 1.3G /var/log/journal/ By default in a lot of distributions there is no maximum size so it will keep growing. This is especially problematic for embedded distributions and devices, but is also a huge waste of sp........

  • RTL8821AU Setup Configure Wifi Realtek 8821 in Linux Debian Mint Ubuntu Howto


    The easiest way for the 8821AU Realtek Wifi chipset / TP-Link T2U Plus: Bus 002 Device 003: ID 2357:0120 TP-Link Archer T2U PLUS [RTL8821AU] First install your kernel headers/source/other required tools: sudo apt install linux-headers-`uname -r` make gcc bc Clone this github repo with the driver: git clone https://github.com/morrownr/8821au-20210708 Run the compile/ins........

  • How To Tell Which Repository a Package Comes From Debian Mint Ubuntu


    Just use apt-cache policy to find the repo of a package: apt-cache policy lxd lxd: Installed: 3.0.3-0ubuntu1~18.04.2 Candidate: 3.0.3-0ubuntu1~18.04.2 Version table: *** 3.0.3-0ubuntu1~18.04.2 500 500 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages &nb........

  • Linux Debian Mint Ubuntu How To Add Non-Free Repositories and Contrib


    You just add on "non-free" at the end of each repo, like the example below: If you wanted contributed packages then you could also add "non-free contrib" to each repo line. Don't forget to do an "apt update" to see the new packages, this is especially handy for getting more drivers for devices with the firmware-linux-nonfr........

  • WARNING: Unable to determine the path to install the libglvnd EGL vendor library config files. Check that you have pkg-config and the libglvnd development libraries installed, or specify a path with --glvnd-egl-config-path. Linux Ubuntu Mint Debian E


    If you get an error like this when installing the Nvidia drivers: WARNING: Unable to determine the path to install the libglvnd EGL vendor library config files. Check that you have pkg-config and the libglvnd development libraries installed, or specify a path with --glvnd-egl-config-path. Just install these packages: &nbs........

  • How To Do Linux Network Bonding Teaming in Mint Debian Ubuntu


    Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows. There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........

  • LXC Containers LXD How to Install and Configure Tutorial Ubuntu Debian Mint


    If you are using mint, delete the preference that stops snap from installing (as it is required for lxc) sudo rm /etc/apt/preferences.d/nosnap.pref 1. Install lxd: sudo apt install lxd Issues install lxd or errors? Click here Debian at this time does not have lxd so you'll need to use snap: sudo apt in........

  • GlusterFS HowTo Tutorial For Distributed Storage in Docker, Kubernetes, LXC, KVM, Proxmox


    This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory. Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage. One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........

  • Docker Tutorial HowTo Install Docker, Use and Create Docker Container Images Clustering Swarm Mode Monitoring Service Hosting Provider


    The Best Docker Tutorial for Beginners We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........

  • Zoom Password Error 'That passcode was incorrect' - Solution Wrong Passcode Wrong Meeting Name


    Have you been given a Zoom password that the meeting owner says is correct but it doesn't work anymore or never works? If the meeting name says "Zoom Meeting" and it's not really named that (which most meetings are not), then the issue is usually that there is an initial password to be able to join, aside from the passcode. It basically means that Zoom has deauthenticated you randomly or maybe after X amount of uses, without clicking on the Join Meeting URL which contains a........

  • How To Create OpenVPN Server for Secure Remote Corporate Access in Linux Debian/Mint/Ubuntu with client public key authentication


    Why choose OpenVPN instead of a firewall appliance? OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time. When comparing OpenVPN with traditional firewal........

  • tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE tag#4 Sense Key : Illegal Request [current] res 40/00:b4:98:02:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) solution


    You might assume you have a bad drive or the SATA interface/cable is bad, or the power supply is bad/weak to the drive. These are all possible issues, but definitely check your SATA cable for "twisting". It is a big issue because until the error stops or times out, your system will not boot (in my case this was the case even though the drive with the issue was not part of the OS or booting process at all). If you run an open rig that you move around often that ha........

  • Ansible Tutorial - Playbook How To Install From Scratch and Deploy LAMP + Wordpress on Remote Server


    1. Let's work from an environment where we can install Ansible on. If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way: sudo apt install gpg sudo add-apt-repository ppa:ansible/ansible sudo apt update........

  • QEMU/KVM How to Hot-add A Virtual Disk .raw/.qcow2 via QEMU Monitor Commands


    For a lot of reasons, it may be convenient to detach or attach live disks to a running VM without having to reboot it. Sure, you can use some network based storage, but when performance counts, attaching a new virtual disk will usually give you better throughput and lower latency in a quick testing situation. This doesn't work, why not? drive_add 0 if=virtio,file=/tmp/vm.qcow2,if=virtio,format=qcow2,id=rtt Can't hot-ad........

  • Proxmox How To Enable Ceph Distributed Storage Cluster with OSD and Pools


    How To Install Ceph If you stopped an install of Ceph midway you will need to manually restart it with "pveceph install" Remember that your VM needs to have working internet (gateway) and DNS in order to connect to the apt repo to download all of the packages that Ceph requires. Remember to repeat these steps for each node that you want Ceph on. ........

  • pulseaudio issue on QEMU/KVM guest VM when microphone is replugged/unplugged pulseaudio: pa_threaded_mainloop_lock failed pulseaudio: Reason: Invalid argument


    Here is the scenario, you are using QEMU/KVM and are using something like the AC97 sound driver to pass the host audio to the guest via pulseaudio. This is useful because you can transparently pass your mic input from the host which means you can mute your microphone from the host, which prevents the guest from receiving any mic input even if unmuted. Mute / Unmute Fix This issue also seems to happen even if you press the mute button on the microphone and then unmute,........

  • Cisco Howto Configure Console Port/Terminal/Comm Server with Async Cable Setup


    This assumes that you've already installed the relevant HWIC cards eg. Cisco Asynchronous Serial NIM These are essentially cards that you install into your router, once installed you connect an Async cable to one of the ports on the card which normally gives you 8 console cables and are normally labelled 1 through 8. You connect all of the cables to the devices you need (even non-Cisco devices) whether switches, routers or firewalls, they will usually work. The real m........

  • Ubuntu/Debian Linux/Unix Howto Setup Install Syslinux Bootable USB with EFI and MBR from Command Line/CLI Terminal


    There aren't too many simple guides that show you how to use commands to setup your USB or other drive as a normal bootable drive where you can easily boot custom kernels or whatever OS you would like. 1. Get the tools we need: We install "syslinux" for MBR and "syslinux-efi" for EFI and "MBR" as we need a tool that embeds the actual MBR into our USB: sudo apt install syslinux syslinux-efi mbr........

  • SSH cannot connect to old servers/devices/switches/routers/Cisco/Juniper Unable to negotiate with 192.168.20.2 port 22: no matching key exchange method found. Their offer: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hell


    A lot of older devices either support telnet or very old SSH keyx algorithms which are insecure and disabled by all newer/modern SSH clients for security reasons. However, sometimes you may be on a LAN via VPNor some other secured network or for whatever reason, absolutely, need to connect to this device and sometimes old/embedded devices may not be possible to update to a newer SSH server. If you run into this you may be using a modern/newer SSH client and get thi........

  • Cisco Router Password Reset Howto Guide Solution Cannot Login /Unknown Enable Password 2600, 2800, 2900, 3900


    It is common that you may get access to undocumented equipment and need to reset the password. This applies to many Cisco routers whether 2600, 2900, 3900 etc... Cisco's Guide says to hit Ctrl +Pause/Break but if it doesn't work on some devices causing people to say "cisco password reset pause break does not work", you can see Cisco's alternative key combinations here:........

  • Linux can't boot/grub boot loader screen with no options solution


    Usually if you get the grub boot loader and it doesn't show any boot options, it's because grub was not installed correctly and/or the partition that it is supposed to be on has changed or does not exist. It can also happen if you install Linux to one drive, but the boot loader to another by accident, whether EFI or MBR/Legacy mode. You can normally fix your booting/bootloader/MBR/EFI it by chrooting into your root partition: #become root sudo su........

  • EFI PXE grub2 Howto guide for Linux EFI PXE Booting on Debian, Mint, Ubuntu, RHEL


    Just a quick note and warning is that if you are testing to see if EFIPXE booting works on a VM, MAKE SURE it actually works. For example Iinitially tested using my Distro's QEMU 2.5+dfsg-5ubuntu10.46 and ovmf BIOS firmware (OVMF supports EFI). However, I found on old versions of QEMU (like 2.5), EFIbooting with GRUB NEVER works so it may appear that you have made a mistake when everything is fine when you boot a physi........

  • Juniper JunOS Command Overview and Howtos Switch, Router, Firewall Tutorial Guide


    Enable "cli" mode equivalent in JunOS cli Configure Mode configure So rather than going to the console on a Cisco switch and typing "enable" and then "conf t", the equivalent in JunOS is "cli" and "configure". How Do You Apply Changes You've Made? You can make all kinds of changes to the switch, but remember they are not........

  • qemu 4 compilation options


    How To Compile QEMU Manually (using sensible options) 1.) Download the QEMU source file you want. wget https://download.qemu.org/qemu-4.2.0.tar.xz 2.) Extract The Source File tar -Jxvf qemu-4.2.0.tar.xz 3.) Switch to the extracted source cd qemu-4.2.0 4.) Make sure we have the right libraries and tools to compile QEMU manually sudo apt install build-e........

  • Scanner not working in Linux Ubuntu Fedora Mint Debian over the network? Use sane-airscan!


    I have a Canon MF642c and the scanner wouldn't work. I tried to use saned but it didn't work with the BJNPlike it did for some other Canon models. Introducing sane-airscan with packages for the most common distributions: https://software.opensuse.org/download.html?project=home%3Apzz&package=sane-airscan http........

  • How To Boot, Install and Run Windows 2000 on QEMU-KVM


    Interestingly enough Windows 2000 works fine on QEMU 64-bit but you have to specify Pentium as your CPU otherwise it doesn't complete the install (it will not pass the detecting/setting up devices phase). -vga cirrus is wise because it is supported by Windows 2000 and allows higher resolutions and 24-bit color. -cpu Pentium emulates an old computer and is necessary for install to complete -device rtl8139 is important as this oldschool Realtek 8139 NIC is supported by W........

  • bash cannot execute permission denied


    $ ./test.sh bash: ./test.sh: Permission denied This happens normally because you are on a partition that was mounted as "user" and without the exec option. Also be sure to add exec at the end so no other options set noexec. Change your fstab or add exec to your mount options: /dev/md127 /mnt/md127 ext4 auto,nofail,noatime,rw,user,exec 0 0 ........

  • Huion and Wacom Tablets How To Install in Linux Mint / Ubuntu and make the stylus work properly


    It took a lot of fiddling to make a Huion Kamvas 13 Pro work in Linux but it simple once you know what to do. Don't bother searching as it is unlkely there is a guide out there that will actually make your tablet work. It mainly comes down to the fact that the hid_uclogic kernel module is buggy or doesn't support MANYof these wacom based/Huion tablets properly. What was happening with me is that Ihad the Kamvas 13 Huion setup as a secondary screen/monitor.&nb........

  • Linux How To Stop Missing Drive from Halting Boot Process in fstab


    When you automount a drive in /etc/fstab even if it's not important like an external drive that you only use sometimes and is not required for booting, it will prevent a successfuly boot. If you disable quiet mode for booting you will see something like below "A start job is running for dev-disk ...." How do we fix an fstab entry from preventi........

  • How To Replace Audio Track of Video using ffmpeg


    A very common use case is that you don't want to waste time using a video editor that requires you to open it up and manually import the video clip and audio clip, then manually delete the old audio track and import the video and new audio. That's too much work and time since we don't want to go through the hassle. ffmpeg is our solution, all we have to do is specify 3 variables and we're done! -i Windows2019-Server-Noaudio.mp4 is our in........

  • Linux Mint Ubuntu Debian Centos RHEL no sound solution


    This assumes your system is a fresh and normally working install. What often happens is that many new devices have multiple audio outputs which are generally analog and HDMI/Digital out. Sometimes the OS defaults to the wrong one that you didn't want. For example if your sound is supposed to play over the HDMI, perhaps the output is set to analog or vice versa.........

  • Linux Mint Dual Boot Install Avoid Wiping our your Main C: drive /dev/sda MBR and EFI


    Before you try to install and dual boot it is very important to understand the concept of "what boot mode your BIOS is in" and "what mode you booted the installer to". Then follow the example of Linux Mint (but most Linux installers are very similar)to carefully understand WHERE you are installing your Boot Loader to whether that be MBR or EFI. How Am IBooted? First it's important to check your BIOS to see........

  • QEMU-KVM soundhw deprecated how to enable sound in QEMU 4.x series


    In QEMU 4 or higher you can no longer use the normal "-soundhw ac97" flag and it is much more complicated but here is a simple copy and paste on Linux that will just work: -audiodev you have to use -audiodev to specify the driver and id driver=pa id=someid -device you have to specify the same audiodev id you used in -audiodev and driver -audiodev driver=pa,id=pa1 -devic........

  • apcupsd how to setup and monitor APC UPS units


    It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc.. wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866 tar -zxvf apcupsd-3.14.14.tar.gz cd apcupsd-3.14.14 [root@somebox apcupsd-3.14.14]# ./conf........

  • ?? Question Marks for time, permissions and size of a file?


    -?????????? ? ? ? ? ? shadow ----------. 1 root root 748 Jul 10 04:35 shadow- cat: shadow: Input/output error If you see this you are probably in big trouble, it could be a physical error or if it's a VM image that it is corrupted due to a physical error on the underlying disk/array/NAS or it could a........

  • mdadm how to stop a check


    Is a mdadm check on your trusty software RAID array happening at the worst time and slowing down your server or NAS? cat /proc/mdstat Personalities : [raid1] [raid10] md127 : active raid10 sdb4[0] sda4[1] 897500672 blocks super 1.2 2 near-copies [2/2] [UU] [==========>..........] check = 50.4% (452485504/897500672) finish=15500.3min speed=478K/sec ........

  • access denied by acl file qemu-kvm: bridge helper failed


    /usr/libexec/qemu-kvm -enable-kvm -boot order=cd,once=dc -vga cirrus -m 4096 -drive file=~/23815135.img,if=virtio -usbdevice tablet -net nic,macaddr=DE:AD:BE:EF:D4:AB -netdev bridge,br=br0,id=net0 qemu-kvm: -usbdevice tablet: '-usbdevice' is deprecated, please use '-device usb-...' instead access denied by acl file qemu-kvm: bridge helper failed [root@CentOS-82-64-minimal 23815135]# /usr/libexec/qemu-kvm -enable-kvm -boot order=cd,once=dc -vga cirrus -........

  • CentOS 6 impossible to compile a newer libguestfs


    yum -y install gcc make gperf genisoimage flex bison ncurses ncurses-devel pcre-devel augeas-devel augeas readline-devel checking for cpio... cpio checking for gperf... no configure: error: gperf must be installed configure: error: Package requirements (augeas >= 1.2.0) were not met: Requested 'augeas >= 1.2.0' but version of augeas is 1.0.0 yum remove augeas augeas-libs augeas-devel wget http://downl........

  • How To Get Started on Ubuntu with gpt-2 OpenAI Text Prediction


    apt install software-properties-common add-apt-repository ppa:deadsnakes/ppa apt update apt install python3-pip apt install python3.7 curl gnupg python3.7-dev git ln -s /usr/bin/python3.7 /usr/bin/python3 pip3 install numpy keras_preprocessing curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add - echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........

  • Linux How To Change NIC Name to eth0 instead of enps33 or enp0s25


    Most newer distros inexplicably cause your NIC to have what Icall "random" non-standard name conventions because of systemd. This is a big problem for many people and especially those running servers. Imagine that you have a static IPconfigured for ens33 but then the hard disk is moved to a newer system, the NIC could be anything from ens33 to enp0s1, meaning that manual intervention is required to go and update the NIC config file (eg. /etc/network/interfa........

  • virt-resize: error: libguestfs error: could not create appliance through libvirt.


    This is caused because the user is running as qemu for virt-resize and if qemu does not have privileges to read from the source and write to the destination, it will fail with the below. So either change the uid of qemu or change the ownership of the source and target. Solution: export LIBGUESTFS_BACKEND=direct virt-resize --expand /dev/sda2 /root/kvmtemplates/windows2019-eval-template.img /root/kvmguests/kvmkvmuser4515........

  • How To Speed Up Linux Ubuntu and Debian Based Computers By Improving CPU Performance and Changing the CPU Governor


    I used to believe that for Desktops especially that the "ondemand" CPUfrequency changing that kernels included with Ubuntu and Debian based distros have would be sufficient for snappy performance. However, you can feel the lack of performance on the fastest computer if you have ondemand. A lot of times even under high load 100% of your CPUfrequency in MHz will not be used. For example a 2.8Ghz CPUmay only run at 1.8MHz or even .9GHz. Now........

  • Convert data or file to base64 on a single line


    base64 has legitimate uses too and can be an easy way to store a file or data within actual code for developers to keep things in a single file. For example let's take an image we'll see for an application's background: base64 -w 0 some.jpg >some.jpg-base64 -w 0 makes it output to a single line which makes it easy to store in a variable. Without the -w 0 it will wrap over multiple lines.........

  • mdadm: super0.90 cannot open /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 is not suitable for this array.


    mdadm --create /dev/md0 --level 1 --raid-devices 2 /dev/sdb1 missing --metadata=0.90 mdadm: super0.90 cannot open /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 is not suitable for this array. mdadm: create aborted Sometimes running "partprobe" can fix this. Other times it requires a reboot. One other manual thing that can be done is the following to fix it (if dm is using and blocking it):........

  • QEMU KVM how to boot off a physical CD/DVD/BDROM Drive


    It's as simple as below where you just specify the dev device of the CDROM which is usually /dev/sr0. You can boot actual bootable discs like Windows, Linux, etc straight from a physical drive this way. sudo qemu-system-x86_64 -cdrom /dev/sr0 -m 4096 ........

  • How To Install python 3.4 3.5 and up on Linux with wine - Working Solution


    This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu! Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........

  • OpenVZ vs LXC DIR mode poor security in LXC


    It is unfortunate that LXC's dir mode is completely insecure and allows way too much information from the host to be seen. I wonder if there will eventually be a way to break into the host filesystem or other container's storage? OpenVZ better security: [root@ev ~]# cat /proc/mdstat cat: /proc/mdstat: No such file or directory /dev/simfs 843G 740G 61G........

  • Radeon R3 GPU on Debian Crashing


    Occasionally my whole screen locks up and I cannot even swith to the console and I find this in my syslog: *-display description: VGA compatible controller product: Mullins [Radeon R3 Graphics] vendor: Advanced Micro Devices, Inc. [AMD/ATI]  ........

  • Linux How To Add User To Additional Group


    sudo usermod -a -G groupname username It's really simple like above, the -a is for append so that you are not changing their main group, but adding them to another additonal group. Just change "groupname" to your group and "username" to the user you want to be added to "groupname". A common task these days is getting your user access to kvm for virtualization so the KVM/QEMUprocess........

  • Convert and install to LUKS Encrypted Drive Ubuntu 18.04 19.10 Linux Mint and Debian Based Linux


    The reason for doing this is that the installer doesn't seem to work properly for LUKS and the server installer doesn't even support LUKS anymore. When you use the GUI install on Desktop for LUKS it won't boot and will just hang after you enter your password. So the only reliable way is to do it ourselves. 1.) Make a default minimal install of Ubuntu 2.) Have a secondary disk on the server or VM. 3.)........

  • CentOS 8 how to convert to a bootable mdadm RAID software array


    The cool thing here is that we only need 1 drive to make a RAID 10 or RAID 1 array, we just tell the Linux mdadm utility that the other drive is "missing" and we can then add our original drive to the array after booting into our new RAID array. Step#1 Install tools we need yum -y install mdadm rsync Step #2 Create your partitions on the drive that will be our RAID array Here I assume it is /dev........

  • ADATA USB Thumb Drive Issues


    This is the reason that I don't like the new ADATA USB drives such as the UV128/64GB or 128GB drives and other ones that look to be the same style (the green sliding USB connector). They just don't work well from new and never work properly at any point. [ 788.242463] usb 1-1.2: new high-speed USB device number 16 using ehci-pci [ 788.339816] usb 1-1.2: New USB device found, idVendor=125f, idProduct=db8a [ 7........

  • dd how to backup and restore disk images including compression with gzip


    dd is a very handy tool and there are some more practical things we can do. For example if we want to dump a 3TB drive and want to preserve it and only 200GB are being used on the 3TB we can save a lot of space with gzip. Backing Stuff up with dd How to Use dd to backup a raw hard drive and tar gzip at once Change /dev/sda to the drive you want to backup Change /mnt/extras........

  • mpv / mplayer with Radeon / AMD GPU Video Card Driver enable VDPAU GPU Accelerated Video Decoding


    The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration. Let's manually play with vdpau to make sure it works before we make it permanent: First make sure you have libvdpau installed: sudo apt install vdpau-driver-all If yo........

  • How To Install Asterisk 16 17 on Debian Ubuntu Linux


    Downloading and compiling from source to get the latest version of Asterisk is really simple with this guide. apt install gcc make g++ libedit-dev uuid-dev libjansson-dev apt install libxml2-dev sqlite3 libsqlite3-dev wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-16-current.tar.gz tar -zxvf asterisk-16-current.tar.gz cd asterisk-16.6.2/ ./configure If you get this error change y........

  • Linux Ubuntu Debian Centos How To Make a Bootable Windows 7, 8, 10, 2016, 2019 Server USB from ISO


    Use fdisk on your USB drive to create a bootable NTFS partition (in my case /dev/sdb): sudo fdisk /dev/sdb Welcome to fdisk (util-linux 2.27.1). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Command (m for help): n Partition type p primary (0 primary, 0 extended, 4 free)........

  • How To Restore Windows MBR Bootsector from Linux using syslinux


    There are many ways but a favorite way is to boot any Linux LiveCD and to use the syslinux package like so: Just change the "sdx" to your sd for example /dev/sda or whatever the drive is that is supposed to boot Windows. sudo dd if=/usr/lib/syslinux/mbr/mbr.bin of=/dev/sdx 0+1 records in 0+1 records out 440 bytes copied, 0.0197808 s, 22.2 kB/s........

  • Cannot Print PDF Solution and Howto Resize


    If you can print other PDFs but not a particular one it is very likely that the PDF size is A4 (the longer, skinnier Asian paper size) instead of the North American letter size ( 8.5" x 11"). This breaks printing in most cases. Or it may print if you find a program that ignores the size issue. Here is an example of an A4 being rejected by a printer in Ubuntu Linux via CUPS Cannot print PDF CUPS Samsung C460: Processin........

  • qemu-kvm error "Could not initialize SDL(No available video device) - exiting"


    Now older versions of qemu-kvm didn't throw this error say if you just had "-video cirrus" when starting qemu-kvm. But newer versions do care. And this probably only applies to you if you are running from bash/terminal with remote kvm images. What you need to do is remove the "-video" part and just add -vnc :5 eg. this would fix the error: qemu-system-x86_64 -enable-kvm -boot order=cd,once=dc -m 1024 -drive........

  • Debian Ubuntu Mint Howto Create Bridge (br0)


    Having a network bridge allows you to bridge traffic under multiple devices so they can talk natively without using any special routing, iptables/firewall or other trickery. To create your bridge you need the bridge-utils package for brctl and if you want to do things like bridge VMs that run on a tap device you will need the uml-utilities which provides "tunctl". 1.) Install the utilities to make our bridge sudo apt-get i........

  • Debian Ubuntu and Linux Mint Broken Kernel After Date - New Extra Module Naming Convention


    I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules. One other weird thing is that sometimes........

  • Cisco Unified Communications Manager / CUCM IP 8.6,10,12 Install Error Solution


    Install Errors on Version 12: This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5 on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error. *Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install. What really causes this even though you successfully install........

  • Cisco Unified Communications Manager 12 Install Errors on Proxmox/KVM


    The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs. qemu-kvm command: /usr/libexec/qemu-kvm -version QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard ........

  • Linux delete unused tap devices automatically


    This will find all tap devices and try deleting all of them. Of course don't run this if there is a chance an unused tap device is necessary and would not be created by the script ro application using it. for tap in `ifconfig -a|grep tap[0-255]|awk '{print $1}'`; do tunctl -d $tap done........

  • QEMU-KVM Windows and Server Guest Installs Mouse Tracking Pointer Location Solution


    You may have noticed if you are running QEMU/KVMmanually that in Windows the the position of the physical mouse does not match where the mouse is positioned within Windows. There is an easy command to pass to qemu-kvm or qemu-system (whatever you call your binary): -usbdevice tablet The above flag will fix your mouse pointing problems whether you are running Windows 95, 98, NT, XP 2000, 2003, Vista, 7, 8 10 or Server 2000, 2003, 2008, 2012, 2016 or 2........

  • chroot in Linux Howto Simple and Easy Guide


    chroot which stands for change root allows you to virtually operate in another operating system even though you haven't booted it. It is commonly used to deploy new distros, applications and to fix a broken Linux/Unix install or prep a new system image without having to physically boot the drive or disk. So in this example let's say we have a drive that has a Linux OS installed on /dev/sdb1 and we have mounted this partition on /mnt/sdb1 The key point is to edit the &quo........

  • Cisco Router Setup Guide and Tutorial Howto With Commands and Examples


    In most of the Cisco router IOS I find the ports like ge0/0 ge0/1 and ge0/2 or whatever your ports are down. They will not even give you a link light. So one of the first tasks should be getting the port you are working with up. In my case the first goal is often connectivity with the LAN and WAN. LAN = your local area network (eg. in the office/home ) WAN= your ISP/public internet (eg. fiber/cable/dsl/ethernet).........

  • How To Boot Cisco CUCM UCSInstall 8.6, 10, 11 and 12 on KVM/Proxmox


    The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported. Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........

  • proxmox vm networking breaks when you restart your network on the hostnode


    Idid a systemctl restart networking and it broke Proxmox VM connectivity! #proxmox is the problem after restarting the network the tap devices go to disabled state [2230884.919905] vmbr0: port 7(tap118i0) entered disabled state [2230884.948864] vmbr0: port 8(tap122i0) entered disabled state [2230884.972748] vmbr0: port 6(tap119i0) entered disabled state [2230885.004745] vmbr0: port 5(tap117i0) entered disabled state [2230885.03673........

  • LUKS Hard Drive Encryption on Linux Mint Ubuntu Debian etc how to mount encrypted hard drive


    The key thing here is to know the actual partition that is encrypted. Often in Linux Mint's installer that ends up being partition 5 or /dev/sda5 sudo cryptsetup luksOpen /dev/sda5 anynamehere You will then be prompted for your irrecoverable passphrase: Enter passphrase for /dev/sda5: If all goes well it won't say anything further. If it says ""No key available with this passphr........

  • How to use nmap locate other machines/computers/servers on your network using nmap


    A lot of people think arp wil do it but the arp table will only show devices you have communicated with. Using nmap is a quick and simple way to scan a range to find a machine you may not know the IP for: eg: nmap -sP 10.1.5.0/24 Just change the above to your subnet........

  • Centos 7 Reallocate logical volume space to another


    Do you hate how Centos 7 defaults to allocating most of your valuable space to /home even though it is a production server? Here is a quick guide on how to take back that space live, while online (of course make sure you have backups just in case something goes wrong!): First we will reduce our home dir by 100G: lvreduce -L -100G /dev/mapper/centos-home WARNING: Reducing active and open logical volume to ........

  • lvm how to reduce volume size


    lvreduce -L -100G /dev/mapper/centos-home Do you really want to reduce centos/home? [y/n]: y Size of logical volume centos/home changed from ........

  • Proxmox Breaks Storage/LVM Backing If Killing QEMU-IMG


    I tried to stop a qemu-img copy or clone and it broke everything. It was fine to "stop" it from the GUI but a process still persisted so I killed the relevant qemu-img and the kernel went crazy. It also may not have helped that I tried to lvremove a different volume (an unused disk). But either way it breaks LVM (you cannot even run lvdisplay) so a reboot is necessary. Jan 17 06:45:21 testserver kernel: [ 5680.439337] systemd-udevd D 0&nbs........

  • Linux wlan0 check all wireless clients


    iw dev wlan0 station dump This is very useful because it is helpful if you are running something like hostapd and need to see the signal strength and negotiated connection speed. Station ff:ff:ff:ff:ff:ff (on wlan0) inactive time: 16309 ms rx bytes: 25451 rx packets: 325 tx bytes: 44381 tx packets: 159 tx retries: 0 tx failed: 0 signal: -72 [-72] dBm signal avg: -72 [-72] dBm........

  • bind named error solutions named[2169]: error (no valid DS) resolving / error (broken trust chain) resolving / : error (no valid RRSIG) resolving 'com/DS/IN':


    Below are the common errors you'll get with named AKA bind if your time is incorrect. The simplest solution is to install and run ntpd to correct your system's time (install ntpd if it is not installed) systemctl start ntpd systemctl enable ntpd Dec 20 13:36:16 hostingbox named[2169]: error (no valid DS) resolving 'develop.waxrain.com/A/IN': 14.215.150.17#53........

  • Linux use growisofs to burn a larger file on a BD-R / Bluray Disc


    growisofs -Z /dev/sr0 critical.tar.gz.gpg Executing 'genisoimage critical.tar.gz.gpg | builtin_dd of=/dev/sr0 obs=32k seek=0' I: -input-charset not specified, using utf-8 (detected in locale settings) File critical.tar.gz.gpg is larger than 4GiB-1. -allow-limited-size was not specified. There is no way do represent this file size. Aborting. :-( write failed: Input/output error #remember to us........

  • Linux partprobe/partx cannot access last and 4th partition


    On a test machine Iwas never able to access to a newly created 4th partiton. As we can see there are dev devices for everything but the 4th partition. The normal "partprobe" or "kpartx" or kernel being told to rescan the block device didn't help (only a reboot did). fdisk -l /dev/sda Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units........

  • DRBD Errors Caused By Physical Corruption


    In a RAID array I had a have periodically lost a drive here and there over the past several months. Iwas always able to readd and resync without losing data. However at some point it looks like some minor corruption happened and this makes DRBD unhappy. Using fsck did not help either. Dec 19 06:01:45 storageboxtest4 kernel: [19005.945890] EXT3-fs error (device drbd0): ext3_get_inode_loc: unable to read inode block - inode=22184379........

  • mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument solution


    mdadm --manage /dev/md125 -a /dev/sdb4 mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument Dec 19 01:23:48 storageboxtest kernel: [ 2328.854491] md: sdb4 does not have a valid v1.2 superblock, not importing! Dec 19 01:23:48 storageboxtest kernel: [ 2328.854499] md: md_import_device returned -22 #zero the superblock and try again! mdadm --zero-superblock /dev/sdb4 mdadm --ma........

  • Why SMART is not smart at all and doesn't properly predict disk errors that cause a kernel panic or crash


    Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated. It has caused a kernel panic and system crash repeatedly as we can see from the logs. But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector. Any time I have had anything but 0 for that attribute it........

  • iSCSI on Centos 7 Configuration and Setup Guide for Initiator and Target


    initiator = client target = server These are the first concepts you should understand which is that in iscsi essentially the "initiator" is the client and the "target" is the server. iSCSI is derived from the old fashioned SCSI that us oldtimers grew to love. The "i" stands for Internet and the SCSI stands for "Small Computers Systems Interface" (SCSI). iSCSI Target (Server)Setup targetcli is the pac........

  • How Does Cisco CUCM (Cisco Unified Communication Manager) Work?


    Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments. Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........

  • systemd management using systemctl and journalctl to check systemd logs


    systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system. The key commands or arguments you will use with systemctl are the following: Unit Commands: list-units [PATTERN...] List loaded units &nbs........

  • What is /dev/pts and why do we need it in Linux?


    A quick check in /dev/pts shows a lot of entries but what are they for?: ls /dev/pts 0 10 12 14 16 18 2 21 23 25 27 29 30 32 4 6 8 ptmx 1 11 13 15 17 19 20 22 24 26 28 3 31 33 5 7 9 Basically they are pseudo-termi........

  • hwloc-nox set CPU affinity in Linux


    sudo apt-get install hwloc-nox Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: hwloc-nox 0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded. Need to get 151 kB of archives. After this operation, 453 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubunt........

  • PHP Displaying Blank Page on Apache


    Almost always the reason will be that the php.so file is missing but also that php.conf is misconfigured. In the problem machine it is actually PHP7 installed so if you reference PHP5 of course things wil be broken! Take for example here: cat /etc/httpd/conf.d/php.conf # # PHP is an HTML-embedded scripting language which attempts to make it # easy for developers to write dynamica........

  • VMWare ESXi 6.7 SSH/PowerShell CLI Commands


    [root@localhost:~] BootModuleConfig.sh echo host-ind nfcd........

  • error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory


    ./tronwatch: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory [root@testing linux-unpacked-1.0.7]# Solution: yum -y install alsa-lib-devel........

  • ./xmr-stak: error while loading shared libraries: libmicrohttpd.so.10: cannot open shared object file: No such file or directory


    The solution is just to install libmicrohttpd-dev ./xmr-stak ./xmr-stak: error while loading shared libraries: libmicrohttpd.so.10: cannot open shared object file: No such file or directory libmicrohttpd libmicrohttpd10 - library embedding HTTP server functionality libmicrohttpd-dbg - library embedding HTTP server functionality (debug) libmicrohttpd-dev - library embedding HTTP server functionality (development) $ sudo apt-get i........

  • Debian Mint Ubuntu compiling xmr-stak


    sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3 sudo apt-get install libcurl4-gnutls-dev git clone https://github.com/wolf9466/cpuminer-multi sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev git clone https://github.com/fireice-uk/xmr-stak-cpu.git make install cd bin chmod +x xmr-stak-cpu ./xmr-stak -O xmr........

  • *** These critical programs are missing or too old: gawk


    checking whether autoconf works... ../configure: line 5377: 7325 Segmentation fault $AUTOCONF $ACFLAGS configure.in > /dev/null 2>&1 no configure: error: *** These critical programs are missing or too old: gawk *** Check the INSTALL file for required versions. ........

  • wodim / cdrecord error cannot burn DVD or BDR .iso Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error


    dvd+rw-mediainfo /dev/sr0 INQUIRY: [ASUS ][BW-16D1HT ][3.00] GET [CURRENT] CONFIGURATION: Mounted Media: 11h, DVD-R Sequential Media ID: RITEKF1&n........

  • linux mint image convert menu option missing solution


    Ialready have the caja-image-converter option installed but it shows nothing. Weirdly enough if you install nemo and nautilus converter it does show and work inside caja: The solution is to install *-image-converter sudo apt-get install *-image-converter Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'n........

  • Linux How To Eject and Insert a CD-R/DVD-R/BD-R Disc


    Many people are aware of the "eject command" which works as you would expect. To eject the disc: sudo eject /dev/sr0 To insert the disc again you still use the same command but with the "-t" close try toggle: sudo eject -t /dev/sr0 ........

  • Linux Mint 18 Screen Goes Dark or Black After Screensaver or even when using the Desktop Solution


    You can search for this bug and it seems like it may be related to ecryptfs and is many years old. The symptoms are that you return to the computer and the screensaver was active or the screen was asleep/black and it doesn't seem to come back. But you check by SSH the computer is running fine and are frustrated you'll lose your running programs and have to reboot. There is a simple solution: Ctrl + Alt + F1 Ctrl +Alt + F8 Ba........

  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........

  • OpenVPN cannot ping remote IP routing loop issue after connecting


    Sometimes if you have a very basic configuration OpenVPN on the client side for some reason sends all traffic to the OpenVPN server IP through the tun0 which is of course impossible and creates a block or routing loop. This is because you need to use your normal ISP/LANgateway to hit the OpenVPN server if it is remote/offsite as is usually the case. So if you are connected to the OpenVPN through say a tun0 device and your routing is set to connect to the OpenVPN&nbs........

  • Linux Mint Black Screen after boot no graphics solution


    This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help. Here is the short end of the stick that fixed it: sudo apt-get install mdm mate-desktop-environment Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........

  • How To Turn Any .iso file into a bootable USB drive


    This works for almost all ISO's Ifind (at least Linux based): sudo dd if=CentOS-6.9-x86_64-minimal.iso of=/dev/sdg bs=20M 20+1 records in 20+1 records out 427819008 bytes (428 MB) copied, 118.233 s, 3.6 MB/s Of course change the .iso filename above and the /dev/sdg to your desired USB drive!........

  • Apache htaccess Custom ErrorDocument not working properly for root home page 403 Error Issue and Solution


    So I have a domain "testdomain.com". Inside test domain.com's root is the following .htaccess: Options +FollowSymLinks -Indexes ErrorDocument 403 /launch/index.html Order Deny,Allow Deny From All Allow From 192.168.1.2 When you visit anything other than root things work fine. Eg. if you visit http://testdomain.com/somedirfile.html It will show the right error in /launch/........

  • Linux input/output error invalid program cannot read data on some CD-Rs and DVD-Rs on ASUS BW-16D1HT


    I've never seen this before in all of my years. Ihave some very old CDs and DVDs 12-15 years old that seem not to work in this BD-R/DVD-R/CD-R Asus drive. The discs are fine actually and ironically they even work fine on a normal LG USB based BD-R drive! Here are the errors in Linux: [2914936.884924] attempt to access beyond end of device [2914936.884927] loop1: rw=0, want=730424, limit=688384 [2914954.556873] attempt to........

  • Linux How To Clone One System Harddrive to another remote system


    The easiest way is to use SSHand DD or a combination of netcat. SSHwill be a little slower due to encryption but is the most secure way (on two older systems the average clone speed is about 40-50MB/s). This is also OS independent as it doesn't matter what the source OS is because you are literallly cloning the drive so you retain the partition table and settings. Clone HDD using SSH and DD........

  • Ubuntu/Debian/Linux won't boot and drops to Busybox shell after cloning HDD with dd


    I don't recall having this issue in the distant past but nowadays at least Debian seems to be very picky about this. I used dd to copy one hard drive to another and tried booting it. Everything seemed fine with grub working but each time it would drop to the busybox shell. There is no particular error so this is misleading. Normally the first things you would check are to make sure your fstab is correct (that the UUID is correct)and that you've updated grub.&........

  • GCC 5 on Centos 6 - How To Install


    Install requirements: yum -y install gmp-devel mpfr-devel libmpc-devel glibc-devel glibc-devel.i686 zip unzip jar Download, untar, configure, compile and install GCC http://mirrors.kernel.org/gnu/gcc/gcc-5.5.0/gcc-5.5.0.tar.gz tar -zxvf gcc-5.5.0.tar.gz cd gcc-5.5.0 ./configure make make install Now you need to cleanup th........

  • Linux how to view video card make and exact model


    Normally lspci will show you just like this and would suggest they are exactly the same card: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) 1c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) lspci -vnn is the answer As we can see one is a Gigabyte and the other is an MSI card. Wha........

  • How to Update Linux /usr/share/misc/pci.ids


    This works with lspci and if it's outdated may not give you the exact manufacturer and device model. For example take these 3 different RX 580's: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) 1b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) 1d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) You ca........

  • pcimodules and lspci not working alternative solution


    pcimodules no longer works it produces nothing probably because the format of /sys/bus/pci is different. lspci -k doesn't work on older lspci versions. pciutils can be compiled but it won't work if you have an old system and compile on a newer glibc. iteriate through /sys/bus/pci/devices/*/modalias cat /sys/bus/pci/devices/*/modalias pci:v00008086d00001237sv00000000sd00000000bc06sc00i00 pci:v00008086d00007000sv0000000........

  • cannot mount kvm ntfs image


    guestmount -a kvmuserscra.img -m /dev/sda1 mount libguestfs: error: mount_options: /dev/sda1 on / (options: ''): mount: unknown filesystem type 'ntfs' guestmount: '/dev/sda1' could not be mounted. guestmount: Did you mean to mount one of these filesystems? guestmount: /dev/sda1 (ntfs) guestmount: /dev/sda2 (ntfs) yum -y install ntfs-3g still........

  • mdadm how to mount inactive array


    myguy@devbox:~$ sudo mdadm -As myguy@devbox:~$ cat /proc/mdstat |grep sdf md125 : inactive sdf3[2](S) sudo mdadm --manage /dev/md125 --run mdadm: started /dev/md125 ........

  • How to find and mount mdadm arrays automatically


    A great way if you have a bunch of drives and mdadm connected and are looking for backups/archives and don't know what is where! for md in `cat /proc/mdstat|grep md[0-99]|awk '{print $1}'`; do mkdir /mnt/$md; mount /dev/$md /mnt/$md; done........

  • FreeBSD/OpenBSD OpenVPN Client error "Cannot allocate TUN/TAP dev dynamically"


    I have never had this error on Linux and this is running FreeBSD as root: Wed Aug 9 04:29:34 2017 us=329050 Cannot allocate TUN/TAP dev dynamically Wed Aug 9 04:29:34 2017 us=329832 Exiting due to fatal error The Solution you need a kernel module that is for some reason not automatically loaded like Linux: kldload if_tap........

  • Linux bash script to see what connected computers respond to ping


    A great way when moving your equipment to a new location, new router/switch etc to help confirm what MAC has what IP: for ip in `arp -na|awk '{print $2}'|sed s/(//g|sed s/)//g`; do echo ping $ip ping -c 1 -w 1 $ip > /dev/null if [ "$?" == 0 ]; then echo "$ip UP" fi done........

  • Cannot allocate TUN/TAP dev dynamically - FreeBSD/OpenBSD OpenVPN Client error Solution


    I have never had this error on Linux and this is running FreeBSD as root: Wed Aug 9 04:29:34 2017 us=329050 Cannot allocate TUN/TAP dev dynamically Wed Aug 9 04:29:34 2017 us=329832 Exiting due to fatal error The Solution You need a kernel module that is for some reason not automatically loaded like Linux: kldload if_tap........

  • kdenlive titles/text renders as white screen when using .sh script


    When using the .sh script the rendering doesn't work after an upgrade of related packages to kdenlive. kdenlive (kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1)) with affine or composite transitions was fine but is now broken during the time of transition it is just a white screen. The previous version was fine: kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1 But now I can't find it or install it:........

  • /usr/bin/ld: cannot find -lboost_system-mt-s /usr/bin/ld: cannot find -lboost_filesystem-mt-s /usr/bin/ld: cannot find -lboost_program_options-mt-s /usr/bin/ld: cannot find -lboost_thread-mt-s collect2: error: ld returned 1 exit status make: *** [cag


    cagecoin linux compile: sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev Solution: sed -i s/"BOOST_LIB_SUFFIX=-mt-s"/"#BOOST_LIB_SU........

  • Wine uninstalled broken on Linux Mint


    Solution: Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt sudo aptitude install wine The following NEW packages will be installed: ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6 wine1.6-amd64{a} wine1.6-i386:i386{a} The following packages will be REMOVED:........

  • ffmpeg trouble concatenating similar but different files


    When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right. Solution for me: My example uses 3 videos in total so "n=3" and a=1 to include audio. ffmpeg -threads 12 -i file1.mp4 -........

  • Linux Mint USB Kernel Tainted and Locked Port/Dev File


    Essentially a program I was running for mining did not terminate properly with Ctrl+C it is listed as defunct and cannot be killed, kernel is tainted and normal tricks to disable the port are impossible the dev and sys entries for the device cannot be browsed or interacted with in any form without a lockup of the request. The only solution is to reboot due to the kernel taint as far as I can find so far. [1130246.811056] INFO: task minerd:21861 blocked for more th........

  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd ffmpeg-3.3.2/ ./configure --disable-yasm install prefix /usr/local source path ........

  • OpenVZ error : Container start failed (try to check kernel messages, e.g. "dmesg | tail") Locked by: pid 166638, cmdline vzctl start 888171


    This container won't start after exhausting its memory. There are no relevant or helpful messages in dmesg or vzctl.log as well. Standard troubleshooting such as disabling PPP etc has not helped. 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Locked by: pid 166029, cmdline vzctl start 888171 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container already locked 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container was stopped 2017-07........

  • Linux how to copy GPT partition table with dd


    The old MBR 512 bytes partition table is no longer valid if you are using GPT. To copy a GPT table with dd to another disk do it like so: Below sda is the source disk and destination disk is sdb (change to meet your needs). Depending on how you use this, you have to be careful. The assumption is that you should only dump the partition table back to a disk you will newly format. If not you'll need to ch........

  • Migrate Centos 7 from Single HDD to mdadm RAID 10 array:


    Done on Centos 7.3 very important as clearly based on older guides it was a lot easier and more simpler! Hint do not use grub2-install! If you have trouble booting after this check this CentOS mdadm RAID booting/fixing guide. One huge caveat if you are an oldschool user or sysadmin who has avoided UEFIbooting The nor........

  • How to change reserved blocks in Linux partition


    user@box:~$ sudo tune2fs -l /dev/md99 [sudo] password for user: tune2fs 1.42.9 (4-Feb-2014) Filesystem volume name: Last mounted on: /mnt/md50 Filesystem UUID: 976a8655-2619-4587-878c-dab07f7b7652 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Fi........

  • Centos 7 A start job is running for dev-mapper-clx2droot.device (8min 44s / no limit)


    This error is usually because of some sort of encryption in this case a Seagate enclosure with encryption (even though not enabled) did not allow this hard drive to boot.........

  • USB 3.0 External HDD Enclosure Seagate UAS problems - [sdd] tag#1 CDB: Write(16) 8a 00 00 00 00 01 70 04 08 68 00 00 00 08 00 00


    This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether. Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........

  • Centos 7 Cudaminer Nvidia setup guide


    I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us yum install automake curl openssl-devel libcurl-devel gcc gcc-c++ yum -y install kernel-devel-`uname -r` yum -y install unzip #the........

  • USB 3.0 PCI x1 Card Review VIA VL805 on Linux Review and Experience


    This is a VIA made VL805 USB 3.0 Chipset with 4-ports and MOLEX powered. First of all this unit was cheap at about only 9 USD with fast shipping. My biggest concern was if this was a quality unit and would it really give you full USB 3.0 speeds (some people reported with similar cards that for some weird r........

  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........

  • USB Device/MP3 Player not working properly and can't browse the device filesystem? Check the cable twice and again!


    Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues. Take for example the error messages from Linux Mint: [804829.895414] usb 1-1: USB disconnect, device number 11 [806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........

  • Apache SSL very slow response with Firefox Freezes/Loads Very slow when checking self-signed SSL certificate


    I was sure this was a Centos bug with OpenSSL, Apache, MySQL or even PHP. I tried everything but nothing helped. One clue is that if you check the Apache logs you will see nothing in the access logs until minutes later (this means Firefox has not even passed your request to the remote Apache/htttpd server). When even accepting the invalid certificate message that would show up minutes later when trying to "View the Certificate" Firefox would freeze. This bu........

  • Track 01: 34 of 1726 MB written (fifo 100%) [buf 99%] 3.6x.Errno: 5 (Input/output error), write_g1 scsi sendcmd: cmd timeout after 1.897 (40) s CDB: 2A 00 00 00 44 A9 00 00 1F 00 resid: 6144 cmd finished after 1.897s timeout 40s write track da


    These errors believe it or not are simply because of not being the root user or running with sudo! However if you didn't know to try as root you'd think there was a problem with your burner or disc Essentially it looks like without root you cannot send the required scsi commands to continue writing. Ithink cdrecord should have built-in tests or safeguards to see if it has the permissions to run the required commands. I guess for more advanced users the idea is simila........

  • Linux Mint Install Netboot PXE Guide Howto


    *Update so this doesn't work it must be something to do with the path of nfs or something else but the installer fails with "Installer crashed" at the end whereas with the CD/USB it works. This assumes you've already installed and configured a separate PXE/DHCP server somewhere else and your /tftpboot directory is setup. This is for Linux Mint 18.1 but generally applies to most versions although you may have tro change things like "casper"........

  • Linux shows my drive as being dead is it really? Buffer I/O error on device sdb, logical block 0 sd 3:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00


    Normally the below would indicate a failing or failed drive. In this case the SATA port was unplugged and sometimes the Linux kernel/motherboard even with AHCIjust don't play nice and can't handle it. What happened is Iplugged in a new drive after removing another one. However the log shows that after the old drive was plugged in the Linux kernel kept complaining thinking the drive was there but not responding properly. This continued even with reseating........

  • Linux bash script how to generate a random password using /dev/urandom


    This command will generate a random password using all letters and numbers that is 20 characters wrong based on /dev/urandom (for the most truly random output). echo `< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-20};echo;`........

  • How to create openssl md5 password hash to use in /etc/shadow using bash


    Very useful in embedded and other non-standard deployments. The above makes a random salt of 14 random characters from /dev/urandom (you can change the -14 to whatever number of characters you want for your salt). openssl passwd -1 -salt `< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-14};echo;` YourPassword Output: $1$eW-ScuyL$f/iKMJ5mbJ..7bSzvX6EO0 How To Create Password Has........

  • How to verify SSL SHA-1 Certificate Fingerprnit Signature of your mail/web server to avoid hijacking/man-in-the-middle attacks


    This is especially helpful if you run your own servers. If you are presented with an error message or warning that the signature has changed or does not match the IP/domain you are connecting to you always want to verify manually. So your e-mail/web client will show you an SHA-1 fingerprint like this: "Could not verify this certificate because the issuer is unkown" or other reasons such as a mismatch in IP/domain. It will also show you........

  • What happens when you unplug 1 or more devices from an mdadm RAID array to simulate a failure in Linux Ubuntu/Centos/Debian?


    In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below. mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore. [45817.162728] ata4: exception........

  • Migrating from Linux Mint 17.2 mdadm RAID array to a new one (because I upgraded to larger drives).


    1.) Replicate the number of partitions in your new drives. gdisk /dev/sda gdisk /dev/sdb I created 3 partitions of the same same size. partition #1: +1G (/boot) partition #2: +60G (swap) partition #3: rest of it (/) #note if you are using GPT/gdisk you need to create separate a partition at least 1MB in size (in my case I would a 4th partition and mark it type ef02).........

  • mdadm how to recover from failed drive


    Remove the failed partition /dev/sde1 mdadm --manage /dev/md99 -r /dev/sde1 mdadm: hot removed /dev/sde1 from /dev/md99 Now add another drive back to replace it: # mdadm --manage /dev/md99 -a /dev/sdf1 mdadm: added /dev/sdf1 A "cat /proc/mdstat" should show it resyncing if all is well.........

  • mdadm and lvm how to completely disable and remove vg/pv/lv


    In short the solution is just to use vgremove for the actual /dev/mapper device: vgremove /dev/mapper/backups-backuplv box mnt # mdadm --manage /dev/md8 --stop mdadm: Cannot get exclusive access to /dev/md8:Perhaps a running process, mounted filesystem or active volume group? box mnt # lv lvchange lvconvert lvcreate l........

  • mdadm frozen and doesn't realize array is dead/missing failed due to unplugged drives


    This was a surprising bug but I unplugged all drives for an array md127. At first it was just 1 drive and mdadm seemed to notice this. I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it. This created problems trying to unmount it or even to stop this array with mdadm freezing. As for how to fix it I can only think of making sure you are not in a mounted path of........

  • mdadm how to make inactive array active


    This happens when you assemble array it doesn't mean it will be active for many reasons: md20 : inactive sdf1[2](S) 732442488 blocks super 1.2 Solution: sudo mdadm --manage /dev/md20 --run........

  • ERROR 2013 (HY000): Lost connection to MySQL server during query


    The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files. UPDATE user SET password=password("newpass") WHERE user='root'; flush privileges; ERROR 2013 (HY000): Lost connection to MySQL server durin........

  • fdisk wq causes hung process


    I created a new partition table on a newly plugged in device and it caused fdisk to hang (even force kill does not work). It also may be a bad drive or some other issue because fdisk -l hangs after the first 2 HDDs (totaly of 8 HDDs on this system): [1232879.903596] INFO: task fdisk:27176 blocked for more than 120 seconds. [1232879.903607] Tainted: P&nbs........

  • ADATA SU800 256GB 3D NAND Flash SSD Test & Review


    I keep reading these drives are slower, but they are cheap and still SSDand work very fast for my needs. As you can see the sequential read is 481-491MB/s, if I put them in MDADM RAID10 mode (normal RAID1) they should give me well over 900MB/s and with redundancy and being very cheap for what they offer. [1232206.315622] scsi 8:0:1:0: Direct-Access ATA ADATA SU800&........

  • mdadm kernel panic if trying to change --layout on a RAID10


    It is already known this is not possible mdadm --create /dev/md3 --level 10 --layout=f2 --raid-devices=2 /dev/sdc1 /dev/sdd1 mdadm: /dev/sdc1 appears to be part of a raid array: level=raid10 devices=2 ctime=Sat Dec 24 18:44:29 2016 mdadm: /dev/sdd1 appears to be part of a raid array: level=raid10 devices=2 ctime=Sat Dec 24 18:44:29 2016 Continue creating ar........

  • remove gpt partition linux


    sudo fdisk /dev/sdh WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util fdisk doesn't support GPT. Use GNU Parted. WARNING: The size of this disk is 8.0 TB (8001563221504 bytes). DOS partition table format can not be used on drives for volumes larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID partition table format (GPT). The device presents a l........

  • mdadm mirrored RAID1 performance using RAID10 -f2 (Far Layout) is the solution


    The only way I've found in mdadm to make 2 drives perform like a proper RAID 1 (eg. the read speed should be 2x that of a single drive) is to use the --layout=f2 (far 2). mdadm raid10 performance issues. Be very aware that mdadm seems to default to layout=n2 (which means near). In this scenario it means it is like mdadm RAID 1 performance (you get maximum read speeds of a single drive). dd if=/dev/md126 of=/dev/null bs=1M cou........

  • mcp55 NIC not working at boot on Centos 6.6-6.8


    forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X forcedeth 0000:00:08.0: eth0: MSI enabled forcedeth 0000:00:08.0: eth0: no link during initialization ADDRCONF(NETDEV_UP): eth0: link is not ready forcedeth 0000:00:08.0: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Dec 1 18:21:32 box15 kernel: forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. Dec 1 18:21:32 box15 kernel........

  • OpenVZ Solution CPT ERR: c02fa000,73 :CPT: lock fd is closed incorrectly: 1 and vps-net_add ERROR: Unable to add route ip route add 192.168.5.2 dev venet0


    The only solution after trying many suggestions was to simply restart the "vz" service (definitely not preferable). Even doing an ifdown and ifup for venet0 did not help. ifup venet0 Bringing up interface venet0: Configuring interface venet0: net.ipv4.conf.venet0.send_redirects = 0 RTNETLINK answers: Network is down Some errors from log: CPT ERR: d2dc60........

  • mdadm change wrong device name md127 fix and solution in Linux


    md127 issue, it should be /dev/md3 per mdadm.conf Any time something is mounted as md127 it almost always means there is no entry for this mdadm array in the mdadm.conf in initramfs (which is separate from your actual /etc/mdadm.conf). cat /etc/mdadm.conf ARRAY /dev/md3 metadata=1.2 UUID=b6722845:381cc94e:7a2c5b5f:8e3b7c4f The reason for this is something strange, most Linux OS's bizarrely always keep their own copy of /etc/mdadm.con........

  • /dev/drbd0: State change failed: (-2) Need access to UpToDate data solution


    Everytime I've seen this error "/dev/drbd0: State change failed: (-2) Need access to UpToDate data" it is because DRBD has no disk: cat /proc/drbd version: 8.3.13 (api:88/proto:86-96) GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51 0: cs:Connected ro:Secondary/Secondary ds:Diskless/Inconsistent A r----- ns:0 nr:0 dw:0 dr:0 al........

  • DRBD Slow Performance - 99.99 % [jbd2/drbd0-8] highiowait solution


    Tired of checking iotop and seeing that your drbd partition is using 99.99% of io all the time and finding your drbd device performs slow in general? This is especially an issue in versions of DRBD in the 8.3 tree in particular one documented case is on "8.3.13" but it likely applies to other devices. The symptoms are that resyncing is fine and normal but any reasonable amount of activity is very slow and lagged and creates a high server load and con........

  • How to completely remove mdadm array


    First you have to stop it. mdadm --stop /dev/md0 Then you can remove it: mdadm --remove /dev/md0........

  • mdadm zero-superblock to solve md device created on root device


    It is possible to tell mdadm to create an md device on a raw disk even though it will give you an error, it writes a superblock and this corrupts the partition table which can result in your system not booting. To fix it just zero the super-block on the offending device that you made the mistake in. Eg: /dev/sda mdadm --zero-superblock /dev/sda It is also a way of starting fresh if you wanted to create a new array.........

  • Linux How To Recover Partition Table from Kernel and Restore Centos/Debian etc..


    We've all done this at some point, you work on the wrong shell window and this was my first time making this mistake but I deleted a partition table in fdisk, recreated it and saved it with "wq" and even ran partprobe! If you haven't rebooted yet then you can still recover your partition table, otherwise you're in big trouble. Fortunately since it was a live system and in use the kernel still had to use the old table like below:........

  • OpenVZ Migration Hostnode Containers from Centos 5 to Centos 6


    migrating from an old OpenVZ (Centos 5) to new OpenVZ (Centos 6) Also if migrating from 32-bit HN to 64-bit your RAM will probably be much bigger than it should be! 16x bigger eg. 32bit HN: total used free shared buffers cached Mem:&nb........

  • Ubuntu/Debian OpenVZ Template Problems No Networking and SSH not starting


    It all comes down to a bug essentially where you are running an older kernel that doesn't support the newer Debian templates. The solution is to update your OpenVZ kernel. Here are some symptoms of the problem/lack of kernel support: Ubuntu Template 12.04 requires a manual network start: service networking start sshd will not start: /usr/sbin/sshd PRNG is not seeded mknod /dev/random c 1 8........

  • Mint/Ubuntu/Debian error twisted/test/raiser.c:4:20: fatal error: Python.h: No such file or directory #include Python.h


    Simple solution install python-dev sudo apt-get install python-dev libyaml-dev libpam-dev........

  • Nvidia Linux Card not working due to LSI 9200/SAS2008 IRQ conflict


    At first my BIOS said the card may not work right because there is no more option ROM space. I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly. But it still cannot initialize the card properly(does not work): [ 33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........

  • Linksys E2500 DD-WRT Upgrade Instructions and Enabling 5ghz with Tomato Firmware


    1.) Flash directly to this file: http://tomato.groov.pl/download/K26RT-N/build5x-132-EN/Linksys%20E-series/tomato-E2500-NVRAM60K-1.28.RT-N5x-MIPSR2-132-Max.zip *I was never able to get the larger "Mega" file to work, at least not initially so I recommend the file above. To enable 5ghz I had to do the "Clear NVRAM" Option before it was shown. 2.) Or if you don't need 5ghz (most devices do not support it and cannot........

  • Linux Mint/Ubuntu/Debian Dual NICs networks problem when enabling and disabling one device


    The Scenario You have dual NICs and you disable NIC1 which uses 192.168.1.1 as its gateway. With NIC2 you enable it/connect it to another network which also has the gateway 192.168.1.1 Everything will work fine at this point. When switching back to NIC1 even with NIC2 disabled and even unplugged, the OS basically can't pick up the new/updated ARP entry of the old device for 192.168.1.1 and perhaps thinks it is a security risk or spoof of some sorts and blocks i........

  • Errors were found while checking the disk drive for /.


    Iwill start by saying I think I know what caused this boot-time error on Linux Mint but should also apply to Debian and Ubuntu. I changed my BIOS time to several hours in the past to match the current time, but this caused Linux to think there were incorrect filesystem times. The problem is that it seems when you hit this I am not sure what is happening, it doesn't seem to be doing fsck and hangs without prompting the user. What I have found is that........

  • Debian Linux Ubuntu Mint connect to pptp from terminal bash shell


    apt-get install pptp-linux echo "yourvpnusername * yourpasspass *" >> /etc/ppp/chap-secrets vi /etc/ppp/peers/provpnaccounts.com enter (ignore the lines): ============ pty "pptp server.provpnaccounts.com --nolaunchpppd" name testuser #remotename PPTP require-mppe-128 file /etc/ppp/options.pptp ==========........

  • Is this partition table correct starting and ending partition on same cylinder?


    Device Boot Start End Blocks Id System /dev/sdc1 1 132 1060256+ fd Linux raid autodetect Partition 1 does not end on cylinder boundary. Partition 1 does not start........

  • Centos installing grub problems suspect gpt problem


    grub> root (hd0,0) root (hd0,0) Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) But if you do: root (hd1,0) setup (hd1) it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical). Checking if "/boot/grub/........

  • OpenVZ how to enable FUSE in the container


    vzctl set 2 --devnodes fuse:rw --save Where "2" is the ctid........

  • bash script Get Model and Serial Number of All Hard Disks in Server on Linux


    for disk in `fdisk -l|grep "Disk /dev"|awk '{print $2}'|sed s/://g`; do echo "$disk" && smartctl -d ata -a "$disk" -T permissive|grep -iE 'Device Model:|Serial Number:' echo "---------------" done *Make sure you have smartctl from smartmon tools installed Sample output: /dev/sdc Device Model: ........

  • mdadm real example of recovery and rebuilding of the array on Centos 6


    In this example we have 2 drives in a RAID array and /dev/sdb is the one that failed. /dev/sda1 is also the /boot partition which we tell grub to install on /dev/sdb eg install root (hd0,0) /dev/sda1 on the new drive /dev/sdb (hd1) First copy the partition table from /dev/sda to /dev/sdb dd if=/dev/sda of=/dev/sdb bs=512 count=1 Run partprobe to detect the new partition table partprobe........

  • Centos 6 how to guide convert LVM non-RAID into mdadm 1/10 RAID array live without reinstalling


    Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access. So in this case you add a second physical or disk or already ha........

  • Centos cannot login by console or ssh session closed immediately


    In my case I could login with the initial install but I rsync'd everything over while preserving ownership and permissions to another RAID partition and booted from that.was fine before. The problem is that you are kicked out the second you login and the problem was SELINUX for some reason (perhaps it noticed something strange when it was moved to the new partition) login: pam_unix(login:session): session opened for user root by LOGIN(uid=0) login: ROOT LOG........

  • Virtualbox errors on Ubuntu/Debian/Mint


    The solution was to reinstall the vbox dkms package and do a manual modprobe of the modules it makes. I never sorted out the unable to start due to the USB issue, I did have the guest additions installed but the only way to boot was to change the pointing device from USB to PS2 and then to disable the USB controller (if your pointing device is set as USB, disabling USB will not work because it will re-enable by default when it sees your pointing device is USB, this is w........

  • How To Install Linux Mint 17.2 on mdadm RAID with a separate boot partition


    Iwas surprised to see that Linux Mint at the latest 17.2 version still has NO mdadm installer option, and worse the installer will not be able to create a proper booting environment even when you do install it. How to setup mdadm in Linux mint LiveCD sudo su apt-get install mdadm # partition as you need and then create your mdadm devices # create your SWAP md0 mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /d........

  • ONVIF Linux Security Camera Setup


    First of all this seems to apply to many ONVIF devices Hard coded IP: 192.168.1.10 (yes not kidding no DHCP!) 00:12:12:9C:C2:00 To view RTSP stream use VLC, or openRTSP or other RTSP capable software: rtsp://192.168.1.10/user=admin_password=tlJwpbo6_channel=1_stream=0.sdp user: admin password: blank http://ip/Login.htm Uses Quicktime and is a poor quality picture and slow Cannot change pass........

  • Installing zoneminder on Ubuntu/Debian Linux Howto


    sudo apt-get install zoneminder [sudo] password for one: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libuser-perl python-evince kdebase-apps kwrite unixodbc libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp python-mediaprof........

  • Centos/obfsproxy errors


    I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar: yum -y install python-pip python-devel No package python-pip available. #install the EPEL repo python-pip install obfsproxy python-pip install obfsproxy -bash: python-pip: command not found pip install obfsproxy &........

  • rsync backup entire system properly


    rsync -Phaz --exclude=/dev/* --exclude=/sys/* --exclude=/proc/* --exclude=/mnt/md126 / /mnt/md126........

  • mdadm create raid10 array with only 2 drives


    mdadm --create /dev/md1 --level 10 --raid-devices=2 /dev/sdb2 /dev/sdc2 --layout=f2 --metadata=0.90 Note that layout=f2 or layout=n2 is very important as without it you'll get a complaint like this: mdadm --create /dev/md0 --level 10 --raid-devices /dev/sdb1 /dev/sdc1 missing missing mdadm: invalid number of raid devices: /dev/sdb1 It is basically more like a prop........

  • Openvz Enable netadmin


    vzctl set $CTID --devnodes net/tun:rw --capability net_admin:on --save........

  • Dell CS24-NV7 lspci dmidecode info


    0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2) 0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3) 0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3) 0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1) 0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2) 0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 0000:00:05.1 I........

  • bash script linux how to do a wildcard string comparison


    if [[ "$templatesource" == *windows* ]]; then partition=/dev/sda2 fi The * before and after * windows will match this "Ihavelotsofwindowshere" Of we could have used "windows*" and anything that starts with "windows" will be matched etc...........

  • Linux Kernel EDAC errors EDAC MC0: UE row 0, channel-a= 0 channel-b= 1 labels "-": NON-FATAL recoverable (Branch=0 DRAM-Bank=0 Buffer ID = 0 RDWR=Read RAS=0 CAS=0 NON-FATAL recoverable Err=0x800 (Non-Aliased Uncorrectable Patrol Data ECC))


    I'm not sure why I'm getting these but all memory modules are the exact same and all passed memtest successfully although they are ECC. I've heard that ECC RAM can't be tested as well and the kernel seems to indicate they are non-fatl recoverable errors. I wonder if the BIOS has aggressive RAM timing or maybe the controller or motherboard is bad. [ 12.716515] EDAC MC: Ver: 2.1.0 [ 12.717771] EDAC MC0: Giving out device to........

  • Linux disable firmware prevents NIC/Ethernet from working phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.


    [ 17.208336] tg3 0000:08:00.0: eth0: Link is up at 1000 Mbps, full duplex [ 17.210194] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX [ 76.000065] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 76.002332] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 86.736004] eth0: no IPv6 routers present [ 148.960038] phy0 -> rt2x00lib_request_fi........

  • VPN Account Buyers Guide and General Info


    What matters most about VPNproviders in 2024? We are highly suspicious of VERYLARGE VPN providers that have LOW PRICES and HUGE DISCOUNTS. The suspicion is that for those who know what costs are involved to purchase thousands of IPs and servers are not small. At the prices that many of the big mainstream providers offer, it is likely unprofitable or barely profitable. Then, how are those companies making money or is that even the goal? There use........

  • How to install grub on virtio KVM with Linux


    I messed up the bootloader by accident on a standard Centos 6.3 install because I turned the /dev/vda1 boot partition into an mdadm raid 1. This was all done correctly aside from one point Ididn't realize was an issue metadata=00.90 is the only thing that will allow you to boot (otherwise grub won't work and you won't boot). So the next step is rescue mode from a CD right? The problem you will find is that grub does not detect your hard drives, this is Ibelieve is be........

  • Vbox/Virtualbox devices grayed out for non-root user solution


    It is a permissions issue that is hard to fix. All but one USB device is greyed out. I am already a member of "vboxusers" I have already enabled and disabled USB support for the guest. I have already reinstalled the latest VBOx guest editions If running as root it all works fine Changing........

  • libguestfs tools howto guide for mounting partitions and managing virtual machine images


    libguestfs tools howto guide for managing virtual machine images. libguestfs-tools aka guestfs tools has a lot of tools that make this very easy for you. You can easily mount partitons from an image with some of the commands below. To mount a partition #mount the kvmuser102821.img image and the /dev/sda1 partition from it to the local directory "mount" guestmount -a kvmuser102821.img -m /dev/sda1 mount ........

  • NS_ERROR_FAILURE (0x80004005) The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.


    The solution is to run '/etc/init.d/vboxdrv setup' and sometimes happens when upgrading VBox and the kernel modules don't get upgraded with it. Sometimes the above doesn't work until you reboot because sometimes other unknown processes (even the file manager possibly) may be locking the old module from being unloaded. Failed to open a session for the virtual machine XP. The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.........

  • firefox android text size inconsistent large and small text size solution


    This is very annoying and also hard for web developers who want to see how things look on Android. You may be fooled into thinking you have an unclosed bracket or incompatible code but this is the "text inflation feature" which I feel should be disabled by default. It works so inconsitently that one block of text will appear small while the other will be huge and is quite annoying. The solution is simple Settings ->Display and &q........

  • Samsung Galaxy Note Upgrade/Update Experience from 4.0.4 with aftermarket ROMs


    It really seems that 4.4.4 is not ready or stable for the i717 yet and this makes sense since it takes a lot of work/development and testing to get the factory stock ROMs working well. In the end I used the 4.1.2 based Blackstra BlackJelly because it was fast, stable and just works and feels great. The aftermarket support is great but many devs are focussed on adding features and customization that most of us don't want or need rather than getting things smooth and stable.........

  • Cannot mount iPhone or iPad in Linux


    Unable to mount iPad 4 Unhandled Lockdown error (-4) This is because you need the libimobiledevice-utils package installed and a newer version of it. My older Ubuntu 10.10 uses a version that does not have "idevicepair" which seems to work perfectly and automatically with newer versions of the library. Basically if you install the above library it should be plug and play and if your imobiledevice-utils doesn't have 'idevice........

  • cp ignore symlink and copy the actual file


    This can be very tricky, say you are doing development on a file that is symlinked. Doing a "cp dev.file dev.file-bk" won't do what you expect, it just links back to the same file so you haven't copied or backed anything up. You need the "-H" switch to copy the actual file that is referenced by the symlink: cp -Hdev.file dev.file-bk........

  • SolusVM error error: Failed to create domain from /home/kvm/kvm101/kvm101.xml error: cannot open file '/dev//dev/kvmcontainer/kvm101_img': No such file or directory


    error: Failed to create domain from /home/kvm/kvm101/kvm101.xml error: cannot open file '/dev//dev/kvmcontainer/kvm101_img': No such file or directory This is caused by what we consider a quark in SolusVMthat Ihelped a client with. SolusVMhas as config for the "LVMvolume name" and does not enforce any convention. Naturally most technical people would use the actual path eg "/dev/kvmcontainer". However th........

  • drbd 8.3 hard drive failure recovery example


    drbd 8.3 hard drive failure recovery drbdadm attach r0 DRBD module version: 8.3.10 userland version: 8.3.8 you should upgrade your drbd tools! 0: Failure: (119) No valid meta-data signature found. ==> Use 'drbdadm create-md res' to initialize meta-data area. ........

  • drbd won't create device if previous partition is on it Command 'drbdmeta 0 v08 /dev/md160 internal create-md' terminated with exit code 40


    This is what fixed it: [root@box13 ~]# dd if=/dev/zero of=/dev/md160 bs=512 count=500 Basically you need to wipe out more than just the 512 byte partition table so 512 bytes * 500 is more than enough to make DRBD happy and think the partition is now empty. The reason this happens is because it gets confused when there is a previous partition with data on the device you are using. root@box13 ~]# d........

  • How to script fdisk in Linux bash


    (echo n; echo p; echo 1; echo 1; echo; echo wq) | fdisk /dev/sdb The above would make a new partition 1 on /dev/sdb and save the changes to disk, you can of course make changes to do almost anything in fdisk.........

  • LVM Tutorial how to create a Physical Volume (PV), Volume Group (vg), and a Logical Volume (LV) within it


    # first we need a physical volume which we use the pvcreate tool to create # I create mine on /dev/sdb3 pvcreate /dev/sdb3 dev_is_mpath: failed to get device for 8:19 Physical volume "/dev/sdb3" successfully created # pvdisplay shows the newly created volume pvdisplay "/dev/sdb3" is a new physical volume of "1.35 TiB" --- NEW Physical volume --- PV N........

  • Howto Convert Xen Image to KVM


    #count=10000 makes an image of 10000MB make sure your image is at least the same as your existing dd if=/dev/zero of=yourimage.img bs=1M count=10000 # losetup -fv newimage.raw # fdisk -cu /dev/loop0 # kpartx -a /dev/loop0 # dd if= of=/dev/mapper/loop0p1 # e2fsck -f /dev/mapper/loop0p1 # resize2fs /dev/mapper/loop0p1 # a lot of guides tell you to edit /etc/fst........

  • How to view GPT/EFI Windows Partition Table


    fdisk unfortunately can't do this and I'm not sure if there's any updated version that handles it but parted can do it. Here's an example of how to do it: parted /dev/sda print 1 17.4kB 1024MB 1024MB ntfs primary 2 1024MB 16144MB 15120MB ntfs primary /dev/sda1 would be the first partiton /dev/sda2 would be the second partition You can then just access them like any other normal partition.........

  • lvm how to resize and extend a volume


    lvextend -L +10G /dev/kvmvm/w2k8r2evalstandard Extending logical volume w2k8r2evalstandard to 20.00 GiB Logical volume w2k8r2evalstandard successfully resized The above adds 10GB to the logical volume. Of course you must resize the filesystem using other tools to take advantage of the space.........

  • OpenVZ mismatched kernel and dev when compiling.


    ./configure ./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory Error: kernel version not found. Please make sure your kernel is configured. dr-xr-xr-x. 4 root root 4096 Feb 21 06:13 .. lrwxrwxrwx 1 root root 45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25 drwxr-xr-x 2 root root 4096 Feb 12 20........

  • yum error installing php solution - exclude php from being installed from third party repos


    Error: Package: php-Monolog-dynamo-1.7.0-1.el6.noarch (epel) Requires: php-aws-sdk Error: php-pecl-zendopcache conflicts with 1:php-eaccelerator-0.9.6.1-1.el6.x86_64 Error: php-xcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64 Error: php-pecl-zendopcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64 Error: Package: php-horde-Horde-Vfs-2.1.2-2.el6.noarch (epel) &n........

  • What a hdd hard drive and mdadm RAID array failure looks like in Linux


    [3805108.257042] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [3805108.257052] sd 0:0:0:0: [sda] Write Protect is off [3805108.257054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [3805108.257066] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [3805108.257083] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [3805108.257090] sd 0:0:0:0: [sda] Write Protect is off........

  • Asterisk iptables block bruteforce attacks howto with fail2ban


    yum -y install fail2ban vi /etc/fail2ban/jail.conf [asterisk-tcp] enabled = true filter = asterisk action = iptables-multiport[name=asterisk-tcp, port="5060,5061", protocol=tcp] sendmail-whois[name=Asterisk, dest=you@example.com, sender=fail2ban@example.com] logpath = /var/log/asterisk/messages maxret........

  • kvm centos cannot compile error


    ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install gcc make ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install compat-gcc-* ./configure Error: Could not find alsa Make sure to have the alsa libs and headers installed. yum -y install alsa-lib-devel ./configure........

  • Linux Howto Mount CD/DVD drive for sharing for other users


    sudo mount -o user /dev/sr0 cd You need the "user"option otherwise non-root or non-owners cannot view the CD and this would make it so no anonymous access to the CD/DVD mount would work. Note that most distributions including Ubuntu DONOT work unless you manually mount and share as shown above (Icouldn't find any other way in Ubuntu).........

  • Migrate Linux Mint OS from one drive to another


    mount -o bind /proc /sda2/proc mount -o bind /dev/ /sda2/dev mount -o bind /sys /sda2/sys chroot /sda2 mint / # mount -o bind /proc /sda2/proc mint / # mount -o bind /dev/ /sda2/dev mint / # mount -o bind /sys /sda2/sys mint / # chroot /sda2 mint / # cd ~ mint ~ # ls Desktop mint ~ # cd / mint / # ls bin Desktop dev-temp home&nb........

  • mdadm: Cannot open /dev/sda1: Device or resource busy


    This was caused by some weird dmraid setup which kind of takes control of drives even if they're blank/unused. 1. Check the table. dmsetup table ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172: 0 3905945600 linear 8:0 0 ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172p3: 0 37124096 linear 253:0 284547072 ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172p2: 0 283496448 linear 253:0 1050624 ddf1_44656c6c2020202010........

  • strange kernel dmesg errors


    Sep 26 16:56:21 box kernel: 00 00 00 00 00 00 00 00 Sep 26 16:56:21 box kernel: [37007.155690] d_alias libdl-2.12.so d_count=9 d_flags=8 Sep 26 16:56:21 box kernel: [37007.155697] 09 00 00 00 08 00 00 00 9f 05 9f 05 00 00 00 00 c0 71 1d 18 04 88 ff ff 00 00 00 00 00 00 00 00 a0 7e 48 00 00 c9 ff ff 78 a9 21 18 04 88 ff ff 3a 7b fa 4e 0d 00 00 00 98 5c 2d 18 04 88 ff ff 18 5c 2d 18 04 88 ff ff 18 5c 2d 18 04 88 ff ff 00 01 10 00 00 00 ad de 00 02 20 00 00 00 ad de f8........

  • mdadm how to add additional RAID 1 drives


    This is a great way to upgrade your RAID array or move it/copy it to a new set of hard drives. Eg. you have a current RAID 1 array on older/slower drives. Just add at least 1 of the new drives to the array, update grub/install it and then boot into it. Then you have a transparent data migration that is fully synchronized. mdadm --grow /dev/md126 --raid-devices 3 md127 : active raid1 sdc1........

  • guestmount to mount a disk image


    guestmount -a yourimage.img -m /dev/sda1 --ro /mountpoint Change "yourimage.img"to the actual disk image. Change "/dev/sda1" to the device on the disk image you want to mount. --ro is specified only if you don't want write access (good to ensure you don't mess anything up if you just want to recover data).........

  • mdadm increase recovery sync/resync speed slow solution/fix


    The units in echo are kB as in kilobyte. Setting a high sync speed echo 120000 >/proc/sys/dev/raid/speed_limit_min This will increase the speed, note that sometimes a rebuild is slow due to current disk activity/iowait. If that is not the cause then you may have a hardware issue (controller, cable or a bad drive). Setting a lower sync speed echo 1200 >/proc/sys/dev/raid/speed_limit_max........

  • Unixbench Testing


    The first is a dual CPU AMD Opteron 2373EE (4 cores x 2) and I think it did bad because it has some old 250GB SATAs which can only do about 65MB/s max sequential reads. I think it should have blown away the second (AMD X4 640 Quad Core). [root@fs12home unixbench-4.1.0-wht-2]# ./Run make all make[1]: Entering directory `/root/unixbench-4.1.0-wht-2' Checking distribution of files ./pgms exists ./src exists........

  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........

  • Dell Perc 6/i SATA benchmarks without battery


    The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results. This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane. Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: N/A De........

  • Dell Perc 6/i cannot downgrade


    I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally. I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN --2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN Resolvi........

  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........

  • pxe-32 tftp open timeout


    pxe-32 tftp open timeout The solution was to enable tftp in xinetd with "chkconfig tftp on". See the troubleshooting below: chkconfig --list NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off&n........

  • screen Cannot open your terminal '/dev/pts/0' - please check. solution


    This happens when su'ing to a user and running screen screen Cannot open your terminal '/dev/pts/0' - please check. Solution (not secure for a shared server) chmod 777 -R /dev/pts ........

  • open /dev/kvm: No such file or directory failed to initialize KVM: Operation not permitted - Solution


    open /dev/kvm: No such file or directory failed to initialize KVM: Operation not permitted [ 96.084502] kvm: disabled by bios Any of the above means that "Virtualization" is not enabled in your BIOS. Most servers and Desktops (non-mainstream) can do this no problem but leave it off by default. Note that some systems even though the CPU supports it, don't allow enabling of Virtualization for some reason (especially some lap........

  • Brand new WDD 500GB Blue 3.5 SATA Drive Dead After Shipping


    These drives seem to die very easily during shipping: sd 0:0:0:0: [sda] Unhandled error code sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] CDB: Read(10): 28 00 18 8b 65 e0 00 00 08 00 end_request: I/O error, dev sda, sector 411788768 sd 0:0:0:0: [sda] Unhandled error code sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] CDB: Read(10): 28 00 18 8b........

  • mkdir: cannot create directory 'test': Disk quota exceeded - Solution


    mkdir: cannot create directory 'test': Disk quota exceeded You are out of inodes usually: df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/simfs 200000 200000 0 100% / none ........

  • Antec ECO450C Crashing


    Crashing with a RAID 1 array and when burning a CD. Screen goes blank (no video signal) and system stops responding during heavier loads. Is this a defective power supply or is it possible I have too many devices connected to the same rail? How can I verify/troubleshoot this?........

  • mdadm enable bitmap to speed up rebuilds


    Have you ever unplugged the wrong drive and then had to rebuild the entire array? It may not be a big deal in some ways but it does make your system vulnerable until the rebuild is done. Many distros often enable the "bitmap" feature and this basically keeps track of what parts need to be resynced in the case of a temporary removal of a drive from the array, this way it only needs to sync what has changed. To enable bitmap to speed up rebuilds and sync........

  • WD 20EARX 2TB Bad within days


    This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad. ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0 ata1.00: irq_stat 0x40000008 ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/00:00:........

  • init: tty (/dev/tty2) main process (1031) terminated with status 1 init: tty (/dev/tty2) main process ended, respawning


    After some fsck issues I can't boot my Centos 6.4, this just keeps repeating over and over. init: tty (/dev/tty2) main process (1031) terminated with status 1 init: tty (/dev/tty2) main process ended, respawning Disabling SELinux through Single User mode fixed this.........

  • Country List Names in HTML Select From


    This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others: Choose CountryCanadaJapanUnited StatesUnited KingdomAfghanistan........

  • How to wipe/erase hard drives clean so data cannot be recovered for privacy reasons


    This is something many people and especially businesses worry about, or at least they should. Before throwing away a hard drive, returning a hard drive, or especially Warrantying/RMAing it, you should wipe the drive. Linux provides the "shred" and "dd" utlities which work quite well. It seems even a single pass is good enough but by default shred will do 3 passes. Here's an example of using shred in Linux (I use a custom made distribution from........

  • Ubuntu/Linux disable extra Mouse Buttons Microsoft Comfort Mouse 4500


    I find it very annoying that this mouse has buttons on the side where you grip it and the left one goes back in the browser and the right one goes forward. Imagine if you're filling out a form and hit it, most forms/websites have no protection against it. Source: http://ubuntuforums.org/showthread.php?t=2065400 Here's how I fixed it with xinput, it's too bad there's no good standard GUI to........

  • mdadm create RAID 1 array example


    mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sda3 /dev/sdb3 cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb3[1] sda3[0] 1363020736 blocks super 1.2 [2/2] [UU] [=>...................] resync = 8.3% (113597440/1363020736) finish=276.2min speed=75366K/sec ........

  • SMARTCTL Enable SMART on Device Solution for Error "Device does not support SMART Error Counter logging not supported"


    smartctl -a /dev/sda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: ATA WDC WD1600YS-01S Version: 20.0 Serial number: WD-WCAP03024940 Device type: disk Local Time is: Mon Apr 29 21:40:07 2013 PDT Device does not support SMART Error Counter logging not supported........

  • eth0 changed to eth1 or eth2 and the solution to fix it


    If you move your hard drive(s) around to other computers/servers, you'll find that your eth0 keeps getting higher, the first time it will become eth1 and then eth2 etc and even higher if your server has dual or quad NICs. The reason is that udevd basically assigns eth0 tot he first NIC it finds and remembers it, if it encounters a NIC with a differentMAC, it assigns it one higher (eg. eth1). See the example below, I have eth2 now so how doI fix it?........

  • SSH Can't Login/Hang


    Client Log OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.1.253 [192.168.1.253] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_d........

  • LVM How-To Activate and Access Volumes/Data


    vgchange -ay 3 logical volume(s) in volume group "vg_12" now active lvscan inactive '/dev/vg_12/lv_root' [144.04 GB] inherit inactive '/dev/vg_12/lv_home' [1.00 GB] inherit inactive '/dev/vg_12/lv_swap' [7.85 GB] inherit........

  • Directadmin error/** Found 7 pre-existing rpmdb problem(s), 'yum check' output follows: e2fsprogs-devel-1.41.12-3.el6.i686 has missing requires of e2fsprogs-libs = ('0', '1.41.12', '3.el6') e2fsprogs-devel-1.41.12-3.el6.i686 has missing requires of l


    Solution To The Following: yum -y install zlib-devel yum -y install e2fsprogs* *** Cannot find /usr/include/et/com_err.h. (yum install libcom_err-devel) *** Installation didn't pass, halting install. Once requirements are met, run the following to continue the install: cd /usr/local/directadmin/scripts ./install.sh Common pre-install commands: http://help.directadmin.com/it........

  • mdadm recover from dead drive


    mdadm --manage /dev/md3 --add /dev/sda1 cat /proc/mdstat Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md0 : inactive sdd2[1] sdd1[2](S) 31270272 blocks md3 : active raid1 sda1[2] sdb1[1] sdc1[3](F) 943730240 blocks [2/1] [_U] [>....................]........

  • Samsung Galaxy Note I717M Canadian Version, Root and Unlock


    I chose this because I heard a lot of stories about scams and that many providers I contacted said they can't unlock the Canadian I717s (one said "my Bell server" is down). This method worked perfectly on my Bell I717M and should work for all I717 in Canada, I was able to insert a foreign SIMcard. This will work abroad too but remember entering CWM mode is different for I717's in other countries (at least theUS). Step 1 - Root + CWM........

  • Bad Hard Drive Slows Down Computer


    Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........

  • Strange SATA error code when turning on HDD/Hard drive - [1433128.139339] sd 5:0:1:0: [sde] Unhandled error code [1433128.139343] sd 5:0:1:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1433128.139348] sd 5:0:1:0: [sde] CDB: Read(10):


    [1433128.139339] sd 5:0:1:0: [sde] Unhandled error code [1433128.139343] sd 5:0:1:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1433128.139348] sd 5:0:1:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [1433128.139360] end_request: I/O error, dev sde, sector 0 [1433128.139410] sd 5:0:1:0: [sde] Unhandled error code [1433128.139414] sd 5:0:1:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1433128.139420] sd 5:0:1........

  • Samsung Galaxy Note ICS Corrupting microSDHC partition table?


    This was partitioned as a single 32GB VFAT but when I inserted it into the phone it said that it can't read it and now here is how the partition table looks. Interestingly enough the data works and reads fine from the computer still. Disk /dev/sdb1: 32.1 GB, 32085360640 bytes 64 heads, 32 sectors/track, 30598 cylinders, total 62666720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum........

  • badblocks in Linux to check/verify if a hard drive/HDD is good or bad


    I like badblocks and don't know a better more reliable way of checking the drive. If there are no errors from badblocks and dmesg doesn't produce any SATA related errors, the drive should be good (for now at least). I also prefer to do read and write mode, yes it takes ages but it is really the best way of doing it. This gives me the most confidence in knowing that a drive, especially a new one is at least OK at the moment. To test in read only mode........

  • How to install GRUB to the MBR of a disk image.


    cat | grub --device-map=/dev/null Now pay close to the attention of the beginning. Type: "device (hd0) VPS.img" this is telling what hd0 will be to GRUB and we're telling it the disk image file "VPS.img" in the current directory is hd0, you can specify alternate paths and image names of course. GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-li........

  • kvm cannot boot xen guest using lvm


    This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel. I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk. I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one). This is strange but it seems like this Xen PV guest has some sort of hidden or........

  • Nearly 100% CPU Usage from processes called dma0chan0 dma0chan1 dma0chan2 dma0chan3


    Inever started these processes but they are from a custom based bootable Linux I've made and I've never seen this behavior on other machines or even with the same machine using different kernels. These processes seemed to spawn on their own and I have no idea why and even worse why the CPU usage is so high? Here's the output from top: 907 extaudit 30 10 0 0 0 R 90.7 0.0........

  • lvm resize and use the remaining extra space


    df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_12-lv_root 50G 1.2G 46G 3% / tmpfs 7.8G 0&nb........

  • How to Encode all VOBs from a DVD/Bluray VIDEO_TS folder into an XVID


    In my case I already copied the VIDEO_TS folder to my hard drive. Here is the command for mencoder: mencoder -dvd-device "myvideobackup/VIDEO_TS" dvd:// -ovc xvid -oac mp3lame -lameopts cbr:br=128 -xvidencopts pass=2:bitrate=-700000 -o myvideobackup.avi Replace "-dvd-device myvideobackup/VIDEO_TS" with the location of your backup files or the /dev device of your DVD drive. The -o myvideobackup.avi is of course the name o........

  • mdadm: /dev/sdb1 not large enough to join array solution


    mdadm --manage /dev/md1 --add /dev/sdb1 mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. mdadm: /dev/sdb1 not large enough to join array md1's first primary member /dev/sda3 has 57394 cylinders while the /dev/sdb1 has 57393 (1 less cylinder) which is why it won't work. fdisk -l /dev/sda3 Disk /dev/sda3: 47........

  • Creating tunnel gives the error ioctl: no such device


    ip tunnel add tun3 mode gre remote 192.58.1.5 ttl 64 ioctl: no such device I solved this on Centos by loading the ip_gre module: modprobe ip_gre On Debian I believe it is the "sit" module.........

  • Samsung Galaxy Note Upgrade to ICS 4.0 microSDHC card not detected/dataloss after upgrading - possible solutions


    I backed up everything in the /mnt/sd_card directory thinking that some dataloss could occur for some reason but purposely left my microSDHC unbacked up thinking that "it won't touch that since it's external" and Samsung's and other manufacturers website even say this (that it won't be affected and not to worry etc). Apparently I was wrong, my microSD was "undetected" and asked to be formatted after the upgrade (there goes 3-months worth of family photos). No........

  • Centos how to upgrade from PHP 5.2 to 5.3 without downtime


    This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server). You may need to upgrade to PHP5.3 to run Joomla or many other reasons. Your host needs to use PHP 5.2.4 or higher to run this version of Jo........

  • xen how to resize an image properly


    The best way I could figure out is to use another guest of some sort to do this, while assigning the disk that needs to be resized to the same guest. So say we have /dev/xvda as the guests drive and we've booted it up. We also have /dev/xvdb (this is going to be the image/disk to be resized). In this case it's based on an ext3/4 image. Run e2fsck on it to ensure there are no filesystem errors. e2fsck /dev/xvdb........

  • Linux Ubuntu/Debian ATI 9902 No Sound Solution on HP G6 Pavilion Laptop


    00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01) 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device 9902 Backup your also.conf file cp /usr/share/alsa/alsa.conf /usr/share/alsa/alsa.conf.bk Change all instances of "card 0" to "card 1" (no need to manually do it, this command below does it all instantly and without fail or error:........

  • How to view an EFI GPT partition in Linux


    Disk /dev/sda: 320.0 GB, 320072933376 bytes 256 heads, 63 sectors/track, 38761 cylinders Units = cylinders of 16128 * 512 = 8257536 bytes Device Boot Start End Blocks Id System /dev/sda1 1 38........

  • mdadm how to add a device to an array after a failure


    This array is a RAID 1 and in this case 1 of the 2 drives failed (a WD drive and I've found them to be the weakest and most unreliable of any brand and are easily damaged/DOA when shipping them). mdadm --manage /dev/md0 --add /dev/sdb1 The above assumes the array you want to add to is /dev/md0 and the device we are adding is /dev/sdb1 *One thing to remember is to make sure the partition you are adding is the correct size for the array. You can also g........

  • Debian UUID not working


    Neither the blkid or the UUID internal to mdadm work to automount for some reason in Debian partprobe doesn't work but was a good suggestion from: http://pato.dudits.net/2008/11/03/special-device-uuidxxxxxxxxxxxxxxxx-does-not-exist-especially-with-lvm mount: special device /dev/disk/by-uuid/431b9b96-29e8f298-e89bd504-7065bddd does not exist mdadm -D /dev/md_d12 mdadm: metadata format 00.90 unknown, ignored. /dev/md_d12: &nb........

  • failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)


    [ 12.460014] ata1: SRST failed (errno=-16) [ 17.626677] ata1: link is slow to respond, please be patient (ready=0) [ 22.480011] ata1: SRST failed (errno=-16) [ 27.646681] ata1: link is slow to respond, please be patient (ready=0) [ 38.106817] ata1.01: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 48.266676] ata1: link is slow to respond, please be patient (ready=0)........

  • KVM QEMU and Xen how to mount disk images off-line and access data


    fdisk -lu VPS.img last_lba(): I don't know how to handle files with mode 81ed You must set cylinders. You can do this from the extra functions menu. Disk VPS.img: 0 MB, 0 bytes 255 heads, 63 sectors/track, 0 cylinders, total 0 sectors Units = sectors of 1 * 512 = 512 bytes Device Boot Start End ........

  • Skype Linux/Ubuntu Sound Echo/Distortion Poor Quality Problem Fix Solution


    This was very annoying but has a simple fix, I had an echo and the voice quality was absolutely horrible (it sounded like tin cans under water) if that helps describe it. It was extremely distorted. The simple Skype sound quality solution Go to "Options" -> "Sound Devices" Disable the "Allow Skype to automatically set my mixer levels" After doing this the sound qua........

  • Ubuntu 10 Nvidia Drivers Not Updated After Kernel Update Solution/How-To Manually Rebuild nvidia kernel modules for Ubuntu


    I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene. This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately). The most common reason may be that "linux-source" hasn't been installed automatically on my system. I tried to manually reinstall the........

  • What's Needed To Fix Linux


    I really am a Linux fan but my comments here may not show it. Although I'm quite familiar with Linux CLI to administer servers, I find Linux GUI OS's like Ubuntu at times very clunky. This is partially because there's no such thing as a "self-made" Linux from scratch where the UIwas designed by a single team. Linux is made up of several different projects that are generally completely separate and this lack of integratiion is a key issue that makes things f........

  • How To Burn ISO Image using cdrtools/dvdrtools for Linux/Unix Ubuntu/Debian/RHEL/Centos etc..


    It really is as simple as: cdrecord -v dev=/dev/sr0 pathtoyourisoimage.iso -v is for verbose, I prefer it but if you don't you won't see as much output like below (I like to know the details and exactly what's happening) dev=/dev/sr0 specifies the device name of your burner (they say not to use it and to specify some weird annoying device string but using the raw /dev has always worked for me and is how it should have been implemented from the start IMHO)........

  • screen Cannot open your terminal '/dev/pts/2' - please check.


    The solution to this screen issue is simple. This happened to me in Centos 5 as a user, but I also su'd to it and I don't have any password for it. I've read some people say this is more common when su'ing. The solution is simple though, just give others rw access to the corresponding pts whether it's 0,1,2 etc..: As root do chmod o+rw /dev/pts/2 ........

  • rpmforge: [#### ] 471/10722Segmentation fault yum[18934]: segfault at 0000000000000000 rip 00002ade62153a30 rsp 00007fff76f9fe58 error 4


    A few days ago this happened on multiple Centos 5 servers and apparently anyone using rpmforge was affected by this error and there was no solution other than disabling that repo to fix it. To some this highlighted a few points, that there is a reason RHELexists with full paid support, and also that this could be a vulnerability and huge flaw with yum. A yum search or install should not segfault just because the rpmforge repo goes down. Fortunately it came back up........

  • IO/delay and high load when a SATA hard drive dies


    dd if=/dev/sda of=/dev/null creates ever increasing load every second. After minutes the load has moved up to 4.79 I've tried with two different discs in my system. I wonder if it's a delay or problem with the SATA bus because one drive I have connected has recently failed. I notice when drives fail that you get some IO/blocking issue when they don't respond properly. Yes I believe it was, because here's the same disc after removing the dead........

  • Linux Out of Memory OOM Object Killer Solution "Out of memory: kill process 1955 (sshd) score 81 or a child"


    I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM. I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives? Also no swap space was ever used! cat /proc/s........

  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........

  • smart is not smart, it thinks a dead drive is still good


    I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior: === START OF INFORMATION SECTION === Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZ20139 Firmware Version: 50.0AB50 User Capacity: 2,000,398,934,016 bytes Device........

  • Centos Solution to "Warning: Unable to open /dev/fd0 read-write (Read-only file system). /dev/fd0 has been opened read-only."


    Warning: Unable to open /dev/fd0 read-write (Read-only file system). /dev/fd0 has been opened read-only. That's a very annoying error, it's simply because Centos for some reason thinks it's wise to load the "floppy" kernel module, who has a floppy drive? I haven't seen or used a floppy for over 12 years! It's more than just annoying, if you probe the drives attached to your system, eg. with grub or partprobe, it keeps trying to locate a flopp........

  • Openvz YUM Error Solution to "[Errno -1] Metadata file does not match checksum Trying other mirror."


    It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work. I only get this error with the openvz.repo and not others such as Centos-Base.repo With my other server it works normally: ================ Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........

  • Hitachi 2TB HDS5C3020ALA632 drive DOA


    I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead): ata1: link is slow to respond, please be patient (ready=0) ata1: softreset failed (device not ready) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: link online but device misclassified, retrying ata1: link is slow to respond, please be patient (ready=0) ata1: softreset f........

  • Mysql Solution - Timeout error occurred trying to stop MySQL Daemon. Stopping MySQL: [FAILED]


    Timeout error occurred trying to stop MySQL Daemon. Stopping MySQL: [FAILED] [root@devbox stats]# Solution (force kill mysqld - warning you do risk table corruption here but there's no choice i........

  • SPAMASSASSIN/spamcd solution - spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#2 of 3): Connection timed out


    May 6 08:16:57 devbox spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#2 of 3): Connection timed out May 6 08:17:02 devbox spamc[20214]: connect to spamd on 127.0.0.1 failed, retrying (#1 of 3): Connection timed out spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#3 of 3): Connection timed out First make sure that the spamd service is actually running, this is your spamd (spamassassin server) cannot be reached. In my c........

  • iPhone 3G/3GS/4 Undelete Photos/Videos Datarecovery


    I found this technique listed in many places which shows you how to use a common Linux tool "dd" to dump the raw partition of your iPhone. I give credit to this site for showing me the correct way to dd from the iPhone, I never thought to try it in the other direction:http://log.ijulien.com/post/182804914/iphone-3gs-data-recovery Requirements 1.) Jailbreak your........

  • SMARTCTL additional SMART command testing using short and long tests


    smartctl -t long /dev/sda (note you can specify short, but it's not as thorough as long of course). smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended sel........

  • Are my WDEARS20 Drives dying already?


    This happened during a RAID array check: SMART says both drives pass the test, but I'm doing a long test on them and hopefully this is not a hardware error. Apr 3 04:22:01 remote kernel: md: syncing RAID array md2 Apr 3 04:22:01 remote kernel: md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc. Apr 3 04:22:01 remote kernel: md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction. Apr........

  • Linux High IOWAIT updatedb can't be killed and crash with mdadm


    high IO wait 424 root 39 19 1900 848 552 D 0.0 0.0 0:00.91 updatedb root 424 0.0 0.0 1900 848 ? DN Mar11 0:00 /usr/bin/updatedb -f sysfs?rootfs?bdev?proc?cpuset?binfmt_misc?debugfs?sockfs?usbfs?pipefs?anon_inodefs?futexfs?tmpfs?inotifyfs?eventp........

  • Openvz Enable TUN/TAP OpenVPN


    Make sure the module "tun" is loaded on the host. vzctl set 2000 --devnodes net/tun:rw --save *Note what's below is what OpenVZ says you need (but I've never had to do it) vzctl exec 2000 mkdir -p /dev/net vzctl exec 2000 mknod /dev/net/tun c 10 200 vzctl exec 2000 chmod 600 /dev/net/tun On the container test the device: when Something is wrong:........

  • OpenOffice Calc SUM function not working Solution - Result is always 0/apostrophe appears in front of all numbers.


    I right clicked all applicable cells and chose "number" but that's enough. I notice when I click the cell there is an invisible ' in front of the number: '33.64 Calc imported my CSV and decided to add a ' in front of the numeric currency values!!!*Actually the problem occurs when you right click the cells and change the type from text to number, no matter what format you choose. If I change it to be currency i........

  • CPU #1 not responding - cannot use it.


    I think this will be useful to others because I have a server that kept crashing mysteriously during intense disk usage/RAID checks. It would only crash during the weekly RAID integrity check. ThenI noticed during a reboot that not all CPUs were being brought up, as a result this actually creates much higher temperatures with the output I got from sensors, just booting the system produced higher than normal temperatures. You can imagine that a full blown RAID check........

  • Openvz Disk quota exceeded inode problem with free space


    Openvz problem, it is confusing because it's an inode issue and there is enough free space. cp: cannot create regular file `forums/memberlist.php': Disk quota exceeded /dev/simfs 60G 20G 41G 33% / none 2.0G 4.0K 2.0G 1% /dev........

  • updatedb/mdadm caused a kernel panic?


    Jan 16 04:02:03 centosbox syslogd 1.4.1: restart. Jan 16 04:07:34 centosbox kernel: INFO: task updatedb:20771 blocked for more than 300 seconds. Jan 16 04:07:34 centosbox kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jan 16 04:07:34 centosbox kernel: updatedb D F78BE050 6476 20771 20766&n........

  • Ubuntu 9.04 Crash


    CPU/Kernel/MB/RAID problem? Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168] Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........

  • Installing Webmin & Enabling SSL


    Webmin Setup Centos 5: wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet [1] 24229 [2] 24230 [root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html Resolving downloads.sourceforge.net... 216.34.181.........

  • mdadm/md-check how to check array integrity without rebuilding


    This doesn't seem to be widely known (maybe it's in some documentation that none of us read though)but there's an easy way to check the integrity of any mdadm array: sudo echo check > /sys/block/md0/md/sync_action -bash: /sys/block/md0/md/sync_action: Permission denied sudo will never work, this only works as root since echo is not actually a binary/command. It is built-into bash. /sys/devices/virtu........

  • md: data-check of RAID array md3


    This really made me nervous but notice the mdstat says "check". This is because in Ubuntu there is a scheduled mdadm cronscript that runs everyday on Sunday at 00:57 that checks your entire array. This is a good way because it prevents gradual but unnoticed data corruption which Inever thought of. As long as the check completes properly you have peace of mind knowing that your data integretiy is assured and that your hard drives are functioning properly (I'........

  • WD EARS Advanced Format Can't be fixed?


    There's no partial WD EARS alignment fix: I had data on /dev/sda3 and /dev/sdb3 (RAID1) so I couldn't edit that one. I thought I'd be smart and try fixing the first two partitions so I set the first one starting at sector 2048 and then +8 for the second partition. This has really slowed the performance down worse than it ever was! Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, tot........

  • mdadm: metadata format 00.90 unknown, ignored.


    mdadm: metadata format 00.90 unknown, ignored. This happens with various versions of older mdadm such as mdadm - v2.6.7.1 - 15th October 2008 It is all because an extra 0 in 00.90 in /etc/mdadm/mdadm.conf that it doesn't like (it doesn't seem to cause any problem except that message though): Solution - Edit your /etc/mdadm/mdadm.conf and change 00.90 to 0.90 in your arrays: ARRAY /dev/md3 level=raid1 num-devices=2 metadata=0.90 UUID=f41a4644:6b2a05f........

  • Ubuntu/Debian DRBD 8.0 Setup Guide


    I've only used it on Centos, soI thought I'd make a quick Debian guide: Install the DRBD Package apt-get install drbd8-utils Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libswfdec-0.8-0 Use 'apt-get autoremove' to remove them. The following........

  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........

  • WD EARS/Green 2TB Cannot Disable Power Saving/Head Parking with hdparm


    hdparm -B 255 /dev/sdb /dev/sdb: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well). -S set standby (spindown) timeout hdparm -S 251 /dev/sda /dev/sda: setti........

  • mdadm RAID 1 adventures


    I separated the 2 drives in the RAID 1 array. 1 is the old one /dev/sda and is out of date, while the separated other one /dev/sdc was in another drive and mounted and used with more data (updated). I wonder how mdadm will handle this: usb-storage: device scan complete md: md127 stopped. md: bind md: md127: raid array is not clean -- starting background reconstruction raid1: raid set md127 active with 1 out of 2 m........

  • VirtualBox some USB passthrough devices greyed/grayed out unavailable solution


    The solution is simple but it's a wonder why VBOX doesn't address it directly? Perhaps newer versions will but you have to add your user to the "vboxusers" group and then login and logout and you'll see the devices you wanted but couldn't access are now available. The weird thing is that the grayed out issue doesn't happen with all devcies but one notable thing is the Apple iPhone especially in DFU or Recovery Mode which is an big issue for some people.........

  • mdadm won't boot due to fsck error


    Nov 29 20:17:58 ubuntu kernel: [ 1157.180789] md: md1 stopped. Nov 29 20:17:58 ubuntu kernel: [ 1157.180829] md0: unknown partition table filesystem not responding/reading properly with du or rsync (this needed an fsck). [ 2571.489217] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923106 [ 2571.942299] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923110 [ 2571.9568........

  • Ubuntu 10.04/GRUB2 mdadm won't boot


    Moving to RAID was a pain. What you have to do is the following from an existing install: Install mdadm Create your mdadm RAID 1 array on your spare hard drive. Start it with the missing disk. rsync the entire contents of your current / to the md partition. Here's a good way of doing it: rsync -Pha --exclude=/proc/* --exclude=/sys/* --exclude=/mnt/* /. /mnt/md2........

  • How to chroot properly into your OS/distro


    From a LiveCD or if you're doing something like converting your non-RAID install to mdadm here's how you would chroot properly (you have to mount your proc, sys and dev on the running system/LiveCD to your chroot environment if you want things to work right, especially if you need to run update-initramfs due to a driver change etc..) *replace "path" with your mount/chroot path mount -o bind /proc /mnt/path/proc mount -o bind /dev/ mnt/pa........

  • Revert to GRUB 0.97/1 instead of GRUB2


    had trouble trying to revert Ubuntu 10.04 LTS from grub2, won't boot mdraid and did not even install mdadm during the installation! I have tried moving back to GRUB 0.97 backed up original /boot and then copied /boot from an old Debian install. Modified device.map and menu.lst and put the appropriate kernels and initrd for Ubuntu back in /boot I ran grub: root (hd0,1) grub> setup (hd0) Checking if "/boot/grub/stage1........

  • Directadmin License Error The ip of this machine (xx.xx.xx.xx) does not match the ip in the license file.
    Check the value of your ethernet_dev=venet0:0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifco


    2010:09:09-22:22:11: The ip of this machine (xx.xx.xx.xx) does not match the ip in the license file. Check the value of your ethernet_dev=venet0:0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifconfig Solution /usr/local/directadmin/scripts/getLicense.sh........

  • DRBD WFConnection Problem/Solution


    This has stumped me a few times because I keep forgetting that Centos 5.5 comes with a default iptables configuration that ends up blocking DRBD traffic,I tried all the normal things and couldn't understand why I couldn't make my normal DRBD config work. So if you have WFConnection problems and have tried the normal "mailing list" fixes, check your firewall status first! Both Nodes Say the Following: version: 8.3.8 (api:88/prot........

  • mdadm Linux Software RAID QuickStart Guide


    Create New RAID 1 Array: First setup your partitions (make sure they are exactly the same size) In my example I have sda3 and sdb3 which are 500GB in size. mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sda3 /dev/sdb3 mdadm: array /dev/md2 started. Check Status Of The Array *Note I already have other arrays md0 and md1. You can see below that md2 is syn........

  • Installing Virtualbox on Centos 5.5


    wget http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm rpm -i http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm error: Failed dependencies: libGLU.so.1 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386 libSDL-1.2.so.0 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386 libXmu.so.6 is needed b........

  • Ubuntu 10.04 Linux is still not ready for the Desktop world


    I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD. Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer). I'll........

  • How to Enable SMART on a device


    smartctl -a -d ata -T permissive --smart=on /dev/sda -d ata is usually required for most SATA drives or you get an error. -T permissive is required if it's the first time you are running SMART on this device (it's not enough just to enable SMART in the BIOS) --smart=on is also required for the first time........

  • After installation Directadmin does not work directadmin dead but pid file exists on OpenVZ VPS when browsing http://ip.ip.ip.ip:2222


    After installation Directadmin does not work on OpenVZ VPS when browsing http://ip.ip.ip.ip:2222 service directadmin status directadmin dead but pid file exists tail /var/log/directadmin/error.log Check the value of your ethernet_dev=eth0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifconfig 2010:07:10-12:44:01: ioctl can't find........

  • md: kicking non-fresh sda1 from array! - fix/solution


    md: Autodetecting RAID arrays. md: autorun ... md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: md: kicking non-fresh sda1 from array! md: unbind md: export_rdev(sda1) raid1: raid set md0 active with 1 out of 2 mirrors The md0 raid kicked sda1 ou........

  • mdadm when a RAID 1 member dies


    [27969.398749] sd 5:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB) [27969.398749] sd 5:0:0:0: [sdb] Write Protect is off [27969.398749] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [27969.398749] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [27972.117543] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [27972.117543] ata6.00: irq_stat 0x48000000 [27972.117543] ata6.00: cmd 60/08:00:ff:7........

  • mdadm "auto-read-only" Linux Software RAID solution


    If you have the "(auto-read-only)" beside an arrayI have no idea why that happens but it is easy to fix. Just run "mdadm --readwrite /dev/md1" (rename md0 to the device with the problem and it will begin to resync. md1 : active (auto-read-only) raid1 sdb2[0] sda2[1] 19534976 blocks [2/2] [UU] resync=PENDING ........

  • Linux Burn MP3 CD On the Fly using


    I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project. Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is. I just want to a directory that had the MP3's I wanted t........

  • Realtek r8169 1gbit/1000mbit NIC/Ethernet Goes Down/Halts on Large File Transfer/Heavy Network Usage


    This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason? [655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........

  • Install Mac OS X 10.4.6 Tiger on AMD32 VMWare


    *Note OS X is strange to install, I thought my HDD was not being detected by you just have to go to Diskutil and create a partition for the root filesystem and then close/move the Window and proceed with the install. After install Mac OS X 10.4.6 Tiger I get a black screen that says: b0 error Most people say the partition has to be marked as "active", actually that just means marked as "bootable". Instead of t........

  • LUKS/cryptsetup Tutorial for Linux Hard Drive Partition Encryption


    This is based on Debian Linux but should apply equally to any *nix distro. Install LUKS/crypt-setup apt-get install cryptsetup Setup your LUKS Partition Of course change /dev/md2 with whatever partition you intend to use LUKS on. cryptsetup --verbose --verify-passphrase luksFormat /dev/md2 You'll be asked to verify your decryption password twice *DO NOT FORGET THIS PASSWORD AS IT IS NOT RECOVERABLE!........

  • Use rcconf to edit startup/init.d/init scripts on Debian/Ubuntu based distributions


    I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL. Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you. apt-get install rcconf Reading package lists... Done Building dependency tree Reading state information... Done........

  • mdadm: /dev/sda1 is too small: 0K - solution


    I was creating a RAID array and got this error: mdadm: /dev/sda1 is too small: 0K mdadm: create aborted Of course sda1 is not too small, both partitions sda1 and sdb1 are identical in size: Disk /dev/sda: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Sta........

  • mdadm can you downgrade the superblock?


    Why would you want to downgrade the superblock? Old mdadm verisons like mdadm 2.5.6 only use the 0.90 superblock/metadata and new versions use 1,1.0,1.1 and 1.2 superblocks by default. There are some annoying caveats with this, first of all the new superblocks (later than 0.90) CANNOT be read by GRUB, so you won't even be able to install GRUB. Even worse, old versions of mdadm CANNOT automatically detect arrays even if they were created with a new version of mdadm with th........

  • rsync skipping non-regular file


    skipping non-regular file "mnt/lib/udev/devices/console" skipping non-regular file "mnt/lib/udev/devices/kmem" skipping non-regular file "mnt/lib/udev/devices/loop0" skipping non-regular file "mnt/lib/udev/devices/null" skipping non-regular file "mnt/lib/udev/devices/ppp" skipping non-regular file "mnt/lib/udev/devices/net/tu Solution for skipping non-regular file You need the -D........

  • Why does mdadm have two sets of UUID's?


    Which one does the OS care about? blkid says the UUID is "787f1fa4-b010-4d77-a010-795b42884f56" while md insists its UUID is "4d96dd3b:deb5d555:7adb93cb:ce9182d9" When in doubt, do we assume the OS takes the one from blkid? /dev/md0: UUID="787f1fa4-b010-4d77-a010-795b42884f56" TYPE="ext3" [root@localhost ~]# mdadm -D /dev/md0 /dev/md0: Version : 0.90 &........

  • mdadm force/fix proper md127 name


    I have an md0 arary that my Centos install refers to. I feel this is half the reason why it won't boot anymore. I saw the initrd for Centos was assembling it as md127 even though it was known as md0. The reason for this is because I used mdadm --assemble --scan to detect the array on a LiveCD. I had no idea this name would stick (but now I realize the name is permanently stored in the metadata once you mount md127 or whatever random name assemble gives it). W........

  • Debian 5.04 RAID 1 mdadm boot problem GRUB error


    I successfully created a single RAID 1 partition which includes /boot inside it and my root directory through the Debian installer. It said GRUB installed successfully but when I try booting the OS it seems GRUB can't read anything. When trying to boot from GRUB GRUB Loading stage 1.5. GRUB loading, please wait... Error 2 I get "Error 2" when trying to boot Debian. I also notice from a LiveCD that........

  • Centos 5.5 RAID 1 boot issue


    I installed 5.5 with a 300GB RAID 1 partition (boot is also on this partition). It booted up fine the first few times until after I used a Live CD and accessed the array, and it became named /dev/md127 for some reason. Now whenI boot into CentOS I get a kernel panic and different errors, once I got "invalid superblock", even though the array is fine (it didn't happen again, probably because I was sure to dismount and stop the mdadm array properly). Here's what........

  • Compile PHP 5.3.2 on Centos 5 and CPanel/WHM because of error - Fatal error: Call to > undefined function imagecreatefromjpeg()


    This function and others may not work with the stock PHPinstall on Centos/CPanel: Fatal error: Call to > undefined function imagecreatefromjpeg() Even with libjpeg-devel installed it won't work because PHP was not compiled with jpeg support, so we have to do the dirty work ourselves :) Here is the command/yum's I did to install missing libraries for PHP that configure will complain about (yes it is a one by one process). yum install bzip2-........

  • Unixbench Score on Core i5 750 with OpenVZ Kernel vs Xen/Openvz


    This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel. OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!) # # # # # #&n........

  • chroot into an off-line Linux version using a LiveCD/USB


    It's not just as simple as running the chroot command, you need to ensure the /proc and /dev entries are passed through and populated to the chroot environment. Step 1 - Mount Your Off-lineOS mount /dev/sda1 /mnt Step 2 - Mount Proc mount -t proc none /mnt/proc Step 3 - Mount Dev Most guides will tell you to use this: mount -o bind /dev /mnt//dev but that doesn't work for some reason in many cases: mount: wron........

  • mdadm Linux Software RAID auto-detect and assemble RAID Array


    mdadm --assemble --scan mdadm: /dev/md/diaghost05102010:2 has been started with 2 drives. mdadm: /dev/md/diaghost05102010:1 has been started with 2 drives. mdadm: /dev/md/diaghost05102010:0 has been started with 2 drives. -bash-3.1# cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] [multipath] md125 : active raid1 sda1[0] sdb1[1] 14658185 blocks super 1.2........

  • rsync my favorite/best/optimal default switches and options


    Not sure what rsync switches/options to use? rsync -PDrphogtl The short version would be: rsync -Pha I think these are really common sense options to use and probaby should be the default. Explanation of rsync switches P = display the progress D = hybrid of --specials and --devices so all special and device files will be copied as well. r = recursive (otherwise rsync won't copy files deeper than........

  • Seagate Drive 500GB Drive Dying


    This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART. Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device........

  • Seagate 7200.11 firmware defect in 500GB, 1000GB (1TB) and 1500GB (1.5TB) Hard Drives


    Seagate Inventory/Firmware Check I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate. *Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate! Seagate Inventory/Firm........

  • Linux AHCI Hotswap Tips - Remember To Reread The Partition Table WITHOUT rebooting


    From the package "parted" you can use the command "partprobe" to re-read the partition table. I really hate rebooting, and that's what Iloved to hear about AHCI motherboards, that they allow hotswap so you don't have to reboot. But that's only as good as the OS, if the OS does not reload the partition table you won't be able to do anything with that new drive you attached without rebooting. Yes, even without re-reading the partiton table Linux will........

  • nginx - the ultimate load balancer


    You can find it for free at http://nginx.org/ I find nginx is simpler to setup than pound (it's not hard but I found it unintuitive and annoying), it seemed to make some basic setups overly complicated with the config file syntax. nginx on the other hand is perfectly suited in everyway, it is even simpler to setup and seems to be the most stable and most efficient any load balancer. I would go as far as to say that a good nginx setup is more relia........

  • Convert HDD/Hard Drive Partition(s) into non-RAID into RAID 1 using existing data without data loss and without reformatting.


    Before we start I take no responsibility for this, you should have a backup and if you make a mistake during this process you could wipe out all of your data. So backup somewhere else before starting this as a precaution, or make sure it's data you could afford to lose. The RAID 1 Setup (Hardware Wise) I've already setup my 2 x 1TB (Seagate) drives with identical partitions, make sure your new hard drive (the empty one) is setup like your curr........

  • Linux EXT3 16GB-17GB maximum filesize issue solved/how to fix


    I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB! I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition. Here is what tune2fs tol........

  • Picking an FTPD (vsftpd) Server in Linux Centos/Debian


    I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find. yum search ftp Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: ftp-stud.fht-esslingen.de * base: mirrors.netdna.com * updates: updates.interworx.info * addons: yum.singlehop.com * extras: mirrors.netdna.com rpmforge........

  • ntfs-3g Error/Fix/Solution - Unexpected sectors per cluster value (127). Failed to mount '/dev/sda1': Invalid argument The device '/dev/sda1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a


    ./ntfs-3g /dev/sda1 /mnt -o force Unexpected sectors per cluster value (127). Failed to mount '/dev/sda1': Invalid argument The device '/dev/sda1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? This is happening on a system I've come across an HP 6930P running Windows XP Professional. The partition appears to be very norm........

  • Codelite C++ IDE is a Cross Platform Unix/Linux (Mac OS, Ubuntu etc..) and Windows for C++ development


    Codelite is a great choice and I intend on getting back into C++ development and I think Codelite is great being cross platform. It looks like it was designed with a lot of thought and should do the job better. I really dislike the bloated and confusing IDE's from big companies like Microsoft where you usually have to use .NET and other useless technologies that just give Microsoft the advantage over you, the programmer, and the users.........

  • Compaq V2405CA Laptop - Unixbench Performance Test


    Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics. # # # # # # # ##### ###### # # #### # # # # ## # # # #&nb........

  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........

  • Clone any OS partition perfectly


    Clone any OS partition perfectlyIn one box I needed to copy the boot partition to another disk while retaining the MBR and other data. I simply ran this command: [code:1:1b1ff110ca]dd if=/dev/hda1 of=/dev/hdb1[/code:1:1b1ff110ca] [b:1b1ff110ca]if[/b:1b1ff110ca] = source patition [b:1b1ff110ca]of[/b:1b1ff110ca] = destination partition Here's an interesting article on it http://www.rajeevnet.com/hacks_hints/os_cl........

  • Mount Linux ext2 file system


    Mount Linux ext2 file systemNormally in Linux you could mount ext2 or ext3 etc... like this: mount -t ext2 /dev/hda1 /mnt/hda1/ In FreeBSD the difference is of course the disk naming conventions (hda1 would be known a /dev/ad0s1): To mount ext2 in FreeBSD just type: mount -t ext2[b:68c16c60bf]fs[/b:68c16c60bf] /dev/ad0s1 /mnt/ad0s1........

  • Live E-mail Verfication


    Live E-mail VerficationTwo very cool tutorials that actually connect to the supposed mail server of whatever address the user specifies to see if the e-mail address actually exists. http://www.devshed.com/c/a/PHP/Email-Address-Verification-with-PHP/ http://www.zend.com/zend/spotlight/ev12apr.php?article=ev12apr&kind=sl&id=1782&open=1&anc=0&view=1#notes........

  • Centos 4.3 x64 & VMWare Server Beta


    Centos 4.3 x64 & VMWare Server Beta[code:1:6d0b2c8c2f] The correct version of one or more libraries needed to run VMware Server may be missing. This is the output of ldd /usr/bin/vmware: linux-gate.so.1 => (0xffffe000) libm.so.6 => /lib/tls/libm.so.6 (0xf7fbd000) libdl.so.2 => /lib/libdl.so.2 (0xf7fb9000) libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fa7000) libX11.so.6 => not f........

  • /usr/bin/ld: cannot open crt1.o: No such file or directory


    /usr/bin/ld: cannot open crt1.o: No such file or directory[quote:812bec9db7]/usr/bin/ld: cannot open crt1.o: No such file or directory collect2: ld returned 1 exit status[/quote:812bec9db7] This is annoying and in my case it happened on Centos AMD 64 when compiling a 32bit program with GCC. Install glibc-devel.i386 (make sure you get the i386 version and not the native 64 bit version which is likely already installed). The joys of 3........

  • The New Chips on the Block


    The New Chips on the BlockThe New Chips on the Block By Bruce Gain Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html 02:00 AM Jun. 13, 2005 PT We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........

  • Intel's Finnish Fetish


    Intel's Finnish FetishIntel's Finnish Fetish By Dave Mock June 13, 2005 Chipmaker Intel (NASDAQ: INTC) has successfully topped the personal computer market for decades. Breaking into related areas such as communications has been much difficult for the world's largest semiconductor maker. But a new partnership with Nokia (NYSE: NOK) could help to change that. Intel's forays into cellular-phone and home-entertaiment-device chips have........

  • MySQL Reserved Words


    MySQL Reserved Wordshttp://dev.mysql.com/doc/mysql/en/reserved-words.html You should familiarize yourself with these because you will have unexpected results if you use any of them. Eg. try creating a table with what you think is valid syntax like this: CREATE Table Order( .......); The word 'Order' is a reserved word and used to ORDER the results so you will get a syntax error from this one and you would think everything is........

  • Mounting NTFS in Unix


    Mounting NTFS in UnixJust a quick tutorial to mount your NTFS volumes in Unix (FreeBSD/Linux) [quote:4a9de7bf80]mount -t ntfs -o umask=0 /dev/your_partition /mnt/your_mount_point[/quote:4a9de7bf80] [b:4a9de7bf80]-o umask=0[/b:4a9de7bf80] is to ensure all users can access the mounted partition (otherwise don't use it and only root can access the mounted partition) [b:4a9de7bf80]-t ntfs[/b:4a9de7bf80] is simple because it just lets mount kno........

  • MySQL SubQuery


    MySQL SubQueryI was trying to do a sub-query here but it wouldn't work (Syntax Error) in MySQL for some reason even though based on the SQL standards it should be ok. [i:1268bfa39e][b:1268bfa39e]I found the reason this doesn't work. I am using MySQL 3.23 and I read on the MySQL web site that versions before 4.1 DO NOT SUPPORT SUB-QUERIES so it showed me how to rewrite the following as a LEFT join instead of a sub-query. [/b:1268bfa39e][/i:1268bfa39e]........

  • sed is great for pattern matching or retrieving lines


    sed is great for pattern matching or retrieving linesHere is a cool example Say you type df: The output would be something like: [quote:3bb8d51437]Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda2 1712432 1206664 418780 75% / /dev/hda1 31201 10505 19085 36% /boot none 30932 0 30932 0% /dev/shm [/quote:3bb8d51........

  • Clustering Links


    Clustering LinksI thought this might be interesting for people with spare time. [b:6423c19973]Great clustering article from Linux Mag[/b:6423c19973] http://www.linux-mag.com/2003-11/clusters_01.html [b:6423c19973]General Linux cluster information[/b:6423c19973] http://www.gdargaud.net/Hack/ClusterNotes.html#HighA http://www.faqs.org/docs/Linux-HOWTO/Cluster-HOWTO.html#s3 http://www.yolinux.com/TUTORIALS/LinuxClustersAndFileSys........

  • InnoDB is a free installer for Windows based systems


    InnoSetup is something Ijust realized many commercial developers use for installation. Why? Because it's100% FREE, simple, and efficient to use. The maker has really done a great job and the installer basically works on all versions of Windows since 95. I'll keep this in mind the next time I code a Windows application since it's been years for me.........

  • gnuCash - Alternative to Quickbooks/Quicken and other COTS accounting software.


    gnuCash is available for all main platforms, Linux/Unix, MacOS (FreeBSD anyway), and Windows. You can download gnuCash free from here. It does seem to be fairly full featured and somewhat straight forward, but like so many programs it is missing a few key features or things don't work quite right. It doesn't support importation of CSV files, which is a big minus. And the developers rather than wanting to add support have just dec........

  • How to Track Down/Find Cause of Linux high disk iowait/wa


    top - 09:34:12 up 2 days, 20:57, 2 users, load average: 1.83, 1.99, 2.03 Tasks: 59 total, 2 running, 57 sleeping, 0 stopped, 0 zombie Cpu(s): 0.3%us, 0.0%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st That 99.7% wa is iowait, it means the server is waiting for a process to complete an IOoperation or in plain English, there is a delay in........

  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon - Updated with GlusterFS 2.0.8


    You might remember my original GluserFS/OpenVZ benchmark which produced a horrible 29.8 This is the exact same system, but using the latest 2.0.8 (with some small files patch which speeds up performance) you can see it is about 25% faster. I also haven't tuned my config files at all, but there are some settings that should increase performance on small files which I believe i........

  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon


    This is very disappointing since GlusterFS markets itself as a solution to deploy VPS servers on. On the HNitself I get a Unixbench of about 360. I'm also using an SSH tunnel to secure the communications, but even before that, things seemed very slow. # # # # # # # #####&n........

  • sudo: Error dropping capabilities, aborting in Linux Centos 5.3


    For some reason Ikeep getting this error when trying to run a sudo command eg: sudo -u someuser somecommand sudo: Error dropping capabilities, aborting My version of sudo is:sudo-1.6.9p17-3.el5_3.1 and I've heard that version 1.7 fixes everything. The only thing is yum does not think sudo has any update. Iguess the new version has not been committed to the RPM repository yet. This is really a huge and ann........

  • OpenVZ/Virtuozzo Enable Fuse in Container


    To enable Fuse to work inside a OpenVZ container it's very simple (although some people say it can't be done). Remember that on your HN(HostNode) for OpenVZ, Fuse must be installed and the module must be loaded for this to work. In addition remember that you need the Fuse package installed inside the container of course. vzctl set 2000 --devices c:10:229:rw --save vzctl exec 2000 mknod /dev/fuse c 10 229 The part that most people forget........

  • Unlocked iPhone 3GS and firwmare 3.0 battery short low life horrible


    This is pretty bad, ever since my phone has been unlocked the battery life is horrible. Many others have reported this issue on provider unlocked phones and even jail broken phones. We're talking issues as bad as losing 1% every 3 minutes which is what I seem to have observed as well. For now I'm going to relock the phone, and hopefully a firmware update will address this issue. This is very annoying and it seems apparent this is also happening on 3G phones and that........

  • Why Apple should thank the jailbreakers and not patch/stop the jailbreaking exploits


    First of all, the iPhone is crippled in many ways, but most of my complaints about functionality have been addressed through the jailbreak, Ican run apps in the background of my choosing, I can install a terminal, acccess my phone through SSH and SCP and so much more. It even addresses the 15 minute e-mail problem, I installed a program called "PushMod" and now set the checking time to just 1 minute. Apple should really thank the developers for this gift, it ma........

  • iPhone 3GS Jailbreak Information & Benefits


    Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore. A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly. In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........

  • iPhone Safari Browser and TinyMCE Support


    This is unfortunate and frustrating as many sites use it, a lot of people are frustrated that TinyMCE does not work on the iPhone Safari browser. Apparently the developer of TinyMCE's answer is "talk to Apple about it" It's really frustrating although, I wonder if any other mobile phones are able to use TinyMCE or not, whatever the case is it would be nice to find a solution to use TinyMCE on the........

  • Using a Mac OSX DMG Image in Windows and Converting to Standard ISO Format use dmg2iso


    The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso I'll only cover theLinux version although the Windows pre-built binary works the same way. Download dmg2iso here for free (from the author's website) It's just silly and doesn't make sense that Ubuntu doe........

  • Apple iPhone 3GS and predecessors are leading a revolution


    As much of a computer nerd as Iam, I'm usually a late adopter to technology for a few reasons. Ifeel most new hyped technologies and electronics are mainly fads, and I'm also cheap. Adopting later means you avoid the bugs, kinks and most importantly pay the lowest price, that's me being cheap again :) I never read much about the iPhone but Isaw all the hype around it and until recently I wasn't a big fan of anything Apple until a few years ago I realize........

  • SSH Server Slow/Lagged/Delayed Login Response


    This is really something the SSHServer developers should consider. The cause of this annoyance is because of failed DNS lookups on your IPaddress, which is especially common for many dedicated/col-located servers and also computers on internal NAT/private networks. The chances are this is the cause of your SSHSlow/Delayed Login problems. The easy solution to SSH Login Problems Edit /etc/ssh/sshd_config Add this line to disable r........

  • SIOCSIFADDR No such device eth0 error while getting interface flags - eth0 Ethernet Device can


    Igot this after copying a VMWare image onto another machine in Debian. SIOCSIFADDR No such device eth0 error while getting interface flags The solution 1.) Find and edit the device line in persisent-net.rules note it will be prefixed with something like z25 or something else. vi /etc/udev/rules.d/z25_persistent-net.rules The easiest way is to comment anything out. If you are feeling........

  • OCFS2 crash


    When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it. More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things. Output of /var/log/messages for OCFS2 Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........

  • Configuring OCFS2 Clustered File System on Debian Based Linux including Ubuntu and Kubuntu


    There's a lot of information and guides on OCFS2 for RHELand Centos Linux but the package setup and configuration is slightly different and this has thrown some people off. Installing OC2FS You should install the following packages to get started: apt-get install ocfs2-tools ocfs2console Configure OC2FS In RHEL/Centos the main configuration file is located in /etc/sysconfig/o2cb However in Debian based Linux it is located........

  • Writing/Burning a data CD-R/DVD-R or DVD+RW in Unix/Linux


    There's a lot of outdated information and confusion for system administrator's out there. One annoying task for many an Administrator has been backing up data in Linux. You don't need any GUI tools such as K3B or GnomeBaker. Both are excellent tools but for veteran command line users working remotely, using the keyboard is a great and possibly automated way to save yourself pain and hassle. At a later date we'll cover how scripting can automatically backup certain........

    • Latest Articles

  • How high can a Xeon CPU get?
  • bash fix PATH environment variable "command not found" solution
  • Ubuntu Linux Mint Debian Redhat Youtube Cannot Play HD or 4K videos, dropped frames or high CPU usage with Nvidia or AMD Driver
  • hostapd example configuration for high speed AC on 5GHz using WPA2
  • hostapd how to enable and use WPS to connect wireless devices like printers
  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730
  • Cloned VM/Server/Computer in Linux won't boot and goes to initramfs busybox Solution
  • How To Add Windows 7 8 10 11 to GRUB Boot List Dual Booting
  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile
  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial
  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif
  • Linux Debian Mint Ubuntu Bridge br0 gets random IP
  • redis requirements
  • How to kill a docker swarm
  • docker swarm silly issues
  • isc-dhcp-server dhcpd how to get longer lease
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian
  • zfs and LUKS how to recover in Linux
  • [error] (28)No space left on device: Cannot create SSLMutex Apache Solution Linux CentOS Ubuntu Debian Mint
    • Copyright © realtechtalk.com 2024