• bash fix PATH environment variable "command not found" solution


    If you are sure the binary/program exists, it could be that your PATH variable is broken or not set. Just do this to set most of the common paths: export PATH=$PATH:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin There's no risk to the above, because it just takes your current PATH variable and adds more to what is already existing. To make this permanent you can add this to your ~/.bashrc file........

  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730


    This is certainly a poor design, as you can read many seasoned admins who have updated their iDRAC only to have it killed. One possible cause is not by doing all the incremental updates, doing updates from an old iDRAC to one many revisions newer is a sure way to kill things, but even then there is no guarantee based on the amount of failures. List of threads of people's dead iDRAC's:........

  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile


    This guide assumes you have a working Postfix server and want it to sign with DKIM. There are a few things we have to understand to make all of this work though, which require you to be familiar with DNS as well. 1.) Install OpenDKIM apt install opendkim systemctl enable opendkim 2.) Edit /etc/opendkim.conf Syslog yes SyslogSuccess yes Mode&nbs........

  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.


    This sometimes happens when trying to install the EFIversion of grub to a device when you are booted into Legacy/MBR mode. It doesn't seem to occur on all machines, but some and seems somewhat BIOS dependent. grub-install --target=x86_64-efi /dev/sda Installing for x86_64-efi platform. grub-install.real: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image.. grub-install.real: warning: Couldn't find physica........

  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif


    [Wed Nov 01 18:47:08 2023] [error] Unable to configure verify locations for client authentication [Wed Nov 01 18:47:08 2023] [error] SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line [Wed Nov 01 18:47:08 2023] [error] SSL Library Error: 185090057 error:0B084009:x509 certificate routines:X509_load_cert_crl_file:PEM lib It actually gives us a good clue that at last one component of our cert is invalid/improperl........

  • Linux Debian Mint Ubuntu Bridge br0 gets random IP


    This can break things easily in remove environments where it was normally easy to convert a normal eth0 to a bridge under br0, and that bridge would normally have the same MAC address by default, which is desirable for most situations. In Debian 11 this is different for some reason now. https://unix.stackexchange.com/questions/681013/bridge-gets-random-mac-........

  • How to kill a docker swarm


    Assign way more replicas than you have of memory on all nodes and watch the Swarm crash which can easily reproduce in a small VMfor testing. root@Deb11Docker01:~# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAM........

  • isc-dhcp-server dhcpd how to get longer lease


    You can do a static lease that is tied to the MAC address but what a lot of users prefer is that they come into the office or lab the next day and that their device gets assigned the same IP address (if possible). As we can see in the dhcpd logs that there is threshold that is defaulted as we'll show later. Whatever the threshold is set at, if the lease is younger than the threshold, it will keep the same lease. In other words, if the device goes to sleep or is powered off........

  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian


    This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525. Then nvidia-modeset goes to 100% There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines. https://forums.de........

  • zfs and LUKS how to recover in Linux


    Sometimes users take their removal drives and unplug and replug them to test what happens during the failure of a disk. However, this breaks things quite badly due to the /dev/mapper in LUKS not coming back online due to it not being closed. In other words, generally with non-encrypted drives the process is smooth but when encrypted you may want to follow a strategy like this: We can see below that both disks are unavailable as they were physically remov........

  • Save money on bandwidth by disabling reflective rpc queries in Linux CentOS RHEL Ubuntu Debian


    Even today we see a lot of servers that have different services and ports open for rpc and this creates not only potential inward vulnerabilities but perhaps more common, the abuse of your network resources in reflective rpc queries. To stop this problem, you should disable and remove all services relating to rpc or at least block all relevant ports for the service. Surprisingly, there are still some providers and OS installs in Linux that install these services and leave them........

  • docker error not supported as upperdir failed to start daemon: error initializing graphdriver: driver not supported


    Nov 15 17:00:49 rttbox kernel: overlayfs: filesystem on '/var/lib/docker/overlay2/check-overlayfs-support450709549/upper' not supported as upperdir Nov 15 17:00:49 rttbox dockerd[93755]: failed to start daemon: error initializing graphdriver: driver not supported The above error is often/normally caused because you are trying to run docker out of an unsuitable directory/filesystem. For example if you try to place docker's data inside an existing overl........

  • Migrated Linux Ubuntu Mint not starting services due to broken /var/run and dbus - Failed to connect to bus: No such file or directory solution


    This is a weird issue as sometimes when upgrading or even migrating, this could happen and the reason is simple but maybe not 100% obvious at first. You will find that your GUIdoesn't load and most services fail to start, even logind Here are some errors you may see: Mar 13 22:22:23 rttbox systemd-logind[2892]: Failed to connect to system bus: No such file or directory Mar 13 22:22:23 rttbox systemd-logind........

  • File "/usr/local/lib/python3.5/dist-packages/pip/_internal/utils/entrypoints.py", line 12 f"pip{sys.version_info.major}", ^ SyntaxError: invalid syntax python pip3 error solution


    Is python3-pip pip3 not working anymore? Traceback (most recent call last): File "/usr/bin/pip3", line 11, in sys.exit(main()) File "/usr/local/lib/python3.5/dist-packages/pip/__init__.py", line 11, in main from pip._internal.utils.entrypoints import _wrapper File "/usr/local/lib/python3.5/dist-packages/pip/_interna........

  • Docker Swarm vs Kubernetes Comparison Guide


    A lot of companies are unsure which solution to choose and many may not be aware of Docker Swarm as an alternative to Kubernetes. One thing that many Sysadmins find is that Docker Swarm is simply easier, quicker to setup and maintain by far than Kubernetes.........

  • When is it time to leave your VPS/VDS Cloud Hosting Provider?


    When Is It Time to Leave Your VPS, VDS, and Dedicated Server Provider? Choosing the right hosting solution—be it Virtu........

  • 2024 Buyer's Guide: How to Choose and Buy the Best VPS/VDS for Your Needs - Tips and Strategies


    In today’s digital landscape, finding a reliable and secure Virtual Private Server (VPS) or Virtual Dedicated Server (VDS) goes beyond just comparing specs and prices. With increasing concerns over data privacy, security breaches, and government surveillance, the wisdom of choosing your VPS/VDS provider based on juri........

  • Postfix / sendmail config for DKIM, SPF and DMARC Tutorial Guide E-mail Delivery for Hotmail.com Gmail.com and More HowTo


    This will be the goto to help solve e-mail delivery issues and talk about many practical issues that happen between developers, admins and scripts that send e-mail and do things that may not be acceptable or cause deliverability problems. Sendmail Stuff Edit /etc/mail/sendmail.mc The problem is that if you send directly out from the server using the mail function, the Return-path of the e-mails will be username@thehostnameoftheserver.com. Let........

  • Mint Ubuntu Linux Gnome Showing Home Directory on Desktop instead of Desktop Directory


    During a migration or other custom setup, it's possible you don't have a $HOME/Desktop and as a result the config file that controls this is set to just use your $HOME directory. This is controlled in the file: $HOME/.config/user-dirs.dirs As we can see below, Desktop, Downloads, Music and Pictures are set to $HOME. We can edit any of these as we like. # This file is written by xdg-user-dirs-update # If you want........

  • Linux how to get list of all timezones on system Ubuntu


    find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV" Africa/Addis_Ababa Africa/Abidjan Africa/Blantyre Africa/Lusaka Africa/Casablanca Africa/Libreville Africa/Asmara Africa/Bujumbura Africa/Dakar Africa/Lagos Africa/Malabo Africa/Harare Africa/Kigali........

  • How To Upgrade Debian 8,9,10 to Debian 12 Bookworm


    Step 1.) Upgrade to Debian 11 first The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful. Step 2.) Update sources.list Update your /etc/apt/sources.list like this: deb http://........

  • apache2 httpd apache server will not start [pid 22449:tid 139972160445760] AH00052: child pid 23248 exit signal Aborted (6) solution Mint Debian Ubuntu Redhat


    If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing. The above results in this less than obv........

  • How to use the FTDI USB serial cable to RJ45 adapter to connect to the console on Cisco/Juniper Switch Router Firewall in Linux Ubuntu Debian Redhat


    This should work for most console ports of other manufacturers too. It is a quick and simple method for emegencies or deploying a few appliances/devices in a non-standard environment or small environment. However, if this is a route thing, or the equipment is not physically close to you, it would be best to use some sort of "Terminal" server which is an IP connected switch with several serial ports built-in for this purpose. Normally they accessible by web/........

  • How To Setup Python3 in Ubuntu Docker Image for AI Deep Learning


    The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself. I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all. docker run -it --runtime=nvidia --gpus all ubuntu bash These works for most images li........

  • How to Configure NVIDIA GPUs with Docker on Ubuntu: A Comprehensive Guide for AI Deep Learning CUDA Solution


    Welcome to our in-depth guide on configuring NVIDIA GPUs with Docker on Ubuntu. This post is tailored for developers, data scientists, and IT professionals who are looking to leverage the power of NVIDIA's GPU acceleration within Docker containers. Whether you're working on machine lea........

  • Linux Ubuntu Mint how to check nameservers when /etc/resolv.conf disabled solution


    You'll notice that /etc/resolv.conf contains dire warners on most Linux Desktops. # This file is managed by man:systemd-resolved(8). Do not edit. # # This is a dynamic resolv.conf file for connecting local clients to the # internal DNS stub resolver of systemd-resolved. This file lists all # configured search domains. # # Run "resolvectl status" to see details about the uplink DNS servers # currently in use........

  • Docker cannot work on other overlayfs filesystems such as ecryptfs won't start overlayfs: filesystem on '/home/docker/overlay2/check-overlayfs-support130645871/upper' not supported as upperdir


    This does not seem to be officially documented but makes sense that an overlay on an overlay does not work and is considered an unsupported filesystem as is even NTFS . Some admins/organizations try to use ecyptfs as a simple solution to encrypt the contents of Docker. Instead, you could probably........

  • Linux How To Upgrade To The Latest Kernel Debian Mint Ubuntu


    How to check what kernel version you have/currently running? uname -rm 5.4.0-91-generic x86_64 The above shows us that we are running 5.4.0-91-generic on the x86_64 architecture. The safest way is to stick with the same flavor eg if you're on generic, and say on kernel 5.4.0 then it makes sense to follow what is below. However, if you are migrating or dual booting between newer hardware (eg. you got a........

  • bash: apt-add-repository: command not found solved solution fix


    Getting this error "bash: apt-add-repository: command not found"? You need to install the software-properties-common to solve the error: sudo apt-get install software-properties-common........

  • How to upgrade to the latest Python version on Linux Ubuntu Debian Mint 3.11


    A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version. Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended): Step 1 - Add the repo apt-add-repository ppa:deadsnakes/ppa If you get an error about requests then install it:........

  • python3 error Ubuntu Linux error solution SyntaxError: invalid syntax line 12 pip{sys.version_info.major}


    This sort of thing normally happens your python3 or pip3 has been updated, because you have to in order to use pip, but the newer pip now breaks compatibility with your old python (3.5 in this case). There are a few solutions, the easiest is perhaps to upgrade to a newer OS with a newer distro provided Python 3 or to manually install a newer version of Python/OR use a PPA like deadsnakes that provides newer versions. ........

  • How to install and configure haproxy on Linux Ubuntu Debian


    haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx. haproxy is used by many large sites per Wikipedia: HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........

  • talib/_ta_lib.c:747:10: fatal error: ta-lib/ta_defs.h: No such file or directory


    If you are installing ta-lib for Python and get this error then you can normally solve it by manually getting the ta-lib source files and compiling. tar -zxvf ta-lib-0.4.0-src.tar.gz cd ta-lib;./configure;make;make install Collecting ta-lib Downloading https://files.pythonhosted.org/packages/39/6f/6acaee2eac6afb2cc6a2adcb294080577f9983fbd2726395b9047c4e13ec/TA-Lib-0.4.26.tar.gz (272kB) &nbs........

  • vagrant install on Debian Mint Ubuntu Linux RHEL Quick Setup Guide Tutorial


    1 - Install Vagrant apt install vagrant Make sure you have a supported Virtualization tool like Virtualbox or VMWare, Hyper-V etc.. It automatically detects and uses what you have. Virtualbox has a lot of support here with tons of images. 2 - Init Vagrant We'll init to have a Debian 10 box by default to show how quick and easy it is. vagrant init generic/debian10........

  • RHEL 8 CentOS 8, Alma Linux 8, Rocky Linux 8 System Not Booting with RAID or on other servers/computers Solution for dracut and initramfs missing kernel modules


    This seems to have changed for RHEL 8 where a normal dracut to update your initramfs creates a system that only boots for the running kernel. For example if you have Kernel 5 and then chroot into a RHEL 8 variant which uses kernel 4.18, and run dracut, it seems that by default the system will be unbootable. It is also the case that if you move your RAID array or drives to another server that it will be unbootable, because dracut seems to only include modules needed for the curre........

  • Virtualbox Best Networking Mode In Lab/Work Environment without using NAT Network or Bridged


    Virtualbox is a very powerful tool, but for some use cases it is less than optimal. Say you are in a work, lab or other environment where you are not alone on the physical network and there could be overlap of IPs, but you need all of your VMs to be contactable from your host, VMs need to communicate with each other, and VMs need internet. NAT Network will give you VM to VM communication and internet, however, it is buggy and unstable. It also doesn't allow host to VM co........

  • debootstrap how to install Ubuntu, Mint, Debian install


    In this example we install debian 10 with --variant=minbase which gives us a minimal/tiny install. Don't use variant if you want the full size install. mkdir /tmp/deb10files debootstrap --variant=minbase buster /tmp/deb10files/ Did you get an error? debootstrap --variant=minbase buster /home/theuser/VMs/deb10files/ You'll get this error if you make a directory in your home........

  • Linux grub not using UUID for the root device instead it uses /dev/sda1 or other device name solution


    You can read lots of posts about this issue but there is not much information about why this is the case or how grub determines the root= device name. Some even suggest modifying grub.cfg manually which is a disaster as the next kernel update will cause grub to revert back to the device name. For most people this won't be an issue but those using template system, automated deployments and working in embedded may run into this issue with custom embedded and created minimal kernel........

  • Linux How to Check Which NIC is Onboard eth0 or eth1 Ubuntu Centos Debian Mint


    So say you happen to have 2 NICs of the exact same chipset, they will generally show up as the same name, with possibly a different revision in lspci. Normally this is not an issue if you have a server with 4 NICs, generally the eth0 to eth3 appears from left to the right (or right to left on some vendors) so it doesn't take much figuring out. Generally if you have different chipsets for different NICs, it should be easy to know which one is eth0 or the first NIC in the OS.........

  • Dell PowerEdge Server iDRAC Remote KVM/IP Default Username, Password Reset and Login Information Solution


    Are you new to the company, datacenter or a third party who is responsible for deploying a fleet of servers from scratch. The first step is to normally login to the KVM so you can perhaps manually reinstall, PXE boot the Cloud Image or reimage/reinstall an OS but you need access to the KVM/IP or what Dell calls iDRAC. It's common that you may have forgotten this information or that another employee or colleague has changed the info and did not tell you, that they have left the........

  • Nvidia Tesla GPUs K40/K80/M40/P40/P100/V100 at home/desktop hacking, cooling, powering, cable solutions Tutorial AIO Solutions


    Do you have access to some old Tesla GPUs and want to try them at home in your Desktop or old Server? Some people have wanted to try these units for gaming but keep in mind they have no video out port, they were only meant for AI applications such as Deep Learning. The easiest way by far is to choose an AIservice that has everything ready to go, perhaps with a bunch of Docker or Kubernetes containers. This can be done with Cloud services like Google, Amazon and many........

  • Enable Turbo Mode for CPU Ubuntu Linux Mint Debian Redhat


    Sometimes due to your BIOS/EFI you may find that you have chosen "Energy Efficient" for your CPU which may effectively disable turbo mode. This is because "Energy Efficient" will often restrict or throttle your CPU to the base speed. This can impact nearly any CPU such as Intel's, AMDs, Opteron, Xeon etc... This is of course frustrating, for example if you have a CPU that is 2.0GHz base speed but turbo to 2.5GHz, you will never hit more than 2GHz.........

  • RTL8812BU and RTL8822BU Linux Driver Ubuntu Setup Archer T3U Plus


    PCIID 2357:0138 First install your kernel headers/source: sudo apt install linux-headers-`uname -r` 1.) Clone this git repo git clone https://github.com/morrownr/88x2bu-20210702 2.) Run the install cd 88x2bu-20210702 ./install-driver.sh 3.) Load the driver mod........

  • from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60 sys.stderr.write(f"ERROR: {exc}") from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packag


    Solution for python pip3 not working anymore from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60 sys.stderr.write(f"ERROR: {exc}") wget https://bootstrap.pypa.io/pip/3.5/get-pip.py python3 get-pip.py DEPRECATION: Python 3.5 reached the end of its life on September 13th, 20........

  • ModuleNotFoundError: No module named 'pip._internal' solution python


    pip3 install requests Traceback (most recent call last): File "/home/user/.local/bin/pip3", line 7, in from pip._internal.cli.main import main ModuleNotFoundError: No module named 'pip._internal' As a quick and temp fix call the OS installed python and not the user .local/bin installed pip3 /usr/bin/pip3 install requests Collecting requests Cache e........

  • Cisco Switch / Router How To Restore Factory Default Settings


    1.) Make sure your conf register is 0x2102 Do show version and at the very end of the output you will see the Configuration register. show version Configuration register is 0x2102 If the config register is not 0x2102 then enter this command: r1#configure terminal r1(config)#config-register 0x2102 r1(config)#end 2.) Let's Erase the NVRAM/flash........

  • Cisco 2900 3900 Router Password Reset How To Reset Enable Password


    It is a bit different and annoying here for these types of routers/models as you need to physically remove the CF (Compact Flash) and only then, will it enter ROMMON mode (Ctrl + Pause remotely over the console will not do it for us). This means you cannot do this remotely, or at least not without the help of a remote/physical helper. Step 1.) Power off, router and remove CF Disk Slot#2 Go to the router and remove the slot#2 cover uses your hand or it may help to use a........

  • How To Install convert MBR Legacy booting GRUB to EFI from a non-EFI Linux Environment Ubuntu Mint Debian


    1.) Create your EFI/ESP Partition If you happen to have some free space on the drive already then this is easy, just create a new partition of at least 100M. The nice thing about the EFI spec is that it must just be in the first 2.2TB of space so for most users, it means you can simply resize the last partition(downsize it by 100M) and then add an EFI partition at the end. For example if you had this partition scheme: /dev/sda1 = /........

  • Translating "cisco" ...domain server (255.255.255.255) Cisco Router/Switch Solution


    If you are in enable mode and make a typo, the router will treat it as a domain name and try to resolve it, and if it can't resolve it, you'll have to wait until it times out. Here's how to solve the Translating domain server error in Cisco Enter this in config mode: no ip domain-lookup Be sure to sav........

  • Error: Failed to download metadata for repo 'appstream': Cannot prepare internal mirrorlist: No URLs in mirrorlist Solution for Centos8 yum package install error


    Are you getting this error in CentOS 8 when trying to use yum to install a package? Error: Failed to download metadata for repo 'appstream': Cannot prepare internal mirrorlist: No URLs in mirrorlist What we need to do is not use the automatic mirror list and manually set the base URL Solution sed -i 's/mirrorlist/#mirrorlist/g' /etc/yum.repos.d/CentOS* sed -i 's%#baseurl=http://mirror.centos.org%baseurl=........

  • i915 nouveau Nvidia GPU not starting lightdm Xorg failing solution for Could not determine valid watermarks for inherited state


    It may appear to be an Xorg or lightdm/gdm/mdm error but in reality for many users with this issue, it's a driver conflict and issue. I had a system that had two GPUs, an Intel and Nvidia GPU. The only thing that got it working was to remove the nouveau driver and blacklist it so it never came back, then the Intel GPU works fine without these issues. Solution sudo rmmod nouveau add nouveau/other driver to blacklist edit th........

  • RTL8821AU Setup Configure Wifi Realtek 8821 in Linux Debian Mint Ubuntu Howto


    The easiest way for the 8821AU Realtek Wifi chipset / TP-Link T2U Plus: Bus 002 Device 003: ID 2357:0120 TP-Link Archer T2U PLUS [RTL8821AU] First install your kernel headers/source/other required tools: sudo apt install linux-headers-`uname -r` make gcc bc Clone this github repo with the driver: git clone https://github.com/morrownr/8821au-20210708 Run the compile/ins........

  • How To Tell Which Repository a Package Comes From Debian Mint Ubuntu


    Just use apt-cache policy to find the repo of a package: apt-cache policy lxd lxd: Installed: 3.0.3-0ubuntu1~18.04.2 Candidate: 3.0.3-0ubuntu1~18.04.2 Version table: *** 3.0.3-0ubuntu1~18.04.2 500 500 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages &nb........

  • Linux Debian Mint Ubuntu How To Add Non-Free Repositories and Contrib


    You just add on "non-free" at the end of each repo, like the example below: If you wanted contributed packages then you could also add "non-free contrib" to each repo line. Don't forget to do an "apt update" to see the new packages, this is especially handy for getting more drivers for devices with the firmware-linux-nonfr........

  • How To Upgrade Linux Mint 18.2 to 18.3 to 19.x and 20.x


    Linux Mint offers an easy and painless upgrade path through the last 3 versions, which means no more reinstalling to stay current with the latest version. The only catch is that you need the latest of each version, so for 18, you need 18.3 before you can go to 19, and then 19.3 (or latest), until you go to 20. However, it's really a small price to pay and on the machines we've tested, the upgrade went seamlessly each time (although sometimes video drivers/custom kernel modules l........

  • How To Do Linux Network Bonding Teaming in Mint Debian Ubuntu


    Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows. There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........

  • LXC Containers LXD How to Install and Configure Tutorial Ubuntu Debian Mint


    If you are using mint, delete the preference that stops snap from installing (as it is required for lxc) sudo rm /etc/apt/preferences.d/nosnap.pref 1. Install lxd: sudo apt install lxd Issues install lxd or errors? Click here Debian at this time does not have lxd so you'll need to use snap: sudo apt in........

  • GlusterFS HowTo Tutorial For Distributed Storage in Docker, Kubernetes, LXC, KVM, Proxmox


    This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory. Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage. One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........

  • How To Enable Linux Swapfile Instead of Partition Ubuntu Mint Debian Centos


    This may be necessary if you have a VM or if for some reason you just want to be more efficient with your space and have the flexibility of changing your swap space at will. What we mean is the ability to use a "swap file" or similar to the Windows "pagefile" that normally resides on the root or c: partition of Windows. Here's all you have to do and then you to can have a single partiton with everything, including the swap file on the root partition if you........

  • 404 Not Found [IP: 151.101.194.132 80] apt update Debian 11 Bullseye Solution The repository 'http://security.debian.org bullseye/updates Release' does not have a Release file.


    This happens during an apt update and is related to an issue with sources.list, which is particularly troubling, if you are doing a "live-build". P: Configuring file /etc/apt/sources.list Hit:1 http://deb.debian.org/debian bullseye InRelease Get:2 http://deb.debian.org/debian bullseye-updates InRelease [39.4 kB........

  • (firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory) Solution


    (firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory) ExceptionHandler::GenerateDump cloned child 9743 ExceptionHandler::WaitForContinueSignal waiting for continue signal... ExceptionHandler::SendContinueSignalToChild sent continue signal to child [Parent 9562, Gecko_IOThread] WARNING: pipe error (40): Connection reset by peer: file /build/firefox-EymEXX/fire........

  • Vbox Virtualbox DNS NAT Network Mode NOT working


    There is a random bug that sometimes occurs with Vbox NAT mode DNS, although it has never happened in the past and Vbox was working fine until recently. The symptom is that you can see it does get an IP+ DNS from the Vbox NAT DHCP. Below we use resolvectl dns and verify the DNS server is set to 10.0.2.3 which is the DNS from Vbox NAT. We can ping it but it does not respond to any DNS requests when we use dig @10.0.2.3 realtechtalk.com........

  • Docker Tutorial HowTo Install Docker, Use and Create Docker Container Images Clustering Swarm Mode Monitoring Service Hosting Provider


    The Best Docker Tutorial for Beginners We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........

  • How To Create OpenVPN Server for Secure Remote Corporate Access in Linux Debian/Mint/Ubuntu with client public key authentication


    Why choose OpenVPN instead of a firewall appliance? OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time. When comparing OpenVPN with traditional firewal........

  • HongKong VPS Server, Cloud, Dedicated Server, Co-Location, Datacenter The Best Guide on Hong Kong, China Internet IT/Computing


    In our 2024 VPS Server/Cloud Buyer's Guide, we place the location of your VPS/hosting/server as one of the priorities that is often overlooked. 2024 Update - Datacent........

  • Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source. E: Package 'wget' has no installation candidate. Solution


    These types of errors are normally caused by misconfiguration of your /etc/apt/sources.list. In this example on Debian 10, if you didn't complete the install correctly, you will have no repos enabled and only rely on CDROM. "Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source. E: Package 'wget' ha........

  • Wazuh / OSSEC Install and Configuration Howto Tutorial Guide for Monitoring Agents SIEM


    How To Install Wazuh Server / Quickest Installation Wazuh (forked from the well known OSSEC project) is a full SIEM (Security Information Event Management) that works extremely well with the platforms it natively supports as an "Agent", which allows you to do scans of everything such as all processes running, CVE vulnerability check, incident reporting etc... Prerequisites: A lot of issues with Wazuh seem to be caused by i........

  • Ansible Tutorial - Playbook How To Install From Scratch and Deploy LAMP + Wordpress on Remote Server


    1. Let's work from an environment where we can install Ansible on. If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way: sudo apt install gpg sudo add-apt-repository ppa:ansible/ansible sudo apt update........

  • Proxmox Update Error https://enterprise.proxmox.com/debian/pve bullseye InRelease 401 Unauthorized [IP: 144.217.225.162 443]


    Are you getting this error in Proxmox while trying to apt update or install Ceph? apt update Hit:1 http://security.debian.org bullseye-security InRelease Err:2 https://enterprise.proxmox.com/debian/pve bullseye InRelease 401 Unauthorized [IP: 144.217.225.162 443] Hit:3 http://ftp.hk.debian.org/debian bullseye InRelease ........

  • Proxmox How To Enable Ceph Distributed Storage Cluster with OSD and Pools


    How To Install Ceph If you stopped an install of Ceph midway you will need to manually restart it with "pveceph install" Remember that your VM needs to have working internet (gateway) and DNS in order to connect to the apt repo to download all of the packages that Ceph requires. Remember to repeat these steps for each node that you want Ceph on. ........

  • pulseaudio issue on QEMU/KVM guest VM when microphone is replugged/unplugged pulseaudio: pa_threaded_mainloop_lock failed pulseaudio: Reason: Invalid argument


    Here is the scenario, you are using QEMU/KVM and are using something like the AC97 sound driver to pass the host audio to the guest via pulseaudio. This is useful because you can transparently pass your mic input from the host which means you can mute your microphone from the host, which prevents the guest from receiving any mic input even if unmuted. Mute / Unmute Fix This issue also seems to happen even if you press the mute button on the microphone and then unmute,........

  • Virtualbox VBOX Howto Port Forward To Guests


    NAT Network, the VMs can communicate but your host cannot access them by default. NAT VMs have internet but cannot communicate with each other. Bridged is simple and allows full LAN access as if you had a physical machine plugged in but is often bad for testing, work or corporate environments and is not very portable when it comes to moving your VMs to other locations and networks. Here is how you can use NAT Ne........

  • Linux Ubuntu Debian Centos Mint - How To Check if Intel VT-x or AMD-V Hardware Virtualization is Enabled?


    From the terminal do this: cat /proc/cpuinfo|grep -E "svm|vmx" You should get output like this(svm = AMD-v and vmx=Intel-VTx): flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqd........

  • Linux Mint 20 cannot install snapd missing solution


    The Linux Mint team has disabled it by setting an apt preference, you can edit or just remove the file: sudo apt install snapd Reading package lists... Done Building dependency tree Reading state information... Done Package snapd is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source........

  • Virtualbox VBOX How To Install Guest-Utils/GuestUtils so drag and drop and clipboard works Ubuntu Mint Debian Linux


    Just install these packages and restart the VM: 1.) Enable guest-utils on the host side: sudo apt install virtualbox-guest-utils virtualbox-guest-x11 2.) Enable guest editions on the VMside This must be done for each VM that you want to have the guest additons for accelerated GPU performance and for drag and drop/clipboard sharing First insert the Guest Addtions CD image........

  • How to install Kubernetes with microk8s and deploy apps on Debian/Mint/Ubuntu Linux


    Kubernetes Easy Beginners Tutorial/Architecture Guide Kubernetes is known as container orchestration and we should start at explaining the container part of it. A Container is what runs the actual application and based on an Image, and are more comparable to something like an LXC Container, Virtuozzo/OpenVZ using the Linux Kernel Namespaces feature. Containers run these images as independent, isolated operating environments under the O........

  • Cisco Howto Configure Console Port/Terminal/Comm Server with Async Cable Setup


    This assumes that you've already installed the relevant HWIC cards eg. Cisco Asynchronous Serial NIM These are essentially cards that you install into your router, once installed you connect an Async cable to one of the ports on the card which normally gives you 8 console cables and are normally labelled 1 through 8. You connect all of the cables to the devices you need (even non-Cisco devices) whether switches, routers or firewalls, they will usually work. The real m........

  • Cisco Switch Howto Reset Password


    This was done on a 2900 but applies to all the switches of the same era. Step 1 - Power Cycle and enter recovery mode If you have physical access you can power cycle and hold the mode button down for 15 seconds. After that the SYS light will flash on the switch and you will see the following screenshot. If you don't have physical access (eg. it is a datacenter swich over console only) then power cycle and hit "Ctrl+Pause/B........

  • bash how to hide username/customize prompt Linux Debian Redhat Ubuntu Solution


    Just edit your ~/.bashrc and add this at the very end: export PS1="realtechtalk.com" Then your prompt will look like this: bladeblox:uptime 08:47:14 up 48 min, 1 user, load average: 1.00, 1.07, 0.96 If you wanted a dollar sign at the end then you would change it like this: export PS1=&........

  • Unable to mount location Failed to retrieve share list from server: Connection timed out - Samba/Linux Filesharing Not working Ubuntu Mint Linux Solution


    So you're trying to browse to a properly configured Samba share but you get this error: Unable to mount location Failed to retrieve share list from server: Connection timed out If your config is right, it can be due to a protocol miss-match where your client has not enabled SMB3 but by default the other side (server) has enabled it. You can test this out to see with the smbclient tool........

  • EFI PXE grub2 Howto guide for Linux EFI PXE Booting on Debian, Mint, Ubuntu, RHEL


    Just a quick note and warning is that if you are testing to see if EFIPXE booting works on a VM, MAKE SURE it actually works. For example Iinitially tested using my Distro's QEMU 2.5+dfsg-5ubuntu10.46 and ovmf BIOS firmware (OVMF supports EFI). However, I found on old versions of QEMU (like 2.5), EFIbooting with GRUB NEVER works so it may appear that you have made a mistake when everything is fine when you boot a physi........

  • Juniper JunOS Command Overview and Howtos Switch, Router, Firewall Tutorial Guide


    Enable "cli" mode equivalent in JunOS cli Configure Mode configure So rather than going to the console on a Cisco switch and typing "enable" and then "conf t", the equivalent in JunOS is "cli" and "configure". How Do You Apply Changes You've Made? You can make all kinds of changes to the switch, but remember they are not........

  • Linux Grub not booting the intended kernel solution in Debian, Mint, Ubuntu how to specify which kernel to boot by default


    Traditionally kernels were numbered starting from 0 but by default the "new style" of grub boot loading considers each subkernel item to be different so if you have 3 entries for 4.40-148 rather than counting for 1. To get the expected behavior let's show this example and how we can boot it We do a grep on menuentry in /boot/grub/grub.cfg to see all of the bootable kernels rather than scrolling through loads of extra entries we don't care about (thou........

  • QEMU KVM Keyboard Problems Not Working Right Repeating Characters, Ctrl+C Copy and Paste not working right when using PS2 mouse in guests Solution


    It seems that QEMU/KVM's default PS2 mouse and keyboard doesn't work right in most cases. I have especially observed issues using Ctrl+C and Ctrl+V and in Linux you may see repeated key presses in the terminal and you will wonder why you copied something and it's not in the clipboard when you try to paste. The way to temporarily fix it is to press the key that is repeating once(works in Linux but not really in Windows). Sometimes when moving your mouse it will also s........

  • Linux how to compile binary with static sharedobjects embedded instead of dynamic to use on multi-distributions and avoid glibc compatiblity issues


    One simple flag to configure will create a makefile that statically links all the shared objects and embeds them instead the binary execute. This means as long as you have the same architecture that things should run. Eg. if you have an old version of Debian with a different version of glibc, then this will solve that problem. ./configure LDFLAGS="-static" To test that it is really statically linked run ldd: ldd src/wget........

  • CentOS 7 8 PXEBoot Netinstall Not Working Solution "Pane is dead "new value non-exisetnt xfs filesystem is not valid as a default fs type"


    The problem seems to be that whatever kernel and initrd you have is tied to an old version of CentOS 7 that is no longer in the current repos of most mirrors. If you were previously able to PXEboot and install CentOS and you are sure your network and tftp are good the problem is that you have an outdated kernel and initramfs that point to a defunct version.........

  • CentOS 6 EOL yum repo won't work Error: Cannot find a valid baseurl for repo: base Solution


    yum update Loaded plugins: fastestmirror Setting up Install Process Determining fastest mirrors YumRepo Error: All mirror URLs are not using ftp, http[s] or file. Eg. Invalid release/repo/arch combination/ removing mirrorlist with no valid mirrors: /var/cache/yum/x86_64/6/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base You have mail in /var/spool/mail/root ........

  • CentOS 7 8 How To Disable SELinux


    To disable selinux temporarily and immediately: setenforce 0 To make it permanent edit /etc/selinux/config: vi /etc/selinux/config........

  • Wordpress How To Add Featured Image To Post in Hueman Theme


    It is different than other Wordpress templates. You have to edit the following file: wp-content/themes/hueman/parts/single-heading.php Add the following PHPcode to the bottom: ........

  • CentOS 7 8 yum error Trying other mirror. To address this issue please refer to the below wiki article


    The below appears at first to be a bad mirror DNS error, but if you've ruled that out you just need to clear your broken yum cache and things will be good. yum update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.01link.hk * extras: centos.01link.hk * updates: centos.01link.hk http://mirror.worria.com/centos/7.8.2003/os/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not........

  • How To Boot, Install and Run Windows 2000 on QEMU-KVM


    Interestingly enough Windows 2000 works fine on QEMU 64-bit but you have to specify Pentium as your CPU otherwise it doesn't complete the install (it will not pass the detecting/setting up devices phase). -vga cirrus is wise because it is supported by Windows 2000 and allows higher resolutions and 24-bit color. -cpu Pentium emulates an old computer and is necessary for install to complete -device rtl8139 is important as this oldschool Realtek 8139 NIC is supported by W........

  • Huion and Wacom Tablets How To Install in Linux Mint / Ubuntu and make the stylus work properly


    It took a lot of fiddling to make a Huion Kamvas 13 Pro work in Linux but it simple once you know what to do. Don't bother searching as it is unlkely there is a guide out there that will actually make your tablet work. It mainly comes down to the fact that the hid_uclogic kernel module is buggy or doesn't support MANYof these wacom based/Huion tablets properly. What was happening with me is that Ihad the Kamvas 13 Huion setup as a secondary screen/monitor.&nb........

  • How To Replace Audio Track of Video using ffmpeg


    A very common use case is that you don't want to waste time using a video editor that requires you to open it up and manually import the video clip and audio clip, then manually delete the old audio track and import the video and new audio. That's too much work and time since we don't want to go through the hassle. ffmpeg is our solution, all we have to do is specify 3 variables and we're done! -i Windows2019-Server-Noaudio.mp4 is our in........

  • Virtualbox Error Cannot register the hard disk because a hard disk with UUID already exists solution


    Cannot register the hard disk '/some/path/windows-marking.vdi' {f54def00-2252-43f5-9178-0998636cad61} because a hard disk '/other-path/windows-marking.vdi' with UUID {f54def00-2252-43f5-9178-0998636cad61} already exists. Result Code: NS_ERROR_INVALID_ARG (0x80070057) Component: VirtualBoxWrap Interface: IVirtualBox {0169423f-46b4-cde9-91af-1e9d5b6cd945} Callee RC: VBOX_E_OBJECT_NOT_FOUND (0x80BB0001)........

  • apcupsd how to setup and monitor APC UPS units


    It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc.. wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866 tar -zxvf apcupsd-3.14.14.tar.gz cd apcupsd-3.14.14 [root@somebox apcupsd-3.14.14]# ./conf........

  • How To Password Reset, Recover, Bypass, Remove and Unlock on Windows 10,8,7,Vista,XP,NT,2000,2003,2008,2012,2016,2019 Administrative Login Programs


    If you've come here, don't be embarraassed, working in IT, this is the MOST common computer problem that almost everyone will encounter. The reason why I'm doing this post is because I've seen an increase from colleagues and admins having this problem and many times it's not even your fault. A common scenario is that someone acquires a new or used computer which they weren't given the password for. Fortunately Ihave a detailed list of all the options whether free or pa........

  • Nvidia Ubuntu Linux Screentearing Video with solution driver


    This seems to happen on most if not all Nvidia cards but the good news is that if you are using any of the Linux drivers and have the nvidia-settings tool installed it is just a simple command. Solution: nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }" Enter the above command in your terminal and the screentearing will be fixed which is like enabling Tear Free on AMD cards.&........

  • Linux NIC connecting at 100M instead of 1000M gigabit speeds? It could be overheating


    I was using a small box as a router and one of the ports started going off and coming back at 100M. I truly believe it is simply that it was a case of overheating. Although CPUtemps were only about 67 degrees, the physical box itself was almost burning hot. Isolved the cooling issue and never had the issue again. Jul 28 15:09:27 swithbox kernel: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jul 28 15:09:28 swithbox kernel:........

  • http://vault.centos.org/5.9/os/i386/repodata/filelists.xml.gz: [Errno -1] Metadata file does not match checksum solution


    http://vault.centos.org/5.9/os/i386/repodata/filelists.xml.gz: [Errno -1] Metadata file does not match checksum yum clean all yum makecache yum update........

  • Linux Ubuntu Wifi Disabled Only Works When Laptop Plugged Into Wall AC Power


    This is very frustrating but the fix is usually easy once you read this blog. It's very frustrating when you find that your Linux / Ubuntu laptop's wifi will NEVER work unless it is plugged into the power. The wifi menu may say "Wifi disabled by hardware switch". You may find that your laptop has no switch or has a function wifi button on the keyboard but this does not work or have any effect. The cause is usual a "wmi" kernel module and simply doing an........

  • CentOS 6 impossible to compile a newer libguestfs


    yum -y install gcc make gperf genisoimage flex bison ncurses ncurses-devel pcre-devel augeas-devel augeas readline-devel checking for cpio... cpio checking for gperf... no configure: error: gperf must be installed configure: error: Package requirements (augeas >= 1.2.0) were not met: Requested 'augeas >= 1.2.0' but version of augeas is 1.0.0 yum remove augeas augeas-libs augeas-devel wget http://downl........

  • How To Get Started on Ubuntu with gpt-2 OpenAI Text Prediction


    apt install software-properties-common add-apt-repository ppa:deadsnakes/ppa apt update apt install python3-pip apt install python3.7 curl gnupg python3.7-dev git ln -s /usr/bin/python3.7 /usr/bin/python3 pip3 install numpy keras_preprocessing curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add - echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........

  • QEMU-KVM KVM Command Line Practical Guide


    Iam going to build this based on a series of small howto QEMU / KVMposts I've made as I feel much of the information is actually hard to find and piece together from the rest of the web. What I'm going to focus on is how to use virtio as the NIC because if you don't you get very slow NIC speeds but with the virtio NIC model you basically get host speeds. /usr/libexec/qemu-kvm -enable-kvm -smp 8 -m 16000 -net user -net nic,model=virtio -drive file=ubuntu-gpt2l........

  • virt-resize: error: libguestfs error: could not create appliance through libvirt.


    This is caused because the user is running as qemu for virt-resize and if qemu does not have privileges to read from the source and write to the destination, it will fail with the below. So either change the uid of qemu or change the ownership of the source and target. Solution: export LIBGUESTFS_BACKEND=direct virt-resize --expand /dev/sda2 /root/kvmtemplates/windows2019-eval-template.img /root/kvmguests/kvmkvmuser4515........

  • How To Speed Up Linux Ubuntu and Debian Based Computers By Improving CPU Performance and Changing the CPU Governor


    I used to believe that for Desktops especially that the "ondemand" CPUfrequency changing that kernels included with Ubuntu and Debian based distros have would be sufficient for snappy performance. However, you can feel the lack of performance on the fastest computer if you have ondemand. A lot of times even under high load 100% of your CPUfrequency in MHz will not be used. For example a 2.8Ghz CPUmay only run at 1.8MHz or even .9GHz. Now........

  • How To Install NextCloud on Centos 7 and Centos 8


    yum -y install wget unzip wget https://download.nextcloud.com/server/releases/nextcloud-18.0.2.zip unzip nextcloud-18.0.2.zip yum -y install php php-mysqlnd php-json php-zip php-dom php-xml php-libxml php-mbstring php-gd mysql mysql-server Last metadata expiration check: 0:58:02 ago on Fri 13 Mar 2020 02:12:49 PM EDT. Dependencies resolved. ===================================================================........

  • ERROR: Could not find a version that satisfies the requirement PIL (from versions: none) ERROR: No matching distribution found for PIL


    pip install PIL ERROR: Could not find a version that satisfies the requirement PIL (from versions: none) ERROR: No matching distribution found for PIL The import name is PILbut the actual pip package is called "Pillow" pip install Pillow........

  • ZTE Camera Cannot Work unable to connect to camera. Camera has been disabled becaue of security policies or is being used by other apps


    unable to connect to camera. Camera has been disabled becaue of security policies or is being used by other apps They say to do a factory reset but in some cases it doesn't work and the camera mysteriously just won't work so it appears to be a hardware error if that happens.........

  • How To Install OpenProject on Centos 7 Step-by-Step Guide


    There are a few caveats that may not be obvious to everyone so I am going to cover them here but keep this in mind before starting. Before starting install epel or you will be missing tesseract: yum -y install epel-release #1) When you specify your SSL certificate with a full path, it really needs to exist where you tell it to (including the default location of /etc/ssl/certs and /etc/ssl/c........

  • How To Install python 3.4 3.5 and up on Linux with wine - Working Solution


    This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu! Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........

  • OpenVZ vs LXC DIR mode poor security in LXC


    It is unfortunate that LXC's dir mode is completely insecure and allows way too much information from the host to be seen. I wonder if there will eventually be a way to break into the host filesystem or other container's storage? OpenVZ better security: [root@ev ~]# cat /proc/mdstat cat: /proc/mdstat: No such file or directory /dev/simfs 843G 740G 61G........

  • Radeon R3 GPU on Debian Crashing


    Occasionally my whole screen locks up and I cannot even swith to the console and I find this in my syslog: *-display description: VGA compatible controller product: Mullins [Radeon R3 Graphics] vendor: Advanced Micro Devices, Inc. [AMD/ATI]  ........

  • Howto Set Static IP on boot in initramfs for dropbear or other purposes NFS, Linux, Debian, Ubuntu, CentOS


    This is only really necessary in the case you don't want DHCP. If you are dealing with an encrypted LUKS server on the internet, you will often want to have a static IP so you know which IP to connect to (or if you have a semi-static IP assigned by DHCP). SET IP Address by /etc/initramfs-tools/initramfs.conf IP Address=192.168.1.27 Gateway=192.168.1.1 Subnet Mask: 255.255.255.0 Hostname=myhome.com IP=192.1........

  • CentOS 8 how to convert to a bootable mdadm RAID software array


    The cool thing here is that we only need 1 drive to make a RAID 10 or RAID 1 array, we just tell the Linux mdadm utility that the other drive is "missing" and we can then add our original drive to the array after booting into our new RAID array. Step#1 Install tools we need yum -y install mdadm rsync Step #2 Create your partitions on the drive that will be our RAID array Here I assume it is /dev........

  • ADATA USB Thumb Drive Issues


    This is the reason that I don't like the new ADATA USB drives such as the UV128/64GB or 128GB drives and other ones that look to be the same style (the green sliding USB connector). They just don't work well from new and never work properly at any point. [ 788.242463] usb 1-1.2: new high-speed USB device number 16 using ehci-pci [ 788.339816] usb 1-1.2: New USB device found, idVendor=125f, idProduct=db8a [ 7........

  • SSH How To Create Public/Private Key Pair and with a Larger Keysize than 2048 bits


    The problem is that by default ssh-keygen loves to generate an easy to crack 2048 bit key (RSA). Supposedly having a larger keysize helps such as 4096 or 8096 but it is thought to be useless still against Quantum computing. How can I check my existing keysize and type? ssh-keygen -lf /path/to/your/id_rsa.pub The output will be something like below followed by the hash. The first number is the key size and the second part will b........

  • ssh how to connect using a SOCKS 5 proxy with nc and proxycommand


    This is not about using ssh as a proxy, but rather, using a proxy when you are SSHing to another host and using ProxyCommand (where we normally use nc as our proxy tool). In newer versions of nc the syntax has changed to the following: ssh -o ProxyCommand="nc -x 127.0.0.1:1234" %h %p user@host The format must be like above in newer nc versions. Just be sure to change the 1234 to the port of your SOC........

  • Enable AMDGPU Linux Driver in Debian Ubuntu mint


    To enable amdgpu we have to set special kernel boot parameters. The easiest way is to make it permanent and apply to all kernels (no messing around with grub.cfg) so we'll edit those defaults in /etc/default/grub by changing the GRUB_CMDLINE_LINUX_DEFAULT parameter. After that don't forget to run "update-grub"to apply it (otherwise amdgpu will never be enabled). The opensource driver for AMD is really quite impressive these days, as we show it works with ve........

  • how to use ifplugd in Linux to execute a command or script when a NIC cable is unplugged or plugged in


    It is fairly simple to use once you know how to use it. However, the tricky thing is that by default it doesn't seem to be active or listen on any interface on manually specified. How To Install ifplugd First we install ifplugd sudo apt install ifplugd Let's enable it on our desired device(s) vi /etc/default/ifplugd set this line as so:........

  • mpv / mplayer with Radeon / AMD GPU Video Card Driver enable VDPAU GPU Accelerated Video Decoding


    The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration. Let's manually play with vdpau to make sure it works before we make it permanent: First make sure you have libvdpau installed: sudo apt install vdpau-driver-all If yo........

  • Centos 7 Stopped and Disabled Firewalld and ports still blocked


    This is a gotcha but be aware sometimes iptables may be active and loaded by default. Also make sure you don't just disable firewalld but also stop it otherwise it will still block stuff: systemctl stop firewalld If the above is not the issue then it is possible iptables is running and blocking stuff too, so you'll need to stop iptables. So in addition to opening firewalld or disabling it, you would need to disable iptables........

  • MariaDB / MySQL Reset Root Forgotten Password on Centos 7


    mysql reset root password. Oops I can't remember my MySQL root password! [root@centos7test etc]# mysql -u root -p Enter password: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) First we need to stop mariadb: systemctl stop mariadb Now we need to restart it with skip-grant-tables whic........

  • Linux 3D Performance benchmarks with glxgears 59-60fps solution


    You need to disable vsync like this when running glxgears: vblank_mode=0 glxgears For Nvidia drivers do this: __GL_SYNC_TO_VBLANK=0 glxgears Notice the higher than 59-60 fps results with vblank_mode=0: ATTENTION: default value of option vblank_mode overridden by environment. 7919 frames in 5.0 seconds = 1583.704 FPS 8187 frames in 5.0 seconds = 1637.266 FPS........

  • How To Install Asterisk 16 17 on Debian Ubuntu Linux


    Downloading and compiling from source to get the latest version of Asterisk is really simple with this guide. apt install gcc make g++ libedit-dev uuid-dev libjansson-dev apt install libxml2-dev sqlite3 libsqlite3-dev wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-16-current.tar.gz tar -zxvf asterisk-16-current.tar.gz cd asterisk-16.6.2/ ./configure If you get this error change y........

  • python import docx error


    sudo pip3 install python-docx [sudo] password for : Downloading/unpacking python-docx Downloading python-docx-0.8.10.tar.gz (5.5MB): 5.5MB downloaded Running setup.py (path:/tmp/pip_build_root/python-docx/setup.py) egg_info for package python-docx no previously-included directories found matching 'docs/.build' warning: no previously-included files matching '.DS_Store' foun........

  • Centos 7 tftpd will not work with selinux enabled


    In Centos 7 tftpd will not work with selinux. Clients will not be able to connect and this is all you'll see in the log (then nothing more): Sep 18 14:39:15 localhost xinetd[4327]: START: tftp pid=4331 from=192.168.1.65 On the client/computer side you will see this: TFTP. PXE-M0F: Exiting Intel Boot Agent Basically the client is being instantly connected and bloc........

  • Debian Ubuntu Mint Howto Create Bridge (br0)


    Having a network bridge allows you to bridge traffic under multiple devices so they can talk natively without using any special routing, iptables/firewall or other trickery. To create your bridge you need the bridge-utils package for brctl and if you want to do things like bridge VMs that run on a tap device you will need the uml-utilities which provides "tunctl". 1.) Install the utilities to make our bridge sudo apt-get i........

  • Debian Ubuntu and Linux Mint Broken Kernel After Date - New Extra Module Naming Convention


    I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules. One other weird thing is that sometimes........

  • Wordpress overwrites and wipes out custom htaccess rules and changes soluton


    cat .htaccess RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . index.php [L] I keep reading there is a "# BEGIN WordPress" and a "# END WordPress" in the wordpress htaccess above but there is clearly not. Even more strange is that my permissions are just 444 (read only). so i changed it........

  • Apache htaccess and mod_rewrite how to redirect and force all URLs and visitors to the SSL / HTTPS version


    It is really simple using .htaccess with mod_rewrite. Here is all you need: RewriteCond %{SERVER_PORT} 80 RewriteRule ^(.*)$ https://site.com/$1 [R=301,L] Another more graceful way is to use the %{SERVER_NAME}variable to make it dynamic. Just be careful that the server name will always match what you expect. (eg. if you are doing load balancing or clustering what if the server name may be somethi........

  • python 3 pip cannot install mysql module


    python3 testserver.com-car-scraping.py html.txt Traceback (most recent call last): File "testserver.com-car-scraping.py", line 5, in import mysql.connector ImportError: No module named 'mysql' For some reason it won't install properly even though I have the mysql client on this machine installed too. Solution: You need the mys........

  • Bind / named not responding to queries solution


    By default bind will not respond to outside queries for security reasons. In most distributions you will find the default in /etc/named.conf looks like this at the top under options: listen-on port 53 { 127.0.0.1; }; listen-on-v6 port 53 { ::1; }; directory "/var/named";........

  • Ubuntu/Gnome/Mint/Centos How To Take a partial screenshot


    By default printscreen or alt print screen will get the whole desktop or the application in focus, respectively. But what if you want to select a portion of the screen? gnome-screenshot: ksnapshot compiz This is a nicely integrated solution sudo apt-get install compizconfig-s........

  • Cisco IP Phone How To Reset To Factory Settings Instructions CP 9971, 8800, 8900, 8845, 8851, 8841, 8831, 7961, 7960, 7945, 7942, 7941, 7940.


    This would be crucial especially if the phone is hardened, not being able to reset or change settings could prevent a phone registering in a new environment or even when migrating from office to office. This applies even if you are trying to migrate the phone to another platform such as Asterisk/FreePBX etc... This guide applies to nearly all of the Cisco IP phones that you would use in CME or CUCM from several years ago including models: 9900, 9971, 8800, 8900, 8845, 8851, 8841........

  • Cisco Unified Communications Manager / CUCM IP 8.6,10,12 Install Error Solution


    Install Errors on Version 12: This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5 on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error. *Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install. What really causes this even though you successfully install........

  • nmap how to scan for all ports and not just the 1000 most common ports


    nmap by default only scans the most common, 1000 ports. How about if you want all ports because some services may be listening on non-standard ports? Just use the -p- switch for all ports or -p1-65535 nmap -p- somehost.com........

  • Cisco Unified Communications Manager 12 Install Errors on Proxmox/KVM


    The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs. qemu-kvm command: /usr/libexec/qemu-kvm -version QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard ........

  • Linux qemu-kvm How To Enable Soundcard in Guestl


    Pass QEMU this flag: -soundhw ac97 Or you could use (for a Ensoniq soundcard): -soundhw es1370 However on some machines I get this error: pulseaudio: pa_simple_new for capture failed pulseaudio: Reason: Connection terminated pulseaudio: pa_simple_new for capture failed pulseaudio: Reason: Connection terminated audio: Failed to create voice `ac9........

  • QEMU-KVM Windows and Server Guest Installs Mouse Tracking Pointer Location Solution


    You may have noticed if you are running QEMU/KVMmanually that in Windows the the position of the physical mouse does not match where the mouse is positioned within Windows. There is an easy command to pass to qemu-kvm or qemu-system (whatever you call your binary): -usbdevice tablet The above flag will fix your mouse pointing problems whether you are running Windows 95, 98, NT, XP 2000, 2003, Vista, 7, 8 10 or Server 2000, 2003, 2008, 2012, 2016 or 2........

  • the sign-in method you're trying to use isn't allowed. For more info, contact your network administrator - solution for active directory


    This is usually because the Group Policy forbids that user or group from logging in. run "gpmc" (not "gpedit.msc" as that is for local computer settings when you are not using Active Directory) or go to Administrative Tools and Group Policy Management. Edit the default domain policy like below........

  • Skype For Business 2015 and 2019 Guide, Reference, Howto and Troubleshooting Solutions


    https://docs.microsoft.com/en-us/powershell/module/skype/?view=skype-ps Troubleshooting Client Connectivity Issues The first step is to enable full logging in the Skype Client itself and then check the log on the client side. In Windows this normally means going to the Skype client "settings" and then "Enable Full Logging". Aft........

  • Linux bash prompt why does it not show username@host and the current directory?


    Perhaps you've just seen this in the bash prompt: -bash-4.1# Instead of the expected user@hostname# It is probably because you are missing .bash_profile or .bashrc in your home directory Check for yourself: ls -al ~/|grep -E ".bash_profile|.bashrc" -rw-r--r--. 1 root root&nbs........

  • How to install and setup LXC Containers (OpenVZ alternative) on Centos 6 / 7


    If you don't aleady have it, you'll need EPEL Install LXC yum -y install lxc lxc-templates Loaded plugins: fastestmirror Setting up Install Process Loading mirror speeds from cached hostfile * base: mirror.it.ubc.ca * epel: mirrors.kernel.org * extras: mirror.it.ubc.ca * updates:........

  • ssh reverse proxy to enable remote access behind a LAN and firewall


    So say you are behind a typical NAT/LAN setup whether at home, work or while travelling. What if you have a computer or server that you need to connect to from the outside? Yes you could use a VPN but a quick and dirty, temporary and secure way is to use SSH's Reverse Tunneling Proxy feature. Requirements On the remote ssh server host you need the GatewayPorts option enabled in sshd_config (be........

  • How To Use Letsencrypt SSL/TLS Encryption to Create Certificates without installing on the target machine


    For some reason, perhaps you don't want to run a daemon or let Letsencrypt have access to your production server. There is a way to use it like a normal CSR/CA setup in manual mode. ./letsencrypt-auto certonly --manual -d realtechtalk.com - www.realtechtalk.com   Eventually you will get prompted to create a certain path and file with certain data: Create a file containing just this data: Casdfasfadsfsad........

  • Cisco Router Setup Guide and Tutorial Howto With Commands and Examples


    In most of the Cisco router IOS I find the ports like ge0/0 ge0/1 and ge0/2 or whatever your ports are down. They will not even give you a link light. So one of the first tasks should be getting the port you are working with up. In my case the first goal is often connectivity with the LAN and WAN. LAN = your local area network (eg. in the office/home ) WAN= your ISP/public internet (eg. fiber/cable/dsl/ethernet).........

  • Cisco Switch Setup Guide Command List


    Enter configuration console: enable configure terminal This is important because if your console doesn't look like below none of the commands will work! Switch(config)# Save and Apply Settings wr Show Switch Configuration: show run Show Port List/Sta........

  • Cisco Switch Reset To Factory Defaults


    This works on the 2000 and 3000 series generally. *The easy way is to just hold the mode button for 10+ seconds. The full/proper way is below: 1.) Either power on the unit and hold the "mode" button or hold the "mode" button until you see the below: 00:04:08: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram 00:04:08: %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configur........

  • How To Boot Cisco CUCM UCSInstall 8.6, 10, 11 and 12 on KVM/Proxmox


    The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported. Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........

  • VBOX VirtualBox How To Import Raw .img Disk File


    What you need to do if you have taken a dd or real raw image dump of a hard disk: VBoxManage convertdd windows2019-eval-template.img windows2019.vdi --format VDI The .img is the raw dd dump and the .vdi is the output file. --format VDIspecifies to output to .vdi format If you are in a pinch you can always use qemu-kvm binary and manually specify the .img as your disk and i........

  • Using Microsoft's Group Policy Management Editor (GPME) To Change Default Permissions and Internet Explorer Security Settings


    The defaults in Windows 2016 server leave clients crippled so they can't even download basic files or software. But Group Policy Management Editor comes to our rescue! Use cmd or Powershell and run: gpme.msc Choose your domain/computer and then navigate like below and create a new menu entry for IE11 or whatever your version is. Don't be worried if the highest version is IE10 it means that it applies to IE10 AND above.........

  • iptables linux firewall recommended rules for public computing


    Whether you are at work, at the coffee shop or on the public internet here are some basic but effective rules for iptables that lock things down (eg. no one can SMB or SSH to you or really anything): # Generated by iptables-save v1.4.21 on Fri Dec 14 14:00:08 2018 *nat :PREROUTING ACCEPT [160:19844] :INPUT ACCEPT [4:357] :OUTPUT ACCEPT [2955:182236] :POSTROUTING ACCEPT [2955:182236] COMMIT # Completed on Fri Dec 14........

  • LVM How To Create Pool (dynamically allocated and not fully allocated)


    The main use I have for this is virtual servers being able to use an LVM volume but not occupying all of the space. It saves time in deploying machines and copying them so you are only copying the space they are using (eg. 5GB / 60GB vs the full 60GB). There are some disadvantages which is mainly the fact that thin pools by their nature allow you to "overallocate" disk space which is that you could use more space than is available on the disk itself and corrupt your data........

  • PHP Issues With Decoding Strange Smart Quotes And Non-Standard ASCII Characters


    When using strip_tags and html_entity_decode with PHPit often breaks and produces annoying diamonds with question marks. It is probably because of characters like these: … (looks like 3 dots but it is a single weird character). ’ (looks like a normal apostraphe but it is not) ” (looks like a normal double quote but it is not). An easy way to sort this out is to copy the above and search in an ASCII table to extend the functional........

  • bind named error solutions named[2169]: error (no valid DS) resolving / error (broken trust chain) resolving / : error (no valid RRSIG) resolving 'com/DS/IN':


    Below are the common errors you'll get with named AKA bind if your time is incorrect. The simplest solution is to install and run ntpd to correct your system's time (install ntpd if it is not installed) systemctl start ntpd systemctl enable ntpd Dec 20 13:36:16 hostingbox named[2169]: error (no valid DS) resolving 'develop.waxrain.com/A/IN': 14.215.150.17#53........

  • mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument solution


    mdadm --manage /dev/md125 -a /dev/sdb4 mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument Dec 19 01:23:48 storageboxtest kernel: [ 2328.854491] md: sdb4 does not have a valid v1.2 superblock, not importing! Dec 19 01:23:48 storageboxtest kernel: [ 2328.854499] md: md_import_device returned -22 #zero the superblock and try again! mdadm --zero-superblock /dev/sdb4 mdadm --ma........

  • Linux named / bind how to dump, view and clear the cache!


    Do you hate it when your ISPhas old cached records because of a high TTLon the DNS record of the relevant domain? In plain English this means you often can't connect to a site or service because your ISP's DNS servers haven't gotten word of the new IP address (probably because they haven't checked). There are also some that are notorious for ignoring TTL and not updating records for days! But if you are lucky and smart enough to have your own Linux based DNS se........

  • Adobe Acrobat Reader for Linux to use and view XFA Fillable Forms


    The reason for not being able to read one of these dreaded/ fillable "XFA" forms is because no Linux PDF reader that I'm aware of supports them. Part of this reasoning is for security. It is really silly, they should ban these XFA forms or at least replace the Please Wait with the non-fillable version. Download Adobe Reader 9.5 for Linux from here: This is the solution but only so much, at least for me I was able to view th........

  • Why SMART is not smart at all and doesn't properly predict disk errors that cause a kernel panic or crash


    Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated. It has caused a kernel panic and system crash repeatedly as we can see from the logs. But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector. Any time I have had anything but 0 for that attribute it........

  • VirtualBox How To Add iSCSI Storage using VBoxManage


    #to show all VBoxManage list vms #show ONLY running vms VBoxManage list runningvms VBoxManage storageattach test --storagectl "SATA" --port 0 --device 0 --type hdd --medium iscsi --server 192.168.1.91 --target "iqn.2018-12.local.abcrandom.target:sdb" --initiator "iqn.1982-01.ca.bla.tld:abc123" --t........

  • iSCSI on Centos 7 Configuration and Setup Guide for Initiator and Target


    initiator = client target = server These are the first concepts you should understand which is that in iscsi essentially the "initiator" is the client and the "target" is the server. iSCSI is derived from the old fashioned SCSI that us oldtimers grew to love. The "i" stands for Internet and the SCSI stands for "Small Computers Systems Interface" (SCSI). iSCSI Target (Server)Setup targetcli is the pac........

  • Python and BeautifulSoup4's BS4's Decompose Method To Remove Unwanted Inner Tags


    < a href="/Products/MX72244"> < span class="c-shca-icon-item__body-name-brand"> ADATA < / span> &nbs........

  • How Does Cisco CUCM (Cisco Unified Communication Manager) Work?


    Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments. Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........

  • What DNS Options Does Active Directory Offer in Windows Server 2008,2012,2016 ?


    What Is Active Directory? Active Directory is essentially an enhanced, centralized database with a set of objects that make user management, authorization, and data management simpler. Active Directory is synonymous with "Domain Controllers" where a single "domain" often consists of multiple sites and members of the domain. Multiple domains can also be joined to belong to a tree ( a collection of domains). And the highest layer is the forest whi........

  • bash script how to to check LAN computers for open ports


    In this case it just searches for port 80 it is fairly handy if you have some sort of appliance or something else you aren't sure of the IPof Of course change the port 80 port to whatever port(s) you want. for ip in `arp -n|arp -n|tail -n +2|head -n -1 |grep -v incomplete|awk '{print $1}'`; do echo "checking $ip:80" nc -w 1 -z $ip 80 if [ "$?" == 0 ]; then echo "**Port 8........

  • systemd management using systemctl and journalctl to check systemd logs


    systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system. The key commands or arguments you will use with systemctl are the following: Unit Commands: list-units [PATTERN...] List loaded units &nbs........

  • AMD Set Fan Speed and Other Powerplay Memory/CPU Timings with a Linux script


    You can do other things but this particular script is just to set all AMD cards to 80% fan speed (remember this script needs to applied everytime you reboot). You could set it is a cron or just throw it into /etc/rc.local basepath=/sys/class/drm for hwmon in `ls -1 /sys/class/drm|grep card[0-99]$`; do echo card=$hwmon; hwmonname=`ls $basepath/$hwmon/device/hwmon|grep hwmon[0-99]` hwmonpath=$basepath/$hwmon/device/hwmon/$hwmonname echo "ec........

  • Ethereum Mining Claymore Nanopool Error


    This happens if you don' have an updated version normally(eg. things were working fine and you suddenly get this error): Pool sent wrong data, cannot set epoch, disconnect ETH: Connection lost, retry in 20 sec... ETH: Connection lost, retry in 20 sec... Solution - Download an updated Claymore! ........

  • Linux Kernel USB Export Errors


    4.374647] usb_common: exports duplicate symbol usb_get_dr_mode (owned by kernel) [ 4.403334] usbcore: exports duplicate symbol __usb_get_extra_descriptor (owned by kernel) [ 4.427736] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 4.427844] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 4.429040] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810 [ 4.429141] xhci_hcd 0000:00:15.0: cache line size of 64 is not sup........

  • How to download gajim 0.16.9 XMPP/Jabber client so you can use OMEMO encryption


    #Linux Mint 18.2 how to install gajim .16.9 so you can use OMEMO encryption: sudo apt-get install python-axolotl python-nbxmpp wget https://gajim.org/downloads/0.16/gajim-0.16.9.tar.gz tar -zxvf gajim-0.16.9.tar.gz cd gajim-0.16.9 ./autogen.sh ;make;sudo make install #if you get this error you need to get a newer python-nbxmpp from here: gajim Gajim needs python-nbxmpp >= 0.6.1 to run. Quiting...........

  • HP DL385 G7 Linux BIOS Update Flash


    wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe --2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85 Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1525561 (1.5........

  • hwloc-nox set CPU affinity in Linux


    sudo apt-get install hwloc-nox Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: hwloc-nox 0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded. Need to get 151 kB of archives. After this operation, 453 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubunt........

  • gvfs mount in /run/user cannot be accessed or displayed wrong permissions Error: Location is already mounted


    You get errors like below and see you have all question marks for the permissions if you go to /run/user/1000/gvfs If you try to access the mounted share such as anything mounted as gvfs like an SSH share in your file manager you may get an error like this. It generally means an interruption in communication or a fault with gvfsd has caused it. Solutio........

  • VMWare vSphere 6.7 Errors Solution 503 Service Unavailable (Failed to connect to endpoint:


    503 Service Unavailable (Failed to connect to endpoint: [N7Vmacore4Http20NamedPipeServiceSpecE:0x00005556ba09c070] _serverNamespace = / action = Allow _pipeName =/var/run/vmware/vpxd-webserver-pipe) 503 Service Unavailable (Failed to connect to endpoint: [N7Vmacore4Http16LocalServiceSpecE:0x00007fd26000b240] _serverNamespace = /ui action = Allow _port = 5090) Errors like the above are usually because there is an issue with your vSphere or more commonly it i........

  • Supermicro IPMI / KVM / BMC Remote Console Screen Resizing Issue - Window Cut Off Solution


    It could just be my specific Java but other KVM/IP works ok on my machine but with Supermicro's IPMI for some reason the console window doesn't resize and even putting it in full screen leaves the window cut off as shown below: As you can see above the screen is cut off you can't see the "Iagree" on the right side. The window resi........

  • Linux bash shell doesn't show username, hostname or current path fix solution


    Usually this is because when you created your user you added a user but didn't create their home directory and/or for some reason your .bashrc and .bash_profile in ~ (home) is broken/missing. In your home just create the following files with the following content to solve it: .bashrc and .bash_profile. To apply it just relogin/start a new bash session # .bash_profile # Get the aliases and funct........

  • zenity popup messages, windows, dialogs, error messages calendars and more howto on Gnome Linux including Ubuntu, Linux Mint, Centos and more


    zenity is a nice utility as part of the gnome window manager that allows you to script from bash and retrieve the input from the user. It could also be helpful in just notifying a user when they login with a popup window. I'll give an overview of what's available with zenity: Application Options: --calendar Display calendar dialog --entry Display tex........

  • Debian/Ubuntu/Mint Linux How To Set VLAN in /etc/network/interfaces


    You can find many ways to specify the VLANin your network configuration but Ifind this is the simplest and quickest. In this case we are talking about a bridged adapter "vmbr0" but it works even if you just had a normal non-bridged interface. The key here is that in vmbr0 you'll notice there is no IP address. We just specify "manual". Below it is a similar stanza for "vmbr0.58" in this case 58 represents the VLAN (change........

  • VMWare ESXi 6.7 SSH/PowerShell CLI Commands


    [root@localhost:~] BootModuleConfig.sh echo host-ind nfcd........

  • VMWare Vsphere VCSA Graphical Install Creates json


    yes it does create its own json ============================================ cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json 2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1 --> ........

  • gmail.com address failing in Postfix


    Aug 10 01:11:54 mailserver postfix/smtp[6180]: 020AE17C2BD1: to=, relay=none, delay=0.29, delays=0.28/0/0/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=gmail.con type=A: Host not found) A user complained that their e-mails weren't being delivered but they actually made a small typo and used gmail.con so it wasn't working as expected of course........

  • Debian Mint Ubuntu compiling xmr-stak


    sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3 sudo apt-get install libcurl4-gnutls-dev git clone https://github.com/wolf9466/cpuminer-multi sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev git clone https://github.com/fireice-uk/xmr-stak-cpu.git make install cd bin chmod +x xmr-stak-cpu ./xmr-stak -O xmr........

  • migration/4 migration 4 is using too much CPU


    top - 13:02:52 up 603 days, 19:19, 2 users, load average: 5.01, 4.15, 3.44 Tasks: 604 total, 5 running, 599 sleeping, 0 stopped, 0 zombie Cpu(s): 17.7%us, 36.1%sy, 0.0%ni, 42.0%id, 4.1%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 16278908k total, 4269684k used, 12009224k free, 119672k buffers Swap: 8k total, ........

  • Ethereum Client Errors


    INFO [07-19|12:11:51] Imported new block receipts count=590 elapsed=8.440s bytes=74117699 number=4870906 hash=6bc60b…934753 ignored=0 INFO [07-19|12:11:57] Imported new state entries count=499 elapsed=9.963ms processed=71076 pending=1526 retry=2&nbs........

  • PayPal IPN Failed "result: IPN Handshake Invalid"


    This is often the result of PayPal's "item name" or another name having invalid characters or not supporting Unicode. 173.0.81.1 - - [17/Jul/2018:13:39:45 -0400] "POST //modules/gateways/callback/paypal.php HTTP/1.1" 406 - "-" "PayPal IPN ( https://www.paypal.com/ipn )" A good clue is if you check the debug output of the IPNand find a mandatory column empty. ........

  • Linux Centos 7 HowTo Install Yarn


    https://yarnpkg.com/lang/en/docs/install/#centos-stable curl --silent --location https://dl.yarnpkg.com/rpm/yarn.repo | tee /etc/yum.repos.d/yarn.repo If you need node.js: curl --silent --location https://rpm.nodesource.com/setup_6.x | bash - yum install nodejs yarn........

  • Centos 7 - How To Install NFS and Mount Remotely


    Server Side Config 1.) First install nfs-utils yum -y install nfs-utils 2.) Configure nfs share Create a directory for your NFS share mkdir /datastore Create your NFS share in /etc/exports echo "/datastore 10.220.101.0/24(rw,sync,no_root_squash)" >> /etc/exports systemctl restart nfs........

  • wodim / cdrecord error cannot burn DVD or BDR .iso Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error


    dvd+rw-mediainfo /dev/sr0 INQUIRY: [ASUS ][BW-16D1HT ][3.00] GET [CURRENT] CONFIGURATION: Mounted Media: 11h, DVD-R Sequential Media ID: RITEKF1&n........

  • linux mint image convert menu option missing solution


    Ialready have the caja-image-converter option installed but it shows nothing. Weirdly enough if you install nemo and nautilus converter it does show and work inside caja: The solution is to install *-image-converter sudo apt-get install *-image-converter Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'n........

  • Linux Mint 18 Screen Goes Dark or Black After Screensaver or even when using the Desktop Solution


    You can search for this bug and it seems like it may be related to ecryptfs and is many years old. The symptoms are that you return to the computer and the screensaver was active or the screen was asleep/black and it doesn't seem to come back. But you check by SSH the computer is running fine and are frustrated you'll lose your running programs and have to reboot. There is a simple solution: Ctrl + Alt + F1 Ctrl +Alt + F8 Ba........

  • iptables guide and examples and howto


    iptables allow port 22 example Of course change --dport and -s to suit your needs #allow certain IP to access port 22 iptables -A INPUT -p tcp -m tcp --dport 22 -s 192.168.1.0/24 -j ACCEPT # block others iptables -A INPUT -p tcp --dport 22 -j DROP........

  • Postfix How To Change Sending IP Address To Specific IP Binding or Interface


    Ithought I'd post this becuase there is some bad information out there. Some guides tell you to edit /etc/postfix/master.cf (-o smtp_bind_address=) but this doesn't work. The same guide also says if you don't change it there you end up changing the listening IP/bind interface which is also not true. Here is a simple and effective way to change Postfix's sending/binding/outgoing IP address (very important for reverse DNS and so mail servers don't block you)........

  • How to qemu-kvm enable bridged networking in Debian Ubuntu Linux Mint on KVM containers


    I've read a few guides about this but they didn't work for me. sudo apt-get install bridge-utils #don't think the above is enough it won't work still even though you have by default an /etc/qemu-ifup that handles it if you have the right tools and setup sudo qemu-system-x86_64 -net tap -net nic -enable-kvm -cpu host,vmx=on ~/VirtualBox VMs/vsphere-vcenter/vsphere-vcenter.vdi W: /etc/qemu-ifup: no bridge for guest interface foun........

  • VirtualBox Nested Virtual Machine Containers with KVM Not Working no SVM or VMX module in the guest


    I can't get vmx cpu extensions to show up in Virtualbox guests despite enabling nested paging and enable vmx in virtualbox guest but this doesn't help that you check VT-X or the AMD Virtualization SVM it enables it for the guest to use BUT does not pass it through. This means if you check cat /proc/cpuinfo in the guest you will see the CPUdoesn't support virtualization. It looks like VirtualBox still hasn't implemented this! But there is good news I&n........

  • OVF Tool: Error: Task failed on server: This host does not support Intel VT-x. VMWare VCenter install On ESXi ERror


    Intel VT-X is enabled in Virtualbox but it doesn't seem to pass through the needed vmx extension despite the following variables on the host confirming it is enabled: cat /sys/module/kvm_intel/parameters/nested Y cat /sys/module/kvm_intel/parameters/ept Y OVF Tool: Disk progress: 99% OVF Tool: Transfer Completed OVF Tool: Powering on VM: Embedded-vCenter-Server-Appliance- OVF Tool: Task p........

  • Install NFS (Network File System) On Debian Linux Ubuntu Mint Howto


    sudo apt-get install nfs-kernel-server #oops there are no exports so it won't startsudo /etc/init.d/nfs-kernel-server start* Not starting NFS kernel daemon: no exports. #we will use the /tmp/nfstestshare directory for our NFS share mkdir /tmp/nfstestshare #add it to /etc/exports (basically what NFS checks to determine what to make an NFS share) /tmp/nfstestshare 192.168.1.5(rw,sync,........

  • Relocating modules and starting up the kernel - VMWare ESXi 6.7 Error and Solution


    I had this error in an unsupported CPUon VMWare 6.7 and apparently this sometimes works especially on older VMWare versions like 6.5 5.5 etc (but in my case it did not). To make sure it proceed when you see "Loading VMWare" Hit "Shift+O" Then add "ignoreHeadless=TRUE" See an example below:........

  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........

  • vino server error cannot login


    10/07/2018 03:05:14 PM [IPv4] Got connection from client10.10.25.1 10/07/2018 03:05:14 PM other clients: 10/07/2018 03:05:14 PM Client Protocol Version 3.7 10/07/2018 03:05:14 PM Advertising security type 18 10/07/2018 03:05:14 PM Client returned security type 18 10/07/2018 03:05:14 PM TLS Handshake failed: Could not negotiate a supported cipher suite. 10/07/2018 03:05:14 PM Client10.10.25.1 gone 10/07/2018 03:05:14 PM Statistics:........

  • Cannot create gradle for conversations


    The main issue is it looks like Java is not configured to accept the invalid ssl cert that is coming from the download location. Exception in thread "main" java.lang.RuntimeException: javax.net.ssl.SSLException: java.security.ProviderException: java.security.InvalidKeyException: EC parameters error export ANDROID_HOME=/home/user/Downloads/tools/ Conversations-master$ ./gradlew Downloading https://services.gradle.org/distributions/grad........

  • postfix errors fatal: no SASL authentication mechanisms /usr/libexec/postfix/smtpd: bad command startup -- throttling solution


    Jul 3 22:12:17mailserver postfix/smtpd[6195]: fatal: no SASL authentication mechanisms Jul 3 22:12:18mailserver postfix/master[4881]: warning: process /usr/libexec/postfix/smtpd pid 6195 exit status 1 Jul 3 22:12:18mailserver postfix/master[4881]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling This only ever happens in my experience when the authentication method is actually Dovecot. Usually the problem........

  • Linux Mint Black Screen after boot no graphics solution


    This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help. Here is the short end of the stick that fixed it: sudo apt-get install mdm mate-desktop-environment Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........

  • Mozilla Firefox Address Bar History Not Working places.sqlite corruption solution database repair


    Here is the only solution Ifound that works in Firefox: *Note you could basically just copy all of the commands in bold (the rest just shows the output) Install sqlite3 sqlite3 places.sqlite sqlite> .clone places.sqlite-fixed moz_places... done moz_historyvisits... done moz_inputhistory..........

  • Centos PXEBoot NetInstall Failure - Pane is dead


    ValueError: new value non-existent xfs filesystem is not valid as a default fs type Pane is dead From what Iread this is misleading and has to do with the fact that the initrd and kernel are mismatched. This is a hard situation because for some older hardware Iam using the Centos Plus kernel which has modules that Irequire for an older server/NIC. This seems to have cropped up in the past few months and there is no simple fix........

  • Linux Ubuntu Mint Debian cannot play xvid,x264,mp4 or any videos codec issue - xplayer Could not initialize supporting library.


    In xplayer Iget the following error "Could not initialize supporting library.". It actually looks more like a gstreamer issue. For those wondering what the default video player is called it is "xvid" and not "totem" anymore like previous versions. Basically it looks like some codecs are missing when I uninstalled another program it uninstalled other programs and codecs that it shouldn't have. I've tried installing all the gstre........

  • MySQL How To Grant Access To ALL Databases For Export and Backup Purposes


    GRANT SELECT, LOCK TABLES ON *.* TO yourmysqluser@localhost; All you need to do a full MySQL dump on all databases is the SELECT and LOCK TABLES privileges. This way you don't have to use the mysql root user. Data could be compromised this way but at least no harm from manipulation, changes or deletion are possible by locking down the privileges to the minimum for a full MySQL dump and backup.........

  • Apache htaccess Custom ErrorDocument not working properly for root home page 403 Error Issue and Solution


    So I have a domain "testdomain.com". Inside test domain.com's root is the following .htaccess: Options +FollowSymLinks -Indexes ErrorDocument 403 /launch/index.html Order Deny,Allow Deny From All Allow From 192.168.1.2 When you visit anything other than root things work fine. Eg. if you visit http://testdomain.com/somedirfile.html It will show the right error in /launch/........

  • samba how to listen on specific IP only


    This is useful for security purposes especially on a server which may have a public IP assigned to it but has a second NIC for the LAN. Here is how you edit smb.conf: [global] interfaces = 192.168.1.50 bind interfaces only = yes As you can see above it will only listen on 192.168.1.50 and remind to keep the "bind interfaces only"option.........

  • OpenVZ Solutions vzquota : (error) Can't open quota file for id 123123, maybe you need to reinitialize quota: No such file or directory


    Error: Unable to apply new quota values: quota not running Container start failed (try to check kernel messages, e.g. "dmesg | tail") Killing container ... Container was stopped Error: Unable to apply new quota values: quota not running Can't umount /vz/private/123123: Invalid argument [root@rtt 123123]# vzquota on 123123 vzquota : (error) Can't open quota file for id 123123, maybe you need to reinit........

  • "Object of class WP_Term could not be converted to string"


    Normally when I've seen this it's when you are using a variable like a normal string when in fact it's actually an array such as this example: [Tue Mar 13 04:22:35 2018] [error] PHP Catchable fatal error: Object of class WP_Term could not be converted to string in /vhost/httpdocs/wp-content/plugins/wp-instagram-post/classes/class-woo-igp.php on line 578 &nbs........

  • Wordpress Instagram Post Modify Plugin To Add Tags


    I modified this code after quickly learning how Wordpress plugins actually work, how they're called etc.. was the first trick to modifying the code to add tags. Add this code after line 570 in wp-content/plugins/wp-instagram-post/classes/class-woo-igp.php &nb........

  • Linux input/output error invalid program cannot read data on some CD-Rs and DVD-Rs on ASUS BW-16D1HT


    I've never seen this before in all of my years. Ihave some very old CDs and DVDs 12-15 years old that seem not to work in this BD-R/DVD-R/CD-R Asus drive. The discs are fine actually and ironically they even work fine on a normal LG USB based BD-R drive! Here are the errors in Linux: [2914936.884924] attempt to access beyond end of device [2914936.884927] loop1: rw=0, want=730424, limit=688384 [2914954.556873] attempt to........

  • Centos How To Update to Glibc 2.14 Plus


    Centos 6 requires GLIBC 2.12 however a lot of new programs you would want to compile may need a newer glibc. You can't remove the old glibc since the whole OS is based on it but you can install the updated glibc alongside it and do an export pointing to your updated GLIBC. mkdir ~/glibc_install; cd ~/glibc_install wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz........

  • tftp: client does not accept options - solution if you are using UEFI PXEBoot disable it!


    tftp: client does not accept options I spent the good portion of a late evening on this double checking settings that I know always worked right for tftp! This error can also happen if you are trying to boot PXE in UEFImode. Enter your BIOS and change it to "Legacy PXE" or non-UEFI PXE mode and you'll be good to go!........

  • Linux how to view video card make and exact model


    Normally lspci will show you just like this and would suggest they are exactly the same card: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) 1c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) lspci -vnn is the answer As we can see one is a Gigabyte and the other is an MSI card. Wha........

  • h264 DVR security camera footage cannot be played


    This is not just a Linux issue but a general issue most software or hardware players cannot play the resulting exported/backed up format of .h264 from DVR security camera footage for some silly reason. There is a simple solution in Linux using ffmpeg fortunately. Convert the .h264 file into mp4 ffmpeg -i yourfile.h264 -codec copy video.mp4 play dvr .h264 file........

  • css responsive images


    add this style="background-size: contain;max-width: 100%; height: auto;" to your img code. Example: ........

  • responsive table without changing much code solution


    So you've got a responsive site with tables but it breaks them so anything not viewable on the screen is now cut off. Here is a simple solution that will allow users to scroll horizontally so they can see the whole table: &........

  • yum how to install old obsolete packages


    This is important as unfortunately Centos may designate a package obsolete and the replacement breaks everything (eg. you have a config file and the new replacement is not at all compatible with it and it breaks your application). This is where disabling obsoletes comes into play, it can be done from yum but it doesn't work at the time I find. yum --setopt=obsoletes=0 install someapp However Ifind it still installs the new app and not the one you ask for........

  • M2Crypto.SSL.Checker.WrongHost: Peer certificate subjectAltName does not match host, expected fedora-archive.ip-connect.vn.ua, got DNS:mirror.ip-connect.vn.ua


    You are using Centos 5 which is deprecated so nothing in yum will work until you follow this post to use the vault: http://realtechtalk.com/Centos_59_Working_Vault_Repo_file-1921-articles yum update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * epel: fedora-archive.ip-connect.vn.ua Traceback........

  • l2tp ipsec VPN Error Sep 12 18:16:25 vps pluto[7299]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 192.5.6.2 port 20640, complainant 192.5.6.2: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated


    Sep 12 18:16:25 vps pluto[7299]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 192.5.6.2 port 20640, complainant 192.5.6.2: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Some say changing the "leftprotoport=17/%any" will fix this but I have not found this to be the case. Essentially it means at least one end is blocking the ipsec packets. Sometimes the %any allows an alt........

  • Centos 5.9 Working Vault Repo file


    Centos 5 is not supported running yum will produce an error like this: YumRepo Error: All mirror URLs are not using ftp, http[s] or file. Eg. Invalid release/ removing mirrorlist with no valid mirrors: /var/cache/yum/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base Solution - Update this file CentOS-Base.repo # CentOS-Base.repo........

  • Linux Mint/Ubuntu/Debian apt how to downgrade a package


    First of all check to see which version if any you have available for a downgrade: apt-cache showpkg packagename Downgrade/Install old package: apt-get install package=version Example apt-cache showpkg caja Package: caja Versions: 1.10.3-1+rafaela (/var/lib/apt/lists/packages.linuxmint.com_dists_rafaela_import_binary-amd64_Packages) (/var/........

  • kdenlive titles/text renders as white screen when using .sh script


    When using the .sh script the rendering doesn't work after an upgrade of related packages to kdenlive. kdenlive (kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1)) with affine or composite transitions was fine but is now broken during the time of transition it is just a white screen. The previous version was fine: kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1 But now I can't find it or install it:........

  • [1035724.274610] [drm:intel_pipe_update_end [i915_bpo]] *ERROR* Atomic update failure on pipe A (start=62076478 end=62076479) time 102 us, min 894, max 899, scanline start 893, end 900 W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1.bin


    [1035724.274610] [drm:intel_pipe_update_end [i915_bpo]] *ERROR* Atomic update failure on pipe A (start=62076478 end=62076479) time 102 us, min 894, max 899, scanline start 893, end 900 W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1.bin for module i915_bpo I've been getting those errors on a J3455 NUC box with the latest kernel on Linux Mint 18.2. When updating the initramfs I also got the error about the firmware........

  • ffmpeg trouble concatenating similar but different files


    When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right. Solution for me: My example uses 3 videos in total so "n=3" and a=1 to include audio. ffmpeg -threads 12 -i file1.mp4 -........

  • ffmpeg Unable to Use Hardware Encoding with Nvidia 3.40 Driver and GT210 card


    I believe from what I've read that this card's driver doesn't support the features after trying all known troubleshooting methods. ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload -c:v hevc_nvenc -profile main -preset slow -rc vbr_hq -c:a copy uservideoRendered.mp4-test ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload........

  • Linux Mint USB Kernel Tainted and Locked Port/Dev File


    Essentially a program I was running for mining did not terminate properly with Ctrl+C it is listed as defunct and cannot be killed, kernel is tainted and normal tricks to disable the port are impossible the dev and sys entries for the device cannot be browsed or interacted with in any form without a lockup of the request. The only solution is to reboot due to the kernel taint as far as I can find so far. [1130246.811056] INFO: task minerd:21861 blocked for more th........

  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd ffmpeg-3.3.2/ ./configure --disable-yasm install prefix /usr/local source path ........

  • Migrate Centos 7 from Single HDD to mdadm RAID 10 array:


    Done on Centos 7.3 very important as clearly based on older guides it was a lot easier and more simpler! Hint do not use grub2-install! If you have trouble booting after this check this CentOS mdadm RAID booting/fixing guide. One huge caveat if you are an oldschool user or sysadmin who has avoided UEFIbooting The nor........

  • USB 3.0 External HDD Enclosure Seagate UAS problems - [sdd] tag#1 CDB: Write(16) 8a 00 00 00 00 01 70 04 08 68 00 00 00 08 00 00


    This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether. Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........

  • Centos 7 Cudaminer Nvidia setup guide


    I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us yum install automake curl openssl-devel libcurl-devel gcc gcc-c++ yum -y install kernel-devel-`uname -r` yum -y install unzip #the........

  • USB 3.0 PCI x1 Card Review VIA VL805 on Linux Review and Experience


    This is a VIA made VL805 USB 3.0 Chipset with 4-ports and MOLEX powered. First of all this unit was cheap at about only 9 USD with fast shipping. My biggest concern was if this was a quality unit and would it really give you full USB 3.0 speeds (some people reported with similar cards that for some weird r........

  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........

  • USB Device/MP3 Player not working properly and can't browse the device filesystem? Check the cable twice and again!


    Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues. Take for example the error messages from Linux Mint: [804829.895414] usb 1-1: USB disconnect, device number 11 [806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........

  • Nvidia Linux Mint/Ubuntu screentearing horizontal line solution


    Finally after ages I found the solution which is on many pages on the net but not obvious and should have been standard or more common info! Instant Solution: Type this into the terminal (unfortunately the driver config menu doesn't have the option as itis hidden): nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceCompositionPipeline = On }" Make permanent Cli........

  • Openshot 2.2 is very unstable always crashing in Linux Mint 18.1!


    Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user: Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4 Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........

  • Track 01: 34 of 1726 MB written (fifo 100%) [buf 99%] 3.6x.Errno: 5 (Input/output error), write_g1 scsi sendcmd: cmd timeout after 1.897 (40) s CDB: 2A 00 00 00 44 A9 00 00 1F 00 resid: 6144 cmd finished after 1.897s timeout 40s write track da


    These errors believe it or not are simply because of not being the root user or running with sudo! However if you didn't know to try as root you'd think there was a problem with your burner or disc Essentially it looks like without root you cannot send the required scsi commands to continue writing. Ithink cdrecord should have built-in tests or safeguards to see if it has the permissions to run the required commands. I guess for more advanced users the idea is simila........

  • Transaction Check Error: file /usr/lib64/php/modules/fileinfo.so conflicts between attempted installs of php-pecl-fileinfo-1.0.4-2.el6.rf.x86_64 and php-common-5.3.3-49.el6.x86_64 solution


    Transaction Check Error: file /usr/lib64/php/modules/fileinfo.so conflicts between attempted installs of php-pecl-fileinfo-1.0.4-2.el6.rf.x86_64 and php-common-5.3.3-49.el6.x86_64 solution you can't install php-pecl-fileinfo it seems to be incompatble with the php5.3 being installed: yum --exclude=php-pecl-fileinfo --skip-broken --disablerepo=epel install php-*........

  • Linux Mint Install Netboot PXE Guide Howto


    *Update so this doesn't work it must be something to do with the path of nfs or something else but the installer fails with "Installer crashed" at the end whereas with the CD/USB it works. This assumes you've already installed and configured a separate PXE/DHCP server somewhere else and your /tftpboot directory is setup. This is for Linux Mint 18.1 but generally applies to most versions although you may have tro change things like "casper"........

  • strange vi errors in Linux Mint/Ubuntu line 58: E488: Trailing characters: t_Sbet line 63: E171: Missing :endif


    This happens on any file an even just typing "vi"whereas it never happened before. I suspect an update or environment variable is causing this issue When entering vi I get this weird stuff line 58: E488: Trailing characters: t_Sbet line 63: E171: Missing :endif When exiting vi I get this weird stuff t_Sb=^[[4%?%p1%{1}%=%t........

  • Linux shows my drive as being dead is it really? Buffer I/O error on device sdb, logical block 0 sd 3:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00


    Normally the below would indicate a failing or failed drive. In this case the SATA port was unplugged and sometimes the Linux kernel/motherboard even with AHCIjust don't play nice and can't handle it. What happened is Iplugged in a new drive after removing another one. However the log shows that after the old drive was plugged in the Linux kernel kept complaining thinking the drive was there but not responding properly. This continued even with reseating........

  • Linux Mint missing ffmpeg solution to install from Ubuntu PPA


    This is very annoying that ffmpeg is missing from Linux Mint! They have ffmpeg2theora which is a totally different codec and does not work as ffmpeg does at all (it is basically totally different). However on Linux Mint 17 I was able to use a Ubuntu PPA and sucessfully install ffmpeg! https://launchpad.net/~mc3man/+archive/ubuntu/trusty-media Adding this PPA to your system........

  • phpBB3 slow and internal dummy connection


    Using Apache 2.2 and PHP5.6 PHPBB3 is very slow to respond. Actually for some reason it takes so long to even register a log entry in access_log as in several seconds or a few minutes later it shows up in Apache. All other vhosts and Apache access stops working and freezes until the request to access PHPBB3 slowly completes. It seems to randomly be slow if you stop using it whether for posting or reading the forums. I've migrated to different machines including........

  • ssh forward multiple ports in the same connection and command even works with NAT!


    You can actually just pass multiple "-L" statements to achieve this. An example is as below: ssl -L 80:192.168.10.5:80 -L443:192.168.10.5:443 -L2068:192.168.10.5:2068 -L 8192:192.168.10.5:8192 user@remotehost.com The above essentially is saying forward ports 80,443,2068,8192 to the remote IPof 192.168.10.5 (even though it is behind NAT). Essentially SSH will do the NAT part even if the........

  • Avocent DSR8020 KVM/IP - Network Connect Error - Solution


    This error is commonly due to Java security or TLS settings but there is a second issue with forwarded ports that also causes it. 1. Java Security/TLS Settings issue: This article has the solution to change them all in Linux automatically 2. Port Forwarding Issue if your Avocent DSR is behind NAT/private IP........

  • Linux how to whois query other gTLDs such as .club solution


    whois in Linux is incredibly out of date and does not seem to recognize most new TLDs domains, but there is a quick and easy tip/hack/tweak for this. An example of new TLD's site as .review .site .club whois somesite.club No whois server is known for this kind of object. bash to the rescue Now I did try to apply this in .bashrc but DONOT! Ithink the * wil........

  • What happens when you unplug 1 or more devices from an mdadm RAID array to simulate a failure in Linux Ubuntu/Centos/Debian?


    In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below. mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore. [45817.162728] ata4: exception........

  • Migrating from Linux Mint 17.2 mdadm RAID array to a new one (because I upgraded to larger drives).


    1.) Replicate the number of partitions in your new drives. gdisk /dev/sda gdisk /dev/sdb I created 3 partitions of the same same size. partition #1: +1G (/boot) partition #2: +60G (swap) partition #3: rest of it (/) #note if you are using GPT/gdisk you need to create separate a partition at least 1MB in size (in my case I would a 4th partition and mark it type ef02).........

  • Linux how to reformat html file code solution


    The solution is simply "tidy"/Tidy-HTML. It will take your poorly formatted HTML code (and I mean files that span just a few lines that are unreadable) and fix it up. Note the command below does everything in place. *Make sure you take a backup of all .html files* It also seems to break html5 code/templates so beware. tidy -im yourfile.html An automated way in bash:........

  • Using a proxy with yum in Centos 6


    Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 12: Timeout on http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds') Error: Cannot find a valid baseurl for repo: base You would think this should be fine and simple like using a proxy with most other software? However........

  • mdadm frozen and doesn't realize array is dead/missing failed due to unplugged drives


    This was a surprising bug but I unplugged all drives for an array md127. At first it was just 1 drive and mdadm seemed to notice this. I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it. This created problems trying to unmount it or even to stop this array with mdadm freezing. As for how to fix it I can only think of making sure you are not in a mounted path of........

  • curl: (1) Protocol "https not supported or disabled in libcurl"


    This seems to only happen from a bash script but it's not clear why it works from the terminal but not from a bash script.........

  • DRBD Split-brain solution


    Uh oh [17925926.174277] block drbd0: Handshake successful: Agreed network protocol version 96 [17925926.174325] block drbd0: conn( WFConnection -> WFReportParams ) [17925926.174342] block drbd0: Starting asender thread (from drbd0_receiver [1682]) [17925926.174432] block drbd0: data-integrity-alg: [17925926.174581] block drbd0: drbd_sync_handshake: [17925926.174586] block drbd0: self 2AAE66AF9252D6DB:2815BF........

  • How to Properly Secure SSL/TLS Apache Settings against Heartbleed Poodle (TLS) Poodle (SSLv3) FREAK BEAST CRIME


    Many users still are not aware but simply patching OpenSSL does not secure you against many known and easy to exploit attacks that will render your encryption useless by an attacker. Use the following setings in /etc/httpd/conf.d/ssl.conf SSLCipherSuite "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH EDH+aRSA !CAMELLIA !SEED !3DES !RC4 !aNULL !eNULL !LOW !MD5 !EXP !PSK !........

  • K9 Mail Android Cannot See or View E-mails Disappear after reading - with Dovecot server. Solution


    This actually only happened after an e-mail server ran out of space due to run away log files. Normal Desktop clients were not affected. It appeared to be a bug in K9 mail but even reinstalling/wiping all settings did not fix it (read e-mails would still not reappear). This is moreso a bug in Dovecot where it probably messes up the index files. How do you fix this in Dovecot/your e-mail server? You need to delete the do........

  • ERROR 2013 (HY000): Lost connection to MySQL server during query


    The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files. UPDATE user SET password=password("newpass") WHERE user='root'; flush privileges; ERROR 2013 (HY000): Lost connection to MySQL server durin........

  • cPanel Install Error kernel ipv6 module support solution


    2017-01-12 14:25:36 529 (ERROR): The installer was unable to verify that your kernel supports IPv6. 2017-01-12 14:25:36 530 (ERROR): The message received when trying to create an IPv6 socket was Address already in use 2017-01-12 14:25:36 531 (ERROR): Please ensure that the ipv6 module is enabled and loaded in your kernel. 2017-01-12 14:25:36 532 (FATAL): Exiting... Solution This happened........

  • PYCURL ERROR 22 - The requested URL returned error: 404 Not Found Solution


    # yum -y install qemu-kvm Loaded plugins: fastestmirror Setting up Install Process Loading mirror speeds from cached hostfile * base: mirror.lzu.edu.cn * elrepo: ftp.utexas.edu * epel: ftp.jaist.ac.jp * extras: mirrors.aliyun.com * openvz-kernel-rhel6: mirror.fdcservers.net * openvz-utils: mirror.fdcservers.net * updates: mirrors.nwsuaf.edu.cn Resolving Dependencies........

  • ADATA SU800 256GB 3D NAND Flash SSD Test & Review


    I keep reading these drives are slower, but they are cheap and still SSDand work very fast for my needs. As you can see the sequential read is 481-491MB/s, if I put them in MDADM RAID10 mode (normal RAID1) they should give me well over 900MB/s and with redundancy and being very cheap for what they offer. [1232206.315622] scsi 8:0:1:0: Direct-Access ATA ADATA SU800&........

  • iptables how to forward localhost port to remote public IP


    iptables -t nat -A OUTPUT -m addrtype --src-type LOCAL --dst-type LOCAL -p tcp --dport 3306 -j DNAT --to-destination ip.ip.ip.ip iptables -t nat -A POSTROUTING -m addrtype --src-type LOCAL --dst-type UNICAST -j MASQUERADE sysctl -w net.ipv4.conf.all.route_localnet=1 Make sure you substitute "ip.ip.ip.ip" for your real public IP and also the "--dport 3306" for the port you want to forward. Finally run the sysctl command and........

  • Linux Mint 17 How to Enable File Sharing Option in File Manager


    I still cannot understand how this would not be enabled by default and I struggled to find the reason why with manually installing samba etc.. wondering why the option for sharing was not in the menu. On Linux Mint "MATE" the package is called "caja-share" and on Cinnamon it is called "nemo-share" so edit the below command as necessary: *Also note that the "samba" package is necessary as it is not inst........

  • possible SYN flooding on port 80. Sending cookies.


    Errors like this are shown on high usage servers and ports so it is common to see it on http and even imap ports: possible SYN flooding on port 80. Sending cookies. The Linux kernel will even detect flooding on OpenVZ containers: possible SYN flooding on ctid 6000, port 993. Sending cookies. In many cases this is not an issue and is more so simply a result of regular, but high usage traffic.........

  • The connection was reset The connection to the server was reset while the page was loading.


    In Firefox I cannot connect to any website, proxy is disabled and outside network access is confirmed, no system or manual proxy was set on this Linux Mint/Ubuntu system. Normally this can be caused by proxy or DNS problems and the weird thing is that traceroute and ping to other IPs worked fine but even connecting to sites by IP was not working. The connection was reset The connection to the server was reset while the page was loading.........

  • astrachat connection problems in Android 5.01 Lollipop


    I wanted to use Astrachat because it seems to be the only app that has video, pic and file sharing for Jabber butI cannot even connect despite any other client working fine including Xabber and others. astrachat "Oops.. We can't connect to the account that you provide above. Please recheck your account detail". Unfortunately to make it worse there doesn't seem to be any error log or more details about the issue. The jab........

  • mysql_real_escape_string returns an empty string solution


    This is a common mistake but many people do not realize this function comes from mysql itself, so therefore you need an active mysql connection open. Usually the string will be empty and null when you call it from outside of the database connection portion of your code. eg. an example of the wrong way and creating a null/empty string $var = mysql_real_escape_string($myself) mysql_connect(); // returns n........

  • Centos and obfsproxy install errors


    pip install obfsproxy /usr/lib/python2.6/site-packages/pip/_vendor/requests/packages/urllib3/util/ssl_.py:90: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning. InsecurePlatformWarning You are using pip version 7.1.0, however version 8.1.1 i........

  • There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:


    There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.7.9 (default, Apr 21 2016, 16:51:58) [GCC 4.4.7 20120313........

  • Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so:


    Stopping httpd: [FAILED] Starting httpd: httpd: Syntax error on line 73 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared obje........

  • Nvidia Linux Card not working due to LSI 9200/SAS2008 IRQ conflict


    At first my BIOS said the card may not work right because there is no more option ROM space. I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly. But it still cannot initialize the card properly(does not work): [ 33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........

  • SAS2008 LSI 9200-E Linux Upgrade Flash Firmware with sas2flash


    Download from here http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9200-8e#downloads sudo Installer_P20_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash -listall LSI Corporation SAS2 Flash Utility Version 20.00.00.00 (2014.09.18) Copyright (c) 2008-2014 LSI Corporation. All rights reserved &nbs........

  • Apache Vhost HowTo Serve Same Content using a different domain and IP


    There are a few ways of doing this and all basically involve using the reverse proxy or "ProxyPass" feature of Apache to accomplish it. 1.) Create a normal vhost and simply symlink the root directory of the site you want to mirror. Eg. originalsite.com and newsite.com /vhosts/originalsite.com/httpdocs You would symlink like this: ln -s /vhosts/originalsite.com/httpdocs vhosts/originalsite.com/........

  • MySQL PHP adding a backslash/escaping apostrophes Solution


    The first thing to diagnose is what is actually in the database (use PHPMyAdmin or CLI). You will of course either find that the backslash is either in the database or not. If the backslash is in the database you probably have magic quotes gpc/runtime on and/or are calling the "addslashes()" function which does this. If you are escaping your data with mysql_real_escape_string() then think again, you probably have magic quotes gpc enabled either in php.ini or........

  • Linux Mint/Ubuntu/Debian Dual NICs networks problem when enabling and disabling one device


    The Scenario You have dual NICs and you disable NIC1 which uses 192.168.1.1 as its gateway. With NIC2 you enable it/connect it to another network which also has the gateway 192.168.1.1 Everything will work fine at this point. When switching back to NIC1 even with NIC2 disabled and even unplugged, the OS basically can't pick up the new/updated ARP entry of the old device for 192.168.1.1 and perhaps thinks it is a security risk or spoof of some sorts and blocks i........

  • Force SSL for all URLs Apache htaccess modrewrite


    The best way is as below in .htaccess using modrewrite, any request that is not SSL will be redirected to https://domain.com and the exact same URL RewriteCond %{SERVER_PORT} 80 RewriteRule ^(.*)$ https://domain.com/$1 [R=301,L]........

  • Vbox Cannot register the hard disk


    Cannot register the hard disk '/media/Debian8.vdi' {d01efabc-aacf-4614-b29c} because a hard disk '/home/VirtualBox VMs/Debian/Debian8.vdi' with UUID {d01efabc-aacf-4614-b29} already exists. This is what happens if you move the VDI to another location. The easiest way is to delete/remove the machine from VBOX and then reimport it from the new location.........

  • Centos installing grub problems suspect gpt problem


    grub> root (hd0,0) root (hd0,0) Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) But if you do: root (hd1,0) setup (hd1) it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical). Checking if "/boot/grub/........

  • Cannot get mono to work properly on Linux Mint


    mono/wine not working in Ubuntu/Linux Mint/Debian: The assembly mscorlib.dll was not found or could not be loaded. It should have been installed in the `/usr/lib/mono/2.0/mscorlib.dll' directory. solution: sudo apt-get install mono-complete Problems: mono does not work well for even simple things like a Winrar self extracting .exe fi........

  • Bing/Microsoft Ads flex.atdmt.com causing problems for ad tracking and site loading


    I was asked to troubleshoot why a site wasn't loaded or responding properly, it turned out they were using some old javascript tracker from Bing/Microsoft that is no longer valid or working. You have to wait forever for it to time out but it really did disrupt the functionality of a very important site: flex.atdmt.com If you have the above code in javascript on your site remove or comment it out.........

  • Virtualbox Error


    In plain English this happens after you upgrade VBOX and it rebuilds kernel modules based on a newer kernel than you are running (eg. you upgraded your kernel but haven't booted into it). It is too bad there is not a standard work around that would allow it to realize this and keep old kernel modules and use them if it detects your current kernel is older than the most recently build modules. =============== RTR3InitEx failed with rc=-1912 (rc=-1912) The........

  • Debian 8 Jessie in Linux OpenVZ Container does not work on Centos host


    It sounds like this is corrected in later versions of the OpenVZ kernel but Iam not sure, it may also be that a much newer kernel is needed and Centos may not have a recent enough kernel. *Debain 7.0 however does work fine as a temporary fix or work around. Debian 8 OpenVZ no IP and networking not working: lo Link encap:Local Loopback  ........

  • unfortunately lg keyboard has stopped - LG Phone Keyboard Issue


    This seems to effect many other LG phones , specifically their keyboard app and basically makes your phone unusable where you cannot use the keyboard because that message keeps popping up and the keyboard will not load. unfortunately lg keyboard has stopped solution: 1. Go to your settings and manage apps and find the LG Keyboard app: 2. Stop it from running, delete all data and clear all cache. After the above you will probably find that your........

  • Windows showing wrong drive size after resizing the VPS/image or cloning howto fix


    How to Increase The Disk and Partition Size in Windows 2022,2019,11,10,8,7 etc.. Server 1, Enter the command prompt Start -> cmd 2. Start diskpart diskpart 3. Find the drive that has the wrong size list volume 4. Select the volume (in this example we use volume 2) select volume 2 5. Extend the volume........

  • Microsoft Access .mdb files how to view them on Linux Ubuntu/Debian


    The package "mdbtools-gmdb" works very well but I was not able to get the forms working that were part of the .mdb but you can at least view all of the rows and Export to CSV........

  • Centos 6 how to guide convert LVM non-RAID into mdadm 1/10 RAID array live without reinstalling


    Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access. So in this case you add a second physical or disk or already ha........

  • Centos cannot login by console or ssh session closed immediately


    In my case I could login with the initial install but I rsync'd everything over while preserving ownership and permissions to another RAID partition and booted from that.was fine before. The problem is that you are kicked out the second you login and the problem was SELINUX for some reason (perhaps it noticed something strange when it was moved to the new partition) login: pam_unix(login:session): session opened for user root by LOGIN(uid=0) login: ROOT LOG........

  • openvz yum problem Centos 6.5 cannot find file on mirror:


    #solution Edit /etc/yum.repos.d/openvz.repo For the first two entries comment out #mirrorlist and uncomment #baseurl and then it worked openvz yum problem Centos 6.5 cannot find file on mirror: yum update Loaded plugins: fastestmirror Determining fastest mirrors * openvz-kernel-rhel6: mirrors.ustc.edu.cn * openvz-utils: mirrors.ustc.edu.cn base ........

  • How To Install Linux Mint 17.2 on mdadm RAID with a separate boot partition


    Iwas surprised to see that Linux Mint at the latest 17.2 version still has NO mdadm installer option, and worse the installer will not be able to create a proper booting environment even when you do install it. How to setup mdadm in Linux mint LiveCD sudo su apt-get install mdadm # partition as you need and then create your mdadm devices # create your SWAP md0 mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /d........

  • ONVIF Linux Security Camera Setup


    First of all this seems to apply to many ONVIF devices Hard coded IP: 192.168.1.10 (yes not kidding no DHCP!) 00:12:12:9C:C2:00 To view RTSP stream use VLC, or openRTSP or other RTSP capable software: rtsp://192.168.1.10/user=admin_password=tlJwpbo6_channel=1_stream=0.sdp user: admin password: blank http://ip/Login.htm Uses Quicktime and is a poor quality picture and slow Cannot change pass........

  • Installing zoneminder on Ubuntu/Debian Linux Howto


    sudo apt-get install zoneminder [sudo] password for one: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libuser-perl python-evince kdebase-apps kwrite unixodbc libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp python-mediaprof........

  • status: { DRDY ERR } error: { ICRC ABRT } failed command: WRITE FPDMA QUEUED MCP55 Linux Errors


    [ 2868.041375] ata1: EH in SWNCQ mode,QC:qc_active 0x40 sactive 0x40 [ 2868.041554] ata1: SWNCQ:qc_active 0x40 defer_bits 0x0 last_issue_tag 0x6 [ 2868.041556] dhfis 0x40 dmafis 0x40 sdbfis 0x20 [ 2868.041874] ata1: ATA_REG 0x41 ERR_REG 0x84 [ 2868.042013] ata1: tag : dhfis dmafis sdbfis sactive [ 2868.042163] ata1: tag 0x6: 1 1 0 1 [ 2868.042301] ata1.00: exception Emask 0x1 SAct 0x40 SErr 0x400000 action 0x6 frozen [........

  • Centos/obfsproxy errors


    I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar: yum -y install python-pip python-devel No package python-pip available. #install the EPEL repo python-pip install obfsproxy python-pip install obfsproxy -bash: python-pip: command not found pip install obfsproxy &........

  • OpenVZ Install Guide Again / Quick Setup


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl #enable ip_forward sed -i s/'net.ipv4.ip_forward = 0'/'net.ipv4.ip_forward = 1'/g /etc/sysctl.conf #all interfaces should not send redirects echo "net.ipv4.conf.default.send_redirects = 1" >> /etc/sysctl.conf echo "net.ipv4.co........

  • iptables port forwarding multiple ports to another IP


    iptables -t nat -A PREROUTING -p tcp -m multiport --dports 80,443,2068,8192 -j DNAT --to-destination 192.168.1.175 Just adjust the "--dports" to the ports you need and the --to-destination to the destination IP (note it must be on the same network as the server running iptables........

  • Weird Ubuntu Issues with NVIDIA driver/Compiz


    1.) My screensaver would take a long time to disable after hitting a key. 2.) Usually errors like below will follow. 3.) Compiz sometimes uses 100% or high CPU 4.) My window controls will disable (eg. the minimize, maximize and close buttons). It seems like Compiz or appearance/effects disable themselves. Re-enabling Desktop Effects under Appearance temporarily fixes it. 5.) high load in general from things like "Migration" pr........

  • HP Procurve Switch 2824 CLI Telnet Experience , Guide and Tutorial


    ------------------------------------- ProCurve J4903A Switch 2824 Software revision I.10.77 Copyright (C) 1991-2009 Hewlett-Packard Co. All Rights Reserved. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by the Government is subject to restrictions........

  • Linux check NIC ethernet port network card speed


    ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full ........

  • HP XW9400 Motherboard In Desktop Issues


    Fortunately the format is EATX so an EATX case will work and the screw layout is standard. You will need to remove the HEX/TORX screws that are connecting the stock HP standoffs (meant to slide into an HP case). XW9400 Motherboard Issues Size: 12" x 13" Proprietary Power Connector Proprietary CPU Power Connector Proprietary Memory Power Connector Fan connectors are 4 pin so you will need some kind of adapter.........

  • Dell CS24-NV7 lspci dmidecode info


    0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2) 0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3) 0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3) 0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1) 0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2) 0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 0000:00:05.1 I........

  • Centos OpenDKIM & Postfix Setup Guidel


    #from epel repo yum -y install opendkim chkconfig opendkim on cd /etc/opendkim/keys opendkim-genkey -vd mail.server.com opendkim-genkey: generating private key opendkim-genkey: private key written to default.private opendkim-genkey: extracting public key opendkim-genkey: DNS TXT record written to default.txt ........

  • Lost connection to MySQL server during query [2013]


    This happened while trying to delete several thousand users from phpBB and basically corrupted the innoDB tables. InnoDB: Page lsn 3 881164362, low 4 bytes of lsn at page end 881164362 InnoDB: Page number (if stored to page already) 86920, InnoDB: space id (if created with >= MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 700 InnoDB: (index "tid_post_time" of table "phpBBdb2005"."phpbb3_p........

  • No package fuse-encfs available. yum


    It looks like newer versions of Centos no longer have encfs so you have to compile it, only it does not work and fails so those wanting encfs should probably use any other OS which supports it better.........

  • Error: Cannot retrieve metalink for repository: epel. Please verify its path and try again


    Error: Cannot retrieve metalink for repository: epel. Please verify its path and try again You have to upgrade the ca-certs for epel but need to disable it before that can happen. yum upgrade ca-certificates --disablerepo=epel........

  • Dell CS24SC Server Info


    Dell CS24SC Info 0000:00:00.0 Host bridge: Intel Corporation 5100 Chipset Memory Controller Hub (rev 90) 0000:00:02.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x8 Port 2-3 (rev 90) 0000:00:03.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 3 (rev 90) 0000:00:04.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x16 Port 4-7 (rev 90) 0000:00:05.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 5 (rev 90)........

  • Dell CS10-F1D Server Info lspci Linux specs


    0000:00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1) 0000:00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) 0000:00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) 0000:00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1) 0000:00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4........

  • Linux Kernel EDAC errors EDAC MC0: UE row 0, channel-a= 0 channel-b= 1 labels "-": NON-FATAL recoverable (Branch=0 DRAM-Bank=0 Buffer ID = 0 RDWR=Read RAS=0 CAS=0 NON-FATAL recoverable Err=0x800 (Non-Aliased Uncorrectable Patrol Data ECC))


    I'm not sure why I'm getting these but all memory modules are the exact same and all passed memtest successfully although they are ECC. I've heard that ECC RAM can't be tested as well and the kernel seems to indicate they are non-fatl recoverable errors. I wonder if the BIOS has aggressive RAM timing or maybe the controller or motherboard is bad. [ 12.716515] EDAC MC: Ver: 2.1.0 [ 12.717771] EDAC MC0: Giving out device to........

  • VPN Account Buyers Guide and General Info


    What matters most about VPNproviders in 2024? We are highly suspicious of VERYLARGE VPN providers that have LOW PRICES and HUGE DISCOUNTS. The suspicion is that for those who know what costs are involved to purchase thousands of IPs and servers are not small. At the prices that many of the big mainstream providers offer, it is likely unprofitable or barely profitable. Then, how are those companies making money or is that even the goal? There use........

  • Disable linux bash proxy ENV export variable


    if you type Export and see something like this: declare -x all_proxy="socks://127.0.0.1:22000/" Most sites assume and tell you to check your .bashrc or /etc/profile /etc/bash.bashrc which may not apply if you've unknowingly or forgot that you setup a proxy from your GUI such as Gnome. To check in Gnome if you have a permanent proxy do the following: System -> Settings -> Network Proxy........

  • PHP Issues with Joomla Strict Standards: Non-static method JLoader::import() should not be called statically


    This is basically caused by upgrading PHPto a new version like 5.4 when you had 5.2 before and an old version of Joomla. The only solution is to upgrade Joomla or downgrade PHP, both of which can be a pain. Strict Standards: Non-static method JLoader::import() should not be called statically in /home/userdir/public_html/libraries/joomla/import.php on line 29 Strict Standards: Non-static method JLoader::register() should not be ca........

  • esniper and curl errors https://signin.ebay.com/ws/eBayISAPI.dll?SignIn: Couldn't connect to server: couldn't connect to host


    I kept thinking it was esniper but somehow my bash settings have a preset proxy that was creating the issue. https://signin.ebay.com/ws/eBayISAPI.dll?SignIn: Couldn't connect to server: couldn't connect to host curl manually to any URL is the same: curl: (7) couldn't connect to host Run curl with -vvvvvv mode to see the issue: curl -vvvvvvvvvv http://realtechtalk.com * About to c........

  • Centos automatic ifcfg-eth0 scripts based on list of IPs from bash


    It's a basic script that reads the file "ips.txt" in the current directory and then creates a corresponding ifcfg file     #!/bin/bash GATEWAY=192.168.1.1 NETMASK=255.255.255.0 device=eth0 counter=0 for ips in `cat ips.txt`; do........

  • libguestfs tools howto guide for mounting partitions and managing virtual machine images


    libguestfs tools howto guide for managing virtual machine images. libguestfs-tools aka guestfs tools has a lot of tools that make this very easy for you. You can easily mount partitons from an image with some of the commands below. To mount a partition #mount the kvmuser102821.img image and the /dev/sda1 partition from it to the local directory "mount" guestmount -a kvmuser102821.img -m /dev/sda1 mount ........

  • NS_ERROR_FAILURE (0x80004005) The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.


    The solution is to run '/etc/init.d/vboxdrv setup' and sometimes happens when upgrading VBox and the kernel modules don't get upgraded with it. Sometimes the above doesn't work until you reboot because sometimes other unknown processes (even the file manager possibly) may be locking the old module from being unloaded. Failed to open a session for the virtual machine XP. The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.........

  • Openvz iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. solution


    iptables -t nat -A PREROUTING -p tcp -m tcp -d 192.168.2.1/32 --dport 3389 -j DNAT --to-destination 192.168.5.2:3389 iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. The above is often because you don't have the correct modules loaded on the hostnode or enabled for the container but in some cases it's actually a weird openvz setting. Che........

  • Postfix Errors & Solutions "unprivileged": bad value: "???" - bad transport type:


    Aug 25 16:43:24 evohostingtor postfix/master[19471]: fatal: /etc/postfix/master.cf: line 24: field "unprivileged": bad value: "???" Solution: I had the wrong thick dashes when c&ping (just retype them with your keyboard) Aug 25 16:47:10 mailbox postfix/master[24498]: fatal: /etc/postfix/master.cf: line 25: bad transport type: syslog_name=postfix/auth-cleanup auth-cleanup unix n - - - 0 cleanup #-o syslog_name=postfix/........

  • Postfix how to secure outgoing authenticated e-mails for privacy and hide the IP address, mailer and other things


    The most common solution is to use the /etc/postfix/header_checks but this is a big problem. Why is header_checks a problem? Because it does it to all mail whether incoming or outgoing and whether authenticated or not. We of course want as much header information for incoming as we can get for many reasons but many organizations want to secure and make their mail clients as secure as possible. I adapted this solution to the client's custom config, they are configur........

  • 2CO/2Checkout Howto Enable IPN/Notification Setup & Script Info


    https://www.2checkout.com/documentation/notifications/order-created It shows all the parameters that get passed so you can make a simple script to process it. To enable 2CONotifications you need to do the following: Login Browse to the top right to an icon that looks like a "circle with horizontal lines inside" - Notifications. Enter the appropriate URL for your IPN/Notification processing script (........

  • CPanel Link to all of the command line options


    CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting.  I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts. So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........

  • Ubuntu Linux Slow/Delayed SSH ping response Solution


    I've only ever seen this in Ubuntu for some reason and it is because of the /etc/nsswitch.conf settings. So the issue is that if the hostname's reverse DNS cannot be found that you need to go back to DNS which was not the default in this nsswitch.conf file for some strange reason. Edit /etc/nsswitch.conf and replace your "hosts" line with this: #hosts: files dns mdns4_minimal [NOTFOUND=return] mdns........

  • phpBB create new email hash manually when modifying or adding user manually directly through MySQL


    Many may ask why would you need to do this? When upgrading from phpBB 2 to 3 the conversion does not keep the admin user you create. If your old admin user has an email address associated that no longer works or is accessible this makes it impossible to reset the admin password. Some may just say "I'll just manually edit the e-mail address" but it won't work and phpBB will fail to find that user if you don't update the "user_email_hash" field but how do........

  • iptables how to forward port to another IP address with DNAT


    -A PREROUTING -d 98.98.98.5/32 -p tcp -m tcp --dport 1050 -j DNAT --to-destination 192.168.1.50:3389 The above forwards port 1050 on IP98.98.98.5 to 192.168.1.50 port 3389 (you can obviously edit things to meet your needs).........

  • The Best NoSQL Solution


    To first start off, there are many misconceptions about NoSQL and especially its strengths and weaknesses. Even the popular NoSQL solution MongoDB is fraught with issues that no one seems to be concerned about aside from a few but there are serious issues with database integrity and verified writes. MySQL was considered dangerous or incomplete at one point without having the transactional safety features of Oracle for example. However the NoSQLimplementations seem........

  • How to update Open Office in Ubuntu/Debian if your repository is outdated or no longer supported


    http://sourceforge.net/projects/apacheoo-deb/files/debian/dists/wheezy/main/binary-i386/ To install AOO on your computer, you need to add the following entry to the /etc/apt/sources.list file: deb http://downloads.sourceforge.net/project/apacheoo-deb/debian wheezy main sudo apt-get update && sudo apt-get install openoffice-en* openoffice-brand-writer openoffice-brand-calc openoffice-brand-impress openoffice-brand-base open........

  • error: Legacy syntax is unsupported: copyright error: line 10: Unknown tag: Copyright: distributable


    Usually just modify the .spec file to resolve this: vi specfile.spec Change "Copyright: GPL" to "License: GPL" and try again.........

  • Howto Convert Xen Image to KVM


    #count=10000 makes an image of 10000MB make sure your image is at least the same as your existing dd if=/dev/zero of=yourimage.img bs=1M count=10000 # losetup -fv newimage.raw # fdisk -cu /dev/loop0 # kpartx -a /dev/loop0 # dd if= of=/dev/mapper/loop0p1 # e2fsck -f /dev/mapper/loop0p1 # resize2fs /dev/mapper/loop0p1 # a lot of guides tell you to edit /etc/fst........

  • yum error "Error: database disk image is malformed" solution


    yum -y install mathtools Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.mirror.rafal.ca * epel: mirror.steadfast.net * extras: mirror.agmn.ca * rpmforge: repoforge.mirror.constant.com * updates: centosb5.centos.org extras ........

  • Asterisk VOIP Sipura/Linksys PAP2T Calls Not Being Received Solution


    This problem seemed to happen recently but was likely causing issues before where the phone(s) do not ring. Now there are a few reasons why this can happen especially if your adapter has DND mode enabled (disable it). However that wasn't my issue and Ionly figured it out the other day when by fluke if you're on the phone (making a call) then calls will come in. That's when Ifigured out the solution: This likely app........

  • Enable Multiple RDP Sessions on Windows XP, Vista, 7 Howto


    http://deepxw.blogspot.ca/search/label/Universal%20Termsrv.dll%20Patch The above site has the patch that does this essentialy turning a Desktop Windows into a full fledged RDP server.........

  • yum Centos 386 and 64 bit conflict resolution


    This can happen when you install RPMForge or other repos with the wrong architecture and here's how you fix it (simply uninstalling won't usually fix it): solution yum clean all yum -y install openvpn Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile * base: mirror.its.sfu.ca * extras: centos.mirror.nexicom.net * rpmforge: mirror.cpsc.ucalgary.ca * up........

  • OpenVZ Quick Install Copy & Paste for Centos 6


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl After that just reboot and you may also have to enable ip_forward in /etc/sysctl.conf........

  • yum error installing php solution - exclude php from being installed from third party repos


    Error: Package: php-Monolog-dynamo-1.7.0-1.el6.noarch (epel) Requires: php-aws-sdk Error: php-pecl-zendopcache conflicts with 1:php-eaccelerator-0.9.6.1-1.el6.x86_64 Error: php-xcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64 Error: php-pecl-zendopcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64 Error: Package: php-horde-Horde-Vfs-2.1.2-2.el6.noarch (epel) &n........

  • cPanel VPS Server Cannot Login as root


    I was worried the server was hacked, I was logged in already as root but couldn't login to CPanel or a new SSHsession. I even reset the password from the shell and it did not work still. The reason is CPanel Hulk, it detected a brute-force attack so it locked down the root account entirely even from the correct password. According to cPanel the best way around this is to whitelist your IP.........

  • Howto edit/rotate Samsung/Android Videos in mencoder solution


    Movie-Aspect is undefined - no prescaling applied. videocodec: libavcodec (720x1280 fourcc=34504d46 [FMP4]) [mpeg4 @ 0x2c91c00] timebase not supported by mpeg 4 standard Could not open codec. FATAL: Cannot initialize video driver. That is the error I would get, I thought it was a codec error something else. By fluke Isaw something about ffmpeg where someone recommended manually telling it to the "fps" and it worked.........

  • What a hdd hard drive and mdadm RAID array failure looks like in Linux


    [3805108.257042] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [3805108.257052] sd 0:0:0:0: [sda] Write Protect is off [3805108.257054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [3805108.257066] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [3805108.257083] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [3805108.257090] sd 0:0:0:0: [sda] Write Protect is off........

  • iptables howto multiport forward in single line example


    -A PREROUTING -p tcp -m multiport --dports 10000,18080,13306 -j DNAT --to-destination 192.168.5.83........

  • Asterisk iptables block bruteforce attacks howto with fail2ban


    yum -y install fail2ban vi /etc/fail2ban/jail.conf [asterisk-tcp] enabled = true filter = asterisk action = iptables-multiport[name=asterisk-tcp, port="5060,5061", protocol=tcp] sendmail-whois[name=Asterisk, dest=you@example.com, sender=fail2ban@example.com] logpath = /var/log/asterisk/messages maxret........

  • kvm centos cannot compile error


    ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install gcc make ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install compat-gcc-* ./configure Error: Could not find alsa Make sure to have the alsa libs and headers installed. yum -y install alsa-lib-devel ./configure........

  • Migrate Linux Mint OS from one drive to another


    mount -o bind /proc /sda2/proc mount -o bind /dev/ /sda2/dev mount -o bind /sys /sda2/sys chroot /sda2 mint / # mount -o bind /proc /sda2/proc mint / # mount -o bind /dev/ /sda2/dev mint / # mount -o bind /sys /sda2/sys mint / # chroot /sda2 mint / # cd ~ mint ~ # ls Desktop mint ~ # cd / mint / # ls bin Desktop dev-temp home&nb........

  • Openvz OOM Centos Issue Memory Config Settings Solution


    Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux even setting privvmpages to a specific setting DOES not affect "free -m" in containers. This is probably a kernel issue 23:36:29 up 159 days, 7:12, 4 users, load average: 0.42, 0.44, 0.33 [root@box13 ~]# free -m total&n........

  • Sipura / Linksys PAP/VOIP/SIP Adapter Issue Can't receiving incoming phone calls and you're behind a NAT router (99% of people)? solution


    Sipura / Linksys PAP/VOIP/SIP Adapter Issue Can't receiving incoming phone calls and you're behind a NAT router (99% of people)? 1. Login to the adapter. 2. Click on "Advanced" (location varies but usually somewhere on top) 2. Click on "SIP" 3. Scroll down to "NAT" (usually at the bottom). You'll find 2 columns with 4 rows of drop-down boxes (they'........

  • guestmount to mount a disk image


    guestmount -a yourimage.img -m /dev/sda1 --ro /mountpoint Change "yourimage.img"to the actual disk image. Change "/dev/sda1" to the device on the disk image you want to mount. --ro is specified only if you don't want write access (good to ensure you don't mess anything up if you just want to recover data).........

  • rpmforge Centos 6 how to install


    rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt i686: rpm -ivh http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.i686.rpm x64: rpm -ivh http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm ........

  • bash date command to convert unix epoch timestamp


    date -d @timestampgoeshere +%c It's very handy and simple as shown above.........

  • Apache SNI is not needed what is the issue?


    Iread this article and still don't understand the issue. If I understand correctly the client negotiates after the first SSLconnection and then gets the correct hostname and thus correct certificate. http://wiki.apache.org/httpd/NameBasedSSLVHostsWithSNI To their credit I know I'm not using SNIbecuase Iget this message in the Apache log :) [warn] Init: You should not use name-based virtual hosts in conjunction with SSL!! B........

  • Centos 5,6,7 Install EPEL from Fedora for extra packages Howto


    http://fedoraproject.org/wiki/EPEL#How_can_I_use_these_extra_packages.3F Visit the above URL, choose your version and architecture and install it. EPELhas a lot of missing and extra packages that rpmforge does not. For old versions of EPEL that are deprecated, eg.........

  • CPanel suhosin install failed


    /scripts/phpextensionmgr install PHPSuHosin Updating md5sum list Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)... Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........

  • MySQL Allows blank user with no password to login


    I just realized I have some blank users which I deleted butI can still login to this dummy account without a password for some reason. mysql -u -p Welcome to the MySQL monitor. Commands end with ; or g. Your MySQL connection id is 5 Server version: 5.1.69 Source distribution Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation an........

  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........

  • Dell Perc 6/i SATA benchmarks without battery


    The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results. This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane. Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: N/A De........

  • Dell Perc 6/i Restore BIOS/Bricked Solution Guide Howto


    I bricked one of my cards by following a guide from UNRAID. Step #1 from them wipes out the BIOS, but guess what? The step where you restore the BIOS should have been done first, which is sas2flash but no version supports or is able to find my Perc 6/i. So now I'm a bit stuck. I tried using megarec but it's funny that it can wipe the BIOS but can't forcefully reload it: megarec -writesbr 0 mpt2sas.rom Supports 1078 control........

  • Dell Perc 6/i cannot downgrade


    I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally. I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN --2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN Resolvi........

  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........

  • rpmforge Centos 6 x64 howto install


    rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt rpm -ivh http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm Retrieving http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm Preparing... ########################################### [100%] 1:rpmforge-release #############........

  • pxe-32 tftp open timeout


    pxe-32 tftp open timeout The solution was to enable tftp in xinetd with "chkconfig tftp on". See the troubleshooting below: chkconfig --list NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off&n........

  • Linux copy file and not just the symlink, How-To/Solution


    cp -L index.php index.php-2013-08-21 The -L switch is what you need because it's a huge issue if you think you've copied a file for backup purposes but it really just creates a symlink to the original file.........

  • CPanel How To Create/Edit Default Nameservers


    CPanel ->Basic cPanel &WHMSetup At the bottom you'll see them, set the nameservers you want to use and the corresponding A record if needed. Then all new domains will use those settings/nameservers. It's strange that there's no section for this specifically.........

  • GoDaddy How To Register and Create/Use Your Own DNS Name Servers


    http://support.godaddy.com/help/article/668/registering-your-own-nameservershosts?pc_split_value=1 Log in to your GoDaddy Account. Click on "My Account" at the top left. Click on "Domains". Click on the "Launch" button for the domain you want to create the nameservers for. Find........

  • bash for loop with specific numbers


    Say if you need to make a firewall script to block certain ports this works great. for ports in 21 25 443; do iptables rules here done........

  • iptables centos error getsockopt failed strangely: Invalid argument


    iptables -t nat -A PREROUTING -p udp -m multiport --dports 20,123,443 -j REDIRECT --to-port 53 getsockopt failed strangely: Invalid argument........

  • yum update error


    yum update error Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 229, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 145, in main (result, resultmsgs) = base.buildTransaction() &nbs........

  • open /dev/kvm: No such file or directory failed to initialize KVM: Operation not permitted - Solution


    open /dev/kvm: No such file or directory failed to initialize KVM: Operation not permitted [ 96.084502] kvm: disabled by bios Any of the above means that "Virtualization" is not enabled in your BIOS. Most servers and Desktops (non-mainstream) can do this no problem but leave it off by default. Note that some systems even though the CPU supports it, don't allow enabling of Virtualization for some reason (especially some lap........

  • iptables redirect ports to a different host and port + NAT Masquerade howto/solution


    This is important if you need public access to internal IPs such as at your office and don't want to use a VPN just to SSHinto different servers: Below forwards the port "10001" to the IP192.200.5.53 on port 22 (of course adjust it to your needs). iptables -t nat -A PREROUTING -p tcp --dport 10001 -j DNAT --to-destination 192.200.5.53:22 Remember to enable MASQUERADE on your NAT IPs or they won't be able to talk to the outside world (........

  • Antec ECO450C Crashing


    Crashing with a RAID 1 array and when burning a CD. Screen goes blank (no video signal) and system stops responding during heavier loads. Is this a defective power supply or is it possible I have too many devices connected to the same rail? How can I verify/troubleshoot this?........

  • Ubuntu Download Packages/Updates for EOL Unsupported Old Releases


    I installed Ubuntu 11.04 for testing purposes but I couldn't even download SSH server: sudo sed -i -e 's/us.archive.ubuntu.com/old-releases.ubuntu.com/g' /etc/apt/sources.list After running the above make sure you do a "apt-get update" Note with the above that Ihave the search string of "us.archive.ubuntu.com" change it to whatever is in your sources.list The above does not fix all repositories either, I haven't had a chance t........

  • MySQL HowTo Copy Duplicate a Table for backup purposes


    This is a great way to test and experiment without risking your current table, or to make a backup of your current table to avoid corruption or dataloss due to malicious activity eg. deletion etc.. There are two steps and two commands 1.)Copy Table Structure "cars_backup" is the new table and it will be a copy of the table called "cars"........

  • WD 20EARX Dead Again


    Another new drive bad from the start: Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC } Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........

  • find only directory names in Linux


    find / -name 'thedirectorytofind' -type d That's all there is to it and now you don't have to get a listing of all the files along with it. Another cleaner solution that supports wildcards is the following find prep-*/dvd-slideshow_temp*/ -type d ........

  • WD 20EARX 2TB Bad within days


    This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad. ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0 ata1.00: irq_stat 0x40000008 ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/00:00:........

  • Powersupply Issue, Motherboard AHCI issue?


    This is the most I can get when plugging in a hard drive hot and only on some power connectors. [71656.314271] ata5: exception Emask 0x50 SAct 0x0 SErr 0x90a02 action 0xe frozen [71656.314277] ata5: irq_stat 0x00400000, PHY RDY changed [71656.314285] ata5: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B } [71656.314294] ata5: hard resetting link [71660.360686] ata5: softreset failed (device not ready) [71660.360694] ata5: applying........

  • mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142) - Solution


    mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142) One of my clients almost found out the hard way, here is an unlikely situation that happened. 1.) Years ago the client had another VPS to which they backed up a BLOG nightly to an .sql file, what they forgot is that the file also contained all databases (they used the --all-databases option but forgot). So imagi........

  • Solution ERROR 1146 (42S02): Table ‘mysql.servers’ doesn’t exist - when running flush privileges


    flush privileges; ERROR 1146 (42S02): Table ‘mysql.servers’ doesn’t exist This happened to me on a system running Centos with the REMI repo and a new version of Mysql 5 (which the official Centos/RHEL does not support on version 5). The solution is just to run this program "mysql_upgrade", after that flush privileges will work. mysql_upgrade........

  • PHP How To Create and Assign Variables from POST/Submit FORM


    foreach ($_POST as $key => $value) { if ( $key != submit ) { $values.="$key=$value<........

  • Country List Names in HTML Select From


    This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others: Choose CountryCanadaJapanUnited StatesUnited KingdomAfghanistan........

  • Ubuntu/Linux disable extra Mouse Buttons Microsoft Comfort Mouse 4500


    I find it very annoying that this mouse has buttons on the side where you grip it and the left one goes back in the browser and the right one goes forward. Imagine if you're filling out a form and hit it, most forms/websites have no protection against it. Source: http://ubuntuforums.org/showthread.php?t=2065400 Here's how I fixed it with xinput, it's too bad there's no good standard GUI to........

  • postfix/dovecot Sent emails missing sometimes


    On occassion and from a variety of networks and clients, Sent messages don't get saved. I'm wondering if these log messages could be why: May 3 14:16:39 mail.box postfix/smtpd[5195]: connect from 192.168.1.58 May 3 14:16:39 mail.box postfix/smtpd[5195]: SSL_accept error from 192.168.1.58: -1 May 3 14:16:39 mail.box postfix/smtpd[5195]: lost connection after CONNECT from 192.168.1.58 May 3 14:16:39 mail.box postfix/smtpd[5195]:........

  • SMARTCTL Enable SMART on Device Solution for Error "Device does not support SMART Error Counter logging not supported"


    smartctl -a /dev/sda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: ATA WDC WD1600YS-01S Version: 20.0 Serial number: WD-WCAP03024940 Device type: disk Local Time is: Mon Apr 29 21:40:07 2013 PDT Device does not support SMART Error Counter logging not supported........

  • Kernel panic - not syncing: Attempted to kill init! Pid: 1,comm: init Tained: G I------------- 2.6.32-358.el6.x86_64 #1 Call Trace: [] ? panic+0xa0/0x16f [] ? do_exit+0x862/0x870 [] ? fput+0x25/0


    Kernel panic - not syncing: Attempted to kill init! Pid: 1,comm: init Tained: G I------------- 2.6.32-358.el6.x86_64 #1 Call Trace: [] ? panic+0xa0/0x16f [] ? do_exit+0x862/0x870 [] ? fput+0x25/0x30 [] ? do_group_exit+0x58/0xd0 [] ? sys_exit_........

  • Directadmin error/** Found 7 pre-existing rpmdb problem(s), 'yum check' output follows: e2fsprogs-devel-1.41.12-3.el6.i686 has missing requires of e2fsprogs-libs = ('0', '1.41.12', '3.el6') e2fsprogs-devel-1.41.12-3.el6.i686 has missing requires of l


    Solution To The Following: yum -y install zlib-devel yum -y install e2fsprogs* *** Cannot find /usr/include/et/com_err.h. (yum install libcom_err-devel) *** Installation didn't pass, halting install. Once requirements are met, run the following to continue the install: cd /usr/local/directadmin/scripts ./install.sh Common pre-install commands: http://help.directadmin.com/it........

  • mdadm recover from dead drive


    mdadm --manage /dev/md3 --add /dev/sda1 cat /proc/mdstat Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md0 : inactive sdd2[1] sdd1[2](S) 31270272 blocks md3 : active raid1 sda1[2] sdb1[1] sdc1[3](F) 943730240 blocks [2/1] [_U] [>....................]........

  • Bad Hard Drive Slows Down Computer


    Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........

  • Hitachi Serial Numbers for Hard Drives without seeing the physical drive


    Here's what SMART tells me the serial number is: === START OF INFORMATION SECTION === Device Model: Hitachi HDS721010CLA332 Serial Number: JP2940HQ3ZY7KH Firmware Version: JP4OA3EA User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is:&nb........

  • How to log all PHP based E-mails for abuse


    Step #1 - Create Wrapper Script vi /usr/local/bin/phpsendmail #!/usr/bin/php ........

  • Centos 6 RTL8111/8168B r8169 link up and down error solution/fix


    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) For whatever reason it seems the r8169 driver that ships and has shipped with most Linux distros for years is still flawed and does not work properly on these cards, causing 100mbit connectivity when it should be 1gbit and even worse, causing random network dropouts. The r8169 driver in Linux kernels is simply not meant to be used on th........

  • Linux/Ubuntu Samsung Linux Driver Praise with CLP-365W


    Usually a lot of things don't work right on Linux, but Samsung printers aren't one of them. I used to have a CLP310N that never worked right in Linux, it would print strange lines over pictures or with some programs, no picture at all. I was using whatever the default driver that Ubuntu found. Now I upgraded to a CLP-365W which is basically the same thing with wireless but no driver from Ubuntu (eg CLP-350) works. I was forced to go to Samsung's site and was surprise........

  • Samsung 4GB 1Rx4 DDR2 PC5300F FBDIMM Running Hot


    sensors|head i5k_amb-isa-0000 Adapter: ISA adapter Ch. 0 DIMM 0:+115.0°C (low = +127.5°C, high = +127.5°C) Ch. 0 DIMM 1: +63.5°C (low = +127.5°C, high = +127.5°C) Ch. 0 DIMM 2: +61.0°C (low = +127.5°C, high = +127.5°C) Ch. 1 DIMM 0: +65.0°C (low = +127.5°C, high = +127.5°C) Ch. 1 DIMM 1: +75.0°C&........

  • How to install GRUB to the MBR of a disk image.


    cat | grub --device-map=/dev/null Now pay close to the attention of the beginning. Type: "device (hd0) VPS.img" this is telling what hd0 will be to GRUB and we're telling it the disk image file "VPS.img" in the current directory is hd0, you can specify alternate paths and image names of course. GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-li........

  • Setup PXE Boot using Centos and dhcpd, tftp and syslinux


    This is something I often setup for clients because it's very helpful for people in datacenters, this allows custom OS installs on demand, you can customize it more by using kickstart etc.. but here's a base I use before customizing more: This little script below will install everything you need to get booting by PXE Linux. It also assumes you set a local IP (be sure not to overwrite your existing IP) on eth0:0 (note the :0) as 192.168.1.10 and it........

  • Thunderbird How-To Copy/Backup/Restore Accounts and Settings to Another Computer


    The best way is to use rsync, I've set it up so it doesn't copy unnecessary files, or at least ones I'm sure aren't needed. Here is the rsync command Iused (adapt to your specific Thunderbird profile location): rsync -hazv user@remotehost.com:/home/user/.thunderbird/sbrer.default/* /home/user/.thunderbird/4nyb0.default/ --exclude=global* --exclude=Cache --exclude=ImapMail --exclude=Mail This is a great way to get your e-mail accounts going on a new c........

  • KVM/QEMU Base/Template Images and the power they provide


    qemu-img create -b centos.5-8.x86.20120308.qcow2 -f qcow2 ../kvmguests/25000-centos5.8x86.qcow2 Formatting '../kvmguests/25000-centos5.8x86.qcow2', fmt=qcow2, backing_file=centos.5-8.x86.20120308.qcow2, size=10485760 kB -b the source/base image -f format is qcow2 and the location of the destination image What is so special about this? It's even quicker than creating a template with OpenVZ but this is an actual OS. It saves time a........

  • CPanel error: "Your SSL certificate failed to install on your site."


    This error in my experience is user error although CPanel doesn't help, this message doesn't give you much to go on. Let's talk more about the process of setting up SSL with CPanel. Your site must have a dedicated/non-shared IP to even have the option of creating an SSL Certificate. You must create a Private Key (do not delete this private key!) You must create a CSR (Certificate Signing Request) Use CSR to create cert........

  • postfix how to send to multiple recipients default limit of 1000


    The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.5.3 Error: too many recipients. We set this in main.cf: smtpd_client_recipient_rate_limit=0 We didn't specify it before and the default is said to be 0/unlimited and it still didn't change anything.........

  • Centos 5 and OpenVZ won't boot after kernel install


    For whatever reason the current OpenVZ yum repo file enables the RHEL6 version of OpenVZ, why is this bad? Because if you're running Centos 5 it still defaults to using the kernel from RHEL6 which won't work on RHEL5/Centos 5. Ionly realized this after wondering why I couldn't boot into OpenVZ that it was using one meant for RHEL6. To fix the problem you have to edit /etc/yum.repos.d/openvz.repo and disable the "[openvz-kernel-rhel6]" section by changing........

  • Samsung Galaxy Note Upgrade to ICS 4.0 microSDHC card not detected/dataloss after upgrading - possible solutions


    I backed up everything in the /mnt/sd_card directory thinking that some dataloss could occur for some reason but purposely left my microSDHC unbacked up thinking that "it won't touch that since it's external" and Samsung's and other manufacturers website even say this (that it won't be affected and not to worry etc). Apparently I was wrong, my microSD was "undetected" and asked to be formatted after the upgrade (there goes 3-months worth of family photos). No........

  • Centos how to upgrade from PHP 5.2 to 5.3 without downtime


    This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server). You may need to upgrade to PHP5.3 to run Joomla or many other reasons. Your host needs to use PHP 5.2.4 or higher to run this version of Jo........

  • setquota: Mountpoint (or device) / not found. setquota: Not all specified mountpoints are using quota. with openvz solution


    Directadmin Error when changing user settings/saving Details Error with system Quotas setquota: Mountpoint (or device) / not found. setquota: Not all specified mountpoints are using quota. Debug Guide You have to disable and enable the quota's using vzquota on and off. After that it will work.........

  • Error code: sec_error_unknown_issuer Solution Valid SSL Certificate Throwing Error in Firefox


    So you've just purchased your SSL cert, renewed it and installed it or maybe you've had it installed and working fine all the time with all other browsers but you've upgraded to a recent version of Firefox and suddenly get the warning "Error code: sec_error_unknown_issuer" error. This is terrible since if you bought an SSL cert, you are most likely using it for trust purposes for your business and obviously that message will scare away most potential customers.........

  • iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) - OpenVZ Container Problem iptables module problem solution


    iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) This solution applies to all other iptables modules/problems for OpenVZ, you'll just need to add them to both lists/lines below if you have modules other than what I have below. The modules need to be enabled in both iptables and the OpenVZ hostnode itself and then the containers which need it must be restarted. How To Enable IPTables Modules in OpenVZ........

  • HowTo Migrate and Import iPhone/Outlook Contacts into Android without using GMail using .vcf files


    I searched for days after getting my Galaxy Note and couldn't find a way to do this (at least not without buying programs for either Android/Windows). All I read was ways to sync and import the contacts to GMail but I don't want to use GMail for privacy reasons. GMail/Google steal all of your personal information and use it for whatever purposes they want to and may sell or release it to who knows where (I don't care what their policy says but this stuff happens), just like the default........

  • failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)


    [ 12.460014] ata1: SRST failed (errno=-16) [ 17.626677] ata1: link is slow to respond, please be patient (ready=0) [ 22.480011] ata1: SRST failed (errno=-16) [ 27.646681] ata1: link is slow to respond, please be patient (ready=0) [ 38.106817] ata1.01: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 48.266676] ata1: link is slow to respond, please be patient (ready=0)........

  • LOG: MAIN PANIC failed to expand condition "${if eq {$authenticated_id}{}{0}{${if eq {$sender_address}{$local_part@$domain}{0}{${if match{$received_protocol}{N^e?smtps?a$N}{${perl{checkbx_autowhitelist}{$authenticated_id}}}{${if eq{$received_prot


    I experienced this with CPanel's Exim after an auto-update (a Google of this error produces lots of complaints with few clear solutions). In this case I'll put the solution at the top. Run /scripts/buildeximconf to rebuild the Exim config and it should be fine after that. mail -vs "from test" user@dest.com < .bash_history LOG: MAIN cwd=/root 4 args: send-mail -i -v user@dest.com LOG: MAIN &........

  • The Importance of a High Quality Power Supply/Power Supplies To Prevent Overheating/System Crash/Hardware Damage


    For years I've always built cheap systems believing that there is little difference in more expensive components when it comes to reliability and quality, I generally believe this still except for Power Supplies. I've always bought cheap cases with nice sounding 350-550W stock/cheap/crap power supplies and haven't had any issues for the most part until recently. One such case is an NGEAR case with a 550W Optimax power supply, I always read that these supplies don't produce the........

  • Asus VE247H 23.7" Inch LCD/LED Backlit Monitor Dead/Stuck Pixel Policy Complaint


    I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen. I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........

  • Firefox Error ./firefox-bin: error while loading shared libraries: libxul.so: cannot open shared object file: No such file or directory


    When double clicking nothing happens/it doesn't open and when executing as ./firefox-bin you get this error: ./firefox-bin: error while loading shared libraries: libxul.so: cannot open shared object file: No such file or directory All the .so files reside within the directory of Firefox that you extract from the binary .tar.gz from Mozilla, it's just that your computer doesn't know/recognize where to look for them. Solution:........

  • Linux Ubuntu Nvidia GT430 Lockups/Errors/Freezes NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context


    I'm running Ubuntu 10.10 with Asus NVIDIA GT430 2.6.35-32-generic-pae #65-Ubuntu SMP Tue Jan 24 14:06:16 UTC 2012 i686 GNU/Linux Nvidia binary driver: 260.19.06 The screen sometimes completely freezes and locks up or everything starts going very slow: [1903398.100007] NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context [1903402.373210] NVRM: Xid (0001:00): 53, CMDre 00000000 00000080 00000000 00000005 00........

  • Xen non-HVM container won't work/boot anymore


    One of my test Centos 5 containers was on a partition that filled up and it threw all sorts of errors and stopped responding but now I can't boot it again anymore. All the console shows is the Linux Penguin on the top left corner and the xm console says "usbcore: registered new driver hub" and has halted there. Centos 5 Xen container stuck/frozen won't boot on "usbcore: registered new driver hub" Another great way of troubleshooting is booting fro........

  • Ubuntu 10 Nvidia Drivers Not Updated After Kernel Update Solution/How-To Manually Rebuild nvidia kernel modules for Ubuntu


    I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene. This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately). The most common reason may be that "linux-source" hasn't been installed automatically on my system. I tried to manually reinstall the........

  • OpenVPN don't use bridgestart.sh or bridge at all use iptables


    I used the suggested script to bridge from OpenVPN and it took my client's server off-line! Don't ever use their "sample" scripts if you don't have another way of accessing the server than SSH. I actually found it easier to use iptables to tell it to route IPs based on a certain subnet to route through eth0: iptables -t nat -A POSTROUTING -s 192.168.200.0/24 -o eth0 -j MASQUERADE Replace "192.168.200.0/24" with your subnet of cour........

  • postfix lopback error solution


    This is the mail system at host mail.postmail.com. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. &........

  • How To Burn ISO Image using cdrtools/dvdrtools for Linux/Unix Ubuntu/Debian/RHEL/Centos etc..


    It really is as simple as: cdrecord -v dev=/dev/sr0 pathtoyourisoimage.iso -v is for verbose, I prefer it but if you don't you won't see as much output like below (I like to know the details and exactly what's happening) dev=/dev/sr0 specifies the device name of your burner (they say not to use it and to specify some weird annoying device string but using the raw /dev has always worked for me and is how it should have been implemented from the start IMHO)........

  • Hitachi HDD/Drive RMA Process Experience


    The first Hitachi Deskstar 2TB 5K3000 drive I bought arrived DOA for whatever reason (not recognized by the BIOS or OS). Perhaps it was shipping since I bought only 1 hard drive. When I bought 4 through another Vendor, all 4 checked out fine. I was worried about the RMA process because a lot of people have complained about Hitachi taking weeks to send out their hard drive and almost implied the warranty is useless. I'm happy to report that my experience was great a........

  • MySQL Import CSV data tutorial guide


    It's actually fairly straight forward: load data local infile 'billpayments-payments.csv' into table payments fields terminated by ',' enclosed by '"' lines terminated by 'n' The above assumes that your fields are terminated by a comma (some programs like OpenOffice change this to a semi-colon ;) and that they are enclosed with " The above will insert the data from billpayments-payments.csv into the table payments.........

  • vino crashed/stopped working, restart vino manually without rebooting


    The normal solution would be as follows: export DISPLAY=:0.0 /usr/lib/vino/vino-server & But what happens if that doesn't work? I haven't been able to find much documentation about how to find the list of displays and how their numbering works in Xorg. Sometimes you'll get this error when trying to restart vino: Cannot open display: For some reason my display is not on 0.0........

  • vi disable color syntax highlighting/can't read syntax highlighting


    Within vi if you can't exit /etc/vim/vimrc you can type :syntax off And to turn it back on: :syntax on Many of us have a dark/black background in our terminal/shell making the default syntax unreadable, the solution is to either turn off syntax highlighting with :syntax off or to enable a special option in /etc/vim/vimrc Edit /etc/vim/vimrc The "syntax on" enables the highligh........

  • screen Cannot open your terminal '/dev/pts/2' - please check.


    The solution to this screen issue is simple. This happened to me in Centos 5 as a user, but I also su'd to it and I don't have any password for it. I've read some people say this is more common when su'ing. The solution is simple though, just give others rw access to the corresponding pts whether it's 0,1,2 etc..: As root do chmod o+rw /dev/pts/2 ........

  • rpmforge: [#### ] 471/10722Segmentation fault yum[18934]: segfault at 0000000000000000 rip 00002ade62153a30 rsp 00007fff76f9fe58 error 4


    A few days ago this happened on multiple Centos 5 servers and apparently anyone using rpmforge was affected by this error and there was no solution other than disabling that repo to fix it. To some this highlighted a few points, that there is a reason RHELexists with full paid support, and also that this could be a vulnerability and huge flaw with yum. A yum search or install should not segfault just because the rpmforge repo goes down. Fortunately it came back up........

  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........

  • smart is not smart, it thinks a dead drive is still good


    I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior: === START OF INFORMATION SECTION === Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZ20139 Firmware Version: 50.0AB50 User Capacity: 2,000,398,934,016 bytes Device........

  • Openvz YUM Error Solution to "[Errno -1] Metadata file does not match checksum Trying other mirror."


    It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work. I only get this error with the openvz.repo and not others such as Centos-Base.repo With my other server it works normally: ================ Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........

  • GRUB Solution to error "Error 6: Mismatched or corrupt version of stage1/stage2"


    GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.] grub> root (hd1,0) Filesystem type is ext2fs, partition type 0xfd grub> setup........

  • Hitachi 2TB HDS5C3020ALA632 drive DOA


    I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead): ata1: link is slow to respond, please be patient (ready=0) ata1: softreset failed (device not ready) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: link online but device misclassified, retrying ata1: link is slow to respond, please be patient (ready=0) ata1: softreset f........

  • Kernel/make compilation time and how to improve compile times/compile the Linux kernel faster without hardware upgrades


    I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though. There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........

  • List of Free Public DNS Servers IP Addresses


    One thing to note about DNS servers and providers is that they aren't always trustworthy, not even if they're Google or your favorite ISP. Any DNS server can compromise your privacy, and they are likely tracking your browsing habits and keeping logs of it. Sometimes it's for Marketing/Research purposes such as Google's GMail service which they admit is scraped/datamined. I would expect nothing less from their DNS service. The other danger with such widely used and pu........

  • VBox/Virtualbox how to shrink VDI image and recover/reclaim unused disk space


    VBoxManage modifyvdi /path/to/your.vdi compact I believe this should be done only when your VM is powered off, but I decided to try it with the system powered on. i wouldn't recommend it because it's dangerous even if it does work but this is a test system. For anything important/production I would always take a backup first and make sure the system is powered off. VBoxManage modifyvdi XP-clone.vdi compact 0%...10%...20%...30%...40%...5........

  • vnstat setup guide/tutorial


    yum -y install vnstat chown nobody.nobody -R /var/lib/vnstat/ #replace venet0 below with your desired interface sudo -u nobody vnstat -u -i venet0 #edit: vi /etc/sysconfig/vnstat #VNSTAT_OPTIONS="-i venet0" # only use the sed below if you are using venet0 instead of eth0 or replace accordingly sed -i 's/eth0/venet0/g' /etc/sysconfig/vnstat [root@monitor]# yum install vn........

  • Yahoo Mail (email) DNS Server Out Of Date Problems


    I don't expect this to be solved soon but some of Yahoo's DNS servers are out of whack. I changed the IPs of some nameservers of some domains and now most Yahoo users can't e-mail to those domains! As you can see below by the "No MX or A records for mychangedomain.com", now Yahoo's DNS/mailserver DNS cache is wrong. You would think they would at least have cached the old incorrect records, but instead for some reason their DNS cache has no entry and doesn't seem........

  • Linux High IOWAIT updatedb can't be killed and crash with mdadm


    high IO wait 424 root 39 19 1900 848 552 D 0.0 0.0 0:00.91 updatedb root 424 0.0 0.0 1900 848 ? DN Mar11 0:00 /usr/bin/updatedb -f sysfs?rootfs?bdev?proc?cpuset?binfmt_misc?debugfs?sockfs?usbfs?pipefs?anon_inodefs?futexfs?tmpfs?inotifyfs?eventp........

  • Santrex Review Scam Complaint - Stole My Money Fraud


    Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support admitted the server was not working and to wait for 24 hours. I waited for 4-days, after which they sent an e-mail saying my service was being disabled for SPAM ...(when SolusVM shows 0kb of traffic). Th........

  • Linux - mptbase/MPT Fusion LSI Logic Error mptbase: ioc0: ERROR - didn't initialize properly! (-1)


    kernel 2.6.27.54 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 mptbase: ioc0: Initiating bringup mptbase: ioc0: WARNING - Unexpected doorbell active! mptbase: ioc0: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000001! mptbase: ioc0: ERROR - Diagnostic reset FAILED! (102h) mptbase: ioc0: WARNING - NOT READY! mptbase: ioc0: ERROR - didn't initialize proper........

  • VPS Server Scam/Review/Complaint List


    These are the only two I've encountered but here is the low-end and note my story is not at all unique. In my case I was scammed out of money and did not receive any service at all from either company. Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support adm........

  • Enable SPAMASSASSIN on Postfix in 5 minutes


    Centos 5 Postfix and SPAMASSASSIN Tutorial yum install spamassassin chkconfig spamassassin on vi /etc/mail/spamassassin/local.cf ############## #required_hits 5 #report_safe 0 #rewrite_header Subject [SPAM] #5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives require........

  • Postfix header_checks using regexp and multiple lines


    I'm posting this because it wasn't easy or obvious how this would be accomplished and the man page leaves it to guesswork. Multi-line body_checks Example 1 /........

  • ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory solution


    ls ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory This is not an ldd problem or case of anything missing, this only happened after I upradedUbuntu. declare -x PATH="/home/user/bin:/usr/local/bin:/usr/bin:/bin:/usr/games" "/home/user/bin" is the problem! It's weird because I have no idea how it happened.........

  • Linux use XMessage to popup a message in XWindows


    xmessage "Your message here" -display :0 This will popup a window with the message, it would be cool if it allowed two way communication though. I found the info in this post: http://en.andregondim.eti.br/?p=72........

  • Convert doc images/jpg/jpeg to PDF


    Use "ImageMagick" which can be installed easily on most UNIX/Linux distros. Remember that it will go with the standard file listing to determine the order but I believe you can manually specify multiple jpg's in the arguments. Convert image/jpg to PDF convert *.jpg yourpdf.pdf This is a very handy and free tool. Convert DOC/TXT documents to PDF If you wanted to convert a .doc file or text........

  • OpenOffice Calc SUM function not working Solution - Result is always 0/apostrophe appears in front of all numbers.


    I right clicked all applicable cells and chose "number" but that's enough. I notice when I click the cell there is an invisible ' in front of the number: '33.64 Calc imported my CSV and decided to add a ' in front of the numeric currency values!!!*Actually the problem occurs when you right click the cells and change the type from text to number, no matter what format you choose. If I change it to be currency i........

  • SSH Tunnel Dynamic Proxy Stops Working Right Away even with Root and High Port


    I keep getting messages like this shortly after using the proxy (it works for a few seconds/page loads and then stops): channel 12: open failed: administratively prohibited: open failed I'm not sure what the issue is unless there's some kind of hardware firewall on the other end. I've used this exact configuration on multiple servers with no issue and even disabled iptables etc..........

  • MySQL NEVER delete ib_logfile0 or ibdata1 or you'll lose data


    don't delete /var/lib/mysql/ib_logfile0 or ibdata1 or mysql won't restart I didn't realize they were internal and not part of replication like the relay files! /usr/libexec/mysqld: ready for connections. Version: '4.1.22-log' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution 110127 16:31:00 [Note] /usr/libexec/mysqld: Normal shutdown 110127 16:31:00 InnoDB: Starting shutdown...........

  • Postfix/Any Email Server check for Open Relay


    The first thing you need to remember is not to check from the same host/server itself. This is a silly mistake I made, the reason is that many mailservers and especially postfix are configured to allow relaying from the localhost/same host. If you do that you'll get a false positive. *Make sure you test from another host/system than the mail server itself! telnet yourmailserverhost.com 25 220 Courier (FreeBS........

  • email server messsages rejected without reverse DNS DNS check failure Client host rejected: cannot find your reverse hostname Cannot resolve PTR record


    Basically you should always be 100% sure that whatever IPyour mail server sends out with has reverse DNS/PTR records. Remember that unless you own your IPs then you won't be able to set your own reverse DNS. Even if you were to create a reverse PTR record on your DNS servers it will be ignored. Reverse DNS is queried to pre-assigned DNS servers of your ISP, so therefore you'll need to contact your ISP/Colo/Hosting provider to do a reverse DNS entry. If you don't have........

  • Postfix Enable SSL/TLS with your certificate


    Create Cert & Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key mkdir /etc/mailssl chmod 700 /etc/mailssl cp server.* /etc/mailssl Postfix SSL config Edit /etc/postfix/main.cf: #SSL stuff smtpd_tls_cert_file = /etc/mailssl/server.crt smtpd_tls_key_file = /etc/mailssl/server.key To make smtps w........

  • CPU #1 not responding - cannot use it.


    I think this will be useful to others because I have a server that kept crashing mysteriously during intense disk usage/RAID checks. It would only crash during the weekly RAID integrity check. ThenI noticed during a reboot that not all CPUs were being brought up, as a result this actually creates much higher temperatures with the output I got from sensors, just booting the system produced higher than normal temperatures. You can imagine that a full blown RAID check........

  • Understanding /etc/aliases from sendmail when using with postfix or other MTA's


    understanding /etc/aliases *remember to apply changes you need to run "newaliases" after editing /etc/aliases one thing I don't get is that it doesn't allow you to specify the whole e-mail address on the left-hand side eg: yourfullemail@domain.com: someotheremail@domain.com postalias: warning: /etc/aliases, line 109: name must be local (if you try the above) It works more like this: your........

  • PHP5 & Apache Blank/White Screen/Page PHP won't work


    PHP5 & Apache Blank Screen/Page The PHP package is installed and works from the CLI Error reporting is enabled The only way I could get it working was: rm /etc/php.ini yum remove php yum install php-* -x php-pear* -x php-pecl* Interestingly enough reinstalling php did not bring back the deleted php.ini but everything is working. ........

  • Ubuntu 9.04 Crash


    CPU/Kernel/MB/RAID problem? Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168] Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........

  • Importing Plesk 8.6 Backup to Virtualmin: Validating migration file .. .. validation failed : XML::Simple Perl module is not installed


    Importing Plesk 8.6 Backup to Virtualmin: Validating migration file .. .. validation failed : XML::Simple Perl module is not installed Solution is to install the correct module: perl -MCPAN -e 'install XML::Simple' Migrating a single domain works just fine, but it doesn't work with a full client backup containing multiple domains.........

  • Installing Webmin & Enabling SSL


    Webmin Setup Centos 5: wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet [1] 24229 [2] 24230 [root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html Resolving downloads.sourceforge.net... 216.34.181.........

  • Virtualmin/Webmin Postfix Error: The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..


    Virtualmin Postfix Error: The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active .. A problem was found with your Postfix virtual maps : No map sources were found in the Postfix configuration .. your system is not ready for use by Virtualmin. ........

  • Linux Realtek Gigabit NIC huge/high latency problem after sleep?


    That is pinging to the gateway IP on the same switch, the same IP is pingable externally without any problems which makes me think the switch is fine. 64 bytes from 55.55.55.55: icmp_seq=4 ttl=255 time=1.07 ms 64 bytes from 55.55.55.55: icmp_seq=1 ttl=255 time=3536 ms 64 bytes from 55.55.55.55: icmp_seq=2 ttl=255 time=2536 ms 64 bytes from 55.55.55.55: icmp_seq=3 ttl=255 time=1536 ms 64 bytes from 55.55.55.55: icmp_seq=8 ttl=255 time=1.20 ms 64 by........

  • Dying Seagate 7200.11 SD15


    [137392.910057] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x80000 action 0x6 frozen [137392.910077] ata4: SError: { 10B8B } [137392.910095] ata4.00: cmd 60/20:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 16384 in [137392.910099] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [137392.910122] ata4.00: status: { DRDY } [137392.910135] ata4: hard resetting link [137393.440060] ata4: SATA link........

  • rsync preserve attributes, permissions/ownership and times without being root non-root user


    One of the purposes of rsync is to backup whole filesystems and archive them but how can you do that properly and restore things to normal if all permissions and ownerships are not preserved from your root filesystem? It's not desirable to have everything running as root, especially not just for an rsync. The Easy rsync preserve permission solution for non-root users sudo is the answer and all you have to do is edit /etc/sudoers At the end o........

  • VirtualBox Convert Import/Boot .vmdk VMWare Hard Disk/Drive Image Won't Work


    I wanted to Import/Use a .vmdk hard disk image file from VMWare. Generally you can just "point" VirtualBox to it and use it and it will work but I found an exception. One of my Centos 4.4 x64 images wouldn't boot. I had two copies, an older one and the newer one. The older one booted as normal (once I changed the VirtualBox driver to IDE from SATA). The newer one stopped at the "GRUB loading" message no matter what I tried. As far as........

  • Outsourced VPS Support


    The Xen VPSI had was not working properly and when they asked for the login information I found the support was coming directly from India: whois 122.178.148.* [Querying whois.apnic.net] [whois.apnic.net] % [whois.apnic.net node-5] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 122.178.128.0 - 122.178.191.255 netname:&........

  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........

  • yum error with some versions of Centos Refusing to automatically import keys when running unattended. Use "-y" to override.


    Refusing to automatically import keys when running unattended. Use "-y" to override. When using echo y|yum install gcc Fix with rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*........

  • mdadm RAID 1 adventures


    I separated the 2 drives in the RAID 1 array. 1 is the old one /dev/sda and is out of date, while the separated other one /dev/sdc was in another drive and mounted and used with more data (updated). I wonder how mdadm will handle this: usb-storage: device scan complete md: md127 stopped. md: bind md: md127: raid array is not clean -- starting background reconstruction raid1: raid set md127 active with 1 out of 2 m........

  • WD (Western Digital) Advanced Format Drive Lagged/Slow Speed/Performance/Design Flaw EAD/EARS problem WDC WD20EARS-00S8B1


    Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive. This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series. To make it worse this is also when Western Digital introduced "Advanced Format" o........

  • mdadm won't boot due to fsck error


    Nov 29 20:17:58 ubuntu kernel: [ 1157.180789] md: md1 stopped. Nov 29 20:17:58 ubuntu kernel: [ 1157.180829] md0: unknown partition table filesystem not responding/reading properly with du or rsync (this needed an fsck). [ 2571.489217] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923106 [ 2571.942299] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923110 [ 2571.9568........

  • EOL for Kubuntu/Ubuntu 8.04 - W: Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/intrepid/universe/source/Sources.gz 404 Not Found [IP: 91.189.92.171 80]


    I couldn't figure out whyI couldn't install a simple package. This is what's annoying about cutting edge Debian distros, yes we know you support each license on average for 1-2 years but why take down the supporting binary packages and basically disable the older versions? sudo apt-get install update Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find p........

  • http://apt.sw.be/redhat/el5/en/i386/test/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found Trying other mirror.


    http://apt.sw.be/redhat/el5/en/i386/test/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmforge-testing. Please verify its path and try again Notice it is complaining about "rpmforge-testing", just disable it for now: Solution is to edit the repo: vi /etc/yum.repos.d/rpmforge-testing.repo........

  • PHP CURL SSL won't work or connect


    I spent so much time debugging this, most sites don't tell you a very important option to use with CURL and you will only find out this is the problem by running the PHP script from the command line you get the following output that shows the issue (I don't see any way to get this output from Apache itself). * About to connect() to ip.ip.ip.ip port 25000 * Trying ip.ip.ip.ip... * connected * Connected to ip.ip.ip.ip (ip.ip.ip.ip) port 25000 * succes........

  • NotifyByPopup::slotDBusNotificationClosed: 465 -> 0 knotify(31135) NotifyByPopup::slotDBusNotificationClosed: failed to find knotify id for dbus_id 465


    I keep getting this in my SSH/Bash console: NotifyByPopup::slotDBusNotificationClosed: 465 -> 0  ........

  • Openvz Quick Install for CentOS 5 Tutorial


    cd /etc/yum.repos.d wget http://download.openvz.org/openvz.repo rpm --import http://download.openvz.org/RPM-GPG-Key-OpenVZ yum install ovz-kernel-PAE Now remember to set /etc/sysctl.conf to "net.ipv4.ip_forward = 1" You can apply the change immediately by running sysctl -w net.ipv4.ip_forward = 1 but remember that you still have to set sysctl.conf sysctl -p will load and apply any changes to s........

  • mdadm Linux Software RAID QuickStart Guide


    Create New RAID 1 Array: First setup your partitions (make sure they are exactly the same size) In my example I have sda3 and sdb3 which are 500GB in size. mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sda3 /dev/sdb3 mdadm: array /dev/md2 started. Check Status Of The Array *Note I already have other arrays md0 and md1. You can see below that md2 is syn........

  • Linux Kernel Freeze/Hang during boot on io scheduler cfq registered (default)


    You'll see the following and the boot process will freeze: io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) I have struggled with this issue on vari........

  • Ubuntu 10.04 Linux is still not ready for the Desktop world


    I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD. Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer). I'll........

  • OpenVZ/vzctl how to do an on-line migration without downtime


    vzmigrate --online dest-host VEIDNO eg.: vzmigrate --oneline 192.168.1.55 101 One option I would recommend is "--keep-dst", that way if the migration is interrupted you can still bring the VPS back up on the original host. After the migration is successful you can manually destroy it. OpenVZ has a good writeup on this including Checkpointing and Restoring etc:........

  • md: kicking non-fresh sda1 from array! - fix/solution


    md: Autodetecting RAID arrays. md: autorun ... md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: md: kicking non-fresh sda1 from array! md: unbind md: export_rdev(sda1) raid1: raid set md0 active with 1 out of 2 mirrors The md0 raid kicked sda1 ou........

  • mencoder Linux CLI video editing how to encode video file into xvid and split by time into multiple parts


    Mencoder is great, you can throw anything at it, including video files from your camera and have it encode into xvid or almost any other format. In my case I took 640x480 video from my Canon and reduced the size by 1/3 with the options below (there are many other options that you can read about in the manual but I like to keep it simple). Mencoder Encode mencoder -ovc xvid -oac mp3lame -xvidencopts fixed_quant=4 -o ........

  • mdadm when a RAID 1 member dies


    [27969.398749] sd 5:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB) [27969.398749] sd 5:0:0:0: [sdb] Write Protect is off [27969.398749] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [27969.398749] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [27972.117543] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [27972.117543] ata6.00: irq_stat 0x48000000 [27972.117543] ata6.00: cmd 60/08:00:ff:7........

  • Linux Burn MP3 CD On the Fly using


    I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project. Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is. I just want to a directory that had the MP3's I wanted t........

  • Realtek r8169 1gbit/1000mbit NIC/Ethernet Goes Down/Halts on Large File Transfer/Heavy Network Usage


    This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason? [655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........

  • FUSE/Curlftpfs mount ftp account as drive partition in Linux


    This is a great way to use your ftp server space, for example on your web hosting account (althoughI believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect. Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc.. Name curlftpfs - mount a ftp host as a local directory Synopsis........

  • XBOX 360 No Sound over HDMI Solution/Fix


    My XBOX's dashboard/firmware was from sometime in 2008 when I first bought the system. I mainly played using composite cables but at my brother in law's house we used HDMI. The very first time it worked, but then I bought some games that did some update and after that HDMI never worked. The symptoms besides having on sound is that your XBOX will show PC monitor resolutions but won't have any option to say you have a 720P or 1080P display, this means the XBOX firmware is fa........

  • Use rcconf to edit startup/init.d/init scripts on Debian/Ubuntu based distributions


    I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL. Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you. apt-get install rcconf Reading package lists... Done Building dependency tree Reading state information... Done........

  • mdadm can you downgrade the superblock?


    Why would you want to downgrade the superblock? Old mdadm verisons like mdadm 2.5.6 only use the 0.90 superblock/metadata and new versions use 1,1.0,1.1 and 1.2 superblocks by default. There are some annoying caveats with this, first of all the new superblocks (later than 0.90) CANNOT be read by GRUB, so you won't even be able to install GRUB. Even worse, old versions of mdadm CANNOT automatically detect arrays even if they were created with a new version of mdadm with th........

  • Openvz Enable Most Common iptables modules


    The default options for iptables are very basic. Here is what you need to do in order to enable them in OpenVZ. 1.) Add the modules to iptables and restart iptables: vi /etc/sysconfig/iptables-config Edit the line as so: IPTABLES_MODULES="ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp" 2.........

  • Unixbench Score on Core i5 750 with OpenVZ Kernel vs Xen/Openvz


    This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel. OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!) # # # # # #&n........

  • chroot into an off-line Linux version using a LiveCD/USB


    It's not just as simple as running the chroot command, you need to ensure the /proc and /dev entries are passed through and populated to the chroot environment. Step 1 - Mount Your Off-lineOS mount /dev/sda1 /mnt Step 2 - Mount Proc mount -t proc none /mnt/proc Step 3 - Mount Dev Most guides will tell you to use this: mount -o bind /dev /mnt//dev but that doesn't work for some reason in many cases: mount: wron........

  • SSH Automatic/Passwordless Logon - Setup Public Key Encryption In Single Command


    This is a very simple solution, but most guides out there make you login twice (once to scp the key) and once to put the key in authorized_keys. There's no need for that. If you don't already have a ~/.ssh/id_rsa.pub just type "ssh-keygen -t rsa" and keep hitting enter until it's done :) Just use this code to easily enable passwordless login with SSHD key=`cat ~/.ssh/id_rsa.pub`;ssh user@192.168.5.25 "echo $key >> ~/.ssh/auth........

  • Choose Which GCC Version to compile with via CC environment variable.


    It's very common to have multiple GCC versions for different reasons, as annoying as it is. Some newer/older programs only compile properly or at all on specific versions. You can export the following variable CC: export CC=gcc-4.1 Replace gcc-4.1 with the filename of the gcc you want eg. gcc-99........

  • Asus Eee PC 1000HE Crashed/Need To Recover/Restore Windows? Easy Solution is Hitting F9


    I'm not a fan of Asus and won't be buying another because of having to fight Asus over a bogus warranty denial (it's a long story but they only replied about how to RMA my unit weeks later on the EXACT day the warranty expired). Anyway, it's just a matter of hitting F9 to do this, there's no need to worry about booting from USB or CD (unless of course you want a different OS eg. Windows XP Pro, Vista/7, or a flavor of Linux or Unix). Also remember that you need to fully/properl........

  • Linux 2.6.33.3 Kernel Error CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function b


    CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function body not available drivers/message/fusion/mptsas.c:462: sorry, unimplemented: called from here make[3]: *** [drivers/message/fusion/mptsas.o] Error 1 make[2]: *** [drivers/message/fusion] Error 2 mak........

  • get_printer_attrs: resource name '/printers/printers' no good! - cups error


    This is what the /var/log/cups/error.log says after my Samsung CLP-310N decided to stop printing. This is a new printer that replaced my CLP-300 and it has been working for a day so far. What happened is that I lifted the top part (not realizing there were rollers on it) and it stopped printing. The network activity light was flashing ,hitting the stop button didn't do anything. Even powering the printer on and off did not help. I have restarted CUPS and SMB on the........

  • Seagate Drive 500GB Drive Dying


    This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART. Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device........

  • Seagate 7200.11 firmware defect in 500GB, 1000GB (1TB) and 1500GB (1.5TB) Hard Drives


    Seagate Inventory/Firmware Check I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate. *Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate! Seagate Inventory/Firm........

  • Linux AHCI Hotswap Tips - Remember To Reread The Partition Table WITHOUT rebooting


    From the package "parted" you can use the command "partprobe" to re-read the partition table. I really hate rebooting, and that's what Iloved to hear about AHCI motherboards, that they allow hotswap so you don't have to reboot. But that's only as good as the OS, if the OS does not reload the partition table you won't be able to do anything with that new drive you attached without rebooting. Yes, even without re-reading the partiton table Linux will........

  • Picking an FTPD (vsftpd) Server in Linux Centos/Debian


    I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find. yum search ftp Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: ftp-stud.fht-esslingen.de * base: mirrors.netdna.com * updates: updates.interworx.info * addons: yum.singlehop.com * extras: mirrors.netdna.com rpmforge........

  • Compaq V2405CA Laptop - Unixbench Performance Test


    Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics. # # # # # # # ##### ###### # # #### # # # # ## # # # #&nb........

  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........

  • Photoshop Save Layers as a file


    Photoshop Save Layers as a fileJust click: [quote:64c0c64b5a]File: Scripts: Export Layers to Files[/quote:64c0c64b5a] You can choose an individual layer or all of them. Have fun :)........

  • Live E-mail Verfication


    Live E-mail VerficationTwo very cool tutorials that actually connect to the supposed mail server of whatever address the user specifies to see if the e-mail address actually exists. http://www.devshed.com/c/a/PHP/Email-Address-Verification-with-PHP/ http://www.zend.com/zend/spotlight/ev12apr.php?article=ev12apr&kind=sl&id=1782&open=1&anc=0&view=1#notes........

  • Upgrade Release Kernel Tips


    Upgrade Release Kernel TipsThis is for CentOS 3.1 to 3.8 but the methodology will apply everywhere. I ran into a problem first of all with a non-booting system after running #yum update centos-release It took me to 3.8 and upgraded all the other packages [b:7e931c835d]BUT[/b:7e931c835d] because of some stupid flags enabled in /etc/yum.conf the KERNEL WASN'T UPGRADED SO AFTER BOOTING, WELL IT DIDN'T BOOT OF COURSE :) H........

  • Updating yum repos for DAG /etc/yum.repos.d


    Updating yum repos for DAG /etc/yum.repos.dIn /etc/yum.repos.d [quote:96456b2ab9]Create any file such as "CentOS-Dag.repo" in /etc/yum.repos.d[/quote:96456b2ab9] Add the following to the above file: [code:1:96456b2ab9] [dag] name=Dag RPM Repository For Red Hat Enterprise Linux baseurl=http://dag.atrpms.net/redhat/el$releasever/en/$basearch/dag/ http://dag.freshrpms.net/redhat/e........

  • Xorg fonts missing Xorg.0.log


    Xorg fonts missing Xorg.0.logThis happened on a PCBSD installation but it could happen on any Unix/Linux Xorg installation: If the text on your screen is too small and you're running at a high resolution if you do a [code:1:04ca0d3455]cat /var/log/Xorg.0.log | more [/code:1:04ca0d3455] You'll see a bunch of fonts missing, specifically the 75dpi and 100dpi ones that you really need :) (WW) The directory "/usr/X11........

  • The New Chips on the Block


    The New Chips on the BlockThe New Chips on the Block By Bruce Gain Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html 02:00 AM Jun. 13, 2005 PT We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........

  • Intel's Finnish Fetish


    Intel's Finnish FetishIntel's Finnish Fetish By Dave Mock June 13, 2005 Chipmaker Intel (NASDAQ: INTC) has successfully topped the personal computer market for decades. Breaking into related areas such as communications has been much difficult for the world's largest semiconductor maker. But a new partnership with Nokia (NYSE: NOK) could help to change that. Intel's forays into cellular-phone and home-entertaiment-device chips have........

  • Tutorials on port upgrades


    Tutorials on port upgradesnice to see a FreeBSD forum http://www.redantigua.com/portupgrade.html http://www.onlamp.com/pub/a/bsd/2003/08/28/FreeBSD_Basics.html?page=2........

  • MySQL Server 3.23 won't start after switching from 4.1


    MySQL Server 3.23 won't start after switching from 4.1I was using a 4.1 alpha version of mysql-server and some how version 3.23 of the client and 4.1 of the client were also both installed! So I forced uninstalled everything because after trying and trying even though MySQL server was using the short 16byte password authentication I got some other errors. After trying with the ports and having it fail because I had existing database data I force installe........

  • FreeBSD Desktop OSs


    FreeBSD Desktop OSsI would probably choose these over Linux. In many ways these are probably more stable and just as easy to use as any Linux distros but the benefit of stable, updated and secure packages! PC-BSD - http://www.pcbsd.org DesktopBSD - http://www.desktopbsd.net/index.php?id=37 Personally PC-BSD is Beta at this point and is not easy if you are installing it on a non-primary partition. I have not used Deskt........

  • Mounting NTFS in Unix


    Mounting NTFS in UnixJust a quick tutorial to mount your NTFS volumes in Unix (FreeBSD/Linux) [quote:4a9de7bf80]mount -t ntfs -o umask=0 /dev/your_partition /mnt/your_mount_point[/quote:4a9de7bf80] [b:4a9de7bf80]-o umask=0[/b:4a9de7bf80] is to ensure all users can access the mounted partition (otherwise don't use it and only root can access the mounted partition) [b:4a9de7bf80]-t ntfs[/b:4a9de7bf80] is simple because it just lets mount kno........

  • PHPBB Drop All Tables


    PHPBB Drop All TablesSQL Syntax: [quote:75acd496c1]drop table phpbb_auth_access, phpbb_banlist, phpbb_categories, phpbb_config, phpbb_confirm, phpbb_disallow, phpbb_forum_prune, phpbb_forums, phpbb_groups, phpbb_posts, phpbb_posts_text, phpbb_privmsgs, phpbb_privmsgs_text, phpbb_ranks, phpbb_search_results, phpbb_search_wordlist, phpbb_search_wordmatch, phpbb_sessions, phpbb_smilies, phpbb_themes, phpbb_themes_name, phpbb_topics, phpbb_topics_watch, phpbb_user_group, p........

  • Proftp Passive Ports


    Proftp Passive PortsIf you use a locked down firewall you can edit proftpd.conf and tell it something like this: [quote:8419cab1f8]PassivePorts 6170 6270[/quote:8419cab1f8] That would force all passive ftp traffic to ports 6170 6270 which you could then open on your firewall rather than leaving open ports 1024-65000 open........

  • Bash Script Info


    Bash Script Infohttp://www.faqs.org/docs/Linux-HOWTO/Bash-Prog-Intro-HOWTO.html#ss10.5 http://www.scit.wlv.ac.uk/~jphb/spos/notes/shell/shell5.html http://quong.best.vwh.net/shellin20/#LtohTOCentry-41 http://www.cactus.org/~dak/shellscript.html http://db.ilug-bom.org.in/Documentation/abs-guide/ http://pegasus.rutgers.edu/~elflord/unix/bash-tute.html http://heather.cs.ucdavis.edu/~matloff/UnixAndC/Unix/CShellII.html Since bash i........

  • Package management


    Package managementIf you're like me and often like using an older version you'll need to know this. Since all 5.x versions no longer have packages of their own you'll have to use the 5-stable The best way is to set the [b:d5e8972240]packagesite environment variable[/b:d5e8972240] like so in your [b:d5e8972240].profile [/b:d5e8972240]file [quote:d5e8972240]vi /etc/.profile[/quote:d5e8972240] Add this: [code:1:d5e897224........

  • CVSUp the Easy Way


    CVSUp the Easy WayIf you're reading this you probably have never used CVSUp or don't know how. CVSUp can be used for two things or just one if you prefer. *Keeping your kernel up to date *Keeping your port list up to date Start by editing the following file in: [b:76928b387d]vi /usr/share/examples/cvsup/cvs-upfile[/b:76928b387d] It can be quite overwhelming with all the crazy options. Basically there are only 3........

  • African money SCAM


    African money SCAMI have received countless of these sorts of emails where the person claims to be from an African nation which has a deposed finance minister or some other strange situation which puts millions of dollars at their disposal. The only problem is that they need a partner to get the money out. And they have entrusted only you, yes that's right, to donate your bank account information along with SIN number so they can secretly wire the money over and you w........

  • ECS K7S5A Motherboard System Take Up To 2 Minutes To Boot


    ECS K7S5A Motherboard System Take Up To 2 Minutes To BootHi guys, My motherboard is very strange. Sometimes it will take up to a few minutes to post. I have no idea it suddenly started doing this. I have tried everything and all I can figure is that it is somehow related to the USB ports possibly. Why do I say this? Because if I disconnect my scanner the problem occurs less frequently. I only have a printer hooked up to USB now and by........

  • How do you copy a DVD


    How do you copy a DVDHow do you copy a DVDI'm assuming you mean how you can backup your DVD titles? If you are talking movies, you should use AnyDVD and CloneDVD, they are excellent tools for backups. For data CD's, Nero has a DVD-Copy option and that should work well for most purposes. Hope that helps. :D........

  • Use Mozilla Firefox, not Internet Explorer - You'll be glad!


    Use Mozilla Firefox, not Internet Explorer - You'll be glad!Hey guys, I just thought I'd recommend that everyone switch to Mozilla Firefox as their web browser. You can find it at http://mozilla.org It is free and it is much better than IE. It has a built-in popup blocker which works great and most importantly, it doesn't have a million critical security flaws which could compromise your security such as passwords for on-line banking etc..........

  • NEC ND-3500A is great!


    NEC ND-3500A is great!I just picked up an NEC 3500A a few weeks ago and I love it. It is a great all in-one optical drive solution. It can burn DVD/+R-R at up 16x, read at 16x and rewrite at 4x and CD-R at up to 48x! Not bad, but the impotant part is that it delivers consistent high quality burns and the drive is as quiet as I could ask it to be. It's also convenient that it has a lot of hacked firmware for overspeeding of........

  • Basic Port Listing


    Basic Port ListingHopefully someone finds this useful or at least interesting. http://www.sans.org/top20/#u9 Name Port Protocol Description Small services ........

  • Other Security Web Sites


    Other Security Web SitesSeveral websites actively track security issues. This list provides you with the major providers of security information on the Web. Many of these organizations also provide newsletters and mailings to announce changes or security threats: Center for Education and Research in Information Assurance and Security (CERIAS) CERIAS is an industry-sponsored center at Purdue University that is focused on technology and relate........

  • Nice Search Engine Optimization Tools


    Nice Search Engine Optimization Toolshttp://searchenginewatch.com/facts/article.php/2156041 I quickly checked this out and I like the Google tool that helps you determine the popularity of certain keywords and then it gives you other related search terms that those people used to search with. Excellent :)........

  • gnuCash - Alternative to Quickbooks/Quicken and other COTS accounting software.


    gnuCash is available for all main platforms, Linux/Unix, MacOS (FreeBSD anyway), and Windows. You can download gnuCash free from here. It does seem to be fairly full featured and somewhat straight forward, but like so many programs it is missing a few key features or things don't work quite right. It doesn't support importation of CSV files, which is a big minus. And the developers rather than wanting to add support have just dec........

  • Linux Kernel Compilation (Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support ) Error - drivers/net/igb/igb_main.c: In function `igb_up': make[3]: *** [drivers/net/igb/igb_main.o] Error 1


    Linux Kernel v2.6.30.3 102220 blocks CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-x86 CALL scripts/checksyscalls.sh CHK include/linux/compile.h CC drivers/net/igb/igb_main.o drivers/net/igb/igb_main.c: In function `igb_up':........

  • pound a Linux Load Balance and Reverse Proxy


    I have played around with Pound a little bit. It is a reverse proxy and load balancer in one, and it can be used as only a reverse proxy if you like. It is very simple to configure as either, and Pound even senses if one of the systems is down and stops sending requests to the dead server. It supports SSL (but passes the request to the destination server unencrypted) and even the Apache log format. Pound is very simple, fast a........

  • Geoip and Geocity Packages


    The "Geoip" package is available on virtually all Linux and Unix like systems and is very handy in looking an IP address' corresponding country. The homepage of the maintainers is here. They also have a package called "Geocity" which can be downloaded from their site, it is still free and gives you a close indication of the city the visitor is from. You can........

  • Enable/Disable PHP Warnings/Logs and Errors from .htaccess with Apache


    Put what you see below into your .htaccessand it will enable errors and notices. (change on to off and 1 to 0 to disable though) php_flag display_startup_errors on php_flag display_errors on php_flag html_errors on Now you'll be able to see errors and notices but this should really only be used for debugging purposes and only temporarily as it can be a security issue since errors can reveal information you wouldn't want hacker........

  • Create/Enable SSL Certificates for Apache on Linux/Unix Systems eg. Redhat,Centos,Debian


    Shortcut/Easiest Way To Create A Self-Signed Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key Using the above, you instantly create a self-signed certificate valid for 1530 days and you can simply skip to step #5.) below. If You Need a Real SSLCertificate (eg. Equifax/Openssl) then you need to create a CSR request (you'll need to follow Steps 1.) and 2.) in order to create the CSR. You then upload the CSR Certi........

  • MySQL "Got error 28 from storage engine"


    I've gotten this error enough to bother posting about it, because I've come across so many servers where this happens, so what could "Error 28" possibly mean? Is your database corrupt, or is this a sign of a RAID failure/corruption or even worse, bad blocks on a clients system who has no RAID and never took backups? No, check your free blocks, it simply means you have no space. This was the result of a script that was overzealous and backed up the entire database........

  • Windows Vista sysprep.exe /generalize error "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation."


    I wanted to disable the "Administrator" account for security purposes and Iread some "guide" on the internet that recommended that we run "C:WindowsSystem32sysprepsysprep.exe /generalize". I also clicked the option for "Generalize" and the computer rebooted and gave some OOBE error and restarted, and now I get the error above no matter what. I read that some drivers such as ones from AVIRA AV can cause this because they're unsign........

  • Adventures in pre-paid SIM Cards and data GPRS/Edge/3G in China with China Mobile in Shenzhen, Guangzhou, Shanghai, Beijing and other cities


    This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far: You can purchase an "M-Zone" China Mobile pre-paid SIMCard from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all. At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........

  • iPhone Enable Tethering Manually Update ipcc Carrier Settings/Update via SSH


    Everyone says there is a "manual" way of doing it and then they tell you to use iTunes, but if you're like me, you're travelling on business in a foreign country and your laptop does not have iTunes and you don't have a way of getting it and/or don't want it. For this example I'm using the provider "du" in Dubai, UAE (United Arab Emirates) but this method works for virtually all providers. The requirements in this case to truly "manually update........

  • How To Enable 3rd/third party packages in RHEL/Redhat/Centos 4/5 Linux via RPMForge


    It's a bit of a pain that many basic third party tools that aren't put of the main Centos/RHEL repositories are not available unless you compile them or install the RPMForge Repo. *Updated 08/29 with new download location changed from apt.sw.be to rpmforge.sw.be Here's a quick, simple/cut&paste way to do it: wget http://rpmforge.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.i386.rpm rpm -i rpmforge........

  • SAMBA/SMB Share "Write" Access without Delete


    There is a nice mode that Samba supports which you can add to smb.conf create mode=555 This way users can create and write files/directories without deleting (except I believe dirs can be deleted but only if there are no files inside). It's too bad that Linux does not have built-in "write"/"delete" privileges and is something that even Windows 98 can trump.........

  • Hard Drive Not Working/Not Detected By Your BIOS Anymore?


    I was starting to panic because suddenly my 1TB Seagate SATA drive wasn't working,I thought it was a BIOS issue because it seemed to have happened after I tried overclocking my Desktop too much. I tried powering down and waiting, but I still couldn't hear the drive spin up at all. I tried a second 1TB hard drive and it wouldn't work either. I checked all power connections again and again until one of the pins in the MOLEX connector popped completely loose. Th........

  • GRUB "Error 2: Bad file or directory type" 0.97 won


    You can see the problem below, GRUB recognizes my hard drive and sees the partitions but cannot access them. This is from the GRUB boot disc I'm using. What happened is that I had some power issues causing this system's power to be interrupted several times and basically an on/off on/off situation. The system won't boot, I just get a flashing cursor and no message or error from GRUB. Obviously the problem is that my MBR seems corrupt or some other issue. My........

  • Clustered/Distributed Network Filesystems, Which Ones live up to the hype?


    I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems. DRBD I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........

  • Tyan S2735-8M Maximum Hard Drive Limit/Not Working/Doesn't work with 1TB 1000GB hard drives


    Inever saved any of the logs, but basically no matter what OS (Linux)I used, I could not get my 1000GB hard drive to work (Seagate SATA). The BIOS recognizes the drive and fdisk -l shows the hard drive as it should. The tricky thing is that different OS's will give you different results, but don't be fooled. You can't use these larger drives for long. Iwas getting all kinds of seek/IOerrors and also messages that the port could not be read.........

  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon


    This is very disappointing since GlusterFS markets itself as a solution to deploy VPS servers on. On the HNitself I get a Unixbench of about 360. I'm also using an SSH tunnel to secure the communications, but even before that, things seemed very slow. # # # # # # # #####&n........

  • Timezone Change/Updated for Linux/Unix Debian/Fedora/Ubuntu/Centos Change Update Time zone


    In Newer Linux Distros This Way Is Easiest and works on newer versions like Ubuntu, Mint, Fedora, Centos, Debian etc. #if you are missing timedatectl this in newer distros like Ubuntu/Mint/Debian and are using a container like Docker then do "apt install systemd" timedatectl set-timezone America/Vancouver Replace the America/Vancouver with the correct timezone. To see the list you can just type "timedatectl set........

  • sudo: Error dropping capabilities, aborting in Linux Centos 5.3


    For some reason Ikeep getting this error when trying to run a sudo command eg: sudo -u someuser somecommand sudo: Error dropping capabilities, aborting My version of sudo is:sudo-1.6.9p17-3.el5_3.1 and I've heard that version 1.7 fixes everything. The only thing is yum does not think sudo has any update. Iguess the new version has not been committed to the RPM repository yet. This is really a huge and ann........

  • MySQL Restoring And Dumping/Backing UP MySQL Data/Tables/Databases


    Backing MySQL Databases Backing Up/Dumping All Mysql Databases To A Single File mysqldump --all-databases -u admin -p > allmysqldatabases.sql The "-all-databases" clause is pretty obvious isn't it? It means that it will backup all databases. The "-u admin" means login using the user "admin", if you h........

  • iPhone/iPod touch on 3.0 software overheating?


    There have been lots of reports like this going around and Ican confirm my 3GS with 3.0 firmware is overheating as well. It gets quite hot and actually can make your head or hand sweaty when holding it to talk, or simply holding the back cover for any reason. It's a wonder how the device cools itself at all, considering the only thing that could ventilate air are the 2 speakers at the bottom or the single speaker on the front of the device. Apple seems to be making........

  • Unlocked iPhone 3GS and firwmare 3.0 battery short low life horrible


    This is pretty bad, ever since my phone has been unlocked the battery life is horrible. Many others have reported this issue on provider unlocked phones and even jail broken phones. We're talking issues as bad as losing 1% every 3 minutes which is what I seem to have observed as well. For now I'm going to relock the phone, and hopefully a firmware update will address this issue. This is very annoying and it seems apparent this is also happening on 3G phones and that........

  • iPhone Complaint Lock/Standby Disrupts WiFi and uses 3G instead


    Has Apple tried to give a golden egg to the cell phone companies? Has anyone noticed that if you set your lock time to x minutes, the phone doesn't just lock, it goes into standby. When it does this, any WiFi connection you have gets dropped and all push/data functions such as e-mail checking are done through the 3G network. There is no way to change this feature and functionality and it's very annoying, especially if you are downloading something or loading files over the........

  • How to unlock your iPhone 3G/3GS


    First of all you need to be jailbroken, but this is not covered here. Go into Cydia and click "Manage Sources" then "Edit"and add: repo666.ultrasn0w.com Then search for "ultrasn0w" as a package and install it, that's all there is to it, your iPhone is finally unlocked so when you travel abroad you can avoid ridiculous roaming charges, or you can switch providers and use any SIMcard you like. You'd really thi........

  • iPhone 3GS Jailbreak Information & Benefits


    Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore. A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly. In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........

  • iPhone 3GS 32GB "Harsh Review"


    Yes, Iadmit I finally got bitten by the hype as much as I can usually see through it all. Keep in mind this review is of the "stock" phone, no jailbreaking yet which is what really unleashes the customizability and whyI bought iPhone. I had better things to say about this phone before buying it, and it is a great phone, perhaps the best on the market by far, if not because of the Mac OS port onto the iPhone and all the apps, etc, etc. With that said........

  • iPhone Safari Browser and TinyMCE Support


    This is unfortunate and frustrating as many sites use it, a lot of people are frustrated that TinyMCE does not work on the iPhone Safari browser. Apparently the developer of TinyMCE's answer is "talk to Apple about it" It's really frustrating although, I wonder if any other mobile phones are able to use TinyMCE or not, whatever the case is it would be nice to find a solution to use TinyMCE on the........

  • Using a Mac OSX DMG Image in Windows and Converting to Standard ISO Format use dmg2iso


    The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso I'll only cover theLinux version although the Windows pre-built binary works the same way. Download dmg2iso here for free (from the author's website) It's just silly and doesn't make sense that Ubuntu doe........

  • Apple iPhone 3GS and predecessors are leading a revolution


    As much of a computer nerd as Iam, I'm usually a late adopter to technology for a few reasons. Ifeel most new hyped technologies and electronics are mainly fads, and I'm also cheap. Adopting later means you avoid the bugs, kinks and most importantly pay the lowest price, that's me being cheap again :) I never read much about the iPhone but Isaw all the hype around it and until recently I wasn't a big fan of anything Apple until a few years ago I realize........

  • Nokia N97 review, feedback and complaints


    I've had an old Blackberry for a few years and I was ready to spend some serious cash on a nice Nokia. I love the idea of the Linux based Symbian S60 OS, so I was looking at phones like the E63, E71 (both are basically the same, at least CPU/screensize although E71 is thinner, has a 3MP camera, has GPS, and has dedicated buttons to adjust the volume). Then Iheard about the N97 and what a revolution it was supposed to be and it was even compared to iPhone. To........

  • RTL8111/8168B R8169 Gigabit Link slow speeds


    This is the Intel Atom 330 motherboard with integrated Realtek Gigabit NIC (Intel Desktop Board D945GCLF2 Motherboard W/ Atom 330 1.6 GHz Dual Core Processor - Mini-ITX) I cannot achieve more than 15 MB/s, even doing a local transfer through eth0 to it's own IP. 100% 95MB 15.9MB/s 00:06 So this is not a cabling, switch or hardware issue, it seems like a driver or chipset limitation problem. Here is my........

  • SSH Server Slow/Lagged/Delayed Login Response


    This is really something the SSHServer developers should consider. The cause of this annoyance is because of failed DNS lookups on your IPaddress, which is especially common for many dedicated/col-located servers and also computers on internal NAT/private networks. The chances are this is the cause of your SSHSlow/Delayed Login problems. The easy solution to SSH Login Problems Edit /etc/ssh/sshd_config Add this line to disable r........

  • OCFS2 crash


    When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it. More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things. Output of /var/log/messages for OCFS2 Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........

  • Samba SMB Error - Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD


    Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD That happens when trying to use smbclient to connect to a share. The weird thing is that I can authnenticate just fine from Windows XP. It is partially my mistake, I forgot this share does have a password. I've tried authenticating with the correct user and also with "Guest" because this works in Windows. In Linux I ........

  • Configuring OCFS2 Clustered File System on Debian Based Linux including Ubuntu and Kubuntu


    There's a lot of information and guides on OCFS2 for RHELand Centos Linux but the package setup and configuration is slightly different and this has thrown some people off. Installing OC2FS You should install the following packages to get started: apt-get install ocfs2-tools ocfs2console Configure OC2FS In RHEL/Centos the main configuration file is located in /etc/sysconfig/o2cb However in Debian based Linux it is located........

  • 1U Servers are Loud - We Have The Quiet Solution


    I've read a lot of people complaining that their 1U servers are too loud for the office, home or whatever strange places people might want to put them. Whenever Isee the question asked, "what can be done about the noise", you'll see a myriad of silly answers like "you shouldn't have it at home or in your office at all", "1U servers are meant to be loud". These all might be valid points but they're not the solution. A good example is a........

  • Rackable Systems and their Microslice Clustered 1U Servers


    Ithink there has been a lot of negative press towards Rackable Systems. We will give their new solution credit that it is marketed very well, and comes prepackaged and ready to go. But let's cut through the hype of both sides, the people who love this concept and the people who hate it. What Rackable Systems have done is a first, to minimize space, power and costs into small servers. This is great, and many companies have already built their own servers based........

  • Google sued by "SearchKing"


    http://searchenginewatch.com/2165111 This was an interesting article and people should be wary of Google's power. Google's policies and actions against competitors borders on anti-trust, far worse than Microsoft. They are doing the right thing for all of us, Google says selling advertising and links is bad for search engines, yet they don't penalize sites who use AdSense. ........

    • Latest Articles

  • How high can a Xeon CPU get?
  • bash fix PATH environment variable "command not found" solution
  • Ubuntu Linux Mint Debian Redhat Youtube Cannot Play HD or 4K videos, dropped frames or high CPU usage with Nvidia or AMD Driver
  • hostapd example configuration for high speed AC on 5GHz using WPA2
  • hostapd how to enable and use WPS to connect wireless devices like printers
  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730
  • Cloned VM/Server/Computer in Linux won't boot and goes to initramfs busybox Solution
  • How To Add Windows 7 8 10 11 to GRUB Boot List Dual Booting
  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile
  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial
  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif
  • Linux Debian Mint Ubuntu Bridge br0 gets random IP
  • redis requirements
  • How to kill a docker swarm
  • docker swarm silly issues
  • isc-dhcp-server dhcpd how to get longer lease
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian
  • zfs and LUKS how to recover in Linux
  • [error] (28)No space left on device: Cannot create SSLMutex Apache Solution Linux CentOS Ubuntu Debian Mint
    • Copyright © realtechtalk.com 2024