• Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial


    apt install tftpd-hpa #change TFTP_ADDRESS to by setting address to 192.168.1.1:69 or the IP you need, otherwise it will listen on all IPs and interfaces which could be a security risk. # edit /etc/default/tftpd-hpa TFTP_USERNAME="tftp" TFTP_DIRECTORY="/srv/tftp" TFTP_ADDRESS="192.168.1.1:69" TFTP_OPTIONS="--secure"........
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif


    [Wed Nov 01 18:47:08 2023] [error] Unable to configure verify locations for client authentication [Wed Nov 01 18:47:08 2023] [error] SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line [Wed Nov 01 18:47:08 2023] [error] SSL Library Error: 185090057 error:0B084009:x509 certificate routines:X509_load_cert_crl_file:PEM lib It actually gives us a good clue that at last one component of our cert is invalid/improperl........
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian


    This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525. Then nvidia-modeset goes to 100% There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines. https://forums.de........
  • How to access a disk with bad superblock Linux Ubuntu Debian Redhat CentOS ext3 ext4


    Have you ever tried mounting a partition that you exists but you get this error? mount: /mnt: can't read superblock on /dev/sda1. The superblock in this example was bad because the physical disk had corruption and bad blocks/sectors. However, the data was generally accessible and you can always try this trick below (with caution and no warranty). This is specifically for filesystems that place superblocks in multiple locations, which........
  • ImageMagick error convert solution - convert-im6.q16: cache resources exhausted


    convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244. convert-im6.q16: cache resources exhausted `/tmp/magick-27777Al6FGY7dhyKt10' @ error/cache.c/OpenPixelCache/3984. convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244. convert-im6.q16: cache resources exhausted `/tmp/magick-277772Y_-pJnMdT2r1' @ error/cache.c/OpenPixelCache/3984. convert-im6.q16: Distr........
  • File "/usr/local/lib/python3.5/dist-packages/pip/_internal/utils/entrypoints.py", line 12 f"pip{sys.version_info.major}", ^ SyntaxError: invalid syntax python pip3 error solution


    Is python3-pip pip3 not working anymore? Traceback (most recent call last): File "/usr/bin/pip3", line 11, in sys.exit(main()) File "/usr/local/lib/python3.5/dist-packages/pip/__init__.py", line 11, in main from pip._internal.utils.entrypoints import _wrapper File "/usr/local/lib/python3.5/dist-packages/pip/_interna........
  • du - VAS Billing Subscriptions Hack/Scam MLPremiumSub Invascom Astromart Issues Complaint


    If you have du, you may want to check your bill, as you can read about a longstanding issue with fraudulent charges showing up and many users claiming they did not subscribe or solicit those offers. These don't normally show up on new accounts, but they seem to target established users and maybe even users they suspect are not watching their phone or bills, while they are on vacation. These charges can frighteningly happen with 0 interaction from the user despite what........
  • Docker Swarm vs Kubernetes Comparison Guide


    A lot of companies are unsure which solution to choose and many may not be aware of Docker Swarm as an alternative to Kubernetes. One thing that many Sysadmins find is that Docker Swarm is simply easier, quicker to setup and maintain by far than Kubernetes.........
  • When is it time to leave your VPS/VDS Cloud Hosting Provider?


    When Is It Time to Leave Your VPS, VDS, and Dedicated Server Provider? Choosing the right hosting solution—be it Virtu........
  • 2024 Buyer's Guide: How to Choose and Buy the Best VPS/VDS for Your Needs - Tips and Strategies


    In today’s digital landscape, finding a reliable and secure Virtual Private Server (VPS) or Virtual Dedicated Server (VDS) goes beyond just comparing specs and prices. With increasing concerns over data privacy, security breaches, and government surveillance, the wisdom of choosing your VPS/VDS provider based on juri........
  • Mint Ubuntu Linux Gnome Showing Home Directory on Desktop instead of Desktop Directory


    During a migration or other custom setup, it's possible you don't have a $HOME/Desktop and as a result the config file that controls this is set to just use your $HOME directory. This is controlled in the file: $HOME/.config/user-dirs.dirs As we can see below, Desktop, Downloads, Music and Pictures are set to $HOME. We can edit any of these as we like. # This file is written by xdg-user-dirs-update # If you want........
  • Linux how to get list of all timezones on system Ubuntu


    find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV" Africa/Addis_Ababa Africa/Abidjan Africa/Blantyre Africa/Lusaka Africa/Casablanca Africa/Libreville Africa/Asmara Africa/Bujumbura Africa/Dakar Africa/Lagos Africa/Malabo Africa/Harare Africa/Kigali........
  • glib-2.0 required to compile QEMU solution


    ./configure glib-2.0 required to compile QEMU yum install glib2 glib2-devel or on Debian/Ubuntu based: apt install libglib2 libglib2-dev........
  • How To Upgrade Debian 8,9,10 to Debian 12 Bookworm


    Step 1.) Upgrade to Debian 11 first The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful. Step 2.) Update sources.list Update your /etc/apt/sources.list like this: deb http://........
  • apache2 httpd apache server will not start [pid 22449:tid 139972160445760] AH00052: child pid 23248 exit signal Aborted (6) solution Mint Debian Ubuntu Redhat


    If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing. The above results in this less than obv........
  • How To Setup Python3 in Ubuntu Docker Image for AI Deep Learning


    The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself. I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all. docker run -it --runtime=nvidia --gpus all ubuntu bash These works for most images li........
  • How to Configure NVIDIA GPUs with Docker on Ubuntu: A Comprehensive Guide for AI Deep Learning CUDA Solution


    Welcome to our in-depth guide on configuring NVIDIA GPUs with Docker on Ubuntu. This post is tailored for developers, data scientists, and IT professionals who are looking to leverage the power of NVIDIA's GPU acceleration within Docker containers. Whether you're working on machine lea........
  • Linux How To Upgrade To The Latest Kernel Debian Mint Ubuntu


    How to check what kernel version you have/currently running? uname -rm 5.4.0-91-generic x86_64 The above shows us that we are running 5.4.0-91-generic on the x86_64 architecture. The safest way is to stick with the same flavor eg if you're on generic, and say on kernel 5.4.0 then it makes sense to follow what is below. However, if you are migrating or dual booting between newer hardware (eg. you got a........
  • request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted solution


    request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted This is usually caused by a mismatch in architecture and happens frequently in development environments. Here is a example of what caused this issue: Your binaries are based on one architecture Your kernel was compiled with another architecture. Why does this happe........
  • How to upgrade to the latest Python version on Linux Ubuntu Debian Mint 3.11


    A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version. Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended): Step 1 - Add the repo apt-add-repository ppa:deadsnakes/ppa If you get an error about requests then install it:........
  • kernel panic initramfs not syncing cause solution


    Check your initramfs if it's missing /dev/null or /dev/console, this is likely the reason. If you want all actual devices to be created you could also enable devtmpfs in your kernel (.config) and mount like this during init: CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y mount -t devtmpfs none /dev But note devtmpfs will not create /dev/null or /dev/console for........
  • python3 error Ubuntu Linux error solution SyntaxError: invalid syntax line 12 pip{sys.version_info.major}


    This sort of thing normally happens your python3 or pip3 has been updated, because you have to in order to use pip, but the newer pip now breaks compatibility with your old python (3.5 in this case). There are a few solutions, the easiest is perhaps to upgrade to a newer OS with a newer distro provided Python 3 or to manually install a newer version of Python/OR use a PPA like deadsnakes that provides newer versions. ........
  • How to install and configure haproxy on Linux Ubuntu Debian


    haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx. haproxy is used by many large sites per Wikipedia: HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........
  • talib/_ta_lib.c:747:10: fatal error: ta-lib/ta_defs.h: No such file or directory


    If you are installing ta-lib for Python and get this error then you can normally solve it by manually getting the ta-lib source files and compiling. tar -zxvf ta-lib-0.4.0-src.tar.gz cd ta-lib;./configure;make;make install Collecting ta-lib Downloading https://files.pythonhosted.org/packages/39/6f/6acaee2eac6afb2cc6a2adcb294080577f9983fbd2726395b9047c4e13ec/TA-Lib-0.4.26.tar.gz (272kB) &nbs........
  • How to install Windows or other OS and then bring to another computer by using a physical drive and Virtual Machine with QEMU


    This has been a tried and true method for Windows because it is finicky with hardware changes without a reinstall (eg BSOD on boot is what happens 9/10 times unless you move to the same hardwar). Surprisingly, if you use a QEMU VM and do a standard install, it has worked in every system I've thrown the drive in afterwards. So the play is this, use a USB SSD, physical SATA drive plugged internally or for convenience, you could use a SATA to USB adapter on another computer to perf........
  • debootstrap how to install Ubuntu, Mint, Debian install


    In this example we install debian 10 with --variant=minbase which gives us a minimal/tiny install. Don't use variant if you want the full size install. mkdir /tmp/deb10files debootstrap --variant=minbase buster /tmp/deb10files/ Did you get an error? debootstrap --variant=minbase buster /home/theuser/VMs/deb10files/ You'll get this error if you make a directory in your home........
  • Linux grub not using UUID for the root device instead it uses /dev/sda1 or other device name solution


    You can read lots of posts about this issue but there is not much information about why this is the case or how grub determines the root= device name. Some even suggest modifying grub.cfg manually which is a disaster as the next kernel update will cause grub to revert back to the device name. For most people this won't be an issue but those using template system, automated deployments and working in embedded may run into this issue with custom embedded and created minimal kernel........
  • Debian Ubuntu apt install stop daemon questions/accept the default action without prompting


    This can be a real pain when automating things and you do an apt install and some packages ask a lot of questions. Make sure you set this variable when running: DEBIAN_FRONTEND=noninteractive Remember as well that if chrooting you will want to run like this: DEBIAN_FRONTEND=noninteractive apt install -y yourpackagename ........
  • Generic IP Camera LAN Default IP Settings DVR


    If you are converting a generic wifi IP camera to ethernet, it may not be that simple as many are default hard coded to a static IP of 192.168.1.168 and login info admin/admin. From there you can login to the camera and assign it to DHCP by going to http://192.168.1.168 For security these cameras +DVR should be on a separate untagged VLAN or if possible a physically isolated non-internet connected switch/network. The reference below is applicable to many of the r........
  • Kazam video blank/high size and not working when recording solution


    By default it uses raw .avi which takes a lot of space and will not play on a lot of systems. It's best to change the codec to something like MP4. Step 1.) File -> Preferences -> Screencast in Kazam Step 2. ) Change Record With: to H264 (MP4) After that you'll........
  • Cisco UC CME How To Enable Licensed Features


    Router#show license Index 1 Feature: ipbasek9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted Lic........
  • from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60 sys.stderr.write(f"ERROR: {exc}") from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packag


    Solution for python pip3 not working anymore from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60 sys.stderr.write(f"ERROR: {exc}") wget https://bootstrap.pypa.io/pip/3.5/get-pip.py python3 get-pip.py DEPRECATION: Python 3.5 reached the end of its life on September 13th, 20........
  • ModuleNotFoundError: No module named 'pip._internal' solution python


    pip3 install requests Traceback (most recent call last): File "/home/user/.local/bin/pip3", line 7, in from pip._internal.cli.main import main ModuleNotFoundError: No module named 'pip._internal' As a quick and temp fix call the OS installed python and not the user .local/bin installed pip3 /usr/bin/pip3 install requests Collecting requests Cache e........
  • Cisco Switch / Router How To Restore Factory Default Settings


    1.) Make sure your conf register is 0x2102 Do show version and at the very end of the output you will see the Configuration register. show version Configuration register is 0x2102 If the config register is not 0x2102 then enter this command: r1#configure terminal r1(config)#config-register 0x2102 r1(config)#end 2.) Let's Erase the NVRAM/flash........
  • Cisco 2900 3900 Router Password Reset How To Reset Enable Password


    It is a bit different and annoying here for these types of routers/models as you need to physically remove the CF (Compact Flash) and only then, will it enter ROMMON mode (Ctrl + Pause remotely over the console will not do it for us). This means you cannot do this remotely, or at least not without the help of a remote/physical helper. Step 1.) Power off, router and remove CF Disk Slot#2 Go to the router and remove the slot#2 cover uses your hand or it may help to use a........
  • i915 nouveau Nvidia GPU not starting lightdm Xorg failing solution for Could not determine valid watermarks for inherited state


    It may appear to be an Xorg or lightdm/gdm/mdm error but in reality for many users with this issue, it's a driver conflict and issue. I had a system that had two GPUs, an Intel and Nvidia GPU. The only thing that got it working was to remove the nouveau driver and blacklist it so it never came back, then the Intel GPU works fine without these issues. Solution sudo rmmod nouveau add nouveau/other driver to blacklist edit th........
  • amdgpu AMD GPU Xorg Won't Start [3576284.324] (EE) Segmentation fault at address 0x0 [3576284.325] (EE) Fatal server error: [3576284.325] (EE) Caught signal 11 (Segmentation fault). Server aborting


    Here is how Ifixed it on a Mint/Ubuntu install 1.) First download the latest AMDGPU-Pro driver from here: https://www.amd.com/en/support Navigate to your relevant video card: 2.) Download the installer One issue is that by default they give you a version for the latest version of........
  • ssh Too many authentication failures not prompting for password


    If you get this error when trying to SSHto a device or machine and you never even got a password prompt: Too many authentication failures This means that either the remote side is configured for key auth only, OR your client side may be attempting to auth using mulitple keys, and that exceeds the amount of attempted authorizations on the remote ssh server. If the issue is trying to auth too many times which ssh defaults to sending the keys to, you ca........
  • LightDM Mint Ubuntu Debian won't start errors Nvidia Graphics


    This error implies that there may be an issue with Xorg or maybe your NVIDIA GPU cannot start or initialize: 35 laptop kernel: [ 2031.857704] nvidia: loading out-of-tree module taints kernel. 35 laptop kernel: [ 2031.857724] nvidia: module license 'NVIDIA' taints kernel. 35 laptop kernel: [ 2031.857725] Disabling lock debugging due to kernel taint 35 laptop kernel: [ 2031.873280] nvidia: module verification failed: signature a........
  • How To Upgrade Linux Mint 18.2 to 18.3 to 19.x and 20.x


    Linux Mint offers an easy and painless upgrade path through the last 3 versions, which means no more reinstalling to stay current with the latest version. The only catch is that you need the latest of each version, so for 18, you need 18.3 before you can go to 19, and then 19.3 (or latest), until you go to 20. However, it's really a small price to pay and on the machines we've tested, the upgrade went seamlessly each time (although sometimes video drivers/custom kernel modules l........
  • MP3s Won't Play / ID3 Version 2.4 Issues in Cars and Other MP3 Players/CDs/DVDs Solution


    ID3 2.4 can cause various MP3 players, especially on vehicles or even computers, not to play or at least not to display the ID3 tags. In many cases though, since ID3 2.4 is much different than version 2.3, it will cause some players, especially in cars like Lexus not to play. Even on the computer, you may notice if you check the properties of the MP3 that it won't open or show any details (eg. frequency, bitrate and ID3 tags). One symptom of this in a vehicle (eg. Leuxs,........
  • How To Do Linux Network Bonding Teaming in Mint Debian Ubuntu


    Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows. There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........
  • LXC Containers LXD How to Install and Configure Tutorial Ubuntu Debian Mint


    If you are using mint, delete the preference that stops snap from installing (as it is required for lxc) sudo rm /etc/apt/preferences.d/nosnap.pref 1. Install lxd: sudo apt install lxd Issues install lxd or errors? Click here Debian at this time does not have lxd so you'll need to use snap: sudo apt in........
  • GlusterFS HowTo Tutorial For Distributed Storage in Docker, Kubernetes, LXC, KVM, Proxmox


    This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory. Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage. One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........
  • (firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory) Solution


    (firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory) ExceptionHandler::GenerateDump cloned child 9743 ExceptionHandler::WaitForContinueSignal waiting for continue signal... ExceptionHandler::SendContinueSignalToChild sent continue signal to child [Parent 9562, Gecko_IOThread] WARNING: pipe error (40): Connection reset by peer: file /build/firefox-EymEXX/fire........
  • Vbox Virtualbox DNS NAT Network Mode NOT working


    There is a random bug that sometimes occurs with Vbox NAT mode DNS, although it has never happened in the past and Vbox was working fine until recently. The symptom is that you can see it does get an IP+ DNS from the Vbox NAT DHCP. Below we use resolvectl dns and verify the DNS server is set to 10.0.2.3 which is the DNS from Vbox NAT. We can ping it but it does not respond to any DNS requests when we use dig @10.0.2.3 realtechtalk.com........
  • Docker Tutorial HowTo Install Docker, Use and Create Docker Container Images Clustering Swarm Mode Monitoring Service Hosting Provider


    The Best Docker Tutorial for Beginners We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........
  • How To Create OpenVPN Server for Secure Remote Corporate Access in Linux Debian/Mint/Ubuntu with client public key authentication


    Why choose OpenVPN instead of a firewall appliance? OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time. When comparing OpenVPN with traditional firewal........
  • HongKong VPS Server, Cloud, Dedicated Server, Co-Location, Datacenter The Best Guide on Hong Kong, China Internet IT/Computing


    In our 2024 VPS Server/Cloud Buyer's Guide, we place the location of your VPS/hosting/server as one of the priorities that is often overlooked. 2024 Update - Datacent........
  • ssh-keygen id_rsa private key howto remove the passphrase so no password is required and no encryption is used


    The key is that you need to know the passphrase to do it, if you don't know the password for the key then you can't remove the key since it cannot be decrypted. ssh-keygen is the easiest method and openssl can be used to manually remove the key and output it to a new file, which you can then copy back over top of the encrypted file. After that your public key authentication will work without any password prompt because it is no longer encrypted. Make sure you understand........
  • Wazuh / OSSEC Install and Configuration Howto Tutorial Guide for Monitoring Agents SIEM


    How To Install Wazuh Server / Quickest Installation Wazuh (forked from the well known OSSEC project) is a full SIEM (Security Information Event Management) that works extremely well with the platforms it natively supports as an "Agent", which allows you to do scans of everything such as all processes running, CVE vulnerability check, incident reporting etc... Prerequisites: A lot of issues with Wazuh seem to be caused by i........
  • Ansible Tutorial - Playbook How To Install From Scratch and Deploy LAMP + Wordpress on Remote Server


    1. Let's work from an environment where we can install Ansible on. If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way: sudo apt install gpg sudo add-apt-repository ppa:ansible/ansible sudo apt update........
  • QEMU/KVM How to Hot-add A Virtual Disk .raw/.qcow2 via QEMU Monitor Commands


    For a lot of reasons, it may be convenient to detach or attach live disks to a running VM without having to reboot it. Sure, you can use some network based storage, but when performance counts, attaching a new virtual disk will usually give you better throughput and lower latency in a quick testing situation. This doesn't work, why not? drive_add 0 if=virtio,file=/tmp/vm.qcow2,if=virtio,format=qcow2,id=rtt Can't hot-ad........
  • Linux Ubuntu Debian Centos Mint - How To Check if Intel VT-x or AMD-V Hardware Virtualization is Enabled?


    From the terminal do this: cat /proc/cpuinfo|grep -E "svm|vmx" You should get output like this(svm = AMD-v and vmx=Intel-VTx): flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqd........
  • Windows Cannot Format USB drive Device Media is Write Protected Error Solution


    First of all make sure that you don't have the write-lock or write-protect switch enabled on the SDCard or USB drive. If the above is not the case, then follow these instructions: Solution - Clear Read Only Attribute Hit "Windows Key+R" and enter "cmd" to enter the command prompt: Now type the following :........
  • Linux Mint 20 cannot install snapd missing solution


    The Linux Mint team has disabled it by setting an apt preference, you can edit or just remove the file: sudo apt install snapd Reading package lists... Done Building dependency tree Reading state information... Done Package snapd is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source........
  • How to install Kubernetes with microk8s and deploy apps on Debian/Mint/Ubuntu Linux


    Kubernetes Easy Beginners Architecture Guide Kubernetes is known as container orchestration and we should start at explaining the container part of it. A Container is what runs the actual application and based on an Image, and are more comparable to something like an LXC Container, Virtuozzo/OpenVZ using the Linux Kernel Namespaces feature. Containers run these images as independent, isolated operating environments under the OS's exist........
  • Cisco Switch Howto Reset Password


    This was done on a 2900 but applies to all the switches of the same era. Step 1 - Power Cycle and enter recovery mode If you have physical access you can power cycle and hold the mode button down for 15 seconds. After that the SYS light will flash on the switch and you will see the following screenshot. If you don't have physical access (eg. it is a datacenter swich over console only) then power cycle and hit "Ctrl+Pause/B........
  • bash how to hide username/customize prompt Linux Debian Redhat Ubuntu Solution


    Just edit your ~/.bashrc and add this at the very end: export PS1="realtechtalk.com" Then your prompt will look like this: bladeblox:uptime 08:47:14 up 48 min, 1 user, load average: 1.00, 1.07, 0.96 If you wanted a dollar sign at the end then you would change it like this: export PS1=&........
  • Cisco Router Password Reset Howto Guide Solution Cannot Login /Unknown Enable Password 2600, 2800, 2900, 3900


    It is common that you may get access to undocumented equipment and need to reset the password. This applies to many Cisco routers whether 2600, 2900, 3900 etc... Cisco's Guide says to hit Ctrl +Pause/Break but if it doesn't work on some devices causing people to say "cisco password reset pause break does not work", you can see Cisco's alternative key combinations here:........
  • How To Resize, Reduce a Video to a Specific Size and Quality Ubuntu Linux using ffmpeg


    This is a common issue when e-mailing or uploading video files. One note is that you should make the filesize you choose below about 20% smaller than you need. For example I took a 219MB video and told it to be 20M. The resulting file was still about 21.9M but it was OK when I said 18M and was barely below the 20M size. ffmpeg is our friend here, just use this command: Change the -fs 100Mto the size you want eg. 20M, 500M Chan........
  • EFI PXE grub2 Howto guide for Linux EFI PXE Booting on Debian, Mint, Ubuntu, RHEL


    Just a quick note and warning is that if you are testing to see if EFIPXE booting works on a VM, MAKE SURE it actually works. For example Iinitially tested using my Distro's QEMU 2.5+dfsg-5ubuntu10.46 and ovmf BIOS firmware (OVMF supports EFI). However, I found on old versions of QEMU (like 2.5), EFIbooting with GRUB NEVER works so it may appear that you have made a mistake when everything is fine when you boot a physi........
  • Juniper JunOS Command Overview and Howtos Switch, Router, Firewall Tutorial Guide


    Enable "cli" mode equivalent in JunOS cli Configure Mode configure So rather than going to the console on a Cisco switch and typing "enable" and then "conf t", the equivalent in JunOS is "cli" and "configure". How Do You Apply Changes You've Made? You can make all kinds of changes to the switch, but remember they are not........
  • Linux Grub not booting the intended kernel solution in Debian, Mint, Ubuntu how to specify which kernel to boot by default


    Traditionally kernels were numbered starting from 0 but by default the "new style" of grub boot loading considers each subkernel item to be different so if you have 3 entries for 4.40-148 rather than counting for 1. To get the expected behavior let's show this example and how we can boot it We do a grep on menuentry in /boot/grub/grub.cfg to see all of the bootable kernels rather than scrolling through loads of extra entries we don't care about (thou........
  • QEMU KVM Keyboard Problems Not Working Right Repeating Characters, Ctrl+C Copy and Paste not working right when using PS2 mouse in guests Solution


    It seems that QEMU/KVM's default PS2 mouse and keyboard doesn't work right in most cases. I have especially observed issues using Ctrl+C and Ctrl+V and in Linux you may see repeated key presses in the terminal and you will wonder why you copied something and it's not in the clipboard when you try to paste. The way to temporarily fix it is to press the key that is repeating once(works in Linux but not really in Windows). Sometimes when moving your mouse it will also s........
  • Linux how to compile binary with static sharedobjects embedded instead of dynamic to use on multi-distributions and avoid glibc compatiblity issues


    One simple flag to configure will create a makefile that statically links all the shared objects and embeds them instead the binary execute. This means as long as you have the same architecture that things should run. Eg. if you have an old version of Debian with a different version of glibc, then this will solve that problem. ./configure LDFLAGS="-static" To test that it is really statically linked run ldd: ldd src/wget........
  • /bin/sh: msgfmt: not found error solution on Linux Compilation Ubuntu Debian Mint Centos


    If you get this error, you were probably compiling some sort of binary or package and got this error. It is normally solved by installing the "gettext"package. On Debian/Ubuntu just apt-get it: apt-get install gettext After that you should be able to configure and make (compile) properly.........
  • Mikrotik RouterOS CHR/ISO Basic and Quick Setup Howto Guide


    Many people may not be aware that you can turn commodity hardware into a Mikrotik OS and there are various options which is "CHR" (Cloud Hosted Router) which is a VMimage meant for Virtualization only (seriously, I've tried to dd the image to a physical server and it just crashed as it does not contain any drivers for physical). One note as well if you are trying to do a baremetal install you may get an error "Error Loading Operating System" or........
  • qemu 4 compilation options


    How To Compile QEMU Manually (using sensible options) 1.) Download the QEMU source file you want. wget https://download.qemu.org/qemu-4.2.0.tar.xz 2.) Extract The Source File tar -Jxvf qemu-4.2.0.tar.xz 3.) Switch to the extracted source cd qemu-4.2.0 4.) Make sure we have the right libraries and tools to compile QEMU manually sudo apt install build-e........
  • CentOS 7 8 How To Disable SELinux


    To disable selinux temporarily and immediately: setenforce 0 To make it permanent edit /etc/selinux/config: vi /etc/selinux/config........
  • Wordpress How To Add Featured Image To Post in Hueman Theme


    It is different than other Wordpress templates. You have to edit the following file: wp-content/themes/hueman/parts/single-heading.php Add the following PHPcode to the bottom: ........
  • Scanner not working in Linux Ubuntu Fedora Mint Debian over the network? Use sane-airscan!


    I have a Canon MF642c and the scanner wouldn't work. I tried to use saned but it didn't work with the BJNPlike it did for some other Canon models. Introducing sane-airscan with packages for the most common distributions: https://software.opensuse.org/download.html?project=home%3Apzz&package=sane-airscan http........
  • ffmpeg how to cut certain parts of video out


    With ffmpeg it literally takes out what you want so you can use it later. Eg. below -ss means starting time is 16 minutes and 30 seconds and -to means extract until 17 minutes and 23 seconds -i = the input file output file = CCME-flash-and-2-phone-setup-final.mp4 ffmpeg -i CCME-flash-and-2-phone-setup.mp4 -ss 00:16:30 -to 00:17:23 -c copy CCME-flash-and-2-phone-setup-fin........
  • ffmpeg how to concat and join two video clips


    This normally works but if not use my mencoder solution if the output video does not play past the joined time. the contents of list.txt need to look like this: file somefile.mp4 file somefile2.mp4 then run ffmpeg ffmpeg -f concat -i list.txt -c copy CME-2-router-dial-peer-final.mp4 The result is almost instant joining since there is no video processing since we are........
  • mencoder instead of ffmpeg to join or concatenate video files with different audio streams


    The problem for me is that Ihad two videos with different types of audio streams. ffmpeg would join them but they would not play past the point of the join. So Iused mencoder like below and it joined the audio and made them both mp3 streams and it worked! -oac mp3lame specifies the audio to be convered into an mp3 stream using the lame codec. after the oac the two files are the ones to be joined. the -o is the name of the outp........
  • How To Replace Audio Track of Video using ffmpeg


    A very common use case is that you don't want to waste time using a video editor that requires you to open it up and manually import the video clip and audio clip, then manually delete the old audio track and import the video and new audio. That's too much work and time since we don't want to go through the hassle. ffmpeg is our solution, all we have to do is specify 3 variables and we're done! -i Windows2019-Server-Noaudio.mp4 is our in........
  • How To Setup a Cisco CME (Cisco Manager Express) Virtual Router under Linux using dynamips and dynagen


    This tutorial will get your router up and running using emulation tools. In this case we'll be getting a Cisco C7206 (C7200 series) VXR router going which also supports SCCP VOIP services. dynamips is the emulator itself and dynagen is the front-end tool that helps us control everything. It is used by tools such as gns3 and eve-ng. Together the two tools (dynamips and dynagen) allow us to create and emulate REAL router........
  • Virtualbox Error Cannot register the hard disk because a hard disk with UUID already exists solution


    Cannot register the hard disk '/some/path/windows-marking.vdi' {f54def00-2252-43f5-9178-0998636cad61} because a hard disk '/other-path/windows-marking.vdi' with UUID {f54def00-2252-43f5-9178-0998636cad61} already exists. Result Code: NS_ERROR_INVALID_ARG (0x80070057) Component: VirtualBoxWrap Interface: IVirtualBox {0169423f-46b4-cde9-91af-1e9d5b6cd945} Callee RC: VBOX_E_OBJECT_NOT_FOUND (0x80BB0001)........
  • apcupsd how to setup and monitor APC UPS units


    It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc.. wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866 tar -zxvf apcupsd-3.14.14.tar.gz cd apcupsd-3.14.14 [root@somebox apcupsd-3.14.14]# ./conf........
  • How To Password Reset, Recover, Bypass, Remove and Unlock on Windows 10,8,7,Vista,XP,NT,2000,2003,2008,2012,2016,2019 Administrative Login Programs


    If you've come here, don't be embarraassed, working in IT, this is the MOST common computer problem that almost everyone will encounter. The reason why I'm doing this post is because I've seen an increase from colleagues and admins having this problem and many times it's not even your fault. A common scenario is that someone acquires a new or used computer which they weren't given the password for. Fortunately Ihave a detailed list of all the options whether free or pa........
  • Nvidia Ubuntu Linux Screentearing Video with solution driver


    This seems to happen on most if not all Nvidia cards but the good news is that if you are using any of the Linux drivers and have the nvidia-settings tool installed it is just a simple command. Solution: nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }" Enter the above command in your terminal and the screentearing will be fixed which is like enabling Tear Free on AMD cards.&........
  • Linux NIC connecting at 100M instead of 1000M gigabit speeds? It could be overheating


    I was using a small box as a router and one of the ports started going off and coming back at 100M. I truly believe it is simply that it was a case of overheating. Although CPUtemps were only about 67 degrees, the physical box itself was almost burning hot. Isolved the cooling issue and never had the issue again. Jul 28 15:09:27 swithbox kernel: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jul 28 15:09:28 swithbox kernel:........
  • "This kernel requires the following features not present on the CPU: cmov Unable to boot - please use a kernel appropriate for your CPU.


    You should only get this if you are using a Pentium II or something really old. The problem here is that newer kernels than 2.6 don't have true i386 support even if you tell it to compile as i386. It will still include features like cmov that break older computers from being able to work. Generally for very old computers like above, you need to use a 2.6.x kernel and of course make sure it is i386 and all the binaries are as well. ........
  • CentOS 6 impossible to compile a newer libguestfs


    yum -y install gcc make gperf genisoimage flex bison ncurses ncurses-devel pcre-devel augeas-devel augeas readline-devel checking for cpio... cpio checking for gperf... no configure: error: gperf must be installed configure: error: Package requirements (augeas >= 1.2.0) were not met: Requested 'augeas >= 1.2.0' but version of augeas is 1.0.0 yum remove augeas augeas-libs augeas-devel wget http://downl........
  • How To Get Started on Ubuntu with gpt-2 OpenAI Text Prediction


    apt install software-properties-common add-apt-repository ppa:deadsnakes/ppa apt update apt install python3-pip apt install python3.7 curl gnupg python3.7-dev git ln -s /usr/bin/python3.7 /usr/bin/python3 pip3 install numpy keras_preprocessing curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add - echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........
  • QEMU-KVM KVM Command Line Practical Guide


    Iam going to build this based on a series of small howto QEMU / KVMposts I've made as I feel much of the information is actually hard to find and piece together from the rest of the web. What I'm going to focus on is how to use virtio as the NIC because if you don't you get very slow NIC speeds but with the virtio NIC model you basically get host speeds. /usr/libexec/qemu-kvm -enable-kvm -smp 8 -m 16000 -net user -net nic,model=virtio -drive file=ubuntu-gpt2l........
  • virt-resize: error: libguestfs error: could not create appliance through libvirt.


    This is caused because the user is running as qemu for virt-resize and if qemu does not have privileges to read from the source and write to the destination, it will fail with the below. So either change the uid of qemu or change the ownership of the source and target. Solution: export LIBGUESTFS_BACKEND=direct virt-resize --expand /dev/sda2 /root/kvmtemplates/windows2019-eval-template.img /root/kvmguests/kvmkvmuser4515........
  • Asterisk Does Not Retry When Authentication Fails


    When authentication times out that is one thing, but when it just fails like below Asterisk by default will not re-register until you the admin reload the sip or asterisk server: voipserver*CLI> sip show registry Host dnsmgr Username Refresh State&........
  • How To Speed Up Linux Ubuntu and Debian Based Computers By Improving CPU Performance and Changing the CPU Governor


    I used to believe that for Desktops especially that the "ondemand" CPUfrequency changing that kernels included with Ubuntu and Debian based distros have would be sufficient for snappy performance. However, you can feel the lack of performance on the fastest computer if you have ondemand. A lot of times even under high load 100% of your CPUfrequency in MHz will not be used. For example a 2.8Ghz CPUmay only run at 1.8MHz or even .9GHz. Now........
  • How To Install NextCloud on Centos 7 and Centos 8


    yum -y install wget unzip wget https://download.nextcloud.com/server/releases/nextcloud-18.0.2.zip unzip nextcloud-18.0.2.zip yum -y install php php-mysqlnd php-json php-zip php-dom php-xml php-libxml php-mbstring php-gd mysql mysql-server Last metadata expiration check: 0:58:02 ago on Fri 13 Mar 2020 02:12:49 PM EDT. Dependencies resolved. ===================================================================........
  • ERROR: Could not find a version that satisfies the requirement PIL (from versions: none) ERROR: No matching distribution found for PIL


    pip install PIL ERROR: Could not find a version that satisfies the requirement PIL (from versions: none) ERROR: No matching distribution found for PIL The import name is PILbut the actual pip package is called "Pillow" pip install Pillow........
  • How To Install python 3.4 3.5 and up on Linux with wine - Working Solution


    This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu! Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........
  • OpenVZ vs LXC DIR mode poor security in LXC


    It is unfortunate that LXC's dir mode is completely insecure and allows way too much information from the host to be seen. I wonder if there will eventually be a way to break into the host filesystem or other container's storage? OpenVZ better security: [root@ev ~]# cat /proc/mdstat cat: /proc/mdstat: No such file or directory /dev/simfs 843G 740G 61G........
  • Radeon R3 GPU on Debian Crashing


    Occasionally my whole screen locks up and I cannot even swith to the console and I find this in my syslog: *-display description: VGA compatible controller product: Mullins [Radeon R3 Graphics] vendor: Advanced Micro Devices, Inc. [AMD/ATI]  ........
  • KMODE EXCEPTION NOT HANDLED - QEMU/KVM Won't Boot Windows 2016 or 10 Image or Physical Machine


    This should work but the key thing is having the "-cpu host" flag. Once you add the correct -cpu host flag then it should boot just fine on KVM. qemu-system-x86_64 --enable-kvm -cpu host -smp 8 -m 8192 -drive format=raw,file=the-file.img Examples can be found here on how to boot Windows properly with KVM.........
  • SSH How To Create Public/Private Key Pair and with a Larger Keysize than 2048 bits


    The problem is that by default ssh-keygen loves to generate an easy to crack 2048 bit key (RSA). Supposedly having a larger keysize helps such as 4096 or 8096 but it is thought to be useless still against Quantum computing. How can I check my existing keysize and type? ssh-keygen -lf /path/to/your/id_rsa.pub The output will be something like below followed by the hash. The first number is the key size and the second part will b........
  • chown how to change ownership on a symlink


    If you just do a normal chown user.user somedir it won't work. You will see the ownership is still the previous owner. How To Change Ownership Of Symlink: The simplest part is just adding the -h which means no dereference so it applies the ownership on the symlink and does not try (and fail) to change ownership of the dereferenced symlink destination. chown -h user.user somedir........
  • how to use ifplugd in Linux to execute a command or script when a NIC cable is unplugged or plugged in


    It is fairly simple to use once you know how to use it. However, the tricky thing is that by default it doesn't seem to be active or listen on any interface on manually specified. How To Install ifplugd First we install ifplugd sudo apt install ifplugd Let's enable it on our desired device(s) vi /etc/default/ifplugd set this line as so:........
  • dd how to backup and restore disk images including compression with gzip


    dd is a very handy tool and there are some more practical things we can do. For example if we want to dump a 3TB drive and want to preserve it and only 200GB are being used on the 3TB we can save a lot of space with gzip. Backing Stuff up with dd How to Use dd to backup a raw hard drive and tar gzip at once Change /dev/sda to the drive you want to backup Change /mnt/extras........
  • mpv / mplayer with Radeon / AMD GPU Video Card Driver enable VDPAU GPU Accelerated Video Decoding


    The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration. Let's manually play with vdpau to make sure it works before we make it permanent: First make sure you have libvdpau installed: sudo apt install vdpau-driver-all If yo........
  • Ubuntu Linux Mint Debian xorg performance and tear-free tuning for AMD Radeon Based Cards


    I find that the default settings for the radeon driver that is applied to most AMD cards is horrible. For example by default TearFree is not enabled and it causes videos to have some kind of square artifacts. Here are the settings I have found most suitable for AMD cards: You need to create file in the following path and restart Xorg or your computer to apply it: *Beware that making a mistake here will possibly make your computer........
  • MariaDB / MySQL Reset Root Forgotten Password on Centos 7


    mysql reset root password. Oops I can't remember my MySQL root password! [root@centos7test etc]# mysql -u root -p Enter password: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) First we need to stop mariadb: systemctl stop mariadb Now we need to restart it with skip-grant-tables whic........
  • Centos 7 How to install Mysql/Mariadb


    yum -y install mariadb-server systemctl start mariadb mysql_secure_installation Now we need to secure our install and set the MariaDB root password: The lines you need to act on are marked in bold shown with the answer you need. mysql_secure_installation NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB SER........
  • Ubuntu Debian Linux Mint r8169 r8168 Network Driver Problem and Solution


    This problem has been around forever, Linux seems to think it is fine to use the r8169 driver for an r8168 NIC but this often causes problems including the link not working at all. In my case ethttool shows the link up and detected but it simply does not work especially on a laptop that has been resumed from suspension. Sometimes it takes several minutes for it to work or to unplug and replug the ethernet. Here is the solution: Install th........
  • Linux 3D Performance benchmarks with glxgears 59-60fps solution


    You need to disable vsync like this when running glxgears: vblank_mode=0 glxgears For Nvidia drivers do this: __GL_SYNC_TO_VBLANK=0 glxgears Notice the higher than 59-60 fps results with vblank_mode=0: ATTENTION: default value of option vblank_mode overridden by environment. 7919 frames in 5.0 seconds = 1583.704 FPS 8187 frames in 5.0 seconds = 1637.266 FPS........
  • How To Install Asterisk 16 17 on Debian Ubuntu Linux


    Downloading and compiling from source to get the latest version of Asterisk is really simple with this guide. apt install gcc make g++ libedit-dev uuid-dev libjansson-dev apt install libxml2-dev sqlite3 libsqlite3-dev wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-16-current.tar.gz tar -zxvf asterisk-16-current.tar.gz cd asterisk-16.6.2/ ./configure If you get this error change y........
  • Linux Console Login Screen TTY Change Message


    This is all controlled by /etc/issue You can basically enter anything in there that you like, but there are preset variables that are mentioned at the end of the page that discuss this. Some examples of /etc/issue: Centos 7: S Kernel r on an m Ubuntu 16.04: Ubuntu 16.04.6 LTS n l You can also insert any of t........
  • Debian Ubuntu Mint rc-local service startup error solution rc-local.service: Failed at step EXEC spawning /etc/rc.local: Exec format error


    Oct 18 11:06:46 server systemd[529]: rc-local.service: Failed at step EXEC spawning /etc/rc.local: Exec format error Oct 18 11:06:46 server systemd[1]: rc-local.service: Control process exited, code=exited status=203 Oct 18 11:06:46 server systemd[1]: Failed to start /etc/rc.local Compatibility. Oct 18 11:06:46 server systemd[1]: rc-local.service: Unit entered failed state. Oct 18 11:06:46 server systemd[1]: rc-local.service: Failed with result 'exit-code'.........
  • python import docx error


    sudo pip3 install python-docx [sudo] password for : Downloading/unpacking python-docx Downloading python-docx-0.8.10.tar.gz (5.5MB): 5.5MB downloaded Running setup.py (path:/tmp/pip_build_root/python-docx/setup.py) egg_info for package python-docx no previously-included directories found matching 'docs/.build' warning: no previously-included files matching '.DS_Store' foun........
  • qemu-kvm error "Could not initialize SDL(No available video device) - exiting"


    Now older versions of qemu-kvm didn't throw this error say if you just had "-video cirrus" when starting qemu-kvm. But newer versions do care. And this probably only applies to you if you are running from bash/terminal with remote kvm images. What you need to do is remove the "-video" part and just add -vnc :5 eg. this would fix the error: qemu-system-x86_64 -enable-kvm -boot order=cd,once=dc -m 1024 -drive........
  • Centos 7 tftpd will not work with selinux enabled


    In Centos 7 tftpd will not work with selinux. Clients will not be able to connect and this is all you'll see in the log (then nothing more): Sep 18 14:39:15 localhost xinetd[4327]: START: tftp pid=4331 from=192.168.1.65 On the client/computer side you will see this: TFTP. PXE-M0F: Exiting Intel Boot Agent Basically the client is being instantly connected and bloc........
  • Debian Ubuntu Mint Howto Create Bridge (br0)


    Having a network bridge allows you to bridge traffic under multiple devices so they can talk natively without using any special routing, iptables/firewall or other trickery. To create your bridge you need the bridge-utils package for brctl and if you want to do things like bridge VMs that run on a tap device you will need the uml-utilities which provides "tunctl". 1.) Install the utilities to make our bridge sudo apt-get i........
  • Debian Ubuntu and Linux Mint Broken Kernel After Date - New Extra Module Naming Convention


    I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules. One other weird thing is that sometimes........
  • python 3 pip cannot install mysql module


    python3 testserver.com-car-scraping.py html.txt Traceback (most recent call last): File "testserver.com-car-scraping.py", line 5, in import mysql.connector ImportError: No module named 'mysql' For some reason it won't install properly even though I have the mysql client on this machine installed too. Solution: You need the mys........
  • QEMU-KVM won't boot Windows 2016 or 2019 server on an Intel Core i3


    CPU:Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz MOBO: Manufacturer: ASUSTeK COMPUTER INC. Product Name: P8H61-M LX3 PLUS R2.0 qemu-kvm-0.12.1.2-2.506.el6_10.1.x86_64 This is weird but the only OS I've found this machine doesn't work with is Windows 2019 Server. Ihave no idea, when 2008, 2012 work f........
  • Bind / named not responding to queries solution


    By default bind will not respond to outside queries for security reasons. In most distributions you will find the default in /etc/named.conf looks like this at the top under options: listen-on port 53 { 127.0.0.1; }; listen-on-v6 port 53 { ::1; }; directory "/var/named";........
  • Linux Mint How To Set Desktop Background Image From Bash Prompt CLI


    The way of doing it in mint is different than gnome and ubuntu. gsettings set org.mate.background picture-filename /path/to/file.jpg *If you try to use the gnome way it will NOT work with Linux Mint: gsettings set org.gnome.desktop.background picture-uri /some/pic.jpg........
  • Ubuntu/Gnome/Mint/Centos How To Take a partial screenshot


    By default printscreen or alt print screen will get the whole desktop or the application in focus, respectively. But what if you want to select a portion of the screen? gnome-screenshot: ksnapshot compiz This is a nicely integrated solution sudo apt-get install compizconfig-s........
  • Cisco IP Phone How To Reset To Factory Settings Instructions CP 9971, 8800, 8900, 8845, 8851, 8841, 8831, 7961, 7960, 7945, 7942, 7941, 7940.


    This would be crucial especially if the phone is hardened, not being able to reset or change settings could prevent a phone registering in a new environment or even when migrating from office to office. This applies even if you are trying to migrate the phone to another platform such as Asterisk/FreePBX etc... This guide applies to nearly all of the Cisco IP phones that you would use in CME or CUCM from several years ago including models: 9900, 9971, 8800, 8900, 8845, 8851, 8841........
  • Cisco Unified Communications Manager / CUCM IP 8.6,10,12 Install Error Solution


    Install Errors on Version 12: This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5 on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error. *Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install. What really causes this even though you successfully install........
  • Ubuntu Debian Mint Linux SSHD OpenSSH Server Not Starting After Reboot Solution


    If you get error messages like this it is usually because /var/run/sshd does not exist. root@userbox:/# service sshd status ● ssh.service - OpenBSD Secure Shell server Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enab Active: failed (Result: start-limit-hit) since Wed 2019-04-10 02:24:44 EDT; 1 Process: 511 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=255)........
  • Cisco Unified Communications Manager 12 Install Errors on Proxmox/KVM


    The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs. qemu-kvm command: /usr/libexec/qemu-kvm -version QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard ........
  • Windows 7, 8, 10, Windows Server 2008, 2012, 2016, 2019 How To AC97 Audio Drivers and Other Unsigned Drivers


    Oops did you get this error trying to install an oldschool driver and think it is hopeless in a new version of Windows? First of all it is almost never a program compatibility issue: ........
  • Linux qemu-kvm How To Enable Soundcard in Guestl


    Pass QEMU this flag: -soundhw ac97 Or you could use (for a Ensoniq soundcard): -soundhw es1370 However on some machines I get this error: pulseaudio: pa_simple_new for capture failed pulseaudio: Reason: Connection terminated pulseaudio: pa_simple_new for capture failed pulseaudio: Reason: Connection terminated audio: Failed to create voice `ac9........
  • qemu-kvm qemu-system Image format was not specified for '/mnt/space/cucm12.img' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'ra


    WARNING: Image format was not specified for '/mnt/space/cucm12.img' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'raw' format explicitly to remove the restrictions. #you should manually specify the format q........
  • Linux Mint XWindows Ubuntu MATE or Cinnamon How To Restart The GUI / Graphics / Session if it freezes without losing current windows or programs


    Uh oh, so you're working on some super l33t code or other stuff that is super important and Linux Mint's MATE or Cinnamon window manager freezes. This means maybe you can move your mouse but you can't click anything, you can't Alt + Tab to another program but everything appears to be working other than that. The first thing you would do is Ctrl + Alt + F1 (or whatever virtual terminal you want) and get into the Linux bash prompt (the black screen where things really happen :))........
  • Linux bash prompt why does it not show username@host and the current directory?


    Perhaps you've just seen this in the bash prompt: -bash-4.1# Instead of the expected user@hostname# It is probably because you are missing .bash_profile or .bashrc in your home directory Check for yourself: ls -al ~/|grep -E ".bash_profile|.bashrc" -rw-r--r--. 1 root root&nbs........
  • How To Use Letsencrypt SSL/TLS Encryption to Create Certificates without installing on the target machine


    For some reason, perhaps you don't want to run a daemon or let Letsencrypt have access to your production server. There is a way to use it like a normal CSR/CA setup in manual mode. ./letsencrypt-auto certonly --manual -d realtechtalk.com - www.realtechtalk.com   Eventually you will get prompted to create a certain path and file with certain data: Create a file containing just this data: Casdfasfadsfsad........
  • Cisco Router Setup Guide and Tutorial Howto With Commands and Examples


    In most of the Cisco router IOS I find the ports like ge0/0 ge0/1 and ge0/2 or whatever your ports are down. They will not even give you a link light. So one of the first tasks should be getting the port you are working with up. In my case the first goal is often connectivity with the LAN and WAN. LAN = your local area network (eg. in the office/home ) WAN= your ISP/public internet (eg. fiber/cable/dsl/ethernet).........
  • Cisco Switch Reset To Factory Defaults


    This works on the 2000 and 3000 series generally. *The easy way is to just hold the mode button for 10+ seconds. The full/proper way is below: 1.) Either power on the unit and hold the "mode" button or hold the "mode" button until you see the below: 00:04:08: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram 00:04:08: %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configur........
  • How To Boot Cisco CUCM UCSInstall 8.6, 10, 11 and 12 on KVM/Proxmox


    The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported. Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........
  • VBOX VirtualBox How To Import Raw .img Disk File


    What you need to do if you have taken a dd or real raw image dump of a hard disk: VBoxManage convertdd windows2019-eval-template.img windows2019.vdi --format VDI The .img is the raw dd dump and the .vdi is the output file. --format VDIspecifies to output to .vdi format If you are in a pinch you can always use qemu-kvm binary and manually specify the .img as your disk and i........
  • LUKS Hard Drive Encryption on Linux Mint Ubuntu Debian etc how to mount encrypted hard drive


    The key thing here is to know the actual partition that is encrypted. Often in Linux Mint's installer that ends up being partition 5 or /dev/sda5 sudo cryptsetup luksOpen /dev/sda5 anynamehere You will then be prompted for your irrecoverable passphrase: Enter passphrase for /dev/sda5: If all goes well it won't say anything further. If it says ""No key available with this passphr........
  • Centos 7 Reallocate logical volume space to another


    Do you hate how Centos 7 defaults to allocating most of your valuable space to /home even though it is a production server? Here is a quick guide on how to take back that space live, while online (of course make sure you have backups just in case something goes wrong!): First we will reduce our home dir by 100G: lvreduce -L -100G /dev/mapper/centos-home WARNING: Reducing active and open logical volume to ........
  • iptables linux firewall recommended rules for public computing


    Whether you are at work, at the coffee shop or on the public internet here are some basic but effective rules for iptables that lock things down (eg. no one can SMB or SSH to you or really anything): # Generated by iptables-save v1.4.21 on Fri Dec 14 14:00:08 2018 *nat :PREROUTING ACCEPT [160:19844] :INPUT ACCEPT [4:357] :OUTPUT ACCEPT [2955:182236] :POSTROUTING ACCEPT [2955:182236] COMMIT # Completed on Fri Dec 14........
  • Linux How To Create A RamDisk


    size = the amount of RAM (m for megabytes) /mnt/ram = the mount location of the ram disk (change to the path you want it mounted to) mount -t tmpfs -o size=4096m tmpfs /mnt/ram/ Example test in an old server: You can see that when reading if you don't specify bs1=M the read speeds are several times slower (eg. 450MB/s vs 2.1GB/s) mount -t tmpfs -o size=4096m tmpfs /mnt/ram/^C root@testserver:~# dd........
  • Proxmox Breaks Storage/LVM Backing If Killing QEMU-IMG


    I tried to stop a qemu-img copy or clone and it broke everything. It was fine to "stop" it from the GUI but a process still persisted so I killed the relevant qemu-img and the kernel went crazy. It also may not have helped that I tried to lvremove a different volume (an unused disk). But either way it breaks LVM (you cannot even run lvdisplay) so a reboot is necessary. Jan 17 06:45:21 testserver kernel: [ 5680.439337] systemd-udevd D 0&nbs........
  • bind named error solutions named[2169]: error (no valid DS) resolving / error (broken trust chain) resolving / : error (no valid RRSIG) resolving 'com/DS/IN':


    Below are the common errors you'll get with named AKA bind if your time is incorrect. The simplest solution is to install and run ntpd to correct your system's time (install ntpd if it is not installed) systemctl start ntpd systemctl enable ntpd Dec 20 13:36:16 hostingbox named[2169]: error (no valid DS) resolving 'develop.waxrain.com/A/IN': 14.215.150.17#53........
  • iptables how to log ALL dropped incoming packets


    A lot of people just have a -j DROP to drop all unwanted traffic or traffic not explicitly allowed but there is a better solution if you want real and proper logging: Here is another example of more advanced iptables rules. Take an example iptables rules file -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p icmp -j ACCEPT........
  • How To Edit Linux Based NM Network Manager Connection Settings Without GUI


    Just find the relevant file in /etc/NetworkManager/system-connections sudo vi /etc/NetworkManager/system-connections/Wired connection 1 [802-3-ethernet] duplex=full mac-address=00:00:00:FE:FE:FE [connection] id=Wired connection 1 type=802-3-ethernet timestamp=1532403341 [ipv6] method=ignore [ipv4] method=manual........
  • mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument solution


    mdadm --manage /dev/md125 -a /dev/sdb4 mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument Dec 19 01:23:48 storageboxtest kernel: [ 2328.854491] md: sdb4 does not have a valid v1.2 superblock, not importing! Dec 19 01:23:48 storageboxtest kernel: [ 2328.854499] md: md_import_device returned -22 #zero the superblock and try again! mdadm --zero-superblock /dev/sdb4 mdadm --ma........
  • Linux named / bind how to dump, view and clear the cache!


    Do you hate it when your ISPhas old cached records because of a high TTLon the DNS record of the relevant domain? In plain English this means you often can't connect to a site or service because your ISP's DNS servers haven't gotten word of the new IP address (probably because they haven't checked). There are also some that are notorious for ignoring TTL and not updating records for days! But if you are lucky and smart enough to have your own Linux based DNS se........
  • Why SMART is not smart at all and doesn't properly predict disk errors that cause a kernel panic or crash


    Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated. It has caused a kernel panic and system crash repeatedly as we can see from the logs. But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector. Any time I have had anything but 0 for that attribute it........
  • Python and BeautifulSoup4's BS4's Decompose Method To Remove Unwanted Inner Tags


    < a href="/Products/MX72244"> < span class="c-shca-icon-item__body-name-brand"> ADATA < / span> &nbs........
  • httpd AH00534: httpd: Configuration error: No MPM loaded. solution


    httpd AH00534: httpd: Configuration error: No MPM loaded. Simple Solution (assuming you don't have this line in httpd.conf aleady: echo "Include conf.modules.d/*.conf" >> /etc/httpd/conf/httpd.conf ........
  • How Does Cisco CUCM (Cisco Unified Communication Manager) Work?


    Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments. Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........
  • bash script how to to check LAN computers for open ports


    In this case it just searches for port 80 it is fairly handy if you have some sort of appliance or something else you aren't sure of the IPof Of course change the port 80 port to whatever port(s) you want. for ip in `arp -n|arp -n|tail -n +2|head -n -1 |grep -v incomplete|awk '{print $1}'`; do echo "checking $ip:80" nc -w 1 -z $ip 80 if [ "$?" == 0 ]; then echo "**Port 8........
  • MySQL Using mytop Debug Source of High IO and Slow Performance


    mytop is one of my favorite tools and it is fairly simple aside from a few caveats and issues that persist to this day. To install it on Centos: yum -y install centos Configure ~/.mytop vi ~/.mytop user=root host=localhost db=test #port=3306 socket=/var/lib/mysql/mysql.sock header=1 color=1 Try runni........
  • systemd management using systemctl and journalctl to check systemd logs


    systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system. The key commands or arguments you will use with systemctl are the following: Unit Commands: list-units [PATTERN...] List loaded units &nbs........
  • css how to format code in the code tag


    code { background: #f4f4f4; border: 1px solid #ddd; border-left: 3px solid #f36d33; color: #666; page-break-inside: avoid; font-family: monospace; font-size: 15px; line-height: 1.6; margin-bottom: 1.6em; max-width: 100%; &nb........
  • css br with extra blank line


    The problem I was having is that a css template Iwas using was causing br's to have an empty line in between which is very undesirable especially when displaying code. br { display:none; margin: 0px; height: 0px; } Using CSS code like above will fix it. You technically shouldn't need the margin or height either.........
  • Linux Permissions and Groups Real Usecase for Group Access


    Ihave a directory structure which the primary user needs full access on but wanted a user to access only a specific directory within the main directory (so they could write in there only and nowhere else). Here's what Idid: [root@compevo8001 dllnow]# ls -alh drwxrwxr-x 2 someuser software 4.0K Oct 19 2017 ExpireYMD-2017-11-20 drwxrwxr-x 2 someuser software 4.0K Nov 19 2017 ExpireYMD-20........
  • Centos 7 - Convert Minimal to Graphical GUI GNOME or KDE Desktop


    Did you just install the minimal version by accident or want to install the GUI? No need to reinstall just tell yum to do the work for you! You could actually have both installed and choose one as your preference on demand (although many people prefer GNOME's simplicity). Step 1.) Install Gnome and/or KDE. To install the GNOME Desktop on Centos 7: yum -y groups install "GNOME Desktop" To........
  • genisoimage errors with long filenames and deep directory structures


    You'll have to violate the iso9660 standards but it is necessary if you want to preserve your filesystem and filenames and shouldn't be an issue as long as you are using a modern OS like Linux. genisoimage -o Backup-Myfiles.iso -r -J -joliet-long /some/path/ You will get errors like below (even enabling joliet-long didn't help) genisoimage: Error: /some/filename.pdf have the same Joliet name Joliet tree sort failed. The -joliet-lo........
  • How to download gajim 0.16.9 XMPP/Jabber client so you can use OMEMO encryption


    #Linux Mint 18.2 how to install gajim .16.9 so you can use OMEMO encryption: sudo apt-get install python-axolotl python-nbxmpp wget https://gajim.org/downloads/0.16/gajim-0.16.9.tar.gz tar -zxvf gajim-0.16.9.tar.gz cd gajim-0.16.9 ./autogen.sh ;make;sudo make install #if you get this error you need to get a newer python-nbxmpp from here: gajim Gajim needs python-nbxmpp >= 0.6.1 to run. Quiting...........
  • HP DL385 G7 Linux BIOS Update Flash


    wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe --2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85 Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1525561 (1.5........
  • hwloc-nox set CPU affinity in Linux


    sudo apt-get install hwloc-nox Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: hwloc-nox 0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded. Need to get 151 kB of archives. After this operation, 453 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubunt........
  • Proxmox understanding the directory structure and why an NFS datastore appears to be missing files/isos


    Proxmox at the root of your storage creates and "images"and "templates/iso" folder for VM images and iso's respectively. It ignores files in any other location.........
  • Proxmox error uploading an iso solution


    Error 0 occurred while receiving the document root@vh1:/var/tmp# wget http://mirror.compevo.com/proxmox/proxmox-ve_5.2-1.iso --2018-08-30 16:27:37-- http://mirror.compevo.com/proxmox/proxmox-ve_5.2-1.iso Resolving mirror.compevo.com (mirror.compevo.com)... 103.25.61.44 Connecting to mirror.compevo.com (mirror.compevo.com)|103.25.61.44|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 641517568 (612M) [application/o........
  • zenity popup messages, windows, dialogs, error messages calendars and more howto on Gnome Linux including Ubuntu, Linux Mint, Centos and more


    zenity is a nice utility as part of the gnome window manager that allows you to script from bash and retrieve the input from the user. It could also be helpful in just notifying a user when they login with a popup window. I'll give an overview of what's available with zenity: Application Options: --calendar Display calendar dialog --entry Display tex........
  • Debian/Ubuntu/Mint Linux How To Set VLAN in /etc/network/interfaces


    You can find many ways to specify the VLANin your network configuration but Ifind this is the simplest and quickest. In this case we are talking about a bridged adapter "vmbr0" but it works even if you just had a normal non-bridged interface. The key here is that in vmbr0 you'll notice there is no IP address. We just specify "manual". Below it is a similar stanza for "vmbr0.58" in this case 58 represents the VLAN (change........
  • PHP Displaying Blank Page on Apache


    Almost always the reason will be that the php.so file is missing but also that php.conf is misconfigured. In the problem machine it is actually PHP7 installed so if you reference PHP5 of course things wil be broken! Take for example here: cat /etc/httpd/conf.d/php.conf # # PHP is an HTML-embedded scripting language which attempts to make it # easy for developers to write dynamica........
  • prosody xmpp server "Failed in all attempts to connect to proxy.eu.jabber.org"


    Aug 13 13:46:33 s2sout2d45040 info Failed in all attempts to connect to proxy.eu.jabber.org Aug 13 13:46:33 s2sout2d45040 info Sending error replies for 1 queued stanzas because of failed outgoing connection to proxy.eu.jabber.org No clue why it tries to use a proxy not explicitly specified. This could be because the proxy specified for the domain fails when someone is trying to se........
  • VMWare ESXi 6.7 SSH/PowerShell CLI Commands


    [root@localhost:~] BootModuleConfig.sh echo host-ind nfcd........
  • VMWare Vsphere VCSA Graphical Install Creates json


    yes it does create its own json ============================================ cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json 2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1 --> ........
  • gmail.com address failing in Postfix


    Aug 10 01:11:54 mailserver postfix/smtp[6180]: 020AE17C2BD1: to=, relay=none, delay=0.29, delays=0.28/0/0/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=gmail.con type=A: Host not found) A user complained that their e-mails weren't being delivered but they actually made a small typo and used gmail.con so it wasn't working as expected of course........
  • Debian Mint Ubuntu compiling xmr-stak


    sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3 sudo apt-get install libcurl4-gnutls-dev git clone https://github.com/wolf9466/cpuminer-multi sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev git clone https://github.com/fireice-uk/xmr-stak-cpu.git make install cd bin chmod +x xmr-stak-cpu ./xmr-stak -O xmr........
  • Linux How To Rename Files


    To remove all spaces from all files in the current directory linux rename remove spaces rename "s/ //g" * how to replace part of the text with another (it is almost like using sed): rename s/"Screenshot at 2019-04-22 "/"AC97-Windows-InstallSolution"/g * The first part "Screenshot at 2019-04-22" is what we're looking for The........
  • Ethereum Client Errors


    INFO [07-19|12:11:51] Imported new block receipts count=590 elapsed=8.440s bytes=74117699 number=4870906 hash=6bc60b…934753 ignored=0 INFO [07-19|12:11:57] Imported new state entries count=499 elapsed=9.963ms processed=71076 pending=1526 retry=2&nbs........
  • Linux Mint 18 Screen Goes Dark or Black After Screensaver or even when using the Desktop Solution


    You can search for this bug and it seems like it may be related to ecryptfs and is many years old. The symptoms are that you return to the computer and the screensaver was active or the screen was asleep/black and it doesn't seem to come back. But you check by SSH the computer is running fine and are frustrated you'll lose your running programs and have to reboot. There is a simple solution: Ctrl + Alt + F1 Ctrl +Alt + F8 Ba........
  • iptables guide and examples and howto


    iptables allow port 22 example Of course change --dport and -s to suit your needs #allow certain IP to access port 22 iptables -A INPUT -p tcp -m tcp --dport 22 -s 192.168.1.0/24 -j ACCEPT # block others iptables -A INPUT -p tcp --dport 22 -j DROP........
  • How to qemu-kvm enable bridged networking in Debian Ubuntu Linux Mint on KVM containers


    I've read a few guides about this but they didn't work for me. sudo apt-get install bridge-utils #don't think the above is enough it won't work still even though you have by default an /etc/qemu-ifup that handles it if you have the right tools and setup sudo qemu-system-x86_64 -net tap -net nic -enable-kvm -cpu host,vmx=on ~/VirtualBox VMs/vsphere-vcenter/vsphere-vcenter.vdi W: /etc/qemu-ifup: no bridge for guest interface foun........
  • VirtualBox Nested Virtual Machine Containers with KVM Not Working no SVM or VMX module in the guest


    I can't get vmx cpu extensions to show up in Virtualbox guests despite enabling nested paging and enable vmx in virtualbox guest but this doesn't help that you check VT-X or the AMD Virtualization SVM it enables it for the guest to use BUT does not pass it through. This means if you check cat /proc/cpuinfo in the guest you will see the CPUdoesn't support virtualization. It looks like VirtualBox still hasn't implemented this! But there is good news I&n........
  • VSphere InternalServerError - Error When Adding Permissions


    InternalServerError (com.vmware.vapi.std.errors.internal_server_error) => { messages = [LocalizableMessage (com.vmware.vapi.std.localizable_message) => { id = vapi.bindings.method.impl.unexpected, defaultMessage = Provider method implementation threw unexpected exception: com.vmware.vapi.std.errors.InternalServerError, args = [com.vmware.vapi.std.errors.InternalServerError] }], data = } I was getting the........
  • NFS Share Won't Mount Solution - mount: wrong fs type, bad option, bad superblock on 10.10.2.20:/tmp/nfsmount


    nfs mount failed: mount 10.10.2.20:/tmp/nfsmount /mnt/nfs/ mount: wrong fs type, bad option, bad superblock on 10.10.2.20:/tmp/nfsmount, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount. helper program)  ........
  • OVF Tool: Error: Task failed on server: This host does not support Intel VT-x. VMWare VCenter install On ESXi ERror


    Intel VT-X is enabled in Virtualbox but it doesn't seem to pass through the needed vmx extension despite the following variables on the host confirming it is enabled: cat /sys/module/kvm_intel/parameters/nested Y cat /sys/module/kvm_intel/parameters/ept Y OVF Tool: Disk progress: 99% OVF Tool: Transfer Completed OVF Tool: Powering on VM: Embedded-vCenter-Server-Appliance- OVF Tool: Task p........
  • Install NFS (Network File System) On Debian Linux Ubuntu Mint Howto


    sudo apt-get install nfs-kernel-server #oops there are no exports so it won't startsudo /etc/init.d/nfs-kernel-server start* Not starting NFS kernel daemon: no exports. #we will use the /tmp/nfstestshare directory for our NFS share mkdir /tmp/nfstestshare #add it to /etc/exports (basically what NFS checks to determine what to make an NFS share) /tmp/nfstestshare 192.168.1.5(rw,sync,........
  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
  • Hard Drive Serial Number Examples


    The reason for this article is because a lot of us don't physically see our hard drives they are often remote in a datacenter etc and the actual serial number we see in SMART is not enough to check for some manufacturers. A good example is our first one the Toshiba === START OF INFORMATION SECTION === Device Model: TOSHIBA DT01ACA200 Serial Number: 33FMDW4AS........
  • Cannot create gradle for conversations


    The main issue is it looks like Java is not configured to accept the invalid ssl cert that is coming from the download location. Exception in thread "main" java.lang.RuntimeException: javax.net.ssl.SSLException: java.security.ProviderException: java.security.InvalidKeyException: EC parameters error export ANDROID_HOME=/home/user/Downloads/tools/ Conversations-master$ ./gradlew Downloading https://services.gradle.org/distributions/grad........
  • mail command line examples of how to send an email using Linux / Unix and the Bash Shell or Scripting


    A simple way that may work for a lot of people who just need basic output for their scripts or daemons to announce an action is this: echo "body or message" | mail -s "realtechtalk.com" user@domain.com If you want to send a text file as the body just do this instead: mail -s "realtechtalk.com" user@domain.com < /tmp/sometxtfile.txt These are some ve........
  • OpenVPN cannot ping remote IP routing loop issue after connecting


    Sometimes if you have a very basic configuration OpenVPN on the client side for some reason sends all traffic to the OpenVPN server IP through the tun0 which is of course impossible and creates a block or routing loop. This is because you need to use your normal ISP/LANgateway to hit the OpenVPN server if it is remote/offsite as is usually the case. So if you are connected to the OpenVPN through say a tun0 device and your routing is set to connect to the OpenVPN&nbs........
  • Linux Mint Black Screen after boot no graphics solution


    This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help. Here is the short end of the stick that fixed it: sudo apt-get install mdm mate-desktop-environment Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........
  • Intel NUC J3455 Linux Kernel freeze slowness 4.4.98 errors


    It looks like this has something to do with APIC but I am not sure. I have similar CPUs with a different MB and BIOS that work fine on the same type of kernel. A lot of time the issue is because of the C-step setting in the BIOS. The same thing happened on the 2.6 kernel with Centos 6 but this is a homebrew 4.4 kernel soI am not sure why it is happening when even Centos 7 (3.2) kernel works OK. Solution - It comes down to the BIOS set........
  • named[1525]: error (broken trust chain) resolving 'min-api.cryptocompare.com/A/IN': 173.245.58.78#53 solution


    So you restarted your router/dhcpd server or for some other reason you wonder why DHCP is not working on any of your clients?You go and check that named is in fact running fine. But then you check /var/log/messages and see this error for everything hostname: named[1525]: error (broken trust chain) resolving 'min-api.cryptocompare.com/A/IN': 173.245.58.78#53 I've only ever seen this when the time on the server was off. It........
  • Linux Ubuntu Mint Debian cannot play xvid,x264,mp4 or any videos codec issue - xplayer Could not initialize supporting library.


    In xplayer Iget the following error "Could not initialize supporting library.". It actually looks more like a gstreamer issue. For those wondering what the default video player is called it is "xvid" and not "totem" anymore like previous versions. Basically it looks like some codecs are missing when I uninstalled another program it uninstalled other programs and codecs that it shouldn't have. I've tried installing all the gstre........
  • IcedTea Java Web Viewer Config Utility How To Enter


    In at least Ubuntu and Mint there is nothing intuitive about configuring Java. Execute it to get to it: itweb-settings You'll be able to configure different options and variables. You can also check under Security as some of those settings could prevent applets from starting or prompting to........
  • Debian Linux Mint Ubuntu Disable Automatic apt-get update


    sudo chmod 000 /etc/cron.daily/apt-compat This is the easiest way to disable the cron without anything more invasive like deleting the file. After that you won't have anymore apt-get's starting. This can be critical for systems without much extra RAMthat is not in use. I've seen systems that have swapped and crashed over apt-get.........
  • SMF Forums / Simple Machines Forums Not Displaying Images Theme or Styles Properly using 127.0.0.1


    This is one thing that has me wondering about SMF. It is apparently a known issue but in the latest version and new install nothing looked right because it was using http://127.0.0.1 to find everything! How on earth would it ever do this or think it is normal? Excerpt of crazy html code it produces that causes the issue: ........
  • solution mysqldump: Got error: 1044: Access denied for user 'user'@'localhost' to database 'thedb' when using LOCK TABLES


    It is simple the user just needs to be given the "LOCK TABLES" privilege. As root run this command: GRANT LOCK TABLES ON yourdatabase.* TO yourmysqluser@localhost;........
  • MySQL How To Grant Access To ALL Databases For Export and Backup Purposes


    GRANT SELECT, LOCK TABLES ON *.* TO yourmysqluser@localhost; All you need to do a full MySQL dump on all databases is the SELECT and LOCK TABLES privileges. This way you don't have to use the mysql root user. Data could be compromised this way but at least no harm from manipulation, changes or deletion are possible by locking down the privileges to the minimum for a full MySQL dump and backup.........
  • Apache htaccess Custom ErrorDocument not working properly for root home page 403 Error Issue and Solution


    So I have a domain "testdomain.com". Inside test domain.com's root is the following .htaccess: Options +FollowSymLinks -Indexes ErrorDocument 403 /launch/index.html Order Deny,Allow Deny From All Allow From 192.168.1.2 When you visit anything other than root things work fine. Eg. if you visit http://testdomain.com/somedirfile.html It will show the right error in /launch/........
  • Installing SSL Certificate with Chain Intermediary CA File


    Some of the cheaper or newer SSL suppliers will require this to work properly (otherwise you may be prompted that the cert is invalid when it's not the case but it will certainly scare off your users!). In the Apache vhost conf for the domain here is what you add: SSLCACertificateFile /path/to/your/cafile.pem Here is a full example of an SSL Vhost config in Apache using a CA Certificate file ........
  • Centos How To Update to Glibc 2.14 Plus


    Centos 6 requires GLIBC 2.12 however a lot of new programs you would want to compile may need a newer glibc. You can't remove the old glibc since the whole OS is based on it but you can install the updated glibc alongside it and do an export pointing to your updated GLIBC. mkdir ~/glibc_install; cd ~/glibc_install wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz........
  • htaccess apache how deny/allow to block or allow by IP address


    order deny,allow Deny From All Allow From 8.8.8.8 A simple and quick way to improve security by only allowing specific IPs to your web application. In this case the above allows only the IP 8.8.8.8 to access things and everything else is denied.........
  • GCC 5 on Centos 6 - How To Install


    Install requirements: yum -y install gmp-devel mpfr-devel libmpc-devel glibc-devel glibc-devel.i686 zip unzip jar Download, untar, configure, compile and install GCC http://mirrors.kernel.org/gnu/gcc/gcc-5.5.0/gcc-5.5.0.tar.gz tar -zxvf gcc-5.5.0.tar.gz cd gcc-5.5.0 ./configure make make install Now you need to cleanup th........
  • How To Create Apache htpasswd file


    This just simply outputs what you need a username and password that can be used to authenticate from .htaccess htpasswd -nb user password user:Gnb6uE9Lp4gt2 If you want to write it straight to a file htpasswd -cb /tmp/somefile.pw user password How To Use This In .htaccess AuthUserFile /tmp/somefile.pw AuthName GetLost!! AuthType B........
  • Linux how to view video card make and exact model


    Normally lspci will show you just like this and would suggest they are exactly the same card: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) 1c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) lspci -vnn is the answer As we can see one is a Gigabyte and the other is an MSI card. Wha........
  • How to Update Linux /usr/share/misc/pci.ids


    This works with lspci and if it's outdated may not give you the exact manufacturer and device model. For example take these 3 different RX 580's: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) 1b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) 1d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) You ca........
  • pcimodules and lspci not working alternative solution


    pcimodules no longer works it produces nothing probably because the format of /sys/bus/pci is different. lspci -k doesn't work on older lspci versions. pciutils can be compiled but it won't work if you have an old system and compile on a newer glibc. iteriate through /sys/bus/pci/devices/*/modalias cat /sys/bus/pci/devices/*/modalias pci:v00008086d00001237sv00000000sd00000000bc06sc00i00 pci:v00008086d00007000sv0000000........
  • h264 DVR security camera footage cannot be played


    This is not just a Linux issue but a general issue most software or hardware players cannot play the resulting exported/backed up format of .h264 from DVR security camera footage for some silly reason. There is a simple solution in Linux using ffmpeg fortunately. Convert the .h264 file into mp4 ffmpeg -i yourfile.h264 -codec copy video.mp4 play dvr .h264 file........
  • yum how to install old obsolete packages


    This is important as unfortunately Centos may designate a package obsolete and the replacement breaks everything (eg. you have a config file and the new replacement is not at all compatible with it and it breaks your application). This is where disabling obsoletes comes into play, it can be done from yum but it doesn't work at the time I find. yum --setopt=obsoletes=0 install someapp However Ifind it still installs the new app and not the one you ask for........
  • ffmpeg vidstab to stabilize video


    I'm having trouble making it work on very shaky video the result seems kind of warped/blurry/fish eye like and not as good as some other examples I've seen: ffmpeg -i MVI_1285.MOV -vf vidstabdetect=shakiness=10:accuracy=15 -f null MVI_1285.trf ffmpeg -i MVI_1285.MOV -vf vidstabtransform=smoothing=30:input="transforms.trf" MVI_1285.MOV.mp4 I've played around with the shakiness, accuracy etc.. but not the smoothing part.........
  • [Wed Sep 20 15:34:44 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Wed Sep 20 15:34:44 2017] [error] Init: Unable to read server certificate from file /www/ssl-certs/server.crt [Wed Sep 20 15:34:44 2017] [error] SSL Library Err


    [Wed Sep 20 15:34:44 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Wed Sep 20 15:34:44 2017] [error] Init: Unable to read server certificate from file /www/ssl-certs/server.crt [Wed Sep 20 15:34:44 2017] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag [Wed Sep 20 15:34:44 2017] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error........
  • linux how to answer yes to copy


    Have you have a command ask a question such as cp or move? You can do this: echo y|cp * /tmp/othercopy However it may still fail if your bashrc aliases have the "-i" flag see this post here.........
  • ERROR 2006 (HY000) at line 567: MySQL server has gone away


    mysqldump or mysql query of a larger file/table ERROR 2006 (HY000) at line 567: MySQL server has gone away Add this to /etc/my.cnf max_allowed_packet=64M service mysqld restart........
  • vbulletin 4.2.5 after upgrading from 3.6 white screen fatal php errors


    The code may lead you to believe you have an incompatible template but if you are not trying to use an old template currently that is not the issue. I actually deleted all 3.x style templates to make sure. What the issue is, is old plugins that are not compatible but Vbulletin does not seem to account for this except that you'll see a fatal PHPerror. You should disable all plugins and then enable one by one until you find the one that is causing the issue. &........
  • l2tp ipsec VPN Error Sep 12 18:16:25 vps pluto[7299]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 192.5.6.2 port 20640, complainant 192.5.6.2: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated


    Sep 12 18:16:25 vps pluto[7299]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 192.5.6.2 port 20640, complainant 192.5.6.2: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Some say changing the "leftprotoport=17/%any" will fix this but I have not found this to be the case. Essentially it means at least one end is blocking the ipsec packets. Sometimes the %any allows an alt........
  • ecryptfs how to mount or recover from a backup


    The easiest way to recover or mount an off-line ecryptfs directory is the built-in command from ecryptfs sudo ecryptfs-recover-private It will find your wrapped passphrase and ask for your password and mount it in tmp. Much easier especially when your current active OS is using ecryptfs too. This a fantastic tool when going through old backups.........
  • Linux Mint/Ubuntu/Debian apt how to downgrade a package


    First of all check to see which version if any you have available for a downgrade: apt-cache showpkg packagename Downgrade/Install old package: apt-get install package=version Example apt-cache showpkg caja Package: caja Versions: 1.10.3-1+rafaela (/var/lib/apt/lists/packages.linuxmint.com_dists_rafaela_import_binary-amd64_Packages) (/var/........
  • Intel NUC Lower Power Green Computing Boxes Review/Comparison of J3160 and J3455 Models


    Intel NUC J3455 vs Vorke V1 J3160 Both are excellent units but the J3160 is nicer if you require even lower power usage (6W vs the Intel 10W). The price is attractive on the Vorke V1 as well. It's been said that the Intel J3455 NUC has a buggy BIOS and some other issues that require attention. The Intel J3455 is still nice because it has 2 RAMslots but it does get hotter due to lack of fan. The Vorke V1 runs cooler, uses less power an........
  • How to backup entire computer Linux Mint Ubuntu with tar


    sudo tar --ignore-failed-read -czvf mycomputer-backup.tar.gz --exclude=/home/otheruser/* --exclude=/proc/* --exclude=/sys/* / Note the --exclude clauses and modify/add according to your needs........
  • tar how to ignore failed reads and not exit


    This is an important feature a failed read can genuinely occur if a temporary file has been removed or if you try backing up a sysetm file in /proc /sys (which you shouldn't really anyway). The way to fix this is the following switch: --ignore-failed-read Example: sudo tar --ignore-failed-read -czvf mycomputer-backup.tar.gz --exclude=/home/otheruser/* --exclude=/proc/* --e........
  • kdenlive titles/text renders as white screen when using .sh script


    When using the .sh script the rendering doesn't work after an upgrade of related packages to kdenlive. kdenlive (kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1)) with affine or composite transitions was fine but is now broken during the time of transition it is just a white screen. The previous version was fine: kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1 But now I can't find it or install it:........
  • [1035724.274610] [drm:intel_pipe_update_end [i915_bpo]] *ERROR* Atomic update failure on pipe A (start=62076478 end=62076479) time 102 us, min 894, max 899, scanline start 893, end 900 W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1.bin


    [1035724.274610] [drm:intel_pipe_update_end [i915_bpo]] *ERROR* Atomic update failure on pipe A (start=62076478 end=62076479) time 102 us, min 894, max 899, scanline start 893, end 900 W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1.bin for module i915_bpo I've been getting those errors on a J3455 NUC box with the latest kernel on Linux Mint 18.2. When updating the initramfs I also got the error about the firmware........
  • ffmpeg how to watermark and concatenate in one command


    If you were in my boat you were frustrated that you had to double encode, eg. one separate encode for watermark and a separate from concat and it's not easy to figure out this with ffmpeg on your own. However it is a nice way to save time! ffmpeg -i file1.mp4 -i file2.mp4 -i file3.mp4 -i watermark.png -filter_complex "[0:v]setpts=PTS-STARTPTS[v0]; [1:v]setpts=PTS-STARTPTS[v1]; [2:v]setpts=PTS-STARTPTS[v2]; [v0][0:a][v1][1:a][v2][2:a]concat=n=3:v=1:a=1[v][aout]; [v][3:........
  • /usr/bin/ld: cannot find -lboost_system-mt-s /usr/bin/ld: cannot find -lboost_filesystem-mt-s /usr/bin/ld: cannot find -lboost_program_options-mt-s /usr/bin/ld: cannot find -lboost_thread-mt-s collect2: error: ld returned 1 exit status make: *** [cag


    cagecoin linux compile: sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev Solution: sed -i s/"BOOST_LIB_SUFFIX=-mt-s"/"#BOOST_LIB_SU........
  • Wine uninstalled broken on Linux Mint


    Solution: Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt sudo aptitude install wine The following NEW packages will be installed: ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6 wine1.6-amd64{a} wine1.6-i386:i386{a} The following packages will be REMOVED:........
  • ffmpeg trouble concatenating similar but different files


    When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right. Solution for me: My example uses 3 videos in total so "n=3" and a=1 to include audio. ffmpeg -threads 12 -i file1.mp4 -........
  • ffmpeg Unable to Use Hardware Encoding with Nvidia 3.40 Driver and GT210 card


    I believe from what I've read that this card's driver doesn't support the features after trying all known troubleshooting methods. ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload -c:v hevc_nvenc -profile main -preset slow -rc vbr_hq -c:a copy uservideoRendered.mp4-test ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload........
  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd ffmpeg-3.3.2/ ./configure --disable-yasm install prefix /usr/local source path ........
  • Migrate Centos 7 from Single HDD to mdadm RAID 10 array:


    Done on Centos 7.3 very important as clearly based on older guides it was a lot easier and more simpler! Hint do not use grub2-install! If you have trouble booting after this check this CentOS mdadm RAID booting/fixing guide. One huge caveat if you are an oldschool user or sysadmin who has avoided UEFIbooting The nor........
  • USB 3.0 External HDD Enclosure Seagate UAS problems - [sdd] tag#1 CDB: Write(16) 8a 00 00 00 00 01 70 04 08 68 00 00 00 08 00 00


    This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether. Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........
  • Centos 7 Cudaminer Nvidia setup guide


    I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us yum install automake curl openssl-devel libcurl-devel gcc gcc-c++ yum -y install kernel-devel-`uname -r` yum -y install unzip #the........
  • USB 3.0 PCI x1 Card Review VIA VL805 on Linux Review and Experience


    This is a VIA made VL805 USB 3.0 Chipset with 4-ports and MOLEX powered. First of all this unit was cheap at about only 9 USD with fast shipping. My biggest concern was if this was a quality unit and would it really give you full USB 3.0 speeds (some people reported with similar cards that for some weird r........
  • Why won't my Linux Mint boot after I manually installed a new kernel?


    Why won't my Linux Mint boot after I manually installed a new kernel? eg. apt-get install linux-image-newerone Do this dpkg -l|grep linux-image|grep extra ii linux-image-extra-3.16.0-38-generic 3.16.0-38.52~14.04.1&nb........
  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........
  • imagemagick pdf convert error solution - **** Warning: can't process font stream, loading font by the name. Can't find CMap Identity-UTF16-H building a CIDDecoding resource. Warning: falling back to Identity ordering **** Error reading a conte


    **** Warning: can't process font stream, loading font by the name. Can't find CMap Identity-UTF16-H building a CIDDecoding resource. Warning: falling back to Identity ordering **** Error reading a content stream. The page may be incomplete. **** File did not complete the page properly and may be damaged. **** This file had errors that were repaired or ignored. ****........
  • USB Device/MP3 Player not working properly and can't browse the device filesystem? Check the cable twice and again!


    Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues. Take for example the error messages from Linux Mint: [804829.895414] usb 1-1: USB disconnect, device number 11 [806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........
  • Centos/Linux Bash Script Warning when exiting/logging out of bash/shell/terminal for scripts running in the background


    This is mainly the case on Centos but applies to other distros and situations. If you are running programs in the background with the &, at least in Centos it is usually not honored and if you quit or are disconnected the backgrounded programs will be sent sighup and be shut down. The simplest way around this instead of using & is to start any programs or commands with "nohup" Eg. nohup yourscript.sh........
  • Nvidia Linux Mint/Ubuntu screentearing horizontal line solution


    Finally after ages I found the solution which is on many pages on the net but not obvious and should have been standard or more common info! Instant Solution: Type this into the terminal (unfortunately the driver config menu doesn't have the option as itis hidden): nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceCompositionPipeline = On }" Make permanent Cli........
  • Openshot 2.2 is very unstable always crashing in Linux Mint 18.1!


    Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user: Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4 Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........
  • Transaction Check Error: file /usr/lib64/php/modules/fileinfo.so conflicts between attempted installs of php-pecl-fileinfo-1.0.4-2.el6.rf.x86_64 and php-common-5.3.3-49.el6.x86_64 solution


    Transaction Check Error: file /usr/lib64/php/modules/fileinfo.so conflicts between attempted installs of php-pecl-fileinfo-1.0.4-2.el6.rf.x86_64 and php-common-5.3.3-49.el6.x86_64 solution you can't install php-pecl-fileinfo it seems to be incompatble with the php5.3 being installed: yum --exclude=php-pecl-fileinfo --skip-broken --disablerepo=epel install php-*........
  • Linux Mint Install Netboot PXE Guide Howto


    *Update so this doesn't work it must be something to do with the path of nfs or something else but the installer fails with "Installer crashed" at the end whereas with the CD/USB it works. This assumes you've already installed and configured a separate PXE/DHCP server somewhere else and your /tftpboot directory is setup. This is for Linux Mint 18.1 but generally applies to most versions although you may have tro change things like "casper"........
  • xdebug easiest howto get going


    Just make sure you have php-xdebug installed and edit your php.ini: [xdebug] xdebug.profiler_enable = 0 xdebug.profiler_enable_trigger = 1 xdebug.profiler_output_dir = "/tmp/xdebug/" xdebug.output_name = "cachegrind.out.%t-%s" Also make and set permissions on /tmp/xdebug: mkdir /tmp/xdebug chmod 777 /tmp/xdeb........
  • Text Editors - Top Linux Ubuntu/Debian/Mint Options


    1.) gedit/pluma both very good the only thing I wish is that there was an autosave for unsaved documents! The only other competitor which is similar but I prefer less is kwrite (although I think kwrite may have proper autosave) pluma seems to be a renamed gedit yet gedit is still installable on Linux Mint) ........
  • use ffmpeg to watermark videos if mencoder/bmovl fail


    If you have this problem: http://realtechtalk.com/mencoder_bmovl_error_vf_bmovl_Unknown_command_Ignoring_-1860-articles Then ffmpeg is for you. Go here if you are using Linux Mint and cannot find or install it to use an external PPA........
  • mencoder bmovl error vf_bmovl: Unknown command: ''. Ignoring.


    Based on this tutorial: http://www.linuxjournal.com/content/overlay-images-video-using-mplayer-and-mencoder mencoder -oac pcm -ovc raw -vf bmovl=0:0:tfifo -o $output $file vf_bmovl: Unknown command: ''. Ignoring. ........
  • Linux Mint missing ffmpeg solution to install from Ubuntu PPA


    This is very annoying that ffmpeg is missing from Linux Mint! They have ffmpeg2theora which is a totally different codec and does not work as ffmpeg does at all (it is basically totally different). However on Linux Mint 17 I was able to use a Ubuntu PPA and sucessfully install ffmpeg! https://launchpad.net/~mc3man/+archive/ubuntu/trusty-media Adding this PPA to your system........
  • phpBB3 slow and internal dummy connection


    Using Apache 2.2 and PHP5.6 PHPBB3 is very slow to respond. Actually for some reason it takes so long to even register a log entry in access_log as in several seconds or a few minutes later it shows up in Apache. All other vhosts and Apache access stops working and freezes until the request to access PHPBB3 slowly completes. It seems to randomly be slow if you stop using it whether for posting or reading the forums. I've migrated to different machines including........
  • check if Apache uses worker MPM or prefork MPM


    apachectl -l Compiled in modules: core.c prefork.c http_core.c mod_so.c It is "prefork.c" so in httpd.conf these settings are what you would use (if you use worker.c it won't have any impact): StartServers 2 MinSpareServers 5 MaxSpareServers&nb........
  • text to speech for Linux


    espeak - is horrible and sounds very old and robotic echo "hello there"|espeak #don't know how to use mbrola and plugins cicero jovie just seems to be a graphical interface to espeak There is also sbreader/sapi Google's Text To Speech Works Quite Well #!/bin/bash say() { local IFS=+;/usr/bin/mplayer -ao alsa -really-quiet -noconsolec........
  • Avocent DSR8020 KVM/IP - Network Connect Error - Solution


    This error is commonly due to Java security or TLS settings but there is a second issue with forwarded ports that also causes it. 1. Java Security/TLS Settings issue: This article has the solution to change them all in Linux automatically 2. Port Forwarding Issue if your Avocent DSR is behind NAT/private IP........
  • Linux Ubuntu Mint how to view RAW image files .arw?


    Ijust use "ufraw" and it does the trick perfectly. Now Iwish I could figure out how to batch convert them into .jpg with ImageMagick (it seems support for .raw is not guaranteed or it has to be compiled in). apt-get install ufraw........
  • What happens when you unplug 1 or more devices from an mdadm RAID array to simulate a failure in Linux Ubuntu/Centos/Debian?


    In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below. mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore. [45817.162728] ata4: exception........
  • Linux how to reformat html file code solution


    The solution is simply "tidy"/Tidy-HTML. It will take your poorly formatted HTML code (and I mean files that span just a few lines that are unreadable) and fix it up. Note the command below does everything in place. *Make sure you take a backup of all .html files* It also seems to break html5 code/templates so beware. tidy -im yourfile.html An automated way in bash:........
  • ENOM TRANSFER passwords do not match - solution


    The "passwords do not match" implies or makes it appear that your auth code is wrong but actually you have to click "View additional settings" and then see there are 2 password fields to manage the domain once it is transferred (the password is typed twice for confirmation). Simply fill out a password twice or remove the first password fields contents and all will be well.........
  • mdadm: CREATE group disk not found Incrementally started RAID arrays. Incrementally starting RAID arrays...


    mdadm won't boot in Ubuntu/Mint/Debian anymore. You just get the following in a loop: mdadm: CREATE group disk not found Incrementally started RAID arrays. Incrementally starting RAID arrays... mdadm: CREATE group disk not found Incrementally started RAID arrays. Incrementally starting RAID arrays... mdadm: CREATE group disk not found Incrementally started RAID arrays. Incrementally starting RAID arrays... mdadm: CREATE group dis........
  • root/home directory has ownership changed to the wrong user/owner mysteriously


    Ifigured out what caused this but don't have the solution just yet. Iwould deploy a certain script from a .tar.gz to some servers and found that /root was always owned by user and group "1000.1000". This corresonded to the user who made the .tar.gz. For some reason when extract normally with "tar -zxvf file.tar.gz" it impacts the parent directories ownership. There must be some recursion going on or possibly the .tar.gz but I haven't f........
  • mdadm and lvm how to completely disable and remove vg/pv/lv


    In short the solution is just to use vgremove for the actual /dev/mapper device: vgremove /dev/mapper/backups-backuplv box mnt # mdadm --manage /dev/md8 --stop mdadm: Cannot get exclusive access to /dev/md8:Perhaps a running process, mounted filesystem or active volume group? box mnt # lv lvchange lvconvert lvcreate l........
  • mdadm frozen and doesn't realize array is dead/missing failed due to unplugged drives


    This was a surprising bug but I unplugged all drives for an array md127. At first it was just 1 drive and mdadm seemed to notice this. I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it. This created problems trying to unmount it or even to stop this array with mdadm freezing. As for how to fix it I can only think of making sure you are not in a mounted path of........
  • DRBD Split-brain solution


    Uh oh [17925926.174277] block drbd0: Handshake successful: Agreed network protocol version 96 [17925926.174325] block drbd0: conn( WFConnection -> WFReportParams ) [17925926.174342] block drbd0: Starting asender thread (from drbd0_receiver [1682]) [17925926.174432] block drbd0: data-integrity-alg: [17925926.174581] block drbd0: drbd_sync_handshake: [17925926.174586] block drbd0: self 2AAE66AF9252D6DB:2815BF........
  • Setting Up System for First Use... Please Wait... - WHMCS Installer


    This happens sometimes that it takes a fair amount of time for some WHMCS installations but it usually ends up completing eventually.........
  • ERROR 2013 (HY000): Lost connection to MySQL server during query


    The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files. UPDATE user SET password=password("newpass") WHERE user='root'; flush privileges; ERROR 2013 (HY000): Lost connection to MySQL server durin........
  • MySQLD Server shutdown remotely unexpectedly


    170110 5:35:23 [Note] /usr/libexec/mysqld: Normal shutdown 170110 5:35:23 [Note] Event Scheduler: Purging the queue. 0 events 170110 5:35:23 InnoDB: Starting shutdown... 170110 5:35:24 InnoDB: Shutdown completed; log sequence number 0 12765401 170110 5:35:24 [Note] /usr/libexec/mysqld: Shutdown complete 170110 05:35:24 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended........
  • fdisk wq causes hung process


    I created a new partition table on a newly plugged in device and it caused fdisk to hang (even force kill does not work). It also may be a bad drive or some other issue because fdisk -l hangs after the first 2 HDDs (totaly of 8 HDDs on this system): [1232879.903596] INFO: task fdisk:27176 blocked for more than 120 seconds. [1232879.903607] Tainted: P&nbs........
  • remove gpt partition linux


    sudo fdisk /dev/sdh WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util fdisk doesn't support GPT. Use GNU Parted. WARNING: The size of this disk is 8.0 TB (8001563221504 bytes). DOS partition table format can not be used on drives for volumes larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID partition table format (GPT). The device presents a l........
  • iptables how to forward localhost port to remote public IP


    iptables -t nat -A OUTPUT -m addrtype --src-type LOCAL --dst-type LOCAL -p tcp --dport 3306 -j DNAT --to-destination ip.ip.ip.ip iptables -t nat -A POSTROUTING -m addrtype --src-type LOCAL --dst-type UNICAST -j MASQUERADE sysctl -w net.ipv4.conf.all.route_localnet=1 Make sure you substitute "ip.ip.ip.ip" for your real public IP and also the "--dport 3306" for the port you want to forward. Finally run the sysctl command and........
  • OpenVZ Solution CPT ERR: c02fa000,73 :CPT: lock fd is closed incorrectly: 1 and vps-net_add ERROR: Unable to add route ip route add 192.168.5.2 dev venet0


    The only solution after trying many suggestions was to simply restart the "vz" service (definitely not preferable). Even doing an ifdown and ifup for venet0 did not help. ifup venet0 Bringing up interface venet0: Configuring interface venet0: net.ipv4.conf.venet0.send_redirects = 0 RTNETLINK answers: Network is down Some errors from log: CPT ERR: d2dc60........
  • forcedeth MCP55 Nforce3600 Nvidia Network NIC Card Not working in Linux at 1gigabit speeds


    Now many people report this card simply not working in various Linux distros and kernels. My issue is different, it always works at 100mbit (eg. plugged into a 100mbit switch) but no matter what 1000M/gigabit switch I would try, it would never work. The link would be up (the lights were on) and the OS detected the link as being up as well but it wouldn't work at all and could not pass data in or out (not even a ack/ping). There is one simple solution and command........
  • How to Normalize and Increase the Volume on M4A files in Linux


    M4A is a weird format, so you have to be creative here is a quick copy of what I did. Basically you need to convert to .wav to make use of them and thenI converted the resulting .wav into an mp3 (nice small file size and basically universally playable): ======= sudo apt-get install mpg321 mp3gain faad normalize lame faad "Voice 002 (copy).m4a" faad "Voice 002 (copy).m4a"........
  • grubby fatal error: unable to find a suitable template solution Centos


    vzkernel-2.6.32-042stab116.2.x86_64.rpm&n........
  • Linux Mint 17 How to Enable File Sharing Option in File Manager


    I still cannot understand how this would not be enabled by default and I struggled to find the reason why with manually installing samba etc.. wondering why the option for sharing was not in the menu. On Linux Mint "MATE" the package is called "caja-share" and on Cinnamon it is called "nemo-share" so edit the below command as necessary: *Also note that the "samba" package is necessary as it is not inst........
  • The connection was reset The connection to the server was reset while the page was loading.


    In Firefox I cannot connect to any website, proxy is disabled and outside network access is confirmed, no system or manual proxy was set on this Linux Mint/Ubuntu system. Normally this can be caused by proxy or DNS problems and the weird thing is that traceroute and ping to other IPs worked fine but even connecting to sites by IP was not working. The connection was reset The connection to the server was reset while the page was loading.........
  • Openvz kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3)


    kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3) Varying opinions are out there but in general it seems like the most common culprit is a lack of privvmpages, with a modern OpenVZ system the best way is to set privvmpages as equal to what your RAM is and this has resolved the messages on another system. If it's truly a TCP issue you can adjust the following parameters:........
  • Ubuntu/Debian OpenVZ Template Problems No Networking and SSH not starting


    It all comes down to a bug essentially where you are running an older kernel that doesn't support the newer Debian templates. The solution is to update your OpenVZ kernel. Here are some symptoms of the problem/lack of kernel support: Ubuntu Template 12.04 requires a manual network start: service networking start sshd will not start: /usr/sbin/sshd PRNG is not seeded mknod /dev/random c 1 8........
  • Centos and obfsproxy install errors


    pip install obfsproxy /usr/lib/python2.6/site-packages/pip/_vendor/requests/packages/urllib3/util/ssl_.py:90: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning. InsecurePlatformWarning You are using pip version 7.1.0, however version 8.1.1 i........
  • There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:


    There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.7.9 (default, Apr 21 2016, 16:51:58) [GCC 4.4.7 20120313........
  • Mint/Ubuntu/Debian error twisted/test/raiser.c:4:20: fatal error: Python.h: No such file or directory #include Python.h


    Simple solution install python-dev sudo apt-get install python-dev libyaml-dev libpam-dev........
  • Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so:


    Stopping httpd: [FAILED] Starting httpd: httpd: Syntax error on line 73 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared obje........
  • Apache SSL Reverse Proxy Very Slow Solution


    This is a simple fix but not a simple problem and it still doesn't make sense to me. But in a nutshell if your target proxy server works fast when accessing directly over SSL then this may be your issue. It seems SSL does not play nicely when the target proxy destination/host has a riduculously long key (such as 8192 bits long). Now this is normally not a problem, in fact the target server could be accessed with hardly any delay directly despite such a long key.........
  • Nvidia Linux Card not working due to LSI 9200/SAS2008 IRQ conflict


    At first my BIOS said the card may not work right because there is no more option ROM space. I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly. But it still cannot initialize the card properly(does not work): [ 33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........
  • A start job is running for /etc/rc.local Compatibility


    According to this and my own experience it is the case that you have started something running in the foreground or a server that does not terminate with a normal rc.d script. The server will reboot once you kill whatever command or process that is.........
  • Linux Mint/Ubuntu/Debian Window Controls Missing Solution


    If Linux Mint 17 or other has no window buttons/controls you can do the following from terminal: marco --replace& Sometimes it can be fixed if you go to your themes/appearance and choose a new one but in the case like mine where Compiz is installed but not running/working then that fix will not work and will require the marco command above. What if you can't type in a terminal Window? If you close........
  • Errors were found while checking the disk drive for /.


    Iwill start by saying I think I know what caused this boot-time error on Linux Mint but should also apply to Debian and Ubuntu. I changed my BIOS time to several hours in the past to match the current time, but this caused Linux to think there were incorrect filesystem times. The problem is that it seems when you hit this I am not sure what is happening, it doesn't seem to be doing fsck and hangs without prompting the user. What I have found is that........
  • Debian Linux Ubuntu Mint connect to pptp from terminal bash shell


    apt-get install pptp-linux echo "yourvpnusername * yourpasspass *" >> /etc/ppp/chap-secrets vi /etc/ppp/peers/provpnaccounts.com enter (ignore the lines): ============ pty "pptp server.provpnaccounts.com --nolaunchpppd" name testuser #remotename PPTP require-mppe-128 file /etc/ppp/options.pptp ==========........
  • vi Debian Linux Ubuntu Mint arrow key problem linux ssh bash shell terminal


    Debian/Ubuntu vi keyboard problem, up and down arrows do not work and instead make an A (Up), B (Down), C (Right) or D(Left). The working solution (you could also add the set nocompatible to /etc/vim/vimrc to make it system wide-will not be applied until reboot I believe): echo "set nocompatible" > ~/.vimr........
  • Vbox Cannot register the hard disk


    Cannot register the hard disk '/media/Debian8.vdi' {d01efabc-aacf-4614-b29c} because a hard disk '/home/VirtualBox VMs/Debian/Debian8.vdi' with UUID {d01efabc-aacf-4614-b29} already exists. This is what happens if you move the VDI to another location. The easiest way is to delete/remove the machine from VBOX and then reimport it from the new location.........
  • Avocent 8020 KVM Java Icedtea Viewer


    This command in Debian/Ubuntu/Mint will get everything need installed for most Java based KVM viewers: sudo apt install icedtea-netx The following additional packages will be installed: ca-certificates-java icedtea-netx-common openjdk-8-jre openjdk-8-jre-headless It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post.........
  • Centos installing grub problems suspect gpt problem


    grub> root (hd0,0) root (hd0,0) Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) But if you do: root (hd1,0) setup (hd1) it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical). Checking if "/boot/grub/........
  • Virtualbox Error


    In plain English this happens after you upgrade VBOX and it rebuilds kernel modules based on a newer kernel than you are running (eg. you upgraded your kernel but haven't booted into it). It is too bad there is not a standard work around that would allow it to realize this and keep old kernel modules and use them if it detects your current kernel is older than the most recently build modules. =============== RTR3InitEx failed with rc=-1912 (rc=-1912) The........
  • How to scp transfer a file in Linux with spaces


    Say you have a path like this "/some/path/here with spaces/". If you try to transfer it you will get a message along the lines of: scp -rp 192.168.0.12:"/some/path/here space/" . scp: /some/path/here: No such file or directory scp: space: No such file or directory You can escape each space but what a pain that is especially if you have multiple spaces in the path. The simplest way is to use the follow........
  • Windows showing wrong drive size after resizing the VPS/image or cloning howto fix


    How to Increase The Disk and Partition Size in Windows 2022,2019,11,10,8,7 etc.. Server 1, Enter the command prompt Start -> cmd 2. Start diskpart diskpart 3. Find the drive that has the wrong size list volume 4. Select the volume (in this example we use volume 2) select volume 2 5. Extend the volume........
  • How to manually save bash history


    This is useful in the case you are not properly logged in via an OpenVZ session or even a normal SSH session that you fear may go down(if the connection is broken the history is not saved). Save your bash_history like this: history -w ~/.bash_history You can always change the above to another file eg /tm........
  • Centos 6 how to guide convert LVM non-RAID into mdadm 1/10 RAID array live without reinstalling


    Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access. So in this case you add a second physical or disk or already ha........
  • Virtualbox errors on Ubuntu/Debian/Mint


    The solution was to reinstall the vbox dkms package and do a manual modprobe of the modules it makes. I never sorted out the unable to start due to the USB issue, I did have the guest additions installed but the only way to boot was to change the pointing device from USB to PS2 and then to disable the USB controller (if your pointing device is set as USB, disabling USB will not work because it will re-enable by default when it sees your pointing device is USB, this is w........
  • Installing zoneminder on Ubuntu/Debian Linux Howto


    sudo apt-get install zoneminder [sudo] password for one: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libuser-perl python-evince kdebase-apps kwrite unixodbc libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp python-mediaprof........
  • Centos/obfsproxy errors


    I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar: yum -y install python-pip python-devel No package python-pip available. #install the EPEL repo python-pip install obfsproxy python-pip install obfsproxy -bash: python-pip: command not found pip install obfsproxy &........
  • OpenVZ Install Guide Again / Quick Setup


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl #enable ip_forward sed -i s/'net.ipv4.ip_forward = 0'/'net.ipv4.ip_forward = 1'/g /etc/sysctl.conf #all interfaces should not send redirects echo "net.ipv4.conf.default.send_redirects = 1" >> /etc/sysctl.conf echo "net.ipv4.co........
  • mdadm create raid10 array with only 2 drives


    mdadm --create /dev/md1 --level 10 --raid-devices=2 /dev/sdb2 /dev/sdc2 --layout=f2 --metadata=0.90 Note that layout=f2 or layout=n2 is very important as without it you'll get a complaint like this: mdadm --create /dev/md0 --level 10 --raid-devices /dev/sdb1 /dev/sdc1 missing missing mdadm: invalid number of raid devices: /dev/sdb1 It is basically more like a prop........
  • Weird Ubuntu Issues with NVIDIA driver/Compiz


    1.) My screensaver would take a long time to disable after hitting a key. 2.) Usually errors like below will follow. 3.) Compiz sometimes uses 100% or high CPU 4.) My window controls will disable (eg. the minimize, maximize and close buttons). It seems like Compiz or appearance/effects disable themselves. Re-enabling Desktop Effects under Appearance temporarily fixes it. 5.) high load in general from things like "Migration" pr........
  • Dell CS24-NV7 lspci dmidecode info


    0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2) 0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3) 0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3) 0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1) 0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2) 0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 0000:00:05.1 I........
  • Debian sources.list examples


    Based on this from Debian The 'distribution' can be either the release code name / alias (wheezy, jessie, stretch, sid) or the release class (........
  • Linux CLI command to rip audio CD and encode convert to MP3s


    This command rips the audio tracks to .wav files *I recommend making a new directory with the name of the audio disc first and executing everything from within that directory below. cdparanoia -B Use the lame mp3 encoder to encode each one with this script: *Note that this will encode any other files ending in "cdda.wav" for track in `ls *cdda.wav`; do lame -b 192 $track; done........
  • bash string substitution


    so in this case we have files named like this: track01.cdda.wav.mp3 track06.cdda.wav.mp3 track11.cdda.wav.mp3 track02.cdda.wav.mp3 track07.cdda.wav.mp3 track12.cdda.wav.mp3 track03.cdda.wav.mp3 track08.cdda.wav.mp3 track13.cdda.wav.mp3 track04.cdda.wav.mp3 track09.cdda.wav.mp3 track05.cdda.wav.mp3 track10.cdda.wav.mp3 but we want to rename them so they are like "05.........
  • dir2slideshow Centos rpm requirements


    yum -y install dvdauthor ffmpeg mjpegtools sox bc rpm -ivh dvd-slideshow-0.8.4-2.noarch.rpm Preparing... ########################################### [100%] 1:dvd-slideshow ########################################### [100%] /usr/bin/dir2slideshow: line 553: bc: command not f........
  • No package fuse-encfs available. yum


    It looks like newer versions of Centos no longer have encfs so you have to compile it, only it does not work and fails so those wanting encfs should probably use any other OS which supports it better.........
  • bash script how to do wildcard string comparisons or matching


    This is a feature that works very well in bash and is easy to do: *Remember you need the double brackets for this specific test even though a normal if would not require them variable="hi there" if [[ "$variable" = hi* ]]; then echo "yes it contains hi" fi........
  • bash script linux how to do a wildcard string comparison


    if [[ "$templatesource" == *windows* ]]; then partition=/dev/sda2 fi The * before and after * windows will match this "Ihavelotsofwindowshere" Of we could have used "windows*" and anything that starts with "windows" will be matched etc...........
  • kvm how to add secondary cdrom drive


    This is useful if you are installing Windows and need virtio but of course Windows needs the virtio driver which is on a second iso. This is the line of code you would add to your kvm startup script and then you get this iso as second cdrom you can browse to for your Windows install of virtio driver's or whatever other use you need it for. -drive file=/kvmtemplates/virtio-win-0.1-94.iso,media=cdrom........
  • Dell CS24SC Server Info


    Dell CS24SC Info 0000:00:00.0 Host bridge: Intel Corporation 5100 Chipset Memory Controller Hub (rev 90) 0000:00:02.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x8 Port 2-3 (rev 90) 0000:00:03.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 3 (rev 90) 0000:00:04.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x16 Port 4-7 (rev 90) 0000:00:05.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 5 (rev 90)........
  • Dell CS10-F1D Server Info lspci Linux specs


    0000:00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1) 0000:00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) 0000:00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) 0000:00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1) 0000:00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4........
  • VPN Account Buyers Guide and General Info


    What matters most about VPNproviders in 2024? We are highly suspicious of VERYLARGE VPN providers that have LOW PRICES and HUGE DISCOUNTS. The suspicion is that for those who know what costs are involved to purchase thousands of IPs and servers are not small. At the prices that many of the big mainstream providers offer, it is likely unprofitable or barely profitable. Then, how are those companies making money or is that even the goal? There use........
  • KVM: unknown exit, hardware reason 0x80000021 kvm_run returned -22 solution


    If the below is happening on KVM (a very weird and scary looking error) it's probably because of Windows. This has happened countless times to me where the bootsector on Windows 7/2008 becomes corrupted easily (even by a crash or shutdown). KVM: unknown exit, hardware reason 0x80000021 kvm_run returned -22 rax 0000000000000010 rbx 0000000000000080 rcx 0000000000000000 rdx 0000000000000080 rsi 000000000025db2a rdi 000000000007db2a rsp 0000000000000200 rbp........
  • PHP Issues with Joomla Strict Standards: Non-static method JLoader::import() should not be called statically


    This is basically caused by upgrading PHPto a new version like 5.4 when you had 5.2 before and an old version of Joomla. The only solution is to upgrade Joomla or downgrade PHP, both of which can be a pain. Strict Standards: Non-static method JLoader::import() should not be called statically in /home/userdir/public_html/libraries/joomla/import.php on line 29 Strict Standards: Non-static method JLoader::register() should not be ca........
  • NS_ERROR_FAILURE (0x80004005) The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.


    The solution is to run '/etc/init.d/vboxdrv setup' and sometimes happens when upgrading VBox and the kernel modules don't get upgraded with it. Sometimes the above doesn't work until you reboot because sometimes other unknown processes (even the file manager possibly) may be locking the old module from being unloaded. Failed to open a session for the virtual machine XP. The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.........
  • Directadmin compile error solution cc: Internal error: Killed (program cc1)


    cc: Internal error: Killed (program cc1) Please submit a full bug report. See for instructions. make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1 make: *** Waiting for unfinished jobs.... Stopping crond: ........
  • bash shellshock how to manually patch when there is no update for Centos/Debian/Ubuntu/Fedora


    wget http://ftp.gnu.org/gnu/bash/bash-4.3.tar.gz tar xzvf bash-4.3.tar.gz cd bash-4.3/ wget --no-directories --level 1 --recursive http://ftp.gnu.org/gnu/bash/bash-4.3-patches/ for patch in `ls bash43-*|grep -v .sig$`; do echo applying "$patch" patch -p0 < $patch done ./configure;make;make install #it will install to /usr/bin/bash but if your bash is somewhere else you need to overwrite the old one.........
  • firefox android text size inconsistent large and small text size solution


    This is very annoying and also hard for web developers who want to see how things look on Android. You may be fooled into thinking you have an unclosed bracket or incompatible code but this is the "text inflation feature" which I feel should be disabled by default. It works so inconsitently that one block of text will appear small while the other will be huge and is quite annoying. The solution is simple Settings ->Display and &q........
  • /usr/libexec/mysqld: The table 'session' is full solution


    First of all if you're getting this error it is a result of extreme database activity. If you aren't expecting it or it doesn't make sense to you 99% of the time this is a database driven script being exploited (some common examples I see often are things like phpBB being hit by dozens, hundreds or thousands of bots making constant DB write requests). The easiest way to identify this is to restart MySQL and then run the third party tool "mtop" and you'll see all........
  • Openvz 2014-08-12T19:05:55-0400 vzctl : CT 391801 : Unable to start init, probably incorrect template 2014-08-12T19:05:55-0400 vzctl : CT 391801 : Container start failed


    2014-08-12T19:05:55-0400 vzctl : CT 391801 : Unable to start init, probably incorrect template 2014-08-12T19:05:55-0400 vzctl : CT 391801 : Container start failed This was caused by trying to run a 64-bit template on a 32-bit kernel hostnode which is obviously impossible. The solution is to use a 32-bit template or upgrade the hostnode to 64-bit.........
  • .htaccess mod_rewrite preserve access to custom query string solution


    I struggled with this for awhile because sometimes you have rewritten URLs that you want to pass a query string but most of the info and examples do not support this. Take a typical example like this: RewriteRule ^(.*)-(.*)-(.*) /?module=$3&id=$2 You need to add the QSA flag to make it work like below: RewriteRule ^(.*)-(.*)-(.*) /?module=$3&id=$2 [QSA] The QSA preserves the original query string but also appends it wit........
  • 2CO/2Checkout how to create recurring payment subscription button dynamically


    It was hard to find this as I find most online payment processors don't just put the basic information in plain view. Remember to set your sid (your seller id). The below can easily be turned into a scripted PHP template to integrate into your own custom or existing payment solution. http://help.2checkout.com/articles/How_to/How-to-Sell-Recurring-Products-with-2Checkout/........
  • CPanel Link to all of the command line options


    CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting.  I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts. So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........
  • drbd 8.3 hard drive failure recovery example


    drbd 8.3 hard drive failure recovery drbdadm attach r0 DRBD module version: 8.3.10 userland version: 8.3.8 you should upgrade your drbd tools! 0: Failure: (119) No valid meta-data signature found. ==> Use 'drbdadm create-md res' to initialize meta-data area. ........
  • The Best NoSQL Solution


    To first start off, there are many misconceptions about NoSQL and especially its strengths and weaknesses. Even the popular NoSQL solution MongoDB is fraught with issues that no one seems to be concerned about aside from a few but there are serious issues with database integrity and verified writes. MySQL was considered dangerous or incomplete at one point without having the transactional safety features of Oracle for example. However the NoSQLimplementations seem........
  • drbd won't create device if previous partition is on it Command 'drbdmeta 0 v08 /dev/md160 internal create-md' terminated with exit code 40


    This is what fixed it: [root@box13 ~]# dd if=/dev/zero of=/dev/md160 bs=512 count=500 Basically you need to wipe out more than just the 512 byte partition table so 512 bytes * 500 is more than enough to make DRBD happy and think the partition is now empty. The reason this happens is because it gets confused when there is a previous partition with data on the device you are using. root@box13 ~]# d........
  • heartbeat compile errors with rpmbuild


    c1: warnings being treated as errors stonith_signal.h:34: error: 'stonith_signal_set_simple_handler' defined but not used gmake[3]: *** [apcmaster.lo] Error 1 gmake[3]: Leaving directory `/root/rpmbuild/BUILD/heartbeat-1.2.4/lib/plugins/stonith' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/root/rpmbuild/BUILD/heartbeat-1.2.4/lib/plugins' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/root/rpmbuild/BUI........
  • LVM Tutorial how to create a Physical Volume (PV), Volume Group (vg), and a Logical Volume (LV) within it


    # first we need a physical volume which we use the pvcreate tool to create # I create mine on /dev/sdb3 pvcreate /dev/sdb3 dev_is_mpath: failed to get device for 8:19 Physical volume "/dev/sdb3" successfully created # pvdisplay shows the newly created volume pvdisplay "/dev/sdb3" is a new physical volume of "1.35 TiB" --- NEW Physical volume --- PV N........
  • Howto Convert Xen Image to KVM


    #count=10000 makes an image of 10000MB make sure your image is at least the same as your existing dd if=/dev/zero of=yourimage.img bs=1M count=10000 # losetup -fv newimage.raw # fdisk -cu /dev/loop0 # kpartx -a /dev/loop0 # dd if= of=/dev/mapper/loop0p1 # e2fsck -f /dev/mapper/loop0p1 # resize2fs /dev/mapper/loop0p1 # a lot of guides tell you to edit /etc/fst........
  • OpenVZ mismatched kernel and dev when compiling.


    ./configure ./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory Error: kernel version not found. Please make sure your kernel is configured. dr-xr-xr-x. 4 root root 4096 Feb 21 06:13 .. lrwxrwxrwx 1 root root 45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25 drwxr-xr-x 2 root root 4096 Feb 12 20........
  • mencoder howto trim split edit time of mp4 from Samsung Note


    mencoder -fps 30 -ss 00:00:38 -oac lavc -ovc copy 152408.mp4 -o soundedit.mp4 The -ss flag means to start at 38 seconds (so the first 38 seconds of video will be removed).........
  • OpenVZ Quick Install Copy & Paste for Centos 6


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl After that just reboot and you may also have to enable ip_forward in /etc/sysctl.conf........
  • Howto edit/rotate Samsung/Android Videos in mencoder solution


    Movie-Aspect is undefined - no prescaling applied. videocodec: libavcodec (720x1280 fourcc=34504d46 [FMP4]) [mpeg4 @ 0x2c91c00] timebase not supported by mpeg 4 standard Could not open codec. FATAL: Cannot initialize video driver. That is the error I would get, I thought it was a codec error something else. By fluke Isaw something about ffmpeg where someone recommended manually telling it to the "fps" and it worked.........
  • /usr/local/cpanel/bin/apache_conf_distiller 100% cpu


    On some CPanel installs we see complaints of "/usr/local/cpanel/bin/apache_conf_distiller" causing 100% cpu usage without any solution. Killing the process causes it to spawn again, actually it seems it tends to spawn multiple processes itself. Restarting CPanel itself is a temporary but not permanent solution.........
  • cPanel Find/Set Main DNS Servers for Template Howto


    Go to: "Server Configuration" -> Basic cPanel & WHM Setup Scroll to: "Nameservers" (at the bottom) From there you can set the names of the nameserver and their IPs. It's very weird and confusing that nothing under IP Functions/DNS has or links to this.........
  • kvm centos cannot compile error


    ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install gcc make ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install compat-gcc-* ./configure Error: Could not find alsa Make sure to have the alsa libs and headers installed. yum -y install alsa-lib-devel ./configure........
  • bash heredoc howto example


    template=$(cat ........
  • Migrate Linux Mint OS from one drive to another


    mount -o bind /proc /sda2/proc mount -o bind /dev/ /sda2/dev mount -o bind /sys /sda2/sys chroot /sda2 mint / # mount -o bind /proc /sda2/proc mint / # mount -o bind /dev/ /sda2/dev mint / # mount -o bind /sys /sda2/sys mint / # chroot /sda2 mint / # cd ~ mint ~ # ls Desktop mint ~ # cd / mint / # ls bin Desktop dev-temp home&nb........
  • Openvz OOM Centos Issue Memory Config Settings Solution


    Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux even setting privvmpages to a specific setting DOES not affect "free -m" in containers. This is probably a kernel issue 23:36:29 up 159 days, 7:12, 4 users, load average: 0.42, 0.44, 0.33 [root@box13 ~]# free -m total&n........
  • GIMP Create .ico file for website favicon.ico howto in Linux


    GIMP File - Save As Microsoft Windows Icon (*.ico)........
  • rpmforge Centos 6 how to install


    rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt i686: rpm -ivh http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.i686.rpm x64: rpm -ivh http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm ........
  • Dell SAS 6/ir Cards are just LSi 1068E cards


    02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) 03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) Basically these cards are a stripped-down version of Dell Perc 6/i only they (SAS 6/ir) support JBOD. The DellPerc 6/i are basically useless because it doesn't have JBOD support and requires software or BIOS commands to add or remove........
  • bash date command to convert unix epoch timestamp


    date -d @timestampgoeshere +%c It's very handy and simple as shown above.........
  • CPanel suhosin install failed


    /scripts/phpextensionmgr install PHPSuHosin Updating md5sum list Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)... Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........
  • Unixbench Testing


    The first is a dual CPU AMD Opteron 2373EE (4 cores x 2) and I think it did bad because it has some old 250GB SATAs which can only do about 65MB/s max sequential reads. I think it should have blown away the second (AMD X4 640 Quad Core). [root@fs12home unixbench-4.1.0-wht-2]# ./Run make all make[1]: Entering directory `/root/unixbench-4.1.0-wht-2' Checking distribution of files ./pgms exists ./src exists........
  • Linux create htaccess file with username and password


    htpasswd -b -c filename username "password" -b = take the password that we specify in the command (don't prompt for it) -c = create the filename username=username password=password (I use quotes because it breaks if you use special characters)........
  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........
  • Dell Perc 6/i SATA benchmarks without battery


    The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results. This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane. Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: N/A De........
  • Dell Perc 6/i Restore BIOS/Bricked Solution Guide Howto


    I bricked one of my cards by following a guide from UNRAID. Step #1 from them wipes out the BIOS, but guess what? The step where you restore the BIOS should have been done first, which is sas2flash but no version supports or is able to find my Perc 6/i. So now I'm a bit stuck. I tried using megarec but it's funny that it can wipe the BIOS but can't forcefully reload it: megarec -writesbr 0 mpt2sas.rom Supports 1078 control........
  • Dell Perci 6/i Firmware Upgrade Guide Tutorial


    One thing to remember is that you need MegaCli to do the flashing. You also need the correct file,I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli(they were really the wrong version). I have an external PCI-E Dell 6 Perc/I butI chose images from the 'Integrated" on motherboard version as it was allI could find. They are different, and below is my first time finding success.........
  • Dell Perc 6/i cannot downgrade


    I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally. I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN --2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN Resolvi........
  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
  • rpmforge Centos 6 x64 howto install


    rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt rpm -ivh http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm Retrieving http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm Preparing... ########################################### [100%] 1:rpmforge-release #############........
  • pxe-32 tftp open timeout


    pxe-32 tftp open timeout The solution was to enable tftp in xinetd with "chkconfig tftp on". See the troubleshooting below: chkconfig --list NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off&n........
  • bash script howto use heredocand assign to a variable and write to a file


    zonetemplate=$(cat ........
  • yum update error


    yum update error Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 229, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 145, in main (result, resultmsgs) = base.buildTransaction() &nbs........
  • bash how to read a single line or filenames with spaces solution


    This happens all the time, you are reading from a textfile which has spaces eg: datainfo 00 datainfo 11 If you do loop on it like this: for info in `cat $file`; do echo "info=$info" done It will treat datainfo and 00 as two separate lines: info=datainfo info=00 Obviously that's not what we want and there are many weird solutions in bash bu........
  • package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture solution


    package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture Linux etc 2.6.18-274.7.1.el5xen #1 SMP Thu Oct 20 17:06:34 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux As you can see above architecture and kernel is 64-bit but I had to force it to install using "--ignorearch" Solution #rpm --ignorearch -ivh kernel-xen-2.6.18-274.7.1.el5.x86_64.rpm Preparing...&nb........
  • kernel: EDAC MC0: CE page 0x0, offset 0x0, grain 1073741824, syndrome 0x1a, row 2, channel 0, label "": i3200 CE


    kernel: EDAC MC0: CE page 0x0, offset 0x0, grain 1073741824, syndrome 0x1a, row 2, channel 0, label "": i3200 CE I believe this is a hardware issue, it's usually bad RAM, incompatible RAM or bad timing or even a motherboard/RAM controller.........
  • convert PDF to JPG howto in Linux


    Use imagemagick: convert -density 200 file.pdf file.jpg Increase the "density" value to get a higher resolution/larger file an decrease it to go smaller. This is really the quickest and simplest way. Some issues you may have: http://realtechtalk.com/ImageMagick_Convert_PDF_Not_Authorized-2217-article........
  • css custom table class howto


    table.custom { border-collapse: collapse; border-style: solid; border-width: 1px; border-color: black; font-size: 11px; } table.custom td { border-collapse: collapse; border-style: solid; border-color: black; &........
  • GIMP change from grayscale to color/RGB howto


    Image -> Mode -> RGB........
  • WD 20EARX Dead Again


    Another new drive bad from the start: Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC } Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........
  • Openvz "Container is currently mounted (umount first)" solution


    Container is currently mounted (umount first) The container is stuck in the "mounted" state, you must manually start it to get it out of that state (there is no umount option as implied by OpenVZ vzctl).........
  • Linux/ffmpeg How to remove audio from a video solution


    ffmpeg -vcodec copy -i 20130526_195809.mp4 -an 20130526_195809-noaudio.mp4 Withotu the -vcodec copy I got this error (so make sure you use the vcodec copy switch): Error while opening encoder for output stream #0.0 - maybe incorrect parameters such as bit_rate, rate, width or height ........
  • find only directory names in Linux


    find / -name 'thedirectorytofind' -type d That's all there is to it and now you don't have to get a listing of all the files along with it. Another cleaner solution that supports wildcards is the following find prep-*/dvd-slideshow_temp*/ -type d ........
  • Asterisk DOS attack - failed for '173.242.117.192' - Peer is not supposed to register [May 23 15:46:07] ERROR[32748]: chan_sip.c:13158 register_verify: Peer '153' is trying to register, but not configured as host=dynamic


    This happened to a customer Asterisk server and it somehow found the ID of the registration account to the upstream SIP server and was railing connection attempts (it filled up the console and there were literally thousands per second). Basically this caused all incoming and outgoing calls to fail. It was a temporary fix but the solution was to block that specific IP, it's hard to stop it 100% because the customer needs the default SIP port.........
  • WD 20EARX 2TB Bad within days


    This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad. ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0 ata1.00: irq_stat 0x40000008 ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/00:00:........
  • Powersupply Issue, Motherboard AHCI issue?


    This is the most I can get when plugging in a hard drive hot and only on some power connectors. [71656.314271] ata5: exception Emask 0x50 SAct 0x0 SErr 0x90a02 action 0xe frozen [71656.314277] ata5: irq_stat 0x00400000, PHY RDY changed [71656.314285] ata5: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B } [71656.314294] ata5: hard resetting link [71660.360686] ata5: softreset failed (device not ready) [71660.360694] ata5: applying........
  • mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142) - Solution


    mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142) One of my clients almost found out the hard way, here is an unlikely situation that happened. 1.) Years ago the client had another VPS to which they backed up a BLOG nightly to an .sql file, what they forgot is that the file also contained all databases (they used the --all-databases option but forgot). So imagi........
  • mysql how to execute script from the bash prompt .sql


    mysql -u username --password='yourpassword' ........
  • Country List Names in HTML Select From


    This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others: Choose CountryCanadaJapanUnited StatesUnited KingdomAfghanistan........
  • mdadm create RAID 1 array example


    mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sda3 /dev/sdb3 cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb3[1] sda3[0] 1363020736 blocks super 1.2 [2/2] [UU] [=>...................] resync = 8.3% (113597440/1363020736) finish=276.2min speed=75366K/sec ........
  • SSH Can't Login/Hang


    Client Log OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.1.253 [192.168.1.253] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_d........
  • bash for loop script for a specified number of times example


    for entity in {1..20}; do echo "entity=entity" done The above will loop 20 times, you could also do {2..50} etc... for entity in {0..10..5}; do echo "entity=entity" done The above will loop 10 times but will start from 0 and increment by 5 each time.........
  • Directadmin error/** Found 7 pre-existing rpmdb problem(s), 'yum check' output follows: e2fsprogs-devel-1.41.12-3.el6.i686 has missing requires of e2fsprogs-libs = ('0', '1.41.12', '3.el6') e2fsprogs-devel-1.41.12-3.el6.i686 has missing requires of l


    Solution To The Following: yum -y install zlib-devel yum -y install e2fsprogs* *** Cannot find /usr/include/et/com_err.h. (yum install libcom_err-devel) *** Installation didn't pass, halting install. Once requirements are met, run the following to continue the install: cd /usr/local/directadmin/scripts ./install.sh Common pre-install commands: http://help.directadmin.com/it........
  • Bad Hard Drive Slows Down Computer


    Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........
  • How to log all PHP based E-mails for abuse


    Step #1 - Create Wrapper Script vi /usr/local/bin/phpsendmail #!/usr/bin/php ........
  • Centos 6 RTL8111/8168B r8169 link up and down error solution/fix


    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) For whatever reason it seems the r8169 driver that ships and has shipped with most Linux distros for years is still flawed and does not work properly on these cards, causing 100mbit connectivity when it should be 1gbit and even worse, causing random network dropouts. The r8169 driver in Linux kernels is simply not meant to be used on th........
  • KVM support Ubuntu 12.04 or 12.10


    This seems to be a verified bug on KVM with no solution. I wasn't able to get through the installer with Ubuntu 12.04, it would crash while "configuring apt". I was able to install it with Ubuntu 12.10 but it crashes randomly at times. This happens with the latest Centos 6.3 kernel and KVM package, I even compiled the latest version from the KVM website and used that, but the results are still the same. Here's some links to discussion about the bugs:........
  • FBDIMM /PC5300F RAM chips can work properly be with mixed timing/speeds


    I've read some people/sources say "the timing must match or it won't work". This is not true at least for the Supermicro boards I've tested this on. Some examples: PC2-5300F-555-12 PC2-5300F-555-11 etc.. Notice the "12" and "11" Also the ones that have a "PC2-5300F-555-11-B0" or "PC2-5300-555-11-D0" are also fine. What happens is what one would expect, the........
  • How-to Change Thunderbird Profile


    thunderbird -ProfileManager Type that from the command prompt and you can choose, that's the only way you can do it whichI find a bit silly.........
  • How to install GRUB to the MBR of a disk image.


    cat | grub --device-map=/dev/null Now pay close to the attention of the beginning. Type: "device (hd0) VPS.img" this is telling what hd0 will be to GRUB and we're telling it the disk image file "VPS.img" in the current directory is hd0, you can specify alternate paths and image names of course. GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-li........
  • kvm cannot boot xen guest using lvm


    This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel. I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk. I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one). This is strange but it seems like this Xen PV guest has some sort of hidden or........
  • lvm resize and use the remaining extra space


    df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_12-lv_root 50G 1.2G 46G 3% / tmpfs 7.8G 0&nb........
  • Setup PXE Boot using Centos and dhcpd, tftp and syslinux


    This is something I often setup for clients because it's very helpful for people in datacenters, this allows custom OS installs on demand, you can customize it more by using kickstart etc.. but here's a base I use before customizing more: This little script below will install everything you need to get booting by PXE Linux. It also assumes you set a local IP (be sure not to overwrite your existing IP) on eth0:0 (note the :0) as 192.168.1.10 and it........
  • How to Encode all VOBs from a DVD/Bluray VIDEO_TS folder into an XVID


    In my case I already copied the VIDEO_TS folder to my hard drive. Here is the command for mencoder: mencoder -dvd-device "myvideobackup/VIDEO_TS" dvd:// -ovc xvid -oac mp3lame -lameopts cbr:br=128 -xvidencopts pass=2:bitrate=-700000 -o myvideobackup.avi Replace "-dvd-device myvideobackup/VIDEO_TS" with the location of your backup files or the /dev device of your DVD drive. The -o myvideobackup.avi is of course the name o........
  • Thunderbird How-To Copy/Backup/Restore Accounts and Settings to Another Computer


    The best way is to use rsync, I've set it up so it doesn't copy unnecessary files, or at least ones I'm sure aren't needed. Here is the rsync command Iused (adapt to your specific Thunderbird profile location): rsync -hazv user@remotehost.com:/home/user/.thunderbird/sbrer.default/* /home/user/.thunderbird/4nyb0.default/ --exclude=global* --exclude=Cache --exclude=ImapMail --exclude=Mail This is a great way to get your e-mail accounts going on a new c........
  • KVM compilation issue/solution - Disabling PIE due to missing toolchain support glib-2.12 required to compile QEMU


    qemu-kvm-1.2.0]# ./configure Disabling PIE due to missing toolchain support glib-2.12 required to compile QEMU Solution install glib2 *Don't confuse glib2 with glibc, they are different and it may catch some off guard. yum -y install glib2* After that KVM should compile and install just fine.........
  • KVM Windows 7 won't boot Virtual Machine/VM after install solution


    This seems to be common for some reason when trying to run Windows 7 under KVM and 7 has always had strange issues with KVM. What happens for me is after the install it simply won't boot, it stays on the POST screen and does nothing. For some reason it appears the boot sector either doesn't get installed or gets corrupted with KVM. The solution is to boot the install disc for Windows 7 and reinstall the windows MBR into the boot sector: 1. Boot t........
  • KVM/QEMU Base/Template Images and the power they provide


    qemu-img create -b centos.5-8.x86.20120308.qcow2 -f qcow2 ../kvmguests/25000-centos5.8x86.qcow2 Formatting '../kvmguests/25000-centos5.8x86.qcow2', fmt=qcow2, backing_file=centos.5-8.x86.20120308.qcow2, size=10485760 kB -b the source/base image -f format is qcow2 and the location of the destination image What is so special about this? It's even quicker than creating a template with OpenVZ but this is an actual OS. It saves time a........
  • How to mount/access a single partition from dd image with Linux


    parted sdc.img GNU Parted 1.8.8 Using /home/one/sdc.img Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) unit&nb........
  • Linux/Centos how to block SSH bruteforce/dictionary attacks automatically with denyhosts


    A lot of people become nervous (and understandably so) when checking their auth or security logs, in Centos /var/log/secure and see dozens, hundreds of even thousands of attempted logins to various services, especially SSH. Of course you could manually block these people/IPs but no one has time to read the logs like that, what if some program or script could do it for you? This is what denyhosts does for you, it checks the logs and based on a certain number of failed SSH attem........
  • Centos how to upgrade from PHP 5.2 to 5.3 without downtime


    This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server). You may need to upgrade to PHP5.3 to run Joomla or many other reasons. Your host needs to use PHP 5.2.4 or higher to run this version of Jo........
  • xen how to resize an image properly


    The best way I could figure out is to use another guest of some sort to do this, while assigning the disk that needs to be resized to the same guest. So say we have /dev/xvda as the guests drive and we've booted it up. We also have /dev/xvdb (this is going to be the image/disk to be resized). In this case it's based on an ext3/4 image. Run e2fsck on it to ensure there are no filesystem errors. e2fsck /dev/xvdb........
  • ntpd[7047]: can't open /var/lib/ntp/drift.TEMP: Permission denied solution


    ntpd[7047]: can't open /var/lib/ntp/drift.TEMP: Permission denied chown ntp.ntp /var/lib/ntp/ The solution is shown above and changes the ownership to ntp.ntp which is what the ntpd daemon/server is running as. This is based on Centos but the same idea will apply on any other OS. You can do a "ps aux|grep ntpd" to see what it is running as in the case it's running as a different user. After that this annoying message wil........
  • Joomla Error - JFolder::create: Could not create directory


    JFolder::create: Could not create directory Plugin Install: Failed to create directory: This can occur when trying to upload content or when installing themes/templates. It's usually not a permissions issue per say but doing a 777 (which is very insecure) will fix it. But the real problem solution is that the owner of the files is different than the owner of the Apache process/server. Eg. if your Apache is running as user "apache........
  • MySQL Authentication fails after Upgrade to Version 5.5


    ERROR 1045 (28000): Access denied for user 'contentmanager'@'localhost' (using password: YES) For fun I thought I'd reset the password: GRANT ALL ON thecontent.* TO contentmanager IDENTIFIED by 'dfdfsdfdsfsdfsd'; ERROR 1470 (HY000): String 'contentmanager' is too long for user name (should be no longer than 16) This is ridiculous that this new version has some bizarre 16 character username limit and not only that but i........
  • Windows Secret Hidden Temp Directory to free out of disk space issues


    Replace "Administrator" with your username. C:Documents and SettingsAdministratorLocal SettingsTemp Ihave often found several gigabytes of temporary files in there! Just be warned that they may not all be deletable if the files are being used by open programs (so close everything you can). This helped me in a pinch many times when for apparently no reason gigs of disk space are being used for an unknown reason.........
  • HowTo Migrate and Import iPhone/Outlook Contacts into Android without using GMail using .vcf files


    I searched for days after getting my Galaxy Note and couldn't find a way to do this (at least not without buying programs for either Android/Windows). All I read was ways to sync and import the contacts to GMail but I don't want to use GMail for privacy reasons. GMail/Google steal all of your personal information and use it for whatever purposes they want to and may sell or release it to who knows where (I don't care what their policy says but this stuff happens), just like the default........
  • failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)


    [ 12.460014] ata1: SRST failed (errno=-16) [ 17.626677] ata1: link is slow to respond, please be patient (ready=0) [ 22.480011] ata1: SRST failed (errno=-16) [ 27.646681] ata1: link is slow to respond, please be patient (ready=0) [ 38.106817] ata1.01: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 48.266676] ata1: link is slow to respond, please be patient (ready=0)........
  • How To Install CPanel


    wget -N http://httpupdate.cpanel.net/latest;sh latest That one command above will do it all (and it takes a long time to install/compile). After that you can access CPanel with your root login information by visiting https://yourdomain-or-ip.com:2087 I personally don't like CPanel (bloated, full of bugs, no shared SSL, difficult to use etc..)but I admit it's easier to install than........
  • LOG: MAIN PANIC failed to expand condition "${if eq {$authenticated_id}{}{0}{${if eq {$sender_address}{$local_part@$domain}{0}{${if match{$received_protocol}{N^e?smtps?a$N}{${perl{checkbx_autowhitelist}{$authenticated_id}}}{${if eq{$received_prot


    I experienced this with CPanel's Exim after an auto-update (a Google of this error produces lots of complaints with few clear solutions). In this case I'll put the solution at the top. Run /scripts/buildeximconf to rebuild the Exim config and it should be fine after that. mail -vs "from test" user@dest.com < .bash_history LOG: MAIN cwd=/root 4 args: send-mail -i -v user@dest.com LOG: MAIN &........
  • Firefox 11 closes/quits without saving Open Tabs Prompt Solution/Fix


    Type "about:config" in your browser and then search for "Quit" Set these values to true browser.showQuitWarning browser.warnOnQuit........
  • The Importance of a High Quality Power Supply/Power Supplies To Prevent Overheating/System Crash/Hardware Damage


    For years I've always built cheap systems believing that there is little difference in more expensive components when it comes to reliability and quality, I generally believe this still except for Power Supplies. I've always bought cheap cases with nice sounding 350-550W stock/cheap/crap power supplies and haven't had any issues for the most part until recently. One such case is an NGEAR case with a 550W Optimax power supply, I always read that these supplies don't produce the........
  • Asus VE247H 23.7" Inch LCD/LED Backlit Monitor Dead/Stuck Pixel Policy Complaint


    I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen. I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........
  • Linux Ubuntu Nvidia GT430 Lockups/Errors/Freezes NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context


    I'm running Ubuntu 10.10 with Asus NVIDIA GT430 2.6.35-32-generic-pae #65-Ubuntu SMP Tue Jan 24 14:06:16 UTC 2012 i686 GNU/Linux Nvidia binary driver: 260.19.06 The screen sometimes completely freezes and locks up or everything starts going very slow: [1903398.100007] NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context [1903402.373210] NVRM: Xid (0001:00): 53, CMDre 00000000 00000080 00000000 00000005 00........
  • Ubuntu 10.04 Flash Videos have tearing/lines Solution


    This is what I call a ridiculous bug in compiz that causes it. The solution/To fix it just install "compizconfig-settings-manager" Open it up and Navigate to General Options -> Display Settings Set the "Refresh Rate" to the current refresh rate of your monitor. For ATI cards with slow window dragging/response supposedly disabling "Sync to VBlank" fixes that but otherwise leave it as is.........
  • File /etc/vz/conf/ve-vps.basic.conf-sample not found: No such file or directory - Openvz Error solution


    Stuff like this always happens/breaks after a vzctl update, whether it's new parameters being added or required etc.. File /etc/vz/conf/ve-vps.basic.conf-sample not found: No such file or directory Fix the value of CONFIGFILE in /etc/vz/vz.conf Creation of container private area failed Warning: distribution not specified in CT config, using defaults from /etc/vz/dists/default WARNING: /etc/vz/conf/4400.conf not found: No such file or directory........
  • Ubuntu 10 Nvidia Drivers Not Updated After Kernel Update Solution/How-To Manually Rebuild nvidia kernel modules for Ubuntu


    I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene. This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately). The most common reason may be that "linux-source" hasn't been installed automatically on my system. I tried to manually reinstall the........
  • What's Needed To Fix Linux


    I really am a Linux fan but my comments here may not show it. Although I'm quite familiar with Linux CLI to administer servers, I find Linux GUI OS's like Ubuntu at times very clunky. This is partially because there's no such thing as a "self-made" Linux from scratch where the UIwas designed by a single team. Linux is made up of several different projects that are generally completely separate and this lack of integratiion is a key issue that makes things f........
  • How To Burn ISO Image using cdrtools/dvdrtools for Linux/Unix Ubuntu/Debian/RHEL/Centos etc..


    It really is as simple as: cdrecord -v dev=/dev/sr0 pathtoyourisoimage.iso -v is for verbose, I prefer it but if you don't you won't see as much output like below (I like to know the details and exactly what's happening) dev=/dev/sr0 specifies the device name of your burner (they say not to use it and to specify some weird annoying device string but using the raw /dev has always worked for me and is how it should have been implemented from the start IMHO)........
  • gocr - free Linux OCR (Optical Character Recognition) conversion tool


    gocr works great and it's simple, just invoke it like so: gocr filename.png The output will be printed to the screen. My only complaint/concern is that even with standard terminal output (not scanned) from a printscreen, gocr does make mistakes by inserting extra spaces where they don't belong, mistaking letters for numbers etc.. but it's definitely enough to be readable and figure out what you're looking at. I haven't tested yet with scanned input........
  • Hitachi HDD/Drive RMA Process Experience


    The first Hitachi Deskstar 2TB 5K3000 drive I bought arrived DOA for whatever reason (not recognized by the BIOS or OS). Perhaps it was shipping since I bought only 1 hard drive. When I bought 4 through another Vendor, all 4 checked out fine. I was worried about the RMA process because a lot of people have complained about Hitachi taking weeks to send out their hard drive and almost implied the warranty is useless. I'm happy to report that my experience was great a........
  • MySQL Import CSV data tutorial guide


    It's actually fairly straight forward: load data local infile 'billpayments-payments.csv' into table payments fields terminated by ',' enclosed by '"' lines terminated by 'n' The above assumes that your fields are terminated by a comma (some programs like OpenOffice change this to a semi-colon ;) and that they are enclosed with " The above will insert the data from billpayments-payments.csv into the table payments.........
  • vino crashed/stopped working, restart vino manually without rebooting


    The normal solution would be as follows: export DISPLAY=:0.0 /usr/lib/vino/vino-server & But what happens if that doesn't work? I haven't been able to find much documentation about how to find the list of displays and how their numbering works in Xorg. Sometimes you'll get this error when trying to restart vino: Cannot open display: For some reason my display is not on 0.0........
  • vi disable color syntax highlighting/can't read syntax highlighting


    Within vi if you can't exit /etc/vim/vimrc you can type :syntax off And to turn it back on: :syntax on Many of us have a dark/black background in our terminal/shell making the default syntax unreadable, the solution is to either turn off syntax highlighting with :syntax off or to enable a special option in /etc/vim/vimrc Edit /etc/vim/vimrc The "syntax on" enables the highligh........
  • wget download all files on page/directory automatically recursively


    Have you ever found a website/page that has several or perhaps dozens, hundreds or thousands of files that you need downloaded but don't have the time to manually do it? wget's recursive function called with -r does that, but also with some quirks to be warned about. If you're doing it from a standard web based directory structure, you will notice there is still a link to .. and wget will follow that. Eg. let's say you have files in http://serverip/documen........
  • Linux Out of Memory OOM Object Killer Solution "Out of memory: kill process 1955 (sshd) score 81 or a child"


    I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM. I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives? Also no swap space was ever used! cat /proc/s........
  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
  • smart is not smart, it thinks a dead drive is still good


    I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior: === START OF INFORMATION SECTION === Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZ20139 Firmware Version: 50.0AB50 User Capacity: 2,000,398,934,016 bytes Device........
  • GRUB Solution to error "Error 6: Mismatched or corrupt version of stage1/stage2"


    GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.] grub> root (hd1,0) Filesystem type is ext2fs, partition type 0xfd grub> setup........
  • Hitachi 2TB HDS5C3020ALA632 drive DOA


    I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead): ata1: link is slow to respond, please be patient (ready=0) ata1: softreset failed (device not ready) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: link online but device misclassified, retrying ata1: link is slow to respond, please be patient (ready=0) ata1: softreset f........
  • Kernel/make compilation time and how to improve compile times/compile the Linux kernel faster without hardware upgrades


    I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though. There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........
  • Linux how to use find recursively to find certain types of files/extensions


    Normally if you're in a certain directory you could do: find *.txt and it will work as expected, but it won't work recursively through child directories, here's the correct way to do it: find . -type f -name *.txt The "-type f" is optional because that means only files, but we could have specified d for directory etc... The above command will work recursively as you'd expect. In that way I find "find" to be un........
  • VBox/Virtualbox how to shrink VDI image and recover/reclaim unused disk space


    VBoxManage modifyvdi /path/to/your.vdi compact I believe this should be done only when your VM is powered off, but I decided to try it with the system powered on. i wouldn't recommend it because it's dangerous even if it does work but this is a test system. For anything important/production I would always take a backup first and make sure the system is powered off. VBoxManage modifyvdi XP-clone.vdi compact 0%...10%...20%...30%...40%...5........
  • Virtualbox How To Clone VM/Container VDI file


    You can't just do a straight copy of the VDI image of your virtual machine because there is a unique UUID, wellI believe you can and then you can create a new UUID manually (at least you could with VMWARE) but to keep it clean just use this method: VBoxManage clonevdi /path/to/your.vdi outputname.vdi 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% That's all there is to it, just wait for it copy and you can th........
  • Directadmin Solution "This is e-mail notification to warn you that your hostname is setup improperly on your system."


    This is e-mail notification to warn you that your hostname is setup improperly on your system. This is an annoying message and bug with Directadmin, my hostname is set correctly, why does it complain? To get of this message just run this command: /usr/local/directadmin/scripts/hostname.sh yourhostname.com........
  • Kernel linux-2.6.39 In file included from drivers/block/cciss.c:1015: include/asm-generic/pci-dma-compat.h: In function `cmd_special_free': drivers/block/cciss.c:196: sorry, unimplemented: inlining failed in call to 'cciss_tag_discard_error_bits': fu


    In file included from drivers/block/cciss.c:1015: include/asm-generic/pci-dma-compat.h: In function `cmd_special_free': drivers/block/cciss.c:196: sorry, unimplemented: inlining failed in call to 'cciss_tag_discard_error_bits': function body not available include/asm-generic/pci-dma-compat.h:25: sorry, unimplemented: called from here make[2]: *** [drivers/block/cciss.o] Error 1 make[1]: *** [drivers/block] Error 2 make: *** [drivers] Error 2........
  • mysql enable slow query logging/Query Cache Solution - find/track cause of slow mysqld/high IO/CPU usage


    If you have a webserver and find you have high IO/lagginess MySQL is one of the first things to check. It turns out MySQL was my problem and it was creating a high load on my server, especially for IO. How to Enable MySQL Slow Query Logging To Find Slow Performance/Queries vi /etc/my.cnf Add this anywhere under [mysqld] #slow queries log-slow-queries = /var/log/mysql/mysqlslowqueries.log long_query_time = 1........
  • PayPal Solution - Error Detected Error Message We were unable to decrypt the certificate id. We were unable to decrypt the certificate id.


    Error Detected........
  • Upgade VBOX/Virtualbox 3.2 to 4.0 in Linux


    I was afraid to remove the virtualbox 3.2 package in Ubuntu because I didn't know if it might remove the .virtualbox folder which contains all of my VM data. I have a backup soI did remove the package and found everything was intact, so I installed and upgrade to VBOX 4.0 which seems to be a huge improvement, especially in UI performance.........
  • Linux OCR Comparison


    http://www.splitbrain.org/blog/2010-06/15-linux_ocr_software_comparison They did a great writeup and comparison on the different OCR options available for Linux.........
  • encrypt bash scripts to hide source code


    http://www.datsi.fi.upm.es/~frosal/ SHC is a program written by the author above that does just that, it's a great little tool to have. Some have said it isn't exactly encrypting the code but just making it hard to read by obfuscating the code. There was also a good discussion about that here:........
  • SMARTCTL additional SMART command testing using short and long tests


    smartctl -t long /dev/sda (note you can specify short, but it's not as thorough as long of course). smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended sel........
  • 2011 Best Laptop - HP 15.6" Laptop featuring AMD Athlon II P340 Processor (G62-420CA)


    My mother needed a new laptop and I recommended her the same one I would have bought myself or my wife, that means the cheapest possible laptop with the most features for the money. This HP shines at this price point and one thing that made me stay away from buying more and recommending HP/Compaq was the poor battery life. Not anymore, this model has an industry leading up to 4 hours of battery life. Key Factors for Choosing It: HDMI Out........
  • Yahoo Mail (email) DNS Server Out Of Date Problems


    I don't expect this to be solved soon but some of Yahoo's DNS servers are out of whack. I changed the IPs of some nameservers of some domains and now most Yahoo users can't e-mail to those domains! As you can see below by the "No MX or A records for mychangedomain.com", now Yahoo's DNS/mailserver DNS cache is wrong. You would think they would at least have cached the old incorrect records, but instead for some reason their DNS cache has no entry and doesn't seem........
  • Linux High IOWAIT updatedb can't be killed and crash with mdadm


    high IO wait 424 root 39 19 1900 848 552 D 0.0 0.0 0:00.91 updatedb root 424 0.0 0.0 1900 848 ? DN Mar11 0:00 /usr/bin/updatedb -f sysfs?rootfs?bdev?proc?cpuset?binfmt_misc?debugfs?sockfs?usbfs?pipefs?anon_inodefs?futexfs?tmpfs?inotifyfs?eventp........
  • Santrex Review Scam Complaint - Stole My Money Fraud


    Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support admitted the server was not working and to wait for 24 hours. I waited for 4-days, after which they sent an e-mail saying my service was being disabled for SPAM ...(when SolusVM shows 0kb of traffic). Th........
  • Firefox Download Error - /tmp/J_5JHKXU.bin.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator.


    /tmp/J_5JHKXU.bin.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator. This is actually not a download problem related to the server/site you're using but actually some weird bug with Firefox. I know because no matter what site I tried to download from this error kept happening. Simpy restarting Firefox was enough to get things working again.........
  • Virpus Review/Scam/Complaint


    Virpus Review/Scam/Complaint Virpus is advertised on LEB (lowendbox.com). My initial payment was refunded after days of not receiving the VPS, but two subscrption payments went through and Ionly received notification after the second one. They ignored the requests in the ticket and by e-mail for a refund and even escalated the PayPal dispute that "we're assuming this is for a service that was provided" (when they obviously know otherwise by........
  • 95th Percentile Billing vs Usage Billing, what's better?


    There are all kinds of threads and links on the internet, and this seems to be a contentious issue butI don't know why. 95th percentile is either a good deal for some or a big rip off for others, Ijust said it there :) But the reality is that for MOST people who transfer low amounts of data but burst to higher speeds such as 40mbit+ even for short periods of time, then you'll pay a lot of money to do that. Basically 95th percentile is an-old archaic method........
  • Virtualbox - Failed to open a session for the virtual machine XP. AMD-V is being used by another hypervisor. (VERR_SVM_IN_USE). - Solution


    Failed to open a session for the virtual machine XP. AMD-V is being used by another hypervisor. (VERR_SVM_IN_USE). VirtualBox can't enable the AMD-V extension. Please disable the KVM kernel extension, recompile your kernel and reboot (VERR_SVM_IN_USE) Solution - Unload KVM module (you can't use two hardware virtualization suites at once) sudo rmmod kvm_amd kvm........
  • Apache MPM worker vs prefork


    find what MPM Apache is using, it will either be using "worker" or "prefork" apachectl -l Compiled in modules: core.c prefork.c http_core.c mod_so.c In my case it is "prefork" vi /etc/httpd/conf/httpd.conf Find the section that looks like this (by default one will normally exist for prefork and for worker, but in my case I only care a........
  • Linux - mptbase/MPT Fusion LSI Logic Error mptbase: ioc0: ERROR - didn't initialize properly! (-1)


    kernel 2.6.27.54 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 mptbase: ioc0: Initiating bringup mptbase: ioc0: WARNING - Unexpected doorbell active! mptbase: ioc0: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000001! mptbase: ioc0: ERROR - Diagnostic reset FAILED! (102h) mptbase: ioc0: WARNING - NOT READY! mptbase: ioc0: ERROR - didn't initialize proper........
  • VPS Server Scam/Review/Complaint List


    These are the only two I've encountered but here is the low-end and note my story is not at all unique. In my case I was scammed out of money and did not receive any service at all from either company. Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support adm........
  • ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory solution


    ls ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory This is not an ldd problem or case of anything missing, this only happened after I upradedUbuntu. declare -x PATH="/home/user/bin:/usr/local/bin:/usr/bin:/bin:/usr/games" "/home/user/bin" is the problem! It's weird because I have no idea how it happened.........
  • Amarok won't play songs, keeps skipping to the next


    Amarok won't play songs, keeps skipping to the next Some say install install phonon-backend-xine but it was already installed automatically, obviously that's not the problem or solution. Settings -> Configure Amarok Playback: Configure Phonon Audio Output: Music It should show your different audio interfaces, choose Pulse Audio and move it to the top of the list, do the Apply, OK and manually quit Amarok (remember to close it from the tra........
  • OpenOffice Calc SUM function not working Solution - Result is always 0/apostrophe appears in front of all numbers.


    I right clicked all applicable cells and chose "number" but that's enough. I notice when I click the cell there is an invisible ' in front of the number: '33.64 Calc imported my CSV and decided to add a ' in front of the numeric currency values!!!*Actually the problem occurs when you right click the cells and change the type from text to number, no matter what format you choose. If I change it to be currency i........
  • Thunderbird/MBOX to IMAP/Maildir migration done easy with mb2md


    Convert MBOX Mail files into Maildir using Linux *You need perl an the TimeDate module Get the free Perl script mb2md from the project/author's site: wget http://batleth.sapienti-sat.org/projects/mb2md/mb2md-3.20.pl.gz gunzip mb2md-3.20.pl.gz #remember you need timedate or you'll get this error: ./mb2md-3.20.pl Can't locate........
  • MySQL NEVER delete ib_logfile0 or ibdata1 or you'll lose data


    don't delete /var/lib/mysql/ib_logfile0 or ibdata1 or mysql won't restart I didn't realize they were internal and not part of replication like the relay files! /usr/libexec/mysqld: ready for connections. Version: '4.1.22-log' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution 110127 16:31:00 [Note] /usr/libexec/mysqld: Normal shutdown 110127 16:31:00 InnoDB: Starting shutdown...........
  • email server messsages rejected without reverse DNS DNS check failure Client host rejected: cannot find your reverse hostname Cannot resolve PTR record


    Basically you should always be 100% sure that whatever IPyour mail server sends out with has reverse DNS/PTR records. Remember that unless you own your IPs then you won't be able to set your own reverse DNS. Even if you were to create a reverse PTR record on your DNS servers it will be ignored. Reverse DNS is queried to pre-assigned DNS servers of your ISP, so therefore you'll need to contact your ISP/Colo/Hosting provider to do a reverse DNS entry. If you don't have........
  • CPU #1 not responding - cannot use it.


    I think this will be useful to others because I have a server that kept crashing mysteriously during intense disk usage/RAID checks. It would only crash during the weekly RAID integrity check. ThenI noticed during a reboot that not all CPUs were being brought up, as a result this actually creates much higher temperatures with the output I got from sensors, just booting the system produced higher than normal temperatures. You can imagine that a full blown RAID check........
  • Understanding /etc/aliases from sendmail when using with postfix or other MTA's


    understanding /etc/aliases *remember to apply changes you need to run "newaliases" after editing /etc/aliases one thing I don't get is that it doesn't allow you to specify the whole e-mail address on the left-hand side eg: yourfullemail@domain.com: someotheremail@domain.com postalias: warning: /etc/aliases, line 109: name must be local (if you try the above) It works more like this: your........
  • mysqldump does not include CREATE DATABASE statement


    mysqldump does not include CREATE DATABASE statement you need the --databases option "--databases" is misleading, it implies in the documentation that this is a list of databases to be dumped, it should be clear that uses this command in conjuction with dumping a single database also adds CREATE DATABASE and is the only way to get the database to automatically create itself.........
  • Ubuntu 9.04 Crash


    CPU/Kernel/MB/RAID problem? Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168] Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........
  • Importing Plesk 8.6 Backup to Virtualmin: Validating migration file .. .. validation failed : XML::Simple Perl module is not installed


    Importing Plesk 8.6 Backup to Virtualmin: Validating migration file .. .. validation failed : XML::Simple Perl module is not installed Solution is to install the correct module: perl -MCPAN -e 'install XML::Simple' Migrating a single domain works just fine, but it doesn't work with a full client backup containing multiple domains.........
  • mysql backup/dump all databases with mysqldump command


    mysqldump --all-databases > allDB.sql The above dumps ALL the mysql databases to "allDB.sql". If you want to compress with gzip you could do this instead: mysqldump --all-databases > gzip > ALLDB.sql.gz........
  • Installing Webmin & Enabling SSL


    Webmin Setup Centos 5: wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet [1] 24229 [2] 24230 [root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html Resolving downloads.sourceforge.net... 216.34.181.........
  • SSH delay problem UseDNS and disabling GSSAPI does not help


    The normal solution doesn't help or apply here: ssh -v user@192.168.5.41 OpenSSH_4.3p2 Debian-9etch3, OpenSSL 0.9.8c 05 Sep 2006 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.5.41 [192.168.5.41] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: i........
  • Linux Realtek Gigabit NIC huge/high latency problem after sleep?


    That is pinging to the gateway IP on the same switch, the same IP is pingable externally without any problems which makes me think the switch is fine. 64 bytes from 55.55.55.55: icmp_seq=4 ttl=255 time=1.07 ms 64 bytes from 55.55.55.55: icmp_seq=1 ttl=255 time=3536 ms 64 bytes from 55.55.55.55: icmp_seq=2 ttl=255 time=2536 ms 64 bytes from 55.55.55.55: icmp_seq=3 ttl=255 time=1536 ms 64 bytes from 55.55.55.55: icmp_seq=8 ttl=255 time=1.20 ms 64 by........
  • mdadm/md-check how to check array integrity without rebuilding


    This doesn't seem to be widely known (maybe it's in some documentation that none of us read though)but there's an easy way to check the integrity of any mdadm array: sudo echo check > /sys/block/md0/md/sync_action -bash: /sys/block/md0/md/sync_action: Permission denied sudo will never work, this only works as root since echo is not actually a binary/command. It is built-into bash. /sys/devices/virtu........
  • Cygwin and crontab backups via ssh/scp/rsync


    Install the "Editors" and "Net" groups that will give you rsync, ssh, ssh-keygen and cron. The trickiest thing that I keep forgetting about each time is you have to run "cron-config" which adds the cron service to Windows, and without doing that obviously no cron jobs will be run thus making automatic backups impossible. Warning about rsync/cygwin and using the -a archive switch. It's a good thing I caught this because it doesn't work ri........
  • md: data-check of RAID array md3


    This really made me nervous but notice the mdstat says "check". This is because in Ubuntu there is a scheduled mdadm cronscript that runs everyday on Sunday at 00:57 that checks your entire array. This is a good way because it prevents gradual but unnoticed data corruption which Inever thought of. As long as the check completes properly you have peace of mind knowing that your data integretiy is assured and that your hard drives are functioning properly (I'........
  • How to see what's inside your gziped CPIO'd initrd image


    Copy the initrd to somewhere else, say /tmp: mv initrd.img to initrd.gz *the mv to .gz is needed otherwise gunzip won't work/it will refuse to operate without the correct .gz extension gunzip initrd.gz cat initrd | cpio -idmv The last command extracts the contents of initrd to your present working directory. For 7z .lz initrd........
  • Ubuntu/Debian DRBD 8.0 Setup Guide


    I've only used it on Centos, soI thought I'd make a quick Debian guide: Install the DRBD Package apt-get install drbd8-utils Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libswfdec-0.8-0 Use 'apt-get autoremove' to remove them. The following........
  • VirtualBox Convert Import/Boot .vmdk VMWare Hard Disk/Drive Image Won't Work


    I wanted to Import/Use a .vmdk hard disk image file from VMWare. Generally you can just "point" VirtualBox to it and use it and it will work but I found an exception. One of my Centos 4.4 x64 images wouldn't boot. I had two copies, an older one and the newer one. The older one booted as normal (once I changed the VirtualBox driver to IDE from SATA). The newer one stopped at the "GRUB loading" message no matter what I tried. As far as........
  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........
  • WD EARS/Green 2TB Cannot Disable Power Saving/Head Parking with hdparm


    hdparm -B 255 /dev/sdb /dev/sdb: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well). -S set standby (spindown) timeout hdparm -S 251 /dev/sda /dev/sda: setti........
  • yum error with some versions of Centos Refusing to automatically import keys when running unattended. Use "-y" to override.


    Refusing to automatically import keys when running unattended. Use "-y" to override. When using echo y|yum install gcc Fix with rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*........
  • WD (Western Digital) Advanced Format Drive Lagged/Slow Speed/Performance/Design Flaw EAD/EARS problem WDC WD20EARS-00S8B1


    Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive. This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series. To make it worse this is also when Western Digital introduced "Advanced Format" o........
  • EOL for Kubuntu/Ubuntu 8.04 - W: Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/intrepid/universe/source/Sources.gz 404 Not Found [IP: 91.189.92.171 80]


    I couldn't figure out whyI couldn't install a simple package. This is what's annoying about cutting edge Debian distros, yes we know you support each license on average for 1-2 years but why take down the supporting binary packages and basically disable the older versions? sudo apt-get install update Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find p........
  • PHP Email Attachment Corrupt Solution


    I couldn't figure out why this wouldn't work, a test script in the root of my htdocs folder worked fine. Within some subdirectories the same code would produce different base64 results but I didn't know hwy. Archive: /tmp/archive.zip Zip file size: 6888 bytes, number of entries: 92 error [/tmp/archive.zip]: missing 242827681 bytes in zipfile (attempting to process anyway) error [/tmp/archive.zip]: attempt........
  • Wine stopped working/won't work Solution


    After an upgrade wine wouldn't open anything, not even the pre-installed notepad. There are no wine logs and nothing is mentioned in any standard log file about why. I finally decided to run wine from the shell and see what's going on: wine client error:0: version mismatch 398/402. Your wineserver binary was not upgraded correctly, or you have an older one somewhere in your PATH. Or maybe the wrong wineserver is still running?........
  • Nautilus/GNOME File Manager handy list of extensions


    nautilus-gksu - privilege granting extension for nautilus using gksu nautilus-sendto - integrates Evolution and Pidgin into the Nautilus file manager nautilus-share - Nautilus extension to share folder using Samba nautilus-actions - nautilus extension to configure programs to launch nautilus-bzr - Bazaar (bzr) integration for nautilus nautilus-cd-burner - CD Burning front-end for Nautilus nautilus-clamscan - Antivirus scanning for Nautilus n........
  • GNOME/Nautilus Resize Images/Pictures from File Manager by right clicking


    Just install the following package "nautilus-image-converter" and you will be able to right click any image and convert the size and rotate it. My only wish is that you could also convert the image type from say tiff to jpg etc... This is an awesome/handy/feature and great tool to have. This is one way where GNOME/Nautilus excel, the possibilities are endless to simplify and make simple/mundane tasks quicker and more efficient than ever.........
  • Error: DBus error org.freedesktop.DBus.Error.ServiceUnknown: The name :1.1127 was not provided by any .service files Please select another viewer and try again.


    This is an SFTP mount that does not work or prompt for password. Error: DBus error org.freedesktop.DBus.Error.ServiceUnknown: The name :1.1127 was not provided by any .service files Please select another viewer and try again. It seems to me that the connection often times out after being opened and the application doesn't know how to handle the disconnection and doesn't realize it needs to kill the instance and restart the connection.........
  • Openvz Error Starting OpenVZ: failed to load module vzmon [FAILED]


    service vz start Starting OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzmon: Unknown symbol fini_ve_route6........
  • OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzm


    service vz start Starting OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzmon: Unknown symbol fini_ve_route6 ........
  • Openvz Quick Install for CentOS 5 Tutorial


    cd /etc/yum.repos.d wget http://download.openvz.org/openvz.repo rpm --import http://download.openvz.org/RPM-GPG-Key-OpenVZ yum install ovz-kernel-PAE Now remember to set /etc/sysctl.conf to "net.ipv4.ip_forward = 1" You can apply the change immediately by running sysctl -w net.ipv4.ip_forward = 1 but remember that you still have to set sysctl.conf sysctl -p will load and apply any changes to s........
  • DRBD WFConnection Problem/Solution


    This has stumped me a few times because I keep forgetting that Centos 5.5 comes with a default iptables configuration that ends up blocking DRBD traffic,I tried all the normal things and couldn't understand why I couldn't make my normal DRBD config work. So if you have WFConnection problems and have tried the normal "mailing list" fixes, check your firewall status first! Both Nodes Say the Following: version: 8.3.8 (api:88/prot........
  • mdadm Linux Software RAID QuickStart Guide


    Create New RAID 1 Array: First setup your partitions (make sure they are exactly the same size) In my example I have sda3 and sdb3 which are 500GB in size. mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sda3 /dev/sdb3 mdadm: array /dev/md2 started. Check Status Of The Array *Note I already have other arrays md0 and md1. You can see below that md2 is syn........
  • VirtualBox Error Failed to start the virtual machine Centos 5.5 Mirror. Medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' is not accessible. UUID {a1a9fad7-0402-4867-b8f3-39fb49454bc5} of the medium '/home/testuser/.VirtualBox/HardD


    Virtualbox Error I tried to copy a .vdi of one container to use in another one, basically to clone instead of having to install the OS again. Failed to start the virtual machine Centos 5.5 Mirror. Medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' is not accessible. UUID {a1a9fad7-0402-4867-b8f3-39fb49454bc5} of the medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' does not match the value {4945a0e8-0ed5-4736-9088-bcaf........
  • Installing Virtualbox on Centos 5.5


    wget http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm rpm -i http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm error: Failed dependencies: libGLU.so.1 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386 libSDL-1.2.so.0 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386 libXmu.so.6 is needed b........
  • Openvz Live Migration Error - Error: undump failed: Invalid argument Restoring failed: Error: iptables-restore exited with 2 Error: Most probably some iptables modules are not loaded Error: rst_restore_net: -22


    Adding IP address(es): 192.168.5.8 192.168.5.9 Setting CPU units: 1000 Error: undump failed: Invalid argument Restoring failed: Error: iptables-restore exited with 2 Error: Most probably some iptables modules are not loaded Error: rst_restore_net: -22 Container start failed Stopping container ... Container was stopped Container is unmounted Error: Failed to undump VE Resuming... vzquota : (erro........
  • Solution - error while loading shared libraries: libgd.so.2: cannot open shared object file: No such file or directory


    error while loading shared libraries: libgd.so.2: cannot open shared object file: No such file or directory Solution Install gd: yum install gd After that whatever you are compliing should be happy.........
  • Linux Kernel Boot Black Screen of Death Freeze/Halt Solution


    This happens on some systems due to a video issue with Intel Videocards, after you see the kernel load you may see almost immediately that you get a black screen. The following kernel parameters usually solve it: nomodeset i915.modeset=0 xforcevesa some people just use "nomodeset" and others use "i915.modeset=0". I think nomodeset may also do the same for each video driver so it may imply i915.modeset=0 anyway but I am not sure.........
  • Linux Kernel Freeze/Hang during boot on io scheduler cfq registered (default)


    You'll see the following and the boot process will freeze: io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) I have struggled with this issue on vari........
  • Ubuntu 10.04 Linux is still not ready for the Desktop world


    I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD. Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer). I'll........
  • OpenVZ iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Solution


    This error is annoying, in a Virtuozzo KB entry about this ip tables nat problem they say the kernel needs to be ugpraded: Symptoms The node runs 2.6.18-x kernel older than 2.6.18-028stab053.10. NAT module does not work in container, you get "can't initialize iptables table 'nat'" error: # iptables -t nat........
  • mencoder Linux CLI video editing how to encode video file into xvid and split by time into multiple parts


    Mencoder is great, you can throw anything at it, including video files from your camera and have it encode into xvid or almost any other format. In my case I took 640x480 video from my Canon and reduced the size by 1/3 with the options below (there are many other options that you can read about in the manual but I like to keep it simple). Mencoder Encode mencoder -ovc xvid -oac mp3lame -xvidencopts fixed_quant=4 -o ........
  • Linux Burn MP3 CD On the Fly using


    I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project. Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is. I just want to a directory that had the MP3's I wanted t........
  • Realtek r8169 1gbit/1000mbit NIC/Ethernet Goes Down/Halts on Large File Transfer/Heavy Network Usage


    This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason? [655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........
  • RAID 5 doomed in 2009?


    http://www.tomshardware.com/news/RAID-5-Doomed-2009,6525.html I found this article interesting, it basically says that with 2TB hard drives or larger sizes, you are more likely to encounter an unrecoverable read error. But is this just another Y2K doomsday? Don't HDD's have enough advanced hardware ECC error and read recovery to prevent this from happening? I'm almost tempted to build a 3 x........
  • FUSE/Curlftpfs mount ftp account as drive partition in Linux


    This is a great way to use your ftp server space, for example on your web hosting account (althoughI believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect. Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc.. Name curlftpfs - mount a ftp host as a local directory Synopsis........
  • XBOX 360 No Sound over HDMI Solution/Fix


    My XBOX's dashboard/firmware was from sometime in 2008 when I first bought the system. I mainly played using composite cables but at my brother in law's house we used HDMI. The very first time it worked, but then I bought some games that did some update and after that HDMI never worked. The symptoms besides having on sound is that your XBOX will show PC monitor resolutions but won't have any option to say you have a 720P or 1080P display, this means the XBOX firmware is fa........
  • Use rcconf to edit startup/init.d/init scripts on Debian/Ubuntu based distributions


    I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL. Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you. apt-get install rcconf Reading package lists... Done Building dependency tree Reading state information... Done........
  • Fix Slow 2D Graphics Xorg.conf Ubuntu/Debian/Mandriva Linux


    I'm using Ubuntu 8.04 but anyone using older kernels will find this may apply to them. My Intel graphics are very slow with the default Xorg settings but by using "EXA" acceleration, scrolling down windows of text becomes pretty snappy. Just edit /etc/X11/xorg.conf Section "Device" Identifier "Configured Video Device" &nb........
  • cPanel complaint - No Shared SSL! cPanel 11.25.0-R46156 - WHM 11.25.0 - X 3.9


    I've recently used CPanel on the admin side for the first time and have to say I hate it. Everything from the layout to the functionality screams "hackish". It just lacks so many common sense features and way of working. I was never 100% impressed with Plesk but the basics were definitely laid out and done in a sensible manner, even though it is made by a Russian company, they definitely thought about how to make a Control Panel. I have no idea why people........
  • mdadm can you downgrade the superblock?


    Why would you want to downgrade the superblock? Old mdadm verisons like mdadm 2.5.6 only use the 0.90 superblock/metadata and new versions use 1,1.0,1.1 and 1.2 superblocks by default. There are some annoying caveats with this, first of all the new superblocks (later than 0.90) CANNOT be read by GRUB, so you won't even be able to install GRUB. Even worse, old versions of mdadm CANNOT automatically detect arrays even if they were created with a new version of mdadm with th........
  • CPanel Use /scripts/easyapache to recompile Apache/PHP with different options


    I used the "Image Manipulation and Security Options" and let the script do the rest. /scripts/easyapache For whatever reason, doing a manual compile of PHPmyself broke everything and I've never seen that before, that's why I resorted to the cheat of easyapache.........
  • Why does mdadm have two sets of UUID's?


    Which one does the OS care about? blkid says the UUID is "787f1fa4-b010-4d77-a010-795b42884f56" while md insists its UUID is "4d96dd3b:deb5d555:7adb93cb:ce9182d9" When in doubt, do we assume the OS takes the one from blkid? /dev/md0: UUID="787f1fa4-b010-4d77-a010-795b42884f56" TYPE="ext3" [root@localhost ~]# mdadm -D /dev/md0 /dev/md0: Version : 0.90 &........
  • Check How Many Watts Your CPU,HDD,GPU, Fans Use - Power Consumption Tool


    www.antec.outervision.com/index.jsp I found that wattage/power consumption tool to be very useful, especially when you're worried that you're hitting the Power Supply's limit. You'll see very quickly that different CPU's, Graphics, Cards, HDDS use a wide range of energy. That tool can help you choose a build that won't stress or go over the maximum limits of your Power Supply.........
  • Debian 5.04 RAID 1 mdadm boot problem GRUB error


    I successfully created a single RAID 1 partition which includes /boot inside it and my root directory through the Debian installer. It said GRUB installed successfully but when I try booting the OS it seems GRUB can't read anything. When trying to boot from GRUB GRUB Loading stage 1.5. GRUB loading, please wait... Error 2 I get "Error 2" when trying to boot Debian. I also notice from a LiveCD that........
  • Centos 5.5 RAID 1 boot issue


    I installed 5.5 with a 300GB RAID 1 partition (boot is also on this partition). It booted up fine the first few times until after I used a Live CD and accessed the array, and it became named /dev/md127 for some reason. Now whenI boot into CentOS I get a kernel panic and different errors, once I got "invalid superblock", even though the array is fine (it didn't happen again, probably because I was sure to dismount and stop the mdadm array properly). Here's what........
  • Intel Corei5 750 Complaint/Onboard Video Issue on Intel H57 chipset not working


    Do you have an LGA1156 board and wonder why your onboard video isn't working? It's probably because there is no GPU integrated on the board itself, it is supposed to be on the CPU and new CPU's from Intel don't come with it! I was shocked to learn that you can buy a motherboard with onboard video which doesn't work. Inever knew it was being done or possible, but to make it worse the latest Core i5's don't have video on the die of the CPU. This means having on........
  • Gigabyte GA-H57M-USB3 Complaint Review/Comments


    I'm not impressed with this motherboard, I was impressed with my Gigabyte AM3 board which seems to work flawlessly. Everyone knows that the firmware is flawed, even though I have the F6, it still seems that the system doesn't reset properly or quickly enough. Another HUGE problem is that in most Linux kernels the NIC won't work (if you try 10 times by rebooting it might). I also notice that you need to power down for it to work. This board does not seem very com........
  • Compile PHP 5.3.2 on Centos 5 and CPanel/WHM because of error - Fatal error: Call to > undefined function imagecreatefromjpeg()


    This function and others may not work with the stock PHPinstall on Centos/CPanel: Fatal error: Call to > undefined function imagecreatefromjpeg() Even with libjpeg-devel installed it won't work because PHP was not compiled with jpeg support, so we have to do the dirty work ourselves :) Here is the command/yum's I did to install missing libraries for PHP that configure will complain about (yes it is a one by one process). yum install bzip2-........
  • Unixbench Score on Core i5 750 with OpenVZ Kernel vs Xen/Openvz


    This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel. OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!) # # # # # #&n........
  • chroot into an off-line Linux version using a LiveCD/USB


    It's not just as simple as running the chroot command, you need to ensure the /proc and /dev entries are passed through and populated to the chroot environment. Step 1 - Mount Your Off-lineOS mount /dev/sda1 /mnt Step 2 - Mount Proc mount -t proc none /mnt/proc Step 3 - Mount Dev Most guides will tell you to use this: mount -o bind /dev /mnt//dev but that doesn't work for some reason in many cases: mount: wron........
  • SSH Automatic/Passwordless Logon - Setup Public Key Encryption In Single Command


    This is a very simple solution, but most guides out there make you login twice (once to scp the key) and once to put the key in authorized_keys. There's no need for that. If you don't already have a ~/.ssh/id_rsa.pub just type "ssh-keygen -t rsa" and keep hitting enter until it's done :) Just use this code to easily enable passwordless login with SSHD key=`cat ~/.ssh/id_rsa.pub`;ssh user@192.168.5.25 "echo $key >> ~/.ssh/auth........
  • Choose Which GCC Version to compile with via CC environment variable.


    It's very common to have multiple GCC versions for different reasons, as annoying as it is. Some newer/older programs only compile properly or at all on specific versions. You can export the following variable CC: export CC=gcc-4.1 Replace gcc-4.1 with the filename of the gcc you want eg. gcc-99........
  • Asus Eee PC 1000HE Crashed/Need To Recover/Restore Windows? Easy Solution is Hitting F9


    I'm not a fan of Asus and won't be buying another because of having to fight Asus over a bogus warranty denial (it's a long story but they only replied about how to RMA my unit weeks later on the EXACT day the warranty expired). Anyway, it's just a matter of hitting F9 to do this, there's no need to worry about booting from USB or CD (unless of course you want a different OS eg. Windows XP Pro, Vista/7, or a flavor of Linux or Unix). Also remember that you need to fully/properl........
  • Linux 2.6.33.3 Kernel Error CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function b


    CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function body not available drivers/message/fusion/mptsas.c:462: sorry, unimplemented: called from here make[3]: *** [drivers/message/fusion/mptsas.o] Error 1 make[2]: *** [drivers/message/fusion] Error 2 mak........
  • rsync halted froze Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync)


    Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync) I was surprised to see this in my dmesg whenmy rsync backup suddenly stalled/stopped. This system has 3 gigs of RAM and lots of free memory so I don't understand what is happening. rsync invoked oom-killer: gfp_mask=0x200d2, order=0, oomkilladj=0 Pid: 7600, comm: rsync Not tainted 2.6.24.2 #83 [] oom_kill_pr........
  • Seagate Drive 500GB Drive Dying


    This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART. Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device........
  • Seagate 7200.11 firmware defect in 500GB, 1000GB (1TB) and 1500GB (1.5TB) Hard Drives


    Seagate Inventory/Firmware Check I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate. *Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate! Seagate Inventory/Firm........
  • nginx - the ultimate load balancer


    You can find it for free at http://nginx.org/ I find nginx is simpler to setup than pound (it's not hard but I found it unintuitive and annoying), it seemed to make some basic setups overly complicated with the config file syntax. nginx on the other hand is perfectly suited in everyway, it is even simpler to setup and seems to be the most stable and most efficient any load balancer. I would go as far as to say that a good nginx setup is more relia........
  • email2fax and Asterisk to do eFaxing


    It's basically free bash shell script available from: http://wpkg.org/email2fax/index.php/Main_Page Make sure you have the required tools: libtiff ghostscript mpack/munpack Where you can e-mail your Asterisk box and it will fax it to the phone number in the subject line. The good news ends there, it is fairly undocumented and buggy. Take for example how the documentation mentions you can invoke from the com........
  • tar gzip: stdout: File too large - Error Size Limit on Large file > 17GB


    The folder I was trying to archive is about 72GB, but much like rsync at about 17GB it chokes because of the filesize. What's with so many common and essential Linux tools having such limitations? I guess it is likely that the authors never wrote their code with the idea that files would be so large but it's still very annoying. It's important to stay on top of these limitations on production servers because I didn't realize what happened until I checked the file with "........
  • XMPP Chat Protocol using Jabber - Guide Tutorial Setup Linux Chat Server


    In Debian based distros: apt-get install jabber Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: fakeroot dkms Use 'apt-get autoremove' to remove them. The following extra packages will be installed: jabber-common The following NEW packag........
  • Picking an FTPD (vsftpd) Server in Linux Centos/Debian


    I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find. yum search ftp Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: ftp-stud.fht-esslingen.de * base: mirrors.netdna.com * updates: updates.interworx.info * addons: yum.singlehop.com * extras: mirrors.netdna.com rpmforge........
  • OpenVZ backup container to a single file while it's running using "vzdump"


    Proxmox has made this free utility to backup running OpenVZ containers. It's a great program which is actually just a PERL script but gets the job done. This program is not 100% required because all it really does is cp -a from your container's path as far as I know but it is still good to have uniformity to how you backup your containers. For RPM distros such as Centos/RHEL/Fedora etc.. download and install this: wget http://www.proxmox.com/cms_proxm........
  • Windows XP How To Edit/Find Recent Documents and "File -> New" Templates to create New Word Document, Text/Notepad, Excel etc...


    All you have to do is browse to: C:Documents & SettingsYourUserName and you'll see the following: Inside "My Recent Documents" are of course shortcuts to the most recent documents you opened Inside "SendTo" is your sendto, you could edit that to Send a file to a network destination, your Flash Drive........
  • Compaq V2405CA Laptop - Unixbench Performance Test


    Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics. # # # # # # # ##### ###### # # #### # # # # ## # # # #&nb........
  • heartbeat is stopped for some reason


    heartbeat is stopped for some reason Anyway hnode2 was active and the services are running fine but I see heartbeat has been stopped somehow. Here is the last log I see of heartbeat: [quote:23c84415f5] Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: MSG stats: 9/1762471 ms age 0 [pid16738/MST_CONTROL] Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: cl_malloc stats: 716/51784021 152624/74519 [pid16738/MST_CONTROL] Sep 9 17:15:32........
  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
  • Photoshop Tutorials


    Photoshop Tutorialshttp://www.lyzrdstomp.com/index.php?option=com_content&task=blogcategory&id=73&Itemid=86........
  • SSH automatic login without password


    SSH automatic login without passwordlocal> ssh-keygen -t rsa -f .ssh/id_rsa -t is the encryption type -f tells where to store the public/private key pairs. In this case, the .ssh directory on home is being used A password will be asked; leave this part blank, just pressing Now, go the .ssh directory, and you will find two new files: id_dsa and id_dsa.pub. The last one is the public part. Now, copy the public key to the serv........
  • Asterisk FreeBSD compile problems


    Asterisk FreeBSD compile problemsI couldn't get it to compile without using the following options at compile time: [b:b7d672ee28] make install WITHOUT_ZAPTEL=YES WITHOUT_MYSQL=YES WITHOUT_FAX=YES WITHOUT_ODBC=YES WITHOUT_H323=YES[/b:b7d672ee28]Some problems you might have with copying over your Linux config files to FreeBSD is different paths. [b:f044931f41]For example the etc path for Asterisk on BSD will now be:[/b:f044931f41] [qu........
  • Nice General Linux RAID 1 Guide


    Nice General Linux RAID 1 GuideFull examples/tutorials that should work for any Linux system using GRUB or LILO as the boot loader. This is the only tutorial I've seen that clearly shows how you can convert an existing non-RAID system to software RAID1 remotely, without ever having to be at the computer. This is important for people who co-locate or rent dedicated servers that they may not have physical access to in a timely manner. https://alioth.debia........
  • Heredoc warnings


    Heredoc warningsExample $somevariable = ........
  • How to extract files from RPM & SRPM files


    How to extract files from RPM & SRPM filesmkdir any_directory cd any_directory rpm2cpio /location/of/package.src.rpm | cpio -d -i This will extract all files, I find it especially useful if you want to manually compile the kernel source from the srpm........
  • Centos 4.3 x64 & VMWare Server Beta


    Centos 4.3 x64 & VMWare Server Beta[code:1:6d0b2c8c2f] The correct version of one or more libraries needed to run VMware Server may be missing. This is the output of ldd /usr/bin/vmware: linux-gate.so.1 => (0xffffe000) libm.so.6 => /lib/tls/libm.so.6 (0xf7fbd000) libdl.so.2 => /lib/libdl.so.2 (0xf7fb9000) libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fa7000) libX11.so.6 => not f........
  • Upgrade Release Kernel Tips


    Upgrade Release Kernel TipsThis is for CentOS 3.1 to 3.8 but the methodology will apply everywhere. I ran into a problem first of all with a non-booting system after running #yum update centos-release It took me to 3.8 and upgraded all the other packages [b:7e931c835d]BUT[/b:7e931c835d] because of some stupid flags enabled in /etc/yum.conf the KERNEL WASN'T UPGRADED SO AFTER BOOTING, WELL IT DIDN'T BOOT OF COURSE :) H........
  • Need identd for port 113 ? Install authd


    Need identd for port 113 ? Install authdyum install authd Happy identing :)Actually it's not that simple. It installs as an "xinetd" service and is disabled and turned off by deafult. To enable it run: [code:1:8c94df8319] chkconfig --level 3 auth on service xinetd restart [/code:1:8c94df8319] This will set identd aka authd to start by default. service xinetd resta........
  • /usr/bin/ld: cannot open crt1.o: No such file or directory


    /usr/bin/ld: cannot open crt1.o: No such file or directory[quote:812bec9db7]/usr/bin/ld: cannot open crt1.o: No such file or directory collect2: ld returned 1 exit status[/quote:812bec9db7] This is annoying and in my case it happened on Centos AMD 64 when compiling a 32bit program with GCC. Install glibc-devel.i386 (make sure you get the i386 version and not the native 64 bit version which is likely already installed). The joys of 3........
  • Roxio/Sonic complaints - No verification of burnt ISO Image


    Roxio/Sonic complaints - No verification of burnt ISO ImageThe only thing Nero does better is that it has the option to verify the data written from an ISO/CD Image! Why can't all burning utilities have this feature?........
  • Updating yum repos for DAG /etc/yum.repos.d


    Updating yum repos for DAG /etc/yum.repos.dIn /etc/yum.repos.d [quote:96456b2ab9]Create any file such as "CentOS-Dag.repo" in /etc/yum.repos.d[/quote:96456b2ab9] Add the following to the above file: [code:1:96456b2ab9] [dag] name=Dag RPM Repository For Red Hat Enterprise Linux baseurl=http://dag.atrpms.net/redhat/el$releasever/en/$basearch/dag/ http://dag.freshrpms.net/redhat/e........
  • Xorg fonts missing Xorg.0.log


    Xorg fonts missing Xorg.0.logThis happened on a PCBSD installation but it could happen on any Unix/Linux Xorg installation: If the text on your screen is too small and you're running at a high resolution if you do a [code:1:04ca0d3455]cat /var/log/Xorg.0.log | more [/code:1:04ca0d3455] You'll see a bunch of fonts missing, specifically the 75dpi and 100dpi ones that you really need :) (WW) The directory "/usr/X11........
  • Crontab Tutorial - Tips & Shortcuts


    Crontab Tutorial - Tips & Shortcuts*/5 * * * * /command The above is an example of a command that runs every 5 minutes. Normally instead if the "*/5" you'd have to type "5,10,15,20,25,30,35,40,45,50,55" etc... You can use it to run a program every 5 days, 5 months 5 years etc...Crontab run one a day at a certain time[code:1:7a3bd32dfa]0 1 * * * /home/backupguy/databackup.sh[/code:1:7a3bd32dfa]........
  • How to compile in Windows/DOS


    How to compile in Windows/DOSMingW is a free compiler project so start here: http://www.mingw.org/download.shtml#hdr2 I downloaded the core GCC compiler: http://prdownloads.sf.net/mingw/gcc-core-3.4.2-20040916-1.tar.gz?download But it's missing even the standard C runtime libraries like "stdio.h"! You may also need to add environment variables from the DOS command line. Here is a simpl........
  • The New Chips on the Block


    The New Chips on the BlockThe New Chips on the Block By Bruce Gain Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html 02:00 AM Jun. 13, 2005 PT We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........
  • Intel's Finnish Fetish


    Intel's Finnish FetishIntel's Finnish Fetish By Dave Mock June 13, 2005 Chipmaker Intel (NASDAQ: INTC) has successfully topped the personal computer market for decades. Breaking into related areas such as communications has been much difficult for the world's largest semiconductor maker. But a new partnership with Nokia (NYSE: NOK) could help to change that. Intel's forays into cellular-phone and home-entertaiment-device chips have........
  • Intruder detection device uses behavioural analysis


    Intruder detection device uses behavioural analysisIntruder detection device uses behavioural analysis by Antony Savvas Monday 13 June 2005 Symantec is introducing a new intrusion detection product that uses behavioural analysis to block potential attacks on enterprise networks. The new Critical System Protection 4.5 system uses technology that Symantec acquired through last years purchase of Platform Logic. It is designed to protect deskt........
  • BMP is the best FreeBSD/Unix MP3 player I can find


    BMP is the best FreeBSD/Unix MP3 player I can findSeems like a better written XMMS that uses Winamp skins http://www.sosdg.org/~larne/w/BMP_Homepage........
  • Tutorials on port upgrades


    Tutorials on port upgradesnice to see a FreeBSD forum http://www.redantigua.com/portupgrade.html http://www.onlamp.com/pub/a/bsd/2003/08/28/FreeBSD_Basics.html?page=2........
  • MySQL Server 3.23 won't start after switching from 4.1


    MySQL Server 3.23 won't start after switching from 4.1I was using a 4.1 alpha version of mysql-server and some how version 3.23 of the client and 4.1 of the client were also both installed! So I forced uninstalled everything because after trying and trying even though MySQL server was using the short 16byte password authentication I got some other errors. After trying with the ports and having it fail because I had existing database data I force installe........
  • Backup Shell Script


    Backup Shell Script[quote:aaa4b0b165]#!/bin/sh date=`date -I` mysqldump --all-databases | gzip > /var/backup/backup-$date.sql.gz [/quote:aaa4b0b165] Something like that could be useful as a cronjob to locally or remotely backup your databases........
  • PHP imagecreate() not found but compiled with GD


    PHP imagecreate() not found but compiled with GDHere is what I get: [code:1:be41bc7717] Fatal error: Call to undefined function: imagejpeg() in image.php on line 56 [/code:1:be41bc7717] I am positive it is compiled with GD so I don't get the errorI need to install the linux-jpeg package then I need to recompil........
  • Cool SNMP tutorial/info


    Cool SNMP tutorial/infohttp://www.dpstele.com/layers/l2/snmp_l2_tut_part1.html........
  • Helpful IPFW Examples


    Helpful IPFW ExamplesSomeone's real life examples: http://lists.freebsd.org/pipermail/freebsd-security/2004-July/002181.html Or you can try the FreeBSD Handbook guide: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/firewalls-ipfw.html........
  • Great FreeBSD Security DOS tutorial


    Great FreeBSD Security DOS tutorialhttp://www.onlamp.com/pub/a/bsd/2004/06/24/anti_dos.html........
  • RAID1 using Gmirror Tutorial


    RAID1 using Gmirror Tutorialhttp://www.onlamp.com/pub/a/bsd/2005/11/10/FreeBSD_Basics.html........
  • Package management


    Package managementIf you're like me and often like using an older version you'll need to know this. Since all 5.x versions no longer have packages of their own you'll have to use the 5-stable The best way is to set the [b:d5e8972240]packagesite environment variable[/b:d5e8972240] like so in your [b:d5e8972240].profile [/b:d5e8972240]file [quote:d5e8972240]vi /etc/.profile[/quote:d5e8972240] Add this: [code:1:d5e897224........
  • CVSUp the Easy Way


    CVSUp the Easy WayIf you're reading this you probably have never used CVSUp or don't know how. CVSUp can be used for two things or just one if you prefer. *Keeping your kernel up to date *Keeping your port list up to date Start by editing the following file in: [b:76928b387d]vi /usr/share/examples/cvsup/cvs-upfile[/b:76928b387d] It can be quite overwhelming with all the crazy options. Basically there are only 3........
  • camera


    camerawhich is a better digital cam to get a sony or a canonHey there, I've only had an experience with the Sony, not the Canon. I think Sony uses the same lense as Canon from what I hear :). Sony is damn expensive and there's no benefit over the Canon really. I don't know if Canon is the best, but I would pick them over the Sony. You may want to specify which models you're comparing.........
  • Use Mozilla Firefox, not Internet Explorer - You'll be glad!


    Use Mozilla Firefox, not Internet Explorer - You'll be glad!Hey guys, I just thought I'd recommend that everyone switch to Mozilla Firefox as their web browser. You can find it at http://mozilla.org It is free and it is much better than IE. It has a built-in popup blocker which works great and most importantly, it doesn't have a million critical security flaws which could compromise your security such as passwords for on-line banking etc..........
  • NEC ND-3500A is great!


    NEC ND-3500A is great!I just picked up an NEC 3500A a few weeks ago and I love it. It is a great all in-one optical drive solution. It can burn DVD/+R-R at up 16x, read at 16x and rewrite at 4x and CD-R at up to 48x! Not bad, but the impotant part is that it delivers consistent high quality burns and the drive is as quiet as I could ask it to be. It's also convenient that it has a lot of hacked firmware for overspeeding of........
  • Basic Port Listing


    Basic Port ListingHopefully someone finds this useful or at least interesting. http://www.sans.org/top20/#u9 Name Port Protocol Description Small services ........
  • Telus Begins Enforcing Bandwidth Caps


    Telus Begins Enforcing Bandwidth CapsIt appears Telus has begun to send e-mails out and is planning on enforcing bandwidth caps of only 10gigs/month for their 1.5mbit plan and 20gigs/month for 2.5mbit The state of Canadian ISPs is horrible :( In the east coast, Bell Sympatico will allow you to have unlimited bandwidth and even Aliant will and they have 3mbit for a much more affordable price than our 2.5mbit on Telus. Telus needs to get wit........
  • Wireless/xmit power - DD-WRT v23 SP2 (09/15/06) std - build 3932 Linksys WRT54G/GL/GS


    I played around with xmit power (how much power in mW) to see if I could increase the range and signal strength. Idon't think this Linksys WRT54G's strength is the wireless, it seems to have poor signal quality and transfer rates all around. Ithink part of the problem is also that there are several wireless networks around my house that could be interfering and the walls are thick here. Anyaway, moving on now :) The default is 28mW and I increased it to........
  • gnuCash - Alternative to Quickbooks/Quicken and other COTS accounting software.


    gnuCash is available for all main platforms, Linux/Unix, MacOS (FreeBSD anyway), and Windows. You can download gnuCash free from here. It does seem to be fairly full featured and somewhat straight forward, but like so many programs it is missing a few key features or things don't work quite right. It doesn't support importation of CSV files, which is a big minus. And the developers rather than wanting to add support have just dec........
  • Linux Kernel Error (2.6.33.1) BUG: Bad page state in process swapper - Keeps rebooting - initramfs bug


    *This is a bug with initramfs support, all kernels after around 2.6.27.54 suffer from this problem. If you try to include initramfs into your kernel (I mean actually building your binaries into the kernel) this will always happen. Obviously some code has changed in recent kernels that is present in all new kernels, it makes it impossible to boot I've tried the latest 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36, 2.6.37, 2.6.38 kernels and they all do this. I found one bug re........
  • Linux Kernel Compilation (Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support ) Error - drivers/net/igb/igb_main.c: In function `igb_up': make[3]: *** [drivers/net/igb/igb_main.o] Error 1


    Linux Kernel v2.6.30.3 102220 blocks CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-x86 CALL scripts/checksyscalls.sh CHK include/linux/compile.h CC drivers/net/igb/igb_main.o drivers/net/igb/igb_main.c: In function `igb_up':........
  • Enable/Disable PHP Warnings/Logs and Errors from .htaccess with Apache


    Put what you see below into your .htaccessand it will enable errors and notices. (change on to off and 1 to 0 to disable though) php_flag display_startup_errors on php_flag display_errors on php_flag html_errors on Now you'll be able to see errors and notices but this should really only be used for debugging purposes and only temporarily as it can be a security issue since errors can reveal information you wouldn't want hacker........
  • Process/Parse PHP from HTML files using .htaccess and allowoverride


    RemoveHandler .html .htmAddType application/x-httpd-php .php .htm .html Just add the above into the .htaccess file for your website. Also remember that you need to be allowed to override the Apache and this should go into the vhost for your site as shown below: # you need the AllowOverride otherwise .htaccess directives will be ignoredOptions FollowSymLinksAllowO........
  • MySQL Error "ERROR 1045 (28000): Access denied for user"


    This happened with a select statement which writes the result to an external file. I didn't remember the privilege "FILE" must be granted on *.* for this to work successfully, it wasn't actually an authentication issue as it implies since I was already in the SQL prompt and doing the query. SELECT some_id FROM sometable INTO OUTFILE '/tmp/result.txt'........
  • Mysqld Solution - Can't init databases /usr/libexec/mysqld: Can't read dir of '/tmp/' (Errcode: 13) /usr/libexec/mysqld: Can't create/write to file '/tmp/ibyP1qUC' (Errcode: 13) 100215 7:02:24 InnoDB: Error: unable to create temporary file; errno


    100215 07:02:24 mysqld started /usr/libexec/mysqld: Can't read dir of '/tmp/' (Errcode: 13) /usr/libexec/mysqld: Can't create/write to file '/tmp/ibyP1qUC' (Errcode: 13) 100215 7:02:24 InnoDB: Error: unable to create temporary file; errno: 13 100215 7:02:24 [ERROR] Can't init databases 100215 7:02:24 [ERROR] Aborting 100215 7:02:24 [Note] /usr/libexec/mysqld: Shutdown complete 100215 07:02:........
  • Adventures in pre-paid SIM Cards and data GPRS/Edge/3G in China with China Mobile in Shenzhen, Guangzhou, Shanghai, Beijing and other cities


    This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far: You can purchase an "M-Zone" China Mobile pre-paid SIMCard from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all. At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........
  • iPhone Enable Tethering Manually Update ipcc Carrier Settings/Update via SSH


    Everyone says there is a "manual" way of doing it and then they tell you to use iTunes, but if you're like me, you're travelling on business in a foreign country and your laptop does not have iTunes and you don't have a way of getting it and/or don't want it. For this example I'm using the provider "du" in Dubai, UAE (United Arab Emirates) but this method works for virtually all providers. The requirements in this case to truly "manually update........
  • How To Enable 3rd/third party packages in RHEL/Redhat/Centos 4/5 Linux via RPMForge


    It's a bit of a pain that many basic third party tools that aren't put of the main Centos/RHEL repositories are not available unless you compile them or install the RPMForge Repo. *Updated 08/29 with new download location changed from apt.sw.be to rpmforge.sw.be Here's a quick, simple/cut&paste way to do it: wget http://rpmforge.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.i386.rpm rpm -i rpmforge........
  • SAMBA/SMB Share "Write" Access without Delete


    There is a nice mode that Samba supports which you can add to smb.conf create mode=555 This way users can create and write files/directories without deleting (except I believe dirs can be deleted but only if there are no files inside). It's too bad that Linux does not have built-in "write"/"delete" privileges and is something that even Windows 98 can trump.........
  • GRUB "Error 2: Bad file or directory type" 0.97 won


    You can see the problem below, GRUB recognizes my hard drive and sees the partitions but cannot access them. This is from the GRUB boot disc I'm using. What happened is that I had some power issues causing this system's power to be interrupted several times and basically an on/off on/off situation. The system won't boot, I just get a flashing cursor and no message or error from GRUB. Obviously the problem is that my MBR seems corrupt or some other issue. My........
  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon - Updated with GlusterFS 2.0.8 & Optimized Client Config


    The results are still not flattering and are nothing close to native performance. Unless GlusterFS has a "DRBD-like" option to delay writes over the network and to only read from the client side, I don't see how performance can ever improve much more. After doing some client optimizations Iadded more to the score: Start Benchmark Run: Sun Nov 29 00:37:44 PST 2009 00:37:44 up 3 min, 1 user, load average: 0.01........
  • Clustered/Distributed Network Filesystems, Which Ones live up to the hype?


    I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems. DRBD I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........
  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon - Updated with GlusterFS 2.0.8


    You might remember my original GluserFS/OpenVZ benchmark which produced a horrible 29.8 This is the exact same system, but using the latest 2.0.8 (with some small files patch which speeds up performance) you can see it is about 25% faster. I also haven't tuned my config files at all, but there are some settings that should increase performance on small files which I believe i........
  • Tyan S2735-8M Maximum Hard Drive Limit/Not Working/Doesn't work with 1TB 1000GB hard drives


    Inever saved any of the logs, but basically no matter what OS (Linux)I used, I could not get my 1000GB hard drive to work (Seagate SATA). The BIOS recognizes the drive and fdisk -l shows the hard drive as it should. The tricky thing is that different OS's will give you different results, but don't be fooled. You can't use these larger drives for long. Iwas getting all kinds of seek/IOerrors and also messages that the port could not be read.........
  • Tyan S2735-8M motherboard/Rackable Systems 1u Server 100mbit NIC not working even when enabled in the BIOS


    Itried everything Icould think of, and of course even with the NIC enabled in the BIOS nothing was working. The light would flash when you plugin the cable for a second, but that's all. Due to another issue I'm about to post about (server is not compatible with 1TB/1000Gig Hard Drives), I updated the BIOS. I didn't even know the 100mbit NICs were not working untilI decided I should test each NIC one by one. Inoticed that only 1 server out of........
  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon


    This is very disappointing since GlusterFS markets itself as a solution to deploy VPS servers on. On the HNitself I get a Unixbench of about 360. I'm also using an SSH tunnel to secure the communications, but even before that, things seemed very slow. # # # # # # # #####&n........
  • Linux/Unix Open SSH Login Without Password Key Exchange including Debian, Redhat, Fedora, Ubuntu, BSD etc..


    In those 4 simple commands you can setup mutual key exchange between two sshservers by using a single login shell session and single window. *Just change the IP address examples of (10.10.0.2) to the target of your mutual key exchange. It doesn't matter if the server is on a LANor WAN(well unless the server is behind a firewall and you cannot SSHinto it).........
  • Have an OpenVZ VPS/Linux Virtual Private Server and nothing works right?


    A VPS Server I had just wasn't working right, code that I migrated there just wasn't working. For example, it kept telling me the connection to the database was unsuccessful, halfway through iterating through results it already had. Then I realized it wasn't my code. Ichecked my /proc/user_beancounters and found this: cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt........
  • Linux How to Search for text within any file using Linux/Unix - Use GREP


    It's actually very simple and "grep" makes it as easy as possible. I'll outline a few common scenarios and provide some examples. Say you want to search ALLfiles within the current directory (and inside/deeper) for the text "phpinfo()" grep -R "phpinfo()" * If you want to search only certain files such as only .txt you would do this instead: grep -R "phpinfo()" *.txt As you ca........
  • MySQL Restoring And Dumping/Backing UP MySQL Data/Tables/Databases


    Backing MySQL Databases Backing Up/Dumping All Mysql Databases To A Single File mysqldump --all-databases -u admin -p > allmysqldatabases.sql The "-all-databases" clause is pretty obvious isn't it? It means that it will backup all databases. The "-u admin" means login using the user "admin", if you h........
  • How To Save iptables firewall rules Centos/Redhat/Fedora Linux


    This is something that annoys a lot of people, fortunately the Redhat style OS's are the most simple in this respect. I disagree that Debian's way makes sense, it is more of a hackish approach in how they implement iptables. Anyway, for those who are using Redhat/Centos style OS's it is very simple. Set your rules from the shell/command prompt and to save the iptables firewall rules so they are remember/loaded on boot just run this command: service iptables........
  • iPhone Create Silent/Free Custom Ringtone jailbroken/jailbreak iPhone


    As shown below you can find ringtones in the "/private/var/stash/Ringones*" directory of your iPhone. Different reports have said that the .m4r format is really an MP4 file and some have said AAC and some also say "it's the same as the M4A" format. Whatever the case is, one easy way is to install the silent theme from Cydia and copy that into your ringtones directory. /private/var/stash/Ringtones.sh7cLj root# ls Alarm.m4r ........
  • iPhone Complaint Lock/Standby Disrupts WiFi and uses 3G instead


    Has Apple tried to give a golden egg to the cell phone companies? Has anyone noticed that if you set your lock time to x minutes, the phone doesn't just lock, it goes into standby. When it does this, any WiFi connection you have gets dropped and all push/data functions such as e-mail checking are done through the 3G network. There is no way to change this feature and functionality and it's very annoying, especially if you are downloading something or loading files over the........
  • How to solve the iPhone 15 minute POP/IMAP checking delay option with virtual push


    You need to jailbreak your phone and inside Cydia you'll find "PushMod" which will allow you to set your mail check time to 1 minute instead of 15-minutes. This is a great mod and has saved me a lot of stress and frustration, the lack of Blackberry style "free push service" makes iPhone less attractive, but this solves that. Apple needs to make mobileme free and have a Blackberry style chat network to compete, I'm not willing to pay for something Blackberry........
  • Why Apple should thank the jailbreakers and not patch/stop the jailbreaking exploits


    First of all, the iPhone is crippled in many ways, but most of my complaints about functionality have been addressed through the jailbreak, Ican run apps in the background of my choosing, I can install a terminal, acccess my phone through SSH and SCP and so much more. It even addresses the 15 minute e-mail problem, I installed a program called "PushMod" and now set the checking time to just 1 minute. Apple should really thank the developers for this gift, it ma........
  • iPhone Backgrounder Adds True and Real iPhone multitasking on jailbroken phones


    Apple crippled the iPhone by not allowing multi-tasking of the non-primary apps. I use SSH a lot and I don't want to close my session just to check my e-mail, etc, now an app found in Cydia called "Backgrounder" allows just that. Although it's not perfect, we installed the correct one for "3.x" iPhones and hit "Reload SpringBoard" and the hour/circle glass has just been going for minutes. It seems like it installed fine even with the crash t........
  • iPhone 3GS 32GB "Harsh Review"


    Yes, Iadmit I finally got bitten by the hype as much as I can usually see through it all. Keep in mind this review is of the "stock" phone, no jailbreaking yet which is what really unleashes the customizability and whyI bought iPhone. I had better things to say about this phone before buying it, and it is a great phone, perhaps the best on the market by far, if not because of the Mac OS port onto the iPhone and all the apps, etc, etc. With that said........
  • Weird characters in Linux putty shell


    Iused to get all kinds of weird annoying characters like "" during compilation with gcc especially. example: dmg2img.c:456: error: BZ_OK undeclared (first use in this function) dmg2img.c:471: warning: implicit declaration of function BZ2_bzCompressEnd dmg2img.c:482: warning: implicit declaration of function BZ2_bzDecompress dmg2img.c:484: error: BZ_PARAM_ERROR undecl........
  • Using a Mac OSX DMG Image in Windows and Converting to Standard ISO Format use dmg2iso


    The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso I'll only cover theLinux version although the Windows pre-built binary works the same way. Download dmg2iso here for free (from the author's website) It's just silly and doesn't make sense that Ubuntu doe........
  • Apple iPhone 3GS and predecessors are leading a revolution


    As much of a computer nerd as Iam, I'm usually a late adopter to technology for a few reasons. Ifeel most new hyped technologies and electronics are mainly fads, and I'm also cheap. Adopting later means you avoid the bugs, kinks and most importantly pay the lowest price, that's me being cheap again :) I never read much about the iPhone but Isaw all the hype around it and until recently I wasn't a big fan of anything Apple until a few years ago I realize........
  • Nokia N97 review, feedback and complaints


    I've had an old Blackberry for a few years and I was ready to spend some serious cash on a nice Nokia. I love the idea of the Linux based Symbian S60 OS, so I was looking at phones like the E63, E71 (both are basically the same, at least CPU/screensize although E71 is thinner, has a 3MP camera, has GPS, and has dedicated buttons to adjust the volume). Then Iheard about the N97 and what a revolution it was supposed to be and it was even compared to iPhone. To........
  • RTL8111/8168B R8169 Gigabit Link slow speeds


    This is the Intel Atom 330 motherboard with integrated Realtek Gigabit NIC (Intel Desktop Board D945GCLF2 Motherboard W/ Atom 330 1.6 GHz Dual Core Processor - Mini-ITX) I cannot achieve more than 15 MB/s, even doing a local transfer through eth0 to it's own IP. 100% 95MB 15.9MB/s 00:06 So this is not a cabling, switch or hardware issue, it seems like a driver or chipset limitation problem. Here is my........
  • SSH Slow Login even with SSHD UseDNS no parameter


    Icouldn't understand why on one system it took a few minutes to get the SSHlogin prompt when connecting to other systems. The other systems all had the UseDNS parameter set to no, which almost always resolves the login prompt delay. The reason is Ubuntu and perhaps Debian and other distributions /etc/nsswitch.conf file Edit yours to have the "hosts" line like so (notice that files and dns are the primary resolution choice........
  • SSH Server Slow/Lagged/Delayed Login Response


    This is really something the SSHServer developers should consider. The cause of this annoyance is because of failed DNS lookups on your IPaddress, which is especially common for many dedicated/col-located servers and also computers on internal NAT/private networks. The chances are this is the cause of your SSHSlow/Delayed Login problems. The easy solution to SSH Login Problems Edit /etc/ssh/sshd_config Add this line to disable r........
  • OCFS2 crash


    When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it. More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things. Output of /var/log/messages for OCFS2 Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........
  • Samba SMB Error - Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD


    Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD That happens when trying to use smbclient to connect to a share. The weird thing is that I can authnenticate just fine from Windows XP. It is partially my mistake, I forgot this share does have a password. I've tried authenticating with the correct user and also with "Guest" because this works in Windows. In Linux I ........
  • Viewing and Connecting to an SMB Samba Share on Windows/Linux/Unix


    This will give you the basic info needed to browse and connect to Samba shares from the command line. From the GUI of Gnome or KDE etc, it is pretty standard and straight forward. However, I've found very little guides on how to do it from the command line and if you're like me, a nerd who prefers command line for its simplicity and for remote use, this is the way to go. First get a list of all the Samba/SMB shares on the target. smbclient -L hostname........
  • Rackable Systems and their Microslice Clustered 1U Servers


    Ithink there has been a lot of negative press towards Rackable Systems. We will give their new solution credit that it is marketed very well, and comes prepackaged and ready to go. But let's cut through the hype of both sides, the people who love this concept and the people who hate it. What Rackable Systems have done is a first, to minimize space, power and costs into small servers. This is great, and many companies have already built their own servers based........
  • SSH Problem User username from 127.0.0.1 not allowed because not listed in AllowUsers


    User username from 127.0.0.1 not allowed because not listed in AllowUsers What's going on? The user was created properly, it has been defined as having a shell entry and the entry for /etc/passwd and /etc/shadow is set just fine. This is a new and very smart/secure feature of SSHD. It is simple and yet effective, but also very annoying if you didn't know about it being implemented and that hand editing of /etc/ssh/sshd_config is required to allow a newly add........
  • LAME MP3 Encoder Segmentation Faults


    This happened on one of my Ubuntu machines where Igot some kind of segfault on line 21 from LAME at random while encoding MP3s (a second try is fine usually). I've read that it's best to compile it from source and that has solved most issues for people. Here is my preferred configure line: ./configure --enable-mp3x --with-fileio=lame --enable-debug --with-vorbis Even with that I got a different error this tim........
  • Google sued by "SearchKing"


    http://searchenginewatch.com/2165111 This was an interesting article and people should be wary of Google's power. Google's policies and actions against competitors borders on anti-trust, far worse than Microsoft. They are doing the right thing for all of us, Google says selling advertising and links is bad for search engines, yet they don't penalize sites who use AdSense. ........
  • Latest Articles

  • Cloned VM/Server/Computer in Linux won't boot and goes to initramfs busybox Solution
  • How To Add Windows 7 8 10 11 to GRUB Boot List Dual Booting
  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile
  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial
  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif
  • Linux Debian Mint Ubuntu Bridge br0 gets random IP
  • redis requirements
  • How to kill a docker swarm
  • docker swarm silly issues
  • isc-dhcp-server dhcpd how to get longer lease
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian
  • zfs and LUKS how to recover in Linux
  • [error] (28)No space left on device: Cannot create SSLMutex Apache Solution Linux CentOS Ubuntu Debian Mint
  • Save money on bandwidth by disabling reflective rpc queries in Linux CentOS RHEL Ubuntu Debian
  • How to access a disk with bad superblock Linux Ubuntu Debian Redhat CentOS ext3 ext4
  • ImageMagick error convert solution - convert-im6.q16: cache resources exhausted
  • PTY allocation request failed on channel 0 solution
  • docker error not supported as upperdir failed to start daemon: error initializing graphdriver: driver not supported
  • Migrated Linux Ubuntu Mint not starting services due to broken /var/run and dbus - Failed to connect to bus: No such file or directory solution