• How to configure OpenDKIM on Linux with Postfix and setup bind zonefile


    This guide assumes you have a working Postfix server and want it to sign with DKIM. There are a few things we have to understand to make all of this work though, which require you to be familiar with DNS as well. 1.) Install OpenDKIM apt install opendkim systemctl enable opendkim 2.) Edit /etc/opendkim.conf Syslog yes SyslogSuccess yes Mode&nbs........
  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial


    apt install tftpd-hpa #change TFTP_ADDRESS to by setting address to 192.168.1.1:69 or the IP you need, otherwise it will listen on all IPs and interfaces which could be a security risk. # edit /etc/default/tftpd-hpa TFTP_USERNAME="tftp" TFTP_DIRECTORY="/srv/tftp" TFTP_ADDRESS="192.168.1.1:69" TFTP_OPTIONS="--secure"........
  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.


    This sometimes happens when trying to install the EFIversion of grub to a device when you are booted into Legacy/MBR mode. It doesn't seem to occur on all machines, but some and seems somewhat BIOS dependent. grub-install --target=x86_64-efi /dev/sda Installing for x86_64-efi platform. grub-install.real: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image.. grub-install.real: warning: Couldn't find physica........
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif


    [Wed Nov 01 18:47:08 2023] [error] Unable to configure verify locations for client authentication [Wed Nov 01 18:47:08 2023] [error] SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line [Wed Nov 01 18:47:08 2023] [error] SSL Library Error: 185090057 error:0B084009:x509 certificate routines:X509_load_cert_crl_file:PEM lib It actually gives us a good clue that at last one component of our cert is invalid/improperl........
  • Linux Debian Mint Ubuntu Bridge br0 gets random IP


    This can break things easily in remove environments where it was normally easy to convert a normal eth0 to a bridge under br0, and that bridge would normally have the same MAC address by default, which is desirable for most situations. In Debian 11 this is different for some reason now. https://unix.stackexchange.com/questions/681013/bridge-gets-random-mac-........
  • redis requirements


    sysctl vm.overcommit_memory=1 echo never > /sys/kernel/mm/transparent_hugepage/enabled echo 511 > /proc/sys/net/core/somaxconn 1:M 26 Nov 2023 21:34:33.840 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128. 1:M 26 Nov 2023 21:34:33.840 # Server initialized 1:M 26 Nov 2023 21:34:33.840 # WARNING overcommit_memory is set to 0! Background sa........
  • How to kill a docker swarm


    Assign way more replicas than you have of memory on all nodes and watch the Swarm crash which can easily reproduce in a small VMfor testing. root@Deb11Docker01:~# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAM........
  • docker swarm silly issues


    The error below can be caused by a gateway that is unpingable: docker swarm join --token SWMTKN-1-1kogg8da68gtb1j7ezaddowyy9s0an5s9tue758o20k18liskw-5h3f61hrrmv3u6agshvbtcklf 172.16.1.80:2377 Error response from daemon: manager stopped: can't initialize raft node: rpc error: code = Unknown desc = could not connect to prospective new cluster member using its advertised address: rpc error: code = DeadlineExceeded desc = context deadline exceeded........
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian


    This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525. Then nvidia-modeset goes to 100% There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines. https://forums.de........
  • zfs and LUKS how to recover in Linux


    Sometimes users take their removal drives and unplug and replug them to test what happens during the failure of a disk. However, this breaks things quite badly due to the /dev/mapper in LUKS not coming back online due to it not being closed. In other words, generally with non-encrypted drives the process is smooth but when encrypted you may want to follow a strategy like this: We can see below that both disks are unavailable as they were physically remov........
  • [error] (28)No space left on device: Cannot create SSLMutex Apache Solution Linux CentOS Ubuntu Debian Mint


    Have you got this error from Apache? [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [error] (28)No space left on device: Cannot create SSLMutex At first glance it appears that you may be out of disk space but the issue is ipc or interprocess communication. This will clear out the ipcs processes so things can work, this often happens during high traffic and may be a sign of DDOS. The command below will fix it, it will list al........
  • Save money on bandwidth by disabling reflective rpc queries in Linux CentOS RHEL Ubuntu Debian


    Even today we see a lot of servers that have different services and ports open for rpc and this creates not only potential inward vulnerabilities but perhaps more common, the abuse of your network resources in reflective rpc queries. To stop this problem, you should disable and remove all services relating to rpc or at least block all relevant ports for the service. Surprisingly, there are still some providers and OS installs in Linux that install these services and leave them........
  • docker error not supported as upperdir failed to start daemon: error initializing graphdriver: driver not supported


    Nov 15 17:00:49 rttbox kernel: overlayfs: filesystem on '/var/lib/docker/overlay2/check-overlayfs-support450709549/upper' not supported as upperdir Nov 15 17:00:49 rttbox dockerd[93755]: failed to start daemon: error initializing graphdriver: driver not supported The above error is often/normally caused because you are trying to run docker out of an unsuitable directory/filesystem. For example if you try to place docker's data inside an existing overl........
  • qemu-system-x86_64: Initialization of device ide-hd failed: Failed to get


    You start a qemu like this and another VM already started with the same .iso qemu-system-x86_64 -enable-kvm -m 4096 -cdrom some.iso But you get this error: qemu-system-x86_64: Initialization of device ide-hd failed: Failed to get "write" lock Is another process using the image [some.iso]? It's odd because the -cdrom by default is read-only and qemu should not want or care about getting write lock on........
  • Linux custom kernel is huge solution


    You may have been expecting a normal sized kernel but if you don't disable these .config options you may have a kernel that is several gigabytes. CONFIG_SLUB_DEBUG=no CONFIG_DEBUG_INFO=no CONFIG_DEBUG_MISC=no Rebuild and you should find that the kernel is the normal and as expected size.........
  • TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x3a (or later) - Linux how to upgrade CPU microcode


    [ 0.206301] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x3a (or later) [ 0.430409] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.430411] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 2.980359] microcode: sig=0x306f2, pf=0x1, revision=0x36 [ 2.981621] microcode: Microcode Update Driv........
  • How To Stop DNSMasq from listening on all IPs/Interfaces and allow only localhost


    Some people find it less than intuitive to do on DNSMasq and by default DNSMasq is available on 0.0.0.0 which could even be your LAN or Public IP. Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp ........
  • du - VAS Billing Subscriptions Hack/Scam MLPremiumSub Invascom Astromart Issues Complaint


    If you have du, you may want to check your bill, as you can read about a longstanding issue with fraudulent charges showing up and many users claiming they did not subscribe or solicit those offers. These don't normally show up on new accounts, but they seem to target established users and maybe even users they suspect are not watching their phone or bills, while they are on vacation. These charges can frighteningly happen with 0 interaction from the user despite what........
  • Docker Swarm vs Kubernetes Comparison Guide


    A lot of companies are unsure which solution to choose and many may not be aware of Docker Swarm as an alternative to Kubernetes. One thing that many Sysadmins find is that Docker Swarm is simply easier, quicker to setup and maintain by far than Kubernetes.........
  • When is it time to leave your VPS/VDS Cloud Hosting Provider?


    When Is It Time to Leave Your VPS, VDS, and Dedicated Server Provider? Choosing the right hosting solution—be it Virtu........
  • 2024 Buyer's Guide: How to Choose and Buy the Best VPS/VDS for Your Needs - Tips and Strategies


    In today’s digital landscape, finding a reliable and secure Virtual Private Server (VPS) or Virtual Dedicated Server (VDS) goes beyond just comparing specs and prices. With increasing concerns over data privacy, security breaches, and government surveillance, the wisdom of choosing your VPS/VDS provider based on juri........
  • Postfix / sendmail config for DKIM, SPF and DMARC Tutorial Guide E-mail Delivery for Hotmail.com Gmail.com and More HowTo


    This will be the goto to help solve e-mail delivery issues and talk about many practical issues that happen between developers, admins and scripts that send e-mail and do things that may not be acceptable or cause deliverability problems. Sendmail Stuff Edit /etc/mail/sendmail.mc The problem is that if you send directly out from the server using the mail function, the Return-path of the e-mails will be username@thehostnameoftheserver.com. Let........
  • Install Grafana on Linux Debian Ubuntu Tutorial Guide


    First we need a few extra packages: apt update apt install -y adduser libfontconfig1 musl sudo wget https://dl.grafana.com/enterprise/release/grafana-enterprise_10.3.1_amd64.deb Install / Enable Grafana dpkg -i grafana-enterprise_10.3.1_amd64.deb dpkg -i grafana-enterprise_10.3.1_amd64.deb (Reading database ... 44309 files and directories currently installed.) Preparin........
  • How To Completely Disable ufw in Linux Ubuntu Mint Debian


    This is for the situation that you're doing other things that may conflict or have your own custom rules and ufw keeps overriding iptables. A lot of guides don't work, and even ufw reset does not work, because it still leaves the old ufw chains. Here is what works to disable ufw completely systemctl stop ufw systemctl disable ufw ufw disable rm -f /et........
  • vi vim not doing code highlighting E319: Sorry, the command is not available in this version solution


    Normally syntax highlighting is the default behavior. You can enable it manually by hitting :syntax on But normally you'll have this error because of the missing package. E319: Sorry, the command is not available in this version Solution install the vim-gui-common package: apt install vim-gui-common After that you should find that the code is highli........
  • Linux how to get list of all timezones on system Ubuntu


    find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV" Africa/Addis_Ababa Africa/Abidjan Africa/Blantyre Africa/Lusaka Africa/Casablanca Africa/Libreville Africa/Asmara Africa/Bujumbura Africa/Dakar Africa/Lagos Africa/Malabo Africa/Harare Africa/Kigali........
  • How To Upgrade Debian 8,9,10 to Debian 12 Bookworm


    Step 1.) Upgrade to Debian 11 first The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful. Step 2.) Update sources.list Update your /etc/apt/sources.list like this: deb http://........
  • Linux dhcp dhclient Mint Redhat Ubuntu Debian How To Use Local Domain DNS Server Instead of ISPs


    If you are running a local DNS server like named/bind and don't want to use the ISPsupplied DNS servers that are announced via a DHCP request (using dhclient) then the solution is simple. The reason should be obvious, but normally running your own DNS server will provide a more reliable, and fast DNS response and you won't have to worry about filtering as much (unless your upstream filters or proxies outgoing DNS requests). Edit /etc/dhcp/dhclient.conf........
  • How To Setup Python3 in Ubuntu Docker Image for AI Deep Learning


    The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself. I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all. docker run -it --runtime=nvidia --gpus all ubuntu bash These works for most images li........
  • Linux Ubuntu Mint how to check nameservers when /etc/resolv.conf disabled solution


    You'll notice that /etc/resolv.conf contains dire warners on most Linux Desktops. # This file is managed by man:systemd-resolved(8). Do not edit. # # This is a dynamic resolv.conf file for connecting local clients to the # internal DNS stub resolver of systemd-resolved. This file lists all # configured search domains. # # Run "resolvectl status" to see details about the uplink DNS servers # currently in use........
  • How to Reset CIPC Cisco IP Communicator for CME CUCM CallManager


    Just hit **# on the keypad and the CIPCwill enable the button in settings for a factory reset. Sometimes the phone may run into issues or may be unable to register to another tftp server (eg. another CME or CUCM server) due to a bug or maybe due to the security settings tying it to a specific server. Step 1 - Click Settings Step 2 - Hit "**#"........
  • Internet Explorer Cannot Download File "Your security settings do not allow for this file to be downloaded." Security Settings Solution


    By default in most newer Windows installs, you will not be able to download files from "Internet" sites and you'll get this error "Your security settings do not allow for this file to be downloaded." Solution to Enable Downloads in IE Internet Explorer 1.) Go to Settings (button) -> Internet options -> Security (tab) 2.) Click "Internet" and then the "Custom Level" button. 3.) Find the following section and set D........
  • Linux swapping too much? How to check the swappiness and stop swapping


    We could always disable swap but this would normally be a bad idea unless you have an incredible amount of RAM and a workload that will never exceed it. However, for live/containerized and high performance environments it could be desirable. Another middle ground may be to set swappiness to a lower number. You may also want to clear your kernel's cache, which could be eating up RAM unnecessarily by c........
  • request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted solution


    request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted This is usually caused by a mismatch in architecture and happens frequently in development environments. Here is a example of what caused this issue: Your binaries are based on one architecture Your kernel was compiled with another architecture. Why does this happe........
  • How to upgrade to the latest Python version on Linux Ubuntu Debian Mint 3.11


    A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version. Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended): Step 1 - Add the repo apt-add-repository ppa:deadsnakes/ppa If you get an error about requests then install it:........
  • kernel panic initramfs not syncing cause solution


    Check your initramfs if it's missing /dev/null or /dev/console, this is likely the reason. If you want all actual devices to be created you could also enable devtmpfs in your kernel (.config) and mount like this during init: CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y mount -t devtmpfs none /dev But note devtmpfs will not create /dev/null or /dev/console for........
  • vi cannot copy and paste automatic visual mode solution


    See below in the screenshot that copy is disabled by visual mode which enables automatically: Fix it by setting this .vimrc option: echo "set mouse-=a" >> ~/.vimrc........
  • How to install and configure haproxy on Linux Ubuntu Debian


    haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx. haproxy is used by many large sites per Wikipedia: HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........
  • How to install Windows or other OS and then bring to another computer by using a physical drive and Virtual Machine with QEMU


    This has been a tried and true method for Windows because it is finicky with hardware changes without a reinstall (eg BSOD on boot is what happens 9/10 times unless you move to the same hardwar). Surprisingly, if you use a QEMU VM and do a standard install, it has worked in every system I've thrown the drive in afterwards. So the play is this, use a USB SSD, physical SATA drive plugged internally or for convenience, you could use a SATA to USB adapter on another computer to perf........
  • RHEL 8 CentOS 8, Alma Linux 8, Rocky Linux 8 System Not Booting with RAID or on other servers/computers Solution for dracut and initramfs missing kernel modules


    This seems to have changed for RHEL 8 where a normal dracut to update your initramfs creates a system that only boots for the running kernel. For example if you have Kernel 5 and then chroot into a RHEL 8 variant which uses kernel 4.18, and run dracut, it seems that by default the system will be unbootable. It is also the case that if you move your RAID array or drives to another server that it will be unbootable, because dracut seems to only include modules needed for the curre........
  • Ubuntu Linux Mint Debian Redhat Cannot View Files on Android iPhone USB File Transfer Not Working Solution


    If you plugin your phone to your computer and enable USB File Transfer/Allow on the phone side but the contents of your phone on the computer side are empty in the file manager, you probably don't have mtp-tools.MTP or media transfer protocol is the standard protocol that most phones use to communicate over USB to the computer. Just do this to fix it and get access to your files: apt install mtp-tools After that you should be a........
  • Virtualbox Best Networking Mode In Lab/Work Environment without using NAT Network or Bridged


    Virtualbox is a very powerful tool, but for some use cases it is less than optimal. Say you are in a work, lab or other environment where you are not alone on the physical network and there could be overlap of IPs, but you need all of your VMs to be contactable from your host, VMs need to communicate with each other, and VMs need internet. NAT Network will give you VM to VM communication and internet, however, it is buggy and unstable. It also doesn't allow host to VM co........
  • Linux grub not using UUID for the root device instead it uses /dev/sda1 or other device name solution


    You can read lots of posts about this issue but there is not much information about why this is the case or how grub determines the root= device name. Some even suggest modifying grub.cfg manually which is a disaster as the next kernel update will cause grub to revert back to the device name. For most people this won't be an issue but those using template system, automated deployments and working in embedded may run into this issue with custom embedded and created minimal kernel........
  • Debian Ubuntu apt install stop daemon questions/accept the default action without prompting


    This can be a real pain when automating things and you do an apt install and some packages ask a lot of questions. Make sure you set this variable when running: DEBIAN_FRONTEND=noninteractive Remember as well that if chrooting you will want to run like this: DEBIAN_FRONTEND=noninteractive apt install -y yourpackagename ........
  • iptables NAT how to enable PPTP in newer Debian/Ubuntu/Mint Kernels Linux


    Remember that control connections are established on port 1723 and then actual data is transferred over GRE protocol 47. If you have a NAT setup this will work without special forwarding or accepting of GRE packets (normally if you are not blocking outgoing connections and accepting established and related connections). The below two commands will get things going so PPTP and GRE work We first load the ip_nat_pptp module which allows PPTP to work with........
  • Grandstream Phone Vulnerability Security Issue Remote Backdoor Connection to 207.246.119.209:3478


    Have you checked your router/firewall logs and disconcertingly see connections to an unknown IP207.246.119.209:3478 from your Grandstream VOIPphones? You're not alone and the Grandstream forums have discussed this issue. However, even their own staff d........
  • Linux How to Check Which NIC is Onboard eth0 or eth1 Ubuntu Centos Debian Mint


    So say you happen to have 2 NICs of the exact same chipset, they will generally show up as the same name, with possibly a different revision in lspci. Normally this is not an issue if you have a server with 4 NICs, generally the eth0 to eth3 appears from left to the right (or right to left on some vendors) so it doesn't take much figuring out. Generally if you have different chipsets for different NICs, it should be easy to know which one is eth0 or the first NIC in the OS.........
  • VboxManage VirtualBox NAT Network Issues Managment Troubleshooting


    If you find your NAT Network is not working properly, the first thing you may want to do is list the networks, check their status and make sure the Network is actually started and configured as you expect (eg. is DHCP on and enabled?). This is a long known, unresolved bug that seems to affect Version 6 randomly and disportionately on especially Mint 20/Ubuntu 18. https://www.virtualbox.org/ticket/1474........
  • Generic IP Camera LAN Default IP Settings DVR


    If you are converting a generic wifi IP camera to ethernet, it may not be that simple as many are default hard coded to a static IP of 192.168.1.168 and login info admin/admin. From there you can login to the camera and assign it to DHCP by going to http://192.168.1.168 For security these cameras +DVR should be on a separate untagged VLAN or if possible a physically isolated non-internet connected switch/network. The reference below is applicable to many of the r........
  • Enable Turbo Mode for CPU Ubuntu Linux Mint Debian Redhat


    Sometimes due to your BIOS/EFI you may find that you have chosen "Energy Efficient" for your CPU which may effectively disable turbo mode. This is because "Energy Efficient" will often restrict or throttle your CPU to the base speed. This can impact nearly any CPU such as Intel's, AMDs, Opteron, Xeon etc... This is of course frustrating, for example if you have a CPU that is 2.0GHz base speed but turbo to 2.5GHz, you will never hit more than 2GHz.........
  • docker / kubernetes breaks Proxmox QEMU KVM Bridge VMs


    Docker adds iptables rules that break a lot of things including MASQUERADE or anything that needs the FORWARD table. If NAT is not working after Docker installation, it is probably because it set the iptables FORWARD policy to DROP. This may also make you think that your br0 or bridge is not working, but it's likely just due to what we'll mention later on below, that, Docker probably set your FORWARD chain to default DROP all packets, so nothing on your bridge ever makes it out........
  • Cisco UC CME How To Enable Licensed Features


    Router#show license Index 1 Feature: ipbasek9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted Lic........
  • from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60 sys.stderr.write(f"ERROR: {exc}") from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packag


    Solution for python pip3 not working anymore from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60 sys.stderr.write(f"ERROR: {exc}") wget https://bootstrap.pypa.io/pip/3.5/get-pip.py python3 get-pip.py DEPRECATION: Python 3.5 reached the end of its life on September 13th, 20........
  • Cisco Switch / Router How To Restore Factory Default Settings


    1.) Make sure your conf register is 0x2102 Do show version and at the very end of the output you will see the Configuration register. show version Configuration register is 0x2102 If the config register is not 0x2102 then enter this command: r1#configure terminal r1(config)#config-register 0x2102 r1(config)#end 2.) Let's Erase the NVRAM/flash........
  • Cisco 2900 3900 Router Password Reset How To Reset Enable Password


    It is a bit different and annoying here for these types of routers/models as you need to physically remove the CF (Compact Flash) and only then, will it enter ROMMON mode (Ctrl + Pause remotely over the console will not do it for us). This means you cannot do this remotely, or at least not without the help of a remote/physical helper. Step 1.) Power off, router and remove CF Disk Slot#2 Go to the router and remove the slot#2 cover uses your hand or it may help to use a........
  • How To Install convert MBR Legacy booting GRUB to EFI from a non-EFI Linux Environment Ubuntu Mint Debian


    1.) Create your EFI/ESP Partition If you happen to have some free space on the drive already then this is easy, just create a new partition of at least 100M. The nice thing about the EFI spec is that it must just be in the first 2.2TB of space so for most users, it means you can simply resize the last partition(downsize it by 100M) and then add an EFI partition at the end. For example if you had this partition scheme: /dev/sda1 = /........
  • Translating "cisco" ...domain server (255.255.255.255) Cisco Router/Switch Solution


    If you are in enable mode and make a typo, the router will treat it as a domain name and try to resolve it, and if it can't resolve it, you'll have to wait until it times out. Here's how to solve the Translating domain server error in Cisco Enter this in config mode: no ip domain-lookup Be sure to sav........
  • CentOS 7 / 8 cannot boot with with mdadm RAID array solution


    This article about migrating to a CentOS 7 /8 RAID mdadm array has a lot of info but I wanted to focus specifically on what newer versions of CentOS 7 require to boot mdadm and what changes are necessary on CentOS 7.8+ CentOS 7 / 8 mdadm RAID booting requirements This assumes you are chrooting into an existing install or using it to get a new deployment ready. However, these steps can........
  • Loaded: masked (Reason: Unit hostapd.service is masked.) Solution in Linux Debian Mint Ubuntu


    If you are getting this error from systemctl "Loaded: masked (Reason: Unit hostapd.service is masked.)" we need to unmask the service. Solution systemctl unmask hostapd Removed /etc/systemd/system/hostapd.service. It's fixed root@routerOS:/var/log# systemctl start hostapd root@routerOS:/var/log# systemctl status hostapd ● hostapd.service - Access point and authentication server for Wi-Fi and Ethern........
  • Libreoffice Impress How To Change The Color of Links


    There are lots of wrong answers out there perhaps for much older versions of LibreOffice. Tools -> Options Then under LibreOffice ->Application Colors below. Change the Viisted and Univisted link colors Now you should h........
  • i915 nouveau Nvidia GPU not starting lightdm Xorg failing solution for Could not determine valid watermarks for inherited state


    It may appear to be an Xorg or lightdm/gdm/mdm error but in reality for many users with this issue, it's a driver conflict and issue. I had a system that had two GPUs, an Intel and Nvidia GPU. The only thing that got it working was to remove the nouveau driver and blacklist it so it never came back, then the Intel GPU works fine without these issues. Solution sudo rmmod nouveau add nouveau/other driver to blacklist edit th........
  • Debian Mint Ubuntu Howto Disable Network Manager


    NetworkManager is normally good for GUI users who may not be good with manually confguring devices, but if you are using things like bridging and bonding, it will often break things. How To Disable NetworkManager systemctl disable NetworkManager Now that it's disabled you will need to stop NetworkManager. NetworkManager will still be running until you reboot next or manually stop it. How To Stop NetworkManager systemctl stop........
  • amdgpu AMD GPU Xorg Won't Start [3576284.324] (EE) Segmentation fault at address 0x0 [3576284.325] (EE) Fatal server error: [3576284.325] (EE) Caught signal 11 (Segmentation fault). Server aborting


    Here is how Ifixed it on a Mint/Ubuntu install 1.) First download the latest AMDGPU-Pro driver from here: https://www.amd.com/en/support Navigate to your relevant video card: 2.) Download the installer One issue is that by default they give you a version for the latest version of........
  • symbol 'grub_calloc' not found grub boot error solution / fix


    I've encountered this after upgrading some Debian/Ubuntu/Mint based systems for no explicable reason, although there are some bug trackers on Ubuntu that document this: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1889509 The short end of the solution is that you need to properly reinstall grub. 1.) Boot from a LiveCD 2.) Mount your root / filesystem and don't forget to mo........
  • How To Tell Which Repository a Package Comes From Debian Mint Ubuntu


    Just use apt-cache policy to find the repo of a package: apt-cache policy lxd lxd: Installed: 3.0.3-0ubuntu1~18.04.2 Candidate: 3.0.3-0ubuntu1~18.04.2 Version table: *** 3.0.3-0ubuntu1~18.04.2 500 500 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages &nb........
  • LightDM Mint Ubuntu Debian won't start errors Nvidia Graphics


    This error implies that there may be an issue with Xorg or maybe your NVIDIA GPU cannot start or initialize: 35 laptop kernel: [ 2031.857704] nvidia: loading out-of-tree module taints kernel. 35 laptop kernel: [ 2031.857724] nvidia: module license 'NVIDIA' taints kernel. 35 laptop kernel: [ 2031.857725] Disabling lock debugging due to kernel taint 35 laptop kernel: [ 2031.873280] nvidia: module verification failed: signature a........
  • WARNING: Unable to determine the path to install the libglvnd EGL vendor library config files. Check that you have pkg-config and the libglvnd development libraries installed, or specify a path with --glvnd-egl-config-path. Linux Ubuntu Mint Debian E


    If you get an error like this when installing the Nvidia drivers: WARNING: Unable to determine the path to install the libglvnd EGL vendor library config files. Check that you have pkg-config and the libglvnd development libraries installed, or specify a path with --glvnd-egl-config-path. Just install these packages: &nbs........
  • How To Do Linux Network Bonding Teaming in Mint Debian Ubuntu


    Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows. There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........
  • LXC Containers LXD How to Install and Configure Tutorial Ubuntu Debian Mint


    If you are using mint, delete the preference that stops snap from installing (as it is required for lxc) sudo rm /etc/apt/preferences.d/nosnap.pref 1. Install lxd: sudo apt install lxd Issues install lxd or errors? Click here Debian at this time does not have lxd so you'll need to use snap: sudo apt in........
  • GlusterFS HowTo Tutorial For Distributed Storage in Docker, Kubernetes, LXC, KVM, Proxmox


    This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory. Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage. One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........
  • How To Enable Linux Swapfile Instead of Partition Ubuntu Mint Debian Centos


    This may be necessary if you have a VM or if for some reason you just want to be more efficient with your space and have the flexibility of changing your swap space at will. What we mean is the ability to use a "swap file" or similar to the Windows "pagefile" that normally resides on the root or c: partition of Windows. Here's all you have to do and then you to can have a single partiton with everything, including the swap file on the root partition if you........
  • 404 Not Found [IP: 151.101.194.132 80] apt update Debian 11 Bullseye Solution The repository 'http://security.debian.org bullseye/updates Release' does not have a Release file.


    This happens during an apt update and is related to an issue with sources.list, which is particularly troubling, if you are doing a "live-build". P: Configuring file /etc/apt/sources.list Hit:1 http://deb.debian.org/debian bullseye InRelease Get:2 http://deb.debian.org/debian bullseye-updates InRelease [39.4 kB........
  • (firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory) Solution


    (firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory) ExceptionHandler::GenerateDump cloned child 9743 ExceptionHandler::WaitForContinueSignal waiting for continue signal... ExceptionHandler::SendContinueSignalToChild sent continue signal to child [Parent 9562, Gecko_IOThread] WARNING: pipe error (40): Connection reset by peer: file /build/firefox-EymEXX/fire........
  • Docker Tutorial HowTo Install Docker, Use and Create Docker Container Images Clustering Swarm Mode Monitoring Service Hosting Provider


    The Best Docker Tutorial for Beginners We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........
  • How To Reset Windows Server Password 2019, 2022, 7, 8, 10, 11 Recovery and Removal Guide Using Linux Ubuntu Mint Debian


    This was done on Mint 20 but works the same on nearly any new Linux, but is only recommended for people comfortable or familiar with Linux. This method will work on almost all versions of Windows from NT, 2000, 2003 Server, 2008 Server, 2012 Server, 2016 Server, 2019 Server, 2022 Server, XP, Vista, 7, 8, 10 and 11. However, if you want the easiest solution to........
  • How To Create OpenVPN Server for Secure Remote Corporate Access in Linux Debian/Mint/Ubuntu with client public key authentication


    Why choose OpenVPN instead of a firewall appliance? OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time. When comparing OpenVPN with traditional firewal........
  • HongKong VPS Server, Cloud, Dedicated Server, Co-Location, Datacenter The Best Guide on Hong Kong, China Internet IT/Computing


    In our 2024 VPS Server/Cloud Buyer's Guide, we place the location of your VPS/hosting/server as one of the priorities that is often overlooked. 2024 Update - Datacent........
  • Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source. E: Package 'wget' has no installation candidate. Solution


    These types of errors are normally caused by misconfiguration of your /etc/apt/sources.list. In this example on Debian 10, if you didn't complete the install correctly, you will have no repos enabled and only rely on CDROM. "Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source. E: Package 'wget' ha........
  • tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE tag#4 Sense Key : Illegal Request [current] res 40/00:b4:98:02:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) solution


    You might assume you have a bad drive or the SATA interface/cable is bad, or the power supply is bad/weak to the drive. These are all possible issues, but definitely check your SATA cable for "twisting". It is a big issue because until the error stops or times out, your system will not boot (in my case this was the case even though the drive with the issue was not part of the OS or booting process at all). If you run an open rig that you move around often that ha........
  • Wazuh / OSSEC Install and Configuration Howto Tutorial Guide for Monitoring Agents SIEM


    How To Install Wazuh Server / Quickest Installation Wazuh (forked from the well known OSSEC project) is a full SIEM (Security Information Event Management) that works extremely well with the platforms it natively supports as an "Agent", which allows you to do scans of everything such as all processes running, CVE vulnerability check, incident reporting etc... Prerequisites: A lot of issues with Wazuh seem to be caused by i........
  • Linux Debian How To Enable Sudo/Sudoers for User "User not in sudoers file" Solution


    If you get an error that you aren't in the sudoers file, this typically means that your user is not designated as an admin with sudo privileges. In plain English, when it comes to some OS's like Debian including 10,11 etc.., by default the user is created without special privileges which is contrary to how Ubuntu/Mint handle the secondary user. Let's check the sudoers file to see the problem.........
  • iptables how to delete rules based on source or destination ip port or just the rule itself


    Let's say we have an IP that is dropped by iptables 192.168.20.2 service iptables status|grep 192.168.20.2 184 DROP all -- 192.168.20.2 0.0.0.0/0 You can use iptables itself like this to list the line numbers: iptables -L --line-numbers Two Ways To Delete The iptables Rule........
  • How to allow SSH root user access in Linux/Debian/Mint/RHEL/Ubuntu/CentOS


    A lot of newer installs will automatically prohibit the root user from logging in directly, for security reasons or they will only allow key based access. If you know what you are doing/don't care about security or have an incredibly secure password for testing, then you can enable it. Edit this file: /etc/ssh/sshd_config Find the following line: PermitRootLogin Set it like this: PermitRootLogin yes Now rest........
  • Ansible Tutorial - Playbook How To Install From Scratch and Deploy LAMP + Wordpress on Remote Server


    1. Let's work from an environment where we can install Ansible on. If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way: sudo apt install gpg sudo add-apt-repository ppa:ansible/ansible sudo apt update........
  • Ceph Install Errors on Proxmox / How To Fix Solution


    This normally happens when you interrupt the install of Ceph: pveceph install update available package list start installation Reading package lists... Done Building dependency tree... Done Reading state information... Done gdisk is already the newest version (1.0.6-1.1). ceph-common is already the newest version (15.2.15-pve1). ceph-fuse is already the newest version (15.2.15-pve1). Some package........
  • Proxmox Update Error https://enterprise.proxmox.com/debian/pve bullseye InRelease 401 Unauthorized [IP: 144.217.225.162 443]


    Are you getting this error in Proxmox while trying to apt update or install Ceph? apt update Hit:1 http://security.debian.org bullseye-security InRelease Err:2 https://enterprise.proxmox.com/debian/pve bullseye InRelease 401 Unauthorized [IP: 144.217.225.162 443] Hit:3 http://ftp.hk.debian.org/debian bullseye InRelease ........
  • Proxmox How To Enable Ceph Distributed Storage Cluster with OSD and Pools


    How To Install Ceph If you stopped an install of Ceph midway you will need to manually restart it with "pveceph install" Remember that your VM needs to have working internet (gateway) and DNS in order to connect to the apt repo to download all of the packages that Ceph requires. Remember to repeat these steps for each node that you want Ceph on. ........
  • Virtualbox Vbox Issue Cannot Enable Nested Virtualization Button is Grayed/Greyed Out and Unclickable HowTo Solution


    In newer of versions of Virtualbox, especially above 6.0 (eg. 6.1 like the example below), a lot of times the "Enable Nested VT-x/AMD-V". If you are having this issue, you will see the option is grayed out. It doesn't mean that your computer does not support virtualization, although it is possible it is disabled in the BIOS. You can verify........
  • Virtualbox VBOX Howto Port Forward To Guests


    NAT Network, the VMs can communicate but your host cannot access them by default. NAT VMs have internet but cannot communicate with each other. Bridged is simple and allows full LAN access as if you had a physical machine plugged in but is often bad for testing, work or corporate environments and is not very portable when it comes to moving your VMs to other locations and networks. Here is how you can use NAT Ne........
  • Linux Ubuntu Debian Centos Mint - How To Check if Intel VT-x or AMD-V Hardware Virtualization is Enabled?


    From the terminal do this: cat /proc/cpuinfo|grep -E "svm|vmx" You should get output like this(svm = AMD-v and vmx=Intel-VTx): flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqd........
  • Windows Cannot Format USB drive Device Media is Write Protected Error Solution


    First of all make sure that you don't have the write-lock or write-protect switch enabled on the SDCard or USB drive. If the above is not the case, then follow these instructions: Solution - Clear Read Only Attribute Hit "Windows Key+R" and enter "cmd" to enter the command prompt: Now type the following :........
  • Linux Mint 20 cannot install snapd missing solution


    The Linux Mint team has disabled it by setting an apt preference, you can edit or just remove the file: sudo apt install snapd Reading package lists... Done Building dependency tree Reading state information... Done Package snapd is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source........
  • Virtualbox VBOX How To Install Guest-Utils/GuestUtils so drag and drop and clipboard works Ubuntu Mint Debian Linux


    Just install these packages and restart the VM: 1.) Enable guest-utils on the host side: sudo apt install virtualbox-guest-utils virtualbox-guest-x11 2.) Enable guest editions on the VMside This must be done for each VM that you want to have the guest additons for accelerated GPU performance and for drag and drop/clipboard sharing First insert the Guest Addtions CD image........
  • How to install Kubernetes with microk8s and deploy apps on Debian/Mint/Ubuntu Linux


    Kubernetes Easy Beginners Architecture Guide Kubernetes is known as container orchestration and we should start at explaining the container part of it. A Container is what runs the actual application and based on an Image, and are more comparable to something like an LXC Container, Virtuozzo/OpenVZ using the Linux Kernel Namespaces feature. Containers run these images as independent, isolated operating environments under the OS's exist........
  • Cisco Howto Configure Console Port/Terminal/Comm Server with Async Cable Setup


    This assumes that you've already installed the relevant HWIC cards eg. Cisco Asynchronous Serial NIM These are essentially cards that you install into your router, once installed you connect an Async cable to one of the ports on the card which normally gives you 8 console cables and are normally labelled 1 through 8. You connect all of the cables to the devices you need (even non-Cisco devices) whether switches, routers or firewalls, they will usually work. The real m........
  • Ubuntu/Debian Linux/Unix Howto Setup Install Syslinux Bootable USB with EFI and MBR from Command Line/CLI Terminal


    There aren't too many simple guides that show you how to use commands to setup your USB or other drive as a normal bootable drive where you can easily boot custom kernels or whatever OS you would like. 1. Get the tools we need: We install "syslinux" for MBR and "syslinux-efi" for EFI and "MBR" as we need a tool that embeds the actual MBR into our USB: sudo apt install syslinux syslinux-efi mbr........
  • Cisco Switch Howto Reset Password


    This was done on a 2900 but applies to all the switches of the same era. Step 1 - Power Cycle and enter recovery mode If you have physical access you can power cycle and hold the mode button down for 15 seconds. After that the SYS light will flash on the switch and you will see the following screenshot. If you don't have physical access (eg. it is a datacenter swich over console only) then power cycle and hit "Ctrl+Pause/B........
  • SSH cannot connect to old servers/devices/switches/routers/Cisco/Juniper Unable to negotiate with 192.168.20.2 port 22: no matching key exchange method found. Their offer: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hell


    A lot of older devices either support telnet or very old SSH keyx algorithms which are insecure and disabled by all newer/modern SSH clients for security reasons. However, sometimes you may be on a LAN via VPNor some other secured network or for whatever reason, absolutely, need to connect to this device and sometimes old/embedded devices may not be possible to update to a newer SSH server. If you run into this you may be using a modern/newer SSH client and get thi........
  • Cisco Router Password Reset Howto Guide Solution Cannot Login /Unknown Enable Password 2600, 2800, 2900, 3900


    It is common that you may get access to undocumented equipment and need to reset the password. This applies to many Cisco routers whether 2600, 2900, 3900 etc... Cisco's Guide says to hit Ctrl +Pause/Break but if it doesn't work on some devices causing people to say "cisco password reset pause break does not work", you can see Cisco's alternative key combinations here:........
  • VirtualBox VBox Nat Network Handing Out Wrong IP Address Subnet Solution


    This seems to be an ongoing issue that is still reproducable in the latest Ubuntu Vbox 6.x. The default NAT Network range is usually 10.0.2.0/24. If you change this range it does not seem to work properly. Say we change the range to 10.50.1.0/24 If you get a new lease you will find that you get an IP from the old range but the default gateway is from the new range. ........
  • Unable to mount location Failed to retrieve share list from server: Connection timed out - Samba/Linux Filesharing Not working Ubuntu Mint Linux Solution


    So you're trying to browse to a properly configured Samba share but you get this error: Unable to mount location Failed to retrieve share list from server: Connection timed out If your config is right, it can be due to a protocol miss-match where your client has not enabled SMB3 but by default the other side (server) has enabled it. You can test this out to see with the smbclient tool........
  • Juniper JunOS Command Overview and Howtos Switch, Router, Firewall Tutorial Guide


    Enable "cli" mode equivalent in JunOS cli Configure Mode configure So rather than going to the console on a Cisco switch and typing "enable" and then "conf t", the equivalent in JunOS is "cli" and "configure". How Do You Apply Changes You've Made? You can make all kinds of changes to the switch, but remember they are not........
  • Linux Grub not booting the intended kernel solution in Debian, Mint, Ubuntu how to specify which kernel to boot by default


    Traditionally kernels were numbered starting from 0 but by default the "new style" of grub boot loading considers each subkernel item to be different so if you have 3 entries for 4.40-148 rather than counting for 1. To get the expected behavior let's show this example and how we can boot it We do a grep on menuentry in /boot/grub/grub.cfg to see all of the bootable kernels rather than scrolling through loads of extra entries we don't care about (thou........
  • QEMU KVM Keyboard Problems Not Working Right Repeating Characters, Ctrl+C Copy and Paste not working right when using PS2 mouse in guests Solution


    It seems that QEMU/KVM's default PS2 mouse and keyboard doesn't work right in most cases. I have especially observed issues using Ctrl+C and Ctrl+V and in Linux you may see repeated key presses in the terminal and you will wonder why you copied something and it's not in the clipboard when you try to paste. The way to temporarily fix it is to press the key that is repeating once(works in Linux but not really in Windows). Sometimes when moving your mouse it will also s........
  • Linux how to compile binary with static sharedobjects embedded instead of dynamic to use on multi-distributions and avoid glibc compatiblity issues


    One simple flag to configure will create a makefile that statically links all the shared objects and embeds them instead the binary execute. This means as long as you have the same architecture that things should run. Eg. if you have an old version of Debian with a different version of glibc, then this will solve that problem. ./configure LDFLAGS="-static" To test that it is really statically linked run ldd: ldd src/wget........
  • qemu 4 compilation options


    How To Compile QEMU Manually (using sensible options) 1.) Download the QEMU source file you want. wget https://download.qemu.org/qemu-4.2.0.tar.xz 2.) Extract The Source File tar -Jxvf qemu-4.2.0.tar.xz 3.) Switch to the extracted source cd qemu-4.2.0 4.) Make sure we have the right libraries and tools to compile QEMU manually sudo apt install build-e........
  • CentOS 7 8 How To Disable SELinux


    To disable selinux temporarily and immediately: setenforce 0 To make it permanent edit /etc/selinux/config: vi /etc/selinux/config........
  • How To Boot, Install and Run Windows 2000 on QEMU-KVM


    Interestingly enough Windows 2000 works fine on QEMU 64-bit but you have to specify Pentium as your CPU otherwise it doesn't complete the install (it will not pass the detecting/setting up devices phase). -vga cirrus is wise because it is supported by Windows 2000 and allows higher resolutions and 24-bit color. -cpu Pentium emulates an old computer and is necessary for install to complete -device rtl8139 is important as this oldschool Realtek 8139 NIC is supported by W........
  • Huion and Wacom Tablets How To Install in Linux Mint / Ubuntu and make the stylus work properly


    It took a lot of fiddling to make a Huion Kamvas 13 Pro work in Linux but it simple once you know what to do. Don't bother searching as it is unlkely there is a guide out there that will actually make your tablet work. It mainly comes down to the fact that the hid_uclogic kernel module is buggy or doesn't support MANYof these wacom based/Huion tablets properly. What was happening with me is that Ihad the Kamvas 13 Huion setup as a secondary screen/monitor.&nb........
  • Linux How To Stop Missing Drive from Halting Boot Process in fstab


    When you automount a drive in /etc/fstab even if it's not important like an external drive that you only use sometimes and is not required for booting, it will prevent a successfuly boot. If you disable quiet mode for booting you will see something like below "A start job is running for dev-disk ...." How do we fix an fstab entry from preventi........
  • How To Replace Audio Track of Video using ffmpeg


    A very common use case is that you don't want to waste time using a video editor that requires you to open it up and manually import the video clip and audio clip, then manually delete the old audio track and import the video and new audio. That's too much work and time since we don't want to go through the hassle. ffmpeg is our solution, all we have to do is specify 3 variables and we're done! -i Windows2019-Server-Noaudio.mp4 is our in........
  • Linux Mint Ubuntu Debian CentOS Dual Boot Install Issues


    The best way to avoid this problem is to understand how your BIOS is setup to boot. Often newer machines will default to U(EFI) which is different than the traditional MBR/Legacy mode. The problem is that this may not be apparent, often a BIOS Boot Menu will show a Legacy Boot Option and EFIOption without defining it. A good example of this is if your USB is called "Kingston" you may see in your Boot Menu "Kingston" and also "Ubuntu"........
  • Linux Mint/Debian/Ubuntu/Centos Installer black grub screen and blank screen after trying to boot installer or main OS


    This happens to a lot of Nvidia users especially users of newer cards like the RTX series. If for example you are trying to boot and install Linux and you get a black and white grub2 screen instead of a nice graphical welcome installer, you probably suffer from this bug. It is normally followed by the user booting and finding they just have a blank/black screen. Here is the quick flow of steps to fix it: If you get a black grub scree........
  • Linux Mint Dual Boot Install Avoid Wiping our your Main C: drive /dev/sda MBR and EFI


    Before you try to install and dual boot it is very important to understand the concept of "what boot mode your BIOS is in" and "what mode you booted the installer to". Then follow the example of Linux Mint (but most Linux installers are very similar)to carefully understand WHERE you are installing your Boot Loader to whether that be MBR or EFI. How Am IBooted? First it's important to check your BIOS to see........
  • QEMU-KVM soundhw deprecated how to enable sound in QEMU 4.x series


    In QEMU 4 or higher you can no longer use the normal "-soundhw ac97" flag and it is much more complicated but here is a simple copy and paste on Linux that will just work: -audiodev you have to use -audiodev to specify the driver and id driver=pa id=someid -device you have to specify the same audiodev id you used in -audiodev and driver -audiodev driver=pa,id=pa1 -devic........
  • apcupsd how to setup and monitor APC UPS units


    It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc.. wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866 tar -zxvf apcupsd-3.14.14.tar.gz cd apcupsd-3.14.14 [root@somebox apcupsd-3.14.14]# ./conf........
  • Nvidia Ubuntu Linux Screentearing Video with solution driver


    This seems to happen on most if not all Nvidia cards but the good news is that if you are using any of the Linux drivers and have the nvidia-settings tool installed it is just a simple command. Solution: nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }" Enter the above command in your terminal and the screentearing will be fixed which is like enabling Tear Free on AMD cards.&........
  • access denied by acl file qemu-kvm: bridge helper failed


    /usr/libexec/qemu-kvm -enable-kvm -boot order=cd,once=dc -vga cirrus -m 4096 -drive file=~/23815135.img,if=virtio -usbdevice tablet -net nic,macaddr=DE:AD:BE:EF:D4:AB -netdev bridge,br=br0,id=net0 qemu-kvm: -usbdevice tablet: '-usbdevice' is deprecated, please use '-device usb-...' instead access denied by acl file qemu-kvm: bridge helper failed [root@CentOS-82-64-minimal 23815135]# /usr/libexec/qemu-kvm -enable-kvm -boot order=cd,once=dc -vga cirrus -........
  • Linux NIC connecting at 100M instead of 1000M gigabit speeds? It could be overheating


    I was using a small box as a router and one of the ports started going off and coming back at 100M. I truly believe it is simply that it was a case of overheating. Although CPUtemps were only about 67 degrees, the physical box itself was almost burning hot. Isolved the cooling issue and never had the issue again. Jul 28 15:09:27 swithbox kernel: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jul 28 15:09:28 swithbox kernel:........
  • "This kernel requires the following features not present on the CPU: cmov Unable to boot - please use a kernel appropriate for your CPU.


    You should only get this if you are using a Pentium II or something really old. The problem here is that newer kernels than 2.6 don't have true i386 support even if you tell it to compile as i386. It will still include features like cmov that break older computers from being able to work. Generally for very old computers like above, you need to use a 2.6.x kernel and of course make sure it is i386 and all the binaries are as well. ........
  • Linux Ubuntu Wifi Disabled Only Works When Laptop Plugged Into Wall AC Power


    This is very frustrating but the fix is usually easy once you read this blog. It's very frustrating when you find that your Linux / Ubuntu laptop's wifi will NEVER work unless it is plugged into the power. The wifi menu may say "Wifi disabled by hardware switch". You may find that your laptop has no switch or has a function wifi button on the keyboard but this does not work or have any effect. The cause is usual a "wmi" kernel module and simply doing an........
  • CentOS 6 impossible to compile a newer libguestfs


    yum -y install gcc make gperf genisoimage flex bison ncurses ncurses-devel pcre-devel augeas-devel augeas readline-devel checking for cpio... cpio checking for gperf... no configure: error: gperf must be installed configure: error: Package requirements (augeas >= 1.2.0) were not met: Requested 'augeas >= 1.2.0' but version of augeas is 1.0.0 yum remove augeas augeas-libs augeas-devel wget http://downl........
  • How To Get Started on Ubuntu with gpt-2 OpenAI Text Prediction


    apt install software-properties-common add-apt-repository ppa:deadsnakes/ppa apt update apt install python3-pip apt install python3.7 curl gnupg python3.7-dev git ln -s /usr/bin/python3.7 /usr/bin/python3 pip3 install numpy keras_preprocessing curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add - echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........
  • QEMU-KVM KVM Command Line Practical Guide


    Iam going to build this based on a series of small howto QEMU / KVMposts I've made as I feel much of the information is actually hard to find and piece together from the rest of the web. What I'm going to focus on is how to use virtio as the NIC because if you don't you get very slow NIC speeds but with the virtio NIC model you basically get host speeds. /usr/libexec/qemu-kvm -enable-kvm -smp 8 -m 16000 -net user -net nic,model=virtio -drive file=ubuntu-gpt2l........
  • Linux How To Change NIC Name to eth0 instead of enps33 or enp0s25


    Most newer distros inexplicably cause your NIC to have what Icall "random" non-standard name conventions because of systemd. This is a big problem for many people and especially those running servers. Imagine that you have a static IPconfigured for ens33 but then the hard disk is moved to a newer system, the NIC could be anything from ens33 to enp0s1, meaning that manual intervention is required to go and update the NIC config file (eg. /etc/network/interfa........
  • virt-resize: error: libguestfs error: could not create appliance through libvirt.


    This is caused because the user is running as qemu for virt-resize and if qemu does not have privileges to read from the source and write to the destination, it will fail with the below. So either change the uid of qemu or change the ownership of the source and target. Solution: export LIBGUESTFS_BACKEND=direct virt-resize --expand /dev/sda2 /root/kvmtemplates/windows2019-eval-template.img /root/kvmguests/kvmkvmuser4515........
  • Convert data or file to base64 on a single line


    base64 has legitimate uses too and can be an easy way to store a file or data within actual code for developers to keep things in a single file. For example let's take an image we'll see for an application's background: base64 -w 0 some.jpg >some.jpg-base64 -w 0 makes it output to a single line which makes it easy to store in a variable. Without the -w 0 it will wrap over multiple lines.........
  • mdadm: super0.90 cannot open /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 is not suitable for this array.


    mdadm --create /dev/md0 --level 1 --raid-devices 2 /dev/sdb1 missing --metadata=0.90 mdadm: super0.90 cannot open /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 is not suitable for this array. mdadm: create aborted Sometimes running "partprobe" can fix this. Other times it requires a reboot. One other manual thing that can be done is the following to fix it (if dm is using and blocking it):........
  • How To Install NextCloud on Centos 7 and Centos 8


    yum -y install wget unzip wget https://download.nextcloud.com/server/releases/nextcloud-18.0.2.zip unzip nextcloud-18.0.2.zip yum -y install php php-mysqlnd php-json php-zip php-dom php-xml php-libxml php-mbstring php-gd mysql mysql-server Last metadata expiration check: 0:58:02 ago on Fri 13 Mar 2020 02:12:49 PM EDT. Dependencies resolved. ===================================================================........
  • ZTE Camera Cannot Work unable to connect to camera. Camera has been disabled becaue of security policies or is being used by other apps


    unable to connect to camera. Camera has been disabled becaue of security policies or is being used by other apps They say to do a factory reset but in some cases it doesn't work and the camera mysteriously just won't work so it appears to be a hardware error if that happens.........
  • QEMU KVM how to boot off a physical CD/DVD/BDROM Drive


    It's as simple as below where you just specify the dev device of the CDROM which is usually /dev/sr0. You can boot actual bootable discs like Windows, Linux, etc straight from a physical drive this way. sudo qemu-system-x86_64 -cdrom /dev/sr0 -m 4096 ........
  • Ubuntu Debian Linux Cannot Install Wine Solution - wine1.6 : Depends: wine1.6-i386 (= 1:1.6.2-0ubuntu14.2) but it is not installable wine1.4 : Depends: wine1.6 but it is not going to be installed


    If you've ever gotten errors like this the solution is simple, you need i386 enabled on your 64-bit install because wine depends on some 32-bit x86 libraries: dpkg --add-architecture i386 apt update apt install wine After that it will install just fine. apt install wine Reading package lists... Done Building dependency tree Reading state information... Done........
  • How To Install python 3.4 3.5 and up on Linux with wine - Working Solution


    This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu! Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........
  • named bind errors - DNSKEY: unable to find a DNSKEY which verifies the DNSKEY RRset and also matches a trusted key for '.'


    Mar 22 13:46:14 box named[31767]: validating @0x7f51bc001550: . DNSKEY: unable to find a DNSKEY which verifies the DNSKEY RRset and also matches a trusted key for '.' Mar 22 13:46:14 box named[31767]: validating @0x7f51bc001550: . DNSKEY: please check the 'trusted-keys' for '.' in named.conf. Mar 22 13:46:14 box named[31767]: error (broken trust chain) resolving './NS/IN': 192.36.148.17#53 One possibility is sometimes that your time is ou........
  • Radeon R3 GPU on Debian Crashing


    Occasionally my whole screen locks up and I cannot even swith to the console and I find this in my syslog: *-display description: VGA compatible controller product: Mullins [Radeon R3 Graphics] vendor: Advanced Micro Devices, Inc. [AMD/ATI]  ........
  • Howto Set Static IP on boot in initramfs for dropbear or other purposes NFS, Linux, Debian, Ubuntu, CentOS


    This is only really necessary in the case you don't want DHCP. If you are dealing with an encrypted LUKS server on the internet, you will often want to have a static IP so you know which IP to connect to (or if you have a semi-static IP assigned by DHCP). SET IP Address by /etc/initramfs-tools/initramfs.conf IP Address=192.168.1.27 Gateway=192.168.1.1 Subnet Mask: 255.255.255.0 Hostname=myhome.com IP=192.1........
  • Convert and install to LUKS Encrypted Drive Ubuntu 18.04 19.10 Linux Mint and Debian Based Linux


    The reason for doing this is that the installer doesn't seem to work properly for LUKS and the server installer doesn't even support LUKS anymore. When you use the GUI install on Desktop for LUKS it won't boot and will just hang after you enter your password. So the only reliable way is to do it ourselves. 1.) Make a default minimal install of Ubuntu 2.) Have a secondary disk on the server or VM. 3.)........
  • CentOS 8 how to convert to a bootable mdadm RAID software array


    The cool thing here is that we only need 1 drive to make a RAID 10 or RAID 1 array, we just tell the Linux mdadm utility that the other drive is "missing" and we can then add our original drive to the array after booting into our new RAID array. Step#1 Install tools we need yum -y install mdadm rsync Step #2 Create your partitions on the drive that will be our RAID array Here I assume it is /dev........
  • ADATA USB Thumb Drive Issues


    This is the reason that I don't like the new ADATA USB drives such as the UV128/64GB or 128GB drives and other ones that look to be the same style (the green sliding USB connector). They just don't work well from new and never work properly at any point. [ 788.242463] usb 1-1.2: new high-speed USB device number 16 using ehci-pci [ 788.339816] usb 1-1.2: New USB device found, idVendor=125f, idProduct=db8a [ 7........
  • KMODE EXCEPTION NOT HANDLED - QEMU/KVM Won't Boot Windows 2016 or 10 Image or Physical Machine


    This should work but the key thing is having the "-cpu host" flag. Once you add the correct -cpu host flag then it should boot just fine on KVM. qemu-system-x86_64 --enable-kvm -cpu host -smp 8 -m 8192 -drive format=raw,file=the-file.img Examples can be found here on how to boot Windows properly with KVM.........
  • Linux Mint / Ubuntu / Debian Mate Disable Guest Session and Hide Usernames on Lightdm Login screen GUI


    sudo vi /etc/lightdm/lightdm.conf.d/70-linuxmint.conf Change this: [SeatDefaults] user-session=mate allow-guest=false To this: [SeatDefaults] user-session=mate allow-guest=false greeter-hide-users=true greeter-show-manual-login=true To see and apply your changes just restart light........
  • ssh how to connect using a SOCKS 5 proxy with nc and proxycommand


    This is not about using ssh as a proxy, but rather, using a proxy when you are SSHing to another host and using ProxyCommand (where we normally use nc as our proxy tool). In newer versions of nc the syntax has changed to the following: ssh -o ProxyCommand="nc -x 127.0.0.1:1234" %h %p user@host The format must be like above in newer nc versions. Just be sure to change the 1234 to the port of your SOC........
  • Enable AMDGPU Linux Driver in Debian Ubuntu mint


    To enable amdgpu we have to set special kernel boot parameters. The easiest way is to make it permanent and apply to all kernels (no messing around with grub.cfg) so we'll edit those defaults in /etc/default/grub by changing the GRUB_CMDLINE_LINUX_DEFAULT parameter. After that don't forget to run "update-grub"to apply it (otherwise amdgpu will never be enabled). Requirements No clue really as it really depends. But for example this........
  • apache symlinks denied even with followsymlinks


    Symbolic link not allowed or link target not accessible: /path/httpdocs/news.html There are a few reasons that can cause this message and this is for people who have ruled out the basics, eg. your symlinks are enabled and the right permissions are applied (but read on to learn about ownership requirements above the directory in question). So there are a few key things here that cause Apache not to follow symlinks:........
  • how to use ifplugd in Linux to execute a command or script when a NIC cable is unplugged or plugged in


    It is fairly simple to use once you know how to use it. However, the tricky thing is that by default it doesn't seem to be active or listen on any interface on manually specified. How To Install ifplugd First we install ifplugd sudo apt install ifplugd Let's enable it on our desired device(s) vi /etc/default/ifplugd set this line as so:........
  • mpv / mplayer with Radeon / AMD GPU Video Card Driver enable VDPAU GPU Accelerated Video Decoding


    The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration. Let's manually play with vdpau to make sure it works before we make it permanent: First make sure you have libvdpau installed: sudo apt install vdpau-driver-all If yo........
  • Ubuntu Linux Mint Debian xorg performance and tear-free tuning for AMD Radeon Based Cards


    I find that the default settings for the radeon driver that is applied to most AMD cards is horrible. For example by default TearFree is not enabled and it causes videos to have some kind of square artifacts. Here are the settings I have found most suitable for AMD cards: You need to create file in the following path and restart Xorg or your computer to apply it: *Beware that making a mistake here will possibly make your computer........
  • Centos 7 Stopped and Disabled Firewalld and ports still blocked


    This is a gotcha but be aware sometimes iptables may be active and loaded by default. Also make sure you don't just disable firewalld but also stop it otherwise it will still block stuff: systemctl stop firewalld If the above is not the issue then it is possible iptables is running and blocking stuff too, so you'll need to stop iptables. So in addition to opening firewalld or disabling it, you would need to disable iptables........
  • MariaDB / MySQL Reset Root Forgotten Password on Centos 7


    mysql reset root password. Oops I can't remember my MySQL root password! [root@centos7test etc]# mysql -u root -p Enter password: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) First we need to stop mariadb: systemctl stop mariadb Now we need to restart it with skip-grant-tables whic........
  • Ubuntu Debian Linux Mint r8169 r8168 Network Driver Problem and Solution


    This problem has been around forever, Linux seems to think it is fine to use the r8169 driver for an r8168 NIC but this often causes problems including the link not working at all. In my case ethttool shows the link up and detected but it simply does not work especially on a laptop that has been resumed from suspension. Sometimes it takes several minutes for it to work or to unplug and replug the ethernet. Here is the solution: Install th........
  • Linux 3D Performance benchmarks with glxgears 59-60fps solution


    You need to disable vsync like this when running glxgears: vblank_mode=0 glxgears For Nvidia drivers do this: __GL_SYNC_TO_VBLANK=0 glxgears Notice the higher than 59-60 fps results with vblank_mode=0: ATTENTION: default value of option vblank_mode overridden by environment. 7919 frames in 5.0 seconds = 1583.704 FPS 8187 frames in 5.0 seconds = 1637.266 FPS........
  • Linux Ubuntu Debian Centos How To Make a Bootable Windows 7, 8, 10, 2016, 2019 Server USB from ISO


    Use fdisk on your USB drive to create a bootable NTFS partition (in my case /dev/sdb): sudo fdisk /dev/sdb Welcome to fdisk (util-linux 2.27.1). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Command (m for help): n Partition type p primary (0 primary, 0 extended, 4 free)........
  • Linux Console Login Screen TTY Change Message


    This is all controlled by /etc/issue You can basically enter anything in there that you like, but there are preset variables that are mentioned at the end of the page that discuss this. Some examples of /etc/issue: Centos 7: S Kernel r on an m Ubuntu 16.04: Ubuntu 16.04.6 LTS n l You can also insert any of t........
  • CentOS 6 and 7 / RHEL Persistent DHCP Solution


    It is very silly but the default on the ifup-eth script tells dhclient ( the program that obtains a DHCP IPaddress if you have selected DHCPin your ifcfg-eth* config file) to EXIT / QUIT if the first attempt to obtain a lease fails. No amount of dhclient.conf settings will fix this because if dhclient is started with -1 (which it is by default)then dhclient will quit. This is obviously very bad for MOST cases. Say for example you have a power outage or........
  • Debian Ubuntu Mint rc-local service startup error solution rc-local.service: Failed at step EXEC spawning /etc/rc.local: Exec format error


    Oct 18 11:06:46 server systemd[529]: rc-local.service: Failed at step EXEC spawning /etc/rc.local: Exec format error Oct 18 11:06:46 server systemd[1]: rc-local.service: Control process exited, code=exited status=203 Oct 18 11:06:46 server systemd[1]: Failed to start /etc/rc.local Compatibility. Oct 18 11:06:46 server systemd[1]: rc-local.service: Unit entered failed state. Oct 18 11:06:46 server systemd[1]: rc-local.service: Failed with result 'exit-code'.........
  • MySQL Cheatsheet Guide and Tutorial


    Create Database: create database yourdbname; Show All Databases: show databases; Change Database: use mysql; Drop / Delete a MySQL Database: drop database nameofyourdatabase;........
  • Linux tftp listens on all interfaces and IPs by DEFAULT Security Risk Hole Solution


    Just edit your tftp file for xinetd like this: *Change the IPto be the IPof the interface you want to listen on. To test if your tftp is available on a certain IP range use nc -u yourip 69 to see if you can still connect (/var/log/messages or /var/log/syslog) should show the connection if it is open. Oct 13 23:20:34 01 xinetd[26631]: Started working: 1 available servic........
  • Cisco Unified Communications Manager Express Cheatsheet CUCME CME Tutorial Guide


    Video Links: How To Setup 2 Phones on a Single CME Router and get the GUI going. How to use Dialpeers with CME with two routers How to implement call restrictions using COR / Class of Restriction Getting started, let's enable ephones and DNs we can add a phone with........
  • Linux Ubuntu Debian Missing privilege separation directory: /var/run/sshd


    service sshd status ● ssh.service - OpenBSD Secure Shell server Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enabled) Active: failed (Result: start-limit-hit) since Wed 2019-10-02 11:07:54 EDT; 36s ago Process: 476 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=255) Oct 02 11:07:54 box systemd[1]: Failed to start OpenBSD Secure Shell server. Oct 02 11:07:54 box sys........
  • bash if statement how to test program output without assigning to variable


    A common method in bash is to assign output to a variable like this: somevar=`uptime` That works too but it could be more efficient to do something like this: if [[ $(uptime|awk '{print $3}') > 20 ]]; then echo "uptime greater than 20 days"; fi........
  • RTNETLINK answers: Network is unreachable


    This often happens if you are adding a secondary route, especially with Linux source based routing. ip route add default via 10.10.10.254 table 10 RTNETLINK answers: Network is unreachable If that happens you will probably find that it is unreachable because your NIC does not have an IP in the 10.10.10.0/24 range so just assign an IP in that range to your NIC and try again. eg. ifconfig eth0 10.10.10.254 netmask 255.255.255.0 up........
  • Centos 7 how to save iptables rules like Centos 6


    yum install iptables-services systemctl enable iptables service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ]........
  • qemu-kvm error "Could not initialize SDL(No available video device) - exiting"


    Now older versions of qemu-kvm didn't throw this error say if you just had "-video cirrus" when starting qemu-kvm. But newer versions do care. And this probably only applies to you if you are running from bash/terminal with remote kvm images. What you need to do is remove the "-video" part and just add -vnc :5 eg. this would fix the error: qemu-system-x86_64 -enable-kvm -boot order=cd,once=dc -m 1024 -drive........
  • Centos 7 tftpd will not work with selinux enabled


    In Centos 7 tftpd will not work with selinux. Clients will not be able to connect and this is all you'll see in the log (then nothing more): Sep 18 14:39:15 localhost xinetd[4327]: START: tftp pid=4331 from=192.168.1.65 On the client/computer side you will see this: TFTP. PXE-M0F: Exiting Intel Boot Agent Basically the client is being instantly connected and bloc........
  • Debian Ubuntu Mint Howto Create Bridge (br0)


    Having a network bridge allows you to bridge traffic under multiple devices so they can talk natively without using any special routing, iptables/firewall or other trickery. To create your bridge you need the bridge-utils package for brctl and if you want to do things like bridge VMs that run on a tap device you will need the uml-utilities which provides "tunctl". 1.) Install the utilities to make our bridge sudo apt-get i........
  • LUKS unable to type password to unlock during boot on Debian, Ubuntu and Mint


    I think this is more so an issue with kernel modules not being included. I had this issue on Linux Mint because a new kernel I upgraded to DIDNOT have the "extra" modules and part of that reason is also because older kernels are named differently than new ones. Take this example article below that shows it in action. If you were previously........
  • Debian Ubuntu and Linux Mint Broken Kernel After Date - New Extra Module Naming Convention


    I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules. One other weird thing is that sometimes........
  • Apache htaccess and mod_rewrite how to redirect and force all URLs and visitors to the SSL / HTTPS version


    It is really simple using .htaccess with mod_rewrite. Here is all you need: RewriteCond %{SERVER_PORT} 80 RewriteRule ^(.*)$ https://site.com/$1 [R=301,L] Another more graceful way is to use the %{SERVER_NAME}variable to make it dynamic. Just be careful that the server name will always match what you expect. (eg. if you are doing load balancing or clustering what if the server name may be somethi........
  • Virtualbox vbox not starting


    If you've just installed VBox and it is not starting or working, the most common problem is usually that you don't have your kernel source installed, which means there is no kernel driver for vbox so it can't work. You may get an error that says "Kernel driver not installed" in your Virtualbox. So the first thing you should do is install your kernel source by running this: sudo apt-get install linux-headers-`uname -r`........
  • Linux Mint Mate Customize the Lock screen messages and hide username and real name


    This is a security hole in my opinion and should be plugged by editing the lock screen ui layout: vi /usr/share/mate-screensaver/lock-dialog-default.ui #find these objects and set the visible property to false object class="GtkLabel" id="note-tab-label" object class="GtkLabel" id="auth-username-label> object class="GtkLabel" id="auth-realname-label"........
  • ssh how to verify your host key / avoid MIM attacks


    SSH helps keep us secure in many ways, one of those is the host-key fingerprint which is unique. If you have been connecting to an SSH server that you've made no changes to and suddenly ssh warns that the key doesn't match then you have a problem. But how about connecting to an existing server for the first time on a new machine or client? A lot of new clients calculate it using an SHA256 hash but it is not as easy on your host machine to produce the sam........
  • Linux Mint 18 Disable User Name List from showing on Login Screen


    Click "Administration" ->"Login Window"........
  • Cisco Unified Communications Manager / CUCM IP 8.6,10,12 Install Error Solution


    Install Errors on Version 12: This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5 on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error. *Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install. What really causes this even though you successfully install........
  • Ubuntu Debian Mint Linux SSHD OpenSSH Server Not Starting After Reboot Solution


    If you get error messages like this it is usually because /var/run/sshd does not exist. root@userbox:/# service sshd status ● ssh.service - OpenBSD Secure Shell server Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enab Active: failed (Result: start-limit-hit) since Wed 2019-04-10 02:24:44 EDT; 1 Process: 511 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=255)........
  • Cisco Unified Communications Manager 12 Install Errors on Proxmox/KVM


    The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs. qemu-kvm command: /usr/libexec/qemu-kvm -version QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard ........
  • Cisco Unified Communications Manager 12 CUCM 12 - How To Enable Video Calling


    There are multiple layers but most are enabled by default such as the setting in the Phone Device Settings. However the one not enabled by default is the one in "Enterprise Phone Configuration". Enable "Cisco Camera" and then reboot your phones to enable it.........
  • Windows 7, 8, 10, Windows Server 2008, 2012, 2016, 2019 How To AC97 Audio Drivers and Other Unsigned Drivers


    Oops did you get this error trying to install an oldschool driver and think it is hopeless in a new version of Windows? First of all it is almost never a program compatibility issue: ........
  • Linux qemu-kvm How To Enable Soundcard in Guestl


    Pass QEMU this flag: -soundhw ac97 Or you could use (for a Ensoniq soundcard): -soundhw es1370 However on some machines I get this error: pulseaudio: pa_simple_new for capture failed pulseaudio: Reason: Connection terminated pulseaudio: pa_simple_new for capture failed pulseaudio: Reason: Connection terminated audio: Failed to create voice `ac9........
  • QEMU-KVM Windows and Server Guest Installs Mouse Tracking Pointer Location Solution


    You may have noticed if you are running QEMU/KVMmanually that in Windows the the position of the physical mouse does not match where the mouse is positioned within Windows. There is an easy command to pass to qemu-kvm or qemu-system (whatever you call your binary): -usbdevice tablet The above flag will fix your mouse pointing problems whether you are running Windows 95, 98, NT, XP 2000, 2003, Vista, 7, 8 10 or Server 2000, 2003, 2008, 2012, 2016 or 2........
  • Linux How To Disable SATA NCQ For Better Performance


    This is the closest way to disabling it without using the "libata.force=noncq" kernel boot option is to set the queue to a depth of 1 which doesn't actually disable it. Change the sdc below to match the device you want to disable NCQ for. [root@officebox ~]# echo "1" > /sys/block/sdc/device/queue_depth Errors that indicate you are having a performance issue are these in messages or dmesg relating to N........
  • WebRTC Vulnerability Shows Local IP Address Even When Using a Proxy or VPN Firefox Fix And Disable Solution


    If you visit a site that exploits the WebRTC vulnerability including whatismyipaddress.com it may show "Local IP Address" which would be the real IP of your machine. The vulnerability works on Windows and Linux machines (contrary to false information on the web which claims it only affects Windows). The above works and happens even if you are using a proxy or VPNaccount like ProVPNAccounts.com It is easy........
  • chroot in Linux Howto Simple and Easy Guide


    chroot which stands for change root allows you to virtually operate in another operating system even though you haven't booted it. It is commonly used to deploy new distros, applications and to fix a broken Linux/Unix install or prep a new system image without having to physically boot the drive or disk. So in this example let's say we have a drive that has a Linux OS installed on /dev/sdb1 and we have mounted this partition on /mnt/sdb1 The key point is to edit the &quo........
  • ssh reverse proxy to enable remote access behind a LAN and firewall


    So say you are behind a typical NAT/LAN setup whether at home, work or while travelling. What if you have a computer or server that you need to connect to from the outside? Yes you could use a VPN but a quick and dirty, temporary and secure way is to use SSH's Reverse Tunneling Proxy feature. Requirements On the remote ssh server host you need the GatewayPorts option enabled in sshd_config (be........
  • Cisco Router Setup Guide and Tutorial Howto With Commands and Examples


    In most of the Cisco router IOS I find the ports like ge0/0 ge0/1 and ge0/2 or whatever your ports are down. They will not even give you a link light. So one of the first tasks should be getting the port you are working with up. In my case the first goal is often connectivity with the LAN and WAN. LAN = your local area network (eg. in the office/home ) WAN= your ISP/public internet (eg. fiber/cable/dsl/ethernet).........
  • Cisco DHCP Snooping Relay Setup Information


    Switch#show ip dhcp snooping Switch DHCP snooping is disabled DHCP snooping is configured on following VLANs: 1 Insertion of option 82 is enabled circuit-id format: vlan-mod-port remote-id format: MAC Option 82 on untrusted port is not allowed Verification of hwaddr field is enabled Interface&nb........
  • Cisco Switch Setup Guide Command List


    Enter configuration console: enable configure terminal This is important because if your console doesn't look like below none of the commands will work! Switch(config)# Save and Apply Settings wr Show Switch Configuration: show run Show Port List/Sta........
  • Cisco Switch Reset To Factory Defaults


    This works on the 2000 and 3000 series generally. *The easy way is to just hold the mode button for 10+ seconds. The full/proper way is below: 1.) Either power on the unit and hold the "mode" button or hold the "mode" button until you see the below: 00:04:08: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram 00:04:08: %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configur........
  • How To Boot Cisco CUCM UCSInstall 8.6, 10, 11 and 12 on KVM/Proxmox


    The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported. Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........
  • Windows Server 2012, 2016, 2019 How To Install and Missing Disabled Telnet Client


    By default telnet is not enabled or installed on the latest Windows servers so you'll get an error saying: telnet is not recognized as an internal or external command dism /online /Enable-Feature /FeatureName:TelnetClient ........
  • proxmox vm networking breaks when you restart your network on the hostnode


    Idid a systemctl restart networking and it broke Proxmox VM connectivity! #proxmox is the problem after restarting the network the tap devices go to disabled state [2230884.919905] vmbr0: port 7(tap118i0) entered disabled state [2230884.948864] vmbr0: port 8(tap122i0) entered disabled state [2230884.972748] vmbr0: port 6(tap119i0) entered disabled state [2230885.004745] vmbr0: port 5(tap117i0) entered disabled state [2230885.03673........
  • LUKS Hard Drive Encryption on Linux Mint Ubuntu Debian etc how to mount encrypted hard drive


    The key thing here is to know the actual partition that is encrypted. Often in Linux Mint's installer that ends up being partition 5 or /dev/sda5 sudo cryptsetup luksOpen /dev/sda5 anynamehere You will then be prompted for your irrecoverable passphrase: Enter passphrase for /dev/sda5: If all goes well it won't say anything further. If it says ""No key available with this passphr........
  • Linux Mint 18.2 Create Config File To Start Application Upon Login


    This is not about systemd/systemctl and not about "onboot" so there's no rc.local trick here but it's the GUI/Gnome etc when a user logs in that a command is launched. Put this in your home dir The .config/autostart directory is where Linux Mint/Ubuntu checks for autostart application config files mkdir -p ~/.config/autostart Create a new entry/file that starts an application........
  • letsencrypt certbot error "Unable to find a virtual host listening on port 80 which is currently needed for Certbot to prove to the CA that you control your domain. Please add a virtual host for port 80."


    ./certbot-auto --apache certonly Saving debug log to /var/log/letsencrypt/letsencrypt.log Plugins selected: Authenticator apache, Installer apache No names were found in your configuration files. Please enter in your domain name(s) (comma and/or space separated) (Enter 'c' to cancel): yourdomain.com Obtaining a new certificate Performing the following challenges: http-01 challenge for yourdomain.com Cleaning........
  • SSH error cannot Forward or Listen "bind: Cannot assign requested address"


    debug1: Local connections to LOCALHOST:18006 forwarded to remote address 192.168.1.93:8006 debug1: Local forwarding listening on 127.0.0.1 port 18006. debug1: channel 0: new [port listener] debug1: Local forwarding listening on ::1 port 18006. bind: Cannot assign requested address What we are seeing is that we can't listen on an IPV6 address of ::1. We need to tell SSH to stop using IPV6 so we'll edit ssh_config to take care of this issue........
  • Thunderbird How To Disable An Email Account


    Navigate to Tools -> Account Settings -> Server Settings Uncheck the following: "Check for new messages on startup" "Check for new messages every NN minutes" "Automatically download new messages". Source: http://forums.mozillazine.org/viewtopic.php?t=635510........
  • iptables linux firewall recommended rules for public computing


    Whether you are at work, at the coffee shop or on the public internet here are some basic but effective rules for iptables that lock things down (eg. no one can SMB or SSH to you or really anything): # Generated by iptables-save v1.4.21 on Fri Dec 14 14:00:08 2018 *nat :PREROUTING ACCEPT [160:19844] :INPUT ACCEPT [4:357] :OUTPUT ACCEPT [2955:182236] :POSTROUTING ACCEPT [2955:182236] COMMIT # Completed on Fri Dec 14........
  • VMWare Pro Workstation Nic Disconnected and No IP Using NAT


    By default VMWare Workstation often doesn't work as we would like. If you create a VM with a default NAT IP it won't work you will find the NIC is disconnected (even though on the VMWare side it says connected including at Power On). How To Solve It 1.) Create New VMNet for NAT Click "Edit" -> "Virtual Network Editor" Click "Add Network" Select Network To Add "VMNet1" (........
  • Proxmox Breaks Storage/LVM Backing If Killing QEMU-IMG


    I tried to stop a qemu-img copy or clone and it broke everything. It was fine to "stop" it from the GUI but a process still persisted so I killed the relevant qemu-img and the kernel went crazy. It also may not have helped that I tried to lvremove a different volume (an unused disk). But either way it breaks LVM (you cannot even run lvdisplay) so a reboot is necessary. Jan 17 06:45:21 testserver kernel: [ 5680.439337] systemd-udevd D 0&nbs........
  • Debian 9 SSH root password authentication failure password not working problem / solution


    In Debian a lot of times SSH disables the root user to login by password by default. This means you will get an authentication failure as if you typed in the wrong password. The logs also indicate the password is wrong but what is often the case is in the config file Check /etc/ssh/sshd_config cat /etc/ssh/sshd_config|grep -i permitrootlogin Make sure it says: PermitRootLogin yes If not change it and restart SSH........
  • /etc/iproute2/rt_tables default settings file in Linux Centos 6,7 and most other NIX's


    This should apply to most Linux distributions just incase you get into trouble or wipe out the defaults by accident. /etc/iproute2/rt_tables # # reserved values # 255 local 254 main 253 default 0 unspec # # local # #1 inr.ruhep........
  • bind named error solutions named[2169]: error (no valid DS) resolving / error (broken trust chain) resolving / : error (no valid RRSIG) resolving 'com/DS/IN':


    Below are the common errors you'll get with named AKA bind if your time is incorrect. The simplest solution is to install and run ntpd to correct your system's time (install ntpd if it is not installed) systemctl start ntpd systemctl enable ntpd Dec 20 13:36:16 hostingbox named[2169]: error (no valid DS) resolving 'develop.waxrain.com/A/IN': 14.215.150.17#53........
  • iptables how to log ALL dropped incoming packets


    A lot of people just have a -j DROP to drop all unwanted traffic or traffic not explicitly allowed but there is a better solution if you want real and proper logging: Here is another example of more advanced iptables rules. Take an example iptables rules file -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p icmp -j ACCEPT........
  • Linux Disable IPV6 Centos / Debian / Mint Howto


    Set this in /etc/sysctl.conf net.ipv6.conf.all.disable_ipv6 = 1 #apply the settings sudo sysctl -p ........
  • DRBD Errors Caused By Physical Corruption


    In a RAID array I had a have periodically lost a drive here and there over the past several months. Iwas always able to readd and resync without losing data. However at some point it looks like some minor corruption happened and this makes DRBD unhappy. Using fsck did not help either. Dec 19 06:01:45 storageboxtest4 kernel: [19005.945890] EXT3-fs error (device drbd0): ext3_get_inode_loc: unable to read inode block - inode=22184379........
  • Centos 6 / 7 / 8 How To Change Default nameservers in /etc/resolv.conf when using DHCP / dhclient


    First we need to create dhclient.conf if it doesn't exist or edit it: vi /etc/dhclient/dhclient.conf #add this line at the top add the IPs as commas they will be the highest priority nameservers and whatever your ISP gives you will be used after these one (good for DNS backup) prepend domain-name-servers 127.0.0.1,10.10.25.8; After you restart your network or run dhclient again you should see the contents of........
  • Adobe Acrobat Reader for Linux to use and view XFA Fillable Forms


    The reason for not being able to read one of these dreaded/ fillable "XFA" forms is because no Linux PDF reader that I'm aware of supports them. Part of this reasoning is for security. It is really silly, they should ban these XFA forms or at least replace the Please Wait with the non-fillable version. Download Adobe Reader 9.5 for Linux from here: This is the solution but only so much, at least for me I was able to view th........
  • Debian Linux Mint Ubuntu iptables save and restore settings automatically onboot and reboot


    First you need the "iptables-persistent" package. This gives you an init script that loads your settings from /etc/iptables/rules.v4 and rules.v6 When you install it, it wll save your default setings in /etc/iptables. sudo apt-get install iptables-persistent Remember that the rules are stored here: For IPV4: /etc/iptables/rules.v4 For IPV6: /etc/iptables/r........
  • Why SMART is not smart at all and doesn't properly predict disk errors that cause a kernel panic or crash


    Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated. It has caused a kernel panic and system crash repeatedly as we can see from the logs. But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector. Any time I have had anything but 0 for that attribute it........
  • bash scripting how to create a function


    function centos7 { release=`cat /etc/redhat-release|awk '{print $4}'|grep ^[7]` if [ "$release" != "" ]; then centos7='yes' fi } centos7 echo "$centos7" We create a function called "centos7" and then call it by just typing "centos7" We then access a variable that may be set........
  • Centos 7 PHP MySQL Not Working Solution


    PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/pdo_mysql.so' - /usr/lib64/php/modules/pdo_mysql.so: symbol mysql_options, version libmysqlclient_18 not defined in file libmysqlclient.so.18 with link time reference in Unknown on line 0 #not sure what is wrong with php-mysql but I removed it and installed mysqlnd yum -y remove php-mysql yum -y install php-mysqlnd........
  • Bash How To Cut or Split Natively And Get The LAST Field


    This takes "yourvariable" and splits it based on the last character in this case "-" and shows the last field of that split. ${yourvariable##*-} ........
  • Bash Script How To Manipulate Text/Strings By Searchig and Replacing Natively


    # a single first slash means first occurrence # format=${haystack/needle/replacement} # if you use a double first slash it means ALL occurrences # format=${haystack//needle/replacement} email=${file/.txt-marked/} In the example above we are searching in the variable $file for ".txt-marked" and replacing with nothing (the empty part after the last / means we are replacing with n........
  • How Does Cisco CUCM (Cisco Unified Communication Manager) Work?


    Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments. Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........
  • syntax error, unexpected T_SL in PHP Solution


    This happened in a PHPscript with heredoc but it could really happen anywhere. The issue was whitespace in code like this: $variable = ........
  • systemd management using systemctl and journalctl to check systemd logs


    systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system. The key commands or arguments you will use with systemctl are the following: Unit Commands: list-units [PATTERN...] List loaded units &nbs........
  • css br with extra blank line


    The problem I was having is that a css template Iwas using was causing br's to have an empty line in between which is very undesirable especially when displaying code. br { display:none; margin: 0px; height: 0px; } Using CSS code like above will fix it. You technically shouldn't need the margin or height either.........
  • Linux What is umask (user mask) for file and directory creation permissions and how to calculate umask and change the defaults


    umask are the default permissions that are applied when a file or directory are created. To see this in action simply just "touch filename" or "mkdir somedir" and you'll see what default permissions are applied. The first thing Ialways tell people you should know is to NEVER change the defaults unless you are making them more restrictive. But they work well and if you change the defaults you could end up creating a file without permission to read........
  • AMD Set Fan Speed and Other Powerplay Memory/CPU Timings with a Linux script


    You can do other things but this particular script is just to set all AMD cards to 80% fan speed (remember this script needs to applied everytime you reboot). You could set it is a cron or just throw it into /etc/rc.local basepath=/sys/class/drm for hwmon in `ls -1 /sys/class/drm|grep card[0-99]$`; do echo card=$hwmon; hwmonname=`ls $basepath/$hwmon/device/hwmon|grep hwmon[0-99]` hwmonpath=$basepath/$hwmon/device/hwmon/$hwmonname echo "ec........
  • genisoimage errors with long filenames and deep directory structures


    You'll have to violate the iso9660 standards but it is necessary if you want to preserve your filesystem and filenames and shouldn't be an issue as long as you are using a modern OS like Linux. genisoimage -o Backup-Myfiles.iso -r -J -joliet-long /some/path/ You will get errors like below (even enabling joliet-long didn't help) genisoimage: Error: /some/filename.pdf have the same Joliet name Joliet tree sort failed. The -joliet-lo........
  • How to download gajim 0.16.9 XMPP/Jabber client so you can use OMEMO encryption


    #Linux Mint 18.2 how to install gajim .16.9 so you can use OMEMO encryption: sudo apt-get install python-axolotl python-nbxmpp wget https://gajim.org/downloads/0.16/gajim-0.16.9.tar.gz tar -zxvf gajim-0.16.9.tar.gz cd gajim-0.16.9 ./autogen.sh ;make;sudo make install #if you get this error you need to get a newer python-nbxmpp from here: gajim Gajim needs python-nbxmpp >= 0.6.1 to run. Quiting...........
  • HP DL385 G7 Linux BIOS Update Flash


    wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe --2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85 Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1525561 (1.5........
  • hwloc-nox set CPU affinity in Linux


    sudo apt-get install hwloc-nox Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: hwloc-nox 0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded. Need to get 151 kB of archives. After this operation, 453 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubunt........
  • MySQL change for Antelope format to Barracuda error solution


    Your database uses Antelope as the file format. Full UTF-8 support in MySQL and MariaDB requires the Barracuda file format. Please switch to the Barracuda file format. See the documentation MySQL full unicode support for details. In /etc/my.cnf under [mysqld] 180827 21:43:14 InnoDB: 5.5.59 started; log sequence number 1589339 180827 21:43:14 [ERROR] /usr/libexec/mysqld: unknown variable 'db_file_format=Ba........
  • vmkping -I vmk1 10.0.2.69 PING 10.0.2.69 (10.0.2.69): 56 data bytes sendto() failed (Host is down)


    [root@localhost:~] vmkping -I vmk1 10.0.2.69 PING 10.0.2.69 (10.0.2.69): 56 data bytes sendto() failed (Host is down) vsphere distributed switch vmotion not working [root@localhost:~] esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface&........
  • VMWare vSphere 6.7 Errors Solution 503 Service Unavailable (Failed to connect to endpoint:


    503 Service Unavailable (Failed to connect to endpoint: [N7Vmacore4Http20NamedPipeServiceSpecE:0x00005556ba09c070] _serverNamespace = / action = Allow _pipeName =/var/run/vmware/vpxd-webserver-pipe) 503 Service Unavailable (Failed to connect to endpoint: [N7Vmacore4Http16LocalServiceSpecE:0x00007fd26000b240] _serverNamespace = /ui action = Allow _port = 5090) Errors like the above are usually because there is an issue with your vSphere or more commonly it i........
  • How To Enable Nested KVM so guests can virtualize with hardware extensions


    How to check if nested KVM is enabled by doing a cat on nested inside sys Nested KVM is mainly important for testing for example if you wanted to install VMWare or Proxmox Nodes in a virtual environment for testing. Without nesting, the performance will be extremely slow, since the VMs within the nodes will not be using Virtualization extensions. I've used wildcard on kvm_ because it could be kvm_intel or kvm_amd depending on whether y........
  • Supermicro IPMI / KVM / BMC Remote Console Screen Resizing Issue - Window Cut Off Solution


    It could just be my specific Java but other KVM/IP works ok on my machine but with Supermicro's IPMI for some reason the console window doesn't resize and even putting it in full screen leaves the window cut off as shown below: As you can see above the screen is cut off you can't see the "Iagree" on the right side. The window resi........
  • PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0


    PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0 Solution: Edit geoip.ini vi /etc/php.d/geoip.ini Comment out the .so like so: ;extension=geoip.so service httpd restart........
  • prosody xmpp server "Failed in all attempts to connect to proxy.eu.jabber.org"


    Aug 13 13:46:33 s2sout2d45040 info Failed in all attempts to connect to proxy.eu.jabber.org Aug 13 13:46:33 s2sout2d45040 info Sending error replies for 1 queued stanzas because of failed outgoing connection to proxy.eu.jabber.org No clue why it tries to use a proxy not explicitly specified. This could be because the proxy specified for the domain fails when someone is trying to se........
  • VMWare Vsphere VCSA Graphical Install Creates json


    yes it does create its own json ============================================ cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json 2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1 --> ........
  • Debian Mint Ubuntu compiling xmr-stak


    sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3 sudo apt-get install libcurl4-gnutls-dev git clone https://github.com/wolf9466/cpuminer-multi sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev git clone https://github.com/fireice-uk/xmr-stak-cpu.git make install cd bin chmod +x xmr-stak-cpu ./xmr-stak -O xmr........
  • [warn] VirtualHost 10.2.5.101:443 overlaps with VirtualHost 10.2.5.101:443, the first has precedence, perhaps you need a NameVirtualHost directive


    [root@thetor2017 conf]# service httpd restart Stopping httpd: [ OK ] Starting httpd: WARNING: MaxClients of 3000 exceeds ServerLimit value of 300 servers, lowering MaxClients to 300. To increase........
  • Centos 7 - How To Install NFS and Mount Remotely


    Server Side Config 1.) First install nfs-utils yum -y install nfs-utils 2.) Configure nfs share Create a directory for your NFS share mkdir /datastore Create your NFS share in /etc/exports echo "/datastore 10.220.101.0/24(rw,sync,no_root_squash)" >> /etc/exports systemctl restart nfs........
  • wodim / cdrecord error cannot burn DVD or BDR .iso Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error


    dvd+rw-mediainfo /dev/sr0 INQUIRY: [ASUS ][BW-16D1HT ][3.00] GET [CURRENT] CONFIGURATION: Mounted Media: 11h, DVD-R Sequential Media ID: RITEKF1&n........
  • iptables guide and examples and howto


    iptables allow port 22 example Of course change --dport and -s to suit your needs #allow certain IP to access port 22 iptables -A INPUT -p tcp -m tcp --dport 22 -s 192.168.1.0/24 -j ACCEPT # block others iptables -A INPUT -p tcp --dport 22 -j DROP........
  • How to qemu-kvm enable bridged networking in Debian Ubuntu Linux Mint on KVM containers


    I've read a few guides about this but they didn't work for me. sudo apt-get install bridge-utils #don't think the above is enough it won't work still even though you have by default an /etc/qemu-ifup that handles it if you have the right tools and setup sudo qemu-system-x86_64 -net tap -net nic -enable-kvm -cpu host,vmx=on ~/VirtualBox VMs/vsphere-vcenter/vsphere-vcenter.vdi W: /etc/qemu-ifup: no bridge for guest interface foun........
  • VirtualBox Nested Virtual Machine Containers with KVM Not Working no SVM or VMX module in the guest


    I can't get vmx cpu extensions to show up in Virtualbox guests despite enabling nested paging and enable vmx in virtualbox guest but this doesn't help that you check VT-X or the AMD Virtualization SVM it enables it for the guest to use BUT does not pass it through. This means if you check cat /proc/cpuinfo in the guest you will see the CPUdoesn't support virtualization. It looks like VirtualBox still hasn't implemented this! But there is good news I&n........
  • VSphere InternalServerError - Error When Adding Permissions


    InternalServerError (com.vmware.vapi.std.errors.internal_server_error) => { messages = [LocalizableMessage (com.vmware.vapi.std.localizable_message) => { id = vapi.bindings.method.impl.unexpected, defaultMessage = Provider method implementation threw unexpected exception: com.vmware.vapi.std.errors.InternalServerError, args = [com.vmware.vapi.std.errors.InternalServerError] }], data = } I was getting the........
  • OVF Tool: Error: Task failed on server: This host does not support Intel VT-x. VMWare VCenter install On ESXi ERror


    Intel VT-X is enabled in Virtualbox but it doesn't seem to pass through the needed vmx extension despite the following variables on the host confirming it is enabled: cat /sys/module/kvm_intel/parameters/nested Y cat /sys/module/kvm_intel/parameters/ept Y OVF Tool: Disk progress: 99% OVF Tool: Transfer Completed OVF Tool: Powering on VM: Embedded-vCenter-Server-Appliance- OVF Tool: Task p........
  • Install NFS (Network File System) On Debian Linux Ubuntu Mint Howto


    sudo apt-get install nfs-kernel-server #oops there are no exports so it won't startsudo /etc/init.d/nfs-kernel-server start* Not starting NFS kernel daemon: no exports. #we will use the /tmp/nfstestshare directory for our NFS share mkdir /tmp/nfstestshare #add it to /etc/exports (basically what NFS checks to determine what to make an NFS share) /tmp/nfstestshare 192.168.1.5(rw,sync,........
  • Relocating modules and starting up the kernel - VMWare ESXi 6.7 Error and Solution


    I had this error in an unsupported CPUon VMWare 6.7 and apparently this sometimes works especially on older VMWare versions like 6.5 5.5 etc (but in my case it did not). To make sure it proceed when you see "Loading VMWare" Hit "Shift+O" Then add "ignoreHeadless=TRUE" See an example below:........
  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
  • OpenVPN auth-user-pass-verify ENV script error


    Starting with newer versions of OpenVPN Ibelieve 2.2+ you need to have "script-security 3" set or you can't execute a third party script. Prior to that you could also use the auth-user-pass-verify like this: auth-user-pass-verify ./validate.pl "$username $password $ip" via-env Options error: the --auth-user-pass-verify directive should have at most 2 parameters. To pass a list of arguments as one of the paramete........
  • postfix errors fatal: no SASL authentication mechanisms /usr/libexec/postfix/smtpd: bad command startup -- throttling solution


    Jul 3 22:12:17mailserver postfix/smtpd[6195]: fatal: no SASL authentication mechanisms Jul 3 22:12:18mailserver postfix/master[4881]: warning: process /usr/libexec/postfix/smtpd pid 6195 exit status 1 Jul 3 22:12:18mailserver postfix/master[4881]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling This only ever happens in my experience when the authentication method is actually Dovecot. Usually the problem........
  • No comments are allowed here Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request.


    Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.15 (CentOS) Server at testdomain.com Port 80........
  • Linux Mint Black Screen after boot no graphics solution


    This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help. Here is the short end of the stick that fixed it: sudo apt-get install mdm mate-desktop-environment Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........
  • Centos PXEBoot NetInstall Failure - Pane is dead


    ValueError: new value non-existent xfs filesystem is not valid as a default fs type Pane is dead From what Iread this is misleading and has to do with the fact that the initrd and kernel are mismatched. This is a hard situation because for some older hardware Iam using the Centos Plus kernel which has modules that Irequire for an older server/NIC. This seems to have cropped up in the past few months and there is no simple fix........
  • Intel NUC J3455 Linux Kernel freeze slowness 4.4.98 errors


    It looks like this has something to do with APIC but I am not sure. I have similar CPUs with a different MB and BIOS that work fine on the same type of kernel. A lot of time the issue is because of the C-step setting in the BIOS. The same thing happened on the 2.6 kernel with Centos 6 but this is a homebrew 4.4 kernel soI am not sure why it is happening when even Centos 7 (3.2) kernel works OK. Solution - It comes down to the BIOS set........
  • How To Turn Any .iso file into a bootable USB drive


    This works for almost all ISO's Ifind (at least Linux based): sudo dd if=CentOS-6.9-x86_64-minimal.iso of=/dev/sdg bs=20M 20+1 records in 20+1 records out 427819008 bytes (428 MB) copied, 118.233 s, 3.6 MB/s Of course change the .iso filename above and the /dev/sdg to your desired USB drive!........
  • Linux Mint Ubuntu Debian How To Disable Webcam Automatically Onboot To Prevent Spying and Privacy Violations


    It is well known hackers, the NSA, CIA and other groups have created malware to secretly turn on your webcam and microphone on your phone, tv etc.. But fortunately on our computers and laptops we have some options. Most webcams use the "uvcvideo" kernel module / driver. You can disable this in two ways on boot. I recommend both just as a failsafe. Disable it on rc.local once your system boots automatically Add the followi........
  • IcedTea Java Web Viewer Config Utility How To Enter


    In at least Ubuntu and Mint there is nothing intuitive about configuring Java. Execute it to get to it: itweb-settings You'll be able to configure different options and variables. You can also check under Security as some of those settings could prevent applets from starting or prompting to........
  • Debian Linux Mint Ubuntu Disable Automatic apt-get update


    sudo chmod 000 /etc/cron.daily/apt-compat This is the easiest way to disable the cron without anything more invasive like deleting the file. After that you won't have anymore apt-get's starting. This can be critical for systems without much extra RAMthat is not in use. I've seen systems that have swapped and crashed over apt-get.........
  • How To Install Seamonkey Web Browser on Debian Ubuntu Linux Mint


    You can download the latest Sea Monkey releases here and 64-bit issues are a thing of the past now: It's a little tricky if you are running a 64-bit OS which most people will be. The weird thing is that the Seamonkey website for Linux seems to only provide a 32-bit download. seamonkey-2.49.2.tar.bz2 Seamonkey is still provided as a tar.bz2 which you need to extract and run manually. First........
  • Prevent SSH Bruteforce and Hacks By Disabling Password Authentication


    One simple way to keep your server public but almost impossible to hack via SSHis to disable password authentication over SSH. This means the only way in is via your own private key that only you should have. Edit your /etc/ssh/sshd.conf file Set this option PasswordAuthentication no Restart your SSH server. service sshd restart ........
  • solution mysqldump: Got error: 1044: Access denied for user 'user'@'localhost' to database 'thedb' when using LOCK TABLES


    It is simple the user just needs to be given the "LOCK TABLES" privilege. As root run this command: GRANT LOCK TABLES ON yourdatabase.* TO yourmysqluser@localhost;........
  • Apache htaccess Custom ErrorDocument not working properly for root home page 403 Error Issue and Solution


    So I have a domain "testdomain.com". Inside test domain.com's root is the following .htaccess: Options +FollowSymLinks -Indexes ErrorDocument 403 /launch/index.html Order Deny,Allow Deny From All Allow From 192.168.1.2 When you visit anything other than root things work fine. Eg. if you visit http://testdomain.com/somedirfile.html It will show the right error in /launch/........
  • OpenVZ Solutions vzquota : (error) Can't open quota file for id 123123, maybe you need to reinitialize quota: No such file or directory


    Error: Unable to apply new quota values: quota not running Container start failed (try to check kernel messages, e.g. "dmesg | tail") Killing container ... Container was stopped Error: Unable to apply new quota values: quota not running Can't umount /vz/private/123123: Invalid argument [root@rtt 123123]# vzquota on 123123 vzquota : (error) Can't open quota file for id 123123, maybe you need to reinit........
  • sudo: unable to resolve host


    sudo: unable to resolve host yourhostname No clue why sudo is doing that when running. Solution Check /etc/hosts You will probably find that it doesn't contain "yourhostname" for 127.0.0.1 Just update the hostname or add a field for your hostname like this: 127.0.0.1 yourhostname ........
  • "Object of class WP_Term could not be converted to string"


    Normally when I've seen this it's when you are using a variable like a normal string when in fact it's actually an array such as this example: [Tue Mar 13 04:22:35 2018] [error] PHP Catchable fatal error: Object of class WP_Term could not be converted to string in /vhost/httpdocs/wp-content/plugins/wp-instagram-post/classes/class-woo-igp.php on line 578 &nbs........
  • Installing SSL Certificate with Chain Intermediary CA File


    Some of the cheaper or newer SSL suppliers will require this to work properly (otherwise you may be prompted that the cert is invalid when it's not the case but it will certainly scare off your users!). In the Apache vhost conf for the domain here is what you add: SSLCACertificateFile /path/to/your/cafile.pem Here is a full example of an SSL Vhost config in Apache using a CA Certificate file ........
  • Unable to load dynamic library '/usr/lib64/php/modules/module.so' - /usr/lib64/php/modules/module.so: cannot open shared object file: No such file or directory in Unknown on line 0


    Getting this error on Centos 6 with PHP 5.3 when just running "php -v" PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/module.so' - /usr/lib64/php/modules/module.so: cannot open shared object file: No such file or directory in Unknown on line 0 PHP Warning: Cannot load module 'XCache' because conflicting module 'apc' is already loaded in Unknown on line 0 Solution:........
  • Unable to negotiate with 192.168.1.99 port 22: no matching host key type found. Their offer: ssh-dss Solution


    ssh rtt@192.168.1.199 Unable to negotiate with 192.168.1.99 port 22: no matching host key type found. Their offer: ssh-dss It looks like the DSS option is not considered secure so when connecting from newer Linux systems to an older one you will get the above error. It can be fixed (but you should consider upgrading your SSH daemon): ssh -oHostKeyAlgorithms=+ssh-dss rtt@192.168.1.199........
  • MySQL Adding New Field to Existing Database Table


    ALTER TABLE existingtable ADD newfieldname VARCHAR(255);........
  • Centos How To Update to Glibc 2.14 Plus


    Centos 6 requires GLIBC 2.12 however a lot of new programs you would want to compile may need a newer glibc. You can't remove the old glibc since the whole OS is based on it but you can install the updated glibc alongside it and do an export pointing to your updated GLIBC. mkdir ~/glibc_install; cd ~/glibc_install wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz........
  • MySQL How To Add New Field Column To Existing Table


    ALTER TABLE thetable ADD newfield VARCHAR(255) It's very simple just specify "the table" and then the newfield type........
  • PHP geoip.so fatal error Solution


    PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0 Remove the GEOIP from PHP: php71w-pecl-geoip-1.1.1-1.w6.x86_64 PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the........
  • tftp: client does not accept options - solution if you are using UEFI PXEBoot disable it!


    tftp: client does not accept options I spent the good portion of a late evening on this double checking settings that I know always worked right for tftp! This error can also happen if you are trying to boot PXE in UEFImode. Enter your BIOS and change it to "Legacy PXE" or non-UEFI PXE mode and you'll be good to go!........
  • Linux how to view video card make and exact model


    Normally lspci will show you just like this and would suggest they are exactly the same card: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) 1c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) lspci -vnn is the answer As we can see one is a Gigabyte and the other is an MSI card. Wha........
  • How to disable Google Fonts in Wordpress


    edit theme css: Click "Appearance -> Editor -> Stylesheet" http://yourblog.com/wp-admin/theme-editor.php?file=style.css&theme=twentysixteen textarea { color: #1a1a1a; /*font-family: Merriweather, Georgia, serif;*/ font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif........
  • Unable to load dynamic library /usr/lib64/php/modules/php_openssl


    Unable to load dynamic library '/usr/lib64/php/modules/php_openssl' not sure how to fix this........
  • Thunderbird E-mail List Blank White but e-mails still clickable and viewable


    In Thunderbird in a very large folder suddenly all of my e-mail list became blank/white even though you could click on the invisible/white/blank lines and it would show the e-mails. Itried to close and reopen but only going to Folder -> Properties and clicking Repair Folder fixed it (basically it had to redownload/rebuild the entire index and all e-mails).........
  • css responsive images


    add this style="background-size: contain;max-width: 100%; height: auto;" to your img code. Example: ........
  • responsive table without changing much code solution


    So you've got a responsive site with tables but it breaks them so anything not viewable on the screen is now cut off. Here is a simple solution that will allow users to scroll horizontally so they can see the whole table: &........
  • yum how to install old obsolete packages


    This is important as unfortunately Centos may designate a package obsolete and the replacement breaks everything (eg. you have a config file and the new replacement is not at all compatible with it and it breaks your application). This is where disabling obsoletes comes into play, it can be done from yum but it doesn't work at the time I find. yum --setopt=obsoletes=0 install someapp However Ifind it still installs the new app and not the one you ask for........
  • PHP Howto Store Value of Included File Output Into Variable


    ob_start(); include "yourfile.php"; $stored_value=ob_get_clean();........
  • [Wed Sep 20 15:34:44 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Wed Sep 20 15:34:44 2017] [error] Init: Unable to read server certificate from file /www/ssl-certs/server.crt [Wed Sep 20 15:34:44 2017] [error] SSL Library Err


    [Wed Sep 20 15:34:44 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Wed Sep 20 15:34:44 2017] [error] Init: Unable to read server certificate from file /www/ssl-certs/server.crt [Wed Sep 20 15:34:44 2017] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag [Wed Sep 20 15:34:44 2017] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error........
  • vbulletin 4.2.5 after upgrading from 3.6 white screen fatal php errors


    The code may lead you to believe you have an incompatible template but if you are not trying to use an old template currently that is not the issue. I actually deleted all 3.x style templates to make sure. What the issue is, is old plugins that are not compatible but Vbulletin does not seem to account for this except that you'll see a fatal PHPerror. You should disable all plugins and then enable one by one until you find the one that is causing the issue. &........
  • iptables v1.4.7: can't initialize iptables table `NAT': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded.


    iptables -t NAT -A PREROUTING -s 24.30.44.0/24 -j DNAT --to-destination 10.10.10.1 iptables v1.4.7: can't initialize iptables table `NAT': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Solution # it is case sensitive "nat" and DO NOT use "NAT" or you will get this error! iptables -t nat -A PREROUTING -s 24.30.44.0/24 -j DNAT --to-destination 10.10.10.1........
  • kdenlive - No LADSPA plugins were found! Check your LADSPA_PATH environment variable. [producer_xml] failed to load transition "qtblend"


    This happens if you are running a kdenlive script from the shell of a remote machine without using SSH "-X" forwarding and it will also cause any areas where you write text to be a white screen for that duration. melt FusionFestival.kdenlive No LADSPA plugins were found! Check your LADSPA_PATH environment variable. [producer_xml] failed to load transition "qtblend" [producer_xml] failed to load transition &q........
  • /usr/bin/supermin-helper exited with error status 1. To see full error messages you may need to enable debugging. See http://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs at /usr/bin/virt-list-partitions line 177.


    virt-list-partitions kvmusertest.img /usr/bin/supermin-helper exited with error status 1. To see full error messages you may need to enable debugging. See http://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs at /usr/bin/virt-list-partitions line 177. #solution update-guestfs-appliance........
  • Linux Unable to mount cifs/smb share in /etc/fstab


    sudo mount -a Unable to find suitable address. [35758.706993] CIFS VFS: Error connecting to socket. Aborting operation. [35758.707247] CIFS VFS: cifs_mount failed w/return code = -111 [35795.476160] CIFS VFS: Error connecting to socket. Aborting operation. [35795.476346] CIFS VFS: cifs_mount failed w/return code = -111 When the above happens "Unable eto find suitable address" it usually means the smb nam........
  • MySQL: table is marked as crashed solultion


    myisamchk can fix it But be careful and use the right options to avoid losing data. In fact if you haven't you should make a backup or at least manually copy /var/lib/mysql. Replace "YourDB" with the name of your database Replace "yourcrashedtable" with the name of your crashed table. The -o option is the safest and should avoid dataloss whereas -r is more aggressive and is a last option (I have lost data using -r and........
  • Centos 5.9 Working Vault Repo file


    Centos 5 is not supported running yum will produce an error like this: YumRepo Error: All mirror URLs are not using ftp, http[s] or file. Eg. Invalid release/ removing mirrorlist with no valid mirrors: /var/cache/yum/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base Solution - Update this file CentOS-Base.repo # CentOS-Base.repo........
  • Disable SSH Password Authentication to Increase Security and Harden SSH Linux Unix Server Ubuntu Mint Centos Debian


    Just a note before you do this you should have a sure, guaranteed way into the system such as local, KVMor preferably publickey making bruteforce SSH absolutely impossible since there is no password to bruteforce and even if someone knew the password they wouldn't be able to login except from the local console (presumably you should make sure no one unauthorized has physical access). 1. Edit /etc/ssh/sshd_config Find the section like this:........
  • kdenlive titles/text renders as white screen when using .sh script


    When using the .sh script the rendering doesn't work after an upgrade of related packages to kdenlive. kdenlive (kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1)) with affine or composite transitions was fine but is now broken during the time of transition it is just a white screen. The previous version was fine: kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1 But now I can't find it or install it:........
  • Wine uninstalled broken on Linux Mint


    Solution: Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt sudo aptitude install wine The following NEW packages will be installed: ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6 wine1.6-amd64{a} wine1.6-i386:i386{a} The following packages will be REMOVED:........
  • ffmpeg trouble concatenating similar but different files


    When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right. Solution for me: My example uses 3 videos in total so "n=3" and a=1 to include audio. ffmpeg -threads 12 -i file1.mp4 -........
  • ffmpeg Unable to Use Hardware Encoding with Nvidia 3.40 Driver and GT210 card


    I believe from what I've read that this card's driver doesn't support the features after trying all known troubleshooting methods. ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload -c:v hevc_nvenc -profile main -preset slow -rc vbr_hq -c:a copy uservideoRendered.mp4-test ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload........
  • Linux Mint USB Kernel Tainted and Locked Port/Dev File


    Essentially a program I was running for mining did not terminate properly with Ctrl+C it is listed as defunct and cannot be killed, kernel is tainted and normal tricks to disable the port are impossible the dev and sys entries for the device cannot be browsed or interacted with in any form without a lockup of the request. The only solution is to reboot due to the kernel taint as far as I can find so far. [1130246.811056] INFO: task minerd:21861 blocked for more th........
  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd ffmpeg-3.3.2/ ./configure --disable-yasm install prefix /usr/local source path ........
  • OpenVZ error : Container start failed (try to check kernel messages, e.g. "dmesg | tail") Locked by: pid 166638, cmdline vzctl start 888171


    This container won't start after exhausting its memory. There are no relevant or helpful messages in dmesg or vzctl.log as well. Standard troubleshooting such as disabling PPP etc has not helped. 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Locked by: pid 166029, cmdline vzctl start 888171 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container already locked 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container was stopped 2017-07........
  • How to extract view contents of initramfs image gzip'd


    Very simple browse to your /boot directory It does make more sense to extract the image in its own directory eg "initramfs-blabla-dir" as it will literally extract directly to the pwd. cp initramfs.img someotherdir cd someotherdir zcat initramfs-3.10.0-514.el7.x86_64.img | cpio -idmv........
  • Migrate Centos 7 from Single HDD to mdadm RAID 10 array:


    Done on Centos 7.3 very important as clearly based on older guides it was a lot easier and more simpler! Hint do not use grub2-install! If you have trouble booting after this check this CentOS mdadm RAID booting/fixing guide. One huge caveat if you are an oldschool user or sysadmin who has avoided UEFIbooting The nor........
  • Centos 7 A start job is running for dev-mapper-clx2droot.device (8min 44s / no limit)


    This error is usually because of some sort of encryption in this case a Seagate enclosure with encryption (even though not enabled) did not allow this hard drive to boot.........
  • USB 3.0 External HDD Enclosure Seagate UAS problems - [sdd] tag#1 CDB: Write(16) 8a 00 00 00 00 01 70 04 08 68 00 00 00 08 00 00


    This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether. Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........
  • Centos 7 Cudaminer Nvidia setup guide


    I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us yum install automake curl openssl-devel libcurl-devel gcc gcc-c++ yum -y install kernel-devel-`uname -r` yum -y install unzip #the........
  • USB 3.0 PCI x1 Card Review VIA VL805 on Linux Review and Experience


    This is a VIA made VL805 USB 3.0 Chipset with 4-ports and MOLEX powered. First of all this unit was cheap at about only 9 USD with fast shipping. My biggest concern was if this was a quality unit and would it really give you full USB 3.0 speeds (some people reported with similar cards that for some weird r........
  • Why won't my Linux Mint boot after I manually installed a new kernel?


    Why won't my Linux Mint boot after I manually installed a new kernel? eg. apt-get install linux-image-newerone Do this dpkg -l|grep linux-image|grep extra ii linux-image-extra-3.16.0-38-generic 3.16.0-38.52~14.04.1&nb........
  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........
  • php read file into variable


    php read file into variable $content = file_get_contents(home.html); Otherwise if you want to get the source code of the PHP file, it's the same as a .txt file: $content = file_get_contents('/path/to/phpfile.php'); You can also get from URLs: $content = file_get_contents('http://someurl.com/file.txt');........
  • USB Device/MP3 Player not working properly and can't browse the device filesystem? Check the cable twice and again!


    Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues. Take for example the error messages from Linux Mint: [804829.895414] usb 1-1: USB disconnect, device number 11 [806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........
  • Openshot 2.2 is very unstable always crashing in Linux Mint 18.1!


    Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user: Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4 Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........
  • Track 01: 34 of 1726 MB written (fifo 100%) [buf 99%] 3.6x.Errno: 5 (Input/output error), write_g1 scsi sendcmd: cmd timeout after 1.897 (40) s CDB: 2A 00 00 00 44 A9 00 00 1F 00 resid: 6144 cmd finished after 1.897s timeout 40s write track da


    These errors believe it or not are simply because of not being the root user or running with sudo! However if you didn't know to try as root you'd think there was a problem with your burner or disc Essentially it looks like without root you cannot send the required scsi commands to continue writing. Ithink cdrecord should have built-in tests or safeguards to see if it has the permissions to run the required commands. I guess for more advanced users the idea is simila........
  • Transaction Check Error: file /usr/lib64/php/modules/fileinfo.so conflicts between attempted installs of php-pecl-fileinfo-1.0.4-2.el6.rf.x86_64 and php-common-5.3.3-49.el6.x86_64 solution


    Transaction Check Error: file /usr/lib64/php/modules/fileinfo.so conflicts between attempted installs of php-pecl-fileinfo-1.0.4-2.el6.rf.x86_64 and php-common-5.3.3-49.el6.x86_64 solution you can't install php-pecl-fileinfo it seems to be incompatble with the php5.3 being installed: yum --exclude=php-pecl-fileinfo --skip-broken --disablerepo=epel install php-*........
  • xdebug easiest howto get going


    Just make sure you have php-xdebug installed and edit your php.ini: [xdebug] xdebug.profiler_enable = 0 xdebug.profiler_enable_trigger = 1 xdebug.profiler_output_dir = "/tmp/xdebug/" xdebug.output_name = "cachegrind.out.%t-%s" Also make and set permissions on /tmp/xdebug: mkdir /tmp/xdebug chmod 777 /tmp/xdeb........
  • Coolermaster CM Storm Enable LED Backlight in Fedora/Ubuntu/Mint Linux Howto - MB24 Keyboard and MS2K Mouse


    Just type the following in the bash/terminal shell to enable the blue LED light on the Coolermaster CM Storm keyboard: xset led 3 To make it automatic and permanent execute the following as root: echo "xset led 3" >> /etc/rc.local This is a fairly nice gaming keyboard whichI bought because I type very quickly and the cheap standard keyboards simply can't keep up!........
  • strange vi errors in Linux Mint/Ubuntu line 58: E488: Trailing characters: t_Sbet line 63: E171: Missing :endif


    This happens on any file an even just typing "vi"whereas it never happened before. I suspect an update or environment variable is causing this issue When entering vi I get this weird stuff line 58: E488: Trailing characters: t_Sbet line 63: E171: Missing :endif When exiting vi I get this weird stuff t_Sb=^[[4%?%p1%{1}%=%t........
  • Text Editors - Top Linux Ubuntu/Debian/Mint Options


    1.) gedit/pluma both very good the only thing I wish is that there was an autosave for unsaved documents! The only other competitor which is similar but I prefer less is kwrite (although I think kwrite may have proper autosave) pluma seems to be a renamed gedit yet gedit is still installable on Linux Mint) ........
  • Avocent DSR8020 KVM/IP - Network Connect Error - Solution


    This error is commonly due to Java security or TLS settings but there is a second issue with forwarded ports that also causes it. 1. Java Security/TLS Settings issue: This article has the solution to change them all in Linux automatically 2. Port Forwarding Issue if your Avocent DSR is behind NAT/private IP........
  • zip warning: name not matched: in Linux Solution


    There are usually two reasons for this. #1 The most common is that you need to enable the -r (recursive) flag with zip to make it recurse into directories. So the solution is to use -r zip -r somefile.zip yourfiles #2 If you are using bash scripting based on ls without the full path or for some other reason the full path is missing, zip looks for the files in the current directory so this will always fail.........
  • Linux how to whois query other gTLDs such as .club solution


    whois in Linux is incredibly out of date and does not seem to recognize most new TLDs domains, but there is a quick and easy tip/hack/tweak for this. An example of new TLD's site as .review .site .club whois somesite.club No whois server is known for this kind of object. bash to the rescue Now I did try to apply this in .bashrc but DONOT! Ithink the * wil........
  • What happens when you unplug 1 or more devices from an mdadm RAID array to simulate a failure in Linux Ubuntu/Centos/Debian?


    In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below. mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore. [45817.162728] ata4: exception........
  • Migrating from Linux Mint 17.2 mdadm RAID array to a new one (because I upgraded to larger drives).


    1.) Replicate the number of partitions in your new drives. gdisk /dev/sda gdisk /dev/sdb I created 3 partitions of the same same size. partition #1: +1G (/boot) partition #2: +60G (swap) partition #3: rest of it (/) #note if you are using GPT/gdisk you need to create separate a partition at least 1MB in size (in my case I would a 4th partition and mark it type ef02).........
  • Linux how to reformat html file code solution


    The solution is simply "tidy"/Tidy-HTML. It will take your poorly formatted HTML code (and I mean files that span just a few lines that are unreadable) and fix it up. Note the command below does everything in place. *Make sure you take a backup of all .html files* It also seems to break html5 code/templates so beware. tidy -im yourfile.html An automated way in bash:........
  • Linux SAMBA does not work with symlinks


    At first I thought it's just not possible but there is actually an option that can be enabled to make symlinks work with Samba. Then I put this under the [global] section Note: It's "wide links" and not "wide symlinks" (some other sites have incorrect info which was a frustrating waste of time :)) Add this to your smb.conf follow symlinks = yes wide links = yes unix ex........
  • Using a proxy with yum in Centos 6


    Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 12: Timeout on http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds') Error: Cannot find a valid baseurl for repo: base You would think this should be fine and simple like using a proxy with most other software? However........
  • How To Disable htaccess inheritance or exclude a directory


    The only real way us to do the following in the root of your site's .htaccess RewriteRule ^somedirectory-not-to-inherit/.*$ - [L]........
  • mdadm and lvm how to completely disable and remove vg/pv/lv


    In short the solution is just to use vgremove for the actual /dev/mapper device: vgremove /dev/mapper/backups-backuplv box mnt # mdadm --manage /dev/md8 --stop mdadm: Cannot get exclusive access to /dev/md8:Perhaps a running process, mounted filesystem or active volume group? box mnt # lv lvchange lvconvert lvcreate l........
  • LG Phoenix 2 Escape Disable AT&T Phonebook/Contacts Error Message


    A friend has this issue where you try to go to contacts and you get a message saying you need to enable data (basically if you are not really on the AT&T network). The Solution - You can disable this by the following code in the dialer: *#*#2666#*#*........
  • mdadm frozen and doesn't realize array is dead/missing failed due to unplugged drives


    This was a surprising bug but I unplugged all drives for an array md127. At first it was just 1 drive and mdadm seemed to notice this. I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it. This created problems trying to unmount it or even to stop this array with mdadm freezing. As for how to fix it I can only think of making sure you are not in a mounted path of........
  • Unable to mount location Failed to retrieve share list from server: No such file or directory solution


    Cannot even "Browse Network" when clicking on "Windows Network" Unable to mount location Failed to retrieve share list from server: No such file or directory logs: [2017/02/14 00:16:44.271314, 0] ../source3/nmbd/nmbd.c:58(terminate) Got SIGTERM: going down... [2017/02/13 17:35:41.797944, 0] ../lib/util/become_daemon.c:124(daemon_ready) &........
  • curl: (1) Protocol "https not supported or disabled in libcurl"


    This seems to only happen from a bash script but it's not clear why it works from the terminal but not from a bash script.........
  • Centos 5 OpenSSL does not support TLS 1.2 Apache Error


    [Thu Jan 26 14:13:31 2017] [notice] caught SIGTERM, shutting down [Thu Jan 26 14:14:00 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Jan 26 14:14:00 2017] [error] Server certificate is expired: 'Server-Cert' [Thu Jan 26 14:14:00 2017] [notice] SSL FIPS mode disabled [Thu Jan 26 14:14:07 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Jan 26 14:14:07 2017] [error] Server certificate is expired: 'Server-Ce........
  • DRBD Split-brain solution


    Uh oh [17925926.174277] block drbd0: Handshake successful: Agreed network protocol version 96 [17925926.174325] block drbd0: conn( WFConnection -> WFReportParams ) [17925926.174342] block drbd0: Starting asender thread (from drbd0_receiver [1682]) [17925926.174432] block drbd0: data-integrity-alg: [17925926.174581] block drbd0: drbd_sync_handshake: [17925926.174586] block drbd0: self 2AAE66AF9252D6DB:2815BF........
  • How to Properly Secure SSL/TLS Apache Settings against Heartbleed Poodle (TLS) Poodle (SSLv3) FREAK BEAST CRIME


    Many users still are not aware but simply patching OpenSSL does not secure you against many known and easy to exploit attacks that will render your encryption useless by an attacker. Use the following setings in /etc/httpd/conf.d/ssl.conf SSLCipherSuite "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH EDH+aRSA !CAMELLIA !SEED !3DES !RC4 !aNULL !eNULL !LOW !MD5 !EXP !PSK !........
  • The folder contents could not be displayed connection refused - solution


    This happened while updating Linux Mint/Debian/Ubuntu on a remote SMB/Samba share. Solution After waiting for updates to complete things will work normally but it really is strange that the service actually stops working or is disabled for so long during the update. It is likely the update process stops the serivce and only restarts after the update is complete.........
  • ERROR 2013 (HY000): Lost connection to MySQL server during query


    The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files. UPDATE user SET password=password("newpass") WHERE user='root'; flush privileges; ERROR 2013 (HY000): Lost connection to MySQL server durin........
  • cPanel Install Error kernel ipv6 module support solution


    2017-01-12 14:25:36 529 (ERROR): The installer was unable to verify that your kernel supports IPv6. 2017-01-12 14:25:36 530 (ERROR): The message received when trying to create an IPv6 socket was Address already in use 2017-01-12 14:25:36 531 (ERROR): Please ensure that the ipv6 module is enabled and loaded in your kernel. 2017-01-12 14:25:36 532 (FATAL): Exiting... Solution This happened........
  • bash count length of string and characters


    variable="abc hello" How do you count it (note blank/white space counts as a character too)? echo "${#variable}" 9........
  • fdisk wq causes hung process


    I created a new partition table on a newly plugged in device and it caused fdisk to hang (even force kill does not work). It also may be a bad drive or some other issue because fdisk -l hangs after the first 2 HDDs (totaly of 8 HDDs on this system): [1232879.903596] INFO: task fdisk:27176 blocked for more than 120 seconds. [1232879.903607] Tainted: P&nbs........
  • ADATA SU800 256GB 3D NAND Flash SSD Test & Review


    I keep reading these drives are slower, but they are cheap and still SSDand work very fast for my needs. As you can see the sequential read is 481-491MB/s, if I put them in MDADM RAID10 mode (normal RAID1) they should give me well over 900MB/s and with redundancy and being very cheap for what they offer. [1232206.315622] scsi 8:0:1:0: Direct-Access ATA ADATA SU800&........
  • remove gpt partition linux


    sudo fdisk /dev/sdh WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util fdisk doesn't support GPT. Use GNU Parted. WARNING: The size of this disk is 8.0 TB (8001563221504 bytes). DOS partition table format can not be used on drives for volumes larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID partition table format (GPT). The device presents a l........
  • How to clear all iptables rules for all tables and chains


    iptables -F iptables -t nat -F iptables -t mangle -F This is as simple as it gets.........
  • iptables how to forward localhost port to remote public IP


    iptables -t nat -A OUTPUT -m addrtype --src-type LOCAL --dst-type LOCAL -p tcp --dport 3306 -j DNAT --to-destination ip.ip.ip.ip iptables -t nat -A POSTROUTING -m addrtype --src-type LOCAL --dst-type UNICAST -j MASQUERADE sysctl -w net.ipv4.conf.all.route_localnet=1 Make sure you substitute "ip.ip.ip.ip" for your real public IP and also the "--dport 3306" for the port you want to forward. Finally run the sysctl command and........
  • mcp55 NIC not working at boot on Centos 6.6-6.8


    forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X forcedeth 0000:00:08.0: eth0: MSI enabled forcedeth 0000:00:08.0: eth0: no link during initialization ADDRCONF(NETDEV_UP): eth0: link is not ready forcedeth 0000:00:08.0: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Dec 1 18:21:32 box15 kernel: forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. Dec 1 18:21:32 box15 kernel........
  • Centos extremely secure iptables setup


    If you want to make sure only a certain IP can access your server for any service or protocol here is a way to do it (just be sure you have access to the IP(s) mentioned or you will be locked out). iptables -F iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp -s IP.IP.IP.IP -j ACCEPT iptables -A INPUT -j DROP serv........
  • OpenVZ Solution CPT ERR: c02fa000,73 :CPT: lock fd is closed incorrectly: 1 and vps-net_add ERROR: Unable to add route ip route add 192.168.5.2 dev venet0


    The only solution after trying many suggestions was to simply restart the "vz" service (definitely not preferable). Even doing an ifdown and ifup for venet0 did not help. ifup venet0 Bringing up interface venet0: Configuring interface venet0: net.ipv4.conf.venet0.send_redirects = 0 RTNETLINK answers: Network is down Some errors from log: CPT ERR: d2dc60........
  • How to Normalize and Increase the Volume on M4A files in Linux


    M4A is a weird format, so you have to be creative here is a quick copy of what I did. Basically you need to convert to .wav to make use of them and thenI converted the resulting .wav into an mp3 (nice small file size and basically universally playable): ======= sudo apt-get install mpg321 mp3gain faad normalize lame faad "Voice 002 (copy).m4a" faad "Voice 002 (copy).m4a"........
  • DRBD Slow Performance - 99.99 % [jbd2/drbd0-8] highiowait solution


    Tired of checking iotop and seeing that your drbd partition is using 99.99% of io all the time and finding your drbd device performs slow in general? This is especially an issue in versions of DRBD in the 8.3 tree in particular one documented case is on "8.3.13" but it likely applies to other devices. The symptoms are that resyncing is fine and normal but any reasonable amount of activity is very slow and lagged and creates a high server load and con........
  • Linux how to enable and disable NCQ


    To disable NCQ in the Linux kernel (change sda to match your device). echo 1 > /sys/block/sda/device/queue_depth To enable NCQ (change sda to match your device). echo 31 > /sys/block/sda/device/queue_depth........
  • grubby fatal error: unable to find a suitable template solution Centos


    vzkernel-2.6.32-042stab116.2.x86_64.rpm&n........
  • weird mv error mv: inter-device move failed:


    mv -f /home/user/Downloads/android-studio/ /mnt/sda3/ mv: inter-device move failed: ‘/home/user/Downloads/android-studio/’ to ‘/mnt/sda3/android-studio’; unable to remove target: Is a directory........
  • Linux Mint 17 How to Enable File Sharing Option in File Manager


    I still cannot understand how this would not be enabled by default and I struggled to find the reason why with manually installing samba etc.. wondering why the option for sharing was not in the menu. On Linux Mint "MATE" the package is called "caja-share" and on Cinnamon it is called "nemo-share" so edit the below command as necessary: *Also note that the "samba" package is necessary as it is not inst........
  • blocked for more than 120 seconds issues with iowait and timeout on Live Linux distribution while writing to physical disk


    This happened while an mdadm array was syncing, all access from writing a new blank file to opening a small .txt file was very slow: [222117.312078] kjournald starting. Commit interval 5 seconds [222117.685060] EXT3-fs (md0): using internal journal [222117.685096] EXT3-fs (md0): mounted filesystem with ordered data mode [222122.376847] kjournald starting. Commit interval 5 seconds [222122.602825] EXT3-fs (md2): using internal jour........
  • The connection was reset The connection to the server was reset while the page was loading.


    In Firefox I cannot connect to any website, proxy is disabled and outside network access is confirmed, no system or manual proxy was set on this Linux Mint/Ubuntu system. Normally this can be caused by proxy or DNS problems and the weird thing is that traceroute and ping to other IPs worked fine but even connecting to sites by IP was not working. The connection was reset The connection to the server was reset while the page was loading.........
  • astrachat connection problems in Android 5.01 Lollipop


    I wanted to use Astrachat because it seems to be the only app that has video, pic and file sharing for Jabber butI cannot even connect despite any other client working fine including Xabber and others. astrachat "Oops.. We can't connect to the account that you provide above. Please recheck your account detail". Unfortunately to make it worse there doesn't seem to be any error log or more details about the issue. The jab........
  • Uploading Error HTTP error. Wordpress Upload Error Solution


    When you start uploading larger images in Wordpress you have to make sure your maximum attachment size is large enough and that the execution time is not too short: Uploading Error HTTP error. [Thu May 12 16:32:25 2016] [error] [client 10.10.5.2] PHP Fatal error: Maximum execution time of 30 seconds exceeded in /httpdocs/blog/wp-includes/class-wp-image-editor-gd.php on line 182 Solution Edit p........
  • Script runs fine from shell but not from cron job in Linux/Unix Debian/Ubuntu/Mint/Centos


    Usually the cause is inexplicable because some things just don't work correctly even when calling all commands by their full path. Usually adding the following to your crontab file at the top will fix/solve the issue: SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin ........
  • openvpn 2.3.10-1.el6 issues auth-env does not work correctly for auth-user-pass-verify


    openvpn 2.3.10-1.el6 issues in the .conf auth-user-pass-verify "passwordcheck $username $password $untrusted_ip" via-env auth-env does not work correctly in OpenVPN 2.3: Sat Apr 23 02:30:22 2016 - $username - $untrusted_ip - login failure But OpenVPN 2.2 does work as expected. It could be that the specified script automatically receive........
  • Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so:


    Stopping httpd: [FAILED] Starting httpd: httpd: Syntax error on line 73 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared obje........
  • Apache SSL Reverse Proxy Very Slow Solution


    This is a simple fix but not a simple problem and it still doesn't make sense to me. But in a nutshell if your target proxy server works fast when accessing directly over SSL then this may be your issue. It seems SSL does not play nicely when the target proxy destination/host has a riduculously long key (such as 8192 bits long). Now this is normally not a problem, in fact the target server could be accessed with hardly any delay directly despite such a long key.........
  • Nvidia Linux Card not working due to LSI 9200/SAS2008 IRQ conflict


    At first my BIOS said the card may not work right because there is no more option ROM space. I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly. But it still cannot initialize the card properly(does not work): [ 33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........
  • SAS2008 LSI 9200-E Linux Upgrade Flash Firmware with sas2flash


    Download from here http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9200-8e#downloads sudo Installer_P20_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash -listall LSI Corporation SAS2 Flash Utility Version 20.00.00.00 (2014.09.18) Copyright (c) 2008-2014 LSI Corporation. All rights reserved &nbs........
  • Apache Vhost HowTo Serve Same Content using a different domain and IP


    There are a few ways of doing this and all basically involve using the reverse proxy or "ProxyPass" feature of Apache to accomplish it. 1.) Create a normal vhost and simply symlink the root directory of the site you want to mirror. Eg. originalsite.com and newsite.com /vhosts/originalsite.com/httpdocs You would symlink like this: ln -s /vhosts/originalsite.com/httpdocs vhosts/originalsite.com/........
  • iptables: Applying firewall rules: iptables-restore: line 40 failed


    service iptables start iptables: Applying firewall rules: iptables-restore: line 40 failed [FAILED]........
  • MySQL PHP adding a backslash/escaping apostrophes Solution


    The first thing to diagnose is what is actually in the database (use PHPMyAdmin or CLI). You will of course either find that the backslash is either in the database or not. If the backslash is in the database you probably have magic quotes gpc/runtime on and/or are calling the "addslashes()" function which does this. If you are escaping your data with mysql_real_escape_string() then think again, you probably have magic quotes gpc enabled either in php.ini or........
  • Linksys E2500 DD-WRT Upgrade Instructions and Enabling 5ghz with Tomato Firmware


    1.) Flash directly to this file: http://tomato.groov.pl/download/K26RT-N/build5x-132-EN/Linksys%20E-series/tomato-E2500-NVRAM60K-1.28.RT-N5x-MIPSR2-132-Max.zip *I was never able to get the larger "Mega" file to work, at least not initially so I recommend the file above. To enable 5ghz I had to do the "Clear NVRAM" Option before it was shown. 2.) Or if you don't need 5ghz (most devices do not support it and cannot........
  • Linux Mint/Ubuntu/Debian Dual NICs networks problem when enabling and disabling one device


    The Scenario You have dual NICs and you disable NIC1 which uses 192.168.1.1 as its gateway. With NIC2 you enable it/connect it to another network which also has the gateway 192.168.1.1 Everything will work fine at this point. When switching back to NIC1 even with NIC2 disabled and even unplugged, the OS basically can't pick up the new/updated ARP entry of the old device for 192.168.1.1 and perhaps thinks it is a security risk or spoof of some sorts and blocks i........
  • Linux Mint Network Manager Connection Disconnect Option Grayed Out


    This is a real pain because I had to manually unplug ethernet cables for network testing or to use an alternate network or guarantee physical access to one network segment is cut off. For some reason this happened after Ikilled dbus because it was confused and blocking packets thinking they were coming from the wrong interface since eth0 and eth1 both had the same subnet and gateway. I eventually did a "service network-manager restart" but the option was........
  • Errors were found while checking the disk drive for /.


    Iwill start by saying I think I know what caused this boot-time error on Linux Mint but should also apply to Debian and Ubuntu. I changed my BIOS time to several hours in the past to match the current time, but this caused Linux to think there were incorrect filesystem times. The problem is that it seems when you hit this I am not sure what is happening, it doesn't seem to be doing fsck and hangs without prompting the user. What I have found is that........
  • Linux Debian/Ubuntu/Centos How To Force Internet Traffic Through PPTP L2TP OpenVPN Account Only


    The following assumes the computer is local/physical to you and/or it always has a LANIP so it can be accessed on site without having a default gateway. The key to this is not to set a default gateway for your computer or you can set a script on boot or other time to delete the gateway (where eth0 is the NIC you are using): route del default eth0 50.80.20.2 is the VPN server you connect to 192.168.1.1 is your........
  • Avocent 8020 KVM Java Icedtea Viewer


    This command in Debian/Ubuntu/Mint will get everything need installed for most Java based KVM viewers: sudo apt install icedtea-netx The following additional packages will be installed: ca-certificates-java icedtea-netx-common openjdk-8-jre openjdk-8-jre-headless It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post.........
  • Centos installing grub problems suspect gpt problem


    grub> root (hd0,0) root (hd0,0) Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) But if you do: root (hd1,0) setup (hd1) it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical). Checking if "/boot/grub/........
  • linux bash mass rename tool Centos/Debian/Ubuntu


    Say you have a bunch of files like this: file-01.jpg file-02.jpg ............... What if you want to mass rename them? the rename tool can work just like sed For Debian based distros: Note "file" is what we search for and "newname" is what we replace it with, so substitute according to your requirements. rename s/file/newname/ name-file-*.jpg For R........
  • Cannot get mono to work properly on Linux Mint


    mono/wine not working in Ubuntu/Linux Mint/Debian: The assembly mscorlib.dll was not found or could not be loaded. It should have been installed in the `/usr/lib/mono/2.0/mscorlib.dll' directory. solution: sudo apt-get install mono-complete Problems: mono does not work well for even simple things like a Winrar self extracting .exe fi........
  • How To Record Your Screen with Linux


    Istanbul: At least in Linux Mint the latest 17.2 version Istanbul freezes when "In process of saving to Disk" even with the workaround of not having Sound recording enabled. It looks like a great app but bugs like this seem to have plague it for over 8 years! Kazam: This little app works great, its only bug is that when you try to tell it to record a window or area it puts a gray cov........
  • kernel:[14277.697049] EDAC MC0: UE row 4, channel-a= 0 channel-b= 1 labels "-": (Branch=0 DRAM-Bank=0 RDWR=Read RAS=7048 CAS=0 FATAL Err=0x4 (>Tmid Thermal event with intelligent throttling disabled))


    I am getting this error: kernel:[14277.697049] EDAC MC0: UE row 4, channel-a= 0 channel-b= 1 labels "-": (Branch=0 DRAM-Bank=0 RDWR=Read RAS=7048 CAS=0 FATAL Err=0x4 (>Tmid Thermal event with intelligent throttling disabled)) But many people believe this is a bug/false message and the server is running stably.........
  • OpenVZ how to enable FUSE in the container


    vzctl set 2 --devnodes fuse:rw --save Where "2" is the ctid........
  • unfortunately lg keyboard has stopped - LG Phone Keyboard Issue


    This seems to effect many other LG phones , specifically their keyboard app and basically makes your phone unusable where you cannot use the keyboard because that message keeps popping up and the keyboard will not load. unfortunately lg keyboard has stopped solution: 1. Go to your settings and manage apps and find the LG Keyboard app: 2. Stop it from running, delete all data and clear all cache. After the above you will probably find that your........
  • Centos 6 how to guide convert LVM non-RAID into mdadm 1/10 RAID array live without reinstalling


    Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access. So in this case you add a second physical or disk or already ha........
  • Centos cannot login by console or ssh session closed immediately


    In my case I could login with the initial install but I rsync'd everything over while preserving ownership and permissions to another RAID partition and booted from that.was fine before. The problem is that you are kicked out the second you login and the problem was SELINUX for some reason (perhaps it noticed something strange when it was moved to the new partition) login: pam_unix(login:session): session opened for user root by LOGIN(uid=0) login: ROOT LOG........
  • openvz yum problem Centos 6.5 cannot find file on mirror:


    #solution Edit /etc/yum.repos.d/openvz.repo For the first two entries comment out #mirrorlist and uncomment #baseurl and then it worked openvz yum problem Centos 6.5 cannot find file on mirror: yum update Loaded plugins: fastestmirror Determining fastest mirrors * openvz-kernel-rhel6: mirrors.ustc.edu.cn * openvz-utils: mirrors.ustc.edu.cn base ........
  • Virtualbox errors on Ubuntu/Debian/Mint


    The solution was to reinstall the vbox dkms package and do a manual modprobe of the modules it makes. I never sorted out the unable to start due to the USB issue, I did have the guest additions installed but the only way to boot was to change the pointing device from USB to PS2 and then to disable the USB controller (if your pointing device is set as USB, disabling USB will not work because it will re-enable by default when it sees your pointing device is USB, this is w........
  • How To Install Linux Mint 17.2 on mdadm RAID with a separate boot partition


    Iwas surprised to see that Linux Mint at the latest 17.2 version still has NO mdadm installer option, and worse the installer will not be able to create a proper booting environment even when you do install it. How to setup mdadm in Linux mint LiveCD sudo su apt-get install mdadm # partition as you need and then create your mdadm devices # create your SWAP md0 mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /d........
  • Installing zoneminder on Ubuntu/Debian Linux Howto


    sudo apt-get install zoneminder [sudo] password for one: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libuser-perl python-evince kdebase-apps kwrite unixodbc libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp python-mediaprof........
  • status: { DRDY ERR } error: { ICRC ABRT } failed command: WRITE FPDMA QUEUED MCP55 Linux Errors


    [ 2868.041375] ata1: EH in SWNCQ mode,QC:qc_active 0x40 sactive 0x40 [ 2868.041554] ata1: SWNCQ:qc_active 0x40 defer_bits 0x0 last_issue_tag 0x6 [ 2868.041556] dhfis 0x40 dmafis 0x40 sdbfis 0x20 [ 2868.041874] ata1: ATA_REG 0x41 ERR_REG 0x84 [ 2868.042013] ata1: tag : dhfis dmafis sdbfis sactive [ 2868.042163] ata1: tag 0x6: 1 1 0 1 [ 2868.042301] ata1.00: exception Emask 0x1 SAct 0x40 SErr 0x400000 action 0x6 frozen [........
  • bash script get directory location and path of script howto tutorial


    So the situaton is this, you depend on things being relevant to where your bash script is and to be safe you want it to be dynamic (eg. do not hard code that we switch to /abc/dir but rather detect where script.sh is located). scriptlocation="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" The path is then contained the the variable "scriptlocation" so you can cd to it in your script etc............
  • Firefox errors Unable to generate public/private key pair. (Error code: sec_error_keygen_fail)


    Your firefox is out of date if you get errors like below: Secure Connection Failed ........
  • Centos/obfsproxy errors


    I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar: yum -y install python-pip python-devel No package python-pip available. #install the EPEL repo python-pip install obfsproxy python-pip install obfsproxy -bash: python-pip: command not found pip install obfsproxy &........
  • OpenVZ Install Guide Again / Quick Setup


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl #enable ip_forward sed -i s/'net.ipv4.ip_forward = 0'/'net.ipv4.ip_forward = 1'/g /etc/sysctl.conf #all interfaces should not send redirects echo "net.ipv4.conf.default.send_redirects = 1" >> /etc/sysctl.conf echo "net.ipv4.co........
  • Openvz Enable netadmin


    vzctl set $CTID --devnodes net/tun:rw --capability net_admin:on --save........
  • ssh session and port forward or reverse port matching or assocation howto


    Use netstat with the -anpe option. The e option shows the inodes and I do not know if it will always work or if it was by fluke but I was dealing with dozens of SSHsessions and needed to know which session was related to which forward (the PIDs of the SSHand SSHD did not match etc...) Notice the "59560675" and "59560762" those are almost identical, if you find two sets that are nearly identical except for the last 3 digits they may match (in my ca........
  • Avocent Unable to load resource avctVideo.jar


    Avocent Unable to load resource avctVideo.jar Avocent requires port 80 and 443 to be forwarded or you will get a message like above if it's on a NAT network and you are accessing it from the outside (internet).........
  • iptables port forwarding multiple ports to another IP


    iptables -t nat -A PREROUTING -p tcp -m multiport --dports 80,443,2068,8192 -j DNAT --to-destination 192.168.1.175 Just adjust the "--dports" to the ports you need and the --to-destination to the destination IP (note it must be on the same network as the server running iptables........
  • Weird Ubuntu Issues with NVIDIA driver/Compiz


    1.) My screensaver would take a long time to disable after hitting a key. 2.) Usually errors like below will follow. 3.) Compiz sometimes uses 100% or high CPU 4.) My window controls will disable (eg. the minimize, maximize and close buttons). It seems like Compiz or appearance/effects disable themselves. Re-enabling Desktop Effects under Appearance temporarily fixes it. 5.) high load in general from things like "Migration" pr........
  • HP Procurve Switch 2824 CLI Telnet Experience , Guide and Tutorial


    ------------------------------------- ProCurve J4903A Switch 2824 Software revision I.10.77 Copyright (C) 1991-2009 Hewlett-Packard Co. All Rights Reserved. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by the Government is subject to restrictions........
  • Dell CS24-NV7 lspci dmidecode info


    0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2) 0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3) 0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3) 0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1) 0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2) 0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 0000:00:05.1 I........
  • Debian sources.list examples


    Based on this from Debian The 'distribution' can be either the release code name / alias (wheezy, jessie, stretch, sid) or the release class (........
  • bash script check if string contains text


    if [[ $variable = *windows* ]]; then echo "Our variable has windows" fi ........
  • bash string substitution


    so in this case we have files named like this: track01.cdda.wav.mp3 track06.cdda.wav.mp3 track11.cdda.wav.mp3 track02.cdda.wav.mp3 track07.cdda.wav.mp3 track12.cdda.wav.mp3 track03.cdda.wav.mp3 track08.cdda.wav.mp3 track13.cdda.wav.mp3 track04.cdda.wav.mp3 track09.cdda.wav.mp3 track05.cdda.wav.mp3 track10.cdda.wav.mp3 but we want to rename them so they are like "05.........
  • Unable to configure RSA server private key SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch


    [Tue Jun 23 02:05:52 2015] [error] Unable to configure RSA server private key [Tue Jun 23 02:05:52 2015] [error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch The above is an accurate description of what is wrong. In our case the client made a simple mistake of thinking the localhost.crt and localhost.key (default key locations for Apache SSL in Centos) were in the same directory but they we........
  • Lost connection to MySQL server during query [2013]


    This happened while trying to delete several thousand users from phpBB and basically corrupted the innoDB tables. InnoDB: Page lsn 3 881164362, low 4 bytes of lsn at page end 881164362 InnoDB: Page number (if stored to page already) 86920, InnoDB: space id (if created with >= MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 700 InnoDB: (index "tid_post_time" of table "phpBBdb2005"."phpbb3_p........
  • Error: Cannot retrieve metalink for repository: epel. Please verify its path and try again


    Error: Cannot retrieve metalink for repository: epel. Please verify its path and try again You have to upgrade the ca-certs for epel but need to disable it before that can happen. yum upgrade ca-certificates --disablerepo=epel........
  • bash script how to do wildcard string comparisons or matching


    This is a feature that works very well in bash and is easy to do: *Remember you need the double brackets for this specific test even though a normal if would not require them variable="hi there" if [[ "$variable" = hi* ]]; then echo "yes it contains hi" fi........
  • Linux Kernel EDAC errors EDAC MC0: UE row 0, channel-a= 0 channel-b= 1 labels "-": NON-FATAL recoverable (Branch=0 DRAM-Bank=0 Buffer ID = 0 RDWR=Read RAS=0 CAS=0 NON-FATAL recoverable Err=0x800 (Non-Aliased Uncorrectable Patrol Data ECC))


    I'm not sure why I'm getting these but all memory modules are the exact same and all passed memtest successfully although they are ECC. I've heard that ECC RAM can't be tested as well and the kernel seems to indicate they are non-fatl recoverable errors. I wonder if the BIOS has aggressive RAM timing or maybe the controller or motherboard is bad. [ 12.716515] EDAC MC: Ver: 2.1.0 [ 12.717771] EDAC MC0: Giving out device to........
  • Linux disable firmware prevents NIC/Ethernet from working phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.


    [ 17.208336] tg3 0000:08:00.0: eth0: Link is up at 1000 Mbps, full duplex [ 17.210194] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX [ 76.000065] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 76.002332] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 86.736004] eth0: no IPv6 routers present [ 148.960038] phy0 -> rt2x00lib_request_fi........
  • VPN Account Buyers Guide and General Info


    What matters most about VPNproviders in 2024? We are highly suspicious of VERYLARGE VPN providers that have LOW PRICES and HUGE DISCOUNTS. The suspicion is that for those who know what costs are involved to purchase thousands of IPs and servers are not small. At the prices that many of the big mainstream providers offer, it is likely unprofitable or barely profitable. Then, how are those companies making money or is that even the goal? There use........
  • KVM/QEMU how to boot from direct kernel vmlinuz and initrd with networking


    Thsi is very handy when doing your own kernel development. -m specifies how much ram (in the example it is 768MB) -kernel specifies the path to the kernel file -net tap,ifname=tap1,script=no (the ifname=tap1 is what you need to change and setup manually). *Run "tunctl -b" to create a tap device and use the one it gives you for ifname= Enable networking to the outside like this: *Note we assume that your bridge is br0 i........
  • OpenVZ vzctl update changes how iptables work - iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. updated solution


    Are you getting the same old error message even though your iptables settings for OpenVZ are correct? iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. The reason is because in newer vzctl the old way of setting IPTABLES="" in vz.conf is completely deprecated (I spent some time fiddling wondering why my settings were correct but........
  • Disable linux bash proxy ENV export variable


    if you type Export and see something like this: declare -x all_proxy="socks://127.0.0.1:22000/" Most sites assume and tell you to check your .bashrc or /etc/profile /etc/bash.bashrc which may not apply if you've unknowingly or forgot that you setup a proxy from your GUI such as Gnome. To check in Gnome if you have a permanent proxy do the following: System -> Settings -> Network Proxy........
  • esniper and curl errors https://signin.ebay.com/ws/eBayISAPI.dll?SignIn: Couldn't connect to server: couldn't connect to host


    I kept thinking it was esniper but somehow my bash settings have a preset proxy that was creating the issue. https://signin.ebay.com/ws/eBayISAPI.dll?SignIn: Couldn't connect to server: couldn't connect to host curl manually to any URL is the same: curl: (7) couldn't connect to host Run curl with -vvvvvv mode to see the issue: curl -vvvvvvvvvv http://realtechtalk.com * About to c........
  • Disable cphulk in CPanel if you can't login even with the right password


    It's a great feature to ward off bruteforce but is also annoying because you think you have the wrong password when you can't login. How to Disable cp hulk for 5 minutes /usr/local/cpanel/etc/init/stopcphulkd........
  • bash increment how to


    variable=0 increment=$((variable + 1))........
  • Vbox/Virtualbox devices grayed out for non-root user solution


    It is a permissions issue that is hard to fix. All but one USB device is greyed out. I am already a member of "vboxusers" I have already enabled and disabled USB support for the guest. I have already reinstalled the latest VBOx guest editions If running as root it all works fine Changing........
  • How to root and unlock S4 in Canada Bell/Rogers/Telus/Fido I337 4.4.2


    i337 Canada on Bell is hard to root or even install TWRP Installed TWRP from Odin and my computer gave me the bluescreen at the end but it seemed to be successful (after ODIN said reset). TWRP mode does not seem to enter, instead you get the Android recovery mode with Volume up + Home http://galaxys4root.com/galaxy-s4-root/how-to-root-att-or-verizon-galaxy-s4-on-android-4-4-2/ 1.)........
  • OpenVZ Howto disable ploop and switch back to SIMFS


    It's simple, just edit /etc/vz/vz.conf and add or change the following: VE_LAYOUT=simfs........
  • firefox android text size inconsistent large and small text size solution


    This is very annoying and also hard for web developers who want to see how things look on Android. You may be fooled into thinking you have an unclosed bracket or incompatible code but this is the "text inflation feature" which I feel should be disabled by default. It works so inconsitently that one block of text will appear small while the other will be huge and is quite annoying. The solution is simple Settings ->Display and &q........
  • Openvz iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. solution


    iptables -t nat -A PREROUTING -p tcp -m tcp -d 192.168.2.1/32 --dport 3389 -j DNAT --to-destination 192.168.5.2:3389 iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. The above is often because you don't have the correct modules loaded on the hostnode or enabled for the container but in some cases it's actually a weird openvz setting. Che........
  • Openvz 2014-08-12T19:05:55-0400 vzctl : CT 391801 : Unable to start init, probably incorrect template 2014-08-12T19:05:55-0400 vzctl : CT 391801 : Container start failed


    2014-08-12T19:05:55-0400 vzctl : CT 391801 : Unable to start init, probably incorrect template 2014-08-12T19:05:55-0400 vzctl : CT 391801 : Container start failed This was caused by trying to run a 64-bit template on a 32-bit kernel hostnode which is obviously impossible. The solution is to use a 32-bit template or upgrade the hostnode to 64-bit.........
  • Cannot mount iPhone or iPad in Linux


    Unable to mount iPad 4 Unhandled Lockdown error (-4) This is because you need the libimobiledevice-utils package installed and a newer version of it. My older Ubuntu 10.10 uses a version that does not have "idevicepair" which seems to work perfectly and automatically with newer versions of the library. Basically if you install the above library it should be plug and play and if your imobiledevice-utils doesn't have 'idevice........
  • PayPal subscriptions automatically cancelling after creation of profile


    There is a weird quirk with how this works, but there is a variable called "src" that defaults to 0 or disabled if not specified as 1. The default 0 means not to recur billing on a subscription.  It's too bad it's not more obvious anywhere nor is there an explanation or warning during payment or after to both the seller and buyer. Here's a proper subscription code example that does recur and does not cancel........
  • 2CO/2Checkout Howto Enable IPN/Notification Setup & Script Info


    https://www.2checkout.com/documentation/notifications/order-created It shows all the parameters that get passed so you can make a simple script to process it. To enable 2CONotifications you need to do the following: Login Browse to the top right to an icon that looks like a "circle with horizontal lines inside" - Notifications. Enter the appropriate URL for your IPN/Notification processing script (........
  • CPanel Link to all of the command line options


    CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting.  I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts. So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........
  • OpenVZ Unable to stop container


    vzctl stop ctid Killing container ... Child 1033348 exited with status 7 Unable to stop container vzctl enter ctid enter into CT 29831 failed Some have suggested using vzctl stop ctid --fast which does not work. The only thing that seems to work is restarting the vz service.........
  • Webalizer Error Error: Unable to restore run data (11) Error: Unable to restore run data (11) Solution


    Error: Unable to restore run data (10) Error: Unable to restore run data (11) Ikeep getting this error but so far there is no obvious solution. Sometimes I've had to remove the *.hist files so I'll try that again. *Update This is an ongoing random problem after months of running webalizer it runs into some problem that can only be fixed by removing the following files so it can rebuild the stats (you end up losing p........
  • phpBB guests unable to view forums without logging in Anonymous account solution


    This is still a weird quirk about phpBB, you can allow everyone+guests to see a forum. What also controls the first layer is this weird built-in "Anonymous" account. You have to actually give that account specific rights to view all the forums or otherwise the above will happen and you'll wonder why your group permissions don't seem to apply.........
  • iptables how to forward port to another IP address with DNAT


    -A PREROUTING -d 98.98.98.5/32 -p tcp -m tcp --dport 1050 -j DNAT --to-destination 192.168.1.50:3389 The above forwards port 1050 on IP98.98.98.5 to 192.168.1.50 port 3389 (you can obviously edit things to meet your needs).........
  • mytop install errors


    mytop-1.4-2.el5.rf.noarch from rpmforge has depsolving problems --> Missing Dependency: perl(DBI) is needed by package mytop-1.4-2.el5.rf.noarch (rpmforge) solution: #disabling excludes is required on CPanel type boxes which exclude most updates including perl-DBI yum --disableexcludes=main install perl-DBI mytop-1.4-2.el5.rf.noarch from rpmforge has depsolving problems --> Missing Dependency:........
  • The Best NoSQL Solution


    To first start off, there are many misconceptions about NoSQL and especially its strengths and weaknesses. Even the popular NoSQL solution MongoDB is fraught with issues that no one seems to be concerned about aside from a few but there are serious issues with database integrity and verified writes. MySQL was considered dangerous or incomplete at one point without having the transactional safety features of Oracle for example. However the NoSQLimplementations seem........
  • Acer Aspire E1-522-5603 Howto Enter BIOS - Press F2


    Press F2, you wouldn't know this because like most new computers, it doesn't announce the required key unless you enable it from the BIOS. ........
  • error: Legacy syntax is unsupported: copyright error: line 10: Unknown tag: Copyright: distributable


    Usually just modify the .spec file to resolve this: vi specfile.spec Change "Copyright: GPL" to "License: GPL" and try again.........
  • drbd won't create device if previous partition is on it Command 'drbdmeta 0 v08 /dev/md160 internal create-md' terminated with exit code 40


    This is what fixed it: [root@box13 ~]# dd if=/dev/zero of=/dev/md160 bs=512 count=500 Basically you need to wipe out more than just the 512 byte partition table so 512 bytes * 500 is more than enough to make DRBD happy and think the partition is now empty. The reason this happens is because it gets confused when there is a previous partition with data on the device you are using. root@box13 ~]# d........
  • drbd won't sync 8.3.13 on OpenVZ kernel


    I used the matching 8.3.13 utilities and it didn't work but strangely the newer 8.3.16 which makes DRBD complain works just fine. GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51  0: cs:SyncSource ro:Secondary/Primary ds:UpToDate/Inconsistent A r-----     ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5236960   &am........
  • LVM Tutorial how to create a Physical Volume (PV), Volume Group (vg), and a Logical Volume (LV) within it


    # first we need a physical volume which we use the pvcreate tool to create # I create mine on /dev/sdb3 pvcreate /dev/sdb3 dev_is_mpath: failed to get device for 8:19 Physical volume "/dev/sdb3" successfully created # pvdisplay shows the newly created volume pvdisplay "/dev/sdb3" is a new physical volume of "1.35 TiB" --- NEW Physical volume --- PV N........
  • How to view GPT/EFI Windows Partition Table


    fdisk unfortunately can't do this and I'm not sure if there's any updated version that handles it but parted can do it. Here's an example of how to do it: parted /dev/sda print 1 17.4kB 1024MB 1024MB ntfs primary 2 1024MB 16144MB 15120MB ntfs primary /dev/sda1 would be the first partiton /dev/sda2 would be the second partition You can then just access them like any other normal partition.........
  • How to Enable RDP Remote Desktop in Windows 2008 Server


    Start -> Administrative Tools ->Server Manager Under "Computer Information" click "Configure Remote Desktop". Under "System Properties" choose the type of "Allow connections" you want. That's all there is to enabling RDP Access in 2008 server.........
  • Asterisk VOIP Sipura/Linksys PAP2T Calls Not Being Received Solution


    This problem seemed to happen recently but was likely causing issues before where the phone(s) do not ring. Now there are a few reasons why this can happen especially if your adapter has DND mode enabled (disable it). However that wasn't my issue and Ionly figured it out the other day when by fluke if you're on the phone (making a call) then calls will come in. That's when Ifigured out the solution: This likely app........
  • Enable Multiple RDP Sessions on Windows XP, Vista, 7 Howto


    http://deepxw.blogspot.ca/search/label/Universal%20Termsrv.dll%20Patch The above site has the patch that does this essentialy turning a Desktop Windows into a full fledged RDP server.........
  • OpenVZ Quick Install Copy & Paste for Centos 6


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl After that just reboot and you may also have to enable ip_forward in /etc/sysctl.conf........
  • Centos Howto Upgrade to PHP 5.3 from 5.2


    It's not as simple as "yum install" as you can see below and it doesn't stop there. yum install php53 Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: mirror.us.leaseweb.net * extras: centos.mirror.rafal.ca * updates: centos.mirror.nexicom.net * base: centos.mirror.nexicom.net * addons: centos.mirror.nexicom.net Setting up Install Process........
  • cPanel VPS Server Cannot Login as root


    I was worried the server was hacked, I was logged in already as root but couldn't login to CPanel or a new SSHsession. I even reset the password from the shell and it did not work still. The reason is CPanel Hulk, it detected a brute-force attack so it locked down the root account entirely even from the correct password. According to cPanel the best way around this is to whitelist your IP.........
  • What a hdd hard drive and mdadm RAID array failure looks like in Linux


    [3805108.257042] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [3805108.257052] sd 0:0:0:0: [sda] Write Protect is off [3805108.257054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [3805108.257066] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [3805108.257083] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [3805108.257090] sd 0:0:0:0: [sda] Write Protect is off........
  • MySQL How to add a field/column using alter


    ALTER TABLE yourtable ADD COLUMN info VARCHAR(255)........
  • PHP Warning: imagecreatefromjpeg(): gd-jpeg, libjpeg: recoverable error: Premature end of JPEG file


    I was having an issue with only certain random/jpeg files with the functions imagecreatefromjpeg imagecreatetruecolor and other related ones. This issue was annoying basically it seems like a libgd issue/bug with newer versions of PHP and it was difficult to trace-out. One very useful thing that helped me was using "php-cgi" and passing the query string as an argument eg: php-cgi images.php source=IMG.jpg (that way you get all the error messages wh........
  • iptables howto multiport forward in single line example


    -A PREROUTING -p tcp -m multiport --dports 10000,18080,13306 -j DNAT --to-destination 192.168.5.83........
  • Fatal error: Out of memory (allocated 6291456) (tried to allocate 7680 bytes)


    Fatal error: Out of memory (allocated 6291456) (tried to allocate 7680 bytes) This is usually caused by Wordpress, Drupal or other ridiculously inefficient CMS' out there, as a temporary fix you can increase PHP's memory limit but it's best to find the actual culprit, by disabling add-ons and other scripts etc...........
  • Asterisk iptables block bruteforce attacks howto with fail2ban


    yum -y install fail2ban vi /etc/fail2ban/jail.conf [asterisk-tcp] enabled = true filter = asterisk action = iptables-multiport[name=asterisk-tcp, port="5060,5061", protocol=tcp] sendmail-whois[name=Asterisk, dest=you@example.com, sender=fail2ban@example.com] logpath = /var/log/asterisk/messages maxret........
  • Centos 6 samba server not showing up in WORKGROUP


    This is different than Centos 5, you have two services btu they are called "smb" and "nmb". You need to enable and start "nmb" in order for your samba server to be listed. chkconfig nmb on; chkconfig smb on service nmb start;service smb start........
  • Dell CS24-NV7 Howto Enable LAN/NICs and PXEBoot in the BIOS


    Dell CS24-NV7 Unusually the Virtualization was enabled when I got this server but all the NICs were diabled in the BIOS including PXE boot! Advanced -> Advanced Chipset Control PCI Slot 1 Option ROM: Enabled Onboard LAN1 Control: Enabled LAN1 Option ROM Scan: Enabled (you need it for PXE boot) Onboard LAN2 Control: Enabled LAN2 Option ROM Scan: Enabled *you will need to reboot and........
  • Ubuntu 10.10 100% CPU from apt-get solution


    When manually running it for some reason it decided to ask for/use the CD as a source whichInever set. Disabling the CD as a source stops this from happening, otherwise apt-get will keep respawning and use 100% CPU.........
  • Linux Bash Remove Last Character from string/variable howto


    somestring="309sfjlks39889d" removelast="${somestring%?}........
  • VBox/Virtualbox solution to NS_ERROR_CALL_FAILED error


    VBox/Virtualbox solution to NS_ERROR_CALL_FAILED error This is likely because you have 2D/3D acceleration enabled and your card doesn't support it. Eg. you switched video card drivers or video cards that did support it. The funny thing is that you CANNOT disable those options as they are "greyed" out in the VBox client GUI. The config file has to be manually changed and fixed with these options "accelerate3D="false" accelera........
  • VBulletin Enhanced Captcha / RegSecure not showing/working images solution.


    This happened after a customer migrated their hosting and the issue was being unable to access PHP sessions. Warning: session_start(): open(/var/lib/php/session/sess_3e0oms763m6mrqekdnnmodlhs3, O_RDWR) failed: Permission denied (13) in /register.php(202) : eval()'d code on line 1 Solution:(use the correct ownership/permissions) chown apache.apache -R /var/lib/php........
  • sed replace specific entire line


    sedcommand="$line"s sed -i $sedcommand/.*/"$newline"/ $location The variable "line"should be the actual line number you want to replace. The above format is necessary otherwise (to break the "$line"s into it's own variable for it to work.........
  • kvm centos cannot compile error


    ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install gcc make ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install compat-gcc-* ./configure Error: Could not find alsa Make sure to have the alsa libs and headers installed. yum -y install alsa-lib-devel ./configure........
  • KVM on Centos 6.3 cannot boot FreeBSD 9.2 AMD64


    On the same OS with the same kernels basically I cannot boot FreeBSD installer, I believe the issue is the host CPU. One host runs an Intel and works, while an Opteron 2373 does not work despite suggestions from this thread: http://149.20.54.209/showthread.php?t=36761 I've tried cpu options like "kvm64" "Opteron_G3" and none........
  • MySQL Error : Table 'datastore' is read only Error Number : 1036 solution


    This happens because of a permissions or ownership issue. Generally /var/lib/mysql should be all owned by mysql.mysql (check that). To fix it use chown -R mysql.mysql /var/lib/mysql Also make sure the files are at least readable and writable by mysql (eg. 700).........
  • Openvz OOM Centos Issue Memory Config Settings Solution


    Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux even setting privvmpages to a specific setting DOES not affect "free -m" in containers. This is probably a kernel issue 23:36:29 up 159 days, 7:12, 4 users, load average: 0.42, 0.44, 0.33 [root@box13 ~]# free -m total&n........
  • Sipura / Linksys PAP/VOIP/SIP Adapter Issue Can't receiving incoming phone calls and you're behind a NAT router (99% of people)? solution


    Sipura / Linksys PAP/VOIP/SIP Adapter Issue Can't receiving incoming phone calls and you're behind a NAT router (99% of people)? 1. Login to the adapter. 2. Click on "Advanced" (location varies but usually somewhere on top) 2. Click on "SIP" 3. Scroll down to "NAT" (usually at the bottom). You'll find 2 columns with 4 rows of drop-down boxes (they'........
  • tar how to include hidden files solution


    tar -czf yourfile.tar.gz . The . dot is the crucial part, normally many will use * and that will exclude hidden files by default which is very undesirable as many hidden files are important such as .htaccess and conf files in your home directory etc.. It seems the default behavior of tar should be the opposite but these are all very old tools.........
  • vzquota : (error) Quota on syscall for id 42131: No such file or directory vzquota on failed [3]


    Starting container... vzquota : (error) Quota on syscall for id 42131: No such file or directory vzquota on failed [3] Solution cd /var/vzquota mv quota.42131 quota.42131-disable vzctl start 42131 Starting container... Initializing quota ... Container is mounted Adding IP address(es): Setting CPU units: 1000 Container start in progress... ........
  • PHP Security - Enable Safe Mode to increase security


    Everyone should be running with safe_mode on in /etc/php.ini (on Centos) as it makes exploiting your system more difficult is PHPcan't execute anything on the system if a script is exploited. For example with Safe_Mode on the only executable files on the system are ones in the safe_mode_exec_dir = /safephp This is crucial, if you must execute anything from PHPthen you have to copy the binary and assign to the user that Apache runs your site under.&........
  • CPanel suhosin install failed


    /scripts/phpextensionmgr install PHPSuHosin Updating md5sum list Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)... Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........
  • Wordpress Custom Menu Limit Fix/Solution


    This is usually solved by two variables alone: max_input_vars=5000 memory_limit=256M Now you should be able to have unlimited amounts of custom menus in Wordpress.........
  • htaccess block IPs while RewriteEngine/modrewrite is enabled solution


    Istruggled with this for awhile because the normal setup won't work if modrewrite is being used: ORDER ALLOW, DENY So the solution is something like this: order allow,deny deny from 12.43.12.0/24 allow from all ........
  • Unixbench Testing


    The first is a dual CPU AMD Opteron 2373EE (4 cores x 2) and I think it did bad because it has some old 250GB SATAs which can only do about 65MB/s max sequential reads. I think it should have blown away the second (AMD X4 640 Quad Core). [root@fs12home unixbench-4.1.0-wht-2]# ./Run make all make[1]: Entering directory `/root/unixbench-4.1.0-wht-2' Checking distribution of files ./pgms exists ./src exists........
  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........
  • Dell Perc 6/i SATA benchmarks without battery


    The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results. This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane. Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: N/A De........
  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
  • pxe-32 tftp open timeout


    pxe-32 tftp open timeout The solution was to enable tftp in xinetd with "chkconfig tftp on". See the troubleshooting below: chkconfig --list NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off&n........
  • bash for loop with specific numbers


    Say if you need to make a firewall script to block certain ports this works great. for ports in 21 25 443; do iptables rules here done........
  • Bash weird variable whitespace missing when echoing printing


    Bash weird variable whitespace missing var=`cat tlds.csv|grep .ca,` # echo "var=:$var:" :ar=:.ca,Canada Why is the v missing in the last line? It should be :var=:.ca,Canada instead of :ar=:.ca,Canada I noticed a problem with the file with doing a "cat -v" on it. Here's the issue, the file contains carat M ^M: .vg,British Virgin Island........
  • bash script howto use heredocand assign to a variable and write to a file


    zonetemplate=$(cat ........
  • iptables centos error getsockopt failed strangely: Invalid argument


    iptables -t nat -A PREROUTING -p udp -m multiport --dports 20,123,443 -j REDIRECT --to-port 53 getsockopt failed strangely: Invalid argument........
  • yum update error


    yum update error Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 229, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 145, in main (result, resultmsgs) = base.buildTransaction() &nbs........
  • charat in PHP convert non-English characters into code


    This is basically URL decoding to the decimal code but nothing in PHPworks how you'd expect it. Here are online tools to verify and check your work, it's important when querying databases with non-English characters: http://yehg.net/encoding/index.php# http://meyerweb.com/eric/tools/dencoder/ http://www.codetable.net/decimal/65398 Japanese: http://symbolcodes.tlt.psu.edu/bylanguage/japanesechartkatakana.html Charat code for PHP:........
  • Execute Local Bash Scripts remotely by SSH


    for ip in `cat fixlist.txt`; do sudo -u apache ssh root@$ip "`cat iptablesrules.sh`" done In the above example we are going to execute the commands within the local file "iptablesrules.sh" on all the machines in "fixlist.txt". This is a great way of performing server maintenance in a clustered or cloud environment.........
  • open /dev/kvm: No such file or directory failed to initialize KVM: Operation not permitted - Solution


    open /dev/kvm: No such file or directory failed to initialize KVM: Operation not permitted [ 96.084502] kvm: disabled by bios Any of the above means that "Virtualization" is not enabled in your BIOS. Most servers and Desktops (non-mainstream) can do this no problem but leave it off by default. Note that some systems even though the CPU supports it, don't allow enabling of Virtualization for some reason (especially some lap........
  • mkdir(): Too Many Links - The Solution and Problem in ext3 filesystems


    The error itself "mkdir(): Too Many Links" is not very useful, but I'll translate it into plain English. It means you've reached the filesystem's limit of how many directories can be created in a single directory. In this case for ext3 the limit is 32000 and it was exceeded. What's the solution? The simple solution is to move those directories into more subdirectories possibly sorting them by date, alphabet or numerically.........
  • iptables redirect ports to a different host and port + NAT Masquerade howto/solution


    This is important if you need public access to internal IPs such as at your office and don't want to use a VPN just to SSHinto different servers: Below forwards the port "10001" to the IP192.200.5.53 on port 22 (of course adjust it to your needs). iptables -t nat -A PREROUTING -p tcp --dport 10001 -j DNAT --to-destination 192.200.5.53:22 Remember to enable MASQUERADE on your NAT IPs or they won't be able to talk to the outside world (........
  • css custom table class howto


    table.custom { border-collapse: collapse; border-style: solid; border-width: 1px; border-color: black; font-size: 11px; } table.custom td { border-collapse: collapse; border-style: solid; border-color: black; &........
  • MySQL Show Print List of Field Names only without other data or attributes


    SELECT column_name FROM information_schema.columns W........
  • WD 20EARX Dead Again


    Another new drive bad from the start: Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC } Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........
  • mdadm enable bitmap to speed up rebuilds


    Have you ever unplugged the wrong drive and then had to rebuild the entire array? It may not be a big deal in some ways but it does make your system vulnerable until the rebuild is done. Many distros often enable the "bitmap" feature and this basically keeps track of what parts need to be resynced in the case of a temporary removal of a drive from the array, this way it only needs to sync what has changed. To enable bitmap to speed up rebuilds and sync........
  • Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO


    I'm using ecryptfs and was suddenly unable to access or even ls my home directory (but every subfolder is accessible). It just hangs and throws this message in messages/dmesg: Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO I read somewhere that perhaps some file or folder is owned by root somehow, sure enough there are some and sudoing to root allows me to........
  • WD 20EARX 2TB Bad within days


    This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad. ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0 ata1.00: irq_stat 0x40000008 ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/00:00:........
  • init: tty (/dev/tty2) main process (1031) terminated with status 1 init: tty (/dev/tty2) main process ended, respawning


    After some fsck issues I can't boot my Centos 6.4, this just keeps repeating over and over. init: tty (/dev/tty2) main process (1031) terminated with status 1 init: tty (/dev/tty2) main process ended, respawning Disabling SELinux through Single User mode fixed this.........
  • MySQL my.cnf Server How To Secure/Bind to Localhost and Prevent Outside Connections Solutions


    [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 bind-address=127.0.0.1 The key is "bind-address", set that to 127.0.0.1 and no one from outside the server can connect.........
  • PHP How To Create and Assign Variables from POST/Submit FORM


    foreach ($_POST as $key => $value) { if ( $key != submit ) { $values.="$key=$value<........
  • Ubuntu/Linux disable extra Mouse Buttons Microsoft Comfort Mouse 4500


    I find it very annoying that this mouse has buttons on the side where you grip it and the left one goes back in the browser and the right one goes forward. Imagine if you're filling out a form and hit it, most forms/websites have no protection against it. Source: http://ubuntuforums.org/showthread.php?t=2065400 Here's how I fixed it with xinput, it's too bad there's no good standard GUI to........
  • sysctl how to apply values from /etc/sysctl.conf after changes


    If you make changes to /etc/sysctl.conf (which are permanent and not lost during reboot) but want them to apply with rebooting just use the following command: sysctl -p After that your changes will be enabled.........
  • SMARTCTL Enable SMART on Device Solution for Error "Device does not support SMART Error Counter logging not supported"


    smartctl -a /dev/sda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: ATA WDC WD1600YS-01S Version: 20.0 Serial number: WD-WCAP03024940 Device type: disk Local Time is: Mon Apr 29 21:40:07 2013 PDT Device does not support SMART Error Counter logging not supported........
  • eth0 changed to eth1 or eth2 and the solution to fix it


    If you move your hard drive(s) around to other computers/servers, you'll find that your eth0 keeps getting higher, the first time it will become eth1 and then eth2 etc and even higher if your server has dual or quad NICs. The reason is that udevd basically assigns eth0 tot he first NIC it finds and remembers it, if it encounters a NIC with a differentMAC, it assigns it one higher (eg. eth1). See the example below, I have eth2 now so how doI fix it?........
  • SSH Can't Login/Hang


    Client Log OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.1.253 [192.168.1.253] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_d........
  • Kernel panic - not syncing: Attempted to kill init! Pid: 1,comm: init Tained: G I------------- 2.6.32-358.el6.x86_64 #1 Call Trace: [] ? panic+0xa0/0x16f [] ? do_exit+0x862/0x870 [] ? fput+0x25/0


    Kernel panic - not syncing: Attempted to kill init! Pid: 1,comm: init Tained: G I------------- 2.6.32-358.el6.x86_64 #1 Call Trace: [] ? panic+0xa0/0x16f [] ? do_exit+0x862/0x870 [] ? fput+0x25/0x30 [] ? do_group_exit+0x58/0xd0 [] ? sys_exit_........
  • Bad Hard Drive Slows Down Computer


    Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........
  • Hitachi Serial Numbers for Hard Drives without seeing the physical drive


    Here's what SMART tells me the serial number is: === START OF INFORMATION SECTION === Device Model: Hitachi HDS721010CLA332 Serial Number: JP2940HQ3ZY7KH Firmware Version: JP4OA3EA User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is:&nb........
  • Virtualbox Failed to open a session for the virtual machine XP. Failed to launch Remote Desktop Extension server (Unknown Status 0x80004005). Failed to load VMMR0.r0 (VERR_SUPLIB_OWNER_NOT_ROOT).


    Failed to open a session for the virtual machine XP. Failed to launch Remote Desktop Extension server (Unknown Status 0x80004005). Disabled remote display: Failed to load VMMR0.r0 (VERR_SUPLIB_OWNER_NOT_ROOT). solution chown root.root /usr/lib/........
  • How to log all PHP based E-mails for abuse


    Step #1 - Create Wrapper Script vi /usr/local/bin/phpsendmail #!/usr/bin/php ........
  • iptables v1.4.10: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)


    I have iptable_filter loaded on the hostnode so I don't understand this issue.........
  • Centos 6 RTL8111/8168B r8169 link up and down error solution/fix


    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) For whatever reason it seems the r8169 driver that ships and has shipped with most Linux distros for years is still flawed and does not work properly on these cards, causing 100mbit connectivity when it should be 1gbit and even worse, causing random network dropouts. The r8169 driver in Linux kernels is simply not meant to be used on th........
  • OpenVZ - how to manually restore a VPS from another host or backup


    There are 3 pieces that are required to restore and make it work (of course consider if any kernel modules need to re-enabled and if you need to change the IPs): Copy the vz/private/VEID directory to /vz/private Copy the /etc/vz/conf/VEID.conf to /etc/vz/conf/ mkdir /vz/root/VEID After that you should be able to see the VE in vzlist -a You should then be able to start it normally.........
  • Samsung Galaxy Note Ubuntu Linux USB Connection Error


    This pops up when connecting the phone and it doesn't seem to charge. The phone keeps showing a status message every few seconds "Connected as a media device". It's ridiculous why this phone doesn't just default as a simple USB Mass storage device. Here's what I see in /var/log/messages: Jan 30 18:51:27 QuadCoreAM2 kernel: [18038228.144046] usb 1-3: new high speed USB device using ehci_hcd and address 24 Jan 30 18:51:28 QuadCoreAM2 ke........
  • badblocks in Linux to check/verify if a hard drive/HDD is good or bad


    I like badblocks and don't know a better more reliable way of checking the drive. If there are no errors from badblocks and dmesg doesn't produce any SATA related errors, the drive should be good (for now at least). I also prefer to do read and write mode, yes it takes ages but it is really the best way of doing it. This gives me the most confidence in knowing that a drive, especially a new one is at least OK at the moment. To test in read only mode........
  • OpenOffice Writer Replacing/Reformatting Dates in Tables - Howto Disable


    Tools -> Options -> OpenOffice Writer -> Table Uncheck "Number Recognition" This will permanently disable it but won't undo the damage it has already done. I spent a long-time fighting with this horrible feature which should be disabled by default.........
  • kvm cannot boot xen guest using lvm


    This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel. I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk. I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one). This is strange but it seems like this Xen PV guest has some sort of hidden or........
  • Nearly 100% CPU Usage from processes called dma0chan0 dma0chan1 dma0chan2 dma0chan3


    Inever started these processes but they are from a custom based bootable Linux I've made and I've never seen this behavior on other machines or even with the same machine using different kernels. These processes seemed to spawn on their own and I have no idea why and even worse why the CPU usage is so high? Here's the output from top: 907 extaudit 30 10 0 0 0 R 90.7 0.0........
  • Lantronix KVM/IP Keyboard/Mouse not working in BIOS before booting the OS


    I've run into two issues with Lantronix based KVMs on various servers and here's how I solved them (with that said I like these units as they are Java based and OS independent and work very well, unike some other models like Startech). 1.) If you are connected by USB only and you're sure USB support from the BIOS is enabled, you just need to click the following in Lantronix Interfaces -> Keyboard/Mouse Check "Force USB Full Speed Mode", this fixed the issu........
  • Setup PXE Boot using Centos and dhcpd, tftp and syslinux


    This is something I often setup for clients because it's very helpful for people in datacenters, this allows custom OS installs on demand, you can customize it more by using kickstart etc.. but here's a base I use before customizing more: This little script below will install everything you need to get booting by PXE Linux. It also assumes you set a local IP (be sure not to overwrite your existing IP) on eth0:0 (note the :0) as 192.168.1.10 and it........
  • Thunderbird How-To Copy/Backup/Restore Accounts and Settings to Another Computer


    The best way is to use rsync, I've set it up so it doesn't copy unnecessary files, or at least ones I'm sure aren't needed. Here is the rsync command Iused (adapt to your specific Thunderbird profile location): rsync -hazv user@remotehost.com:/home/user/.thunderbird/sbrer.default/* /home/user/.thunderbird/4nyb0.default/ --exclude=global* --exclude=Cache --exclude=ImapMail --exclude=Mail This is a great way to get your e-mail accounts going on a new c........
  • Disable SELinux How To Tutorial Solution


    Here is a quick script that works on most Centos versions to disable the virus/SELinux from blocking basic functionality. The first echo 0 statement disables SELinux instantly but it will still be enabled on reboot. The second line disables it permanently. #!/bin/bash #disable SELinux Immediately echo 0 > /selinux/enforce #disable SELinux Permanently sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config........
  • KVM compilation issue/solution - Disabling PIE due to missing toolchain support glib-2.12 required to compile QEMU


    qemu-kvm-1.2.0]# ./configure Disabling PIE due to missing toolchain support glib-2.12 required to compile QEMU Solution install glib2 *Don't confuse glib2 with glibc, they are different and it may catch some off guard. yum -y install glib2* After that KVM should compile and install just fine.........
  • postfix how to send to multiple recipients default limit of 1000


    The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.5.3 Error: too many recipients. We set this in main.cf: smtpd_client_recipient_rate_limit=0 We didn't specify it before and the default is said to be 0/unlimited and it still didn't change anything.........
  • Centos 5 and OpenVZ won't boot after kernel install


    For whatever reason the current OpenVZ yum repo file enables the RHEL6 version of OpenVZ, why is this bad? Because if you're running Centos 5 it still defaults to using the kernel from RHEL6 which won't work on RHEL5/Centos 5. Ionly realized this after wondering why I couldn't boot into OpenVZ that it was using one meant for RHEL6. To fix the problem you have to edit /etc/yum.repos.d/openvz.repo and disable the "[openvz-kernel-rhel6]" section by changing........
  • Linux/Centos how to block SSH bruteforce/dictionary attacks automatically with denyhosts


    A lot of people become nervous (and understandably so) when checking their auth or security logs, in Centos /var/log/secure and see dozens, hundreds of even thousands of attempted logins to various services, especially SSH. Of course you could manually block these people/IPs but no one has time to read the logs like that, what if some program or script could do it for you? This is what denyhosts does for you, it checks the logs and based on a certain number of failed SSH attem........
  • Samsung Galaxy Note Upgrade to ICS 4.0 microSDHC card not detected/dataloss after upgrading - possible solutions


    I backed up everything in the /mnt/sd_card directory thinking that some dataloss could occur for some reason but purposely left my microSDHC unbacked up thinking that "it won't touch that since it's external" and Samsung's and other manufacturers website even say this (that it won't be affected and not to worry etc). Apparently I was wrong, my microSD was "undetected" and asked to be formatted after the upgrade (there goes 3-months worth of family photos). No........
  • Centos how to upgrade from PHP 5.2 to 5.3 without downtime


    This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server). You may need to upgrade to PHP5.3 to run Joomla or many other reasons. Your host needs to use PHP 5.2.4 or higher to run this version of Jo........
  • xen how to resize an image properly


    The best way I could figure out is to use another guest of some sort to do this, while assigning the disk that needs to be resized to the same guest. So say we have /dev/xvda as the guests drive and we've booted it up. We also have /dev/xvdb (this is going to be the image/disk to be resized). In this case it's based on an ext3/4 image. Run e2fsck on it to ensure there are no filesystem errors. e2fsck /dev/xvdb........
  • mdadm how to add a device to an array after a failure


    This array is a RAID 1 and in this case 1 of the 2 drives failed (a WD drive and I've found them to be the weakest and most unreliable of any brand and are easily damaged/DOA when shipping them). mdadm --manage /dev/md0 --add /dev/sdb1 The above assumes the array you want to add to is /dev/md0 and the device we are adding is /dev/sdb1 *One thing to remember is to make sure the partition you are adding is the correct size for the array. You can also g........
  • setquota: Mountpoint (or device) / not found. setquota: Not all specified mountpoints are using quota. with openvz solution


    Directadmin Error when changing user settings/saving Details Error with system Quotas setquota: Mountpoint (or device) / not found. setquota: Not all specified mountpoints are using quota. Debug Guide You have to disable and enable the quota's using vzquota on and off. After that it will work.........
  • Windows Secret Hidden Temp Directory to free out of disk space issues


    Replace "Administrator" with your username. C:Documents and SettingsAdministratorLocal SettingsTemp Ihave often found several gigabytes of temporary files in there! Just be warned that they may not all be deletable if the files are being used by open programs (so close everything you can). This helped me in a pinch many times when for apparently no reason gigs of disk space are being used for an unknown reason.........
  • MySQL how to copy/duplicate a table


    CREATE TABLE articles_backup LIKE articles The code above creates a new table called "articles_backup" which has the exact same structure and attributes as the original articles table. CREATE TABLE articles_backup SELECT * FROM articles; The above code does the same thing as the first example, BUT it also copies all of the data.........
  • bash script remove non-printable special characters/white space


    In bash you test like this for problems that can be caused by non-printable characters since if you don't know how to identify it because it basically breaks your script. echo "url=$url" should print something like this normally if you have properly formatted input/text: url=::http://someaddress.com:: But if you have some weird hidden characters (not visible in a text editor of any sort you'll get something like this ::l=::http://s........
  • iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) - OpenVZ Container Problem iptables module problem solution


    iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) This solution applies to all other iptables modules/problems for OpenVZ, you'll just need to add them to both lists/lines below if you have modules other than what I have below. The modules need to be enabled in both iptables and the OpenVZ hostnode itself and then the containers which need it must be restarted. How To Enable IPTables Modules in OpenVZ........
  • Directadmin Enable SSL


    It's really silly how DA doesn't enable SSL by default but is otherwise a stable, fast and secure control panel. Here's a copy and paste way of enabling SSL for Directadmin in just a few seconds: *setup SSL openssl req -x509 -newkey rsa:1024 -keyout /usr/local/directadmin/conf/cakey.pem -out /usr/local/directadmin/conf/cacert.pem -days 9999 -nodes That creates the public certificate and private key pair in the location Directadmin expects to fi........
  • failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)


    [ 12.460014] ata1: SRST failed (errno=-16) [ 17.626677] ata1: link is slow to respond, please be patient (ready=0) [ 22.480011] ata1: SRST failed (errno=-16) [ 27.646681] ata1: link is slow to respond, please be patient (ready=0) [ 38.106817] ata1.01: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 48.266676] ata1: link is slow to respond, please be patient (ready=0)........
  • pcnet32: eth0: transmit timed out, status 97fb, resetting - NIC card problem solution


    I've encountered this problem before and I believe it may affect other drivers (I could test but I don't have time). This was happening on my custom Linux system with the pcnet32 driver. pcnet32: eth0: transmit timed out, status 97fb, resetting (and some other kernel module tracing in dmesg) Basically it means the card is connected (it shows connected in full duplex etc.. and recognized if the cable is disconnected too) but no packets can be sent or received........
  • SSH error slow login debug1: An invalid name was supplied Cannot determine realm for numeric host address - Solution


    debug1: An invalid name was supplied Cannot determine realm for numeric host address debug1: Local version string SSH-2.0-OpenSSH_4.3p2 Debian-9etch3 debug1: An invalid name was supplied Cannot determine realm for numeric host address debug1: An invalid name was supplied A parameter was malformed Validation error Solution, disable auth from the ssh client (this is a client side error)........
  • Asus VE247H 23.7" Inch LCD/LED Backlit Monitor Dead/Stuck Pixel Policy Complaint


    I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen. I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........
  • Linux Ubuntu Nvidia GT430 Lockups/Errors/Freezes NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context


    I'm running Ubuntu 10.10 with Asus NVIDIA GT430 2.6.35-32-generic-pae #65-Ubuntu SMP Tue Jan 24 14:06:16 UTC 2012 i686 GNU/Linux Nvidia binary driver: 260.19.06 The screen sometimes completely freezes and locks up or everything starts going very slow: [1903398.100007] NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context [1903402.373210] NVRM: Xid (0001:00): 53, CMDre 00000000 00000080 00000000 00000005 00........
  • Xen non-HVM container won't work/boot anymore


    One of my test Centos 5 containers was on a partition that filled up and it threw all sorts of errors and stopped responding but now I can't boot it again anymore. All the console shows is the Linux Penguin on the top left corner and the xm console says "usbcore: registered new driver hub" and has halted there. Centos 5 Xen container stuck/frozen won't boot on "usbcore: registered new driver hub" Another great way of troubleshooting is booting fro........
  • Skype Linux/Ubuntu Sound Echo/Distortion Poor Quality Problem Fix Solution


    This was very annoying but has a simple fix, I had an echo and the voice quality was absolutely horrible (it sounded like tin cans under water) if that helps describe it. It was extremely distorted. The simple Skype sound quality solution Go to "Options" -> "Sound Devices" Disable the "Allow Skype to automatically set my mixer levels" After doing this the sound qua........
  • Ubuntu 10.04 Flash Videos have tearing/lines Solution


    This is what I call a ridiculous bug in compiz that causes it. The solution/To fix it just install "compizconfig-settings-manager" Open it up and Navigate to General Options -> Display Settings Set the "Refresh Rate" to the current refresh rate of your monitor. For ATI cards with slow window dragging/response supposedly disabling "Sync to VBlank" fixes that but otherwise leave it as is.........
  • What's Needed To Fix Linux


    I really am a Linux fan but my comments here may not show it. Although I'm quite familiar with Linux CLI to administer servers, I find Linux GUI OS's like Ubuntu at times very clunky. This is partially because there's no such thing as a "self-made" Linux from scratch where the UIwas designed by a single team. Linux is made up of several different projects that are generally completely separate and this lack of integratiion is a key issue that makes things f........
  • iptables block torrents/torrenting


    This is a very basic method and won't work in all cases but will reduce the chance of torrenting/abuse by your server users. iptables -A INPUT -p tcp --destination-port 6881:6999 -j REJECT iptables -A OUTPUT -p tcp --source-port 6881:6999 -j REJECT........
  • OpenVPN don't use bridgestart.sh or bridge at all use iptables


    I used the suggested script to bridge from OpenVPN and it took my client's server off-line! Don't ever use their "sample" scripts if you don't have another way of accessing the server than SSH. I actually found it easier to use iptables to tell it to route IPs based on a certain subnet to route through eth0: iptables -t nat -A POSTROUTING -s 192.168.200.0/24 -o eth0 -j MASQUERADE Replace "192.168.200.0/24" with your subnet of cour........
  • Drupal/MySQL database error: PDOException: SQLSTATE[42000] [1044] Access denied for user 'db_user'@'localhost' to database 'dbname' in lock_may_be_available() (line 167 of /home/user/public_html/includes/lock.inc).


    PDOException: SQLSTATE[42000] [1044] Access denied for user 'db_user'@'localhost' to database 'dbname' in lock_may_be_available() (line 167 of /home/user/public_html/includes/lock.inc). The username and password were correct but some reason CPanel added the user with no permissions! Edit the user's permissions to include "All" from Cpanel or MySQL and that is the solution.........
  • How To Burn ISO Image using cdrtools/dvdrtools for Linux/Unix Ubuntu/Debian/RHEL/Centos etc..


    It really is as simple as: cdrecord -v dev=/dev/sr0 pathtoyourisoimage.iso -v is for verbose, I prefer it but if you don't you won't see as much output like below (I like to know the details and exactly what's happening) dev=/dev/sr0 specifies the device name of your burner (they say not to use it and to specify some weird annoying device string but using the raw /dev has always worked for me and is how it should have been implemented from the start IMHO)........
  • Ubuntu Suspend Solution Fix blank screen laptop/computer won't come back


    Even in new versions of Ubuntu this happens but for me I found out it was because of one feature under "Power Management". I had "Spindown hard disks when possible" ticked, after disabling that, my computer wakes up from suspension every time now. So if your computer won't unsuspend with any version of Ubuntu/*Nix try disabling the spin down hard disk option as it's obviously the culprit for many situations.........
  • gocr - free Linux OCR (Optical Character Recognition) conversion tool


    gocr works great and it's simple, just invoke it like so: gocr filename.png The output will be printed to the screen. My only complaint/concern is that even with standard terminal output (not scanned) from a printscreen, gocr does make mistakes by inserting extra spaces where they don't belong, mistaking letters for numbers etc.. but it's definitely enough to be readable and figure out what you're looking at. I haven't tested yet with scanned input........
  • vi disable color syntax highlighting/can't read syntax highlighting


    Within vi if you can't exit /etc/vim/vimrc you can type :syntax off And to turn it back on: :syntax on Many of us have a dark/black background in our terminal/shell making the default syntax unreadable, the solution is to either turn off syntax highlighting with :syntax off or to enable a special option in /etc/vim/vimrc Edit /etc/vim/vimrc The "syntax on" enables the highligh........
  • wget download all files on page/directory automatically recursively


    Have you ever found a website/page that has several or perhaps dozens, hundreds or thousands of files that you need downloaded but don't have the time to manually do it? wget's recursive function called with -r does that, but also with some quirks to be warned about. If you're doing it from a standard web based directory structure, you will notice there is still a link to .. and wget will follow that. Eg. let's say you have files in http://serverip/documen........
  • rpmforge: [#### ] 471/10722Segmentation fault yum[18934]: segfault at 0000000000000000 rip 00002ade62153a30 rsp 00007fff76f9fe58 error 4


    A few days ago this happened on multiple Centos 5 servers and apparently anyone using rpmforge was affected by this error and there was no solution other than disabling that repo to fix it. To some this highlighted a few points, that there is a reason RHELexists with full paid support, and also that this could be a vulnerability and huge flaw with yum. A yum search or install should not segfault just because the rpmforge repo goes down. Fortunately it came back up........
  • Linux Out of Memory OOM Object Killer Solution "Out of memory: kill process 1955 (sshd) score 81 or a child"


    I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM. I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives? Also no swap space was ever used! cat /proc/s........
  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
  • smart is not smart, it thinks a dead drive is still good


    I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior: === START OF INFORMATION SECTION === Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZ20139 Firmware Version: 50.0AB50 User Capacity: 2,000,398,934,016 bytes Device........
  • Centos Solution to "Warning: Unable to open /dev/fd0 read-write (Read-only file system). /dev/fd0 has been opened read-only."


    Warning: Unable to open /dev/fd0 read-write (Read-only file system). /dev/fd0 has been opened read-only. That's a very annoying error, it's simply because Centos for some reason thinks it's wise to load the "floppy" kernel module, who has a floppy drive? I haven't seen or used a floppy for over 12 years! It's more than just annoying, if you probe the drives attached to your system, eg. with grub or partprobe, it keeps trying to locate a flopp........
  • Hitachi 2TB HDS5C3020ALA632 drive DOA


    I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead): ata1: link is slow to respond, please be patient (ready=0) ata1: softreset failed (device not ready) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: link online but device misclassified, retrying ata1: link is slow to respond, please be patient (ready=0) ata1: softreset f........
  • How to recover from dead DRBD partition/hard drive in two simple commands


    This assumes that you've at least created the correct partition for your DRBD already. Notice that I am "diskless", that's because either your DRBD partition doesn't exist/has been renamed (eg. sdb becomes sda when sdb dies and you reboot) or because that drive is really actually dead/gone. *If you need to permanently change the partition/device for your resource be sure to edit /etc/drbd.conf on both hosts and reload the config. (replace r0 with........
  • Kernel/make compilation time and how to improve compile times/compile the Linux kernel faster without hardware upgrades


    I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though. There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........
  • SPAMASSASSIN/spamcd solution - spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#2 of 3): Connection timed out


    May 6 08:16:57 devbox spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#2 of 3): Connection timed out May 6 08:17:02 devbox spamc[20214]: connect to spamd on 127.0.0.1 failed, retrying (#1 of 3): Connection timed out spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#3 of 3): Connection timed out First make sure that the spamd service is actually running, this is your spamd (spamassassin server) cannot be reached. In my c........
  • mysql enable slow query logging/Query Cache Solution - find/track cause of slow mysqld/high IO/CPU usage


    If you have a webserver and find you have high IO/lagginess MySQL is one of the first things to check. It turns out MySQL was my problem and it was creating a high load on my server, especially for IO. How to Enable MySQL Slow Query Logging To Find Slow Performance/Queries vi /etc/my.cnf Add this anywhere under [mysqld] #slow queries log-slow-queries = /var/log/mysql/mysqlslowqueries.log long_query_time = 1........
  • Apache High CPU Usage Enable Mod_Status Guide Solution - Find Cause of High CPU Usage Script/Domain


    mod_status is a great way to track down the source of high CPU usage and to find what vhost/script is the cause of it. It gives you a live view of bandwith usage, CPU usage, and memory usage broken down by domain/vhost and script/URI. Enable mod_status vi /etc/httpd/conf/httpd.conf ExtendedStatus On SetHandler server-status Order Deny,Allow Deny from all All........
  • vnstat setup guide/tutorial


    yum -y install vnstat chown nobody.nobody -R /var/lib/vnstat/ #replace venet0 below with your desired interface sudo -u nobody vnstat -u -i venet0 #edit: vi /etc/sysconfig/vnstat #VNSTAT_OPTIONS="-i venet0" # only use the sed below if you are using venet0 instead of eth0 or replace accordingly sed -i 's/eth0/venet0/g' /etc/sysconfig/vnstat [root@monitor]# yum install vn........
  • PayPal Solution - Error Detected Error Message We were unable to decrypt the certificate id. We were unable to decrypt the certificate id.


    Error Detected........
  • Dying Samsung DVDRW Drive


    My Samsung drive failed on me, at first I thought it was the enclosure but a direct SATA connection causes the same problems for discs that are inserted. It will work fine for a few minutes but then starts spewing the errors below. I've never been a fan of Korean made optical drives and have always had trouble with them. The problem is that I don't believe NEC and Lite-ON make drives anymore, and I considered them the leaders. Apr 7 11:58:48 bo........
  • monit example tutorial how to enable status checking and manipulation


    You need to enable the httpd daemon with monit to actually view the status and control, it's not only for the web interface since the httpd is theONLY way of controlling monit and viewing the status. monit monitor all will also reinstate disabled services if they've timed out too much. Just restarting the service will do nothing to re-monitor a service that monit has stopped monitoring due to too many failures. *Also note that /etc/monit.conf i........
  • 2011 Best Laptop - HP 15.6" Laptop featuring AMD Athlon II P340 Processor (G62-420CA)


    My mother needed a new laptop and I recommended her the same one I would have bought myself or my wife, that means the cheapest possible laptop with the most features for the money. This HP shines at this price point and one thing that made me stay away from buying more and recommending HP/Compaq was the poor battery life. Not anymore, this model has an industry leading up to 4 hours of battery life. Key Factors for Choosing It: HDMI Out........
  • Yahoo Mail (email) DNS Server Out Of Date Problems


    I don't expect this to be solved soon but some of Yahoo's DNS servers are out of whack. I changed the IPs of some nameservers of some domains and now most Yahoo users can't e-mail to those domains! As you can see below by the "No MX or A records for mychangedomain.com", now Yahoo's DNS/mailserver DNS cache is wrong. You would think they would at least have cached the old incorrect records, but instead for some reason their DNS cache has no entry and doesn't seem........
  • Linux High IOWAIT updatedb can't be killed and crash with mdadm


    high IO wait 424 root 39 19 1900 848 552 D 0.0 0.0 0:00.91 updatedb root 424 0.0 0.0 1900 848 ? DN Mar11 0:00 /usr/bin/updatedb -f sysfs?rootfs?bdev?proc?cpuset?binfmt_misc?debugfs?sockfs?usbfs?pipefs?anon_inodefs?futexfs?tmpfs?inotifyfs?eventp........
  • Santrex Review Scam Complaint - Stole My Money Fraud


    Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support admitted the server was not working and to wait for 24 hours. I waited for 4-days, after which they sent an e-mail saying my service was being disabled for SPAM ...(when SolusVM shows 0kb of traffic). Th........
  • Virpus Review/Scam/Complaint


    Virpus Review/Scam/Complaint Virpus is advertised on LEB (lowendbox.com). My initial payment was refunded after days of not receiving the VPS, but two subscrption payments went through and Ionly received notification after the second one. They ignored the requests in the ticket and by e-mail for a refund and even escalated the PayPal dispute that "we're assuming this is for a service that was provided" (when they obviously know otherwise by........
  • 95th Percentile Billing vs Usage Billing, what's better?


    There are all kinds of threads and links on the internet, and this seems to be a contentious issue butI don't know why. 95th percentile is either a good deal for some or a big rip off for others, Ijust said it there :) But the reality is that for MOST people who transfer low amounts of data but burst to higher speeds such as 40mbit+ even for short periods of time, then you'll pay a lot of money to do that. Basically 95th percentile is an-old archaic method........
  • Virtualbox - Failed to open a session for the virtual machine XP. AMD-V is being used by another hypervisor. (VERR_SVM_IN_USE). - Solution


    Failed to open a session for the virtual machine XP. AMD-V is being used by another hypervisor. (VERR_SVM_IN_USE). VirtualBox can't enable the AMD-V extension. Please disable the KVM kernel extension, recompile your kernel and reboot (VERR_SVM_IN_USE) Solution - Unload KVM module (you can't use two hardware virtualization suites at once) sudo rmmod kvm_amd kvm........
  • Apache MPM worker vs prefork


    find what MPM Apache is using, it will either be using "worker" or "prefork" apachectl -l Compiled in modules: core.c prefork.c http_core.c mod_so.c In my case it is "prefork" vi /etc/httpd/conf/httpd.conf Find the section that looks like this (by default one will normally exist for prefork and for worker, but in my case I only care a........
  • SPAMASSASSIN Enable Pyzor and DCC


    *Remember to restart spamassassin after all of this. DCC wget http://www.dcc-servers.net/dcc/source/dcc.tar.Z tar -zxvf dcc.tar.Z cd dcc-1.3.138/ ./configure;make;make install #enable DCC, uncomment the line that disables it near the top vi /etc/mail/spamassassin/v310.pre pyzor wget http://sourceforge.net/projects/pyzor/files/pyzor/0.5.0/pyzor-0.5.0.tar.gz/down........
  • VPS Server Scam/Review/Complaint List


    These are the only two I've encountered but here is the low-end and note my story is not at all unique. In my case I was scammed out of money and did not receive any service at all from either company. Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support adm........
  • Enable SPAMASSASSIN on Postfix in 5 minutes


    Centos 5 Postfix and SPAMASSASSIN Tutorial yum install spamassassin chkconfig spamassassin on vi /etc/mail/spamassassin/local.cf ############## #required_hits 5 #report_safe 0 #rewrite_header Subject [SPAM] #5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives require........
  • VOIP/Asterisk/FAX Error Problems Solution NOTICE[11389]: rtp.c:1808 ast_rtp_read: Unknown RTP codec 100 received from


    NOTICE[11389]: rtp.c:1808 ast_rtp_read: Unknown RTP codec 100 received from I've found that trying several times may work, but I also read changing your Sipura VOIP adapter settings as follows helps (but it still fails for me sometimes): In adapter change the following under SIP/Advanced Codec to G711a from G711u Passthru Method from: NSE to ReINVITE FAX CED Detect Enable: Yes FAX CNG Detect........
  • SPAMASSASSIN Disable OpenWhois RBL (it is dead/defunct/no longer active):


    SPAMASSASSIN Disable OpenWhois RBL (it is dead/defunct/no longer active): You might see this in your headers 2.4 DNS_FROM_OPENWHOIS RBL: Envelope sender listed in bl.open-whois.org comment out this inside /usr/share/spamassassin/72_active.cf ##{ DNS_FROM_OPENWHOIS ifplugin Mail::SpamAssassin::Plugin::DNSEval header DNS_FROM_OPENWHOIS eva........
  • Directadmin DA Install Guide


    yum -y install openssl* gcc-c++ gcc flex g++ make;wget http://www.directadmin.com/setup.sh;chmod +x ./setup.sh;./setup.sh #enable SSL /usr/bin/openssl req -x509 -newkey rsa:1024 -keyout /usr/local/directadmin/conf/cakey.pem -out /usr/local/directadmin/conf/cacert.pem -days 9999 -nodes chown diradmin:diradmin /usr/local/directadmin/conf/cakey.pem chmod 400 /usr/local/directadmin/conf/cakey.pem sed -i "s/SSL=0/SSL=1/g" /usr/local/dire........
  • ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory solution


    ls ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory This is not an ldd problem or case of anything missing, this only happened after I upradedUbuntu. declare -x PATH="/home/user/bin:/usr/local/bin:/usr/bin:/bin:/usr/games" "/home/user/bin" is the problem! It's weird because I have no idea how it happened.........
  • Openvz Enable TUN/TAP OpenVPN


    Make sure the module "tun" is loaded on the host. vzctl set 2000 --devnodes net/tun:rw --save *Note what's below is what OpenVZ says you need (but I've never had to do it) vzctl exec 2000 mkdir -p /dev/net vzctl exec 2000 mknod /dev/net/tun c 10 200 vzctl exec 2000 chmod 600 /dev/net/tun On the container test the device: when Something is wrong:........
  • OpenOffice Calc SUM function not working Solution - Result is always 0/apostrophe appears in front of all numbers.


    I right clicked all applicable cells and chose "number" but that's enough. I notice when I click the cell there is an invisible ' in front of the number: '33.64 Calc imported my CSV and decided to add a ' in front of the numeric currency values!!!*Actually the problem occurs when you right click the cells and change the type from text to number, no matter what format you choose. If I change it to be currency i........
  • SSH Tunnel Dynamic Proxy Stops Working Right Away even with Root and High Port


    I keep getting messages like this shortly after using the proxy (it works for a few seconds/page loads and then stops): channel 12: open failed: administratively prohibited: open failed I'm not sure what the issue is unless there's some kind of hardware firewall on the other end. I've used this exact configuration on multiple servers with no issue and even disabled iptables etc..........
  • MySQL NEVER delete ib_logfile0 or ibdata1 or you'll lose data


    don't delete /var/lib/mysql/ib_logfile0 or ibdata1 or mysql won't restart I didn't realize they were internal and not part of replication like the relay files! /usr/libexec/mysqld: ready for connections. Version: '4.1.22-log' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution 110127 16:31:00 [Note] /usr/libexec/mysqld: Normal shutdown 110127 16:31:00 InnoDB: Starting shutdown...........
  • MySQL Out of Range Solution for DATETIME field


    Affected rows: 0 Warning: #1264 Out of range value adjusted for column 'deleteon' at row 1 SQL query: UPDATE `custtable`.`custinfo` SET `deleteon` = '2011-02-29 00:00:00' WHERE `custinfo`.`custid` =105 LIMIT 1 ; This happened after a migration to a new SQL database due to user error. The old database server MySQL 3.23 or 4 allowed an impossible date to be entered by a user. As we know February 29th DOESNOT exist but the database al........
  • Dovecot Enable SSL/TLS with your certificate


    Dovecot enable SSL (by default it uses an old expired cert if you choose pop3s and imaps as protocols) =================== Create Cert & Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key mkdir /etc/mailssl chmod 700 /etc/mailssl cp server.* /etc/mailssl Edit /etc/dovecot.conf ssl_cert_file = /etc/mailssl/server.crt s........
  • Postfix Enable SSL/TLS with your certificate


    Create Cert & Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key mkdir /etc/mailssl chmod 700 /etc/mailssl cp server.* /etc/mailssl Postfix SSL config Edit /etc/postfix/main.cf: #SSL stuff smtpd_tls_cert_file = /etc/mailssl/server.crt smtpd_tls_key_file = /etc/mailssl/server.key To make smtps w........
  • CPU #1 not responding - cannot use it.


    I think this will be useful to others because I have a server that kept crashing mysteriously during intense disk usage/RAID checks. It would only crash during the weekly RAID integrity check. ThenI noticed during a reboot that not all CPUs were being brought up, as a result this actually creates much higher temperatures with the output I got from sensors, just booting the system produced higher than normal temperatures. You can imagine that a full blown RAID check........
  • Apache Forbidden You don't have permission to access / on this server.


    Forbidden You don't have permission to access / on this server. [Sun Jan 23 15:28:12 2011] [crit] [client 96.44.31.12] (13)Permission denied: /www/vhosts/domain.com/httpdocs/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable Solution I've done a chmod 755 .htaccess and index.php and restarted Apache That wasn't the only issue, the issue was the httpdocs direc........
  • PHP5 & Apache Blank/White Screen/Page PHP won't work


    PHP5 & Apache Blank Screen/Page The PHP package is installed and works from the CLI Error reporting is enabled The only way I could get it working was: rm /etc/php.ini yum remove php yum install php-* -x php-pear* -x php-pecl* Interestingly enough reinstalling php did not bring back the deleted php.ini but everything is working. ........
  • updatedb/mdadm caused a kernel panic?


    Jan 16 04:02:03 centosbox syslogd 1.4.1: restart. Jan 16 04:07:34 centosbox kernel: INFO: task updatedb:20771 blocked for more than 300 seconds. Jan 16 04:07:34 centosbox kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jan 16 04:07:34 centosbox kernel: updatedb D F78BE050 6476 20771 20766&n........
  • Failed to save enabled features : The Suexec command on your system is configured to only run scripts under /var/www, but the Virtualmin base directory is /home. CGI and PHP scripts run as domain owners will not be executed.


    Apache/httpd Failed to save enabled features : The Suexec command on your system is configured to only run scripts under /var/www, but the Virtualmin base directory is /home. CGI and PHP scripts run as domain owners will not be executed. This is because I never edited the Apache Config and Virtualmin config to reflect my new/current updated structure.........
  • Webmin/Virtualmin when enabling bind: Failed to save enabled features : Virtualmin is configured to setup DNS zones, but this system is not setup to use itself as a DNS server. Either add 127.0.0.1 to the list of DNS servers, or turn off the BIND fe


    Webmin/Virtualmin when enabling bind: Failed to save enabled features : Virtualmin is configured to setup DNS zones, but this system is not setup to use itself as a DNS server. Either add 127.0.0.1 to the list of DNS servers, or turn off the BIND feature on the module config page. It means what it says, add "127.0.0.1" to /etc/resolv.conf........
  • Plesk: Backup Domains from the CLI - it's quicker


    Plesk 8.6 CLI backup: /usr/local/psa/bin/pleskbackup domains domain.com This is a much better way of doing it and of course it can be scripted, it's a real pain to point, click and wait for Plesk to backup domains (and yes Iknow you could do all of them in a single client file but this is not desirable for my situation).........
  • Installing Webmin & Enabling SSL


    Webmin Setup Centos 5: wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet [1] 24229 [2] 24230 [root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html Resolving downloads.sourceforge.net... 216.34.181.........
  • Virtualmin/Webmin Postfix Error: The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..


    Virtualmin Postfix Error: The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active .. A problem was found with your Postfix virtual maps : No map sources were found in the Postfix configuration .. your system is not ready for use by Virtualmin. ........
  • SSH delay problem UseDNS and disabling GSSAPI does not help


    The normal solution doesn't help or apply here: ssh -v user@192.168.5.41 OpenSSH_4.3p2 Debian-9etch3, OpenSSL 0.9.8c 05 Sep 2006 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.5.41 [192.168.5.41] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: i........
  • Linux Realtek Gigabit NIC huge/high latency problem after sleep?


    That is pinging to the gateway IP on the same switch, the same IP is pingable externally without any problems which makes me think the switch is fine. 64 bytes from 55.55.55.55: icmp_seq=4 ttl=255 time=1.07 ms 64 bytes from 55.55.55.55: icmp_seq=1 ttl=255 time=3536 ms 64 bytes from 55.55.55.55: icmp_seq=2 ttl=255 time=2536 ms 64 bytes from 55.55.55.55: icmp_seq=3 ttl=255 time=1536 ms 64 bytes from 55.55.55.55: icmp_seq=8 ttl=255 time=1.20 ms 64 by........
  • Cygwin and crontab backups via ssh/scp/rsync


    Install the "Editors" and "Net" groups that will give you rsync, ssh, ssh-keygen and cron. The trickiest thing that I keep forgetting about each time is you have to run "cron-config" which adds the cron service to Windows, and without doing that obviously no cron jobs will be run thus making automatic backups impossible. Warning about rsync/cygwin and using the -a archive switch. It's a good thing I caught this because it doesn't work ri........
  • VBulletin How To Change Welcome E-mail


    Login as Admin Languages & Phrases -> Search in Phrases Choose "Phrase Variable Name Only" Search for: welcomemail Edit the "Translation" box with what you'd like in it.........
  • Dying Seagate 7200.11 SD15


    [137392.910057] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x80000 action 0x6 frozen [137392.910077] ata4: SError: { 10B8B } [137392.910095] ata4.00: cmd 60/20:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 16384 in [137392.910099] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [137392.910122] ata4.00: status: { DRDY } [137392.910135] ata4: hard resetting link [137393.440060] ata4: SATA link........
  • rsync preserve attributes, permissions/ownership and times without being root non-root user


    One of the purposes of rsync is to backup whole filesystems and archive them but how can you do that properly and restore things to normal if all permissions and ownerships are not preserved from your root filesystem? It's not desirable to have everything running as root, especially not just for an rsync. The Easy rsync preserve permission solution for non-root users sudo is the answer and all you have to do is edit /etc/sudoers At the end o........
  • Ubuntu/Debian DRBD 8.0 Setup Guide


    I've only used it on Centos, soI thought I'd make a quick Debian guide: Install the DRBD Package apt-get install drbd8-utils Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libswfdec-0.8-0 Use 'apt-get autoremove' to remove them. The following........
  • VMWare Server cannot connect to web interface SSL Handshake on client connection failed: SSL Exception


    VMWare log: /var/log/vmware/hostd.log SSL Handshake on client connection failed: SSL Exception sudo /etc/init.d/vmware-mgmt restart Stopping VMware management services: VMware Virtual Infrastructure Web Access VMware Server Host Agent&nb........
  • VMWare Server is on SSL port 8333


    I'm mentioning this because I keep forgetting what port the management is on for the web interface (since newer releases of VMWare server took away the superior stand alone client). So remember it is port 8333 and sometimes you need to restart vmware-mgmt service and also enable sslv2 in your Firefox or it won't connect.........
  • Outsourced VPS Support


    The Xen VPSI had was not working properly and when they asked for the login information I found the support was coming directly from India: whois 122.178.148.* [Querying whois.apnic.net] [whois.apnic.net] % [whois.apnic.net node-5] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 122.178.128.0 - 122.178.191.255 netname:&........
  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........
  • vzquota : (warning) Incorrect quota shutdown for id 2333, recalculating disk usage vzquota : (error) quota check : lstat `sess_a5078fce5f569e453ab1fb39b0fc69f8': No such file or directory vzquota on failed [1]


    first container would not come up: Starting CT 2333: service vz stop OpenVZ is locked [FAILED] 2010-11-29T23:26:23-0800 vzctl : CT 2333 : Starting container ... 2010-11-29T23:37:21-08........
  • WD EARS/Green 2TB Cannot Disable Power Saving/Head Parking with hdparm


    hdparm -B 255 /dev/sdb /dev/sdb: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well). -S set standby (spindown) timeout hdparm -S 251 /dev/sda /dev/sda: setti........
  • mdadm RAID 1 adventures


    I separated the 2 drives in the RAID 1 array. 1 is the old one /dev/sda and is out of date, while the separated other one /dev/sdc was in another drive and mounted and used with more data (updated). I wonder how mdadm will handle this: usb-storage: device scan complete md: md127 stopped. md: bind md: md127: raid array is not clean -- starting background reconstruction raid1: raid set md127 active with 1 out of 2 m........
  • WD (Western Digital) Advanced Format Drive Lagged/Slow Speed/Performance/Design Flaw EAD/EARS problem WDC WD20EARS-00S8B1


    Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive. This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series. To make it worse this is also when Western Digital introduced "Advanced Format" o........
  • Firefox plugin-container high CPU usage


    This is an easy fix and highlights a huge issue again with Linux and Flash still not playing nicely/working as well as Windows yet. Solution - Go to "about:config" and disable the two entries (set them to false): dom.ipc.plugins.enabled.libflashplayer.so dom.ipc.plugins.enabled.libnptest.so........
  • VirtualBox some USB passthrough devices greyed/grayed out unavailable solution


    The solution is simple but it's a wonder why VBOX doesn't address it directly? Perhaps newer versions will but you have to add your user to the "vboxusers" group and then login and logout and you'll see the devices you wanted but couldn't access are now available. The weird thing is that the grayed out issue doesn't happen with all devcies but one notable thing is the Apple iPhone especially in DFU or Recovery Mode which is an big issue for some people.........
  • EOL for Kubuntu/Ubuntu 8.04 - W: Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/intrepid/universe/source/Sources.gz 404 Not Found [IP: 91.189.92.171 80]


    I couldn't figure out whyI couldn't install a simple package. This is what's annoying about cutting edge Debian distros, yes we know you support each license on average for 1-2 years but why take down the supporting binary packages and basically disable the older versions? sudo apt-get install update Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find p........
  • http://apt.sw.be/redhat/el5/en/i386/test/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found Trying other mirror.


    http://apt.sw.be/redhat/el5/en/i386/test/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmforge-testing. Please verify its path and try again Notice it is complaining about "rpmforge-testing", just disable it for now: Solution is to edit the repo: vi /etc/yum.repos.d/rpmforge-testing.repo........
  • PHP Email Attachment Corrupt Solution


    I couldn't figure out why this wouldn't work, a test script in the root of my htdocs folder worked fine. Within some subdirectories the same code would produce different base64 results but I didn't know hwy. Archive: /tmp/archive.zip Zip file size: 6888 bytes, number of entries: 92 error [/tmp/archive.zip]: missing 242827681 bytes in zipfile (attempting to process anyway) error [/tmp/archive.zip]: attempt........
  • connect: No buffer space available Oct 18 12:21:03 vps kernel: printk: 177 messages suppressed. Oct 18 12:21:03 vps kernel: Neighbour table overflow.


    ping test.com connect: No buffer space available /var/log/messages Oct 18 12:21:03 vps kernel: printk: 177 messages suppressed. Oct 18 12:21:03 vps kernel: Neighbour table overflow. Solution in /etc/sysctl.conf: net.ipv4.neigh.default.gc_thresh1 = 4096 net.ipv4.neigh.default.gc_thresh2 = 8192 net.ipv4.neigh.default.gc_thresh3 = 8192 net.ipv4.neigh.default.base_reachab........
  • Openvz Error Starting OpenVZ: failed to load module vzmon [FAILED]


    service vz start Starting OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzmon: Unknown symbol fini_ve_route6........
  • OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzm


    service vz start Starting OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzmon: Unknown symbol fini_ve_route6 ........
  • DRBD WFConnection Problem/Solution


    This has stumped me a few times because I keep forgetting that Centos 5.5 comes with a default iptables configuration that ends up blocking DRBD traffic,I tried all the normal things and couldn't understand why I couldn't make my normal DRBD config work. So if you have WFConnection problems and have tried the normal "mailing list" fixes, check your firewall status first! Both Nodes Say the Following: version: 8.3.8 (api:88/prot........
  • Openvz Live Migration Error - Error: undump failed: Invalid argument Restoring failed: Error: iptables-restore exited with 2 Error: Most probably some iptables modules are not loaded Error: rst_restore_net: -22


    Adding IP address(es): 192.168.5.8 192.168.5.9 Setting CPU units: 1000 Error: undump failed: Invalid argument Restoring failed: Error: iptables-restore exited with 2 Error: Most probably some iptables modules are not loaded Error: rst_restore_net: -22 Container start failed Stopping container ... Container was stopped Container is unmounted Error: Failed to undump VE Resuming... vzquota : (erro........
  • Linux Kernel Freeze/Hang during boot on io scheduler cfq registered (default)


    You'll see the following and the boot process will freeze: io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) I have struggled with this issue on vari........
  • VirtualBox/VBOX Centos 5.5 Installation Kernel Freeze Problem "NET: Registered protocol family 2" And Solution


    NET: Registered protocol family 2 The above is the last thing that I ever saw, I tried pci=routeirq etc.. and it wouldn't work. The solution is to enable IOAPIC in the VBOX Settings Just enable "IOAPIC" in the settings for your Centos Guest and you'll find the kernel boots just fine. I wonder if a physical system might stall in this same way if the BIOS has IOAPIC disabled which many people do as a troubleshooting method. ........
  • VirtualBox OSE/VBOX Can't Access Shared Folder Solution


    I shared a directory on my hostnode/local system (running Ubuntu 10.04) with my Guest system running Windows XP. I have no idea why it's not mentioned or documented in an obvious way, but in the Windows client you just access it with "\Vboxsvr" Once you access that share you'll have access to all of the VBOX shares on your local host. I think it should indicate it somewhere when you enable the sharing. Yes, I'm sure it's buried so........
  • Ubuntu 10.04 Linux is still not ready for the Desktop world


    I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD. Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer). I'll........
  • How to Enable SMART on a device


    smartctl -a -d ata -T permissive --smart=on /dev/sda -d ata is usually required for most SATA drives or you get an error. -T permissive is required if it's the first time you are running SMART on this device (it's not enough just to enable SMART in the BIOS) --smart=on is also required for the first time........
  • OpenVZ iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Solution


    This error is annoying, in a Virtuozzo KB entry about this ip tables nat problem they say the kernel needs to be ugpraded: Symptoms The node runs 2.6.18-x kernel older than 2.6.18-028stab053.10. NAT module does not work in container, you get "can't initialize iptables table 'nat'" error: # iptables -t nat........
  • jailkit for chroot ssh account security tutorial and fix for error


    This was done on Centos butI think it's easier on Debian machines, the paths that it is set to use are tailored towards Debian, so there is some fiddling that needs to be done on Centos. This is for chrooting ssh, but jailkit has other uses than just SSH jails but I won't cover them in this writeup. 1. Install jailkit yum install jailkit 2. Setup Jail Home mkdir /home/jail chown root:root /home/ja........
  • mencoder Linux CLI video editing how to encode video file into xvid and split by time into multiple parts


    Mencoder is great, you can throw anything at it, including video files from your camera and have it encode into xvid or almost any other format. In my case I took 640x480 video from my Canon and reduced the size by 1/3 with the options below (there are many other options that you can read about in the manual but I like to keep it simple). Mencoder Encode mencoder -ovc xvid -oac mp3lame -xvidencopts fixed_quant=4 -o ........
  • mdadm when a RAID 1 member dies


    [27969.398749] sd 5:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB) [27969.398749] sd 5:0:0:0: [sdb] Write Protect is off [27969.398749] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [27969.398749] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [27972.117543] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [27972.117543] ata6.00: irq_stat 0x48000000 [27972.117543] ata6.00: cmd 60/08:00:ff:7........
  • Linux Burn MP3 CD On the Fly using


    I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project. Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is. I just want to a directory that had the MP3's I wanted t........
  • Realtek r8169 1gbit/1000mbit NIC/Ethernet Goes Down/Halts on Large File Transfer/Heavy Network Usage


    This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason? [655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........
  • RAID 5 doomed in 2009?


    http://www.tomshardware.com/news/RAID-5-Doomed-2009,6525.html I found this article interesting, it basically says that with 2TB hard drives or larger sizes, you are more likely to encounter an unrecoverable read error. But is this just another Y2K doomsday? Don't HDD's have enough advanced hardware ECC error and read recovery to prevent this from happening? I'm almost tempted to build a 3 x........
  • MySQL Insert Statement ONLY IF a duplicate entry does not exist


    This is a great way to reduce MySQL code/mistakes/annoyance when doing things, take for example this statement: INSERT IGNORE INTO sometable(CatName) VALUES("someitem"); Notice the "IGNORE", that is what does the magic. Normally if the entry "someitem" existed you'd get an error message back such as "Duplicate entry for whatever". What I have normally done in PHP or whatever language is manually coded or made a........
  • FUSE/Curlftpfs mount ftp account as drive partition in Linux


    This is a great way to use your ftp server space, for example on your web hosting account (althoughI believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect. Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc.. Name curlftpfs - mount a ftp host as a local directory Synopsis........
  • Install Mac OS X 10.4.6 Tiger on AMD32 VMWare


    *Note OS X is strange to install, I thought my HDD was not being detected by you just have to go to Diskutil and create a partition for the root filesystem and then close/move the Window and proceed with the install. After install Mac OS X 10.4.6 Tiger I get a black screen that says: b0 error Most people say the partition has to be marked as "active", actually that just means marked as "bootable". Instead of t........
  • LUKS/cryptsetup Tutorial for Linux Hard Drive Partition Encryption


    This is based on Debian Linux but should apply equally to any *nix distro. Install LUKS/crypt-setup apt-get install cryptsetup Setup your LUKS Partition Of course change /dev/md2 with whatever partition you intend to use LUKS on. cryptsetup --verbose --verify-passphrase luksFormat /dev/md2 You'll be asked to verify your decryption password twice *DO NOT FORGET THIS PASSWORD AS IT IS NOT RECOVERABLE!........
  • XBOX 360 No Sound over HDMI Solution/Fix


    My XBOX's dashboard/firmware was from sometime in 2008 when I first bought the system. I mainly played using composite cables but at my brother in law's house we used HDMI. The very first time it worked, but then I bought some games that did some update and after that HDMI never worked. The symptoms besides having on sound is that your XBOX will show PC monitor resolutions but won't have any option to say you have a 720P or 1080P display, this means the XBOX firmware is fa........
  • Use rcconf to edit startup/init.d/init scripts on Debian/Ubuntu based distributions


    I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL. Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you. apt-get install rcconf Reading package lists... Done Building dependency tree Reading state information... Done........
  • Fix Slow 2D Graphics Xorg.conf Ubuntu/Debian/Mandriva Linux


    I'm using Ubuntu 8.04 but anyone using older kernels will find this may apply to them. My Intel graphics are very slow with the default Xorg settings but by using "EXA" acceleration, scrolling down windows of text becomes pretty snappy. Just edit /etc/X11/xorg.conf Section "Device" Identifier "Configured Video Device" &nb........
  • mdadm can you downgrade the superblock?


    Why would you want to downgrade the superblock? Old mdadm verisons like mdadm 2.5.6 only use the 0.90 superblock/metadata and new versions use 1,1.0,1.1 and 1.2 superblocks by default. There are some annoying caveats with this, first of all the new superblocks (later than 0.90) CANNOT be read by GRUB, so you won't even be able to install GRUB. Even worse, old versions of mdadm CANNOT automatically detect arrays even if they were created with a new version of mdadm with th........
  • Openvz Enable Most Common iptables modules


    The default options for iptables are very basic. Here is what you need to do in order to enable them in OpenVZ. 1.) Add the modules to iptables and restart iptables: vi /etc/sysconfig/iptables-config Edit the line as so: IPTABLES_MODULES="ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp" 2.........
  • Debian 5.04 RAID 1 mdadm boot problem GRUB error


    I successfully created a single RAID 1 partition which includes /boot inside it and my root directory through the Debian installer. It said GRUB installed successfully but when I try booting the OS it seems GRUB can't read anything. When trying to boot from GRUB GRUB Loading stage 1.5. GRUB loading, please wait... Error 2 I get "Error 2" when trying to boot Debian. I also notice from a LiveCD that........
  • Unixbench Score on Core i5 750 with OpenVZ Kernel vs Xen/Openvz


    This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel. OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!) # # # # # #&n........
  • Canel Default VHOST DocumentRoot/Contents Directory is /usr/local/apache/htdocs


    This can be very annoying and CPanel doesn't seem to document it, or it's not found or made as obvious as it should be. It's always funny when I find it more difficult to work with a control panel than to do everytihng manually without CPanel or even Plesk. So once again, the default serve path for contents is: /usr/local/apache/htdocs and this is especially applicable when accessing Apache by just an IP which is unbound to any domain at this point.........
  • OpenVZ user_beancounters kmemsize failcnt Processes Timing Out/Doing Nothing/Zombie


    cat /proc/user_beancounters produces the following: kmemsize 1861537 5139870 12752512 12752512 26965041 Notice the failcnt "26965041", that is for kmemsize and at first it confused me. The system had enough guaranteed and enough burst RAM available. kmemsize is a variable indepedent of that, but who cars about the explanation right, let's just make thing........
  • SSH Automatic/Passwordless Logon - Setup Public Key Encryption In Single Command


    This is a very simple solution, but most guides out there make you login twice (once to scp the key) and once to put the key in authorized_keys. There's no need for that. If you don't already have a ~/.ssh/id_rsa.pub just type "ssh-keygen -t rsa" and keep hitting enter until it's done :) Just use this code to easily enable passwordless login with SSHD key=`cat ~/.ssh/id_rsa.pub`;ssh user@192.168.5.25 "echo $key >> ~/.ssh/auth........
  • Choose Which GCC Version to compile with via CC environment variable.


    It's very common to have multiple GCC versions for different reasons, as annoying as it is. Some newer/older programs only compile properly or at all on specific versions. You can export the following variable CC: export CC=gcc-4.1 Replace gcc-4.1 with the filename of the gcc you want eg. gcc-99........
  • Linux 2.6.33.3 Kernel Error CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function b


    CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function body not available drivers/message/fusion/mptsas.c:462: sorry, unimplemented: called from here make[3]: *** [drivers/message/fusion/mptsas.o] Error 1 make[2]: *** [drivers/message/fusion] Error 2 mak........
  • rsync halted froze Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync)


    Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync) I was surprised to see this in my dmesg whenmy rsync backup suddenly stalled/stopped. This system has 3 gigs of RAM and lots of free memory so I don't understand what is happening. rsync invoked oom-killer: gfp_mask=0x200d2, order=0, oomkilladj=0 Pid: 7600, comm: rsync Not tainted 2.6.24.2 #83 [] oom_kill_pr........
  • rsync my favorite/best/optimal default switches and options


    Not sure what rsync switches/options to use? rsync -PDrphogtl The short version would be: rsync -Pha I think these are really common sense options to use and probaby should be the default. Explanation of rsync switches P = display the progress D = hybrid of --specials and --devices so all special and device files will be copied as well. r = recursive (otherwise rsync won't copy files deeper than........
  • Seagate Drive 500GB Drive Dying


    This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART. Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device........
  • tar DON't strip/add leading slashes


    It is desirable to strip the leading slashes when taring / because you wouldn't want to overwrite your entire system when extracting some files to check. But if you are restoring / from the tar you want the leading slashes added again. Here's how to do it: --absolute-names -P Either one above will do the same thing.........
  • Seagate 7200.11 firmware defect in 500GB, 1000GB (1TB) and 1500GB (1.5TB) Hard Drives


    Seagate Inventory/Firmware Check I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate. *Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate! Seagate Inventory/Firm........
  • Linux AHCI Hotswap Tips - Remember To Reread The Partition Table WITHOUT rebooting


    From the package "parted" you can use the command "partprobe" to re-read the partition table. I really hate rebooting, and that's what Iloved to hear about AHCI motherboards, that they allow hotswap so you don't have to reboot. But that's only as good as the OS, if the OS does not reload the partition table you won't be able to do anything with that new drive you attached without rebooting. Yes, even without re-reading the partiton table Linux will........
  • nginx - the ultimate load balancer


    You can find it for free at http://nginx.org/ I find nginx is simpler to setup than pound (it's not hard but I found it unintuitive and annoying), it seemed to make some basic setups overly complicated with the config file syntax. nginx on the other hand is perfectly suited in everyway, it is even simpler to setup and seems to be the most stable and most efficient any load balancer. I would go as far as to say that a good nginx setup is more relia........
  • Linux EXT3 16GB-17GB maximum filesize issue solved/how to fix


    I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB! I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition. Here is what tune2fs tol........
  • email2fax and Asterisk to do eFaxing


    It's basically free bash shell script available from: http://wpkg.org/email2fax/index.php/Main_Page Make sure you have the required tools: libtiff ghostscript mpack/munpack Where you can e-mail your Asterisk box and it will fax it to the phone number in the subject line. The good news ends there, it is fairly undocumented and buggy. Take for example how the documentation mentions you can invoke from the com........
  • tar gzip: stdout: File too large - Error Size Limit on Large file > 17GB


    The folder I was trying to archive is about 72GB, but much like rsync at about 17GB it chokes because of the filesize. What's with so many common and essential Linux tools having such limitations? I guess it is likely that the authors never wrote their code with the idea that files would be so large but it's still very annoying. It's important to stay on top of these limitations on production servers because I didn't realize what happened until I checked the file with "........
  • Picking an FTPD (vsftpd) Server in Linux Centos/Debian


    I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find. yum search ftp Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: ftp-stud.fht-esslingen.de * base: mirrors.netdna.com * updates: updates.interworx.info * addons: yum.singlehop.com * extras: mirrors.netdna.com rpmforge........
  • Compaq V2405CA Laptop - Unixbench Performance Test


    Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics. # # # # # # # ##### ###### # # #### # # # # ## # # # #&nb........
  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
  • JavaScript how to do math arithmetic with floats and int


    JavaScript how to do math arithmetic with floats and intI have 3 variables some of which are just int and some float and need to find their sum It just adds them as strings for some reason.Normally this would work but the floats were actually text technically I guess since they came from a form. You need to convert them using parseFloat() and then everything is fine.........
  • Javascript round float to 2 decimal places


    Javascript round float to 2 decimal places[code:1:7d628eaf94] totalprice = Math.round(totalprice*100)/100;[/code:1:7d628eaf94] substitute the second instance of totalprice with the variable that needs to be rounded to 2 decimal places........
  • SSH automatic login without password


    SSH automatic login without passwordlocal> ssh-keygen -t rsa -f .ssh/id_rsa -t is the encryption type -f tells where to store the public/private key pairs. In this case, the .ssh directory on home is being used A password will be asked; leave this part blank, just pressing Now, go the .ssh directory, and you will find two new files: id_dsa and id_dsa.pub. The last one is the public part. Now, copy the public key to the serv........
  • Asterisk FreeBSD compile problems


    Asterisk FreeBSD compile problemsI couldn't get it to compile without using the following options at compile time: [b:b7d672ee28] make install WITHOUT_ZAPTEL=YES WITHOUT_MYSQL=YES WITHOUT_FAX=YES WITHOUT_ODBC=YES WITHOUT_H323=YES[/b:b7d672ee28]Some problems you might have with copying over your Linux config files to FreeBSD is different paths. [b:f044931f41]For example the etc path for Asterisk on BSD will now be:[/b:f044931f41] [qu........
  • Heredoc warnings


    Heredoc warningsExample $somevariable = ........
  • Centos 4.3 x64 & VMWare Server Beta


    Centos 4.3 x64 & VMWare Server Beta[code:1:6d0b2c8c2f] The correct version of one or more libraries needed to run VMware Server may be missing. This is the output of ldd /usr/bin/vmware: linux-gate.so.1 => (0xffffe000) libm.so.6 => /lib/tls/libm.so.6 (0xf7fbd000) libdl.so.2 => /lib/libdl.so.2 (0xf7fb9000) libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fa7000) libX11.so.6 => not f........
  • Upgrade Release Kernel Tips


    Upgrade Release Kernel TipsThis is for CentOS 3.1 to 3.8 but the methodology will apply everywhere. I ran into a problem first of all with a non-booting system after running #yum update centos-release It took me to 3.8 and upgraded all the other packages [b:7e931c835d]BUT[/b:7e931c835d] because of some stupid flags enabled in /etc/yum.conf the KERNEL WASN'T UPGRADED SO AFTER BOOTING, WELL IT DIDN'T BOOT OF COURSE :) H........
  • Setup Static IP Address ONBOOT


    Setup Static IP Address ONBOOTAssuming you are using eth0 Note this will work for any version of CentOS and basically any version of Redhat Linux or Redhat based distribution. You would need to create a new file [code:1:02f8d34c30] /etc/sysconfig/network-scripts/ifcfg-eth0:0[/code:1:02f8d34c30] DEVICE=eth0:0 the ":0" at the end specifies alias 0 we could actually change this to ":99" or "........
  • Telus + 2Wire 2700 Router Horrible


    Telus + 2Wire 2700 Router HorribleWell first of all let me say this is the only router/switch that sometimes seems to crash/disconnect computers on the local network. This device also thought it would be smart to block VOIP packets coming from my Sipura ATA VOIP adapters so I disabled the [quote:cb89ba7bff]"Invalid TCP Flag Attacks (NULL/XMAS/Other)"[/quote:cb89ba7bff] option Then all of a sudden I couldn't get onto any web pages, the wireless........
  • Need identd for port 113 ? Install authd


    Need identd for port 113 ? Install authdyum install authd Happy identing :)Actually it's not that simple. It installs as an "xinetd" service and is disabled and turned off by deafult. To enable it run: [code:1:8c94df8319] chkconfig --level 3 auth on service xinetd restart [/code:1:8c94df8319] This will set identd aka authd to start by default. service xinetd resta........
  • Updating yum repos for DAG /etc/yum.repos.d


    Updating yum repos for DAG /etc/yum.repos.dIn /etc/yum.repos.d [quote:96456b2ab9]Create any file such as "CentOS-Dag.repo" in /etc/yum.repos.d[/quote:96456b2ab9] Add the following to the above file: [code:1:96456b2ab9] [dag] name=Dag RPM Repository For Red Hat Enterprise Linux baseurl=http://dag.atrpms.net/redhat/el$releasever/en/$basearch/dag/ http://dag.freshrpms.net/redhat/e........
  • Linux Unix Xorg X Server Intel Extreme i810 Graphics Problem


    Linux Unix Xorg X Server Intel Extreme i810 Graphics Problem(EE) I810(0): No Video BIOS modes for chosen depth. (EE) Screen(s) found, but none have a usable configuration. I have a new Dell PC with one of the latest Intel Extreme Graphics on-board crap. From what I can see any Linux/Unix/FreeBSD versions running XFree86 or Xorg from years ago or the latest version today will have this problem. It's easily corrected FOR MOST people. Go into your........
  • How to compile in Windows/DOS


    How to compile in Windows/DOSMingW is a free compiler project so start here: http://www.mingw.org/download.shtml#hdr2 I downloaded the core GCC compiler: http://prdownloads.sf.net/mingw/gcc-core-3.4.2-20040916-1.tar.gz?download But it's missing even the standard C runtime libraries like "stdio.h"! You may also need to add environment variables from the DOS command line. Here is a simpl........
  • Quick Tutorial On Starting A Web Site


    Quick Tutorial On Starting A Web Site[b:3cef3c01b6]Step 1.[/b:3cef3c01b6] Purchase a Domain Name (eg. yoursite.com) [b:3cef3c01b6]Step 2.[/b:3cef3c01b6] Design your site using a program such as Microsoft Frontpage or Macromedia Dreamweaver. If you are unable or unfamiliar with doing this you may want to hire a company to create your site (many of them will handle each aspect of setting up your site). [b:3cef3c01b6]Step 3.[/b:3cef3c01b6] Host your site........
  • The New Chips on the Block


    The New Chips on the BlockThe New Chips on the Block By Bruce Gain Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html 02:00 AM Jun. 13, 2005 PT We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........
  • Intruder detection device uses behavioural analysis


    Intruder detection device uses behavioural analysisIntruder detection device uses behavioural analysis by Antony Savvas Monday 13 June 2005 Symantec is introducing a new intrusion detection product that uses behavioural analysis to block potential attacks on enterprise networks. The new Critical System Protection 4.5 system uses technology that Symantec acquired through last years purchase of Platform Logic. It is designed to protect deskt........
  • Become your own ISP!


    Become your own ISP!http://waverider.com/ I would link to the exact product I am mentioning but it's under Products/5.8Ghz because I can't find the exact URL because of their annoying javascript and frames (you'll see what I mean). The exciting thing is that this unit can supposedly be up to 72mbit, it is NOT line of sight and the range is up to 20miles. I wonder how real world speeds and range would actually be and if it is reliable. I j........
  • Trouble connecting between Windows XP and Windows 98 Shares


    Trouble connecting between Windows XP and Windows 98 SharesOk a few things to check for: * Disable all firewalls * Make sure NetBEUI is enabled on both computers * Make sure the Windows XP computer has the name of the computer logged in user of Windows 98 added as an XP user * Add the XP user to anything you want to share That fixed my problem........
  • Changing field names


    Changing field names[quote:91ea6831b6]ALTER TABLE [u:91ea6831b6]table_name[/u:91ea6831b6] CHANGE [i:91ea6831b6]existing_field_name[/i:91ea6831b6] [b:91ea6831b6]new_field_name[/b:91ea6831b6] INT(11);[/quote:91ea6831b6]........
  • PHPBB Drop All Tables


    PHPBB Drop All TablesSQL Syntax: [quote:75acd496c1]drop table phpbb_auth_access, phpbb_banlist, phpbb_categories, phpbb_config, phpbb_confirm, phpbb_disallow, phpbb_forum_prune, phpbb_forums, phpbb_groups, phpbb_posts, phpbb_posts_text, phpbb_privmsgs, phpbb_privmsgs_text, phpbb_ranks, phpbb_search_results, phpbb_search_wordlist, phpbb_search_wordmatch, phpbb_sessions, phpbb_smilies, phpbb_themes, phpbb_themes_name, phpbb_topics, phpbb_topics_watch, phpbb_user_group, p........
  • REMOVE a field


    REMOVE a field[quote:effdb203d8]ALTER TABLE table_name DROP field_name[/quote:effdb203d8]........
  • Create Table with structure of another existing table


    Create Table with structure of another existing tableOk, this has many valid uses such as if you need to create backups or the ability to undo changes, you would want to create new tables with the same structure as another. Here is how you do it. [i:7ed9581493] Also remember Indexes such as PRIMARY KEYS [b:7ed9581493]will not be preserved[/b:7ed9581493] so you will have to readd them manually.[/i:7ed9581493] [code:1:7ed9581493]CREATE TABLE NewName AS SEL........
  • ADD PRIMARY KEY to Table


    ADD PRIMARY KEY to TableHere is an example of readding a PRIMARY KEY with an AUTO_INCREMENT field: [b:40986c2a8b]First make the field NOT NULL[/b:40986c2a8b] [code:1:40986c2a8b] ALTER TABLE tableName MODIFY FieldNAME INT(18) NOT NULL; [/code:1:40986c2a8b] [b:40986c2a8b]Create The Primary Key[/b:40986c2a8b] [code:1:40986c2a8b]ALTER TABLE tableName ADD CONSTRAINT PRIMARY KEY(FieldName);[/code:1:40986c2a8b........
  • Bash Script Info


    Bash Script Infohttp://www.faqs.org/docs/Linux-HOWTO/Bash-Prog-Intro-HOWTO.html#ss10.5 http://www.scit.wlv.ac.uk/~jphb/spos/notes/shell/shell5.html http://quong.best.vwh.net/shellin20/#LtohTOCentry-41 http://www.cactus.org/~dak/shellscript.html http://db.ilug-bom.org.in/Documentation/abs-guide/ http://pegasus.rutgers.edu/~elflord/unix/bash-tute.html http://heather.cs.ucdavis.edu/~matloff/UnixAndC/Unix/CShellII.html Since bash i........
  • Package management


    Package managementIf you're like me and often like using an older version you'll need to know this. Since all 5.x versions no longer have packages of their own you'll have to use the 5-stable The best way is to set the [b:d5e8972240]packagesite environment variable[/b:d5e8972240] like so in your [b:d5e8972240].profile [/b:d5e8972240]file [quote:d5e8972240]vi /etc/.profile[/quote:d5e8972240] Add this: [code:1:d5e897224........
  • Norton Antivirus is the worst - who would have known?


    Norton Antivirus is the worst - who would have known?http://www.software-antivirus.com/ Check the link above, that review site lists Norton as one of the ones to stay away from. With good reason too, I always wondered why Norton seemed to miss so many viruses, spyware and such. Even when it didn't, it was absolutely useless because it was either unable to delete the file and it was never able to repair or disinfect. So in essence, from my experience, N........
  • Telus Begins Enforcing Bandwidth Caps


    Telus Begins Enforcing Bandwidth CapsIt appears Telus has begun to send e-mails out and is planning on enforcing bandwidth caps of only 10gigs/month for their 1.5mbit plan and 20gigs/month for 2.5mbit The state of Canadian ISPs is horrible :( In the east coast, Bell Sympatico will allow you to have unlimited bandwidth and even Aliant will and they have 3mbit for a much more affordable price than our 2.5mbit on Telus. Telus needs to get wit........
  • Linux Kernel Error (2.6.33.1) BUG: Bad page state in process swapper - Keeps rebooting - initramfs bug


    *This is a bug with initramfs support, all kernels after around 2.6.27.54 suffer from this problem. If you try to include initramfs into your kernel (I mean actually building your binaries into the kernel) this will always happen. Obviously some code has changed in recent kernels that is present in all new kernels, it makes it impossible to boot I've tried the latest 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36, 2.6.37, 2.6.38 kernels and they all do this. I found one bug re........
  • SATA Power cable for 1U Server Solutions - Rosewill 8" SATA Power Cable Model RC-8"-PW-4P-2SA


    NewEgg is one of the few companies that stocks this great right angle 1U SATA power cable. I've purchased some no-name ones and they face the wrong way (towards the bottom of the chassis) which makes it worse/impossible than standard SATA connectors. The price is high but if you're building a 1U server and want SATA disks and don't have much space (eg. the 1U Supermicro cases) then these are simply a must and........
  • Debian/Ubuntu/Kubuntu Bash/Console/Terminal/Putty Home and End Keys Don't Work or Produce a ~


    This is a very weird, annoying and bizarre quirk with many distributions, especially Debian. The home and end keys don't work, but it's a simple fix as long as you found this article :) You just have to edit /etc/inputrc: Find the commented lines as shown below: # "e[1~": beginning-of-line # "e[4~": end-of-line *If you can't find the above, just copy and paste the code below into your inputrc, it will en........
  • Enable/Disable PHP Warnings/Logs and Errors from .htaccess with Apache


    Put what you see below into your .htaccessand it will enable errors and notices. (change on to off and 1 to 0 to disable though) php_flag display_startup_errors on php_flag display_errors on php_flag html_errors on Now you'll be able to see errors and notices but this should really only be used for debugging purposes and only temporarily as it can be a security issue since errors can reveal information you wouldn't want hacker........
  • Create/Enable SSL Certificates for Apache on Linux/Unix Systems eg. Redhat,Centos,Debian


    Shortcut/Easiest Way To Create A Self-Signed Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key Using the above, you instantly create a self-signed certificate valid for 1530 days and you can simply skip to step #5.) below. If You Need a Real SSLCertificate (eg. Equifax/Openssl) then you need to create a CSR request (you'll need to follow Steps 1.) and 2.) in order to create the CSR. You then upload the CSR Certi........
  • MySQL Error "ERROR 1045 (28000): Access denied for user"


    This happened with a select statement which writes the result to an external file. I didn't remember the privilege "FILE" must be granted on *.* for this to work successfully, it wasn't actually an authentication issue as it implies since I was already in the SQL prompt and doing the query. SELECT some_id FROM sometable INTO OUTFILE '/tmp/result.txt'........
  • How to Track Down/Find Cause of Linux high disk iowait/wa


    top - 09:34:12 up 2 days, 20:57, 2 users, load average: 1.83, 1.99, 2.03 Tasks: 59 total, 2 running, 57 sleeping, 0 stopped, 0 zombie Cpu(s): 0.3%us, 0.0%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st That 99.7% wa is iowait, it means the server is waiting for a process to complete an IOoperation or in plain English, there is a delay in........
  • Mysqld Solution - Can't init databases /usr/libexec/mysqld: Can't read dir of '/tmp/' (Errcode: 13) /usr/libexec/mysqld: Can't create/write to file '/tmp/ibyP1qUC' (Errcode: 13) 100215 7:02:24 InnoDB: Error: unable to create temporary file; errno


    100215 07:02:24 mysqld started /usr/libexec/mysqld: Can't read dir of '/tmp/' (Errcode: 13) /usr/libexec/mysqld: Can't create/write to file '/tmp/ibyP1qUC' (Errcode: 13) 100215 7:02:24 InnoDB: Error: unable to create temporary file; errno: 13 100215 7:02:24 [ERROR] Can't init databases 100215 7:02:24 [ERROR] Aborting 100215 7:02:24 [Note] /usr/libexec/mysqld: Shutdown complete 100215 07:02:........
  • Windows Vista sysprep.exe /generalize error "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation."


    I wanted to disable the "Administrator" account for security purposes and Iread some "guide" on the internet that recommended that we run "C:WindowsSystem32sysprepsysprep.exe /generalize". I also clicked the option for "Generalize" and the computer rebooted and gave some OOBE error and restarted, and now I get the error above no matter what. I read that some drivers such as ones from AVIRA AV can cause this because they're unsign........
  • Openvz "Container already locked" Error Message Solution/Fix


    I didn't find any useful information that actually fixed this. My VPS was in the "Running State" and I could not stop or restart it. I kept getting "Container already locked" no matter what Idid (I tried all the suggestions in the Google results for this error). Most of the suggestions were for Windows but I only use Linux. The other solutioins also said to restart the VZ service or even the entire hostnode and this was not acceptable to me........
  • Adventures in pre-paid SIM Cards and data GPRS/Edge/3G in China with China Mobile in Shenzhen, Guangzhou, Shanghai, Beijing and other cities


    This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far: You can purchase an "M-Zone" China Mobile pre-paid SIMCard from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all. At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........
  • iPhone Enable Tethering Manually Update ipcc Carrier Settings/Update via SSH


    Everyone says there is a "manual" way of doing it and then they tell you to use iTunes, but if you're like me, you're travelling on business in a foreign country and your laptop does not have iTunes and you don't have a way of getting it and/or don't want it. For this example I'm using the provider "du" in Dubai, UAE (United Arab Emirates) but this method works for virtually all providers. The requirements in this case to truly "manually update........
  • How To Enable 3rd/third party packages in RHEL/Redhat/Centos 4/5 Linux via RPMForge


    It's a bit of a pain that many basic third party tools that aren't put of the main Centos/RHEL repositories are not available unless you compile them or install the RPMForge Repo. *Updated 08/29 with new download location changed from apt.sw.be to rpmforge.sw.be Here's a quick, simple/cut&paste way to do it: wget http://rpmforge.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.i386.rpm rpm -i rpmforge........
  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon - Updated with GlusterFS 2.0.8 & Optimized Client Config


    The results are still not flattering and are nothing close to native performance. Unless GlusterFS has a "DRBD-like" option to delay writes over the network and to only read from the client side, I don't see how performance can ever improve much more. After doing some client optimizations Iadded more to the score: Start Benchmark Run: Sun Nov 29 00:37:44 PST 2009 00:37:44 up 3 min, 1 user, load average: 0.01........
  • Clustered/Distributed Network Filesystems, Which Ones live up to the hype?


    I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems. DRBD I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........
  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon - Updated with GlusterFS 2.0.8


    You might remember my original GluserFS/OpenVZ benchmark which produced a horrible 29.8 This is the exact same system, but using the latest 2.0.8 (with some small files patch which speeds up performance) you can see it is about 25% faster. I also haven't tuned my config files at all, but there are some settings that should increase performance on small files which I believe i........
  • yum error not working rpmdb: mmap: No such device TypeError: rpmdb open failed


    Loaded plugins: fastestmirror rpmdb: mmap: No such device error: db4 error(19) from dbenv->open: No such device error: cannot open Packages index using db3 - No such device (19) error: cannot open Packages database in /var/lib/rpm Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py&qu........
  • Tyan S2735-8M Maximum Hard Drive Limit/Not Working/Doesn't work with 1TB 1000GB hard drives


    Inever saved any of the logs, but basically no matter what OS (Linux)I used, I could not get my 1000GB hard drive to work (Seagate SATA). The BIOS recognizes the drive and fdisk -l shows the hard drive as it should. The tricky thing is that different OS's will give you different results, but don't be fooled. You can't use these larger drives for long. Iwas getting all kinds of seek/IOerrors and also messages that the port could not be read.........
  • Tyan S2735-8M motherboard/Rackable Systems 1u Server 100mbit NIC not working even when enabled in the BIOS


    Itried everything Icould think of, and of course even with the NIC enabled in the BIOS nothing was working. The light would flash when you plugin the cable for a second, but that's all. Due to another issue I'm about to post about (server is not compatible with 1TB/1000Gig Hard Drives), I updated the BIOS. I didn't even know the 100mbit NICs were not working untilI decided I should test each NIC one by one. Inoticed that only 1 server out of........
  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon


    This is very disappointing since GlusterFS markets itself as a solution to deploy VPS servers on. On the HNitself I get a Unixbench of about 360. I'm also using an SSH tunnel to secure the communications, but even before that, things seemed very slow. # # # # # # # #####&n........
  • Linux Bash Shell Cannot/Can't View File That Starts With - Dash ?


    Iwas getting really annoyed with this, I used full quotes around the filename and vi, cat, less all thought I was trying to pass the dash in the filename as an argument. I didn't realize that all you have to do is just put a dash dash "--"in front. Here's an example:cat -- "-etc-glusterfs-glusterfsd.vol.log" Without the -- you get: cat: invalid option -- c Try `cat --help' for more information. Ih........
  • Have an OpenVZ VPS/Linux Virtual Private Server and nothing works right?


    A VPS Server I had just wasn't working right, code that I migrated there just wasn't working. For example, it kept telling me the connection to the database was unsuccessful, halfway through iterating through results it already had. Then I realized it wasn't my code. Ichecked my /proc/user_beancounters and found this: cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt........
  • MySQL Restoring And Dumping/Backing UP MySQL Data/Tables/Databases


    Backing MySQL Databases Backing Up/Dumping All Mysql Databases To A Single File mysqldump --all-databases -u admin -p > allmysqldatabases.sql The "-all-databases" clause is pretty obvious isn't it? It means that it will backup all databases. The "-u admin" means login using the user "admin", if you h........
  • OpenVZ/Virtuozzo Enable Fuse in Container


    To enable Fuse to work inside a OpenVZ container it's very simple (although some people say it can't be done). Remember that on your HN(HostNode) for OpenVZ, Fuse must be installed and the module must be loaded for this to work. In addition remember that you need the Fuse package installed inside the container of course. vzctl set 2000 --devices c:10:229:rw --save vzctl exec 2000 mknod /dev/fuse c 10 229 The part that most people forget........
  • How To Save iptables firewall rules Centos/Redhat/Fedora Linux


    This is something that annoys a lot of people, fortunately the Redhat style OS's are the most simple in this respect. I disagree that Debian's way makes sense, it is more of a hackish approach in how they implement iptables. Anyway, for those who are using Redhat/Centos style OS's it is very simple. Set your rules from the shell/command prompt and to save the iptables firewall rules so they are remember/loaded on boot just run this command: service iptables........
  • Unlocked iPhone 3GS and firwmare 3.0 battery short low life horrible


    This is pretty bad, ever since my phone has been unlocked the battery life is horrible. Many others have reported this issue on provider unlocked phones and even jail broken phones. We're talking issues as bad as losing 1% every 3 minutes which is what I seem to have observed as well. For now I'm going to relock the phone, and hopefully a firmware update will address this issue. This is very annoying and it seems apparent this is also happening on 3G phones and that........
  • Why Apple should thank the jailbreakers and not patch/stop the jailbreaking exploits


    First of all, the iPhone is crippled in many ways, but most of my complaints about functionality have been addressed through the jailbreak, Ican run apps in the background of my choosing, I can install a terminal, acccess my phone through SSH and SCP and so much more. It even addresses the 15 minute e-mail problem, I installed a program called "PushMod" and now set the checking time to just 1 minute. Apple should really thank the developers for this gift, it ma........
  • iPhone Backgrounder Adds True and Real iPhone multitasking on jailbroken phones


    Apple crippled the iPhone by not allowing multi-tasking of the non-primary apps. I use SSH a lot and I don't want to close my session just to check my e-mail, etc, now an app found in Cydia called "Backgrounder" allows just that. Although it's not perfect, we installed the correct one for "3.x" iPhones and hit "Reload SpringBoard" and the hour/circle glass has just been going for minutes. It seems like it installed fine even with the crash t........
  • iPhone 3GS Jailbreak Information & Benefits


    Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore. A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly. In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........
  • iPhone 3GS 32GB "Harsh Review"


    Yes, Iadmit I finally got bitten by the hype as much as I can usually see through it all. Keep in mind this review is of the "stock" phone, no jailbreaking yet which is what really unleashes the customizability and whyI bought iPhone. I had better things to say about this phone before buying it, and it is a great phone, perhaps the best on the market by far, if not because of the Mac OS port onto the iPhone and all the apps, etc, etc. With that said........
  • Nokia N97 review, feedback and complaints


    I've had an old Blackberry for a few years and I was ready to spend some serious cash on a nice Nokia. I love the idea of the Linux based Symbian S60 OS, so I was looking at phones like the E63, E71 (both are basically the same, at least CPU/screensize although E71 is thinner, has a 3MP camera, has GPS, and has dedicated buttons to adjust the volume). Then Iheard about the N97 and what a revolution it was supposed to be and it was even compared to iPhone. To........
  • RTL8111/8168B R8169 Gigabit Link slow speeds


    This is the Intel Atom 330 motherboard with integrated Realtek Gigabit NIC (Intel Desktop Board D945GCLF2 Motherboard W/ Atom 330 1.6 GHz Dual Core Processor - Mini-ITX) I cannot achieve more than 15 MB/s, even doing a local transfer through eth0 to it's own IP. 100% 95MB 15.9MB/s 00:06 So this is not a cabling, switch or hardware issue, it seems like a driver or chipset limitation problem. Here is my........
  • SSH Slow Login even with SSHD UseDNS no parameter


    Icouldn't understand why on one system it took a few minutes to get the SSHlogin prompt when connecting to other systems. The other systems all had the UseDNS parameter set to no, which almost always resolves the login prompt delay. The reason is Ubuntu and perhaps Debian and other distributions /etc/nsswitch.conf file Edit yours to have the "hosts" line like so (notice that files and dns are the primary resolution choice........
  • SSH Server Slow/Lagged/Delayed Login Response


    This is really something the SSHServer developers should consider. The cause of this annoyance is because of failed DNS lookups on your IPaddress, which is especially common for many dedicated/col-located servers and also computers on internal NAT/private networks. The chances are this is the cause of your SSHSlow/Delayed Login problems. The easy solution to SSH Login Problems Edit /etc/ssh/sshd_config Add this line to disable r........
  • OCFS2 crash


    When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it. More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things. Output of /var/log/messages for OCFS2 Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........
  • Samba SMB Error - Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD


    Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD That happens when trying to use smbclient to connect to a share. The weird thing is that I can authnenticate just fine from Windows XP. It is partially my mistake, I forgot this share does have a password. I've tried authenticating with the correct user and also with "Guest" because this works in Windows. In Linux I ........
  • Configuring OCFS2 Clustered File System on Debian Based Linux including Ubuntu and Kubuntu


    There's a lot of information and guides on OCFS2 for RHELand Centos Linux but the package setup and configuration is slightly different and this has thrown some people off. Installing OC2FS You should install the following packages to get started: apt-get install ocfs2-tools ocfs2console Configure OC2FS In RHEL/Centos the main configuration file is located in /etc/sysconfig/o2cb However in Debian based Linux it is located........
  • 1U Servers are Loud - We Have The Quiet Solution


    I've read a lot of people complaining that their 1U servers are too loud for the office, home or whatever strange places people might want to put them. Whenever Isee the question asked, "what can be done about the noise", you'll see a myriad of silly answers like "you shouldn't have it at home or in your office at all", "1U servers are meant to be loud". These all might be valid points but they're not the solution. A good example is a........
  • Rackable Systems and their Microslice Clustered 1U Servers


    Ithink there has been a lot of negative press towards Rackable Systems. We will give their new solution credit that it is marketed very well, and comes prepackaged and ready to go. But let's cut through the hype of both sides, the people who love this concept and the people who hate it. What Rackable Systems have done is a first, to minimize space, power and costs into small servers. This is great, and many companies have already built their own servers based........
  • Bash Scripting Variable Scope Using Piped While Loop


    I've been struggling with this for awhile, wondering why all of my variables are null. Ijust realized the variables disappear after leaving this while loop. Note that I'm piping to the while loop which makes a subshell Ibelieve which is the cause of the issue: echo "$accounts"|while read thisline; do somevariable="some value" (( ++counter )) done At all costs you ne........
  • LAME MP3 Encoder Segmentation Faults


    This happened on one of my Ubuntu machines where Igot some kind of segfault on line 21 from LAME at random while encoding MP3s (a second try is fine usually). I've read that it's best to compile it from source and that has solved most issues for people. Here is my preferred configure line: ./configure --enable-mp3x --with-fileio=lame --enable-debug --with-vorbis Even with that I got a different error this tim........
  • ENOM Major Outage


    At this time we can't resolve Enom's website and all DNS requests to their 4 primary name servers are failing, although the hostnames themselves still resolve: Name Server: DNS1.NAME-SERVICES.COM Name Server: DNS2.NAME-SERVICES.COM Name Server: DNS3.NAME-SERVICES.COM Name Server: DNS4.NAME-SERVICES.COM Name Server: DNS5.NAME-SERVICES.COM You would really think Enom, bein........
  • Latest Articles

  • Cloned VM/Server/Computer in Linux won't boot and goes to initramfs busybox Solution
  • How To Add Windows 7 8 10 11 to GRUB Boot List Dual Booting
  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile
  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial
  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif
  • Linux Debian Mint Ubuntu Bridge br0 gets random IP
  • redis requirements
  • How to kill a docker swarm
  • docker swarm silly issues
  • isc-dhcp-server dhcpd how to get longer lease
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian
  • zfs and LUKS how to recover in Linux
  • [error] (28)No space left on device: Cannot create SSLMutex Apache Solution Linux CentOS Ubuntu Debian Mint
  • Save money on bandwidth by disabling reflective rpc queries in Linux CentOS RHEL Ubuntu Debian
  • How to access a disk with bad superblock Linux Ubuntu Debian Redhat CentOS ext3 ext4
  • ImageMagick error convert solution - convert-im6.q16: cache resources exhausted
  • PTY allocation request failed on channel 0 solution
  • docker error not supported as upperdir failed to start daemon: error initializing graphdriver: driver not supported
  • Migrated Linux Ubuntu Mint not starting services due to broken /var/run and dbus - Failed to connect to bus: No such file or directory solution