Step 01 - Download
Visit https://gns3.com/software/download
Click on "Linux" on the side under "Installation".........
In our example we take "sound.mp3" and convert it to .wav.
Generally Asterisk for its wave needs one audio channel (-ac 1) / mono and 8000hz (-ar 8000) instead of the standard CD/MP3 of 44100hz.
Here is the command to convert into Asterisk .wav format:
ffmpeg -i sound.mp3 -ac 1 -ar 8000 sound.wav
Errors Asterisk may give you if the format is wrong:
-- Executing [91781891@cme:3] Playback("SIP/234-000........
#Remember that you need a valid gateway IPunless the Asterisk server is on the same subnet and LAN
Set Valid Gateway IP (if you don't have one already)
ip route 0.0.0.0 0.0.0.0 GATEWAYIP
Enable VOIPTrust
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
sip
Set Credentials For Asterisk and Register To Asterisk
sip-ua........
In newer versions this is a very stubborn issue. Here is how you fix it.
Step 1 - Create networks.conf
sudo mkdir /etc/vbox/
sudo vi /etc/vbox/networks.conf
put this in:
In our case we can use the slash /16 range of 192.168.0..0, change the subnet accor........
Since newer versions of Ubuntu like 20, you will find there is no longer dynagen and that the dynamips provided is faulty and will segfault each time:
Cisco Router Simulation Platform (version 0.2.14-amd64/Linux stable)
Copyright (c) 2005-2011 Christophe Fillot.
Build date: Apr 3 2018 12:20:29
Local UUID: 3c1c0b7f-2fab-4fda-b40b-74841d1bcfe0
Instance ID set to 1.
netio_tap_create: unable to open TAP device tap1 (No such fi........
Make sure this makes sense for you but I've started to block a lot of commercial Cloud services and easily accessible providers as they are a very high source of abusive traffic. The cost savings for a lot of organizations are huge, as you now have less bandwidth usage and less resource usage from garbage/bot/malicious traffic. This mainly works for when you can be reasonably sure that your audience has no business visiting your service(s) from freely accessible commercial IP ........
Uses:
Install OS on physical drive
Linux installation VMware
Install Windows on physical drive
Boot OS from physical drive
VMware Workstation tutorial
Linux virtual machine to physical disk
Windows to Linux migration
Dual boot OS installation
Boot from external SSD
Linux, Windows, BSD installation guide
Physical drive boot OS........
yum update
Loaded plugins: fastestmirror, ovl
Determining fastest mirrors
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=container error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the onl........
A lot of times you may see when installing packages that apt will recommend packages, a lot of times when doing things like upgrading or install a new kernel, it is very smart at recommending related packages (eg. modules, headers, extras etc..)
All you need to do is add this flag to your "apt install" command:
--install-suggests........
Just export these variables:
export http_proxy="socks5://127.0.0.1:1234"
export https_proxy="socks5://127.0.0.1:1234"
The above example uses a socks 5 proxy at localhost and port 1234.
This is a great way to improve performance of some activities for things like package installation, especially if your routing is not ideal to the repos.........
Use gs or ghostscript as below, specify the output file and also the input file.
In the example below the output file is "outputfile-resized.pdf" and the input file is "original-pdf.pdf". Change the input file to the name of your pdf
gs -sDEVICE=pdfwrite -dCompatibilityLevel=1.4 -dPDFSETTINGS=/prepress -dNOPAUSE -dQUIET -dBATCH -sOutputFile=outputfile-resized.pdf original-pdf.pdf
For........
qemu: could not load PC BIOS 'bios-256k.bin'
The file exists here:
/usr/share/qemu/bios-256k.bin
It is symlinked to here:
/usr/share/seabios/bios.bin
A quick fix is manually specifying the BIOS:
-bios /usr/share/qemu/bios-256k.bin........
If you just have 1 disk per node/testing/POC then you can reduce the overall disk usage during install as below:
1.) Click on "Options" on the HDD that you want to install to.
2.) Under "hdsize" Set the Maximum Size smaller than the disk size.
In this example the disk is 60G and I set max size as 20G. This then........
If you are sure the binary/program exists, it could be that your PATH variable is broken or not set.
Just do this to set most of the common paths:
export PATH=$PATH:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
There's no risk to the above, because it just takes your current PATH variable and adds more to what is already existing.
To make this permanent you can add this to your ~/.bashrc file........
In a lot of distros, vdpau which accelerates video through the GPUis often not installed even in recent distros. This will result in Firefox with Youtube dropping frames when you check the "Stats for Nerds" and to the eye as jerky or slower video playback due to the dropped frames.
Some sites will say that because you are watching VP09 that there is no GPU support, but with vdpau installed and enabled, many GPUs will still be able to use hardware decoding for 4K........
This example is using RTL8821AU chipset from a TP-Link T2U Plus USB adapter and other similar ones should work the same.
Here's how to get this chipset RTL8821AU working in Linux.
Here's how to get RTL8812 and RTL8822 working in Linux.........
This is certainly a poor design, as you can read many seasoned admins who have updated their iDRAC only to have it killed. One possible cause is not by doing all the incremental updates, doing updates from an old iDRAC to one many revisions newer is a sure way to kill things, but even then there is no guarantee based on the amount of failures.
List of threads of people's dead iDRAC's:........
This is mainly for if you've done something silly like trying to clone a Live, running VM image. In this example, the VM initially finds grub and tries to boot but is kicked straight into initramfs rescue mode/busybox right after this.
If you've done this "silly" thing, you could have dataloss but a lot of times just using fsck will fix it as you are guaranteed at best to have some corruption and inconsistencies in the filesystem. My theory is that some files wer........
Many times just doing an update-grub may find Windows and add it to grub, but a lot of times it won't.
Create Windows in a custom grub entry like below:
sudo vi /etc/grub.d/40_custom
menuentry "Windows 10" {
set root='(hd0,0)'
chainloader + 1
}
Change Windows 10 to whatever you want to call it. For example if it was for Windows 11 you'd probably want to ca........
This guide assumes you have a working Postfix server and want it to sign with DKIM.
There are a few things we have to understand to make all of this work though, which require you to be familiar with DNS as well.
1.) Install OpenDKIM
apt install opendkim
systemctl enable opendkim
2.) Edit /etc/opendkim.conf
Syslog yes
SyslogSuccess yes
Mode&nbs........
apt install tftpd-hpa
#change TFTP_ADDRESS to by setting address to 192.168.1.1:69 or the IP you need, otherwise it will listen on all IPs and interfaces which could be a security risk.
# edit /etc/default/tftpd-hpa
TFTP_USERNAME="tftp"
TFTP_DIRECTORY="/srv/tftp"
TFTP_ADDRESS="192.168.1.1:69"
TFTP_OPTIONS="--secure"........
This sometimes happens when trying to install the EFIversion of grub to a device when you are booted into Legacy/MBR mode. It doesn't seem to occur on all machines, but some and seems somewhat BIOS dependent.
grub-install --target=x86_64-efi /dev/sda
Installing for x86_64-efi platform.
grub-install.real: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image..
grub-install.real: warning: Couldn't find physica........
[Wed Nov 01 18:47:08 2023] [error] Unable to configure verify locations for client authentication
[Wed Nov 01 18:47:08 2023] [error] SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line
[Wed Nov 01 18:47:08 2023] [error] SSL Library Error: 185090057 error:0B084009:x509 certificate routines:X509_load_cert_crl_file:PEM lib
It actually gives us a good clue that at last one component of our cert is invalid/improperl........
sysctl vm.overcommit_memory=1
echo never > /sys/kernel/mm/transparent_hugepage/enabled
echo 511 > /proc/sys/net/core/somaxconn
1:M 26 Nov 2023 21:34:33.840 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
1:M 26 Nov 2023 21:34:33.840 # Server initialized
1:M 26 Nov 2023 21:34:33.840 # WARNING overcommit_memory is set to 0! Background sa........
This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525.
Then nvidia-modeset goes to 100%
There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines.
https://forums.de........
Sometimes users take their removal drives and unplug and replug them to test what happens during the failure of a disk. However, this breaks things quite badly due to the /dev/mapper in LUKS not coming back online due to it not being closed.
In other words, generally with non-encrypted drives the process is smooth but when encrypted you may want to follow a strategy like this:
We can see below that both disks are unavailable as they were physically remov........
Have you got this error from Apache?
[notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[error] (28)No space left on device: Cannot create SSLMutex
At first glance it appears that you may be out of disk space but the issue is ipc or interprocess communication.
This will clear out the ipcs processes so things can work, this often happens during high traffic and may be a sign of DDOS.
The command below will fix it, it will list al........
Even today we see a lot of servers that have different services and ports open for rpc and this creates not only potential inward vulnerabilities but perhaps more common, the abuse of your network resources in reflective rpc queries.
To stop this problem, you should disable and remove all services relating to rpc or at least block all relevant ports for the service.
Surprisingly, there are still some providers and OS installs in Linux that install these services and leave them........
Have you ever tried mounting a partition that you exists but you get this error?
mount: /mnt: can't read superblock on /dev/sda1.
The superblock in this example was bad because the physical disk had corruption and bad blocks/sectors. However, the data was generally accessible and you can always try this trick below (with caution and no warranty).
This is specifically for filesystems that place superblocks in multiple locations, which........
PTY allocation request failed on channel 0
You may have messed up your environment and specifically under /dev you may have remounted a wrong source point or otherwise killed /dev/pts
The solution is to recreate /dev/pts or fix whatever caused it to be wiped out or broken.
In verbose mode the client may show this:
#verbose client
Authenticated to 172.16.17.2 ([172.16.17.2]:22).
debug........
This is a weird issue as sometimes when upgrading or even migrating, this could happen and the reason is simple but maybe not 100% obvious at first.
You will find that your GUIdoesn't load and most services fail to start, even logind
Here are some errors you may see:
Mar 13 22:22:23 rttbox systemd-logind[2892]: Failed to connect to system bus: No such file or directory
Mar 13 22:22:23 rttbox systemd-logind........
You start a qemu like this and another VM already started with the same .iso
qemu-system-x86_64 -enable-kvm -m 4096 -cdrom some.iso
But you get this error:
qemu-system-x86_64: Initialization of device ide-hd failed: Failed to get "write" lock
Is another process using the image [some.iso]?
It's odd because the -cdrom by default is read-only and qemu should not want or care about getting write lock on........
Is python3-pip pip3 not working anymore?
Traceback (most recent call last):
File "/usr/bin/pip3", line 11, in
sys.exit(main())
File "/usr/local/lib/python3.5/dist-packages/pip/__init__.py", line 11, in main
from pip._internal.utils.entrypoints import _wrapper
File "/usr/local/lib/python3.5/dist-packages/pip/_interna........
You may have been expecting a normal sized kernel but if you don't disable these .config options you may have a kernel that is several gigabytes.
CONFIG_SLUB_DEBUG=no
CONFIG_DEBUG_INFO=no
CONFIG_DEBUG_MISC=no
Rebuild and you should find that the kernel is the normal and as expected size.........
[ 0.206301] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x3a (or later)
[ 0.430409] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.430411] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[ 2.980359] microcode: sig=0x306f2, pf=0x1, revision=0x36
[ 2.981621] microcode: Microcode Update Driv........
Some people find it less than intuitive to do on DNSMasq and by default DNSMasq is available on 0.0.0.0 which could even be your LAN or Public IP.
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp ........
If you have du, you may want to check your bill, as you can read about a longstanding issue with fraudulent charges showing up and many users claiming they did not subscribe or solicit those offers.
These don't normally show up on new accounts, but they seem to target established users and maybe even users they suspect are not watching their phone or bills, while they are on vacation.
These charges can frighteningly happen with 0 interaction from the user despite what........
A lot of companies are unsure which solution to choose and many may not be aware of Docker Swarm as an alternative to Kubernetes. One thing that many Sysadmins find is that Docker Swarm is simply easier, quicker to setup and maintain by far than Kubernetes.........
When Is It Time to Leave Your VPS, VDS, and Dedicated Server Provider?
Choosing the right hosting solution—be it Virtu........
In today’s digital landscape, finding a reliable and secure Virtual Private Server (VPS) or Virtual Dedicated Server (VDS) goes beyond just comparing specs and prices. With increasing concerns over data privacy, security breaches, and government surveillance, the wisdom of choosing your VPS/VDS provider based on juri........
First we need a few extra packages:
apt update
apt install -y adduser libfontconfig1 musl sudo
wget https://dl.grafana.com/enterprise/release/grafana-enterprise_10.3.1_amd64.deb
Install / Enable Grafana
dpkg -i grafana-enterprise_10.3.1_amd64.deb
dpkg -i grafana-enterprise_10.3.1_amd64.deb
(Reading database ... 44309 files and directories currently installed.)
Preparin........
During a migration or other custom setup, it's possible you don't have a $HOME/Desktop and as a result the config file that controls this is set to just use your $HOME directory.
This is controlled in the file: $HOME/.config/user-dirs.dirs
As we can see below, Desktop, Downloads, Music and Pictures are set to $HOME. We can edit any of these as we like.
# This file is written by xdg-user-dirs-update
# If you want........
Normally syntax highlighting is the default behavior.
You can enable it manually by hitting :syntax on
But normally you'll have this error because of the missing package.
E319: Sorry, the command is not available in this version
Solution install the vim-gui-common package:
apt install vim-gui-common
After that you should find that the code is highli........
Proxmox's documentation shows the following here.
Which mainly just says change /etc/hosts and /etc/hostname with your new hostname.
Here's what happens if you only do that:
If you just do the above, you will find you have an inaccessible original hostname that contains those VMs and you cannot........
find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV"
Africa/Addis_Ababa
Africa/Abidjan
Africa/Blantyre
Africa/Lusaka
Africa/Casablanca
Africa/Libreville
Africa/Asmara
Africa/Bujumbura
Africa/Dakar
Africa/Lagos
Africa/Malabo
Africa/Harare
Africa/Kigali........
If you are using a hypervisor to test Proxmox (eg. Vbox) then changing the video card/display adapter can fix it.
For example VboxSVGA causes the issue but switching to VMSVGA fixes it.
For example VboxSVGA causes the issue but switching to VMSVGA fixes it.
........
configure.ac:75: error: possibly undefined macro: AC_PROG_LIBTOOL
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
autoreconf: /usr/bin/autoconf failed with exit status: 1
make: *** [/software/pixman/configure] Error 1
make: *** Deleting file `/software/pixman/configure'
yum install libtool........
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --output=aclocal.m4t
Can't exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 326.
autoreconf: failed to run aclocal: No such file or directory
make: *** [/software/pixman/configure] Error 1
Just install automake:
yum install automake........
This means the autoconf package is not installed, so we'll install it:
/bin/sh: autoreconf: command not found
yum install autoconf
On Debian
apt install autoconf........
Step 1.) Upgrade to Debian 11 first
The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful.
Step 2.) Update sources.list
Update your /etc/apt/sources.list like this:
deb http://........
If you have swarm services and dockerd is creating a high load even with the containers just being idle, the easiest solution is to upgrade to a newer docker version.
For example an identical config of 3 nodes, with Redis 5 with 30 replicas produces a load of about 1.45 in Debian 10 with Docker18.09.1
If I create the same setup on Debian 11, with Docker 20.10.5+dfsg1 then the CPU usage is low.
One other difference I wondered is the kernel. In my test setup........
If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing.
The above results in this less than obv........
This should work for most console ports of other manufacturers too. It is a quick and simple method for emegencies or deploying a few appliances/devices in a non-standard environment or small environment.
However, if this is a route thing, or the equipment is not physically close to you, it would be best to use some sort of "Terminal" server which is an IP connected switch with several serial ports built-in for this purpose. Normally they accessible by web/........
The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself.
I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all.
docker run -it --runtime=nvidia --gpus all ubuntu bash
These works for most images li........
Welcome to our in-depth guide on configuring NVIDIA GPUs with Docker on Ubuntu. This post is tailored for developers, data scientists, and IT professionals who are looking to leverage the power of NVIDIA's GPU acceleration within Docker containers.
Whether you're working on machine lea........
You'll notice that /etc/resolv.conf contains dire warners on most Linux Desktops.
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# This is a dynamic resolv.conf file for connecting local clients to the
# internal DNS stub resolver of systemd-resolved. This file lists all
# configured search domains.
#
# Run "resolvectl status" to see details about the uplink DNS servers
# currently in use........
This does not seem to be officially documented but makes sense that an overlay on an overlay does not work and is considered an unsupported filesystem as is even NTFS . Some admins/organizations try to use ecyptfs as a simple solution to encrypt the contents of Docker. Instead, you could probably........
Let's say you have a directory /mnt/raid which has files and directories inside it, but nothing is mounted to it.
Then you mount a block device such as /dev/sdh to /mnt/raid
Even though /mnt/raid has files and directories there, you can only see the mounted contents of /mnt/raid.
How do we access the original contents?
Just do a bind mount of the root filesystem to another location.
mkdir /bindmount
mount --bind / /b........
By default in most newer Windows installs, you will not be able to download files from "Internet" sites and you'll get this error "Your security settings do not allow for this file to be downloaded."
Solution to Enable Downloads in IE Internet Explorer
1.) Go to Settings (button) -> Internet options -> Security (tab)
2.) Click "Internet" and then the "Custom Level" button.
3.) Find the following section and set D........
How to check what kernel version you have/currently running?
uname -rm
5.4.0-91-generic x86_64
The above shows us that we are running 5.4.0-91-generic on the x86_64 architecture.
The safest way is to stick with the same flavor eg if you're on generic, and say on kernel 5.4.0 then it makes sense to follow what is below. However, if you are migrating or dual booting between newer hardware (eg. you got a........
The passwords are stored in the following locations on Unix/Linux:
The directory is usually inside your home like this:
~/.mozilla/firefox
logins.json contains the locations, username and password
key*.db (usually then name could be key3.db or key4.db)
Without the key file you will not see any passwords in Firefox as it is required to in order to decrypt the contents of logins.json........
request_module: runaway loop modprobe binfmt-464c Kernel panic - not syncing: No init found Pid: 1, comm: swapper/0 Not tainted
This is usually caused by a mismatch in architecture and happens frequently in development environments.
Here is a example of what caused this issue:
Your binaries are based on one architecture
Your kernel was compiled with another architecture.
Why does this happe........
A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version.
Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended):
Step 1 - Add the repo
apt-add-repository ppa:deadsnakes/ppa
If you get an error about requests then install it:........
Check your initramfs if it's missing /dev/null or /dev/console, this is likely the reason.
If you want all actual devices to be created you could also enable devtmpfs in your kernel (.config) and mount like this during init:
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
mount -t devtmpfs none /dev
But note devtmpfs will not create /dev/null or /dev/console for........
If you get this error in your logs:
add bridge failed: Package not installed
This error normally means one of two things.
1.) Is your brctl (bridge-utils) installed?
On Mint/Debian check for "brctl". If it's not there do
sudo apt install bridge-utils uml-utilities
2.) Is your bridge.ko (bridge kernel module loaded?).
On some installs I have seen that you cannot modpro........
See below in the screenshot that copy is disabled by visual mode which enables automatically:
Fix it by setting this .vimrc option:
echo "set mouse-=a" >> ~/.vimrc........
This sort of thing normally happens your python3 or pip3 has been updated, because you have to in order to use pip, but the newer pip now breaks compatibility with your old python (3.5 in this case).
There are a few solutions, the easiest is perhaps to upgrade to a newer OS with a newer distro provided Python 3 or to manually install a newer version of Python/OR use a PPA like deadsnakes that provides newer versions.
........
haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx.
haproxy is used by many large sites per Wikipedia:
HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........
This is a weird issue in Mint Ubuntu gnome that I've only seen on one system. It may happen in your terminal or your browser but one program will just refuse to allow input from the keyboard. I am not sure if it's some weird fluke on a strange keyboard by perhaps accidentally hitting a weird key combination.
In some windows the keyboard gets weird and only / and Esc seem to work.
/ brings up quick find and sometimes Esc will close it........
If you are installing ta-lib for Python and get this error then you can normally solve it by manually getting the ta-lib source files and compiling.
tar -zxvf ta-lib-0.4.0-src.tar.gz
cd ta-lib;./configure;make;make install
Collecting ta-lib
Downloading https://files.pythonhosted.org/packages/39/6f/6acaee2eac6afb2cc6a2adcb294080577f9983fbd2726395b9047c4e13ec/TA-Lib-0.4.26.tar.gz (272kB)
&nbs........
This has been a tried and true method for Windows because it is finicky with hardware changes without a reinstall (eg BSOD on boot is what happens 9/10 times unless you move to the same hardwar). Surprisingly, if you use a QEMU VM and do a standard install, it has worked in every system I've thrown the drive in afterwards.
So the play is this, use a USB SSD, physical SATA drive plugged internally or for convenience, you could use a SATA to USB adapter on another computer to perf........
1 - Install Vagrant
apt install vagrant
Make sure you have a supported Virtualization tool like Virtualbox or VMWare, Hyper-V etc.. It automatically detects and uses what you have. Virtualbox has a lot of support here with tons of images.
2 - Init Vagrant
We'll init to have a Debian 10 box by default to show how quick and easy it is.
vagrant init generic/debian10........
This seems to have changed for RHEL 8 where a normal dracut to update your initramfs creates a system that only boots for the running kernel. For example if you have Kernel 5 and then chroot into a RHEL 8 variant which uses kernel 4.18, and run dracut, it seems that by default the system will be unbootable.
It is also the case that if you move your RAID array or drives to another server that it will be unbootable, because dracut seems to only include modules needed for the curre........
This likely works for even older versions but I have only tested on 8,9,10 (11,12). It's quite impressive at how easy it is to upgrade from a very old version to the new version. I would say that Debian version upgrades are some of the quickest and smoothest of any distro.
1.) Backup your /etc/apt/sources.list
cp /etc/apt/sources.list ~
#Get your keys first, you need the latest keys for Debian 11 or it won't work:........
If you plugin your phone to your computer and enable USB File Transfer/Allow on the phone side but the contents of your phone on the computer side are empty in the file manager, you probably don't have mtp-tools.MTP or media transfer protocol is the standard protocol that most phones use to communicate over USB to the computer.
Just do this to fix it and get access to your files:
apt install mtp-tools
After that you should be a........
Virtualbox is a very powerful tool, but for some use cases it is less than optimal.
Say you are in a work, lab or other environment where you are not alone on the physical network and there could be overlap of IPs, but you need all of your VMs to be contactable from your host, VMs need to communicate with each other, and VMs need internet.
NAT Network will give you VM to VM communication and internet, however, it is buggy and unstable. It also doesn't allow host to VM co........
You can read lots of posts about this issue but there is not much information about why this is the case or how grub determines the root= device name. Some even suggest modifying grub.cfg manually which is a disaster as the next kernel update will cause grub to revert back to the device name.
For most people this won't be an issue but those using template system, automated deployments and working in embedded may run into this issue with custom embedded and created minimal kernel........
Here is an easy way to restore things if you have the starting point and size of each partition using fdisk:
In this example we pretend that /dev/sda was wiped out, but the running system still has the info in /sys/class/block/sda
Go into each partition and record the "start" and "size"
hostdev@box /sys/class/block/sda/sda1 $ cat start
2048
hostdev@box /sys/class/block/sda/sd........
Remember that control connections are established on port 1723 and then actual data is transferred over GRE protocol 47.
If you have a NAT setup this will work without special forwarding or accepting of GRE packets (normally if you are not blocking outgoing connections and accepting established and related connections).
The below two commands will get things going so PPTP and GRE work
We first load the ip_nat_pptp module which allows PPTP to work with........
Have you checked your router/firewall logs and disconcertingly see connections to an unknown IP207.246.119.209:3478 from your Grandstream VOIPphones?
You're not alone and the Grandstream forums have discussed this issue.
However, even their own staff d........
So say you happen to have 2 NICs of the exact same chipset, they will generally show up as the same name, with possibly a different revision in lspci. Normally this is not an issue if you have a server with 4 NICs, generally the eth0 to eth3 appears from left to the right (or right to left on some vendors) so it doesn't take much figuring out.
Generally if you have different chipsets for different NICs, it should be easy to know which one is eth0 or the first NIC in the OS.........
If you find your NAT Network is not working properly, the first thing you may want to do is list the networks, check their status and make sure the Network is actually started and configured as you expect (eg. is DHCP on and enabled?).
This is a long known, unresolved bug that seems to affect Version 6 randomly and disportionately on especially Mint 20/Ubuntu 18.
https://www.virtualbox.org/ticket/1474........
Are you new to the company, datacenter or a third party who is responsible for deploying a fleet of servers from scratch.
The first step is to normally login to the KVM so you can perhaps manually reinstall, PXE boot the Cloud Image or reimage/reinstall an OS but you need access to the KVM/IP or what Dell calls iDRAC.
It's common that you may have forgotten this information or that another employee or colleague has changed the info and did not tell you, that they have left the........
Do you have access to some old Tesla GPUs and want to try them at home in your Desktop or old Server? Some people have wanted to try these units for gaming but keep in mind they have no video out port, they were only meant for AI applications such as Deep Learning.
The easiest way by far is to choose an AIservice that has everything ready to go, perhaps with a bunch of Docker or Kubernetes containers. This can be done with Cloud services like Google, Amazon and many........
Later versions of ls try to be helpful and smart to prevent errors in dealing with files with spaces that were tradtionally a pain.
However if you need the raw/real filenames, this can break scripts or if you are pasting into a csv etc....
How do you make ls not add the quotes?
Add the capital "-N" switch
ls -N
You could also add an alias to make it more permanent
Do this to add it to ~/........
This is an ongoing issue even with the latest Thunderbird 102.x where attachments downloaded via IMAP just won't save or will be corrupt which is a huge interruption to workflow or if you come back later to find out the file you thought you saved is invalid/corrupt and you have perhaps deleted the e-mail.
How to solve the Thunderbird filesize attachment issue?
1. Click on "Settings". then go to "General".
2. Scroll to the bottom to find "Conf........
Sometimes due to your BIOS/EFI you may find that you have chosen "Energy Efficient" for your CPU which may effectively disable turbo mode. This is because "Energy Efficient" will often restrict or throttle your CPU to the base speed. This can impact nearly any CPU such as Intel's, AMDs, Opteron, Xeon etc...
This is of course frustrating, for example if you have a CPU that is 2.0GHz base speed but turbo to 2.5GHz, you will never hit more than 2GHz.........
Docker adds iptables rules that break a lot of things including MASQUERADE or anything that needs the FORWARD table. If NAT is not working after Docker installation, it is probably because it set the iptables FORWARD policy to DROP.
This may also make you think that your br0 or bridge is not working, but it's likely just due to what we'll mention later on below, that, Docker probably set your FORWARD chain to default DROP all packets, so nothing on your bridge ever makes it out........
It sounds intuitive that you may just move the /var/lib/docker dir to another location and symlink it back but it won't work and you'll get an error.
How to move Docker Storage the Correct Way
This assumes that you want to use /mnt/raid as the new location.
1.) Stop Docker
systemctl stop docker
2.) Move /var/lib/docker
mv /var/lib/docker /mnt/raid/
3.) Edit the Docker daemon file
Specify the path you wan........
By default it uses raw .avi which takes a lot of space and will not play on a lot of systems.
It's best to change the codec to something like MP4.
Step 1.) File -> Preferences -> Screencast in Kazam
Step 2. ) Change Record With: to H264 (MP4)
After that you'll........
Router#show license
Index 1 Feature: ipbasek9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
Lic........
Solution for python pip3 not working anymore
from pip._internal.cli.main import main
File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60
sys.stderr.write(f"ERROR: {exc}")
wget https://bootstrap.pypa.io/pip/3.5/get-pip.py
python3 get-pip.py
DEPRECATION: Python 3.5 reached the end of its life on September 13th, 20........
pip3 install requests
Traceback (most recent call last):
File "/home/user/.local/bin/pip3", line 7, in
from pip._internal.cli.main import main
ModuleNotFoundError: No module named 'pip._internal'
As a quick and temp fix call the OS installed python and not the user .local/bin installed pip3
/usr/bin/pip3 install requests
Collecting requests
Cache e........
You probably didn't do an "update-grub" and grub no longer has any proper menu entries, but before you can fix it let's try to get grub booting anyway.
If you get this lovely black grub screen here's how you can get things booting.
In my case I have a gpt partition with partition 1 and 2. Partion 1 is just my EFI / ESPand partion 2 /dev/sda2 is my root which includes /boot.
You will have to adjust this if you had a separate /boot partition.........
1.) Make sure your conf register is 0x2102
Do show version and at the very end of the output you will see the Configuration register.
show version
Configuration register is 0x2102
If the config register is not 0x2102 then enter this command:
r1#configure terminal
r1(config)#config-register 0x2102
r1(config)#end
2.) Let's Erase the NVRAM/flash........
1.) Create your EFI/ESP Partition
If you happen to have some free space on the drive already then this is easy, just create a new partition of at least 100M.
The nice thing about the EFI spec is that it must just be in the first 2.2TB of space so for most users, it means you can simply resize the last partition(downsize it by 100M) and then add an EFI partition at the end.
For example if you had this partition scheme:
/dev/sda1 = /........
How To Fix This Cisco Switch/Router Error %Error opening tftp
%Error opening tftp://10.0.2.2/network-confg (Permission denied)
%Error opening tftp://10.0.2.2/cisconet.cfg (Permission denied)
%Error opening tftp://10.0.2.2/router-confg (Permission denied)
%Error opening tftp://10.0.2.2/ciscortr.cfg (Permission denied)
%Error opening tftp://10.0.2.2/network-confg (Perm........
I've seen this bizarrely happen on a newly partitioned and custom installed Linux install, particularly if you did not properly unmount before rebooting.
You can find reports of it happening on various
How to fix the error: invalid arch-independent ELF magic.
You need to boot into Live/Rescue mode, chroot into your OS properly and then do a grub-install on each drive that nee........
If you are doing a custom deployment and image, make sure that when you rsync'd or tar'd that you didn't mess up the symlnk of /etc/mtab to /proc/self/mounts
ln --force -s /proc/self/mounts /etc/mtab
Will fix this........
This article about migrating to a CentOS 7 /8 RAID mdadm array has a lot of info but I wanted to focus specifically on what newer versions of CentOS 7 require to boot mdadm and what changes are necessary on CentOS 7.8+
CentOS 7 / 8 mdadm RAID booting requirements
This assumes you are chrooting into an existing install or using it to get a new deployment ready. However, these steps can........
If you are getting this error from systemctl "Loaded: masked (Reason: Unit hostapd.service is masked.)" we need to unmask the service.
Solution
systemctl unmask hostapd
Removed /etc/systemd/system/hostapd.service.
It's fixed
root@routerOS:/var/log# systemctl start hostapd
root@routerOS:/var/log# systemctl status hostapd
● hostapd.service - Access point and authentication server for Wi-Fi and Ethern........
Just an FYI that the installer ignores your selection of Boot Loader, as it was intended for MBR/Legacy. The installer horribly, even when choosing "Something Else" and manually partitioning and creating an EFIin your install drive, will still install grub to the first EFI partition it finds, even if you are following a guide like this to avoid wiping out the M........
There are lots of wrong answers out there perhaps for much older versions of LibreOffice.
Tools -> Options
Then under LibreOffice ->Application Colors below.
Change the Viisted and Univisted link colors
Now you should h........
In this scenario, let's say you want to clone your OS at the filesystem level and the source system (the system you want to clone from) is in use.
Doing a blind rsync / is a big problem because it uses twice as much space for no reason.
The reason for this is that with ecryptfs you have a /home/.ecryptfs directory which has the actual encrypted versions of your files and folders. However your home directory (eg. /home/someuser) is mounted.
Doing the blind rsync will ca........
It may appear to be an Xorg or lightdm/gdm/mdm error but in reality for many users with this issue, it's a driver conflict and issue. I had a system that had two GPUs, an Intel and Nvidia GPU.
The only thing that got it working was to remove the nouveau driver and blacklist it so it never came back, then the Intel GPU works fine without these issues.
Solution
sudo rmmod nouveau
add nouveau/other driver to blacklist
edit th........
Here is how Ifixed it on a Mint/Ubuntu install
1.) First download the latest AMDGPU-Pro driver from here:
https://www.amd.com/en/support
Navigate to your relevant video card:
2.) Download the installer
One issue is that by default they give you a version for the latest version of........
I've encountered this after upgrading some Debian/Ubuntu/Mint based systems for no explicable reason, although there are some bug trackers on Ubuntu that document this: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1889509
The short end of the solution is that you need to properly reinstall grub.
1.) Boot from a LiveCD
2.) Mount your root / filesystem and don't forget to mo........
Is your /var/log/journal overweight and bloated? For example a decent install of Debian 11 with most applications and services ends up being about 4.9G with the journal taking a few gigs.
du -hs /var/log/journal/
1.3G /var/log/journal/
By default in a lot of distributions there is no maximum size so it will keep growing. This is especially problematic for embedded distributions and devices, but is also a huge waste of sp........
Just use apt-cache policy to find the repo of a package:
apt-cache policy lxd
lxd:
Installed: 3.0.3-0ubuntu1~18.04.2
Candidate: 3.0.3-0ubuntu1~18.04.2
Version table:
*** 3.0.3-0ubuntu1~18.04.2 500
500 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages
&nb........
One easy way is to use lspci -k like this:
sudo lspci -k|grep modules|sort -nr|uniq
Kernel modules: snd_hda_intel
Kernel modules: shpchp
Kernel modules: pata_acpi
Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia
Kernel modules: mei_me
Kernel modules: lpc_ich
Kernel module........
Sometimes manual intervention on various Linux system's, including Debian, is required to fix things after waking up from sleep.
One persistent issue is the sound system / pulseaudio needing to be reset and not working until you do that after waking up. It's not clear if it's an OS issue itself or the sound driver, but this will fix things.
Where do we put scripts or commands that need to be used upon wakeup automatically?
/lib/systemd/syst........
If you get this error when trying to SSHto a device or machine and you never even got a password prompt:
Too many authentication failures
This means that either the remote side is configured for key auth only, OR your client side may be attempting to auth using mulitple keys, and that exceeds the amount of attempted authorizations on the remote ssh server.
If the issue is trying to auth too many times which ssh defaults to sending the keys to, you ca........
This error implies that there may be an issue with Xorg or maybe your NVIDIA GPU cannot start or initialize:
35 laptop kernel: [ 2031.857704] nvidia: loading out-of-tree module taints kernel.
35 laptop kernel: [ 2031.857724] nvidia: module license 'NVIDIA' taints kernel.
35 laptop kernel: [ 2031.857725] Disabling lock debugging due to kernel taint
35 laptop kernel: [ 2031.873280] nvidia: module verification failed: signature a........
Linux Mint offers an easy and painless upgrade path through the last 3 versions, which means no more reinstalling to stay current with the latest version.
The only catch is that you need the latest of each version, so for 18, you need 18.3 before you can go to 19, and then 19.3 (or latest), until you go to 20. However, it's really a small price to pay and on the machines we've tested, the upgrade went seamlessly each time (although sometimes video drivers/custom kernel modules l........
ID3 2.4 can cause various MP3 players, especially on vehicles or even computers, not to play or at least not to display the ID3 tags.
In many cases though, since ID3 2.4 is much different than version 2.3, it will cause some players, especially in cars like Lexus not to play. Even on the computer, you may notice if you check the properties of the MP3 that it won't open or show any details (eg. frequency, bitrate and ID3 tags).
One symptom of this in a vehicle (eg. Leuxs,........
Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows.
There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........
If you are using mint, delete the preference that stops snap from installing (as it is required for lxc)
sudo rm /etc/apt/preferences.d/nosnap.pref
1. Install lxd:
sudo apt install lxd
Issues install lxd or errors? Click here
Debian at this time does not have lxd so you'll need to use snap:
sudo apt in........
This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory.
Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage.
One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........
If your audio is not working and you got this in your syslog:
pulseaudio[13710]: [pulseaudio] sink-input.c: Failed to create sink input: too many inputs per sink.
The issue is generally caused by too many audio inputs, or in other words you have too many applications that are hooked into pulseaudio.
An easy and notorious offender is by having dozens of Firefox browser tabs open.
Solution:
Close all of your Firefox and the problem will........
This may be necessary if you have a VM or if for some reason you just want to be more efficient with your space and have the flexibility of changing your swap space at will.
What we mean is the ability to use a "swap file" or similar to the Windows "pagefile" that normally resides on the root or c: partition of Windows.
Here's all you have to do and then you to can have a single partiton with everything, including the swap file on the root partition if you........
This happens during an apt update and is related to an issue with sources.list, which is particularly troubling, if you are doing a "live-build".
P: Configuring file /etc/apt/sources.list
Hit:1 http://deb.debian.org/debian bullseye InRelease
Get:2 http://deb.debian.org/debian bullseye-updates InRelease [39.4 kB........
freshclam
ClamAV update process started at Sun Mar 20 00:30:50 2022
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.100.3 Recommended version: 0.103.5
DON'T PANIC! Read https://www.clamav.net/documents/upgrading-clamav
main.cld is up to date (version: 62, sigs: 6647427, f-level: 90, builder: sigmgr)
WARNING: getpatch: Can't download daily-26337.cdiff from db.local.clamav.net
WARNING:........
(firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory)
ExceptionHandler::GenerateDump cloned child 9743
ExceptionHandler::WaitForContinueSignal waiting for continue signal...
ExceptionHandler::SendContinueSignalToChild sent continue signal to child
[Parent 9562, Gecko_IOThread] WARNING: pipe error (40): Connection reset by peer: file /build/firefox-EymEXX/fire........
Install procps and it will install the other packages you need:
apt install procps
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
libgpm2 libncurses6 libprocps7 lsb-base psmisc
Suggested packages:
gpm
The following NEW packages will be ins........
The Best Docker Tutorial for Beginners
We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........
Have you been given a Zoom password that the meeting owner says is correct but it doesn't work anymore or never works?
If the meeting name says "Zoom Meeting" and it's not really named that (which most meetings are not), then the issue is usually that there is an initial password to be able to join, aside from the passcode. It basically means that Zoom has deauthenticated you randomly or maybe after X amount of uses, without clicking on the Join Meeting URL which contains a........
Just click on the Start Menu and go to "Startup Applications"
Then click on the "Add"Button
Now enter the command we need to open the folder/directory automatically using the filemanager
For remote SSH host (you need pub key auth for it to open without a pa........
Why choose OpenVPN instead of a firewall appliance?
OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time.
When comparing OpenVPN with traditional firewal........
In our 2024 VPS Server/Cloud Buyer's Guide, we place the location of your VPS/hosting/server as one of the priorities that is often overlooked.
2024 Update - Datacent........
The key is that you need to know the passphrase to do it, if you don't know the password for the key then you can't remove the key since it cannot be decrypted.
ssh-keygen is the easiest method and openssl can be used to manually remove the key and output it to a new file, which you can then copy back over top of the encrypted file.
After that your public key authentication will work without any password prompt because it is no longer encrypted. Make sure you understand........
These types of errors are normally caused by misconfiguration of your /etc/apt/sources.list.
In this example on Debian 10, if you didn't complete the install correctly, you will have no repos enabled and only rely on CDROM.
"Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source.
E: Package 'wget' ha........
You might assume you have a bad drive or the SATA interface/cable is bad, or the power supply is bad/weak to the drive. These are all possible issues, but definitely check your SATA cable for "twisting". It is a big issue because until the error stops or times out, your system will not boot (in my case this was the case even though the drive with the issue was not part of the OS or booting process at all).
If you run an open rig that you move around often that ha........
How To Install Wazuh Server / Quickest Installation
Wazuh (forked from the well known OSSEC project) is a full SIEM (Security Information Event Management) that works extremely well with the platforms it natively supports as an "Agent", which allows you to do scans of everything such as all processes running, CVE vulnerability check, incident reporting etc...
Prerequisites:
A lot of issues with Wazuh seem to be caused by i........
If you get an error that you aren't in the sudoers file, this typically means that your user is not designated as an admin with sudo privileges.
In plain English, when it comes to some OS's like Debian including 10,11 etc.., by default the user is created without special privileges which is contrary to how Ubuntu/Mint handle the secondary user.
Let's check the sudoers file to see the problem.........
Let's say we have an IP that is dropped by iptables 192.168.20.2
service iptables status|grep 192.168.20.2
184 DROP all -- 192.168.20.2 0.0.0.0/0
You can use iptables itself like this to list the line numbers:
iptables -L --line-numbers
Two Ways To Delete The iptables Rule........
1. Let's work from an environment where we can install Ansible on.
If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way:
sudo apt install gpg
sudo add-apt-repository ppa:ansible/ansible
sudo apt update........
This normally happens when you interrupt the install of Ceph:
pveceph install
update available package list
start installation
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
gdisk is already the newest version (1.0.6-1.1).
ceph-common is already the newest version (15.2.15-pve1).
ceph-fuse is already the newest version (15.2.15-pve1).
Some package........
Are you getting this error in Proxmox while trying to apt update or install Ceph?
apt update
Hit:1 http://security.debian.org bullseye-security InRelease
Err:2 https://enterprise.proxmox.com/debian/pve bullseye InRelease
401 Unauthorized [IP: 144.217.225.162 443]
Hit:3 http://ftp.hk.debian.org/debian bullseye InRelease ........
For a lot of reasons, it may be convenient to detach or attach live disks to a running VM without having to reboot it. Sure, you can use some network based storage, but when performance counts, attaching a new virtual disk will usually give you better throughput and lower latency in a quick testing situation.
This doesn't work, why not?
drive_add 0 if=virtio,file=/tmp/vm.qcow2,if=virtio,format=qcow2,id=rtt
Can't hot-ad........
How To Install Ceph
If you stopped an install of Ceph midway you will need to manually restart it with "pveceph install"
Remember that your VM needs to have working internet (gateway) and DNS in order to connect to the apt repo to download all of the packages that Ceph requires.
Remember to repeat these steps for each node that you want Ceph on.
........
Here is the scenario, you are using QEMU/KVM and are using something like the AC97 sound driver to pass the host audio to the guest via pulseaudio. This is useful because you can transparently pass your mic input from the host which means you can mute your microphone from the host, which prevents the guest from receiving any mic input even if unmuted.
Mute / Unmute Fix
This issue also seems to happen even if you press the mute button on the microphone and then unmute,........
Volume control will often stop working, if your sound server (normally pulseaudio) dies or restarts whether by itself or by you. The reason pulseaudio may need to be restarted is due to some sort of crash or other issue that prevents sound from working (normally restarting or doing a killall pulseaudio fixes things).
However, you will normally find at least in OS's like Ubuntu/Mint 16/18+ that you cannot control the volume whether adjusting the level, changing input/outputs and........
In newer of versions of Virtualbox, especially above 6.0 (eg. 6.1 like the example below), a lot of times the "Enable Nested VT-x/AMD-V".
If you are having this issue, you will see the option is grayed out. It doesn't mean that your computer does not support virtualization, although it is possible it is disabled in the BIOS. You can verify........
NAT Network, the VMs can communicate but your host cannot access them by default.
NAT VMs have internet but cannot communicate with each other.
Bridged is simple and allows full LAN access as if you had a physical machine plugged in but is often bad for testing, work or corporate environments and is not very portable when it comes to moving your VMs to other locations and networks.
Here is how you can use NAT Ne........
From the terminal do this:
cat /proc/cpuinfo|grep -E "svm|vmx"
You should get output like this(svm = AMD-v and vmx=Intel-VTx):
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqd........
First of all make sure that you don't have the write-lock or write-protect switch enabled on the SDCard or USB drive.
If the above is not the case, then follow these instructions:
Solution - Clear Read Only Attribute
Hit "Windows Key+R" and enter "cmd" to enter the command prompt:
Now type the following :........
The Linux Mint team has disabled it by setting an apt preference, you can edit or just remove the file:
sudo apt install snapd
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package snapd is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source........
Just install these packages and restart the VM:
1.) Enable guest-utils on the host side:
sudo apt install virtualbox-guest-utils virtualbox-guest-x11
2.) Enable guest editions on the VMside
This must be done for each VM that you want to have the guest additons for accelerated GPU performance and for drag and drop/clipboard sharing
First insert the Guest Addtions CD image........
Kubernetes Easy Beginners Tutorial/Architecture Guide
Kubernetes is known as container orchestration and we should start at explaining the container part of it.
A Container is what runs the actual application and based on an Image, and are more comparable to something like an LXC Container, Virtuozzo/OpenVZ using the Linux Kernel Namespaces feature. Containers run these images as independent, isolated operating environments under the O........
This assumes that you've already installed the relevant HWIC cards eg. Cisco Asynchronous Serial NIM
These are essentially cards that you install into your router, once installed you connect an Async cable to one of the ports on the card which normally gives you 8 console cables and are normally labelled 1 through 8.
You connect all of the cables to the devices you need (even non-Cisco devices) whether switches, routers or firewalls, they will usually work.
The real m........
There aren't too many simple guides that show you how to use commands to setup your USB or other drive as a normal bootable drive where you can easily boot custom kernels or whatever OS you would like.
1. Get the tools we need:
We install "syslinux" for MBR and "syslinux-efi" for EFI and "MBR" as we need a tool that embeds the actual MBR into our USB:
sudo apt install syslinux syslinux-efi mbr........
This was done on a 2900 but applies to all the switches of the same era.
Step 1 - Power Cycle and enter recovery mode
If you have physical access you can power cycle and hold the mode button down for 15 seconds. After that the SYS light will flash on the switch and you will see the following screenshot.
If you don't have physical access (eg. it is a datacenter swich over console only) then power cycle and hit "Ctrl+Pause/B........
It has been renamed to kde-spectacle so you install it like so:
sudo apt install kde-spectacle
You'll find it in your start menu listed as "Take Screenshot"........
Just edit your ~/.bashrc and add this at the very end:
export PS1="realtechtalk.com"
Then your prompt will look like this:
bladeblox:uptime
08:47:14 up 48 min, 1 user, load average: 1.00, 1.07, 0.96
If you wanted a dollar sign at the end then you would change it like this:
export PS1=&........
It is common that you may get access to undocumented equipment and need to reset the password. This applies to many Cisco routers whether 2600, 2900, 3900 etc...
Cisco's Guide says to hit Ctrl +Pause/Break but if it doesn't work on some devices causing people to say "cisco password reset pause break does not work", you can see Cisco's alternative key combinations here:........
This seems to be an ongoing issue that is still reproducable in the latest Ubuntu Vbox 6.x.
The default NAT Network range is usually 10.0.2.0/24. If you change this range it does not seem to work properly.
Say we change the range to 10.50.1.0/24
If you get a new lease you will find that you get an IP from the old range but the default gateway is from the new range.
........
So you're trying to browse to a properly configured Samba share but you get this error:
Unable to mount location
Failed to retrieve share list from server: Connection timed out
If your config is right, it can be due to a protocol miss-match where your client has not enabled SMB3 but by default the other side (server) has enabled it.
You can test this out to see with the smbclient tool........
Usually if you get the grub boot loader and it doesn't show any boot options, it's because grub was not installed correctly and/or the partition that it is supposed to be on has changed or does not exist. It can also happen if you install Linux to one drive, but the boot loader to another by accident, whether EFI or MBR/Legacy mode.
You can normally fix your booting/bootloader/MBR/EFI it by chrooting into your root partition:
#become root
sudo su........
Just a quick note and warning is that if you are testing to see if EFIPXE booting works on a VM, MAKE SURE it actually works. For example Iinitially tested using my Distro's QEMU 2.5+dfsg-5ubuntu10.46 and ovmf BIOS firmware (OVMF supports EFI). However, I found on old versions of QEMU (like 2.5), EFIbooting with GRUB NEVER works so it may appear that you have made a mistake when everything is fine when you boot a physi........
Enable "cli" mode equivalent in JunOS
cli
Configure Mode
configure
So rather than going to the console on a Cisco switch and typing "enable" and then "conf t", the equivalent in JunOS is "cli" and "configure".
How Do You Apply Changes You've Made?
You can make all kinds of changes to the switch, but remember they are not........
Traditionally kernels were numbered starting from 0 but by default the "new style" of grub boot loading considers each subkernel item to be different so if you have 3 entries for 4.40-148 rather than counting for 1.
To get the expected behavior let's show this example and how we can boot it
We do a grep on menuentry in /boot/grub/grub.cfg to see all of the bootable kernels rather than scrolling through loads of extra entries we don't care about (thou........
It seems that QEMU/KVM's default PS2 mouse and keyboard doesn't work right in most cases. I have especially observed issues using Ctrl+C and Ctrl+V and in Linux you may see repeated key presses in the terminal and you will wonder why you copied something and it's not in the clipboard when you try to paste. The way to temporarily fix it is to press the key that is repeating once(works in Linux but not really in Windows).
Sometimes when moving your mouse it will also s........
One simple flag to configure will create a makefile that statically links all the shared objects and embeds them instead the binary execute. This means as long as you have the same architecture that things should run.
Eg. if you have an old version of Debian with a different version of glibc, then this will solve that problem.
./configure LDFLAGS="-static"
To test that it is really statically linked run ldd:
ldd src/wget........
If you get this error, you were probably compiling some sort of binary or package and got this error. It is normally solved by installing the "gettext"package.
On Debian/Ubuntu just apt-get it:
apt-get install gettext
After that you should be able to configure and make (compile) properly.........
Many people may not be aware that you can turn commodity hardware into a Mikrotik OS and there are various options which is "CHR" (Cloud Hosted Router) which is a VMimage meant for Virtualization only (seriously, I've tried to dd the image to a physical server and it just crashed as it does not contain any drivers for physical).
One note as well if you are trying to do a baremetal install you may get an error "Error Loading Operating System" or........
How To Compile QEMU Manually (using sensible options)
1.) Download the QEMU source file you want.
wget https://download.qemu.org/qemu-4.2.0.tar.xz
2.) Extract The Source File
tar -Jxvf qemu-4.2.0.tar.xz
3.) Switch to the extracted source
cd qemu-4.2.0
4.) Make sure we have the right libraries and tools to compile QEMU manually
sudo apt install build-e........
The problem seems to be that whatever kernel and initrd you have is tied to an old version of CentOS 7 that is no longer in the current repos of most mirrors.
If you were previously able to PXEboot and install CentOS and you are sure your network and tftp are good the problem is that you have an outdated kernel and initramfs that point to a defunct version.........
yum update
Loaded plugins: fastestmirror
Setting up Install Process
Determining fastest mirrors
YumRepo Error: All mirror URLs are not using ftp, http[s] or file.
Eg. Invalid release/repo/arch combination/
removing mirrorlist with no valid mirrors: /var/cache/yum/x86_64/6/base/mirrorlist.txt
Error: Cannot find a valid baseurl for repo: base
You have mail in /var/spool/mail/root
........
kdenlive is VERY finicky especially if using an older or newer version it can cause crashes, menus not to work, features not to work, things not to work properly.
A good example is that Icould NOT get automask to work, there would be no box to control it until I did this full reset.
One caution is that your backup project files will be erased when doing this:
How to Reset kdenlive entirely
rm ~/.config/kdenlive-layoutsrc
rm........
I have a Canon MF642c and the scanner wouldn't work. I tried to use saned but it didn't work with the BJNPlike it did for some other Canon models.
Introducing sane-airscan with packages for the most common distributions: https://software.opensuse.org/download.html?project=home%3Apzz&package=sane-airscan
http........
Interestingly enough Windows 2000 works fine on QEMU 64-bit but you have to specify Pentium as your CPU otherwise it doesn't complete the install (it will not pass the detecting/setting up devices phase).
-vga cirrus is wise because it is supported by Windows 2000 and allows higher resolutions and 24-bit color.
-cpu Pentium emulates an old computer and is necessary for install to complete
-device rtl8139 is important as this oldschool Realtek 8139 NIC is supported by W........
$ ./test.sh
bash: ./test.sh: Permission denied
This happens normally because you are on a partition that was mounted as "user" and without the exec option. Also be sure to add exec at the end so no other options set noexec.
Change your fstab or add exec to your mount options:
/dev/md127 /mnt/md127 ext4 auto,nofail,noatime,rw,user,exec 0 0
........
It took a lot of fiddling to make a Huion Kamvas 13 Pro work in Linux but it simple once you know what to do. Don't bother searching as it is unlkely there is a guide out there that will actually make your tablet work.
It mainly comes down to the fact that the hid_uclogic kernel module is buggy or doesn't support MANYof these wacom based/Huion tablets properly.
What was happening with me is that Ihad the Kamvas 13 Huion setup as a secondary screen/monitor.&nb........
The problem for me is that Ihad two videos with different types of audio streams. ffmpeg would join them but they would not play past the point of the join.
So Iused mencoder like below and it joined the audio and made them both mp3 streams and it worked!
-oac mp3lame specifies the audio to be convered into an mp3 stream using the lame codec.
after the oac the two files are the ones to be joined.
the -o is the name of the outp........
A very common use case is that you don't want to waste time using a video editor that requires you to open it up and manually import the video clip and audio clip, then manually delete the old audio track and import the video and new audio. That's too much work and time since we don't want to go through the hassle.
ffmpeg is our solution, all we have to do is specify 3 variables and we're done!
-i Windows2019-Server-Noaudio.mp4 is our in........
qemu-img can convert many formats.
Here is an example of how to convert different images to different formats for QEMU-KVM
The example above converts a raw windows2019.img file from QEMU to a Virtualbox .vdi
qemu-img convert -f raw -Ovdi windows2019.img windows2019.vdi
-f raw = this means the format of the source image (instead of raw it could be vdi, vmdi, qcow2 etc..)........
The idlepc value is very important to dynamips and it is both image and often CPU dependent. There is no "magic"value that will work for all images and all CPUs so this is why I'll show you a quick and handy way.
Also don't be disappointed, some values do not work well but idlepc gives you several. For example in my example below #6 didn't help at all but #7 got me down to about 6% CPU from 99-100%.
*Befo........
This tutorial will get your router up and running using emulation tools. In this case we'll be getting a Cisco C7206 (C7200 series) VXR router going which also supports SCCP VOIP services.
dynamips is the emulator itself and dynagen is the front-end tool that helps us control everything. It is used by tools such as gns3 and eve-ng.
Together the two tools (dynamips and dynagen) allow us to create and emulate REAL router........
The best way to avoid this problem is to understand how your BIOS is setup to boot.
Often newer machines will default to U(EFI) which is different than the traditional MBR/Legacy mode.
The problem is that this may not be apparent, often a BIOS Boot Menu will show a Legacy Boot Option and EFIOption without defining it.
A good example of this is if your USB is called "Kingston" you may see in your Boot Menu "Kingston" and also "Ubuntu"........
This assumes your system is a fresh and normally working install.
What often happens is that many new devices have multiple audio outputs which are generally analog and HDMI/Digital out. Sometimes the OS defaults to the wrong one that you didn't want.
For example if your sound is supposed to play over the HDMI, perhaps the output is set to analog or vice versa.........
This happens to a lot of Nvidia users especially users of newer cards like the RTX series. If for example you are trying to boot and install Linux and you get a black and white grub2 screen instead of a nice graphical welcome installer, you probably suffer from this bug. It is normally followed by the user booting and finding they just have a blank/black screen.
Here is the quick flow of steps to fix it:
If you get a black grub scree........
Before you try to install and dual boot it is very important to understand the concept of "what boot mode your BIOS is in" and "what mode you booted the installer to".
Then follow the example of Linux Mint (but most Linux installers are very similar)to carefully understand WHERE you are installing your Boot Loader to whether that be MBR or EFI.
How Am IBooted?
First it's important to check your BIOS to see........
In QEMU 4 or higher you can no longer use the normal "-soundhw ac97" flag and it is much more complicated but here is a simple copy and paste on Linux that will just work:
-audiodev you have to use -audiodev to specify the driver and id
driver=pa
id=someid
-device you have to specify the same audiodev id you used in -audiodev and driver
-audiodev driver=pa,id=pa1 -devic........
Cannot register the hard disk '/some/path/windows-marking.vdi' {f54def00-2252-43f5-9178-0998636cad61} because a hard disk '/other-path/windows-marking.vdi' with UUID {f54def00-2252-43f5-9178-0998636cad61} already exists.
Result Code:
NS_ERROR_INVALID_ARG (0x80070057)
Component:
VirtualBoxWrap
Interface:
IVirtualBox {0169423f-46b4-cde9-91af-1e9d5b6cd945}
Callee RC:
VBOX_E_OBJECT_NOT_FOUND (0x80BB0001)........
kernel: [549267.368859] mate-terminal[7871]: segfault at 2000000101 ip 00007f5d0a9548f0 sp 00007fff7012c610 error 4 in libgobject-2.0.so.0.4800.2[7f5d0a920000+52000]
This seems to be a long-time bug in Mint mate-terminal where you sometimes move or detach a terminal and it crashes losing all of the other open terminal sessions.........
It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc..
wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866
tar -zxvf apcupsd-3.14.14.tar.gz
cd apcupsd-3.14.14
[root@somebox apcupsd-3.14.14]#
./conf........
If you've come here, don't be embarraassed, working in IT, this is the MOST common computer problem that almost everyone will encounter. The reason why I'm doing this post is because I've seen an increase from colleagues and admins having this problem and many times it's not even your fault. A common scenario is that someone acquires a new or used computer which they weren't given the password for. Fortunately Ihave a detailed list of all the options whether free or pa........
This seems to happen on most if not all Nvidia cards but the good news is that if you are using any of the Linux drivers and have the nvidia-settings tool installed it is just a simple command.
Solution:
nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }"
Enter the above command in your terminal and the screentearing will be fixed which is like enabling Tear Free on AMD cards.&........
-?????????? ? ? ? ? ? shadow
----------. 1 root root 748 Jul 10 04:35 shadow-
cat: shadow: Input/output error
If you see this you are probably in big trouble, it could be a physical error or if it's a VM image that it is corrupted due to a physical error on the underlying disk/array/NAS or it could a........
Is a mdadm check on your trusty software RAID array happening at the worst time and slowing down your server or NAS?
cat /proc/mdstat
Personalities : [raid1] [raid10]
md127 : active raid10 sdb4[0] sda4[1]
897500672 blocks super 1.2 2 near-copies [2/2] [UU]
[==========>..........] check = 50.4% (452485504/897500672) finish=15500.3min speed=478K/sec
........
/usr/libexec/qemu-kvm -enable-kvm -boot order=cd,once=dc -vga cirrus -m 4096 -drive file=~/23815135.img,if=virtio -usbdevice tablet -net nic,macaddr=DE:AD:BE:EF:D4:AB -netdev bridge,br=br0,id=net0
qemu-kvm: -usbdevice tablet: '-usbdevice' is deprecated, please use '-device usb-...' instead
access denied by acl file
qemu-kvm: bridge helper failed
[root@CentOS-82-64-minimal 23815135]# /usr/libexec/qemu-kvm -enable-kvm -boot order=cd,once=dc -vga cirrus -........
yum -y install gcc make gperf genisoimage flex bison ncurses ncurses-devel pcre-devel augeas-devel augeas readline-devel
checking for cpio... cpio
checking for gperf... no
configure: error: gperf must be installed
configure: error: Package requirements (augeas >= 1.2.0) were not met:
Requested 'augeas >= 1.2.0' but version of augeas is 1.0.0
yum remove augeas augeas-libs augeas-devel
wget http://downl........
apt install software-properties-common
add-apt-repository ppa:deadsnakes/ppa
apt update
apt install python3-pip
apt install python3.7 curl gnupg python3.7-dev git
ln -s /usr/bin/python3.7 /usr/bin/python3
pip3 install numpy keras_preprocessing
curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add -
echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........
Iam going to build this based on a series of small howto QEMU / KVMposts I've made as I feel much of the information is actually hard to find and piece together from the rest of the web.
What I'm going to focus on is how to use virtio as the NIC because if you don't you get very slow NIC speeds but with the virtio NIC model you basically get host speeds.
/usr/libexec/qemu-kvm -enable-kvm -smp 8 -m 16000 -net user -net nic,model=virtio -drive file=ubuntu-gpt2l........
Most newer distros inexplicably cause your NIC to have what Icall "random" non-standard name conventions because of systemd.
This is a big problem for many people and especially those running servers. Imagine that you have a static IPconfigured for ens33 but then the hard disk is moved to a newer system, the NIC could be anything from ens33 to enp0s1, meaning that manual intervention is required to go and update the NIC config file (eg. /etc/network/interfa........
This is caused because the user is running as qemu for virt-resize and if qemu does not have privileges to read from the source and write to the destination, it will fail with the below. So either change the uid of qemu or change the ownership of the source and target.
Solution:
export LIBGUESTFS_BACKEND=direct
virt-resize --expand /dev/sda2 /root/kvmtemplates/windows2019-eval-template.img /root/kvmguests/kvmkvmuser4515........
When authentication times out that is one thing, but when it just fails like below Asterisk by default will not re-register until you the admin reload the sip or asterisk server:
voipserver*CLI> sip show registry
Host dnsmgr Username Refresh State&........
Just run this apt install command
sudo apt install pepperflashplugin-nonfree browser-plugin-freshplayer-pepperflash
After this restart your browser and check Adobe's site to verify if your Pepper flash is working and showing at least version 32.
https://helpx.adobe.com/flash-player.html
As you'll see below it will download the latest version which is currently 32 and this was not possible with the old/crappy deprecated adobe-flash plu........
I used to believe that for Desktops especially that the "ondemand" CPUfrequency changing that kernels included with Ubuntu and Debian based distros have would be sufficient for snappy performance.
However, you can feel the lack of performance on the fastest computer if you have ondemand. A lot of times even under high load 100% of your CPUfrequency in MHz will not be used.
For example a 2.8Ghz CPUmay only run at 1.8MHz or even .9GHz. Now........
yum -y install wget unzip
wget https://download.nextcloud.com/server/releases/nextcloud-18.0.2.zip
unzip nextcloud-18.0.2.zip
yum -y install php php-mysqlnd php-json php-zip php-dom php-xml php-libxml php-mbstring php-gd mysql mysql-server
Last metadata expiration check: 0:58:02 ago on Fri 13 Mar 2020 02:12:49 PM EDT.
Dependencies resolved.
===================================================================........
This happens when upgrading to Apache 2.4 from 2.2 or just because you don't have the right permissions set which we'll get into.
You need this in the ........
pip install PIL
ERROR: Could not find a version that satisfies the requirement PIL (from versions: none)
ERROR: No matching distribution found for PIL
The import name is PILbut the actual pip package is called "Pillow"
pip install Pillow........
unable to connect to camera. Camera has been disabled becaue of security policies or is being used by other apps
They say to do a factory reset but in some cases it doesn't work and the camera mysteriously just won't work so it appears to be a hardware error if that happens.........
There are a few caveats that may not be obvious to everyone so I am going to cover them here but keep this in mind before starting.
Before starting install epel or you will be missing tesseract:
yum -y install epel-release
#1) When you specify your SSL certificate with a full path, it really needs to exist where you tell it to (including the default location of /etc/ssl/certs and /etc/ssl/c........
If you've ever gotten errors like this the solution is simple, you need i386 enabled on your 64-bit install because wine depends on some 32-bit x86 libraries:
dpkg --add-architecture i386
apt update
apt install wine
After that it will install just fine.
apt install wine
Reading package lists... Done
Building dependency tree
Reading state information... Done........
This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu!
Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........
The scenario here is that you have some sort of remote headless Linux server but would like to run some programs on them and get graphical access to them. The problem is that the remote server may be an image or VMwithout any virtual GPU and even if so, it is likely without KDE or Gnome, so there's no real way to do this, unless you follow our guide.
Install xvfb
apt install xvfb
Reading package lists... D........
If you are getting this error it is usually caused by having more than 5 keys in your ".ssh" directory. It is a bit of a bug and this is how it manifests itself.
You will find at this point that you are not given any chance to enter a password, or if you are using key based auth that the same thing happens. You'll also find that this is happening with ALLservers you try connecting to.
The solution is to move away key pairs from .ssh so that there ar........
It is unfortunate that LXC's dir mode is completely insecure and allows way too much information from the host to be seen. I wonder if there will eventually be a way to break into the host filesystem or other container's storage?
OpenVZ better security:
[root@ev ~]# cat /proc/mdstat
cat: /proc/mdstat: No such file or directory
/dev/simfs 843G 740G 61G........
Occasionally my whole screen locks up and I cannot even swith to the console and I find this in my syslog:
*-display
description: VGA compatible controller
product: Mullins [Radeon R3 Graphics]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
 ........
MySQL on Debian versions is configured differently than the native local MySQL plugin so you will be disappointed when your password on the mysql client fails by default.
Here is how you reset the MySQL root password the proper and "working way"
#first we gracefully stop mysql
sudo systemctl stop mysql;
#then we forcefully kill any mysqld process just in case
sudo killall -9 mysqld mysqld_safe;........
sudo usermod -a -G groupname username
It's really simple like above, the -a is for append so that you are not changing their main group, but adding them to another additonal group. Just change "groupname" to your group and "username" to the user you want to be added to "groupname".
A common task these days is getting your user access to kvm for virtualization so the KVM/QEMUprocess........
This is only really necessary in the case you don't want DHCP. If you are dealing with an encrypted LUKS server on the internet, you will often want to have a static IP so you know which IP to connect to (or if you have a semi-static IP assigned by DHCP).
SET IP Address by /etc/initramfs-tools/initramfs.conf
IP Address=192.168.1.27
Gateway=192.168.1.1
Subnet Mask: 255.255.255.0
Hostname=myhome.com
IP=192.1........
The reason for doing this is that the installer doesn't seem to work properly for LUKS and the server installer doesn't even support LUKS anymore. When you use the GUI install on Desktop for LUKS it won't boot and will just hang after you enter your password. So the only reliable way is to do it ourselves.
1.) Make a default minimal install of Ubuntu
2.) Have a secondary disk on the server or VM.
3.)........
Create your netplan file
vi /etc/netplan/01-netcfg.yaml
network:
version: 2
renderer: networkd
ethernets:
ens3:
dhcp4: no
........
The cool thing here is that we only need 1 drive to make a RAID 10 or RAID 1 array, we just tell the Linux mdadm utility that the other drive is "missing" and we can then add our original drive to the array after booting into our new RAID array.
Step#1 Install tools we need
yum -y install mdadm rsync
Step #2 Create your partitions on the drive that will be our RAID array
Here I assume it is /dev........
This is the reason that I don't like the new ADATA USB drives such as the UV128/64GB or 128GB drives and other ones that look to be the same style (the green sliding USB connector).
They just don't work well from new and never work properly at any point.
[ 788.242463] usb 1-1.2: new high-speed USB device number 16 using ehci-pci
[ 788.339816] usb 1-1.2: New USB device found, idVendor=125f, idProduct=db8a
[ 7........
This should work but the key thing is having the "-cpu host" flag.
Once you add the correct -cpu host flag then it should boot just fine on KVM.
qemu-system-x86_64 --enable-kvm -cpu host -smp 8 -m 8192 -drive format=raw,file=the-file.img
Examples can be found here on how to boot Windows properly with KVM.........
The problem is that by default ssh-keygen loves to generate an easy to crack 2048 bit key (RSA). Supposedly having a larger keysize helps such as 4096 or 8096 but it is thought to be useless still against Quantum computing.
How can I check my existing keysize and type?
ssh-keygen -lf /path/to/your/id_rsa.pub
The output will be something like below followed by the hash. The first number is the key size and the second part will b........
A lot of times this is actually caused by simply not having Firefox installed at all.
selenium.common.exceptions.WebDriverException: Message: Can not connect to the Service geckodriver
https://github.com/mozilla/geckodriver/issues/270........
This is not about using ssh as a proxy, but rather, using a proxy when you are SSHing to another host and using ProxyCommand (where we normally use nc as our proxy tool).
In newer versions of nc the syntax has changed to the following:
ssh -o ProxyCommand="nc -x 127.0.0.1:1234" %h %p user@host
The format must be like above in newer nc versions.
Just be sure to change the 1234 to the port of your SOC........
Symbolic link not allowed or link target not accessible: /path/httpdocs/news.html
There are a few reasons that can cause this message and this is for people who have ruled out the basics, eg. your symlinks are enabled and the right permissions are applied (but read on to learn about ownership requirements above the directory in question).
So there are a few key things here that cause Apache not to follow symlinks:........
If you just do a normal chown user.user somedir it won't work. You will see the ownership is still the previous owner.
How To Change Ownership Of Symlink:
The simplest part is just adding the -h which means no dereference so it applies the ownership on the symlink and does not try (and fail) to change ownership of the dereferenced symlink destination.
chown -h user.user somedir........
It is fairly simple to use once you know how to use it. However, the tricky thing is that by default it doesn't seem to be active or listen on any interface on manually specified.
How To Install ifplugd
First we install ifplugd
sudo apt install ifplugd
Let's enable it on our desired device(s)
vi /etc/default/ifplugd
set this line as so:........
dd is a very handy tool and there are some more practical things we can do. For example if we want to dump a 3TB drive and want to preserve it and only 200GB are being used on the 3TB we can save a lot of space with gzip.
Backing Stuff up with dd
How to Use dd to backup a raw hard drive and tar gzip at once
Change /dev/sda to the drive you want to backup
Change /mnt/extras........
The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration.
Let's manually play with vdpau to make sure it works before we make it permanent:
First make sure you have libvdpau installed:
sudo apt install vdpau-driver-all
If yo........
I find that the default settings for the radeon driver that is applied to most AMD cards is horrible. For example by default TearFree is not enabled and it causes videos to have some kind of square artifacts.
Here are the settings I have found most suitable for AMD cards:
You need to create file in the following path and restart Xorg or your computer to apply it:
*Beware that making a mistake here will possibly make your computer........
mysql reset root password.
Oops I can't remember my MySQL root password!
[root@centos7test etc]# mysql -u root -p
Enter password:
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)
First we need to stop mariadb:
systemctl stop mariadb
Now we need to restart it with skip-grant-tables whic........
yum -y install mariadb-server
systemctl start mariadb
mysql_secure_installation
Now we need to secure our install and set the MariaDB root password:
The lines you need to act on are marked in bold shown with the answer you need.
mysql_secure_installation
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
SER........
This problem has been around forever, Linux seems to think it is fine to use the r8169 driver for an r8168 NIC but this often causes problems including the link not working at all.
In my case ethttool shows the link up and detected but it simply does not work especially on a laptop that has been resumed from suspension. Sometimes it takes several minutes for it to work or to unplug and replug the ethernet.
Here is the solution:
Install th........
You need to disable vsync like this when running glxgears:
vblank_mode=0 glxgears
For Nvidia drivers do this:
__GL_SYNC_TO_VBLANK=0 glxgears
Notice the higher than 59-60 fps results with vblank_mode=0:
ATTENTION: default value of option vblank_mode overridden by environment.
7919 frames in 5.0 seconds = 1583.704 FPS
8187 frames in 5.0 seconds = 1637.266 FPS........
Downloading and compiling from source to get the latest version of Asterisk is really simple with this guide.
apt install gcc make g++ libedit-dev uuid-dev libjansson-dev apt install libxml2-dev sqlite3 libsqlite3-dev
wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-16-current.tar.gz
tar -zxvf asterisk-16-current.tar.gz
cd asterisk-16.6.2/
./configure
If you get this error change y........
Use fdisk on your USB drive to create a bootable NTFS partition (in my case /dev/sdb):
sudo fdisk /dev/sdb
Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)........
If you are using the default "Image Viewer" aka Xviewer it seems to die on very large resolution files. It seems to understand to scale them but the printer will try to print and then fail.
Using "Pix" viewer seems to fix this and causes these larger files to print just fine.
........
Most of us know the heredoc method but what if you need a basic query done repeatedly and manually while working from bash? It is a pain to manually type mysql and login each time.
With this command below you can semi-automate those queries:
echo "use somedb; select * from auctions" | mysql -u root --password="yourpassword"
Just modify the above to suit your needs and you can add more queries by adding a sem........
It is very silly but the default on the ifup-eth script tells dhclient ( the program that obtains a DHCP IPaddress if you have selected DHCPin your ifcfg-eth* config file) to EXIT / QUIT if the first attempt to obtain a lease fails.
No amount of dhclient.conf settings will fix this because if dhclient is started with -1 (which it is by default)then dhclient will quit.
This is obviously very bad for MOST cases. Say for example you have a power outage or........
Adjust to suit your needs. Currently this would kill any whois process running for more than 30 seconds or more than 1 minute.
Add it as a cronjob. The motivation is that some commands have no timeout and just end up using up CPU and memory for no reason while never exiting to free resources.
#!/bin/bash
IFS=$(echo -en "nb")
for pid in `ps aux|grep whois`; do
echo "pid=::$pid::&qu........
Just edit your tftp file for xinetd like this:
*Change the IPto be the IPof the interface you want to listen on.
To test if your tftp is available on a certain IP range use nc -u yourip 69 to see if you can still connect (/var/log/messages or /var/log/syslog) should show the connection if it is open.
Oct 13 23:20:34 01 xinetd[26631]: Started working: 1 available servic........
sudo pip3 install python-docx
[sudo] password for :
Downloading/unpacking python-docx
Downloading python-docx-0.8.10.tar.gz (5.5MB): 5.5MB downloaded
Running setup.py (path:/tmp/pip_build_root/python-docx/setup.py) egg_info for package python-docx
no previously-included directories found matching 'docs/.build'
warning: no previously-included files matching '.DS_Store' foun........
Video Links:
How To Setup 2 Phones on a Single CME Router and get the GUI going.
How to use Dialpeers with CME with two routers
How to implement call restrictions using COR / Class of Restriction
Set your clock:
HH:MM:SS
clock set 22:00:00 24 September 2024........
service sshd status
● ssh.service - OpenBSD Secure Shell server
Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enabled)
Active: failed (Result: start-limit-hit) since Wed 2019-10-02 11:07:54 EDT; 36s ago
Process: 476 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=255)
Oct 02 11:07:54 box systemd[1]: Failed to start OpenBSD Secure Shell server.
Oct 02 11:07:54 box sys........
By default at least on Centos 7 nfs only allows 8 connections and starts 8 nfsd daemons.
To fix this edit this file:/etc/sysconfig/nfs
Edit the line "RPCNFSDCOUNT" (uncomment it so it looks like this:
RPCNFSDCOUNT=30
In the example above we are setting 30 nfsd daemons to run (or in other words 30 connections are possible this way).........
Now older versions of qemu-kvm didn't throw this error say if you just had "-video cirrus" when starting qemu-kvm. But newer versions do care.
And this probably only applies to you if you are running from bash/terminal with remote kvm images.
What you need to do is remove the "-video" part and just add -vnc :5
eg. this would fix the error:
qemu-system-x86_64 -enable-kvm -boot order=cd,once=dc -m 1024 -drive........
I think this is more so an issue with kernel modules not being included. I had this issue on Linux Mint because a new kernel I upgraded to DIDNOT have the "extra" modules and part of that reason is also because older kernels are named differently than new ones.
Take this example article below that shows it in action.
If you were previously........
I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules.
One other weird thing is that sometimes........
cat .htaccess
RewriteEngine On
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule . index.php [L]
I keep reading there is a "# BEGIN WordPress" and a "# END WordPress" in the wordpress htaccess above but there is clearly not.
Even more strange is that my permissions are just 444 (read only).
so i changed it........
It is really simple using .htaccess with mod_rewrite.
Here is all you need:
RewriteCond %{SERVER_PORT} 80
RewriteRule ^(.*)$ https://site.com/$1 [R=301,L]
Another more graceful way is to use the %{SERVER_NAME}variable to make it dynamic. Just be careful that the server name will always match what you expect. (eg. if you are doing load balancing or clustering what if the server name may be somethi........
If you've just installed VBox and it is not starting or working, the most common problem is usually that you don't have your kernel source installed, which means there is no kernel driver for vbox so it can't work.
You may get an error that says "Kernel driver not installed" in your Virtualbox.
So the first thing you should do is install your kernel source by running this:
sudo apt-get install linux-headers-`uname -r`........
By default bind will not respond to outside queries for security reasons.
In most distributions you will find the default in /etc/named.conf looks like this at the top under options:
listen-on port 53 { 127.0.0.1; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";........
You'll have to edit the policy.xml file to fix this:
convert -density 300 output.pdf agreement.jpg
convert.im6: not authorized `output.pdf' @ error/constitute.c/ReadImage/454.
convert.im6: no images defined `agreement.jpg' @ error/convert.c/ConvertImageCommand/3044.
sudo vi /etc/ImageMagick*/policy.xml
Change
policy domain="coder" rights="no........
Use these flags:
convert -alpha flatten -alpha remove "output.pdf" ljll.jpg
And even the pesky black backgrounds should be gone after converting to jpg........
By default printscreen or alt print screen will get the whole desktop or the application in focus, respectively. But what if you want to select a portion of the screen?
gnome-screenshot:
ksnapshot
compiz
This is a nicely integrated solution
sudo apt-get install compizconfig-s........
SSH helps keep us secure in many ways, one of those is the host-key fingerprint which is unique. If you have been connecting to an SSH server that you've made no changes to and suddenly ssh warns that the key doesn't match then you have a problem.
But how about connecting to an existing server for the first time on a new machine or client?
A lot of new clients calculate it using an SHA256 hash but it is not as easy on your host machine to produce the sam........
This would be crucial especially if the phone is hardened, not being able to reset or change settings could prevent a phone registering in a new environment or even when migrating from office to office. This applies even if you are trying to migrate the phone to another platform such as Asterisk/FreePBX etc...
This guide applies to nearly all of the Cisco IP phones that you would use in CME or CUCM from several years ago including models: 9900, 9971, 8800, 8900, 8845, 8851, 8841........
Click "Administration" ->"Login Window"........
Opening Firefox from the CLI reveals the following as the cause of the error:
Query failed: Error: Error(s) encountered during statement execution: no such table: moz_favicons
The symptoms of this issue are that in the address bar you cannot hit enter to browse to a site/url/address and your history cannot be accessed, nor does your history show up in the address bar when typing previously used addresses.
This usually happens because you've........
Install Errors on Version 12:
This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5
on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error.
*Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install.
What really causes this even though you successfully install........
If you get error messages like this it is usually because /var/run/sshd does not exist.
root@userbox:/# service sshd status
● ssh.service - OpenBSD Secure Shell server
Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enab
Active: failed (Result: start-limit-hit) since Wed 2019-04-10 02:24:44 EDT; 1
Process: 511 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=255)........
I have seen this in a few rare cases after a reboot, where all folders and files will have the Read Only Attribute. If you uncheck it, it will just come back. It is more of a filesystem issue in Windows than a configuration issue and it looks like when Windows detects a badly corrupted filesystem that it will make things read-only, sort of like Linux would.
If you are Administrator or the owner of the folder and this is happening it is probably due to the reasoning mention........
The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs.
qemu-kvm command:
/usr/libexec/qemu-kvm -version
QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard
........
There are multiple layers but most are enabled by default such as the setting in the Phone Device Settings.
However the one not enabled by default is the one in "Enterprise Phone Configuration".
Enable "Cisco Camera" and then reboot your phones to enable it.........
Oops did you get this error trying to install an oldschool driver and think it is hopeless in a new version of Windows?
First of all it is almost never a program compatibility issue:
........
DN = Directory Number:
It is basically the extension of the phone
In the example below, 55 is a DN assigned to the phone.........
It is much more useful to have meaningful and detailed logging from tftp to see what is or isn't happening especially for VOIPand other embedded device appications:
Edit the file:
vi /etc/xinetd.d/tftp
Change the server line like this:
server_args = -s /var/lib/tftpboot........
Pass QEMU this flag:
-soundhw ac97
Or you could use (for a Ensoniq soundcard):
-soundhw es1370
However on some machines I get this error:
pulseaudio: pa_simple_new for capture failed
pulseaudio: Reason: Connection terminated
pulseaudio: pa_simple_new for capture failed
pulseaudio: Reason: Connection terminated
audio: Failed to create voice `ac9........
You may have noticed if you are running QEMU/KVMmanually that in Windows the the position of the physical mouse does not match where the mouse is positioned within Windows.
There is an easy command to pass to qemu-kvm or qemu-system (whatever you call your binary):
-usbdevice tablet
The above flag will fix your mouse pointing problems whether you are running Windows 95, 98, NT, XP 2000, 2003, Vista, 7, 8 10 or Server 2000, 2003, 2008, 2012, 2016 or 2........
Are you tired of coming back to your computer only to find your SSH connections have been broken? Even worse are the ones that hang where it appears to be connected but it is really not.
The one option you have is an SSHclient side modification to send KeepAlive packets, sometimes this can also keep up your WiFi connection and stop it from disconnecting you as well.
To make the keep alive changes for your just yourself (not system wide)........
This is the closest way to disabling it without using the "libata.force=noncq" kernel boot option is to set the queue to a depth of 1 which doesn't actually disable it.
Change the sdc below to match the device you want to disable NCQ for.
[root@officebox ~]# echo "1" > /sys/block/sdc/device/queue_depth
Errors that indicate you are having a performance issue are these in messages or dmesg relating to N........
If you visit a site that exploits the WebRTC vulnerability including whatismyipaddress.com it may show "Local IP Address" which would be the real IP of your machine.
The vulnerability works on Windows and Linux machines (contrary to false information on the web which claims it only affects Windows).
The above works and happens even if you are using a proxy or VPNaccount like ProVPNAccounts.com
It is easy........
chroot which stands for change root allows you to virtually operate in another operating system even though you haven't booted it. It is commonly used to deploy new distros, applications and to fix a broken Linux/Unix install or prep a new system image without having to physically boot the drive or disk.
So in this example let's say we have a drive that has a Linux OS installed on /dev/sdb1 and we have mounted this partition on /mnt/sdb1
The key point is to edit the &quo........
WARNING: Image format was not specified for '/mnt/space/cucm12.img' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
#you should manually specify the format
q........
This is a common issue that I haven't seen many answers for on the internet. When you are using Linux as your host machine and you are connecting to another Linux machine over VNC you CANNOT use Ctrl+Alt+F1 to change virtual consoles as it sends the keys to your actual local machine.
In many versions of Linux you can cycle through virtual terminals including over VNC using this:
Alt + Left Arrow or Alt + Right Arrow
This........
https://docs.microsoft.com/en-us/powershell/module/skype/?view=skype-ps
Troubleshooting Client Connectivity Issues
The first step is to enable full logging in the Skype Client itself and then check the log on the client side. In Windows this normally means going to the Skype client "settings" and then "Enable Full Logging".
Aft........
This is usually because of STP causing a delay in the negotiation.
Edit your ifcfg script eg:
/etc/sysconfig/network-scripts/ifcfg-eth0
Add a LINKDELAY of 30 seconds or whatever works for you:
LINKDELAY=30
After that you should have an IP during bootup.........
Perhaps you've just seen this in the bash prompt:
-bash-4.1#
Instead of the expected user@hostname#
It is probably because you are missing .bash_profile or .bashrc in your home directory
Check for yourself:
ls -al ~/|grep -E ".bash_profile|.bashrc"
-rw-r--r--. 1 root root&nbs........
This may sound silly but often on the same machine multiple versions of SQL may be installed due to other applications.
How do we know which one we are running and connected to?
Use the query:
select @@version
........
If you don't aleady have it, you'll need EPEL
Install LXC
yum -y install lxc lxc-templates
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: mirror.it.ubc.ca
* epel: mirrors.kernel.org
* extras: mirror.it.ubc.ca
* updates:........
Install Issues:
How to Make CUCM iso /modify to work on non-VMWare machines like QEMU/Xen/OpenStack
If you get kernel panic errors in VBOX usually disabling Nested Paging will fix the issue (thanks to Mark).
ks_pre.sh error is caused by having the wrong VDX pattern (change it do sd per guide link above) and/or the wrong VMSpecs (Cisco req........
So say you are behind a typical NAT/LAN setup whether at home, work or while travelling. What if you have a computer or server that you need to connect to from the outside?
Yes you could use a VPN but a quick and dirty, temporary and secure way is to use SSH's Reverse Tunneling Proxy feature.
Requirements
On the remote ssh server host you need the GatewayPorts option enabled in sshd_config (be........
For some reason, perhaps you don't want to run a daemon or let Letsencrypt have access to your production server.
There is a way to use it like a normal CSR/CA setup in manual mode.
./letsencrypt-auto certonly --manual -d realtechtalk.com - www.realtechtalk.com
Eventually you will get prompted to create a certain path and file with certain data:
Create a file containing just this data:
Casdfasfadsfsad........
In most of the Cisco router IOS I find the ports like ge0/0 ge0/1 and ge0/2 or whatever your ports are down. They will not even give you a link light. So one of the first tasks should be getting the port you are working with up.
In my case the first goal is often connectivity with the LAN and WAN.
LAN = your local area network (eg. in the office/home )
WAN= your ISP/public internet (eg. fiber/cable/dsl/ethernet).........
Switch#show ip dhcp snooping
Switch DHCP snooping is disabled
DHCP snooping is configured on following VLANs:
1
Insertion of option 82 is enabled
circuit-id format: vlan-mod-port
remote-id format: MAC
Option 82 on untrusted port is not allowed
Verification of hwaddr field is enabled
Interface&nb........
Enter configuration console:
enable
configure terminal
This is important because if your console doesn't look like below none of the commands will work!
Switch(config)#
Save and Apply Settings
wr
Show Switch Configuration:
show run
Show Port List/Sta........
This works on the 2000 and 3000 series generally.
*The easy way is to just hold the mode button for 10+ seconds.
The full/proper way is below:
1.) Either power on the unit and hold the "mode" button or hold the "mode" button until you see the below:
00:04:08: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram
00:04:08: %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configur........
The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported.
Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........
What you need to do if you have taken a dd or real raw image dump of a hard disk:
VBoxManage convertdd windows2019-eval-template.img windows2019.vdi --format VDI
The .img is the raw dd dump and the .vdi is the output file.
--format VDIspecifies to output to .vdi format
If you are in a pinch you can always use qemu-kvm binary and manually specify the .img as your disk and i........
It was broken because of this package for xorg I installed:
xserver-xorg-core-hwe-18.04
Just remove it even if you have to chroot from a live USB/CD:
sudo apt-get remove xserver-xorg-core-hwe-18.04........
The key thing here is to know the actual partition that is encrypted.
Often in Linux Mint's installer that ends up being partition 5 or /dev/sda5
sudo cryptsetup luksOpen /dev/sda5 anynamehere
You will then be prompted for your irrecoverable passphrase:
Enter passphrase for /dev/sda5:
If all goes well it won't say anything further. If it says ""No key available with this passphr........
This is not about systemd/systemctl and not about "onboot" so there's no rc.local trick here but it's the GUI/Gnome etc when a user logs in that a command is launched.
Put this in your home dir
The .config/autostart directory is where Linux Mint/Ubuntu checks for autostart application config files
mkdir -p ~/.config/autostart
Create a new entry/file that starts an application........
For most of these machines you just have to power the unit on while holding the "Del" key and you'll enter the BIOS.........
If you see this in /etc/sudoers it is NOT a comment but an include.
#includedir /etc/sudoers.d
For example in Linux mint sudoers.d contains the following files:
casper mintupdate README
casper for example contains the following sudoers line:
mint ALL=(ALL) NOPASSWD: ALL
So if you are messing ar........
./certbot-auto --apache certonly
Saving debug log to /var/log/letsencrypt/letsencrypt.log
Plugins selected: Authenticator apache, Installer apache
No names were found in your configuration files. Please enter in your domain
name(s) (comma and/or space separated) (Enter 'c' to cancel): yourdomain.com
Obtaining a new certificate
Performing the following challenges:
http-01 challenge for yourdomain.com
Cleaning........
debug1: Local connections to LOCALHOST:18006 forwarded to remote address 192.168.1.93:8006
debug1: Local forwarding listening on 127.0.0.1 port 18006.
debug1: channel 0: new [port listener]
debug1: Local forwarding listening on ::1 port 18006.
bind: Cannot assign requested address
What we are seeing is that we can't listen on an IPV6 address of ::1. We need to tell SSH to stop using IPV6 so we'll edit ssh_config to take care of this issue........
The defaults in Windows 2016 server leave clients crippled so they can't even download basic files or software. But Group Policy Management Editor comes to our rescue!
Use cmd or Powershell and run:
gpme.msc
Choose your domain/computer and then navigate like below and create a new menu entry for IE11 or whatever your version is. Don't be worried if the highest version is IE10 it means that it applies to IE10 AND above.........
By default VMWare Workstation often doesn't work as we would like.
If you create a VM with a default NAT IP it won't work you will find the NIC is disconnected (even though on the VMWare side it says connected including at Power On).
How To Solve It
1.) Create New VMNet for NAT
Click "Edit" -> "Virtual Network Editor"
Click "Add Network"
Select Network To Add "VMNet1" (........
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md127 : active (auto-read-only) raid10 sdc1[0] sdb1[2]
1953382400 blocks super 1.2 512K chunks 2 far-copies [2/1] [U_]
resync=PENDING
bitmap: 15/15 pages [60KB], 65536KB chunk
Solution force repai........
In Debian a lot of times SSH disables the root user to login by password by default. This means you will get an authentication failure as if you typed in the wrong password.
The logs also indicate the password is wrong but what is often the case is in the config file
Check /etc/ssh/sshd_config
cat /etc/ssh/sshd_config|grep -i permitrootlogin
Make sure it says:
PermitRootLogin yes
If not change it and restart SSH........
When using strip_tags and html_entity_decode with PHPit often breaks and produces annoying diamonds with question marks.
It is probably because of characters like these:
… (looks like 3 dots but it is a single weird character).
’ (looks like a normal apostraphe but it is not)
” (looks like a normal double quote but it is not).
An easy way to sort this out is to copy the above and search in an ASCII table to extend the functional........
This should apply to most Linux distributions just incase you get into trouble or wipe out the defaults by accident.
/etc/iproute2/rt_tables
#
# reserved values
#
255 local
254 main
253 default
0 unspec
#
# local
#
#1 inr.ruhep........
Below are the common errors you'll get with named AKA bind if your time is incorrect.
The simplest solution is to install and run ntpd to correct your system's time (install ntpd if it is not installed)
systemctl start ntpd
systemctl enable ntpd
Dec 20 13:36:16 hostingbox named[2169]: error (no valid DS) resolving 'develop.waxrain.com/A/IN': 14.215.150.17#53........
Just find the relevant file in /etc/NetworkManager/system-connections
sudo vi /etc/NetworkManager/system-connections/Wired connection 1
[802-3-ethernet]
duplex=full
mac-address=00:00:00:FE:FE:FE
[connection]
id=Wired connection 1
type=802-3-ethernet
timestamp=1532403341
[ipv6]
method=ignore
[ipv4]
method=manual........
growisofs -Z /dev/sr0 critical.tar.gz.gpg
Executing 'genisoimage critical.tar.gz.gpg | builtin_dd of=/dev/sr0 obs=32k seek=0'
I: -input-charset not specified, using utf-8 (detected in locale settings)
File critical.tar.gz.gpg is larger than 4GiB-1.
-allow-limited-size was not specified. There is no way do represent this file size. Aborting.
:-( write failed: Input/output error
#remember to us........
On a test machine Iwas never able to access to a newly created 4th partiton. As we can see there are dev devices for everything but the 4th partition.
The normal "partprobe" or "kpartx" or kernel being told to rescan the block device didn't help (only a reboot did).
fdisk -l /dev/sda
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units........
In a RAID array I had a have periodically lost a drive here and there over the past several months. Iwas always able to readd and resync without losing data. However at some point it looks like some minor corruption happened and this makes DRBD unhappy.
Using fsck did not help either.
Dec 19 06:01:45 storageboxtest4 kernel: [19005.945890] EXT3-fs error (device drbd0): ext3_get_inode_loc: unable to read inode block - inode=22184379........
mdadm --manage /dev/md125 -a /dev/sdb4
mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument
Dec 19 01:23:48 storageboxtest kernel: [ 2328.854491] md: sdb4 does not have a valid v1.2 superblock, not importing!
Dec 19 01:23:48 storageboxtest kernel: [ 2328.854499] md: md_import_device returned -22
#zero the superblock and try again!
mdadm --zero-superblock /dev/sdb4
mdadm --ma........
Do you hate it when your ISPhas old cached records because of a high TTLon the DNS record of the relevant domain? In plain English this means you often can't connect to a site or service because your ISP's DNS servers haven't gotten word of the new IP address (probably because they haven't checked). There are also some that are notorious for ignoring TTL and not updating records for days!
But if you are lucky and smart enough to have your own Linux based DNS se........
The reason for not being able to read one of these dreaded/ fillable "XFA" forms is because no Linux PDF reader that I'm aware of supports them. Part of this reasoning is for security. It is really silly, they should ban these XFA forms or at least replace the Please Wait with the non-fillable version.
Download Adobe Reader 9.5 for Linux from here:
This is the solution but only so much, at least for me I was able to view th........
Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated.
It has caused a kernel panic and system crash repeatedly as we can see from the logs.
But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector.
Any time I have had anything but 0 for that attribute it........
initiator = client
target = server
These are the first concepts you should understand which is that in iscsi essentially the "initiator" is the client and the "target" is the server.
iSCSI is derived from the old fashioned SCSI that us oldtimers grew to love. The "i" stands for Internet and the SCSI stands for "Small Computers Systems Interface" (SCSI).
iSCSI Target (Server)Setup
targetcli is the pac........
httpd
AH00534: httpd: Configuration error: No MPM loaded.
Simple Solution (assuming you don't have this line in httpd.conf aleady:
echo "Include conf.modules.d/*.conf" >> /etc/httpd/conf/httpd.conf
........
function centos7 {
release=`cat /etc/redhat-release|awk '{print $4}'|grep ^[7]`
if [ "$release" != "" ]; then
centos7='yes'
fi
}
centos7
echo "$centos7"
We create a function called "centos7" and then call it by just typing "centos7"
We then access a variable that may be set........
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/pdo_mysql.so' - /usr/lib64/php/modules/pdo_mysql.so: symbol mysql_options, version libmysqlclient_18 not defined in file libmysqlclient.so.18 with link time reference in Unknown on line 0
#not sure what is wrong with php-mysql but I removed it and installed mysqlnd
yum -y remove php-mysql
yum -y install php-mysqlnd........
Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments.
Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........
What Is Active Directory?
Active Directory is essentially an enhanced, centralized database with a set of objects that make user management, authorization, and data management simpler. Active Directory is synonymous with "Domain Controllers" where a single "domain" often consists of multiple sites and members of the domain. Multiple domains can also be joined to belong to a tree ( a collection of domains). And the highest layer is the forest whi........
This happened in a PHPscript with heredoc but it could really happen anywhere. The issue was whitespace in code like this:
$variable = ........
mytop is one of my favorite tools and it is fairly simple aside from a few caveats and issues that persist to this day.
To install it on Centos:
yum -y install centos
Configure ~/.mytop
vi ~/.mytop
user=root
host=localhost
db=test
#port=3306
socket=/var/lib/mysql/mysql.sock
header=1
color=1
Try runni........
When converting binary the easiest way is to write out a vertical list in a format like below and follow the formula in the table.
Example Convert 1101 1111 to decimal.
Step 1.)
Write out the binary below in vertical form (leave lots of space on the left side).
Keep this in mind that the "previous sum" starts at 0 on your first line.
Step 2.)
Formula:
2 *........
systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system.
The key commands or arguments you will use with systemctl are the following:
Unit Commands:
list-units [PATTERN...] List loaded units
&nbs........
umask are the default permissions that are applied when a file or directory are created. To see this in action simply just "touch filename" or "mkdir somedir" and you'll see what default permissions are applied.
The first thing Ialways tell people you should know is to NEVER change the defaults unless you are making them more restrictive. But they work well and if you change the defaults you could end up creating a file without permission to read........
Ihave a directory structure which the primary user needs full access on but wanted a user to access only a specific directory within the main directory (so they could write in there only and nowhere else).
Here's what Idid:
[root@compevo8001 dllnow]# ls -alh
drwxrwxr-x 2 someuser software 4.0K Oct 19 2017 ExpireYMD-2017-11-20
drwxrwxr-x 2 someuser software 4.0K Nov 19 2017 ExpireYMD-20........
You'll have to violate the iso9660 standards but it is necessary if you want to preserve your filesystem and filenames and shouldn't be an issue as long as you are using a modern OS like Linux.
genisoimage -o Backup-Myfiles.iso -r -J -joliet-long /some/path/
You will get errors like below (even enabling joliet-long didn't help)
genisoimage: Error: /some/filename.pdf have the same Joliet name
Joliet tree sort failed. The -joliet-lo........
#Linux Mint 18.2 how to install gajim .16.9 so you can use OMEMO encryption:
sudo apt-get install python-axolotl python-nbxmpp
wget https://gajim.org/downloads/0.16/gajim-0.16.9.tar.gz
tar -zxvf gajim-0.16.9.tar.gz
cd gajim-0.16.9
./autogen.sh ;make;sudo make install
#if you get this error you need to get a newer python-nbxmpp from here:
gajim
Gajim needs python-nbxmpp >= 0.6.1 to run. Quiting...........
wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe
--2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe
Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85
Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1525561 (1.5........
sudo apt-get install hwloc-nox
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
hwloc-nox
0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded.
Need to get 151 kB of archives.
After this operation, 453 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubunt........
An error occurred during a connection to some-ip-or-domain. SSL peer reports incorrect Message Authentication Code. Error code: SSL_ERROR_BAD_MAC_ALERT
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
**Solution**
Go to about:config........
Error 0 occurred while receiving the document
root@vh1:/var/tmp# wget http://mirror.compevo.com/proxmox/proxmox-ve_5.2-1.iso
--2018-08-30 16:27:37-- http://mirror.compevo.com/proxmox/proxmox-ve_5.2-1.iso
Resolving mirror.compevo.com (mirror.compevo.com)... 103.25.61.44
Connecting to mirror.compevo.com (mirror.compevo.com)|103.25.61.44|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 641517568 (612M) [application/o........
After starting the install it stalls here:
admin/index.php?cache=0&agreelicense=1&confirmrelease=1&lang=en
If you manually refresh you get a Plugins check screen:
Installation
System
Moodle second step fails just blank screen:
https://domain.la/user/editadvanced.php?id=2
Solution: give up and choose something else it shouldn't be thi........
Your database uses Antelope as the file format. Full UTF-8 support in MySQL and MariaDB requires the Barracuda file format. Please switch to the Barracuda file format. See the documentation MySQL full unicode support for details.
In /etc/my.cnf under [mysqld]
180827 21:43:14 InnoDB: 5.5.59 started; log sequence number 1589339
180827 21:43:14 [ERROR] /usr/libexec/mysqld: unknown variable 'db_file_format=Ba........
[root@localhost:~] vmkping -I vmk1 10.0.2.69
PING 10.0.2.69 (10.0.2.69): 56 data bytes
sendto() failed (Host is down)
vsphere distributed switch vmotion not working
[root@localhost:~] esxcfg-route -l
VMkernel Routes:
Network Netmask Gateway Interface&........
You get errors like below and see you have all question marks for the permissions if you go to /run/user/1000/gvfs
If you try to access the mounted share such as anything mounted as gvfs like an SSH share in your file manager you may get an error like this. It generally means an interruption in communication or a fault with gvfsd has caused it.
Solutio........
How to check if nested KVM is enabled by doing a cat on nested inside sys
Nested KVM is mainly important for testing for example if you wanted to install VMWare or Proxmox Nodes in a virtual environment for testing. Without nesting, the performance will be extremely slow, since the VMs within the nodes will not be using Virtualization extensions.
I've used wildcard on kvm_ because it could be kvm_intel or kvm_amd depending on whether y........
This is not so much of a vi error as it is a physical filesystem error in the sense that the file you are trying to write to is a symlink and the destination doesn't exist or for some other reason is inacessible.
So vi is tellng you "you're writing to a symlinked file and the file the symlink points to cannot be written to". This is especially highlighted byt he fact that if you are using wq! to write and you still get the error.........
It could just be my specific Java but other KVM/IP works ok on my machine but with Supermicro's IPMI for some reason the console window doesn't resize and even putting it in full screen leaves the window cut off as shown below:
As you can see above the screen is cut off you can't see the "Iagree" on the right side.
The window resi........
Usually this is because when you created your user you added a user but didn't create their home directory and/or for some reason your .bashrc and .bash_profile in ~ (home) is broken/missing.
In your home just create the following files with the following content to solve it:
.bashrc and .bash_profile.
To apply it just relogin/start a new bash session
# .bash_profile
# Get the aliases and funct........
zenity is a nice utility as part of the gnome window manager that allows you to script from bash and retrieve the input from the user. It could also be helpful in just notifying a user when they login with a popup window.
I'll give an overview of what's available with zenity:
Application Options:
--calendar Display calendar dialog
--entry Display tex........
You can find many ways to specify the VLANin your network configuration but Ifind this is the simplest and quickest.
In this case we are talking about a bridged adapter "vmbr0" but it works even if you just had a normal non-bridged interface.
The key here is that in vmbr0 you'll notice there is no IP address. We just specify "manual".
Below it is a similar stanza for "vmbr0.58" in this case 58 represents the VLAN (change........
Error reading from database
More information about this error
It is usually not possible to recover from errors triggered during installation, you may need to create a new database or use a different database prefix if you want to retry the installation.
Solution:
This happened when I was running MySQL 5.1. Assuming your database details are right and the DB is up then make sure you are usin........
Almost always the reason will be that the php.so file is missing but also that php.conf is misconfigured.
In the problem machine it is actually PHP7 installed so if you reference PHP5 of course things wil be broken!
Take for example here:
cat /etc/httpd/conf.d/php.conf
#
# PHP is an HTML-embedded scripting language which attempts to make it
# easy for developers to write dynamica........
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0
Solution:
Edit geoip.ini
vi /etc/php.d/geoip.ini
Comment out the .so like so:
;extension=geoip.so
service httpd restart........
[root@localhost:~]
BootModuleConfig.sh echo host-ind nfcd........
yes it does create its own json
============================================
cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json
2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1
--> ........
The solution is just to install libmicrohttpd-dev
./xmr-stak
./xmr-stak: error while loading shared libraries: libmicrohttpd.so.10: cannot open shared object file: No such file or directory
libmicrohttpd
libmicrohttpd10 - library embedding HTTP server functionality
libmicrohttpd-dbg - library embedding HTTP server functionality (debug)
libmicrohttpd-dev - library embedding HTTP server functionality (development)
$ sudo apt-get i........
There is no such option as "VBS" that Ican see in vSphere 6.7 Ibelieve this is actually an issue because of using old hardware in this case L5420 doesn't support Nested Virtualization I believe.
Hardware virtualization is selected and cannot be deselected due to selection of VBS
Insufficient resources to satisfy configured failover level for vSphere HA.........
sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3
sudo apt-get install libcurl4-gnutls-dev
git clone https://github.com/wolf9466/cpuminer-multi
sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev
git clone https://github.com/fireice-uk/xmr-stak-cpu.git
make install
cd bin
chmod +x xmr-stak-cpu
./xmr-stak -O xmr........
checking whether autoconf works... ../configure: line 5377: 7325 Segmentation fault $AUTOCONF $ACFLAGS configure.in > /dev/null 2>&1
no
configure: error:
*** These critical programs are missing or too old: gawk
*** Check the INSTALL file for required versions.
........
top - 13:02:52 up 603 days, 19:19, 2 users, load average: 5.01, 4.15, 3.44
Tasks: 604 total, 5 running, 599 sleeping, 0 stopped, 0 zombie
Cpu(s): 17.7%us, 36.1%sy, 0.0%ni, 42.0%id, 4.1%wa, 0.0%hi, 0.2%si, 0.0%st
Mem: 16278908k total, 4269684k used, 12009224k free, 119672k buffers
Swap: 8k total, ........
Just Press F9.
F11 gets you the boot Menu.........
Server Side Config
1.) First install nfs-utils
yum -y install nfs-utils
2.) Configure nfs share
Create a directory for your NFS share
mkdir /datastore
Create your NFS share in /etc/exports
echo "/datastore 10.220.101.0/24(rw,sync,no_root_squash)" >> /etc/exports
systemctl restart nfs........
dvd+rw-mediainfo /dev/sr0
INQUIRY: [ASUS ][BW-16D1HT ][3.00]
GET [CURRENT] CONFIGURATION:
Mounted Media: 11h, DVD-R Sequential
Media ID: RITEKF1&n........
Ialready have the caja-image-converter option installed but it shows nothing.
Weirdly enough if you install nemo and nautilus converter it does show and work inside caja:
The solution is to install *-image-converter
sudo apt-get install *-image-converter
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'n........
We all know Linux is known for good memory management but is it really? It seems all on its own with hardly anything running that you can come back in days or weeks and find that almost all of your RAMis used!
And many will say "no don't worry it's buffers for optimization" but it doesn't seem to help because what is in buffers is not available to use for new programs running or ones that allocate more RAM as far as Ican tell.
The reason Iknow........
You can search for this bug and it seems like it may be related to ecryptfs and is many years old.
The symptoms are that you return to the computer and the screensaver was active or the screen was asleep/black and it doesn't seem to come back. But you check by SSH the computer is running fine and are frustrated you'll lose your running programs and have to reboot.
There is a simple solution:
Ctrl + Alt + F1
Ctrl +Alt + F8
Ba........
I can't get vmx cpu extensions to show up in Virtualbox guests despite enabling nested paging and
enable vmx in virtualbox guest but this doesn't help that you check VT-X or the AMD Virtualization SVM it enables it for the guest to use BUT does not pass it through. This means if you check cat /proc/cpuinfo in the guest you will see the CPUdoesn't support virtualization. It looks like VirtualBox still hasn't implemented this!
But there is good news I&n........
InternalServerError (com.vmware.vapi.std.errors.internal_server_error) => {
messages = [LocalizableMessage (com.vmware.vapi.std.localizable_message) => {
id = vapi.bindings.method.impl.unexpected,
defaultMessage = Provider method implementation threw unexpected exception: com.vmware.vapi.std.errors.InternalServerError,
args = [com.vmware.vapi.std.errors.InternalServerError]
}],
data =
}
I was getting the........
Intel VT-X is enabled in Virtualbox but it doesn't seem to pass through the needed vmx extension despite the following variables on the host confirming it is enabled:
cat /sys/module/kvm_intel/parameters/nested
Y
cat /sys/module/kvm_intel/parameters/ept
Y
OVF Tool: Disk progress: 99%
OVF Tool: Transfer Completed
OVF Tool: Powering on VM: Embedded-vCenter-Server-Appliance-
OVF Tool: Task p........
I had this error in an unsupported CPUon VMWare 6.7 and apparently this sometimes works especially on older VMWare versions like 6.5 5.5 etc (but in my case it did not).
To make sure it proceed when you see "Loading VMWare"
Hit "Shift+O"
Then add "ignoreHeadless=TRUE"
See an example below:........
#mount the VCSA DVD
mount /dev/sr0 /mnt/cd
#alternatively you could mount the iso directly
mount -o loop vcsa.iso /your/mount/path
#for this purpose we are using the CLI installer on Linux
cd /mnt/cd/vcsa-cli-installer/lin64
#no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file
./vcsa-deploy
Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
10/07/2018 03:05:14 PM [IPv4] Got connection from client10.10.25.1
10/07/2018 03:05:14 PM other clients:
10/07/2018 03:05:14 PM Client Protocol Version 3.7
10/07/2018 03:05:14 PM Advertising security type 18
10/07/2018 03:05:14 PM Client returned security type 18
10/07/2018 03:05:14 PM TLS Handshake failed: Could not negotiate a supported cipher suite.
10/07/2018 03:05:14 PM Client10.10.25.1 gone
10/07/2018 03:05:14 PM Statistics:........
Starting with newer versions of OpenVPN Ibelieve 2.2+ you need to have "script-security 3" set or you can't execute a third party script.
Prior to that you could also use the auth-user-pass-verify like this:
auth-user-pass-verify ./validate.pl "$username $password $ip" via-env
Options error: the --auth-user-pass-verify directive should have at most 2 parameters. To pass a list of arguments as one of the paramete........
This basically means that you are running as non-root and you need to be root to create the tun0 or tap0 device on OpenVPN. You could try sudo or adding the openvpn binary to the list of sudoers.........
First of all download the raw .so file from zend:
Copy the one relevant to your PHPversion to /usr/lib64/php/modules/
eg.:cp ioncube_loader_lin_5.3.so /usr/lib64/php/modules/
Then in your /etc/php.d/ directory create the file:
vi /etc/php.d/zend.ini
zend_extension = /usr/lib64/php/modules/ioncube_loader_lin_5.3.so
After that restart apache/httpd and you'll be good to go!........
The main issue is it looks like Java is not configured to accept the invalid ssl cert that is coming from the download location.
Exception in thread "main" java.lang.RuntimeException: javax.net.ssl.SSLException: java.security.ProviderException: java.security.InvalidKeyException: EC parameters error
export ANDROID_HOME=/home/user/Downloads/tools/
Conversations-master$ ./gradlew
Downloading https://services.gradle.org/distributions/grad........
This is most likely to happen on a normal GUI system like Ubuntu or Linux Mint. If you or the user is meant to have sudo / root privileges it is as simple as editing the following files:
Now assume your username is "iamtheuser"
vi /etc/group
adm:x:4:syslog,iamtheuser
sudo:x:27:anotheruser,iamtheuser
Find the above lines and add a comma and "ia........
Database Error
One or more of the WHMCS database tables appear to be either missing or corrupted. Please check and repair.
This error can be misleading especially if you know you are using a known good backup or restoration of the WHMCS database. The error can also be that the user lacks permissions to read and write to the database.
To check to this in MySQL shell:
GRANT read,write to dbusername@localhost on dbna........
Jul 3 22:12:17mailserver postfix/smtpd[6195]: fatal: no SASL authentication mechanisms
Jul 3 22:12:18mailserver postfix/master[4881]: warning: process /usr/libexec/postfix/smtpd pid 6195 exit status 1
Jul 3 22:12:18mailserver postfix/master[4881]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling
This only ever happens in my experience when the authentication method is actually Dovecot. Usually the problem........
Centos when copying old files and restarting it seems load everything fine and then says [FAILED] with no log or other message.
service restart named
named [FAILED]
Check more thoroughly you may have missed the error if you have lots of zones!
service named restart|grep error
zone 1.168.192.in-addr.arpa/IN: not loaded due to errors.
zone 2.168.192.in-addr.arpa/IN: no........
Sometimes if you have a very basic configuration OpenVPN on the client side for some reason sends all traffic to the OpenVPN server IP through the tun0 which is of course impossible and creates a block or routing loop.
This is because you need to use your normal ISP/LANgateway to hit the OpenVPN server if it is remote/offsite as is usually the case. So if you are connected to the OpenVPN through say a tun0 device and your routing is set to connect to the OpenVPN&nbs........
This happens because Dovecot limits the maximum IMAPconnections per IPto just 10. This may be fine for a single client side IPbut if an entire office or multiple users are behind one IPor a single heavy user is active then you will get bizarre errors in your e-mail clients such as "Password Incorrect" or similar in Thunderbird. It won't be obvious on the client side as to what the problem is and they will probably just think the server is misconfi........
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.2.15 (CentOS) Server at testdomain.com Port 80........
This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help.
Here is the short end of the stick that fixed it:
sudo apt-get install mdm mate-desktop-environment
Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........
This usually happens when you are using something like an INT and try to insert a larger valuethan the maximum which is larger than "2147483647"
On a practical term I have seen this and been guilty of this error when using scripts like PHPand generating large random numbers:
$hash = mt_rand(5,9999999999999);
Obviously that many 9's are more digits than the maximum of an INT resulting in that error. Change your code accord........
Here is the only solution Ifound that works in Firefox:
*Note you could basically just copy all of the commands in bold (the rest just shows the output)
Install sqlite3
sqlite3 places.sqlite
sqlite> .clone places.sqlite-fixed
moz_places... done
moz_historyvisits... done
moz_inputhistory..........
sign_and_send_pubkey: signing failed: agent refused operation
This happens when you don't manually add your ssh key with ssh-add it is some weird new feature in SSH or Ubuntu/Debian that causes this weird problem.
Solution:
ssh-add
Identity added: /home/user/.ssh/id_rsa (/home/user/.ssh/id_rsa)........
It looks like this has something to do with APIC but I am not sure. I have similar CPUs with a different MB and BIOS that work fine on the same type of kernel. A lot of time the issue is because of the C-step setting in the BIOS.
The same thing happened on the 2.6 kernel with Centos 6 but this is a homebrew 4.4 kernel soI am not sure why it is happening when even Centos 7 (3.2) kernel works OK.
Solution - It comes down to the BIOS set........
So you restarted your router/dhcpd server or for some other reason you wonder why DHCP is not working on any of your clients?You go and check that named is in fact running fine.
But then you check /var/log/messages and see this error for everything hostname:
named[1525]: error (broken trust chain) resolving 'min-api.cryptocompare.com/A/IN': 173.245.58.78#53
I've only ever seen this when the time on the server was off. It........
In xplayer Iget the following error "Could not initialize supporting library.". It actually looks more like a gstreamer issue.
For those wondering what the default video player is called it is "xvid" and not "totem" anymore like previous versions.
Basically it looks like some codecs are missing when I uninstalled another program it uninstalled other programs and codecs that it shouldn't have.
I've tried installing all the gstre........
It is well known hackers, the NSA, CIA and other groups have created malware to secretly turn on your webcam and microphone on your phone, tv etc.. But fortunately on our computers and laptops we have some options.
Most webcams use the "uvcvideo" kernel module / driver. You can disable this in two ways on boot. I recommend both just as a failsafe.
Disable it on rc.local once your system boots automatically
Add the followi........
One simple way to keep your server public but almost impossible to hack via SSHis to disable password authentication over SSH. This means the only way in is via your own private key that only you should have.
Edit your /etc/ssh/sshd.conf file
Set this option
PasswordAuthentication no
Restart your SSH server.
service sshd restart
........
This is one thing that has me wondering about SMF. It is apparently a known issue but in the latest version and new install nothing looked right because it was using http://127.0.0.1 to find everything! How on earth would it ever do this or think it is normal?
Excerpt of crazy html code it produces that causes the issue:
........
GRANT SELECT, LOCK TABLES ON *.* TO yourmysqluser@localhost;
All you need to do a full MySQL dump on all databases is the SELECT and LOCK TABLES privileges. This way you don't have to use the mysql root user. Data could be compromised this way but at least no harm from manipulation, changes or deletion are possible by locking down the privileges to the minimum for a full MySQL dump and backup.........
It's fairly simple to start or stop a check but I do wish mdadm's command had this built in. Sometimes it will do a check at the worst time causing the server to crawl to a halt.
Stop check on md126:
echo idle > /sys/block/md126/md/sync_action
Start check on md126:
echo check > /sys/block/md126/md/sync_action
........
So I have a domain "testdomain.com".
Inside test domain.com's root is the following .htaccess:
Options +FollowSymLinks -Indexes
ErrorDocument 403 /launch/index.html
Order Deny,Allow
Deny From All
Allow From 192.168.1.2
When you visit anything other than root things work fine. Eg. if you visit http://testdomain.com/somedirfile.html
It will show the right error in /launch/........
Just type the command:
localboot
By default it will boot the first local drive "0". Ibelieve you can specify a different number to boot a different device.
eg.
localboot 3
(will boot the 4th BIOS device)'........
error: Could not locate RPC credentials. No authentication cookie could be found, and no rpcpassword is set in the configuration file
This is usually because the .cookie file cannot be read by the user you are running Litecoin or Bitcoin client/daemon as.
You can adjust the permissions of the file so that the user or group they are apart of has read permissions.
........
Error: Unable to apply new quota values: quota not running
Container start failed (try to check kernel messages, e.g. "dmesg | tail")
Killing container ...
Container was stopped
Error: Unable to apply new quota values: quota not running
Can't umount /vz/private/123123: Invalid argument
[root@rtt 123123]# vzquota on 123123
vzquota : (error) Can't open quota file for id 123123, maybe you need to reinit........
The easiest way is to use SSHand DD or a combination of netcat. SSHwill be a little slower due to encryption but is the most secure way (on two older systems the average clone speed is about 40-50MB/s). This is also OS independent as it doesn't matter what the source OS is because you are literallly cloning the drive so you retain the partition table and settings.
Clone HDD using SSH and DD........
I don't recall having this issue in the distant past but nowadays at least Debian seems to be very picky about this.
I used dd to copy one hard drive to another and tried booting it. Everything seemed fine with grub working but each time it would drop to the busybox shell. There is no particular error so this is misleading.
Normally the first things you would check are to make sure your fstab is correct (that the UUID is correct)and that you've updated grub.&........
ssh rtt@192.168.1.199
Unable to negotiate with 192.168.1.99 port 22: no matching host key type found. Their offer: ssh-dss
It looks like the DSS option is not considered secure so when connecting from newer Linux systems to an older one you will get the above error.
It can be fixed (but you should consider upgrading your SSH daemon):
ssh -oHostKeyAlgorithms=+ssh-dss rtt@192.168.1.199........
This happened on Centos for no apparent reason with no obvious issue in the logs. Data could be read fine but not written (possibly due to some corruption or out of memory issue in the OpenVZ container is the best guess).
All mysql update and insert queries failed freezing without any error log on any database and table.
Tried to restart:
service mysqld restart
Timeout error occurred trying to stop MySQL........
MySQL will silently truncate a larger INT than capable.
Check MySQL's own documentation here:
As we can see the maximum size of INT (which is the most commonly used) is 2147483647
A lot of coders make this mistake by using very large values such as 9999999999 but it would actually truncate to 2147483647 which is the maximum size of an INT. This is dangerous beca........
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0
Remove the GEOIP from PHP:
php71w-pecl-geoip-1.1.1-1.w6.x86_64
PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the........
The Linux Kernel interpretated a very high volume of real traffic as a DDOS attack so it basically ends up blocking your web server.
possible SYN flooding on ctid 42131, port 80. Sending cookies.
Simple fix edit sysctl values for max_syn_backlog
sysctl -w net.ipv4.tcp_max_syn_backlog=5000
To make them permanent edit /etc/sysctl.conf
echo "net.ipv4.tcp_........
yum -y install samba
vi /etc/samba/smb.conf
https://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-6.03.zip
mkdir syslinux;cd syslinux;unzip syslinux-6.03.zip
mkdir -p /tftpboot/libs/
cp bios/com32/modules/linux.c32 /tftpboot/libs/
cp bios/com32/libutil/libutil.c32 /tftpboot/libs/
cp bios/com32/lib/libcom32.c32 /tftpboot/libs/
#add lib path
echo "PATH libs" >> /tftpboot/pxeli........
tftp: client does not accept options
I spent the good portion of a late evening on this double checking settings that I know always worked right for tftp!
This error can also happen if you are trying to boot PXE in UEFImode. Enter your BIOS and change it to "Legacy PXE" or non-UEFI PXE mode and you'll be good to go!........
First of all I got this error after accidentally messing up my usergroup by using usermod -G user group
When I would login using SSHkeys it would fail:
sshd[2020]: Authentication refused: bad ownership or modes for directory /home/one
No worries, the fix is simple!
chmod g-w /home/use........
pcimodules no longer works it produces nothing probably because the format of /sys/bus/pci is different.
lspci -k doesn't work on older lspci versions.
pciutils can be compiled but it won't work if you have an old system and compile on a newer glibc.
iteriate through /sys/bus/pci/devices/*/modalias
cat /sys/bus/pci/devices/*/modalias
pci:v00008086d00001237sv00000000sd00000000bc06sc00i00
pci:v00008086d00007000sv0000000........
edit theme css:
Click "Appearance -> Editor -> Stylesheet"
http://yourblog.com/wp-admin/theme-editor.php?file=style.css&theme=twentysixteen
textarea {
color: #1a1a1a;
/*font-family: Merriweather, Georgia, serif;*/
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif........
guestmount -a kvmuserscra.img -m /dev/sda1 mount
libguestfs: error: mount_options: /dev/sda1 on / (options: ''): mount: unknown filesystem type 'ntfs'
guestmount: '/dev/sda1' could not be mounted.
guestmount: Did you mean to mount one of these filesystems?
guestmount: /dev/sda1 (ntfs)
guestmount: /dev/sda2 (ntfs)
yum -y install ntfs-3g
still........
It's really simple and just a matter of the following line within the subnet declaration.
deny unknown-clients;
See example below:
subnet 10.25.20.0 netmask 255.255.255.0 {
range 10.25.20.11 10.25.20.254;
deny unknown-clients;
option routers 10.25.20.10;
option domain-name-servers 208.67.222.222;
 ........
So you've got a responsive site with tables but it breaks them so anything not viewable on the screen is now cut off.
Here is a simple solution that will allow users to scroll horizontally so they can see the whole table:
&........
Upgrading from PHP 5.3 to 5.4+ there are many challenges basic things like mysql_connect() do not work anymore.........
You are using Centos 5 which is deprecated so nothing in yum will work until you follow this post to use the vault:
http://realtechtalk.com/Centos_59_Working_Vault_Repo_file-1921-articles
yum update
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* epel: fedora-archive.ip-connect.vn.ua
Traceback........
This through me for a loop when I would do a cp -rf or mv -f nothing would get overwritten even if piping y or yes to the command.
Type alias and you'll see why:
alias cp='cp -i'
alias l.='ls -d .* --color=auto'
alias ll='ls -l --color=auto'
alias ls='ls --color=auto'
alias mv='mv -i'
alias rm='rm -i'
The -i is a safeguard against messing things up but however does mess things up worse when you know what........
The code may lead you to believe you have an incompatible template but if you are not trying to use an old template currently that is not the issue. I actually deleted all 3.x style templates to make sure.
What the issue is, is old plugins that are not compatible but Vbulletin does not seem to account for this except that you'll see a fatal PHPerror. You should disable all plugins and then enable one by one until you find the one that is causing the issue.
&........
iptables -t NAT -A PREROUTING -s 24.30.44.0/24 -j DNAT --to-destination 10.10.10.1
iptables v1.4.7: can't initialize iptables table `NAT': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
Solution
# it is case sensitive "nat" and DO NOT use "NAT" or you will get this error!
iptables -t nat -A PREROUTING -s 24.30.44.0/24 -j DNAT --to-destination 10.10.10.1........
This happens if you are running a kdenlive script from the shell of a remote machine without using SSH "-X" forwarding and it will also cause any areas where you write text to be a white screen for that duration.
melt FusionFestival.kdenlive
No LADSPA plugins were found!
Check your LADSPA_PATH environment variable.
[producer_xml] failed to load transition "qtblend"
[producer_xml] failed to load transition &q........
virt-list-partitions kvmusertest.img
/usr/bin/supermin-helper exited with error status 1.
To see full error messages you may need to enable debugging.
See http://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs at /usr/bin/virt-list-partitions line 177.
#solution
update-guestfs-appliance........
myisamchk can fix it
But be careful and use the right options to avoid losing data. In fact if you haven't you should make a backup or at least manually copy /var/lib/mysql.
Replace "YourDB" with the name of your database
Replace "yourcrashedtable" with the name of your crashed table.
The -o option is the safest and should avoid dataloss whereas -r is more aggressive and is a last option (I have lost data using -r and........
Sep 12 18:16:25 vps pluto[7299]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 192.5.6.2 port 20640, complainant 192.5.6.2: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)]
Some say changing the "leftprotoport=17/%any" will fix this but I have not found this to be the case.
Essentially it means at least one end is blocking the ipsec packets. Sometimes the %any allows an alt........
Centos 5 is not supported running yum will produce an error like this:
YumRepo Error: All mirror URLs are not using ftp, http[s] or file.
Eg. Invalid release/
removing mirrorlist with no valid mirrors: /var/cache/yum/base/mirrorlist.txt
Error: Cannot find a valid baseurl for repo: base
Solution - Update this file CentOS-Base.repo
# CentOS-Base.repo........
Just a note before you do this you should have a sure, guaranteed way into the system such as local, KVMor preferably publickey making bruteforce SSH absolutely impossible since there is no password to bruteforce and even if someone knew the password they wouldn't be able to login except from the local console (presumably you should make sure no one unauthorized has physical access).
1. Edit /etc/ssh/sshd_config
Find the section like this:........
I have never had this error on Linux and this is running FreeBSD as root:
Wed Aug 9 04:29:34 2017 us=329050 Cannot allocate TUN/TAP dev dynamically
Wed Aug 9 04:29:34 2017 us=329832 Exiting due to fatal error
The Solution
You need a kernel module that is for some reason not automatically loaded like Linux:
kldload if_tap........
First of all check to see which version if any you have available for a downgrade:
apt-cache showpkg packagename
Downgrade/Install old package:
apt-get install package=version
Example
apt-cache showpkg caja
Package: caja
Versions:
1.10.3-1+rafaela (/var/lib/apt/lists/packages.linuxmint.com_dists_rafaela_import_binary-amd64_Packages) (/var/........
In Debian/Ubuntu this is called "holding".
To hold/exclude a package from being installed or upgraded:
sudo apt-mark hold packagename
To allow the upgrade/installation unhold:
sudo apt-mark unhold packagename........
Intel NUC J3455 vs Vorke V1 J3160
Both are excellent units but the J3160 is nicer if you require even lower power usage (6W vs the Intel 10W). The price is attractive on the Vorke V1 as well. It's been said that the Intel J3455 NUC has a buggy BIOS and some other issues that require attention.
The Intel J3455 is still nice because it has 2 RAMslots but it does get hotter due to lack of fan.
The Vorke V1 runs cooler, uses less power an........
When using the .sh script the rendering doesn't work after an upgrade of related packages to kdenlive.
kdenlive (kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1)) with affine or composite transitions was fine but is now broken during the time of transition it is just a white screen.
The previous version was fine:
kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1
But now I can't find it or install it:........
cagecoin linux compile:
sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev
libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev
libssl-dev libdb++-dev libminiupnpc-dev
Solution:
sed -i s/"BOOST_LIB_SUFFIX=-mt-s"/"#BOOST_LIB_SU........
Solution:
Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt
sudo aptitude install wine
The following NEW packages will be installed:
ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6
wine1.6-amd64{a} wine1.6-i386:i386{a}
The following packages will be REMOVED:........
When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right.
Solution for me:
My example uses 3 videos in total so "n=3" and a=1 to include audio.
ffmpeg -threads 12 -i file1.mp4 -........
I believe from what I've read that this card's driver doesn't support the features after trying all known troubleshooting methods.
ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload -c:v hevc_nvenc -profile main -preset slow -rc vbr_hq -c:a copy uservideoRendered.mp4-test
ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload........
#if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used
wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2
tar -jxvf ffmpeg-3.3.2.tar.bz2
cd ffmpeg-3.3.2/
./configure --disable-yasm
install prefix /usr/local
source path ........
Very simple browse to your /boot directory
It does make more sense to extract the image in its own directory eg "initramfs-blabla-dir" as it will literally extract directly to the pwd.
cp initramfs.img someotherdir
cd someotherdir
zcat initramfs-3.10.0-514.el7.x86_64.img | cpio -idmv........
The old MBR 512 bytes partition table is no longer valid if you are using GPT.
To copy a GPT table with dd to another disk do it like so:
Below sda is the source disk and destination disk is sdb (change to meet your needs).
Depending on how you use this, you have to be careful. The assumption is that you should only dump the partition table back to a disk you will newly format. If not you'll need to ch........
This will give you a lot more nice fonts to work with. Usually you must restart the program you are using to see the new fonts.
ttf-mscorefonts-installer fonts-larabie-* ttf-xfree86-* ubuntustudio-fonts ttf-* fonts-*........
Done on Centos 7.3 very important as clearly based on older guides it was a lot easier and more simpler! Hint do not use grub2-install!
If you have trouble booting after this check this CentOS mdadm RAID booting/fixing guide.
One huge caveat if you are an oldschool user or sysadmin who has avoided UEFIbooting
The nor........
user@box:~$ sudo tune2fs -l /dev/md99
[sudo] password for user:
tune2fs 1.42.9 (4-Feb-2014)
Filesystem volume name:
Last mounted on: /mnt/md50
Filesystem UUID: 976a8655-2619-4587-878c-dab07f7b7652
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Fi........
This error is usually because of some sort of encryption in this case a Seagate enclosure with encryption (even though not enabled) did not allow this hard drive to boot.........
This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether.
Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........
I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us
yum install automake curl openssl-devel libcurl-devel gcc gcc-c++
yum -y install kernel-devel-`uname -r`
yum -y install unzip
#the........
Why won't my Linux Mint boot after I manually installed a new kernel?
eg.
apt-get install linux-image-newerone
Do this
dpkg -l|grep linux-image|grep extra
ii linux-image-extra-3.16.0-38-generic 3.16.0-38.52~14.04.1&nb........
When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help).
At first cudaminer will give you these errors:
stratrum_recv_line failed
...retry after 15 seconds
GPU #0: Geforce 210 with compute ca........
sudo mkdir -p /etc/X11/xorg.conf.d/
sudo vi /etc/X11/xorg.conf.d/20-intel.conf
On newer Ubuntu / Mint / Debian systems the file would go in: /usr/share/X11/xorg.conf.d/20-intel.conf
Type "i" and enter the following:
Section "Device"
Identifier "Intel Graphics"
Driver&n........
**** Warning: can't process font stream, loading font by the name.
Can't find CMap Identity-UTF16-H building a CIDDecoding resource.
Warning: falling back to Identity ordering
**** Error reading a content stream. The page may be incomplete.
**** File did not complete the page properly and may be damaged.
**** This file had errors that were repaired or ignored.
****........
Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues.
Take for example the error messages from Linux Mint:
[804829.895414] usb 1-1: USB disconnect, device number 11
[806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........
This sounds silly but if you don't know you don't know and the cable name is "RP-SMA" and allows you to extend your wifi antenna as long as the cable goes.........
Finally after ages I found the solution which is on many pages on the net but not obvious and should have been standard or more common info!
Instant Solution:
Type this into the terminal (unfortunately the driver config menu doesn't have the option as itis hidden):
nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceCompositionPipeline = On }"
Make permanent
Cli........
Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user:
Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4
Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........
These errors believe it or not are simply because of not being the root user or running with sudo! However if you didn't know to try as root you'd think there was a problem with your burner or disc Essentially it looks like without root you cannot send the required scsi commands to continue writing. Ithink cdrecord should have built-in tests or safeguards to see if it has the permissions to run the required commands.
I guess for more advanced users the idea is simila........
Transaction Check Error:
file /usr/lib64/php/modules/fileinfo.so conflicts between attempted installs of php-pecl-fileinfo-1.0.4-2.el6.rf.x86_64 and php-common-5.3.3-49.el6.x86_64
solution you can't install php-pecl-fileinfo it seems to be incompatble with the php5.3 being installed:
yum --exclude=php-pecl-fileinfo --skip-broken --disablerepo=epel install php-*........
*Update so this doesn't work it must be something to do with the path of nfs or something else but the installer fails with "Installer crashed" at the end whereas with the CD/USB it works.
This assumes you've already installed and configured a separate PXE/DHCP server somewhere else and your /tftpboot directory is setup.
This is for Linux Mint 18.1 but generally applies to most versions although you may have tro change things like "casper"........
Just make sure you have php-xdebug installed and edit your php.ini:
[xdebug]
xdebug.profiler_enable = 0
xdebug.profiler_enable_trigger = 1
xdebug.profiler_output_dir = "/tmp/xdebug/"
xdebug.output_name = "cachegrind.out.%t-%s"
Also make and set permissions on /tmp/xdebug:
mkdir /tmp/xdebug
chmod 777 /tmp/xdeb........
Does this mean? [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
Basically it means you created your SSL Certificate as a CA the wrong way, usually with this command:
openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key
How can you fix it and do it properly?
Step 1.) Make a new Private KeyCreate server pass key:........
I'm getting this error randomly but suspect it is an update or application conflict. It also takes ages for this "collection" to happen.
"system_thread_exception_not_handled (srv.sys)"........
This happens on any file an even just typing "vi"whereas it never happened before. I suspect an update or environment variable is causing this issue
When entering vi I get this weird stuff
line 58:
E488: Trailing characters: t_Sbet
line 63:
E171: Missing :endif
When exiting vi I get this weird stuff
t_Sb=^[[4%?%p1%{1}%=%t........
I've had this issue since Ubuntu 9 and now even on Linux Mint 17 no matter what latest version of the Nvidia proprietary driver that I use. It just becomes slower and slower and only gets better after rebooting or restarting Xorg.
Someone here has it as well
https://askubuntu.com/questions/822449/graphics-becomes-slow-after-a-while/917886
It's very fru........
Using Apache 2.2 and PHP5.6 PHPBB3 is very slow to respond. Actually for some reason it takes so long to even register a log entry in access_log as in several seconds or a few minutes later it shows up in Apache. All other vhosts and Apache access stops working and freezes until the request to access PHPBB3 slowly completes.
It seems to randomly be slow if you stop using it whether for posting or reading the forums. I've migrated to different machines including........
A lot of times these files seem to lag and be incredibly slow even if just a few dozens rows of data.
Here is how you can convert it with "gnumeric":
ssconvert file.xlsx file.csv
You may get lots of weird errors like this but the conversion seems to work fine:
(ssconvert:15244): GLib-GObject-WARNING **: g_object_set_valist: object class 'SheetObjectImage' has no property named 'style'........
You can actually just pass multiple "-L" statements to achieve this.
An example is as below:
ssl -L 80:192.168.10.5:80 -L443:192.168.10.5:443 -L2068:192.168.10.5:2068 -L 8192:192.168.10.5:8192 user@remotehost.com
The above essentially is saying forward ports 80,443,2068,8192 to the remote IPof 192.168.10.5 (even though it is behind NAT). Essentially SSH will do the NAT part even if the........
This error is commonly due to Java security or TLS settings but there is a second issue with forwarded ports that also causes it.
1. Java Security/TLS Settings issue:
This article has the solution to change them all in Linux automatically
2. Port Forwarding Issue if your Avocent DSR is behind NAT/private IP........
The solution is simple this happens if you don't meet the requirements. In my case PHP 5.4 was required but I had PHP 5.3 installed. Once I installed a newer version the install of PHPBB was successful.........
Ihave a tar and when extracting it changes /root to a uid and gid of the source server which is bad especially for /root!
You can get around this by extracting as follows:
Add the -o switch which means "--no-same-owner"
tar -o -zxvf sometar.tar.gz........
Centos 7 is no cakewalk, there are many fundamental features and basic utilities that are missing or even completely renamed or different!
Another shocking thing is to check your NIC it is set by default to not turn on when booting!
And by the way there is no more standard eth0 the NIC convention is now "enp0s3"
vi /etc/sysconfig/network-scripts/ifcfg-enp0s3........
There are usually two reasons for this.
#1 The most common is that you need to enable the -r (recursive) flag with zip to make it recurse into directories.
So the solution is to use -r
zip -r somefile.zip yourfiles
#2 If you are using bash scripting based on ls without the full path or for some other reason the full path is missing, zip looks for the files in the current directory so this will always fail.........
A common mistake is people think you should tell the li padding to be 0px but this is wrong.
All you need is the following code in line:
your item
your item
In a css class:
.yourclass {
ul.margin: 0px;........
whois in Linux is incredibly out of date and does not seem to recognize most new TLDs domains, but there is a quick and easy tip/hack/tweak for this.
An example of new TLD's site as .review .site .club
whois somesite.club
No whois server is known for this kind of object.
bash to the rescue
Now I did try to apply this in .bashrc but DONOT! Ithink the * wil........
This is especially helpful if you run your own servers. If you are presented with an error message or warning that the signature has changed or does not match the IP/domain you are connecting to you always want to verify manually.
So your e-mail/web client will show you an SHA-1 fingerprint like this:
"Could not verify this certificate because the issuer is unkown" or other reasons such as a mismatch in IP/domain.
It will also show you........
In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below.
mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore.
[45817.162728] ata4: exception........
1.) Replicate the number of partitions in your new drives.
gdisk /dev/sda
gdisk /dev/sdb
I created 3 partitions of the same same size.
partition #1: +1G (/boot)
partition #2: +60G (swap)
partition #3: rest of it (/)
#note if you are using GPT/gdisk you need to create separate a partition at least 1MB in size (in my case I would a 4th partition and mark it type ef02).........
The solution is simply "tidy"/Tidy-HTML. It will take your poorly formatted HTML code (and I mean files that span just a few lines that are unreadable) and fix it up.
Note the command below does everything in place. *Make sure you take a backup of all .html files*
It also seems to break html5 code/templates so beware.
tidy -im yourfile.html
An automated way in bash:........
The "passwords do not match" implies or makes it appear that your auth code is wrong but actually you have to click "View additional settings" and then see there are 2 password fields to manage the domain once it is transferred (the password is typed twice for confirmation). Simply fill out a password twice or remove the first password fields contents and all will be well.........
At first I thought it's just not possible but there is actually an option that can be enabled to make symlinks work with Samba.
Then I put this under the [global] section
Note: It's "wide links" and not "wide symlinks" (some other sites have incorrect info which was a frustrating waste of time :))
Add this to your smb.conf
follow symlinks = yes
wide links = yes
unix ex........
Remove the failed partition /dev/sde1
mdadm --manage /dev/md99 -r /dev/sde1
mdadm: hot removed /dev/sde1 from /dev/md99
Now add another drive back to replace it:
# mdadm --manage /dev/md99 -a /dev/sdf1
mdadm: added /dev/sdf1
A "cat /proc/mdstat" should show it resyncing if all is well.........
Solution:
yum -y install --skip-broken package-you-want-to-install
Packages skipped because of dependency problems:
php56w-mysql-5.6.30-1.w6.x86_64 from webtatic
Error: Multilib version problems found. This often means that the root
cause is something else and multilib version checking is just
pointing out that there is........
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was
12: Timeout on http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds')
Error: Cannot find a valid baseurl for repo: base
You would think this should be fine and simple like using a proxy with most other software?
However........
Ifigured out what caused this but don't have the solution just yet. Iwould deploy a certain script from a .tar.gz to some servers and found that /root was always owned by user and group "1000.1000". This corresonded to the user who made the .tar.gz.
For some reason when extract normally with "tar -zxvf file.tar.gz" it impacts the parent directories ownership. There must be some recursion going on or possibly the .tar.gz but I haven't f........
This can be a case of bad permissions or modes as the error says. Normally one would assume permissions but often a script may change ownership of /root to something else.
This was the case half the time I've encountered this.
So in short make sure ownership is correct
chown -R root.root /root........
This was a surprising bug but I unplugged all drives for an array md127. At first it was just 1 drive and mdadm seemed to notice this. I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it. This created problems trying to unmount it or even to stop this array with mdadm freezing.
As for how to fix it I can only think of making sure you are not in a mounted path of........
Cannot even "Browse Network" when clicking on "Windows Network"
Unable to mount location
Failed to retrieve share list from server: No such file or directory
logs:
[2017/02/14 00:16:44.271314, 0] ../source3/nmbd/nmbd.c:58(terminate)
Got SIGTERM: going down...
[2017/02/13 17:35:41.797944, 0] ../lib/util/become_daemon.c:124(daemon_ready)
&........
Uh oh
[17925926.174277] block drbd0: Handshake successful: Agreed network protocol version 96
[17925926.174325] block drbd0: conn( WFConnection -> WFReportParams )
[17925926.174342] block drbd0: Starting asender thread (from drbd0_receiver [1682])
[17925926.174432] block drbd0: data-integrity-alg:
[17925926.174581] block drbd0: drbd_sync_handshake:
[17925926.174586] block drbd0: self 2AAE66AF9252D6DB:2815BF........
Many users still are not aware but simply patching OpenSSL does not secure you against many known and easy to exploit attacks that will render your encryption useless by an attacker.
Use the following setings in /etc/httpd/conf.d/ssl.conf
SSLCipherSuite "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH EDH+aRSA !CAMELLIA !SEED !3DES !RC4 !aNULL !eNULL !LOW !MD5 !EXP !PSK !........
This actually only happened after an e-mail server ran out of space due to run away log files. Normal Desktop clients were not affected. It appeared to be a bug in K9 mail but even reinstalling/wiping all settings did not fix it (read e-mails would still not reappear).
This is moreso a bug in Dovecot where it probably messes up the index files.
How do you fix this in Dovecot/your e-mail server?
You need to delete the do........
This happened while updating Linux Mint/Debian/Ubuntu on a remote SMB/Samba share.
Solution
After waiting for updates to complete things will work normally but it really is strange that the service actually stops working or is disabled for so long during the update. It is likely the update process stops the serivce and only restarts after the update is complete.........
This happens sometimes that it takes a fair amount of time for some WHMCS installations but it usually ends up completing eventually.........
The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files.
UPDATE user SET password=password("newpass") WHERE user='root';
flush privileges;
ERROR 2013 (HY000): Lost connection to MySQL server durin........
Disclaimer, before starting this I do not like ioncube, it is great to protect your source code, but a big pain to setup this extension since it has to be done manually. Further, fi you do a PHPupdate ioncube may no longer work, causing important sites or services to not work (I wish authors would take another approach).
1.) Download from here:https://www.ioncube.com/loaders.php
2.) Extract the contents and co........
PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the chosen SHM segment size is higher than the operation system allows. Linux has usually a default limit of 32MB per segment. in Unknown on line 0
PHP Fatal error: PHP Startup: apc_shm_attach: shmat failed: in Unknown on line 0
This error is not at all fun because it actually prevents Apache/httpd from starting or working at all. It will........
An easy way to pay companies and friends/family since PayPal does not have an option when sending money to make it a subscription:
"business" = The e-mail or PayPal ID of the person/organization to pay to.
a3 The recurring amount "eg. 115" will be 115 USD
p3 The time period (eg. 2)
t3 Unit of time period m=monthly,w=weekly,y=yearly
item_name = "the note/product service reason you are paying ha........
# yum -y install qemu-kvm
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: mirror.lzu.edu.cn
* elrepo: ftp.utexas.edu
* epel: ftp.jaist.ac.jp
* extras: mirrors.aliyun.com
* openvz-kernel-rhel6: mirror.fdcservers.net
* openvz-utils: mirror.fdcservers.net
* updates: mirrors.nwsuaf.edu.cn
Resolving Dependencies........
I created a new partition table on a newly plugged in device and it caused fdisk to hang (even force kill does not work). It also may be a bad drive or some other issue because fdisk -l hangs after the first 2 HDDs (totaly of 8 HDDs on this system):
[1232879.903596] INFO: task fdisk:27176 blocked for more than 120 seconds.
[1232879.903607] Tainted: P&nbs........
I keep reading these drives are slower, but they are cheap and still SSDand work very fast for my needs.
As you can see the sequential read is 481-491MB/s, if I put them in MDADM RAID10 mode (normal RAID1) they should give me well over 900MB/s and with redundancy and being very cheap for what they offer.
[1232206.315622] scsi 8:0:1:0: Direct-Access ATA ADATA SU800&........
sudo fdisk /dev/sdh
WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: The size of this disk is 8.0 TB (8001563221504 bytes).
DOS partition table format can not be used on drives for volumes
larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID
partition table format (GPT).
The device presents a l........
The only way I've found in mdadm to make 2 drives perform like a proper RAID 1 (eg. the read speed should be 2x that of a single drive) is to use the --layout=f2 (far 2).
mdadm raid10 performance issues.
Be very aware that mdadm seems to default to layout=n2 (which means near). In this scenario it means it is like mdadm RAID 1 performance (you get maximum read speeds of a single drive).
dd if=/dev/md126 of=/dev/null bs=1M cou........
You are checking your MySQL logs in /var/log/mysqld.log and come across an error like this:
161222 18:03:40 [ERROR] /usr/libexec/mysqld: Table './eximstats/sends' is marked as crashed and last (automatic?) repair failed
The Solution:
cd /var/lib/mysql/eximstats
myisamchk -r sends.MYI
- recovering (with sort) MyISAM-table 'sends.MYI'
Data records: 71129........
iptables -t nat -A OUTPUT -m addrtype --src-type LOCAL --dst-type LOCAL -p tcp --dport 3306 -j DNAT --to-destination ip.ip.ip.ip
iptables -t nat -A POSTROUTING -m addrtype --src-type LOCAL --dst-type UNICAST -j MASQUERADE
sysctl -w net.ipv4.conf.all.route_localnet=1
Make sure you substitute "ip.ip.ip.ip" for your real public IP and also the "--dport 3306" for the port you want to forward.
Finally run the sysctl command and........
forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X
forcedeth 0000:00:08.0: eth0: MSI enabled
forcedeth 0000:00:08.0: eth0: no link during initialization
ADDRCONF(NETDEV_UP): eth0: link is not ready
forcedeth 0000:00:08.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 1 18:21:32 box15 kernel: forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
Dec 1 18:21:32 box15 kernel........
The only solution after trying many suggestions was to simply restart the "vz" service (definitely not preferable).
Even doing an ifdown and ifup for venet0 did not help.
ifup venet0
Bringing up interface venet0:
Configuring interface venet0:
net.ipv4.conf.venet0.send_redirects = 0
RTNETLINK answers: Network is down
Some errors from log:
CPT ERR: d2dc60........
md127 issue, it should be /dev/md3 per mdadm.conf
Any time something is mounted as md127 it almost always means there is no entry for this mdadm array in the mdadm.conf in initramfs (which is separate from your actual /etc/mdadm.conf).
cat /etc/mdadm.conf
ARRAY /dev/md3 metadata=1.2 UUID=b6722845:381cc94e:7a2c5b5f:8e3b7c4f
The reason for this is something strange, most Linux OS's bizarrely always keep their own copy of /etc/mdadm.con........
Everytime I've seen this error "/dev/drbd0: State change failed: (-2) Need access to UpToDate data" it is because DRBD has no disk:
cat /proc/drbd
version: 8.3.13 (api:88/proto:86-96)
GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51
0: cs:Connected ro:Secondary/Secondary ds:Diskless/Inconsistent A r-----
ns:0 nr:0 dw:0 dr:0 al........
Now many people report this card simply not working in various Linux distros and kernels. My issue is different, it always works at 100mbit (eg. plugged into a 100mbit switch) but no matter what 1000M/gigabit switch I would try, it would never work.
The link would be up (the lights were on) and the OS detected the link as being up as well but it wouldn't work at all and could not pass data in or out (not even a ack/ping).
There is one simple solution and command........
M4A is a weird format, so you have to be creative here is a quick copy of what I did.
Basically you need to convert to .wav to make use of them and thenI converted the resulting .wav into an mp3 (nice small file size and basically universally playable):
=======
sudo apt-get install mpg321 mp3gain faad normalize lame
faad "Voice 002 (copy).m4a"
faad "Voice 002 (copy).m4a"........
Tired of checking iotop and seeing that your drbd partition is using 99.99% of io all the time and finding your drbd device performs slow in general?
This is especially an issue in versions of DRBD in the 8.3 tree in particular one documented case is on "8.3.13" but it likely applies to other devices.
The symptoms are that resyncing is fine and normal but any reasonable amount of activity is very slow and lagged and creates a high server load and con........
It is possible to tell mdadm to create an md device on a raw disk even though it will give you an error, it writes a superblock and this corrupts the partition table which can result in your system not booting.
To fix it just zero the super-block on the offending device that you made the mistake in.
Eg: /dev/sda
mdadm --zero-superblock /dev/sda
It is also a way of starting fresh if you wanted to create a new array.........
vzkernel-2.6.32-042stab116.2.x86_64.rpm&n........
We've all done this at some point, you work on the wrong shell window and this was my first time making this mistake but I deleted a partition table in fdisk, recreated it and saved it with "wq" and even ran partprobe! If you haven't rebooted yet then you can still recover your partition table, otherwise you're in big trouble.
Fortunately since it was a live system and in use the kernel still had to use the old table like below:........
migrating from an old OpenVZ (Centos 5) to new OpenVZ (Centos 6)
Also if migrating from 32-bit HN to 64-bit your RAM will probably be much bigger than it should be!
16x bigger
eg. 32bit HN:
total used free shared buffers cached
Mem:&nb........
I still cannot understand how this would not be enabled by default and I struggled to find the reason why with manually installing samba etc.. wondering why the option for sharing was not in the menu.
On Linux Mint "MATE" the package is called "caja-share" and on Cinnamon it is called "nemo-share" so edit the below command as necessary:
*Also note that the "samba" package is necessary as it is not inst........
Syncing private
Live migrating container...
Syncing 2nd level quota
11000: invalid option -- F
Usage: vzdqload quotaid [-c file] commands
Loads user/group qouta information from stdin into quota file.
-c file use given quota file
Commands specify what user/group information to load:
-G grace time
-U disk limits........
I have not found the source of this but essentially it seems like drbd and ext4 may not play well but I have to confirm still.
In either case an older DRBD setup with older hard drives seems to have little to no iowait, but the main difference is the drbd partition is ext3 and not ext4. I will experiment and see if that fixes this, then we will know that DRBD and ext4 have issues.........
I do not understand why heartbeat would try to communicate with another system not considered part of the node:
heartbeat: [8280]: WARN: string2msg_ll: node [otherbox.com] failed authentication
........
rm /vz/lock/1200.lck
rm: remove regular file `/vz/lock/1200.lck'? y
vzctl start 1200
Container already locked
vzctl start 1200
Starting container ...
vzquota : (error) can't lock quota file, some quota operations are performing for id 1200
vzquota on failed [7]
vzquota off 1200
vzctl start 1200
vzquota on 1200
root@rttbox ~]# vzquota off 1200
vzquota : (........
This happened while an mdadm array was syncing, all access from writing a new blank file to opening a small .txt file was very slow:
[222117.312078] kjournald starting. Commit interval 5 seconds
[222117.685060] EXT3-fs (md0): using internal journal
[222117.685096] EXT3-fs (md0): mounted filesystem with ordered data mode
[222122.376847] kjournald starting. Commit interval 5 seconds
[222122.602825] EXT3-fs (md2): using internal jour........
You may get this after a long time of not rebooting but especially if you have rsync'd a / partition or deployed an image to another VPS or computer, you will often have this issue.
The good thing it usually just takes a reboot.
Here is more info from Centos........
kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3)
Varying opinions are out there but in general it seems like the most common culprit is a lack of privvmpages, with a modern OpenVZ system the best way is to set privvmpages as equal to what your RAM is and this has resolved the messages on another system.
If it's truly a TCP issue you can adjust the following parameters:........
When you start uploading larger images in Wordpress you have to make sure your maximum attachment size is large enough and that the execution time is not too short:
Uploading
Error
HTTP error.
[Thu May 12 16:32:25 2016] [error] [client 10.10.5.2] PHP Fatal error: Maximum execution time of 30 seconds exceeded in /httpdocs/blog/wp-includes/class-wp-image-editor-gd.php on line 182
Solution Edit p........
This is a common mistake but many people do not realize this function comes from mysql itself, so therefore you need an active mysql connection open.
Usually the string will be empty and null when you call it from outside of the database connection portion of your code.
eg. an example of the wrong way and creating a null/empty string
$var = mysql_real_escape_string($myself)
mysql_connect();
// returns n........
This can happen because port 80 is not open, or your license has expired and/or your IP is out of date and also if the license server itself from cPanel is having issues.
In most cases as long as you have a valid license the following command will solve it:
/usr/local/cpanel/cpkeyclt
Updating cPanel license...Done. Update succeeded.
Building global cache for cpanel...Done
Cannot........
pip install obfsproxy
/usr/lib/python2.6/site-packages/pip/_vendor/requests/packages/urllib3/util/ssl_.py:90: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.
InsecurePlatformWarning
You are using pip version 7.1.0, however version 8.1.1 i........
curl -k https://somesite.org
curl: (35) SSL connect error
The site used to work until I got a new SSL cert
Updating curl with (yum -y install curl) made it work again.
........
Does anyone have any suggestions on how to handle this error code? It is for a client who has a Windows 2008 R2 Datacenter License and wants to install virtual instances on the same host.........
Stopping httpd: [FAILED]
Starting httpd: httpd: Syntax error on line 73 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared obje........
This is a simple fix but not a simple problem and it still doesn't make sense to me.
But in a nutshell if your target proxy server works fast when accessing directly over SSL then this may be your issue.
It seems SSL does not play nicely when the target proxy destination/host has a riduculously long key (such as 8192 bits long). Now this is normally not a problem, in fact the target server could be accessed with hardly any delay directly despite such a long key.........
At first my BIOS said the card may not work right because there is no more option ROM space.
I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly.
But it still cannot initialize the card properly(does not work):
[ 33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........
Download from here http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9200-8e#downloads
sudo Installer_P20_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash -listall
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
&nbs........
There are a few ways of doing this and all basically involve using the reverse proxy or "ProxyPass" feature of Apache to accomplish it.
1.) Create a normal vhost and simply symlink the root directory of the site you want to mirror.
Eg. originalsite.com and newsite.com
/vhosts/originalsite.com/httpdocs
You would symlink like this:
ln -s /vhosts/originalsite.com/httpdocs vhosts/originalsite.com/........
The first thing to diagnose is what is actually in the database (use PHPMyAdmin or CLI).
You will of course either find that the backslash is either in the database or not.
If the backslash is in the database you probably have magic quotes gpc/runtime on and/or are calling the "addslashes()" function which does this.
If you are escaping your data with mysql_real_escape_string() then think again, you probably have magic quotes gpc enabled either in php.ini or........
1.) Flash directly to this file:
http://tomato.groov.pl/download/K26RT-N/build5x-132-EN/Linksys%20E-series/tomato-E2500-NVRAM60K-1.28.RT-N5x-MIPSR2-132-Max.zip
*I was never able to get the larger "Mega" file to work, at least not initially so I recommend the file above.
To enable 5ghz I had to do the "Clear NVRAM" Option before it was shown.
2.) Or if you don't need 5ghz (most devices do not support it and cannot........
The problem is that the default of most of these units is set for non-North American phones so the ring sounds like it cuts off and is not sequential.
How To Fix the Issue
Click on "Regional" and make sure you are in Advanced mode.
........
If Linux Mint 17 or other has no window buttons/controls you can do the following from terminal:
marco --replace&
Sometimes it can be fixed if you go to your themes/appearance and choose a new one but in the case like mine where Compiz is installed but not running/working then that fix will not work and will require the marco command above.
What if you can't type in a terminal Window?
If you close........
The Scenario
You have dual NICs and you disable NIC1 which uses 192.168.1.1 as its gateway. With NIC2 you enable it/connect it to another network which also has the gateway 192.168.1.1
Everything will work fine at this point.
When switching back to NIC1 even with NIC2 disabled and even unplugged, the OS basically can't pick up the new/updated ARP entry of the old device for 192.168.1.1 and perhaps thinks it is a security risk or spoof of some sorts and blocks i........
Iwill start by saying I think I know what caused this boot-time error on Linux Mint but should also apply to Debian and Ubuntu.
I changed my BIOS time to several hours in the past to match the current time, but this caused Linux to think there were incorrect filesystem times.
The problem is that it seems when you hit this I am not sure what is happening, it doesn't seem to be doing fsck and hangs without prompting the user.
What I have found is that........
The location of the hash is stored in the configuration.php file and is really a bit of pain to have to pull out everytime but this is how WHMCS stores its encryption key hash to see the full credit card number.........
Device Boot Start End Blocks Id System
/dev/sdc1 1 132 1060256+ fd Linux raid autodetect
Partition 1 does not end on cylinder boundary.
Partition 1 does not start........
This command in Debian/Ubuntu/Mint will get everything need installed for most Java based KVM viewers:
sudo apt install icedtea-netx
The following additional packages will be installed:
ca-certificates-java icedtea-netx-common openjdk-8-jre openjdk-8-jre-headless
It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post.........
This was a horrible shock after upgrading fromUbuntu 9 to Linux Mint 17 and I found that the last distro to support tsclient was Debian Squeeze.
For some reason it has disappeared for a long time and the new options such as rdesktop and gnome-rdp do not have any start menu entry and just aren't done as well as tsclient.
Fortunately there is a solution:
tsclient surprisingly can be downloaded as a direct .deb package and it fails with some variou........
It freezes on"grub> setup (hd1)
Checking if "/boot/grub/stage1" exists..."
Basically it looks like the partiion table is corrupt or the data/files are not there.........
grub> root (hd0,0)
root (hd0,0)
Filesystem type is ext2fs, partition type 0xfd
grub> setup (hd0)
setup (hd0)
But if you do:
root (hd1,0)
setup (hd1)
it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical).
Checking if "/boot/grub/........
A handy trick in bash that can be adapted to many useful tasks:
for i in {1..99}; do
echo $i
done
1
2..
97
98
99
100
Another tricky is if you need a 0 in front of the first letters:
for i in {1..12}; do
if [ $i -lt 10 ]; then
i=0"$i"
fi
echo $i........
I was asked to troubleshoot why a site wasn't loaded or responding properly, it turned out they were using some old javascript tracker from Bing/Microsoft that is no longer valid or working. You have to wait forever for it to time out but it really did disrupt the functionality of a very important site:
flex.atdmt.com
If you have the above code in javascript on your site remove or comment it out.........
It is a common issue and here is the solution (increase the density/dpi):
convert -density 120 some.pdf output.jpg
You will need to play with the density setting to get the perfect file size and resolution.
If you want a smaller file you can always use the "-quality" switch and eg. -quality 25 would be 25%/100 quality........
In plain English this happens after you upgrade VBOX and it rebuilds kernel modules based on a newer kernel than you are running (eg. you upgraded your kernel but haven't booted into it).
It is too bad there is not a standard work around that would allow it to realize this and keep old kernel modules and use them if it detects your current kernel is older than the most recently build modules.
===============
RTR3InitEx failed with rc=-1912 (rc=-1912)
The........
In this case we want to mount partition #2
fdisk -lu Centos-6.6-x86_64.img
You must set cylinders.
You can do this from the extra functions menu.
Disk Centos-6.6-x86_64.img: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders, total 0 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot&nbs........
It sounds like this is corrected in later versions of the OpenVZ kernel but Iam not sure, it may also be that a much newer kernel is needed and Centos may not have a recent enough kernel.
*Debain 7.0 however does work fine as a temporary fix or work around.
Debian 8 OpenVZ no IP and networking not working:
lo Link encap:Local Loopback
 ........
How to Increase The Disk and Partition Size in Windows 2022,2019,11,10,8,7 etc.. Server
1, Enter the command prompt
Start -> cmd
2. Start diskpart
diskpart
3. Find the drive that has the wrong size
list volume
4. Select the volume (in this example we use volume 2)
select volume 2
5. Extend the volume........
In this example we have 2 drives in a RAID array and /dev/sdb is the one that failed. /dev/sda1 is also the /boot partition which we tell grub to install on /dev/sdb eg install root (hd0,0) /dev/sda1 on the new drive /dev/sdb (hd1)
First copy the partition table from /dev/sda to /dev/sdb
dd if=/dev/sda of=/dev/sdb bs=512 count=1
Run partprobe to detect the new partition table
partprobe........
Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access.
So in this case you add a second physical or disk or already ha........
In my case I could login with the initial install but I rsync'd everything over while preserving ownership and permissions to another RAID partition and booted from that.was fine before. The problem is that you are kicked out the second you login and the problem was SELINUX for some reason (perhaps it noticed something strange when it was moved to the new partition)
login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
login: ROOT LOG........
#solution
Edit /etc/yum.repos.d/openvz.repo
For the first two entries comment out #mirrorlist and uncomment #baseurl and then it worked
openvz yum problem Centos 6.5 cannot find file on mirror:
yum update
Loaded plugins: fastestmirror
Determining fastest mirrors
* openvz-kernel-rhel6: mirrors.ustc.edu.cn
* openvz-utils: mirrors.ustc.edu.cn
base ........
The solution was to reinstall the vbox dkms package and do a manual modprobe of the modules it makes.
I never sorted out the unable to start due to the USB issue, I did have the guest additions installed but the only way to boot was to change the pointing device from USB to PS2 and then to disable the USB controller (if your pointing device is set as USB, disabling USB will not work because it will re-enable by default when it sees your pointing device is USB, this is w........
Iwas surprised to see that Linux Mint at the latest 17.2 version still has NO mdadm installer option, and worse the installer will not be able to create a proper booting environment even when you do install it.
How to setup mdadm in Linux mint LiveCD
sudo su
apt-get install mdadm
# partition as you need and then create your mdadm devices
# create your SWAP md0
mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /d........
First of all this seems to apply to many ONVIF devices
Hard coded IP: 192.168.1.10 (yes not kidding no DHCP!)
00:12:12:9C:C2:00
To view RTSP stream use VLC, or openRTSP or other RTSP capable software:
rtsp://192.168.1.10/user=admin_password=tlJwpbo6_channel=1_stream=0.sdp
user: admin
password: blank
http://ip/Login.htm
Uses Quicktime and is a poor quality picture and slow
Cannot change pass........
freshclam
ERROR: Can't open /var/log/clamav/freshclam.log in append mode (check permissions!).
ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log).
Tue Oct 13 13:49:35 2015 -> WARNING: Incremental update failed, trying to download daily.cvd
Tue Oct 13 13:49:35 2015 -> WARNING: Can't download daily.cvd from db.local.clamav.net
Tue Oct 13 13:49:35 2015 -> Trying again in 5 secs...........
sudo apt-get install zoneminder
[sudo] password for one:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libuser-perl python-evince kdebase-apps kwrite unixodbc
libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp
python-mediaprof........
[ 2868.041375] ata1: EH in SWNCQ mode,QC:qc_active 0x40 sactive 0x40
[ 2868.041554] ata1: SWNCQ:qc_active 0x40 defer_bits 0x0 last_issue_tag 0x6
[ 2868.041556] dhfis 0x40 dmafis 0x40 sdbfis 0x20
[ 2868.041874] ata1: ATA_REG 0x41 ERR_REG 0x84
[ 2868.042013] ata1: tag : dhfis dmafis sdbfis sactive
[ 2868.042163] ata1: tag 0x6: 1 1 0 1
[ 2868.042301] ata1.00: exception Emask 0x1 SAct 0x40 SErr 0x400000 action 0x6 frozen
[........
So the situaton is this, you depend on things being relevant to where your bash script is and to be safe you want it to be dynamic (eg. do not hard code that we switch to /abc/dir but rather detect where script.sh is located).
scriptlocation="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
The path is then contained the the variable "scriptlocation" so you can cd to it in your script etc............
I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar:
yum -y install python-pip python-devel
No package python-pip available.
#install the EPEL repo
python-pip install obfsproxy
python-pip install obfsproxy
-bash: python-pip: command not found
pip install obfsproxy
&........
root (hd2,1)
Filesystem type unknown, partition type 0x83
grub> root (hd2,2)
root (hd2,2)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd2)
setup (hd2)
Checking if "/boot/grub/stage1" exists... no
Checking if "/grub/stage1" exists... no
#weird thing about grub is that the drive you enter is considered hd0
For example when booted fu........
Use netstat with the -anpe option. The e option shows the inodes and I do not know if it will always work or if it was by fluke but I was dealing with dozens of SSHsessions and needed to know which session was related to which forward (the PIDs of the SSHand SSHD did not match etc...)
Notice the "59560675" and "59560762" those are almost identical, if you find two sets that are nearly identical except for the last 3 digits they may match (in my ca........
Message from syslogd@server at Sep 14 11:35:59 ...
kernel:[Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
Message from syslogd@server at Sep 14 11:35:59 ...
kernel:[Hardware Error]: Error Status: Corrected error, no action required.
Message from syslogd@server at Sep 14 11:35:59 ...
kernel:[Hardware Error]: CPU:6 (10:8:0) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc00400021080813........
iptables -t nat -A PREROUTING -p tcp -m multiport --dports 80,443,2068,8192 -j DNAT --to-destination 192.168.1.175
Just adjust the "--dports" to the ports you need and the --to-destination to the destination IP (note it must be on the same network as the server running iptables........
If you remove the white label on the chip (near the CMOS battery) you will find the following details about it:
SST 49LF080A 33-4C-NHE
It is the PLCC32 type and can be pried and removed safely (but be very careful) with an eye glass flat head screw driver.
If you just have a bad flash you may be able to reprogram your original or just buy another one with the part# above and reprogram it.
This is great news for people who have bricked th........
Phoenix phlash error
Cannot flash when memory managers ( e.g. HIMEM) are present.
press any key to exit.
Use the "/x" option to get past the above
........
1.) My screensaver would take a long time to disable after hitting a key.
2.) Usually errors like below will follow.
3.) Compiz sometimes uses 100% or high CPU
4.) My window controls will disable (eg. the minimize, maximize and close buttons).
It seems like Compiz or appearance/effects disable themselves. Re-enabling Desktop Effects under Appearance temporarily fixes it.
5.) high load in general from things like "Migration" pr........
-------------------------------------
ProCurve J4903A Switch 2824
Software revision I.10.77
Copyright (C) 1991-2009 Hewlett-Packard Co. All Rights Reserved.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to restrictions........
ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
........
Fortunately the format is EATX so an EATX case will work and the screw layout is standard.
You will need to remove the HEX/TORX screws that are connecting the stock HP standoffs (meant to slide into an HP case).
XW9400 Motherboard Issues
Size: 12" x 13"
Proprietary Power Connector
Proprietary CPU Power Connector
Proprietary Memory Power Connector
Fan connectors are 4 pin so you will need some kind of adapter.........
0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2)
0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3)
0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3)
0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1)
0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2)
0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3)
0000:00:05.1 I........
This command rips the audio tracks to .wav files
*I recommend making a new directory with the name of the audio disc first and executing everything from within that directory below.
cdparanoia -B
Use the lame mp3 encoder to encode each one with this script:
*Note that this will encode any other files ending in "cdda.wav"
for track in `ls *cdda.wav`; do lame -b 192 $track; done........
so in this case we have files named like this:
track01.cdda.wav.mp3 track06.cdda.wav.mp3 track11.cdda.wav.mp3
track02.cdda.wav.mp3 track07.cdda.wav.mp3 track12.cdda.wav.mp3
track03.cdda.wav.mp3 track08.cdda.wav.mp3 track13.cdda.wav.mp3
track04.cdda.wav.mp3 track09.cdda.wav.mp3
track05.cdda.wav.mp3 track10.cdda.wav.mp3
but we want to rename them so they are like "05.........
[Tue Jun 23 02:05:52 2015] [error] Unable to configure RSA server private key
[Tue Jun 23 02:05:52 2015] [error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch
The above is an accurate description of what is wrong.
In our case the client made a simple mistake of thinking the localhost.crt and localhost.key (default key locations for Apache SSL in Centos) were in the same directory but they we........
An error occurred during a connection to site.com. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
When the above happens in our experience it is a misconfiguration of........
yum -y install dvdauthor ffmpeg mjpegtools sox bc
rpm -ivh dvd-slideshow-0.8.4-2.noarch.rpm
Preparing... ########################################### [100%]
1:dvd-slideshow ########################################### [100%]
/usr/bin/dir2slideshow: line 553: bc: command not f........
This happened while trying to delete several thousand users from phpBB and basically corrupted the innoDB tables.
InnoDB: Page lsn 3 881164362, low 4 bytes of lsn at page end 881164362
InnoDB: Page number (if stored to page already) 86920,
InnoDB: space id (if created with >= MySQL-4.1.1 and stored already) 0
InnoDB: Page may be an index page where index id is 700
InnoDB: (index "tid_post_time" of table "phpBBdb2005"."phpbb3_p........
It looks like newer versions of Centos no longer have encfs so you have to compile it, only it does not work and fails so those wanting encfs should probably use any other OS which supports it better.........
if [[ "$templatesource" == *windows* ]]; then
partition=/dev/sda2
fi
The * before and after * windows will match this "Ihavelotsofwindowshere"
Of we could have used "windows*" and anything that starts with "windows" will be matched etc...........
This is useful if you are installing Windows and need virtio but of course Windows needs the virtio driver which is on a second iso.
This is the line of code you would add to your kvm startup script and then you get this iso as second cdrom you can browse to for your Windows install of virtio driver's or whatever other use you need it for.
-drive file=/kvmtemplates/virtio-win-0.1-94.iso,media=cdrom........
Dell CS24SC Info
0000:00:00.0 Host bridge: Intel Corporation 5100 Chipset Memory Controller Hub (rev 90)
0000:00:02.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x8 Port 2-3 (rev 90)
0000:00:03.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 3 (rev 90)
0000:00:04.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x16 Port 4-7 (rev 90)
0000:00:05.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 5 (rev 90)........
0000:00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)
0000:00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1)
0000:00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1)
0000:00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1)
0000:00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4........
I'm not sure why I'm getting these but all memory modules are the exact same and all passed memtest successfully although they are ECC. I've heard that ECC RAM can't be tested as well and the kernel seems to indicate they are non-fatl recoverable errors. I wonder if the BIOS has aggressive RAM timing or maybe the controller or motherboard is bad.
[ 12.716515] EDAC MC: Ver: 2.1.0
[ 12.717771] EDAC MC0: Giving out device to........
What matters most about VPNproviders in 2024?
We are highly suspicious of VERYLARGE VPN providers that have LOW PRICES and HUGE DISCOUNTS. The suspicion is that for those who know what costs are involved to purchase thousands of IPs and servers are not small. At the prices that many of the big mainstream providers offer, it is likely unprofitable or barely profitable. Then, how are those companies making money or is that even the goal?
There use........
I messed up the bootloader by accident on a standard Centos 6.3 install because I turned the /dev/vda1 boot partition into an mdadm raid 1. This was all done correctly aside from one point Ididn't realize was an issue metadata=00.90 is the only thing that will allow you to boot (otherwise grub won't work and you won't boot).
So the next step is rescue mode from a CD right? The problem you will find is that grub does not detect your hard drives, this is Ibelieve is be........
If the below is happening on KVM (a very weird and scary looking error) it's probably because of Windows. This has happened countless times to me where the bootsector on Windows 7/2008 becomes corrupted easily (even by a crash or shutdown).
KVM: unknown exit, hardware reason 0x80000021
kvm_run returned -22
rax 0000000000000010 rbx 0000000000000080 rcx 0000000000000000 rdx 0000000000000080
rsi 000000000025db2a rdi 000000000007db2a rsp 0000000000000200 rbp........
Account Functions -> Change Site's IP Address
Choose the domain and then click "Change"
Choose the new IP
1.) Setup SSL Certificate in cPanel
Click on "SSL/TLS Manager" under the "Security" section.
2.) Under " Private Keys (KEY)"
Click "Generate, view, upload, or delete your private keys."
Choose "Key Size: 4096........
Are you getting the same old error message even though your iptables settings for OpenVZ are correct?
iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
The reason is because in newer vzctl the old way of setting IPTABLES="" in vz.conf is completely deprecated (I spent some time fiddling wondering why my settings were correct but........
It is a permissions issue that is hard to fix.
All but one USB device is greyed out.
I am already a member of "vboxusers"
I have already enabled and disabled USB support for the guest.
I have already reinstalled the latest VBOx guest editions
If running as root it all works fine
Changing........
libguestfs tools howto guide for managing virtual machine images.
libguestfs-tools aka guestfs tools has a lot of tools that make this very easy for you. You can easily mount partitons from an image with some of the commands below.
To mount a partition
#mount the kvmuser102821.img image and the /dev/sda1 partition from it to the local directory "mount"
guestmount -a kvmuser102821.img -m /dev/sda1 mount
........
You need to use the Samsung driver but specify it as a CLP-360 (this is what I used for my CLP365) and incidentally most of these units look identical on the outside on inside (I've been buying whatever the latest C300 and now 400 unit for years which all seem the same with slightly different features that I never use).
The solution
Once again try specifying earlier models and revisions if the printer doesn't print (it will say it's been sent to the printer bu........
i337 Canada on Bell is hard to root or even install TWRP
Installed TWRP from Odin and my computer gave me the bluescreen at the end but it seemed to be successful (after ODIN said reset).
TWRP mode does not seem to enter, instead you get the Android recovery mode with Volume up + Home
http://galaxys4root.com/galaxy-s4-root/how-to-root-att-or-verizon-galaxy-s4-on-android-4-4-2/
1.)........
This is very annoying and also hard for web developers who want to see how things look on Android. You may be fooled into thinking you have an unclosed bracket or incompatible code but this is the "text inflation feature" which I feel should be disabled by default. It works so inconsitently that one block of text will appear small while the other will be huge and is quite annoying.
The solution is simple
Settings ->Display and &q........
First of all if you're getting this error it is a result of extreme database activity. If you aren't expecting it or it doesn't make sense to you 99% of the time this is a database driven script being exploited (some common examples I see often are things like phpBB being hit by dozens, hundreds or thousands of bots making constant DB write requests).
The easiest way to identify this is to restart MySQL and then run the third party tool "mtop" and you'll see all........
iptables -t nat -A PREROUTING -p tcp -m tcp -d 192.168.2.1/32 --dport 3389 -j DNAT --to-destination 192.168.5.2:3389
iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
The above is often because you don't have the correct modules loaded on the hostnode or enabled for the container but in some cases it's actually a weird openvz setting.
Che........
Aug 25 16:43:24 evohostingtor postfix/master[19471]: fatal: /etc/postfix/master.cf: line 24: field "unprivileged": bad value: "???"
Solution: I had the wrong thick dashes when c&ping (just retype them with your keyboard)
Aug 25 16:47:10 mailbox postfix/master[24498]: fatal: /etc/postfix/master.cf: line 25: bad transport type: syslog_name=postfix/auth-cleanup
auth-cleanup unix n - - - 0 cleanup
#-o syslog_name=postfix/........
The most common solution is to use the /etc/postfix/header_checks but this is a big problem.
Why is header_checks a problem? Because it does it to all mail whether incoming or outgoing and whether authenticated or not. We of course want as much header information for incoming as we can get for many reasons but many organizations want to secure and make their mail clients as secure as possible.
I adapted this solution to the client's custom config, they are configur........
It really seems that 4.4.4 is not ready or stable for the i717 yet and this makes sense since it takes a lot of work/development and testing to get the factory stock ROMs working well. In the end I used the 4.1.2 based Blackstra BlackJelly because it was fast, stable and just works and feels great. The aftermarket support is great but many devs are focussed on adding features and customization that most of us don't want or need rather than getting things smooth and stable.........
Unable to mount iPad 4
Unhandled Lockdown error (-4)
This is because you need the libimobiledevice-utils package installed and a newer version of it.
My older Ubuntu 10.10 uses a version that does not have "idevicepair" which seems to work perfectly and automatically with newer versions of the library.
Basically if you install the above library it should be plug and play and if your imobiledevice-utils doesn't have 'idevice........
There is a weird quirk with how this works, but there is a variable called "src" that defaults to 0 or disabled if not specified as 1.
The default 0 means not to recur billing on a subscription. It's too bad it's not more obvious anywhere nor is there an explanation or warning during payment or after to both the seller and buyer.
Here's a proper subscription code example that does recur and does not cancel........
I struggled with this for awhile because sometimes you have rewritten URLs that you want to pass a query string but most of the info and examples do not support this.
Take a typical example like this:
RewriteRule ^(.*)-(.*)-(.*) /?module=$3&id=$2
You need to add the QSA flag to make it work like below:
RewriteRule ^(.*)-(.*)-(.*) /?module=$3&id=$2 [QSA]
The QSA preserves the original query string but also appends it wit........
It's just a simple plugin that you get from here.
After that you can stopped having a barrage of annoying e-mails from WP:)........
https://www.2checkout.com/documentation/notifications/order-created
It shows all the parameters that get passed so you can make a simple script to process it.
To enable 2CONotifications you need to do the following:
Login
Browse to the top right to an icon that looks like a "circle with horizontal lines inside" - Notifications.
Enter the appropriate URL for your IPN/Notification processing script (........
It was hard to find this as I find most online payment processors don't just put the basic information in plain view.
Remember to set your sid (your seller id). The below can easily be turned into a scripted PHP template to integrate into your own custom or existing payment solution.
http://help.2checkout.com/articles/How_to/How-to-Sell-Recurring-Products-with-2Checkout/........
This error seems to happen randomly and especially when trying to send e-mails. Apparently it's a long-standing GNome bug but is also partially the default of Thunderbird depending on who you ask. There is no known fix that I'm aware of except to upgrade gnome and the gvfs package but this is not an option for older versions/distributions.
An error occurred while loading or saving configuration information for thunderbird. Some of your configuration settings may not........
CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting. I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts.
So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........
I've only ever seen this in Ubuntu for some reason and it is because of the /etc/nsswitch.conf settings.
So the issue is that if the hostname's reverse DNS cannot be found that you need to go back to DNS which was not the default in this nsswitch.conf file for some strange reason.
Edit /etc/nsswitch.conf and replace your "hosts" line with this:
#hosts: files dns mdns4_minimal [NOTFOUND=return] mdns........
Error: Unable to restore run data (10)
Error: Unable to restore run data (11)
Ikeep getting this error but so far there is no obvious solution. Sometimes I've had to remove the *.hist files so I'll try that again.
*Update
This is an ongoing random problem after months of running webalizer it runs into some problem that can only be fixed by removing the following files so it can rebuild the stats (you end up losing p........
This is still a weird quirk about phpBB, you can allow everyone+guests to see a forum.
What also controls the first layer is this weird built-in "Anonymous" account. You have to actually give that account specific rights to view all the forums or otherwise the above will happen and you'll wonder why your group permissions don't seem to apply.........
Many may ask why would you need to do this? When upgrading from phpBB 2 to 3 the conversion does not keep the admin user you create. If your old admin user has an email address associated that no longer works or is accessible this makes it impossible to reset the admin password.
Some may just say "I'll just manually edit the e-mail address" but it won't work and phpBB will fail to find that user if you don't update the "user_email_hash" field but how do........
-A PREROUTING -d 98.98.98.5/32 -p tcp -m tcp --dport 1050 -j DNAT --to-destination 192.168.1.50:3389
The above forwards port 1050 on IP98.98.98.5 to 192.168.1.50 port 3389 (you can obviously edit things to meet your needs).........
error: Failed to create domain from /home/kvm/kvm101/kvm101.xml
error: cannot open file '/dev//dev/kvmcontainer/kvm101_img': No such file or directory
This is caused by what we consider a quark in SolusVMthat Ihelped a client with.
SolusVMhas as config for the "LVMvolume name" and does not enforce any convention.
Naturally most technical people would use the actual path eg "/dev/kvmcontainer".
However th........
drbd 8.3 hard drive failure recovery
drbdadm attach r0
DRBD module version: 8.3.10
userland version: 8.3.8
you should upgrade your drbd tools!
0: Failure: (119) No valid meta-data signature found.
==> Use 'drbdadm create-md res' to initialize meta-data area. ........
To first start off, there are many misconceptions about NoSQL and especially its strengths and weaknesses.
Even the popular NoSQL solution MongoDB is fraught with issues that no one seems to be concerned about aside from a few but there are serious issues with database integrity and verified writes. MySQL was considered dangerous or incomplete at one point without having the transactional safety features of Oracle for example.
However the NoSQLimplementations seem........
After the "latest" update one of our clients asked us to figure out the issue and it turns out it is related to the mail settings.
Basically all e-mails were being sent with blank text/no body.
The solution
Go to "Setup ->General Settings ->Mail" and just click on "Save" and it will work again.
Note that this assumes you didn't break things yourself by changing any settings. WHMCS may tell y........
Press F2, you wouldn't know this because like most new computers, it doesn't announce the required key unless you enable it from the BIOS.
........
This is what fixed it:
[root@box13 ~]# dd if=/dev/zero of=/dev/md160 bs=512 count=500
Basically you need to wipe out more than just the 512 byte partition table so 512 bytes * 500 is more than enough to make DRBD happy and think the partition is now empty.
The reason this happens is because it gets confused when there is a previous partition with data on the device you are using.
root@box13 ~]# d........
Apr 17 11:55:47 Cluster01 heartbeat: [1426]: WARN: ha_msg_add_nv_depth: line doesn't contain '='
Apr 17 11:55:47 Cluster01 heartbeat: [1426]: info: >>>
Apr 17 11:55:47 Cluster01 heartbeat: [1426]: ERROR: NV failure (msgfromsteam): [>>>
]
I have never been able to reproduce the above but it happened on heartbeat-3.04-2 when Itook a node down for testing.
One thing Ibelieve caused it was by configuring ha.cf........
I used the matching 8.3.13 utilities and it didn't work but strangely the newer 8.3.16 which makes DRBD complain works just fine.
GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51
0: cs:SyncSource ro:Secondary/Primary ds:UpToDate/Inconsistent A r-----
ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5236960
&am........
ERROR: make_io_childpair: cannot open ucast br0
You cannot specify ucast br0 without an IP address associated with it.........
(echo n; echo p; echo 1; echo 1; echo; echo wq) | fdisk /dev/sdb
The above would make a new partition 1 on /dev/sdb and save the changes to disk, you can of course make changes to do almost anything in fdisk.........
OpenVZ has made vzctl version 4.7 default to using ploop which is a big annoyance. No one wants it otherwise we'd use Xen or KVM.
Make sure to manually specify vzctl 4.6.1 or you will have issues with old scripts breaking since it defaults to using ploop (a single image like Xen/KVM).
Here's a list to old versions of vzctl.........
# first we need a physical volume which we use the pvcreate tool to create
# I create mine on /dev/sdb3
pvcreate /dev/sdb3
dev_is_mpath: failed to get device for 8:19
Physical volume "/dev/sdb3" successfully created
# pvdisplay shows the newly created volume
pvdisplay
"/dev/sdb3" is a new physical volume of "1.35 TiB"
--- NEW Physical volume ---
PV N........
#count=10000 makes an image of 10000MB make sure your image is at least the same as your existing
dd if=/dev/zero of=yourimage.img bs=1M count=10000
# losetup -fv newimage.raw
# fdisk -cu /dev/loop0
# kpartx -a /dev/loop0
# dd if= of=/dev/mapper/loop0p1
# e2fsck -f /dev/mapper/loop0p1
# resize2fs /dev/mapper/loop0p1
# a lot of guides tell you to edit /etc/fst........
yum -y install mathtools
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: centos.mirror.rafal.ca
* epel: mirror.steadfast.net
* extras: mirror.agmn.ca
* rpmforge: repoforge.mirror.constant.com
* updates: centosb5.centos.org
extras ........
On primary node
drbdadm connect all
On secondary node
drbdadm -- --discard-my-data connect all
........
fdisk unfortunately can't do this and I'm not sure if there's any updated version that handles it but parted can do it.
Here's an example of how to do it:
parted /dev/sda print
1 17.4kB 1024MB 1024MB ntfs primary
2 1024MB 16144MB 15120MB ntfs primary
/dev/sda1 would be the first partiton
/dev/sda2 would be the second partition
You can then just access them like any other normal partition.........
Start -> Administrative Tools ->Server Manager
Under "Computer Information" click "Configure Remote Desktop".
Under "System Properties" choose the type of "Allow connections" you want.
That's all there is to enabling RDP Access in 2008 server.........
http://realtechtalk.com/downloads/virtio-win-0.1-74.iso
Current Direct stable URL from Fedora: https://fedoraproject.org/wiki/Windows_Virtio_Drivers
Direct Downoad of Stable Virtio: https://fedorap........
This problem seemed to happen recently but was likely causing issues before where the phone(s) do not ring.
Now there are a few reasons why this can happen especially if your adapter has DND mode enabled (disable it).
However that wasn't my issue and Ionly figured it out the other day when by fluke if you're on the phone (making a call) then calls will come in.
That's when Ifigured out the solution:
This likely app........
./configure
./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory
Error: kernel version not found.
Please make sure your kernel is configured.
dr-xr-xr-x. 4 root root 4096 Feb 21 06:13 ..
lrwxrwxrwx 1 root root 45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25
drwxr-xr-x 2 root root 4096 Feb 12 20........
This seems to mainly affect new installs of Windows and especially on XP randomly.
There are whole pages dedicated to the subject but none of them have a simple proper solution.
They and Microsoft say to use "Microsoft Fix It", the only problem is it requires .NET and many new installs of Windows don't have it by default.
The simple solution you asked for
Just reboot Windows and that is how Ifixed it.........
http://deepxw.blogspot.ca/search/label/Universal%20Termsrv.dll%20Patch
The above site has the patch that does this essentialy turning a Desktop Windows into a full fledged RDP server.........
This can happen when you install RPMForge or other repos with the wrong architecture and here's how you fix it (simply uninstalling won't usually fix it):
solution
yum clean all
yum -y install openvpn
Loaded plugins: fastestmirror, presto
Loading mirror speeds from cached hostfile
* base: mirror.its.sfu.ca
* extras: centos.mirror.nexicom.net
* rpmforge: mirror.cpsc.ucalgary.ca
* up........
nf_conntrack: table full, dropping packet
The above in some cases I've seen is a sign of a DOS attack or can occur if users are using services like torrenting, proxy, VPNetc... Do not take it lightly as the above can knock a server offline if the table becomes full and I've also seen full crashes and kernel panics shortly after.
........
kernel:[735188.961824] Kernel panic - not syncing: Fatal exception in interrupt
Write failed: Broken pipe
I'm not sure what is causing this and have never seen it on any server before.........
root@hkhosting [/]# service httpd start
Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf:
Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration
........
It's not as simple as "yum install" as you can see below and it doesn't stop there.
yum install php53
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: mirror.us.leaseweb.net
* extras: centos.mirror.rafal.ca
* updates: centos.mirror.nexicom.net
* base: centos.mirror.nexicom.net
* addons: centos.mirror.nexicom.net
Setting up Install Process........
I was worried the server was hacked, I was logged in already as root but couldn't login to CPanel or a new SSHsession. I even reset the password from the shell and it did not work still.
The reason is CPanel Hulk, it detected a brute-force attack so it locked down the root account entirely even from the correct password. According to cPanel the best way around this is to whitelist your IP.........
There was an error creating the child process for this terminal
Failed to create pipe for communicating with child process (Too many open files)
I get this when trying to open a new tab or new window even. I've had far more sessions open (literally dozens)before without getting this error.........
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (720x1280 fourcc=34504d46 [FMP4])
[mpeg4 @ 0x2c91c00] timebase not supported by mpeg 4 standard
Could not open codec.
FATAL: Cannot initialize video driver.
That is the error I would get, I thought it was a codec error something else. By fluke Isaw something about ffmpeg where someone recommended manually telling it to the "fps" and it worked.........
[3805108.257042] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[3805108.257052] sd 0:0:0:0: [sda] Write Protect is off
[3805108.257054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[3805108.257066] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[3805108.257083] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[3805108.257090] sd 0:0:0:0: [sda] Write Protect is off........
I was having an issue with only certain random/jpeg files with the functions imagecreatefromjpeg imagecreatetruecolor and other related ones.
This issue was annoying basically it seems like a libgd issue/bug with newer versions of PHP and it was difficult to trace-out. One very useful thing that helped me was using "php-cgi" and passing the query string as an argument eg:
php-cgi images.php source=IMG.jpg (that way you get all the error messages wh........
-A PREROUTING -p tcp -m multiport --dports 10000,18080,13306 -j DNAT --to-destination 192.168.5.83........
This server has been running for weeks without issue, it's currently only using 1 of 2 CPUs as it is running in the office as a test bed (mainly due to the handle 12 bay storage/great for testing HDDs). The errors below seem to mainly be from AMD CPUs, it's only happened a single time and in the days since Igot that error it hasn't occurrred.
Interestingly enough /proc/cpuinfo still shows all 4 cores of the CPU (Opteron 2373 Quadcore HE) and the functionality doesn't seem........
Go to:
"Server Configuration" -> Basic cPanel & WHM Setup
Scroll to: "Nameservers" (at the bottom)
From there you can set the names of the nameserver and their IPs.
It's very weird and confusing that nothing under IP Functions/DNS has or links to this.........
Idon't know why but some installations don't have this in the database by default.
To fix it to an:
sudo apt-get update;sudo apt-get install openssh-server
and then it will work........
yum -y install fail2ban
vi /etc/fail2ban/jail.conf
[asterisk-tcp]
enabled = true
filter = asterisk
action = iptables-multiport[name=asterisk-tcp, port="5060,5061", protocol=tcp]
sendmail-whois[name=Asterisk, dest=you@example.com, sender=fail2ban@example.com]
logpath = /var/log/asterisk/messages
maxret........
service monit status
monit dead but subsys locked
........
All Errors (CPanel does not report by domain, but puts everything in a single log which Ithink is a bit silly and annoying):
/usr/local/apache/logs/error_log
Access_Logs
They are found within the home directory of the site user eg.:
/home/admin/access-logs/yoursite.com
MySQL Logs
/var/lib/mysql/yourhostname.err........
Dell CS24-NV7
Unusually the Virtualization was enabled when I got this server but all the NICs were diabled in the BIOS including PXE boot!
Advanced -> Advanced Chipset Control
PCI Slot 1 Option ROM: Enabled
Onboard LAN1 Control: Enabled
LAN1 Option ROM Scan: Enabled (you need it for PXE boot)
Onboard LAN2 Control: Enabled
LAN2 Option ROM Scan: Enabled
*you will need to reboot and........
When manually running it for some reason it decided to ask for/use the CD as a source whichInever set.
Disabling the CD as a source stops this from happening, otherwise apt-get will keep respawning and use 100% CPU.........
VBox/Virtualbox solution to NS_ERROR_CALL_FAILED error
This is likely because you have 2D/3D acceleration enabled and your card doesn't support it.
Eg. you switched video card drivers or video cards that did support it.
The funny thing is that you CANNOT disable those options as they are "greyed" out in the VBox client GUI.
The config file has to be manually changed and fixed with these options "accelerate3D="false" accelera........
Visit that link
http://yourforums.com/forum/register.php?do=requestemail
Or in AdminCPit can be done.........
This happened after a customer migrated their hosting and the issue was being unable to access PHP sessions.
Warning: session_start(): open(/var/lib/php/session/sess_3e0oms763m6mrqekdnnmodlhs3, O_RDWR) failed: Permission denied (13) in /register.php(202) : eval()'d code on line 1
Solution:(use the correct ownership/permissions)
chown apache.apache -R /var/lib/php........
./configure
./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc
yum -y install gcc make
./configure
./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc
yum -y install compat-gcc-*
./configure
Error: Could not find alsa
Make sure to have the alsa libs and headers installed.
yum -y install alsa-lib-devel
./configure........
sudo mount -o user /dev/sr0 cd
You need the "user"option otherwise non-root or non-owners cannot view the CD and this would make it so no anonymous access to the CD/DVD mount would work. Note that most distributions including Ubuntu DONOT work unless you manually mount and share as shown above (Icouldn't find any other way in Ubuntu).........
On the same OS with the same kernels basically I cannot boot FreeBSD installer, I believe the issue is the host CPU.
One host runs an Intel and works, while an Opteron 2373 does not work despite suggestions from this thread: http://149.20.54.209/showthread.php?t=36761
I've tried cpu options like "kvm64" "Opteron_G3" and none........
wget --accept "*.pdf" -r http://somewebsite/page........
This happens because of a permissions or ownership issue.
Generally /var/lib/mysql should be all owned by mysql.mysql (check that).
To fix it use chown -R mysql.mysql /var/lib/mysql
Also make sure the files are at least readable and writable by mysql (eg. 700).........
mount -o bind /proc /sda2/proc
mount -o bind /dev/ /sda2/dev
mount -o bind /sys /sda2/sys
chroot /sda2
mint / # mount -o bind /proc /sda2/proc
mint / # mount -o bind /dev/ /sda2/dev
mint / # mount -o bind /sys /sda2/sys
mint / # chroot /sda2
mint / # cd ~
mint ~ # ls
Desktop
mint ~ # cd /
mint / # ls
bin Desktop dev-temp home&nb........
Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux
even setting privvmpages to a specific setting DOES not affect "free -m" in containers.
This is probably a kernel issue
23:36:29 up 159 days, 7:12, 4 users, load average: 0.42, 0.44, 0.33
[root@box13 ~]# free -m
total&n........
./rsync.sh
sudo: sorry, you must have a tty to run sudo
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7]
Solution edit
/etc/sudoers
#Defaults requiretty........
Sipura / Linksys PAP/VOIP/SIP Adapter Issue
Can't receiving incoming phone calls and you're behind a NAT router (99% of people)?
1. Login to the adapter.
2. Click on "Advanced" (location varies but usually somewhere on top)
2. Click on "SIP"
3. Scroll down to "NAT" (usually at the bottom).
You'll find 2 columns with 4 rows of drop-down boxes (they'........
This was caused by some weird dmraid setup which kind of takes control of drives even if they're blank/unused.
1. Check the table.
dmsetup table
ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172: 0 3905945600 linear 8:0 0
ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172p3: 0 37124096 linear 253:0 284547072
ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172p2: 0 283496448 linear 253:0 1050624
ddf1_44656c6c2020202010........
tar -czf yourfile.tar.gz .
The . dot is the crucial part, normally many will use * and that will exclude hidden files by default which is very undesirable as many hidden files are important such as .htaccess and conf files in your home directory etc.. It seems the default behavior of tar should be the opposite but these are all very old tools.........
This is a great way to upgrade your RAID array or move it/copy it to a new set of hard drives.
Eg. you have a current RAID 1 array on older/slower drives.
Just add at least 1 of the new drives to the array, update grub/install it and then boot into it. Then you have a transparent data migration that is fully synchronized.
mdadm --grow /dev/md126 --raid-devices 3
md127 : active raid1 sdc1........
The units in echo are kB as in kilobyte.
Setting a high sync speed
echo 120000 >/proc/sys/dev/raid/speed_limit_min
This will increase the speed, note that sometimes a rebuild is slow due to current disk activity/iowait.
If that is not the cause then you may have a hardware issue (controller, cable or a bad drive).
Setting a lower sync speed
echo 1200 >/proc/sys/dev/raid/speed_limit_max........
02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
Basically these cards are a stripped-down version of Dell Perc 6/i only they (SAS 6/ir) support JBOD.
The DellPerc 6/i are basically useless because it doesn't have JBOD support and requires software or BIOS commands to add or remove........
Iread this article and still don't understand the issue.
If I understand correctly the client negotiates after the first SSLconnection and then gets the correct hostname and thus correct certificate.
http://wiki.apache.org/httpd/NameBasedSSLVHostsWithSNI
To their credit I know I'm not using SNIbecuase Iget this message in the Apache log :)
[warn] Init: You should not use name-based virtual hosts in conjunction with SSL!!
B........
service mysqld start
MySQL Daemon failed to start.
Starting mysqld: [FAILED]
mysqld_safe
cat /var/lib/mysql/server.err
130917 17:57:09 InnoDB: Started; log sequence number 0 0
13091........
This example involves an Aterisk message log of about 26GB, but with any server it usually does not get deleted until the server is stopped/restarted:
asterisk 13729 root 6w REG 0,41 27277943090 59097971 (deleted) /var/log/asterisk/messages
So if you've deleted a bunch of large logs, make sure you restart the server for them to regain your space.
........
/scripts/phpextensionmgr install PHPSuHosin
Updating md5sum list
Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)...
Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........
This is usually solved by two variables alone:
max_input_vars=5000
memory_limit=256M
Now you should be able to have unlimited amounts of custom menus in Wordpress.........
Istruggled with this for awhile because the normal setup won't work if modrewrite is being used:
ORDER ALLOW, DENY
So the solution is something like this:
order allow,deny
deny from 12.43.12.0/24
allow from all
........
The first is a dual CPU AMD Opteron 2373EE (4 cores x 2) and I think it did bad because it has some old 250GB SATAs which can only do about 65MB/s max sequential reads. I think it should have blown away the second (AMD X4 640 Quad Core).
[root@fs12home unixbench-4.1.0-wht-2]# ./Run
make all
make[1]: Entering directory `/root/unixbench-4.1.0-wht-2'
Checking distribution of files
./pgms exists
./src exists........
I just realized I have some blank users which I deleted butI can still login to this dummy account without a password for some reason.
mysql -u -p
Welcome to the MySQL monitor. Commands end with ; or g.
Your MySQL connection id is 5
Server version: 5.1.69 Source distribution
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation an........
I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards.
My particular model came with the following:
2U Rack Mount Server with Rails
2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times)
16GB RAM
2 x 250GB Seagate SATA
2 x Dell Perc 6/i (horrible and a nightmare to work........
The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results.
This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane.
Adapter #0
Enclosure Device ID: 32
Slot Number: 0
Enclosure position: N/A
De........
I bricked one of my cards by following a guide from UNRAID.
Step #1 from them wipes out the BIOS, but guess what? The step where you restore the BIOS should have been done first, which is sas2flash but no version supports or is able to find my Perc 6/i. So now I'm a bit stuck.
I tried using megarec but it's funny that it can wipe the BIOS but can't forcefully reload it:
megarec -writesbr 0 mpt2sas.rom
Supports 1078 control........
One thing to remember is that you need MegaCli to do the flashing.
You also need the correct file,I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli(they were really the wrong version). I have an external PCI-E Dell 6 Perc/I butI chose images from the 'Integrated" on motherboard version as it was allI could find. They are different, and below is my first time finding success.........
I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally.
I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli
wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN
--2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN
Resolvi........
It is stored in the "configuration.php" file of all places which is annoying andI get questons like this at worke each day.........
LSi Megaraid
At first it was configured as a RAID 0, then I deleted the Virtual Disk Group.
I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing.
To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
cp -L index.php index.php-2013-08-21
The -L switch is what you need because it's a huge issue if you think you've copied a file for backup purposes but it really just creates a symlink to the original file.........
The Cause
Basically it's usually because your Cpanel has new IPs and the old IPs it knows are no longer available/working/valid.
The solution is to change the site's IP but you may run into issues for various reasons. Here is what I encountered below.
It redirects there even though public_html is empty and doesn't have any index or htaccess redirect.
---
This issue happened after a CPanel migration, the site is bein........
yum update error
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py", line 229, in user_main
errcode = main(args)
File "/usr/share/yum-cli/yummain.py", line 145, in main
(result, resultmsgs) = base.buildTransaction()
&nbs........
The solution is strange but simple and works each time on Centos:
yum downgrade libtorrent........
open /dev/kvm: No such file or directory
failed to initialize KVM: Operation not permitted
[ 96.084502] kvm: disabled by bios
Any of the above means that "Virtualization" is not enabled in your BIOS. Most servers and Desktops (non-mainstream) can do this no problem but leave it off by default. Note that some systems even though the CPU supports it, don't allow enabling of Virtualization for some reason (especially some lap........
This happens all the time, you are reading from a textfile which has spaces eg:
datainfo 00
datainfo 11
If you do loop on it like this:
for info in `cat $file`; do
echo "info=$info"
done
It will treat datainfo and 00 as two separate lines:
info=datainfo
info=00
Obviously that's not what we want and there are many weird solutions in bash bu........
package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture
Linux etc 2.6.18-274.7.1.el5xen #1 SMP Thu Oct 20 17:06:34 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
As you can see above architecture and kernel is 64-bit but I had to force it to install using "--ignorearch"
Solution
#rpm --ignorearch -ivh kernel-xen-2.6.18-274.7.1.el5.x86_64.rpm
Preparing...&nb........
mkdir: cannot create directory 'test': Disk quota exceeded
You are out of inodes usually:
df -i
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/simfs 200000 200000 0 100% /
none ........
This is important if you need public access to internal IPs such as at your office and don't want to use a VPN just to SSHinto different servers:
Below forwards the port "10001" to the IP192.200.5.53 on port 22 (of course adjust it to your needs).
iptables -t nat -A PREROUTING -p tcp --dport 10001 -j DNAT --to-destination 192.200.5.53:22
Remember to enable MASQUERADE on your NAT IPs or they won't be able to talk to the outside world (........
Use imagemagick:
convert -density 200 file.pdf file.jpg
Increase the "density" value to get a higher resolution/larger file an decrease it to go smaller.
This is really the quickest and simplest way.
Some issues you may have:
http://realtechtalk.com/ImageMagick_Convert_PDF_Not_Authorized-2217-article........
dialplan reload
It's really that simple, though some say "extensions reload" but it doesn't work for me, perhaps it depends on the version of Asterisk.........
This is a great way to test and experiment without risking your current table, or to make a backup of your current table to avoid corruption or dataloss due to malicious activity eg. deletion etc..
There are two steps and two commands
1.)Copy Table Structure
"cars_backup" is the new table and it will be a copy of the table called "cars"........
SELECT column_name
FROM information_schema.columns
W........
Another new drive bad from the start:
Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error
Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........
Container is currently mounted (umount first)
The container is stuck in the "mounted" state, you must manually start it to get it out of that state (there is no umount option as implied by OpenVZ vzctl).........
ffmpeg -vcodec copy -i 20130526_195809.mp4 -an 20130526_195809-noaudio.mp4
Withotu the -vcodec copy I got this error (so make sure you use the vcodec copy switch): Error while opening encoder for output stream #0.0 - maybe incorrect parameters such as bit_rate, rate, width or height
........
This happened to a customer Asterisk server and it somehow found the ID of the registration account to the upstream SIP server and was railing connection attempts (it filled up the console and there were literally thousands per second). Basically this caused all incoming and outgoing calls to fail.
It was a temporary fix but the solution was to block that specific IP, it's hard to stop it 100% because the customer needs the default SIP port.........
I'm using ecryptfs and was suddenly unable to access or even ls my home directory (but every subfolder is accessible). It just hangs and throws this message in messages/dmesg:
Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO
I read somewhere that perhaps some file or folder is owned by root somehow, sure enough there are some and sudoing to root allows me to........
This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad.
ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:00:........
This is the most I can get when plugging in a hard drive hot and only on some power connectors.
[71656.314271] ata5: exception Emask 0x50 SAct 0x0 SErr 0x90a02 action 0xe frozen
[71656.314277] ata5: irq_stat 0x00400000, PHY RDY changed
[71656.314285] ata5: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B }
[71656.314294] ata5: hard resetting link
[71660.360686] ata5: softreset failed (device not ready)
[71660.360694] ata5: applying........
Once I set a new MAC address everything was fine and finally anything can be pinged etc.., I've had this happen with many clients in different datacenters on different hardware.........
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
user=mysql
# Disabling symbolic-links is recommended to prevent assorted security risks
symbolic-links=0
bind-address=127.0.0.1
The key is "bind-address", set that to 127.0.0.1 and no one from outside the server can connect.........
mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142)
One of my clients almost found out the hard way, here is an unlikely situation that happened.
1.) Years ago the client had another VPS to which they backed up a BLOG nightly to an .sql file, what they forgot is that the file also contained all databases (they used the --all-databases option but forgot). So imagi........
foreach ($_POST as $key => $value) {
if ( $key != submit )
{
$values.="$key=$value<........
This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others:
Choose CountryCanadaJapanUnited StatesUnited KingdomAfghanistan........
I find it very annoying that this mouse has buttons on the side where you grip it and the left one goes back in the browser and the right one goes forward. Imagine if you're filling out a form and hit it, most forms/websites have no protection against it.
Source: http://ubuntuforums.org/showthread.php?t=2065400
Here's how I fixed it with xinput, it's too bad there's no good standard GUI to........
On occassion and from a variety of networks and clients, Sent messages don't get saved.
I'm wondering if these log messages could be why:
May 3 14:16:39 mail.box postfix/smtpd[5195]: connect from 192.168.1.58
May 3 14:16:39 mail.box postfix/smtpd[5195]: SSL_accept error from 192.168.1.58: -1
May 3 14:16:39 mail.box postfix/smtpd[5195]: lost connection after CONNECT from 192.168.1.58
May 3 14:16:39 mail.box postfix/smtpd[5195]:........
If you move your hard drive(s) around to other computers/servers, you'll find that your eth0 keeps getting higher, the first time it will become eth1 and then eth2 etc and even higher if your server has dual or quad NICs. The reason is that udevd basically assigns eth0 tot he first NIC it finds and remembers it, if it encounters a NIC with a differentMAC, it assigns it one higher (eg. eth1).
See the example below, I have eth2 now so how doI fix it?........
Client Log
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 192.168.1.253 [192.168.1.253] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type 1
debug1: identity file /root/.ssh/id_d........
This is a handy link and list of all the relevant Directadmin log files and related servers.
http://help.directadmin.com/item.php?id=11
DirectAdmin:
/var/log/directadmin/error.log
/var/log/directadmin/errortaskq.log
/var/log/directadmin/system.log
/var/log/directadmin/security.log
Apache:........
vzquota : (warning) block_hard_limit [102] < block_current_usage [520824]
This is because your disk usage of the container exceeds the quota.
Eg. once on a test container I had accidentally set it to 32MB yet the OS took about 600MB.
Just set the quota to something bigger than the currently used space to solve it.
vzctl set 3891 --diskspace 5G:5G --save........
Solution To The Following:
yum -y install zlib-devel
yum -y install e2fsprogs*
*** Cannot find /usr/include/et/com_err.h. (yum install libcom_err-devel) ***
Installation didn't pass, halting install.
Once requirements are met, run the following to continue the install:
cd /usr/local/directadmin/scripts
./install.sh
Common pre-install commands:
http://help.directadmin.com/it........
Here's the link to the warranty checker and from there you can also create an RMA:
https://myapps.taec.toshiba.com/myapps/admin/jsp/webrma/addRequest1NoLogin.jsp
Note that the serial# shown in SMART is not complete as is the case for many other brand sof HDDs.
For example a 2TB Toshiba shows the following Serial Number in SMART:
Device Model:........
I chose this because I heard a lot of stories about scams and that many providers I contacted said they can't unlock the Canadian I717s (one said "my Bell server" is down).
This method worked perfectly on my Bell I717M and should work for all I717 in Canada, I was able to insert a foreign SIMcard. This will work abroad too but remember entering CWM mode is different for I717's in other countries (at least theUS).
Step 1 - Root + CWM........
Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........
Here's what SMART tells me the serial number is:
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HDS721010CLA332
Serial Number: JP2940HQ3ZY7KH
Firmware Version: JP4OA3EA
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is:&nb........
This was partitioned as a single 32GB VFAT but when I inserted it into the phone it said that it can't read it and now here is how the partition table looks. Interestingly enough the data works and reads fine from the computer still.
Disk /dev/sdb1: 32.1 GB, 32085360640 bytes
64 heads, 32 sectors/track, 30598 cylinders, total 62666720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum........
Failed to open a session for the virtual machine XP.
Failed to launch Remote Desktop Extension server (Unknown Status 0x80004005).
Disabled remote display:
Failed to load VMMR0.r0 (VERR_SUPLIB_OWNER_NOT_ROOT).
solution
chown root.root /usr/lib/........
Install unoconv
unoconv -d document -f pdf file.doc
Change "file.doc" to the name of your document. Note you could specify *.doc and it will convert all .doc's in the current directory to pdf which is very handy.
unoconv uses the cli from OpenOffice to do this, OpenOffice actually doesn't have an easy way I've found of doing this despite it having the functionality.
........
This pops up when connecting the phone and it doesn't seem to charge. The phone keeps showing a status message every few seconds "Connected as a media device".
It's ridiculous why this phone doesn't just default as a simple USB Mass storage device.
Here's what I see in /var/log/messages:
Jan 30 18:51:27 QuadCoreAM2 kernel: [18038228.144046] usb 1-3: new high speed USB device using ehci_hcd and address 24
Jan 30 18:51:28 QuadCoreAM2 ke........
Tools -> Options -> OpenOffice Writer -> Table
Uncheck "Number Recognition"
This will permanently disable it but won't undo the damage it has already done. I spent a long-time fighting with this horrible feature which should be disabled by default.........
sensors|head
i5k_amb-isa-0000
Adapter: ISA adapter
Ch. 0 DIMM 0:+115.0C (low = +127.5C, high = +127.5C)
Ch. 0 DIMM 1: +63.5C (low = +127.5C, high = +127.5C)
Ch. 0 DIMM 2: +61.0C (low = +127.5C, high = +127.5C)
Ch. 1 DIMM 0: +65.0C (low = +127.5C, high = +127.5C)
Ch. 1 DIMM 1: +75.0C&........
cat | grub --device-map=/dev/null
Now pay close to the attention of the beginning.
Type: "device (hd0) VPS.img" this is telling what hd0 will be to GRUB and we're telling it the disk image file "VPS.img" in the current directory is hd0, you can specify alternate paths and image names of course.
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-li........
This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel.
I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk.
I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one).
This is strange but it seems like this Xen PV guest has some sort of hidden or........
I closed program by program untilI found the culprit, it's baffling how the cause was Thunderbird but then again it does use a lot of memory and I have thousands of messages between dozens of mailboxes.
But still I don't think this should happen and Xorg shouldn't allow this either.
So for those who have mysteriously high CPUusage from Xorg start closing program by program until you find the culprit.
The interesting thing is that after reloading it, the Xor........
No one needs this feature for the most part, so here's what I added to /etc/dhcpd.conf to fix it:
ddns-update-style none;........
Cannot load certificate file keys/server.crt: error:0906D06C:PEM
The .crt is blank empty because when generating it I kept hitting enter for the defaults and this caused the crt not to be signed.
Certificate is to be certified until Dec 18 00:35:49 2022 GMT (3650 days)
Sign the certificate? [y/n]:y
1 out of 1 certificate requests certified, commit? [y/n]y
So if you get messages like these, a........
The example below converts youvm.img into a vdi.
The -O vdi specifies the new format will be vdi but you can use any other valid formats/vice versa.
qemu-img convert yourvm.img -O vdi yourvm.vdi
This is very handy for those who need to switch between virtualization technologies.........
Let's keep this simple, it's horrible, not only is the picture quality horrible (it's not a big deal) but the keyboard input is an issue. You have to type slowly, lightly and carefully otherwise 1-keystroke could end up being dozens of keystrokes.
It's also a confusing unit for many datacenter techs, I've seen these units hooked up wrong and the instructions themselves aren't clear. I had to resort to shipping one to my office and take my phone pictures of the setup for th........
I've run into two issues with Lantronix based KVMs on various servers and here's how I solved them (with that said I like these units as they are Java based and OS independent and work very well, unike some other models like Startech).
1.) If you are connected by USB only and you're sure USB support from the BIOS is enabled, you just need to click the following in Lantronix
Interfaces -> Keyboard/Mouse
Check "Force USB Full Speed Mode", this fixed the issu........
arp -a
syst (192.168.1.122) at 21:96:43:3a:62:a2 [ether] on eth0
arp -d 192.168.1.122
If you get an error do:
arp -d 192.168.1.122 -i eth0
Sometimes the arp cache just won't clear either, some say it should automatically but there are cases where the above doesn't work. I believe it may be that some network applications are keeping the entry alive but this is just a guess.........
Here is a quick script that works on most Centos versions to disable the virus/SELinux from blocking basic functionality.
The first echo 0 statement disables SELinux instantly but it will still be enabled on reboot.
The second line disables it permanently.
#!/bin/bash
#disable SELinux Immediately
echo 0 > /selinux/enforce
#disable SELinux Permanently
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config........
qemu-kvm-1.2.0]# ./configure
Disabling PIE due to missing toolchain support
glib-2.12 required to compile QEMU
Solution install glib2
*Don't confuse glib2 with glibc, they are different and it may catch some off guard.
yum -y install glib2*
After that KVM should compile and install just fine.........
This seems to be common for some reason when trying to run Windows 7 under KVM and 7 has always had strange issues with KVM. What happens for me is after the install it simply won't boot, it stays on the POST screen and does nothing.
For some reason it appears the boot sector either doesn't get installed or gets corrupted with KVM.
The solution is to boot the install disc for Windows 7 and reinstall the windows MBR into the boot sector:
1. Boot t........
qemu-img create -b centos.5-8.x86.20120308.qcow2 -f qcow2 ../kvmguests/25000-centos5.8x86.qcow2
Formatting '../kvmguests/25000-centos5.8x86.qcow2', fmt=qcow2, backing_file=centos.5-8.x86.20120308.qcow2, size=10485760 kB
-b the source/base image
-f format is qcow2 and the location of the destination image
What is so special about this? It's even quicker than creating a template with OpenVZ but this is an actual OS.
It saves time a........
mdadm --manage /dev/md1 --add /dev/sdb1
mdadm: metadata format 00.90 unknown, ignored.
mdadm: metadata format 00.90 unknown, ignored.
mdadm: metadata format 00.90 unknown, ignored.
mdadm: /dev/sdb1 not large enough to join array
md1's first primary member /dev/sda3 has 57394 cylinders while the /dev/sdb1 has 57393 (1 less cylinder) which is why it won't work.
fdisk -l /dev/sda3
Disk /dev/sda3: 47........
The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.5.3 Error: too many recipients.
We set this in main.cf:
smtpd_client_recipient_rate_limit=0
We didn't specify it before and the default is said to be 0/unlimited and it still didn't change anything.........
For whatever reason the current OpenVZ yum repo file enables the RHEL6 version of OpenVZ, why is this bad? Because if you're running Centos 5 it still defaults to using the kernel from RHEL6 which won't work on RHEL5/Centos 5.
Ionly realized this after wondering why I couldn't boot into OpenVZ that it was using one meant for RHEL6.
To fix the problem you have to edit /etc/yum.repos.d/openvz.repo and disable the "[openvz-kernel-rhel6]" section by changing........
ip tunnel add tun3 mode gre remote 192.58.1.5 ttl 64
ioctl: no such device
I solved this on Centos by loading the ip_gre module:
modprobe ip_gre
On Debian I believe it is the "sit" module.........
parted sdc.img
GNU Parted 1.8.8
Using /home/one/sdc.img
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) unit&nb........
When trying to delete a tunnel
ip tunnel del tunl0
I get this message:
ioctl: Operation not permitted........
ip_conntrack: table full, dropping packet.
A lot of clients I've seen have this issue, it really seems the default level is way too small. Once this connection tracking table becomes full then packets get dropped which is obviously a bad thing.
One thing to be mindful of though is that 350 bytes of memory are used per entry so there is some justification for not keeping it too high. However, if you have multiple servers running or high traffic daemons........
A lot of people become nervous (and understandably so) when checking their auth or security logs, in Centos /var/log/secure and see dozens, hundreds of even thousands of attempted logins to various services, especially SSH.
Of course you could manually block these people/IPs but no one has time to read the logs like that, what if some program or script could do it for you?
This is what denyhosts does for you, it checks the logs and based on a certain number of failed SSH attem........
I backed up everything in the /mnt/sd_card directory thinking that some dataloss could occur for some reason but purposely left my microSDHC unbacked up thinking that "it won't touch that since it's external" and Samsung's and other manufacturers website even say this (that it won't be affected and not to worry etc).
Apparently I was wrong, my microSD was "undetected" and asked to be formatted after the upgrade (there goes 3-months worth of family photos). No........
This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server).
You may need to upgrade to PHP5.3 to run Joomla or many other reasons.
Your host needs to use PHP 5.2.4 or higher to run this version of Jo........
ntpd[7047]: can't open /var/lib/ntp/drift.TEMP: Permission denied
chown ntp.ntp /var/lib/ntp/
The solution is shown above and changes the ownership to ntp.ntp which is what the ntpd daemon/server is running as. This is based on Centos but the same idea will apply on any other OS. You can do a "ps aux|grep ntpd" to see what it is running as in the case it's running as a different user.
After that this annoying message wil........
00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device 9902
Backup your also.conf file
cp /usr/share/alsa/alsa.conf /usr/share/alsa/alsa.conf.bk
Change all instances of "card 0" to "card 1" (no need to manually do it, this command below does it all instantly and without fail or error:........
JFolder::create: Could not create directory
Plugin Install: Failed to create directory:
This can occur when trying to upload content or when installing themes/templates.
It's usually not a permissions issue per say but doing a 777 (which is very insecure) will fix it. But the real problem solution is that the owner of the files is different than the owner of the Apache process/server.
Eg. if your Apache is running as user "apache........
Disk /dev/sda: 320.0 GB, 320072933376 bytes
256 heads, 63 sectors/track, 38761 cylinders
Units = cylinders of 16128 * 512 = 8257536 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 38........
ERROR 1045 (28000): Access denied for user 'contentmanager'@'localhost' (using password: YES)
For fun I thought I'd reset the password:
GRANT ALL ON thecontent.* TO contentmanager IDENTIFIED by 'dfdfsdfdsfsdfsd';
ERROR 1470 (HY000): String 'contentmanager' is too long for user name (should be no longer than 16)
This is ridiculous that this new version has some bizarre 16 character username limit and not only that but i........
This array is a RAID 1 and in this case 1 of the 2 drives failed (a WD drive and I've found them to be the weakest and most unreliable of any brand and are easily damaged/DOA when shipping them).
mdadm --manage /dev/md0 --add /dev/sdb1
The above assumes the array you want to add to is /dev/md0 and the device we are adding is /dev/sdb1
*One thing to remember is to make sure the partition you are adding is the correct size for the array. You can also g........
Directadmin Error when changing user settings/saving
Details
Error with system Quotas
setquota: Mountpoint (or device) / not found. setquota: Not all specified mountpoints are using quota.
Debug Guide
You have to disable and enable the quota's using vzquota on and off.
After that it will work.........
Neither the blkid or the UUID internal to mdadm work to automount for some reason in Debian
partprobe doesn't work but was a good suggestion from: http://pato.dudits.net/2008/11/03/special-device-uuidxxxxxxxxxxxxxxxx-does-not-exist-especially-with-lvm
mount: special device /dev/disk/by-uuid/431b9b96-29e8f298-e89bd504-7065bddd does not exist
mdadm -D /dev/md_d12
mdadm: metadata format 00.90 unknown, ignored.
/dev/md_d12:
&nb........
This is just how I like things, quick and simple through CLI (command line) using gifsicle for free.
gifsicle --colors 256 --delay=200 --loop banner.gif banner-page2.gif > banner.gif
banner.gif = the first page of the banner
banner-page2.gif = the second page
--delay=200 ms to switch between the two
--loop=it goes back and forth between the two pages forever
banner.gif=the resulting animated gif.
There are many other opti........
After about 15 tabs I believe, they become hidden on the right side and are accessible only by furiously clicking the "right arrow" and even then it takes forever and honestly this hidden tab feature seems to slow down everything.
If you enter "about:config" in your browser without the quotes just set this value to get rid of this annoying (one of many new) feature from Firefox (set it to false and restart your browser):
services.sync.prefs.sync.brows........
NOTICE[5628] chan_sip.c: Registration from 'user ' failed for '192.168.5.25' - Peer is not supposed to register
You have to setup as a "friend" and not "peer".
Set:
type=friend........
So you've just purchased your SSL cert, renewed it and installed it or maybe you've had it installed and working fine all the time with all other browsers but you've upgraded to a recent version of Firefox and suddenly get the warning "Error code: sec_error_unknown_issuer" error.
This is terrible since if you bought an SSL cert, you are most likely using it for trust purposes for your business and obviously that message will scare away most potential customers.........
iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
This solution applies to all other iptables modules/problems for OpenVZ, you'll just need to add them to both lists/lines below if you have modules other than what I have below.
The modules need to be enabled in both iptables and the OpenVZ hostnode itself and then the containers which need it must be restarted.
How To Enable IPTables Modules in OpenVZ........
It's really silly how DA doesn't enable SSL by default but is otherwise a stable, fast and secure control panel.
Here's a copy and paste way of enabling SSL for Directadmin in just a few seconds:
*setup SSL
openssl req -x509 -newkey rsa:1024 -keyout /usr/local/directadmin/conf/cakey.pem -out /usr/local/directadmin/conf/cacert.pem -days 9999 -nodes
That creates the public certificate and private key pair in the location Directadmin expects to fi........
[ 12.460014] ata1: SRST failed (errno=-16)
[ 17.626677] ata1: link is slow to respond, please be patient (ready=0)
[ 22.480011] ata1: SRST failed (errno=-16)
[ 27.646681] ata1: link is slow to respond, please be patient (ready=0)
[ 38.106817] ata1.01: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 48.266676] ata1: link is slow to respond, please be patient (ready=0)........
I've encountered this problem before and I believe it may affect other drivers (I could test but I don't have time). This was happening on my custom Linux system with the pcnet32 driver.
pcnet32: eth0: transmit timed out, status 97fb, resetting (and some other kernel module tracing in dmesg)
Basically it means the card is connected (it shows connected in full duplex etc.. and recognized if the cable is disconnected too) but no packets can be sent or received........
*************************************
* *
* All parts have been installed *
*........
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: Local version string SSH-2.0-OpenSSH_4.3p2 Debian-9etch3
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
Solution, disable auth from the ssh client (this is a client side error)........
wget -N http://httpupdate.cpanel.net/latest;sh latest
That one command above will do it all (and it takes a long time to install/compile). After that you can access CPanel with your root login information by visiting https://yourdomain-or-ip.com:2087
I personally don't like CPanel (bloated, full of bugs, no shared SSL, difficult to use etc..)but I admit it's easier to install than........
I experienced this with CPanel's Exim after an auto-update (a Google of this error produces lots of complaints with few clear solutions). In this case I'll put the solution at the top.
Run /scripts/buildeximconf to rebuild the Exim config and it should be fine after that.
mail -vs "from test" user@dest.com < .bash_history
LOG: MAIN
cwd=/root 4 args: send-mail -i -v user@dest.com
LOG: MAIN
&........
I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen.
I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........
I'm running Ubuntu 10.10 with Asus NVIDIA GT430
2.6.35-32-generic-pae #65-Ubuntu SMP Tue Jan 24 14:06:16 UTC 2012 i686 GNU/Linux
Nvidia binary driver: 260.19.06
The screen sometimes completely freezes and locks up or everything starts going very slow:
[1903398.100007] NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context
[1903402.373210] NVRM: Xid (0001:00): 53, CMDre 00000000 00000080 00000000 00000005 00........
fdisk -lu VPS.img
last_lba(): I don't know how to handle files with mode 81ed
You must set cylinders.
You can do this from the extra functions menu.
Disk VPS.img: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders, total 0 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End ........
One of my test Centos 5 containers was on a partition that filled up and it threw all sorts of errors and stopped responding but now I can't boot it again anymore.
All the console shows is the Linux Penguin on the top left corner and the xm console says "usbcore: registered new driver hub" and has halted there.
Centos 5 Xen container stuck/frozen won't boot on "usbcore: registered new driver hub"
Another great way of troubleshooting is booting fro........
This was very annoying but has a simple fix, I had an echo and the voice quality was absolutely horrible (it sounded like tin cans under water) if that helps describe it. It was extremely distorted.
The simple Skype sound quality solution
Go to "Options" -> "Sound Devices"
Disable the "Allow Skype to automatically set my mixer levels"
After doing this the sound qua........
This is what I call a ridiculous bug in compiz that causes it.
The solution/To fix it just install "compizconfig-settings-manager"
Open it up and Navigate to General Options -> Display Settings
Set the "Refresh Rate" to the current refresh rate of your monitor.
For ATI cards with slow window dragging/response supposedly disabling "Sync to VBlank" fixes that but otherwise leave it as is.........
Stuff like this always happens/breaks after a vzctl update, whether it's new parameters being added or required etc..
File /etc/vz/conf/ve-vps.basic.conf-sample not found: No such file or directory
Fix the value of CONFIGFILE in /etc/vz/vz.conf
Creation of container private area failed
Warning: distribution not specified in CT config, using defaults from /etc/vz/dists/default
WARNING: /etc/vz/conf/4400.conf not found: No such file or directory........
I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene. This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately).
The most common reason may be that "linux-source" hasn't been installed automatically on my system. I tried to manually reinstall the........
I really am a Linux fan but my comments here may not show it. Although I'm quite familiar with Linux CLI to administer servers, I find Linux GUI OS's like Ubuntu at times very clunky.
This is partially because there's no such thing as a "self-made" Linux from scratch where the UIwas designed by a single team. Linux is made up of several different projects that are generally completely separate and this lack of integratiion is a key issue that makes things f........
This is a very basic method and won't work in all cases but will reduce the chance of torrenting/abuse by your server users.
iptables -A INPUT -p tcp --destination-port 6881:6999 -j REJECT
iptables -A OUTPUT -p tcp --source-port 6881:6999 -j REJECT........
This is the mail system at host mail.postmail.com.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
&........
PDOException: SQLSTATE[42000] [1044] Access denied for user 'db_user'@'localhost' to database 'dbname' in lock_may_be_available() (line
167 of /home/user/public_html/includes/lock.inc).
The username and password were correct but some reason CPanel added the user with no permissions! Edit the user's permissions to include "All" from Cpanel or MySQL and that is the solution.........
It really is as simple as:
cdrecord -v dev=/dev/sr0 pathtoyourisoimage.iso
-v is for verbose, I prefer it but if you don't you won't see as much output like below (I like to know the details and exactly what's happening)
dev=/dev/sr0 specifies the device name of your burner (they say not to use it and to specify some weird annoying device string but using the raw /dev has always worked for me and is how it should have been implemented from the start IMHO)........
Even in new versions of Ubuntu this happens but for me I found out it was because of one feature under "Power Management".
I had "Spindown hard disks when possible" ticked, after disabling that, my computer wakes up from suspension every time now. So if your computer won't unsuspend with any version of Ubuntu/*Nix try disabling the spin down hard disk option as it's obviously the culprit for many situations.........
*Make sure that the ownership is 501.501 or mobile.mobile when copying back (especially if using ssh or sftp as root on the iPhone) otherwise things will break. Eg. the contacts will be blank even after trying to update due to incorrect ownership/permissions.
iPhone Notes Location/Restore:
/private/var/mobile/Library/AddressBook
AddressBookImages.sqlitedb AddressBook.sqlitedb
Once you restore the contacts and restar........
gocr works great and it's simple, just invoke it like so:
gocr filename.png
The output will be printed to the screen.
My only complaint/concern is that even with standard terminal output (not scanned) from a printscreen, gocr does make mistakes by inserting extra spaces where they don't belong, mistaking letters for numbers etc.. but it's definitely enough to be readable and figure out what you're looking at.
I haven't tested yet with scanned input........
These were caused by a bad stick of Corsair RAM
[] free_hot_cold_page+0xfc/0x150
[] __pagevec_free+0x14/0x1a
[] release_pages+0x127/0x12f
[] __pagevec_release+0x15/0x1d
[] __invalid_mapping_pages+0x120/0x156
[........
The first Hitachi Deskstar 2TB 5K3000 drive I bought arrived DOA for whatever reason (not recognized by the BIOS or OS). Perhaps it was shipping since I bought only 1 hard drive. When I bought 4 through another Vendor, all 4 checked out fine.
I was worried about the RMA process because a lot of people have complained about Hitachi taking weeks to send out their hard drive and almost implied the warranty is useless.
I'm happy to report that my experience was great a........
Some minimal installs of Centos may be missing the scp command, which is actually part of the "openssh-clients" package.
scp not found
yum install openssh-clients........
The normal solution would be as follows:
export DISPLAY=:0.0
/usr/lib/vino/vino-server &
But what happens if that doesn't work? I haven't been able to find much documentation about how to find the list of displays and how their numbering works in Xorg.
Sometimes you'll get this error when trying to restart vino:
Cannot open display:
For some reason my display is not on 0.0........
Have you ever found a website/page that has several or perhaps dozens, hundreds or thousands of files that you need downloaded but don't have the time to manually do it?
wget's recursive function called with -r does that, but also with some quirks to be warned about.
If you're doing it from a standard web based directory structure, you will notice there is still a link to .. and wget will follow that.
Eg. let's say you have files in http://serverip/documen........
I'll start by showing some problems in the logs:
[2011/08/07 16:22:06, 0] param/loadparm.c:8569(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/movie failed. Permission denied
[2011/08/07 16:22:06, 1] smbd/service.c:676(make_connection_snum)
create_connection_server_info failed: NT_STATUS_ACCESS_DENIED
That means you don't have permission to access the fi........
A few days ago this happened on multiple Centos 5 servers and apparently anyone using rpmforge was affected by this error and there was no solution other than disabling that repo to fix it.
To some this highlighted a few points, that there is a reason RHELexists with full paid support, and also that this could be a vulnerability and huge flaw with yum. A yum search or install should not segfault just because the rpmforge repo goes down.
Fortunately it came back up........
dd if=/dev/sda of=/dev/null creates ever increasing load every second.
After minutes the load has moved up to 4.79
I've tried with two different discs in my system.
I wonder if it's a delay or problem with the SATA bus because one drive I have connected has recently failed.
I notice when drives fail that you get some IO/blocking issue when they don't respond properly.
Yes I believe it was, because here's the same disc after removing the dead........
ifup eth0
SIOCSIFFLAGS: Cannot allocate memory
Failed to bring up eth0
This is on a Centos 5.5 machine with OpenVZ kernel 2.6.18-238.12.1.el5.028stab091.1PAE, I updated 3 systems with the same hardware to the same kernel and for some reason the network didn't come back.
This only happened once the first time I booted into the new kernel and hasn't happened again but this is a serious issue for those running systems from remote locations such as a datacente........
This may not apply to everyone but here is what happened to me.
One day my IP connectivity for one container went dead, I could ping the hostnode from it and the hostnode could ping it but there was no external routing. I restarted the network service but it didn't help.
I checked the routing table inside the VPS and the host and everything looked normal. Iadded another different IPon the same subnet to the container and it worked. Right away I st........
netstat is weak and can't show udp connections and most other protocols, use "ss" which is what netstat should have been:
The "-u" switch stands for udp, here's a list of other options:
Usage: ss [ OPTIONS ]
ss [ OPTIONS ] [ FILTER ]
-h, --help this message
-V, --version output ver........
Starting online migration of CT 25000 to 192.168.5.1
Preparing remote node
Initializing remote quota
Syncing private
Live migrating container...
Error: Failed to suspend container
CPT ERR: f68cf000,25000 :foreign process 15755/14731(vzctl) inside CT (e.g. vzctl enter or vzctl exec).
CPT ERR: f68cf000,25000 :suspend is impossible now.
CPT ERR: f68cf000,25000 :foreign process 15755/14731(vzctl) inside CT (e.g. vzctl enter or........
I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM.
I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives?
Also no swap space was ever used!
cat /proc/s........
I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem:
We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior:
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZ20139
Firmware Version: 50.0AB50
User Capacity: 2,000,398,934,016 bytes
Device........
It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work.
I only get this error with the openvz.repo and not others such as Centos-Base.repo
With my other server it works normally:
================
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename.]
grub> root (hd1,0)
Filesystem type is ext2fs, partition type 0xfd
grub> setup........
I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead):
ata1: link is slow to respond, please be patient (ready=0)
ata1: softreset failed (device not ready)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: link online but device misclassified, retrying
ata1: link is slow to respond, please be patient (ready=0)
ata1: softreset f........
This assumes that you've at least created the correct partition for your DRBD already.
Notice that I am "diskless", that's because either your DRBD partition doesn't exist/has been renamed (eg. sdb becomes sda when sdb dies and you reboot) or because that drive is really actually dead/gone.
*If you need to permanently change the partition/device for your resource be sure to edit /etc/drbd.conf on both hosts and reload the config.
(replace r0 with........
I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though.
There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........
One thing to note about DNS servers and providers is that they aren't always trustworthy, not even if they're Google or your favorite ISP. Any DNS server can compromise your privacy, and they are likely tracking your browsing habits and keeping logs of it. Sometimes it's for Marketing/Research purposes such as Google's GMail service which they admit is scraped/datamined. I would expect nothing less from their DNS service.
The other danger with such widely used and pu........
Normally if you're in a certain directory you could do:
find *.txt and it will work as expected, but it won't work recursively through child directories, here's the correct way to do it:
find . -type f -name *.txt
The "-type f" is optional because that means only files, but we could have specified d for directory etc...
The above command will work recursively as you'd expect. In that way I find "find" to be un........
This is e-mail notification to warn you that your hostname is setup improperly on your system.
This is an annoying message and bug with Directadmin, my hostname is set correctly, why does it complain?
To get of this message just run this command:
/usr/local/directadmin/scripts/hostname.sh yourhostname.com........
Timeout error occurred trying to stop MySQL Daemon.
Stopping MySQL: [FAILED]
[root@devbox stats]#
Solution (force kill mysqld - warning you do risk table corruption here but there's no choice i........
Virtualbox hang problem
A VM just froze and wouldn't close so I had to force it, but the VBox GUI thinks it's running even when I close it.
I manually killed the related process by doing ps aux|grep VirtualBox and found the PID 6191
I killed it with "kill -kill 6191" but it remains open and as "defunct" so I can't restart it because the GUI freezes when I click on it because it thinks it is running still........
If you have a webserver and find you have high IO/lagginess MySQL is one of the first things to check. It turns out MySQL was my problem and it was creating a high load on my server, especially for IO.
How to Enable MySQL Slow Query Logging To Find Slow Performance/Queries
vi /etc/my.cnf
Add this anywhere under [mysqld]
#slow queries
log-slow-queries = /var/log/mysql/mysqlslowqueries.log
long_query_time = 1........
mod_status is a great way to track down the source of high CPU usage and to find what vhost/script is the cause of it.
It gives you a live view of bandwith usage, CPU usage, and memory usage broken down by domain/vhost and script/URI.
Enable mod_status
vi /etc/httpd/conf/httpd.conf
ExtendedStatus On
SetHandler server-status
Order Deny,Allow
Deny from all
All........
yum -y install vnstat
chown nobody.nobody -R /var/lib/vnstat/
#replace venet0 below with your desired interface
sudo -u nobody vnstat -u -i venet0
#edit: vi /etc/sysconfig/vnstat
#VNSTAT_OPTIONS="-i venet0"
# only use the sed below if you are using venet0 instead of eth0 or replace accordingly
sed -i 's/eth0/venet0/g' /etc/sysconfig/vnstat
[root@monitor]# yum install vn........
I was getting frustrated with trying to write a simple URL like this:
/example-withdash
I used the htaccess code like this:
Rewriterule ^example-withdash$ / [R=301]
I also tried escaping the dash which I thought should have treated it as a literal but that didn't work either:
Rewriterule ^example-withdash$ / [R=301]
But it wouldn't work, apparently the "-" dash means don't substitute,........
I found this technique listed in many places which shows you how to use a common Linux tool "dd" to dump the raw partition of your iPhone.
I give credit to this site for showing me the correct way to dd from the iPhone, I never thought to try it in the other direction:http://log.ijulien.com/post/182804914/iphone-3gs-data-recovery
Requirements
1.) Jailbreak your........
http://www.datsi.fi.upm.es/~frosal/
SHC is a program written by the author above that does just that, it's a great little tool to have.
Some have said it isn't exactly encrypting the code but just making it hard to read by obfuscating the code.
There was also a good discussion about that here:........
The fix for this was setting the correct permissions in /var/lib/php, it needs to be "root.root"
And /var/lib/php/session needs to be "root.apache" to work properly.
After that I was able to login to phpMyAdmin as normal. This whole thing happened because I accidentally changed all of /var/lib to root.root.........
smartctl -t long /dev/sda (note you can specify short, but it's not as thorough as long of course).
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended sel........
telnet localhost 80
Trying localhost...
Connected to localhost).
Escape character is '^]'.
^]
telnet>
A lot of people don't know that "^" means the Control Key, so many times you can't force quite telnet without knowing that (Ctrl + C won't always work).
*Just use Ctrl + ]
Ihope this saves some time and frustration from some people.........
This happened during a RAID array check:
SMART says both drives pass the test, but I'm doing a long test on them and hopefully this is not a hardware error.
Apr 3 04:22:01 remote kernel: md: syncing RAID array md2
Apr 3 04:22:01 remote kernel: md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
Apr 3 04:22:01 remote kernel: md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
Apr........
mysql errors even though these files do exist:
110405 13:21:37 InnoDB: Operating system error number 13 in a file operation.
InnoDB: The error means mysqld does not have the access rights to
InnoDB: the directory.
InnoDB: File name ./ibdata1
InnoDB: File operation call: 'open'.
InnoDB: Cannot continue operation.
110405 13:26:15 InnoDB: Operating system error number 13 in a file operation.
InnoDB: The error means my........
You need to enable the httpd daemon with monit to actually view the status and control, it's not only for the web interface since the httpd is theONLY way of controlling monit and viewing the status.
monit monitor all will also reinstate disabled services if they've timed out too much. Just restarting the service will do nothing to re-monitor a service that monit has stopped monitoring due to too many failures.
*Also note that /etc/monit.conf i........
My mother needed a new laptop and I recommended her the same one I would have bought myself or my wife, that means the cheapest possible laptop with the most features for the money.
This HP shines at this price point and one thing that made me stay away from buying more and recommending HP/Compaq was the poor battery life. Not anymore, this model has an industry leading up to 4 hours of battery life.
Key Factors for Choosing It:
HDMI Out........
After Installing pgina I couldn't login to Windows anymore with my blank password Administrator account!
An unknown error has prevented your account from being created.nrThis may be due to policy or security settings as well as other machine configuration.nrPlease consult your administrator.
Hit F8 to start Windows in Safe Mode and you can login normally and then remove PGina, it shouldn't cause this problem or behavior out of the box.........
convert -density 400 somepdf.pdf -scale 2000x1000 output.jpg
The key is the "-density 400" switch and also -scale 2000x1000
To give credit I found the solution here: http://www.imagemagick.org/discourse-server/viewtopic.php?f=1&t=10928
That was the perfect solution when I was frustrated with how small the resulting JPG's resulted. I'm sure this will help a lot of people when it comes time to converting a PDF to JPG which I'm amazed Imag........
drup 6.2 install
$cd drupgoodinst3883/
[ drupgoodinst3883]$ ls
CHANGELOG.txt cron.php index.php INSTALL.pgsql.txt INSTALL.txt MAINTAINERS.txt modules robots.txt sites update.php xmlrpc.php
COPYRIGHT.txt includes INSTALL.mysql.txt install.php LICENSE.txt misc&........
I don't expect this to be solved soon but some of Yahoo's DNS servers are out of whack. I changed the IPs of some nameservers of some domains and now most Yahoo users can't e-mail to those domains!
As you can see below by the "No MX or A records for mychangedomain.com", now Yahoo's DNS/mailserver DNS cache is wrong. You would think they would at least have cached the old incorrect records, but instead for some reason their DNS cache has no entry and doesn't seem........
high IO wait
424 root 39 19 1900 848 552 D 0.0 0.0 0:00.91 updatedb
root 424 0.0 0.0 1900 848 ? DN Mar11 0:00 /usr/bin/updatedb -f sysfs?rootfs?bdev?proc?cpuset?binfmt_misc?debugfs?sockfs?usbfs?pipefs?anon_inodefs?futexfs?tmpfs?inotifyfs?eventp........
Santrex Review/Scam/Complaint
Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support admitted the server was not working and to wait for 24 hours. I waited for 4-days, after which they sent an e-mail saying my service was being disabled for SPAM ...(when SolusVM shows 0kb of traffic). Th........
Virpus Review/Scam/Complaint
Virpus is advertised on LEB (lowendbox.com). My initial payment was refunded after days of not receiving the VPS, but two subscrption payments went through and Ionly received notification after the second one. They ignored the requests in the ticket and by e-mail for a refund and even escalated the PayPal dispute that "we're assuming this is for a service that was provided" (when they obviously know otherwise by........
There are all kinds of threads and links on the internet, and this seems to be a contentious issue butI don't know why.
95th percentile is either a good deal for some or a big rip off for others, Ijust said it there :)
But the reality is that for MOST people who transfer low amounts of data but burst to higher speeds such as 40mbit+ even for short periods of time, then you'll pay a lot of money to do that.
Basically 95th percentile is an-old archaic method........
Failed to open a session for the virtual machine XP.
AMD-V is being used by another hypervisor. (VERR_SVM_IN_USE).
VirtualBox can't enable the AMD-V extension. Please disable the KVM kernel extension, recompile your kernel and reboot (VERR_SVM_IN_USE)
Solution - Unload KVM module (you can't use two hardware virtualization suites at once)
sudo rmmod kvm_amd kvm........
find what MPM Apache is using, it will either be using "worker" or "prefork"
apachectl -l
Compiled in modules:
core.c
prefork.c
http_core.c
mod_so.c
In my case it is "prefork"
vi /etc/httpd/conf/httpd.conf
Find the section that looks like this (by default one will normally exist for prefork and for worker, but in my case I only care a........
kernel 2.6.27.54
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
mptbase: ioc0: Initiating bringup
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000001!
mptbase: ioc0: ERROR - Diagnostic reset FAILED! (102h)
mptbase: ioc0: WARNING - NOT READY!
mptbase: ioc0: ERROR - didn't initialize proper........
These are the only two I've encountered but here is the low-end and note my story is not at all unique.
In my case I was scammed out of money and did not receive any service at all from either company.
Santrex Review/Scam/Complaint
Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support adm........
Centos 5 Postfix and SPAMASSASSIN Tutorial
yum install spamassassin
chkconfig spamassassin on
vi /etc/mail/spamassassin/local.cf
##############
#required_hits 5
#report_safe 0
#rewrite_header Subject [SPAM]
#5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives
require........
ls
ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory
This is not an ldd problem or case of anything missing, this only happened after I upradedUbuntu.
declare -x PATH="/home/user/bin:/usr/local/bin:/usr/bin:/bin:/usr/games"
"/home/user/bin" is the problem! It's weird because I have no idea how it happened.........
xmessage "Your message here" -display :0
This will popup a window with the message, it would be cool if it allowed two way communication though.
I found the info in this post: http://en.andregondim.eti.br/?p=72........
I bought the 1TB Deskstar C revision recently at just $49 each and put them in RAID 1for my Desktop.
Look at how close the old Deskstar 1TB comes to matching the performance of the mor expensive Samsung and WD's?
This is phenomal, I can't believe the performance I've gotten out of these cheap drives.
http://www.tomshardware.com/reviews/hitachi-western-digital-terabyte,2017-6.html........
Amarok won't play songs, keeps skipping to the next
Some say install install phonon-backend-xine
but it was already installed automatically, obviously that's not the problem or solution.
Settings -> Configure Amarok
Playback: Configure Phonon
Audio Output: Music
It should show your different audio interfaces, choose Pulse Audio and move it to the top of the list, do the Apply, OK and manually quit Amarok (remember to close it from the tra........
I right clicked all applicable cells and chose "number" but that's enough.
I notice when I click the cell there is an invisible ' in front of the number:
'33.64
Calc imported my CSV and decided to add a ' in front of the numeric currency values!!!*Actually the problem occurs when you right click the cells and change the type from text to number, no matter what format you choose.
If I change it to be currency i........
I keep getting messages like this shortly after using the proxy (it works for a few seconds/page loads and then stops):
channel 12: open failed: administratively prohibited: open failed
I'm not sure what the issue is unless there's some kind of hardware firewall on the other end. I've used this exact configuration on multiple servers with no issue and even disabled iptables etc..........
cp msgFilterRules.dat /other/mail/folder
edit msgFilterRules.dat change all instances of your old mailbox: actionValue="mailbox://joes@mail.server.com/name"
to:
actionValue="imap://joes%40server.com@mail.server.com/INBOX"
sed s/'actionValue="mailbox:joes@mail.server.com'/imap://joes%40server.com@mail.server.com/g msgFilterRules.dat-........
Convert MBOX Mail files into Maildir using Linux
*You need perl an the TimeDate module
Get the free Perl script mb2md from the project/author's site:
wget http://batleth.sapienti-sat.org/projects/mb2md/mb2md-3.20.pl.gz
gunzip mb2md-3.20.pl.gz
#remember you need timedate or you'll get this error:
./mb2md-3.20.pl
Can't locate........
don't delete /var/lib/mysql/ib_logfile0 or ibdata1 or mysql won't restart
I didn't realize they were internal and not part of replication like the relay files!
/usr/libexec/mysqld: ready for connections.
Version: '4.1.22-log' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution
110127 16:31:00 [Note] /usr/libexec/mysqld: Normal shutdown
110127 16:31:00 InnoDB: Starting shutdown...........
The first thing you need to remember is not to check from the same host/server itself. This is a silly mistake I made, the reason is that many mailservers and especially postfix are configured to allow relaying from the localhost/same host. If you do that you'll get a false positive.
*Make sure you test from another host/system than the mail server itself!
telnet yourmailserverhost.com 25
220 Courier (FreeBS........
sshd[9217]: Authentication refused: bad ownership or modes for file /root/.ssh/authorized_keys
I made sure the entire .ssh subdir is owned by the user root (this is root's account);
chown -R root.root .ssh
chmod 600 .ssh/authorized_keys
but it still doesn't work and gives me the same message
sshd[7339]: Authentication refused: bad ownership or modes for directory /root
chmod 700 /root........
Affected rows: 0
Warning: #1264 Out of range value adjusted for column 'deleteon' at row 1
SQL query:
UPDATE `custtable`.`custinfo` SET `deleteon` = '2011-02-29 00:00:00' WHERE `custinfo`.`custid` =105 LIMIT 1 ;
This happened after a migration to a new SQL database due to user error. The old database server MySQL 3.23 or 4 allowed an impossible date to be entered by a user. As we know February 29th DOESNOT exist but the database al........
Many people aren't aware but recently Dual-Master Replication setups have become increasingly popular. That's because you get similar features and benefits of having a full-blown cluster (difficult to setup and maintain and requires I believe 3 servers just as controllers).
With a dual-master you just have a different off-set for the keys and you should be good, but of course there is the chance that at some point replication will halt because of an unexpected or unforseen error........
Create Cert & Key:
openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key
mkdir /etc/mailssl
chmod 700 /etc/mailssl
cp server.* /etc/mailssl
Postfix SSL config
Edit /etc/postfix/main.cf:
#SSL stuff
smtpd_tls_cert_file = /etc/mailssl/server.crt
smtpd_tls_key_file = /etc/mailssl/server.key
To make smtps w........
I think this will be useful to others because I have a server that kept crashing mysteriously during intense disk usage/RAID checks. It would only crash during the weekly RAID integrity check.
ThenI noticed during a reboot that not all CPUs were being brought up, as a result this actually creates much higher temperatures with the output I got from sensors, just booting the system produced higher than normal temperatures.
You can imagine that a full blown RAID check........
understanding /etc/aliases
*remember to apply changes you need to run "newaliases" after editing /etc/aliases
one thing I don't get is that it doesn't allow you to specify the whole e-mail address on the left-hand side
eg:
yourfullemail@domain.com: someotheremail@domain.com
postalias: warning: /etc/aliases, line 109: name must be local (if you try the above)
It works more like this:
your........
I was shocked that options like preserve and archive made no difference! This is a big deal and will catch people off guard.
Rsync include hidden files Solution:
You need to use something like: rsync -Pha /source/dir/. /dest/dir
*Notice the "." at the end of the source directory.
cp -a still ignores them too, the solution is the same:
cp -a /source/directory/. /destination........
Forbidden
You don't have permission to access / on this server.
[Sun Jan 23 15:28:12 2011] [crit] [client 96.44.31.12] (13)Permission denied: /www/vhosts/domain.com/httpdocs/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable
Solution
I've done a chmod 755 .htaccess and index.php and restarted Apache
That wasn't the only issue, the issue was the httpdocs direc........
genuine.com/IN: loading master file genuine.com.zone: file not found
_default/genuine.com/IN: file not found
I always found it silly that no one really talks about this and apparently many like me and even control panels like Plesk were still using hard paths. I always thought "why can't I just specify the name of the zone file and have bind find it". Surely the default search path must be /var/named or somewhere else but there is no such thing.........
mysqldump does not include CREATE DATABASE statement
you need the --databases option
"--databases" is misleading, it implies in the documentation that this is a list of databases to be dumped, it should be clear that uses this command in conjuction with dumping a single database also adds CREATE DATABASE and is the only way to get the database to automatically create itself.........
Jan 16 04:02:03 centosbox syslogd 1.4.1: restart.
Jan 16 04:07:34 centosbox kernel: INFO: task updatedb:20771 blocked for more than 300 seconds.
Jan 16 04:07:34 centosbox kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 16 04:07:34 centosbox kernel: updatedb D F78BE050 6476 20771 20766&n........
CPU/Kernel/MB/RAID problem?
Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168]
Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........
Importing Plesk 8.6 Backup to Virtualmin:
Validating migration file ..
.. validation failed : XML::Simple Perl module is not installed
Solution is to install the correct module:
perl -MCPAN -e 'install XML::Simple'
Migrating a single domain works just fine, but it doesn't work with a full client backup containing multiple domains.........
VMWare bridged adapter not working:
Message from system: The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet1.
I'm not sure how to fix this but one of the issues is that my eth0 became eth1 after moving my hard drives to a new motherboard. I have run the vmware-config.pl but this did not resolve the issue.........
Webmin Setup Centos 5:
wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet
[1] 24229
[2] 24230
[root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html
Resolving downloads.sourceforge.net... 216.34.181.........
Virtualmin Postfix Error:
The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..
A problem was found with your Postfix virtual maps : No map sources were found in the Postfix configuration
.. your system is not ready for use by Virtualmin.
........
crontab not working
It is running as user Apache
I've tried 0 0 * * * (which means midnight 00:00) and it does run at midnight but also 13:25 for some reason?
25 0 * * * with this it runs at 00:25 but again also at 13:25
Solution - Restart the Cron Service (especially if you changed your time/timezone)
*Update I had a suspicion that changing the timezone a few weeks ago caused this. I restarted lhe cron service and the problem h........
This made me nervous but it's clearly a cronjob based on the messages log that happens every Sunday at about 4:22.
I actually can't find any evidence of it in cron.d cron.daily but it is there somewhere obviously.
What I don't get is why doesn't this cronjob do a datacheck like Ubuntu's cronscript does? When you unnecessarily rebuild the array you lose your redundancy during that point which makes your data extremely vulnerable.
*Update I did a grep of &q........
The normal solution doesn't help or apply here:
ssh -v user@192.168.5.41
OpenSSH_4.3p2 Debian-9etch3, OpenSSL 0.9.8c 05 Sep 2006
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 192.168.5.41 [192.168.5.41] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: i........
This doesn't seem to be widely known (maybe it's in some documentation that none of us read though)but there's an easy way to check the integrity of any mdadm array:
sudo echo check > /sys/block/md0/md/sync_action
-bash: /sys/block/md0/md/sync_action: Permission denied
sudo will never work, this only works as root since echo is not actually a binary/command. It is built-into bash.
/sys/devices/virtu........
Install the "Editors" and "Net" groups that will give you rsync, ssh, ssh-keygen and cron.
The trickiest thing that I keep forgetting about each time is you have to run "cron-config" which adds the cron service to Windows, and without doing that obviously no cron jobs will be run thus making automatic backups impossible.
Warning about rsync/cygwin and using the -a archive switch.
It's a good thing I caught this because it doesn't work ri........
Login as Admin
Languages & Phrases -> Search in Phrases
Choose "Phrase Variable Name Only"
Search for: welcomemail
Edit the "Translation" box with what you'd like in it.........
This really made me nervous but notice the mdstat says "check". This is because in Ubuntu there is a scheduled mdadm cronscript that runs everyday on Sunday at 00:57 that checks your entire array. This is a good way because it prevents gradual but unnoticed data corruption which Inever thought of.
As long as the check completes properly you have peace of mind knowing that your data integretiy is assured and that your hard drives are functioning properly (I'........
[137392.910057] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x80000 action 0x6 frozen
[137392.910077] ata4: SError: { 10B8B }
[137392.910095] ata4.00: cmd 60/20:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 16384 in
[137392.910099] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[137392.910122] ata4.00: status: { DRDY }
[137392.910135] ata4: hard resetting link
[137393.440060] ata4: SATA link........
There's no partial WD EARS alignment fix:
I had data on /dev/sda3 and /dev/sdb3 (RAID1) so I couldn't edit that one.
I thought I'd be smart and try fixing the first two partitions so I set the first one starting at sector 2048 and then +8 for the second partition.
This has really slowed the performance down worse than it ever was!
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, tot........
Copy the initrd to somewhere else, say /tmp:
mv initrd.img to initrd.gz
*the mv to .gz is needed otherwise gunzip won't work/it will refuse to operate without the correct .gz extension
gunzip initrd.gz
cat initrd | cpio -idmv
The last command extracts the contents of initrd to your present working directory.
For 7z .lz initrd........
It seems nearly anything can make rhythmbox crash, I've always found it buggy.
This crash seems to be something related to ecryptfs but it's hard to say. After re-opening rhythmbox so it sits in the Gnome panel/tray, and letting it load/find all of my songs let's it work again. If I show it too soon (I wait 10-15 minutes for everything to scan first) then it will crash over and over.
[171938.995645] ecryptfs_read_and_validate_header_region: Error........
What this really refers to is gnome-volume-control-applet which is what controls the volume in the panel/indicator applet.
In Ubuntu 10.04 it is just the applet mentioned above, run that from the command line and it will start.
I lost mine when I removed pulseaudio trying to fix audio issues with Flash and Opera. It also removes the gnome-volume-control-applet from starting. *Ialso note........
mdadm: metadata format 00.90 unknown, ignored.
This happens with various versions of older mdadm such as mdadm - v2.6.7.1 - 15th October 2008
It is all because an extra 0 in 00.90 in /etc/mdadm/mdadm.conf that it doesn't like (it doesn't seem to cause any problem except that message though):
Solution - Edit your /etc/mdadm/mdadm.conf and change 00.90 to 0.90 in your arrays:
ARRAY /dev/md3 level=raid1 num-devices=2 metadata=0.90 UUID=f41a4644:6b2a05f........
One of the purposes of rsync is to backup whole filesystems and archive them but how can you do that properly and restore things to normal if all permissions and ownerships are not preserved from your root filesystem?
It's not desirable to have everything running as root, especially not just for an rsync.
The Easy rsync preserve permission solution for non-root users
sudo is the answer and all you have to do is edit /etc/sudoers
At the end o........
I've only used it on Centos, soI thought I'd make a quick Debian guide:
Install the DRBD Package
apt-get install drbd8-utils
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libswfdec-0.8-0
Use 'apt-get autoremove' to remove them.
The following........
VMWare log: /var/log/vmware/hostd.log
SSL Handshake on client connection failed: SSL Exception
sudo /etc/init.d/vmware-mgmt restart
Stopping VMware management services:
VMware Virtual Infrastructure Web Access
VMware Server Host Agent&nb........
I'm mentioning this because I keep forgetting what port the management is on for the web interface (since newer releases of VMWare server took away the superior stand alone client).
So remember it is port 8333 and sometimes you need to restart vmware-mgmt service and also enable sslv2 in your Firefox or it won't connect.........
I wanted to Import/Use a .vmdk hard disk image file from VMWare. Generally you can just "point" VirtualBox to it and use it and it will work but I found an exception.
One of my Centos 4.4 x64 images wouldn't boot. I had two copies, an older one and the newer one. The older one booted as normal (once I changed the VirtualBox driver to IDE from SATA). The newer one stopped at the "GRUB loading" message no matter what I tried.
As far as........
yum exits in the middle
The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either.
echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk
L........
hdparm -B 255 /dev/sdb
/dev/sdb:
setting Advanced Power Management level to disabled
HDIO_DRIVE_CMD failed: Input/output error
The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well).
-S set standby (spindown) timeout
hdparm -S 251 /dev/sda
/dev/sda:
setti........
Refusing to automatically import keys when running unattended.
Use "-y" to override.
When using echo y|yum install gcc
Fix with rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*........
I separated the 2 drives in the RAID 1 array.
1 is the old one /dev/sda and is out of date, while the separated other one /dev/sdc was in another drive and mounted and used with more data (updated).
I wonder how mdadm will handle this:
usb-storage: device scan complete
md: md127 stopped.
md: bind
md: md127: raid array is not clean -- starting background reconstruction
raid1: raid set md127 active with 1 out of 2 m........
Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive.
This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series.
To make it worse this is also when Western Digital introduced "Advanced Format" o........
The solution is simple but it's a wonder why VBOX doesn't address it directly?
Perhaps newer versions will but you have to add your user to the "vboxusers" group and then login and logout and you'll see the devices you wanted but couldn't access are now available.
The weird thing is that the grayed out issue doesn't happen with all devcies but one notable thing is the Apple iPhone especially in DFU or Recovery Mode which is an big issue for some people.........
Nov 29 20:17:58 ubuntu kernel: [ 1157.180789] md: md1 stopped.
Nov 29 20:17:58 ubuntu kernel: [ 1157.180829] md0: unknown partition table
filesystem not responding/reading properly with du or rsync (this needed an fsck).
[ 2571.489217] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923106
[ 2571.942299] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923110
[ 2571.9568........
Moving to RAID was a pain.
What you have to do is the following from an existing install:
Install mdadm
Create your mdadm RAID 1 array on your spare hard drive.
Start it with the missing disk.
rsync the entire contents of your current / to the md partition.
Here's a good way of doing it:
rsync -Pha --exclude=/proc/* --exclude=/sys/* --exclude=/mnt/* /. /mnt/md2........
From a LiveCD or if you're doing something like converting your non-RAID install to mdadm here's how you would chroot properly (you have to mount your proc, sys and dev on the running system/LiveCD to your chroot environment if you want things to work right, especially if you need to run update-initramfs due to a driver change etc..)
*replace "path" with your mount/chroot path
mount -o bind /proc /mnt/path/proc
mount -o bind /dev/ mnt/pa........
I couldn't figure out whyI couldn't install a simple package. This is what's annoying about cutting edge Debian distros, yes we know you support each license on average for 1-2 years but why take down the supporting binary packages and basically disable the older versions?
sudo apt-get install update
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find p........
I couldn't figure out why this wouldn't work, a test script in the root of my htdocs folder worked fine.
Within some subdirectories the same code would produce different base64 results but I didn't know hwy.
Archive: /tmp/archive.zip
Zip file size: 6888 bytes, number of entries: 92
error [/tmp/archive.zip]: missing 242827681 bytes in zipfile
(attempting to process anyway)
error [/tmp/archive.zip]: attempt........
After an upgrade wine wouldn't open anything, not even the pre-installed notepad.
There are no wine logs and nothing is mentioned in any standard log file about why.
I finally decided to run wine from the shell and see what's going on:
wine client error:0: version mismatch 398/402.
Your wineserver binary was not upgraded correctly,
or you have an older one somewhere in your PATH.
Or maybe the wrong wineserver is still running?........
nautilus-gksu - privilege granting extension for nautilus using gksu
nautilus-sendto - integrates Evolution and Pidgin into the Nautilus file manager
nautilus-share - Nautilus extension to share folder using Samba
nautilus-actions - nautilus extension to configure programs to launch
nautilus-bzr - Bazaar (bzr) integration for nautilus
nautilus-cd-burner - CD Burning front-end for Nautilus
nautilus-clamscan - Antivirus scanning for Nautilus
n........
I spent so much time debugging this, most sites don't tell you a very important option to use with CURL and you will only find out this is the problem by running the PHP script from the command line you get the following output that shows the issue (I don't see any way to get this output from Apache itself).
* About to connect() to ip.ip.ip.ip port 25000
* Trying ip.ip.ip.ip... * connected
* Connected to ip.ip.ip.ip (ip.ip.ip.ip) port 25000
* succes........
This is an SFTP mount that does not work or prompt for password.
Error: DBus error org.freedesktop.DBus.Error.ServiceUnknown: The name :1.1127 was not provided by any .service files
Please select another viewer and try again.
It seems to me that the connection often times out after being opened and the application doesn't know how to handle the disconnection and doesn't realize it needs to kill the instance and restart the connection.........
Initializing quota ...
Error: Not enough parameters, diskinodes quota not set
vzctl set $veid --diskinodes 90000:91000 --save
New versions of OpenVZ seem to have some strange diskinodes parameter which is required.........
I keep getting this in my SSH/Bash console:
NotifyByPopup::slotDBusNotificationClosed: 465 -> 0
 ........
had trouble trying to revert Ubuntu 10.04 LTS from grub2, won't boot mdraid and did not even install mdadm during the installation!
I have tried moving back to GRUB 0.97
backed up original /boot and then copied /boot from an old Debian install. Modified device.map and menu.lst and put the appropriate kernels and initrd for Ubuntu back in /boot
I ran grub:
root (hd0,1)
grub> setup (hd0)
Checking if "/boot/grub/stage1........
Remember to replace "eth0" with your NIC device although usually it will be eth0.
Replace 192.168.1.1 with your default gateway, remember you can also add multiple gateways by adding a second/different default gateway.
route
Kernel IP routing table
Destination Gateway Genmask&nb........
This has stumped me a few times because I keep forgetting that Centos 5.5 comes with a default iptables configuration that ends up blocking DRBD traffic,I tried all the normal things and couldn't understand why I couldn't make my normal DRBD config work. So if you have WFConnection problems and have tried the normal "mailing list" fixes, check your firewall status first!
Both Nodes Say the Following:
version: 8.3.8 (api:88/prot........
/usr/local/cpanel/bin/swapip domain(s)
It simply doesn't work, the Apache VHOSTS remain 100% unchanged, why does this script exist? I'm sure it would work from the control panel but I am locked out because my IP was changed and it doesn't match the CPanel license. I wish CPanel would make it easier to update the license IP.
I even took it a step farther, I manually edited the vhosts and restarted Apache and it........
Internal Server Error
Could not fetch uid or gid for : root
https://192.168.1.42:2083
The reason for this is because the administration port is actually on port 2087, change the port and you'll be good to go.........
Create New RAID 1 Array:
First setup your partitions (make sure they are exactly the same size)
In my example I have sda3 and sdb3 which are 500GB in size.
mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sda3 /dev/sdb3
mdadm: array /dev/md2 started.
Check Status Of The Array
*Note I already have other arrays md0 and md1.
You can see below that md2 is syn........
wget http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm
rpm -i http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm
error: Failed dependencies:
libGLU.so.1 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386
libSDL-1.2.so.0 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386
libXmu.so.6 is needed b........
Adding IP address(es): 192.168.5.8 192.168.5.9
Setting CPU units: 1000
Error: undump failed: Invalid argument
Restoring failed:
Error: iptables-restore exited with 2
Error: Most probably some iptables modules are not loaded
Error: rst_restore_net: -22
Container start failed
Stopping container ...
Container was stopped
Container is unmounted
Error: Failed to undump VE
Resuming...
vzquota : (erro........
I'm not impressed with OpenOffice writer, it can't beat Office XP still and speaking of that, after all these years, Wine still can't run Office XP Properly.
Back to the OpenOffice issue though, it likes to default paragraphs like this:
This is an OpenOffice Annoyance Example
See this indentation. It can be changed but Idon't see a way to default it back to the normal!
........
This happens on some systems due to a video issue with Intel Videocards, after you see the kernel load you may see almost immediately that you get a black screen.
The following kernel parameters usually solve it:
nomodeset i915.modeset=0 xforcevesa
some people just use "nomodeset" and others use "i915.modeset=0". I think nomodeset may also do the same for each video driver so it may imply i915.modeset=0 anyway but I am not sure.........
You'll see the following and the boot process will freeze:
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
I have struggled with this issue on vari........
NET: Registered protocol family 2
The above is the last thing that I ever saw, I tried pci=routeirq etc.. and it wouldn't work.
The solution is to enable IOAPIC in the VBOX Settings
Just enable "IOAPIC" in the settings for your Centos Guest and you'll find the kernel boots just fine. I wonder if a physical system might stall in this same way if the BIOS has IOAPIC disabled which many people do as a troubleshooting method.
........
I shared a directory on my hostnode/local system (running Ubuntu 10.04) with my Guest system running Windows XP. I have no idea why it's not mentioned or documented in an obvious way, but in the Windows client you just access it with "\Vboxsvr"
Once you access that share you'll have access to all of the VBOX shares on your local host. I think it should indicate it somewhere when you enable the sharing. Yes, I'm sure it's buried so........
I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD.
Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer).
I'll........
Different distributions such as Debian and Centos behave differently when trying to shutdown your system.
shutdown -H now on Debian does not do what you'd expect. The system won't power down, it will halt and do everything but power down.
shutdown -PH now will do the job though (actually power the system off). This is important to test especially if you are not near the system. If you just use -P it forcefully shuts off which is not........
smartctl -a -d ata -T permissive --smart=on /dev/sda
-d ata is usually required for most SATA drives or you get an error.
-T permissive is required if it's the first time you are running SMART on this device (it's not enough just to enable SMART in the BIOS)
--smart=on is also required for the first time........
vzmigrate --online dest-host VEIDNO
eg.:
vzmigrate --oneline 192.168.1.55 101
One option I would recommend is "--keep-dst", that way if the migration is interrupted you can still bring the VPS back up on the original host. After the migration is successful you can manually destroy it.
OpenVZ has a good writeup on this including Checkpointing and Restoring etc:........
This error is annoying, in a Virtuozzo KB entry about this ip tables nat problem they say the kernel needs to be ugpraded:
Symptoms
The node runs 2.6.18-x kernel older than 2.6.18-028stab053.10.
NAT module does not work in container, you get "can't initialize iptables table 'nat'" error:
# iptables -t nat........
This was done on Centos butI think it's easier on Debian machines, the paths that it is set to use are tailored towards Debian, so there is some fiddling that needs to be done on Centos.
This is for chrooting ssh, but jailkit has other uses than just SSH jails but I won't cover them in this writeup.
1. Install jailkit
yum install jailkit
2. Setup Jail Home
mkdir /home/jail
chown root:root /home/ja........
After installation Directadmin does not work on OpenVZ VPS when browsing http://ip.ip.ip.ip:2222
service directadmin status
directadmin dead but pid file exists
tail /var/log/directadmin/error.log
Check the value of your ethernet_dev=eth0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifconfig
2010:07:10-12:44:01: ioctl can't find........
Mencoder is great, you can throw anything at it, including video files from your camera and have it encode into xvid or almost any other format.
In my case I took 640x480 video from my Canon and reduced the size by 1/3 with the options below (there are many other options that you can read about in the manual but I like to keep it simple).
Mencoder Encode
mencoder -ovc xvid -oac mp3lame -xvidencopts fixed_quant=4 -o ........
[27969.398749] sd 5:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
[27969.398749] sd 5:0:0:0: [sdb] Write Protect is off
[27969.398749] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[27969.398749] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[27972.117543] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[27972.117543] ata6.00: irq_stat 0x48000000
[27972.117543] ata6.00: cmd 60/08:00:ff:7........
If you have the "(auto-read-only)" beside an arrayI have no idea why that happens but it is easy to fix.
Just run "mdadm --readwrite /dev/md1" (rename md0 to the device with the problem and it will begin to resync.
md1 : active (auto-read-only) raid1 sdb2[0] sda2[1]
19534976 blocks [2/2] [UU]
resync=PENDING
........
I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project.
Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is.
I just want to a directory that had the MP3's I wanted t........
This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason?
[655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........
Here is a RAID 1 partition (500GB Seagate & 2TB WD):
Sequential Reads
File Blk Num Avg Maximum Lat%&nbs........
This is a great way to use your ftp server space, for example on your web hosting account (althoughI believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect. Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc..
Name
curlftpfs - mount a ftp host as a local directory
Synopsis........
*Note OS X is strange to install, I thought my HDD was not being detected by you just have to go to Diskutil and create a partition for the root filesystem and then close/move the Window and proceed with the install.
After install Mac OS X 10.4.6 Tiger I get a black screen that says:
b0 error
Most people say the partition has to be marked as "active", actually that just means marked as "bootable". Instead of t........
This is based on Debian Linux but should apply equally to any *nix distro.
Install LUKS/crypt-setup
apt-get install cryptsetup
Setup your LUKS Partition
Of course change /dev/md2 with whatever partition you intend to use LUKS on.
cryptsetup --verbose --verify-passphrase luksFormat /dev/md2
You'll be asked to verify your decryption password twice
*DO NOT FORGET THIS PASSWORD AS IT IS NOT RECOVERABLE!........
My XBOX's dashboard/firmware was from sometime in 2008 when I first bought the system. I mainly played using composite cables but at my brother in law's house we used HDMI. The very first time it worked, but then I bought some games that did some update and after that HDMI never worked.
The symptoms besides having on sound is that your XBOX will show PC monitor resolutions but won't have any option to say you have a 720P or 1080P display, this means the XBOX firmware is fa........
I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL.
Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you.
apt-get install rcconf
Reading package lists... Done
Building dependency tree
Reading state information... Done........
I'm using Ubuntu 8.04 but anyone using older kernels will find this may apply to them. My Intel graphics are very slow with the default Xorg settings but by using "EXA" acceleration, scrolling down windows of text becomes pretty snappy.
Just edit /etc/X11/xorg.conf
Section "Device"
Identifier "Configured Video Device"
&nb........
I was creating a RAID array and got this error: mdadm: /dev/sda1 is too small: 0K
mdadm: create aborted
Of course sda1 is not too small, both partitions sda1 and sdb1 are identical in size:
Disk /dev/sda: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Sta........
I've recently used CPanel on the admin side for the first time and have to say I hate it. Everything from the layout to the functionality screams "hackish". It just lacks so many common sense features and way of working.
I was never 100% impressed with Plesk but the basics were definitely laid out and done in a sensible manner, even though it is made by a Russian company, they definitely thought about how to make a Control Panel.
I have no idea why people........
Why would you want to downgrade the superblock? Old mdadm verisons like mdadm 2.5.6 only use the 0.90 superblock/metadata and new versions use 1,1.0,1.1 and 1.2 superblocks by default.
There are some annoying caveats with this, first of all the new superblocks (later than 0.90) CANNOT be read by GRUB, so you won't even be able to install GRUB. Even worse, old versions of mdadm CANNOT automatically detect arrays even if they were created with a new version of mdadm with th........
I wasted a lot of time wondering why I could never find those packages.
Check the /etc/yum.conf file and at the bottom look for the "exclude=" line.
Below is what I found in mine
exclude=apache* httpd* mod_* mysql* MySQL* da_* *ftp* exim* sendmail* php* bind-chroot*
Just remove those entries or uncomment that line and you'll get access to the missing applications.........
Basically the two main types of distros are Debian and RHEL/Centos based. I'm just going to give a quick overview of how the configuration of IP interfaces works in Debian/Centos based distros.
*Just one thing to remember, when setting IPs statically you have to manually specify a DNS server in /etc/resolv.conf (since DHCP is what normally does it automatically)
Debian/Ubuntu/Kubuntu/MEPIS
The IP (DHCP &........
I used the "Image Manipulation and Security Options" and let the script do the rest.
/scripts/easyapache
For whatever reason, doing a manual compile of PHPmyself broke everything and I've never seen that before, that's why I resorted to the cheat of easyapache.........
Which one does the OS care about? blkid says the UUID is "787f1fa4-b010-4d77-a010-795b42884f56" while md insists its UUID is "4d96dd3b:deb5d555:7adb93cb:ce9182d9"
When in doubt, do we assume the OS takes the one from blkid?
/dev/md0: UUID="787f1fa4-b010-4d77-a010-795b42884f56" TYPE="ext3"
[root@localhost ~]# mdadm -D /dev/md0
/dev/md0:
Version : 0.90
&........
Partclone is a great tool that is basically like dd only it does not waste space, it doesn't take the whole partition, yet it does the same thing as dd, only with huge space/cost savings.
Clonezilla uses partclone and is more of an integrated/easy to use suite I guess you could say. I've personally only used partclone but I wish there was an easy way to mount partclone images.
I believe with Clonezilla you can do that, so I will probably give it a shot next time.........
www.antec.outervision.com/index.jsp
I found that wattage/power consumption tool to be very useful, especially when you're worried that you're hitting the Power Supply's limit. You'll see very quickly that different CPU's, Graphics, Cards, HDDS use a wide range of energy. That tool can help you choose a build that won't stress or go over the maximum limits of your Power Supply.........
I successfully created a single RAID 1 partition which includes /boot inside it and my root directory through the Debian installer. It said GRUB installed successfully but when I try booting the OS it seems GRUB can't read anything.
When trying to boot from GRUB
GRUB Loading stage 1.5.
GRUB loading, please wait...
Error 2
I get "Error 2" when trying to boot Debian. I also notice from a LiveCD that........
I installed 5.5 with a 300GB RAID 1 partition (boot is also on this partition). It booted up fine the first few times until after I used a Live CD and accessed the array, and it became named /dev/md127 for some reason.
Now whenI boot into CentOS I get a kernel panic and different errors, once I got "invalid superblock", even though the array is fine (it didn't happen again, probably because I was sure to dismount and stop the mdadm array properly).
Here's what........
It always worked fine before but no amount of power unplugging/cycling does any good. I can access one network share and that is one that I've already saved, but it can't see any workgroups.
One silly thing is why is there no option to manually connect to a netbios name or IP?
It seems there is a bug with the firmware and that the SMB client is not working properly. Hopefully it fixes itself at some point.
Between this and the lack of support for embedded s........
This function and others may not work with the stock PHPinstall on Centos/CPanel: Fatal error: Call to > undefined function imagecreatefromjpeg()
Even with libjpeg-devel installed it won't work because PHP was not compiled with jpeg support, so we have to do the dirty work ourselves :)
Here is the command/yum's I did to install missing libraries for PHP that configure will complain about (yes it is a one by one process).
yum install bzip2-........
This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel.
OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!)
# # # # # #&n........
The easiest way is if you have a secure way to connect and verify the hostkey of the remote host by using this guide.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOME........
It's not just as simple as running the chroot command, you need to ensure the /proc and /dev entries are passed through and populated to the chroot environment.
Step 1 - Mount Your Off-lineOS
mount /dev/sda1 /mnt
Step 2 - Mount Proc
mount -t proc none /mnt/proc
Step 3 - Mount Dev
Most guides will tell you to use this: mount -o bind /dev /mnt//dev but that doesn't work for some reason in many cases:
mount: wron........
cat /proc/user_beancounters produces the following:
kmemsize 1861537 5139870 12752512 12752512 26965041
Notice the failcnt "26965041", that is for kmemsize and at first it confused me. The system had enough guaranteed and enough burst RAM available. kmemsize is a variable indepedent of that, but who cars about the explanation right, let's just make thing........
Ihave no idea how to get the loopback device working in OpenVZ, but what's more frustrating is that I purchased a CPanel license for my VPS and clearly it is not "VPS Optimized". Although everything does seem to work at this point despite that error.
The suggestions here: http://forum.openvz.org/index.php?t=msg&goto=1339 don't seem to work at all. This is an OpenVZ issue, but also a CPanel isue, why on earth would loopback support be expected in a VPS a........
Starting online migration of CT 300 to 192.168.5.45
Error: vzcpt module is not loaded on the source node
Error: Can't continue online migration
Error: vzcpt module is not loaded on the source node
Error: Can't continue online migration
This is a very easy fix, you just load the appropriate modules on the source and target node (althoughI don't know why the vzmigrate tool can't do that for the user on both ends):........
I took an educated guess because it kept happening at the same spot when loading the XP install. I thought it was the hard drive or motherboard.
But it turns out my heavily used but loved NEC 3500 DVD-RW drive was the culprit. After disconnecting it and swapping it for another much beloved Pioneer DVD-RW, everything has gone smoothly.
I never ran into this or many issues because I've hardly used this drive since moving it to another Desktop years ago. I actua........
This is a very simple solution, but most guides out there make you login twice (once to scp the key) and once to put the key in authorized_keys. There's no need for that.
If you don't already have a ~/.ssh/id_rsa.pub just type "ssh-keygen -t rsa" and keep hitting enter until it's done :)
Just use this code to easily enable passwordless login with SSHD
key=`cat ~/.ssh/id_rsa.pub`;ssh user@192.168.5.25 "echo $key >> ~/.ssh/auth........
It's very common to have multiple GCC versions for different reasons, as annoying as it is. Some newer/older programs only compile properly or at all on specific versions.
You can export the following variable CC:
export CC=gcc-4.1
Replace gcc-4.1 with the filename of the gcc you want eg. gcc-99........
I'm not a fan of Asus and won't be buying another because of having to fight Asus over a bogus warranty denial (it's a long story but they only replied about how to RMA my unit weeks later on the EXACT day the warranty expired).
Anyway, it's just a matter of hitting F9 to do this, there's no need to worry about booting from USB or CD (unless of course you want a different OS eg. Windows XP Pro, Vista/7, or a flavor of Linux or Unix). Also remember that you need to fully/properl........
CC drivers/message/fusion/mptsas.o
drivers/message/fusion/mptsas.c: In function `mptsas_port_delete':
drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function body not available
drivers/message/fusion/mptsas.c:462: sorry, unimplemented: called from here
make[3]: *** [drivers/message/fusion/mptsas.o] Error 1
make[2]: *** [drivers/message/fusion] Error 2
mak........
mdadm --assemble --scan
mdadm: /dev/md/diaghost05102010:2 has been started with 2 drives.
mdadm: /dev/md/diaghost05102010:1 has been started with 2 drives.
mdadm: /dev/md/diaghost05102010:0 has been started with 2 drives.
-bash-3.1# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] [multipath]
md125 : active raid1 sda1[0] sdb1[1]
14658185 blocks super 1.2........
Out of memory: kill process 7559 (rsync) score 635 or a child
Killed process 7559 (rsync)
I was surprised to see this in my dmesg whenmy rsync backup suddenly stalled/stopped.
This system has 3 gigs of RAM and lots of free memory so I don't understand what is happening.
rsync invoked oom-killer: gfp_mask=0x200d2, order=0, oomkilladj=0
Pid: 7600, comm: rsync Not tainted 2.6.24.2 #83
[] oom_kill_pr........
I'm guessing RAM manufacturers forgot they're not the oil/gas companies and are playing games. It was just a year ago when I was buying 2GB sticks as low as $20 CAD! Now the average price is $50 CAD.
What happened to Moore's law when it comes to pricing for RAM? Every other piece of hardware generally has been coming down without exception.
........
Not sure what rsync switches/options to use?
rsync -PDrphogtl
The short version would be:
rsync -Pha
I think these are really common sense options to use and probaby should be the default.
Explanation of rsync switches
P = display the progress
D = hybrid of --specials and --devices so all special and device files will be copied as well.
r = recursive (otherwise rsync won't copy files deeper than........
ERROR: sdb2/backup.r18 failed verification -- update retained.
This happened when Iwas rsyncing a dying hard drive, a lot of people seem to report this as an error with rsync itself but I don't think rsync is the issue at all.
I know the source hard drive was bad, it was having all kinds of timeout, seek, hardware ECC recovered and reset errors.
The only time something else could be the problem is if the data is being corrupted in transit, perhaps through........
This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART.
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device........
Seagate Inventory/Firmware Check
I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate.
*Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate!
Seagate Inventory/Firm........
From the package "parted" you can use the command "partprobe" to re-read the partition table. I really hate rebooting, and that's what Iloved to hear about AHCI motherboards, that they allow hotswap so you don't have to reboot. But that's only as good as the OS, if the OS does not reload the partition table you won't be able to do anything with that new drive you attached without rebooting. Yes, even without re-reading the partiton table Linux will........
You can find it for free at http://nginx.org/ I find nginx is simpler to setup than pound (it's not hard but I found it unintuitive and annoying), it seemed to make some basic setups overly complicated with the config file syntax.
nginx on the other hand is perfectly suited in everyway, it is even simpler to setup and seems to be the most stable and most efficient any load balancer. I would go as far as to say that a good nginx setup is more relia........
Before we start I take no responsibility for this, you should have a backup and if you make a mistake during this process you could wipe out all of your data. So backup somewhere else before starting this as a precaution, or make sure it's data you could afford to lose.
The RAID 1 Setup (Hardware Wise)
I've already setup my 2 x 1TB (Seagate) drives with identical partitions, make sure your new hard drive (the empty one) is setup like your curr........
The binary "iostat" comes from the package "sysstat" and is available on all Linux/Unix like platforms.
Use the "-m" option to give you what you probably want, which is to see in MB/s how much bandwidth each disk is doing.
iostat -m
Linux 2.6.24.2 ((none)) 04/16/10
avg-cpu: %user %nice %system %iowait %steal %idle
........
I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB!
I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition.
Here is what tune2fs tol........
I'm really starting to love ImageMagick, I've used it to mass convert/resize family photos with scripts and all kinds of handy things.
Today I just learned that you can create PDF files with it too, say if you have images scanned or anything else it's very simple:
convert *.jpeg output.pdf
You can replace jpg with whatever format your files are in. One thing to remember is that you can specify the order that the images/pages are added to the PDF manu........
It's basically free bash shell script available from: http://wpkg.org/email2fax/index.php/Main_Page
Make sure you have the required tools:
libtiff
ghostscript
mpack/munpack
Where you can e-mail your Asterisk box and it will fax it to the phone number in the subject line. The good news ends there, it is fairly undocumented and buggy.
Take for example how the documentation mentions you can invoke from the com........
The folder I was trying to archive is about 72GB, but much like rsync at about 17GB it chokes because of the filesize. What's with so many common and essential Linux tools having such limitations? I guess it is likely that the authors never wrote their code with the idea that files would be so large but it's still very annoying. It's important to stay on top of these limitations on production servers because I didn't realize what happened until I checked the file with "........
The last transfer I was able to do was 16.77GB according to rsync's output and it worked fine.
16.77G 100% 10.66MB/s 0:25:00 (xfer#17484, to-check=234753/256249)
But on a file over 17GB (gigs) it stalls. Trust me, it really is stalled, it's been about 8 hours with no progression from that point for some reason.
17.24G 54% 10.65MB/s 0:22:07........
In Debian based distros:
apt-get install jabber
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
fakeroot dkms
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
jabber-common
The following NEW packag........
I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find.
yum search ftp
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirrors.netdna.com
* updates: updates.interworx.info
* addons: yum.singlehop.com
* extras: mirrors.netdna.com
rpmforge........
Proxmox has made this free utility to backup running OpenVZ containers. It's a great program which is actually just a PERL script but gets the job done. This program is not 100% required because all it really does is cp -a from your container's path as far as I know but it is still good to have uniformity to how you backup your containers.
For RPM distros such as Centos/RHEL/Fedora etc.. download and install this:
wget http://www.proxmox.com/cms_proxm........
./ntfs-3g /dev/sda1 /mnt -o force
Unexpected sectors per cluster value (127).
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
This is happening on a system I've come across an HP 6930P running Windows XP Professional. The partition appears to be very norm........
All you have to do is browse to:
C:Documents & SettingsYourUserName and you'll see the following:
Inside "My Recent Documents" are of course shortcuts to the most recent documents you opened
Inside "SendTo" is your sendto, you could edit that to Send a file to a network destination, your Flash Drive........
Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics.
# # # # # # # ##### ###### # # #### # #
# # ## # # # #&nb........
heartbeat is stopped for some reason
Anyway hnode2 was active and the services are running fine but I see heartbeat has been stopped somehow.
Here is the last log I see of heartbeat:
[quote:23c84415f5]
Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: MSG stats: 9/1762471 ms age 0 [pid16738/MST_CONTROL]
Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: cl_malloc stats: 716/51784021 152624/74519 [pid16738/MST_CONTROL]
Sep 9 17:15:32........
PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist:
[code:1:1fd0f3abbe]
if (!file_exists($OPENSSL)) {
//echo "ERROR: OPENSSL $OPENSSL not foundn";
}[/code:1:1fd0f3abbe]
I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
JavaScript get valued of selected drop down l
[code:1:4be190f44a]Package = OrderForm.package.options[OrderForm.package.selectedIndex].value;[/code:1:4be190f44a]
OrderForm = Name of HTML form the SELECT is inside
package = Name of SELECT element eg.
JavaScript says form name is not defined even though it is
I've integrated this into my design and I got an error saying the Form Name i........
Javascript Get a specified element using getElementById()Great, it produces the value for whatever "id" is passed to the function.
http://www.java2s.com/Code/JavaScript/Development/GetaspecifiedelementusinggetElementById.htm
[code:1:1287ede953]
function getElement(){
var x=document.getElementById("myHead........
Javascript window.onLoadThis can be used anywhere on an HTML page, my favorite (since body onLoad is not an option for me) is to use:
window.onLoad = functioncall();
Eg. to calculate the value of a form, you want to use the onLoad at the end of the form, as things are called in order of course........
Clone any OS partition perfectlyIn one box I needed to copy the boot partition to another disk while retaining the MBR and other data.
I simply ran this command:
[code:1:1b1ff110ca]dd if=/dev/hda1 of=/dev/hdb1[/code:1:1b1ff110ca]
[b:1b1ff110ca]if[/b:1b1ff110ca] = source patition
[b:1b1ff110ca]of[/b:1b1ff110ca] = destination partition
Here's an interesting article on it
http://www.rajeevnet.com/hacks_hints/os_cl........
GRUB Boot FreeBSD[code:1:a7050277b7]title FreeBSD 6.0
root (hd0,2,a)
kernel /boot/loader[/code:1:a7050277b7]
Just insert the above code into GRUB's [b:a7050277b7]menu.lst[/b:a7050277b7] and make sure you set the root path correctly.
[quote:a7050277b7]Let's quickly explain what the root (hd0,2,a) means:
*hd0 stands for the primary master drive
*2 stands for partition 3
*a stands for the........
SSH automatic login without passwordlocal> ssh-keygen -t rsa -f .ssh/id_rsa
-t is the encryption type
-f tells where to store the public/private key pairs. In this case, the .ssh directory on home is being used
A password will be asked; leave this part blank, just pressing
Now, go the .ssh directory, and you will find two new files: id_dsa and id_dsa.pub. The last one is the public part. Now, copy the public key to the serv........
Mount Linux ext2 file systemNormally in Linux you could mount ext2 or ext3 etc... like this:
mount -t ext2 /dev/hda1 /mnt/hda1/
In FreeBSD the difference is of course the disk naming conventions (hda1 would be known a /dev/ad0s1):
To mount ext2 in FreeBSD just type:
mount -t ext2[b:68c16c60bf]fs[/b:68c16c60bf] /dev/ad0s1 /mnt/ad0s1........
Asterisk FreeBSD compile problemsI couldn't get it to compile without using the following options at compile time:
[b:b7d672ee28]
make install WITHOUT_ZAPTEL=YES WITHOUT_MYSQL=YES WITHOUT_FAX=YES WITHOUT_ODBC=YES WITHOUT_H323=YES[/b:b7d672ee28]Some problems you might have with copying over your Linux config files to FreeBSD is different paths.
[b:f044931f41]For example the etc path for Asterisk on BSD will now be:[/b:f044931f41]
[qu........
Photoshop Center A SelectionYou should have the item in it's own layer, select the layer and use CTRL+A to select the layer.
Then look for the alignment controls near the top of the screen (under the menus)
Use the Horizontal Center and Vertical Center and then your item will be perfectly centered.........
Problems surfing web/servingI noticed sometimes websites wouldn't load at random through a FreeBSD box and other systems on the same link didn't have the issue. I believe it is because of the low default limit of 128 TCP connections that caused the problem. It would also slow down any traffic that requires many connections such as Bittorrent.
The fix is to increase the amount of connections to at least 1024
Edit [b:520b050d3e]/etc/sysctl.conf[/b:520b05........
Nice General Linux RAID 1 GuideFull examples/tutorials that should work for any Linux system using GRUB or LILO as the boot loader.
This is the only tutorial I've seen that clearly shows how you can convert an existing non-RAID system to software RAID1 remotely, without ever having to be at the computer. This is important for people who co-locate or rent dedicated servers that they may not have physical access to in a timely manner.
https://alioth.debia........
Live E-mail VerficationTwo very cool tutorials that actually connect to the supposed mail server of whatever address the user specifies to see if the e-mail address actually exists.
http://www.devshed.com/c/a/PHP/Email-Address-Verification-with-PHP/
http://www.zend.com/zend/spotlight/ev12apr.php?article=ev12apr&kind=sl&id=1782&open=1&anc=0&view=1#notes........
How to extract files from RPM & SRPM filesmkdir any_directory
cd any_directory
rpm2cpio /location/of/package.src.rpm | cpio -d -i
This will extract all files, I find it especially useful if you want to manually compile the kernel source from the srpm........
Centos 4.3 x64 & VMWare Server Beta[code:1:6d0b2c8c2f]
The correct version of one or more libraries needed to run VMware Server may be
missing. This is the output of ldd /usr/bin/vmware:
linux-gate.so.1 => (0xffffe000)
libm.so.6 => /lib/tls/libm.so.6 (0xf7fbd000)
libdl.so.2 => /lib/libdl.so.2 (0xf7fb9000)
libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fa7000)
libX11.so.6 => not f........
locate: command not found (slocate database needed)For some versions especially older ones like 3.x they might not have the "slocate" database.
Meaning a "locate somefile" command doesn't work.
Just install "slocate"
[code:1:d6d717421c]yum install slocate[/code:1:d6d717421c]
Then run:
[code:1:d6d717421c]updatedb[/code:1:d6d717421c]
And you're good to go :)........
Telus + 2Wire 2700 Router HorribleWell first of all let me say this is the only router/switch that sometimes seems to crash/disconnect computers on the local network.
This device also thought it would be smart to block VOIP packets coming from my Sipura ATA VOIP adapters so I disabled the [quote:cb89ba7bff]"Invalid TCP Flag Attacks (NULL/XMAS/Other)"[/quote:cb89ba7bff] option
Then all of a sudden I couldn't get onto any web pages, the wireless........
Need identd for port 113 ? Install authdyum install authd
Happy identing :)Actually it's not that simple.
It installs as an "xinetd" service and is disabled and turned off by deafult.
To enable it run:
[code:1:8c94df8319]
chkconfig --level 3 auth on
service xinetd restart
[/code:1:8c94df8319]
This will set identd aka authd to start by default.
service xinetd resta........
Roxio Easy Media Creator "Could not complete last comma[b:2e4e25672a]"Could not complete the last command because: Unknown error"[/b:2e4e25672a]
When I try to burn an .iso image by double clicking it and allowing Roxio to open up "Disc Copier" I get a bunch of those messages.
It's annoying and not really awe inspiring!........
Roxio/Sonic complaints - No verification of burnt ISO ImageThe only thing Nero does better is that it has the option to verify the data written from an ISO/CD Image!
Why can't all burning utilities have this feature?........
Updating yum repos for DAG /etc/yum.repos.dIn /etc/yum.repos.d
[quote:96456b2ab9]Create any file such as "CentOS-Dag.repo" in /etc/yum.repos.d[/quote:96456b2ab9]
Add the following to the above file:
[code:1:96456b2ab9]
[dag]
name=Dag RPM Repository For Red Hat Enterprise Linux
baseurl=http://dag.atrpms.net/redhat/el$releasever/en/$basearch/dag/
http://dag.freshrpms.net/redhat/e........
SSH Public Key Authentication (Login Without Passwords)I've gone over this before but just a quick note!
the "authorized_keys" file in ~/.ssh
must be chmodded to "600" or public key authentication won't work.
I guess it's kind of a security/failsafe feature that I've
seen on all Linux and Unix OS's........
Linux Unix Xorg X Server Intel Extreme i810 Graphics Problem(EE) I810(0): No Video BIOS modes for chosen depth.
(EE) Screen(s) found, but none have a usable configuration.
I have a new Dell PC with one of the latest Intel Extreme Graphics on-board crap. From what I can see any Linux/Unix/FreeBSD versions running XFree86 or Xorg from years ago or the latest version today will have this problem.
It's easily corrected FOR MOST people. Go into your........
Xorg fonts missing Xorg.0.logThis happened on a PCBSD installation but it could happen on any Unix/Linux Xorg installation:
If the text on your screen is too small and you're running at a high resolution if you do a
[code:1:04ca0d3455]cat /var/log/Xorg.0.log | more
[/code:1:04ca0d3455]
You'll see a bunch of fonts missing, specifically the 75dpi and 100dpi ones that you really need :)
(WW) The directory "/usr/X11........
Crontab Tutorial - Tips & Shortcuts*/5 * * * * /command
The above is an example of a command that runs every 5 minutes.
Normally instead if the "*/5" you'd have to type
"5,10,15,20,25,30,35,40,45,50,55" etc...
You can use it to run a program every 5 days, 5 months 5 years etc...Crontab run one a day at a certain time[code:1:7a3bd32dfa]0 1 * * * /home/backupguy/databackup.sh[/code:1:7a3bd32dfa]........
How to compile in Windows/DOSMingW is a free compiler project so start here:
http://www.mingw.org/download.shtml#hdr2
I downloaded the core GCC compiler:
http://prdownloads.sf.net/mingw/gcc-core-3.4.2-20040916-1.tar.gz?download
But it's missing even the standard C runtime libraries like "stdio.h"!
You may also need to add environment variables from the DOS command line.
Here is a simpl........
E-mail (Thunderbird) with GnuPG encryptionThis is great tool for Mozilla Thunderbird which allows you to encrypt your e-mails so only you and the receiver can view it even if the e-mail is intercepting or obtained by another person.
The only small catch is that you of course have to install an extension to Thunderbird and then configure each account you want to use it with. Really it can probably all be done in a few minutes and the effort is worth it.........
DVD Burners and Media at an all time lowThis is crazy you can buy a nice Pioneer DVD burner for like $64 CAD now and good media like 50PC Maxell is just $25.97 at Walmart.
I'm liking this. Time to make double archives of important data :)........
Vonage & Linksys Offer Trade-In ProgramVonage & Linksys Offer Trade-In Program
Monday, June 13 @ 09:22:36 PDT
Vonage is offering customers a way to get a free 802.11g router when they turn in their old one.
advertising
For a limited time, customers can trade-in their used router any brand, any model for a Linksys Wireless-G Router with 2 Phone Jacks for broadband telephony (WRTP54G) for free (after rebates), when they si........
The New Chips on the BlockThe New Chips on the Block
By Bruce Gain
Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html
02:00 AM Jun. 13, 2005 PT
We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........
Intel's Finnish FetishIntel's Finnish Fetish
By Dave Mock
June 13, 2005
Chipmaker Intel (NASDAQ: INTC) has successfully topped the personal computer market for decades. Breaking into related areas such as communications has been much difficult for the world's largest semiconductor maker. But a new partnership with Nokia (NYSE: NOK) could help to change that.
Intel's forays into cellular-phone and home-entertaiment-device chips have........
Intruder detection device uses behavioural analysisIntruder detection device uses behavioural analysis
by Antony Savvas
Monday 13 June 2005
Symantec is introducing a new intrusion detection product that uses behavioural analysis to block potential attacks on enterprise networks.
The new Critical System Protection 4.5 system uses technology that Symantec acquired through last years purchase of Platform Logic. It is designed to protect deskt........
Become your own ISP!http://waverider.com/
I would link to the exact product I am mentioning but it's under Products/5.8Ghz because I can't find the exact URL because of their annoying javascript and frames (you'll see what I mean).
The exciting thing is that this unit can supposedly be up to 72mbit, it is NOT line of sight and the range is up to 20miles. I wonder how real world speeds and range would actually be and if it is reliable.
I j........
Asterisk Agent Login ProblemUsing the AgentCallbackLogin function I couldn't login
I knew I had my agents setup properly in agents.conf so why couldn't I login?
The reason is because agents.conf was missing the [b:994d7a34af][agents][/b:994d7a34af] context!
I just added [agents] above the existing agent declarations and then I was able to login as expected.
It took a lot of figuring out and reading though!........
Asterisk Queue Context ExplainedThis was never explained in voip-info or any other site I read.
It is understood you can escape to a context from a queue and how to specify it.
[b:882f1e0aee]
What is NOT mentioned is that the context= you specify within the queues.conf refers to a [i:882f1e0aee]context that exists in extensions.conf[/i:882f1e0aee][/b:882f1e0aee]
This will save you headaches if you need to escape from the queue :)........
MySQL Server 3.23 won't start after switching from 4.1I was using a 4.1 alpha version of mysql-server and some how version 3.23 of the client and 4.1 of the client were also both installed!
So I forced uninstalled everything because after trying and trying even though MySQL server was using the short 16byte password authentication I got some other errors.
After trying with the ports and having it fail because I had existing database data I force installe........
FreeBSD Desktop OSsI would probably choose these over Linux.
In many ways these are probably more stable and just as easy to use as any Linux distros but the benefit of stable, updated and secure packages!
PC-BSD - http://www.pcbsd.org
DesktopBSD - http://www.desktopbsd.net/index.php?id=37
Personally PC-BSD is Beta at this point and is not easy if you are installing it on a non-primary partition.
I have not used Deskt........
Mounting NTFS in UnixJust a quick tutorial to mount your NTFS volumes in Unix (FreeBSD/Linux)
[quote:4a9de7bf80]mount -t ntfs -o umask=0 /dev/your_partition /mnt/your_mount_point[/quote:4a9de7bf80]
[b:4a9de7bf80]-o umask=0[/b:4a9de7bf80] is to ensure all users can access the mounted partition (otherwise don't use it and only root can access the mounted partition)
[b:4a9de7bf80]-t ntfs[/b:4a9de7bf80] is simple because it just lets mount kno........
PHPBB Drop All TablesSQL Syntax:
[quote:75acd496c1]drop table phpbb_auth_access, phpbb_banlist, phpbb_categories, phpbb_config, phpbb_confirm, phpbb_disallow, phpbb_forum_prune, phpbb_forums, phpbb_groups, phpbb_posts, phpbb_posts_text, phpbb_privmsgs, phpbb_privmsgs_text, phpbb_ranks, phpbb_search_results, phpbb_search_wordlist, phpbb_search_wordmatch, phpbb_sessions, phpbb_smilies, phpbb_themes, phpbb_themes_name, phpbb_topics, phpbb_topics_watch, phpbb_user_group, p........
MySQL SELECT with multiple where conditionsI can get a match on rows for now apparent reason
[quote:09cf04e097]SELECT * FROM TABLE WHERE field = 'value' & value = 'field'
[/quote:09cf04e097]
To make it work as expected use 'AND' instead of '&' they seem to have a completely different and unexpected effect.
[quote:09cf04e097]SELECT * FROM TABLE WHERE field = 'value' AND value = 'field'
[........
MySQL SubQueryI was trying to do a sub-query here but it wouldn't work (Syntax Error) in MySQL for some reason even though based on the SQL standards it should be ok.
[i:1268bfa39e][b:1268bfa39e]I found the reason this doesn't work. I am using MySQL 3.23 and I read on the MySQL web site that versions before 4.1 DO NOT SUPPORT SUB-QUERIES so it showed me how to rewrite the following as a LEFT join instead of a sub-query.
[/b:1268bfa39e][/i:1268bfa39e]........
Bash Script Infohttp://www.faqs.org/docs/Linux-HOWTO/Bash-Prog-Intro-HOWTO.html#ss10.5
http://www.scit.wlv.ac.uk/~jphb/spos/notes/shell/shell5.html
http://quong.best.vwh.net/shellin20/#LtohTOCentry-41
http://www.cactus.org/~dak/shellscript.html
http://db.ilug-bom.org.in/Documentation/abs-guide/
http://pegasus.rutgers.edu/~elflord/unix/bash-tute.html
http://heather.cs.ucdavis.edu/~matloff/UnixAndC/Unix/CShellII.html
Since bash i........
Package managementIf you're like me and often like using an older version you'll need to know this.
Since all 5.x versions no longer have packages of their own you'll have to use the 5-stable
The best way is to set the [b:d5e8972240]packagesite environment variable[/b:d5e8972240] like so in your [b:d5e8972240].profile [/b:d5e8972240]file
[quote:d5e8972240]vi /etc/.profile[/quote:d5e8972240]
Add this:
[code:1:d5e897224........
CVSUp the Easy WayIf you're reading this you probably have never used CVSUp or don't know how.
CVSUp can be used for two things or just one if you prefer.
*Keeping your kernel up to date
*Keeping your port list up to date
Start by editing the following file in:
[b:76928b387d]vi /usr/share/examples/cvsup/cvs-upfile[/b:76928b387d]
It can be quite overwhelming with all the crazy options.
Basically there are only 3........
Windows Media PlayerJust one little question... and I'm not too sure if it falls into the hardware category... my Windows Media Player...or any music program for that matter buzzes at random and cuts out the music. But I don't think it's the music files themselves because I've put in regular CD's and have had the same problems. Any ideas on what the problem could be?Sounds like a soundcard/driver issue.
I would recommend updating your soundcard driver i........
CDR Manufacturers - Why is so much media bad?I have searched for good media and tried many kinds for years. I guess I'll try to summarize my findings and conclusions.
Dye is irrelevant, dye of any color can be good or bad, it more likely depends on the manufacturer.
Speaking of manufacturers, the name at the top of the disc means nothing. For example, Memorex along with any other 'brand' is actually always made by another manufaturer including CMC Mag........
It's not all about the speed.I'd also thought I'd mention that speed is not everything. Routing is the key, because if one router you hit is slow then it doesn't matter how fast your connection is. I have found that locally, Telus has much better routing than Shaw (although I have not yet tested their new DOCSIS network).
There are also some countries such as Sweden that offer high speed connections, but the high speed only applies locally. The reason is that man........
African money SCAMI have received countless of these sorts of emails where the person claims to be from an African nation which has a deposed finance minister or some other strange situation which puts millions of dollars at their disposal.
The only problem is that they need a partner to get the money out. And they have entrusted only you, yes that's right, to donate your bank account information along with SIN number so they can secretly wire the money over and you w........
Link Exchanges- Friendly AdviceI just wanted to make aware to the public who are paying to use Link Exchanges to get heavier traffic online and boosting their page rank in Google. Please be advised that this type of 'exchange' can very well get you booted off of Google and blacklisted by them! It's happened to many people and it's a very important tip. If you are on a Link Exchange, and have not been booted off yet; you MAY. Google is very smart and eventually they catch on. ;) Be ca........
Use Mozilla Firefox, not Internet Explorer - You'll be glad!Hey guys,
I just thought I'd recommend that everyone switch to Mozilla Firefox as their web browser. You can find it at http://mozilla.org
It is free and it is much better than IE. It has a built-in popup blocker which works great and most importantly, it doesn't have a million critical security flaws which could compromise your security such as passwords for on-line banking etc..........
NEC ND-3500A is great!I just picked up an NEC 3500A a few weeks ago and I love it.
It is a great all in-one optical drive solution.
It can burn DVD/+R-R at up 16x, read at 16x and rewrite at 4x and CD-R at up to 48x!
Not bad, but the impotant part is that it delivers consistent high quality burns and the drive is as quiet as I could ask it to be.
It's also convenient that it has a lot of hacked firmware for overspeeding of........
Basic Port ListingHopefully someone finds this useful or at least interesting.
http://www.sans.org/top20/#u9
Name Port Protocol Description
Small services ........
Intrusion Detection ResourcesI think this could be very useful even for home users in learning how to secure their networks or even offices.
http://www.sans.org/resources/idfaq/........
My list of handy security links - Ongoing[b:6f8d25be68][size=18:6f8d25be68]News[/size:6f8d25be68][/b:6f8d25be68]
Security Focus http://www.securityfocus.net - Nice Security News Site
CERT http://www.cert.org/
Common Criteria (see if your OS/software is EAL4 certified) EAL(Evaluation Assurance Levels is the industry standard for evaluation of security in software) http://www.commoncriteria.com
[size=18:6f8d25be68][b:6f8d25be68]Tools[........
Other Security Web SitesSeveral websites actively track security issues. This list provides you with the major providers
of security information on the Web. Many of these organizations also provide newsletters and
mailings to announce changes or security threats:
Center for Education and Research in Information Assurance and Security (CERIAS)
CERIAS is an industry-sponsored center at Purdue University that is focused on technology and
relate........
Nice Search Engine Optimization Toolshttp://searchenginewatch.com/facts/article.php/2156041
I quickly checked this out and I like the Google tool that helps you determine the popularity of certain keywords and then it gives you other related search terms that those people used to search with.
Excellent :)........
Telus Begins Enforcing Bandwidth CapsIt appears Telus has begun to send e-mails out and is planning on enforcing bandwidth caps of only 10gigs/month for their 1.5mbit plan and 20gigs/month for 2.5mbit
The state of Canadian ISPs is horrible :(
In the east coast, Bell Sympatico will allow you to have unlimited bandwidth and even Aliant will and they have 3mbit for a much more affordable price than our 2.5mbit on Telus.
Telus needs to get wit........
InnoSetup is something Ijust realized many commercial developers use for installation. Why? Because it's100% FREE, simple, and efficient to use.
The maker has really done a great job and the installer basically works on all versions of Windows since 95.
I'll keep this in mind the next time I code a Windows application since it's been years for me.........
gnuCash is available for all main platforms, Linux/Unix, MacOS (FreeBSD anyway), and Windows.
You can download gnuCash free from here.
It does seem to be fairly full featured and somewhat straight forward, but like so many programs it is missing a few key features or things don't work quite right.
It doesn't support importation of CSV files, which is a big minus. And the developers rather than wanting to add support have just dec........
Linux Kernel v2.6.30.3
102220 blocks
CHK include/linux/version.h
CHK include/linux/utsrelease.h
SYMLINK include/asm -> include/asm-x86
CALL scripts/checksyscalls.sh
CHK include/linux/compile.h
CC drivers/net/igb/igb_main.o
drivers/net/igb/igb_main.c: In function `igb_up':........
NewEgg is one of the few companies that stocks this great right angle 1U SATA power cable. I've purchased some no-name ones and they face the wrong way (towards the bottom of the chassis) which makes it worse/impossible than standard SATA connectors.
The price is high but if you're building a 1U server and want SATA disks and don't have much space (eg. the 1U Supermicro cases) then these are simply a must and........
I have played around with Pound a little bit. It is a reverse proxy and load balancer in one, and it can be used as only a reverse proxy if you like. It is very simple to configure as either, and Pound even senses if one of the systems is down and stops sending requests to the dead server.
It supports SSL (but passes the request to the destination server unencrypted) and even the Apache log format. Pound is very simple, fast a........
The "Geoip" package is available on virtually all Linux and Unix like systems and is very handy in looking an IP address' corresponding country.
The homepage of the maintainers is here.
They also have a package called "Geocity" which can be downloaded from their site, it is still free and gives you a close indication of the city the visitor is from. You can........
This is a very weird, annoying and bizarre quirk with many distributions, especially Debian. The home and end keys don't work, but it's a simple fix as long as you found this article :)
You just have to edit /etc/inputrc:
Find the commented lines as shown below:
# "e[1~": beginning-of-line
# "e[4~": end-of-line
*If you can't find the above, just copy and paste the code below into your inputrc, it will en........
Shortcut/Easiest Way To Create A Self-Signed Key:
openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key
Using the above, you instantly create a self-signed certificate valid for 1530 days and you can simply skip to step #5.) below.
If You Need a Real SSLCertificate (eg. Equifax/Openssl) then you need to create a CSR request (you'll need to follow Steps 1.) and 2.) in order to create the CSR. You then upload the CSR Certi........
This happened with a select statement which writes the result to an external file. I didn't remember the privilege "FILE" must be granted on *.* for this to work successfully, it wasn't actually an authentication issue as it implies since I was already in the SQL prompt and doing the query.
SELECT some_id
FROM sometable
INTO OUTFILE '/tmp/result.txt'........
I've gotten this error enough to bother posting about it, because I've come across so many servers where this happens, so what could "Error 28" possibly mean? Is your database corrupt, or is this a sign of a RAID failure/corruption or even worse, bad blocks on a clients system who has no RAID and never took backups?
No, check your free blocks, it simply means you have no space. This was the result of a script that was overzealous and backed up the entire database........
top - 09:34:12 up 2 days, 20:57, 2 users, load average: 1.83, 1.99, 2.03
Tasks: 59 total, 2 running, 57 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.3%us, 0.0%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st
That 99.7% wa is iowait, it means the server is waiting for a process to complete an IOoperation or in plain English, there is a delay in........
I wanted to disable the "Administrator" account for security purposes and Iread some "guide" on the internet that recommended that we run "C:WindowsSystem32sysprepsysprep.exe /generalize". I also clicked the option for "Generalize" and the computer rebooted and gave some OOBE error and restarted, and now I get the error above no matter what.
I read that some drivers such as ones from AVIRA AV can cause this because they're unsign........
I didn't find any useful information that actually fixed this. My VPS was in the "Running State" and I could not stop or restart it. I kept getting "Container already locked" no matter what Idid (I tried all the suggestions in the Google results for this error).
Most of the suggestions were for Windows but I only use Linux. The other solutioins also said to restart the VZ service or even the entire hostnode and this was not acceptable to me........
This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far:
You can purchase an "M-Zone" China Mobile pre-paid SIMCard from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all. At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........
I was starting to panic because suddenly my 1TB Seagate SATA drive wasn't working,I thought it was a BIOS issue because it seemed to have happened after I tried overclocking my Desktop too much.
I tried powering down and waiting, but I still couldn't hear the drive spin up at all. I tried a second 1TB hard drive and it wouldn't work either. I checked all power connections again and again until one of the pins in the MOLEX connector popped completely loose.
Th........
You can see the problem below, GRUB recognizes my hard drive and sees the partitions but cannot access them. This is from the GRUB boot disc I'm using.
What happened is that I had some power issues causing this system's power to be interrupted several times and basically an on/off on/off situation.
The system won't boot, I just get a flashing cursor and no message or error from GRUB. Obviously the problem is that my MBR seems corrupt or some other issue.
My........
The results are still not flattering and are nothing close to native performance. Unless GlusterFS has a "DRBD-like" option to delay writes over the network and to only read from the client side, I don't see how performance can ever improve much more.
After doing some client optimizations Iadded more to the score:
Start Benchmark Run: Sun Nov 29 00:37:44 PST 2009
00:37:44 up 3 min, 1 user, load average: 0.01........
I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems.
DRBD
I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........
You might remember my original GluserFS/OpenVZ benchmark which produced a horrible 29.8
This is the exact same system, but using the latest 2.0.8 (with some small files patch which speeds up performance) you can see it is about 25% faster.
I also haven't tuned my config files at all, but there are some settings that should increase performance on small files which I believe i........
Loaded plugins: fastestmirror
rpmdb: mmap: No such device
error: db4 error(19) from dbenv->open: No such device
error: cannot open Packages index using db3 - No such device (19)
error: cannot open Packages database in /var/lib/rpm
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py&qu........
Inever saved any of the logs, but basically no matter what OS (Linux)I used, I could not get my 1000GB hard drive to work (Seagate SATA). The BIOS recognizes the drive and fdisk -l shows the hard drive as it should.
The tricky thing is that different OS's will give you different results, but don't be fooled. You can't use these larger drives for long. Iwas getting all kinds of seek/IOerrors and also messages that the port could not be read.........
Itried everything Icould think of, and of course even with the NIC enabled in the BIOS nothing was working. The light would flash when you plugin the cable for a second, but that's all.
Due to another issue I'm about to post about (server is not compatible with 1TB/1000Gig Hard Drives), I updated the BIOS. I didn't even know the 100mbit NICs were not working untilI decided I should test each NIC one by one.
Inoticed that only 1 server out of........
This is very disappointing since GlusterFS markets itself as a solution to deploy VPS servers on. On the HNitself I get a Unixbench of about 360.
I'm also using an SSH tunnel to secure the communications, but even before that, things seemed very slow.
# # # # # # # #####&n........
Have you ever seen this dreaded message in your Apache/HTTPD /var/log/httpd/error_log?
[error] server reached MaxClients setting, consider raising the MaxClients setting
The error itself is slightly misleading. Ibelieve this happened to one of my servers, I found Apache was running still, and that you could telnet to port 80 but no respnose would be given.
For some reason my error log initially did not have the above error, but after a restart I saw........
A VPS Server I had just wasn't working right, code that I migrated there just wasn't working. For example, it kept telling me the connection to the database was unsuccessful, halfway through iterating through results it already had.
Then I realized it wasn't my code. Ichecked my /proc/user_beancounters and found this:
cat /proc/user_beancounters
Version: 2.5
uid resource held maxheld barrier limit failcnt........
It's actually very simple and "grep" makes it as easy as possible. I'll outline a few common scenarios and provide some examples.
Say you want to search ALLfiles within the current directory (and inside/deeper) for the text "phpinfo()"
grep -R "phpinfo()" *
If you want to search only certain files such as only .txt you would do this instead:
grep -R "phpinfo()" *.txt
As you ca........
Backing MySQL Databases
Backing Up/Dumping All Mysql Databases To A Single File
mysqldump --all-databases -u admin -p > allmysqldatabases.sql
The "-all-databases" clause is pretty obvious isn't it? It means that it will backup all databases.
The "-u admin" means login using the user "admin", if you h........
There is a tool called "xml2" which will parse both HTML and XML scripts, this is very useful to do a mass extraction or conversion of data based on say an HTML table etc..
It becomes even more powerful using bash if certain tags are identified with a certain class="" attribute or something else unique to only the tags you want.
Happy parsing.........
Here is an example that I recently found, most PR checkers will say this domain is PR8 or will say "cannot analyze PR".
The example is domain "bonserotica.com" view Google's cache of the homepage and you'll see as in the picture below, it lists a different URL, which means they used a redirect to a high PR site to fool you and the PR checkers.........
Has Apple tried to give a golden egg to the cell phone companies? Has anyone noticed that if you set your lock time to x minutes, the phone doesn't just lock, it goes into standby. When it does this, any WiFi connection you have gets dropped and all push/data functions such as e-mail checking are done through the 3G network.
There is no way to change this feature and functionality and it's very annoying, especially if you are downloading something or loading files over the........
You need to jailbreak your phone and inside Cydia you'll find "PushMod" which will allow you to set your mail check time to 1 minute instead of 15-minutes.
This is a great mod and has saved me a lot of stress and frustration, the lack of Blackberry style "free push service" makes iPhone less attractive, but this solves that.
Apple needs to make mobileme free and have a Blackberry style chat network to compete, I'm not willing to pay for something Blackberry........
First of all, the iPhone is crippled in many ways, but most of my complaints about functionality have been addressed through the jailbreak, Ican run apps in the background of my choosing, I can install a terminal, acccess my phone through SSH and SCP and so much more.
It even addresses the 15 minute e-mail problem, I installed a program called "PushMod" and now set the checking time to just 1 minute.
Apple should really thank the developers for this gift, it ma........
Apple crippled the iPhone by not allowing multi-tasking of the non-primary apps. I use SSH a lot and I don't want to close my session just to check my e-mail, etc, now an app found in Cydia called "Backgrounder" allows just that.
Although it's not perfect, we installed the correct one for "3.x" iPhones and hit "Reload SpringBoard" and the hour/circle glass has just been going for minutes.
It seems like it installed fine even with the crash t........
Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore.
A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly.
In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........
Yes, Iadmit I finally got bitten by the hype as much as I can usually see through it all. Keep in mind this review is of the "stock" phone, no jailbreaking yet which is what really unleashes the customizability and whyI bought iPhone.
I had better things to say about this phone before buying it, and it is a great phone, perhaps the best on the market by far, if not because of the Mac OS port onto the iPhone and all the apps, etc, etc.
With that said........
This is unfortunate and frustrating as many sites use it, a lot of people are frustrated that TinyMCE does not work on the iPhone Safari browser.
Apparently the developer of TinyMCE's answer is "talk to Apple about it"
It's really frustrating although, I wonder if any other mobile phones are able to use TinyMCE or not, whatever the case is it would be nice to find a solution to use TinyMCE on the........
Iused to get all kinds of weird annoying characters like "" during compilation with gcc especially.
example:
dmg2img.c:456: error: BZ_OK undeclared (first use in this function)
dmg2img.c:471: warning: implicit declaration of function BZ2_bzCompressEnd
dmg2img.c:482: warning: implicit declaration of function BZ2_bzDecompress
dmg2img.c:484: error: BZ_PARAM_ERROR undecl........
The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso
I'll only cover theLinux version although the Windows pre-built binary works the same way.
Download dmg2iso here for free (from the author's website)
It's just silly and doesn't make sense that Ubuntu doe........
As much of a computer nerd as Iam, I'm usually a late adopter to technology for a few reasons. Ifeel most new hyped technologies and electronics are mainly fads, and I'm also cheap.
Adopting later means you avoid the bugs, kinks and most importantly pay the lowest price, that's me being cheap again :)
I never read much about the iPhone but Isaw all the hype around it and until recently I wasn't a big fan of anything Apple until a few years ago I realize........
I've had an old Blackberry for a few years and I was ready to spend some serious cash on a nice Nokia. I love the idea of the Linux based Symbian S60 OS, so I was looking at phones like the E63, E71 (both are basically the same, at least CPU/screensize although E71 is thinner, has a 3MP camera, has GPS, and has dedicated buttons to adjust the volume).
Then Iheard about the N97 and what a revolution it was supposed to be and it was even compared to iPhone.
To........
This is the Intel Atom 330 motherboard with integrated Realtek Gigabit NIC (Intel Desktop Board D945GCLF2 Motherboard W/ Atom 330 1.6 GHz Dual Core Processor - Mini-ITX)
I cannot achieve more than 15 MB/s, even doing a local transfer through eth0 to it's own IP.
100% 95MB 15.9MB/s 00:06
So this is not a cabling, switch or hardware issue, it seems like a driver or chipset limitation problem.
Here is my........
Icouldn't understand why on one system it took a few minutes to get the SSHlogin prompt when connecting to other systems. The other systems all had the UseDNS parameter set to no, which almost always resolves the login prompt delay.
The reason is Ubuntu and perhaps Debian and other distributions /etc/nsswitch.conf file
Edit yours to have the "hosts" line like so (notice that files and dns are the primary resolution choice........
resume: could not stat the resume device file
I got that after migrating to a different physical hard drive, it wanted to resume from a swap partition that no longer exists.
This is actually controlled by "uswsusp.conf" in /etc
Just edit it and remove the device or change it to the correct new swap file.........
Igot this after copying a VMWare image onto another machine in Debian.
SIOCSIFADDR No such device eth0 error while getting interface flags
The solution
1.) Find and edit the device line in persisent-net.rules note it will be prefixed with something like z25 or something else.
vi /etc/udev/rules.d/z25_persistent-net.rules
The easiest way is to comment anything out.
If you are feeling........
When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it.
More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things.
Output of /var/log/messages for OCFS2
Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........
Server not using user level security and no password supplied.
tree connect failed: NT_STATUS_WRONG_PASSWORD
That happens when trying to use smbclient to connect to a share. The weird thing is that I can authnenticate just fine from Windows XP.
It is partially my mistake, I forgot this share does have a password. I've tried authenticating with the correct user and also with "Guest" because this works in Windows. In Linux I ........
There's a lot of information and guides on OCFS2 for RHELand Centos Linux but the package setup and configuration is slightly different and this has thrown some people off.
Installing OC2FS
You should install the following packages to get started:
apt-get install ocfs2-tools ocfs2console
Configure OC2FS
In RHEL/Centos the main configuration file is located in /etc/sysconfig/o2cb
However in Debian based Linux it is located........
This will give you the basic info needed to browse and connect to Samba shares from the command line. From the GUI of Gnome or KDE etc, it is pretty standard and straight forward. However, I've found very little guides on how to do it from the command line and if you're like me, a nerd who prefers command line for its simplicity and for remote use, this is the way to go.
First get a list of all the Samba/SMB shares on the target.
smbclient -L hostname........
I've read a lot of people complaining that their 1U servers are too loud for the office, home or whatever strange places people might want to put them.
Whenever Isee the question asked, "what can be done about the noise", you'll see a myriad of silly answers like "you shouldn't have it at home or in your office at all", "1U servers are meant to be loud".
These all might be valid points but they're not the solution. A good example is a........
Ithink there has been a lot of negative press towards Rackable Systems. We will give their new solution credit that it is marketed very well, and comes prepackaged and ready to go.
But let's cut through the hype of both sides, the people who love this concept and the people who hate it.
What Rackable Systems have done is a first, to minimize space, power and costs into small servers. This is great, and many companies have already built their own servers based........
((: 08: value too great for base (error token is "08")
Here is the code that caused it for ((track=1;track ........
This happened on one of my Ubuntu machines where Igot some kind of segfault on line 21 from LAME at random while encoding MP3s (a second try is fine usually). I've read that it's best to compile it from source and that has solved most issues for people.
Here is my preferred configure line:
./configure --enable-mp3x --with-fileio=lame --enable-debug --with-vorbis
Even with that I got a different error this tim........
There's a lot of outdated information and confusion for system administrator's out there.
One annoying task for many an Administrator has been backing up data in Linux. You don't need any GUI tools such as K3B or GnomeBaker. Both are excellent tools but for veteran command line users working remotely, using the keyboard is a great and possibly automated way to save yourself pain and hassle.
At a later date we'll cover how scripting can automatically backup certain........
We've noticed in many ways that traditional networking even in WANs and LANs has changed very little. Years ago most networks were running on 100mbit and today most still are.
Even the average internet connection is largely unchanged from several years ago with some minor exceptions from Europe and Asia.........
We have years of knowledge with technology, especially in the IT (Information Technology)industry.
realtechtalk.com will always have fresh and useful information on a variety of subjects from Graphic Design, Server Administration, Web Hosting Industry and much more.........