If you are using the default "Image Viewer" aka Xviewer it seems to die on very large resolution files. It seems to understand to scale them but the printer will try to print and then fail.
Using "Pix" viewer seems to fix this and causes these larger files to print just fine.
........
If you can print other PDFs but not a particular one it is very likely that the PDF size is A4 (the longer, skinnier Asian paper size) instead of the North American letter size ( 8.5" x 11"). This breaks printing in most cases. Or it may print if you find a program that ignores the size issue.
Here is an example of an A4 being rejected by a printer in Ubuntu Linux via CUPS
Cannot print PDF CUPS Samsung C460:
Processin........
This is all controlled by /etc/issue
You can basically enter anything in there that you like, but there are preset variables that are mentioned at the end of the page that discuss this.
Some examples of /etc/issue:
Centos 7:
S
Kernel r on an m
Ubuntu 16.04:
Ubuntu 16.04.6 LTS n l
You can also insert any of t........
It is very silly but the default on the ifup-eth script tells dhclient ( the program that obtains a DHCP IPaddress if you have selected DHCPin your ifcfg-eth* config file) to EXIT / QUIT if the first attempt to obtain a lease fails.
No amount of dhclient.conf settings will fix this because if dhclient is started with -1 (which it is by default)then dhclient will quit.
This is obviously very bad for MOST cases. Say for example you have a power outage or........
Oct 18 11:06:46 server systemd[529]: rc-local.service: Failed at step EXEC spawning /etc/rc.local: Exec format error
Oct 18 11:06:46 server systemd[1]: rc-local.service: Control process exited, code=exited status=203
Oct 18 11:06:46 server systemd[1]: Failed to start /etc/rc.local Compatibility.
Oct 18 11:06:46 server systemd[1]: rc-local.service: Unit entered failed state.
Oct 18 11:06:46 server systemd[1]: rc-local.service: Failed with result 'exit-code'.........
Just edit your tftp file for xinetd like this:
*Change the IPto be the IPof the interface you want to listen on.
To test if your tftp is available on a certain IP range use nc -u yourip 69 to see if you can still connect (/var/log/messages or /var/log/syslog) should show the connection if it is open.
Oct 13 23:20:34 01 xinetd[26631]: Started working: 1 available servic........
sudo pip3 install python-docx
[sudo] password for :
Downloading/unpacking python-docx
Downloading python-docx-0.8.10.tar.gz (5.5MB): 5.5MB downloaded
Running setup.py (path:/tmp/pip_build_root/python-docx/setup.py) egg_info for package python-docx
no previously-included directories found matching 'docs/.build'
warning: no previously-included files matching '.DS_Store' foun........
Getting started, let's enable ephones and DNs we can add a phone with a telephone number:
Router>en
Router#conf t
Router(config)#telephony-service
!this enables ephone registration otherwise phones cannot register
Router(config-telephony)#ephone-reg
!max-ephones 2 says we can have a maximum of 2 phones, change to your needs (or to the limit set by your IOS image)
Router(config-telephony)#max-ephones 2
........
service sshd status
● ssh.service - OpenBSD Secure Shell server
Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enabled)
Active: failed (Result: start-limit-hit) since Wed 2019-10-02 11:07:54 EDT; 36s ago
Process: 476 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=255)
Oct 02 11:07:54 box systemd[1]: Failed to start OpenBSD Secure Shell server.
Oct 02 11:07:54 box sys........
This is just if we have an output line. wc we know can count lines but the -w flag will count words:
echo "Ihave this line here" |wc -w
5........
This often happens if you are adding a secondary route, especially with Linux source based routing.
ip route add default via 10.10.10.254 table 10
RTNETLINK answers: Network is unreachable
If that happens you will probably find that it is unreachable because your NIC does not have an IP in the 10.10.10.0/24 range so just assign an IP in that range to your NIC and try again.
eg. ifconfig eth0 10.10.10.254 netmask 255.255.255.0 up........
Now older versions of qemu-kvm didn't throw this error say if you just had "-video cirrus" when starting qemu-kvm. But newer versions do care.
And this probably only applies to you if you are running from bash/terminal with remote kvm images.
What you need to do is remove the "-video" part and just add -vnc :5
eg. this would fix the error:
qemu-system-x86_64 -enable-kvm -boot order=cd,once=dc -m 1024 -drive........
In Centos 7 tftpd will not work with selinux. Clients will not be able to connect and this is all you'll see in the log (then nothing more):
Sep 18 14:39:15 localhost xinetd[4327]: START: tftp pid=4331 from=192.168.1.65
On the client/computer side you will see this:
TFTP.
PXE-M0F: Exiting Intel Boot Agent
Basically the client is being instantly connected and bloc........
Having a network bridge allows you to bridge traffic under multiple devices so they can talk natively without using any special routing, iptables/firewall or other trickery.
To create your bridge you need the bridge-utils package for brctl and if you want to do things like bridge VMs that run on a tap device you will need the uml-utilities which provides "tunctl".
Install the utilities to make our bridge
sudo apt-get install........
By default your DHCP will often not work because it is not listening on any interfaces.
All you have to do is edit this file:
vi /etc/default/isc-dhcp-server
then find the "INTERFACES" line and add each interface that should listen:
INTERFACES="br0 enp0s10"
........
I think this is more so an issue with kernel modules not being included. I had this issue on Linux Mint because a new kernel I upgraded to DIDNOT have the "extra" modules and part of that reason is also because older kernels are named differently than new ones.
Take this example article below that shows it in action.
If you were previously........
This is something I've seen some run into. Take an old install of Linux Mint 18.1
ii linux-image-4.4.0-53-generic 4.4.0-53.74 amd64 Linux kernel image for version 4.4.0 on 64 bit x86 SMP
i........
python3 testserver.com-car-scraping.py html.txt
Traceback (most recent call last):
File "testserver.com-car-scraping.py", line 5, in
import mysql.connector
ImportError: No module named 'mysql'
For some reason it won't install properly even though I have the mysql client on this machine installed too.
Solution:
You need the mys........
If you've just installed VBox and it is not starting or working, the most common problem is usually that you don't have your kernel source installed, which means there is no kernel driver for vbox so it can't work.
So the first thing you should do is install your kernel source by running this:
sudo apt-get install linux-headers-`uname -r`
Then install the dkms/kernel module for vbox........
The way of doing it in mint is different than gnome and ubuntu.
gsettings set org.mate.background picture-filename /path/to/file.jpg
*If you try to use the gnome way it will NOT work with Linux Mint:
gsettings set org.gnome.desktop.background picture-uri /some/pic.jpg........
You'll have to edit the policy.xml file to fix this:
convert -density 300 output.pdf agreement.jpg
convert.im6: not authorized `output.pdf' @ error/constitute.c/ReadImage/454.
convert.im6: no images defined `agreement.jpg' @ error/convert.c/ConvertImageCommand/3044.
sudo vi /etc/ImageMagick*/policy.xml
#change
# ........
This is a security hole in my opinion and should be plugged by editing the lock screen ui layout:
vi /usr/share/mate-screensaver/lock-dialog-default.ui
#find these objects and set the visible property to false
object class="GtkLabel" id="note-tab-label"
object class="GtkLabel" id="auth-username-label>
object class="GtkLabel" id="auth-realname-label"........
By default printscreen or alt print screen will get the whole desktop or the application in focus, respectively. But what if you want to select a portion of the screen?
gnome-screenshot:
ksnapshot
compiz
This is a nicely integrated solution
sudo apt-get install compizconfig-s........
SSH helps keep us secure in many ways, one of those is the host-key fingerprint which is unique. If you have been connecting to an SSH server that you've made no changes to and suddenly ssh warns that the key doesn't match then you have a problem.
But how about connecting to an existing server for the first time on a new machine or client?
A lot of new clients calculate it using an SHA256 hash but it is not as easy on your host machine to produce the sam........
Click "Administration" ->"Login Window"........
Opening Firefox from the CLI reveals the following as the cause of the error:
Query failed: Error: Error(s) encountered during statement execution: no such table: moz_favicons
The symptoms of this issue are that in the address bar you cannot hit enter to browse to a site/url/address and your history cannot be accessed, nor does your history show up in the address bar when typing previously used addresses.
This usually happens because you've........
Install Errors on Version 12:
This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5
on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error.
*Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install.
What really causes this even though you successfully install........
If you get error messages like this it is usually because /var/run/sshd does not exist.
root@userbox:/# service sshd status
● ssh.service - OpenBSD Secure Shell server
Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enab
Active: failed (Result: start-limit-hit) since Wed 2019-04-10 02:24:44 EDT; 1
Process: 511 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=255)........
I have seen this in a few rare cases after a reboot, where all folders and files will have the Read Only Attribute. If you uncheck it, it will just come back. It is more of a filesystem issue in Windows than a configuration issue and it looks like when Windows detects a badly corrupted filesystem that it will make things read-only, sort of like Linux would.
If you are Administrator or the owner of the folder and this is happening it is probably due to the reasoning mention........
The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs.
qemu-kvm command:
/usr/libexec/qemu-kvm -version
QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard
........
2,6,A or E is what the second digit of your MAC address must be otherwise a lot of OS's will not work. They will say the NIC is down/not connected even though it is.
This is because if the second digit is not set properly it will not view as a valid MAC or device uplink. This is especially an issue with VMs whether in QEMU etc.. if you are making your own MAC.
MAC address is invalid
c4:d1:aa:e5:10:05
To fix it just........
There are multiple layers but most are enabled by default such as the setting in the Phone Device Settings.
However the one not enabled by default is the one in "Enterprise Phone Configuration".
Enable "Cisco Camera" and then reboot your phones to enable it.........
Oops did you get this error trying to install an oldschool driver and think it is hopeless in a new version of Windows?
First of all it is almost never a program compatibility issue:
........
It is much more useful to have meaningful and detailed logging from tftp to see what is or isn't happening especially for VOIPand other embedded device appications:
Edit the file:
vi /etc/xinetd.d/tftp
Change the server line like this:
server_args = -s /var/lib/tftpboot........
This will find all tap devices and try deleting all of them. Of course don't run this if there is a chance an unused tap device is necessary and would not be created by the script ro application using it.
for tap in `ifconfig -a|grep tap[0-255]|awk '{print $1}'`; do
tunctl -d $tap
done........
Pass QEMU this flag:
-soundhw ac97
Or you could use (for a Ensoniq soundcard):
-soundhw es1370
However on some machines I get this error:
pulseaudio: pa_simple_new for capture failed
pulseaudio: Reason: Connection terminated
pulseaudio: pa_simple_new for capture failed
pulseaudio: Reason: Connection terminated
audio: Failed to create voice `ac9........
Are you tired of coming back to your computer only to find your SSH connections have been broken? Even worse are the ones that hang where it appears to be connected but it is really not.
The one option you have is an SSHclient side modification to send KeepAlive packets, sometimes this can also keep up your WiFi connection and stop it from disconnecting you as well.
To make the keep alive changes for your just yourself (not system wide)........
This is the closest way to disabling it without using the "libata.force=noncq" kernel boot option is to set the queue to a depth of 1 which doesn't actually disable it.
Change the sdc below to match the device you want to disable NCQ for.
[root@officebox ~]# echo "1" > /sys/block/sdc/device/queue_depth
Errors that indicate you are having a performance issue are these in messages or dmesg relating to N........
This is usually because the Group Policy forbids that user or group from logging in.
run "gpmc" (not "gpedit.msc" as that is for local computer settings when you are not using Active Directory) or go to Administrative Tools and Group Policy Management.
Edit the default domain policy like below........
If you visit a site that exploits the WebRTC vulnerability including whatismyipaddress.com it may show "Local IP Address" which would be the real IP of your machine.
The vulnerability works on Windows and Linux machines (contrary to false information on the web which claims it only affects Windows).
The above works and happens even if you are using a proxy or VPNaccount like ProVPNAccounts.com
It is easy........
chroot which stands for change root allows you to virtually operate in another operating system even though you haven't booted it. It is commonly used to deploy new distros, applications and to fix a broken Linux/Unix install or prep a new system image without having to physically boot the drive or disk.
So in this example let's say we have a drive that has a Linux OS installed on /dev/sdb1 and we have mounted this partition on /mnt/sdb1
The key point is to edit the &quo........
WARNING: Image format was not specified for '/mnt/space/cucm12.img' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
#you should manually specify the format
q........
This is a common issue that I haven't seen many answers for on the internet. When you are using Linux as your host machine and you are connecting to another Linux machine over VNC you CANNOT use Ctrl+Alt+F1 to change virtual consoles as it sends the keys to your actual local machine.
In many versions of Linux you can cycle through virtual terminals including over VNC using this:
Alt + Left Arrow or Alt + Right Arrow
This........
This is usually because of STP causing a delay in the negotiation.
Edit your ifcfg script eg:
/etc/sysconfig/network-scripts/ifcfg-eth0
Add a LINKDELAY of 30 seconds or whatever works for you:
LINKDELAY=30
After that you should have an IP during bootup.........
The net-tools command brings back all of the oldschool tools that we're used to:
/bin/netstat
/sbin/ifconfig
/sbin/ipmaddr
/sbin/iptunnel
/sbin/mii-tool
/sbin/nameif
/sbin/plipconfig
/sbin/rarp........
Uh oh, so you're working on some super l33t code or other stuff that is super important and Linux Mint's MATE or Cinnamon window manager freezes. This means maybe you can move your mouse but you can't click anything, you can't Alt + Tab to another program but everything appears to be working other than that.
The first thing you would do is Ctrl + Alt + F1 (or whatever virtual terminal you want) and get into the Linux bash prompt (the black screen where things really happen :))........
Perhaps you've just seen this in the bash prompt:
-bash-4.1#
Instead of the expected user@hostname#
It is probably because you are missing .bash_profile or .bashrc in your home directory
Check for yourself:
ls -al ~/|grep -E ".bash_profile|.bashrc"
-rw-r--r--. 1 root root&nbs........
This may sound silly but often on the same machine multiple versions of SQL may be installed due to other applications.
How do we know which one we are running and connected to?
Use the query:
select @@version
........
If you don't aleady have it, you'll need EPEL
Install LXC
yum -y install lxc lxc-templates
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: mirror.it.ubc.ca
* epel: mirrors.kernel.org
* extras: mirror.it.ubc.ca
* updates:........
Shutdown/restart the actual server
utils system shutdown
utils system restart
show hostname
show myself
change set or reset password
set password user [username]
set hostname
set network hostname
service management........
So say you are behind a typical NAT/LAN setup whether at home, work or while travelling. What if you have a computer or server that you need to connect to from the outside?
Yes you could use a VPN but a quick and dirty, temporary and secure way is to use SSH's Reverse Tunneling Proxy feature.
Requirements
On the remote ssh server host you need the GatewayPorts option enabled in sshd_config (be........
For some reason, perhaps you don't want to run a daemon or let Letsencrypt have access to your production server.
There is a way to use it like a normal CSR/CA setup in manual mode.
./letsencrypt-auto certonly --manual -d realtechtalk.com - www.realtechtalk.com
Eventually you will get prompted to create a certain path and file with certain data:
Create a file containing just this data:
Casdfasfadsfsad........
In this case if fullurl started with http://www. then it is a match
Note that you CANNOT put quotes around it or it becomes a literal match which will not work as intended in the bash script example below.
if [[ $fullurl == http://www.* ]]; then
echo "do something"
fi
Another example say we want to delete every file or dir in a path except sometihng that starts with "hellothere":
for file in `l........
In most of the Cisco router IOS I find the ports like ge0/0 ge0/1 and ge0/2 or whatever your ports are down. They will not even give you a link light. So one of the first tasks should be getting the port you are working with up.
In my case the first goal is often connectivity with the LAN and WAN.
LAN = your local area network (eg. in the office/home )
WAN= your ISP/public internet (eg. fiber/cable/dsl/ethernet).
In these examples I as........
for ip in `netstat -nt|awk '{ print $5 }'|cut -d ":" -f 1|tail -n +3|sort|uniq`; do
echo $ip;whois $ip|grep -i netname;echo "---------------------------"
done
77.88.47.40
netname: YANDEX-77-88-47
---------------------------
40.77.167.5
------........
00:55:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
00:55:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
Switch(config)#no logging console
........
Switch#show ip dhcp snooping
Switch DHCP snooping is disabled
DHCP snooping is configured on following VLANs:
1
Insertion of option 82 is enabled
circuit-id format: vlan-mod-port
remote-id format: MAC
Option 82 on untrusted port is not allowed
Verification of hwaddr field is enabled
Interface&nb........
Enter configuration console:
enable
configure terminal
This is important because if your console doesn't look like below none of the commands will work!
Switch(config)#
Save and Apply Settings
wr
Show Switch Configuration:
show run
Show Port List/Sta........
*The easy way is to just hold the mode button for 10+ seconds.
The full/proper way is below:
1.) Either power on the unit and hold the "mode" button or hold the "mode" button until you see the below:
00:04:08: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram
00:04:08: %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configuration is reset and the system will now reboot
00:04:09: %SYS-5-REL........
The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported.
Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........
What you need to do if you have taken a dd or real raw image dump of a hard disk:
VBoxManage convertdd windows2019-eval-template.img windows2019.vdi --format VDI
The .img is the raw dd dump and the .vdi is the output file.
--format VDIspecifies to output to .vdi format
If you are in a pinch you can always use qemu-kvm binary and manually specify the .img as your disk and i........
By default telnet is not enabled or installed on the latest Windows servers so you'll get an error saying:
telnet is not recognized as an internal or external command
dism /online /Enable-Feature /FeatureName:TelnetClient
........
ln -s --force newfile.jpg existingsymlink.jpg
All you do is use the --force flag to force/update the existing one.
The above modifies a symlink called "existingsymlink.jpg" and points it to "newfile.jpg" as the source.........
It was broken because of this package for xorg I installed:
xserver-xorg-core-hwe-18.04
Just remove it even if you have to chroot from a live USB/CD:
sudo apt-get remove xserver-xorg-core-hwe-18.04........
The key thing here is to know the actual partition that is encrypted.
Often in Linux Mint's installer that ends up being partition 5 or /dev/sda5
sudo cryptsetup luksOpen /dev/sda5 anynamehere
You will then be prompted for your irrecoverable passphrase:
Enter passphrase for /dev/sda5:
If all goes well it won't say anything further. If it says ""No key available with this passphr........
This is not about systemd/systemctl and not about "onboot" so there's no rc.local trick here but it's the GUI/Gnome etc when a user logs in that a command is launched.
Put this in your home dir
The .config/autostart directory is where Linux Mint/Ubuntu checks for autostart application config files
mkdir -p ~/.config/autostart
Create a new entry/file that starts an application........
If you see this in /etc/sudoers it is NOT a comment but an include.
#includedir /etc/sudoers.d
For example in Linux mint sudoers.d contains the following files:
casper mintupdate README
casper for example contains the following sudoers line:
mint ALL=(ALL) NOPASSWD: ALL
So if you are messing ar........
Do you hate how Centos 7 defaults to allocating most of your valuable space to /home even though it is a production server?
Here is a quick guide on how to take back that space live, while online (of course make sure you have backups just in case something goes wrong!):
First we will reduce our home dir by 100G:
lvreduce -L -100G /dev/mapper/centos-home
WARNING: Reducing active and open logical volume to ........
debug1: Local connections to LOCALHOST:18006 forwarded to remote address 192.168.1.93:8006
debug1: Local forwarding listening on 127.0.0.1 port 18006.
debug1: channel 0: new [port listener]
debug1: Local forwarding listening on ::1 port 18006.
bind: Cannot assign requested address
What we are seeing is that we can't listen on an IPV6 address of ::1. We need to tell SSH to stop using IPV6 so we'll edit ssh_config to take care of this issue........
Jan 30 17:16:10 localhost sshd[25385]: error: Failed to allocate internet-domain X11 display socket.
The solution for me on the server side was the following in sshd_config:
AddressFamily inet
*Remember to restart sshd and also reconnect from the client side.
Ihad all the normal X11 settings on the server but it just stopped........
The defaults in Windows 2016 server leave clients crippled so they can't even download basic files or software. But Group Policy Management Editor comes to our rescue!
Use cmd or Powershell and run:
gpme.msc
Choose your domain/computer and then navigate like below and create a new menu entry for IE11 or whatever your version is. Don't be worried if the highest version is IE10 it means that it applies to IE10 AND above.........
Whether you are at work, at the coffee shop or on the public internet here are some basic but effective rules for iptables that lock things down (eg. no one can SMB or SSH to you or really anything):
# Generated by iptables-save v1.4.21 on Fri Dec 14 14:00:08 2018
*nat
:PREROUTING ACCEPT [160:19844]
:INPUT ACCEPT [4:357]
:OUTPUT ACCEPT [2955:182236]
:POSTROUTING ACCEPT [2955:182236]
COMMIT
# Completed on Fri Dec 14........
size = the amount of RAM (m for megabytes)
/mnt/ram = the mount location of the ram disk (change to the path you want it mounted to)
mount -t tmpfs -o size=4096m tmpfs /mnt/ram/
Example test in an old server:
You can see that when reading if you don't specify bs1=M the read speeds are several times slower (eg. 450MB/s vs 2.1GB/s)
mount -t tmpfs -o size=4096m tmpfs /mnt/ram/^C
root@testserver:~# dd........
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md127 : active (auto-read-only) raid10 sdc1[0] sdb1[2]
1953382400 blocks super 1.2 512K chunks 2 far-copies [2/1] [U_]
resync=PENDING
bitmap: 15/15 pages [60KB], 65536KB chunk
Solution force repai........
iw dev wlan0 station dump
This is very useful because it is helpful if you are running something like hostapd and need to see the signal strength and negotiated connection speed.
Station ff:ff:ff:ff:ff:ff (on wlan0)
inactive time: 16309 ms
rx bytes: 25451
rx packets: 325
tx bytes: 44381
tx packets: 159
tx retries: 0
tx failed: 0
signal: -72 [-72] dBm
signal avg: -72 [-72] dBm........
When using strip_tags and html_entity_decode with PHPit often breaks and produces annoying diamonds with question marks.
It is probably because of characters like these:
… (looks like 3 dots but it is a single weird character).
’ (looks like a normal apostraphe but it is not)
” (looks like a normal double quote but it is not).
An easy way to sort this out is to copy the above and search in an ASCII table to extend the functional........
This should apply to most Linux distributions just incase you get into trouble or wipe out the defaults by accident.
/etc/iproute2/rt_tables
#
# reserved values
#
255 local
254 main
253 default
0 unspec
#
# local
#
#1 inr.ruhep........
Below are the common errors you'll get with named AKA bind if your time is incorrect.
The simplest solution is to install and run ntpd to correct your system's time (install ntpd if it is not installed)
systemctl start ntpd
systemctl enable ntpd
Dec 20 13:36:16 hostingbox named[2169]: error (no valid DS) resolving 'develop.waxrain.com/A/IN': 14.215.150.17#53........
A lot of people just have a -j DROP to drop all unwanted traffic or traffic not explicitly allowed but there is a better solution if you want real and proper logging:
Take an example iptables rules file
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i eth1 -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth1 -j ACCEPT
-N LOGGING
-A INPUT -j LOGGING
-A LOGGING -j LOG --log-pre........
Just find the relevant file in /etc/NetworkManager/system-connections
sudo vi /etc/NetworkManager/system-connections/Wired connection 1
[802-3-ethernet]
duplex=full
mac-address=00:00:00:FE:FE:FE
[connection]
id=Wired connection 1
type=802-3-ethernet
timestamp=1532403341
[ipv6]
method=ignore
[ipv4]
method=manual........
Set this in /etc/sysctl.conf
net.ipv6.conf.all.disable_ipv6 = 1
#apply the settings
sudo sysctl -p
........
growisofs -Z /dev/sr0 critical.tar.gz.gpg
Executing 'genisoimage critical.tar.gz.gpg | builtin_dd of=/dev/sr0 obs=32k seek=0'
I: -input-charset not specified, using utf-8 (detected in locale settings)
File critical.tar.gz.gpg is larger than 4GiB-1.
-allow-limited-size was not specified. There is no way do represent this file size. Aborting.
:-( write failed: Input/output error
#remember to us........
On a test machine Iwas never able to access to a newly created 4th partiton. As we can see there are dev devices for everything but the 4th partition.
The normal "partprobe" or "kpartx" or kernel being told to rescan the block device didn't help (only a reboot did).
fdisk -l /dev/sda
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units........
mdadm --manage /dev/md125 -a /dev/sdb4
mdadm: add new device failed for /dev/sdb4 as 3: Invalid argument
Dec 19 01:23:48 storageboxtest kernel: [ 2328.854491] md: sdb4 does not have a valid v1.2 superblock, not importing!
Dec 19 01:23:48 storageboxtest kernel: [ 2328.854499] md: md_import_device returned -22
#zero the superblock and try again!
mdadm --zero-superblock /dev/sdb4
mdadm --ma........
Do you hate it when your ISPhas old cached records because of a high TTLon the DNS record of the relevant domain? In plain English this means you often can't connect to a site or service because your ISP's DNS servers haven't gotten word of the new IP address (probably because they haven't checked). There are also some that are notorious for ignoring TTL and not updating records for days!
But if you are lucky and smart enough to have your own Linux based DNS se........
First we need to create dhclient.conf if it doesn't exist or edit it:
vi /etc/dhclient/dhclient.conf
#add this line at the top add the IPs as commas they will be the highest priority nameservers and whatever your ISP gives you will be used after these one (good for DNS backup)
prepend domain-name-servers 127.0.0.1,10.10.25.8;
After you restart your network or run dhclient again you should see the contents of........
The reason for not being able to read one of these dreaded/ fillable "XFA" forms is because no Linux PDF reader that I'm aware of supports them. Part of this reasoning is for security. It is really silly, they should ban these XFA forms or at least replace the Please Wait with the non-fillable version.
Download Adobe Reader 9.5 for Linux from here:
This is the solution but only so much, at least for me I was able to view th........
First you need the "iptables-persistent" package. This gives you an init script that loads your settings from /etc/iptables/rules.v4 and rules.v6
When you install it, it wll save your default setings in /etc/iptables.
sudo apt-get install iptables-persistent
Remember that the rules are stored here:
For IPV4: /etc/iptables/rules.v4
For IPV6: /etc/iptables/r........
Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated.
It has caused a kernel panic and system crash repeatedly as we can see from the logs.
But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector.
Any time I have had anything but 0 for that attribute it........
initiator = client
target = server
These are the first concepts you should understand which is that in iscsi essentially the "initiator" is the client and the "target" is the server.
iSCSI is derived from the old fashioned SCSI that us oldtimers grew to love. The "i" stands for Internet and the SCSI stands for "Small Computers Systems Interface" (SCSI).
iSCSI Target (Server)Setup
targetcli is the pac........
confmodules=`cat /etc/httpd/conf/httpd.conf |grep -v ^#|grep "modules/"|awk '{print $3}'|cut -d "/" -f 2`
for module in $confmodules; do
echo "module=$module"
if [ ! -f /etc/httpd/modules/$module ]; then
linenum=`awk /"$module/{ print NR; exit}" /etc/httpd/conf/httpd.conf`
sed -i "$linenum"s/.*// /etc/httpd/conf/httpd.conf
&n........
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/pdo_mysql.so' - /usr/lib64/php/modules/pdo_mysql.so: symbol mysql_options, version libmysqlclient_18 not defined in file libmysqlclient.so.18 with link time reference in Unknown on line 0
#not sure what is wrong with php-mysql but I removed it and installed mysqlnd
yum -y remove php-mysql
yum -y install php-mysqlnd........
This takes "yourvariable" and splits it based on the last character in this case "-" and shows the last field of that split.
${yourvariable##*-}
........
Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments.
Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........
#get line number of occurrence in text file and then print out x lines from that point
#get the line number of the first occurrence of our search text
linenumber=`grep -n "someuniqueitem" inventory.txt|head -n1|cut -d ":" -f 1`
#linestop represents how many lines after the occurring line we want to print out in this case "20"
linestop=$((linenumber+20))
# sed prints out the line range we want f........
In this case it just searches for port 80 it is fairly handy if you have some sort of appliance or something else you aren't sure of the IPof
Of course change the port 80 port to whatever port(s) you want.
for ip in `arp -n|arp -n|tail -n +2|head -n -1 |grep -v incomplete|awk '{print $1}'`; do
echo "checking $ip:80"
nc -w 1 -z $ip 80
if [ "$?" == 0 ]; then
echo "**Port 8........
mytop is one of my favorite tools and it is fairly simple aside from a few caveats and issues that persist to this day.
To install it on Centos:
yum -y install centos
Configure ~/.mytop
vi ~/.mytop
user=root
host=localhost
db=test
#port=3306
socket=/var/lib/mysql/mysql.sock
header=1
color=1
Try runni........
systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system.
The key commands or arguments you will use with systemctl are the following:
Unit Commands:
list-units [PATTERN...] List loaded units
&nbs........
The problem I was having is that a css template Iwas using was causing
br's to have an empty line in between which is very undesirable especially when displaying code.
br {
display:none;
margin: 0px;
height: 0px;
}
Using CSS code like above will fix it. You technically shouldn't need the margin or height either.........
A quick check in /dev/pts shows a lot of entries but what are they for?:
ls /dev/pts
0 10 12 14 16 18 2 21 23 25 27 29 30 32 4 6 8 ptmx
1 11 13 15 17 19 20 22 24 26 28 3 31 33 5 7 9
Basically they are pseudo-termi........
umask are the default permissions that are applied when a file or directory are created. To see this in action simply just "touch filename" or "mkdir somedir" and you'll see what default permissions are applied.
The first thing Ialways tell people you should know is to NEVER change the defaults unless you are making them more restrictive. But they work well and if you change the defaults you could end up creating a file without permission to read........
Ihave a directory structure which the primary user needs full access on but wanted a user to access only a specific directory within the main directory (so they could write in there only and nowhere else).
Here's what Idid:
[root@compevo8001 dllnow]# ls -alh
drwxrwxr-x 2 someuser software 4.0K Oct 19 2017 ExpireYMD-2017-11-20
drwxrwxr-x 2 someuser software 4.0K Nov 19 2017 ExpireYMD-20........
Getting an error about gi missing when running a .py python script?
Just install EPEL and install the python3-gobject package:
yum install python34-gobject........
Did you just install the minimal version by accident or want to install the GUI? No need to reinstall just tell yum to do the work for you!
You could actually have both installed and choose one as your preference on demand (although many people prefer GNOME's simplicity).
Step 1.)
Install Gnome and/or KDE.
To install the GNOME Desktop on Centos 7:
yum -y groups install "GNOME Desktop"
To........
You can do other things but this particular script is just to set all AMD cards to 80% fan speed (remember this script needs to applied everytime you reboot). You could set it is a cron or just throw it into /etc/rc.local
basepath=/sys/class/drm
for hwmon in `ls -1 /sys/class/drm|grep card[0-99]$`; do
echo card=$hwmon;
hwmonname=`ls $basepath/$hwmon/device/hwmon|grep hwmon[0-99]`
hwmonpath=$basepath/$hwmon/device/hwmon/$hwmonname
echo "ec........
You'll have to violate the iso9660 standards but it is necessary if you want to preserve your filesystem and filenames and shouldn't be an issue as long as you are using a modern OS like Linux.
genisoimage -o Backup-Myfiles.iso -r -J -joliet-long /some/path/
You will get errors like below (even enabling joliet-long didn't help)
genisoimage: Error: /some/filename.pdf have the same Joliet name
Joliet tree sort failed. The -joliet-lo........
4.374647] usb_common: exports duplicate symbol usb_get_dr_mode (owned by kernel)
[ 4.403334] usbcore: exports duplicate symbol __usb_get_extra_descriptor (owned by kernel)
[ 4.427736] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 4.427844] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 4.429040] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
[ 4.429141] xhci_hcd 0000:00:15.0: cache line size of 64 is not sup........
#Linux Mint 18.2 how to install gajim .16.9 so you can use OMEMO encryption:
sudo apt-get install python-axolotl python-nbxmpp
wget https://gajim.org/downloads/0.16/gajim-0.16.9.tar.gz
tar -zxvf gajim-0.16.9.tar.gz
cd gajim-0.16.9
./autogen.sh ;make;sudo make install
#if you get this error you need to get a newer python-nbxmpp from here:
gajim
Gajim needs python-nbxmpp >= 0.6.1 to run. Quiting...........
wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe
--2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe
Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85
Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1525561 (1.5........
sudo apt-get install hwloc-nox
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
hwloc-nox
0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded.
Need to get 151 kB of archives.
After this operation, 453 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubunt........
After starting the install it stalls here:
admin/index.php?cache=0&agreelicense=1&confirmrelease=1&lang=en
If you manually refresh you get a Plugins check screen:
Installation
System
Moodle second step fails just blank screen:
https://domain.la/user/editadvanced.php?id=2
Solution: give up and choose something else it shouldn't be thi........
Your database uses Antelope as the file format. Full UTF-8 support in MySQL and MariaDB requires the Barracuda file format. Please switch to the Barracuda file format. See the documentation MySQL full unicode support for details.
In /etc/my.cnf under [mysqld]
180827 21:43:14 InnoDB: 5.5.59 started; log sequence number 1589339
180827 21:43:14 [ERROR] /usr/libexec/mysqld: unknown variable 'db_file_format=Ba........
The folder contents could not be displayed
Backend currently unmounting
drwx------ 10 userhere group 260 Aug 23 19:40 ..
?????????? ? ? ? ? ? sftp:host=192.168.8.80,user=adhoc
ls: cannot access 'sftp:host=192.168.8.80,user=adoc': Input/output error
$ ps aux|grep fuse
one 253........
#check if nested KVM is enabled by doing a cat on nested inside sys
root@s14:~# cat /sys/module/kvm_intel/parameters/nested
root@s14:~# echo "options kvm-intel nested=Y" > /etc/modprobe.d/kvm-intel.conf
root@s14:~# echo "options kvm-amd nested=1" > /etc/modprobe.d/kvm-amd.conf
root@s14:~# modprobe -r kvm_intel
modprobe: FATAL: Module kvm_intel is in use.
root@s14:~# modprob........
This is not so much of a vi error as it is a physical filesystem error in the sense that the file you are trying to write to is a symlink and the destination doesn't exist or for some other reason is inacessible.
So vi is tellng you "you're writing to a symlinked file and the file the symlink points to cannot be written to". This is especially highlighted byt he fact that if you are using wq! to write and you still get the error.........
Usually this is because when you created your user you added a user but didn't create their home directory and/or for some reason your .bashrc and .bash_profile in ~ (home) is broken/missing.
In your home just create the following files with the following content to solve it:
.bashrc and .bash_profile.
To apply it just relogin/start a new bash session
# .bash_profile
# Get the aliases and funct........
zenity is a nice utility as part of the gnome window manager that allows you to script from bash and retrieve the input from the user. It could also be helpful in just notifying a user when they login with a popup window.
I'll give an overview of what's available with zenity:
Application Options:
--calendar Display calendar dialog
--entry Display tex........
You can find many ways to specify the VLANin your network configuration but Ifind this is the simplest and quickest.
In this case we are talking about a bridged adapter "vmbr0" but it works even if you just had a normal non-bridged interface.
The key here is that in vmbr0 you'll notice there is no IP address. We just specify "manual".
Below it is a similar stanza for "vmbr0.58" in this case 58 represents the VLAN (change........
Almost always the reason will be that the php.so file is missing but also that php.conf is misconfigured.
In the problem machine it is actually PHP7 installed so if you reference PHP5 of course things wil be broken!
Take for example here:
cat /etc/httpd/conf.d/php.conf
#
# PHP is an HTML-embedded scripting language which attempts to make it
# easy for developers to write dynamica........
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0
Solution:
Edit geoip.ini
vi /etc/php.d/geoip.ini
Comment out the .so like so:
;extension=geoip.so
service httpd restart........
Starting httpd: httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/httpd/modules/libphp5.so: cannot open shared object file: No such file or directory
This is basically caused by the PHPmodule specified in php.conf being non existent. The error tells us it couldn't fnd /etc/httpd/modules/libphp5.so........
Aug 13 13:46:33 s2sout2d45040 info Failed in all attempts to connect to proxy.eu.jabber.org
Aug 13 13:46:33 s2sout2d45040 info Sending error replies for 1 queued stanzas because of failed outgoing connection to proxy.eu.jabber.org
No clue why it tries to use a proxy not explicitly specified. This could be because the proxy specified for the domain fails when someone is trying to se........
[root@localhost:~]
BootModuleConfig.sh echo host-ind nfcd........
yes it does create its own json
============================================
cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json
2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1
--> ........
./tronwatch: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory
[root@testing linux-unpacked-1.0.7]#
Solution:
yum -y install alsa-lib-devel........
The solution is just to install libmicrohttpd-dev
./xmr-stak
./xmr-stak: error while loading shared libraries: libmicrohttpd.so.10: cannot open shared object file: No such file or directory
libmicrohttpd
libmicrohttpd10 - library embedding HTTP server functionality
libmicrohttpd-dbg - library embedding HTTP server functionality (debug)
libmicrohttpd-dev - library embedding HTTP server functionality (development)
$ sudo apt-get i........
Aug 10 01:11:54 mailserver postfix/smtp[6180]: 020AE17C2BD1: to=, relay=none, delay=0.29, delays=0.28/0/0/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=gmail.con type=A: Host not found)
A user complained that their e-mails weren't being delivered but they actually made a small typo and used gmail.con so it wasn't working as expected of course........
There is no such option as "VBS" that Ican see in vSphere 6.7 Ibelieve this is actually an issue because of using old hardware in this case L5420 doesn't support Nested Virtualization I believe.
Hardware virtualization is selected and cannot be deselected due to selection of VBS
Insufficient resources to satisfy configured failover level for vSphere HA.........
sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3
sudo apt-get install libcurl4-gnutls-dev
git clone https://github.com/wolf9466/cpuminer-multi
sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev
git clone https://github.com/fireice-uk/xmr-stak-cpu.git
make install
cd bin
chmod +x xmr-stak-cpu
./xmr-stak -O xmr........
./nsgpucnminer: error while loading shared libraries: libOpenCL.so.1w: cannot open shared object file: No such file or directory
........
To remove all spaces from all files in the current directory
linux rename remove spaces
rename "s/ //g" *
how to replace part of the text with another (it is almost like using sed):
rename s/"Screenshot at 2019-04-22 "/"AC97-Windows-InstallSolution"/g *
The first part "Screenshot at 2019-04-22" is what we're looking for
The........
[root@thetor2017 conf]# service httpd restart
Stopping httpd: [ OK ]
Starting httpd: WARNING: MaxClients of 3000 exceeds ServerLimit value of 300 servers,
lowering MaxClients to 300. To increase........
INFO [07-19|12:11:51] Imported new block receipts count=590 elapsed=8.440s bytes=74117699 number=4870906 hash=6bc60b…934753 ignored=0
INFO [07-19|12:11:57] Imported new state entries count=499 elapsed=9.963ms processed=71076 pending=1526 retry=2&nbs........
This is often the result of PayPal's "item name" or another name having invalid characters or not supporting Unicode.
173.0.81.1 - - [17/Jul/2018:13:39:45 -0400] "POST //modules/gateways/callback/paypal.php HTTP/1.1" 406 - "-" "PayPal IPN ( https://www.paypal.com/ipn )"
A good clue is if you check the debug output of the IPNand find a mandatory column empty.
........
https://yarnpkg.com/lang/en/docs/install/#centos-stable
curl --silent --location https://dl.yarnpkg.com/rpm/yarn.repo | tee /etc/yum.repos.d/yarn.repo
If you need node.js:
curl --silent --location https://rpm.nodesource.com/setup_6.x | bash - yum install nodejs yarn........
Server Side Config
1.) First install nfs-utils
yum -y install nfs-utils
2.) Configure nfs share
Create a directory for your NFS share
mkdir /datastore
Create your NFS share in /etc/exports
echo "/datastore 10.220.101.0/24(rw,sync,no_root_squash)" >> /etc/exports
systemctl restart nfs........
dvd+rw-mediainfo /dev/sr0
INQUIRY: [ASUS ][BW-16D1HT ][3.00]
GET [CURRENT] CONFIGURATION:
Mounted Media: 11h, DVD-R Sequential
Media ID: RITEKF1&n........
Ialready have the caja-image-converter option installed but it shows nothing.
Weirdly enough if you install nemo and nautilus converter it does show and work inside caja:
The solution is to install *-image-converter
sudo apt-get install *-image-converter
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'n........
We all know Linux is known for good memory management but is it really? It seems all on its own with hardly anything running that you can come back in days or weeks and find that almost all of your RAMis used!
And many will say "no don't worry it's buffers for optimization" but it doesn't seem to help because what is in buffers is not available to use for new programs running or ones that allocate more RAM as far as Ican tell.
The reason Iknow........
Many people are aware of the "eject command" which works as you would expect.
To eject the disc:
sudo eject /dev/sr0
To insert the disc again you still use the same command but with the "-t" close try toggle:
sudo eject -t /dev/sr0
........
You can search for this bug and it seems like it may be related to ecryptfs and is many years old.
The symptoms are that you return to the computer and the screensaver was active or the screen was asleep/black and it doesn't seem to come back. But you check by SSH the computer is running fine and are frustrated you'll lose your running programs and have to reboot.
There is a simple solution:
Ctrl + Alt + F1
Ctrl +Alt + F8
Ba........
I've read a few guides about this but they didn't work for me.
sudo apt-get install bridge-utils
#don't think the above is enough it won't work still even though you have by default an /etc/qemu-ifup that handles it if you have the right tools and setup
sudo qemu-system-x86_64 -net tap -net nic -enable-kvm -cpu host,vmx=on ~/VirtualBox VMs/vsphere-vcenter/vsphere-vcenter.vdi
W: /etc/qemu-ifup: no bridge for guest interface foun........
I can't get vmx cpu extensions to show up in Virtualbox guests despite enabling nested paging and
enable vmx in virtualbox guest but this doesn't help that you check VT-X or the AMD Virtualization SVM it enables it for the guest to use BUT does not pass it through. This means if you check cat /proc/cpuinfo in the guest you will see the CPUdoesn't support virtualization. It looks like VirtualBox still hasn't implemented this!
But there is good news I&n........
InternalServerError (com.vmware.vapi.std.errors.internal_server_error) => {
messages = [LocalizableMessage (com.vmware.vapi.std.localizable_message) => {
id = vapi.bindings.method.impl.unexpected,
defaultMessage = Provider method implementation threw unexpected exception: com.vmware.vapi.std.errors.InternalServerError,
args = [com.vmware.vapi.std.errors.InternalServerError]
}],
data =
}
I was getting the........
nfs mount failed:
mount 10.10.2.20:/tmp/nfsmount /mnt/nfs/
mount: wrong fs type, bad option, bad superblock on 10.10.2.20:/tmp/nfsmount,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
need a /sbin/mount. helper program)
 ........
Intel VT-X is enabled in Virtualbox but it doesn't seem to pass through the needed vmx extension despite the following variables on the host confirming it is enabled:
cat /sys/module/kvm_intel/parameters/nested
Y
cat /sys/module/kvm_intel/parameters/ept
Y
OVF Tool: Disk progress: 99%
OVF Tool: Transfer Completed
OVF Tool: Powering on VM: Embedded-vCenter-Server-Appliance-
OVF Tool: Task p........
sudo apt-get install nfs-kernel-server #oops there are no exports so it won't startsudo /etc/init.d/nfs-kernel-server start* Not starting NFS kernel daemon: no exports.
#we will use the /tmp/nfstestshare directory for our NFS share
mkdir /tmp/nfstestshare
#add it to /etc/exports (basically what NFS checks to determine what to make an NFS share)
/tmp/nfstestshare 192.168.1.5(rw,sync,........
#mount the VCSA DVD
mount /dev/sr0 /mnt/cd
#alternatively you could mount the iso directly
mount -o loop vcsa.iso /your/mount/path
#for this purpose we are using the CLI installer on Linux
cd /mnt/cd/vcsa-cli-installer/lin64
#no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file
./vcsa-deploy
Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........
10/07/2018 03:05:14 PM [IPv4] Got connection from client10.10.25.1
10/07/2018 03:05:14 PM other clients:
10/07/2018 03:05:14 PM Client Protocol Version 3.7
10/07/2018 03:05:14 PM Advertising security type 18
10/07/2018 03:05:14 PM Client returned security type 18
10/07/2018 03:05:14 PM TLS Handshake failed: Could not negotiate a supported cipher suite.
10/07/2018 03:05:14 PM Client10.10.25.1 gone
10/07/2018 03:05:14 PM Statistics:........
Starting with newer versions of OpenVPN Ibelieve 2.2+ you need to have "script-security 3" set or you can't execute a third party script.
Prior to that you could also use the auth-user-pass-verify like this:
auth-user-pass-verify ./validate.pl "$username $password $ip" via-env
Options error: the --auth-user-pass-verify directive should have at most 2 parameters. To pass a list of arguments as one of the paramete........
First of all download the raw .so file from zend:
Copy the one relevant to your PHPversion to /usr/lib64/php/modules/
eg.:cp ioncube_loader_lin_5.3.so /usr/lib64/php/modules/
Then in your /etc/php.d/ directory create the file:
vi /etc/php.d/zend.ini
zend_extension = /usr/lib64/php/modules/ioncube_loader_lin_5.3.so
After that restart apache/httpd and you'll be good to go!........
The main issue is it looks like Java is not configured to accept the invalid ssl cert that is coming from the download location.
Exception in thread "main" java.lang.RuntimeException: javax.net.ssl.SSLException: java.security.ProviderException: java.security.InvalidKeyException: EC parameters error
export ANDROID_HOME=/home/user/Downloads/tools/
Conversations-master$ ./gradlew
Downloading https://services.gradle.org/distributions/grad........
This is most likely to happen on a normal GUI system like Ubuntu or Linux Mint. If you or the user is meant to have sudo / root privileges it is as simple as editing the following files:
Now assume your username is "iamtheuser"
vi /etc/group
adm:x:4:syslog,iamtheuser
sudo:x:27:anotheruser,iamtheuser
Find the above lines and add a comma and "ia........
Jul 3 22:12:17mailserver postfix/smtpd[6195]: fatal: no SASL authentication mechanisms
Jul 3 22:12:18mailserver postfix/master[4881]: warning: process /usr/libexec/postfix/smtpd pid 6195 exit status 1
Jul 3 22:12:18mailserver postfix/master[4881]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling
This only ever happens in my experience when the authentication method is actually Dovecot. Usually the problem........
A simple way that may work for a lot of people who just need basic output for their scripts or daemons to announce an action is this:
echo "body or message" | mail -s "realtechtalk.com" user@domain.com
If you want to send a text file as the body just do this instead:
mail -s "realtechtalk.com" user@domain.com < /tmp/sometxtfile.txt
These are some ve........
Sometimes if you have a very basic configuration OpenVPN on the client side for some reason sends all traffic to the OpenVPN server IP through the tun0 which is of course impossible and creates a block or routing loop.
This is because you need to use your normal ISP/LANgateway to hit the OpenVPN server if it is remote/offsite as is usually the case. So if you are connected to the OpenVPN through say a tun0 device and your routing is set to connect to the OpenVPN&nbs........
This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help.
Here is the short end of the stick that fixed it:
sudo apt-get install mdm mate-desktop-environment
Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........
This usually happens when you are using something like an INT and try to insert a larger valuethan the maximum which is larger than "2147483647"
On a practical term I have seen this and been guilty of this error when using scripts like PHPand generating large random numbers:
$hash = mt_rand(5,9999999999999);
Obviously that many 9's are more digits than the maximum of an INT resulting in that error. Change your code accord........
Here is the only solution Ifound that works in Firefox:
*Note you could basically just copy all of the commands in bold (the rest just shows the output)
Install sqlite3
sqlite3 places.sqlite
sqlite> .clone places.sqlite-fixed
moz_places... done
moz_historyvisits... done
moz_inputhistory..........
ValueError: new value non-existent xfs filesystem is not valid as a default fs type
Pane is dead
From what Iread this is misleading and has to do with the fact that the initrd and kernel are mismatched.
This is a hard situation because for some older hardware Iam using the Centos Plus kernel which has modules that Irequire for an older server/NIC. This seems to have cropped up in the past few months and there is no simple fix........
It looks like this has something to do with APIC but I am not sure. I have similar CPUs with a different MB and BIOS that work fine on the same type of kernel. A lot of time the issue is because of the C-step setting in the BIOS.
The same thing happened on the 2.6 kernel with Centos 6 but this is a homebrew 4.4 kernel soI am not sure why it is happening when even Centos 7 (3.2) kernel works OK.
Solution - It comes down to the BIOS set........
In xplayer Iget the following error "Could not initialize supporting library.". It actually looks more like a gstreamer issue.
For those wondering what the default video player is called it is "xvid" and not "totem" anymore like previous versions.
Basically it looks like some codecs are missing when I uninstalled another program it uninstalled other programs and codecs that it shouldn't have.
I've tried installing all the gstre........
In your browser go to "about:config"
Right click and choose "New" ->"String"
The name should be:
general.useragent.override
String Value:
Mozilla/5.0 (Linux; U; Android 2.2.1; en-ca; LG-P505R Build/FRG83) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1
You don't even have to restart to make this work.........
This works for almost all ISO's Ifind (at least Linux based):
sudo dd if=CentOS-6.9-x86_64-minimal.iso of=/dev/sdg bs=20M
20+1 records in
20+1 records out
427819008 bytes (428 MB) copied, 118.233 s, 3.6 MB/s
Of course change the .iso filename above and the /dev/sdg to your desired USB drive!........
It is well known hackers, the NSA, CIA and other groups have created malware to secretly turn on your webcam and microphone on your phone, tv etc.. But fortunately on our computers and laptops we have some options.
Most webcams use the "uvcvideo" kernel module / driver. You can disable this in two ways on boot. I recommend both just as a failsafe.
Disable it on rc.local once your system boots automatically
Add the followi........
In at least Ubuntu and Mint there is nothing intuitive about configuring Java.
Execute it to get to it:
itweb-settings
You'll be able to configure different options and variables.
You can also check under Security as some of those settings could prevent applets from starting or prompting to........
sudo chmod 000 /etc/cron.daily/apt-compat
This is the easiest way to disable the cron without anything more invasive like deleting the file.
After that you won't have anymore apt-get's starting.
This can be critical for systems without much extra RAMthat is not in use. I've seen systems that have swapped and crashed over apt-get.........
It's a little tricky if you are running a 64-bit OS which most people will be.
The weird thing is that the Seamonkey website for Linux seems to only provide a 32-bit download.
seamonkey-2.49.2.tar.bz2
First unpack it
tar -jxvf seamonkey-2.49.2.tar.bz2
Try to run it
./seamonkey
XPCOMGlueLoad error for file /home/queenlazina/Downloads/seamonkey/libmozgtk.so:
lib........
One simple way to keep your server public but almost impossible to hack via SSHis to disable password authentication over SSH. This means the only way in is via your own private key that only you should have.
Edit your /etc/ssh/sshd.conf file
Set this option
PasswordAuthentication no
Restart your SSH server.
service sshd restart
........
So I have a domain "testdomain.com".
Inside test domain.com's root is the following .htaccess:
Options +FollowSymLinks -Indexes
ErrorDocument 403 /launch/index.html
Order Deny,Allow
Deny From All
Allow From 192.168.1.2
When you visit anything other than root things work fine. Eg. if you visit http://testdomain.com/somedirfile.html
It will show the right error in /launch/........
Just type the command:
localboot
By default it will boot the first local drive "0". Ibelieve you can specify a different number to boot a different device.
eg.
localboot 3
(will boot the 4th BIOS device)'........
It has been a big pain for a long-time to install Windows from a Linux environment. I used to run a windows install server and it never worked right for some reason (the install would fail on most servers).
Before getting start be sure to setup your samba share so once you boot into WinPE you can mount the install for whatever Windows you want
/etc/samba/smb.conf
[smbwinstall]
path = /tftpboot/images/winstall
guest ok = yes........
error: Could not locate RPC credentials. No authentication cookie could be found, and no rpcpassword is set in the configuration file
This is usually because the .cookie file cannot be read by the user you are running Litecoin or Bitcoin client/daemon as.
You can adjust the permissions of the file so that the user or group they are apart of has read permissions.
........
Error: Unable to apply new quota values: quota not running
Container start failed (try to check kernel messages, e.g. "dmesg | tail")
Killing container ...
Container was stopped
Error: Unable to apply new quota values: quota not running
Can't umount /vz/private/123123: Invalid argument
[root@rtt 123123]# vzquota on 123123
vzquota : (error) Can't open quota file for id 123123, maybe you need to reinit........
I've never seen this before in all of my years. Ihave some very old CDs and DVDs 12-15 years old that seem not to work in this BD-R/DVD-R/CD-R Asus drive.
The discs are fine actually and ironically they even work fine on a normal LG USB based BD-R drive!
Here are the errors in Linux:
[2914936.884924] attempt to access beyond end of device
[2914936.884927] loop1: rw=0, want=730424, limit=688384
[2914954.556873] attempt to........
Some of the cheaper or newer SSL suppliers will require this to work properly (otherwise you may be prompted that the cert is invalid when it's not the case but it will certainly scare off your users!).
In the Apache vhost conf for the domain here is what you add:
SSLCACertificateFile /path/to/your/cafile.pem
Here is a full example of an SSL Vhost config in Apache using a CA Certificate file
........
PHP Warning: Cannot load module 'XCache' because conflicting module 'apc' is already loaded in Unknown on line 0
Solution:
yum remove php-pecl-apc-*........
Getting this error on Centos 6 with PHP 5.3 when just running "php -v"
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/module.so' - /usr/lib64/php/modules/module.so: cannot open shared object file: No such file or directory in Unknown on line 0
PHP Warning: Cannot load module 'XCache' because conflicting module 'apc' is already loaded in Unknown on line 0
Solution:........
The easiest way is to use SSHand DD or a combination of netcat. SSHwill be a little slower due to encryption but is the most secure way (on two older systems the average clone speed is about 40-50MB/s). This is also OS independent as it doesn't matter what the source OS is because you are literallly cloning the drive so you retain the partition table and settings.
Clone HDD using SSH and DD........
I don't recall having this issue in the distant past but nowadays at least Debian seems to be very picky about this.
I used dd to copy one hard drive to another and tried booting it. Everything seemed fine with grub working but each time it would drop to the busybox shell. There is no particular error so this is misleading.
Normally the first things you would check are to make sure your fstab is correct (that the UUID is correct)and that you've updated grub.&........
ssh rtt@192.168.1.199
Unable to negotiate with 192.168.1.99 port 22: no matching host key type found. Their offer: ssh-dss
It looks like the DSS option is not considered secure so when connecting from newer Linux systems to an older one you will get the above error.
It can be fixed (but you should consider upgrading your SSH daemon):
ssh -oHostKeyAlgorithms=+ssh-dss rtt@192.168.1.199........
In Centos 7 the days of editing the "kernel"line and adding "single"are gone. On top of that sometimes after a new install passwords do not work, maybe you forgot your password or for some other reason you need to break in or fix your system? It could also be because you can't mount your root / or some other /etc/fstab error and many other errors.
Short Version:
1. Edit your grub settings and find the linux16 /vmlinu........
This happened on Centos for no apparent reason with no obvious issue in the logs. Data could be read fine but not written (possibly due to some corruption or out of memory issue in the OpenVZ container is the best guess).
All mysql update and insert queries failed freezing without any error log on any database and table.
Tried to restart:
service mysqld restart
Timeout error occurred trying to stop MySQL........
Centos 6 requires GLIBC 2.12 however a lot of new programs you would want to compile may need a newer glibc. You can't remove the old glibc since the whole OS is based on it but you can install the updated glibc alongside it and do an export pointing to your updated GLIBC.
mkdir ~/glibc_install; cd ~/glibc_install
wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz........
MySQL will silently truncate a larger INT than capable.
Check MySQL's own documentation here:
As we can see the maximum size of INT (which is the most commonly used) is 2147483647
A lot of coders make this mistake by using very large values such as 9999999999 but it would actually truncate to 2147483647 which is the maximum size of an INT. This is dangerous beca........
The commands below will help you reset any mysql user password.
use mysql;
update user set password=PASSWORD('thenewpass') where User='theusername';
flush privileges;
The first line says to use the "mysql" database which contains all the user info.
the second update line sets the new password "thenewpass" for the u........
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0
Remove the GEOIP from PHP:
php71w-pecl-geoip-1.1.1-1.w6.x86_64
PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the........
Stopping httpd: [ OK ]
Starting httpd: httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/h........
Install requirements:
yum -y install gmp-devel mpfr-devel libmpc-devel glibc-devel glibc-devel.i686 zip unzip jar
Download, untar, configure, compile and install GCC
http://mirrors.kernel.org/gnu/gcc/gcc-5.5.0/gcc-5.5.0.tar.gz
tar -zxvf gcc-5.5.0.tar.gz
cd gcc-5.5.0
./configure
make
make install
Now you need to cleanup th........
First find the line number:
awk '/what you are searching for/{ print NR; exit }' input-file
86
Now use sed to replace it:
sed -i 86s/.*/"your replacement text"/ $file
Here is a full sample script to automate it:
file=some/f........
This just simply outputs what you need a username and password that can be used to authenticate from .htaccess
htpasswd -nb user password
user:Gnb6uE9Lp4gt2
If you want to write it straight to a file
htpasswd -cb /tmp/somefile.pw user password
How To Use This In .htaccess
AuthUserFile /tmp/somefile.pw
AuthName GetLost!!
AuthType B........
The Linux Kernel interpretated a very high volume of real traffic as a DDOS attack so it basically ends up blocking your web server.
possible SYN flooding on ctid 42131, port 80. Sending cookies.
Simple fix edit sysctl values for max_syn_backlog
sysctl -w net.ipv4.tcp_max_syn_backlog=5000
To make them permanent edit /etc/sysctl.conf
echo "net.ipv4.tcp_........
In the "last" command in Linux by default it will show the information with the hostname (not very useful at all especially since it normally truncates long hostnames).
To get last to show the IP address use this:
last -i
The -i makes it show the numeric IP instead of hostname.........
yum -y install samba
vi /etc/samba/smb.conf
https://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-6.03.zip
mkdir syslinux;cd syslinux;unzip syslinux-6.03.zip
mkdir -p /tftpboot/libs/
cp bios/com32/modules/linux.c32 /tftpboot/libs/
cp bios/com32/libutil/libutil.c32 /tftpboot/libs/
cp bios/com32/lib/libcom32.c32 /tftpboot/libs/
#add lib path
echo "PATH libs" >> /tftpboot/pxeli........
Normally lspci will show you just like this and would suggest they are exactly the same card:
1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7)
1c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7)
lspci -vnn is the answer
As we can see one is a Gigabyte and the other is an MSI card. Wha........
This works with lspci and if it's outdated may not give you the exact manufacturer and device model.
For example take these 3 different RX 580's:
1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
1b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
1d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
You ca........
pcimodules no longer works it produces nothing probably because the format of /sys/bus/pci is different.
lspci -k doesn't work on older lspci versions.
pciutils can be compiled but it won't work if you have an old system and compile on a newer glibc.
iteriate through /sys/bus/pci/devices/*/modalias
cat /sys/bus/pci/devices/*/modalias
pci:v00008086d00001237sv00000000sd00000000bc06sc00i00
pci:v00008086d00007000sv0000000........
edit theme css:
Click "Appearance -> Editor -> Stylesheet"
http://yourblog.com/wp-admin/theme-editor.php?file=style.css&theme=twentysixteen
textarea {
color: #1a1a1a;
/*font-family: Merriweather, Georgia, serif;*/
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif........
Unable to load dynamic library '/usr/lib64/php/modules/php_openssl'
not sure how to fix this........
Check for crap in /var/lib/mysql like this
ls -al /var/lib/mysql/
total 20888
drwxr-xr-x 24 mysql mysql 4096 Oct 3 18:30 .
drwxr-xr-x 20 root root 4096 Oct 3 04:23 ..
-rw-rw-rw- 1 mysql mysql 11776 Oct 3 17:10 c:exp.exe
-rw-rw-rw- 1 mysql mysql 48128 Oct 3 17:10 c:exp1.exe........
guestmount -a kvmuserscra.img -m /dev/sda1 mount
libguestfs: error: mount_options: /dev/sda1 on / (options: ''): mount: unknown filesystem type 'ntfs'
guestmount: '/dev/sda1' could not be mounted.
guestmount: Did you mean to mount one of these filesystems?
guestmount: /dev/sda1 (ntfs)
guestmount: /dev/sda2 (ntfs)
yum -y install ntfs-3g
still........
This is not just a Linux issue but a general issue most software or hardware players cannot play the resulting exported/backed up format of .h264 from DVR security camera footage for some silly reason.
There is a simple solution in Linux using ffmpeg fortunately.
Convert the .h264 file into mp4
ffmpeg -i yourfile.h264 -codec copy video.mp4
play dvr .h264 file........
In Thunderbird in a very large folder suddenly all of my e-mail list became blank/white even though you could click on the invisible/white/blank lines and it would show the e-mails. Itried to close and reopen but only going to Folder -> Properties and clicking Repair Folder fixed it (basically it had to redownload/rebuild the entire index and all e-mails).........
This is important as unfortunately Centos may designate a package obsolete and the replacement breaks everything (eg. you have a config file and the new replacement is not at all compatible with it and it breaks your application).
This is where disabling obsoletes comes into play, it can be done from yum but it doesn't work at the time I find.
yum --setopt=obsoletes=0 install someapp However Ifind it still installs the new app and not the one you ask for........
I'm having trouble making it work on very shaky video the result seems kind of warped/blurry/fish eye like and not as good as some other examples I've seen:
ffmpeg -i MVI_1285.MOV -vf vidstabdetect=shakiness=10:accuracy=15 -f null MVI_1285.trf
ffmpeg -i MVI_1285.MOV -vf vidstabtransform=smoothing=30:input="transforms.trf" MVI_1285.MOV.mp4
I've played around with the shakiness, accuracy etc.. but not the smoothing part.........
I am not sure why this happened I think it's because the file was in use by another duplicate process or script.
userdel user
userdel: cannot lock /etc/passwd; try again later.
........
You are using Centos 5 which is deprecated so nothing in yum will work until you follow this post to use the vault:
http://realtechtalk.com/Centos_59_Working_Vault_Repo_file-1921-articles
yum update
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* epel: fedora-archive.ip-connect.vn.ua
Traceback........
Have you have a command ask a question such as cp or move?
You can do this:
echo y|cp * /tmp/othercopy
However it may still fail if your bashrc aliases have the "-i" flag see this post here.........
This through me for a loop when I would do a cp -rf or mv -f nothing would get overwritten even if piping y or yes to the command.
Type alias and you'll see why:
alias cp='cp -i'
alias l.='ls -d .* --color=auto'
alias ll='ls -l --color=auto'
alias ls='ls --color=auto'
alias mv='mv -i'
alias rm='rm -i'
The -i is a safeguard against messing things up but however does mess things up worse when you know what........
iptables -t NAT -A PREROUTING -s 24.30.44.0/24 -j DNAT --to-destination 10.10.10.1
iptables v1.4.7: can't initialize iptables table `NAT': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
Solution
# it is case sensitive "nat" and DO NOT use "NAT" or you will get this error!
iptables -t nat -A PREROUTING -s 24.30.44.0/24 -j DNAT --to-destination 10.10.10.1........
Linux Set Date
date -s "YYYY-MM-DD HH:MM:SS"
date -s '2014-12-25 12:34:56'
BSD Unix Set Date
date yymmddhhmmss
date 170809121156........
I have never had this error on Linux and this is running FreeBSD as root:
Wed Aug 9 04:29:34 2017 us=329050 Cannot allocate TUN/TAP dev dynamically
Wed Aug 9 04:29:34 2017 us=329832 Exiting due to fatal error
The Solution you need a kernel module that is for some reason not automatically loaded like Linux:
kldload if_tap........
This happens if you are running a kdenlive script from the shell of a remote machine without using SSH "-X" forwarding and it will also cause any areas where you write text to be a white screen for that duration.
melt FusionFestival.kdenlive
No LADSPA plugins were found!
Check your LADSPA_PATH environment variable.
[producer_xml] failed to load transition "qtblend"
[producer_xml] failed to load transition &q........
virt-list-partitions kvmusertest.img
/usr/bin/supermin-helper exited with error status 1.
To see full error messages you may need to enable debugging.
See http://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs at /usr/bin/virt-list-partitions line 177.
#solution
update-guestfs-appliance........
sudo mount -a
Unable to find suitable address.
[35758.706993] CIFS VFS: Error connecting to socket. Aborting operation.
[35758.707247] CIFS VFS: cifs_mount failed w/return code = -111
[35795.476160] CIFS VFS: Error connecting to socket. Aborting operation.
[35795.476346] CIFS VFS: cifs_mount failed w/return code = -111
When the above happens "Unable eto find suitable address" it usually means the smb nam........
myisamchk can fix it
But be careful and use the right options to avoid losing data. In fact if you haven't you should make a backup or at least manually copy /var/lib/mysql.
Replace "YourDB" with the name of your database
Replace "yourcrashedtable" with the name of your crashed table.
The -o option is the safest and should avoid dataloss whereas -r is more aggressive and is a last option (I have lost data using -r and........
To get the first X letters of a word:
It's very simple you can just pipe it to head with
-c 1 (gives the first letter and so on)
-c2 (2 gives the first 2 letters).
echo "dsjfsdlksjdklf;jlsd;kflasdj;kl"|head -c 2
Returns ds
To get the last X letters of a word:
Now we use tail with -c but it works differently. ........
Centos 5 is not supported running yum will produce an error like this:
YumRepo Error: All mirror URLs are not using ftp, http[s] or file.
Eg. Invalid release/
removing mirrorlist with no valid mirrors: /var/cache/yum/base/mirrorlist.txt
Error: Cannot find a valid baseurl for repo: base
Solution - Update this file CentOS-Base.repo
# CentOS-Base.repo........
Just a note before you do this you should have a sure, guaranteed way into the system such as local, KVMor preferably publickey making bruteforce SSH absolutely impossible since there is no password to bruteforce and even if someone knew the password they wouldn't be able to login except from the local console (presumably you should make sure no one unauthorized has physical access).
1. Edit /etc/ssh/sshd_config
Find the section like this:........
A great way when moving your equipment to a new location, new router/switch etc to help confirm what MAC has what IP:
for ip in `arp -na|awk '{print $2}'|sed s/(//g|sed s/)//g`; do
echo ping $ip
ping -c 1 -w 1 $ip > /dev/null
if [ "$?" == 0 ]; then
echo "$ip UP"
fi
done........
I have never had this error on Linux and this is running FreeBSD as root:
Wed Aug 9 04:29:34 2017 us=329050 Cannot allocate TUN/TAP dev dynamically
Wed Aug 9 04:29:34 2017 us=329832 Exiting due to fatal error
The Solution
You need a kernel module that is for some reason not automatically loaded like Linux:
kldload if_tap........
First of all check to see which version if any you have available for a downgrade:
apt-cache showpkg packagename
Downgrade/Install old package:
apt-get install package=version
Example
apt-cache showpkg caja
Package: caja
Versions:
1.10.3-1+rafaela (/var/lib/apt/lists/packages.linuxmint.com_dists_rafaela_import_binary-amd64_Packages) (/var/........
In Debian/Ubuntu this is called "holding".
To hold/exclude a package from being installed or upgraded:
sudo apt-mark hold packagename
To allow the upgrade/installation unhold:
sudo apt-mark unhold packagename........
Intel NUC J3455 vs Vorke V1 J3160
Both are excellent units but the J3160 is nicer if you require even lower power usage (6W vs the Intel 10W). The price is attractive on the Vorke V1 as well. It's been said that the Intel J3455 NUC has a buggy BIOS and some other issues that require attention.
The Intel J3455 is still nice because it has 2 RAMslots but it does get hotter due to lack of fan.
The Vorke V1 runs cooler, uses less power an........
sudo tar --ignore-failed-read -czvf mycomputer-backup.tar.gz --exclude=/home/otheruser/* --exclude=/proc/* --exclude=/sys/* /
Note the --exclude clauses and modify/add according to your needs........
When using the .sh script the rendering doesn't work after an upgrade of related packages to kdenlive.
kdenlive (kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1)) with affine or composite transitions was fine but is now broken during the time of transition it is just a white screen.
The previous version was fine:
kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1
But now I can't find it or install it:........
[1035724.274610] [drm:intel_pipe_update_end [i915_bpo]] *ERROR* Atomic update failure on pipe A (start=62076478 end=62076479) time 102 us, min 894, max 899, scanline start 893, end 900
W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1.bin for module i915_bpo
I've been getting those errors on a J3455 NUC box with the latest kernel on Linux Mint 18.2. When updating the initramfs I also got the error about the firmware........
cagecoin linux compile:
sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev
libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev
libssl-dev libdb++-dev libminiupnpc-dev
Solution:
sed -i s/"BOOST_LIB_SUFFIX=-mt-s"/"#BOOST_LIB_SU........
Solution:
Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt
sudo aptitude install wine
The following NEW packages will be installed:
ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6
wine1.6-amd64{a} wine1.6-i386:i386{a}
The following packages will be REMOVED:........
When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right.
Solution for me:
My example uses 3 videos in total so "n=3" and a=1 to include audio.
ffmpeg -threads 12 -i file1.mp4 -........
I believe from what I've read that this card's driver doesn't support the features after trying all known troubleshooting methods.
ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload -c:v hevc_nvenc -profile main -preset slow -rc vbr_hq -c:a copy uservideoRendered.mp4-test
ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload........
Essentially a program I was running for mining did not terminate properly with Ctrl+C it is listed as defunct and cannot be killed, kernel is tainted and normal tricks to disable the port are impossible the dev and sys entries for the device cannot be browsed or interacted with in any form without a lockup of the request. The only solution is to reboot due to the kernel taint as far as I can find so far.
[1130246.811056] INFO: task minerd:21861 blocked for more th........
#if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used
wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2
tar -jxvf ffmpeg-3.3.2.tar.bz2
cd ffmpeg-3.3.2/
./configure --disable-yasm
install prefix /usr/local
source path ........
This container won't start after exhausting its memory. There are no relevant or helpful messages in dmesg or vzctl.log as well. Standard troubleshooting such as disabling PPP etc has not helped.
2017-07-06T23:33:29-0400 vzctl : CT 888171 : Locked by: pid 166029, cmdline vzctl start 888171
2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container already locked
2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container was stopped
2017-07........
The old MBR 512 bytes partition table is no longer valid if you are using GPT.
To copy a GPT table with dd to another disk do it like so:
Below sda is the source disk and destination disk is sdb (change to meet your needs).
dd if=/dev/sda of=/dev/sdb bs=1536 count=1
You can also use dd to backup your partition table like normal but with the bs of 1536
dd........
Done on Centos 7.3 very important as clearly based on older guides it was a lot easier and more simpler! Hint do not use grub2-install!
One huge caveat if you are an oldschool user or sysadmin who has avoided UEFIbooting
The normal way will not work here if your Centos was using UEFI. Newer systems use it by default.
The easiest way to check is to do an fdisk -l if your sy........
user@box:~$ sudo tune2fs -l /dev/md99
[sudo] password for user:
tune2fs 1.42.9 (4-Feb-2014)
Filesystem volume name:
Last mounted on: /mnt/md50
Filesystem UUID: 976a8655-2619-4587-878c-dab07f7b7652
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Fi........
Still looking for the solution
Working Solution 2017/07
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys D46F45428842CE5E
Solution
gpg --keyserver hkp://subkeys.pgp.net --recv-keys D46F45428842CE5E
gpg: requesting key 8842CE5E from hkp server subkeys.pgp.net
gpg: keyserver timed out
gpg: keyserver........
This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether.
Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........
I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us
yum install automake curl openssl-devel libcurl-devel gcc gcc-c++
yum -y install kernel-devel-`uname -r`
yum -y install unzip
#the........
This is a VIA made VL805 USB 3.0 Chipset with 4-ports and MOLEX powered. First of all this unit was cheap at about only 9 USD with fast shipping. My biggest concern was if this was a quality unit and would it really give you full USB 3.0 speeds (some people reported with similar cards that for some weird r........
Why won't my Linux Mint boot after I manually installed a new kernel?
eg.
apt-get install linux-image-newerone
Do this
dpkg -l|grep linux-image|grep extra
ii linux-image-extra-3.16.0-38-generic 3.16.0-38.52~14.04.1&nb........
When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help).
At first cudaminer will give you these errors:
stratrum_recv_line failed
...retry after 15 seconds
GPU #0: Geforce 210 with compute ca........
sudo mkdir -p /etc/X11/xorg.conf.d/
sudo vi /etc/X11/xorg.conf.d/20-intel.conf
Type "i" and enter the following:
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option &........
[2017/06/12 21:14:04.991169, 0] ../source3/param/loadparm.c:3259(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/dump failed. Permission denied
Issue was the parent directory needed chmod 755........
**** Warning: can't process font stream, loading font by the name.
Can't find CMap Identity-UTF16-H building a CIDDecoding resource.
Warning: falling back to Identity ordering
**** Error reading a content stream. The page may be incomplete.
**** File did not complete the page properly and may be damaged.
**** This file had errors that were repaired or ignored.
****........
Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues.
Take for example the error messages from Linux Mint:
[804829.895414] usb 1-1: USB disconnect, device number 11
[806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........
This is mainly the case on Centos but applies to other distros and situations. If you are running programs in the background with the &, at least in Centos it is usually not honored and if you quit or are disconnected the backgrounded programs will be sent sighup and be shut down.
The simplest way around this instead of using & is to start any programs or commands with "nohup"
Eg.
nohup yourscript.sh........
Finally after ages I found the solution which is on many pages on the net but not obvious and should have been standard or more common info!
Instant Solution:
Type this into the terminal (unfortunately the driver config menu doesn't have the option as itis hidden):
nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceCompositionPipeline = On }"
Make permanent
Cli........
Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user:
Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4
Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........
I was sure this was a Centos bug with OpenSSL, Apache, MySQL or even PHP. I tried everything but nothing helped. One clue is that if you check the Apache logs you will see nothing in the access logs until minutes later (this means Firefox has not even passed your request to the remote Apache/htttpd server).
When even accepting the invalid certificate message that would show up minutes later when trying to "View the Certificate" Firefox would freeze. This bu........
These errors believe it or not are simply because of not being the root user or running with sudo! However if you didn't know to try as root you'd think there was a problem with your burner or disc Essentially it looks like without root you cannot send the required scsi commands to continue writing. Ithink cdrecord should have built-in tests or safeguards to see if it has the permissions to run the required commands.
I guess for more advanced users the idea is simila........
Transaction Check Error:
file /usr/lib64/php/modules/fileinfo.so conflicts between attempted installs of php-pecl-fileinfo-1.0.4-2.el6.rf.x86_64 and php-common-5.3.3-49.el6.x86_64
solution you can't install php-pecl-fileinfo it seems to be incompatble with the php5.3 being installed:
yum --exclude=php-pecl-fileinfo --skip-broken --disablerepo=epel install php-*........
I get the following error "Installer Crashed" on 18.1 MATE 64-bit when installing by NFS/PXE. Yet it was able to at least detect and use my NIC (perhaps the driver was only activated because of PXE/NFS being used)?
When using 18.1 Cinnamon on CD the NIC does not work but the installer did succeed. However it doesn't work right, I can't login graphically and get some Cinnamon OOMerror but how can this be with 8GB of RAM straight from login?........
*Update so this doesn't work it must be something to do with the path of nfs or something else but the installer fails with "Installer crashed" at the end whereas with the CD/USB it works.
This assumes you've already installed and configured a separate PXE/DHCP server somewhere else and your /tftpboot directory is setup.
This is for Linux Mint 18.1 but generally applies to most versions although you may have tro change things like "casper"........
Just type the following in the bash/terminal shell to enable the blue LED light on the Coolermaster CM Storm keyboard:
xset led 3
To make it automatic and permanent execute the following as root:
echo "xset led 3" >> /etc/rc.local
This is a fairly nice gaming keyboard whichI bought because I type very quickly and the cheap standard keyboards simply can't keep up!........
This happens on any file an even just typing "vi"whereas it never happened before. I suspect an update or environment variable is causing this issue
When entering vi I get this weird stuff
line 58:
E488: Trailing characters: t_Sbet
line 63:
E171: Missing :endif
When exiting vi I get this weird stuff
t_Sb=^[[4%?%p1%{1}%=%t........
1.) gedit/pluma
both very good the only thing I wish is that there was an autosave for unsaved documents! The only other competitor which is similar but I prefer less is kwrite (although I think kwrite may have proper autosave)
pluma seems to be a renamed gedit yet gedit is still installable on Linux Mint)
........
Normally the below would indicate a failing or failed drive. In this case the SATA port was unplugged and sometimes the Linux kernel/motherboard even with AHCIjust don't play nice and can't handle it.
What happened is Iplugged in a new drive after removing another one. However the log shows that after the old drive was plugged in the Linux kernel kept complaining thinking the drive was there but not responding properly. This continued even with reseating........
If you have this problem: http://realtechtalk.com/mencoder_bmovl_error_vf_bmovl_Unknown_command_Ignoring_-1860-articles
Then ffmpeg is for you. Go here if you are using Linux Mint and cannot find or install it to use an external PPA........
Based on this tutorial: http://www.linuxjournal.com/content/overlay-images-video-using-mplayer-and-mencoder
mencoder -oac pcm -ovc raw -vf bmovl=0:0:tfifo -o $output $file
vf_bmovl: Unknown command: ''. Ignoring. ........
I've had this issue since Ubuntu 9 and now even on Linux Mint 17 no matter what latest version of the Nvidia proprietary driver that I use. It just becomes slower and slower and only gets better after rebooting or restarting Xorg.
Someone here has it as well
https://askubuntu.com/questions/822449/graphics-becomes-slow-after-a-while/917886
It's very fru........
This is very annoying that ffmpeg is missing from Linux Mint! They have ffmpeg2theora which is a totally different codec and does not work as ffmpeg does at all (it is basically totally different).
However on Linux Mint 17 I was able to use a Ubuntu PPA and sucessfully install ffmpeg!
https://launchpad.net/~mc3man/+archive/ubuntu/trusty-media
Adding this PPA to your system........
Using Apache 2.2 and PHP5.6 PHPBB3 is very slow to respond. Actually for some reason it takes so long to even register a log entry in access_log as in several seconds or a few minutes later it shows up in Apache. All other vhosts and Apache access stops working and freezes until the request to access PHPBB3 slowly completes.
It seems to randomly be slow if you stop using it whether for posting or reading the forums. I've migrated to different machines including........
apachectl -l
Compiled in modules:
core.c
prefork.c
http_core.c
mod_so.c
It is "prefork.c" so in httpd.conf these settings are what you would use (if you use worker.c it won't have any impact):
StartServers 2
MinSpareServers 5
MaxSpareServers&nb........
espeak - is horrible and sounds very old and robotic
echo "hello there"|espeak
#don't know how to use
mbrola and plugins
cicero
jovie just seems to be a graphical interface to espeak
There is also sbreader/sapi
Google's Text To Speech Works Quite Well
#!/bin/bash
say() { local IFS=+;/usr/bin/mplayer -ao alsa -really-quiet -noconsolec........
A lot of times these files seem to lag and be incredibly slow even if just a few dozens rows of data.
Here is how you can convert it with "gnumeric":
ssconvert file.xlsx file.csv
You may get lots of weird errors like this but the conversion seems to work fine:
(ssconvert:15244): GLib-GObject-WARNING **: g_object_set_valist: object class 'SheetObjectImage' has no property named 'style'........
This command will generate a random password using all letters and numbers that is 20 characters wrong based on /dev/urandom (for the most truly random output).
echo `< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-20};echo;`........
This error is commonly due to Java security or TLS settings but there is a second issue with forwarded ports that also causes it.
1. Java Security/TLS Settings issue:
This article has the solution to change them all in Linux automatically
2. Port Forwarding Issue if your Avocent DSR is behind NAT/private IP........
Centos 7 is no cakewalk, there are many fundamental features and basic utilities that are missing or even completely renamed or different!
Another shocking thing is to check your NIC it is set by default to not turn on when booting!
And by the way there is no more standard eth0 the NIC convention is now "enp0s3"
vi /etc/sysconfig/network-scripts/ifcfg-enp0s3........
gpick is a great and simple tool now that I now how to use it
sudo apt-get install gpick
The trick is to find "the swatch"
I was in a rush and was frustrated that it wouldn't work how Iexpected and I had to memorize the hex code of the color my mouse was over.
There is something it tells you to do which is "Click on the swatch area" (click onthe honeycomb graphic area that is the s........
There are usually two reasons for this.
#1 The most common is that you need to enable the -r (recursive) flag with zip to make it recurse into directories.
So the solution is to use -r
zip -r somefile.zip yourfiles
#2 If you are using bash scripting based on ls without the full path or for some other reason the full path is missing, zip looks for the files in the current directory so this will always fail.........
Normally an ls will just produce the actual contents of the current or target directory eg.
ls mydir
myfile1
myfile2
myfile3
But what if you need to find the full or relative path to another program that cares whether that be zip or etc.?
You need the "-d" switch and the asterisk inside the actual directory.
ls -d mydir/*
mydir/myfil........
To check if a file/directory is a symlink in bash:
if [ -L/some/path/file ]; then
echo "OKwe're a symlink"
fi
That's all there is to it.........
A common mistake is people think you should tell the li padding to be 0px but this is wrong.
All you need is the following code in line:
your item
your item
In a css class:
.yourclass {
ul.margin: 0px;........
tar -xvJf somefile.tar.xz
It is very annoying that so many are now using the .xz archive format as standard instead of .tar.gz but nevertheless above is how you would extract it with the "J" flag (not lower case j as that is for bz).........
whois in Linux is incredibly out of date and does not seem to recognize most new TLDs domains, but there is a quick and easy tip/hack/tweak for this.
An example of new TLD's site as .review .site .club
whois somesite.club
No whois server is known for this kind of object.
bash to the rescue
Now I did try to apply this in .bashrc but DONOT! Ithink the * wil........
This is especially helpful if you run your own servers. If you are presented with an error message or warning that the signature has changed or does not match the IP/domain you are connecting to you always want to verify manually.
So your e-mail/web client will show you an SHA-1 fingerprint like this:
"Could not verify this certificate because the issuer is unkown" or other reasons such as a mismatch in IP/domain.
It will also show you........
Ijust use "ufraw" and it does the trick perfectly. Now Iwish I could figure out how to batch convert them into .jpg with ImageMagick (it seems support for .raw is not guaranteed or it has to be compiled in).
apt-get install ufraw........
ecryptfs-mount-private
Enter your login passphrase:
Inserted auth tok with sig [ee16d84] "into the user session keyring
mount: No such file or directory"
[ 156.118113] ecryptfs_mount: kern_path() failed
[ 156.118431] Reading sb failed; rc = [-2]
[ 164.233055] traps: mate-notificati[3472] trap int3 ip:7f43d7002c13 sp:7fff162c6600 error:0
[ 166.017061] ecryptfs_mount: kern_path() failed........
In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below.
mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore.
[45817.162728] ata4: exception........
1.) Replicate the number of partitions in your new drives.
gdisk /dev/sda
gdisk /dev/sdb
I created 3 partitions of the same same size.
partition #1: +1G (/boot)
partition #2: +60G (swap)
partition #3: rest of it (/)
#note if you are using GPT/gdisk you need to create separate a partition at least 1MB in size (in my case I would a 4th partition and mark it type ef02).........
The solution is simply "tidy"/Tidy-HTML. It will take your poorly formatted HTML code (and I mean files that span just a few lines that are unreadable) and fix it up.
Note the command below does everything in place. *Make sure you take a backup of all .html files*
It also seems to break html5 code/templates so beware.
tidy -im yourfile.html
An automated way in bash:........
The "passwords do not match" implies or makes it appear that your auth code is wrong but actually you have to click "View additional settings" and then see there are 2 password fields to manage the domain once it is transferred (the password is typed twice for confirmation). Simply fill out a password twice or remove the first password fields contents and all will be well.........
What code is being returned or where is a URL/domain redirecting you to? Curl makes this easy and simple:
curl -Iyourdomain.com........
mdadm won't boot in Ubuntu/Mint/Debian anymore.
You just get the following in a loop:
mdadm: CREATE group disk not found
Incrementally started RAID arrays.
Incrementally starting RAID arrays...
mdadm: CREATE group disk not found
Incrementally started RAID arrays.
Incrementally starting RAID arrays...
mdadm: CREATE group disk not found
Incrementally started RAID arrays.
Incrementally starting RAID arrays...
mdadm: CREATE group dis........
At first I thought it's just not possible but there is actually an option that can be enabled to make symlinks work with Samba.
Then I put this under the [global] section
Note: It's "wide links" and not "wide symlinks" (some other sites have incorrect info which was a frustrating waste of time :))
Add this to your smb.conf
follow symlinks = yes
wide links = yes
unix ex........
Add this to the .htaccess file
#right/working:
AddType application/x-httpd-php .html .htm
#wrong (won't work in many cases):
AddHandler application/x-httpd-php5 .html .htm........
Solution:
yum -y install --skip-broken package-you-want-to-install
Packages skipped because of dependency problems:
php56w-mysql-5.6.30-1.w6.x86_64 from webtatic
Error: Multilib version problems found. This often means that the root
cause is something else and multilib version checking is just
pointing out that there is........
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was
12: Timeout on http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds')
Error: Cannot find a valid baseurl for repo: base
You would think this should be fine and simple like using a proxy with most other software?
However........
Get the python "warc extractor" from here. WARC just seems to be such an unnecessary and complicated format. Why not use tar, rar, zip etc...?
./warc-extractor.py -dump content !http:content-type:pdf yourfile.warc........
In short the solution is just to use vgremove for the actual /dev/mapper device:
vgremove /dev/mapper/backups-backuplv
box mnt # mdadm --manage /dev/md8 --stop
mdadm: Cannot get exclusive access to /dev/md8:Perhaps a running process, mounted filesystem or active volume group?
box mnt # lv
lvchange lvconvert lvcreate l........
This was a surprising bug but I unplugged all drives for an array md127. At first it was just 1 drive and mdadm seemed to notice this. I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it. This created problems trying to unmount it or even to stop this array with mdadm freezing.
As for how to fix it I can only think of making sure you are not in a mounted path of........
Cannot even "Browse Network" when clicking on "Windows Network"
Unable to mount location
Failed to retrieve share list from server: No such file or directory
logs:
[2017/02/14 00:16:44.271314, 0] ../source3/nmbd/nmbd.c:58(terminate)
Got SIGTERM: going down...
[2017/02/13 17:35:41.797944, 0] ../lib/util/become_daemon.c:124(daemon_ready)
&........
convert -trim yourimage.png
That's all there is to it, very simple, clean and quick!........
This seems to only happen from a bash script but it's not clear why it works from the terminal but not from a bash script.........
Many users still are not aware but simply patching OpenSSL does not secure you against many known and easy to exploit attacks that will render your encryption useless by an attacker.
Use the following setings in /etc/httpd/conf.d/ssl.conf
SSLCipherSuite "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH EDH+aRSA !CAMELLIA !SEED !3DES !RC4 !aNULL !eNULL !LOW !MD5 !EXP !PSK !........
This actually only happened after an e-mail server ran out of space due to run away log files. Normal Desktop clients were not affected. It appeared to be a bug in K9 mail but even reinstalling/wiping all settings did not fix it (read e-mails would still not reappear).
This is moreso a bug in Dovecot where it probably messes up the index files.
How do you fix this in Dovecot/your e-mail server?
You need to delete the do........
This happened while updating Linux Mint/Debian/Ubuntu on a remote SMB/Samba share.
Solution
After waiting for updates to complete things will work normally but it really is strange that the service actually stops working or is disabled for so long during the update. It is likely the update process stops the serivce and only restarts after the update is complete.........
The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files.
UPDATE user SET password=password("newpass") WHERE user='root';
flush privileges;
ERROR 2013 (HY000): Lost connection to MySQL server durin........
The "-S" switch is important as it works with sockets if you use "-f" it will not detect the socket file is there.
if [ ! -S "/var/lib/mysql/mysql.sock" ]; then
echo "Socket does not exist, restarting"
service mysqld restart
fi........
Disclaimer, before starting this I do not like ioncube, it is great to protect your source code, but a big pain to setup this extension since it has to be done manually. Further, fi you do a PHPupdate ioncube may no longer work, causing important sites or services to not work (I wish authors would take another approach).
1.) Download from here:https://www.ioncube.com/loaders.php
2.) Extract the contents and co........
PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the chosen SHM segment size is higher than the operation system allows. Linux has usually a default limit of 32MB per segment. in Unknown on line 0
PHP Fatal error: PHP Startup: apc_shm_attach: shmat failed: in Unknown on line 0
This error is not at all fun because it actually prevents Apache/httpd from starting or working at all. It will........
170110 5:35:23 [Note] /usr/libexec/mysqld: Normal shutdown
170110 5:35:23 [Note] Event Scheduler: Purging the queue. 0 events
170110 5:35:23 InnoDB: Starting shutdown...
170110 5:35:24 InnoDB: Shutdown completed; log sequence number 0 12765401
170110 5:35:24 [Note] /usr/libexec/mysqld: Shutdown complete
170110 05:35:24 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended........
An easy way to pay companies and friends/family since PayPal does not have an option when sending money to make it a subscription:
"business" = The e-mail or PayPal ID of the person/organization to pay to.
a3 The recurring amount "eg. 115" will be 115 USD
p3 The time period (eg. 2)
t3 Unit of time period m=monthly,w=weekly,y=yearly
item_name = "the note/product service reason you are paying ha........
# yum -y install qemu-kvm
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: mirror.lzu.edu.cn
* elrepo: ftp.utexas.edu
* epel: ftp.jaist.ac.jp
* extras: mirrors.aliyun.com
* openvz-kernel-rhel6: mirror.fdcservers.net
* openvz-utils: mirror.fdcservers.net
* updates: mirrors.nwsuaf.edu.cn
Resolving Dependencies........
sudo fdisk /dev/sdh
WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: The size of this disk is 8.0 TB (8001563221504 bytes).
DOS partition table format can not be used on drives for volumes
larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID
partition table format (GPT).
The device presents a l........
You are checking your MySQL logs in /var/log/mysqld.log and come across an error like this:
161222 18:03:40 [ERROR] /usr/libexec/mysqld: Table './eximstats/sends' is marked as crashed and last (automatic?) repair failed
The Solution:
cd /var/lib/mysql/eximstats
myisamchk -r sends.MYI
- recovering (with sort) MyISAM-table 'sends.MYI'
Data records: 71129........
forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X
forcedeth 0000:00:08.0: eth0: MSI enabled
forcedeth 0000:00:08.0: eth0: no link during initialization
ADDRCONF(NETDEV_UP): eth0: link is not ready
forcedeth 0000:00:08.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 1 18:21:32 box15 kernel: forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
Dec 1 18:21:32 box15 kernel........
If you want to make sure only a certain IP can access your server for any service or protocol here is a way to do it (just be sure you have access to the IP(s) mentioned or you will be locked out).
iptables -F
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -p tcp -s IP.IP.IP.IP -j ACCEPT
iptables -A INPUT -j DROP
serv........
The only solution after trying many suggestions was to simply restart the "vz" service (definitely not preferable).
Even doing an ifdown and ifup for venet0 did not help.
ifup venet0
Bringing up interface venet0:
Configuring interface venet0:
net.ipv4.conf.venet0.send_redirects = 0
RTNETLINK answers: Network is down
Some errors from log:
CPT ERR: d2dc60........
md127 issue, it should be /dev/md3 per mdadm.conf
Any time something is mounted as md127 it almost always means there is no entry for this mdadm array in the mdadm.conf in initramfs (which is separate from your actual /etc/mdadm.conf).
cat /etc/mdadm.conf
ARRAY /dev/md3 metadata=1.2 UUID=b6722845:381cc94e:7a2c5b5f:8e3b7c4f
The reason for this is something strange, most Linux OS's bizarrely always keep their own copy of /etc/mdadm.con........
Now many people report this card simply not working in various Linux distros and kernels. My issue is different, it always works at 100mbit (eg. plugged into a 100mbit switch) but no matter what 1000M/gigabit switch I would try, it would never work.
The link would be up (the lights were on) and the OS detected the link as being up as well but it wouldn't work at all and could not pass data in or out (not even a ack/ping).
There is one simple solution and command........
M4A is a weird format, so you have to be creative here is a quick copy of what I did.
Basically you need to convert to .wav to make use of them and thenI converted the resulting .wav into an mp3 (nice small file size and basically universally playable):
=======
sudo apt-get install mpg321 mp3gain faad normalize lame
faad "Voice 002 (copy).m4a"
faad "Voice 002 (copy).m4a"........
Tired of checking iotop and seeing that your drbd partition is using 99.99% of io all the time and finding your drbd device performs slow in general?
This is especially an issue in versions of DRBD in the 8.3 tree in particular one documented case is on "8.3.13" but it likely applies to other devices.
The symptoms are that resyncing is fine and normal but any reasonable amount of activity is very slow and lagged and creates a high server load and con........
To disable NCQ in the Linux kernel (change sda to match your device).
echo 1 > /sys/block/sda/device/queue_depth
To enable NCQ (change sda to match your device).
echo 31 > /sys/block/sda/device/queue_depth........
When installing Windows 2012 I cannot get around that error for some reason it just keeps on happening.
code:0xc0000005........
Your cPanel may not work if you enter your non-main IP when setting it up. The way to fix it is to go back to the setup screen by removing the following file:
rm /etc/.whostgrft........
vzkernel-2.6.32-042stab116.2.x86_64.rpm&n........
We've all done this at some point, you work on the wrong shell window and this was my first time making this mistake but I deleted a partition table in fdisk, recreated it and saved it with "wq" and even ran partprobe! If you haven't rebooted yet then you can still recover your partition table, otherwise you're in big trouble.
Fortunately since it was a live system and in use the kernel still had to use the old table like below:........
migrating from an old OpenVZ (Centos 5) to new OpenVZ (Centos 6)
Also if migrating from 32-bit HN to 64-bit your RAM will probably be much bigger than it should be!
16x bigger
eg. 32bit HN:
total used free shared buffers cached
Mem:&nb........
I still cannot understand how this would not be enabled by default and I struggled to find the reason why with manually installing samba etc.. wondering why the option for sharing was not in the menu.
On Linux Mint "MATE" the package is called "caja-share" and on Cinnamon it is called "nemo-share" so edit the below command as necessary:
*Also note that the "samba" package is necessary as it is not inst........
Syncing private
Live migrating container...
Syncing 2nd level quota
11000: invalid option -- F
Usage: vzdqload quotaid [-c file] commands
Loads user/group qouta information from stdin into quota file.
-c file use given quota file
Commands specify what user/group information to load:
-G grace time
-U disk limits........
This happened while an mdadm array was syncing, all access from writing a new blank file to opening a small .txt file was very slow:
[222117.312078] kjournald starting. Commit interval 5 seconds
[222117.685060] EXT3-fs (md0): using internal journal
[222117.685096] EXT3-fs (md0): mounted filesystem with ordered data mode
[222122.376847] kjournald starting. Commit interval 5 seconds
[222122.602825] EXT3-fs (md2): using internal jour........
You may get this after a long time of not rebooting but especially if you have rsync'd a / partition or deployed an image to another VPS or computer, you will often have this issue.
The good thing it usually just takes a reboot.
Here is more info from Centos........
Errors like this are shown on high usage servers and ports so it is common to see it on http and even imap ports:
possible SYN flooding on port 80. Sending cookies.
The Linux kernel will even detect flooding on OpenVZ containers:
possible SYN flooding on ctid 6000, port 993. Sending cookies.
In many cases this is not an issue and is more so simply a result of regular, but high usage traffic.........
In Firefox I cannot connect to any website, proxy is disabled and outside network access is confirmed, no system or manual proxy was set on this Linux Mint/Ubuntu system. Normally this can be caused by proxy or DNS problems and the weird thing is that traceroute and ping to other IPs worked fine but even connecting to sites by IP was not working.
The connection was reset
The connection to the server was reset while the page was loading.........
kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3)
Varying opinions are out there but in general it seems like the most common culprit is a lack of privvmpages, with a modern OpenVZ system the best way is to set privvmpages as equal to what your RAM is and this has resolved the messages on another system.
If it's truly a TCP issue you can adjust the following parameters:........
I wanted to use Astrachat because it seems to be the only app that has video, pic and file sharing for Jabber butI cannot even connect despite any other client working fine including Xabber and others.
astrachat "Oops.. We can't connect to the account that you provide above. Please recheck your account detail".
Unfortunately to make it worse there doesn't seem to be any error log or more details about the issue.
The jab........
There was only one solution here and it was the following:
edit /etc/httpd/conf/httpd.conf
Comment the lines for the Mime Magic Module:
# MIMEMagicFile /usr/share/magic.mime
# MIMEMagicFile conf/magic
*Don't forget to restart Apache and clear your browser cache twice
I was using DefaultType and ForceType a........
Usually the cause is inexplicable because some things just don't work correctly even when calling all commands by their full path.
Usually adding the following to your crontab file at the top will fix/solve the issue:
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
........
This can happen because port 80 is not open, or your license has expired and/or your IP is out of date and also if the license server itself from cPanel is having issues.
In most cases as long as you have a valid license the following command will solve it:
/usr/local/cpanel/cpkeyclt
Updating cPanel license...Done. Update succeeded.
Building global cache for cpanel...Done
Cannot........
pip install obfsproxy
/usr/lib/python2.6/site-packages/pip/_vendor/requests/packages/urllib3/util/ssl_.py:90: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.
InsecurePlatformWarning
You are using pip version 7.1.0, however version 8.1.1 i........
There was a problem importing one of the Python modules
required to run yum. The error leading to this problem was:
No module named yum
Please install a package which provides this module, or
verify that the module is installed correctly.
It's possible that the above module doesn't match the
current version of Python, which is:
2.7.9 (default, Apr 21 2016, 16:51:58)
[GCC 4.4.7 20120313........
Simple solution install python-dev
sudo apt-get install python-dev libyaml-dev libpam-dev........
This is using find and -mtime in Centos Linux, it simply takes "n" (which is a day) as a number and you can specifiy a + or - to say older or less than a certain age.
# (show everything older than 1 day)
find . -mtime +1
........
For themes and custom CMS setups, the typical HTML theme is not ready to go at all but here are some common sed commands (search and replace that will get most of them working without breaking as you'd expect).
The problem is that often the theme directory will be separate from the content and this will break the relative paths that these themes use.
sed -i s/'href="'/'href="/themes/yourtheme/'/g index.html
sed -i s/'src="'/'src="/themes/y........
cp -a /your/source/. /your/dest/
-a preserves all file atributes and symlinks
the "." at the end of /source/ includes all hidden files such as .htacess, .bash_history, .ssh etc..
The / in /dest/ makes sure the contents go into it instead of replacing /dest itself (eg. if you did not have the / at the end).........
Stopping httpd: [FAILED]
Starting httpd: httpd: Syntax error on line 73 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared obje........
This is a simple fix but not a simple problem and it still doesn't make sense to me.
But in a nutshell if your target proxy server works fast when accessing directly over SSL then this may be your issue.
It seems SSL does not play nicely when the target proxy destination/host has a riduculously long key (such as 8192 bits long). Now this is normally not a problem, in fact the target server could be accessed with hardly any delay directly despite such a long key.........
Auction 262382440107: Cannot connect to URL : SSL connect error: gnutls_handshake() failed: Illegal parameter
Retrying...
esniper encountered a bug. It looks like your esniper version is not
current. You have version 2.28.0, the newest version is 2.31.0.
Please go to http://esniper.sf.net/ and update your copy of esniper.........
At first my BIOS said the card may not work right because there is no more option ROM space.
I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly.
But it still cannot initialize the card properly(does not work):
[ 33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........
Download from here http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9200-8e#downloads
sudo Installer_P20_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash -listall
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
&nbs........
There are a few ways of doing this and all basically involve using the reverse proxy or "ProxyPass" feature of Apache to accomplish it.
1.) Create a normal vhost and simply symlink the root directory of the site you want to mirror.
Eg. originalsite.com and newsite.com
/vhosts/originalsite.com/httpdocs
You would symlink like this:
ln -s /vhosts/originalsite.com/httpdocs vhosts/originalsite.com/........
To check the version of Ubuntu just use the lsb_release command as shown below and you will be able to see the exact Ubuntu version you have installed.
lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 14.04 LTS
Release: 14.04
Codename: trusty........
I modified the default to the following for faster local dialing for North American area codes:
(*xx|[3469]11|0|00 [2-9]xxxxxxS0|[2-9]xxxxxxxxxS0|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)
This is what I added to the above: "[2-9]xxxxxxxxxS0" so any 9 digit number is dialed instantly xxx-xxx-xxxx (the S0 at the end makes it dial right away). This makes dialing much quicker and is recommended.
*No........
I have two lines on my PAP2T and the only thing that solved this problem rather instantly was to change the line with the problem to using port 5060 instead of 5061 (so both lines are using port 5600). Note that I am not forwarding either port in my router either.
Some of the symptoms of this problem for me were the following:
No dialtone or it would take several tries.
You answer a call but the phone keeps ringing (takes a few times t........
service iptables start
iptables: Applying firewall rules: iptables-restore: line 40 failed
[FAILED]........
The first thing to diagnose is what is actually in the database (use PHPMyAdmin or CLI).
You will of course either find that the backslash is either in the database or not.
If the backslash is in the database you probably have magic quotes gpc/runtime on and/or are calling the "addslashes()" function which does this.
If you are escaping your data with mysql_real_escape_string() then think again, you probably have magic quotes gpc enabled either in php.ini or........
1.) Flash directly to this file:
http://tomato.groov.pl/download/K26RT-N/build5x-132-EN/Linksys%20E-series/tomato-E2500-NVRAM60K-1.28.RT-N5x-MIPSR2-132-Max.zip
*I was never able to get the larger "Mega" file to work, at least not initially so I recommend the file above.
To enable 5ghz I had to do the "Clear NVRAM" Option before it was shown.
2.) Or if you don't need 5ghz (most devices do not support it and cannot........
The problem is that the default of most of these units is set for non-North American phones so the ring sounds like it cuts off and is not sequential.
How To Fix the Issue
Click on "Regional" and make sure you are in Advanced mode.
........
According to this and my own experience it is the case that you have started something running in the foreground or a server that does not terminate with a normal rc.d script. The server will reboot once you kill whatever command or process that is.........
If Linux Mint 17 or other has no window buttons/controls you can do the following from terminal:
marco --replace&
Sometimes it can be fixed if you go to your themes/appearance and choose a new one but in the case like mine where Compiz is installed but not running/working then that fix will not work and will require the marco command above.
What if you can't type in a terminal Window?
If you close........
The Scenario
You have dual NICs and you disable NIC1 which uses 192.168.1.1 as its gateway. With NIC2 you enable it/connect it to another network which also has the gateway 192.168.1.1
Everything will work fine at this point.
When switching back to NIC1 even with NIC2 disabled and even unplugged, the OS basically can't pick up the new/updated ARP entry of the old device for 192.168.1.1 and perhaps thinks it is a security risk or spoof of some sorts and blocks i........
This is a real pain because I had to manually unplug ethernet cables for network testing or to use an alternate network or guarantee physical access to one network segment is cut off.
For some reason this happened after Ikilled dbus because it was confused and blocking packets thinking they were coming from the wrong interface since eth0 and eth1 both had the same subnet and gateway.
I eventually did a "service network-manager restart" but the option was........
Iwill start by saying I think I know what caused this boot-time error on Linux Mint but should also apply to Debian and Ubuntu.
I changed my BIOS time to several hours in the past to match the current time, but this caused Linux to think there were incorrect filesystem times.
The problem is that it seems when you hit this I am not sure what is happening, it doesn't seem to be doing fsck and hangs without prompting the user.
What I have found is that........
The below forces all request to your domain to go to the main non-www root domain.
Updated code:
RewriteCond %{HTTP_HOST} !=domain.com
RewriteRule ^(.*)$ https://newurl.com/subdir/$1 [R=301,L]
If you don't want it to go to a subdirectory:
RewriteCond %{HTTP_HOST} !=domain.com
RewriteRule ^(.*)$ https://newurl.com/$1 [R=301,L]
Bad code:
This code is bad beca........
/var/lib/samba/usershares
But note that it is just simple file sharing if you need directory mask, create mask etc... you still need to edit the smb.conf file to create your share.
Here is an example file:
comment=
usershare_acl=S-1-1-0:R,S-1-22-1-1000:F
guest_ok=y
sharename=BabyPhotos........
apt-get install pptp-linux
echo "yourvpnusername * yourpasspass *" >> /etc/ppp/chap-secrets
vi /etc/ppp/peers/provpnaccounts.com
enter (ignore the lines):
============
pty "pptp server.provpnaccounts.com --nolaunchpppd"
name testuser
#remotename PPTP
require-mppe-128
file /etc/ppp/options.pptp
==========........
The following assumes the computer is local/physical to you and/or it always has a LANIP so it can be accessed on site without having a default gateway.
The key to this is not to set a default gateway for your computer or you can set a script on boot or other time to delete the gateway (where eth0 is the NIC you are using):
route del default eth0
50.80.20.2 is the VPN server you connect to
192.168.1.1 is your........
Debian/Ubuntu vi keyboard problem, up and down arrows do not work and instead make an A (Up), B (Down), C (Right) or D(Left).
The working solution
(you could also add the set nocompatible to /etc/vim/vimrc to make it system wide-will not be applied until reboot I believe):
echo "set nocompatible" > ~/.vimrc
some suggest entering this in vi but it did not work for me:
:set term=cons25
The........
Device Boot Start End Blocks Id System
/dev/sdc1 1 132 1060256+ fd Linux raid autodetect
Partition 1 does not end on cylinder boundary.
Partition 1 does not start........
Add the following to fstab where 192.168.1.125/Media is the samba share and where /home/homeuser/Downloads is where you want to mount.
Change user and pass to what is needed (if no pass is required it still works fine with the below).
//192.168.1.125/Media /home/homeuser/Downloads cifs user=guest,pass=bla 0 0
mount: wrong fs type, bad option, bad superblock on //192.168.1.125/Media,
&nbs........
It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post.
*If you get the icedteaweb window but nothing loads or prompts it is probably your security settings that won't even prompt to run it. See this article to solve that problem.
To fix this error you need to edit the java.security file m........
This was a horrible shock after upgrading fromUbuntu 9 to Linux Mint 17 and I found that the last distro to support tsclient was Debian Squeeze.
For some reason it has disappeared for a long time and the new options such as rdesktop and gnome-rdp do not have any start menu entry and just aren't done as well as tsclient.
Fortunately there is a solution:
tsclient surprisingly can be downloaded as a direct .deb package and it fails with some variou........
grub> root (hd0,0)
root (hd0,0)
Filesystem type is ext2fs, partition type 0xfd
grub> setup (hd0)
setup (hd0)
But if you do:
root (hd1,0)
setup (hd1)
it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical).
Checking if "/boot/grub/........
Say you have a bunch of files like this:
file-01.jpg
file-02.jpg
...............
What if you want to mass rename them?
the rename tool can work just like sed
For Debian based distros:
Note "file" is what we search for and "newname" is what we replace it with, so substitute according to your requirements.
rename s/file/newname/ name-file-*.jpg
For R........
mono/wine not working in Ubuntu/Linux Mint/Debian:
The assembly mscorlib.dll was not found or could not be loaded.
It should have been installed in the `/usr/lib/mono/2.0/mscorlib.dll' directory.
solution:
sudo apt-get install mono-complete
Problems:
mono does not work well for even simple things like a Winrar self extracting .exe fi........
I was asked to troubleshoot why a site wasn't loaded or responding properly, it turned out they were using some old javascript tracker from Bing/Microsoft that is no longer valid or working. You have to wait forever for it to time out but it really did disrupt the functionality of a very important site:
flex.atdmt.com
If you have the above code in javascript on your site remove or comment it out.........
Istanbul:
At least in Linux Mint the latest 17.2 version Istanbul freezes when "In process of saving to Disk" even with the workaround of not having Sound recording enabled. It looks like a great app but bugs like this seem to have plague it for over 8 years!
Kazam:
This little app works great, its only bug is that when you try to tell it to record a window or area it puts a gray cov........
It is just the readlink command with the -f switch and it will display the full path, very handy to save time when you want to copy and paste the location of a file or script etc..
readlink -f updatehtaccess.sh
/var/lib/updatehtaccess.sh
........
I am getting this error:
kernel:[14277.697049] EDAC MC0: UE row 4, channel-a= 0 channel-b= 1 labels "-": (Branch=0 DRAM-Bank=0 RDWR=Read RAS=7048 CAS=0 FATAL Err=0x4 (>Tmid Thermal event with intelligent throttling disabled))
But many people believe this is a bug/false message and the server is running stably.........
In this case we want to mount partition #2
fdisk -lu Centos-6.6-x86_64.img
You must set cylinders.
You can do this from the extra functions menu.
Disk Centos-6.6-x86_64.img: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders, total 0 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot&nbs........
It sounds like this is corrected in later versions of the OpenVZ kernel but Iam not sure, it may also be that a much newer kernel is needed and Centos may not have a recent enough kernel.
*Debain 7.0 however does work fine as a temporary fix or work around.
Debian 8 OpenVZ no IP and networking not working:
lo Link encap:Local Loopback
 ........
for disk in `fdisk -l|grep "Disk /dev"|awk '{print $2}'|sed s/://g`; do
echo "$disk" && smartctl -d ata -a "$disk" -T permissive|grep -iE 'Device Model:|Serial Number:'
echo "---------------"
done
*Make sure you have smartctl from smartmon tools installed
Sample output:
/dev/sdc
Device Model: ........
Say you have a path like this "/some/path/here with spaces/". If you try to transfer it you will get a message along the lines of:
scp -rp 192.168.0.12:"/some/path/here space/" .
scp: /some/path/here: No such file or directory
scp: space: No such file or directory
You can escape each space but what a pain that is especially if you have multiple spaces in the path.
The simplest way is to use the follow........
convert -append file1.jpg file2.jpg output.jpg
The above is all there is to it.
file1.jpg and file2.jpg are the ones to combine (the order is used)and output.jpg is the combined image.........
The package "mdbtools-gmdb" works very well but I was not able to get the forms working that were part of the .mdb but you can at least view all of the rows and Export to CSV........
Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access.
So in this case you add a second physical or disk or already ha........
In my case I could login with the initial install but I rsync'd everything over while preserving ownership and permissions to another RAID partition and booted from that.was fine before. The problem is that you are kicked out the second you login and the problem was SELINUX for some reason (perhaps it noticed something strange when it was moved to the new partition)
login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
login: ROOT LOG........
#solution
Edit /etc/yum.repos.d/openvz.repo
For the first two entries comment out #mirrorlist and uncomment #baseurl and then it worked
openvz yum problem Centos 6.5 cannot find file on mirror:
yum update
Loaded plugins: fastestmirror
Determining fastest mirrors
* openvz-kernel-rhel6: mirrors.ustc.edu.cn
* openvz-utils: mirrors.ustc.edu.cn
base ........
The solution was to reinstall the vbox dkms package and do a manual modprobe of the modules it makes.
I never sorted out the unable to start due to the USB issue, I did have the guest additions installed but the only way to boot was to change the pointing device from USB to PS2 and then to disable the USB controller (if your pointing device is set as USB, disabling USB will not work because it will re-enable by default when it sees your pointing device is USB, this is w........
Iwas surprised to see that Linux Mint at the latest 17.2 version still has NO mdadm installer option, and worse the installer will not be able to create a proper booting environment even when you do install it.
How to setup mdadm in Linux mint LiveCD
sudo su
apt-get install mdadm
# partition as you need and then create your mdadm devices
# create your SWAP md0
mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /d........
Before reading on remember to put the line at the bottom of /etc/sudoers as from experience what happen is that other rules cancel out what you have added.
If your sudoers setup is correct it will work immediately upon saving without requiring a reboot.
Edit /etc/sudoers
yourusername ALL = NOPASSWD: /path/to/command
*Once again remember the above should be on the bottom of the sudoers file or........
First of all this seems to apply to many ONVIF devices
Hard coded IP: 192.168.1.10 (yes not kidding no DHCP!)
00:12:12:9C:C2:00
To view RTSP stream use VLC, or openRTSP or other RTSP capable software:
rtsp://192.168.1.10/user=admin_password=tlJwpbo6_channel=1_stream=0.sdp
user: admin
password: blank
http://ip/Login.htm
Uses Quicktime and is a poor quality picture and slow
Cannot change pass........
freshclam
ERROR: Can't open /var/log/clamav/freshclam.log in append mode (check permissions!).
ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log).
Tue Oct 13 13:49:35 2015 -> WARNING: Incremental update failed, trying to download daily.cvd
Tue Oct 13 13:49:35 2015 -> WARNING: Can't download daily.cvd from db.local.clamav.net
Tue Oct 13 13:49:35 2015 -> Trying again in 5 secs...........
sudo apt-get install zoneminder
[sudo] password for one:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libuser-perl python-evince kdebase-apps kwrite unixodbc
libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp
python-mediaprof........
[ 2868.041375] ata1: EH in SWNCQ mode,QC:qc_active 0x40 sactive 0x40
[ 2868.041554] ata1: SWNCQ:qc_active 0x40 defer_bits 0x0 last_issue_tag 0x6
[ 2868.041556] dhfis 0x40 dmafis 0x40 sdbfis 0x20
[ 2868.041874] ata1: ATA_REG 0x41 ERR_REG 0x84
[ 2868.042013] ata1: tag : dhfis dmafis sdbfis sactive
[ 2868.042163] ata1: tag 0x6: 1 1 0 1
[ 2868.042301] ata1.00: exception Emask 0x1 SAct 0x40 SErr 0x400000 action 0x6 frozen
[........
I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar:
yum -y install python-pip python-devel
No package python-pip available.
#install the EPEL repo
python-pip install obfsproxy
python-pip install obfsproxy
-bash: python-pip: command not found
pip install obfsproxy
&........
yum -y install wget
wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo
rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ
yum -y install vzkernel vzctl
#enable ip_forward
sed -i s/'net.ipv4.ip_forward = 0'/'net.ipv4.ip_forward = 1'/g /etc/sysctl.conf
#all interfaces should not send redirects
echo "net.ipv4.conf.default.send_redirects = 1" >> /etc/sysctl.conf
echo "net.ipv4.co........
mdadm --create /dev/md1 --level 10 --raid-devices=2 /dev/sdb2 /dev/sdc2 --layout=f2 --metadata=0.90
Note that layout=f2 or layout=n2 is very important as without it you'll get a complaint like this:
mdadm --create /dev/md0 --level 10 --raid-devices /dev/sdb1 /dev/sdc1 missing missing
mdadm: invalid number of raid devices: /dev/sdb1
It is basically more like a prop........
vzctl set $CTID --devnodes net/tun:rw --capability net_admin:on --save........
Use netstat with the -anpe option. The e option shows the inodes and I do not know if it will always work or if it was by fluke but I was dealing with dozens of SSHsessions and needed to know which session was related to which forward (the PIDs of the SSHand SSHD did not match etc...)
Notice the "59560675" and "59560762" those are almost identical, if you find two sets that are nearly identical except for the last 3 digits they may match (in my ca........
vi /etc/yum/pluginconf.d/fastestmirror.conf
exclude=.hk,.cn
You could also use specific domains but as you can see above we are blacklisting all Hong Kong and Chinese mirrors in this example.........
1.) My screensaver would take a long time to disable after hitting a key.
2.) Usually errors like below will follow.
3.) Compiz sometimes uses 100% or high CPU
4.) My window controls will disable (eg. the minimize, maximize and close buttons).
It seems like Compiz or appearance/effects disable themselves. Re-enabling Desktop Effects under Appearance temporarily fixes it.
5.) high load in general from things like "Migration" pr........
telnet 192.168.1.54
-------------------------------------
ProCurve J4903A Switch 2824
Software revision I.10.77
Copyright (C) 1991-2009 Hewlett-Packard Co. All Rights Reserved.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject........
rm -- --filename
Ironically if the solution is two leading dashes as shown above but this applies for other stubborn file names.........
ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
........
Fortunately the format is EATX so an EATX case will work and the screw layout is standard.
You will need to remove the HEX/TORX screws that are connecting the stock HP standoffs (meant to slide into an HP case).
XW9400 Motherboard Issues
Size: 12" x 13"
Proprietary Power Connector
Proprietary CPU Power Connector
Proprietary Memory Power Connector
Fan connectors are 4 pin so you will need some kind of adapter.........
Based on this from Debian
The 'distribution' can be either the release code name / alias (wheezy, jessie, stretch, sid) or the release class (........
sed -i 's/[d128-d255]//g' file.txt........
This command rips the audio tracks to .wav files
*I recommend making a new directory with the name of the audio disc first and executing everything from within that directory below.
cdparanoia -B
Use the lame mp3 encoder to encode each one with this script:
*Note that this will encode any other files ending in "cdda.wav"
for track in `ls *cdda.wav`; do lame -b 192 $track; done........
yum -y install dvdauthor ffmpeg mjpegtools sox bc
rpm -ivh dvd-slideshow-0.8.4-2.noarch.rpm
Preparing... ########################################### [100%]
1:dvd-slideshow ########################################### [100%]
/usr/bin/dir2slideshow: line 553: bc: command not f........
This happened while trying to delete several thousand users from phpBB and basically corrupted the innoDB tables.
InnoDB: Page lsn 3 881164362, low 4 bytes of lsn at page end 881164362
InnoDB: Page number (if stored to page already) 86920,
InnoDB: space id (if created with >= MySQL-4.1.1 and stored already) 0
InnoDB: Page may be an index page where index id is 700
InnoDB: (index "tid_post_time" of table "phpBBdb2005"."phpbb3_p........
Error: Cannot retrieve metalink for repository: epel. Please verify its path and try again
You have to upgrade the ca-certs for epel but need to disable it before that can happen.
yum upgrade ca-certificates --disablerepo=epel........
This example is based on Wordpress but applies to any other query string eg.
http://wordpress.com/?p=55
If you want to manually redirect that p=55 to /some/other/url how do you do it?
RewriteCond %{QUERY_STRING} p=55 [NC]
RewriteRule .* /new-url/? [R=301,L]
You can change the p=55 to whatever your query string looks like.
Remember to keep the "?" at the end of the new URLunless you really want the query s........
if [[ "$templatesource" == *windows* ]]; then
partition=/dev/sda2
fi
The * before and after * windows will match this "Ihavelotsofwindowshere"
Of we could have used "windows*" and anything that starts with "windows" will be matched etc...........
windows cannot find the microsoft license terms windows 2012 server install
This is actually because you are using less than 576MB of RAM. In my case I was installing on a KVM VPS with 512MB of RAM. This issue would apply to any physical or virtual server with less than 576MB of RAM. This includes Virtualized VPS Servers with XENHVM, KVM, VBOX, VMWare etc.. or Dedicated Servers with such little RAM.
It's very misleading of course since it has not........
If a service is not working and resetting it to defaults is not working and you get bizarre error messages it is probably a broken update and possibly duplicate package.
Take in this case "exim" not working even after resetting to defaults.
Check for duplicates:
rpm -aq|grep exim
........
This is useful if you are installing Windows and need virtio but of course Windows needs the virtio driver which is on a second iso.
This is the line of code you would add to your kvm startup script and then you get this iso as second cdrom you can browse to for your Windows install of virtio driver's or whatever other use you need it for.
-drive file=/kvmtemplates/virtio-win-0.1-94.iso,media=cdrom........
0000:00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)
0000:00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1)
0000:00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1)
0000:00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1)
0000:00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4........
I'm not sure why I'm getting these but all memory modules are the exact same and all passed memtest successfully although they are ECC. I've heard that ECC RAM can't be tested as well and the kernel seems to indicate they are non-fatl recoverable errors. I wonder if the BIOS has aggressive RAM timing or maybe the controller or motherboard is bad.
[ 12.716515] EDAC MC: Ver: 2.1.0
[ 12.717771] EDAC MC0: Giving out device to........
[ 17.208336] tg3 0000:08:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 17.210194] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX
[ 76.000065] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 76.002332] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 86.736004] eth0: no IPv6 routers present
[ 148.960038] phy0 -> rt2x00lib_request_fi........
What does VPN stand for?
VPN stands for Virtual Private Network and is a secure way of connecting networks and devices.
In the context we're talking about it will usually be a client-server solution and not connecting whole networks or businesses.
The assumption is that most people reading this are trying to secure their internet connection, privacy and hide or change their IPaddress.
Why use a VPN?
There are many........
Thsi is very handy when doing your own kernel development.
-m specifies how much ram (in the example it is 768MB)
-kernel specifies the path to the kernel file
-net tap,ifname=tap1,script=no (the ifname=tap1 is what you need to change and setup manually).
*Run "tunctl -b" to create a tap device and use the one it gives you for ifname=
Enable networking to the outside like this:
*Note we assume that your bridge is br0 i........
I messed up the bootloader by accident on a standard Centos 6.3 install because I turned the /dev/vda1 boot partition into an mdadm raid 1. This was all done correctly aside from one point Ididn't realize was an issue metadata=00.90 is the only thing that will allow you to boot (otherwise grub won't work and you won't boot).
So the next step is rescue mode from a CD right? The problem you will find is that grub does not detect your hard drives, this is Ibelieve is be........
The command below will show only files created for the month of 2014-12 but you can of course change the year, month or even specific day or time to suit your needs. The awk command simply just makes it output the list of files created on the date you are looking for.
stat -c "%z %n" *|grep ^"2014-12"|awk '{print $4}'........
Are you getting the same old error message even though your iptables settings for OpenVZ are correct?
iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
The reason is because in newer vzctl the old way of setting IPTABLES="" in vz.conf is completely deprecated (I spent some time fiddling wondering why my settings were correct but........
if you type Export and see something like this:
declare -x all_proxy="socks://127.0.0.1:22000/"
Most sites assume and tell you to check your .bashrc or /etc/profile /etc/bash.bashrc which may not apply if you've unknowingly or forgot that you setup a proxy from your GUI such as Gnome.
To check in Gnome if you have a permanent proxy do the following:
System -> Settings -> Network Proxy........
Use the program exiftags
exiftags 20141031_155127.jpg-45460829d582e9.jpg
exiftags: couldn't find Exif data........
This is basically caused by upgrading PHPto a new version like 5.4 when you had 5.2 before and an old version of Joomla. The only solution is to upgrade Joomla or downgrade PHP, both of which can be a pain.
Strict Standards: Non-static method JLoader::import() should not be called statically in /home/userdir/public_html/libraries/joomla/import.php on line 29
Strict Standards: Non-static method JLoader::register() should not be ca........
It is a permissions issue that is hard to fix.
All but one USB device is greyed out.
I am already a member of "vboxusers"
I have already enabled and disabled USB support for the guest.
I have already reinstalled the latest VBOx guest editions
If running as root it all works fine
Changing........
libguestfs tools howto guide for managing virtual machine images
To mount a partition
#mount the kvmuser102821.img image and the /dev/sda1 partition from it to the local directory "mount"
guestmount -a kvmuser102821.img -m /dev/sda1 mount
To list partition info on the image:
virt-df image.img
Filesystem........
The solution is to run '/etc/init.d/vboxdrv setup' and sometimes happens when upgrading VBox and the kernel modules don't get upgraded with it. Sometimes the above doesn't work until you reboot because sometimes other unknown processes (even the file manager possibly) may be locking the old module from being unloaded.
Failed to open a session for the virtual machine XP.
The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.........
cc: Internal error: Killed (program cc1)
Please submit a full bug report.
See for instructions.
make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1
make: *** Waiting for unfinished jobs....
Stopping crond: ........
You need to use the Samsung driver but specify it as a CLP-360 (this is what I used for my CLP365) and incidentally most of these units look identical on the outside on inside (I've been buying whatever the latest C300 and now 400 unit for years which all seem the same with slightly different features that I never use).
The solution
Once again try specifying earlier models and revisions if the printer doesn't print (it will say it's been sent to the printer bu........
i337 Canada on Bell is hard to root or even install TWRP
Installed TWRP from Odin and my computer gave me the bluescreen at the end but it seemed to be successful (after ODIN said reset).
TWRP mode does not seem to enter, instead you get the Android recovery mode with Volume up + Home
http://galaxys4root.com/galaxy-s4-root/how-to-root-att-or-verizon-galaxy-s4-on-android-4-4-2/
1.)........
First of all if you're getting this error it is a result of extreme database activity. If you aren't expecting it or it doesn't make sense to you 99% of the time this is a database driven script being exploited (some common examples I see often are things like phpBB being hit by dozens, hundreds or thousands of bots making constant DB write requests).
The easiest way to identify this is to restart MySQL and then run the third party tool "mtop" and you'll see all........
iptables -t nat -A PREROUTING -p tcp -m tcp -d 192.168.2.1/32 --dport 3389 -j DNAT --to-destination 192.168.5.2:3389
iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
The above is often because you don't have the correct modules loaded on the hostnode or enabled for the container but in some cases it's actually a weird openvz setting.
Che........
The most common solution is to use the /etc/postfix/header_checks but this is a big problem.
Why is header_checks a problem? Because it does it to all mail whether incoming or outgoing and whether authenticated or not. We of course want as much header information for incoming as we can get for many reasons but many organizations want to secure and make their mail clients as secure as possible.
I adapted this solution to the client's custom config, they are configur........
It really seems that 4.4.4 is not ready or stable for the i717 yet and this makes sense since it takes a lot of work/development and testing to get the factory stock ROMs working well. In the end I used the 4.1.2 based Blackstra BlackJelly because it was fast, stable and just works and feels great. The aftermarket support is great but many devs are focussed on adding features and customization that most of us don't want or need rather than getting things smooth and stable.........
Unable to mount iPad 4
Unhandled Lockdown error (-4)
This is because you need the libimobiledevice-utils package installed and a newer version of it.
My older Ubuntu 10.10 uses a version that does not have "idevicepair" which seems to work perfectly and automatically with newer versions of the library.
Basically if you install the above library it should be plug and play and if your imobiledevice-utils doesn't have 'idevice........
There is a weird quirk with how this works, but there is a variable called "src" that defaults to 0 or disabled if not specified as 1.
The default 0 means not to recur billing on a subscription. It's too bad it's not more obvious anywhere nor is there an explanation or warning during payment or after to both the seller and buyer.
Here's a proper subscription code example that does recur and does not cancel........
It was hard to find this as I find most online payment processors don't just put the basic information in plain view.
Remember to set your sid (your seller id). The below can easily be turned into a scripted PHP template to integrate into your own custom or existing payment solution.
http://help.2checkout.com/articles/How_to/How-to-Sell-Recurring-Products-with-2Checkout/........
This error seems to happen randomly and especially when trying to send e-mails. Apparently it's a long-standing GNome bug but is also partially the default of Thunderbird depending on who you ask. There is no known fix that I'm aware of except to upgrade gnome and the gvfs package but this is not an option for older versions/distributions.
An error occurred while loading or saving configuration information for thunderbird. Some of your configuration settings may not........
CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting. I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts.
So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........
Say if you have a form/button like this:
........
Dial ****
Then 110#
It will then say what your current IP address is.........
I've only ever seen this in Ubuntu for some reason and it is because of the /etc/nsswitch.conf settings.
So the issue is that if the hostname's reverse DNS cannot be found that you need to go back to DNS which was not the default in this nsswitch.conf file for some strange reason.
Edit /etc/nsswitch.conf and replace your "hosts" line with this:
#hosts: files dns mdns4_minimal [NOTFOUND=return] mdns........
Error: Unable to restore run data (10)
Error: Unable to restore run data (11)
Ikeep getting this error but so far there is no obvious solution. Sometimes I've had to remove the *.hist files so I'll try that again.
*Update
This is an ongoing random problem after months of running webalizer it runs into some problem that can only be fixed by removing the following files so it can rebuild the stats (you end up losing p........
This can be very tricky, say you are doing development on a file that is symlinked. Doing a "cp dev.file dev.file-bk" won't do what you expect, it just links back to the same file so you haven't copied or backed anything up.
You need the "-H" switch to copy the actual file that is referenced by the symlink:
cp -Hdev.file dev.file-bk........
drbd 8.3 hard drive failure recovery
drbdadm attach r0
DRBD module version: 8.3.10
userland version: 8.3.8
you should upgrade your drbd tools!
0: Failure: (119) No valid meta-data signature found.
==> Use 'drbdadm create-md res' to initialize meta-data area. ........
mytop-1.4-2.el5.rf.noarch from rpmforge has depsolving problems
--> Missing Dependency: perl(DBI) is needed by package mytop-1.4-2.el5.rf.noarch (rpmforge)
solution:
#disabling excludes is required on CPanel type boxes which exclude most updates including perl-DBI
yum --disableexcludes=main install perl-DBI
mytop-1.4-2.el5.rf.noarch from rpmforge has depsolving problems
--> Missing Dependency:........
http://sourceforge.net/projects/apacheoo-deb/files/debian/dists/wheezy/main/binary-i386/
To install AOO on your computer, you need to add the following entry to the /etc/apt/sources.list file:
deb http://downloads.sourceforge.net/project/apacheoo-deb/debian wheezy main
sudo apt-get update && sudo apt-get install openoffice-en* openoffice-brand-writer openoffice-brand-calc openoffice-brand-impress openoffice-brand-base open........
This is what fixed it:
[root@box13 ~]# dd if=/dev/zero of=/dev/md160 bs=512 count=500
Basically you need to wipe out more than just the 512 byte partition table so 512 bytes * 500 is more than enough to make DRBD happy and think the partition is now empty.
The reason this happens is because it gets confused when there is a previous partition with data on the device you are using.
root@box13 ~]# d........
I used the matching 8.3.13 utilities and it didn't work but strangely the newer 8.3.16 which makes DRBD complain works just fine.
GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51
0: cs:SyncSource ro:Secondary/Primary ds:UpToDate/Inconsistent A r-----
ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5236960
&am........
Can't load ploop library: libploop.so: cannot open shared object file: No such file or directory
The above happens when you haven't installed the ploop tools:
yum -y install ploop........
(echo n; echo p; echo 1; echo 1; echo; echo wq) | fdisk /dev/sdb
The above would make a new partition 1 on /dev/sdb and save the changes to disk, you can of course make changes to do almost anything in fdisk.........
c1: warnings being treated as errors
stonith_signal.h:34: error: 'stonith_signal_set_simple_handler' defined but not used
gmake[3]: *** [apcmaster.lo] Error 1
gmake[3]: Leaving directory `/root/rpmbuild/BUILD/heartbeat-1.2.4/lib/plugins/stonith'
gmake[2]: *** [all-recursive] Error 1
gmake[2]: Leaving directory `/root/rpmbuild/BUILD/heartbeat-1.2.4/lib/plugins'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/root/rpmbuild/BUI........
It's always bothered me how Wordpress basically forces the user to provide their hosting credentials to install themes and plugins. How do know for sure the data is not being saved, intercepted and being provided backdoor access to the NSA or other agencies or even just being misused by others with access?
Here's how to close the security hole above and if you're already given Wordpress your credentials make sure you change everything associated it with it. Eg. change your........
#count=10000 makes an image of 10000MB make sure your image is at least the same as your existing
dd if=/dev/zero of=yourimage.img bs=1M count=10000
# losetup -fv newimage.raw
# fdisk -cu /dev/loop0
# kpartx -a /dev/loop0
# dd if= of=/dev/mapper/loop0p1
# e2fsck -f /dev/mapper/loop0p1
# resize2fs /dev/mapper/loop0p1
# a lot of guides tell you to edit /etc/fst........
On primary node
drbdadm connect all
On secondary node
drbdadm -- --discard-my-data connect all
........
Start -> Administrative Tools ->Server Manager
Under "Computer Information" click "Configure Remote Desktop".
Under "System Properties" choose the type of "Allow connections" you want.
That's all there is to enabling RDP Access in 2008 server.........
"Detecting hardware, please wait..."
Solution
This occurs if you are installing with low RAM such as 128MB
Bump it up at least to 512MB for the install........
This problem seemed to happen recently but was likely causing issues before where the phone(s) do not ring.
Now there are a few reasons why this can happen especially if your adapter has DND mode enabled (disable it).
However that wasn't my issue and Ionly figured it out the other day when by fluke if you're on the phone (making a call) then calls will come in.
That's when Ifigured out the solution:
This likely app........
./configure
./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory
Error: kernel version not found.
Please make sure your kernel is configured.
dr-xr-xr-x. 4 root root 4096 Feb 21 06:13 ..
lrwxrwxrwx 1 root root 45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25
drwxr-xr-x 2 root root 4096 Feb 12 20........
This can happen when you install RPMForge or other repos with the wrong architecture and here's how you fix it (simply uninstalling won't usually fix it):
solution
yum clean all
yum -y install openvpn
Loaded plugins: fastestmirror, presto
Loading mirror speeds from cached hostfile
* base: mirror.its.sfu.ca
* extras: centos.mirror.nexicom.net
* rpmforge: mirror.cpsc.ucalgary.ca
* up........
Iused the slightly older "304.117" version and it worked.
With the newest version Icouldn't get X to start and kept getting these errors in messages/dmesg.
[ 2346.083660] nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
[ 2350.608342] NVRM: RmInitAdapter failed! (0x12:0x2b:1831)
[ 2350.608354] NVRM: rm_init_adapter failed for device bearing minor number 0
[ 2350.608369] NVRM: nvidia_frontend_open: minor 0, module->open() failed, err........
nf_conntrack: table full, dropping packet
The above in some cases I've seen is a sign of a DOS attack or can occur if users are using services like torrenting, proxy, VPNetc... Do not take it lightly as the above can knock a server offline if the table becomes full and I've also seen full crashes and kernel panics shortly after.
........
Error: Package: php-Monolog-dynamo-1.7.0-1.el6.noarch (epel)
Requires: php-aws-sdk
Error: php-pecl-zendopcache conflicts with 1:php-eaccelerator-0.9.6.1-1.el6.x86_64
Error: php-xcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64
Error: php-pecl-zendopcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64
Error: Package: php-horde-Horde-Vfs-2.1.2-2.el6.noarch (epel)
&n........
root@hkhosting [/]# service httpd start
Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf:
Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration
........
I never found a solution to do it live (nothing worked that I found) so it looks like a relogin is required.
Check your maximum file limit
cat /proc/sys/fs/file-max
824460
This is different than your actual's user limit which you'll see below
ulimit -n
1024
Try and set it higher but it won't work
ulimit -n 65000........
It's not as simple as "yum install" as you can see below and it doesn't stop there.
yum install php53
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: mirror.us.leaseweb.net
* extras: centos.mirror.rafal.ca
* updates: centos.mirror.nexicom.net
* base: centos.mirror.nexicom.net
* addons: centos.mirror.nexicom.net
Setting up Install Process........
I was worried the server was hacked, I was logged in already as root but couldn't login to CPanel or a new SSHsession. I even reset the password from the shell and it did not work still.
The reason is CPanel Hulk, it detected a brute-force attack so it locked down the root account entirely even from the correct password. According to cPanel the best way around this is to whitelist your IP.........
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (720x1280 fourcc=34504d46 [FMP4])
[mpeg4 @ 0x2c91c00] timebase not supported by mpeg 4 standard
Could not open codec.
FATAL: Cannot initialize video driver.
That is the error I would get, I thought it was a codec error something else. By fluke Isaw something about ffmpeg where someone recommended manually telling it to the "fps" and it worked.........
[3805108.257042] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[3805108.257052] sd 0:0:0:0: [sda] Write Protect is off
[3805108.257054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[3805108.257066] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[3805108.257083] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[3805108.257090] sd 0:0:0:0: [sda] Write Protect is off........
I was having an issue with only certain random/jpeg files with the functions imagecreatefromjpeg imagecreatetruecolor and other related ones.
This issue was annoying basically it seems like a libgd issue/bug with newer versions of PHP and it was difficult to trace-out. One very useful thing that helped me was using "php-cgi" and passing the query string as an argument eg:
php-cgi images.php source=IMG.jpg (that way you get all the error messages wh........
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Not tained: 3.2.51-3.el6.x86_64 #1
Call Trace:
panic+0x8c/0x1a2
forget_original_parent+0x34d/0x360
exit_notify+0x12/0x140
do_exit+0x1d8/0x400
do_group_exit_+0x50/0xc0
sys_exit_group+0x12/0x20
system_call_fastpath+0x16/0x1b
panic occurred, switching back to text console........
wget http://download-location
sudo tar xjvf thunderbird-24.2.0.tar.bz2 -C /opt
ln -s /opt/thunderbird/thunderbird /usr/bin/thunderbird
[sudo] password for one:
ln: creating symbolic link `/usr/bin/thunderbird': File exists
sudo rm /usr/bin/thunderbird
ln -s /opt/thunderbird/thunderbird /usr/bin/thunderbird
The above is how Idid it, if you don't do it properly you'll find that you are still using the old version (........
wget http://download-location
mv /usr/bin/firefox /usr/bin/firefox-old
sudo tar xjvf firefox-26.0.tar.bz2 -C /opt
ln -s /opt/firefox/firefox /usr/bin/firefox
The above is how Idid it, if you don't do it properly you'll find that you are still using the old version (so verify in About that it is the new version). I've verified the above method works perfectly, it's great if you're using an older version of Linux and need to update the most........
Services -> Services
"Static Leases"
Fill out an empty line:
MAC Address
Host Name
IP Address
Those first 3 fields are mandatory, if you miss it then the changes will be lost even if you try to save.
Make sure you've d........
This server has been running for weeks without issue, it's currently only using 1 of 2 CPUs as it is running in the office as a test bed (mainly due to the handle 12 bay storage/great for testing HDDs). The errors below seem to mainly be from AMD CPUs, it's only happened a single time and in the days since Igot that error it hasn't occurrred.
Interestingly enough /proc/cpuinfo still shows all 4 cores of the CPU (Opteron 2373 Quadcore HE) and the functionality doesn't seem........
Failed to load VMMR0.r0 (VERR_SUPLIB_OWNER_NOT_ROOT)
In most cases the error above is useful, it generally means /usr or /usb/lib or /usr/lib/virtualbox is not owned by root and this is the cause of the error.
Solution
sudo chown root.root /usr/lib........
Go to:
"Server Configuration" -> Basic cPanel & WHM Setup
Scroll to: "Nameservers" (at the bottom)
From there you can set the names of the nameserver and their IPs.
It's very weird and confusing that nothing under IP Functions/DNS has or links to this.........
Fatal error: Out of memory (allocated 6291456) (tried to allocate 7680 bytes)
This is usually caused by Wordpress, Drupal or other ridiculously inefficient CMS' out there, as a temporary fix you can increase PHP's memory limit but it's best to find the actual culprit, by disabling add-ons and other scripts etc...........
Download the latest from Adobe's site and unzip it, enter the directory it creates and type the following:
sudo cp libflashlayer.so /usr/lib/adobe-flashplugin/
sudo cp -r usr/* /usr........
yum -y install fail2ban
vi /etc/fail2ban/jail.conf
[asterisk-tcp]
enabled = true
filter = asterisk
action = iptables-multiport[name=asterisk-tcp, port="5060,5061", protocol=tcp]
sendmail-whois[name=Asterisk, dest=you@example.com, sender=fail2ban@example.com]
logpath = /var/log/asterisk/messages
maxret........
This is different than Centos 5, you have two services btu they are called "smb" and "nmb".
You need to enable and start "nmb" in order for your samba server to be listed.
chkconfig nmb on; chkconfig smb on
service nmb start;service smb start........
Trying to load: pxelinux.cfg/default
boot: _ (why does the cursor flash so long before entering the PXE Boot menu?)........
All Errors (CPanel does not report by domain, but puts everything in a single log which Ithink is a bit silly and annoying):
/usr/local/apache/logs/error_log
Access_Logs
They are found within the home directory of the site user eg.:
/home/admin/access-logs/yoursite.com
MySQL Logs
/var/lib/mysql/yourhostname.err........
Dell CS24-NV7
Unusually the Virtualization was enabled when I got this server but all the NICs were diabled in the BIOS including PXE boot!
Advanced -> Advanced Chipset Control
PCI Slot 1 Option ROM: Enabled
Onboard LAN1 Control: Enabled
LAN1 Option ROM Scan: Enabled (you need it for PXE boot)
Onboard LAN2 Control: Enabled
LAN2 Option ROM Scan: Enabled
*you will need to reboot and........
When manually running it for some reason it decided to ask for/use the CD as a source whichInever set.
Disabling the CD as a source stops this from happening, otherwise apt-get will keep respawning and use 100% CPU.........
somestring="309sfjlks39889d"
removelast="${somestring%?}........
This happened after a customer migrated their hosting and the issue was being unable to access PHP sessions.
Warning: session_start(): open(/var/lib/php/session/sess_3e0oms763m6mrqekdnnmodlhs3, O_RDWR) failed: Permission denied (13) in /register.php(202) : eval()'d code on line 1
Solution:(use the correct ownership/permissions)
chown apache.apache -R /var/lib/php........
shuf -n 1 /path/to/your/file.txt
The above will give you a random line from the file using the "shuf" command.........
Example:
basename /var/log/messages
messages
As shown above the "basename" utility gives you the end filename separately.
dirname /var/log/messages
/var/log
As shown above the "dirname" utlity gives you just the utility even if you pass it a specific file.
The above two utilities are very helpful in Bash scripting when working with files and directories co........
cat Xorginfo.txt|grep -nr "xserver-xorg"
Result:
9: sudo apt-get remove --purge xserver-xorg
13: sudo apt-get install xserver-xorg
17: sudo dpkg-reconfigure xserver-xorg........
sedcommand="$line"s
sed -i $sedcommand/.*/"$newline"/ $location
The variable "line"should be the actual line number you want to replace. The above format is necessary otherwise (to break the "$line"s into it's own variable for it to work.........
./configure
./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc
yum -y install gcc make
./configure
./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc
yum -y install compat-gcc-*
./configure
Error: Could not find alsa
Make sure to have the alsa libs and headers installed.
yum -y install alsa-lib-devel
./configure........
Get the new version here that actually works:
https://github.com/haad/proxychains........
sudo mount -o user /dev/sr0 cd
You need the "user"option otherwise non-root or non-owners cannot view the CD and this would make it so no anonymous access to the CD/DVD mount would work. Note that most distributions including Ubuntu DONOT work unless you manually mount and share as shown above (Icouldn't find any other way in Ubuntu).........
This happens because of a permissions or ownership issue.
Generally /var/lib/mysql should be all owned by mysql.mysql (check that).
To fix it use chown -R mysql.mysql /var/lib/mysql
Also make sure the files are at least readable and writable by mysql (eg. 700).........
Here is a handy script that will check all processes and report what is swapping
#!/bin/bash
for pid in `ps x|awk '{print $1}'`; do
result=`cat /proc/$pid/status|grep VmSwap|awk '{print $2}'|grep -v ^"0"`
if [ ! -z "$result" ]; then
programresult=`ps x|grep $pid|grep -v grep`
if [ $? == 0 ]; then
program=`echo $programresult|awk '{print $5}'|grep -v ^grep`........
mount -o bind /proc /sda2/proc
mount -o bind /dev/ /sda2/dev
mount -o bind /sys /sda2/sys
chroot /sda2
mint / # mount -o bind /proc /sda2/proc
mint / # mount -o bind /dev/ /sda2/dev
mint / # mount -o bind /sys /sda2/sys
mint / # chroot /sda2
mint / # cd ~
mint ~ # ls
Desktop
mint ~ # cd /
mint / # ls
bin Desktop dev-temp home&nb........
Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux
even setting privvmpages to a specific setting DOES not affect "free -m" in containers.
This is probably a kernel issue
23:36:29 up 159 days, 7:12, 4 users, load average: 0.42, 0.44, 0.33
[root@box13 ~]# free -m
total&n........
GIMP
File - Save As
Microsoft Windows Icon (*.ico)........
Sipura / Linksys PAP/VOIP/SIP Adapter Issue
Can't receiving incoming phone calls and you're behind a NAT router (99% of people)?
1. Login to the adapter.
2. Click on "Advanced" (location varies but usually somewhere on top)
2. Click on "SIP"
3. Scroll down to "NAT" (usually at the bottom).
You'll find 2 columns with 4 rows of drop-down boxes (they'........
This was caused by some weird dmraid setup which kind of takes control of drives even if they're blank/unused.
1. Check the table.
dmsetup table
ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172: 0 3905945600 linear 8:0 0
ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172p3: 0 37124096 linear 253:0 284547072
ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172p2: 0 283496448 linear 253:0 1050624
ddf1_44656c6c2020202010........
Add this to htaccess:
Options +Indexes
After that people will be able to browse files and directories of your site.........
Starting container...
vzquota : (error) Quota on syscall for id 42131: No such file or directory
vzquota on failed [3]
Solution
cd /var/vzquota
mv quota.42131 quota.42131-disable
vzctl start 42131
Starting container...
Initializing quota ...
Container is mounted
Adding IP address(es):
Setting CPU units: 1000
Container start in progress...
........
Sep 26 16:56:21 box kernel: 00 00 00 00 00 00 00 00
Sep 26 16:56:21 box kernel: [37007.155690] d_alias libdl-2.12.so d_count=9 d_flags=8
Sep 26 16:56:21 box kernel: [37007.155697] 09 00 00 00 08 00 00 00 9f 05 9f 05 00 00 00 00 c0 71 1d 18 04 88 ff ff 00 00 00 00 00 00 00 00 a0 7e 48 00 00 c9 ff ff 78 a9 21 18 04 88 ff ff 3a 7b fa 4e 0d 00 00 00 98 5c 2d 18 04 88 ff ff 18 5c 2d 18 04 88 ff ff 18 5c 2d 18 04 88 ff ff 00 01 10 00 00 00 ad de 00 02 20 00 00 00 ad de f8........
The units in echo are kB as in kilobyte.
Setting a high sync speed
echo 120000 >/proc/sys/dev/raid/speed_limit_min
This will increase the speed, note that sometimes a rebuild is slow due to current disk activity/iowait.
If that is not the cause then you may have a hardware issue (controller, cable or a bad drive).
Setting a lower sync speed
echo 1200 >/proc/sys/dev/raid/speed_limit_max........
service mysqld start
MySQL Daemon failed to start.
Starting mysqld: [FAILED]
mysqld_safe
cat /var/lib/mysql/server.err
130917 17:57:09 InnoDB: Started; log sequence number 0 0
13091........
PHP5 Centos 6 displays part of code from PHP file for some scripts
Solution
edit /etc/php.ini change short_open_tag = Off to:
short_open_tag = On
Then restart Apache and it should be resolved (assuming the scripts failing used )
........
This example involves an Aterisk message log of about 26GB, but with any server it usually does not get deleted until the server is stopped/restarted:
asterisk 13729 root 6w REG 0,41 27277943090 59097971 (deleted) /var/log/asterisk/messages
So if you've deleted a bunch of large logs, make sure you restart the server for them to regain your space.
........
/scripts/phpextensionmgr install PHPSuHosin
Updating md5sum list
Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)...
Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........
This is usually solved by two variables alone:
max_input_vars=5000
memory_limit=256M
Now you should be able to have unlimited amounts of custom menus in Wordpress.........
Browse to this directory: ~/.config/libreoffice/3/user/backup/........
convert check.png -resize 25%x25%! check-resize.png
You can use a percentage or pixel sizes.........
The first is a dual CPU AMD Opteron 2373EE (4 cores x 2) and I think it did bad because it has some old 250GB SATAs which can only do about 65MB/s max sequential reads. I think it should have blown away the second (AMD X4 640 Quad Core).
[root@fs12home unixbench-4.1.0-wht-2]# ./Run
make all
make[1]: Entering directory `/root/unixbench-4.1.0-wht-2'
Checking distribution of files
./pgms exists
./src exists........
htpasswd -b -c filename username "password"
-b = take the password that we specify in the command (don't prompt for it)
-c = create the filename
username=username
password=password (I use quotes because it breaks if you use special characters)........
relay=alt4.gmail-smtp-in.l.google.com. [74.125.136.26], dsn=4.0.0, stat=Deferred: 421-4.7.0 [ 10] Our system has detected an unusual rate of
This is strange because the mail server IP is not blacklisted anywhere and the IP itself has not been used for years and this server is clean and has only sent a few e-mails to gmail.com in its entire time.
I wonder if this is a legacy block on a whole range of IPs as punishment for others in the block........
I just realized I have some blank users which I deleted butI can still login to this dummy account without a password for some reason.
mysql -u -p
Welcome to the MySQL monitor. Commands end with ; or g.
Your MySQL connection id is 5
Server version: 5.1.69 Source distribution
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation an........
I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards.
My particular model came with the following:
2U Rack Mount Server with Rails
2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times)
16GB RAM
2 x 250GB Seagate SATA
2 x Dell Perc 6/i (horrible and a nightmare to work........
The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results.
This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane.
Adapter #0
Enclosure Device ID: 32
Slot Number: 0
Enclosure position: N/A
De........
One thing to remember is that you need MegaCli to do the flashing.
You also need the correct file,I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli(they were really the wrong version). I have an external PCI-E Dell 6 Perc/I butI chose images from the 'Integrated" on motherboard version as it was allI could find. They are different, and below is my first time finding success.........
I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally.
I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli
wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN
--2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN
Resolvi........
LSi Megaraid
At first it was configured as a RAID 0, then I deleted the Virtual Disk Group.
I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing.
To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........
pxe-32 tftp open timeout
The solution was to enable tftp in xinetd with "chkconfig tftp on".
See the troubleshooting below:
chkconfig --list
NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off
acpid 0:off&n........
cp -L index.php index.php-2013-08-21
The -L switch is what you need because it's a huge issue if you think you've copied a file for backup purposes but it really just creates a symlink to the original file.........
http://support.godaddy.com/help/article/668/registering-your-own-nameservershosts?pc_split_value=1
Log in to your GoDaddy Account.
Click on "My Account" at the top left.
Click on "Domains".
Click on the "Launch" button for the domain you want to create the nameservers for.
Find........
The Cause
Basically it's usually because your Cpanel has new IPs and the old IPs it knows are no longer available/working/valid.
The solution is to change the site's IP but you may run into issues for various reasons. Here is what I encountered below.
It redirects there even though public_html is empty and doesn't have any index or htaccess redirect.
---
This issue happened after a CPanel migration, the site is bein........
Bash weird variable whitespace missing
var=`cat tlds.csv|grep .ca,`
# echo "var=:$var:"
:ar=:.ca,Canada
Why is the v missing in the last line?
It should be
:var=:.ca,Canada
instead of
:ar=:.ca,Canada
I noticed a problem with the file with doing a "cat -v" on it.
Here's the issue, the file contains carat M ^M:
.vg,British Virgin Island........
iptables -t nat -A PREROUTING -p udp -m multiport --dports 20,123,443 -j REDIRECT --to-port 53
getsockopt failed strangely: Invalid argument........
yum update error
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py", line 229, in user_main
errcode = main(args)
File "/usr/share/yum-cli/yummain.py", line 145, in main
(result, resultmsgs) = base.buildTransaction()
&nbs........
The solution is strange but simple and works each time on Centos:
yum downgrade libtorrent........
This is basically URL decoding to the decimal code but nothing in PHPworks how you'd expect it.
Here are online tools to verify and check your work, it's important when querying databases with non-English characters:
http://yehg.net/encoding/index.php#
http://meyerweb.com/eric/tools/dencoder/
http://www.codetable.net/decimal/65398
Japanese:
http://symbolcodes.tlt.psu.edu/bylanguage/japanesechartkatakana.html
Charat code for PHP:........
for ip in `cat fixlist.txt`; do
sudo -u apache ssh root@$ip "`cat iptablesrules.sh`"
done
In the above example we are going to execute the commands within the local file "iptablesrules.sh" on all the machines in "fixlist.txt". This is a great way of performing server maintenance in a clustered or cloud environment.........
open /dev/kvm: No such file or directory
failed to initialize KVM: Operation not permitted
[ 96.084502] kvm: disabled by bios
Any of the above means that "Virtualization" is not enabled in your BIOS. Most servers and Desktops (non-mainstream) can do this no problem but leave it off by default. Note that some systems even though the CPU supports it, don't allow enabling of Virtualization for some reason (especially some lap........
This happens all the time, you are reading from a textfile which has spaces eg:
datainfo 00
datainfo 11
If you do loop on it like this:
for info in `cat $file`; do
echo "info=$info"
done
It will treat datainfo and 00 as two separate lines:
info=datainfo
info=00
Obviously that's not what we want and there are many weird solutions in bash bu........
The key here is to use the "uuencode" command but note that we specify the file name twice (this must be done at least on Centos or it won\'t work).
The first file.zip is the actual file we want to send.
The second file.zip i........
package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture
Linux etc 2.6.18-274.7.1.el5xen #1 SMP Thu Oct 20 17:06:34 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
As you can see above architecture and kernel is 64-bit but I had to force it to install using "--ignorearch"
Solution
#rpm --ignorearch -ivh kernel-xen-2.6.18-274.7.1.el5.x86_64.rpm
Preparing...&nb........
The error itself "mkdir(): Too Many Links" is not very useful, but I'll translate it into plain English.
It means you've reached the filesystem's limit of how many directories can be created in a single directory.
In this case for ext3 the limit is 32000 and it was exceeded.
What's the solution?
The simple solution is to move those directories into more subdirectories possibly sorting them by date, alphabet or numerically.........
Use imagemagick:
convert -density 200 file.pdf file.jpg
Increase the "density" value to get a higher resolution/larger file an decrease it to go smaller.
This is really the quickest and simplest way.........
dialplan reload
It's really that simple, though some say "extensions reload" but it doesn't work for me, perhaps it depends on the version of Asterisk.........
$newlist=str_replace("_"," ",$list);
The example above searches the "$list" string and replaces any "_" with a blank space "".
........
This is a great way to test and experiment without risking your current table, or to make a backup of your current table to avoid corruption or dataloss due to malicious activity eg. deletion etc..
There are two steps and two commands
1.)Copy Table Structure
"cars_backup" is the new table and it will be a copy of the table called "cars"........
SELECT column_name
FROM information_schema.columns
W........
Another new drive bad from the start:
Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error
Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC }
Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........
Container is currently mounted (umount first)
The container is stuck in the "mounted" state, you must manually start it to get it out of that state (there is no umount option as implied by OpenVZ vzctl).........
Have you ever unplugged the wrong drive and then had to rebuild the entire array? It may not be a big deal in some ways but it does make your system vulnerable until the rebuild is done.
Many distros often enable the "bitmap" feature and this basically keeps track of what parts need to be resynced in the case of a temporary removal of a drive from the array, this way it only needs to sync what has changed.
To enable bitmap to speed up rebuilds and sync........
ffmpeg -vcodec copy -i 20130526_195809.mp4 -an 20130526_195809-noaudio.mp4
Withotu the -vcodec copy I got this error (so make sure you use the vcodec copy switch): Error while opening encoder for output stream #0.0 - maybe incorrect parameters such as bit_rate, rate, width or height
........
find / -name 'thedirectorytofind' -type d
That's all there is to it and now you don't have to get a listing of all the files along with it.
Another cleaner solution that supports wildcards is the following
find prep-*/dvd-slideshow_temp*/ -type d
........
This happened to a customer Asterisk server and it somehow found the ID of the registration account to the upstream SIP server and was railing connection attempts (it filled up the console and there were literally thousands per second). Basically this caused all incoming and outgoing calls to fail.
It was a temporary fix but the solution was to block that specific IP, it's hard to stop it 100% because the customer needs the default SIP port.........
I'm using ecryptfs and was suddenly unable to access or even ls my home directory (but every subfolder is accessible). It just hangs and throws this message in messages/dmesg:
Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO
I read somewhere that perhaps some file or folder is owned by root somehow, sure enough there are some and sudoing to root allows me to........
This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad.
ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:00:........
After some fsck issues I can't boot my Centos 6.4, this just keeps repeating over and over.
init: tty (/dev/tty2) main process (1031) terminated with status 1
init: tty (/dev/tty2) main process ended, respawning
Disabling SELinux through Single User mode fixed this.........
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
user=mysql
# Disabling symbolic-links is recommended to prevent assorted security risks
symbolic-links=0
bind-address=127.0.0.1
The key is "bind-address", set that to 127.0.0.1 and no one from outside the server can connect.........
mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142)
One of my clients almost found out the hard way, here is an unlikely situation that happened.
1.) Years ago the client had another VPS to which they backed up a BLOG nightly to an .sql file, what they forgot is that the file also contained all databases (they used the --all-databases option but forgot). So imagi........
foreach ($_POST as $key => $value) {
if ( $key != submit )
{
$values.="$key=$value<........
This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others:
Choose CountryCanadaJapanUnited StatesUnited KingdomAfghanistan........
This is something many people and especially businesses worry about, or at least they should. Before throwing away a hard drive, returning a hard drive, or especially Warrantying/RMAing it, you should wipe the drive.
Linux provides the "shred" and "dd" utlities which work quite well. It seems even a single pass is good enough but by default shred will do 3 passes.
Here's an example of using shred in Linux (I use a custom made distribution from........
I find it very annoying that this mouse has buttons on the side where you grip it and the left one goes back in the browser and the right one goes forward. Imagine if you're filling out a form and hit it, most forms/websites have no protection against it.
Source: http://ubuntuforums.org/showthread.php?t=2065400
Here's how I fixed it with xinput, it's too bad there's no good standard GUI to........
mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sda3 /dev/sdb3
cat /proc/mdstat
Personalities : [raid1]
md2 : active raid1 sdb3[1] sda3[0]
1363020736 blocks super 1.2 [2/2] [UU]
[=>...................] resync = 8.3% (113597440/1363020736) finish=276.2min speed=75366K/sec
........
smartctl -a /dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: ATA WDC WD1600YS-01S Version: 20.0
Serial number: WD-WCAP03024940
Device type: disk
Local Time is: Mon Apr 29 21:40:07 2013 PDT
Device does not support SMART
Error Counter logging not supported........
If you move your hard drive(s) around to other computers/servers, you'll find that your eth0 keeps getting higher, the first time it will become eth1 and then eth2 etc and even higher if your server has dual or quad NICs. The reason is that udevd basically assigns eth0 tot he first NIC it finds and remembers it, if it encounters a NIC with a differentMAC, it assigns it one higher (eg. eth1).
See the example below, I have eth2 now so how doI fix it?........
Client Log
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 192.168.1.253 [192.168.1.253] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type 1
debug1: identity file /root/.ssh/id_d........
Kernel panic - not syncing: Attempted to kill init!
Pid: 1,comm: init Tained: G I------------- 2.6.32-358.el6.x86_64 #1
Call Trace:
[] ? panic+0xa0/0x16f
[] ? do_exit+0x862/0x870
[] ? fput+0x25/0x30
[] ? do_group_exit+0x58/0xd0
[] ? sys_exit_........
This is a handy link and list of all the relevant Directadmin log files and related servers.
http://help.directadmin.com/item.php?id=11
DirectAdmin:
/var/log/directadmin/error.log
/var/log/directadmin/errortaskq.log
/var/log/directadmin/system.log
/var/log/directadmin/security.log
Apache:........
-bash-3.1# shutdown -rn now
Connection to localhost closed by remote host.
Connection to localhost closed.
Sometimes I work with embedded systems/custom kernels without any of the fancy init scripts and other common Linux basics that most would expect. This means that often the "reboot" command (which uses an init script) will never work, not only that but it will hang the server and a manual power cycle or reboo........
start=1
increment=5
lines=`cat linesfile.txt|sed -n "$start","$increment"p`
The secret here is the power of sed.
Basically the example above would take the first 5 lines from the file. You could change it though to say take 20 lines starting from the 5th line by adjusting the start and increment values.........
vzquota : (warning) block_hard_limit [102] < block_current_usage [520824]
This is because your disk usage of the container exceeds the quota.
Eg. once on a test container I had accidentally set it to 32MB yet the OS took about 600MB.
Just set the quota to something bigger than the currently used space to solve it.
vzctl set 3891 --diskspace 5G:5G --save........
Solution To The Following:
yum -y install zlib-devel
yum -y install e2fsprogs*
*** Cannot find /usr/include/et/com_err.h. (yum install libcom_err-devel) ***
Installation didn't pass, halting install.
Once requirements are met, run the following to continue the install:
cd /usr/local/directadmin/scripts
./install.sh
Common pre-install commands:
http://help.directadmin.com/it........
mdadm --manage /dev/md3 --add /dev/sda1
cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md0 : inactive sdd2[1] sdd1[2](S)
31270272 blocks
md3 : active raid1 sda1[2] sdb1[1] sdc1[3](F)
943730240 blocks [2/1] [_U]
[>....................]........
I chose this because I heard a lot of stories about scams and that many providers I contacted said they can't unlock the Canadian I717s (one said "my Bell server" is down).
This method worked perfectly on my Bell I717M and should work for all I717 in Canada, I was able to insert a foreign SIMcard. This will work abroad too but remember entering CWM mode is different for I717's in other countries (at least theUS).
Step 1 - Root + CWM........
/usr/local/lib/php.ini........
Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........
Here's what SMART tells me the serial number is:
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HDS721010CLA332
Serial Number: JP2940HQ3ZY7KH
Firmware Version: JP4OA3EA
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is:&nb........
This was partitioned as a single 32GB VFAT but when I inserted it into the phone it said that it can't read it and now here is how the partition table looks. Interestingly enough the data works and reads fine from the computer still.
Disk /dev/sdb1: 32.1 GB, 32085360640 bytes
64 heads, 32 sectors/track, 30598 cylinders, total 62666720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum........
Failed to open a session for the virtual machine XP.
Failed to launch Remote Desktop Extension server (Unknown Status 0x80004005).
Disabled remote display:
Failed to load VMMR0.r0 (VERR_SUPLIB_OWNER_NOT_ROOT).
solution
chown root.root /usr/lib/........
Step #1 - Create Wrapper Script
vi /usr/local/bin/phpsendmail
#!/usr/bin/php
........
I have iptable_filter loaded on the hostnode so I don't understand this issue.........
Install unoconv
unoconv -d document -f pdf file.doc
Change "file.doc" to the name of your document. Note you could specify *.doc and it will convert all .doc's in the current directory to pdf which is very handy.
unoconv uses the cli from OpenOffice to do this, OpenOffice actually doesn't have an easy way I've found of doing this despite it having the functionality.
........
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
For whatever reason it seems the r8169 driver that ships and has shipped with most Linux distros for years is still flawed and does not work properly on these cards, causing 100mbit connectivity when it should be 1gbit and even worse, causing random network dropouts. The r8169 driver in Linux kernels is simply not meant to be used on th........
There are 3 pieces that are required to restore and make it work (of course consider if any kernel modules need to re-enabled and if you need to change the IPs):
Copy the vz/private/VEID directory to /vz/private
Copy the /etc/vz/conf/VEID.conf to /etc/vz/conf/
mkdir /vz/root/VEID
After that you should be able to see the VE in vzlist -a
You should then be able to start it normally.........
Usually a lot of things don't work right on Linux, but Samsung printers aren't one of them. I used to have a CLP310N that never worked right in Linux, it would print strange lines over pictures or with some programs, no picture at all. I was using whatever the default driver that Ubuntu found.
Now I upgraded to a CLP-365W which is basically the same thing with wireless but no driver from Ubuntu (eg CLP-350) works. I was forced to go to Samsung's site and was surprise........
This pops up when connecting the phone and it doesn't seem to charge. The phone keeps showing a status message every few seconds "Connected as a media device".
It's ridiculous why this phone doesn't just default as a simple USB Mass storage device.
Here's what I see in /var/log/messages:
Jan 30 18:51:27 QuadCoreAM2 kernel: [18038228.144046] usb 1-3: new high speed USB device using ehci_hcd and address 24
Jan 30 18:51:28 QuadCoreAM2 ke........
I like badblocks and don't know a better more reliable way of checking the drive. If there are no errors from badblocks and dmesg doesn't produce any SATA related errors, the drive should be good (for now at least).
I also prefer to do read and write mode, yes it takes ages but it is really the best way of doing it. This gives me the most confidence in knowing that a drive, especially a new one is at least OK at the moment.
To test in read only mode........
This seems to be a verified bug on KVM with no solution. I wasn't able to get through the installer with Ubuntu 12.04, it would crash while "configuring apt". I was able to install it with Ubuntu 12.10 but it crashes randomly at times.
This happens with the latest Centos 6.3 kernel and KVM package, I even compiled the latest version from the KVM website and used that, but the results are still the same.
Here's some links to discussion about the bugs:........
cat | grub --device-map=/dev/null
Now pay close to the attention of the beginning.
Type: "device (hd0) VPS.img" this is telling what hd0 will be to GRUB and we're telling it the disk image file "VPS.img" in the current directory is hd0, you can specify alternate paths and image names of course.
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-li........
This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel.
I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk.
I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one).
This is strange but it seems like this Xen PV guest has some sort of hidden or........
I closed program by program untilI found the culprit, it's baffling how the cause was Thunderbird but then again it does use a lot of memory and I have thousands of messages between dozens of mailboxes.
But still I don't think this should happen and Xorg shouldn't allow this either.
So for those who have mysteriously high CPUusage from Xorg start closing program by program until you find the culprit.
The interesting thing is that after reloading it, the Xor........
Inever started these processes but they are from a custom based bootable Linux I've made and I've never seen this behavior on other machines or even with the same machine using different kernels. These processes seemed to spawn on their own and I have no idea why and even worse why the CPU usage is so high?
Here's the output from top:
907 extaudit 30 10 0 0 0 R 90.7 0.0........
The example below converts youvm.img into a vdi.
The -O vdi specifies the new format will be vdi but you can use any other valid formats/vice versa.
qemu-img convert yourvm.img -O vdi yourvm.vdi
This is very handy for those who need to switch between virtualization technologies.........
Let's keep this simple, it's horrible, not only is the picture quality horrible (it's not a big deal) but the keyboard input is an issue. You have to type slowly, lightly and carefully otherwise 1-keystroke could end up being dozens of keystrokes.
It's also a confusing unit for many datacenter techs, I've seen these units hooked up wrong and the instructions themselves aren't clear. I had to resort to shipping one to my office and take my phone pictures of the setup for th........
arp -a
syst (192.168.1.122) at 21:96:43:3a:62:a2 [ether] on eth0
arp -d 192.168.1.122
If you get an error do:
arp -d 192.168.1.122 -i eth0
Sometimes the arp cache just won't clear either, some say it should automatically but there are cases where the above doesn't work. I believe it may be that some network applications are keeping the entry alive but this is just a guess.........
This is very handy if you're too busy and don't have time to download whatever files you need.
The -D specifies the domains allowed, this is because I specified -H which means foreign hosts are allowed, if you don't restrict them you'll end up going to the whole internet via ads and other links just like a search Engine would follow.
-l 0 specifies to go deep, to as many levels as possible/as exist.
-e robots=off is important because robots.txt often says you can't vie........
This is something I often setup for clients because it's very helpful for people in datacenters, this allows custom OS installs on demand, you can customize it more by using kickstart etc.. but here's a base I use before customizing more:
This little script below will install everything you need to get booting by PXE Linux.
It also assumes you set a local IP (be sure not to overwrite your existing IP) on eth0:0 (note the :0) as 192.168.1.10 and it........
The best way is to use rsync, I've set it up so it doesn't copy unnecessary files, or at least ones I'm sure aren't needed.
Here is the rsync command Iused (adapt to your specific Thunderbird profile location):
rsync -hazv user@remotehost.com:/home/user/.thunderbird/sbrer.default/* /home/user/.thunderbird/4nyb0.default/ --exclude=global* --exclude=Cache --exclude=ImapMail --exclude=Mail
This is a great way to get your e-mail accounts going on a new c........
Here is a quick script that works on most Centos versions to disable the virus/SELinux from blocking basic functionality.
The first echo 0 statement disables SELinux instantly but it will still be enabled on reboot.
The second line disables it permanently.
#!/bin/bash
#disable SELinux Immediately
echo 0 > /selinux/enforce
#disable SELinux Permanently
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config........
qemu-kvm-1.2.0]# ./configure
Disabling PIE due to missing toolchain support
glib-2.12 required to compile QEMU
Solution install glib2
*Don't confuse glib2 with glibc, they are different and it may catch some off guard.
yum -y install glib2*
After that KVM should compile and install just fine.........
This seems to be common for some reason when trying to run Windows 7 under KVM and 7 has always had strange issues with KVM. What happens for me is after the install it simply won't boot, it stays on the POST screen and does nothing.
For some reason it appears the boot sector either doesn't get installed or gets corrupted with KVM.
The solution is to boot the install disc for Windows 7 and reinstall the windows MBR into the boot sector:
1. Boot t........
qemu-img create -b centos.5-8.x86.20120308.qcow2 -f qcow2 ../kvmguests/25000-centos5.8x86.qcow2
Formatting '../kvmguests/25000-centos5.8x86.qcow2', fmt=qcow2, backing_file=centos.5-8.x86.20120308.qcow2, size=10485760 kB
-b the source/base image
-f format is qcow2 and the location of the destination image
What is so special about this? It's even quicker than creating a template with OpenVZ but this is an actual OS.
It saves time a........
mdadm --manage /dev/md1 --add /dev/sdb1
mdadm: metadata format 00.90 unknown, ignored.
mdadm: metadata format 00.90 unknown, ignored.
mdadm: metadata format 00.90 unknown, ignored.
mdadm: /dev/sdb1 not large enough to join array
md1's first primary member /dev/sda3 has 57394 cylinders while the /dev/sdb1 has 57393 (1 less cylinder) which is why it won't work.
fdisk -l /dev/sda3
Disk /dev/sda3: 47........
The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.5.3 Error: too many recipients.
We set this in main.cf:
smtpd_client_recipient_rate_limit=0
We didn't specify it before and the default is said to be 0/unlimited and it still didn't change anything.........
For whatever reason the current OpenVZ yum repo file enables the RHEL6 version of OpenVZ, why is this bad? Because if you're running Centos 5 it still defaults to using the kernel from RHEL6 which won't work on RHEL5/Centos 5.
Ionly realized this after wondering why I couldn't boot into OpenVZ that it was using one meant for RHEL6.
To fix the problem you have to edit /etc/yum.repos.d/openvz.repo and disable the "[openvz-kernel-rhel6]" section by changing........
parted sdc.img
GNU Parted 1.8.8
Using /home/one/sdc.img
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) unit&nb........
ip_conntrack: table full, dropping packet.
A lot of clients I've seen have this issue, it really seems the default level is way too small. Once this connection tracking table becomes full then packets get dropped which is obviously a bad thing.
One thing to be mindful of though is that 350 bytes of memory are used per entry so there is some justification for not keeping it too high. However, if you have multiple servers running or high traffic daemons........
A lot of people become nervous (and understandably so) when checking their auth or security logs, in Centos /var/log/secure and see dozens, hundreds of even thousands of attempted logins to various services, especially SSH.
Of course you could manually block these people/IPs but no one has time to read the logs like that, what if some program or script could do it for you?
This is what denyhosts does for you, it checks the logs and based on a certain number of failed SSH attem........
I backed up everything in the /mnt/sd_card directory thinking that some dataloss could occur for some reason but purposely left my microSDHC unbacked up thinking that "it won't touch that since it's external" and Samsung's and other manufacturers website even say this (that it won't be affected and not to worry etc).
Apparently I was wrong, my microSD was "undetected" and asked to be formatted after the upgrade (there goes 3-months worth of family photos). No........
This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server).
You may need to upgrade to PHP5.3 to run Joomla or many other reasons.
Your host needs to use PHP 5.2.4 or higher to run this version of Jo........
ntpd[7047]: can't open /var/lib/ntp/drift.TEMP: Permission denied
chown ntp.ntp /var/lib/ntp/
The solution is shown above and changes the ownership to ntp.ntp which is what the ntpd daemon/server is running as. This is based on Centos but the same idea will apply on any other OS. You can do a "ps aux|grep ntpd" to see what it is running as in the case it's running as a different user.
After that this annoying message wil........
00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device 9902
Backup your also.conf file
cp /usr/share/alsa/alsa.conf /usr/share/alsa/alsa.conf.bk
Change all instances of "card 0" to "card 1" (no need to manually do it, this command below does it all instantly and without fail or error:........
JFolder::create: Could not create directory
Plugin Install: Failed to create directory:
This can occur when trying to upload content or when installing themes/templates.
It's usually not a permissions issue per say but doing a 777 (which is very insecure) will fix it. But the real problem solution is that the owner of the files is different than the owner of the Apache process/server.
Eg. if your Apache is running as user "apache........
Disk /dev/sda: 320.0 GB, 320072933376 bytes
256 heads, 63 sectors/track, 38761 cylinders
Units = cylinders of 16128 * 512 = 8257536 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 38........
ERROR 1045 (28000): Access denied for user 'contentmanager'@'localhost' (using password: YES)
For fun I thought I'd reset the password:
GRANT ALL ON thecontent.* TO contentmanager IDENTIFIED by 'dfdfsdfdsfsdfsd';
ERROR 1470 (HY000): String 'contentmanager' is too long for user name (should be no longer than 16)
This is ridiculous that this new version has some bizarre 16 character username limit and not only that but i........
This array is a RAID 1 and in this case 1 of the 2 drives failed (a WD drive and I've found them to be the weakest and most unreliable of any brand and are easily damaged/DOA when shipping them).
mdadm --manage /dev/md0 --add /dev/sdb1
The above assumes the array you want to add to is /dev/md0 and the device we are adding is /dev/sdb1
*One thing to remember is to make sure the partition you are adding is the correct size for the array. You can also g........
This is just how I like things, quick and simple through CLI (command line) using gifsicle for free.
gifsicle --colors 256 --delay=200 --loop banner.gif banner-page2.gif > banner.gif
banner.gif = the first page of the banner
banner-page2.gif = the second page
--delay=200 ms to switch between the two
--loop=it goes back and forth between the two pages forever
banner.gif=the resulting animated gif.
There are many other opti........
I am running a 64-bit host and was running a 32-bit XPguest which was crawling no matter what I was doing with it,in fact it frequently used 100% CPU power while having no real work load. I experienced with this other guests and wondered why KVM was slow compared to say Xen or Virtualbox.
This is because you need to use the "-cpu" flag.
For a full list of options run:
/usr/libexec/qemu-kvm -cpu ?
x86 ........
CREATE TABLE articles_backup LIKE articles
The code above creates a new table called "articles_backup" which has the exact same structure and attributes as the original articles table.
CREATE TABLE articles_backup SELECT * FROM articles;
The above code does the same thing as the first example, BUT it also copies all of the data.........
VBoxManage modifyhd XP.vdi --resize 15000
VBoxManage modifyhd XP.vdi --resize 15000
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
That resizes the virtual hard drive image "XP.vdi" to 15000MB instantly.
I doubt this is safe to do while the VM is running and I'm not sure if it would attempt it still but turn the VM off first to be safe.
I also notice in the VBOX GUI that it still shows the orig........
After about 15 tabs I believe, they become hidden on the right side and are accessible only by furiously clicking the "right arrow" and even then it takes forever and honestly this hidden tab feature seems to slow down everything.
If you enter "about:config" in your browser without the quotes just set this value to get rid of this annoying (one of many new) feature from Firefox (set it to false and restart your browser):
services.sync.prefs.sync.brows........
In bash you test like this for problems that can be caused by non-printable characters since if you don't know how to identify it because it basically breaks your script.
echo "url=$url" should print something like this normally if you have properly formatted input/text:
url=::http://someaddress.com::
But if you have some weird hidden characters (not visible in a text editor of any sort you'll get something like this
::l=::http://s........
Error: detected vswap CT config but kernel does not support vswap
This means either old kernel or bad config (physpages NOT set to 0:unlimited)
Solution
vzctl set $veid --physpages 0:unlimited --save........
So you've just purchased your SSL cert, renewed it and installed it or maybe you've had it installed and working fine all the time with all other browsers but you've upgraded to a recent version of Firefox and suddenly get the warning "Error code: sec_error_unknown_issuer" error.
This is terrible since if you bought an SSL cert, you are most likely using it for trust purposes for your business and obviously that message will scare away most potential customers.........
iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
This solution applies to all other iptables modules/problems for OpenVZ, you'll just need to add them to both lists/lines below if you have modules other than what I have below.
The modules need to be enabled in both iptables and the OpenVZ hostnode itself and then the containers which need it must be restarted.
How To Enable IPTables Modules in OpenVZ........
It's really silly how DA doesn't enable SSL by default but is otherwise a stable, fast and secure control panel.
Here's a copy and paste way of enabling SSL for Directadmin in just a few seconds:
*setup SSL
openssl req -x509 -newkey rsa:1024 -keyout /usr/local/directadmin/conf/cakey.pem -out /usr/local/directadmin/conf/cacert.pem -days 9999 -nodes
That creates the public certificate and private key pair in the location Directadmin expects to fi........
I've encountered this problem before and I believe it may affect other drivers (I could test but I don't have time). This was happening on my custom Linux system with the pcnet32 driver.
pcnet32: eth0: transmit timed out, status 97fb, resetting (and some other kernel module tracing in dmesg)
Basically it means the card is connected (it shows connected in full duplex etc.. and recognized if the cable is disconnected too) but no packets can be sent or received........
I admit I didn't know you could do this for the longest time and is an annoying feature of screen.
In order to scroll up and down just hit "Ctrl+a+Esc" or "Ctrl+a+[" and then you can Pageup, Pagedown and using the arrow keys.........
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: Local version string SSH-2.0-OpenSSH_4.3p2 Debian-9etch3
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
Solution, disable auth from the ssh client (this is a client side error)........
wget -N http://httpupdate.cpanel.net/latest;sh latest
That one command above will do it all (and it takes a long time to install/compile). After that you can access CPanel with your root login information by visiting https://yourdomain-or-ip.com:2087
I personally don't like CPanel (bloated, full of bugs, no shared SSL, difficult to use etc..)but I admit it's easier to install than........
I experienced this with CPanel's Exim after an auto-update (a Google of this error produces lots of complaints with few clear solutions). In this case I'll put the solution at the top.
Run /scripts/buildeximconf to rebuild the Exim config and it should be fine after that.
mail -vs "from test" user@dest.com < .bash_history
LOG: MAIN
cwd=/root 4 args: send-mail -i -v user@dest.com
LOG: MAIN
&........
For years I've always built cheap systems believing that there is little difference in more expensive components when it comes to reliability and quality, I generally believe this still except for Power Supplies.
I've always bought cheap cases with nice sounding 350-550W stock/cheap/crap power supplies and haven't had any issues for the most part until recently.
One such case is an NGEAR case with a 550W Optimax power supply, I always read that these supplies don't produce the........
I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen.
I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........
When double clicking nothing happens/it doesn't open and when executing as ./firefox-bin you get this error:
./firefox-bin: error while loading shared libraries: libxul.so: cannot open shared object file: No such file or directory
All the .so files reside within the directory of Firefox that you extract from the binary .tar.gz from Mozilla, it's just that your computer doesn't know/recognize where to look for them.
Solution:........
I'm running Ubuntu 10.10 with Asus NVIDIA GT430
2.6.35-32-generic-pae #65-Ubuntu SMP Tue Jan 24 14:06:16 UTC 2012 i686 GNU/Linux
Nvidia binary driver: 260.19.06
The screen sometimes completely freezes and locks up or everything starts going very slow:
[1903398.100007] NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context
[1903402.373210] NVRM: Xid (0001:00): 53, CMDre 00000000 00000080 00000000 00000005 00........
fdisk -lu VPS.img
last_lba(): I don't know how to handle files with mode 81ed
You must set cylinders.
You can do this from the extra functions menu.
Disk VPS.img: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders, total 0 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End ........
One of my test Centos 5 containers was on a partition that filled up and it threw all sorts of errors and stopped responding but now I can't boot it again anymore.
All the console shows is the Linux Penguin on the top left corner and the xm console says "usbcore: registered new driver hub" and has halted there.
Centos 5 Xen container stuck/frozen won't boot on "usbcore: registered new driver hub"
Another great way of troubleshooting is booting fro........
This was very annoying but has a simple fix, I had an echo and the voice quality was absolutely horrible (it sounded like tin cans under water) if that helps describe it. It was extremely distorted.
The simple Skype sound quality solution
Go to "Options" -> "Sound Devices"
Disable the "Allow Skype to automatically set my mixer levels"
After doing this the sound qua........
This is what I call a ridiculous bug in compiz that causes it.
The solution/To fix it just install "compizconfig-settings-manager"
Open it up and Navigate to General Options -> Display Settings
Set the "Refresh Rate" to the current refresh rate of your monitor.
For ATI cards with slow window dragging/response supposedly disabling "Sync to VBlank" fixes that but otherwise leave it as is.........
Stuff like this always happens/breaks after a vzctl update, whether it's new parameters being added or required etc..
File /etc/vz/conf/ve-vps.basic.conf-sample not found: No such file or directory
Fix the value of CONFIGFILE in /etc/vz/vz.conf
Creation of container private area failed
Warning: distribution not specified in CT config, using defaults from /etc/vz/dists/default
WARNING: /etc/vz/conf/4400.conf not found: No such file or directory........
I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene. This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately).
The most common reason may be that "linux-source" hasn't been installed automatically on my system. I tried to manually reinstall the........
I really am a Linux fan but my comments here may not show it. Although I'm quite familiar with Linux CLI to administer servers, I find Linux GUI OS's like Ubuntu at times very clunky.
This is partially because there's no such thing as a "self-made" Linux from scratch where the UIwas designed by a single team. Linux is made up of several different projects that are generally completely separate and this lack of integratiion is a key issue that makes things f........
Failed to initialize monitor device 95% power on
Solution
/etc/init.d/vmware-core start........
PDOException: SQLSTATE[42000] [1044] Access denied for user 'db_user'@'localhost' to database 'dbname' in lock_may_be_available() (line
167 of /home/user/public_html/includes/lock.inc).
The username and password were correct but some reason CPanel added the user with no permissions! Edit the user's permissions to include "All" from Cpanel or MySQL and that is the solution.........
It really is as simple as:
cdrecord -v dev=/dev/sr0 pathtoyourisoimage.iso
-v is for verbose, I prefer it but if you don't you won't see as much output like below (I like to know the details and exactly what's happening)
dev=/dev/sr0 specifies the device name of your burner (they say not to use it and to specify some weird annoying device string but using the raw /dev has always worked for me and is how it should have been implemented from the start IMHO)........
Even in new versions of Ubuntu this happens but for me I found out it was because of one feature under "Power Management".
I had "Spindown hard disks when possible" ticked, after disabling that, my computer wakes up from suspension every time now. So if your computer won't unsuspend with any version of Ubuntu/*Nix try disabling the spin down hard disk option as it's obviously the culprit for many situations.........
*Make sure that the ownership is 501.501 or mobile.mobile when copying back (especially if using ssh or sftp as root on the iPhone) otherwise things will break. Eg. the contacts will be blank even after trying to update due to incorrect ownership/permissions.
iPhone Notes Location/Restore:
/private/var/mobile/Library/AddressBook
AddressBookImages.sqlitedb AddressBook.sqlitedb
Once you restore the contacts and restar........
Visit http://linux.softpedia.com/get/Programming/Interpreters/Android-32340.shtml
Basically copy and paste all of that below and you'll have installed and started the Android SDK before you know it.
wget http://dl.google.com/android/android-sdk_r12-linux_x86.tgz
sudo apt-get install openjdk-6-jre openjdk-6-lib openjdk-6-jre-headless
tar -xvf android-sdk_r12-linux_x86.tgz
cd android-sdk-linux_x86/tools
./android........
gocr works great and it's simple, just invoke it like so:
gocr filename.png
The output will be printed to the screen.
My only complaint/concern is that even with standard terminal output (not scanned) from a printscreen, gocr does make mistakes by inserting extra spaces where they don't belong, mistaking letters for numbers etc.. but it's definitely enough to be readable and figure out what you're looking at.
I haven't tested yet with scanned input........
These were caused by a bad stick of Corsair RAM
[] free_hot_cold_page+0xfc/0x150
[] __pagevec_free+0x14/0x1a
[] release_pages+0x127/0x12f
[] __pagevec_release+0x15/0x1d
[] __invalid_mapping_pages+0x120/0x156
[........
The first Hitachi Deskstar 2TB 5K3000 drive I bought arrived DOA for whatever reason (not recognized by the BIOS or OS). Perhaps it was shipping since I bought only 1 hard drive. When I bought 4 through another Vendor, all 4 checked out fine.
I was worried about the RMA process because a lot of people have complained about Hitachi taking weeks to send out their hard drive and almost implied the warranty is useless.
I'm happy to report that my experience was great a........
carat M isn't this symbol ^ that you think, it can only be produced by typing "Ctrl-v, Ctrl-m". That you might see in text files saved from Windows.
tofrodos is the package that has dos2unix which is basically the same scripts that replace ^M with /n
tofrodos is the Debian/Buntu package name which has the dos2unix and unix2dos binaries........
The normal solution would be as follows:
export DISPLAY=:0.0
/usr/lib/vino/vino-server &
But what happens if that doesn't work? I haven't been able to find much documentation about how to find the list of displays and how their numbering works in Xorg.
Sometimes you'll get this error when trying to restart vino:
Cannot open display:
For some reason my display is not on 0.0........
Within vi if you can't exit /etc/vim/vimrc you can type
:syntax off
And to turn it back on:
:syntax on
Many of us have a dark/black background in our terminal/shell making the default syntax unreadable, the solution is to either turn off syntax highlighting with :syntax off or to enable a special option in /etc/vim/vimrc
Edit /etc/vim/vimrc
The "syntax on" enables the highligh........
It may be hard to find by Googling by it's really quite simple and quicker than reading dozens of man page entries.
sed -n 5p somefile.txt
Just replace the 5 with whatever line you want to be printed.........
Have you ever found a website/page that has several or perhaps dozens, hundreds or thousands of files that you need downloaded but don't have the time to manually do it?
wget's recursive function called with -r does that, but also with some quirks to be warned about.
If you're doing it from a standard web based directory structure, you will notice there is still a link to .. and wget will follow that.
Eg. let's say you have files in http://serverip/documen........
I'll start by showing some problems in the logs:
[2011/08/07 16:22:06, 0] param/loadparm.c:8569(process_usershare_file)
process_usershare_file: stat of /var/lib/samba/usershares/movie failed. Permission denied
[2011/08/07 16:22:06, 1] smbd/service.c:676(make_connection_snum)
create_connection_server_info failed: NT_STATUS_ACCESS_DENIED
That means you don't have permission to access the fi........
A few days ago this happened on multiple Centos 5 servers and apparently anyone using rpmforge was affected by this error and there was no solution other than disabling that repo to fix it.
To some this highlighted a few points, that there is a reason RHELexists with full paid support, and also that this could be a vulnerability and huge flaw with yum. A yum search or install should not segfault just because the rpmforge repo goes down.
Fortunately it came back up........
dd if=/dev/sda of=/dev/null creates ever increasing load every second.
After minutes the load has moved up to 4.79
I've tried with two different discs in my system.
I wonder if it's a delay or problem with the SATA bus because one drive I have connected has recently failed.
I notice when drives fail that you get some IO/blocking issue when they don't respond properly.
Yes I believe it was, because here's the same disc after removing the dead........
netstat is weak and can't show udp connections and most other protocols, use "ss" which is what netstat should have been:
The "-u" switch stands for udp, here's a list of other options:
Usage: ss [ OPTIONS ]
ss [ OPTIONS ] [ FILTER ]
-h, --help this message
-V, --version output ver........
Starting online migration of CT 25000 to 192.168.5.1
Preparing remote node
Initializing remote quota
Syncing private
Live migrating container...
Error: Failed to suspend container
CPT ERR: f68cf000,25000 :foreign process 15755/14731(vzctl) inside CT (e.g. vzctl enter or vzctl exec).
CPT ERR: f68cf000,25000 :suspend is impossible now.
CPT ERR: f68cf000,25000 :foreign process 15755/14731(vzctl) inside CT (e.g. vzctl enter or........
I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM.
I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives?
Also no swap space was ever used!
cat /proc/s........
I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem:
We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........
I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior:
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZ20139
Firmware Version: 50.0AB50
User Capacity: 2,000,398,934,016 bytes
Device........
Warning: Unable to open /dev/fd0 read-write (Read-only file system). /dev/fd0 has been opened read-only.
That's a very annoying error, it's simply because Centos for some reason thinks it's wise to load the "floppy" kernel module, who has a floppy drive? I haven't seen or used a floppy for over 12 years!
It's more than just annoying, if you probe the drives attached to your system, eg. with grub or partprobe, it keeps trying to locate a flopp........
It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work.
I only get this error with the openvz.repo and not others such as Centos-Base.repo
With my other server it works normally:
================
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename.]
grub> root (hd1,0)
Filesystem type is ext2fs, partition type 0xfd
grub> setup........
I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead):
ata1: link is slow to respond, please be patient (ready=0)
ata1: softreset failed (device not ready)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: link online but device misclassified, retrying
ata1: link is slow to respond, please be patient (ready=0)
ata1: softreset f........
This assumes that you've at least created the correct partition for your DRBD already.
Notice that I am "diskless", that's because either your DRBD partition doesn't exist/has been renamed (eg. sdb becomes sda when sdb dies and you reboot) or because that drive is really actually dead/gone.
*If you need to permanently change the partition/device for your resource be sure to edit /etc/drbd.conf on both hosts and reload the config.
(replace r0 with........
I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though.
There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........
One thing to note about DNS servers and providers is that they aren't always trustworthy, not even if they're Google or your favorite ISP. Any DNS server can compromise your privacy, and they are likely tracking your browsing habits and keeping logs of it. Sometimes it's for Marketing/Research purposes such as Google's GMail service which they admit is scraped/datamined. I would expect nothing less from their DNS service.
The other danger with such widely used and pu........
Normally if you're in a certain directory you could do:
find *.txt and it will work as expected, but it won't work recursively through child directories, here's the correct way to do it:
find . -type f -name *.txt
The "-type f" is optional because that means only files, but we could have specified d for directory etc...
The above command will work recursively as you'd expect. In that way I find "find" to be un........
In file included from drivers/block/cciss.c:1015:
include/asm-generic/pci-dma-compat.h: In function `cmd_special_free':
drivers/block/cciss.c:196: sorry, unimplemented: inlining failed in call to 'cciss_tag_discard_error_bits': function body not available
include/asm-generic/pci-dma-compat.h:25: sorry, unimplemented: called from here
make[2]: *** [drivers/block/cciss.o] Error 1
make[1]: *** [drivers/block] Error 2
make: *** [drivers] Error 2........
May 6 08:16:57 devbox spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#2 of 3): Connection timed out
May 6 08:17:02 devbox spamc[20214]: connect to spamd on 127.0.0.1 failed, retrying (#1 of 3): Connection timed out
spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#3 of 3): Connection timed out
First make sure that the spamd service is actually running, this is your spamd (spamassassin server) cannot be reached. In my c........
If you have a webserver and find you have high IO/lagginess MySQL is one of the first things to check. It turns out MySQL was my problem and it was creating a high load on my server, especially for IO.
How to Enable MySQL Slow Query Logging To Find Slow Performance/Queries
vi /etc/my.cnf
Add this anywhere under [mysqld]
#slow queries
log-slow-queries = /var/log/mysql/mysqlslowqueries.log
long_query_time = 1........
mod_status is a great way to track down the source of high CPU usage and to find what vhost/script is the cause of it.
It gives you a live view of bandwith usage, CPU usage, and memory usage broken down by domain/vhost and script/URI.
Enable mod_status
vi /etc/httpd/conf/httpd.conf
ExtendedStatus On
SetHandler server-status
Order Deny,Allow
Deny from all
All........
yum -y install vnstat
chown nobody.nobody -R /var/lib/vnstat/
#replace venet0 below with your desired interface
sudo -u nobody vnstat -u -i venet0
#edit: vi /etc/sysconfig/vnstat
#VNSTAT_OPTIONS="-i venet0"
# only use the sed below if you are using venet0 instead of eth0 or replace accordingly
sed -i 's/eth0/venet0/g' /etc/sysconfig/vnstat
[root@monitor]# yum install vn........
I was getting frustrated with trying to write a simple URL like this:
/example-withdash
I used the htaccess code like this:
Rewriterule ^example-withdash$ / [R=301]
I also tried escaping the dash which I thought should have treated it as a literal but that didn't work either:
Rewriterule ^example-withdash$ / [R=301]
But it wouldn't work, apparently the "-" dash means don't substitute,........
Error Detected........
I found this technique listed in many places which shows you how to use a common Linux tool "dd" to dump the raw partition of your iPhone.
I give credit to this site for showing me the correct way to dd from the iPhone, I never thought to try it in the other direction:http://log.ijulien.com/post/182804914/iphone-3gs-data-recovery
Requirements
1.) Jailbreak your........
I was afraid to remove the virtualbox 3.2 package in Ubuntu because I didn't know if it might remove the .virtualbox folder which contains all of my VM data.
I have a backup soI did remove the package and found everything was intact, so I installed and upgrade to VBOX 4.0 which seems to be a huge improvement, especially in UI performance.........
http://www.splitbrain.org/blog/2010-06/15-linux_ocr_software_comparison
They did a great writeup and comparison on the different OCR options available for Linux.........
The fix for this was setting the correct permissions in /var/lib/php, it needs to be "root.root"
And /var/lib/php/session needs to be "root.apache" to work properly.
After that I was able to login to phpMyAdmin as normal. This whole thing happened because I accidentally changed all of /var/lib to root.root.........
smartctl -t long /dev/sda (note you can specify short, but it's not as thorough as long of course).
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended sel........
mysql errors even though these files do exist:
110405 13:21:37 InnoDB: Operating system error number 13 in a file operation.
InnoDB: The error means mysqld does not have the access rights to
InnoDB: the directory.
InnoDB: File name ./ibdata1
InnoDB: File operation call: 'open'.
InnoDB: Cannot continue operation.
110405 13:26:15 InnoDB: Operating system error number 13 in a file operation.
InnoDB: The error means my........
My Samsung drive failed on me, at first I thought it was the enclosure but a direct SATA connection causes the same problems for discs that are inserted. It will work fine for a few minutes but then starts spewing the errors below.
I've never been a fan of Korean made optical drives and have always had trouble with them. The problem is that I don't believe NEC and Lite-ON make drives anymore, and I considered them the leaders.
Apr 7 11:58:48 bo........
You need to enable the httpd daemon with monit to actually view the status and control, it's not only for the web interface since the httpd is theONLY way of controlling monit and viewing the status.
monit monitor all will also reinstate disabled services if they've timed out too much. Just restarting the service will do nothing to re-monitor a service that monit has stopped monitoring due to too many failures.
*Also note that /etc/monit.conf i........
My mother needed a new laptop and I recommended her the same one I would have bought myself or my wife, that means the cheapest possible laptop with the most features for the money.
This HP shines at this price point and one thing that made me stay away from buying more and recommending HP/Compaq was the poor battery life. Not anymore, this model has an industry leading up to 4 hours of battery life.
Key Factors for Choosing It:
HDMI Out........
After Installing pgina I couldn't login to Windows anymore with my blank password Administrator account!
An unknown error has prevented your account from being created.nrThis may be due to policy or security settings as well as other machine configuration.nrPlease consult your administrator.
Hit F8 to start Windows in Safe Mode and you can login normally and then remove PGina, it shouldn't cause this problem or behavior out of the box.........
convert -density 400 somepdf.pdf -scale 2000x1000 output.jpg
The key is the "-density 400" switch and also -scale 2000x1000
To give credit I found the solution here: http://www.imagemagick.org/discourse-server/viewtopic.php?f=1&t=10928
That was the perfect solution when I was frustrated with how small the resulting JPG's resulted. I'm sure this will help a lot of people when it comes time to converting a PDF to JPG which I'm amazed Imag........
high IO wait
424 root 39 19 1900 848 552 D 0.0 0.0 0:00.91 updatedb
root 424 0.0 0.0 1900 848 ? DN Mar11 0:00 /usr/bin/updatedb -f sysfs?rootfs?bdev?proc?cpuset?binfmt_misc?debugfs?sockfs?usbfs?pipefs?anon_inodefs?futexfs?tmpfs?inotifyfs?eventp........
Santrex Review/Scam/Complaint
Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support admitted the server was not working and to wait for 24 hours. I waited for 4-days, after which they sent an e-mail saying my service was being disabled for SPAM ...(when SolusVM shows 0kb of traffic). Th........
Virpus Review/Scam/Complaint
Virpus is advertised on LEB (lowendbox.com). My initial payment was refunded after days of not receiving the VPS, but two subscrption payments went through and Ionly received notification after the second one. They ignored the requests in the ticket and by e-mail for a refund and even escalated the PayPal dispute that "we're assuming this is for a service that was provided" (when they obviously know otherwise by........
There are all kinds of threads and links on the internet, and this seems to be a contentious issue butI don't know why.
95th percentile is either a good deal for some or a big rip off for others, Ijust said it there :)
But the reality is that for MOST people who transfer low amounts of data but burst to higher speeds such as 40mbit+ even for short periods of time, then you'll pay a lot of money to do that.
Basically 95th percentile is an-old archaic method........
Failed to open a session for the virtual machine XP.
AMD-V is being used by another hypervisor. (VERR_SVM_IN_USE).
VirtualBox can't enable the AMD-V extension. Please disable the KVM kernel extension, recompile your kernel and reboot (VERR_SVM_IN_USE)
Solution - Unload KVM module (you can't use two hardware virtualization suites at once)
sudo rmmod kvm_amd kvm........
find what MPM Apache is using, it will either be using "worker" or "prefork"
apachectl -l
Compiled in modules:
core.c
prefork.c
http_core.c
mod_so.c
In my case it is "prefork"
vi /etc/httpd/conf/httpd.conf
Find the section that looks like this (by default one will normally exist for prefork and for worker, but in my case I only care a........
*Remember to restart spamassassin after all of this.
DCC
wget http://www.dcc-servers.net/dcc/source/dcc.tar.Z
tar -zxvf dcc.tar.Z
cd dcc-1.3.138/
./configure;make;make install
#enable DCC, uncomment the line that disables it near the top
vi /etc/mail/spamassassin/v310.pre
pyzor
wget http://sourceforge.net/projects/pyzor/files/pyzor/0.5.0/pyzor-0.5.0.tar.gz/down........
kernel 2.6.27.54
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
mptbase: ioc0: Initiating bringup
mptbase: ioc0: WARNING - Unexpected doorbell active!
mptbase: ioc0: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000001!
mptbase: ioc0: ERROR - Diagnostic reset FAILED! (102h)
mptbase: ioc0: WARNING - NOT READY!
mptbase: ioc0: ERROR - didn't initialize proper........
These are the only two I've encountered but here is the low-end and note my story is not at all unique.
In my case I was scammed out of money and did not receive any service at all from either company.
Santrex Review/Scam/Complaint
Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support adm........
Centos 5 Postfix and SPAMASSASSIN Tutorial
yum install spamassassin
chkconfig spamassassin on
vi /etc/mail/spamassassin/local.cf
##############
#required_hits 5
#report_safe 0
#rewrite_header Subject [SPAM]
#5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives
require........
SPAMASSASSIN
Disable OpenWhois RBL (it is dead/defunct/no longer active):
You might see this in your headers
2.4 DNS_FROM_OPENWHOIS RBL: Envelope sender listed in bl.open-whois.org
comment out this inside /usr/share/spamassassin/72_active.cf
##{ DNS_FROM_OPENWHOIS
ifplugin Mail::SpamAssassin::Plugin::DNSEval
header DNS_FROM_OPENWHOIS eva........
I'm posting this because it wasn't easy or obvious how this would be accomplished and the man page leaves it to guesswork.
Multi-line body_checks
Example 1
/........
ls
ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory
This is not an ldd problem or case of anything missing, this only happened after I upradedUbuntu.
declare -x PATH="/home/user/bin:/usr/local/bin:/usr/bin:/bin:/usr/games"
"/home/user/bin" is the problem! It's weird because I have no idea how it happened.........
xmessage "Your message here" -display :0
This will popup a window with the message, it would be cool if it allowed two way communication though.
I found the info in this post: http://en.andregondim.eti.br/?p=72........
Use "ImageMagick" which can be installed easily on most UNIX/Linux distros.
Remember that it will go with the standard file listing to determine the order but I believe you can manually specify multiple jpg's in the arguments.
Convert image/jpg to PDF
convert *.jpg yourpdf.pdf
This is a very handy and free tool.
Convert DOC/TXT documents to PDF
If you wanted to convert a .doc file or text........
When migrating away from Plesk I couldn't figure out an easy way to get a straight list of all e-mails, but here is where I found the solution:
http://nakuls77.wordpress.com/2008/08/30/details-of-email-ftp-database-users-from-psa-database/
mysql> SELECT mail.mail_name, accounts.password, domains.name FROM mail, accounts, domains WHERE domains.id=mail.dom_id AND mail.account_id=accounts.id;
mysql> SELECT CONCAT(mail.mail_name,’@’,domains.name) AS Em........
Amarok won't play songs, keeps skipping to the next
Some say install install phonon-backend-xine
but it was already installed automatically, obviously that's not the problem or solution.
Settings -> Configure Amarok
Playback: Configure Phonon
Audio Output: Music
It should show your different audio interfaces, choose Pulse Audio and move it to the top of the list, do the Apply, OK and manually quit Amarok (remember to close it from the tra........
I right clicked all applicable cells and chose "number" but that's enough.
I notice when I click the cell there is an invisible ' in front of the number:
'33.64
Calc imported my CSV and decided to add a ' in front of the numeric currency values!!!*Actually the problem occurs when you right click the cells and change the type from text to number, no matter what format you choose.
If I change it to be currency i........
Convert MBOX Mail files into Maildir using Linux
*You need perl an the TimeDate module
Get the free Perl script mb2md from the project/author's site:
wget http://batleth.sapienti-sat.org/projects/mb2md/mb2md-3.20.pl.gz
gunzip mb2md-3.20.pl.gz
#remember you need timedate or you'll get this error:
./mb2md-3.20.pl
Can't locate........
don't delete /var/lib/mysql/ib_logfile0 or ibdata1 or mysql won't restart
I didn't realize they were internal and not part of replication like the relay files!
/usr/libexec/mysqld: ready for connections.
Version: '4.1.22-log' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution
110127 16:31:00 [Note] /usr/libexec/mysqld: Normal shutdown
110127 16:31:00 InnoDB: Starting shutdown...........
Basically you should always be 100% sure that whatever IPyour mail server sends out with has reverse DNS/PTR records. Remember that unless you own your IPs then you won't be able to set your own reverse DNS. Even if you were to create a reverse PTR record on your DNS servers it will be ignored. Reverse DNS is queried to pre-assigned DNS servers of your ISP, so therefore you'll need to contact your ISP/Colo/Hosting provider to do a reverse DNS entry.
If you don't have........
Many people aren't aware but recently Dual-Master Replication setups have become increasingly popular. That's because you get similar features and benefits of having a full-blown cluster (difficult to setup and maintain and requires I believe 3 servers just as controllers).
With a dual-master you just have a different off-set for the keys and you should be good, but of course there is the chance that at some point replication will halt because of an unexpected or unforseen error........
Create Cert & Key:
openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key
mkdir /etc/mailssl
chmod 700 /etc/mailssl
cp server.* /etc/mailssl
Postfix SSL config
Edit /etc/postfix/main.cf:
#SSL stuff
smtpd_tls_cert_file = /etc/mailssl/server.crt
smtpd_tls_key_file = /etc/mailssl/server.key
To make smtps w........
I think this will be useful to others because I have a server that kept crashing mysteriously during intense disk usage/RAID checks. It would only crash during the weekly RAID integrity check.
ThenI noticed during a reboot that not all CPUs were being brought up, as a result this actually creates much higher temperatures with the output I got from sensors, just booting the system produced higher than normal temperatures.
You can imagine that a full blown RAID check........
understanding /etc/aliases
*remember to apply changes you need to run "newaliases" after editing /etc/aliases
one thing I don't get is that it doesn't allow you to specify the whole e-mail address on the left-hand side
eg:
yourfullemail@domain.com: someotheremail@domain.com
postalias: warning: /etc/aliases, line 109: name must be local (if you try the above)
It works more like this:
your........
Openvz problem, it is confusing because it's an inode issue and there is enough free space.
cp: cannot create regular file `forums/memberlist.php': Disk quota exceeded
/dev/simfs 60G 20G 41G 33% /
none 2.0G 4.0K 2.0G 1% /dev........
mysqldump does not include CREATE DATABASE statement
you need the --databases option
"--databases" is misleading, it implies in the documentation that this is a list of databases to be dumped, it should be clear that uses this command in conjuction with dumping a single database also adds CREATE DATABASE and is the only way to get the database to automatically create itself.........
PHP5 & Apache Blank Screen/Page
The PHP package is installed and works from the CLI
Error reporting is enabled
The only way I could get it working was:
rm /etc/php.ini
yum remove php
yum install php-* -x php-pear* -x php-pecl*
Interestingly enough reinstalling php did not bring back the deleted php.ini but everything is working.
........
CPU/Kernel/MB/RAID problem?
Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168]
Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........
php won't work with absolute links
Warning: imagecreatefromgif(/images/header.gif): failed to open stream: No such file or directory in /vhostsdir/httpdocs/images.php on line 15
That is how my path is structured and ONLY likes the true full path as /vhostsdir/httpdocs/images/header.gif
Why can't it work relative to the vhost directory with absolute links just like say an html link would.........
Webmin/Virtualmin when enabling bind:
Failed to save enabled features : Virtualmin is configured to setup DNS zones, but this system is not setup to use itself as a DNS server. Either add 127.0.0.1 to the list of DNS servers, or turn off the BIND feature on the module config page.
It means what it says, add "127.0.0.1" to /etc/resolv.conf........
Plesk 8.6 CLI backup:
/usr/local/psa/bin/pleskbackup domains domain.com
This is a much better way of doing it and of course it can be scripted, it's a real pain to point, click and wait for Plesk to backup domains (and yes Iknow you could do all of them in a single client file but this is not desirable for my situation).........
Importing Plesk 8.6 Backup to Virtualmin:
Validating migration file ..
.. validation failed : XML::Simple Perl module is not installed
Solution is to install the correct module:
perl -MCPAN -e 'install XML::Simple'
Migrating a single domain works just fine, but it doesn't work with a full client backup containing multiple domains.........
I found the cause of this issue was from all the diskspace being used but clearing it was not enough. Iguess the tables became inconsistent when space ran out and myisamchk is what fixed the rest.
service mysqld restart
ERROR! MySQL manager or server PID file could not be found!
....................................................................................... ERROR! Manager of pid-file quit without updating file.
se........
Webmin Setup Centos 5:
wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet
[1] 24229
[2] 24230
[root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html
Resolving downloads.sourceforge.net... 216.34.181.........
The normal solution doesn't help or apply here:
ssh -v user@192.168.5.41
OpenSSH_4.3p2 Debian-9etch3, OpenSSL 0.9.8c 05 Sep 2006
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 192.168.5.41 [192.168.5.41] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: i........
That is pinging to the gateway IP on the same switch, the same IP is pingable externally without any problems which makes me think the switch is fine.
64 bytes from 55.55.55.55: icmp_seq=4 ttl=255 time=1.07 ms
64 bytes from 55.55.55.55: icmp_seq=1 ttl=255 time=3536 ms
64 bytes from 55.55.55.55: icmp_seq=2 ttl=255 time=2536 ms
64 bytes from 55.55.55.55: icmp_seq=3 ttl=255 time=1536 ms
64 bytes from 55.55.55.55: icmp_seq=8 ttl=255 time=1.20 ms
64 by........
This doesn't seem to be widely known (maybe it's in some documentation that none of us read though)but there's an easy way to check the integrity of any mdadm array:
sudo echo check > /sys/block/md0/md/sync_action
-bash: /sys/block/md0/md/sync_action: Permission denied
sudo will never work, this only works as root since echo is not actually a binary/command. It is built-into bash.
/sys/devices/virtu........
Install the "Editors" and "Net" groups that will give you rsync, ssh, ssh-keygen and cron.
The trickiest thing that I keep forgetting about each time is you have to run "cron-config" which adds the cron service to Windows, and without doing that obviously no cron jobs will be run thus making automatic backups impossible.
Warning about rsync/cygwin and using the -a archive switch.
It's a good thing I caught this because it doesn't work ri........
This really made me nervous but notice the mdstat says "check". This is because in Ubuntu there is a scheduled mdadm cronscript that runs everyday on Sunday at 00:57 that checks your entire array. This is a good way because it prevents gradual but unnoticed data corruption which Inever thought of.
As long as the check completes properly you have peace of mind knowing that your data integretiy is assured and that your hard drives are functioning properly (I'........
There's no partial WD EARS alignment fix:
I had data on /dev/sda3 and /dev/sdb3 (RAID1) so I couldn't edit that one.
I thought I'd be smart and try fixing the first two partitions so I set the first one starting at sector 2048 and then +8 for the second partition.
This has really slowed the performance down worse than it ever was!
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, tot........
It seems nearly anything can make rhythmbox crash, I've always found it buggy.
This crash seems to be something related to ecryptfs but it's hard to say. After re-opening rhythmbox so it sits in the Gnome panel/tray, and letting it load/find all of my songs let's it work again. If I show it too soon (I wait 10-15 minutes for everything to scan first) then it will crash over and over.
[171938.995645] ecryptfs_read_and_validate_header_region: Error........
What this really refers to is gnome-volume-control-applet which is what controls the volume in the panel/indicator applet.
In Ubuntu 10.04 it is just the applet mentioned above, run that from the command line and it will start.
I lost mine when I removed pulseaudio trying to fix audio issues with Flash and Opera. It also removes the gnome-volume-control-applet from starting. *Ialso note........
I've only used it on Centos, soI thought I'd make a quick Debian guide:
Install the DRBD Package
apt-get install drbd8-utils
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libswfdec-0.8-0
Use 'apt-get autoremove' to remove them.
The following........
I wanted to Import/Use a .vmdk hard disk image file from VMWare. Generally you can just "point" VirtualBox to it and use it and it will work but I found an exception.
One of my Centos 4.4 x64 images wouldn't boot. I had two copies, an older one and the newer one. The older one booted as normal (once I changed the VirtualBox driver to IDE from SATA). The newer one stopped at the "GRUB loading" message no matter what I tried.
As far as........
For many reasons you may be dealing with a standard text file and you want to know if there are any duplicate lines:
Here's how you do it:
cat filename|uniq -c
The "uniq -c" program counts how many time each line occurs.........
yum exits in the middle
The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either.
echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk
L........
hdparm -B 255 /dev/sdb
/dev/sdb:
setting Advanced Power Management level to disabled
HDIO_DRIVE_CMD failed: Input/output error
The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well).
-S set standby (spindown) timeout
hdparm -S 251 /dev/sda
/dev/sda:
setti........
I separated the 2 drives in the RAID 1 array.
1 is the old one /dev/sda and is out of date, while the separated other one /dev/sdc was in another drive and mounted and used with more data (updated).
I wonder how mdadm will handle this:
usb-storage: device scan complete
md: md127 stopped.
md: bind
md: md127: raid array is not clean -- starting background reconstruction
raid1: raid set md127 active with 1 out of 2 m........
Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive.
This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series.
To make it worse this is also when Western Digital introduced "Advanced Format" o........
This is an easy fix and highlights a huge issue again with Linux and Flash still not playing nicely/working as well as Windows yet.
Solution - Go to "about:config" and disable the two entries (set them to false):
dom.ipc.plugins.enabled.libflashplayer.so
dom.ipc.plugins.enabled.libnptest.so........
Nov 29 20:17:58 ubuntu kernel: [ 1157.180789] md: md1 stopped.
Nov 29 20:17:58 ubuntu kernel: [ 1157.180829] md0: unknown partition table
filesystem not responding/reading properly with du or rsync (this needed an fsck).
[ 2571.489217] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923106
[ 2571.942299] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923110
[ 2571.9568........
This is a "pro" feature I guess so you don't have to see the ugly GRUB screen but if you're having boot problems or trying to update/customize your system it can be frustrating.You have to do some Googling to find out that you have to hold shift to see the GRUB2 menu.
You have to hold shift before GRUB2 loads and you will see it........
From a LiveCD or if you're doing something like converting your non-RAID install to mdadm here's how you would chroot properly (you have to mount your proc, sys and dev on the running system/LiveCD to your chroot environment if you want things to work right, especially if you need to run update-initramfs due to a driver change etc..)
*replace "path" with your mount/chroot path
mount -o bind /proc /mnt/path/proc
mount -o bind /dev/ mnt/pa........
I couldn't figure out whyI couldn't install a simple package. This is what's annoying about cutting edge Debian distros, yes we know you support each license on average for 1-2 years but why take down the supporting binary packages and basically disable the older versions?
sudo apt-get install update
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find p........
I couldn't figure out why this wouldn't work, a test script in the root of my htdocs folder worked fine.
Within some subdirectories the same code would produce different base64 results but I didn't know hwy.
Archive: /tmp/archive.zip
Zip file size: 6888 bytes, number of entries: 92
error [/tmp/archive.zip]: missing 242827681 bytes in zipfile
(attempting to process anyway)
error [/tmp/archive.zip]: attempt........
After an upgrade wine wouldn't open anything, not even the pre-installed notepad.
There are no wine logs and nothing is mentioned in any standard log file about why.
I finally decided to run wine from the shell and see what's going on:
wine client error:0: version mismatch 398/402.
Your wineserver binary was not upgraded correctly,
or you have an older one somewhere in your PATH.
Or maybe the wrong wineserver is still running?........
Just install the following package "nautilus-image-converter" and you will be able to right click any image and convert the size and rotate it.
My only wish is that you could also convert the image type from say tiff to jpg etc...
This is an awesome/handy/feature and great tool to have. This is one way where GNOME/Nautilus excel, the possibilities are endless to simplify and make simple/mundane tasks quicker and more efficient than ever.........
I thought it was a GNOME problem because no matter what styles I applied Nautilus wouldn't change, but it was only Nautilus that wouldn't change/update anymore so I should have known.
The only fix/solutionI knew of other than rebooting is the following:
sudo killall nautilus
I tried closing all instances of nautilus that were visible and it had no effect.
And another thing to remember is that only will appearances/styles/themes not apply to N........
Virtually no system has a floppy disk drive anymore but you will often find your Linux distribution insists that you do or should have one :)
The solution is to remove the floppy module and prevent it from loading on the next reboot.
rmmod floppy
Centos/RHEL
echo "blacklist floppy">> /etc/modprobe.d/blacklist
Debian/Ubuntu
sudo echo "blackli........
Initializing quota ...
Error: Not enough parameters, diskinodes quota not set
vzctl set $veid --diskinodes 90000:91000 --save
New versions of OpenVZ seem to have some strange diskinodes parameter which is required.........
2010:09:09-22:22:11: The ip of this machine (xx.xx.xx.xx) does not match the ip in the license file.
Check the value of your ethernet_dev=venet0:0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifconfig
Solution
/usr/local/directadmin/scripts/getLicense.sh........
Remember to replace "eth0" with your NIC device although usually it will be eth0.
Replace 192.168.1.1 with your default gateway, remember you can also add multiple gateways by adding a second/different default gateway.
route
Kernel IP routing table
Destination Gateway Genmask&nb........
This has stumped me a few times because I keep forgetting that Centos 5.5 comes with a default iptables configuration that ends up blocking DRBD traffic,I tried all the normal things and couldn't understand why I couldn't make my normal DRBD config work. So if you have WFConnection problems and have tried the normal "mailing list" fixes, check your firewall status first!
Both Nodes Say the Following:
version: 8.3.8 (api:88/prot........
Always make a backup of the original file before trying this, I find this kind of thing when updating IPs etc.. to use a script.
Where the old IP is "192.168.5.8" and the new IP is "10.10.5.8"
sed -i s/192.168.5.8/10.10.5.8/g testdomain.org.db
The -i with sed means "inline" meaning we edit the file directly, but without the -i we could just use >and output the results to another file or do whatever else we wanted.........
Create New RAID 1 Array:
First setup your partitions (make sure they are exactly the same size)
In my example I have sda3 and sdb3 which are 500GB in size.
mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sda3 /dev/sdb3
mdadm: array /dev/md2 started.
Check Status Of The Array
*Note I already have other arrays md0 and md1.
You can see below that md2 is syn........
wget http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm
rpm -i http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm
error: Failed dependencies:
libGLU.so.1 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386
libSDL-1.2.so.0 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386
libXmu.so.6 is needed b........
Adding IP address(es): 192.168.5.8 192.168.5.9
Setting CPU units: 1000
Error: undump failed: Invalid argument
Restoring failed:
Error: iptables-restore exited with 2
Error: Most probably some iptables modules are not loaded
Error: rst_restore_net: -22
Container start failed
Stopping container ...
Container was stopped
Container is unmounted
Error: Failed to undump VE
Resuming...
vzquota : (erro........
I can't believe it comes without any sort of stats built-in and they don't make it easy to find out how to integrate it.
I downloaded the following:
wget -O /usr/bin/webalizer http://files.directadmin.com/services/es_5.3/webalizer
chmod 755 /usr/bin/webalizer
echo "action=tally&value=all" >> /usr/local/directadmin/data/task.queue........
In Ubuntu when quoting in a forum that would include a left < bracket it often appears garbled as a box with 003C inside.
Also with phpbb anything inside the "code" field appears garbled and as gibberish.
For some reason I can't find anyone else complaining about this and have not found a solution for it, but it's very annoying.........
error while loading shared libraries: libgd.so.2: cannot open shared object file: No such file or directory
Solution Install gd:
yum install gd
After that whatever you are compliing should be happy.........
This happens on some systems due to a video issue with Intel Videocards, after you see the kernel load you may see almost immediately that you get a black screen.
The following kernel parameters usually solve it:
nomodeset i915.modeset=0 xforcevesa
some people just use "nomodeset" and others use "i915.modeset=0". I think nomodeset may also do the same for each video driver so it may imply i915.modeset=0 anyway but I am not sure.........
You'll see the following and the boot process will freeze:
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
I have struggled with this issue on vari........
I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD.
Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer).
I'll........
vzmigrate --online dest-host VEIDNO
eg.:
vzmigrate --oneline 192.168.1.55 101
One option I would recommend is "--keep-dst", that way if the migration is interrupted you can still bring the VPS back up on the original host. After the migration is successful you can manually destroy it.
OpenVZ has a good writeup on this including Checkpointing and Restoring etc:........
This error is annoying, in a Virtuozzo KB entry about this ip tables nat problem they say the kernel needs to be ugpraded:
Symptoms
The node runs 2.6.18-x kernel older than 2.6.18-028stab053.10.
NAT module does not work in container, you get "can't initialize iptables table 'nat'" error:
# iptables -t nat........
For a standalone system the solution is simple, just use the same version of Windows a copy a good version of:
C:windowsSecurityDatabasesecedit.sdb from another computer.
Then you should be able to login again without getting the nasty message "Local policy does not permit you to log on interactively."
Of course you will probably need a way of accessing the filesystem off-line in order to get to it such as a Linux boot disc.
Some........
This was done on Centos butI think it's easier on Debian machines, the paths that it is set to use are tailored towards Debian, so there is some fiddling that needs to be done on Centos.
This is for chrooting ssh, but jailkit has other uses than just SSH jails but I won't cover them in this writeup.
1. Install jailkit
yum install jailkit
2. Setup Jail Home
mkdir /home/jail
chown root:root /home/ja........
This server was experiencing loads of up to 80 and maxing out the RAM and kmemsize on a CPanel VPS. There were literally dozens if not hundreds of exim processes. I have no idea why exim has such a design that would allow it to consume this much CPU and RAM. Any normal MTA should not be spawning so many processes, it should be processing them in sequence and if it is going to spawn hundreds of processes in response to a large volume of mail, it's better to have a delayed del........
Mencoder is great, you can throw anything at it, including video files from your camera and have it encode into xvid or almost any other format.
In my case I took 640x480 video from my Canon and reduced the size by 1/3 with the options below (there are many other options that you can read about in the manual but I like to keep it simple).
Mencoder Encode
mencoder -ovc xvid -oac mp3lame -xvidencopts fixed_quant=4 -o ........
catdoc.i386 : Decodes MS Word files into plain text or TeX format
I haven't figured out how to use it, it is really not clear or obvious but it should do the job if you can figure it out.
Usage:
catdoc [-vu8btawxlV] [-m number] [-s charset] [-d charset] [ -f format] files........
If you have the "(auto-read-only)" beside an arrayI have no idea why that happens but it is easy to fix.
Just run "mdadm --readwrite /dev/md1" (rename md0 to the device with the problem and it will begin to resync.
md1 : active (auto-read-only) raid1 sdb2[0] sda2[1]
19534976 blocks [2/2] [UU]
resync=PENDING
........
I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project.
Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is.
I just want to a directory that had the MP3's I wanted t........
This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason?
[655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........
This is a great way to reduce MySQL code/mistakes/annoyance when doing things, take for example this statement:
INSERT IGNORE INTO sometable(CatName) VALUES("someitem");
Notice the "IGNORE", that is what does the magic.
Normally if the entry "someitem" existed you'd get an error message back such as "Duplicate entry for whatever". What I have normally done in PHP or whatever language is manually coded or made a........
This is a great way to use your ftp server space, for example on your web hosting account (althoughI believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect. Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc..
Name
curlftpfs - mount a ftp host as a local directory
Synopsis........
*Note OS X is strange to install, I thought my HDD was not being detected by you just have to go to Diskutil and create a partition for the root filesystem and then close/move the Window and proceed with the install.
After install Mac OS X 10.4.6 Tiger I get a black screen that says:
b0 error
Most people say the partition has to be marked as "active", actually that just means marked as "bootable". Instead of t........
This is based on Debian Linux but should apply equally to any *nix distro.
Install LUKS/crypt-setup
apt-get install cryptsetup
Setup your LUKS Partition
Of course change /dev/md2 with whatever partition you intend to use LUKS on.
cryptsetup --verbose --verify-passphrase luksFormat /dev/md2
You'll be asked to verify your decryption password twice
*DO NOT FORGET THIS PASSWORD AS IT IS NOT RECOVERABLE!........
I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL.
Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you.
apt-get install rcconf
Reading package lists... Done
Building dependency tree
Reading state information... Done........
I'm using Ubuntu 8.04 but anyone using older kernels will find this may apply to them. My Intel graphics are very slow with the default Xorg settings but by using "EXA" acceleration, scrolling down windows of text becomes pretty snappy.
Just edit /etc/X11/xorg.conf
Section "Device"
Identifier "Configured Video Device"
&nb........
I was creating a RAID array and got this error: mdadm: /dev/sda1 is too small: 0K
mdadm: create aborted
Of course sda1 is not too small, both partitions sda1 and sdb1 are identical in size:
Disk /dev/sda: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Sta........
I've recently used CPanel on the admin side for the first time and have to say I hate it. Everything from the layout to the functionality screams "hackish". It just lacks so many common sense features and way of working.
I was never 100% impressed with Plesk but the basics were definitely laid out and done in a sensible manner, even though it is made by a Russian company, they definitely thought about how to make a Control Panel.
I have no idea why people........
I wasted a lot of time wondering why I could never find those packages.
Check the /etc/yum.conf file and at the bottom look for the "exclude=" line.
Below is what I found in mine
exclude=apache* httpd* mod_* mysql* MySQL* da_* *ftp* exim* sendmail* php* bind-chroot*
Just remove those entries or uncomment that line and you'll get access to the missing applications.........
skipping non-regular file "mnt/lib/udev/devices/console"
skipping non-regular file "mnt/lib/udev/devices/kmem"
skipping non-regular file "mnt/lib/udev/devices/loop0"
skipping non-regular file "mnt/lib/udev/devices/null"
skipping non-regular file "mnt/lib/udev/devices/ppp"
skipping non-regular file "mnt/lib/udev/devices/net/tu
Solution for skipping non-regular file
You need the -D........
Which one does the OS care about? blkid says the UUID is "787f1fa4-b010-4d77-a010-795b42884f56" while md insists its UUID is "4d96dd3b:deb5d555:7adb93cb:ce9182d9"
When in doubt, do we assume the OS takes the one from blkid?
/dev/md0: UUID="787f1fa4-b010-4d77-a010-795b42884f56" TYPE="ext3"
[root@localhost ~]# mdadm -D /dev/md0
/dev/md0:
Version : 0.90
&........
I have an md0 arary that my Centos install refers to. I feel this is half the reason why it won't boot anymore.
I saw the initrd for Centos was assembling it as md127 even though it was known as md0.
The reason for this is because I used mdadm --assemble --scan to detect the array on a LiveCD. I had no idea this name would stick (but now I realize the name is permanently stored in the metadata once you mount md127 or whatever random name assemble gives it). W........
The default options for iptables are very basic. Here is what you need to do in order to enable them in OpenVZ.
1.) Add the modules to iptables and restart iptables:
vi /etc/sysconfig/iptables-config
Edit the line as so:
IPTABLES_MODULES="ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp"
2.........
Partclone is a great tool that is basically like dd only it does not waste space, it doesn't take the whole partition, yet it does the same thing as dd, only with huge space/cost savings.
Clonezilla uses partclone and is more of an integrated/easy to use suite I guess you could say. I've personally only used partclone but I wish there was an easy way to mount partclone images.
I believe with Clonezilla you can do that, so I will probably give it a shot next time.........
I successfully created a single RAID 1 partition which includes /boot inside it and my root directory through the Debian installer. It said GRUB installed successfully but when I try booting the OS it seems GRUB can't read anything.
When trying to boot from GRUB
GRUB Loading stage 1.5.
GRUB loading, please wait...
Error 2
I get "Error 2" when trying to boot Debian. I also notice from a LiveCD that........
I installed 5.5 with a 300GB RAID 1 partition (boot is also on this partition). It booted up fine the first few times until after I used a Live CD and accessed the array, and it became named /dev/md127 for some reason.
Now whenI boot into CentOS I get a kernel panic and different errors, once I got "invalid superblock", even though the array is fine (it didn't happen again, probably because I was sure to dismount and stop the mdadm array properly).
Here's what........
I'm not impressed with this motherboard, I was impressed with my Gigabyte AM3 board which seems to work flawlessly.
Everyone knows that the firmware is flawed, even though I have the F6, it still seems that the system doesn't reset properly or quickly enough.
Another HUGE problem is that in most Linux kernels the NIC won't work (if you try 10 times by rebooting it might). I also notice that you need to power down for it to work.
This board does not seem very com........
It always worked fine before but no amount of power unplugging/cycling does any good. I can access one network share and that is one that I've already saved, but it can't see any workgroups.
One silly thing is why is there no option to manually connect to a netbios name or IP?
It seems there is a bug with the firmware and that the SMB client is not working properly. Hopefully it fixes itself at some point.
Between this and the lack of support for embedded s........
This function and others may not work with the stock PHPinstall on Centos/CPanel: Fatal error: Call to > undefined function imagecreatefromjpeg()
Even with libjpeg-devel installed it won't work because PHP was not compiled with jpeg support, so we have to do the dirty work ourselves :)
Here is the command/yum's I did to install missing libraries for PHP that configure will complain about (yes it is a one by one process).
yum install bzip2-........
This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel.
OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!)
# # # # # #&n........
This can be very annoying and CPanel doesn't seem to document it, or it's not found or made as obvious as it should be. It's always funny when I find it more difficult to work with a control panel than to do everytihng manually without CPanel or even Plesk.
So once again, the default serve path for contents is: /usr/local/apache/htdocs and this is especially applicable when accessing Apache by just an IP which is unbound to any domain at this point.........
It's not just as simple as running the chroot command, you need to ensure the /proc and /dev entries are passed through and populated to the chroot environment.
Step 1 - Mount Your Off-lineOS
mount /dev/sda1 /mnt
Step 2 - Mount Proc
mount -t proc none /mnt/proc
Step 3 - Mount Dev
Most guides will tell you to use this: mount -o bind /dev /mnt//dev but that doesn't work for some reason in many cases:
mount: wron........
cat /proc/user_beancounters produces the following:
kmemsize 1861537 5139870 12752512 12752512 26965041
Notice the failcnt "26965041", that is for kmemsize and at first it confused me. The system had enough guaranteed and enough burst RAM available. kmemsize is a variable indepedent of that, but who cars about the explanation right, let's just make thing........
Starting online migration of CT 300 to 192.168.5.45
Error: vzcpt module is not loaded on the source node
Error: Can't continue online migration
Error: vzcpt module is not loaded on the source node
Error: Can't continue online migration
This is a very easy fix, you just load the appropriate modules on the source and target node (althoughI don't know why the vzmigrate tool can't do that for the user on both ends):........
I took an educated guess because it kept happening at the same spot when loading the XP install. I thought it was the hard drive or motherboard.
But it turns out my heavily used but loved NEC 3500 DVD-RW drive was the culprit. After disconnecting it and swapping it for another much beloved Pioneer DVD-RW, everything has gone smoothly.
I never ran into this or many issues because I've hardly used this drive since moving it to another Desktop years ago. I actua........
This is a very simple solution, but most guides out there make you login twice (once to scp the key) and once to put the key in authorized_keys. There's no need for that.
If you don't already have a ~/.ssh/id_rsa.pub just type "ssh-keygen -t rsa" and keep hitting enter until it's done :)
Just use this code to easily enable passwordless login with SSHD
key=`cat ~/.ssh/id_rsa.pub`;ssh user@192.168.5.25 "echo $key >> ~/.ssh/auth........
I'm not a fan of Asus and won't be buying another because of having to fight Asus over a bogus warranty denial (it's a long story but they only replied about how to RMA my unit weeks later on the EXACT day the warranty expired).
Anyway, it's just a matter of hitting F9 to do this, there's no need to worry about booting from USB or CD (unless of course you want a different OS eg. Windows XP Pro, Vista/7, or a flavor of Linux or Unix). Also remember that you need to fully/properl........
CC drivers/message/fusion/mptsas.o
drivers/message/fusion/mptsas.c: In function `mptsas_port_delete':
drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function body not available
drivers/message/fusion/mptsas.c:462: sorry, unimplemented: called from here
make[3]: *** [drivers/message/fusion/mptsas.o] Error 1
make[2]: *** [drivers/message/fusion] Error 2
mak........
mdadm --assemble --scan
mdadm: /dev/md/diaghost05102010:2 has been started with 2 drives.
mdadm: /dev/md/diaghost05102010:1 has been started with 2 drives.
mdadm: /dev/md/diaghost05102010:0 has been started with 2 drives.
-bash-3.1# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] [multipath]
md125 : active raid1 sda1[0] sdb1[1]
14658185 blocks super 1.2........
This is what the /var/log/cups/error.log says after my Samsung CLP-310N decided to stop printing. This is a new printer that replaced my CLP-300 and it has been working for a day so far.
What happened is that I lifted the top part (not realizing there were rollers on it) and it stopped printing. The network activity light was flashing ,hitting the stop button didn't do anything. Even powering the printer on and off did not help.
I have restarted CUPS and SMB on the........
Not sure what rsync switches/options to use?
rsync -PDrphogtl
The short version would be:
rsync -Pha
I think these are really common sense options to use and probaby should be the default.
Explanation of rsync switches
P = display the progress
D = hybrid of --specials and --devices so all special and device files will be copied as well.
r = recursive (otherwise rsync won't copy files deeper than........
This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART.
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device........
Seagate Inventory/Firmware Check
I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate.
*Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate!
Seagate Inventory/Firm........
From the package "parted" you can use the command "partprobe" to re-read the partition table. I really hate rebooting, and that's what Iloved to hear about AHCI motherboards, that they allow hotswap so you don't have to reboot. But that's only as good as the OS, if the OS does not reload the partition table you won't be able to do anything with that new drive you attached without rebooting. Yes, even without re-reading the partiton table Linux will........
You can find it for free at http://nginx.org/ I find nginx is simpler to setup than pound (it's not hard but I found it unintuitive and annoying), it seemed to make some basic setups overly complicated with the config file syntax.
nginx on the other hand is perfectly suited in everyway, it is even simpler to setup and seems to be the most stable and most efficient any load balancer. I would go as far as to say that a good nginx setup is more relia........
Before we start I take no responsibility for this, you should have a backup and if you make a mistake during this process you could wipe out all of your data. So backup somewhere else before starting this as a precaution, or make sure it's data you could afford to lose.
The RAID 1 Setup (Hardware Wise)
I've already setup my 2 x 1TB (Seagate) drives with identical partitions, make sure your new hard drive (the empty one) is setup like your curr........
The binary "iostat" comes from the package "sysstat" and is available on all Linux/Unix like platforms.
Use the "-m" option to give you what you probably want, which is to see in MB/s how much bandwidth each disk is doing.
iostat -m
Linux 2.6.24.2 ((none)) 04/16/10
avg-cpu: %user %nice %system %iowait %steal %idle
........
I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB!
I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition.
Here is what tune2fs tol........
It's basically free bash shell script available from: http://wpkg.org/email2fax/index.php/Main_Page
Make sure you have the required tools:
libtiff
ghostscript
mpack/munpack
Where you can e-mail your Asterisk box and it will fax it to the phone number in the subject line. The good news ends there, it is fairly undocumented and buggy.
Take for example how the documentation mentions you can invoke from the com........
The folder I was trying to archive is about 72GB, but much like rsync at about 17GB it chokes because of the filesize. What's with so many common and essential Linux tools having such limitations? I guess it is likely that the authors never wrote their code with the idea that files would be so large but it's still very annoying. It's important to stay on top of these limitations on production servers because I didn't realize what happened until I checked the file with "........
The last transfer I was able to do was 16.77GB according to rsync's output and it worked fine.
16.77G 100% 10.66MB/s 0:25:00 (xfer#17484, to-check=234753/256249)
But on a file over 17GB (gigs) it stalls. Trust me, it really is stalled, it's been about 8 hours with no progression from that point for some reason.
17.24G 54% 10.65MB/s 0:22:07........
In Debian based distros:
apt-get install jabber
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
fakeroot dkms
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
jabber-common
The following NEW packag........
I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find.
yum search ftp
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirrors.netdna.com
* updates: updates.interworx.info
* addons: yum.singlehop.com
* extras: mirrors.netdna.com
rpmforge........
Proxmox has made this free utility to backup running OpenVZ containers. It's a great program which is actually just a PERL script but gets the job done. This program is not 100% required because all it really does is cp -a from your container's path as far as I know but it is still good to have uniformity to how you backup your containers.
For RPM distros such as Centos/RHEL/Fedora etc.. download and install this:
wget http://www.proxmox.com/cms_proxm........
./ntfs-3g /dev/sda1 /mnt -o force
Unexpected sectors per cluster value (127).
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
This is happening on a system I've come across an HP 6930P running Windows XP Professional. The partition appears to be very norm........
Codelite is a great choice and I intend on getting back into C++ development and I think Codelite is great being cross platform.
It looks like it was designed with a lot of thought and should do the job better. I really dislike the bloated and confusing IDE's from big companies like Microsoft where you usually have to use .NET and other useless technologies that just give Microsoft the advantage over you, the programmer, and the users.........
Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics.
# # # # # # # ##### ###### # # #### # #
# # ## # # # #&nb........
heartbeat is stopped for some reason
Anyway hnode2 was active and the services are running fine but I see heartbeat has been stopped somehow.
Here is the last log I see of heartbeat:
[quote:23c84415f5]
Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: MSG stats: 9/1762471 ms age 0 [pid16738/MST_CONTROL]
Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: cl_malloc stats: 716/51784021 152624/74519 [pid16738/MST_CONTROL]
Sep 9 17:15:32........
PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist:
[code:1:1fd0f3abbe]
if (!file_exists($OPENSSL)) {
//echo "ERROR: OPENSSL $OPENSSL not foundn";
}[/code:1:1fd0f3abbe]
I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........
HTML Create DropDown List[code:1:309976db0d]
Text To Display
[/code:1:309976db0d]........
JavaScript get valued of selected drop down l
[code:1:4be190f44a]Package = OrderForm.package.options[OrderForm.package.selectedIndex].value;[/code:1:4be190f44a]
OrderForm = Name of HTML form the SELECT is inside
package = Name of SELECT element eg.
JavaScript says form name is not defined even though it is
I've integrated this into my design and I got an error saying the Form Name i........
Javascript Get a specified element using getElementById()Great, it produces the value for whatever "id" is passed to the function.
http://www.java2s.com/Code/JavaScript/Development/GetaspecifiedelementusinggetElementById.htm
[code:1:1287ede953]
function getElement(){
var x=document.getElementById("myHead........
JavasScript how to set or write value in id tagbla
I need to set a value inside that DIV tag using Javascript, how would I do it?Doesn't work for me:
[quote:c6b5f693a5]Warning: Element referenced by ID/NAME in the global scope. Use W3C standard document.getElementById() instead.
Source File: http://hosting.com/vps-order.html
Line: 19[/quote:c6b5f693a5]
[code:1:c6b5f693a5]........
GRUB Boot FreeBSD[code:1:a7050277b7]title FreeBSD 6.0
root (hd0,2,a)
kernel /boot/loader[/code:1:a7050277b7]
Just insert the above code into GRUB's [b:a7050277b7]menu.lst[/b:a7050277b7] and make sure you set the root path correctly.
[quote:a7050277b7]Let's quickly explain what the root (hd0,2,a) means:
*hd0 stands for the primary master drive
*2 stands for partition 3
*a stands for the........
Mount Linux ext2 file systemNormally in Linux you could mount ext2 or ext3 etc... like this:
mount -t ext2 /dev/hda1 /mnt/hda1/
In FreeBSD the difference is of course the disk naming conventions (hda1 would be known a /dev/ad0s1):
To mount ext2 in FreeBSD just type:
mount -t ext2[b:68c16c60bf]fs[/b:68c16c60bf] /dev/ad0s1 /mnt/ad0s1........
Asterisk FreeBSD compile problemsI couldn't get it to compile without using the following options at compile time:
[b:b7d672ee28]
make install WITHOUT_ZAPTEL=YES WITHOUT_MYSQL=YES WITHOUT_FAX=YES WITHOUT_ODBC=YES WITHOUT_H323=YES[/b:b7d672ee28]Some problems you might have with copying over your Linux config files to FreeBSD is different paths.
[b:f044931f41]For example the etc path for Asterisk on BSD will now be:[/b:f044931f41]
[qu........
Photoshop Center A SelectionYou should have the item in it's own layer, select the layer and use CTRL+A to select the layer.
Then look for the alignment controls near the top of the screen (under the menus)
Use the Horizontal Center and Vertical Center and then your item will be perfectly centered.........
CentOS (most Linux) no-RAID to software RAID-1 guidehttp://lists.centos.org/pipermail/centos/2006-January/018624.html........
Nice General Linux RAID 1 GuideFull examples/tutorials that should work for any Linux system using GRUB or LILO as the boot loader.
This is the only tutorial I've seen that clearly shows how you can convert an existing non-RAID system to software RAID1 remotely, without ever having to be at the computer. This is important for people who co-locate or rent dedicated servers that they may not have physical access to in a timely manner.
https://alioth.debia........
Live E-mail VerficationTwo very cool tutorials that actually connect to the supposed mail server of whatever address the user specifies to see if the e-mail address actually exists.
http://www.devshed.com/c/a/PHP/Email-Address-Verification-with-PHP/
http://www.zend.com/zend/spotlight/ev12apr.php?article=ev12apr&kind=sl&id=1782&open=1&anc=0&view=1#notes........
Centos 4.3 x64 & VMWare Server Beta[code:1:6d0b2c8c2f]
The correct version of one or more libraries needed to run VMware Server may be
missing. This is the output of ldd /usr/bin/vmware:
linux-gate.so.1 => (0xffffe000)
libm.so.6 => /lib/tls/libm.so.6 (0xf7fbd000)
libdl.so.2 => /lib/libdl.so.2 (0xf7fb9000)
libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fa7000)
libX11.so.6 => not f........
Setup Static IP Address ONBOOTAssuming you are using eth0
Note this will work for any version of CentOS and basically any version of Redhat Linux or Redhat based distribution.
You would need to create a new file
[code:1:02f8d34c30] /etc/sysconfig/network-scripts/ifcfg-eth0:0[/code:1:02f8d34c30]
DEVICE=eth0:0
the ":0" at the end specifies alias 0 we could actually change this to ":99" or "........
Updated to Version 3.8 and can't loginSSHD accepts my password but then hangs at "Last login: Wed Sep 13 21:30:02 2006 from"
This occurred during a yum update after upgrading my release, installing the new kernel and rebooting.
I got kicked out of sshd after seeing the following during yum update:
telnet 100 % done 85/476
tux 100 % done 86/476
ntsysv 100 % done 87/476
rpmdb-redhat 94 % done 88/476........
Telus + 2Wire 2700 Router HorribleWell first of all let me say this is the only router/switch that sometimes seems to crash/disconnect computers on the local network.
This device also thought it would be smart to block VOIP packets coming from my Sipura ATA VOIP adapters so I disabled the [quote:cb89ba7bff]"Invalid TCP Flag Attacks (NULL/XMAS/Other)"[/quote:cb89ba7bff] option
Then all of a sudden I couldn't get onto any web pages, the wireless........
/usr/bin/ld: cannot open crt1.o: No such file or directory[quote:812bec9db7]/usr/bin/ld: cannot open crt1.o: No such file or directory
collect2: ld returned 1 exit status[/quote:812bec9db7]
This is annoying and in my case it happened on Centos AMD 64 when compiling a 32bit program with GCC.
Install glibc-devel.i386 (make sure you get the i386 version and not the native 64 bit version which is likely already installed).
The joys of 3........
Roxio Easy Media Creator "Could not complete last comma[b:2e4e25672a]"Could not complete the last command because: Unknown error"[/b:2e4e25672a]
When I try to burn an .iso image by double clicking it and allowing Roxio to open up "Disc Copier" I get a bunch of those messages.
It's annoying and not really awe inspiring!........
Roxio/Sonic complaints - No verification of burnt ISO ImageThe only thing Nero does better is that it has the option to verify the data written from an ISO/CD Image!
Why can't all burning utilities have this feature?........
Updating yum repos for DAG /etc/yum.repos.dIn /etc/yum.repos.d
[quote:96456b2ab9]Create any file such as "CentOS-Dag.repo" in /etc/yum.repos.d[/quote:96456b2ab9]
Add the following to the above file:
[code:1:96456b2ab9]
[dag]
name=Dag RPM Repository For Red Hat Enterprise Linux
baseurl=http://dag.atrpms.net/redhat/el$releasever/en/$basearch/dag/
http://dag.freshrpms.net/redhat/e........
SSH Public Key Authentication (Login Without Passwords)I've gone over this before but just a quick note!
the "authorized_keys" file in ~/.ssh
must be chmodded to "600" or public key authentication won't work.
I guess it's kind of a security/failsafe feature that I've
seen on all Linux and Unix OS's........
Linux Unix Xorg X Server Intel Extreme i810 Graphics Problem(EE) I810(0): No Video BIOS modes for chosen depth.
(EE) Screen(s) found, but none have a usable configuration.
I have a new Dell PC with one of the latest Intel Extreme Graphics on-board crap. From what I can see any Linux/Unix/FreeBSD versions running XFree86 or Xorg from years ago or the latest version today will have this problem.
It's easily corrected FOR MOST people. Go into your........
Xorg fonts missing Xorg.0.logThis happened on a PCBSD installation but it could happen on any Unix/Linux Xorg installation:
If the text on your screen is too small and you're running at a high resolution if you do a
[code:1:04ca0d3455]cat /var/log/Xorg.0.log | more
[/code:1:04ca0d3455]
You'll see a bunch of fonts missing, specifically the 75dpi and 100dpi ones that you really need :)
(WW) The directory "/usr/X11........
How to compile in Windows/DOSMingW is a free compiler project so start here:
http://www.mingw.org/download.shtml#hdr2
I downloaded the core GCC compiler:
http://prdownloads.sf.net/mingw/gcc-core-3.4.2-20040916-1.tar.gz?download
But it's missing even the standard C runtime libraries like "stdio.h"!
You may also need to add environment variables from the DOS command line.
Here is a simpl........
Good Linux Security Tutorialhttp://www.freeos.com/articles/2829/2/13/........
DVD Burners and Media at an all time lowThis is crazy you can buy a nice Pioneer DVD burner for like $64 CAD now and good media like 50PC Maxell is just $25.97 at Walmart.
I'm liking this. Time to make double archives of important data :)........
Quick Tutorial On Starting A Web Site[b:3cef3c01b6]Step 1.[/b:3cef3c01b6] Purchase a Domain Name (eg. yoursite.com)
[b:3cef3c01b6]Step 2.[/b:3cef3c01b6] Design your site using a program such as Microsoft Frontpage or Macromedia Dreamweaver. If you are unable or unfamiliar with doing this you may want to hire a company to create your site (many of them will handle each aspect of setting up your site).
[b:3cef3c01b6]Step 3.[/b:3cef3c01b6] Host your site........
E-Mail TipI just thought I'd give you guys a good tip about e-mail. It seems a lot of people like to use a Hotmail or ISP (eg. Telus) account for their e-mail but the problem is what happens if you switch ISPs, then your e-mail address no longer works and old friends might not be able to contact you. The same thing has happened for excite.com e-mail addresses where they just shut down.
Whether you are a business owner or personal user can you afford to lose an e-mail........
Vonage & Linksys Offer Trade-In ProgramVonage & Linksys Offer Trade-In Program
Monday, June 13 @ 09:22:36 PDT
Vonage is offering customers a way to get a free 802.11g router when they turn in their old one.
advertising
For a limited time, customers can trade-in their used router any brand, any model for a Linksys Wireless-G Router with 2 Phone Jacks for broadband telephony (WRTP54G) for free (after rebates), when they si........
The New Chips on the BlockThe New Chips on the Block
By Bruce Gain
Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html
02:00 AM Jun. 13, 2005 PT
We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........
Intel's Finnish FetishIntel's Finnish Fetish
By Dave Mock
June 13, 2005
Chipmaker Intel (NASDAQ: INTC) has successfully topped the personal computer market for decades. Breaking into related areas such as communications has been much difficult for the world's largest semiconductor maker. But a new partnership with Nokia (NYSE: NOK) could help to change that.
Intel's forays into cellular-phone and home-entertaiment-device chips have........
Intruder detection device uses behavioural analysisIntruder detection device uses behavioural analysis
by Antony Savvas
Monday 13 June 2005
Symantec is introducing a new intrusion detection product that uses behavioural analysis to block potential attacks on enterprise networks.
The new Critical System Protection 4.5 system uses technology that Symantec acquired through last years purchase of Platform Logic. It is designed to protect deskt........
Become your own ISP!http://waverider.com/
I would link to the exact product I am mentioning but it's under Products/5.8Ghz because I can't find the exact URL because of their annoying javascript and frames (you'll see what I mean).
The exciting thing is that this unit can supposedly be up to 72mbit, it is NOT line of sight and the range is up to 20miles. I wonder how real world speeds and range would actually be and if it is reliable.
I j........
Canada Net SpeedWhat is the fastest internet I can get in Canada?A lot of ISPs offer 10mbit cable such as Cogeco or some other one in Halifax I think. I can't remember the name.
Right now cable internet will offer the fastest.........
FreeBSD Mirror Siteshttp://mirrorlist.freebsd.org/FBSDsites.php........
FreeBSD Desktop OSsI would probably choose these over Linux.
In many ways these are probably more stable and just as easy to use as any Linux distros but the benefit of stable, updated and secure packages!
PC-BSD - http://www.pcbsd.org
DesktopBSD - http://www.desktopbsd.net/index.php?id=37
Personally PC-BSD is Beta at this point and is not easy if you are installing it on a non-primary partition.
I have not used Deskt........
MySQL Reserved Wordshttp://dev.mysql.com/doc/mysql/en/reserved-words.html
You should familiarize yourself with these because you will have unexpected results if you use any of them.
Eg. try creating a table with what you think is valid syntax like this:
CREATE Table Order(
.......);
The word 'Order' is a reserved word and used to ORDER the results so you will get a syntax error from this one and you would think everything is........
Mounting NTFS in UnixJust a quick tutorial to mount your NTFS volumes in Unix (FreeBSD/Linux)
[quote:4a9de7bf80]mount -t ntfs -o umask=0 /dev/your_partition /mnt/your_mount_point[/quote:4a9de7bf80]
[b:4a9de7bf80]-o umask=0[/b:4a9de7bf80] is to ensure all users can access the mounted partition (otherwise don't use it and only root can access the mounted partition)
[b:4a9de7bf80]-t ntfs[/b:4a9de7bf80] is simple because it just lets mount kno........
PHP imagecreate() not found but compiled with GDHere is what I get:
[code:1:be41bc7717]
Fatal error: Call to undefined function: imagejpeg() in image.php on line 56
[/code:1:be41bc7717]
I am positive it is compiled with GD so I don't get the errorI need to install the linux-jpeg package
then
I need to recompil........
PHPBB Drop All TablesSQL Syntax:
[quote:75acd496c1]drop table phpbb_auth_access, phpbb_banlist, phpbb_categories, phpbb_config, phpbb_confirm, phpbb_disallow, phpbb_forum_prune, phpbb_forums, phpbb_groups, phpbb_posts, phpbb_posts_text, phpbb_privmsgs, phpbb_privmsgs_text, phpbb_ranks, phpbb_search_results, phpbb_search_wordlist, phpbb_search_wordmatch, phpbb_sessions, phpbb_smilies, phpbb_themes, phpbb_themes_name, phpbb_topics, phpbb_topics_watch, phpbb_user_group, p........
Helpful IPFW ExamplesSomeone's real life examples:
http://lists.freebsd.org/pipermail/freebsd-security/2004-July/002181.html
Or you can try the FreeBSD Handbook guide:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/firewalls-ipfw.html........
Create Table with structure of another existing tableOk, this has many valid uses such as if you need to create backups or the ability to undo changes, you would want to create new tables with the same structure as another. Here is how you do it.
[i:7ed9581493]
Also remember Indexes such as PRIMARY KEYS [b:7ed9581493]will not be preserved[/b:7ed9581493] so you will have to readd them manually.[/i:7ed9581493]
[code:1:7ed9581493]CREATE TABLE NewName AS SEL........
Chat MSN/ICQ/Yahoo etc.. ClientsText-Based:
MSN - pebrot, tmsnc, ccmsn
ICQ - centericq........
Bash Script Infohttp://www.faqs.org/docs/Linux-HOWTO/Bash-Prog-Intro-HOWTO.html#ss10.5
http://www.scit.wlv.ac.uk/~jphb/spos/notes/shell/shell5.html
http://quong.best.vwh.net/shellin20/#LtohTOCentry-41
http://www.cactus.org/~dak/shellscript.html
http://db.ilug-bom.org.in/Documentation/abs-guide/
http://pegasus.rutgers.edu/~elflord/unix/bash-tute.html
http://heather.cs.ucdavis.edu/~matloff/UnixAndC/Unix/CShellII.html
Since bash i........
sed is great for pattern matching or retrieving linesHere is a cool example
Say you type df:
The output would be something like:
[quote:3bb8d51437]Filesystem 1k-blocks Used Available Use% Mounted on
/dev/hda2 1712432 1206664 418780 75% /
/dev/hda1 31201 10505 19085 36% /boot
none 30932 0 30932 0% /dev/shm
[/quote:3bb8d51........
Package managementIf you're like me and often like using an older version you'll need to know this.
Since all 5.x versions no longer have packages of their own you'll have to use the 5-stable
The best way is to set the [b:d5e8972240]packagesite environment variable[/b:d5e8972240] like so in your [b:d5e8972240].profile [/b:d5e8972240]file
[quote:d5e8972240]vi /etc/.profile[/quote:d5e8972240]
Add this:
[code:1:d5e897224........
CVSUp the Easy WayIf you're reading this you probably have never used CVSUp or don't know how.
CVSUp can be used for two things or just one if you prefer.
*Keeping your kernel up to date
*Keeping your port list up to date
Start by editing the following file in:
[b:76928b387d]vi /usr/share/examples/cvsup/cvs-upfile[/b:76928b387d]
It can be quite overwhelming with all the crazy options.
Basically there are only 3........
Norton Antivirus is the worst - who would have known?http://www.software-antivirus.com/
Check the link above, that review site lists Norton as one of the ones to stay away from. With good reason too, I always wondered why Norton seemed to miss so many viruses, spyware and such. Even when it didn't, it was absolutely useless because it was either unable to delete the file and it was never able to repair or disinfect.
So in essence, from my experience, N........
It's not all about the speed.I'd also thought I'd mention that speed is not everything. Routing is the key, because if one router you hit is slow then it doesn't matter how fast your connection is. I have found that locally, Telus has much better routing than Shaw (although I have not yet tested their new DOCSIS network).
There are also some countries such as Sweden that offer high speed connections, but the high speed only applies locally. The reason is that man........
Link Exchanges- Friendly AdviceI just wanted to make aware to the public who are paying to use Link Exchanges to get heavier traffic online and boosting their page rank in Google. Please be advised that this type of 'exchange' can very well get you booted off of Google and blacklisted by them! It's happened to many people and it's a very important tip. If you are on a Link Exchange, and have not been booted off yet; you MAY. Google is very smart and eventually they catch on. ;) Be ca........
Use Mozilla Firefox, not Internet Explorer - You'll be glad!Hey guys,
I just thought I'd recommend that everyone switch to Mozilla Firefox as their web browser. You can find it at http://mozilla.org
It is free and it is much better than IE. It has a built-in popup blocker which works great and most importantly, it doesn't have a million critical security flaws which could compromise your security such as passwords for on-line banking etc..........
NEC ND-3500A is great!I just picked up an NEC 3500A a few weeks ago and I love it.
It is a great all in-one optical drive solution.
It can burn DVD/+R-R at up 16x, read at 16x and rewrite at 4x and CD-R at up to 48x!
Not bad, but the impotant part is that it delivers consistent high quality burns and the drive is as quiet as I could ask it to be.
It's also convenient that it has a lot of hacked firmware for overspeeding of........
Basic Port ListingHopefully someone finds this useful or at least interesting.
http://www.sans.org/top20/#u9
Name Port Protocol Description
Small services ........
Linux Security Mini-tutorialThis site has a good tutorial to get you started on securing your Linux system. Although I'm sure all of our systems are already 100% secure :lol:
http://www.yolinux.com/TUTORIALS/LinuxTutorialInternetSecurity.html........
My list of handy security links - Ongoing[b:6f8d25be68][size=18:6f8d25be68]News[/size:6f8d25be68][/b:6f8d25be68]
Security Focus http://www.securityfocus.net - Nice Security News Site
CERT http://www.cert.org/
Common Criteria (see if your OS/software is EAL4 certified) EAL(Evaluation Assurance Levels is the industry standard for evaluation of security in software) http://www.commoncriteria.com
[size=18:6f8d25be68][b:6f8d25be68]Tools[........
Other Security Web SitesSeveral websites actively track security issues. This list provides you with the major providers
of security information on the Web. Many of these organizations also provide newsletters and
mailings to announce changes or security threats:
Center for Education and Research in Information Assurance and Security (CERIAS)
CERIAS is an industry-sponsored center at Purdue University that is focused on technology and
relate........
Clustering LinksI thought this might be interesting for people with spare time.
[b:6423c19973]Great clustering article from Linux Mag[/b:6423c19973]
http://www.linux-mag.com/2003-11/clusters_01.html
[b:6423c19973]General Linux cluster information[/b:6423c19973]
http://www.gdargaud.net/Hack/ClusterNotes.html#HighA
http://www.faqs.org/docs/Linux-HOWTO/Cluster-HOWTO.html#s3
http://www.yolinux.com/TUTORIALS/LinuxClustersAndFileSys........
Load Balancing/ClusteringAn interesting article that discusses the pros, cons and viability of load balancing/clustering
http://www.wwwcoder.com/main/parentid/493/site/4189/68/default.aspx
ZoneEdit seems to offer an interesting Fail Over Service as well:
http://www.zoneedit.com/doc/faq.html#fo........
Telus Begins Enforcing Bandwidth CapsIt appears Telus has begun to send e-mails out and is planning on enforcing bandwidth caps of only 10gigs/month for their 1.5mbit plan and 20gigs/month for 2.5mbit
The state of Canadian ISPs is horrible :(
In the east coast, Bell Sympatico will allow you to have unlimited bandwidth and even Aliant will and they have 3mbit for a much more affordable price than our 2.5mbit on Telus.
Telus needs to get wit........
I played around with xmit power (how much power in mW) to see if I could increase the range and signal strength. Idon't think this Linksys WRT54G's strength is the wireless, it seems to have poor signal quality and transfer rates all around.
Ithink part of the problem is also that there are several wireless networks around my house that could be interfering and the walls are thick here.
Anyaway, moving on now :) The default is 28mW and I increased it to........
gnuCash is available for all main platforms, Linux/Unix, MacOS (FreeBSD anyway), and Windows.
You can download gnuCash free from here.
It does seem to be fairly full featured and somewhat straight forward, but like so many programs it is missing a few key features or things don't work quite right.
It doesn't support importation of CSV files, which is a big minus. And the developers rather than wanting to add support have just dec........
*This is a bug with initramfs support, all kernels after around 2.6.27.54 suffer from this problem.
If you try to include initramfs into your kernel (I mean actually building your binaries into the kernel) this will always happen. Obviously some code has changed in recent kernels that is present in all new kernels, it makes it impossible to boot
I've tried the latest 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36, 2.6.37, 2.6.38 kernels and they all do this. I found one bug re........
Linux Kernel v2.6.30.3
102220 blocks
CHK include/linux/version.h
CHK include/linux/utsrelease.h
SYMLINK include/asm -> include/asm-x86
CALL scripts/checksyscalls.sh
CHK include/linux/compile.h
CC drivers/net/igb/igb_main.o
drivers/net/igb/igb_main.c: In function `igb_up':........
I have played around with Pound a little bit. It is a reverse proxy and load balancer in one, and it can be used as only a reverse proxy if you like. It is very simple to configure as either, and Pound even senses if one of the systems is down and stops sending requests to the dead server.
It supports SSL (but passes the request to the destination server unencrypted) and even the Apache log format. Pound is very simple, fast a........
The "Geoip" package is available on virtually all Linux and Unix like systems and is very handy in looking an IP address' corresponding country.
The homepage of the maintainers is here.
They also have a package called "Geocity" which can be downloaded from their site, it is still free and gives you a close indication of the city the visitor is from. You can........
This is a very weird, annoying and bizarre quirk with many distributions, especially Debian. The home and end keys don't work, but it's a simple fix as long as you found this article :)
You just have to edit /etc/inputrc:
Find the commented lines as shown below:
# "e[1~": beginning-of-line
# "e[4~": end-of-line
*If you can't find the above, just copy and paste the code below into your inputrc, it will en........
RemoveHandler .html .htmAddType application/x-httpd-php .php .htm .html Just add the above into the .htaccess file for your website. Also remember that you need to be allowed to override the Apache and this should go into the vhost for your site as shown below:
# you need the AllowOverride otherwise .htaccess directives will be ignoredOptions FollowSymLinksAllowO........
Shortcut/Easiest Way To Create A Self-Signed Key:
openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key
Using the above, you instantly create a self-signed certificate valid for 1530 days and you can simply skip to step #5.) below.
If You Need a Real SSLCertificate (eg. Equifax/Openssl) then you need to create a CSR request (you'll need to follow Steps 1.) and 2.) in order to create the CSR. You then upload the CSR Certi........
This happened with a select statement which writes the result to an external file. I didn't remember the privilege "FILE" must be granted on *.* for this to work successfully, it wasn't actually an authentication issue as it implies since I was already in the SQL prompt and doing the query.
SELECT some_id
FROM sometable
INTO OUTFILE '/tmp/result.txt'........
top - 09:34:12 up 2 days, 20:57, 2 users, load average: 1.83, 1.99, 2.03
Tasks: 59 total, 2 running, 57 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.3%us, 0.0%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st
That 99.7% wa is iowait, it means the server is waiting for a process to complete an IOoperation or in plain English, there is a delay in........
100215 07:02:24 mysqld started
/usr/libexec/mysqld: Can't read dir of '/tmp/' (Errcode: 13)
/usr/libexec/mysqld: Can't create/write to file '/tmp/ibyP1qUC' (Errcode: 13)
100215 7:02:24 InnoDB: Error: unable to create temporary file; errno: 13
100215 7:02:24 [ERROR] Can't init databases
100215 7:02:24 [ERROR] Aborting
100215 7:02:24 [Note] /usr/libexec/mysqld: Shutdown complete
100215 07:02:........
I wanted to disable the "Administrator" account for security purposes and Iread some "guide" on the internet that recommended that we run "C:WindowsSystem32sysprepsysprep.exe /generalize". I also clicked the option for "Generalize" and the computer rebooted and gave some OOBE error and restarted, and now I get the error above no matter what.
I read that some drivers such as ones from AVIRA AV can cause this because they're unsign........
I didn't find any useful information that actually fixed this. My VPS was in the "Running State" and I could not stop or restart it. I kept getting "Container already locked" no matter what Idid (I tried all the suggestions in the Google results for this error).
Most of the suggestions were for Windows but I only use Linux. The other solutioins also said to restart the VZ service or even the entire hostnode and this was not acceptable to me........
This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far:
You can purchase an "M-Zone" China Mobile pre-paid SIMCard from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all. At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........
Everyone says there is a "manual" way of doing it and then they tell you to use iTunes, but if you're like me, you're travelling on business in a foreign country and your laptop does not have iTunes and you don't have a way of getting it and/or don't want it.
For this example I'm using the provider "du" in Dubai, UAE (United Arab Emirates) but this method works for virtually all providers.
The requirements in this case to truly "manually update........
It's a bit of a pain that many basic third party tools that aren't put of the main Centos/RHEL repositories are not available unless you compile them or install the RPMForge Repo.
*Updated 08/29 with new download location changed from apt.sw.be to rpmforge.sw.be
Here's a quick, simple/cut&paste way to do it:
wget http://rpmforge.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.i386.rpm
rpm -i rpmforge........
This is something that happens a lot and it is very dirty, as you probably know each site is hosted on a certain IP address. Sometimes a domain is hosted by a single IP address and the IP address defaults to this very same domain.
This means that if someone buys domain abcd.com and enters your IP address (the one of your website) as the A record, your content will show up on their domain as if it was their own.
There is an easy way to prevent this by using .htacces........
There is a nice mode that Samba supports which you can add to smb.conf
create mode=555
This way users can create and write files/directories without deleting (except I believe dirs can be deleted but only if there are no files inside).
It's too bad that Linux does not have built-in "write"/"delete" privileges and is something that even Windows 98 can trump.........
I bought a Dynatron A46G for my AMD X4 620 AM3 Quad Core CPU. Just judging by touch, the stock OEM fan/heatsink combo kept things so cool, I could leave the 1U server on the floor and it barely felt warm to the touch, including the heatsink itself.
I thought the Dynatron A46G would be enough with passive cooling (it has no fan), but the same setup became burning hot on the underside of the server and also by touching the heatsink itself within minutes.
I thought that th........
You can see the problem below, GRUB recognizes my hard drive and sees the partitions but cannot access them. This is from the GRUB boot disc I'm using.
What happened is that I had some power issues causing this system's power to be interrupted several times and basically an on/off on/off situation.
The system won't boot, I just get a flashing cursor and no message or error from GRUB. Obviously the problem is that my MBR seems corrupt or some other issue.
My........
The results are still not flattering and are nothing close to native performance. Unless GlusterFS has a "DRBD-like" option to delay writes over the network and to only read from the client side, I don't see how performance can ever improve much more.
After doing some client optimizations Iadded more to the score:
Start Benchmark Run: Sun Nov 29 00:37:44 PST 2009
00:37:44 up 3 min, 1 user, load average: 0.01........
I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems.
DRBD
I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........
You might remember my original GluserFS/OpenVZ benchmark which produced a horrible 29.8
This is the exact same system, but using the latest 2.0.8 (with some small files patch which speeds up performance) you can see it is about 25% faster.
I also haven't tuned my config files at all, but there are some settings that should increase performance on small files which I believe i........
Loaded plugins: fastestmirror
rpmdb: mmap: No such device
error: db4 error(19) from dbenv->open: No such device
error: cannot open Packages index using db3 - No such device (19)
error: cannot open Packages database in /var/lib/rpm
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py&qu........
Inever saved any of the logs, but basically no matter what OS (Linux)I used, I could not get my 1000GB hard drive to work (Seagate SATA). The BIOS recognizes the drive and fdisk -l shows the hard drive as it should.
The tricky thing is that different OS's will give you different results, but don't be fooled. You can't use these larger drives for long. Iwas getting all kinds of seek/IOerrors and also messages that the port could not be read.........
This is very disappointing since GlusterFS markets itself as a solution to deploy VPS servers on. On the HNitself I get a Unixbench of about 360.
I'm also using an SSH tunnel to secure the communications, but even before that, things seemed very slow.
# # # # # # # #####&n........
In those 4 simple commands you can setup mutual key exchange between two sshservers by using a single login shell session and single window.
*Just change the IP address examples of (10.10.0.2) to the target of your mutual key exchange. It doesn't matter if the server is on a LANor WAN(well unless the server is behind a firewall and you cannot SSHinto it).........
Iwas getting really annoyed with this, I used full quotes around the filename and vi, cat, less all thought I was trying to pass the dash in the filename as an argument.
I didn't realize that all you have to do is just put a dash dash "--"in front.
Here's an example:cat -- "-etc-glusterfs-glusterfsd.vol.log"
Without the -- you get: cat: invalid option -- c
Try `cat --help' for more information.
Ih........
Have you ever seen this dreaded message in your Apache/HTTPD /var/log/httpd/error_log?
[error] server reached MaxClients setting, consider raising the MaxClients setting
The error itself is slightly misleading. Ibelieve this happened to one of my servers, I found Apache was running still, and that you could telnet to port 80 but no respnose would be given.
For some reason my error log initially did not have the above error, but after a restart I saw........
This way should work on all Linux machines, at least RHEL/Debian (Ubuntu) based distros but most likely all and also should work on many Unix style machines I believe.
Many OS's have tools to update the timezone, but most of them (even if command line) require several bloated packages and even Xorg/KDE based packages etc..
Your time zone info file is actually in /etc/localtime if you open this file in vi/vim/pico you'll see it's gibberish (binary code or another encodin........
For some reason Ikeep getting this error when trying to run a sudo command eg:
sudo -u someuser somecommand
sudo: Error dropping capabilities, aborting
My version of sudo is:sudo-1.6.9p17-3.el5_3.1 and I've heard that version 1.7 fixes everything. The only thing is yum does not think sudo has any update. Iguess the new version has not been committed to the RPM repository yet.
This is really a huge and ann........
A VPS Server I had just wasn't working right, code that I migrated there just wasn't working. For example, it kept telling me the connection to the database was unsuccessful, halfway through iterating through results it already had.
Then I realized it wasn't my code. Ichecked my /proc/user_beancounters and found this:
cat /proc/user_beancounters
Version: 2.5
uid resource held maxheld barrier limit failcnt........
It's actually very simple and "grep" makes it as easy as possible. I'll outline a few common scenarios and provide some examples.
Say you want to search ALLfiles within the current directory (and inside/deeper) for the text "phpinfo()"
grep -R "phpinfo()" *
If you want to search only certain files such as only .txt you would do this instead:
grep -R "phpinfo()" *.txt
As you ca........
Backing MySQL Databases
Backing Up/Dumping All Mysql Databases To A Single File
mysqldump --all-databases -u admin -p > allmysqldatabases.sql
The "-all-databases" clause is pretty obvious isn't it? It means that it will backup all databases.
The "-u admin" means login using the user "admin", if you h........
I was getting very frustrated one day wondering why it appeared my .htaccess file was being ignored and not processed by Apache. No matter what I did it was obvious that Apache didn't care about my .htaccess file. Then I realized that the default settings must be in effect, which is that my vhost didn't explicitly allow me to override the default settings.
This usually comes down to your vhost settings. Make sure you have an entry like this in your Apache vhost settings in........
This is something that annoys a lot of people, fortunately the Redhat style OS's are the most simple in this respect. I disagree that Debian's way makes sense, it is more of a hackish approach in how they implement iptables.
Anyway, for those who are using Redhat/Centos style OS's it is very simple.
Set your rules from the shell/command prompt and to save the iptables firewall rules so they are remember/loaded on boot just run this command:
service iptables........
There is a tool called "xml2" which will parse both HTML and XML scripts, this is very useful to do a mass extraction or conversion of data based on say an HTML table etc..
It becomes even more powerful using bash if certain tags are identified with a certain class="" attribute or something else unique to only the tags you want.
Happy parsing.........
Here is an example that I recently found, most PR checkers will say this domain is PR8 or will say "cannot analyze PR".
The example is domain "bonserotica.com" view Google's cache of the homepage and you'll see as in the picture below, it lists a different URL, which means they used a redirect to a high PR site to fool you and the PR checkers.........
This is pretty bad, ever since my phone has been unlocked the battery life is horrible. Many others have reported this issue on provider unlocked phones and even jail broken phones. We're talking issues as bad as losing 1% every 3 minutes which is what I seem to have observed as well.
For now I'm going to relock the phone, and hopefully a firmware update will address this issue. This is very annoying and it seems apparent this is also happening on 3G phones and that........
Has Apple tried to give a golden egg to the cell phone companies? Has anyone noticed that if you set your lock time to x minutes, the phone doesn't just lock, it goes into standby. When it does this, any WiFi connection you have gets dropped and all push/data functions such as e-mail checking are done through the 3G network.
There is no way to change this feature and functionality and it's very annoying, especially if you are downloading something or loading files over the........
First of all, the iPhone is crippled in many ways, but most of my complaints about functionality have been addressed through the jailbreak, Ican run apps in the background of my choosing, I can install a terminal, acccess my phone through SSH and SCP and so much more.
It even addresses the 15 minute e-mail problem, I installed a program called "PushMod" and now set the checking time to just 1 minute.
Apple should really thank the developers for this gift, it ma........
Apple crippled the iPhone by not allowing multi-tasking of the non-primary apps. I use SSH a lot and I don't want to close my session just to check my e-mail, etc, now an app found in Cydia called "Backgrounder" allows just that.
Although it's not perfect, we installed the correct one for "3.x" iPhones and hit "Reload SpringBoard" and the hour/circle glass has just been going for minutes.
It seems like it installed fine even with the crash t........
This happened during a sync of my iPhone while installing some apps. This usually happens to non-jailbroken iPhones who are trying to install non-Apple approved software OR jailbroken phones who haven't done the "Sync update".
How to fix this error and get the Sync Update
Open Cydia - Manage - Sources - Edit
Add this source: http://cydia.hackulo.us
Then under the section "Hackulo.us" install "Ap........
Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore.
A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly.
In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........
Yes, Iadmit I finally got bitten by the hype as much as I can usually see through it all. Keep in mind this review is of the "stock" phone, no jailbreaking yet which is what really unleashes the customizability and whyI bought iPhone.
I had better things to say about this phone before buying it, and it is a great phone, perhaps the best on the market by far, if not because of the Mac OS port onto the iPhone and all the apps, etc, etc.
With that said........
I kind of expected this feature to be there in some form, to stay ahead of the pack Apple needs to stay on top of this. User's of HTC's Android smart phone which uses a Linux based OS with Google's power behind it, note that you can save passwords in the browser on that phone.
Apple needs to continuously evaluate the needs in its core apps and make sure the features are cutting edge and top notch, if other phones come out with some of these seemingly small but essential features........
This is unfortunate and frustrating as many sites use it, a lot of people are frustrated that TinyMCE does not work on the iPhone Safari browser.
Apparently the developer of TinyMCE's answer is "talk to Apple about it"
It's really frustrating although, I wonder if any other mobile phones are able to use TinyMCE or not, whatever the case is it would be nice to find a solution to use TinyMCE on the........
Iused to get all kinds of weird annoying characters like "" during compilation with gcc especially.
example:
dmg2img.c:456: error: BZ_OK undeclared (first use in this function)
dmg2img.c:471: warning: implicit declaration of function BZ2_bzCompressEnd
dmg2img.c:482: warning: implicit declaration of function BZ2_bzDecompress
dmg2img.c:484: error: BZ_PARAM_ERROR undecl........
The dmg format is silly and annoying to work with, why couldn't Apple stick with the .iso standard? Anyway, there's an excellent Linux and Windows based tool to convert it back to a normal .iso Image called dmg2iso
I'll only cover theLinux version although the Windows pre-built binary works the same way.
Download dmg2iso here for free (from the author's website)
It's just silly and doesn't make sense that Ubuntu doe........
As much of a computer nerd as Iam, I'm usually a late adopter to technology for a few reasons. Ifeel most new hyped technologies and electronics are mainly fads, and I'm also cheap.
Adopting later means you avoid the bugs, kinks and most importantly pay the lowest price, that's me being cheap again :)
I never read much about the iPhone but Isaw all the hype around it and until recently I wasn't a big fan of anything Apple until a few years ago I realize........
I've had an old Blackberry for a few years and I was ready to spend some serious cash on a nice Nokia. I love the idea of the Linux based Symbian S60 OS, so I was looking at phones like the E63, E71 (both are basically the same, at least CPU/screensize although E71 is thinner, has a 3MP camera, has GPS, and has dedicated buttons to adjust the volume).
Then Iheard about the N97 and what a revolution it was supposed to be and it was even compared to iPhone.
To........
This is the Intel Atom 330 motherboard with integrated Realtek Gigabit NIC (Intel Desktop Board D945GCLF2 Motherboard W/ Atom 330 1.6 GHz Dual Core Processor - Mini-ITX)
I cannot achieve more than 15 MB/s, even doing a local transfer through eth0 to it's own IP.
100% 95MB 15.9MB/s 00:06
So this is not a cabling, switch or hardware issue, it seems like a driver or chipset limitation problem.
Here is my........
This is really something the SSHServer developers should consider. The cause of this annoyance is because of failed DNS lookups on your IPaddress, which is especially common for many dedicated/col-located servers and also computers on internal NAT/private networks.
The chances are this is the cause of your SSHSlow/Delayed Login problems.
The easy solution to SSH Login Problems
Edit /etc/ssh/sshd_config
Add this line to disable r........
When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it.
More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things.
Output of /var/log/messages for OCFS2
Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........
Server not using user level security and no password supplied.
tree connect failed: NT_STATUS_WRONG_PASSWORD
That happens when trying to use smbclient to connect to a share. The weird thing is that I can authnenticate just fine from Windows XP.
It is partially my mistake, I forgot this share does have a password. I've tried authenticating with the correct user and also with "Guest" because this works in Windows. In Linux I ........
There's a lot of information and guides on OCFS2 for RHELand Centos Linux but the package setup and configuration is slightly different and this has thrown some people off.
Installing OC2FS
You should install the following packages to get started:
apt-get install ocfs2-tools ocfs2console
Configure OC2FS
In RHEL/Centos the main configuration file is located in /etc/sysconfig/o2cb
However in Debian based Linux it is located........
This will give you the basic info needed to browse and connect to Samba shares from the command line. From the GUI of Gnome or KDE etc, it is pretty standard and straight forward. However, I've found very little guides on how to do it from the command line and if you're like me, a nerd who prefers command line for its simplicity and for remote use, this is the way to go.
First get a list of all the Samba/SMB shares on the target.
smbclient -L hostname........
I've read a lot of people complaining that their 1U servers are too loud for the office, home or whatever strange places people might want to put them.
Whenever Isee the question asked, "what can be done about the noise", you'll see a myriad of silly answers like "you shouldn't have it at home or in your office at all", "1U servers are meant to be loud".
These all might be valid points but they're not the solution. A good example is a........
Ithink there has been a lot of negative press towards Rackable Systems. We will give their new solution credit that it is marketed very well, and comes prepackaged and ready to go.
But let's cut through the hype of both sides, the people who love this concept and the people who hate it.
What Rackable Systems have done is a first, to minimize space, power and costs into small servers. This is great, and many companies have already built their own servers based........
I've been struggling with this for awhile, wondering why all of my variables are null. Ijust realized the variables disappear after leaving this while loop.
Note that I'm piping to the while loop which makes a subshell Ibelieve which is the cause of the issue:
echo "$accounts"|while read thisline; do
somevariable="some value"
(( ++counter ))
done
At all costs you ne........
User username from 127.0.0.1 not allowed because not listed in AllowUsers
What's going on? The user was created properly, it has been defined as having a shell entry and the entry for /etc/passwd and /etc/shadow is set just fine.
This is a new and very smart/secure feature of SSHD. It is simple and yet effective, but also very annoying if you didn't know about it being implemented and that hand editing of /etc/ssh/sshd_config is required to allow a newly add........
Feb 5 01:39:33 server named[19768]: zone myzone.com/IN: serial number (12331465) received from master 127.0.0.2#53 < ours (200901281)
The above is taken from /var/log/messages
This can be annoying, it can happen for a variety of reasons. What seems to be happening here is that the slave realizes the time on the slave is ahead of the master, so it therefore assumes it has the most up to date copy and won't actually transfer the zone.
The solutio........
At this time we can't resolve Enom's website and all DNS requests to their 4 primary name servers are failing, although the hostnames themselves still resolve:
Name Server: DNS1.NAME-SERVICES.COM
Name Server: DNS2.NAME-SERVICES.COM
Name Server: DNS3.NAME-SERVICES.COM
Name Server: DNS4.NAME-SERVICES.COM
Name Server: DNS5.NAME-SERVICES.COM
You would really think Enom, bein........
There's a lot of outdated information and confusion for system administrator's out there.
One annoying task for many an Administrator has been backing up data in Linux. You don't need any GUI tools such as K3B or GnomeBaker. Both are excellent tools but for veteran command line users working remotely, using the keyboard is a great and possibly automated way to save yourself pain and hassle.
At a later date we'll cover how scripting can automatically backup certain........
http://searchenginewatch.com/2165111
This was an interesting article and people should be wary of Google's power. Google's policies and actions against competitors borders on anti-trust, far worse than Microsoft.
They are doing the right thing for all of us, Google says selling advertising and links is bad for search engines, yet they don't penalize sites who use AdSense.
........