• hostapd example configuration for high speed AC on 5GHz using WPA2


    This example is using RTL8821AU chipset from a TP-Link T2U Plus USB adapter and other similar ones should work the same. Here's how to get this chipset RTL8821AU working in Linux. Here's how to get RTL8812 and RTL8822 working in Linux.........

  • hostapd how to enable and use WPS to connect wireless devices like printers


    Edit your /etc/hostapd/hostapd.conf file like below and restart hostapd. #WPS stuff # Enable control interface for PBC/PIN entry ctrl_interface=/var/run/hostapd eap_server=1 wps_state=2 ap_setup_locked=1 wps_pin_requests=/var/run/hostapd.pin-req config_methods=label display push_button keypad #WPS model info stuff change to suit your needs device_name=USB2.0 WLAN manufacturer=ATHEROS model_name=WAP........

  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730


    This is certainly a poor design, as you can read many seasoned admins who have updated their iDRAC only to have it killed. One possible cause is not by doing all the incremental updates, doing updates from an old iDRAC to one many revisions newer is a sure way to kill things, but even then there is no guarantee based on the amount of failures. List of threads of people's dead iDRAC's:........

  • Cloned VM/Server/Computer in Linux won't boot and goes to initramfs busybox Solution


    This is mainly for if you've done something silly like trying to clone a Live, running VM image. In this example, the VM initially finds grub and tries to boot but is kicked straight into initramfs rescue mode/busybox right after this. If you've done this "silly" thing, you could have dataloss but a lot of times just using fsck will fix it as you are guaranteed at best to have some corruption and inconsistencies in the filesystem. My theory is that some files wer........

  • How To Add Windows 7 8 10 11 to GRUB Boot List Dual Booting


    Many times just doing an update-grub may find Windows and add it to grub, but a lot of times it won't. Create Windows in a custom grub entry like below: sudo vi /etc/grub.d/40_custom menuentry "Windows 10" { set root='(hd0,0)' chainloader + 1 } Change Windows 10 to whatever you want to call it. For example if it was for Windows 11 you'd probably want to ca........

  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile


    This guide assumes you have a working Postfix server and want it to sign with DKIM. There are a few things we have to understand to make all of this work though, which require you to be familiar with DNS as well. 1.) Install OpenDKIM apt install opendkim systemctl enable opendkim 2.) Edit /etc/opendkim.conf Syslog yes SyslogSuccess yes Mode&nbs........

  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial


    apt install tftpd-hpa #change TFTP_ADDRESS to by setting address to 192.168.1.1:69 or the IP you need, otherwise it will listen on all IPs and interfaces which could be a security risk. # edit /etc/default/tftpd-hpa TFTP_USERNAME="tftp" TFTP_DIRECTORY="/srv/tftp" TFTP_ADDRESS="192.168.1.1:69" TFTP_OPTIONS="--secure"........

  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.


    This sometimes happens when trying to install the EFIversion of grub to a device when you are booted into Legacy/MBR mode. It doesn't seem to occur on all machines, but some and seems somewhat BIOS dependent. grub-install --target=x86_64-efi /dev/sda Installing for x86_64-efi platform. grub-install.real: warning: Couldn't find physical volume `(null)'. Some modules may be missing from core image.. grub-install.real: warning: Couldn't find physica........

  • Linux Debian Mint Ubuntu Bridge br0 gets random IP


    This can break things easily in remove environments where it was normally easy to convert a normal eth0 to a bridge under br0, and that bridge would normally have the same MAC address by default, which is desirable for most situations. In Debian 11 this is different for some reason now. https://unix.stackexchange.com/questions/681013/bridge-gets-random-mac-........

  • redis requirements


    sysctl vm.overcommit_memory=1 echo never > /sys/kernel/mm/transparent_hugepage/enabled echo 511 > /proc/sys/net/core/somaxconn 1:M 26 Nov 2023 21:34:33.840 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128. 1:M 26 Nov 2023 21:34:33.840 # Server initialized 1:M 26 Nov 2023 21:34:33.840 # WARNING overcommit_memory is set to 0! Background sa........

  • How to kill a docker swarm


    Assign way more replicas than you have of memory on all nodes and watch the Swarm crash which can easily reproduce in a small VMfor testing. root@Deb11Docker01:~# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAM........

  • docker swarm silly issues


    The error below can be caused by a gateway that is unpingable: docker swarm join --token SWMTKN-1-1kogg8da68gtb1j7ezaddowyy9s0an5s9tue758o20k18liskw-5h3f61hrrmv3u6agshvbtcklf 172.16.1.80:2377 Error response from daemon: manager stopped: can't initialize raft node: rpc error: code = Unknown desc = could not connect to prospective new cluster member using its advertised address: rpc error: code = DeadlineExceeded desc = context deadline exceeded........

  • isc-dhcp-server dhcpd how to get longer lease


    You can do a static lease that is tied to the MAC address but what a lot of users prefer is that they come into the office or lab the next day and that their device gets assigned the same IP address (if possible). As we can see in the dhcpd logs that there is threshold that is defaulted as we'll show later. Whatever the threshold is set at, if the lease is younger than the threshold, it will keep the same lease. In other words, if the device goes to sleep or is powered off........

  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian


    This seems to happen in many different drivers but it happened more often in newer versions such as 530 vs 525. Then nvidia-modeset goes to 100% There are many reports of this appearing since driver 4.70 and I can confirm I've seen this in various machines. https://forums.de........

  • zfs and LUKS how to recover in Linux


    Sometimes users take their removal drives and unplug and replug them to test what happens during the failure of a disk. However, this breaks things quite badly due to the /dev/mapper in LUKS not coming back online due to it not being closed. In other words, generally with non-encrypted drives the process is smooth but when encrypted you may want to follow a strategy like this: We can see below that both disks are unavailable as they were physically remov........

  • How to access a disk with bad superblock Linux Ubuntu Debian Redhat CentOS ext3 ext4


    Have you ever tried mounting a partition that you exists but you get this error? mount: /mnt: can't read superblock on /dev/sda1. The superblock in this example was bad because the physical disk had corruption and bad blocks/sectors. However, the data was generally accessible and you can always try this trick below (with caution and no warranty). This is specifically for filesystems that place superblocks in multiple locations, which........

  • ImageMagick error convert solution - convert-im6.q16: cache resources exhausted


    convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244. convert-im6.q16: cache resources exhausted `/tmp/magick-27777Al6FGY7dhyKt10' @ error/cache.c/OpenPixelCache/3984. convert-im6.q16: DistributedPixelCache '127.0.0.1' @ error/distribute-cache.c/ConnectPixelCacheServer/244. convert-im6.q16: cache resources exhausted `/tmp/magick-277772Y_-pJnMdT2r1' @ error/cache.c/OpenPixelCache/3984. convert-im6.q16: Distr........

  • Migrated Linux Ubuntu Mint not starting services due to broken /var/run and dbus - Failed to connect to bus: No such file or directory solution


    This is a weird issue as sometimes when upgrading or even migrating, this could happen and the reason is simple but maybe not 100% obvious at first. You will find that your GUIdoesn't load and most services fail to start, even logind Here are some errors you may see: Mar 13 22:22:23 rttbox systemd-logind[2892]: Failed to connect to system bus: No such file or directory Mar 13 22:22:23 rttbox systemd-logind........

  • File "/usr/local/lib/python3.5/dist-packages/pip/_internal/utils/entrypoints.py", line 12 f"pip{sys.version_info.major}", ^ SyntaxError: invalid syntax python pip3 error solution


    Is python3-pip pip3 not working anymore? Traceback (most recent call last): File "/usr/bin/pip3", line 11, in sys.exit(main()) File "/usr/local/lib/python3.5/dist-packages/pip/__init__.py", line 11, in main from pip._internal.utils.entrypoints import _wrapper File "/usr/local/lib/python3.5/dist-packages/pip/_interna........

  • How To Stop DNSMasq from listening on all IPs/Interfaces and allow only localhost


    Some people find it less than intuitive to do on DNSMasq and by default DNSMasq is available on 0.0.0.0 which could even be your LAN or Public IP. Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp ........

  • Docker Swarm vs Kubernetes Comparison Guide


    A lot of companies are unsure which solution to choose and many may not be aware of Docker Swarm as an alternative to Kubernetes. One thing that many Sysadmins find is that Docker Swarm is simply easier, quicker to setup and maintain by far than Kubernetes.........

  • When is it time to leave your VPS/VDS Cloud Hosting Provider?


    When Is It Time to Leave Your VPS, VDS, and Dedicated Server Provider? Choosing the right hosting solution—be it Virtu........

  • 2024 Buyer's Guide: How to Choose and Buy the Best VPS/VDS for Your Needs - Tips and Strategies


    In today’s digital landscape, finding a reliable and secure Virtual Private Server (VPS) or Virtual Dedicated Server (VDS) goes beyond just comparing specs and prices. With increasing concerns over data privacy, security breaches, and government surveillance, the wisdom of choosing your VPS/VDS provider based on juri........

  • Postfix / sendmail config for DKIM, SPF and DMARC Tutorial Guide E-mail Delivery for Hotmail.com Gmail.com and More HowTo


    This will be the goto to help solve e-mail delivery issues and talk about many practical issues that happen between developers, admins and scripts that send e-mail and do things that may not be acceptable or cause deliverability problems. Sendmail Stuff Edit /etc/mail/sendmail.mc The problem is that if you send directly out from the server using the mail function, the Return-path of the e-mails will be username@thehostnameoftheserver.com. Let........

  • Install Grafana on Linux Debian Ubuntu Tutorial Guide


    First we need a few extra packages: apt update apt install -y adduser libfontconfig1 musl sudo wget https://dl.grafana.com/enterprise/release/grafana-enterprise_10.3.1_amd64.deb Install / Enable Grafana dpkg -i grafana-enterprise_10.3.1_amd64.deb dpkg -i grafana-enterprise_10.3.1_amd64.deb (Reading database ... 44309 files and directories currently installed.) Preparin........

  • How To Completely Disable ufw in Linux Ubuntu Mint Debian


    This is for the situation that you're doing other things that may conflict or have your own custom rules and ufw keeps overriding iptables. A lot of guides don't work, and even ufw reset does not work, because it still leaves the old ufw chains. Here is what works to disable ufw completely systemctl stop ufw systemctl disable ufw ufw disable rm -f /et........

  • Mint Ubuntu Linux Gnome Showing Home Directory on Desktop instead of Desktop Directory


    During a migration or other custom setup, it's possible you don't have a $HOME/Desktop and as a result the config file that controls this is set to just use your $HOME directory. This is controlled in the file: $HOME/.config/user-dirs.dirs As we can see below, Desktop, Downloads, Music and Pictures are set to $HOME. We can edit any of these as we like. # This file is written by xdg-user-dirs-update # If you want........

  • Proxmox How To Rename Node Hostname Fix Solution


    Proxmox's documentation shows the following here. Which mainly just says change /etc/hosts and /etc/hostname with your new hostname. Here's what happens if you only do that: If you just do the above, you will find you have an inaccessible original hostname that contains those VMs and you cannot........

  • Linux how to get list of all timezones on system Ubuntu


    find /usr/share/zoneinfo/|sed s#"/usr/share/zoneinfo/"##g|grep "/"|grep -v posix|grep -v ^"Etc/"|grep -v ^right|grep -v ^"SystemV" Africa/Addis_Ababa Africa/Abidjan Africa/Blantyre Africa/Lusaka Africa/Casablanca Africa/Libreville Africa/Asmara Africa/Bujumbura Africa/Dakar Africa/Lagos Africa/Malabo Africa/Harare Africa/Kigali........

  • configure.ac:75: error: possibly undefined macro: AC_PROG_LIBTOOL If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. solution


    configure.ac:75: error: possibly undefined macro: AC_PROG_LIBTOOL If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. autoreconf: /usr/bin/autoconf failed with exit status: 1 make: *** [/software/pixman/configure] Error 1 make: *** Deleting file `/software/pixman/configure' yum install libtool........

  • Can't exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 326. autoreconf: failed to run aclocal: No such file or directory solution


    autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --output=aclocal.m4t Can't exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 326. autoreconf: failed to run aclocal: No such file or directory make: *** [/software/pixman/configure] Error 1 Just install automake: yum install automake........

  • How To Upgrade Debian 8,9,10 to Debian 12 Bookworm


    Step 1.) Upgrade to Debian 11 first The process to go to Debian 12 is not as smooth as 11, when trying to upgrade from Debian 10. In fact, it doesn't work directly, so you'll first need to follow this guide to update to Debian 11, reboot and come back here if successful. Step 2.) Update sources.list Update your /etc/apt/sources.list like this: deb http://........

  • Linux dhcp dhclient Mint Redhat Ubuntu Debian How To Use Local Domain DNS Server Instead of ISPs


    If you are running a local DNS server like named/bind and don't want to use the ISPsupplied DNS servers that are announced via a DHCP request (using dhclient) then the solution is simple. The reason should be obvious, but normally running your own DNS server will provide a more reliable, and fast DNS response and you won't have to worry about filtering as much (unless your upstream filters or proxies outgoing DNS requests). Edit /etc/dhcp/dhclient.conf........

  • qemu-nbd: Failed to set NBD socket solution qemu-nbd: Disconnect client, due to: Failed to read request: Unexpected end-of-file before all bytes were read


    You are trying to mount and connect to an image using qemu-nbd: qemu-nbd -c /dev/nbd0 rtt.qcow2 qemu-nbd: Failed to set NBD socket qemu-nbd: Disconnect client, due to: Failed to read request: Unexpected end-of-file before all bytes were read Another related error: qemu-nbd: Failed to unlink socket /var/lock/qemu-nbd-nbd0: Operation not permitted Error with nbd, exiting........

  • apache2 httpd apache server will not start [pid 22449:tid 139972160445760] AH00052: child pid 23248 exit signal Aborted (6) solution Mint Debian Ubuntu Redhat


    If you get this error, it is often because you have configured Apache with modules that weren't actually installed. Eg. you try to load the PHPmodule but didn't actually install the apache2 php module, so the server can't start. In general, this error can often be caused by issues with problematic modules and/or Apache being configured for modules that have not actually be installed (eg. libapache2-mod-php) is missing. The above results in this less than obv........

  • How to use the FTDI USB serial cable to RJ45 adapter to connect to the console on Cisco/Juniper Switch Router Firewall in Linux Ubuntu Debian Redhat


    This should work for most console ports of other manufacturers too. It is a quick and simple method for emegencies or deploying a few appliances/devices in a non-standard environment or small environment. However, if this is a route thing, or the equipment is not physically close to you, it would be best to use some sort of "Terminal" server which is an IP connected switch with several serial ports built-in for this purpose. Normally they accessible by web/........

  • How To Setup Python3 in Ubuntu Docker Image for AI Deep Learning


    The issue is that Docker images are stripped down, so many tools and even python3 is missing, so you'll have to build or update the actual image yourself. I assume you have started an image with something like this and that you have the Nvidia Toolkit installed (assuming you are using GPUs). If you're not using nvidia just remove --runtime=nvidia --gpus all. docker run -it --runtime=nvidia --gpus all ubuntu bash These works for most images li........

  • How to Configure NVIDIA GPUs with Docker on Ubuntu: A Comprehensive Guide for AI Deep Learning CUDA Solution


    Welcome to our in-depth guide on configuring NVIDIA GPUs with Docker on Ubuntu. This post is tailored for developers, data scientists, and IT professionals who are looking to leverage the power of NVIDIA's GPU acceleration within Docker containers. Whether you're working on machine lea........

  • Linux Ubuntu Mint how to check nameservers when /etc/resolv.conf disabled solution


    You'll notice that /etc/resolv.conf contains dire warners on most Linux Desktops. # This file is managed by man:systemd-resolved(8). Do not edit. # # This is a dynamic resolv.conf file for connecting local clients to the # internal DNS stub resolver of systemd-resolved. This file lists all # configured search domains. # # Run "resolvectl status" to see details about the uplink DNS servers # currently in use........

  • Linux How To Access Original Contents of Directory Mounted Debian Mint CentOS Redhat Solution


    Let's say you have a directory /mnt/raid which has files and directories inside it, but nothing is mounted to it. Then you mount a block device such as /dev/sdh to /mnt/raid Even though /mnt/raid has files and directories there, you can only see the mounted contents of /mnt/raid. How do we access the original contents? Just do a bind mount of the root filesystem to another location. mkdir /bindmount mount --bind / /b........

  • How to Reset CIPC Cisco IP Communicator for CME CUCM CallManager


    Just hit **# on the keypad and the CIPCwill enable the button in settings for a factory reset. Sometimes the phone may run into issues or may be unable to register to another tftp server (eg. another CME or CUCM server) due to a bug or maybe due to the security settings tying it to a specific server. Step 1 - Click Settings Step 2 - Hit "**#"........

  • Internet Explorer Cannot Download File "Your security settings do not allow for this file to be downloaded." Security Settings Solution


    By default in most newer Windows installs, you will not be able to download files from "Internet" sites and you'll get this error "Your security settings do not allow for this file to be downloaded." Solution to Enable Downloads in IE Internet Explorer 1.) Go to Settings (button) -> Internet options -> Security (tab) 2.) Click "Internet" and then the "Custom Level" button. 3.) Find the following section and set D........

  • Linux How To Upgrade To The Latest Kernel Debian Mint Ubuntu


    How to check what kernel version you have/currently running? uname -rm 5.4.0-91-generic x86_64 The above shows us that we are running 5.4.0-91-generic on the x86_64 architecture. The safest way is to stick with the same flavor eg if you're on generic, and say on kernel 5.4.0 then it makes sense to follow what is below. However, if you are migrating or dual booting between newer hardware (eg. you got a........

  • Linux swapping too much? How to check the swappiness and stop swapping


    We could always disable swap but this would normally be a bad idea unless you have an incredible amount of RAM and a workload that will never exceed it. However, for live/containerized and high performance environments it could be desirable. Another middle ground may be to set swappiness to a lower number. You may also want to clear your kernel's cache, which could be eating up RAM unnecessarily by c........

  • bash: apt-add-repository: command not found solved solution fix


    Getting this error "bash: apt-add-repository: command not found"? You need to install the software-properties-common to solve the error: sudo apt-get install software-properties-common........

  • How to upgrade to the latest Python version on Linux Ubuntu Debian Mint 3.11


    A lot of developers want to go to 3.11 because of the speed improvements, but most distros never have the latest Python version. Using the deadsnakes third party repo is the easiest way aside from compiling it yourself (which is safer and recommended): Step 1 - Add the repo apt-add-repository ppa:deadsnakes/ppa If you get an error about requests then install it:........

  • Could not read response to hello message from hook [ ! -f /usr/bin/snap ] || /usr/bin/snap advise-snap --from-apt 2>/dev/null || true: Connection reset by peer


    You may have a broken apt configure that calls for snap (which is not installed if you get the error below): apt install coreutils Reading state information... Done E: Could not read response to hello message from hook [ ! -f /usr/bin/snap ] || /usr/bin/snap advise-snap --from-apt 2>/dev/null || true: Connection reset by peer E: Could not read message separator line after handshake from [ ! -f /usr/bin/snap ] || /usr/bin/snap advi........

  • How to remove metadata from pdf on Linux Ubuntu


    Install exiftool: apt install exiftool Remove the metadata from "thefile.pdf": exiftool -all= thefile.pdf Warning: [minor] ExifTool PDF edits are reversible. Deleted tags may be recovered! - thefile.pdf 1 image files updated Metadata, in the context of PDFs, refers to a set of data that describes and gives informat........

  • How to install and configure haproxy on Linux Ubuntu Debian


    haproxy is one of the best known and widely used Open Source load balancers out there and a strong competitor to nginx. haproxy is used by many large sites per Wikipedia: HAProxy is used by a number of high-profile websites including GoDaddy, GitHub,........

  • Linux Ubuntu Mint Gnome keyboard Typing not working in certain application or window solution


    This is a weird issue in Mint Ubuntu gnome that I've only seen on one system. It may happen in your terminal or your browser but one program will just refuse to allow input from the keyboard. I am not sure if it's some weird fluke on a strange keyboard by perhaps accidentally hitting a weird key combination. In some windows the keyboard gets weird and only / and Esc seem to work. / brings up quick find and sometimes Esc will close it........

  • talib/_ta_lib.c:747:10: fatal error: ta-lib/ta_defs.h: No such file or directory


    If you are installing ta-lib for Python and get this error then you can normally solve it by manually getting the ta-lib source files and compiling. tar -zxvf ta-lib-0.4.0-src.tar.gz cd ta-lib;./configure;make;make install Collecting ta-lib Downloading https://files.pythonhosted.org/packages/39/6f/6acaee2eac6afb2cc6a2adcb294080577f9983fbd2726395b9047c4e13ec/TA-Lib-0.4.26.tar.gz (272kB) &nbs........

  • How to install Windows or other OS and then bring to another computer by using a physical drive and Virtual Machine with QEMU


    This has been a tried and true method for Windows because it is finicky with hardware changes without a reinstall (eg BSOD on boot is what happens 9/10 times unless you move to the same hardwar). Surprisingly, if you use a QEMU VM and do a standard install, it has worked in every system I've thrown the drive in afterwards. So the play is this, use a USB SSD, physical SATA drive plugged internally or for convenience, you could use a SATA to USB adapter on another computer to perf........

  • vagrant install on Debian Mint Ubuntu Linux RHEL Quick Setup Guide Tutorial


    1 - Install Vagrant apt install vagrant Make sure you have a supported Virtualization tool like Virtualbox or VMWare, Hyper-V etc.. It automatically detects and uses what you have. Virtualbox has a lot of support here with tons of images. 2 - Init Vagrant We'll init to have a Debian 10 box by default to show how quick and easy it is. vagrant init generic/debian10........

  • RHEL 8 CentOS 8, Alma Linux 8, Rocky Linux 8 System Not Booting with RAID or on other servers/computers Solution for dracut and initramfs missing kernel modules


    This seems to have changed for RHEL 8 where a normal dracut to update your initramfs creates a system that only boots for the running kernel. For example if you have Kernel 5 and then chroot into a RHEL 8 variant which uses kernel 4.18, and run dracut, it seems that by default the system will be unbootable. It is also the case that if you move your RAID array or drives to another server that it will be unbootable, because dracut seems to only include modules needed for the curre........

  • How to Upgrade to Debian 11 from Version 8,9,10


    This likely works for even older versions but I have only tested on 8,9,10 (11,12). It's quite impressive at how easy it is to upgrade from a very old version to the new version. I would say that Debian version upgrades are some of the quickest and smoothest of any distro. 1.) Backup your /etc/apt/sources.list cp /etc/apt/sources.list ~ #Get your keys first, you need the latest keys for Debian 11 or it won't work:........

  • Virtualbox Best Networking Mode In Lab/Work Environment without using NAT Network or Bridged


    Virtualbox is a very powerful tool, but for some use cases it is less than optimal. Say you are in a work, lab or other environment where you are not alone on the physical network and there could be overlap of IPs, but you need all of your VMs to be contactable from your host, VMs need to communicate with each other, and VMs need internet. NAT Network will give you VM to VM communication and internet, however, it is buggy and unstable. It also doesn't allow host to VM co........

  • debootstrap how to install Ubuntu, Mint, Debian install


    In this example we install debian 10 with --variant=minbase which gives us a minimal/tiny install. Don't use variant if you want the full size install. mkdir /tmp/deb10files debootstrap --variant=minbase buster /tmp/deb10files/ Did you get an error? debootstrap --variant=minbase buster /home/theuser/VMs/deb10files/ You'll get this error if you make a directory in your home........

  • Linux grub not using UUID for the root device instead it uses /dev/sda1 or other device name solution


    You can read lots of posts about this issue but there is not much information about why this is the case or how grub determines the root= device name. Some even suggest modifying grub.cfg manually which is a disaster as the next kernel update will cause grub to revert back to the device name. For most people this won't be an issue but those using template system, automated deployments and working in embedded may run into this issue with custom embedded and created minimal kernel........

  • iptables NAT how to enable PPTP in newer Debian/Ubuntu/Mint Kernels Linux


    Remember that control connections are established on port 1723 and then actual data is transferred over GRE protocol 47. If you have a NAT setup this will work without special forwarding or accepting of GRE packets (normally if you are not blocking outgoing connections and accepting established and related connections). The below two commands will get things going so PPTP and GRE work We first load the ip_nat_pptp module which allows PPTP to work with........

  • Linux How to Check Which NIC is Onboard eth0 or eth1 Ubuntu Centos Debian Mint


    So say you happen to have 2 NICs of the exact same chipset, they will generally show up as the same name, with possibly a different revision in lspci. Normally this is not an issue if you have a server with 4 NICs, generally the eth0 to eth3 appears from left to the right (or right to left on some vendors) so it doesn't take much figuring out. Generally if you have different chipsets for different NICs, it should be easy to know which one is eth0 or the first NIC in the OS.........

  • VboxManage VirtualBox NAT Network Issues Managment Troubleshooting


    If you find your NAT Network is not working properly, the first thing you may want to do is list the networks, check their status and make sure the Network is actually started and configured as you expect (eg. is DHCP on and enabled?). This is a long known, unresolved bug that seems to affect Version 6 randomly and disportionately on especially Mint 20/Ubuntu 18. https://www.virtualbox.org/ticket/1474........

  • Dell PowerEdge Server iDRAC Remote KVM/IP Default Username, Password Reset and Login Information Solution


    Are you new to the company, datacenter or a third party who is responsible for deploying a fleet of servers from scratch. The first step is to normally login to the KVM so you can perhaps manually reinstall, PXE boot the Cloud Image or reimage/reinstall an OS but you need access to the KVM/IP or what Dell calls iDRAC. It's common that you may have forgotten this information or that another employee or colleague has changed the info and did not tell you, that they have left the........

  • Stop ls in Linux Debian Mint CentOS Ubuntu from applying quotes around filenames and directory names


    Later versions of ls try to be helpful and smart to prevent errors in dealing with files with spaces that were tradtionally a pain. However if you need the raw/real filenames, this can break scripts or if you are pasting into a csv etc.... How do you make ls not add the quotes? Add the capital "-N" switch ls -N You could also add an alias to make it more permanent Do this to add it to ~/........

  • Thunderbird Attachment Download Error Corrupt Wrong filesize of 29 or 27 bytes Solution


    This is an ongoing issue even with the latest Thunderbird 102.x where attachments downloaded via IMAP just won't save or will be corrupt which is a huge interruption to workflow or if you come back later to find out the file you thought you saved is invalid/corrupt and you have perhaps deleted the e-mail. How to solve the Thunderbird filesize attachment issue? 1. Click on "Settings". then go to "General". 2. Scroll to the bottom to find "Conf........

  • Generic IP Camera LAN Default IP Settings DVR


    If you are converting a generic wifi IP camera to ethernet, it may not be that simple as many are default hard coded to a static IP of 192.168.1.168 and login info admin/admin. From there you can login to the camera and assign it to DHCP by going to http://192.168.1.168 For security these cameras +DVR should be on a separate untagged VLAN or if possible a physically isolated non-internet connected switch/network. The reference below is applicable to many of the r........

  • Ubuntu Debian Mint Linux How To Update Initramfs Manually update-initramfs


    The easiest way for the current running kernel is: update-initramfs -u -k `uname -r` You could change -k to a specific kernel name if for some reason the current is not running (eg. if you are chrooted or in recovery mode). If you want to update all kernels then use "-k all" update-initramfs -k all -u update-initramfs: Generating /boot/initrd.img-5.4.0-162-generic........

  • Enable Turbo Mode for CPU Ubuntu Linux Mint Debian Redhat


    Sometimes due to your BIOS/EFI you may find that you have chosen "Energy Efficient" for your CPU which may effectively disable turbo mode. This is because "Energy Efficient" will often restrict or throttle your CPU to the base speed. This can impact nearly any CPU such as Intel's, AMDs, Opteron, Xeon etc... This is of course frustrating, for example if you have a CPU that is 2.0GHz base speed but turbo to 2.5GHz, you will never hit more than 2GHz.........

  • docker / kubernetes breaks Proxmox QEMU KVM Bridge VMs


    Docker adds iptables rules that break a lot of things including MASQUERADE or anything that needs the FORWARD table. If NAT is not working after Docker installation, it is probably because it set the iptables FORWARD policy to DROP. This may also make you think that your br0 or bridge is not working, but it's likely just due to what we'll mention later on below, that, Docker probably set your FORWARD chain to default DROP all packets, so nothing on your bridge ever makes it out........

  • How To Change Storage Location in Docker.io


    It sounds intuitive that you may just move the /var/lib/docker dir to another location and symlink it back but it won't work and you'll get an error. How to move Docker Storage the Correct Way This assumes that you want to use /mnt/raid as the new location. 1.) Stop Docker systemctl stop docker 2.) Move /var/lib/docker mv /var/lib/docker /mnt/raid/ 3.) Edit the Docker daemon file Specify the path you wan........

  • Cisco UC CME How To Enable Licensed Features


    Router#show license Index 1 Feature: ipbasek9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted Lic........

  • from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60 sys.stderr.write(f"ERROR: {exc}") from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packag


    Solution for python pip3 not working anymore from pip._internal.cli.main import main File "/usr/local/lib/python3.5/dist-packages/pip/_internal/cli/main.py", line 60 sys.stderr.write(f"ERROR: {exc}") wget https://bootstrap.pypa.io/pip/3.5/get-pip.py python3 get-pip.py DEPRECATION: Python 3.5 reached the end of its life on September 13th, 20........

  • ModuleNotFoundError: No module named 'pip._internal' solution python


    pip3 install requests Traceback (most recent call last): File "/home/user/.local/bin/pip3", line 7, in from pip._internal.cli.main import main ModuleNotFoundError: No module named 'pip._internal' As a quick and temp fix call the OS installed python and not the user .local/bin installed pip3 /usr/bin/pip3 install requests Collecting requests Cache e........

  • grub blank screen how to manually boot kernel and initrd Linux Ubuntu Debian Centos won't boot solution


    You probably didn't do an "update-grub" and grub no longer has any proper menu entries, but before you can fix it let's try to get grub booting anyway. If you get this lovely black grub screen here's how you can get things booting. In my case I have a gpt partition with partition 1 and 2. Partion 1 is just my EFI / ESPand partion 2 /dev/sda2 is my root which includes /boot. You will have to adjust this if you had a separate /boot partition.........

  • Cisco Switch / Router How To Restore Factory Default Settings


    1.) Make sure your conf register is 0x2102 Do show version and at the very end of the output you will see the Configuration register. show version Configuration register is 0x2102 If the config register is not 0x2102 then enter this command: r1#configure terminal r1(config)#config-register 0x2102 r1(config)#end 2.) Let's Erase the NVRAM/flash........

  • Cisco 2900 3900 Router Password Reset How To Reset Enable Password


    It is a bit different and annoying here for these types of routers/models as you need to physically remove the CF (Compact Flash) and only then, will it enter ROMMON mode (Ctrl + Pause remotely over the console will not do it for us). This means you cannot do this remotely, or at least not without the help of a remote/physical helper. Step 1.) Power off, router and remove CF Disk Slot#2 Go to the router and remove the slot#2 cover uses your hand or it may help to use a........

  • Error opening tftp://10.0.2.2/network-confg (Permission denied) - How To Fix Cisco Router Switch Error Solution Console


    How To Fix This Cisco Switch/Router Error %Error opening tftp %Error opening tftp://10.0.2.2/network-confg (Permission denied) %Error opening tftp://10.0.2.2/cisconet.cfg (Permission denied) %Error opening tftp://10.0.2.2/router-confg (Permission denied) %Error opening tftp://10.0.2.2/ciscortr.cfg (Permission denied) %Error opening tftp://10.0.2.2/network-confg (Perm........

  • How to find out which package a file belongs to in Debian Mint Ubuntu Linux


    To find which package a file is from just pass it the path to the file in question, whether it's a config file or binary, you'll find your answer (assuming it does belong to a package of course). Just use dpkg -S /path/to/yourfile How To Find Which Package The File Belongs To in Debian Mint Ubuntu Linux eg. dpkg -S /usr/bin/xed xed: /usr/bin/xed dpkg -S /etc/pam.conf libpam-runtime........

  • Centos 7 not mounting /etc/fstab partitions


    If you are doing a custom deployment and image, make sure that when you rsync'd or tar'd that you didn't mess up the symlnk of /etc/mtab to /proc/self/mounts ln --force -s /proc/self/mounts /etc/mtab Will fix this........

  • CentOS 7 / 8 cannot boot with with mdadm RAID array solution


    This article about migrating to a CentOS 7 /8 RAID mdadm array has a lot of info but I wanted to focus specifically on what newer versions of CentOS 7 require to boot mdadm and what changes are necessary on CentOS 7.8+ CentOS 7 / 8 mdadm RAID booting requirements This assumes you are chrooting into an existing install or using it to get a new deployment ready. However, these steps can........

  • How To Add Default Gateway in Linux using the ip route command routing


    Adding a default route is very simple with this command Just replace 192.168.1.1 with the IPof your GW. ip route add default via 192.168.1.1 How can you delete this default route if you messed it up? It's just the opposite with "delete" instead of add ip route del default via 192.168.1.1 This is the equivalent of the "route command's" route add default gw 192.168.1.1........

  • Error: Failed to download metadata for repo 'appstream': Cannot prepare internal mirrorlist: No URLs in mirrorlist Solution for Centos8 yum package install error


    Are you getting this error in CentOS 8 when trying to use yum to install a package? Error: Failed to download metadata for repo 'appstream': Cannot prepare internal mirrorlist: No URLs in mirrorlist What we need to do is not use the automatic mirror list and manually set the base URL Solution sed -i 's/mirrorlist/#mirrorlist/g' /etc/yum.repos.d/CentOS* sed -i 's%#baseurl=http://mirror.centos.org%baseurl=........

  • Loaded: masked (Reason: Unit hostapd.service is masked.) Solution in Linux Debian Mint Ubuntu


    If you are getting this error from systemctl "Loaded: masked (Reason: Unit hostapd.service is masked.)" we need to unmask the service. Solution systemctl unmask hostapd Removed /etc/systemd/system/hostapd.service. It's fixed root@routerOS:/var/log# systemctl start hostapd root@routerOS:/var/log# systemctl status hostapd ● hostapd.service - Access point and authentication server for Wi-Fi and Ethern........

  • i915 nouveau Nvidia GPU not starting lightdm Xorg failing solution for Could not determine valid watermarks for inherited state


    It may appear to be an Xorg or lightdm/gdm/mdm error but in reality for many users with this issue, it's a driver conflict and issue. I had a system that had two GPUs, an Intel and Nvidia GPU. The only thing that got it working was to remove the nouveau driver and blacklist it so it never came back, then the Intel GPU works fine without these issues. Solution sudo rmmod nouveau add nouveau/other driver to blacklist edit th........

  • br0: received packet on bond0 with own address as source address Linux Solution Mint Debian Redhat CentOS bridge bridging


    A quick fix is to run this command: sudo brctl setageing br0 0 This causes the aging of the MAC address to time out immediately or in 0 seconds, which delete the entry frmo the FDB (Forwarding Database) and causes the error to go away. The default time is 300 seconds or 5 minutes. You can also add it under your br0 definition like this in /etc/network/interfaces to make it permanent and automatic: auto br........

  • Debian Mint Ubuntu Howto Disable Network Manager


    NetworkManager is normally good for GUI users who may not be good with manually confguring devices, but if you are using things like bridging and bonding, it will often break things. How To Disable NetworkManager systemctl disable NetworkManager Now that it's disabled you will need to stop NetworkManager. NetworkManager will still be running until you reboot next or manually stop it. How To Stop NetworkManager systemctl stop........

  • amdgpu AMD GPU Xorg Won't Start [3576284.324] (EE) Segmentation fault at address 0x0 [3576284.325] (EE) Fatal server error: [3576284.325] (EE) Caught signal 11 (Segmentation fault). Server aborting


    Here is how Ifixed it on a Mint/Ubuntu install 1.) First download the latest AMDGPU-Pro driver from here: https://www.amd.com/en/support Navigate to your relevant video card: 2.) Download the installer One issue is that by default they give you a version for the latest version of........

  • /var/log/journal huge/too large solution in Debian Mint Ubuntu Linux Howot Fix


    Is your /var/log/journal overweight and bloated? For example a decent install of Debian 11 with most applications and services ends up being about 4.9G with the journal taking a few gigs. du -hs /var/log/journal/ 1.3G /var/log/journal/ By default in a lot of distributions there is no maximum size so it will keep growing. This is especially problematic for embedded distributions and devices, but is also a huge waste of sp........

  • Libreoffice Calc Opens CSV Spreadsheet File as Asian Language/Chinese Characters Solution Fix


    Usually LIbreoffice gets it right, but if it opens a normal English CSV as UTF-16 by default and shows Asian languages, you'll have ot manually open to fix it (don't double click the file from the File Manager). Solution - Manually Open the File After Opening LibreOffice Calc You'll see it is defaulting to UTF-16 which breaks everything. ........

  • Debian Ubuntu Mint How To Change Default Display Manager


    The display manager is more so what controls the main graphical login process after Debian/Mint/Ubuntu boot and controls the graphical login sequence. Once you login, you are then usually passed to an Xorg based Window manager like XFCE, Mate, Ubuntu etc... Popular display managers are mdm, gdm, lightdm etc... and they all basically do the same thing with a different interface/style and some feature differences. In Mint for example the normal default display manager is l........

  • Ubuntu Mint Debian Howto Execute Command / Script / Program Upon Wakeup From Sleep


    Sometimes manual intervention on various Linux system's, including Debian, is required to fix things after waking up from sleep. One persistent issue is the sound system / pulseaudio needing to be reset and not working until you do that after waking up. It's not clear if it's an OS issue itself or the sound driver, but this will fix things. Where do we put scripts or commands that need to be used upon wakeup automatically? /lib/systemd/syst........

  • Debian Ubuntu Mint DHCP dhclient quits and how to make it persistent if first attempt to get DHCP lease fails


    Debian based OS's have a similar issue as the behavior in RHEL/CentOS dhclient, which is that if you have an interface that relies on DHCP, if the first attempt fails, it will quit and stop. This is a problem especially if you are using your Linux as a router or something else mission critical, but where the internet for some reason may have been down or the DHCP server it gets a lease from broken. The expected behavior you would hope is that when things are back online that the........

  • LightDM Mint Ubuntu Debian won't start errors Nvidia Graphics


    This error implies that there may be an issue with Xorg or maybe your NVIDIA GPU cannot start or initialize: 35 laptop kernel: [ 2031.857704] nvidia: loading out-of-tree module taints kernel. 35 laptop kernel: [ 2031.857724] nvidia: module license 'NVIDIA' taints kernel. 35 laptop kernel: [ 2031.857725] Disabling lock debugging due to kernel taint 35 laptop kernel: [ 2031.873280] nvidia: module verification failed: signature a........

  • WARNING: Unable to determine the path to install the libglvnd EGL vendor library config files. Check that you have pkg-config and the libglvnd development libraries installed, or specify a path with --glvnd-egl-config-path. Linux Ubuntu Mint Debian E


    If you get an error like this when installing the Nvidia drivers: WARNING: Unable to determine the path to install the libglvnd EGL vendor library config files. Check that you have pkg-config and the libglvnd development libraries installed, or specify a path with --glvnd-egl-config-path. Just install these packages: &nbs........

  • How To Upgrade Linux Mint 18.2 to 18.3 to 19.x and 20.x


    Linux Mint offers an easy and painless upgrade path through the last 3 versions, which means no more reinstalling to stay current with the latest version. The only catch is that you need the latest of each version, so for 18, you need 18.3 before you can go to 19, and then 19.3 (or latest), until you go to 20. However, it's really a small price to pay and on the machines we've tested, the upgrade went seamlessly each time (although sometimes video drivers/custom kernel modules l........

  • How To Do Linux Network Bonding Teaming in Mint Debian Ubuntu


    Bonding is an excellent way to get both increased redundancy and throughput. It is similar to the "Network Teaming" feature in Windows. There are a few different modes but we will use mode 6, I think it's the best of both worlds, as it is not just a failover, but it provides round robin, so you will get redundancy and load balancing. So if you have a 1G single port, you will have a combined throughput of 4G at this point. Just bear in mind that the true thr........

  • LXC Containers LXD How to Install and Configure Tutorial Ubuntu Debian Mint


    If you are using mint, delete the preference that stops snap from installing (as it is required for lxc) sudo rm /etc/apt/preferences.d/nosnap.pref 1. Install lxd: sudo apt install lxd Issues install lxd or errors? Click here Debian at this time does not have lxd so you'll need to use snap: sudo apt in........

  • GlusterFS HowTo Tutorial For Distributed Storage in Docker, Kubernetes, LXC, KVM, Proxmox


    This can be used on almost anything, since Gluster is a userspace tool, based on FUSE. This means that all Gluster appears as to any application is just a directory. Applications don't need specific support for Gluster, so long as you can tell the application to use a certain directory for storage. One application can be for redundant and scaled storage, including for within Docker and Kubernetes, LXC, Proxmox, OpenStack, etc or just your image/web/video files or even da........

  • How To Shrink Dynamically Allocated VM QEMU KVM VMware Disk Image File


    Let's say you have a VM file that uses 200G of dynamic space, but really only has 40G in usage. If you add fles and delete, at some point the file will be larger than the current space you are using. Take this image which shows is using 71G of space on the host: The actual space being used inside the image is about 43G as we can see:........

  • How To Enable Linux Swapfile Instead of Partition Ubuntu Mint Debian Centos


    This may be necessary if you have a VM or if for some reason you just want to be more efficient with your space and have the flexibility of changing your swap space at will. What we mean is the ability to use a "swap file" or similar to the Windows "pagefile" that normally resides on the root or c: partition of Windows. Here's all you have to do and then you to can have a single partiton with everything, including the swap file on the root partition if you........

  • 404 Not Found [IP: 151.101.194.132 80] apt update Debian 11 Bullseye Solution The repository 'http://security.debian.org bullseye/updates Release' does not have a Release file.


    This happens during an apt update and is related to an issue with sources.list, which is particularly troubling, if you are doing a "live-build". P: Configuring file /etc/apt/sources.list Hit:1 http://deb.debian.org/debian bullseye InRelease Get:2 http://deb.debian.org/debian bullseye-updates InRelease [39.4 kB........

  • WARNING: Can't download daily.cvd from db.local.clamav.net freshclam clamav error solution


    freshclam ClamAV update process started at Sun Mar 20 00:30:50 2022 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.100.3 Recommended version: 0.103.5 DON'T PANIC! Read https://www.clamav.net/documents/upgrading-clamav main.cld is up to date (version: 62, sigs: 6647427, f-level: 90, builder: sigmgr) WARNING: getpatch: Can't download daily-26337.cdiff from db.local.clamav.net WARNING:........

  • (firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory) Solution


    (firefox:9562): LIBDBUSMENU-GLIB-WARNING **: Unable to get session bus: Failed to execute child process "dbus-launch" (No such file or directory) ExceptionHandler::GenerateDump cloned child 9743 ExceptionHandler::WaitForContinueSignal waiting for continue signal... ExceptionHandler::SendContinueSignalToChild sent continue signal to child [Parent 9562, Gecko_IOThread] WARNING: pipe error (40): Connection reset by peer: file /build/firefox-EymEXX/fire........

  • Debian Mint Ubuntu Which Package Provides missing top, ps and w Solution


    Install procps and it will install the other packages you need: apt install procps Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: libgpm2 libncurses6 libprocps7 lsb-base psmisc Suggested packages: gpm The following NEW packages will be ins........

  • Vbox Virtualbox DNS NAT Network Mode NOT working


    There is a random bug that sometimes occurs with Vbox NAT mode DNS, although it has never happened in the past and Vbox was working fine until recently. The symptom is that you can see it does get an IP+ DNS from the Vbox NAT DHCP. Below we use resolvectl dns and verify the DNS server is set to 10.0.2.3 which is the DNS from Vbox NAT. We can ping it but it does not respond to any DNS requests when we use dig @10.0.2.3 realtechtalk.com........

  • Docker Tutorial HowTo Install Docker, Use and Create Docker Container Images Clustering Swarm Mode Monitoring Service Hosting Provider


    The Best Docker Tutorial for Beginners We quickly explain the basic Docker concepts and show you how to do the most common tasks from starting your first container, to making custom images, a Docker Swarm Cluster Tutorial, docker compose and Docker buildfiles.........

  • Zoom Password Error 'That passcode was incorrect' - Solution Wrong Passcode Wrong Meeting Name


    Have you been given a Zoom password that the meeting owner says is correct but it doesn't work anymore or never works? If the meeting name says "Zoom Meeting" and it's not really named that (which most meetings are not), then the issue is usually that there is an initial password to be able to join, aside from the passcode. It basically means that Zoom has deauthenticated you randomly or maybe after X amount of uses, without clicking on the Join Meeting URL which contains a........

  • How To Startup and Open Remote/Local Folder/Directory in Ubuntu Linux Mint automatically upon login


    Just click on the Start Menu and go to "Startup Applications" Then click on the "Add"Button Now enter the command we need to open the folder/directory automatically using the filemanager For remote SSH host (you need pub key auth for it to open without a pa........

  • How To Reset Windows Server Password 2019, 2022, 7, 8, 10, 11 Recovery and Removal Guide Using Linux Ubuntu Mint Debian


    This was done on Mint 20 but works the same on nearly any new Linux, but is only recommended for people comfortable or familiar with Linux. This method will work on almost all versions of Windows from NT, 2000, 2003 Server, 2008 Server, 2012 Server, 2016 Server, 2019 Server, 2022 Server, XP, Vista, 7, 8, 10 and 11. However, if you want the easiest solution to........

  • How To Create OpenVPN Server for Secure Remote Corporate Access in Linux Debian/Mint/Ubuntu with client public key authentication


    Why choose OpenVPN instead of a firewall appliance? OpenVPN can be a reliable and easy replacement for traditional hardware or just be an additional tool that your company uses so that the firewall can focus on its job rather than acting as a VPNappliance at the same time. When comparing OpenVPN with traditional firewal........

  • HongKong VPS Server, Cloud, Dedicated Server, Co-Location, Datacenter The Best Guide on Hong Kong, China Internet IT/Computing


    In our 2024 VPS Server/Cloud Buyer's Guide, we place the location of your VPS/hosting/server as one of the priorities that is often overlooked. 2024 Update - Datacent........

  • ssh-keygen id_rsa private key howto remove the passphrase so no password is required and no encryption is used


    The key is that you need to know the passphrase to do it, if you don't know the password for the key then you can't remove the key since it cannot be decrypted. ssh-keygen is the easiest method and openssl can be used to manually remove the key and output it to a new file, which you can then copy back over top of the encrypted file. After that your public key authentication will work without any password prompt because it is no longer encrypted. Make sure you understand........

  • Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source. E: Package 'wget' has no installation candidate. Solution


    These types of errors are normally caused by misconfiguration of your /etc/apt/sources.list. In this example on Debian 10, if you didn't complete the install correctly, you will have no repos enabled and only rely on CDROM. "Package wget is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source. E: Package 'wget' ha........

  • tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE tag#4 Sense Key : Illegal Request [current] res 40/00:b4:98:02:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) solution


    You might assume you have a bad drive or the SATA interface/cable is bad, or the power supply is bad/weak to the drive. These are all possible issues, but definitely check your SATA cable for "twisting". It is a big issue because until the error stops or times out, your system will not boot (in my case this was the case even though the drive with the issue was not part of the OS or booting process at all). If you run an open rig that you move around often that ha........

  • Wazuh / OSSEC Install and Configuration Howto Tutorial Guide for Monitoring Agents SIEM


    How To Install Wazuh Server / Quickest Installation Wazuh (forked from the well known OSSEC project) is a full SIEM (Security Information Event Management) that works extremely well with the platforms it natively supports as an "Agent", which allows you to do scans of everything such as all processes running, CVE vulnerability check, incident reporting etc... Prerequisites: A lot of issues with Wazuh seem to be caused by i........

  • Linux Debian How To Enable Sudo/Sudoers for User "User not in sudoers file" Solution


    If you get an error that you aren't in the sudoers file, this typically means that your user is not designated as an admin with sudo privileges. In plain English, when it comes to some OS's like Debian including 10,11 etc.., by default the user is created without special privileges which is contrary to how Ubuntu/Mint handle the secondary user. Let's check the sudoers file to see the problem.........

  • iptables how to delete rules based on source or destination ip port or just the rule itself


    Let's say we have an IP that is dropped by iptables 192.168.20.2 service iptables status|grep 192.168.20.2 184 DROP all -- 192.168.20.2 0.0.0.0/0 You can use iptables itself like this to list the line numbers: iptables -L --line-numbers Two Ways To Delete The iptables Rule........

  • How to allow SSH root user access in Linux/Debian/Mint/RHEL/Ubuntu/CentOS


    A lot of newer installs will automatically prohibit the root user from logging in directly, for security reasons or they will only allow key based access. If you know what you are doing/don't care about security or have an incredibly secure password for testing, then you can enable it. Edit this file: /etc/ssh/sshd_config Find the following line: PermitRootLogin Set it like this: PermitRootLogin yes Now rest........

  • Ansible Tutorial - Playbook How To Install From Scratch and Deploy LAMP + Wordpress on Remote Server


    1. Let's work from an environment where we can install Ansible on. If you are using an older version of Linux based on Mint 18 or Ubuntu 16, you may want to get the PPA and get the latest version of Ansible that way: sudo apt install gpg sudo add-apt-repository ppa:ansible/ansible sudo apt update........

  • Ceph Install Errors on Proxmox / How To Fix Solution


    This normally happens when you interrupt the install of Ceph: pveceph install update available package list start installation Reading package lists... Done Building dependency tree... Done Reading state information... Done gdisk is already the newest version (1.0.6-1.1). ceph-common is already the newest version (15.2.15-pve1). ceph-fuse is already the newest version (15.2.15-pve1). Some package........

  • Proxmox Update Error https://enterprise.proxmox.com/debian/pve bullseye InRelease 401 Unauthorized [IP: 144.217.225.162 443]


    Are you getting this error in Proxmox while trying to apt update or install Ceph? apt update Hit:1 http://security.debian.org bullseye-security InRelease Err:2 https://enterprise.proxmox.com/debian/pve bullseye InRelease 401 Unauthorized [IP: 144.217.225.162 443] Hit:3 http://ftp.hk.debian.org/debian bullseye InRelease ........

  • QEMU/KVM How to Hot-add A Virtual Disk .raw/.qcow2 via QEMU Monitor Commands


    For a lot of reasons, it may be convenient to detach or attach live disks to a running VM without having to reboot it. Sure, you can use some network based storage, but when performance counts, attaching a new virtual disk will usually give you better throughput and lower latency in a quick testing situation. This doesn't work, why not? drive_add 0 if=virtio,file=/tmp/vm.qcow2,if=virtio,format=qcow2,id=rtt Can't hot-ad........

  • pulseaudio issue on QEMU/KVM guest VM when microphone is replugged/unplugged pulseaudio: pa_threaded_mainloop_lock failed pulseaudio: Reason: Invalid argument


    Here is the scenario, you are using QEMU/KVM and are using something like the AC97 sound driver to pass the host audio to the guest via pulseaudio. This is useful because you can transparently pass your mic input from the host which means you can mute your microphone from the host, which prevents the guest from receiving any mic input even if unmuted. Mute / Unmute Fix This issue also seems to happen even if you press the mute button on the microphone and then unmute,........

  • Ubuntu Linux Mint - Volume Control Stopped Working


    Volume control will often stop working, if your sound server (normally pulseaudio) dies or restarts whether by itself or by you. The reason pulseaudio may need to be restarted is due to some sort of crash or other issue that prevents sound from working (normally restarting or doing a killall pulseaudio fixes things). However, you will normally find at least in OS's like Ubuntu/Mint 16/18+ that you cannot control the volume whether adjusting the level, changing input/outputs and........

  • Proxmox Services Won't Start Failed to start The Proxmox VE cluster filesystem. Proxmox VE firewall. PVE Status Daemon. Proxmox VE scheduler. PVE Cluster HA Resource Manager Daemon. PVE Local HA Resource Manager Daemon.


    There are many reasons why Proxmox services may not start, but one common one, is if you have changed your /etc/hostname or /etc/hosts and don't have a valid FQDN (eg. proxmox01 instead proxmox01.com). Failed to start The Proxmox VE cluster filesystem. Failed to start Proxmox VE firewall. Failed to start PVE Status Daemon. Failed to start Proxmox VE scheduler. Failed to start PVE Cluster HA Resource Manager Daemon. Failed to star........

  • Virtualbox VBOX Howto Port Forward To Guests


    NAT Network, the VMs can communicate but your host cannot access them by default. NAT VMs have internet but cannot communicate with each other. Bridged is simple and allows full LAN access as if you had a physical machine plugged in but is often bad for testing, work or corporate environments and is not very portable when it comes to moving your VMs to other locations and networks. Here is how you can use NAT Ne........

  • Linux Mint 20 cannot install snapd missing solution


    The Linux Mint team has disabled it by setting an apt preference, you can edit or just remove the file: sudo apt install snapd Reading package lists... Done Building dependency tree Reading state information... Done Package snapd is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source........

  • How to install Kubernetes with microk8s and deploy apps on Debian/Mint/Ubuntu Linux


    Kubernetes Easy Beginners Tutorial/Architecture Guide Kubernetes is known as container orchestration and we should start at explaining the container part of it. A Container is what runs the actual application and based on an Image, and are more comparable to something like an LXC Container, Virtuozzo/OpenVZ using the Linux Kernel Namespaces feature. Containers run these images as independent, isolated operating environments under the O........

  • vi how to delete everything to the end of the line or the rest of the line from the cursor


    vi is very handy when doing a lot of config file editing and can save you time over using the mouse or using the x or delete keys to manually delete. Solution: If you don't want it to stop deleting when encountering things like - or _, then you want this: d$ Or if you want it to stop on - and _ then use this: dw Remember both commands are in "non-input mode" so not when you're........

  • Cisco Howto Configure Console Port/Terminal/Comm Server with Async Cable Setup


    This assumes that you've already installed the relevant HWIC cards eg. Cisco Asynchronous Serial NIM These are essentially cards that you install into your router, once installed you connect an Async cable to one of the ports on the card which normally gives you 8 console cables and are normally labelled 1 through 8. You connect all of the cables to the devices you need (even non-Cisco devices) whether switches, routers or firewalls, they will usually work. The real m........

  • Ubuntu/Debian Linux/Unix Howto Setup Install Syslinux Bootable USB with EFI and MBR from Command Line/CLI Terminal


    There aren't too many simple guides that show you how to use commands to setup your USB or other drive as a normal bootable drive where you can easily boot custom kernels or whatever OS you would like. 1. Get the tools we need: We install "syslinux" for MBR and "syslinux-efi" for EFI and "MBR" as we need a tool that embeds the actual MBR into our USB: sudo apt install syslinux syslinux-efi mbr........

  • Cisco Switch Howto Reset Password


    This was done on a 2900 but applies to all the switches of the same era. Step 1 - Power Cycle and enter recovery mode If you have physical access you can power cycle and hold the mode button down for 15 seconds. After that the SYS light will flash on the switch and you will see the following screenshot. If you don't have physical access (eg. it is a datacenter swich over console only) then power cycle and hit "Ctrl+Pause/B........

  • SSH cannot connect to old servers/devices/switches/routers/Cisco/Juniper Unable to negotiate with 192.168.20.2 port 22: no matching key exchange method found. Their offer: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hell


    A lot of older devices either support telnet or very old SSH keyx algorithms which are insecure and disabled by all newer/modern SSH clients for security reasons. However, sometimes you may be on a LAN via VPNor some other secured network or for whatever reason, absolutely, need to connect to this device and sometimes old/embedded devices may not be possible to update to a newer SSH server. If you run into this you may be using a modern/newer SSH client and get thi........

  • bash how to hide username/customize prompt Linux Debian Redhat Ubuntu Solution


    Just edit your ~/.bashrc and add this at the very end: export PS1="realtechtalk.com" Then your prompt will look like this: bladeblox:uptime 08:47:14 up 48 min, 1 user, load average: 1.00, 1.07, 0.96 If you wanted a dollar sign at the end then you would change it like this: export PS1=&........

  • Cisco Router Password Reset Howto Guide Solution Cannot Login /Unknown Enable Password 2600, 2800, 2900, 3900


    It is common that you may get access to undocumented equipment and need to reset the password. This applies to many Cisco routers whether 2600, 2900, 3900 etc... Cisco's Guide says to hit Ctrl +Pause/Break but if it doesn't work on some devices causing people to say "cisco password reset pause break does not work", you can see Cisco's alternative key combinations here:........

  • VirtualBox VBox Nat Network Handing Out Wrong IP Address Subnet Solution


    This seems to be an ongoing issue that is still reproducable in the latest Ubuntu Vbox 6.x. The default NAT Network range is usually 10.0.2.0/24. If you change this range it does not seem to work properly. Say we change the range to 10.50.1.0/24 If you get a new lease you will find that you get an IP from the old range but the default gateway is from the new range. ........

  • Unable to mount location Failed to retrieve share list from server: Connection timed out - Samba/Linux Filesharing Not working Ubuntu Mint Linux Solution


    So you're trying to browse to a properly configured Samba share but you get this error: Unable to mount location Failed to retrieve share list from server: Connection timed out If your config is right, it can be due to a protocol miss-match where your client has not enabled SMB3 but by default the other side (server) has enabled it. You can test this out to see with the smbclient tool........

  • vi how to delete all lines in the file


    1.) gg and dG The easiest way is to type "gg" to bring yourself to the first line of the file and the "dG" clears the contents. 2.) :1,$d Hit Escape and colon and then type: 1,$d and all contents / lines of the file will be cleared.........

  • EFI PXE grub2 Howto guide for Linux EFI PXE Booting on Debian, Mint, Ubuntu, RHEL


    Just a quick note and warning is that if you are testing to see if EFIPXE booting works on a VM, MAKE SURE it actually works. For example Iinitially tested using my Distro's QEMU 2.5+dfsg-5ubuntu10.46 and ovmf BIOS firmware (OVMF supports EFI). However, I found on old versions of QEMU (like 2.5), EFIbooting with GRUB NEVER works so it may appear that you have made a mistake when everything is fine when you boot a physi........

  • Juniper JunOS Command Overview and Howtos Switch, Router, Firewall Tutorial Guide


    Enable "cli" mode equivalent in JunOS cli Configure Mode configure So rather than going to the console on a Cisco switch and typing "enable" and then "conf t", the equivalent in JunOS is "cli" and "configure". How Do You Apply Changes You've Made? You can make all kinds of changes to the switch, but remember they are not........

  • Aruba/HP/Dell IAP Wireless Controller Common Default Passwords


    Aruba has a very traditional "admin" for user and password by default for many of its appliances. If you've reset or just got some new units this will be the default password that you should change immediately for security reasons.........

  • Linux Grub not booting the intended kernel solution in Debian, Mint, Ubuntu how to specify which kernel to boot by default


    Traditionally kernels were numbered starting from 0 but by default the "new style" of grub boot loading considers each subkernel item to be different so if you have 3 entries for 4.40-148 rather than counting for 1. To get the expected behavior let's show this example and how we can boot it We do a grep on menuentry in /boot/grub/grub.cfg to see all of the bootable kernels rather than scrolling through loads of extra entries we don't care about (thou........

  • QEMU KVM Keyboard Problems Not Working Right Repeating Characters, Ctrl+C Copy and Paste not working right when using PS2 mouse in guests Solution


    It seems that QEMU/KVM's default PS2 mouse and keyboard doesn't work right in most cases. I have especially observed issues using Ctrl+C and Ctrl+V and in Linux you may see repeated key presses in the terminal and you will wonder why you copied something and it's not in the clipboard when you try to paste. The way to temporarily fix it is to press the key that is repeating once(works in Linux but not really in Windows). Sometimes when moving your mouse it will also s........

  • Linux how to compile binary with static sharedobjects embedded instead of dynamic to use on multi-distributions and avoid glibc compatiblity issues


    One simple flag to configure will create a makefile that statically links all the shared objects and embeds them instead the binary execute. This means as long as you have the same architecture that things should run. Eg. if you have an old version of Debian with a different version of glibc, then this will solve that problem. ./configure LDFLAGS="-static" To test that it is really statically linked run ldd: ldd src/wget........

  • /bin/sh: msgfmt: not found error solution on Linux Compilation Ubuntu Debian Mint Centos


    If you get this error, you were probably compiling some sort of binary or package and got this error. It is normally solved by installing the "gettext"package. On Debian/Ubuntu just apt-get it: apt-get install gettext After that you should be able to configure and make (compile) properly.........

  • Mikrotik RouterOS CHR/ISO Basic and Quick Setup Howto Guide


    Many people may not be aware that you can turn commodity hardware into a Mikrotik OS and there are various options which is "CHR" (Cloud Hosted Router) which is a VMimage meant for Virtualization only (seriously, I've tried to dd the image to a physical server and it just crashed as it does not contain any drivers for physical). One note as well if you are trying to do a baremetal install you may get an error "Error Loading Operating System" or........

  • CentOS 7 8 PXEBoot Netinstall Not Working Solution "Pane is dead "new value non-exisetnt xfs filesystem is not valid as a default fs type"


    The problem seems to be that whatever kernel and initrd you have is tied to an old version of CentOS 7 that is no longer in the current repos of most mirrors. If you were previously able to PXEboot and install CentOS and you are sure your network and tftp are good the problem is that you have an outdated kernel and initramfs that point to a defunct version.........

  • CentOS 6 EOL yum repo won't work Error: Cannot find a valid baseurl for repo: base Solution


    yum update Loaded plugins: fastestmirror Setting up Install Process Determining fastest mirrors YumRepo Error: All mirror URLs are not using ftp, http[s] or file. Eg. Invalid release/repo/arch combination/ removing mirrorlist with no valid mirrors: /var/cache/yum/x86_64/6/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base You have mail in /var/spool/mail/root ........

  • CentOS 7 8 How To Disable SELinux


    To disable selinux temporarily and immediately: setenforce 0 To make it permanent edit /etc/selinux/config: vi /etc/selinux/config........

  • kdenlive full reset how to erase all config files


    kdenlive is VERY finicky especially if using an older or newer version it can cause crashes, menus not to work, features not to work, things not to work properly. A good example is that Icould NOT get automask to work, there would be no box to control it until I did this full reset. One caution is that your backup project files will be erased when doing this: How to Reset kdenlive entirely rm ~/.config/kdenlive-layoutsrc rm........

  • CentOS 7 8 yum error Trying other mirror. To address this issue please refer to the below wiki article


    The below appears at first to be a bad mirror DNS error, but if you've ruled that out you just need to clear your broken yum cache and things will be good. yum update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.01link.hk * extras: centos.01link.hk * updates: centos.01link.hk http://mirror.worria.com/centos/7.8.2003/os/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not........

  • Scanner not working in Linux Ubuntu Fedora Mint Debian over the network? Use sane-airscan!


    I have a Canon MF642c and the scanner wouldn't work. I tried to use saned but it didn't work with the BJNPlike it did for some other Canon models. Introducing sane-airscan with packages for the most common distributions: https://software.opensuse.org/download.html?project=home%3Apzz&package=sane-airscan http........

  • How To Boot, Install and Run Windows 2000 on QEMU-KVM


    Interestingly enough Windows 2000 works fine on QEMU 64-bit but you have to specify Pentium as your CPU otherwise it doesn't complete the install (it will not pass the detecting/setting up devices phase). -vga cirrus is wise because it is supported by Windows 2000 and allows higher resolutions and 24-bit color. -cpu Pentium emulates an old computer and is necessary for install to complete -device rtl8139 is important as this oldschool Realtek 8139 NIC is supported by W........

  • Huion and Wacom Tablets How To Install in Linux Mint / Ubuntu and make the stylus work properly


    It took a lot of fiddling to make a Huion Kamvas 13 Pro work in Linux but it simple once you know what to do. Don't bother searching as it is unlkely there is a guide out there that will actually make your tablet work. It mainly comes down to the fact that the hid_uclogic kernel module is buggy or doesn't support MANYof these wacom based/Huion tablets properly. What was happening with me is that Ihad the Kamvas 13 Huion setup as a secondary screen/monitor.&nb........

  • Linux How To Stop Missing Drive from Halting Boot Process in fstab


    When you automount a drive in /etc/fstab even if it's not important like an external drive that you only use sometimes and is not required for booting, it will prevent a successfuly boot. If you disable quiet mode for booting you will see something like below "A start job is running for dev-disk ...." How do we fix an fstab entry from preventi........

  • How To Replace Audio Track of Video using ffmpeg


    A very common use case is that you don't want to waste time using a video editor that requires you to open it up and manually import the video clip and audio clip, then manually delete the old audio track and import the video and new audio. That's too much work and time since we don't want to go through the hassle. ffmpeg is our solution, all we have to do is specify 3 variables and we're done! -i Windows2019-Server-Noaudio.mp4 is our in........

  • qemu-img convert formats vdi vmdk raw qcow2


    qemu-img can convert many formats. Here is an example of how to convert different images to different formats for QEMU-KVM The example above converts a raw windows2019.img file from QEMU to a Virtualbox .vdi qemu-img convert -f raw -Ovdi windows2019.img windows2019.vdi -f raw = this means the format of the source image (instead of raw it could be vdi, vmdi, qcow2 etc..)........

  • dynagen / dynamips 100% high CPU usage solution - how to set the idlepc value


    The idlepc value is very important to dynamips and it is both image and often CPU dependent. There is no "magic"value that will work for all images and all CPUs so this is why I'll show you a quick and handy way. Also don't be disappointed, some values do not work well but idlepc gives you several. For example in my example below #6 didn't help at all but #7 got me down to about 6% CPU from 99-100%. *Befo........

  • Linux Mint/Debian/Ubuntu/Centos Installer black grub screen and blank screen after trying to boot installer or main OS


    This happens to a lot of Nvidia users especially users of newer cards like the RTX series. If for example you are trying to boot and install Linux and you get a black and white grub2 screen instead of a nice graphical welcome installer, you probably suffer from this bug. It is normally followed by the user booting and finding they just have a blank/black screen. Here is the quick flow of steps to fix it: If you get a black grub scree........

  • Linux Mint Dual Boot Install Avoid Wiping our your Main C: drive /dev/sda MBR and EFI


    Before you try to install and dual boot it is very important to understand the concept of "what boot mode your BIOS is in" and "what mode you booted the installer to". Then follow the example of Linux Mint (but most Linux installers are very similar)to carefully understand WHERE you are installing your Boot Loader to whether that be MBR or EFI. How Am IBooted? First it's important to check your BIOS to see........

  • Virtualbox Error Cannot register the hard disk because a hard disk with UUID already exists solution


    Cannot register the hard disk '/some/path/windows-marking.vdi' {f54def00-2252-43f5-9178-0998636cad61} because a hard disk '/other-path/windows-marking.vdi' with UUID {f54def00-2252-43f5-9178-0998636cad61} already exists. Result Code: NS_ERROR_INVALID_ARG (0x80070057) Component: VirtualBoxWrap Interface: IVirtualBox {0169423f-46b4-cde9-91af-1e9d5b6cd945} Callee RC: VBOX_E_OBJECT_NOT_FOUND (0x80BB0001)........

  • kernel: [549267.368859] mate-terminal[7871]: segfault at 2000000101 ip 00007f5d0a9548f0 sp 00007fff7012c610 error 4 in libgobject-2.0.so.0.4800.2[7f5d0a920000+52000]


    kernel: [549267.368859] mate-terminal[7871]: segfault at 2000000101 ip 00007f5d0a9548f0 sp 00007fff7012c610 error 4 in libgobject-2.0.so.0.4800.2[7f5d0a920000+52000] This seems to be a long-time bug in Mint mate-terminal where you sometimes move or detach a terminal and it crashes losing all of the other open terminal sessions.........

  • apcupsd how to setup and monitor APC UPS units


    It really seems limited in that it can mainly give you the things you would see on the physical unit such as load etc.. wget https://downloads.sourceforge.net/project/apcupsd/apcupsd%20-%20Stable/3.14.14/apcupsd-3.14.14.tar.gz?r=https%3A%2F%2Fsourceforge.net%2Fprojects%2Fapcupsd%2Ffiles%2Flatest%2Fdownload&ts=1598115866 tar -zxvf apcupsd-3.14.14.tar.gz cd apcupsd-3.14.14 [root@somebox apcupsd-3.14.14]# ./conf........

  • How To Password Reset, Recover, Bypass, Remove and Unlock on Windows 10,8,7,Vista,XP,NT,2000,2003,2008,2012,2016,2019 Administrative Login Programs


    If you've come here, don't be embarraassed, working in IT, this is the MOST common computer problem that almost everyone will encounter. The reason why I'm doing this post is because I've seen an increase from colleagues and admins having this problem and many times it's not even your fault. A common scenario is that someone acquires a new or used computer which they weren't given the password for. Fortunately Ihave a detailed list of all the options whether free or pa........

  • Nvidia Ubuntu Linux Screentearing Video with solution driver


    This seems to happen on most if not all Nvidia cards but the good news is that if you are using any of the Linux drivers and have the nvidia-settings tool installed it is just a simple command. Solution: nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }" Enter the above command in your terminal and the screentearing will be fixed which is like enabling Tear Free on AMD cards.&........

  • ?? Question Marks for time, permissions and size of a file?


    -?????????? ? ? ? ? ? shadow ----------. 1 root root 748 Jul 10 04:35 shadow- cat: shadow: Input/output error If you see this you are probably in big trouble, it could be a physical error or if it's a VM image that it is corrupted due to a physical error on the underlying disk/array/NAS or it could a........

  • access denied by acl file qemu-kvm: bridge helper failed


    /usr/libexec/qemu-kvm -enable-kvm -boot order=cd,once=dc -vga cirrus -m 4096 -drive file=~/23815135.img,if=virtio -usbdevice tablet -net nic,macaddr=DE:AD:BE:EF:D4:AB -netdev bridge,br=br0,id=net0 qemu-kvm: -usbdevice tablet: '-usbdevice' is deprecated, please use '-device usb-...' instead access denied by acl file qemu-kvm: bridge helper failed [root@CentOS-82-64-minimal 23815135]# /usr/libexec/qemu-kvm -enable-kvm -boot order=cd,once=dc -vga cirrus -........

  • Linux NIC connecting at 100M instead of 1000M gigabit speeds? It could be overheating


    I was using a small box as a router and one of the ports started going off and coming back at 100M. I truly believe it is simply that it was a case of overheating. Although CPUtemps were only about 67 degrees, the physical box itself was almost burning hot. Isolved the cooling issue and never had the issue again. Jul 28 15:09:27 swithbox kernel: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Jul 28 15:09:28 swithbox kernel:........

  • http://vault.centos.org/5.9/os/i386/repodata/filelists.xml.gz: [Errno -1] Metadata file does not match checksum solution


    http://vault.centos.org/5.9/os/i386/repodata/filelists.xml.gz: [Errno -1] Metadata file does not match checksum yum clean all yum makecache yum update........

  • Linux Ubuntu Wifi Disabled Only Works When Laptop Plugged Into Wall AC Power


    This is very frustrating but the fix is usually easy once you read this blog. It's very frustrating when you find that your Linux / Ubuntu laptop's wifi will NEVER work unless it is plugged into the power. The wifi menu may say "Wifi disabled by hardware switch". You may find that your laptop has no switch or has a function wifi button on the keyboard but this does not work or have any effect. The cause is usual a "wmi" kernel module and simply doing an........

  • CentOS 6 impossible to compile a newer libguestfs


    yum -y install gcc make gperf genisoimage flex bison ncurses ncurses-devel pcre-devel augeas-devel augeas readline-devel checking for cpio... cpio checking for gperf... no configure: error: gperf must be installed configure: error: Package requirements (augeas >= 1.2.0) were not met: Requested 'augeas >= 1.2.0' but version of augeas is 1.0.0 yum remove augeas augeas-libs augeas-devel wget http://downl........

  • How To Get Started on Ubuntu with gpt-2 OpenAI Text Prediction


    apt install software-properties-common add-apt-repository ppa:deadsnakes/ppa apt update apt install python3-pip apt install python3.7 curl gnupg python3.7-dev git ln -s /usr/bin/python3.7 /usr/bin/python3 pip3 install numpy keras_preprocessing curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add - echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | sudo tee /etc/apt/sources.list.d/bazel........

  • Remove cloud-init in your VM


    Unless you are using OpenStack, AWS etc then cloud-init is just some bloat that slows down the booting of your VMand can actually halt it from booting if it doesn't have a proper working IP (not good!). #remove cloud init! Debian based Ubuntu / Mint sudo apt remove cloud-init RHEL / CentOS based yum remove cloud-init ........

  • QEMU-KVM KVM Command Line Practical Guide


    Iam going to build this based on a series of small howto QEMU / KVMposts I've made as I feel much of the information is actually hard to find and piece together from the rest of the web. What I'm going to focus on is how to use virtio as the NIC because if you don't you get very slow NIC speeds but with the virtio NIC model you basically get host speeds. /usr/libexec/qemu-kvm -enable-kvm -smp 8 -m 16000 -net user -net nic,model=virtio -drive file=ubuntu-gpt2l........

  • Linux How To Change NIC Name to eth0 instead of enps33 or enp0s25


    Most newer distros inexplicably cause your NIC to have what Icall "random" non-standard name conventions because of systemd. This is a big problem for many people and especially those running servers. Imagine that you have a static IPconfigured for ens33 but then the hard disk is moved to a newer system, the NIC could be anything from ens33 to enp0s1, meaning that manual intervention is required to go and update the NIC config file (eg. /etc/network/interfa........

  • Asterisk Does Not Retry When Authentication Fails


    When authentication times out that is one thing, but when it just fails like below Asterisk by default will not re-register until you the admin reload the sip or asterisk server: voipserver*CLI> sip show registry Host dnsmgr Username Refresh State&........

  • Linux Debian Ubuntu How To Install PEPPER Faster and Latest Adobe Flash Player in Firefox


    Just run this apt install command sudo apt install pepperflashplugin-nonfree browser-plugin-freshplayer-pepperflash After this restart your browser and check Adobe's site to verify if your Pepper flash is working and showing at least version 32. https://helpx.adobe.com/flash-player.html As you'll see below it will download the latest version which is currently 32 and this was not possible with the old/crappy deprecated adobe-flash plu........

  • How To Speed Up Linux Ubuntu and Debian Based Computers By Improving CPU Performance and Changing the CPU Governor


    I used to believe that for Desktops especially that the "ondemand" CPUfrequency changing that kernels included with Ubuntu and Debian based distros have would be sufficient for snappy performance. However, you can feel the lack of performance on the fastest computer if you have ondemand. A lot of times even under high load 100% of your CPUfrequency in MHz will not be used. For example a 2.8Ghz CPUmay only run at 1.8MHz or even .9GHz. Now........

  • mdadm: super0.90 cannot open /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 is not suitable for this array.


    mdadm --create /dev/md0 --level 1 --raid-devices 2 /dev/sdb1 missing --metadata=0.90 mdadm: super0.90 cannot open /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 is not suitable for this array. mdadm: create aborted Sometimes running "partprobe" can fix this. Other times it requires a reboot. One other manual thing that can be done is the following to fix it (if dm is using and blocking it):........

  • How To Install NextCloud on Centos 7 and Centos 8


    yum -y install wget unzip wget https://download.nextcloud.com/server/releases/nextcloud-18.0.2.zip unzip nextcloud-18.0.2.zip yum -y install php php-mysqlnd php-json php-zip php-dom php-xml php-libxml php-mbstring php-gd mysql mysql-server Last metadata expiration check: 0:58:02 ago on Fri 13 Mar 2020 02:12:49 PM EDT. Dependencies resolved. ===================================================================........

  • ZTE Camera Cannot Work unable to connect to camera. Camera has been disabled becaue of security policies or is being used by other apps


    unable to connect to camera. Camera has been disabled becaue of security policies or is being used by other apps They say to do a factory reset but in some cases it doesn't work and the camera mysteriously just won't work so it appears to be a hardware error if that happens.........

  • QEMU KVM how to boot off a physical CD/DVD/BDROM Drive


    It's as simple as below where you just specify the dev device of the CDROM which is usually /dev/sr0. You can boot actual bootable discs like Windows, Linux, etc straight from a physical drive this way. sudo qemu-system-x86_64 -cdrom /dev/sr0 -m 4096 ........

  • How To Install OpenProject on Centos 7 Step-by-Step Guide


    There are a few caveats that may not be obvious to everyone so I am going to cover them here but keep this in mind before starting. Before starting install epel or you will be missing tesseract: yum -y install epel-release #1) When you specify your SSL certificate with a full path, it really needs to exist where you tell it to (including the default location of /etc/ssl/certs and /etc/ssl/c........

  • Ubuntu Debian Linux Cannot Install Wine Solution - wine1.6 : Depends: wine1.6-i386 (= 1:1.6.2-0ubuntu14.2) but it is not installable wine1.4 : Depends: wine1.6 but it is not going to be installed


    If you've ever gotten errors like this the solution is simple, you need i386 enabled on your 64-bit install because wine depends on some 32-bit x86 libraries: dpkg --add-architecture i386 apt update apt install wine After that it will install just fine. apt install wine Reading package lists... Done Building dependency tree Reading state information... Done........

  • How To Install python 3.4 3.5 and up on Linux with wine - Working Solution


    This is sure simple if you follow the guide but it took a lot of hacking around to make this work on Debian/Ubuntu! Now before you ask why bother running wine and python, the reason is because Python executables are NOT cross-platform. If you run pyinstaller in Linux, that binary will only run on Linux and the same if you do it in Windows. So it is preferable if you have a single environment that you can create Linux and Windows binaries from rather than running 2 separate........

  • using Xvfb on virtual remote ssh server to have X graphical programs work


    The scenario here is that you have some sort of remote headless Linux server but would like to run some programs on them and get graphical access to them. The problem is that the remote server may be an image or VMwithout any virtual GPU and even if so, it is likely without KDE or Gnome, so there's no real way to do this, unless you follow our guide. Install xvfb apt install xvfb Reading package lists... D........

  • named bind errors - DNSKEY: unable to find a DNSKEY which verifies the DNSKEY RRset and also matches a trusted key for '.'


    Mar 22 13:46:14 box named[31767]: validating @0x7f51bc001550: . DNSKEY: unable to find a DNSKEY which verifies the DNSKEY RRset and also matches a trusted key for '.' Mar 22 13:46:14 box named[31767]: validating @0x7f51bc001550: . DNSKEY: please check the 'trusted-keys' for '.' in named.conf. Mar 22 13:46:14 box named[31767]: error (broken trust chain) resolving './NS/IN': 192.36.148.17#53 One possibility is sometimes that your time is ou........

  • httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load modules/libphp5.so into server: /lib64/libresolv.so.2: symbol __h_errno, version GLIBC_PRIVATE not defined in file libc.s


    httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load modules/libphp5.so into server: /lib64/libresolv.so.2: symbol __h_errno, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference This is usually caused by a mismatch in OpenSSLversion. Interestingly enough a lot of times if it has happened during an update of your system, or after, usually just restarting httpd........

  • Radeon R3 GPU on Debian Crashing


    Occasionally my whole screen locks up and I cannot even swith to the console and I find this in my syslog: *-display description: VGA compatible controller product: Mullins [Radeon R3 Graphics] vendor: Advanced Micro Devices, Inc. [AMD/ATI]  ........

  • MySQL 5.7 on Debian and Ubuntu - How To Reset Root Password


    MySQL on Debian versions is configured differently than the native local MySQL plugin so you will be disappointed when your password on the mysql client fails by default. Here is how you reset the MySQL root password the proper and "working way" #first we gracefully stop mysql sudo systemctl stop mysql; #then we forcefully kill any mysqld process just in case sudo killall -9 mysqld mysqld_safe;........

  • SSH and sshfs timeout settings keepalive


    A big problem over ssh and especially sshfs is that your connection will often timeout and disconnect after inactivity. To fix this you can modify the server but it may not be practical or you may not have access. Why not send keep alives fom your end (client side)? Just edit /etc/ssh/ssh_config (not to be confused with sshd_config as that is the server side): Find the line that says "Host *" and change it like this:........

  • Howto Set Static IP on boot in initramfs for dropbear or other purposes NFS, Linux, Debian, Ubuntu, CentOS


    This is only really necessary in the case you don't want DHCP. If you are dealing with an encrypted LUKS server on the internet, you will often want to have a static IP so you know which IP to connect to (or if you have a semi-static IP assigned by DHCP). SET IP Address by /etc/initramfs-tools/initramfs.conf IP Address=192.168.1.27 Gateway=192.168.1.1 Subnet Mask: 255.255.255.0 Hostname=myhome.com IP=192.1........

  • Convert and install to LUKS Encrypted Drive Ubuntu 18.04 19.10 Linux Mint and Debian Based Linux


    The reason for doing this is that the installer doesn't seem to work properly for LUKS and the server installer doesn't even support LUKS anymore. When you use the GUI install on Desktop for LUKS it won't boot and will just hang after you enter your password. So the only reliable way is to do it ourselves. 1.) Make a default minimal install of Ubuntu 2.) Have a secondary disk on the server or VM. 3.)........

  • Debian and Netplan


    Create your netplan file vi /etc/netplan/01-netcfg.yaml network: version: 2 renderer: networkd ethernets: ens3: dhcp4: no ........

  • CentOS 8 RHEL 8 Alma Linux Rocky Linux how to restart the network!


    Yes you have that right, the network service in RHEL8 / CentOS 8 / Rocky Linux / Alma Linux no longer exists. So there is no more systemctl restart network You can restart NetworkManager but it doesn't have the same effect or ifup/ifdown on all interfaces. Generally if NetworkManager is installed you will want to restart it or it won't apply the settings from ifcfg. systemctl restart NetworkManager To repl........

  • CentOS 8 how to convert to a bootable mdadm RAID software array


    The cool thing here is that we only need 1 drive to make a RAID 10 or RAID 1 array, we just tell the Linux mdadm utility that the other drive is "missing" and we can then add our original drive to the array after booting into our new RAID array. Step#1 Install tools we need yum -y install mdadm rsync Step #2 Create your partitions on the drive that will be our RAID array Here I assume it is /dev........

  • ADATA USB Thumb Drive Issues


    This is the reason that I don't like the new ADATA USB drives such as the UV128/64GB or 128GB drives and other ones that look to be the same style (the green sliding USB connector). They just don't work well from new and never work properly at any point. [ 788.242463] usb 1-1.2: new high-speed USB device number 16 using ehci-pci [ 788.339816] usb 1-1.2: New USB device found, idVendor=125f, idProduct=db8a [ 7........

  • KMODE EXCEPTION NOT HANDLED - QEMU/KVM Won't Boot Windows 2016 or 10 Image or Physical Machine


    This should work but the key thing is having the "-cpu host" flag. Once you add the correct -cpu host flag then it should boot just fine on KVM. qemu-system-x86_64 --enable-kvm -cpu host -smp 8 -m 8192 -drive format=raw,file=the-file.img Examples can be found here on how to boot Windows properly with KVM.........

  • Linux Mint / Ubuntu / Debian Mate Disable Guest Session and Hide Usernames on Lightdm Login screen GUI


    sudo vi /etc/lightdm/lightdm.conf.d/70-linuxmint.conf Change this: [SeatDefaults] user-session=mate allow-guest=false To this: [SeatDefaults] user-session=mate allow-guest=false greeter-hide-users=true greeter-show-manual-login=true To see and apply your changes just restart light........

  • SSH How To Create Public/Private Key Pair and with a Larger Keysize than 2048 bits


    The problem is that by default ssh-keygen loves to generate an easy to crack 2048 bit key (RSA). Supposedly having a larger keysize helps such as 4096 or 8096 but it is thought to be useless still against Quantum computing. How can I check my existing keysize and type? ssh-keygen -lf /path/to/your/id_rsa.pub The output will be something like below followed by the hash. The first number is the key size and the second part will b........

  • ssh how to connect using a SOCKS 5 proxy with nc and proxycommand


    This is not about using ssh as a proxy, but rather, using a proxy when you are SSHing to another host and using ProxyCommand (where we normally use nc as our proxy tool). In newer versions of nc the syntax has changed to the following: ssh -o ProxyCommand="nc -x 127.0.0.1:1234" %h %p user@host The format must be like above in newer nc versions. Just be sure to change the 1234 to the port of your SOC........

  • how to use ifplugd in Linux to execute a command or script when a NIC cable is unplugged or plugged in


    It is fairly simple to use once you know how to use it. However, the tricky thing is that by default it doesn't seem to be active or listen on any interface on manually specified. How To Install ifplugd First we install ifplugd sudo apt install ifplugd Let's enable it on our desired device(s) vi /etc/default/ifplugd set this line as so:........

  • mpv / mplayer with Radeon / AMD GPU Video Card Driver enable VDPAU GPU Accelerated Video Decoding


    The easiest way to know if your videos are playing with GPU acceleration are to watch the process of xplayer, mpv or whatever you are playing. The CPU usage should be no more than 10% for that process/program if it is using acceleration. Let's manually play with vdpau to make sure it works before we make it permanent: First make sure you have libvdpau installed: sudo apt install vdpau-driver-all If yo........

  • Wordpress Reset Blog User Password from MySQL Using Linux Bash and not PHPMyadmin


    The reason we use the command below is because we need the md5sum value hash of the password. This means that we cannot use the md5sum Change "yournewpass" to the pass you want to set echo -n "yournewpass" | md5sum Then you get the md5sum hash of whatever you entered eg. in this case "yournewpass" 5a9351ed00c7d484486c571e7a78c913 ........

  • Ubuntu Linux Mint Debian xorg performance and tear-free tuning for AMD Radeon Based Cards


    I find that the default settings for the radeon driver that is applied to most AMD cards is horrible. For example by default TearFree is not enabled and it causes videos to have some kind of square artifacts. Here are the settings I have found most suitable for AMD cards: You need to create file in the following path and restart Xorg or your computer to apply it: *Beware that making a mistake here will possibly make your computer........

  • MariaDB / MySQL Reset Root Forgotten Password on Centos 7


    mysql reset root password. Oops I can't remember my MySQL root password! [root@centos7test etc]# mysql -u root -p Enter password: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) First we need to stop mariadb: systemctl stop mariadb Now we need to restart it with skip-grant-tables whic........

  • Centos 7 How to install Mysql/Mariadb


    yum -y install mariadb-server systemctl start mariadb mysql_secure_installation Now we need to secure our install and set the MariaDB root password: The lines you need to act on are marked in bold shown with the answer you need. mysql_secure_installation NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB SER........

  • PHP 7.2, Apache and Centos 7 How To Install


    yum install centos-release-scl yum install rh-php72 rh-php72-php rh-php72-php-mysqlnd Symlink PHP binary: ln -s /opt/rh/rh-php72/root/usr/bin/php /usr/bin/php Symlink Apache and PHP module config: ln -s /opt/rh/httpd24/root/etc/httpd/conf.d/rh-php72-php.conf /etc/httpd/conf.d/ ln -s /opt/rh/httpd24/root/etc/httpd/conf.modules.d/15-rh-php........

  • Ubuntu Debian Linux Mint r8169 r8168 Network Driver Problem and Solution


    This problem has been around forever, Linux seems to think it is fine to use the r8169 driver for an r8168 NIC but this often causes problems including the link not working at all. In my case ethttool shows the link up and detected but it simply does not work especially on a laptop that has been resumed from suspension. Sometimes it takes several minutes for it to work or to unplug and replug the ethernet. Here is the solution: Install th........

  • How To Install Asterisk 16 17 on Debian Ubuntu Linux


    Downloading and compiling from source to get the latest version of Asterisk is really simple with this guide. apt install gcc make g++ libedit-dev uuid-dev libjansson-dev apt install libxml2-dev sqlite3 libsqlite3-dev wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-16-current.tar.gz tar -zxvf asterisk-16-current.tar.gz cd asterisk-16.6.2/ ./configure If you get this error change y........

  • Cannot Print PDF Solution and Howto Resize


    If you can print other PDFs but not a particular one it is very likely that the PDF size is A4 (the longer, skinnier Asian paper size) instead of the North American letter size ( 8.5" x 11"). This breaks printing in most cases. Or it may print if you find a program that ignores the size issue. Here is an example of an A4 being rejected by a printer in Ubuntu Linux via CUPS Cannot print PDF CUPS Samsung C460: Processin........

  • Linux Console Login Screen TTY Change Message


    This is all controlled by /etc/issue You can basically enter anything in there that you like, but there are preset variables that are mentioned at the end of the page that discuss this. Some examples of /etc/issue: Centos 7: S Kernel r on an m Ubuntu 16.04: Ubuntu 16.04.6 LTS n l You can also insert any of t........

  • MySQL Bash Query to pipe input directly without using heredoc trick


    Most of us know the heredoc method but what if you need a basic query done repeatedly and manually while working from bash? It is a pain to manually type mysql and login each time. With this command below you can semi-automate those queries: echo "use somedb; select * from auctions" | mysql -u root --password="yourpassword" Just modify the above to suit your needs and you can add more queries by adding a sem........

  • CentOS 6 and 7 / RHEL Persistent DHCP Solution


    It is very silly but the default on the ifup-eth script tells dhclient ( the program that obtains a DHCP IPaddress if you have selected DHCPin your ifcfg-eth* config file) to EXIT / QUIT if the first attempt to obtain a lease fails. No amount of dhclient.conf settings will fix this because if dhclient is started with -1 (which it is by default)then dhclient will quit. This is obviously very bad for MOST cases. Say for example you have a power outage or........

  • Debian Ubuntu Mint rc-local service startup error solution rc-local.service: Failed at step EXEC spawning /etc/rc.local: Exec format error


    Oct 18 11:06:46 server systemd[529]: rc-local.service: Failed at step EXEC spawning /etc/rc.local: Exec format error Oct 18 11:06:46 server systemd[1]: rc-local.service: Control process exited, code=exited status=203 Oct 18 11:06:46 server systemd[1]: Failed to start /etc/rc.local Compatibility. Oct 18 11:06:46 server systemd[1]: rc-local.service: Unit entered failed state. Oct 18 11:06:46 server systemd[1]: rc-local.service: Failed with result 'exit-code'.........

  • MySQL Cheatsheet Guide and Tutorial


    Create Database: create database yourdbname; Show All Databases: show databases; Change Database: use mysql; Drop / Delete a MySQL Database: drop database nameofyourdatabase;........

  • Linux tftp listens on all interfaces and IPs by DEFAULT Security Risk Hole Solution


    Just edit your tftp file for xinetd like this: *Change the IPto be the IPof the interface you want to listen on. To test if your tftp is available on a certain IP range use nc -u yourip 69 to see if you can still connect (/var/log/messages or /var/log/syslog) should show the connection if it is open. Oct 13 23:20:34 01 xinetd[26631]: Started working: 1 available servic........

  • python import docx error


    sudo pip3 install python-docx [sudo] password for : Downloading/unpacking python-docx Downloading python-docx-0.8.10.tar.gz (5.5MB): 5.5MB downloaded Running setup.py (path:/tmp/pip_build_root/python-docx/setup.py) egg_info for package python-docx no previously-included directories found matching 'docs/.build' warning: no previously-included files matching '.DS_Store' foun........

  • Cisco Unified Communications Manager Express Cheatsheet CUCME CME Tutorial Guide


    Video Links: How To Setup 2 Phones on a Single CME Router and get the GUI going. How to use Dialpeers with CME with two routers How to implement call restrictions using COR / Class of Restriction Getting started, let's enable ephones and DNs we can add a phone with........

  • Linux Ubuntu Debian Missing privilege separation directory: /var/run/sshd


    service sshd status ● ssh.service - OpenBSD Secure Shell server Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enabled) Active: failed (Result: start-limit-hit) since Wed 2019-10-02 11:07:54 EDT; 36s ago Process: 476 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=255) Oct 02 11:07:54 box systemd[1]: Failed to start OpenBSD Secure Shell server. Oct 02 11:07:54 box sys........

  • bash how to count the number of columns or words in a line


    This is just if we have an output line. wc we know can count lines but the -w flag will count words: echo "Ihave this line here" |wc -w 5........

  • bash if statement how to test program output without assigning to variable


    A common method in bash is to assign output to a variable like this: somevar=`uptime` That works too but it could be more efficient to do something like this: if [[ $(uptime|awk '{print $3}') > 20 ]]; then echo "uptime greater than 20 days"; fi........

  • RTNETLINK answers: Network is unreachable


    This often happens if you are adding a secondary route, especially with Linux source based routing. ip route add default via 10.10.10.254 table 10 RTNETLINK answers: Network is unreachable If that happens you will probably find that it is unreachable because your NIC does not have an IP in the 10.10.10.0/24 range so just assign an IP in that range to your NIC and try again. eg. ifconfig eth0 10.10.10.254 netmask 255.255.255.0 up........

  • Centos 7 how to save iptables rules like Centos 6


    yum install iptables-services systemctl enable iptables service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ]........

  • nfs tuning maximum amount of connections


    By default at least on Centos 7 nfs only allows 8 connections and starts 8 nfsd daemons. To fix this edit this file:/etc/sysconfig/nfs Edit the line "RPCNFSDCOUNT" (uncomment it so it looks like this: RPCNFSDCOUNT=30 In the example above we are setting 30 nfsd daemons to run (or in other words 30 connections are possible this way).........

  • qemu-kvm error "Could not initialize SDL(No available video device) - exiting"


    Now older versions of qemu-kvm didn't throw this error say if you just had "-video cirrus" when starting qemu-kvm. But newer versions do care. And this probably only applies to you if you are running from bash/terminal with remote kvm images. What you need to do is remove the "-video" part and just add -vnc :5 eg. this would fix the error: qemu-system-x86_64 -enable-kvm -boot order=cd,once=dc -m 1024 -drive........

  • Centos 7 tftpd will not work with selinux enabled


    In Centos 7 tftpd will not work with selinux. Clients will not be able to connect and this is all you'll see in the log (then nothing more): Sep 18 14:39:15 localhost xinetd[4327]: START: tftp pid=4331 from=192.168.1.65 On the client/computer side you will see this: TFTP. PXE-M0F: Exiting Intel Boot Agent Basically the client is being instantly connected and bloc........

  • Debian Ubuntu Mint Howto Create Bridge (br0)


    Having a network bridge allows you to bridge traffic under multiple devices so they can talk natively without using any special routing, iptables/firewall or other trickery. To create your bridge you need the bridge-utils package for brctl and if you want to do things like bridge VMs that run on a tap device you will need the uml-utilities which provides "tunctl". 1.) Install the utilities to make our bridge sudo apt-get i........

  • How To Control Interface that dhcpd server listens to on Debian based Linux like Mint and Ubuntu


    By default your DHCP will often not work because it is not listening on any interfaces. All you have to do is edit this file: vi /etc/default/isc-dhcp-server then find the "INTERFACES" line and add each interface that should listen: INTERFACES="br0 enp0s10" ........

  • Debian Ubuntu and Linux Mint Broken Kernel After Date - New Extra Module Naming Convention


    I don't consider a lot of these "extra" kernel modules "nice to have" as they often contain drivers for essential items like your soundcard, your NIC and many other devices that may not work. Sometimes you may find that "sound" or "ethernet" worked before a kernel/OS upgrade and now in the new version they don't. Often it will be because you need to install the "extra" kernel modules. One other weird thing is that sometimes........

  • Apache htaccess and mod_rewrite how to redirect and force all URLs and visitors to the SSL / HTTPS version


    It is really simple using .htaccess with mod_rewrite. Here is all you need: RewriteCond %{SERVER_PORT} 80 RewriteRule ^(.*)$ https://site.com/$1 [R=301,L] Another more graceful way is to use the %{SERVER_NAME}variable to make it dynamic. Just be careful that the server name will always match what you expect. (eg. if you are doing load balancing or clustering what if the server name may be somethi........

  • python 3 pip cannot install mysql module


    python3 testserver.com-car-scraping.py html.txt Traceback (most recent call last): File "testserver.com-car-scraping.py", line 5, in import mysql.connector ImportError: No module named 'mysql' For some reason it won't install properly even though I have the mysql client on this machine installed too. Solution: You need the mys........

  • QEMU-KVM won't boot Windows 2016 or 2019 server on an Intel Core i3


    CPU:Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz MOBO: Manufacturer: ASUSTeK COMPUTER INC. Product Name: P8H61-M LX3 PLUS R2.0 qemu-kvm-0.12.1.2-2.506.el6_10.1.x86_64 This is weird but the only OS I've found this machine doesn't work with is Windows 2019 Server. Ihave no idea, when 2008, 2012 work f........

  • Virtualbox vbox not starting


    If you've just installed VBox and it is not starting or working, the most common problem is usually that you don't have your kernel source installed, which means there is no kernel driver for vbox so it can't work. You may get an error that says "Kernel driver not installed" in your Virtualbox. So the first thing you should do is install your kernel source by running this: sudo apt-get install linux-headers-`uname -r`........

  • Bind / named not responding to queries solution


    By default bind will not respond to outside queries for security reasons. In most distributions you will find the default in /etc/named.conf looks like this at the top under options: listen-on port 53 { 127.0.0.1; }; listen-on-v6 port 53 { ::1; }; directory "/var/named";........

  • Linux Mint How To Set Desktop Background Image From Bash Prompt CLI


    The way of doing it in mint is different than gnome and ubuntu. gsettings set org.mate.background picture-filename /path/to/file.jpg *If you try to use the gnome way it will NOT work with Linux Mint: gsettings set org.gnome.desktop.background picture-uri /some/pic.jpg........

  • ImageMagick Convert PDF Not Authorized


    You'll have to edit the policy.xml file to fix this: convert -density 300 output.pdf agreement.jpg convert.im6: not authorized `output.pdf' @ error/constitute.c/ReadImage/454. convert.im6: no images defined `agreement.jpg' @ error/convert.c/ConvertImageCommand/3044. sudo vi /etc/ImageMagick*/policy.xml Change policy domain="coder" rights="no........

  • Linux Mint Mate Customize the Lock screen messages and hide username and real name


    This is a security hole in my opinion and should be plugged by editing the lock screen ui layout: vi /usr/share/mate-screensaver/lock-dialog-default.ui #find these objects and set the visible property to false object class="GtkLabel" id="note-tab-label" object class="GtkLabel" id="auth-username-label> object class="GtkLabel" id="auth-realname-label"........

  • Ubuntu/Gnome/Mint/Centos How To Take a partial screenshot


    By default printscreen or alt print screen will get the whole desktop or the application in focus, respectively. But what if you want to select a portion of the screen? gnome-screenshot: ksnapshot compiz This is a nicely integrated solution sudo apt-get install compizconfig-s........

  • ssh how to verify your host key / avoid MIM attacks


    SSH helps keep us secure in many ways, one of those is the host-key fingerprint which is unique. If you have been connecting to an SSH server that you've made no changes to and suddenly ssh warns that the key doesn't match then you have a problem. But how about connecting to an existing server for the first time on a new machine or client? A lot of new clients calculate it using an SHA256 hash but it is not as easy on your host machine to produce the sam........

  • Cisco IP Phone How To Reset To Factory Settings Instructions CP 9971, 8800, 8900, 8845, 8851, 8841, 8831, 7961, 7960, 7945, 7942, 7941, 7940.


    This would be crucial especially if the phone is hardened, not being able to reset or change settings could prevent a phone registering in a new environment or even when migrating from office to office. This applies even if you are trying to migrate the phone to another platform such as Asterisk/FreePBX etc... This guide applies to nearly all of the Cisco IP phones that you would use in CME or CUCM from several years ago including models: 9900, 9971, 8800, 8900, 8845, 8851, 8841........

  • Cisco Unified Communications Manager / CUCM IP 8.6,10,12 Install Error Solution


    Install Errors on Version 12: This error happened on QEMU emulator version 2.11.1 pve-qemu-kvm_2.11.1-5 on Proxmox/Debian but installing on QEMU.12 on Centos 6 did not produce the error. *Update it is not related to the OS or QEMU version. This happened in Centos 6 too after a second install. What really causes this even though you successfully install........

  • Ubuntu Debian Mint Linux SSHD OpenSSH Server Not Starting After Reboot Solution


    If you get error messages like this it is usually because /var/run/sshd does not exist. root@userbox:/# service sshd status ● ssh.service - OpenBSD Secure Shell server Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enab Active: failed (Result: start-limit-hit) since Wed 2019-04-10 02:24:44 EDT; 1 Process: 511 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=255)........

  • Windows 7,8,10 and Server 2008, 2012, 2016, 2019 Read Only Attribute Won't Go Away


    I have seen this in a few rare cases after a reboot, where all folders and files will have the Read Only Attribute. If you uncheck it, it will just come back. It is more of a filesystem issue in Windows than a configuration issue and it looks like when Windows detects a badly corrupted filesystem that it will make things read-only, sort of like Linux would. If you are Administrator or the owner of the folder and this is happening it is probably due to the reasoning mention........

  • bind / named how to make a wildcard record and retain defined A records


    It is almost as intuitive as we would like it is just a *. So literally: *INA 127.0.0.1 Complete working bind zonefile below: $TTL 86400 @ IN SOA ns.rtt.ca. ns2.rtt.ca. ( 1247605715; Serial &n........

  • Cisco Unified Communications Manager 12 Install Errors on Proxmox/KVM


    The strange thing is that usually the first install or two will work on any new machine but then it suddenly won't. I had this experience on QEMU 2.13 on a different machine. There is something finicky or buggy about the CUCM installer even when choosing the same virtual hardware specs. qemu-kvm command: /usr/libexec/qemu-kvm -version QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2-2.506.el6_10.1), Copyright (c) 2003-2008 Fabrice Bellard ........

  • Local Vs Universally Administered MAC Address NIC Refuses to come up


    2,6,A or E is what the second digit of your MAC address must be otherwise a lot of OS's will not work. They will say the NIC is down/not connected even though it is. This is because if the second digit is not set properly it will not view as a valid MAC or device uplink. This is especially an issue with VMs whether in QEMU etc.. if you are making your own MAC. MAC address is invalid c4:d1:aa:e5:10:05 To fix it just........

  • Cisco Unified Communications Manager 12 CUCM 12 - How To Enable Video Calling


    There are multiple layers but most are enabled by default such as the setting in the Phone Device Settings. However the one not enabled by default is the one in "Enterprise Phone Configuration". Enable "Cisco Camera" and then reboot your phones to enable it.........

  • Windows 7, 8, 10, Windows Server 2008, 2012, 2016, 2019 How To AC97 Audio Drivers and Other Unsigned Drivers


    Oops did you get this error trying to install an oldschool driver and think it is hopeless in a new version of Windows? First of all it is almost never a program compatibility issue: ........

  • tftp Linux xinetd verbose logging


    It is much more useful to have meaningful and detailed logging from tftp to see what is or isn't happening especially for VOIPand other embedded device appications: Edit the file: vi /etc/xinetd.d/tftp Change the server line like this: server_args = -s /var/lib/tftpboot........

  • Linux delete unused tap devices automatically


    This will find all tap devices and try deleting all of them. Of course don't run this if there is a chance an unused tap device is necessary and would not be created by the script ro application using it. for tap in `ifconfig -a|grep tap[0-255]|awk '{print $1}'`; do tunctl -d $tap done........

  • QEMU-KVM Windows and Server Guest Installs Mouse Tracking Pointer Location Solution


    You may have noticed if you are running QEMU/KVMmanually that in Windows the the position of the physical mouse does not match where the mouse is positioned within Windows. There is an easy command to pass to qemu-kvm or qemu-system (whatever you call your binary): -usbdevice tablet The above flag will fix your mouse pointing problems whether you are running Windows 95, 98, NT, XP 2000, 2003, Vista, 7, 8 10 or Server 2000, 2003, 2008, 2012, 2016 or 2........

  • SSH Keep Alive To stop Disconnections


    Are you tired of coming back to your computer only to find your SSH connections have been broken? Even worse are the ones that hang where it appears to be connected but it is really not. The one option you have is an SSHclient side modification to send KeepAlive packets, sometimes this can also keep up your WiFi connection and stop it from disconnecting you as well. To make the keep alive changes for your just yourself (not system wide)........

  • Linux How To Disable SATA NCQ For Better Performance


    This is the closest way to disabling it without using the "libata.force=noncq" kernel boot option is to set the queue to a depth of 1 which doesn't actually disable it. Change the sdc below to match the device you want to disable NCQ for. [root@officebox ~]# echo "1" > /sys/block/sdc/device/queue_depth Errors that indicate you are having a performance issue are these in messages or dmesg relating to N........

  • the sign-in method you're trying to use isn't allowed. For more info, contact your network administrator - solution for active directory


    This is usually because the Group Policy forbids that user or group from logging in. run "gpmc" (not "gpedit.msc" as that is for local computer settings when you are not using Active Directory) or go to Administrative Tools and Group Policy Management. Edit the default domain policy like below........

  • gsmartcontrol for Windows to Check the SMART S.M.A.R.T status


    gsmartcontrol is a free tool that let's you see the status of the SMART parameters so you can check things like temperature, reallocated sectors, bad sectors etc.. to give you a better idea of your drive health. Download it here. gsmartcontrol is a very useful tool in Windows to check your HDD / Hard Drive health status. In my experience you should NEVER trust that everything is OK just because SMAR........

  • qemu-kvm qemu-system Image format was not specified for '/mnt/space/cucm12.img' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'ra


    WARNING: Image format was not specified for '/mnt/space/cucm12.img' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'raw' format explicitly to remove the restrictions. #you should manually specify the format q........

  • Centos 6 or 7 no DHCP IP during startup on first boot or reboot solution


    This is usually because of STP causing a delay in the negotiation. Edit your ifcfg script eg: /etc/sysconfig/network-scripts/ifcfg-eth0 Add a LINKDELAY of 30 seconds or whatever works for you: LINKDELAY=30 After that you should have an IP during bootup.........

  • Debian / Mint / Ubuntu net-tools packages provides netstat, ifconfig, route, arp and other classic network admin tools


    The net-tools command brings back all of the oldschool tools that we're used to: /bin/netstat /sbin/ifconfig /sbin/ipmaddr /sbin/iptunnel /sbin/mii-tool /sbin/nameif /sbin/plipconfig /sbin/rarp........

  • Linux bash prompt why does it not show username@host and the current directory?


    Perhaps you've just seen this in the bash prompt: -bash-4.1# Instead of the expected user@hostname# It is probably because you are missing .bash_profile or .bashrc in your home directory Check for yourself: ls -al ~/|grep -E ".bash_profile|.bashrc" -rw-r--r--. 1 root root&nbs........

  • How to install and setup LXC Containers (OpenVZ alternative) on Centos 6 / 7


    If you don't aleady have it, you'll need EPEL Install LXC yum -y install lxc lxc-templates Loaded plugins: fastestmirror Setting up Install Process Loading mirror speeds from cached hostfile * base: mirror.it.ubc.ca * epel: mirrors.kernel.org * extras: mirror.it.ubc.ca * updates:........

  • Cisco CUCM Unified Communication Manager Howto Guide and Tutorials


    Install Issues: How to Make CUCM iso /modify to work on non-VMWare machines like QEMU/Xen/OpenStack If you get kernel panic errors in VBOX usually disabling Nested Paging will fix the issue (thanks to Mark). ks_pre.sh error is caused by having the wrong VDX pattern (change it do sd per guide link above) and/or the wrong VMSpecs (Cisco req........

  • How To Use Letsencrypt SSL/TLS Encryption to Create Certificates without installing on the target machine


    For some reason, perhaps you don't want to run a daemon or let Letsencrypt have access to your production server. There is a way to use it like a normal CSR/CA setup in manual mode. ./letsencrypt-auto certonly --manual -d realtechtalk.com - www.realtechtalk.com   Eventually you will get prompted to create a certain path and file with certain data: Create a file containing just this data: Casdfasfadsfsad........

  • Cisco Router Setup Guide and Tutorial Howto With Commands and Examples


    In most of the Cisco router IOS I find the ports like ge0/0 ge0/1 and ge0/2 or whatever your ports are down. They will not even give you a link light. So one of the first tasks should be getting the port you are working with up. In my case the first goal is often connectivity with the LAN and WAN. LAN = your local area network (eg. in the office/home ) WAN= your ISP/public internet (eg. fiber/cable/dsl/ethernet).........

  • Linux Bash Script To List All Connected IPs and their network name


    for ip in `netstat -nt|awk '{ print $5 }'|cut -d ":" -f 1|tail -n +3|sort|uniq`; do echo $ip;whois $ip|grep -i netname;echo "---------------------------" done 77.88.47.40 netname: YANDEX-77-88-47 --------------------------- 40.77.167.5 ------........

  • Cisco Switches How To Get Of Port Line Status Console Messages


    00:55:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down 00:55:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up Switch(config)#no logging console ........

  • Cisco DHCP Snooping Relay Setup Information


    Switch#show ip dhcp snooping Switch DHCP snooping is disabled DHCP snooping is configured on following VLANs: 1 Insertion of option 82 is enabled circuit-id format: vlan-mod-port remote-id format: MAC Option 82 on untrusted port is not allowed Verification of hwaddr field is enabled Interface&nb........

  • Cisco Switch Setup Guide Command List


    Enter configuration console: enable configure terminal This is important because if your console doesn't look like below none of the commands will work! Switch(config)# Save and Apply Settings wr Show Switch Configuration: show run Show Port List/Sta........

  • Cisco Switch Reset To Factory Defaults


    This works on the 2000 and 3000 series generally. *The easy way is to just hold the mode button for 10+ seconds. The full/proper way is below: 1.) Either power on the unit and hold the "mode" button or hold the "mode" button until you see the below: 00:04:08: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram 00:04:08: %EXPRESS_SETUP-6-CONFIG_IS_RESET: The configur........

  • How To Boot Cisco CUCM UCSInstall 8.6, 10, 11 and 12 on KVM/Proxmox


    The key thing is that you must use a "machine"id of "pc-1.3" or it will say your hardware is not supported. Additionally you MUST use a virtio disk or you will get a ks_pre.sh error as soon as the install starts (a look at logs will show it can't find a disk). This is funny because even though the OS finds the disk and an fdisk -l shows it, it looks like the script looks for a /dev/vda device (virtio) and nothing else, so if you didn't use Virtio as you........

  • VBOX VirtualBox How To Import Raw .img Disk File


    What you need to do if you have taken a dd or real raw image dump of a hard disk: VBoxManage convertdd windows2019-eval-template.img windows2019.vdi --format VDI The .img is the raw dd dump and the .vdi is the output file. --format VDIspecifies to output to .vdi format If you are in a pinch you can always use qemu-kvm binary and manually specify the .img as your disk and i........

  • Windows Server 2012, 2016, 2019 How To Install and Missing Disabled Telnet Client


    By default telnet is not enabled or installed on the latest Windows servers so you'll get an error saying: telnet is not recognized as an internal or external command dism /online /Enable-Feature /FeatureName:TelnetClient ........

  • proxmox vm networking breaks when you restart your network on the hostnode


    Idid a systemctl restart networking and it broke Proxmox VM connectivity! #proxmox is the problem after restarting the network the tap devices go to disabled state [2230884.919905] vmbr0: port 7(tap118i0) entered disabled state [2230884.948864] vmbr0: port 8(tap122i0) entered disabled state [2230884.972748] vmbr0: port 6(tap119i0) entered disabled state [2230885.004745] vmbr0: port 5(tap117i0) entered disabled state [2230885.03673........

  • LUKS Hard Drive Encryption on Linux Mint Ubuntu Debian etc how to mount encrypted hard drive


    The key thing here is to know the actual partition that is encrypted. Often in Linux Mint's installer that ends up being partition 5 or /dev/sda5 sudo cryptsetup luksOpen /dev/sda5 anynamehere You will then be prompted for your irrecoverable passphrase: Enter passphrase for /dev/sda5: If all goes well it won't say anything further. If it says ""No key available with this passphr........

  • How to use nmap locate other machines/computers/servers on your network using nmap


    A lot of people think arp wil do it but the arp table will only show devices you have communicated with. Using nmap is a quick and simple way to scan a range to find a machine you may not know the IP for: eg: nmap -sP 10.1.5.0/24 Just change the above to your subnet........

  • Linux Mint 18.2 Create Config File To Start Application Upon Login


    This is not about systemd/systemctl and not about "onboot" so there's no rc.local trick here but it's the GUI/Gnome etc when a user logs in that a command is launched. Put this in your home dir The .config/autostart directory is where Linux Mint/Ubuntu checks for autostart application config files mkdir -p ~/.config/autostart Create a new entry/file that starts an application........

  • sudoers file in /etc warning about comments/includes!


    If you see this in /etc/sudoers it is NOT a comment but an include. #includedir /etc/sudoers.d For example in Linux mint sudoers.d contains the following files: casper mintupdate README casper for example contains the following sudoers line: mint ALL=(ALL) NOPASSWD: ALL So if you are messing ar........

  • Centos 7 Reallocate logical volume space to another


    Do you hate how Centos 7 defaults to allocating most of your valuable space to /home even though it is a production server? Here is a quick guide on how to take back that space live, while online (of course make sure you have backups just in case something goes wrong!): First we will reduce our home dir by 100G: lvreduce -L -100G /dev/mapper/centos-home WARNING: Reducing active and open logical volume to ........

  • letsencrypt certbot error "Unable to find a virtual host listening on port 80 which is currently needed for Certbot to prove to the CA that you control your domain. Please add a virtual host for port 80."


    ./certbot-auto --apache certonly Saving debug log to /var/log/letsencrypt/letsencrypt.log Plugins selected: Authenticator apache, Installer apache No names were found in your configuration files. Please enter in your domain name(s) (comma and/or space separated) (Enter 'c' to cancel): yourdomain.com Obtaining a new certificate Performing the following challenges: http-01 challenge for yourdomain.com Cleaning........

  • SSH error cannot Forward or Listen "bind: Cannot assign requested address"


    debug1: Local connections to LOCALHOST:18006 forwarded to remote address 192.168.1.93:8006 debug1: Local forwarding listening on 127.0.0.1 port 18006. debug1: channel 0: new [port listener] debug1: Local forwarding listening on ::1 port 18006. bind: Cannot assign requested address What we are seeing is that we can't listen on an IPV6 address of ::1. We need to tell SSH to stop using IPV6 so we'll edit ssh_config to take care of this issue........

  • X11 SSH Linux Forwarding Error


    Jan 30 17:16:10 localhost sshd[25385]: error: Failed to allocate internet-domain X11 display socket. The solution for me on the server side was the following in sshd_config: AddressFamily inet *Remember to restart sshd and also reconnect from the client side. Ihad all the normal X11 settings on the server but it just stopped........

  • Using Microsoft's Group Policy Management Editor (GPME) To Change Default Permissions and Internet Explorer Security Settings


    The defaults in Windows 2016 server leave clients crippled so they can't even download basic files or software. But Group Policy Management Editor comes to our rescue! Use cmd or Powershell and run: gpme.msc Choose your domain/computer and then navigate like below and create a new menu entry for IE11 or whatever your version is. Don't be worried if the highest version is IE10 it means that it applies to IE10 AND above.........

  • Thunderbird How To Disable An Email Account


    Navigate to Tools -> Account Settings -> Server Settings Uncheck the following: "Check for new messages on startup" "Check for new messages every NN minutes" "Automatically download new messages". Source: http://forums.mozillazine.org/viewtopic.php?t=635510........

  • iptables linux firewall recommended rules for public computing


    Whether you are at work, at the coffee shop or on the public internet here are some basic but effective rules for iptables that lock things down (eg. no one can SMB or SSH to you or really anything): # Generated by iptables-save v1.4.21 on Fri Dec 14 14:00:08 2018 *nat :PREROUTING ACCEPT [160:19844] :INPUT ACCEPT [4:357] :OUTPUT ACCEPT [2955:182236] :POSTROUTING ACCEPT [2955:182236] COMMIT # Completed on Fri Dec 14........

  • VMWare Pro Workstation Nic Disconnected and No IP Using NAT


    By default VMWare Workstation often doesn't work as we would like. If you create a VM with a default NAT IP it won't work you will find the NIC is disconnected (even though on the VMWare side it says connected including at Power On). How To Solve It 1.) Create New VMNet for NAT Click "Edit" -> "Virtual Network Editor" Click "Add Network" Select Network To Add "VMNet1" (........

  • Proxmox Breaks Storage/LVM Backing If Killing QEMU-IMG


    I tried to stop a qemu-img copy or clone and it broke everything. It was fine to "stop" it from the GUI but a process still persisted so I killed the relevant qemu-img and the kernel went crazy. It also may not have helped that I tried to lvremove a different volume (an unused disk). But either way it breaks LVM (you cannot even run lvdisplay) so a reboot is necessary. Jan 17 06:45:21 testserver kernel: [ 5680.439337] systemd-udevd D 0&nbs........

  • Debian 9 SSH root password authentication failure password not working problem / solution


    In Debian a lot of times SSH disables the root user to login by password by default. This means you will get an authentication failure as if you typed in the wrong password. The logs also indicate the password is wrong but what is often the case is in the config file Check /etc/ssh/sshd_config cat /etc/ssh/sshd_config|grep -i permitrootlogin Make sure it says: PermitRootLogin yes If not change it and restart SSH........

  • Linux wlan0 check all wireless clients


    iw dev wlan0 station dump This is very useful because it is helpful if you are running something like hostapd and need to see the signal strength and negotiated connection speed. Station ff:ff:ff:ff:ff:ff (on wlan0) inactive time: 16309 ms rx bytes: 25451 rx packets: 325 tx bytes: 44381 tx packets: 159 tx retries: 0 tx failed: 0 signal: -72 [-72] dBm signal avg: -72 [-72] dBm........

  • /etc/iproute2/rt_tables default settings file in Linux Centos 6,7 and most other NIX's


    This should apply to most Linux distributions just incase you get into trouble or wipe out the defaults by accident. /etc/iproute2/rt_tables # # reserved values # 255 local 254 main 253 default 0 unspec # # local # #1 inr.ruhep........

  • bind named error solutions named[2169]: error (no valid DS) resolving / error (broken trust chain) resolving / : error (no valid RRSIG) resolving 'com/DS/IN':


    Below are the common errors you'll get with named AKA bind if your time is incorrect. The simplest solution is to install and run ntpd to correct your system's time (install ntpd if it is not installed) systemctl start ntpd systemctl enable ntpd Dec 20 13:36:16 hostingbox named[2169]: error (no valid DS) resolving 'develop.waxrain.com/A/IN': 14.215.150.17#53........

  • iptables how to log ALL dropped incoming packets


    A lot of people just have a -j DROP to drop all unwanted traffic or traffic not explicitly allowed but there is a better solution if you want real and proper logging: Here is another example of more advanced iptables rules. Take an example iptables rules file -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth1 -p icmp -j ACCEPT........

  • How To Edit Linux Based NM Network Manager Connection Settings Without GUI


    Just find the relevant file in /etc/NetworkManager/system-connections sudo vi /etc/NetworkManager/system-connections/Wired connection 1 [802-3-ethernet] duplex=full mac-address=00:00:00:FE:FE:FE [connection] id=Wired connection 1 type=802-3-ethernet timestamp=1532403341 [ipv6] method=ignore [ipv4] method=manual........

  • Linux Disable IPV6 Centos / Debian / Mint Howto


    Set this in /etc/sysctl.conf net.ipv6.conf.all.disable_ipv6 = 1 #apply the settings sudo sysctl -p ........

  • Linux use growisofs to burn a larger file on a BD-R / Bluray Disc


    growisofs -Z /dev/sr0 critical.tar.gz.gpg Executing 'genisoimage critical.tar.gz.gpg | builtin_dd of=/dev/sr0 obs=32k seek=0' I: -input-charset not specified, using utf-8 (detected in locale settings) File critical.tar.gz.gpg is larger than 4GiB-1. -allow-limited-size was not specified. There is no way do represent this file size. Aborting. :-( write failed: Input/output error #remember to us........

  • Linux partprobe/partx cannot access last and 4th partition


    On a test machine Iwas never able to access to a newly created 4th partiton. As we can see there are dev devices for everything but the 4th partition. The normal "partprobe" or "kpartx" or kernel being told to rescan the block device didn't help (only a reboot did). fdisk -l /dev/sda Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units........

  • DRBD Errors Caused By Physical Corruption


    In a RAID array I had a have periodically lost a drive here and there over the past several months. Iwas always able to readd and resync without losing data. However at some point it looks like some minor corruption happened and this makes DRBD unhappy. Using fsck did not help either. Dec 19 06:01:45 storageboxtest4 kernel: [19005.945890] EXT3-fs error (device drbd0): ext3_get_inode_loc: unable to read inode block - inode=22184379........

  • Centos 6 / 7 / 8 How To Change Default nameservers in /etc/resolv.conf when using DHCP / dhclient


    First we need to create dhclient.conf if it doesn't exist or edit it: vi /etc/dhclient/dhclient.conf #add this line at the top add the IPs as commas they will be the highest priority nameservers and whatever your ISP gives you will be used after these one (good for DNS backup) prepend domain-name-servers 127.0.0.1,10.10.25.8; After you restart your network or run dhclient again you should see the contents of........

  • Debian Linux Mint Ubuntu iptables save and restore settings automatically onboot and reboot


    First you need the "iptables-persistent" package. This gives you an init script that loads your settings from /etc/iptables/rules.v4 and rules.v6 When you install it, it wll save your default setings in /etc/iptables. sudo apt-get install iptables-persistent Remember that the rules are stored here: For IPV4: /etc/iptables/rules.v4 For IPV6: /etc/iptables/r........

  • Why SMART is not smart at all and doesn't properly predict disk errors that cause a kernel panic or crash


    Before getting into the output here is my typical experience with SMART, there is what I call a "bad disk" with pending and uncorrectable sectors that cannot be reallocated. It has caused a kernel panic and system crash repeatedly as we can see from the logs. But SMART says it has "PASSED" its self assessment. SMART is still useful to me but it is more about looking at Current_Pending_Sector. Any time I have had anything but 0 for that attribute it........

  • VirtualBox How To Add iSCSI Storage using VBoxManage


    #to show all VBoxManage list vms #show ONLY running vms VBoxManage list runningvms VBoxManage storageattach test --storagectl "SATA" --port 0 --device 0 --type hdd --medium iscsi --server 192.168.1.91 --target "iqn.2018-12.local.abcrandom.target:sdb" --initiator "iqn.1982-01.ca.bla.tld:abc123" --t........

  • iSCSI on Centos 7 Configuration and Setup Guide for Initiator and Target


    initiator = client target = server These are the first concepts you should understand which is that in iscsi essentially the "initiator" is the client and the "target" is the server. iSCSI is derived from the old fashioned SCSI that us oldtimers grew to love. The "i" stands for Internet and the SCSI stands for "Small Computers Systems Interface" (SCSI). iSCSI Target (Server)Setup targetcli is the pac........

  • Python and BeautifulSoup4's BS4's Decompose Method To Remove Unwanted Inner Tags


    < a href="/Products/MX72244"> < span class="c-shca-icon-item__body-name-brand"> ADATA < / span> &nbs........

  • httpd AH00534: httpd: Configuration error: No MPM loaded. solution


    httpd AH00534: httpd: Configuration error: No MPM loaded. Simple Solution (assuming you don't have this line in httpd.conf aleady: echo "Include conf.modules.d/*.conf" >> /etc/httpd/conf/httpd.conf ........

  • bash script to remove modules from httpd.conf that are not actually installed


    confmodules=`cat /etc/httpd/conf/httpd.conf |grep -v ^#|grep "modules/"|awk '{print $3}'|cut -d "/" -f 2` for module in $confmodules; do echo "module=$module" if [ ! -f /etc/httpd/modules/$module ]; then linenum=`awk /"$module/{ print NR; exit}" /etc/httpd/conf/httpd.conf` sed -i "$linenum"s/.*// /etc/httpd/conf/httpd.conf &n........

  • bash scripting how to create a function


    function centos7 { release=`cat /etc/redhat-release|awk '{print $4}'|grep ^[7]` if [ "$release" != "" ]; then centos7='yes' fi } centos7 echo "$centos7" We create a function called "centos7" and then call it by just typing "centos7" We then access a variable that may be set........

  • How Does Cisco CUCM (Cisco Unified Communication Manager) Work?


    Cisco's CUCM (Cisco Unified Communication Manager) is a system that combines voice, video, data and mobile products into a single unified management suite. At its core, the CUCMis like a "Super PBX" that controls the flow of all communications through an organization even single or multiple site deployments. Cisco's CUCMmakes communication more effective and simple through centralized management and unification of communications resources.........

  • What DNS Options Does Active Directory Offer in Windows Server 2008,2012,2016 ?


    What Is Active Directory? Active Directory is essentially an enhanced, centralized database with a set of objects that make user management, authorization, and data management simpler. Active Directory is synonymous with "Domain Controllers" where a single "domain" often consists of multiple sites and members of the domain. Multiple domains can also be joined to belong to a tree ( a collection of domains). And the highest layer is the forest whi........

  • grep regular expression match number range between specific numbers


    grep -E servers1[2-6] somefile.txt The 1 before the [ bracket means that the number must start with one and can be between 1 and [2-6] or in plain English between 12-16. ........

  • bash script how to to check LAN computers for open ports


    In this case it just searches for port 80 it is fairly handy if you have some sort of appliance or something else you aren't sure of the IPof Of course change the port 80 port to whatever port(s) you want. for ip in `arp -n|arp -n|tail -n +2|head -n -1 |grep -v incomplete|awk '{print $1}'`; do echo "checking $ip:80" nc -w 1 -z $ip 80 if [ "$?" == 0 ]; then echo "**Port 8........

  • MySQL Using mytop Debug Source of High IO and Slow Performance


    mytop is one of my favorite tools and it is fairly simple aside from a few caveats and issues that persist to this day. To install it on Centos: yum -y install centos Configure ~/.mytop vi ~/.mytop user=root host=localhost db=test #port=3306 socket=/var/lib/mysql/mysql.sock header=1 color=1 Try runni........

  • systemd management using systemctl and journalctl to check systemd logs


    systemd is like the service manager for your Centos and other modern Linux distributions (including Debian/Mint/Ubuntu) allows you to enable services, stop them, restart them, check their status and even reboot your system. The key commands or arguments you will use with systemctl are the following: Unit Commands: list-units [PATTERN...] List loaded units &nbs........

  • css br with extra blank line


    The problem I was having is that a css template Iwas using was causing br's to have an empty line in between which is very undesirable especially when displaying code. br { display:none; margin: 0px; height: 0px; } Using CSS code like above will fix it. You technically shouldn't need the margin or height either.........

  • Linux What is umask (user mask) for file and directory creation permissions and how to calculate umask and change the defaults


    umask are the default permissions that are applied when a file or directory are created. To see this in action simply just "touch filename" or "mkdir somedir" and you'll see what default permissions are applied. The first thing Ialways tell people you should know is to NEVER change the defaults unless you are making them more restrictive. But they work well and if you change the defaults you could end up creating a file without permission to read........

  • Centos 7 python34 how to install the gi library


    Getting an error about gi missing when running a .py python script? Just install EPEL and install the python3-gobject package: yum install python34-gobject........

  • AMD Set Fan Speed and Other Powerplay Memory/CPU Timings with a Linux script


    You can do other things but this particular script is just to set all AMD cards to 80% fan speed (remember this script needs to applied everytime you reboot). You could set it is a cron or just throw it into /etc/rc.local basepath=/sys/class/drm for hwmon in `ls -1 /sys/class/drm|grep card[0-99]$`; do echo card=$hwmon; hwmonname=`ls $basepath/$hwmon/device/hwmon|grep hwmon[0-99]` hwmonpath=$basepath/$hwmon/device/hwmon/$hwmonname echo "ec........

  • Ethereum Mining Claymore Nanopool Error


    This happens if you don' have an updated version normally(eg. things were working fine and you suddenly get this error): Pool sent wrong data, cannot set epoch, disconnect ETH: Connection lost, retry in 20 sec... ETH: Connection lost, retry in 20 sec... Solution - Download an updated Claymore! ........

  • genisoimage errors with long filenames and deep directory structures


    You'll have to violate the iso9660 standards but it is necessary if you want to preserve your filesystem and filenames and shouldn't be an issue as long as you are using a modern OS like Linux. genisoimage -o Backup-Myfiles.iso -r -J -joliet-long /some/path/ You will get errors like below (even enabling joliet-long didn't help) genisoimage: Error: /some/filename.pdf have the same Joliet name Joliet tree sort failed. The -joliet-lo........

  • Linux Kernel USB Export Errors


    4.374647] usb_common: exports duplicate symbol usb_get_dr_mode (owned by kernel) [ 4.403334] usbcore: exports duplicate symbol __usb_get_extra_descriptor (owned by kernel) [ 4.427736] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 4.427844] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 4.429040] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810 [ 4.429141] xhci_hcd 0000:00:15.0: cache line size of 64 is not sup........

  • How to download gajim 0.16.9 XMPP/Jabber client so you can use OMEMO encryption


    #Linux Mint 18.2 how to install gajim .16.9 so you can use OMEMO encryption: sudo apt-get install python-axolotl python-nbxmpp wget https://gajim.org/downloads/0.16/gajim-0.16.9.tar.gz tar -zxvf gajim-0.16.9.tar.gz cd gajim-0.16.9 ./autogen.sh ;make;sudo make install #if you get this error you need to get a newer python-nbxmpp from here: gajim Gajim needs python-nbxmpp >= 0.6.1 to run. Quiting...........

  • HP DL385 G7 Linux BIOS Update Flash


    wget https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe --2018-08-16 05:11:16-- https://downloads.linux.hpe.com/repo/spp/rhel/6/x86_64/current/CP017004.scexe Resolving downloads.linux.hpe.com (downloads.linux.hpe.com)... 15.249.152.85 Connecting to downloads.linux.hpe.com (downloads.linux.hpe.com)|15.249.152.85|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1525561 (1.5........

  • hwloc-nox set CPU affinity in Linux


    sudo apt-get install hwloc-nox Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: hwloc-nox 0 upgraded, 1 newly installed, 0 to remove and 530 not upgraded. Need to get 151 kB of archives. After this operation, 453 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubunt........

  • Proxmox error uploading an iso solution


    Error 0 occurred while receiving the document root@vh1:/var/tmp# wget http://mirror.compevo.com/proxmox/proxmox-ve_5.2-1.iso --2018-08-30 16:27:37-- http://mirror.compevo.com/proxmox/proxmox-ve_5.2-1.iso Resolving mirror.compevo.com (mirror.compevo.com)... 103.25.61.44 Connecting to mirror.compevo.com (mirror.compevo.com)|103.25.61.44|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 641517568 (612M) [application/o........

  • MySQL change for Antelope format to Barracuda error solution


    Your database uses Antelope as the file format. Full UTF-8 support in MySQL and MariaDB requires the Barracuda file format. Please switch to the Barracuda file format. See the documentation MySQL full unicode support for details. In /etc/my.cnf under [mysqld] 180827 21:43:14 InnoDB: 5.5.59 started; log sequence number 1589339 180827 21:43:14 [ERROR] /usr/libexec/mysqld: unknown variable 'db_file_format=Ba........

  • vmkping -I vmk1 10.0.2.69 PING 10.0.2.69 (10.0.2.69): 56 data bytes sendto() failed (Host is down)


    [root@localhost:~] vmkping -I vmk1 10.0.2.69 PING 10.0.2.69 (10.0.2.69): 56 data bytes sendto() failed (Host is down) vsphere distributed switch vmotion not working [root@localhost:~] esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface&........

  • gvfs mount in /run/user cannot be accessed or displayed wrong permissions Error: Location is already mounted


    You get errors like below and see you have all question marks for the permissions if you go to /run/user/1000/gvfs If you try to access the mounted share such as anything mounted as gvfs like an SSH share in your file manager you may get an error like this. It generally means an interruption in communication or a fault with gvfsd has caused it. Solutio........

  • How To Enable Nested KVM so guests can virtualize with hardware extensions


    How to check if nested KVM is enabled by doing a cat on nested inside sys Nested KVM is mainly important for testing for example if you wanted to install VMWare or Proxmox Nodes in a virtual environment for testing. Without nesting, the performance will be extremely slow, since the VMs within the nodes will not be using Virtualization extensions. I've used wildcard on kvm_ because it could be kvm_intel or kvm_amd depending on whether y........

  • Supermicro IPMI / KVM / BMC Remote Console Screen Resizing Issue - Window Cut Off Solution


    It could just be my specific Java but other KVM/IP works ok on my machine but with Supermicro's IPMI for some reason the console window doesn't resize and even putting it in full screen leaves the window cut off as shown below: As you can see above the screen is cut off you can't see the "Iagree" on the right side. The window resi........

  • Linux bash shell doesn't show username, hostname or current path fix solution


    Usually this is because when you created your user you added a user but didn't create their home directory and/or for some reason your .bashrc and .bash_profile in ~ (home) is broken/missing. In your home just create the following files with the following content to solve it: .bashrc and .bash_profile. To apply it just relogin/start a new bash session # .bash_profile # Get the aliases and funct........

  • zenity popup messages, windows, dialogs, error messages calendars and more howto on Gnome Linux including Ubuntu, Linux Mint, Centos and more


    zenity is a nice utility as part of the gnome window manager that allows you to script from bash and retrieve the input from the user. It could also be helpful in just notifying a user when they login with a popup window. I'll give an overview of what's available with zenity: Application Options: --calendar Display calendar dialog --entry Display tex........

  • Debian/Ubuntu/Mint Linux How To Set VLAN in /etc/network/interfaces


    You can find many ways to specify the VLANin your network configuration but Ifind this is the simplest and quickest. In this case we are talking about a bridged adapter "vmbr0" but it works even if you just had a normal non-bridged interface. The key here is that in vmbr0 you'll notice there is no IP address. We just specify "manual". Below it is a similar stanza for "vmbr0.58" in this case 58 represents the VLAN (change........

  • moodle install error Error reading from database


    Error reading from database More information about this error It is usually not possible to recover from errors triggered during installation, you may need to create a new database or use a different database prefix if you want to retry the installation. Solution: This happened when I was running MySQL 5.1. Assuming your database details are right and the DB is up then make sure you are usin........

  • PHP Displaying Blank Page on Apache


    Almost always the reason will be that the php.so file is missing but also that php.conf is misconfigured. In the problem machine it is actually PHP7 installed so if you reference PHP5 of course things wil be broken! Take for example here: cat /etc/httpd/conf.d/php.conf # # PHP is an HTML-embedded scripting language which attempts to make it # easy for developers to write dynamica........

  • PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0


    PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0 Solution: Edit geoip.ini vi /etc/php.d/geoip.ini Comment out the .so like so: ;extension=geoip.so service httpd restart........

  • Starting httpd: httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/httpd/modules/libphp5.so: cannot open shared object file:


    Starting httpd: httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/httpd/modules/libphp5.so: cannot open shared object file: No such file or directory This is basically caused by the PHPmodule specified in php.conf being non existent. The error tells us it couldn't fnd /etc/httpd/modules/libphp5.so........

  • VMWare ESXi 6.7 SSH/PowerShell CLI Commands


    [root@localhost:~] BootModuleConfig.sh echo host-ind nfcd........

  • VMWare Vsphere VCSA Graphical Install Creates json


    yes it does create its own json ============================================ cat /tmp/vcsaUiInstaller/ovftool-20180809-175238948-20180809-175603497.log |grep -i json 2018-08-09T17:56:04.238-07:00 verbose OVFTool[30966] [Originator@6876 sub=Default] Manifest file entry: SHA1(VMware-vCenter-Server-Appliance-6.7.0.12000-8832884_OVF10-file1.json) = 1deb658c724767697587d5909c4051c01813e6a1 --> ........

  • ./xmr-stak: error while loading shared libraries: libmicrohttpd.so.10: cannot open shared object file: No such file or directory


    The solution is just to install libmicrohttpd-dev ./xmr-stak ./xmr-stak: error while loading shared libraries: libmicrohttpd.so.10: cannot open shared object file: No such file or directory libmicrohttpd libmicrohttpd10 - library embedding HTTP server functionality libmicrohttpd-dbg - library embedding HTTP server functionality (debug) libmicrohttpd-dev - library embedding HTTP server functionality (development) $ sudo apt-get i........

  • qemu-img resize howto


    The Correct Way To Resize In Place qemu-img resize kvmuserwindows2008dcetest.img +1G Image resized. Below is a common mistake that some users make they are trying to specify a new image name but it can be resized in place (just make sure the VMis NOT running and you've backed up the data in case something goes wrong). qemu-img resize kvmuser453111.img kvmuser453111-larger.img +5G New i........

  • Debian Mint Ubuntu compiling xmr-stak


    sudo apt-get install libcurl4-openssl-dev git build-essential autotools-dev autoconf libcurl3 sudo apt-get install libcurl4-gnutls-dev git clone https://github.com/wolf9466/cpuminer-multi sudo apt-get install cmake libpthread-* libmicrohttpd-dev libssl-dev libhwloc-dev git clone https://github.com/fireice-uk/xmr-stak-cpu.git make install cd bin chmod +x xmr-stak-cpu ./xmr-stak -O xmr........

  • [warn] VirtualHost 10.2.5.101:443 overlaps with VirtualHost 10.2.5.101:443, the first has precedence, perhaps you need a NameVirtualHost directive


    [root@thetor2017 conf]# service httpd restart Stopping httpd: [ OK ] Starting httpd: WARNING: MaxClients of 3000 exceeds ServerLimit value of 300 servers, lowering MaxClients to 300. To increase........

  • Ethereum Client Errors


    INFO [07-19|12:11:51] Imported new block receipts count=590 elapsed=8.440s bytes=74117699 number=4870906 hash=6bc60b…934753 ignored=0 INFO [07-19|12:11:57] Imported new state entries count=499 elapsed=9.963ms processed=71076 pending=1526 retry=2&nbs........

  • PayPal IPN Failed "result: IPN Handshake Invalid"


    This is often the result of PayPal's "item name" or another name having invalid characters or not supporting Unicode. 173.0.81.1 - - [17/Jul/2018:13:39:45 -0400] "POST //modules/gateways/callback/paypal.php HTTP/1.1" 406 - "-" "PayPal IPN ( https://www.paypal.com/ipn )" A good clue is if you check the debug output of the IPNand find a mandatory column empty. ........

  • Linux Centos 7 HowTo Install Yarn


    https://yarnpkg.com/lang/en/docs/install/#centos-stable curl --silent --location https://dl.yarnpkg.com/rpm/yarn.repo | tee /etc/yum.repos.d/yarn.repo If you need node.js: curl --silent --location https://rpm.nodesource.com/setup_6.x | bash - yum install nodejs yarn........

  • Centos 7 - How To Install NFS and Mount Remotely


    Server Side Config 1.) First install nfs-utils yum -y install nfs-utils 2.) Configure nfs share Create a directory for your NFS share mkdir /datastore Create your NFS share in /etc/exports echo "/datastore 10.220.101.0/24(rw,sync,no_root_squash)" >> /etc/exports systemctl restart nfs........

  • wodim / cdrecord error cannot burn DVD or BDR .iso Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error


    dvd+rw-mediainfo /dev/sr0 INQUIRY: [ASUS ][BW-16D1HT ][3.00] GET [CURRENT] CONFIGURATION: Mounted Media: 11h, DVD-R Sequential Media ID: RITEKF1&n........

  • linux mint image convert menu option missing solution


    Ialready have the caja-image-converter option installed but it shows nothing. Weirdly enough if you install nemo and nautilus converter it does show and work inside caja: The solution is to install *-image-converter sudo apt-get install *-image-converter Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'n........

  • Linux Mint 18 Screen Goes Dark or Black After Screensaver or even when using the Desktop Solution


    You can search for this bug and it seems like it may be related to ecryptfs and is many years old. The symptoms are that you return to the computer and the screensaver was active or the screen was asleep/black and it doesn't seem to come back. But you check by SSH the computer is running fine and are frustrated you'll lose your running programs and have to reboot. There is a simple solution: Ctrl + Alt + F1 Ctrl +Alt + F8 Ba........

  • Postfix How To Change Sending IP Address To Specific IP Binding or Interface


    Ithought I'd post this becuase there is some bad information out there. Some guides tell you to edit /etc/postfix/master.cf (-o smtp_bind_address=) but this doesn't work. The same guide also says if you don't change it there you end up changing the listening IP/bind interface which is also not true. Here is a simple and effective way to change Postfix's sending/binding/outgoing IP address (very important for reverse DNS and so mail servers don't block you)........

  • How to qemu-kvm enable bridged networking in Debian Ubuntu Linux Mint on KVM containers


    I've read a few guides about this but they didn't work for me. sudo apt-get install bridge-utils #don't think the above is enough it won't work still even though you have by default an /etc/qemu-ifup that handles it if you have the right tools and setup sudo qemu-system-x86_64 -net tap -net nic -enable-kvm -cpu host,vmx=on ~/VirtualBox VMs/vsphere-vcenter/vsphere-vcenter.vdi W: /etc/qemu-ifup: no bridge for guest interface foun........

  • VSphere InternalServerError - Error When Adding Permissions


    InternalServerError (com.vmware.vapi.std.errors.internal_server_error) => { messages = [LocalizableMessage (com.vmware.vapi.std.localizable_message) => { id = vapi.bindings.method.impl.unexpected, defaultMessage = Provider method implementation threw unexpected exception: com.vmware.vapi.std.errors.InternalServerError, args = [com.vmware.vapi.std.errors.InternalServerError] }], data = } I was getting the........

  • OVF Tool: Error: Task failed on server: This host does not support Intel VT-x. VMWare VCenter install On ESXi ERror


    Intel VT-X is enabled in Virtualbox but it doesn't seem to pass through the needed vmx extension despite the following variables on the host confirming it is enabled: cat /sys/module/kvm_intel/parameters/nested Y cat /sys/module/kvm_intel/parameters/ept Y OVF Tool: Disk progress: 99% OVF Tool: Transfer Completed OVF Tool: Powering on VM: Embedded-vCenter-Server-Appliance- OVF Tool: Task p........

  • Install NFS (Network File System) On Debian Linux Ubuntu Mint Howto


    sudo apt-get install nfs-kernel-server #oops there are no exports so it won't startsudo /etc/init.d/nfs-kernel-server start* Not starting NFS kernel daemon: no exports. #we will use the /tmp/nfstestshare directory for our NFS share mkdir /tmp/nfstestshare #add it to /etc/exports (basically what NFS checks to determine what to make an NFS share) /tmp/nfstestshare 192.168.1.5(rw,sync,........

  • Relocating modules and starting up the kernel - VMWare ESXi 6.7 Error and Solution


    I had this error in an unsupported CPUon VMWare 6.7 and apparently this sometimes works especially on older VMWare versions like 6.5 5.5 etc (but in my case it did not). To make sure it proceed when you see "Loading VMWare" Hit "Shift+O" Then add "ignoreHeadless=TRUE" See an example below:........

  • VMWare 6.7 VCSA VSphere ESXi Management SSO Install Guide on Linux using the CLI


    #mount the VCSA DVD mount /dev/sr0 /mnt/cd #alternatively you could mount the iso directly mount -o loop vcsa.iso /your/mount/path #for this purpose we are using the CLI installer on Linux cd /mnt/cd/vcsa-cli-installer/lin64 #no it's not going to be that easy you can't just run vcsa-deploy like that you need to use a template or configured .json file ./vcsa-deploy Usage: vcsa-deploy [-h] [--version] [--supported-deploymen........

  • Hard Drive Serial Number Examples


    The reason for this article is because a lot of us don't physically see our hard drives they are often remote in a datacenter etc and the actual serial number we see in SMART is not enough to check for some manufacturers. A good example is our first one the Toshiba === START OF INFORMATION SECTION === Device Model: TOSHIBA DT01ACA200 Serial Number: 33FMDW4AS........

  • OpenVPN auth-user-pass-verify ENV script error


    Starting with newer versions of OpenVPN Ibelieve 2.2+ you need to have "script-security 3" set or you can't execute a third party script. Prior to that you could also use the auth-user-pass-verify like this: auth-user-pass-verify ./validate.pl "$username $password $ip" via-env Options error: the --auth-user-pass-verify directive should have at most 2 parameters. To pass a list of arguments as one of the paramete........

  • OpenVPN error ERROR: Cannot ioctl TUNSETIFF tun: Operation not permitted (errno=1)


    This basically means that you are running as non-root and you need to be root to create the tun0 or tap0 device on OpenVPN. You could try sudo or adding the openvpn binary to the list of sudoers.........

  • Howto install ioncube loader to PHP by Zend


    First of all download the raw .so file from zend: Copy the one relevant to your PHPversion to /usr/lib64/php/modules/ eg.:cp ioncube_loader_lin_5.3.so /usr/lib64/php/modules/ Then in your /etc/php.d/ directory create the file: vi /etc/php.d/zend.ini zend_extension = /usr/lib64/php/modules/ioncube_loader_lin_5.3.so After that restart apache/httpd and you'll be good to go!........

  • Cannot create gradle for conversations


    The main issue is it looks like Java is not configured to accept the invalid ssl cert that is coming from the download location. Exception in thread "main" java.lang.RuntimeException: javax.net.ssl.SSLException: java.security.ProviderException: java.security.InvalidKeyException: EC parameters error export ANDROID_HOME=/home/user/Downloads/tools/ Conversations-master$ ./gradlew Downloading https://services.gradle.org/distributions/grad........

  • not allowed to execute '/usr/bin/apt-get install eclipse' as root linux sudo user permisson issue and solution


    This is most likely to happen on a normal GUI system like Ubuntu or Linux Mint. If you or the user is meant to have sudo / root privileges it is as simple as editing the following files: Now assume your username is "iamtheuser" vi /etc/group adm:x:4:syslog,iamtheuser sudo:x:27:anotheruser,iamtheuser Find the above lines and add a comma and "ia........

  • postfix errors fatal: no SASL authentication mechanisms /usr/libexec/postfix/smtpd: bad command startup -- throttling solution


    Jul 3 22:12:17mailserver postfix/smtpd[6195]: fatal: no SASL authentication mechanisms Jul 3 22:12:18mailserver postfix/master[4881]: warning: process /usr/libexec/postfix/smtpd pid 6195 exit status 1 Jul 3 22:12:18mailserver postfix/master[4881]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling This only ever happens in my experience when the authentication method is actually Dovecot. Usually the problem........

  • mail command line examples of how to send an email using Linux / Unix and the Bash Shell or Scripting


    A simple way that may work for a lot of people who just need basic output for their scripts or daemons to announce an action is this: echo "body or message" | mail -s "realtechtalk.com" user@domain.com If you want to send a text file as the body just do this instead: mail -s "realtechtalk.com" user@domain.com < /tmp/sometxtfile.txt These are some ve........

  • named [FAILED] - zone 1.168.192.in-addr.arpa/IN: not loaded due to errors. - bind error solution


    Centos when copying old files and restarting it seems load everything fine and then says [FAILED] with no log or other message. service restart named named [FAILED] Check more thoroughly you may have missed the error if you have lots of zones! service named restart|grep error zone 1.168.192.in-addr.arpa/IN: not loaded due to errors. zone 2.168.192.in-addr.arpa/IN: no........

  • OpenVPN cannot ping remote IP routing loop issue after connecting


    Sometimes if you have a very basic configuration OpenVPN on the client side for some reason sends all traffic to the OpenVPN server IP through the tun0 which is of course impossible and creates a block or routing loop. This is because you need to use your normal ISP/LANgateway to hit the OpenVPN server if it is remote/offsite as is usually the case. So if you are connected to the OpenVPN through say a tun0 device and your routing is set to connect to the OpenVPN&nbs........

  • Maximum number of connections from user+IP exceeded (mail_max_userip_connections=10) Dovecot Solution


    This happens because Dovecot limits the maximum IMAPconnections per IPto just 10. This may be fine for a single client side IPbut if an entire office or multiple users are behind one IPor a single heavy user is active then you will get bizarre errors in your e-mail clients such as "Password Incorrect" or similar in Thunderbird. It won't be obvious on the client side as to what the problem is and they will probably just think the server is misconfi........

  • Linux Mint Black Screen after boot no graphics solution


    This is not the normal "black screen"issue and I was shocked to eventually find out why. The normal advice of reconfiguring Xorg didn't work. Even booting into "Recovery Mode" did not help. Here is the short end of the stick that fixed it: sudo apt-get install mdm mate-desktop-environment Yes you got it right, mdm and the mate-desktop-environment / gnome were somehow uninstalled. This must be whe........

  • Mozilla Firefox Address Bar History Not Working places.sqlite corruption solution database repair


    Here is the only solution Ifound that works in Firefox: *Note you could basically just copy all of the commands in bold (the rest just shows the output) Install sqlite3 sqlite3 places.sqlite sqlite> .clone places.sqlite-fixed moz_places... done moz_historyvisits... done moz_inputhistory..........

  • Centos PXEBoot NetInstall Failure - Pane is dead


    ValueError: new value non-existent xfs filesystem is not valid as a default fs type Pane is dead From what Iread this is misleading and has to do with the fact that the initrd and kernel are mismatched. This is a hard situation because for some older hardware Iam using the Centos Plus kernel which has modules that Irequire for an older server/NIC. This seems to have cropped up in the past few months and there is no simple fix........

  • Intel NUC J3455 Linux Kernel freeze slowness 4.4.98 errors


    It looks like this has something to do with APIC but I am not sure. I have similar CPUs with a different MB and BIOS that work fine on the same type of kernel. A lot of time the issue is because of the C-step setting in the BIOS. The same thing happened on the 2.6 kernel with Centos 6 but this is a homebrew 4.4 kernel soI am not sure why it is happening when even Centos 7 (3.2) kernel works OK. Solution - It comes down to the BIOS set........

  • Linux Ubuntu Mint Debian cannot play xvid,x264,mp4 or any videos codec issue - xplayer Could not initialize supporting library.


    In xplayer Iget the following error "Could not initialize supporting library.". It actually looks more like a gstreamer issue. For those wondering what the default video player is called it is "xvid" and not "totem" anymore like previous versions. Basically it looks like some codecs are missing when I uninstalled another program it uninstalled other programs and codecs that it shouldn't have. I've tried installing all the gstre........

  • wget howto output to terminal or script instead of file


    wget -qO You just need the -qO switch and you'll be good to go, the output then goes to your console/screen/script rather than a file.........

  • imagemagick convert to chop off top of image


    This is useful if you have a bunch of images/scans where the same area at the top needs to be chopped. Sometimes the -trim option (such as the case of white space on top)is wrong and ends up cropping the image and losing some text. ImageMagick's convert is very useful but tricky to find some things out as I find it to be less than intuitive sometimes. Chopping off the bottom convert -crop -0-400 image.jpg image.pdf........

  • How To Turn Any .iso file into a bootable USB drive


    This works for almost all ISO's Ifind (at least Linux based): sudo dd if=CentOS-6.9-x86_64-minimal.iso of=/dev/sdg bs=20M 20+1 records in 20+1 records out 427819008 bytes (428 MB) copied, 118.233 s, 3.6 MB/s Of course change the .iso filename above and the /dev/sdg to your desired USB drive!........

  • Linux Mint Ubuntu Debian How To Disable Webcam Automatically Onboot To Prevent Spying and Privacy Violations


    It is well known hackers, the NSA, CIA and other groups have created malware to secretly turn on your webcam and microphone on your phone, tv etc.. But fortunately on our computers and laptops we have some options. Most webcams use the "uvcvideo" kernel module / driver. You can disable this in two ways on boot. I recommend both just as a failsafe. Disable it on rc.local once your system boots automatically Add the followi........

  • IcedTea Java Web Viewer Config Utility How To Enter


    In at least Ubuntu and Mint there is nothing intuitive about configuring Java. Execute it to get to it: itweb-settings You'll be able to configure different options and variables. You can also check under Security as some of those settings could prevent applets from starting or prompting to........

  • Debian Linux Mint Ubuntu Disable Automatic apt-get update


    sudo chmod 000 /etc/cron.daily/apt-compat This is the easiest way to disable the cron without anything more invasive like deleting the file. After that you won't have anymore apt-get's starting. This can be critical for systems without much extra RAMthat is not in use. I've seen systems that have swapped and crashed over apt-get.........

  • Prevent SSH Bruteforce and Hacks By Disabling Password Authentication


    One simple way to keep your server public but almost impossible to hack via SSHis to disable password authentication over SSH. This means the only way in is via your own private key that only you should have. Edit your /etc/ssh/sshd.conf file Set this option PasswordAuthentication no Restart your SSH server. service sshd restart ........

  • SMF Forums / Simple Machines Forums Not Displaying Images Theme or Styles Properly using 127.0.0.1


    This is one thing that has me wondering about SMF. It is apparently a known issue but in the latest version and new install nothing looked right because it was using http://127.0.0.1 to find everything! How on earth would it ever do this or think it is normal? Excerpt of crazy html code it produces that causes the issue: ........

  • MySQL How To Grant Access To ALL Databases For Export and Backup Purposes


    GRANT SELECT, LOCK TABLES ON *.* TO yourmysqluser@localhost; All you need to do a full MySQL dump on all databases is the SELECT and LOCK TABLES privileges. This way you don't have to use the mysql root user. Data could be compromised this way but at least no harm from manipulation, changes or deletion are possible by locking down the privileges to the minimum for a full MySQL dump and backup.........

  • Apache htaccess Custom ErrorDocument not working properly for root home page 403 Error Issue and Solution


    So I have a domain "testdomain.com". Inside test domain.com's root is the following .htaccess: Options +FollowSymLinks -Indexes ErrorDocument 403 /launch/index.html Order Deny,Allow Deny From All Allow From 192.168.1.2 When you visit anything other than root things work fine. Eg. if you visit http://testdomain.com/somedirfile.html It will show the right error in /launch/........

  • How To Install Windows Server 7 8 10 12 2008 2012 2014 2016 Servers Desktops using Linux tftp, dhcpd and samba


    It has been a big pain for a long-time to install Windows from a Linux environment. I used to run a windows install server and it never worked right for some reason (the install would fail on most servers). Before getting start be sure to setup your samba share so once you boot into WinPE you can mount the install for whatever Windows you want /etc/samba/smb.conf [smbwinstall] path = /tftpboot/images/winstall guest ok = yes........

  • sudo: unable to resolve host


    sudo: unable to resolve host yourhostname No clue why sudo is doing that when running. Solution Check /etc/hosts You will probably find that it doesn't contain "yourhostname" for 127.0.0.1 Just update the hostname or add a field for your hostname like this: 127.0.0.1 yourhostname ........

  • "Object of class WP_Term could not be converted to string"


    Normally when I've seen this it's when you are using a variable like a normal string when in fact it's actually an array such as this example: [Tue Mar 13 04:22:35 2018] [error] PHP Catchable fatal error: Object of class WP_Term could not be converted to string in /vhost/httpdocs/wp-content/plugins/wp-instagram-post/classes/class-woo-igp.php on line 578 &nbs........

  • Wordpress Instagram Post Modify Plugin To Add Tags


    I modified this code after quickly learning how Wordpress plugins actually work, how they're called etc.. was the first trick to modifying the code to add tags. Add this code after line 570 in wp-content/plugins/wp-instagram-post/classes/class-woo-igp.php &nb........

  • Unable to load dynamic library '/usr/lib64/php/modules/module.so' - /usr/lib64/php/modules/module.so: cannot open shared object file: No such file or directory in Unknown on line 0


    Getting this error on Centos 6 with PHP 5.3 when just running "php -v" PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/module.so' - /usr/lib64/php/modules/module.so: cannot open shared object file: No such file or directory in Unknown on line 0 PHP Warning: Cannot load module 'XCache' because conflicting module 'apc' is already loaded in Unknown on line 0 Solution:........

  • How to start screen in bash script or from /etc/rc.local on startup as a specific user


    It takes some tinkering the main thing is that the "-dmS" flag allows screen to start without a session which of course sudo won't have. solution: /usr/bin/sudo -u user /usr/bin/screen -dmS nameyouchoose /script/start.bash this doesn't work at all: /usr/bin/sudo -u user "/usr/bin/screen /script/s........

  • Linux How To Clone One System Harddrive to another remote system


    The easiest way is to use SSHand DD or a combination of netcat. SSHwill be a little slower due to encryption but is the most secure way (on two older systems the average clone speed is about 40-50MB/s). This is also OS independent as it doesn't matter what the source OS is because you are literallly cloning the drive so you retain the partition table and settings. Clone HDD using SSH and DD........

  • Ubuntu/Debian/Linux won't boot and drops to Busybox shell after cloning HDD with dd


    I don't recall having this issue in the distant past but nowadays at least Debian seems to be very picky about this. I used dd to copy one hard drive to another and tried booting it. Everything seemed fine with grub working but each time it would drop to the busybox shell. There is no particular error so this is misleading. Normally the first things you would check are to make sure your fstab is correct (that the UUID is correct)and that you've updated grub.&........

  • Debian Mint Ubuntu Linux Server Password Forgotten Reset Password Solution Centos 7 8 Root Password Reset Recovery


    This guide will work for most modern Linux versions like Centos RHEL 7, Debian, Mint, Ubuntu etc... In Centos 7 the days of editing the "kernel"line and adding "single"are gone. On top of that sometimes after a new install passwords do not work, maybe you forgot your password or for some other reason you need to break in or fix your system? It could also be because you can't mount your root / or some other /etc/fstab error and many other err........

  • MySQL Cannot Update/Write to any database table solution


    This happened on Centos for no apparent reason with no obvious issue in the logs. Data could be read fine but not written (possibly due to some corruption or out of memory issue in the OpenVZ container is the best guess). All mysql update and insert queries failed freezing without any error log on any database and table. Tried to restart: service mysqld restart Timeout error occurred trying to stop MySQL........

  • Centos How To Update to Glibc 2.14 Plus


    Centos 6 requires GLIBC 2.12 however a lot of new programs you would want to compile may need a newer glibc. You can't remove the old glibc since the whole OS is based on it but you can install the updated glibc alongside it and do an export pointing to your updated GLIBC. mkdir ~/glibc_install; cd ~/glibc_install wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz........

  • MySQL How To Add New Field Column To Existing Table


    ALTER TABLE thetable ADD newfield VARCHAR(255) It's very simple just specify "the table" and then the newfield type........

  • mysql how to reset passwords with a few commands


    The commands below will help you reset any mysql user password. use mysql; update user set password=PASSWORD('thenewpass') where User='theusername'; flush privileges; The first line says to use the "mysql" database which contains all the user info. the second update line sets the new password "thenewpass" for the u........

  • PHP geoip.so fatal error Solution


    PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/geoip.so' - /usr/lib64/php/modules/geoip.so: undefined symbol: GeoIP_country_code_by_name_v6 in Unknown on line 0 Remove the GEOIP from PHP: php71w-pecl-geoip-1.1.1-1.w6.x86_64 PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the........

  • Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/httpd/modules/libphp5.so: cannot open shared object file: No such file or direct


    Stopping httpd: [ OK ] Starting httpd: httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 6 of /etc/httpd/conf.d/php.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/h........

  • How To Create Apache htpasswd file


    This just simply outputs what you need a username and password that can be used to authenticate from .htaccess htpasswd -nb user password user:Gnb6uE9Lp4gt2 If you want to write it straight to a file htpasswd -cb /tmp/somefile.pw user password How To Use This In .htaccess AuthUserFile /tmp/somefile.pw AuthName GetLost!! AuthType B........

  • possible SYN flooding on ctid 42131, port 80. Sending cookies. - Solution


    The Linux Kernel interpretated a very high volume of real traffic as a DDOS attack so it basically ends up blocking your web server. possible SYN flooding on ctid 42131, port 80. Sending cookies. Simple fix edit sysctl values for max_syn_backlog sysctl -w net.ipv4.tcp_max_syn_backlog=5000 To make them permanent edit /etc/sysctl.conf echo "net.ipv4.tcp_........

  • Install Windows From a Linux TFTP Server instead of using WDS Solution


    yum -y install samba vi /etc/samba/smb.conf https://www.kernel.org/pub/linux/utils/boot/syslinux/syslinux-6.03.zip mkdir syslinux;cd syslinux;unzip syslinux-6.03.zip mkdir -p /tftpboot/libs/ cp bios/com32/modules/linux.c32 /tftpboot/libs/ cp bios/com32/libutil/libutil.c32 /tftpboot/libs/ cp bios/com32/lib/libcom32.c32 /tftpboot/libs/ #add lib path echo "PATH libs" >> /tftpboot/pxeli........

  • tftp: client does not accept options - solution if you are using UEFI PXEBoot disable it!


    tftp: client does not accept options I spent the good portion of a late evening on this double checking settings that I know always worked right for tftp! This error can also happen if you are trying to boot PXE in UEFImode. Enter your BIOS and change it to "Legacy PXE" or non-UEFI PXE mode and you'll be good to go!........

  • Linux how to view video card make and exact model


    Normally lspci will show you just like this and would suggest they are exactly the same card: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) 1c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7) lspci -vnn is the answer As we can see one is a Gigabyte and the other is an MSI card. Wha........

  • How to Update Linux /usr/share/misc/pci.ids


    This works with lspci and if it's outdated may not give you the exact manufacturer and device model. For example take these 3 different RX 580's: 1a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) 1b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) 1d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7) You ca........

  • How to disable Google Fonts in Wordpress


    edit theme css: Click "Appearance -> Editor -> Stylesheet" http://yourblog.com/wp-admin/theme-editor.php?file=style.css&theme=twentysixteen textarea { color: #1a1a1a; /*font-family: Merriweather, Georgia, serif;*/ font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif........

  • dhcpd.conf how to secure so only known and allowed clients will be given dhcpd IP address leases


    It's really simple and just a matter of the following line within the subnet declaration. deny unknown-clients; See example below: subnet 10.25.20.0 netmask 255.255.255.0 { range 10.25.20.11 10.25.20.254; deny unknown-clients; option routers 10.25.20.10; option domain-name-servers 208.67.222.222;  ........

  • yum how to install old obsolete packages


    This is important as unfortunately Centos may designate a package obsolete and the replacement breaks everything (eg. you have a config file and the new replacement is not at all compatible with it and it breaks your application). This is where disabling obsoletes comes into play, it can be done from yum but it doesn't work at the time I find. yum --setopt=obsoletes=0 install someapp However Ifind it still installs the new app and not the one you ask for........

  • PHP Howto Store Value of Included File Output Into Variable


    ob_start(); include "yourfile.php"; $stored_value=ob_get_clean();........

  • ffmpeg vidstab to stabilize video


    I'm having trouble making it work on very shaky video the result seems kind of warped/blurry/fish eye like and not as good as some other examples I've seen: ffmpeg -i MVI_1285.MOV -vf vidstabdetect=shakiness=10:accuracy=15 -f null MVI_1285.trf ffmpeg -i MVI_1285.MOV -vf vidstabtransform=smoothing=30:input="transforms.trf" MVI_1285.MOV.mp4 I've played around with the shakiness, accuracy etc.. but not the smoothing part.........

  • userdel user userdel: cannot lock /etc/passwd; try again later.


    I am not sure why this happened I think it's because the file was in use by another duplicate process or script. userdel user userdel: cannot lock /etc/passwd; try again later. ........

  • M2Crypto.SSL.Checker.WrongHost: Peer certificate subjectAltName does not match host, expected fedora-archive.ip-connect.vn.ua, got DNS:mirror.ip-connect.vn.ua


    You are using Centos 5 which is deprecated so nothing in yum will work until you follow this post to use the vault: http://realtechtalk.com/Centos_59_Working_Vault_Repo_file-1921-articles yum update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * epel: fedora-archive.ip-connect.vn.ua Traceback........

  • linux cp and mv will not overwrite due to alias!


    This through me for a loop when I would do a cp -rf or mv -f nothing would get overwritten even if piping y or yes to the command. Type alias and you'll see why: alias cp='cp -i' alias l.='ls -d .* --color=auto' alias ll='ls -l --color=auto' alias ls='ls --color=auto' alias mv='mv -i' alias rm='rm -i' The -i is a safeguard against messing things up but however does mess things up worse when you know what........

  • ERROR 2006 (HY000) at line 567: MySQL server has gone away


    mysqldump or mysql query of a larger file/table ERROR 2006 (HY000) at line 567: MySQL server has gone away Add this to /etc/my.cnf max_allowed_packet=64M service mysqld restart........

  • vbulletin 4.2.5 after upgrading from 3.6 white screen fatal php errors


    The code may lead you to believe you have an incompatible template but if you are not trying to use an old template currently that is not the issue. I actually deleted all 3.x style templates to make sure. What the issue is, is old plugins that are not compatible but Vbulletin does not seem to account for this except that you'll see a fatal PHPerror. You should disable all plugins and then enable one by one until you find the one that is causing the issue. &........

  • Linux Unable to mount cifs/smb share in /etc/fstab


    sudo mount -a Unable to find suitable address. [35758.706993] CIFS VFS: Error connecting to socket. Aborting operation. [35758.707247] CIFS VFS: cifs_mount failed w/return code = -111 [35795.476160] CIFS VFS: Error connecting to socket. Aborting operation. [35795.476346] CIFS VFS: cifs_mount failed w/return code = -111 When the above happens "Unable eto find suitable address" it usually means the smb nam........

  • bash Linux how to get first or last letters of a word


    To get the first X letters of a word: It's very simple you can just pipe it to head with -c 1 (gives the first letter and so on) -c2 (2 gives the first 2 letters). echo "dsjfsdlksjdklf;jlsd;kflasdj;kl"|head -c 2 Returns ds To get the last X letters of a word: Now we use tail with -c but it works differently. ........

  • l2tp ipsec VPN Error Sep 12 18:16:25 vps pluto[7299]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 192.5.6.2 port 20640, complainant 192.5.6.2: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated


    Sep 12 18:16:25 vps pluto[7299]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 192.5.6.2 port 20640, complainant 192.5.6.2: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Some say changing the "leftprotoport=17/%any" will fix this but I have not found this to be the case. Essentially it means at least one end is blocking the ipsec packets. Sometimes the %any allows an alt........

  • Centos 5.9 Working Vault Repo file


    Centos 5 is not supported running yum will produce an error like this: YumRepo Error: All mirror URLs are not using ftp, http[s] or file. Eg. Invalid release/ removing mirrorlist with no valid mirrors: /var/cache/yum/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base Solution - Update this file CentOS-Base.repo # CentOS-Base.repo........

  • Disable SSH Password Authentication to Increase Security and Harden SSH Linux Unix Server Ubuntu Mint Centos Debian


    Just a note before you do this you should have a sure, guaranteed way into the system such as local, KVMor preferably publickey making bruteforce SSH absolutely impossible since there is no password to bruteforce and even if someone knew the password they wouldn't be able to login except from the local console (presumably you should make sure no one unauthorized has physical access). 1. Edit /etc/ssh/sshd_config Find the section like this:........

  • Linux bash script to see what connected computers respond to ping


    A great way when moving your equipment to a new location, new router/switch etc to help confirm what MAC has what IP: for ip in `arp -na|awk '{print $2}'|sed s/(//g|sed s/)//g`; do echo ping $ip ping -c 1 -w 1 $ip > /dev/null if [ "$?" == 0 ]; then echo "$ip UP" fi done........

  • rsync specify alternate port non-standard port than 22


    It is not obvious but the rsync --help rsync --help|grep port --port=PORT specify double-colon alternate port number --port does not do anything at all actually for some strange reason it still uses 22 You have to specify a manual ssh command to make it work: -e 'ssh -........

  • tar how to ignore failed reads and not exit


    This is an important feature a failed read can genuinely occur if a temporary file has been removed or if you try backing up a sysetm file in /proc /sys (which you shouldn't really anyway). The way to fix this is the following switch: --ignore-failed-read Example: sudo tar --ignore-failed-read -czvf mycomputer-backup.tar.gz --exclude=/home/otheruser/* --exclude=/proc/* --e........

  • kdenlive titles/text renders as white screen when using .sh script


    When using the .sh script the rendering doesn't work after an upgrade of related packages to kdenlive. kdenlive (kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1)) with affine or composite transitions was fine but is now broken during the time of transition it is just a white screen. The previous version was fine: kdenlive:amd64 (4:17.04.1+git201705191233~ubuntu16.04.1 But now I can't find it or install it:........

  • ffmpeg how to watermark and concatenate in one command


    If you were in my boat you were frustrated that you had to double encode, eg. one separate encode for watermark and a separate from concat and it's not easy to figure out this with ffmpeg on your own. However it is a nice way to save time! ffmpeg -i file1.mp4 -i file2.mp4 -i file3.mp4 -i watermark.png -filter_complex "[0:v]setpts=PTS-STARTPTS[v0]; [1:v]setpts=PTS-STARTPTS[v1]; [2:v]setpts=PTS-STARTPTS[v2]; [v0][0:a][v1][1:a][v2][2:a]concat=n=3:v=1:a=1[v][aout]; [v][3:........

  • Wine uninstalled broken on Linux Mint


    Solution: Aptitude is very smart and fixed the issues it was because of nvidia cuda and opencl and nothing else suggested or hinted this using apt sudo aptitude install wine The following NEW packages will be installed: ocl-icd-libopencl1{ab} ocl-icd-libopencl1:i386{ab} wine wine1.6 wine1.6-amd64{a} wine1.6-i386:i386{a} The following packages will be REMOVED:........

  • ffmpeg trouble concatenating similar but different files


    When things go wrong your video is basically unplayable or the first video plays fine and then freezes when moving on to the next. Generally if both videos weren't produced with the exact 100% same settings you will have issues. You can try the basic concat but it often won't work right. Solution for me: My example uses 3 videos in total so "n=3" and a=1 to include audio. ffmpeg -threads 12 -i file1.mp4 -........

  • ffmpeg Unable to Use Hardware Encoding with Nvidia 3.40 Driver and GT210 card


    I believe from what I've read that this card's driver doesn't support the features after trying all known troubleshooting methods. ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload -c:v hevc_nvenc -profile main -preset slow -rc vbr_hq -c:a copy uservideoRendered.mp4-test ffmpeg -i uservideoRendered.mp4 -filter:v hwupload_cuda,scale_npp=w=1920:h=1080:format=nv12:interp_algo=lanczos,hwdownload........

  • Linux Mint USB Kernel Tainted and Locked Port/Dev File


    Essentially a program I was running for mining did not terminate properly with Ctrl+C it is listed as defunct and cannot be killed, kernel is tainted and normal tricks to disable the port are impossible the dev and sys entries for the device cannot be browsed or interacted with in any form without a lockup of the request. The only solution is to reboot due to the kernel taint as far as I can find so far. [1130246.811056] INFO: task minerd:21861 blocked for more th........

  • ffmpeg Linux Mint download, compile and install howto


    #if you have nvidia make sure you install the nvidia-cuda-toolkit so hardware acceleration can be used wget http://ffmpeg.org/releases/ffmpeg-3.3.2.tar.bz2 tar -jxvf ffmpeg-3.3.2.tar.bz2 cd ffmpeg-3.3.2/ ./configure --disable-yasm install prefix /usr/local source path ........

  • OpenVZ error : Container start failed (try to check kernel messages, e.g. "dmesg | tail") Locked by: pid 166638, cmdline vzctl start 888171


    This container won't start after exhausting its memory. There are no relevant or helpful messages in dmesg or vzctl.log as well. Standard troubleshooting such as disabling PPP etc has not helped. 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Locked by: pid 166029, cmdline vzctl start 888171 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container already locked 2017-07-06T23:33:29-0400 vzctl : CT 888171 : Container was stopped 2017-07........

  • Centos 7 How To Change Hostname


    Some guides still use the old Centos 6 style (do not use /etc/sysconfig/network). In Centos 7 the file is /etc/hostname echo "HOSTNAME=yourhostname.com" > /etc/hostname........

  • Migrate Centos 7 from Single HDD to mdadm RAID 10 array:


    Done on Centos 7.3 very important as clearly based on older guides it was a lot easier and more simpler! Hint do not use grub2-install! If you have trouble booting after this check this CentOS mdadm RAID booting/fixing guide. One huge caveat if you are an oldschool user or sysadmin who has avoided UEFIbooting The nor........

  • How to change reserved blocks in Linux partition


    user@box:~$ sudo tune2fs -l /dev/md99 [sudo] password for user: tune2fs 1.42.9 (4-Feb-2014) Filesystem volume name: Last mounted on: /mnt/md50 Filesystem UUID: 976a8655-2619-4587-878c-dab07f7b7652 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Fi........

  • USB 3.0 External HDD Enclosure Seagate UAS problems - [sdd] tag#1 CDB: Write(16) 8a 00 00 00 00 01 70 04 08 68 00 00 00 08 00 00


    This is a 8TB Seagate external USB 3.0 device apparently newer kernels use a module called "UAS" instead of "USB Storage" which causes issues as a lot of devices are not properly supported in UAS mode by the kernel driver. The solution some say is to disable UAS specifically for your USB device but I'd rather just disable UAS altogether. Solution blacklist UAS: *do not do this it does not work and just causes your USB 3.0........

  • Centos 7 Cudaminer Nvidia setup guide


    I am using a GTX 1060 but replace the download for the driver with the correct/current version for your particular card by visiting: http://www.nvidia.com/Download/index.aspx?lang=en-us yum install automake curl openssl-devel libcurl-devel gcc gcc-c++ yum -y install kernel-devel-`uname -r` yum -y install unzip #the........

  • USB 3.0 PCI x1 Card Review VIA VL805 on Linux Review and Experience


    This is a VIA made VL805 USB 3.0 Chipset with 4-ports and MOLEX powered. First of all this unit was cheap at about only 9 USD with fast shipping. My biggest concern was if this was a quality unit and would it really give you full USB 3.0 speeds (some people reported with similar cards that for some weird r........

  • rsync run as root sudo without password


    This is a common issue, what if a issue shouldn't have root but you want to use that user to make a full backup of a system? They of course need root access. You can actually just give them passwordless sudo access to rsync in /etc/sudoers: sudo vi /etc/sudoers yourusername ALL = NOPASSWD: /usr/bin/rsync Here is how you would execute rsync: The key thing for the remote host is to........

  • Why won't my Linux Mint boot after I manually installed a new kernel?


    Why won't my Linux Mint boot after I manually installed a new kernel? eg. apt-get install linux-image-newerone Do this dpkg -l|grep linux-image|grep extra ii linux-image-extra-3.16.0-38-generic 3.16.0-38.52~14.04.1&nb........

  • cudaminer freezes Linux Mint taints kernel


    When running cudaminer once it tries to initialize the card the entire screen freezes. The computer itself is still running but the Xorg is done for, you cannot even switch to another console window and must reboot (even an mdm or Xorg restart does not help). At first cudaminer will give you these errors: stratrum_recv_line failed ...retry after 15 seconds GPU #0: Geforce 210 with compute ca........

  • Linux Mint Intel Screen Tearing Horizontal Line Solution Fix Intel i915 Intel HD 4400 GPU Debian / Ubuntu


    sudo mkdir -p /etc/X11/xorg.conf.d/ sudo vi /etc/X11/xorg.conf.d/20-intel.conf On newer Ubuntu / Mint / Debian systems the file would go in: /usr/share/X11/xorg.conf.d/20-intel.conf Type "i" and enter the following: Section "Device" Identifier "Intel Graphics" Driver&n........

  • imagemagick pdf convert error solution - **** Warning: can't process font stream, loading font by the name. Can't find CMap Identity-UTF16-H building a CIDDecoding resource. Warning: falling back to Identity ordering **** Error reading a conte


    **** Warning: can't process font stream, loading font by the name. Can't find CMap Identity-UTF16-H building a CIDDecoding resource. Warning: falling back to Identity ordering **** Error reading a content stream. The page may be incomplete. **** File did not complete the page properly and may be damaged. **** This file had errors that were repaired or ignored. ****........

  • php read file into variable


    php read file into variable $content = file_get_contents(home.html); Otherwise if you want to get the source code of the PHP file, it's the same as a .txt file: $content = file_get_contents('/path/to/phpfile.php'); You can also get from URLs: $content = file_get_contents('http://someurl.com/file.txt');........

  • USB Device/MP3 Player not working properly and can't browse the device filesystem? Check the cable twice and again!


    Here is a simple MP3 player and now there's a reason to understand why the supplied cable has some kind of capacitor and is very short. These devices can be VERY finicky and any voltage fluctuation or difference is enough to cause issues. Take for example the error messages from Linux Mint: [804829.895414] usb 1-1: USB disconnect, device number 11 [806961.109030] usb 1-1: new high-speed USB device number 12 using xhci_hcd........

  • Nvidia Linux Mint/Ubuntu screentearing horizontal line solution


    Finally after ages I found the solution which is on many pages on the net but not obvious and should have been standard or more common info! Instant Solution: Type this into the terminal (unfortunately the driver config menu doesn't have the option as itis hidden): nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceCompositionPipeline = On }" Make permanent Cli........

  • Openshot 2.2 is very unstable always crashing in Linux Mint 18.1!


    Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Missing folder chosen by user: Jun 1 15:45:42 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: project_data:INFO Removed missing file: MAH02949.MP4 Jun 1 15:45:57 videoeditor-desktop org.mate.panel.applet.MintMenuAppletFactory[1882]: ui_util:WARNING Icon theme media-playback-start not found. Will use backup........

  • Apache SSL very slow response with Firefox Freezes/Loads Very slow when checking self-signed SSL certificate


    I was sure this was a Centos bug with OpenSSL, Apache, MySQL or even PHP. I tried everything but nothing helped. One clue is that if you check the Apache logs you will see nothing in the access logs until minutes later (this means Firefox has not even passed your request to the remote Apache/htttpd server). When even accepting the invalid certificate message that would show up minutes later when trying to "View the Certificate" Firefox would freeze. This bu........

  • Track 01: 34 of 1726 MB written (fifo 100%) [buf 99%] 3.6x.Errno: 5 (Input/output error), write_g1 scsi sendcmd: cmd timeout after 1.897 (40) s CDB: 2A 00 00 00 44 A9 00 00 1F 00 resid: 6144 cmd finished after 1.897s timeout 40s write track da


    These errors believe it or not are simply because of not being the root user or running with sudo! However if you didn't know to try as root you'd think there was a problem with your burner or disc Essentially it looks like without root you cannot send the required scsi commands to continue writing. Ithink cdrecord should have built-in tests or safeguards to see if it has the permissions to run the required commands. I guess for more advanced users the idea is simila........

  • Intel NUC J3455 Linux Support Ubuntu/Linux Mint Issues


    I get the following error "Installer Crashed" on 18.1 MATE 64-bit when installing by NFS/PXE. Yet it was able to at least detect and use my NIC (perhaps the driver was only activated because of PXE/NFS being used)? When using 18.1 Cinnamon on CD the NIC does not work but the installer did succeed. However it doesn't work right, I can't login graphically and get some Cinnamon OOMerror but how can this be with 8GB of RAM straight from login?........

  • Linux Mint Install Netboot PXE Guide Howto


    *Update so this doesn't work it must be something to do with the path of nfs or something else but the installer fails with "Installer crashed" at the end whereas with the CD/USB it works. This assumes you've already installed and configured a separate PXE/DHCP server somewhere else and your /tftpboot directory is setup. This is for Linux Mint 18.1 but generally applies to most versions although you may have tro change things like "casper"........

  • Coolermaster CM Storm Enable LED Backlight in Fedora/Ubuntu/Mint Linux Howto - MB24 Keyboard and MS2K Mouse


    Just type the following in the bash/terminal shell to enable the blue LED light on the Coolermaster CM Storm keyboard: xset led 3 To make it automatic and permanent execute the following as root: echo "xset led 3" >> /etc/rc.local This is a fairly nice gaming keyboard whichI bought because I type very quickly and the cheap standard keyboards simply can't keep up!........

  • wget how to resume download!


    It's very simple you just use the "-c" switch and wget will resume the file (make sure you are in the same directory) or specify -O /path/to/partialdownload.zip wget -c http://someurl/file.zip........

  • strange vi errors in Linux Mint/Ubuntu line 58: E488: Trailing characters: t_Sbet line 63: E171: Missing :endif


    This happens on any file an even just typing "vi"whereas it never happened before. I suspect an update or environment variable is causing this issue When entering vi I get this weird stuff line 58: E488: Trailing characters: t_Sbet line 63: E171: Missing :endif When exiting vi I get this weird stuff t_Sb=^[[4%?%p1%{1}%=%t........

  • Text Editors - Top Linux Ubuntu/Debian/Mint Options


    1.) gedit/pluma both very good the only thing I wish is that there was an autosave for unsaved documents! The only other competitor which is similar but I prefer less is kwrite (although I think kwrite may have proper autosave) pluma seems to be a renamed gedit yet gedit is still installable on Linux Mint) ........

  • Linux shows my drive as being dead is it really? Buffer I/O error on device sdb, logical block 0 sd 3:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00


    Normally the below would indicate a failing or failed drive. In this case the SATA port was unplugged and sometimes the Linux kernel/motherboard even with AHCIjust don't play nice and can't handle it. What happened is Iplugged in a new drive after removing another one. However the log shows that after the old drive was plugged in the Linux kernel kept complaining thinking the drive was there but not responding properly. This continued even with reseating........

  • Linux Mint/Ubuntu/Debian Nvidia driver becomes slow graphics performance issue


    I've had this issue since Ubuntu 9 and now even on Linux Mint 17 no matter what latest version of the Nvidia proprietary driver that I use. It just becomes slower and slower and only gets better after rebooting or restarting Xorg. Someone here has it as well https://askubuntu.com/questions/822449/graphics-becomes-slow-after-a-while/917886 It's very fru........

  • phpBB3 slow and internal dummy connection


    Using Apache 2.2 and PHP5.6 PHPBB3 is very slow to respond. Actually for some reason it takes so long to even register a log entry in access_log as in several seconds or a few minutes later it shows up in Apache. All other vhosts and Apache access stops working and freezes until the request to access PHPBB3 slowly completes. It seems to randomly be slow if you stop using it whether for posting or reading the forums. I've migrated to different machines including........

  • check if Apache uses worker MPM or prefork MPM


    apachectl -l Compiled in modules: core.c prefork.c http_core.c mod_so.c It is "prefork.c" so in httpd.conf these settings are what you would use (if you use worker.c it won't have any impact): StartServers 2 MinSpareServers 5 MaxSpareServers&nb........

  • text to speech for Linux


    espeak - is horrible and sounds very old and robotic echo "hello there"|espeak #don't know how to use mbrola and plugins cicero jovie just seems to be a graphical interface to espeak There is also sbreader/sapi Google's Text To Speech Works Quite Well #!/bin/bash say() { local IFS=+;/usr/bin/mplayer -ao alsa -really-quiet -noconsolec........

  • How to convert xlsx/xls Excel file into csv


    A lot of times these files seem to lag and be incredibly slow even if just a few dozens rows of data. Here is how you can convert it with "gnumeric": ssconvert file.xlsx file.csv You may get lots of weird errors like this but the conversion seems to work fine: (ssconvert:15244): GLib-GObject-WARNING **: g_object_set_valist: object class 'SheetObjectImage' has no property named 'style'........

  • How to create openssl md5 password hash to use in /etc/shadow using bash


    Very useful in embedded and other non-standard deployments. The above makes a random salt of 14 random characters from /dev/urandom (you can change the -14 to whatever number of characters you want for your salt). openssl passwd -1 -salt `< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-14};echo;` YourPassword Output: $1$eW-ScuyL$f/iKMJ5mbJ..7bSzvX6EO0 How To Create Password Has........

  • Avocent DSR8020 KVM/IP - Network Connect Error - Solution


    This error is commonly due to Java security or TLS settings but there is a second issue with forwarded ports that also causes it. 1. Java Security/TLS Settings issue: This article has the solution to change them all in Linux automatically 2. Port Forwarding Issue if your Avocent DSR is behind NAT/private IP........

  • tar extraction changes ownership of /root directory


    Ihave a tar and when extracting it changes /root to a uid and gid of the source server which is bad especially for /root! You can get around this by extracting as follows: Add the -o switch which means "--no-same-owner" tar -o -zxvf sometar.tar.gz........

  • Centos 7 Migration Guide from Centos 6


    Centos 7 is no cakewalk, there are many fundamental features and basic utilities that are missing or even completely renamed or different! Another shocking thing is to check your NIC it is set by default to not turn on when booting! And by the way there is no more standard eth0 the NIC convention is now "enp0s3" vi /etc/sysconfig/network-scripts/ifcfg-enp0s3........

  • ls in Linux with full directory path with files howto


    Normally an ls will just produce the actual contents of the current or target directory eg. ls mydir myfile1 myfile2 myfile3 But what if you need to find the full or relative path to another program that cares whether that be zip or etc.? You need the "-d" switch and the asterisk inside the actual directory. ls -d mydir/* mydir/myfil........

  • How to verify SSL SHA-1 Certificate Fingerprnit Signature of your mail/web server to avoid hijacking/man-in-the-middle attacks


    This is especially helpful if you run your own servers. If you are presented with an error message or warning that the signature has changed or does not match the IP/domain you are connecting to you always want to verify manually. So your e-mail/web client will show you an SHA-1 fingerprint like this: "Could not verify this certificate because the issuer is unkown" or other reasons such as a mismatch in IP/domain. It will also show you........

  • What happens when you unplug 1 or more devices from an mdadm RAID array to simulate a failure in Linux Ubuntu/Centos/Debian?


    In short the two drives in the array were /dev/sdd and /dev/sde. The kernel sees they were unplugged and have gone down as you can see below. mdadm caught the first one being unplugged /dev/sde and disabled the missing drive. However when the final drive that was part of the array is unplugged it didn't notice at all. Instead it complains about an IO error later for drives that the kernel knows do not exist anymore. [45817.162728] ata4: exception........

  • Migrating from Linux Mint 17.2 mdadm RAID array to a new one (because I upgraded to larger drives).


    1.) Replicate the number of partitions in your new drives. gdisk /dev/sda gdisk /dev/sdb I created 3 partitions of the same same size. partition #1: +1G (/boot) partition #2: +60G (swap) partition #3: rest of it (/) #note if you are using GPT/gdisk you need to create separate a partition at least 1MB in size (in my case I would a 4th partition and mark it type ef02).........

  • ENOM TRANSFER passwords do not match - solution


    The "passwords do not match" implies or makes it appear that your auth code is wrong but actually you have to click "View additional settings" and then see there are 2 password fields to manage the domain once it is transferred (the password is typed twice for confirmation). Simply fill out a password twice or remove the first password fields contents and all will be well.........

  • mdadm: CREATE group disk not found Incrementally started RAID arrays. Incrementally starting RAID arrays...


    mdadm won't boot in Ubuntu/Mint/Debian anymore. You just get the following in a loop: mdadm: CREATE group disk not found Incrementally started RAID arrays. Incrementally starting RAID arrays... mdadm: CREATE group disk not found Incrementally started RAID arrays. Incrementally starting RAID arrays... mdadm: CREATE group disk not found Incrementally started RAID arrays. Incrementally starting RAID arrays... mdadm: CREATE group dis........

  • How to Execute PHP in .html files with Apache in Linux Centos/Debian/Ubuntu etc


    Add this to the .htaccess file #right/working: AddType application/x-httpd-php .html .htm #wrong (won't work in many cases): AddHandler application/x-httpd-php5 .html .htm........

  • yum Packages skipped because of dependency problems:


    Solution: yum -y install --skip-broken package-you-want-to-install Packages skipped because of dependency problems: php56w-mysql-5.6.30-1.w6.x86_64 from webtatic Error: Multilib version problems found. This often means that the root cause is something else and multilib version checking is just pointing out that there is........

  • Using a proxy with yum in Centos 6


    Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 12: Timeout on http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds') Error: Cannot find a valid baseurl for repo: base You would think this should be fine and simple like using a proxy with most other software? However........

  • How Do you Open/Extract .WARC Internet Archive Files on Linux Ubuntu/Mint/Centos?


    Get the python "warc extractor" from here. WARC just seems to be such an unnecessary and complicated format. Why not use tar, rar, zip etc...? ./warc-extractor.py -dump content !http:content-type:pdf yourfile.warc........

  • mdadm and lvm how to completely disable and remove vg/pv/lv


    In short the solution is just to use vgremove for the actual /dev/mapper device: vgremove /dev/mapper/backups-backuplv box mnt # mdadm --manage /dev/md8 --stop mdadm: Cannot get exclusive access to /dev/md8:Perhaps a running process, mounted filesystem or active volume group? box mnt # lv lvchange lvconvert lvcreate l........

  • mdadm frozen and doesn't realize array is dead/missing failed due to unplugged drives


    This was a surprising bug but I unplugged all drives for an array md127. At first it was just 1 drive and mdadm seemed to notice this. I unplugged the second drive taking the array offline but mdadm did not realize it was offline and still showed a non-existent disk as being part of it. This created problems trying to unmount it or even to stop this array with mdadm freezing. As for how to fix it I can only think of making sure you are not in a mounted path of........

  • Unable to mount location Failed to retrieve share list from server: No such file or directory solution


    Cannot even "Browse Network" when clicking on "Windows Network" Unable to mount location Failed to retrieve share list from server: No such file or directory logs: [2017/02/14 00:16:44.271314, 0] ../source3/nmbd/nmbd.c:58(terminate) Got SIGTERM: going down... [2017/02/13 17:35:41.797944, 0] ../lib/util/become_daemon.c:124(daemon_ready) &........

  • mdadm how to make inactive array active


    This happens when you assemble array it doesn't mean it will be active for many reasons: md20 : inactive sdf1[2](S) 732442488 blocks super 1.2 Solution: sudo mdadm --manage /dev/md20 --run........

  • Centos 5 OpenSSL does not support TLS 1.2 Apache Error


    [Thu Jan 26 14:13:31 2017] [notice] caught SIGTERM, shutting down [Thu Jan 26 14:14:00 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Jan 26 14:14:00 2017] [error] Server certificate is expired: 'Server-Cert' [Thu Jan 26 14:14:00 2017] [notice] SSL FIPS mode disabled [Thu Jan 26 14:14:07 2017] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Jan 26 14:14:07 2017] [error] Server certificate is expired: 'Server-Ce........

  • DRBD Split-brain solution


    Uh oh [17925926.174277] block drbd0: Handshake successful: Agreed network protocol version 96 [17925926.174325] block drbd0: conn( WFConnection -> WFReportParams ) [17925926.174342] block drbd0: Starting asender thread (from drbd0_receiver [1682]) [17925926.174432] block drbd0: data-integrity-alg: [17925926.174581] block drbd0: drbd_sync_handshake: [17925926.174586] block drbd0: self 2AAE66AF9252D6DB:2815BF........

  • How to Properly Secure SSL/TLS Apache Settings against Heartbleed Poodle (TLS) Poodle (SSLv3) FREAK BEAST CRIME


    Many users still are not aware but simply patching OpenSSL does not secure you against many known and easy to exploit attacks that will render your encryption useless by an attacker. Use the following setings in /etc/httpd/conf.d/ssl.conf SSLCipherSuite "EECDH+ECDSA+AESGCM EECDH+aRSA+AESGCM EECDH+ECDSA+SHA384 EECDH+ECDSA+SHA256 EECDH+aRSA+SHA384 EECDH+aRSA+SHA256 EECDH EDH+aRSA !CAMELLIA !SEED !3DES !RC4 !aNULL !eNULL !LOW !MD5 !EXP !PSK !........

  • K9 Mail Android Cannot See or View E-mails Disappear after reading - with Dovecot server. Solution


    This actually only happened after an e-mail server ran out of space due to run away log files. Normal Desktop clients were not affected. It appeared to be a bug in K9 mail but even reinstalling/wiping all settings did not fix it (read e-mails would still not reappear). This is moreso a bug in Dovecot where it probably messes up the index files. How do you fix this in Dovecot/your e-mail server? You need to delete the do........

  • Setting Up System for First Use... Please Wait... - WHMCS Installer


    This happens sometimes that it takes a fair amount of time for some WHMCS installations but it usually ends up completing eventually.........

  • ERROR 2013 (HY000): Lost connection to MySQL server during query


    The solution is simple but strange, if you copy your /var/lib/mysql directory to another server and think it will work, be sure to check if you have /var/log/mysql and binary log files. If you do, the server will not work and will give you errors like below and crash without the proper log files. UPDATE user SET password=password("newpass") WHERE user='root'; flush privileges; ERROR 2013 (HY000): Lost connection to MySQL server durin........

  • if script bash check if socket file (mysql.sock) exists


    The "-S" switch is important as it works with sockets if you use "-f" it will not detect the socket file is there. if [ ! -S "/var/lib/mysql/mysql.sock" ]; then echo "Socket does not exist, restarting" service mysqld restart fi........

  • ioncube loader install howto on PHP/Centos


    Disclaimer, before starting this I do not like ioncube, it is great to protect your source code, but a big pain to setup this extension since it has to be done manually. Further, fi you do a PHPupdate ioncube may no longer work, causing important sites or services to not work (I wish authors would take another approach). 1.) Download from here:https://www.ioncube.com/loaders.php 2.) Extract the contents and co........

  • apc_shm_attach: shmat failed: in Unknown on line 0 & apc_shm_create: shmget(0, 67108864, 914) failed PHP Solution


    PHP Fatal error: PHP Startup: apc_shm_create: shmget(0, 67108864, 914) failed: Invalid argument. It is possible that the chosen SHM segment size is higher than the operation system allows. Linux has usually a default limit of 32MB per segment. in Unknown on line 0 PHP Fatal error: PHP Startup: apc_shm_attach: shmat failed: in Unknown on line 0 This error is not at all fun because it actually prevents Apache/httpd from starting or working at all. It will........

  • MySQLD Server shutdown remotely unexpectedly


    170110 5:35:23 [Note] /usr/libexec/mysqld: Normal shutdown 170110 5:35:23 [Note] Event Scheduler: Purging the queue. 0 events 170110 5:35:23 InnoDB: Starting shutdown... 170110 5:35:24 InnoDB: Shutdown completed; log sequence number 0 12765401 170110 5:35:24 [Note] /usr/libexec/mysqld: Shutdown complete 170110 05:35:24 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended........

  • cPanel Install Error kernel ipv6 module support solution


    2017-01-12 14:25:36 529 (ERROR): The installer was unable to verify that your kernel supports IPv6. 2017-01-12 14:25:36 530 (ERROR): The message received when trying to create an IPv6 socket was Address already in use 2017-01-12 14:25:36 531 (ERROR): Please ensure that the ipv6 module is enabled and loaded in your kernel. 2017-01-12 14:25:36 532 (FATAL): Exiting... Solution This happened........

  • PayPal Subscription Howto Creation Automatic Payments Manual


    An easy way to pay companies and friends/family since PayPal does not have an option when sending money to make it a subscription: "business" = The e-mail or PayPal ID of the person/organization to pay to. a3 The recurring amount "eg. 115" will be 115 USD p3 The time period (eg. 2) t3 Unit of time period m=monthly,w=weekly,y=yearly item_name = "the note/product service reason you are paying ha........

  • bind/named rndc: connect failed: 127.0.0.1#953: connection refused (solution)


    service named status rndc: connect failed: 127.0.0.1#953: connection refused named (pid 10557) is running... This issue is normally caused by a permissions issue where named doesn't have the permissions to read the rndc.key. Check /var/log/messages: Jan 4 17:06:22 storagebox named[10753]: none:0: open: /etc/rndc.key: permission denied Jan 4 17:06:22 storagebox named[10........

  • PYCURL ERROR 22 - The requested URL returned error: 404 Not Found Solution


    # yum -y install qemu-kvm Loaded plugins: fastestmirror Setting up Install Process Loading mirror speeds from cached hostfile * base: mirror.lzu.edu.cn * elrepo: ftp.utexas.edu * epel: ftp.jaist.ac.jp * extras: mirrors.aliyun.com * openvz-kernel-rhel6: mirror.fdcservers.net * openvz-utils: mirror.fdcservers.net * updates: mirrors.nwsuaf.edu.cn Resolving Dependencies........

  • fdisk wq causes hung process


    I created a new partition table on a newly plugged in device and it caused fdisk to hang (even force kill does not work). It also may be a bad drive or some other issue because fdisk -l hangs after the first 2 HDDs (totaly of 8 HDDs on this system): [1232879.903596] INFO: task fdisk:27176 blocked for more than 120 seconds. [1232879.903607] Tainted: P&nbs........

  • mdadm kernel panic if trying to change --layout on a RAID10


    It is already known this is not possible mdadm --create /dev/md3 --level 10 --layout=f2 --raid-devices=2 /dev/sdc1 /dev/sdd1 mdadm: /dev/sdc1 appears to be part of a raid array: level=raid10 devices=2 ctime=Sat Dec 24 18:44:29 2016 mdadm: /dev/sdd1 appears to be part of a raid array: level=raid10 devices=2 ctime=Sat Dec 24 18:44:29 2016 Continue creating ar........

  • remove gpt partition linux


    sudo fdisk /dev/sdh WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util fdisk doesn't support GPT. Use GNU Parted. WARNING: The size of this disk is 8.0 TB (8001563221504 bytes). DOS partition table format can not be used on drives for volumes larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID partition table format (GPT). The device presents a l........

  • iptables how to forward localhost port to remote public IP


    iptables -t nat -A OUTPUT -m addrtype --src-type LOCAL --dst-type LOCAL -p tcp --dport 3306 -j DNAT --to-destination ip.ip.ip.ip iptables -t nat -A POSTROUTING -m addrtype --src-type LOCAL --dst-type UNICAST -j MASQUERADE sysctl -w net.ipv4.conf.all.route_localnet=1 Make sure you substitute "ip.ip.ip.ip" for your real public IP and also the "--dport 3306" for the port you want to forward. Finally run the sysctl command and........

  • mcp55 NIC not working at boot on Centos 6.6-6.8


    forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X forcedeth 0000:00:08.0: eth0: MSI enabled forcedeth 0000:00:08.0: eth0: no link during initialization ADDRCONF(NETDEV_UP): eth0: link is not ready forcedeth 0000:00:08.0: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Dec 1 18:21:32 box15 kernel: forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. Dec 1 18:21:32 box15 kernel........

  • OpenVZ mass ip update


    The file ipupdate.txt should look like this: ip.ip.ip.ip ctid while read -r; do ip=$REPLY setip=`echo $ip|awk '{print $1}'` ctid=`echo $ip|awk '{print $2}'` echo "vzctl set $ctid --ipadd $setip --save" vzctl set $ctid --ipadd $setip --save done < ipupdate.txt........

  • Centos extremely secure iptables setup


    If you want to make sure only a certain IP can access your server for any service or protocol here is a way to do it (just be sure you have access to the IP(s) mentioned or you will be locked out). iptables -F iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp -s IP.IP.IP.IP -j ACCEPT iptables -A INPUT -j DROP serv........

  • OpenVZ Solution CPT ERR: c02fa000,73 :CPT: lock fd is closed incorrectly: 1 and vps-net_add ERROR: Unable to add route ip route add 192.168.5.2 dev venet0


    The only solution after trying many suggestions was to simply restart the "vz" service (definitely not preferable). Even doing an ifdown and ifup for venet0 did not help. ifup venet0 Bringing up interface venet0: Configuring interface venet0: net.ipv4.conf.venet0.send_redirects = 0 RTNETLINK answers: Network is down Some errors from log: CPT ERR: d2dc60........

  • mdadm change wrong device name md127 fix and solution in Linux


    md127 issue, it should be /dev/md3 per mdadm.conf Any time something is mounted as md127 it almost always means there is no entry for this mdadm array in the mdadm.conf in initramfs (which is separate from your actual /etc/mdadm.conf). cat /etc/mdadm.conf ARRAY /dev/md3 metadata=1.2 UUID=b6722845:381cc94e:7a2c5b5f:8e3b7c4f The reason for this is something strange, most Linux OS's bizarrely always keep their own copy of /etc/mdadm.con........

  • /dev/drbd0: State change failed: (-2) Need access to UpToDate data solution


    Everytime I've seen this error "/dev/drbd0: State change failed: (-2) Need access to UpToDate data" it is because DRBD has no disk: cat /proc/drbd version: 8.3.13 (api:88/proto:86-96) GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51 0: cs:Connected ro:Secondary/Secondary ds:Diskless/Inconsistent A r----- ns:0 nr:0 dw:0 dr:0 al........

  • forcedeth MCP55 Nforce3600 Nvidia Network NIC Card Not working in Linux at 1gigabit speeds


    Now many people report this card simply not working in various Linux distros and kernels. My issue is different, it always works at 100mbit (eg. plugged into a 100mbit switch) but no matter what 1000M/gigabit switch I would try, it would never work. The link would be up (the lights were on) and the OS detected the link as being up as well but it wouldn't work at all and could not pass data in or out (not even a ack/ping). There is one simple solution and command........

  • How to Normalize and Increase the Volume on M4A files in Linux


    M4A is a weird format, so you have to be creative here is a quick copy of what I did. Basically you need to convert to .wav to make use of them and thenI converted the resulting .wav into an mp3 (nice small file size and basically universally playable): ======= sudo apt-get install mpg321 mp3gain faad normalize lame faad "Voice 002 (copy).m4a" faad "Voice 002 (copy).m4a"........

  • DRBD Slow Performance - 99.99 % [jbd2/drbd0-8] highiowait solution


    Tired of checking iotop and seeing that your drbd partition is using 99.99% of io all the time and finding your drbd device performs slow in general? This is especially an issue in versions of DRBD in the 8.3 tree in particular one documented case is on "8.3.13" but it likely applies to other devices. The symptoms are that resyncing is fine and normal but any reasonable amount of activity is very slow and lagged and creates a high server load and con........

  • cPanel how to change main IP to fix licensing issue


    Your cPanel may not work if you enter your non-main IP when setting it up. The way to fix it is to go back to the setup screen by removing the following file: rm /etc/.whostgrft........

  • Linux How To Recover Partition Table from Kernel and Restore Centos/Debian etc..


    We've all done this at some point, you work on the wrong shell window and this was my first time making this mistake but I deleted a partition table in fdisk, recreated it and saved it with "wq" and even ran partprobe! If you haven't rebooted yet then you can still recover your partition table, otherwise you're in big trouble. Fortunately since it was a live system and in use the kernel still had to use the old table like below:........

  • OpenVZ Migration Hostnode Containers from Centos 5 to Centos 6


    migrating from an old OpenVZ (Centos 5) to new OpenVZ (Centos 6) Also if migrating from 32-bit HN to 64-bit your RAM will probably be much bigger than it should be! 16x bigger eg. 32bit HN: total used free shared buffers cached Mem:&nb........

  • Linux Mint 17 How to Enable File Sharing Option in File Manager


    I still cannot understand how this would not be enabled by default and I struggled to find the reason why with manually installing samba etc.. wondering why the option for sharing was not in the menu. On Linux Mint "MATE" the package is called "caja-share" and on Cinnamon it is called "nemo-share" so edit the below command as necessary: *Also note that the "samba" package is necessary as it is not inst........

  • Openvz error solutions Container already locked (error) can't lock quota file, some quota operations are performing for id 1200


    rm /vz/lock/1200.lck rm: remove regular file `/vz/lock/1200.lck'? y vzctl start 1200 Container already locked vzctl start 1200 Starting container ... vzquota : (error) can't lock quota file, some quota operations are performing for id 1200 vzquota on failed [7] vzquota off 1200 vzctl start 1200 vzquota on 1200 root@rttbox ~]# vzquota off 1200 vzquota : (........

  • blocked for more than 120 seconds issues with iowait and timeout on Live Linux distribution while writing to physical disk


    This happened while an mdadm array was syncing, all access from writing a new blank file to opening a small .txt file was very slow: [222117.312078] kjournald starting. Commit interval 5 seconds [222117.685060] EXT3-fs (md0): using internal journal [222117.685096] EXT3-fs (md0): mounted filesystem with ordered data mode [222122.376847] kjournald starting. Commit interval 5 seconds [222122.602825] EXT3-fs (md2): using internal jour........

  • SELinux targeted policy relabel is required


    You may get this after a long time of not rebooting but especially if you have rsync'd a / partition or deployed an image to another VPS or computer, you will often have this issue. The good thing it usually just takes a reboot. Here is more info from Centos........

  • possible SYN flooding on port 80. Sending cookies.


    Errors like this are shown on high usage servers and ports so it is common to see it on http and even imap ports: possible SYN flooding on port 80. Sending cookies. The Linux kernel will even detect flooding on OpenVZ containers: possible SYN flooding on ctid 6000, port 993. Sending cookies. In many cases this is not an issue and is more so simply a result of regular, but high usage traffic.........

  • mdadm how to create mdadm.conf config file


    It is as simple as the command below, it will then update your mdadm.conf or create it in /etc/mdadm.conf mdadm --detail --brief --scan > /etc/mdadm.conf ........

  • Apache Centos Stopping httpd: [ OK ] Starting httpd: [Wed Jun 29 19:29:44 2016] [warn] _default_ VirtualHost overlap on port 80, the first has precedence [Wed Jun 29 19:29:44 2016] [warn] _default_ Virtual


    Stopping httpd: [ OK ] Starting httpd: [Wed Jun 29 19:29:44 2016] [warn] _default_ VirtualHost overlap on port 80, the first has precedence [Wed Jun 29 19:29:44 2016] [warn] _default_ VirtualHost overlap on........

  • The connection was reset The connection to the server was reset while the page was loading.


    In Firefox I cannot connect to any website, proxy is disabled and outside network access is confirmed, no system or manual proxy was set on this Linux Mint/Ubuntu system. Normally this can be caused by proxy or DNS problems and the weird thing is that traceroute and ping to other IPs worked fine but even connecting to sites by IP was not working. The connection was reset The connection to the server was reset while the page was loading.........

  • Openvz kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3)


    kernel: [10186978.064405] TCP: time wait bucket table overflow (CT3) Varying opinions are out there but in general it seems like the most common culprit is a lack of privvmpages, with a modern OpenVZ system the best way is to set privvmpages as equal to what your RAM is and this has resolved the messages on another system. If it's truly a TCP issue you can adjust the following parameters:........

  • astrachat connection problems in Android 5.01 Lollipop


    I wanted to use Astrachat because it seems to be the only app that has video, pic and file sharing for Jabber butI cannot even connect despite any other client working fine including Xabber and others. astrachat "Oops.. We can't connect to the account that you provide above. Please recheck your account detail". Unfortunately to make it worse there doesn't seem to be any error log or more details about the issue. The jab........

  • sed how to avoid escaping


    sed gets to be a pain and a real mess and is hard to read and understand when you have to escape things like / etc. Idid not realize until recently that you don't need to use / as a separator, you can use virtually any non letter or number character. Eg we have used # as the separator to avoid having to escape the forward slashes and in this way the command is plain, easy to understand, edit and saves time/hassle without the need for escaping. sed -i s#http........

  • Ubuntu/Debian OpenVZ Template Problems No Networking and SSH not starting


    It all comes down to a bug essentially where you are running an older kernel that doesn't support the newer Debian templates. The solution is to update your OpenVZ kernel. Here are some symptoms of the problem/lack of kernel support: Ubuntu Template 12.04 requires a manual network start: service networking start sshd will not start: /usr/sbin/sshd PRNG is not seeded mknod /dev/random c 1 8........

  • HTML files in Apache still displaying as raw text even with DefaultType, ForceType etc.


    There was only one solution here and it was the following: edit /etc/httpd/conf/httpd.conf Comment the lines for the Mime Magic Module: # MIMEMagicFile /usr/share/magic.mime # MIMEMagicFile conf/magic *Don't forget to restart Apache and clear your browser cache twice I was using DefaultType and ForceType a........

  • wget ignore robots.txt howto


    wget -e robots=off It is as simple as the above and this is something one must watch out carefully when using wget because you may think you have archived or downloaded content when you never did due to a nofollow/robots.txt statement.........

  • Uploading Error HTTP error. Wordpress Upload Error Solution


    When you start uploading larger images in Wordpress you have to make sure your maximum attachment size is large enough and that the execution time is not too short: Uploading Error HTTP error. [Thu May 12 16:32:25 2016] [error] [client 10.10.5.2] PHP Fatal error: Maximum execution time of 30 seconds exceeded in /httpdocs/blog/wp-includes/class-wp-image-editor-gd.php on line 182 Solution Edit p........

  • mysql_real_escape_string returns an empty string solution


    This is a common mistake but many people do not realize this function comes from mysql itself, so therefore you need an active mysql connection open. Usually the string will be empty and null when you call it from outside of the database connection portion of your code. eg. an example of the wrong way and creating a null/empty string $var = mysql_real_escape_string($myself) mysql_connect(); // returns n........

  • Centos and obfsproxy install errors


    pip install obfsproxy /usr/lib/python2.6/site-packages/pip/_vendor/requests/packages/urllib3/util/ssl_.py:90: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning. InsecurePlatformWarning You are using pip version 7.1.0, however version 8.1.1 i........

  • How to modify HTML/Themeforest Themes to work in any path statically using unix/linux's sed command


    For themes and custom CMS setups, the typical HTML theme is not ready to go at all but here are some common sed commands (search and replace that will get most of them working without breaking as you'd expect). The problem is that often the theme directory will be separate from the content and this will break the relative paths that these themes use. sed -i s/'href="'/'href="/themes/yourtheme/'/g index.html sed -i s/'src="'/'src="/themes/y........

  • cp copy all contents of directory to another one including hidden files and folders howto


    cp -a /your/source/. /your/dest/ -a preserves all file atributes and symlinks the "." at the end of /source/ includes all hidden files such as .htacess, .bash_history, .ssh etc.. The / in /dest/ makes sure the contents go into it instead of replacing /dest itself (eg. if you did not have the / at the end).........

  • Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so:


    Stopping httpd: [FAILED] Starting httpd: httpd: Syntax error on line 73 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/mod_file_cache.so into server: /etc/httpd/modules/mod_file_cache.so: cannot open shared obje........

  • esniper error on Linux Mint 17.2 Debian/Ubuntu: Cannot connect to URL : SSL connect error: gnutls_handshake() failed: Illegal parameter Retrying... esniper encountered a bug. It looks like your esniper version is not current. You have version 2.28


    Auction 262382440107: Cannot connect to URL : SSL connect error: gnutls_handshake() failed: Illegal parameter Retrying... esniper encountered a bug. It looks like your esniper version is not current. You have version 2.28.0, the newest version is 2.31.0. Please go to http://esniper.sf.net/ and update your copy of esniper.........

  • Nvidia Linux Card not working due to LSI 9200/SAS2008 IRQ conflict


    At first my BIOS said the card may not work right because there is no more option ROM space. I disabled the Option ROM for both LSI 1068 and 2008 chipsets, Network Boot ROM and most other PCI slots, Serial Port, etc... and the message went away but the card still does not work properly. But it still cannot initialize the card properly(does not work): [ 33.943272] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:........

  • Apache Vhost HowTo Serve Same Content using a different domain and IP


    There are a few ways of doing this and all basically involve using the reverse proxy or "ProxyPass" feature of Apache to accomplish it. 1.) Create a normal vhost and simply symlink the root directory of the site you want to mirror. Eg. originalsite.com and newsite.com /vhosts/originalsite.com/httpdocs You would symlink like this: ln -s /vhosts/originalsite.com/httpdocs vhosts/originalsite.com/........

  • Check Linux Ubuntu/Debian/Mint Version from Command Line


    To check the version of Ubuntu just use the lsb_release command as shown below and you will be able to see the exact Ubuntu version you have installed. lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty........

  • iptables: Applying firewall rules: iptables-restore: line 40 failed


    service iptables start iptables: Applying firewall rules: iptables-restore: line 40 failed [FAILED]........

  • Linksys E2500 DD-WRT Upgrade Instructions and Enabling 5ghz with Tomato Firmware


    1.) Flash directly to this file: http://tomato.groov.pl/download/K26RT-N/build5x-132-EN/Linksys%20E-series/tomato-E2500-NVRAM60K-1.28.RT-N5x-MIPSR2-132-Max.zip *I was never able to get the larger "Mega" file to work, at least not initially so I recommend the file above. To enable 5ghz I had to do the "Clear NVRAM" Option before it was shown. 2.) Or if you don't need 5ghz (most devices do not support it and cannot........

  • A start job is running for /etc/rc.local Compatibility


    According to this and my own experience it is the case that you have started something running in the foreground or a server that does not terminate with a normal rc.d script. The server will reboot once you kill whatever command or process that is.........

  • Linux Mint/Ubuntu/Debian Dual NICs networks problem when enabling and disabling one device


    The Scenario You have dual NICs and you disable NIC1 which uses 192.168.1.1 as its gateway. With NIC2 you enable it/connect it to another network which also has the gateway 192.168.1.1 Everything will work fine at this point. When switching back to NIC1 even with NIC2 disabled and even unplugged, the OS basically can't pick up the new/updated ARP entry of the old device for 192.168.1.1 and perhaps thinks it is a security risk or spoof of some sorts and blocks i........

  • Linux Mint Network Manager Connection Disconnect Option Grayed Out


    This is a real pain because I had to manually unplug ethernet cables for network testing or to use an alternate network or guarantee physical access to one network segment is cut off. For some reason this happened after Ikilled dbus because it was confused and blocking packets thinking they were coming from the wrong interface since eth0 and eth1 both had the same subnet and gateway. I eventually did a "service network-manager restart" but the option was........

  • Errors were found while checking the disk drive for /.


    Iwill start by saying I think I know what caused this boot-time error on Linux Mint but should also apply to Debian and Ubuntu. I changed my BIOS time to several hours in the past to match the current time, but this caused Linux to think there were incorrect filesystem times. The problem is that it seems when you hit this I am not sure what is happening, it doesn't seem to be doing fsck and hangs without prompting the user. What I have found is that........

  • Redirect www host to non-www Linux Apache modrewrite


    The below forces all request to your domain to go to the main non-www root domain. Updated code: RewriteCond %{HTTP_HOST} !=domain.com RewriteRule ^(.*)$ https://newurl.com/subdir/$1 [R=301,L] If you don't want it to go to a subdirectory: RewriteCond %{HTTP_HOST} !=domain.com RewriteRule ^(.*)$ https://newurl.com/$1 [R=301,L] Bad code: This code is bad beca........

  • Force SSL for all URLs Apache htaccess modrewrite


    The best way is as below in .htaccess using modrewrite, any request that is not SSL will be redirected to https://domain.com and the exact same URL RewriteCond %{SERVER_PORT} 80 RewriteRule ^(.*)$ https://domain.com/$1 [R=301,L]........

  • Debian Ubuntu Mint Samba Share config file location


    /var/lib/samba/usershares But note that it is just simple file sharing if you need directory mask, create mask etc... you still need to edit the smb.conf file to create your share. Here is an example file: comment= usershare_acl=S-1-1-0:R,S-1-22-1-1000:F guest_ok=y sharename=BabyPhotos........

  • Debian Linux Ubuntu Mint connect to pptp from terminal bash shell


    apt-get install pptp-linux echo "yourvpnusername * yourpasspass *" >> /etc/ppp/chap-secrets vi /etc/ppp/peers/provpnaccounts.com enter (ignore the lines): ============ pty "pptp server.provpnaccounts.com --nolaunchpppd" name testuser #remotename PPTP require-mppe-128 file /etc/ppp/options.pptp ==========........

  • Linux Debian/Ubuntu/Centos How To Force Internet Traffic Through PPTP L2TP OpenVPN Account Only


    The following assumes the computer is local/physical to you and/or it always has a LANIP so it can be accessed on site without having a default gateway. The key to this is not to set a default gateway for your computer or you can set a script on boot or other time to delete the gateway (where eth0 is the NIC you are using): route del default eth0 50.80.20.2 is the VPN server you connect to 192.168.1.1 is your........

  • vi Debian Linux Ubuntu Mint arrow key problem linux ssh bash shell terminal


    Debian/Ubuntu vi keyboard problem, up and down arrows do not work and instead make an A (Up), B (Down), C (Right) or D(Left). The working solution (you could also add the set nocompatible to /etc/vim/vimrc to make it system wide-will not be applied until reboot I believe): echo "set nocompatible" > ~/.vimr........

  • Is this partition table correct starting and ending partition on same cylinder?


    Device Boot Start End Blocks Id System /dev/sdc1 1 132 1060256+ fd Linux raid autodetect Partition 1 does not end on cylinder boundary. Partition 1 does not start........

  • Vbox Cannot register the hard disk


    Cannot register the hard disk '/media/Debian8.vdi' {d01efabc-aacf-4614-b29c} because a hard disk '/home/VirtualBox VMs/Debian/Debian8.vdi' with UUID {d01efabc-aacf-4614-b29} already exists. This is what happens if you move the VDI to another location. The easiest way is to delete/remove the machine from VBOX and then reimport it from the new location.........

  • Avocent 8020 KVM Java Icedtea Viewer


    This command in Debian/Ubuntu/Mint will get everything need installed for most Java based KVM viewers: sudo apt install icedtea-netx The following additional packages will be installed: ca-certificates-java icedtea-netx-common openjdk-8-jre openjdk-8-jre-headless It seems every other updated version of Java or Icedtea breaks things and I will save the frustration of Java for another post.........

  • Centos Add Multiple IP Addresses in a range without manually setting each static IP


    This is actually very simple and this example assumes your network device is "eth0" In Centos your network config would be the following: /etc/sysconfig/network-scripts/ifcfg-eth0 Take the same path and just add a "-range0" So to add a range create the following file: /etc/sysconfig/network-scripts/ifcfg-eth0-range0 IPADDR_START=192.168.1.50 IPADD........

  • Centos installing grub problems suspect gpt problem


    grub> root (hd0,0) root (hd0,0) Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) But if you do: root (hd1,0) setup (hd1) it does work, I think hd0/sda had a GPT partition that was not removed properly (what I did was just dd bs=512 count=1 the partition table from another drive since the partition table should be identical). Checking if "/boot/grub/........

  • Cannot get mono to work properly on Linux Mint


    mono/wine not working in Ubuntu/Linux Mint/Debian: The assembly mscorlib.dll was not found or could not be loaded. It should have been installed in the `/usr/lib/mono/2.0/mscorlib.dll' directory. solution: sudo apt-get install mono-complete Problems: mono does not work well for even simple things like a Winrar self extracting .exe fi........

  • Virtualbox Error


    In plain English this happens after you upgrade VBOX and it rebuilds kernel modules based on a newer kernel than you are running (eg. you upgraded your kernel but haven't booted into it). It is too bad there is not a standard work around that would allow it to realize this and keep old kernel modules and use them if it detects your current kernel is older than the most recently build modules. =============== RTR3InitEx failed with rc=-1912 (rc=-1912) The........

  • How to get/display full path to file in Linux/Unix


    It is just the readlink command with the -f switch and it will display the full path, very handy to save time when you want to copy and paste the location of a file or script etc.. readlink -f updatehtaccess.sh /var/lib/updatehtaccess.sh ........

  • CPanel Cannot Login HTTP error 401 You do not have permission to access this page.


    HTTP error 401 You do not have permission to access this page. It was actually a bad hosts entry or where your IP was somehow added to /etc/hosts.deny this is what you will see from CPanel........

  • How to manually mount Linux disk image partition without using losetup


    In this case we want to mount partition #2 fdisk -lu Centos-6.6-x86_64.img You must set cylinders. You can do this from the extra functions menu. Disk Centos-6.6-x86_64.img: 0 MB, 0 bytes 255 heads, 63 sectors/track, 0 cylinders, total 0 sectors Units = sectors of 1 * 512 = 512 bytes Device Boot&nbs........

  • Debian 8 Jessie in Linux OpenVZ Container does not work on Centos host


    It sounds like this is corrected in later versions of the OpenVZ kernel but Iam not sure, it may also be that a much newer kernel is needed and Centos may not have a recent enough kernel. *Debain 7.0 however does work fine as a temporary fix or work around. Debian 8 OpenVZ no IP and networking not working: lo Link encap:Local Loopback  ........

  • How to scp transfer a file in Linux with spaces


    Say you have a path like this "/some/path/here with spaces/". If you try to transfer it you will get a message along the lines of: scp -rp 192.168.0.12:"/some/path/here space/" . scp: /some/path/here: No such file or directory scp: space: No such file or directory You can escape each space but what a pain that is especially if you have multiple spaces in the path. The simplest way is to use the follow........

  • unfortunately lg keyboard has stopped - LG Phone Keyboard Issue


    This seems to effect many other LG phones , specifically their keyboard app and basically makes your phone unusable where you cannot use the keyboard because that message keeps popping up and the keyboard will not load. unfortunately lg keyboard has stopped solution: 1. Go to your settings and manage apps and find the LG Keyboard app: 2. Stop it from running, delete all data and clear all cache. After the above you will probably find that your........

  • mdadm real example of recovery and rebuilding of the array on Centos 6


    In this example we have 2 drives in a RAID array and /dev/sdb is the one that failed. /dev/sda1 is also the /boot partition which we tell grub to install on /dev/sdb eg install root (hd0,0) /dev/sda1 on the new drive /dev/sdb (hd1) First copy the partition table from /dev/sda to /dev/sdb dd if=/dev/sda of=/dev/sdb bs=512 count=1 Run partprobe to detect the new partition table partprobe........

  • Centos 6 how to guide convert LVM non-RAID into mdadm 1/10 RAID array live without reinstalling


    Here is the scenario you or a client have a remote machine that was installed as a standard/default minimal Centos 6.x machine on a single disk with LVM for whatever reason. Often many people do not know how to install it to a RAID array so it is common to have this problem and why reinstall if you don't need to? In some cases on a remote system you can't easily reinstall without physical or KVM access. So in this case you add a second physical or disk or already ha........

  • openvz yum problem Centos 6.5 cannot find file on mirror:


    #solution Edit /etc/yum.repos.d/openvz.repo For the first two entries comment out #mirrorlist and uncomment #baseurl and then it worked openvz yum problem Centos 6.5 cannot find file on mirror: yum update Loaded plugins: fastestmirror Determining fastest mirrors * openvz-kernel-rhel6: mirrors.ustc.edu.cn * openvz-utils: mirrors.ustc.edu.cn base ........

  • mount -o bind permanent in /etc/fstab howto


    mount -o bind /somedir /anotherdir In /etc/fstab /somedir /anotherdir none bind 0 0........

  • Virtualbox errors on Ubuntu/Debian/Mint


    The solution was to reinstall the vbox dkms package and do a manual modprobe of the modules it makes. I never sorted out the unable to start due to the USB issue, I did have the guest additions installed but the only way to boot was to change the pointing device from USB to PS2 and then to disable the USB controller (if your pointing device is set as USB, disabling USB will not work because it will re-enable by default when it sees your pointing device is USB, this is w........

  • How To Install Linux Mint 17.2 on mdadm RAID with a separate boot partition


    Iwas surprised to see that Linux Mint at the latest 17.2 version still has NO mdadm installer option, and worse the installer will not be able to create a proper booting environment even when you do install it. How to setup mdadm in Linux mint LiveCD sudo su apt-get install mdadm # partition as you need and then create your mdadm devices # create your SWAP md0 mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /d........

  • Linux sudo config sudoers to run command without a password howto


    Before reading on remember to put the line at the bottom of /etc/sudoers as from experience what happen is that other rules cancel out what you have added. If your sudoers setup is correct it will work immediately upon saving without requiring a reboot. Edit /etc/sudoers yourusername ALL = NOPASSWD: /path/to/command *Once again remember the above should be on the bottom of the sudoers file or........

  • ONVIF Linux Security Camera Setup


    First of all this seems to apply to many ONVIF devices Hard coded IP: 192.168.1.10 (yes not kidding no DHCP!) 00:12:12:9C:C2:00 To view RTSP stream use VLC, or openRTSP or other RTSP capable software: rtsp://192.168.1.10/user=admin_password=tlJwpbo6_channel=1_stream=0.sdp user: admin password: blank http://ip/Login.htm Uses Quicktime and is a poor quality picture and slow Cannot change pass........

  • clamav freshclam out of date won't update solution


    freshclam ERROR: Can't open /var/log/clamav/freshclam.log in append mode (check permissions!). ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log). Tue Oct 13 13:49:35 2015 -> WARNING: Incremental update failed, trying to download daily.cvd Tue Oct 13 13:49:35 2015 -> WARNING: Can't download daily.cvd from db.local.clamav.net Tue Oct 13 13:49:35 2015 -> Trying again in 5 secs...........

  • Installing zoneminder on Ubuntu/Debian Linux Howto


    sudo apt-get install zoneminder [sudo] password for one: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libuser-perl python-evince kdebase-apps kwrite unixodbc libgnomeprint2.2-data python-soappy vgabios python-metacity hddtemp python-mediaprof........

  • status: { DRDY ERR } error: { ICRC ABRT } failed command: WRITE FPDMA QUEUED MCP55 Linux Errors


    [ 2868.041375] ata1: EH in SWNCQ mode,QC:qc_active 0x40 sactive 0x40 [ 2868.041554] ata1: SWNCQ:qc_active 0x40 defer_bits 0x0 last_issue_tag 0x6 [ 2868.041556] dhfis 0x40 dmafis 0x40 sdbfis 0x20 [ 2868.041874] ata1: ATA_REG 0x41 ERR_REG 0x84 [ 2868.042013] ata1: tag : dhfis dmafis sdbfis sactive [ 2868.042163] ata1: tag 0x6: 1 1 0 1 [ 2868.042301] ata1.00: exception Emask 0x1 SAct 0x40 SErr 0x400000 action 0x6 frozen [........

  • bash script get directory location and path of script howto tutorial


    So the situaton is this, you depend on things being relevant to where your bash script is and to be safe you want it to be dynamic (eg. do not hard code that we switch to /abc/dir but rather detect where script.sh is located). scriptlocation="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" The path is then contained the the variable "scriptlocation" so you can cd to it in your script etc............

  • Centos/obfsproxy errors


    I never did get it working, it is too bad as obfsproxy should really be an option and integrated into the OpenVPN client and server or something similar: yum -y install python-pip python-devel No package python-pip available. #install the EPEL repo python-pip install obfsproxy python-pip install obfsproxy -bash: python-pip: command not found pip install obfsproxy &........

  • OpenVZ Install Guide Again / Quick Setup


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl #enable ip_forward sed -i s/'net.ipv4.ip_forward = 0'/'net.ipv4.ip_forward = 1'/g /etc/sysctl.conf #all interfaces should not send redirects echo "net.ipv4.conf.default.send_redirects = 1" >> /etc/sysctl.conf echo "net.ipv4.co........

  • mdadm create raid10 array with only 2 drives


    mdadm --create /dev/md1 --level 10 --raid-devices=2 /dev/sdb2 /dev/sdc2 --layout=f2 --metadata=0.90 Note that layout=f2 or layout=n2 is very important as without it you'll get a complaint like this: mdadm --create /dev/md0 --level 10 --raid-devices /dev/sdb1 /dev/sdc1 missing missing mdadm: invalid number of raid devices: /dev/sdb1 It is basically more like a prop........

  • Openvz Enable netadmin


    vzctl set $CTID --devnodes net/tun:rw --capability net_admin:on --save........

  • Centos yum mirror problem error "[Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found""


    [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found" The above happened when for some reason all the mirrors in my cache didn't have the files (some mirrors only keep the latest version of Centos). Itried to block them all but that didn't help because it seemed the mirrors were all hardcoded no matter what I tried. Here is how to fix it and reset your mirror list in Centos cd /var/cac........

  • ssh session and port forward or reverse port matching or assocation howto


    Use netstat with the -anpe option. The e option shows the inodes and I do not know if it will always work or if it was by fluke but I was dealing with dozens of SSHsessions and needed to know which session was related to which forward (the PIDs of the SSHand SSHD did not match etc...) Notice the "59560675" and "59560762" those are almost identical, if you find two sets that are nearly identical except for the last 3 digits they may match (in my ca........

  • yum how to blacklist and exclude mirrors


    vi /etc/yum/pluginconf.d/fastestmirror.conf exclude=.hk,.cn You could also use specific domains but as you can see above we are blacklisting all Hong Kong and Chinese mirrors in this example.........

  • ECC Errors in action


    Message from syslogd@server at Sep 14 11:35:59 ... kernel:[Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB. Message from syslogd@server at Sep 14 11:35:59 ... kernel:[Hardware Error]: Error Status: Corrected error, no action required. Message from syslogd@server at Sep 14 11:35:59 ... kernel:[Hardware Error]: CPU:6 (10:8:0) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc00400021080813........

  • HP Procurve Switch 2824 CLI Telnet Experience , Guide and Tutorial


    ------------------------------------- ProCurve J4903A Switch 2824 Software revision I.10.77 Copyright (C) 1991-2009 Hewlett-Packard Co. All Rights Reserved. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by the Government is subject to restrictions........

  • rm how to delete a file with -- 2 leading dashes


    rm -- --filename Ironically if the solution is two leading dashes as shown above but this applies for other stubborn file names.........

  • Linux check NIC ethernet port network card speed


    ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full ........

  • HP XW9400 Motherboard In Desktop Issues


    Fortunately the format is EATX so an EATX case will work and the screw layout is standard. You will need to remove the HEX/TORX screws that are connecting the stock HP standoffs (meant to slide into an HP case). XW9400 Motherboard Issues Size: 12" x 13" Proprietary Power Connector Proprietary CPU Power Connector Proprietary Memory Power Connector Fan connectors are 4 pin so you will need some kind of adapter.........

  • tar list files


    tar -ztvf flashrom.tar.gz the "z"is for gzip, if it is not gzip remove the z. If it is bzip then use "j" instead of "z" etc..........

  • tar do not overwrite files


    It is as simple as using the "-k" option for: -k, --keep-old-files don't replace existing files when extracting --keep-newer-files don't replace existing files that are newer than thei........

  • Dell CS24-NV7 lspci dmidecode info


    0000:00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2) 0000:00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a3) 0000:00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a3) 0000:00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1) 0000:00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2) 0000:00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 0000:00:05.1 I........

  • Dell CS24,FS12 NV5 and NV7 1U Server Information & Parts


    Motherboard: Gigabyte GA-3CESL: http://b2b.gigabyte.com/products/product-page.aspx?pid=2658#dl Dell Part Numbers for the motherboard: R1232 R1232L R2232S SERVER MOTHERBOARD GENUINE 408P9 CN-0408P9 GA-3CESL Manual Download here RAMSlots: 16 (8 controlled by each CPU) RAMType: DDR2 ECC 5300P........

  • bash string substitution


    so in this case we have files named like this: track01.cdda.wav.mp3 track06.cdda.wav.mp3 track11.cdda.wav.mp3 track02.cdda.wav.mp3 track07.cdda.wav.mp3 track12.cdda.wav.mp3 track03.cdda.wav.mp3 track08.cdda.wav.mp3 track13.cdda.wav.mp3 track04.cdda.wav.mp3 track09.cdda.wav.mp3 track05.cdda.wav.mp3 track10.cdda.wav.mp3 but we want to rename them so they are like "05.........

  • Centos OpenDKIM & Postfix Setup Guidel


    #from epel repo yum -y install opendkim chkconfig opendkim on cd /etc/opendkim/keys opendkim-genkey -vd mail.server.com opendkim-genkey: generating private key opendkim-genkey: private key written to default.private opendkim-genkey: extracting public key opendkim-genkey: DNS TXT record written to default.txt ........

  • The redirect URI in the request: urn:ietf:wg:oauth:2.0:oob can only be used by a Client ID for native application. It is not allowed for the 'WEB' client type.


    You need to set your application type as "Desktop" even though this would sound counterintuitive.........

  • dir2slideshow Centos rpm requirements


    yum -y install dvdauthor ffmpeg mjpegtools sox bc rpm -ivh dvd-slideshow-0.8.4-2.noarch.rpm Preparing... ########################################### [100%] 1:dvd-slideshow ########################################### [100%] /usr/bin/dir2slideshow: line 553: bc: command not f........

  • bash script delete all non-English characters


    #remove non english characters from file: sed -i 's/[d128-d255]//g' file.txt........

  • Lost connection to MySQL server during query [2013]


    This happened while trying to delete several thousand users from phpBB and basically corrupted the innoDB tables. InnoDB: Page lsn 3 881164362, low 4 bytes of lsn at page end 881164362 InnoDB: Page number (if stored to page already) 86920, InnoDB: space id (if created with >= MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 700 InnoDB: (index "tid_post_time" of table "phpBBdb2005"."phpbb3_p........

  • Error: Cannot retrieve metalink for repository: epel. Please verify its path and try again


    Error: Cannot retrieve metalink for repository: epel. Please verify its path and try again You have to upgrade the ca-certs for epel but need to disable it before that can happen. yum upgrade ca-certificates --disablerepo=epel........

  • bash script how to do wildcard string comparisons or matching


    This is a feature that works very well in bash and is easy to do: *Remember you need the double brackets for this specific test even though a normal if would not require them variable="hi there" if [[ "$variable" = hi* ]]; then echo "yes it contains hi" fi........

  • bash script check if file exists


    It is very simple and like this to test for the existence of file using bash scripting: if [ -f /etc/somefile ]; then echo "yes it exists" fi........

  • bash script linux how to do a wildcard string comparison


    if [[ "$templatesource" == *windows* ]]; then partition=/dev/sda2 fi The * before and after * windows will match this "Ihavelotsofwindowshere" Of we could have used "windows*" and anything that starts with "windows" will be matched etc...........

  • Windows 2012 Server R2 Install Error "windows cannot find the microsoft license terms windows 2012 server install"


    windows cannot find the microsoft license terms windows 2012 server install This is actually because you are using less than 576MB of RAM. In my case I was installing on a KVM VPS with 512MB of RAM. This issue would apply to any physical or virtual server with less than 576MB of RAM. This includes Virtualized VPS Servers with XENHVM, KVM, VBOX, VMWare etc.. or Dedicated Servers with such little RAM. It's very misleading of course since it has not........

  • cPanel how to force reinstall rpms and fix packages and other problems caused by updates or duplicate rpms


    If a service is not working and resetting it to defaults is not working and you get bizarre error messages it is probably a broken update and possibly duplicate package. Take in this case "exim" not working even after resetting to defaults. Check for duplicates: rpm -aq|grep exim ........

  • kvm how to add secondary cdrom drive


    This is useful if you are installing Windows and need virtio but of course Windows needs the virtio driver which is on a second iso. This is the line of code you would add to your kvm startup script and then you get this iso as second cdrom you can browse to for your Windows install of virtio driver's or whatever other use you need it for. -drive file=/kvmtemplates/virtio-win-0.1-94.iso,media=cdrom........

  • Dell CS24SC Server Info


    Dell CS24SC Info 0000:00:00.0 Host bridge: Intel Corporation 5100 Chipset Memory Controller Hub (rev 90) 0000:00:02.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x8 Port 2-3 (rev 90) 0000:00:03.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 3 (rev 90) 0000:00:04.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x16 Port 4-7 (rev 90) 0000:00:05.0 PCI bridge: Intel Corporation 5100 Chipset PCI Express x4 Port 5 (rev 90)........

  • Dell CS10-F1D Server Info lspci Linux specs


    0000:00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1) 0000:00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) 0000:00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) 0000:00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1) 0000:00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4........

  • Linux disable firmware prevents NIC/Ethernet from working phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.


    [ 17.208336] tg3 0000:08:00.0: eth0: Link is up at 1000 Mbps, full duplex [ 17.210194] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX [ 76.000065] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 76.002332] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 86.736004] eth0: no IPv6 routers present [ 148.960038] phy0 -> rt2x00lib_request_fi........

  • VPN Account Buyers Guide and General Info


    What matters most about VPNproviders in 2024? We are highly suspicious of VERYLARGE VPN providers that have LOW PRICES and HUGE DISCOUNTS. The suspicion is that for those who know what costs are involved to purchase thousands of IPs and servers are not small. At the prices that many of the big mainstream providers offer, it is likely unprofitable or barely profitable. Then, how are those companies making money or is that even the goal? There use........

  • KVM/QEMU how to boot from direct kernel vmlinuz and initrd with networking


    Thsi is very handy when doing your own kernel development. -m specifies how much ram (in the example it is 768MB) -kernel specifies the path to the kernel file -net tap,ifname=tap1,script=no (the ifname=tap1 is what you need to change and setup manually). *Run "tunctl -b" to create a tap device and use the one it gives you for ifname= Enable networking to the outside like this: *Note we assume that your bridge is br0 i........

  • How to install grub on virtio KVM with Linux


    I messed up the bootloader by accident on a standard Centos 6.3 install because I turned the /dev/vda1 boot partition into an mdadm raid 1. This was all done correctly aside from one point Ididn't realize was an issue metadata=00.90 is the only thing that will allow you to boot (otherwise grub won't work and you won't boot). So the next step is rescue mode from a CD right? The problem you will find is that grub does not detect your hard drives, this is Ibelieve is be........

  • cPanel How to set SSL and Dedicated IP in cPanel


    Account Functions -> Change Site's IP Address Choose the domain and then click "Change" Choose the new IP 1.) Setup SSL Certificate in cPanel Click on "SSL/TLS Manager" under the "Security" section. 2.) Under " Private Keys (KEY)" Click "Generate, view, upload, or delete your private keys." Choose "Key Size: 4096........

  • OpenVZ vzctl update changes how iptables work - iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. updated solution


    Are you getting the same old error message even though your iptables settings for OpenVZ are correct? iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. The reason is because in newer vzctl the old way of setting IPTABLES="" in vz.conf is completely deprecated (I spent some time fiddling wondering why my settings were correct but........

  • Wordpress Plugin manual install how-to


    This is the most secure way since we don't know if using the built-in ftp method of Wordpress is secure (that is do they store, record or transmit the ftp login information to a third party like the NSA?). Upload or wget the plugin and then unzip it from the Wordpress website tot he following path of your wordpress: /yourwordpressinstall/wp-content/plugins Then navigate to the "Plugins" section on the left side o........

  • Disable linux bash proxy ENV export variable


    if you type Export and see something like this: declare -x all_proxy="socks://127.0.0.1:22000/" Most sites assume and tell you to check your .bashrc or /etc/profile /etc/bash.bashrc which may not apply if you've unknowingly or forgot that you setup a proxy from your GUI such as Gnome. To check in Gnome if you have a permanent proxy do the following: System -> Settings -> Network Proxy........

  • PHP Issues with Joomla Strict Standards: Non-static method JLoader::import() should not be called statically


    This is basically caused by upgrading PHPto a new version like 5.4 when you had 5.2 before and an old version of Joomla. The only solution is to upgrade Joomla or downgrade PHP, both of which can be a pain. Strict Standards: Non-static method JLoader::import() should not be called statically in /home/userdir/public_html/libraries/joomla/import.php on line 29 Strict Standards: Non-static method JLoader::register() should not be ca........

  • esniper and curl errors https://signin.ebay.com/ws/eBayISAPI.dll?SignIn: Couldn't connect to server: couldn't connect to host


    I kept thinking it was esniper but somehow my bash settings have a preset proxy that was creating the issue. https://signin.ebay.com/ws/eBayISAPI.dll?SignIn: Couldn't connect to server: couldn't connect to host curl manually to any URL is the same: curl: (7) couldn't connect to host Run curl with -vvvvvv mode to see the issue: curl -vvvvvvvvvv http://realtechtalk.com * About to c........

  • Disable cphulk in CPanel if you can't login even with the right password


    It's a great feature to ward off bruteforce but is also annoying because you think you have the wrong password when you can't login. How to Disable cp hulk for 5 minutes /usr/local/cpanel/etc/init/stopcphulkd........

  • Centos automatic ifcfg-eth0 scripts based on list of IPs from bash


    It's a basic script that reads the file "ips.txt" in the current directory and then creates a corresponding ifcfg file     #!/bin/bash GATEWAY=192.168.1.1 NETMASK=255.255.255.0 device=eth0 counter=0 for ips in `cat ips.txt`; do........

  • Vbox/Virtualbox devices grayed out for non-root user solution


    It is a permissions issue that is hard to fix. All but one USB device is greyed out. I am already a member of "vboxusers" I have already enabled and disabled USB support for the guest. I have already reinstalled the latest VBOx guest editions If running as root it all works fine Changing........

  • NS_ERROR_FAILURE (0x80004005) The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.


    The solution is to run '/etc/init.d/vboxdrv setup' and sometimes happens when upgrading VBox and the kernel modules don't get upgraded with it. Sometimes the above doesn't work until you reboot because sometimes other unknown processes (even the file manager possibly) may be locking the old module from being unloaded. Failed to open a session for the virtual machine XP. The virtual machine 'XP' has terminated unexpectedly during startup with exit code 1.........

  • Samsung Printer Password Login to change settings CLP


    First of all to find your IP you can hold the "X" button for a few seconds and it will print out the DHCP IP. Another way to find the IP that I prefer is to login to your router or switch and find a hostname that says something like "SEC001599CD2948" which will be your Samsung printer (at least for the C3xx or C4xx series of Samsung printers). The login and password for Samsung Syncthru Webservice:........

  • bash shellshock how to manually patch when there is no update for Centos/Debian/Ubuntu/Fedora


    wget http://ftp.gnu.org/gnu/bash/bash-4.3.tar.gz tar xzvf bash-4.3.tar.gz cd bash-4.3/ wget --no-directories --level 1 --recursive http://ftp.gnu.org/gnu/bash/bash-4.3-patches/ for patch in `ls bash43-*|grep -v .sig$`; do echo applying "$patch" patch -p0 < $patch done ./configure;make;make install #it will install to /usr/bin/bash but if your bash is somewhere else you need to overwrite the old one.........

  • How to root and unlock S4 in Canada Bell/Rogers/Telus/Fido I337 4.4.2


    i337 Canada on Bell is hard to root or even install TWRP Installed TWRP from Odin and my computer gave me the bluescreen at the end but it seemed to be successful (after ODIN said reset). TWRP mode does not seem to enter, instead you get the Android recovery mode with Volume up + Home http://galaxys4root.com/galaxy-s4-root/how-to-root-att-or-verizon-galaxy-s4-on-android-4-4-2/ 1.)........

  • OpenVZ Howto disable ploop and switch back to SIMFS


    It's simple, just edit /etc/vz/vz.conf and add or change the following: VE_LAYOUT=simfs........

  • firefox android text size inconsistent large and small text size solution


    This is very annoying and also hard for web developers who want to see how things look on Android. You may be fooled into thinking you have an unclosed bracket or incompatible code but this is the "text inflation feature" which I feel should be disabled by default. It works so inconsitently that one block of text will appear small while the other will be huge and is quite annoying. The solution is simple Settings ->Display and &q........

  • Openvz iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. solution


    iptables -t nat -A PREROUTING -p tcp -m tcp -d 192.168.2.1/32 --dport 3389 -j DNAT --to-destination 192.168.5.2:3389 iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. The above is often because you don't have the correct modules loaded on the hostnode or enabled for the container but in some cases it's actually a weird openvz setting. Che........

  • Postfix Errors & Solutions "unprivileged": bad value: "???" - bad transport type:


    Aug 25 16:43:24 evohostingtor postfix/master[19471]: fatal: /etc/postfix/master.cf: line 24: field "unprivileged": bad value: "???" Solution: I had the wrong thick dashes when c&ping (just retype them with your keyboard) Aug 25 16:47:10 mailbox postfix/master[24498]: fatal: /etc/postfix/master.cf: line 25: bad transport type: syslog_name=postfix/auth-cleanup auth-cleanup unix n - - - 0 cleanup #-o syslog_name=postfix/........

  • Postfix how to secure outgoing authenticated e-mails for privacy and hide the IP address, mailer and other things


    The most common solution is to use the /etc/postfix/header_checks but this is a big problem. Why is header_checks a problem? Because it does it to all mail whether incoming or outgoing and whether authenticated or not. We of course want as much header information for incoming as we can get for many reasons but many organizations want to secure and make their mail clients as secure as possible. I adapted this solution to the client's custom config, they are configur........

  • Samsung Galaxy Note Upgrade/Update Experience from 4.0.4 with aftermarket ROMs


    It really seems that 4.4.4 is not ready or stable for the i717 yet and this makes sense since it takes a lot of work/development and testing to get the factory stock ROMs working well. In the end I used the 4.1.2 based Blackstra BlackJelly because it was fast, stable and just works and feels great. The aftermarket support is great but many devs are focussed on adding features and customization that most of us don't want or need rather than getting things smooth and stable.........

  • PayPal subscriptions automatically cancelling after creation of profile


    There is a weird quirk with how this works, but there is a variable called "src" that defaults to 0 or disabled if not specified as 1. The default 0 means not to recur billing on a subscription.  It's too bad it's not more obvious anywhere nor is there an explanation or warning during payment or after to both the seller and buyer. Here's a proper subscription code example that does recur and does not cancel........

  • 2CO/2Checkout Howto Enable IPN/Notification Setup & Script Info


    https://www.2checkout.com/documentation/notifications/order-created It shows all the parameters that get passed so you can make a simple script to process it. To enable 2CONotifications you need to do the following: Login Browse to the top right to an icon that looks like a "circle with horizontal lines inside" - Notifications. Enter the appropriate URL for your IPN/Notification processing script (........

  • 2CO/2Checkout how to create recurring payment subscription button dynamically


    It was hard to find this as I find most online payment processors don't just put the basic information in plain view. Remember to set your sid (your seller id). The below can easily be turned into a scripted PHP template to integrate into your own custom or existing payment solution. http://help.2checkout.com/articles/How_to/How-to-Sell-Recurring-Products-with-2Checkout/........

  • Thunderbird Error An error occurred while loading or saving configuration information for thunderbird. Some of your configuration settings may not work properly.


    This error seems to happen randomly and especially when trying to send e-mails. Apparently it's a long-standing GNome bug but is also partially the default of Thunderbird depending on who you ask. There is no known fix that I'm aware of except to upgrade gnome and the gvfs package but this is not an option for older versions/distributions. An error occurred while loading or saving configuration information for thunderbird. Some of your configuration settings may not........

  • CPanel Link to all of the command line options


    CPanel says you can access 98% of the functions through CLI which experienced Unix/Linux admins prefer for simplicity and for scripting.  I've never found CPanel easy to use from the admin panel, it seems everything is hard to find and a simple task becomes a series of hunts. So for people like me here's the list: http://cpanel.net/system-administrators/command-line-scrip........

  • PayPal Convert BuyNow Button to Plain HTML Link


    Say if you have a form/button like this: ........

  • Ubuntu Linux Slow/Delayed SSH ping response Solution


    I've only ever seen this in Ubuntu for some reason and it is because of the /etc/nsswitch.conf settings. So the issue is that if the hostname's reverse DNS cannot be found that you need to go back to DNS which was not the default in this nsswitch.conf file for some strange reason. Edit /etc/nsswitch.conf and replace your "hosts" line with this: #hosts: files dns mdns4_minimal [NOTFOUND=return] mdns........

  • phpBB create new email hash manually when modifying or adding user manually directly through MySQL


    Many may ask why would you need to do this? When upgrading from phpBB 2 to 3 the conversion does not keep the admin user you create. If your old admin user has an email address associated that no longer works or is accessible this makes it impossible to reset the admin password. Some may just say "I'll just manually edit the e-mail address" but it won't work and phpBB will fail to find that user if you don't update the "user_email_hash" field but how do........

  • cp ignore symlink and copy the actual file


    This can be very tricky, say you are doing development on a file that is symlinked. Doing a "cp dev.file dev.file-bk" won't do what you expect, it just links back to the same file so you haven't copied or backed anything up. You need the "-H" switch to copy the actual file that is referenced by the symlink: cp -Hdev.file dev.file-bk........

  • drbd 8.3 hard drive failure recovery example


    drbd 8.3 hard drive failure recovery drbdadm attach r0 DRBD module version: 8.3.10 userland version: 8.3.8 you should upgrade your drbd tools! 0: Failure: (119) No valid meta-data signature found. ==> Use 'drbdadm create-md res' to initialize meta-data area. ........

  • Argument list too long solution - rm -rf new/* -bash: /bin/rm: Argument list too long


    Have you ever tried to run a command like rm to delete several hundred thousand files? Iam not sure what the limit is but any time it is exceeded you need to use a work around like below (which will delete any number of files). Solution find . -maxdepth 1 -name "*.*" -print0 | xargs -0 rm........

  • The Best NoSQL Solution


    To first start off, there are many misconceptions about NoSQL and especially its strengths and weaknesses. Even the popular NoSQL solution MongoDB is fraught with issues that no one seems to be concerned about aside from a few but there are serious issues with database integrity and verified writes. MySQL was considered dangerous or incomplete at one point without having the transactional safety features of Oracle for example. However the NoSQLimplementations seem........

  • WHMCS Sending Blank E-mails Solution


    After the "latest" update one of our clients asked us to figure out the issue and it turns out it is related to the mail settings. Basically all e-mails were being sent with blank text/no body. The solution Go to "Setup ->General Settings ->Mail" and just click on "Save" and it will work again. Note that this assumes you didn't break things yourself by changing any settings. WHMCS may tell y........

  • How to update Open Office in Ubuntu/Debian if your repository is outdated or no longer supported


    http://sourceforge.net/projects/apacheoo-deb/files/debian/dists/wheezy/main/binary-i386/ To install AOO on your computer, you need to add the following entry to the /etc/apt/sources.list file: deb http://downloads.sourceforge.net/project/apacheoo-deb/debian wheezy main sudo apt-get update && sudo apt-get install openoffice-en* openoffice-brand-writer openoffice-brand-calc openoffice-brand-impress openoffice-brand-base open........

  • drbd won't create device if previous partition is on it Command 'drbdmeta 0 v08 /dev/md160 internal create-md' terminated with exit code 40


    This is what fixed it: [root@box13 ~]# dd if=/dev/zero of=/dev/md160 bs=512 count=500 Basically you need to wipe out more than just the 512 byte partition table so 512 bytes * 500 is more than enough to make DRBD happy and think the partition is now empty. The reason this happens is because it gets confused when there is a previous partition with data on the device you are using. root@box13 ~]# d........

  • drbd won't sync 8.3.13 on OpenVZ kernel


    I used the matching 8.3.13 utilities and it didn't work but strangely the newer 8.3.16 which makes DRBD complain works just fine. GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51  0: cs:SyncSource ro:Secondary/Primary ds:UpToDate/Inconsistent A r-----     ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5236960   &am........

  • heartbeat compile errors with rpmbuild


    c1: warnings being treated as errors stonith_signal.h:34: error: 'stonith_signal_set_simple_handler' defined but not used gmake[3]: *** [apcmaster.lo] Error 1 gmake[3]: Leaving directory `/root/rpmbuild/BUILD/heartbeat-1.2.4/lib/plugins/stonith' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/root/rpmbuild/BUILD/heartbeat-1.2.4/lib/plugins' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/root/rpmbuild/BUI........

  • LVM Tutorial how to create a Physical Volume (PV), Volume Group (vg), and a Logical Volume (LV) within it


    # first we need a physical volume which we use the pvcreate tool to create # I create mine on /dev/sdb3 pvcreate /dev/sdb3 dev_is_mpath: failed to get device for 8:19 Physical volume "/dev/sdb3" successfully created # pvdisplay shows the newly created volume pvdisplay "/dev/sdb3" is a new physical volume of "1.35 TiB" --- NEW Physical volume --- PV N........

  • Howto Convert Xen Image to KVM


    #count=10000 makes an image of 10000MB make sure your image is at least the same as your existing dd if=/dev/zero of=yourimage.img bs=1M count=10000 # losetup -fv newimage.raw # fdisk -cu /dev/loop0 # kpartx -a /dev/loop0 # dd if= of=/dev/mapper/loop0p1 # e2fsck -f /dev/mapper/loop0p1 # resize2fs /dev/mapper/loop0p1 # a lot of guides tell you to edit /etc/fst........

  • "Detecting hardware, please wait..." Ubuntu Install Error Solution


    "Detecting hardware, please wait..." Solution This occurs if you are installing with low RAM such as 128MB Bump it up at least to 512MB for the install........

  • Asterisk VOIP Sipura/Linksys PAP2T Calls Not Being Received Solution


    This problem seemed to happen recently but was likely causing issues before where the phone(s) do not ring. Now there are a few reasons why this can happen especially if your adapter has DND mode enabled (disable it). However that wasn't my issue and Ionly figured it out the other day when by fluke if you're on the phone (making a call) then calls will come in. That's when Ifigured out the solution: This likely app........

  • OpenVZ mismatched kernel and dev when compiling.


    ./configure ./configure: line 91: cd: /lib/modules/2.6.32-042stab084.25/build: No such file or directory Error: kernel version not found. Please make sure your kernel is configured. dr-xr-xr-x. 4 root root 4096 Feb 21 06:13 .. lrwxrwxrwx 1 root root 45 Feb 21 06:13 build -> ../../../usr/src/kernels/2.6.32-042stab084.25 drwxr-xr-x 2 root root 4096 Feb 12 20........

  • How to read a conf file without the comments


    cat /etc/some.conf|grep -Ev '^#|^;|^$' This assumes that comments start with # or ; (adjust as necessary). Also note that the ^$ omits blank lines.........

  • yum Centos 386 and 64 bit conflict resolution


    This can happen when you install RPMForge or other repos with the wrong architecture and here's how you fix it (simply uninstalling won't usually fix it): solution yum clean all yum -y install openvpn Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile * base: mirror.its.sfu.ca * extras: centos.mirror.nexicom.net * rpmforge: mirror.cpsc.ucalgary.ca * up........

  • OpenVZ Quick Install Copy & Paste for Centos 6


    yum -y install wget wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ yum -y install vzkernel vzctl After that just reboot and you may also have to enable ip_forward in /etc/sysctl.conf........

  • nf_conntrack: table full, dropping packet solution


    nf_conntrack: table full, dropping packet The above in some cases I've seen is a sign of a DOS attack or can occur if users are using services like torrenting, proxy, VPNetc... Do not take it lightly as the above can knock a server offline if the table becomes full and I've also seen full crashes and kernel panics shortly after. ........

  • yum error installing php solution - exclude php from being installed from third party repos


    Error: Package: php-Monolog-dynamo-1.7.0-1.el6.noarch (epel) Requires: php-aws-sdk Error: php-pecl-zendopcache conflicts with 1:php-eaccelerator-0.9.6.1-1.el6.x86_64 Error: php-xcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64 Error: php-pecl-zendopcache conflicts with php-pecl-apc-3.1.9-2.el6.x86_64 Error: Package: php-horde-Horde-Vfs-2.1.2-2.el6.noarch (epel) &n........

  • CPanel Apache httpd won't start solution: Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf: Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration


    root@hkhosting [/]# service httpd start Starting httpd: Syntax error on line 2 of /etc/httpd/conf/httpd.conf: Invalid command 'Alias', perhaps misspelled or defined by a module not included in the server configuration ........

  • Setting Ulimit


    I never found a solution to do it live (nothing worked that I found) so it looks like a relogin is required. Check your maximum file limit cat /proc/sys/fs/file-max 824460 This is different than your actual's user limit which you'll see below ulimit -n 1024 Try and set it higher but it won't work ulimit -n 65000........

  • Centos Howto Upgrade to PHP 5.3 from 5.2


    It's not as simple as "yum install" as you can see below and it doesn't stop there. yum install php53 Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: mirror.us.leaseweb.net * extras: centos.mirror.rafal.ca * updates: centos.mirror.nexicom.net * base: centos.mirror.nexicom.net * addons: centos.mirror.nexicom.net Setting up Install Process........

  • cPanel VPS Server Cannot Login as root


    I was worried the server was hacked, I was logged in already as root but couldn't login to CPanel or a new SSHsession. I even reset the password from the shell and it did not work still. The reason is CPanel Hulk, it detected a brute-force attack so it locked down the root account entirely even from the correct password. According to cPanel the best way around this is to whitelist your IP.........

  • [emerg] (28)No space left on device: Couldn't create accept lock (/etc/httpd/logs/accept.lock.15449) (5) solution


    [Wed Jan 08 18:50:07 2014] [emerg] (28)No space left on device: Couldn't create accept lock (/etc/httpd/logs/accept.lock.15449) (5) This may happen when trying to restart Apache and you find it dies right after starting and check /var/log/httpd/error_logs. What is the cause of this? You could be out of disk space (if you're not then see #2 and below) You're out of Semaphores, you need to kill all the old ones.........

  • What a hdd hard drive and mdadm RAID array failure looks like in Linux


    [3805108.257042] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [3805108.257052] sd 0:0:0:0: [sda] Write Protect is off [3805108.257054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [3805108.257066] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [3805108.257083] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [3805108.257090] sd 0:0:0:0: [sda] Write Protect is off........

  • PHP does not reload the php.ini setttings until the webserver is restarted


    Just in case anyone is wondering that is the case, it can make troubleshooting impossible if you're making changes to php.ini but don't realize the webserver must be restarted for those changes to apply (contrary to running php-cgi which always looks up the current .ini settings).........

  • PHP Warning: imagecreatefromjpeg(): gd-jpeg, libjpeg: recoverable error: Premature end of JPEG file


    I was having an issue with only certain random/jpeg files with the functions imagecreatefromjpeg imagecreatetruecolor and other related ones. This issue was annoying basically it seems like a libgd issue/bug with newer versions of PHP and it was difficult to trace-out. One very useful thing that helped me was using "php-cgi" and passing the query string as an argument eg: php-cgi images.php source=IMG.jpg (that way you get all the error messages wh........

  • Linux Centos 6 Weird Kernel Panic


    Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tained: 3.2.51-3.el6.x86_64 #1 Call Trace: panic+0x8c/0x1a2 forget_original_parent+0x34d/0x360 exit_notify+0x12/0x140 do_exit+0x1d8/0x400 do_group_exit_+0x50/0xc0 sys_exit_group+0x12/0x20 system_call_fastpath+0x16/0x1b panic occurred, switching back to text console........

  • Linux Ubuntu Debian Howto Manually Update/Install Thunderbird


    wget http://download-location sudo tar xjvf thunderbird-24.2.0.tar.bz2 -C /opt ln -s /opt/thunderbird/thunderbird /usr/bin/thunderbird [sudo] password for one: ln: creating symbolic link `/usr/bin/thunderbird': File exists sudo rm /usr/bin/thunderbird ln -s /opt/thunderbird/thunderbird /usr/bin/thunderbird The above is how Idid it, if you don't do it properly you'll find that you are still using the old version (........

  • Linux Ubuntu Debian Howto Manually Update/Install Firefox


    wget http://download-location mv /usr/bin/firefox /usr/bin/firefox-old sudo tar xjvf firefox-26.0.tar.bz2 -C /opt ln -s /opt/firefox/firefox /usr/bin/firefox The above is how Idid it, if you don't do it properly you'll find that you are still using the old version (so verify in About that it is the new version). I've verified the above method works perfectly, it's great if you're using an older version of Linux and need to update the most........

  • [Hardware Error]: CPU:0 MC4_STATUS[-|CE|MiscV|-|AddrV|CECC]: 0x9c054c84011c011b [Hardware Error]: cache level: L3/GEN, tx: GEN, mem-tx: RD [Hardware Error]: Northbridge Error (node 0): L3 data cache ECC error.


    This server has been running for weeks without issue, it's currently only using 1 of 2 CPUs as it is running in the office as a test bed (mainly due to the handle 12 bay storage/great for testing HDDs). The errors below seem to mainly be from AMD CPUs, it's only happened a single time and in the days since Igot that error it hasn't occurrred. Interestingly enough /proc/cpuinfo still shows all 4 cores of the CPU (Opteron 2373 Quadcore HE) and the functionality doesn't seem........

  • Fatal error: Out of memory (allocated 6291456) (tried to allocate 7680 bytes)


    Fatal error: Out of memory (allocated 6291456) (tried to allocate 7680 bytes) This is usually caused by Wordpress, Drupal or other ridiculously inefficient CMS' out there, as a temporary fix you can increase PHP's memory limit but it's best to find the actual culprit, by disabling add-ons and other scripts etc...........

  • Asterisk iptables block bruteforce attacks howto with fail2ban


    yum -y install fail2ban vi /etc/fail2ban/jail.conf [asterisk-tcp] enabled = true filter = asterisk action = iptables-multiport[name=asterisk-tcp, port="5060,5061", protocol=tcp] sendmail-whois[name=Asterisk, dest=you@example.com, sender=fail2ban@example.com] logpath = /var/log/asterisk/messages maxret........

  • MySQL DELETE all but specific items or records howto


    DELETE FROM `wp_comments` WHERE NOT comment_author_email IN ('user@hotmail.com','another@hotmail.com') The above is an example of specific records you type out, but you could also base it on a subquery.........

  • Delete all comments from wordpress (in case of extreme SPAM)


    *Note this will delete all comments indiscriminately. DELETE FROM `wp_comments` To delete all but save specific comments based on "author e-mail use the following". Add more e-mails below in the same format if you have more. DELETE FROM `wp_comments` WHERE NOT comment_author_email IN ('user@hotmail.com','another@hotmail.com')........

  • Dell CS24-NV7 Howto Enable LAN/NICs and PXEBoot in the BIOS


    Dell CS24-NV7 Unusually the Virtualization was enabled when I got this server but all the NICs were diabled in the BIOS including PXE boot! Advanced -> Advanced Chipset Control PCI Slot 1 Option ROM: Enabled Onboard LAN1 Control: Enabled LAN1 Option ROM Scan: Enabled (you need it for PXE boot) Onboard LAN2 Control: Enabled LAN2 Option ROM Scan: Enabled *you will need to reboot and........

  • wget test without actually downloading howto


    user the "--spider"switch and you can see what it would do. wget -r --spider dontryrealtechtalk.com........

  • Vbulletin howto resend confirmation e-mail


    Visit that link http://yourforums.com/forum/register.php?do=requestemail Or in AdminCPit can be done.........

  • VBulletin Enhanced Captcha / RegSecure not showing/working images solution.


    This happened after a customer migrated their hosting and the issue was being unable to access PHP sessions. Warning: session_start(): open(/var/lib/php/session/sess_3e0oms763m6mrqekdnnmodlhs3, O_RDWR) failed: Permission denied (13) in /register.php(202) : eval()'d code on line 1 Solution:(use the correct ownership/permissions) chown apache.apache -R /var/lib/php........

  • kvm centos cannot compile error


    ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install gcc make ./configure ./configure: cannot locate gcc 3.x. please install it or specify with --qemu-cc yum -y install compat-gcc-* ./configure Error: Could not find alsa Make sure to have the alsa libs and headers installed. yum -y install alsa-lib-devel ./configure........

  • bash heredoc howto example


    template=$(cat ........

  • wget howto download all files from web page based on extension/type


    wget --accept "*.pdf" -r http://somewebsite/page........

  • Migrate Linux Mint OS from one drive to another


    mount -o bind /proc /sda2/proc mount -o bind /dev/ /sda2/dev mount -o bind /sys /sda2/sys chroot /sda2 mint / # mount -o bind /proc /sda2/proc mint / # mount -o bind /dev/ /sda2/dev mint / # mount -o bind /sys /sda2/sys mint / # chroot /sda2 mint / # cd ~ mint ~ # ls Desktop mint ~ # cd / mint / # ls bin Desktop dev-temp home&nb........

  • Openvz OOM Centos Issue Memory Config Settings Solution


    Linux box13. 2.6.32-042stab076.5 #1 SMP Mon Mar 18 20:41:34 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux even setting privvmpages to a specific setting DOES not affect "free -m" in containers. This is probably a kernel issue 23:36:29 up 159 days, 7:12, 4 users, load average: 0.42, 0.44, 0.33 [root@box13 ~]# free -m total&n........

  • sudo: sorry, you must have a tty to run sudo solution


    ./rsync.sh sudo: sorry, you must have a tty to run sudo rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7] Solution edit /etc/sudoers #Defaults requiretty........

  • Sipura / Linksys PAP/VOIP/SIP Adapter Issue Can't receiving incoming phone calls and you're behind a NAT router (99% of people)? solution


    Sipura / Linksys PAP/VOIP/SIP Adapter Issue Can't receiving incoming phone calls and you're behind a NAT router (99% of people)? 1. Login to the adapter. 2. Click on "Advanced" (location varies but usually somewhere on top) 2. Click on "SIP" 3. Scroll down to "NAT" (usually at the bottom). You'll find 2 columns with 4 rows of drop-down boxes (they'........

  • mdadm: Cannot open /dev/sda1: Device or resource busy


    This was caused by some weird dmraid setup which kind of takes control of drives even if they're blank/unused. 1. Check the table. dmsetup table ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172: 0 3905945600 linear 8:0 0 ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172p3: 0 37124096 linear 253:0 284547072 ddf1_44656c6c202020201000006010281f0b3f5195b77cf86172p2: 0 283496448 linear 253:0 1050624 ddf1_44656c6c2020202010........

  • tar how to include hidden files solution


    tar -czf yourfile.tar.gz . The . dot is the crucial part, normally many will use * and that will exclude hidden files by default which is very undesirable as many hidden files are important such as .htaccess and conf files in your home directory etc.. It seems the default behavior of tar should be the opposite but these are all very old tools.........

  • Dell SAS 6/ir Cards are just LSi 1068E cards


    02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) 03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) Basically these cards are a stripped-down version of Dell Perc 6/i only they (SAS 6/ir) support JBOD. The DellPerc 6/i are basically useless because it doesn't have JBOD support and requires software or BIOS commands to add or remove........

  • PHP Security - Enable Safe Mode to increase security


    Everyone should be running with safe_mode on in /etc/php.ini (on Centos) as it makes exploiting your system more difficult is PHPcan't execute anything on the system if a script is exploited. For example with Safe_Mode on the only executable files on the system are ones in the safe_mode_exec_dir = /safephp This is crucial, if you must execute anything from PHPthen you have to copy the binary and assign to the user that Apache runs your site under.&........

  • PHP5 Centos 6 displays part of code from PHP file for some scripts


    PHP5 Centos 6 displays part of code from PHP file for some scripts Solution edit /etc/php.ini change short_open_tag = Off to: short_open_tag = On Then restart Apache and it should be resolved (assuming the scripts failing used ) ........

  • Linux free space not reclaimed after deleting large log file solution


    This example involves an Aterisk message log of about 26GB, but with any server it usually does not get deleted until the server is stopped/restarted: asterisk 13729 root 6w REG 0,41 27277943090 59097971 (deleted) /var/log/asterisk/messages So if you've deleted a bunch of large logs, make sure you restart the server for them to regain your space. ........

  • CPanel suhosin install failed


    /scripts/phpextensionmgr install PHPSuHosin Updating md5sum list Fetching http://httpupdate.cpanel.net/cpanelsync/easy/targz.yaml (connected:0).......(request attempt 1/12)...Resolving httpupdate.cpanel.net...(resolve attempt 1/65)... Fetching http://httpupdate.cpanel.net/mirror_addr_list (connected:0).......(request attempt 1/3)......connecting to 74.50.120.123...@74.50.120.123......connected......receiving...100%......request success......Done........

  • Unixbench Testing


    The first is a dual CPU AMD Opteron 2373EE (4 cores x 2) and I think it did bad because it has some old 250GB SATAs which can only do about 65MB/s max sequential reads. I think it should have blown away the second (AMD X4 640 Quad Core). [root@fs12home unixbench-4.1.0-wht-2]# ./Run make all make[1]: Entering directory `/root/unixbench-4.1.0-wht-2' Checking distribution of files ./pgms exists ./src exists........

  • Sendmail Gmail.com blocking


    relay=alt4.gmail-smtp-in.l.google.com. [74.125.136.26], dsn=4.0.0, stat=Deferred: 421-4.7.0 [ 10] Our system has detected an unusual rate of This is strange because the mail server IP is not blacklisted anywhere and the IP itself has not been used for years and this server is clean and has only sent a few e-mails to gmail.com in its entire time. I wonder if this is a legacy block on a whole range of IPs as punishment for others in the block........

  • MySQL Allows blank user with no password to login


    I just realized I have some blank users which I deleted butI can still login to this dummy account without a password for some reason. mysql -u -p Welcome to the MySQL monitor. Commands end with ; or g. Your MySQL connection id is 5 Server version: 5.1.69 Source distribution Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation an........

  • Dell FS12-NV7 2U Server Information and Guide


    I've got one of these for testing projects from work at home and got more than I bargained for with the time I've spent on it due to the storage handing/Perc 6/i cards. My particular model came with the following: 2U Rack Mount Server with Rails 2xOpteron 2373 EE (Quad Core, there is a 6-core version that can be found at times) 16GB RAM 2 x 250GB Seagate SATA 2 x Dell Perc 6/i (horrible and a nightmare to work........

  • Dell Perc 6/i SATA benchmarks without battery


    The results are not bad, the Hitachi performs the same as it does in a SATA2 motherboard. However, the 2TB is much different, on a similar 2TB Toshiba I get about 198MB/s on a different motherboard vs the 2TB Hitachi which should produce similar results. This Dell Perc 6/i is on a PCI x8 riser card and is connected to a 12-port backplane. Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: N/A De........

  • Dell Perci 6/i Firmware Upgrade Guide Tutorial


    One thing to remember is that you need MegaCli to do the flashing. You also need the correct file,I tried at least 2 different Perc 6 firmwares from Dell that kept getting rejected as corrupt by MegaCli(they were really the wrong version). I have an external PCI-E Dell 6 Perc/I butI chose images from the 'Integrated" on motherboard version as it was allI could find. They are different, and below is my first time finding success.........

  • Dell Perc 6/i cannot downgrade


    I flashed an LSI Logic firmware to it and it broke the BIOS (cannot do Ctrl+R) for booting purposes but allows other functionality to work normally. I tried downgrading to a Dell firmware for Perc 6i but it won't work, not even with MegaCli wget http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN --2013-08-26 12:53:39-- http://downloads.dell.com/FOLDER00416606M/1/SAS-RAID_Firmware_W83M2_LN32_6.3.1-0003_A14.BIN Resolvi........

  • LSI MegaRAID Adventures, Guide and HowTo


    LSi Megaraid At first it was configured as a RAID 0, then I deleted the Virtual Disk Group. I thought both drives would be shown and detected in Linux as sda and sdb but it actually shows nothing. To make them work you have to hit Ctrl+R before the system boots (when prompted) and create a Virtual Disk Group. In my case I created each one as RAID 0 (with a single drive only) as I just wanted JBOD but there is no such option or default in these Dell Pe........

  • rpmforge Centos 6 x64 howto install


    rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt rpm -ivh http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm Retrieving http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm Preparing... ########################################### [100%] 1:rpmforge-release #############........

  • rkhunter update failed/dead?


    rkhunter --update Running updater... Mirrorfile /var/rkhunter/db/mirrors.dat rotated Using mirror http://rkhunter.sourceforge.net [DB] Mirror file : ERROR Fatal error: Problem while fetching file ........

  • pxe-32 tftp open timeout


    pxe-32 tftp open timeout The solution was to enable tftp in xinetd with "chkconfig tftp on". See the troubleshooting below: chkconfig --list NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off acpid 0:off&n........

  • CPanel How To Create/Edit Default Nameservers


    CPanel ->Basic cPanel &WHMSetup At the bottom you'll see them, set the nameservers you want to use and the corresponding A record if needed. Then all new domains will use those settings/nameservers. It's strange that there's no section for this specifically.........

  • Bash weird variable whitespace missing when echoing printing


    Bash weird variable whitespace missing var=`cat tlds.csv|grep .ca,` # echo "var=:$var:" :ar=:.ca,Canada Why is the v missing in the last line? It should be :var=:.ca,Canada instead of :ar=:.ca,Canada I noticed a problem with the file with doing a "cat -v" on it. Here's the issue, the file contains carat M ^M: .vg,British Virgin Island........

  • bash script howto use heredocand assign to a variable and write to a file


    zonetemplate=$(cat ........

  • iptables centos error getsockopt failed strangely: Invalid argument


    iptables -t nat -A PREROUTING -p udp -m multiport --dports 20,123,443 -j REDIRECT --to-port 53 getsockopt failed strangely: Invalid argument........

  • yum update error


    yum update error Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 229, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 145, in main (result, resultmsgs) = base.buildTransaction() &nbs........

  • charat in PHP convert non-English characters into code


    This is basically URL decoding to the decimal code but nothing in PHPworks how you'd expect it. Here are online tools to verify and check your work, it's important when querying databases with non-English characters: http://yehg.net/encoding/index.php# http://meyerweb.com/eric/tools/dencoder/ http://www.codetable.net/decimal/65398 Japanese: http://symbolcodes.tlt.psu.edu/bylanguage/japanesechartkatakana.html Charat code for PHP:........

  • bash how to read a single line or filenames with spaces solution


    This happens all the time, you are reading from a textfile which has spaces eg: datainfo 00 datainfo 11 If you do loop on it like this: for info in `cat $file`; do echo "info=$info" done It will treat datainfo and 00 as two separate lines: info=datainfo info=00 Obviously that's not what we want and there are many weird solutions in bash bu........

  • How to use the Linux mail command to attach a file


    The key here is to use the "uuencode" command but note that we specify the file name twice (this must be done at least on Centos or it won\'t work). The first file.zip is the actual file we want to send. The second file.zip i........

  • package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture solution


    package kernel-xen-2.6.18-274.7.1.el5.x86_64 is intended for a x86_64 architecture Linux etc 2.6.18-274.7.1.el5xen #1 SMP Thu Oct 20 17:06:34 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux As you can see above architecture and kernel is 64-bit but I had to force it to install using "--ignorearch" Solution #rpm --ignorearch -ivh kernel-xen-2.6.18-274.7.1.el5.x86_64.rpm Preparing...&nb........

  • Brand new WDD 500GB Blue 3.5 SATA Drive Dead After Shipping


    These drives seem to die very easily during shipping: sd 0:0:0:0: [sda] Unhandled error code sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] CDB: Read(10): 28 00 18 8b 65 e0 00 00 08 00 end_request: I/O error, dev sda, sector 411788768 sd 0:0:0:0: [sda] Unhandled error code sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] CDB: Read(10): 28 00 18 8b........

  • kernel: EDAC MC0: CE page 0x0, offset 0x0, grain 1073741824, syndrome 0x1a, row 2, channel 0, label "": i3200 CE


    kernel: EDAC MC0: CE page 0x0, offset 0x0, grain 1073741824, syndrome 0x1a, row 2, channel 0, label "": i3200 CE I believe this is a hardware issue, it's usually bad RAM, incompatible RAM or bad timing or even a motherboard/RAM controller.........

  • mkdir(): Too Many Links - The Solution and Problem in ext3 filesystems


    The error itself "mkdir(): Too Many Links" is not very useful, but I'll translate it into plain English. It means you've reached the filesystem's limit of how many directories can be created in a single directory. In this case for ext3 the limit is 32000 and it was exceeded. What's the solution? The simple solution is to move those directories into more subdirectories possibly sorting them by date, alphabet or numerically.........

  • stat=Deferred: 451-Non-existent domain mailserver.com


    Jul 11 15:20:58 tor sendmail[9617]: r6AKjOD07: to= mailserver.com was the hostname of the server, sendmail sends this by default and many mailservers will reject mail to a hostname that does not resolve or exist. The easiest way is just to change the hostname and make sure it does resolve to something. I read there is a way in sendmail.mc to manually set a hostname but I never got it working: vi /etc/mail/sendmail.mc define(`confDOMAIN........

  • rdesktop/Terminal Server Client Send Ctrl+Alt+Delete Howto


    The program itself catches it, just make sure it's actually focused on rdesktop and it sends Ctrl+Alt+Delete to the remote machine and not the local.........

  • Ubuntu Download Packages/Updates for EOL Unsupported Old Releases


    I installed Ubuntu 11.04 for testing purposes but I couldn't even download SSH server: sudo sed -i -e 's/us.archive.ubuntu.com/old-releases.ubuntu.com/g' /etc/apt/sources.list After running the above make sure you do a "apt-get update" Note with the above that Ihave the search string of "us.archive.ubuntu.com" change it to whatever is in your sources.list The above does not fix all repositories either, I haven't had a chance t........

  • MySQL HowTo Copy Duplicate a Table for backup purposes


    This is a great way to test and experiment without risking your current table, or to make a backup of your current table to avoid corruption or dataloss due to malicious activity eg. deletion etc.. There are two steps and two commands 1.)Copy Table Structure "cars_backup" is the new table and it will be a copy of the table called "cars"........

  • EXT4-fs error (device md20): ext4_add_entry: bad entry in directory #2552670:


    Jun 12 10:30:53 kernel: [724514.291670] EXT4-fs error (device md20): ext4_add_entry: bad entry in directory #2552670: rec_len % 4 != 0 - offset=216, inode=2553603, rec_len=94, name_len=84 Jun 12 10:30:53 kernel: [724514.292400] EXT4-fs error (device md20): ext4_add_entry: bad entry in directory #2552670: rec_len % 4 != 0 - offset=216, inode=2553603, rec_len=94, name_len=84 This happened when an unprivileged user was backing up a Windows filesystem, once they ha........

  • openoffice calc landscape printing problem


    openoffice calc landscape printing problem OpenOffice.org 3.2.1 OOO320m19 (Build:9505) ooo-build 3.2.1.4, Ubuntu package 1:3.2.1-7ubuntu1. It's not extending the printing and margins all the way to the edge even when setting the Page and print settings to Landscape Solution (incorrect margins set under Page): *Check the margins, my right margin was like 14cm!........

  • WD 20EARX Dead Again


    Another new drive bad from the start: Jun 2 15:14:18 one-desktop kernel: [15895.386779] ata2.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen Jun 2 15:14:18 one-desktop kernel: [15895.386782] ata2.00: irq_stat 0x08000000, interface fatal error Jun 2 15:14:18 one-desktop kernel: [15895.386784] ata2: SError: { UnrecovData HostInt 10B8B BadCRC } Jun 2 15:14:18 one-desktop kernel: [15895.386788] ata2.00: cmd 60/0........

  • Linux/ffmpeg How to remove audio from a video solution


    ffmpeg -vcodec copy -i 20130526_195809.mp4 -an 20130526_195809-noaudio.mp4 Withotu the -vcodec copy I got this error (so make sure you use the vcodec copy switch): Error while opening encoder for output stream #0.0 - maybe incorrect parameters such as bit_rate, rate, width or height ........

  • Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO


    I'm using ecryptfs and was suddenly unable to access or even ls my home directory (but every subfolder is accessible). It just hangs and throws this message in messages/dmesg: Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO I read somewhere that perhaps some file or folder is owned by root somehow, sure enough there are some and sudoing to root allows me to........

  • WD 20EARX 2TB Bad within days


    This is just trying to read 5GB off the drive with dd and the drive initially tested ok but shortly after I wondered why I was seeing 2MB/s read speeds. Notice the "current_pending_sector", anytime I've seen it at anything above 0 even with no other bad fields/attributes, it means the drive is bad. ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0 ata1.00: irq_stat 0x40000008 ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/00:00:........

  • Powersupply Issue, Motherboard AHCI issue?


    This is the most I can get when plugging in a hard drive hot and only on some power connectors. [71656.314271] ata5: exception Emask 0x50 SAct 0x0 SErr 0x90a02 action 0xe frozen [71656.314277] ata5: irq_stat 0x00400000, PHY RDY changed [71656.314285] ata5: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B } [71656.314294] ata5: hard resetting link [71660.360686] ata5: softreset failed (device not ready) [71660.360694] ata5: applying........

  • KVM Guest Network Not Working Can't Ping ETC Solution


    Once I set a new MAC address everything was fine and finally anything can be pinged etc.., I've had this happen with many clients in different datacenters on different hardware.........

  • Apache SSL Change Default SSL Vhost and Listening Port for SSL


    vi /etc/httpd/conf.d/ssl.conf Change the following from "Listen 443" to something like below Listen 2243 Then find the SSLVirtual Host Context and edit like below (to your new listening port) ## ## SSL Virtual Host Context ## ........

  • MySQL my.cnf Server How To Secure/Bind to Localhost and Prevent Outside Connections Solutions


    [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 bind-address=127.0.0.1 The key is "bind-address", set that to 127.0.0.1 and no one from outside the server can connect.........

  • mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142) - Solution


    mysqldump: Couldn't execute 'show create table `general_log`': SHOW command denied to user 'user'@'localhost' for table 'general_log' (1142) One of my clients almost found out the hard way, here is an unlikely situation that happened. 1.) Years ago the client had another VPS to which they backed up a BLOG nightly to an .sql file, what they forgot is that the file also contained all databases (they used the --all-databases option but forgot). So imagi........

  • Country List Names in HTML Select From


    This is useful for developing a lot of applications, I'm putting it here to keep it handy for myself and hopefully others: Choose CountryCanadaJapanUnited StatesUnited KingdomAfghanistan........

  • postfix/dovecot Sent emails missing sometimes


    On occassion and from a variety of networks and clients, Sent messages don't get saved. I'm wondering if these log messages could be why: May 3 14:16:39 mail.box postfix/smtpd[5195]: connect from 192.168.1.58 May 3 14:16:39 mail.box postfix/smtpd[5195]: SSL_accept error from 192.168.1.58: -1 May 3 14:16:39 mail.box postfix/smtpd[5195]: lost connection after CONNECT from 192.168.1.58 May 3 14:16:39 mail.box postfix/smtpd[5195]:........

  • sysctl how to apply values from /etc/sysctl.conf after changes


    If you make changes to /etc/sysctl.conf (which are permanent and not lost during reboot) but want them to apply with rebooting just use the following command: sysctl -p After that your changes will be enabled.........

  • eth0 changed to eth1 or eth2 and the solution to fix it


    If you move your hard drive(s) around to other computers/servers, you'll find that your eth0 keeps getting higher, the first time it will become eth1 and then eth2 etc and even higher if your server has dual or quad NICs. The reason is that udevd basically assigns eth0 tot he first NIC it finds and remembers it, if it encounters a NIC with a differentMAC, it assigns it one higher (eg. eth1). See the example below, I have eth2 now so how doI fix it?........

  • SSH Can't Login/Hang


    Client Log OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.1.253 [192.168.1.253] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_d........

  • Kernel panic - not syncing: Attempted to kill init! Pid: 1,comm: init Tained: G I------------- 2.6.32-358.el6.x86_64 #1 Call Trace: [] ? panic+0xa0/0x16f [] ? do_exit+0x862/0x870 [] ? fput+0x25/0


    Kernel panic - not syncing: Attempted to kill init! Pid: 1,comm: init Tained: G I------------- 2.6.32-358.el6.x86_64 #1 Call Trace: [] ? panic+0xa0/0x16f [] ? do_exit+0x862/0x870 [] ? fput+0x25/0x30 [] ? do_group_exit+0x58/0xd0 [] ? sys_exit_........

  • bash for loop script for a specified number of times example


    for entity in {1..20}; do echo "entity=entity" done The above will loop 20 times, you could also do {2..50} etc... for entity in {0..10..5}; do echo "entity=entity" done The above will loop 10 times but will start from 0 and increment by 5 each time.........

  • Directadmin error/** Found 7 pre-existing rpmdb problem(s), 'yum check' output follows: e2fsprogs-devel-1.41.12-3.el6.i686 has missing requires of e2fsprogs-libs = ('0', '1.41.12', '3.el6') e2fsprogs-devel-1.41.12-3.el6.i686 has missing requires of l


    Solution To The Following: yum -y install zlib-devel yum -y install e2fsprogs* *** Cannot find /usr/include/et/com_err.h. (yum install libcom_err-devel) *** Installation didn't pass, halting install. Once requirements are met, run the following to continue the install: cd /usr/local/directadmin/scripts ./install.sh Common pre-install commands: http://help.directadmin.com/it........

  • Samsung Galaxy Note I717M Canadian Version, Root and Unlock


    I chose this because I heard a lot of stories about scams and that many providers I contacted said they can't unlock the Canadian I717s (one said "my Bell server" is down). This method worked perfectly on my Bell I717M and should work for all I717 in Canada, I was able to insert a foreign SIMcard. This will work abroad too but remember entering CWM mode is different for I717's in other countries (at least theUS). Step 1 - Root + CWM........

  • Bad Hard Drive Slows Down Computer


    Here's a proven example of what a bad hard drive can do, it was technically functioning OKin a RAID array but the system became extremely low and the load become high and IOWAIT was even higher and I always thought it was a bad application. The truth is that this failing 1TBHitachi has slowly gotten worse and caused huge slowdowns, (eg. 100% load on Thunderbird waiting for e-mails to load etc..). After swapping it out, tabs change instantly, emails are not lagged, and........

  • Strange SATA error code when turning on HDD/Hard drive - [1433128.139339] sd 5:0:1:0: [sde] Unhandled error code [1433128.139343] sd 5:0:1:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1433128.139348] sd 5:0:1:0: [sde] CDB: Read(10):


    [1433128.139339] sd 5:0:1:0: [sde] Unhandled error code [1433128.139343] sd 5:0:1:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1433128.139348] sd 5:0:1:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [1433128.139360] end_request: I/O error, dev sde, sector 0 [1433128.139410] sd 5:0:1:0: [sde] Unhandled error code [1433128.139414] sd 5:0:1:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1433128.139420] sd 5:0:1........

  • How to log all PHP based E-mails for abuse


    Step #1 - Create Wrapper Script vi /usr/local/bin/phpsendmail #!/usr/bin/php ........

  • Samba Solution To Error "[2013/02/22 19:06:37.373564, 0] param/loadparm.c:8004(lp_do_parameter) Global parameter guest account found in service section!"


    [2013/02/22 19:06:37.373564, 0] param/loadparm.c:8004(lp_do_parameter) Global parameter guest account found in service section! This is annoying but the solution is simple: The line "guest account = " is in the section for a share (in /etc/samba/smb.conf), but it should be under globals. Move it under [global] and then everything should be fine.........

  • Centos 6 RTL8111/8168B r8169 link up and down error solution/fix


    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) For whatever reason it seems the r8169 driver that ships and has shipped with most Linux distros for years is still flawed and does not work properly on these cards, causing 100mbit connectivity when it should be 1gbit and even worse, causing random network dropouts. The r8169 driver in Linux kernels is simply not meant to be used on th........

  • OpenVZ - how to manually restore a VPS from another host or backup


    There are 3 pieces that are required to restore and make it work (of course consider if any kernel modules need to re-enabled and if you need to change the IPs): Copy the vz/private/VEID directory to /vz/private Copy the /etc/vz/conf/VEID.conf to /etc/vz/conf/ mkdir /vz/root/VEID After that you should be able to see the VE in vzlist -a You should then be able to start it normally.........

  • Samsung Galaxy Note Ubuntu Linux USB Connection Error


    This pops up when connecting the phone and it doesn't seem to charge. The phone keeps showing a status message every few seconds "Connected as a media device". It's ridiculous why this phone doesn't just default as a simple USB Mass storage device. Here's what I see in /var/log/messages: Jan 30 18:51:27 QuadCoreAM2 kernel: [18038228.144046] usb 1-3: new high speed USB device using ehci_hcd and address 24 Jan 30 18:51:28 QuadCoreAM2 ke........

  • badblocks in Linux to check/verify if a hard drive/HDD is good or bad


    I like badblocks and don't know a better more reliable way of checking the drive. If there are no errors from badblocks and dmesg doesn't produce any SATA related errors, the drive should be good (for now at least). I also prefer to do read and write mode, yes it takes ages but it is really the best way of doing it. This gives me the most confidence in knowing that a drive, especially a new one is at least OK at the moment. To test in read only mode........

  • OpenOffice Writer Replacing/Reformatting Dates in Tables - Howto Disable


    Tools -> Options -> OpenOffice Writer -> Table Uncheck "Number Recognition" This will permanently disable it but won't undo the damage it has already done. I spent a long-time fighting with this horrible feature which should be disabled by default.........

  • FBDIMM /PC5300F RAM chips can work properly be with mixed timing/speeds


    I've read some people/sources say "the timing must match or it won't work". This is not true at least for the Supermicro boards I've tested this on. Some examples: PC2-5300F-555-12 PC2-5300F-555-11 etc.. Notice the "12" and "11" Also the ones that have a "PC2-5300F-555-11-B0" or "PC2-5300-555-11-D0" are also fine. What happens is what one would expect, the........

  • How-to Change Thunderbird Profile


    thunderbird -ProfileManager Type that from the command prompt and you can choose, that's the only way you can do it whichI find a bit silly.........

  • How to install GRUB to the MBR of a disk image.


    cat | grub --device-map=/dev/null Now pay close to the attention of the beginning. Type: "device (hd0) VPS.img" this is telling what hd0 will be to GRUB and we're telling it the disk image file "VPS.img" in the current directory is hd0, you can specify alternate paths and image names of course. GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-li........

  • kvm cannot boot xen guest using lvm


    This booting error is because the Xen PV guest image uses the Xen kernel, this is not compatible with anything but a host running a Xen kernel. I did a kpartx -av virtual.img and then it created some partitions that showed up in fdisk. I mounted it and did a chroot into it and removed the xen kernel and installed a normal kernel but Xen still shows the same kernel in Grub (only the Xen one). This is strange but it seems like this Xen PV guest has some sort of hidden or........

  • "** You must add a global ddns-update-style statement to /etc/dhcpd.conf." DHCPD Solution


    No one needs this feature for the most part, so here's what I added to /etc/dhcpd.conf to fix it: ddns-update-style none;........

  • Startech SV1107IPEXT KVM/IP Review


    Let's keep this simple, it's horrible, not only is the picture quality horrible (it's not a big deal) but the keyboard input is an issue. You have to type slowly, lightly and carefully otherwise 1-keystroke could end up being dozens of keystrokes. It's also a confusing unit for many datacenter techs, I've seen these units hooked up wrong and the instructions themselves aren't clear. I had to resort to shipping one to my office and take my phone pictures of the setup for th........

  • Lantronix KVM/IP Keyboard/Mouse not working in BIOS before booting the OS


    I've run into two issues with Lantronix based KVMs on various servers and here's how I solved them (with that said I like these units as they are Java based and OS independent and work very well, unike some other models like Startech). 1.) If you are connected by USB only and you're sure USB support from the BIOS is enabled, you just need to click the following in Lantronix Interfaces -> Keyboard/Mouse Check "Force USB Full Speed Mode", this fixed the issu........

  • Delete arp entry from Linux Howto


    arp -a syst (192.168.1.122) at 21:96:43:3a:62:a2 [ether] on eth0 arp -d 192.168.1.122 If you get an error do: arp -d 192.168.1.122 -i eth0 Sometimes the arp cache just won't clear either, some say it should automatically but there are cases where the above doesn't work. I believe it may be that some network applications are keeping the entry alive but this is just a guess.........

  • Login and download all files script


    This is very handy if you're too busy and don't have time to download whatever files you need. The -D specifies the domains allowed, this is because I specified -H which means foreign hosts are allowed, if you don't restrict them you'll end up going to the whole internet via ads and other links just like a search Engine would follow. -l 0 specifies to go deep, to as many levels as possible/as exist. -e robots=off is important because robots.txt often says you can't vie........

  • Setup PXE Boot using Centos and dhcpd, tftp and syslinux


    This is something I often setup for clients because it's very helpful for people in datacenters, this allows custom OS installs on demand, you can customize it more by using kickstart etc.. but here's a base I use before customizing more: This little script below will install everything you need to get booting by PXE Linux. It also assumes you set a local IP (be sure not to overwrite your existing IP) on eth0:0 (note the :0) as 192.168.1.10 and it........

  • Howto Copy/Backup/Restore All Firefox Settings/Preferences/Addons/Bookmarks to another computer/desktop


    I've used rsync again for this because I found it very simple, I've only excluded the Cache directory since it's not necessary and could be several GB in size. rsync -Phaz --exclude=Cache/* user@remotehost.com:/home/user/.mozilla/firefox/profile.default/* /home/user/.mozilla/firefox/ec1n9opl.default/ This is a great way once again to get going how you were on the old/remote computer fairly quickly. It even restores all of your history in........

  • Thunderbird How-To Copy/Backup/Restore Accounts and Settings to Another Computer


    The best way is to use rsync, I've set it up so it doesn't copy unnecessary files, or at least ones I'm sure aren't needed. Here is the rsync command Iused (adapt to your specific Thunderbird profile location): rsync -hazv user@remotehost.com:/home/user/.thunderbird/sbrer.default/* /home/user/.thunderbird/4nyb0.default/ --exclude=global* --exclude=Cache --exclude=ImapMail --exclude=Mail This is a great way to get your e-mail accounts going on a new c........

  • Disable SELinux How To Tutorial Solution


    Here is a quick script that works on most Centos versions to disable the virus/SELinux from blocking basic functionality. The first echo 0 statement disables SELinux instantly but it will still be enabled on reboot. The second line disables it permanently. #!/bin/bash #disable SELinux Immediately echo 0 > /selinux/enforce #disable SELinux Permanently sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config........

  • KVM/QEMU Base/Template Images and the power they provide


    qemu-img create -b centos.5-8.x86.20120308.qcow2 -f qcow2 ../kvmguests/25000-centos5.8x86.qcow2 Formatting '../kvmguests/25000-centos5.8x86.qcow2', fmt=qcow2, backing_file=centos.5-8.x86.20120308.qcow2, size=10485760 kB -b the source/base image -f format is qcow2 and the location of the destination image What is so special about this? It's even quicker than creating a template with OpenVZ but this is an actual OS. It saves time a........

  • mdadm: /dev/sdb1 not large enough to join array solution


    mdadm --manage /dev/md1 --add /dev/sdb1 mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. mdadm: /dev/sdb1 not large enough to join array md1's first primary member /dev/sda3 has 57394 cylinders while the /dev/sdb1 has 57393 (1 less cylinder) which is why it won't work. fdisk -l /dev/sda3 Disk /dev/sda3: 47........

  • CPanel error: "Your SSL certificate failed to install on your site."


    This error in my experience is user error although CPanel doesn't help, this message doesn't give you much to go on. Let's talk more about the process of setting up SSL with CPanel. Your site must have a dedicated/non-shared IP to even have the option of creating an SSL Certificate. You must create a Private Key (do not delete this private key!) You must create a CSR (Certificate Signing Request) Use CSR to create cert........

  • Centos 5 and OpenVZ won't boot after kernel install


    For whatever reason the current OpenVZ yum repo file enables the RHEL6 version of OpenVZ, why is this bad? Because if you're running Centos 5 it still defaults to using the kernel from RHEL6 which won't work on RHEL5/Centos 5. Ionly realized this after wondering why I couldn't boot into OpenVZ that it was using one meant for RHEL6. To fix the problem you have to edit /etc/yum.repos.d/openvz.repo and disable the "[openvz-kernel-rhel6]" section by changing........

  • ioctl: Operation not permitted can't delete tunnel


    When trying to delete a tunnel ip tunnel del tunl0 I get this message: ioctl: Operation not permitted........

  • ip_conntrack: table full, dropping packet. solution for Linux RHEL/Centos/Debian


    ip_conntrack: table full, dropping packet. A lot of clients I've seen have this issue, it really seems the default level is way too small. Once this connection tracking table becomes full then packets get dropped which is obviously a bad thing. One thing to be mindful of though is that 350 bytes of memory are used per entry so there is some justification for not keeping it too high. However, if you have multiple servers running or high traffic daemons........

  • Linux/Centos how to block SSH bruteforce/dictionary attacks automatically with denyhosts


    A lot of people become nervous (and understandably so) when checking their auth or security logs, in Centos /var/log/secure and see dozens, hundreds of even thousands of attempted logins to various services, especially SSH. Of course you could manually block these people/IPs but no one has time to read the logs like that, what if some program or script could do it for you? This is what denyhosts does for you, it checks the logs and based on a certain number of failed SSH attem........

  • Samsung Galaxy Note Upgrade to ICS 4.0 microSDHC card not detected/dataloss after upgrading - possible solutions


    I backed up everything in the /mnt/sd_card directory thinking that some dataloss could occur for some reason but purposely left my microSDHC unbacked up thinking that "it won't touch that since it's external" and Samsung's and other manufacturers website even say this (that it won't be affected and not to worry etc). Apparently I was wrong, my microSD was "undetected" and asked to be formatted after the upgrade (there goes 3-months worth of family photos). No........

  • Centos how to upgrade from PHP 5.2 to 5.3 without downtime


    This may sound silly but there will be conflicts/issues with the default Centos repository so you have to use a third party like remi (I prefer not to do this but it's the only option unless you migrate your sites/data to another server or can stand some downtime-not an option IMHOon a production server). You may need to upgrade to PHP5.3 to run Joomla or many other reasons. Your host needs to use PHP 5.2.4 or higher to run this version of Jo........

  • How to view an EFI GPT partition in Linux


    Disk /dev/sda: 320.0 GB, 320072933376 bytes 256 heads, 63 sectors/track, 38761 cylinders Units = cylinders of 16128 * 512 = 8257536 bytes Device Boot Start End Blocks Id System /dev/sda1 1 38........

  • MySQL Authentication fails after Upgrade to Version 5.5


    ERROR 1045 (28000): Access denied for user 'contentmanager'@'localhost' (using password: YES) For fun I thought I'd reset the password: GRANT ALL ON thecontent.* TO contentmanager IDENTIFIED by 'dfdfsdfdsfsdfsd'; ERROR 1470 (HY000): String 'contentmanager' is too long for user name (should be no longer than 16) This is ridiculous that this new version has some bizarre 16 character username limit and not only that but i........

  • mdadm how to add a device to an array after a failure


    This array is a RAID 1 and in this case 1 of the 2 drives failed (a WD drive and I've found them to be the weakest and most unreliable of any brand and are easily damaged/DOA when shipping them). mdadm --manage /dev/md0 --add /dev/sdb1 The above assumes the array you want to add to is /dev/md0 and the device we are adding is /dev/sdb1 *One thing to remember is to make sure the partition you are adding is the correct size for the array. You can also g........

  • setquota: Mountpoint (or device) / not found. setquota: Not all specified mountpoints are using quota. with openvz solution


    Directadmin Error when changing user settings/saving Details Error with system Quotas setquota: Mountpoint (or device) / not found. setquota: Not all specified mountpoints are using quota. Debug Guide You have to disable and enable the quota's using vzquota on and off. After that it will work.........

  • Debian UUID not working


    Neither the blkid or the UUID internal to mdadm work to automount for some reason in Debian partprobe doesn't work but was a good suggestion from: http://pato.dudits.net/2008/11/03/special-device-uuidxxxxxxxxxxxxxxxx-does-not-exist-especially-with-lvm mount: special device /dev/disk/by-uuid/431b9b96-29e8f298-e89bd504-7065bddd does not exist mdadm -D /dev/md_d12 mdadm: metadata format 00.90 unknown, ignored. /dev/md_d12: &nb........

  • Linux Quick and Simple Animated Banner Creation using gifsicle


    This is just how I like things, quick and simple through CLI (command line) using gifsicle for free. gifsicle --colors 256 --delay=200 --loop banner.gif banner-page2.gif > banner.gif banner.gif = the first page of the banner banner-page2.gif = the second page --delay=200 ms to switch between the two --loop=it goes back and forth between the two pages forever banner.gif=the resulting animated gif. There are many other opti........

  • Windows Secret Hidden Temp Directory to free out of disk space issues


    Replace "Administrator" with your username. C:Documents and SettingsAdministratorLocal SettingsTemp Ihave often found several gigabytes of temporary files in there! Just be warned that they may not all be deletable if the files are being used by open programs (so close everything you can). This helped me in a pinch many times when for apparently no reason gigs of disk space are being used for an unknown reason.........

  • Centos Complete RPM/ISO Archive is at http://vault.centos.org


    This is so handy, especially if you need things like old kernels etc..., this is the main and practically only place you'll ever find what you need. http://vault.centos.org........

  • Error: detected vswap CT config but kernel does not support vswap This means either old kernel or bad config (physpages NOT set to 0:unlimited) Solution for OpenVZ


    Error: detected vswap CT config but kernel does not support vswap This means either old kernel or bad config (physpages NOT set to 0:unlimited) Solution vzctl set $veid --physpages 0:unlimited --save........

  • Error code: sec_error_unknown_issuer Solution Valid SSL Certificate Throwing Error in Firefox


    So you've just purchased your SSL cert, renewed it and installed it or maybe you've had it installed and working fine all the time with all other browsers but you've upgraded to a recent version of Firefox and suddenly get the warning "Error code: sec_error_unknown_issuer" error. This is terrible since if you bought an SSL cert, you are most likely using it for trust purposes for your business and obviously that message will scare away most potential customers.........

  • iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) - OpenVZ Container Problem iptables module problem solution


    iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) This solution applies to all other iptables modules/problems for OpenVZ, you'll just need to add them to both lists/lines below if you have modules other than what I have below. The modules need to be enabled in both iptables and the OpenVZ hostnode itself and then the containers which need it must be restarted. How To Enable IPTables Modules in OpenVZ........

  • HowTo Migrate and Import iPhone/Outlook Contacts into Android without using GMail using .vcf files


    I searched for days after getting my Galaxy Note and couldn't find a way to do this (at least not without buying programs for either Android/Windows). All I read was ways to sync and import the contacts to GMail but I don't want to use GMail for privacy reasons. GMail/Google steal all of your personal information and use it for whatever purposes they want to and may sell or release it to who knows where (I don't care what their policy says but this stuff happens), just like the default........

  • failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)


    [ 12.460014] ata1: SRST failed (errno=-16) [ 17.626677] ata1: link is slow to respond, please be patient (ready=0) [ 22.480011] ata1: SRST failed (errno=-16) [ 27.646681] ata1: link is slow to respond, please be patient (ready=0) [ 38.106817] ata1.01: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 48.266676] ata1: link is slow to respond, please be patient (ready=0)........

  • pcnet32: eth0: transmit timed out, status 97fb, resetting - NIC card problem solution


    I've encountered this problem before and I believe it may affect other drivers (I could test but I don't have time). This was happening on my custom Linux system with the pcnet32 driver. pcnet32: eth0: transmit timed out, status 97fb, resetting (and some other kernel module tracing in dmesg) Basically it means the card is connected (it shows connected in full duplex etc.. and recognized if the cable is disconnected too) but no packets can be sent or received........

  • Could not display "trash:///". Error: DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout


    Could not display "trash:///". Error: DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Please select another viewer and try again. This happened in Ubuntu but only because I was trying to delete millions of files at once and i........

  • SSH error slow login debug1: An invalid name was supplied Cannot determine realm for numeric host address - Solution


    debug1: An invalid name was supplied Cannot determine realm for numeric host address debug1: Local version string SSH-2.0-OpenSSH_4.3p2 Debian-9etch3 debug1: An invalid name was supplied Cannot determine realm for numeric host address debug1: An invalid name was supplied A parameter was malformed Validation error Solution, disable auth from the ssh client (this is a client side error)........

  • How To Install CPanel


    wget -N http://httpupdate.cpanel.net/latest;sh latest That one command above will do it all (and it takes a long time to install/compile). After that you can access CPanel with your root login information by visiting https://yourdomain-or-ip.com:2087 I personally don't like CPanel (bloated, full of bugs, no shared SSL, difficult to use etc..)but I admit it's easier to install than........

  • LOG: MAIN PANIC failed to expand condition "${if eq {$authenticated_id}{}{0}{${if eq {$sender_address}{$local_part@$domain}{0}{${if match{$received_protocol}{N^e?smtps?a$N}{${perl{checkbx_autowhitelist}{$authenticated_id}}}{${if eq{$received_prot


    I experienced this with CPanel's Exim after an auto-update (a Google of this error produces lots of complaints with few clear solutions). In this case I'll put the solution at the top. Run /scripts/buildeximconf to rebuild the Exim config and it should be fine after that. mail -vs "from test" user@dest.com < .bash_history LOG: MAIN cwd=/root 4 args: send-mail -i -v user@dest.com LOG: MAIN &........

  • The Importance of a High Quality Power Supply/Power Supplies To Prevent Overheating/System Crash/Hardware Damage


    For years I've always built cheap systems believing that there is little difference in more expensive components when it comes to reliability and quality, I generally believe this still except for Power Supplies. I've always bought cheap cases with nice sounding 350-550W stock/cheap/crap power supplies and haven't had any issues for the most part until recently. One such case is an NGEAR case with a 550W Optimax power supply, I always read that these supplies don't produce the........

  • Asus VE247H 23.7" Inch LCD/LED Backlit Monitor Dead/Stuck Pixel Policy Complaint


    I've thought for awhile that Asus has been banking on its years old reputation for quality amongst gamers and enthusiasts and I think I'm right. My Asus VE247H Monitor with a supposed 2MS refresh rate has 1 red/stuck/dead pixel but fortunately it can only be seen on a non-true black picture or against a blue screen. I have several Asus products and find they're all of fairly poor quality. First of all their motherboards have given me the most issues of any brand, they te........

  • Linux Ubuntu Nvidia GT430 Lockups/Errors/Freezes NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context


    I'm running Ubuntu 10.10 with Asus NVIDIA GT430 2.6.35-32-generic-pae #65-Ubuntu SMP Tue Jan 24 14:06:16 UTC 2012 i686 GNU/Linux Nvidia binary driver: 260.19.06 The screen sometimes completely freezes and locks up or everything starts going very slow: [1903398.100007] NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context [1903402.373210] NVRM: Xid (0001:00): 53, CMDre 00000000 00000080 00000000 00000005 00........

  • KVM QEMU and Xen how to mount disk images off-line and access data


    fdisk -lu VPS.img last_lba(): I don't know how to handle files with mode 81ed You must set cylinders. You can do this from the extra functions menu. Disk VPS.img: 0 MB, 0 bytes 255 heads, 63 sectors/track, 0 cylinders, total 0 sectors Units = sectors of 1 * 512 = 512 bytes Device Boot Start End ........

  • Skype Linux/Ubuntu Sound Echo/Distortion Poor Quality Problem Fix Solution


    This was very annoying but has a simple fix, I had an echo and the voice quality was absolutely horrible (it sounded like tin cans under water) if that helps describe it. It was extremely distorted. The simple Skype sound quality solution Go to "Options" -> "Sound Devices" Disable the "Allow Skype to automatically set my mixer levels" After doing this the sound qua........

  • Ubuntu 10.04 Flash Videos have tearing/lines Solution


    This is what I call a ridiculous bug in compiz that causes it. The solution/To fix it just install "compizconfig-settings-manager" Open it up and Navigate to General Options -> Display Settings Set the "Refresh Rate" to the current refresh rate of your monitor. For ATI cards with slow window dragging/response supposedly disabling "Sync to VBlank" fixes that but otherwise leave it as is.........

  • File /etc/vz/conf/ve-vps.basic.conf-sample not found: No such file or directory - Openvz Error solution


    Stuff like this always happens/breaks after a vzctl update, whether it's new parameters being added or required etc.. File /etc/vz/conf/ve-vps.basic.conf-sample not found: No such file or directory Fix the value of CONFIGFILE in /etc/vz/vz.conf Creation of container private area failed Warning: distribution not specified in CT config, using defaults from /etc/vz/dists/default WARNING: /etc/vz/conf/4400.conf not found: No such file or directory........

  • Ubuntu 10 Nvidia Drivers Not Updated After Kernel Update Solution/How-To Manually Rebuild nvidia kernel modules for Ubuntu


    I dread updating the kernel and rebooting to find the Ubuntu graphics aren't working and you have to manually intervene. This is usually because Ubuntu for whatever reason didn't update the drivers you need (eg. the manually compiled Nvidia Kernel driver that MUST be recompiled for each and every kernel update unfortunately). The most common reason may be that "linux-source" hasn't been installed automatically on my system. I tried to manually reinstall the........

  • mdadm/Debian problem


    This is one in a series of weird things whichIthought was motherboard related (I RMA'd the motherboard), the RAM tests fine with memtest86 and I used badblocks on both RAID 1 members with no errors and smartctl is happy with them. Basically the array crashes the kernel a lot and has issues when writing. [112322.723465] md0: rw=0, want=14958668696, limit=1887460480 [112322.731077] attempt to access beyond end of device [112322.731087] md........

  • iptables block torrents/torrenting


    This is a very basic method and won't work in all cases but will reduce the chance of torrenting/abuse by your server users. iptables -A INPUT -p tcp --destination-port 6881:6999 -j REJECT iptables -A OUTPUT -p tcp --source-port 6881:6999 -j REJECT........

  • vmware Failed to initialize monitor device 95% power on


    Failed to initialize monitor device 95% power on Solution /etc/init.d/vmware-core start........

  • OpenVPN don't use bridgestart.sh or bridge at all use iptables


    I used the suggested script to bridge from OpenVPN and it took my client's server off-line! Don't ever use their "sample" scripts if you don't have another way of accessing the server than SSH. I actually found it easier to use iptables to tell it to route IPs based on a certain subnet to route through eth0: iptables -t nat -A POSTROUTING -s 192.168.200.0/24 -o eth0 -j MASQUERADE Replace "192.168.200.0/24" with your subnet of cour........

  • postfix lopback error solution


    This is the mail system at host mail.postmail.com. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. &........

  • How To Burn ISO Image using cdrtools/dvdrtools for Linux/Unix Ubuntu/Debian/RHEL/Centos etc..


    It really is as simple as: cdrecord -v dev=/dev/sr0 pathtoyourisoimage.iso -v is for verbose, I prefer it but if you don't you won't see as much output like below (I like to know the details and exactly what's happening) dev=/dev/sr0 specifies the device name of your burner (they say not to use it and to specify some weird annoying device string but using the raw /dev has always worked for me and is how it should have been implemented from the start IMHO)........

  • Install Android SDK and start testing on Debian/Ubuntu: How To Guide/Tutorial


    Visit http://linux.softpedia.com/get/Programming/Interpreters/Android-32340.shtml Basically copy and paste all of that below and you'll have installed and started the Android SDK before you know it. wget http://dl.google.com/android/android-sdk_r12-linux_x86.tgz sudo apt-get install openjdk-6-jre openjdk-6-lib openjdk-6-jre-headless tar -xvf android-sdk_r12-linux_x86.tgz cd android-sdk-linux_x86/tools ./android........

  • gocr - free Linux OCR (Optical Character Recognition) conversion tool


    gocr works great and it's simple, just invoke it like so: gocr filename.png The output will be printed to the screen. My only complaint/concern is that even with standard terminal output (not scanned) from a printscreen, gocr does make mistakes by inserting extra spaces where they don't belong, mistaking letters for numbers etc.. but it's definitely enough to be readable and figure out what you're looking at. I haven't tested yet with scanned input........

  • Linux Kernel Panic Messages - Symptoms of bad RAM module/stick


    These were caused by a bad stick of Corsair RAM [] free_hot_cold_page+0xfc/0x150 [] __pagevec_free+0x14/0x1a [] release_pages+0x127/0x12f [] __pagevec_release+0x15/0x1d [] __invalid_mapping_pages+0x120/0x156 [........

  • Hitachi HDD/Drive RMA Process Experience


    The first Hitachi Deskstar 2TB 5K3000 drive I bought arrived DOA for whatever reason (not recognized by the BIOS or OS). Perhaps it was shipping since I bought only 1 hard drive. When I bought 4 through another Vendor, all 4 checked out fine. I was worried about the RMA process because a lot of people have complained about Hitachi taking weeks to send out their hard drive and almost implied the warranty is useless. I'm happy to report that my experience was great a........

  • vino crashed/stopped working, restart vino manually without rebooting


    The normal solution would be as follows: export DISPLAY=:0.0 /usr/lib/vino/vino-server & But what happens if that doesn't work? I haven't been able to find much documentation about how to find the list of displays and how their numbering works in Xorg. Sometimes you'll get this error when trying to restart vino: Cannot open display: For some reason my display is not on 0.0........

  • vi disable color syntax highlighting/can't read syntax highlighting


    Within vi if you can't exit /etc/vim/vimrc you can type :syntax off And to turn it back on: :syntax on Many of us have a dark/black background in our terminal/shell making the default syntax unreadable, the solution is to either turn off syntax highlighting with :syntax off or to enable a special option in /etc/vim/vimrc Edit /etc/vim/vimrc The "syntax on" enables the highligh........

  • wget download all files on page/directory automatically recursively


    Have you ever found a website/page that has several or perhaps dozens, hundreds or thousands of files that you need downloaded but don't have the time to manually do it? wget's recursive function called with -r does that, but also with some quirks to be warned about. If you're doing it from a standard web based directory structure, you will notice there is still a link to .. and wget will follow that. Eg. let's say you have files in http://serverip/documen........

  • samba/smbd connection to share problems and solutions


    I'll start by showing some problems in the logs: [2011/08/07 16:22:06, 0] param/loadparm.c:8569(process_usershare_file) process_usershare_file: stat of /var/lib/samba/usershares/movie failed. Permission denied [2011/08/07 16:22:06, 1] smbd/service.c:676(make_connection_snum) create_connection_server_info failed: NT_STATUS_ACCESS_DENIED That means you don't have permission to access the fi........

  • screen Cannot open your terminal '/dev/pts/2' - please check.


    The solution to this screen issue is simple. This happened to me in Centos 5 as a user, but I also su'd to it and I don't have any password for it. I've read some people say this is more common when su'ing. The solution is simple though, just give others rw access to the corresponding pts whether it's 0,1,2 etc..: As root do chmod o+rw /dev/pts/2 ........

  • ifup eth0 SIOCSIFFLAGS: Cannot allocate memory Failed to bring up eth0 Centos Network won't work after kernel update and reboot


    ifup eth0 SIOCSIFFLAGS: Cannot allocate memory Failed to bring up eth0 This is on a Centos 5.5 machine with OpenVZ kernel 2.6.18-238.12.1.el5.028stab091.1PAE, I updated 3 systems with the same hardware to the same kernel and for some reason the network didn't come back. This only happened once the first time I booted into the new kernel and hasn't happened again but this is a serious issue for those running systems from remote locations such as a datacente........

  • Openvz Container IP not working suddenly Solution


    This may not apply to everyone but here is what happened to me. One day my IP connectivity for one container went dead, I could ping the hostnode from it and the hostnode could ping it but there was no external routing. I restarted the network service but it didn't help. I checked the routing table inside the VPS and the host and everything looked normal. Iadded another different IPon the same subnet to the container and it worked. Right away I st........

  • How to view UDP and other protocol connections?


    netstat is weak and can't show udp connections and most other protocols, use "ss" which is what netstat should have been: The "-u" switch stands for udp, here's a list of other options: Usage: ss [ OPTIONS ] ss [ OPTIONS ] [ FILTER ] -h, --help this message -V, --version output ver........

  • Linux Out of Memory OOM Object Killer Solution "Out of memory: kill process 1955 (sshd) score 81 or a child"


    I had a system running a 128MB live CD image with 2.8 gigs of available RAM and the OOM kernel killer went crazy when using dd for more than 8 minutes and kept killing everything. I've read that this is due to a low-memory issue and paging in the kernel and 32-bit systems with lots of RAM. I even enabled swapspace on my LiveCD and the issue happened 25 minutes into dd rather than 8 minutes, so what gives? Also no swap space was ever used! cat /proc/s........

  • How To Test If Your Hard Drive Is Good/Signs of dying hard drive


    I like dd, although it only reads it, usually a read test of the entire disk will uncover if your hard drive is bad in some parts. This is a good thing to do at least once a month, a lot of times bizarre program behavior, laginess and crashing/unnmounting problems etc.. are due to a failing disc and SMART won't know it or indicate a problem: We must also remember there's never a guarantee, I've found that ever since we moved to larger and more platters per drive with 1TB drives........

  • smart is not smart, it thinks a dead drive is still good


    I had a dying drive that smart thought until it totally disappeared was a good drive, and actually all parameters did look fine but this system was causing my system to lockup and other bad behavior: === START OF INFORMATION SECTION === Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZ20139 Firmware Version: 50.0AB50 User Capacity: 2,000,398,934,016 bytes Device........

  • Centos Solution to "Warning: Unable to open /dev/fd0 read-write (Read-only file system). /dev/fd0 has been opened read-only."


    Warning: Unable to open /dev/fd0 read-write (Read-only file system). /dev/fd0 has been opened read-only. That's a very annoying error, it's simply because Centos for some reason thinks it's wise to load the "floppy" kernel module, who has a floppy drive? I haven't seen or used a floppy for over 12 years! It's more than just annoying, if you probe the drives attached to your system, eg. with grub or partprobe, it keeps trying to locate a flopp........

  • Openvz YUM Error Solution to "[Errno -1] Metadata file does not match checksum Trying other mirror."


    It's weird because I have a nearly identical box and setup and I can update the ovzkernel-PAE* just fine but on this box it doesn't work. I only get this error with the openvz.repo and not others such as Centos-Base.repo With my other server it works normally: ================ Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package ovzkernel-PAE.i686 0:2.6.18-238.12.1.el5.0........

  • GRUB Solution to error "Error 6: Mismatched or corrupt version of stage1/stage2"


    GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.] grub> root (hd1,0) Filesystem type is ext2fs, partition type 0xfd grub> setup........

  • Hitachi 2TB HDS5C3020ALA632 drive DOA


    I had one of these shipped and it was not recognized when plugged in, here's what a dead drive looks like (I assume it's teh circuit board which is dead): ata1: link is slow to respond, please be patient (ready=0) ata1: softreset failed (device not ready) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: link online but device misclassified, retrying ata1: link is slow to respond, please be patient (ready=0) ata1: softreset f........

  • How to recover from dead DRBD partition/hard drive in two simple commands


    This assumes that you've at least created the correct partition for your DRBD already. Notice that I am "diskless", that's because either your DRBD partition doesn't exist/has been renamed (eg. sdb becomes sda when sdb dies and you reboot) or because that drive is really actually dead/gone. *If you need to permanently change the partition/device for your resource be sure to edit /etc/drbd.conf on both hosts and reload the config. (replace r0 with........

  • Kernel/make compilation time and how to improve compile times/compile the Linux kernel faster without hardware upgrades


    I thought only a faster CPUand SSDwould help but I already have a Quad-Core CPU and it wasn't being maxed out. The actual tests were performed on an AMD-V enabled 128MB dual core VMWare container though. There is a flag that can be passed to make in order to start multiple threads, by specifying 4 threads I was able to reduce the whole kernel compilation time from scratch by about 50%! (65minutes vs 31minutes!). *Yes I did do a make clean before each co........

  • List of Free Public DNS Servers IP Addresses


    One thing to note about DNS servers and providers is that they aren't always trustworthy, not even if they're Google or your favorite ISP. Any DNS server can compromise your privacy, and they are likely tracking your browsing habits and keeping logs of it. Sometimes it's for Marketing/Research purposes such as Google's GMail service which they admit is scraped/datamined. I would expect nothing less from their DNS service. The other danger with such widely used and pu........

  • Linux how to use find recursively to find certain types of files/extensions


    Normally if you're in a certain directory you could do: find *.txt and it will work as expected, but it won't work recursively through child directories, here's the correct way to do it: find . -type f -name *.txt The "-type f" is optional because that means only files, but we could have specified d for directory etc... The above command will work recursively as you'd expect. In that way I find "find" to be un........

  • Virtualbox How To Clone VM/Container VDI file


    You can't just do a straight copy of the VDI image of your virtual machine because there is a unique UUID, wellI believe you can and then you can create a new UUID manually (at least you could with VMWARE) but to keep it clean just use this method: VBoxManage clonevdi /path/to/your.vdi outputname.vdi 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% That's all there is to it, just wait for it copy and you can th........

  • SPAMASSASSIN/spamcd solution - spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#2 of 3): Connection timed out


    May 6 08:16:57 devbox spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#2 of 3): Connection timed out May 6 08:17:02 devbox spamc[20214]: connect to spamd on 127.0.0.1 failed, retrying (#1 of 3): Connection timed out spamc[16225]: connect to spamd on 127.0.0.1 failed, retrying (#3 of 3): Connection timed out First make sure that the spamd service is actually running, this is your spamd (spamassassin server) cannot be reached. In my c........

  • Apache Crash Solution Can't Restart Due to Socket In use - (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting d


    (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down This will even trip you up if you have a service like monit to save you if httpd crashes. The only way to fix this is to either wait (it's not an option for production situations) or to kill the ghost httpd processes that wouldn't gracefully close: So........

  • mysql enable slow query logging/Query Cache Solution - find/track cause of slow mysqld/high IO/CPU usage


    If you have a webserver and find you have high IO/lagginess MySQL is one of the first things to check. It turns out MySQL was my problem and it was creating a high load on my server, especially for IO. How to Enable MySQL Slow Query Logging To Find Slow Performance/Queries vi /etc/my.cnf Add this anywhere under [mysqld] #slow queries log-slow-queries = /var/log/mysql/mysqlslowqueries.log long_query_time = 1........

  • Apache High CPU Usage Enable Mod_Status Guide Solution - Find Cause of High CPU Usage Script/Domain


    mod_status is a great way to track down the source of high CPU usage and to find what vhost/script is the cause of it. It gives you a live view of bandwith usage, CPU usage, and memory usage broken down by domain/vhost and script/URI. Enable mod_status vi /etc/httpd/conf/httpd.conf ExtendedStatus On SetHandler server-status Order Deny,Allow Deny from all All........

  • vnstat setup guide/tutorial


    yum -y install vnstat chown nobody.nobody -R /var/lib/vnstat/ #replace venet0 below with your desired interface sudo -u nobody vnstat -u -i venet0 #edit: vi /etc/sysconfig/vnstat #VNSTAT_OPTIONS="-i venet0" # only use the sed below if you are using venet0 instead of eth0 or replace accordingly sed -i 's/eth0/venet0/g' /etc/sysconfig/vnstat [root@monitor]# yum install vn........

  • htaccess modrewrite problem with rewriting url with- dashes solution


    I was getting frustrated with trying to write a simple URL like this: /example-withdash I used the htaccess code like this: Rewriterule ^example-withdash$ / [R=301] I also tried escaping the dash which I thought should have treated it as a literal but that didn't work either: Rewriterule ^example-withdash$ / [R=301] But it wouldn't work, apparently the "-" dash means don't substitute,........

  • PayPal Solution - Error Detected Error Message We were unable to decrypt the certificate id. We were unable to decrypt the certificate id.


    Error Detected........

  • iPhone 3G/3GS/4 Undelete Photos/Videos Datarecovery


    I found this technique listed in many places which shows you how to use a common Linux tool "dd" to dump the raw partition of your iPhone. I give credit to this site for showing me the correct way to dd from the iPhone, I never thought to try it in the other direction:http://log.ijulien.com/post/182804914/iphone-3gs-data-recovery Requirements 1.) Jailbreak your........

  • SMARTCTL additional SMART command testing using short and long tests


    smartctl -t long /dev/sda (note you can specify short, but it's not as thorough as long of course). smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended sel........

  • telnet force escape/quite with Ctrl + ]


    telnet localhost 80 Trying localhost... Connected to localhost). Escape character is '^]'. ^] telnet> A lot of people don't know that "^" means the Control Key, so many times you can't force quite telnet without knowing that (Ctrl + C won't always work). *Just use Ctrl + ] Ihope this saves some time and frustration from some people.........

  • monit example tutorial how to enable status checking and manipulation


    You need to enable the httpd daemon with monit to actually view the status and control, it's not only for the web interface since the httpd is theONLY way of controlling monit and viewing the status. monit monitor all will also reinstate disabled services if they've timed out too much. Just restarting the service will do nothing to re-monitor a service that monit has stopped monitoring due to too many failures. *Also note that /etc/monit.conf i........

  • 2011 Best Laptop - HP 15.6" Laptop featuring AMD Athlon II P340 Processor (G62-420CA)


    My mother needed a new laptop and I recommended her the same one I would have bought myself or my wife, that means the cheapest possible laptop with the most features for the money. This HP shines at this price point and one thing that made me stay away from buying more and recommending HP/Compaq was the poor battery life. Not anymore, this model has an industry leading up to 4 hours of battery life. Key Factors for Choosing It: HDMI Out........

  • pgina can't login after installing


    After Installing pgina I couldn't login to Windows anymore with my blank password Administrator account! An unknown error has prevented your account from being created.nrThis may be due to policy or security settings as well as other machine configuration.nrPlease consult your administrator. Hit F8 to start Windows in Safe Mode and you can login normally and then remove PGina, it shouldn't cause this problem or behavior out of the box.........

  • Drupal 6.2 Install and how to move install to root/non-subdirectory


    drup 6.2 install $cd drupgoodinst3883/ [ drupgoodinst3883]$ ls CHANGELOG.txt cron.php index.php INSTALL.pgsql.txt INSTALL.txt MAINTAINERS.txt modules robots.txt sites update.php xmlrpc.php COPYRIGHT.txt includes INSTALL.mysql.txt install.php LICENSE.txt misc&........

  • Linux High IOWAIT updatedb can't be killed and crash with mdadm


    high IO wait 424 root 39 19 1900 848 552 D 0.0 0.0 0:00.91 updatedb root 424 0.0 0.0 1900 848 ? DN Mar11 0:00 /usr/bin/updatedb -f sysfs?rootfs?bdev?proc?cpuset?binfmt_misc?debugfs?sockfs?usbfs?pipefs?anon_inodefs?futexfs?tmpfs?inotifyfs?eventp........

  • Santrex Review Scam Complaint - Stole My Money Fraud


    Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support admitted the server was not working and to wait for 24 hours. I waited for 4-days, after which they sent an e-mail saying my service was being disabled for SPAM ...(when SolusVM shows 0kb of traffic). Th........

  • Virpus Review/Scam/Complaint


    Virpus Review/Scam/Complaint Virpus is advertised on LEB (lowendbox.com). My initial payment was refunded after days of not receiving the VPS, but two subscrption payments went through and Ionly received notification after the second one. They ignored the requests in the ticket and by e-mail for a refund and even escalated the PayPal dispute that "we're assuming this is for a service that was provided" (when they obviously know otherwise by........

  • 95th Percentile Billing vs Usage Billing, what's better?


    There are all kinds of threads and links on the internet, and this seems to be a contentious issue butI don't know why. 95th percentile is either a good deal for some or a big rip off for others, Ijust said it there :) But the reality is that for MOST people who transfer low amounts of data but burst to higher speeds such as 40mbit+ even for short periods of time, then you'll pay a lot of money to do that. Basically 95th percentile is an-old archaic method........

  • Apache MPM worker vs prefork


    find what MPM Apache is using, it will either be using "worker" or "prefork" apachectl -l Compiled in modules: core.c prefork.c http_core.c mod_so.c In my case it is "prefork" vi /etc/httpd/conf/httpd.conf Find the section that looks like this (by default one will normally exist for prefork and for worker, but in my case I only care a........

  • SPAMASSASSIN Enable Pyzor and DCC


    *Remember to restart spamassassin after all of this. DCC wget http://www.dcc-servers.net/dcc/source/dcc.tar.Z tar -zxvf dcc.tar.Z cd dcc-1.3.138/ ./configure;make;make install #enable DCC, uncomment the line that disables it near the top vi /etc/mail/spamassassin/v310.pre pyzor wget http://sourceforge.net/projects/pyzor/files/pyzor/0.5.0/pyzor-0.5.0.tar.gz/down........

  • Linux - mptbase/MPT Fusion LSI Logic Error mptbase: ioc0: ERROR - didn't initialize properly! (-1)


    kernel 2.6.27.54 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 mptbase: ioc0: Initiating bringup mptbase: ioc0: WARNING - Unexpected doorbell active! mptbase: ioc0: ERROR - Doorbell ACK timeout (count=4999), IntStatus=80000001! mptbase: ioc0: ERROR - Diagnostic reset FAILED! (102h) mptbase: ioc0: WARNING - NOT READY! mptbase: ioc0: ERROR - didn't initialize proper........

  • VPS Server Scam/Review/Complaint List


    These are the only two I've encountered but here is the low-end and note my story is not at all unique. In my case I was scammed out of money and did not receive any service at all from either company. Santrex Review/Scam/Complaint Santrex never provided any working server, I believe it was just a dummy management Solus server because the server said it was booted but never connected to the console. I complained to them and eventually the support adm........

  • Enable SPAMASSASSIN on Postfix in 5 minutes


    Centos 5 Postfix and SPAMASSASSIN Tutorial yum install spamassassin chkconfig spamassassin on vi /etc/mail/spamassassin/local.cf ############## #required_hits 5 #report_safe 0 #rewrite_header Subject [SPAM] #5 is the least restrictive (means only the most obvious SPAM is caught. 0 is obviously the most restrictive/sensitive and would have lots of false positives require........

  • VOIP/Asterisk/FAX Error Problems Solution NOTICE[11389]: rtp.c:1808 ast_rtp_read: Unknown RTP codec 100 received from


    NOTICE[11389]: rtp.c:1808 ast_rtp_read: Unknown RTP codec 100 received from I've found that trying several times may work, but I also read changing your Sipura VOIP adapter settings as follows helps (but it still fails for me sometimes): In adapter change the following under SIP/Advanced Codec to G711a from G711u Passthru Method from: NSE to ReINVITE FAX CED Detect Enable: Yes FAX CNG Detect........

  • Directadmin DA Install Guide


    yum -y install openssl* gcc-c++ gcc flex g++ make;wget http://www.directadmin.com/setup.sh;chmod +x ./setup.sh;./setup.sh #enable SSL /usr/bin/openssl req -x509 -newkey rsa:1024 -keyout /usr/local/directadmin/conf/cakey.pem -out /usr/local/directadmin/conf/cacert.pem -days 9999 -nodes chown diradmin:diradmin /usr/local/directadmin/conf/cakey.pem chmod 400 /usr/local/directadmin/conf/cakey.pem sed -i "s/SSL=0/SSL=1/g" /usr/local/dire........

  • ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory solution


    ls ls: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directory This is not an ldd problem or case of anything missing, this only happened after I upradedUbuntu. declare -x PATH="/home/user/bin:/usr/local/bin:/usr/bin:/bin:/usr/games" "/home/user/bin" is the problem! It's weird because I have no idea how it happened.........

  • Linux use XMessage to popup a message in XWindows


    xmessage "Your message here" -display :0 This will popup a window with the message, it would be cool if it allowed two way communication though. I found the info in this post: http://en.andregondim.eti.br/?p=72........

  • Convert doc images/jpg/jpeg to PDF


    Use "ImageMagick" which can be installed easily on most UNIX/Linux distros. Remember that it will go with the standard file listing to determine the order but I believe you can manually specify multiple jpg's in the arguments. Convert image/jpg to PDF convert *.jpg yourpdf.pdf This is a very handy and free tool. Convert DOC/TXT documents to PDF If you wanted to convert a .doc file or text........

  • Openvz Enable TUN/TAP OpenVPN


    Make sure the module "tun" is loaded on the host. vzctl set 2000 --devnodes net/tun:rw --save *Note what's below is what OpenVZ says you need (but I've never had to do it) vzctl exec 2000 mkdir -p /dev/net vzctl exec 2000 mknod /dev/net/tun c 10 200 vzctl exec 2000 chmod 600 /dev/net/tun On the container test the device: when Something is wrong:........

  • Amarok won't play songs, keeps skipping to the next


    Amarok won't play songs, keeps skipping to the next Some say install install phonon-backend-xine but it was already installed automatically, obviously that's not the problem or solution. Settings -> Configure Amarok Playback: Configure Phonon Audio Output: Music It should show your different audio interfaces, choose Pulse Audio and move it to the top of the list, do the Apply, OK and manually quit Amarok (remember to close it from the tra........

  • SSH Tunnel Dynamic Proxy Stops Working Right Away even with Root and High Port


    I keep getting messages like this shortly after using the proxy (it works for a few seconds/page loads and then stops): channel 12: open failed: administratively prohibited: open failed I'm not sure what the issue is unless there's some kind of hardware firewall on the other end. I've used this exact configuration on multiple servers with no issue and even disabled iptables etc..........

  • sshfs cannot unmount error: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))


    umount: /home/diret/mount: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) I tried everything (fusermount -u) to unmount it but the only thing that worked was actually doing this: ps aux|grep sshfs Then I identified the sshfs connection and did: kill -kill pid........

  • Thunderbird/MBOX to IMAP/Maildir migration done easy with mb2md


    Convert MBOX Mail files into Maildir using Linux *You need perl an the TimeDate module Get the free Perl script mb2md from the project/author's site: wget http://batleth.sapienti-sat.org/projects/mb2md/mb2md-3.20.pl.gz gunzip mb2md-3.20.pl.gz #remember you need timedate or you'll get this error: ./mb2md-3.20.pl Can't locate........

  • MySQL NEVER delete ib_logfile0 or ibdata1 or you'll lose data


    don't delete /var/lib/mysql/ib_logfile0 or ibdata1 or mysql won't restart I didn't realize they were internal and not part of replication like the relay files! /usr/libexec/mysqld: ready for connections. Version: '4.1.22-log' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution 110127 16:31:00 [Note] /usr/libexec/mysqld: Normal shutdown 110127 16:31:00 InnoDB: Starting shutdown...........

  • Postfix/Any Email Server check for Open Relay


    The first thing you need to remember is not to check from the same host/server itself. This is a silly mistake I made, the reason is that many mailservers and especially postfix are configured to allow relaying from the localhost/same host. If you do that you'll get a false positive. *Make sure you test from another host/system than the mail server itself! telnet yourmailserverhost.com 25 220 Courier (FreeBS........

  • MySQL Out of Range Solution for DATETIME field


    Affected rows: 0 Warning: #1264 Out of range value adjusted for column 'deleteon' at row 1 SQL query: UPDATE `custtable`.`custinfo` SET `deleteon` = '2011-02-29 00:00:00' WHERE `custinfo`.`custid` =105 LIMIT 1 ; This happened after a migration to a new SQL database due to user error. The old database server MySQL 3.23 or 4 allowed an impossible date to be entered by a user. As we know February 29th DOESNOT exist but the database al........

  • email server messsages rejected without reverse DNS DNS check failure Client host rejected: cannot find your reverse hostname Cannot resolve PTR record


    Basically you should always be 100% sure that whatever IPyour mail server sends out with has reverse DNS/PTR records. Remember that unless you own your IPs then you won't be able to set your own reverse DNS. Even if you were to create a reverse PTR record on your DNS servers it will be ignored. Reverse DNS is queried to pre-assigned DNS servers of your ISP, so therefore you'll need to contact your ISP/Colo/Hosting provider to do a reverse DNS entry. If you don't have........

  • MySQL Replication/Dual-Master vs Clustering


    Many people aren't aware but recently Dual-Master Replication setups have become increasingly popular. That's because you get similar features and benefits of having a full-blown cluster (difficult to setup and maintain and requires I believe 3 servers just as controllers). With a dual-master you just have a different off-set for the keys and you should be good, but of course there is the chance that at some point replication will halt because of an unexpected or unforseen error........

  • Dovecot Enable SSL/TLS with your certificate


    Dovecot enable SSL (by default it uses an old expired cert if you choose pop3s and imaps as protocols) =================== Create Cert & Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key mkdir /etc/mailssl chmod 700 /etc/mailssl cp server.* /etc/mailssl Edit /etc/dovecot.conf ssl_cert_file = /etc/mailssl/server.crt s........

  • Postfix Enable SSL/TLS with your certificate


    Create Cert & Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key mkdir /etc/mailssl chmod 700 /etc/mailssl cp server.* /etc/mailssl Postfix SSL config Edit /etc/postfix/main.cf: #SSL stuff smtpd_tls_cert_file = /etc/mailssl/server.crt smtpd_tls_key_file = /etc/mailssl/server.key To make smtps w........

  • Understanding /etc/aliases from sendmail when using with postfix or other MTA's


    understanding /etc/aliases *remember to apply changes you need to run "newaliases" after editing /etc/aliases one thing I don't get is that it doesn't allow you to specify the whole e-mail address on the left-hand side eg: yourfullemail@domain.com: someotheremail@domain.com postalias: warning: /etc/aliases, line 109: name must be local (if you try the above) It works more like this: your........

  • named/bind cannot find zone file, load zone files without specifying full directory path/loading master file genuine.com.zone: file not found


    genuine.com/IN: loading master file genuine.com.zone: file not found _default/genuine.com/IN: file not found I always found it silly that no one really talks about this and apparently many like me and even control panels like Plesk were still using hard paths. I always thought "why can't I just specify the name of the zone file and have bind find it". Surely the default search path must be /var/named or somewhere else but there is no such thing.........

  • PHP5 & Apache Blank/White Screen/Page PHP won't work


    PHP5 & Apache Blank Screen/Page The PHP package is installed and works from the CLI Error reporting is enabled The only way I could get it working was: rm /etc/php.ini yum remove php yum install php-* -x php-pear* -x php-pecl* Interestingly enough reinstalling php did not bring back the deleted php.ini but everything is working. ........

  • updatedb/mdadm caused a kernel panic?


    Jan 16 04:02:03 centosbox syslogd 1.4.1: restart. Jan 16 04:07:34 centosbox kernel: INFO: task updatedb:20771 blocked for more than 300 seconds. Jan 16 04:07:34 centosbox kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jan 16 04:07:34 centosbox kernel: updatedb D F78BE050 6476 20771 20766&n........

  • Ubuntu 9.04 Crash


    CPU/Kernel/MB/RAID problem? Jan 5 12:45:05 testbox kernel: [653298.890004] BUG: soft lockup - CPU#0 stuck for 61s! [hal-acl-tool:4168] Jan 5 12:45:05 testbox kernel: [653298.890005] Modules linked in: vmnet vmci vmmon binfmt_misc drbd video output input_polldev ocfs2_stackglue ocfs2_dlmfs ocfs2_dlm ocfs2_nodemanager configfs k8temp hwmon_vid lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi........

  • Webmin/Virtualmin when enabling bind: Failed to save enabled features : Virtualmin is configured to setup DNS zones, but this system is not setup to use itself as a DNS server. Either add 127.0.0.1 to the list of DNS servers, or turn off the BIND fe


    Webmin/Virtualmin when enabling bind: Failed to save enabled features : Virtualmin is configured to setup DNS zones, but this system is not setup to use itself as a DNS server. Either add 127.0.0.1 to the list of DNS servers, or turn off the BIND feature on the module config page. It means what it says, add "127.0.0.1" to /etc/resolv.conf........

  • ERROR! MySQL manager or server PID file could not be found! ERROR! Manager of pid-file quit without updating file.


    I found the cause of this issue was from all the diskspace being used but clearing it was not enough. Iguess the tables became inconsistent when space ran out and myisamchk is what fixed the rest. service mysqld restart ERROR! MySQL manager or server PID file could not be found! ....................................................................................... ERROR! Manager of pid-file quit without updating file. se........

  • VMWare bridged adapter not working: The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet1.


    VMWare bridged adapter not working: Message from system: The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet1. I'm not sure how to fix this but one of the issues is that my eth0 became eth1 after moving my hard drives to a new motherboard. I have run the vmware-config.pl but this did not resolve the issue.........

  • Installing Webmin & Enabling SSL


    Webmin Setup Centos 5: wget http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html&ts=1294339690&use_mirror=surfnet [1] 24229 [2] 24230 [root@host ~]# --2011-01-06 21:48:20-- http://downloads.sourceforge.net/project/webadmin/webmin/1.530/webmin-1.530-1.noarch.rpm?r=http%3A%2F%2Fwww.webmin.com%2Fstandard.html Resolving downloads.sourceforge.net... 216.34.181.........

  • Virtualmin/Webmin Postfix Error: The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..


    Virtualmin Postfix Error: The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active .. A problem was found with your Postfix virtual maps : No map sources were found in the Postfix configuration .. your system is not ready for use by Virtualmin. ........

  • mdadm Centos 5 automatic resync


    This made me nervous but it's clearly a cronjob based on the messages log that happens every Sunday at about 4:22. I actually can't find any evidence of it in cron.d cron.daily but it is there somewhere obviously. What I don't get is why doesn't this cronjob do a datacheck like Ubuntu's cronscript does? When you unnecessarily rebuild the array you lose your redundancy during that point which makes your data extremely vulnerable. *Update I did a grep of &q........

  • SSH delay problem UseDNS and disabling GSSAPI does not help


    The normal solution doesn't help or apply here: ssh -v user@192.168.5.41 OpenSSH_4.3p2 Debian-9etch3, OpenSSL 0.9.8c 05 Sep 2006 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.5.41 [192.168.5.41] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: i........

  • Walmart.ca & Ubuntu Caused Xorg 100% CPU usage


    I can't tell if it's Flash or Javascript that they were using, but it basically caused my sysetm to lockup until I closed that one page. Is this proof enough that Wal-mart is evil?:) I've never seen that before, it's weird how certain things mask themselves as high CPU usage with Xorg, unless it is some kind of weird Xorg problem but I believe it's more of a Flash/Javascript issue from Firefox in Wal-mart's evil scripting.........

  • mdadm/md-check how to check array integrity without rebuilding


    This doesn't seem to be widely known (maybe it's in some documentation that none of us read though)but there's an easy way to check the integrity of any mdadm array: sudo echo check > /sys/block/md0/md/sync_action -bash: /sys/block/md0/md/sync_action: Permission denied sudo will never work, this only works as root since echo is not actually a binary/command. It is built-into bash. /sys/devices/virtu........

  • Cygwin and crontab backups via ssh/scp/rsync


    Install the "Editors" and "Net" groups that will give you rsync, ssh, ssh-keygen and cron. The trickiest thing that I keep forgetting about each time is you have to run "cron-config" which adds the cron service to Windows, and without doing that obviously no cron jobs will be run thus making automatic backups impossible. Warning about rsync/cygwin and using the -a archive switch. It's a good thing I caught this because it doesn't work ri........

  • VBulletin How To Change Welcome E-mail


    Login as Admin Languages & Phrases -> Search in Phrases Choose "Phrase Variable Name Only" Search for: welcomemail Edit the "Translation" box with what you'd like in it.........

  • md: data-check of RAID array md3


    This really made me nervous but notice the mdstat says "check". This is because in Ubuntu there is a scheduled mdadm cronscript that runs everyday on Sunday at 00:57 that checks your entire array. This is a good way because it prevents gradual but unnoticed data corruption which Inever thought of. As long as the check completes properly you have peace of mind knowing that your data integretiy is assured and that your hard drives are functioning properly (I'........

  • Dying Seagate 7200.11 SD15


    [137392.910057] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x80000 action 0x6 frozen [137392.910077] ata4: SError: { 10B8B } [137392.910095] ata4.00: cmd 60/20:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 16384 in [137392.910099] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [137392.910122] ata4.00: status: { DRDY } [137392.910135] ata4: hard resetting link [137393.440060] ata4: SATA link........

  • vmare server - Cannot open the disk '/mnt/sda4/vmware/Debian/hdd.vmdk' or one of the snapshot disks it depends on. Reason: Failed to lock the file.


    Go into the directory for your Virtual Machine and delete all ".lck" directories. rm -rf *.lck After that your server should boot.........

  • Ubuntu 10.04/GNOME Volume Control Missing From Panel/Indicator Applet


    What this really refers to is gnome-volume-control-applet which is what controls the volume in the panel/indicator applet. In Ubuntu 10.04 it is just the applet mentioned above, run that from the command line and it will start. I lost mine when I removed pulseaudio trying to fix audio issues with Flash and Opera. It also removes the gnome-volume-control-applet from starting. *Ialso note........

  • mdadm: metadata format 00.90 unknown, ignored.


    mdadm: metadata format 00.90 unknown, ignored. This happens with various versions of older mdadm such as mdadm - v2.6.7.1 - 15th October 2008 It is all because an extra 0 in 00.90 in /etc/mdadm/mdadm.conf that it doesn't like (it doesn't seem to cause any problem except that message though): Solution - Edit your /etc/mdadm/mdadm.conf and change 00.90 to 0.90 in your arrays: ARRAY /dev/md3 level=raid1 num-devices=2 metadata=0.90 UUID=f41a4644:6b2a05f........

  • rsync preserve attributes, permissions/ownership and times without being root non-root user


    One of the purposes of rsync is to backup whole filesystems and archive them but how can you do that properly and restore things to normal if all permissions and ownerships are not preserved from your root filesystem? It's not desirable to have everything running as root, especially not just for an rsync. The Easy rsync preserve permission solution for non-root users sudo is the answer and all you have to do is edit /etc/sudoers At the end o........

  • Ubuntu/Debian DRBD 8.0 Setup Guide


    I've only used it on Centos, soI thought I'd make a quick Debian guide: Install the DRBD Package apt-get install drbd8-utils Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libswfdec-0.8-0 Use 'apt-get autoremove' to remove them. The following........

  • VMWare Server cannot connect to web interface SSL Handshake on client connection failed: SSL Exception


    VMWare log: /var/log/vmware/hostd.log SSL Handshake on client connection failed: SSL Exception sudo /etc/init.d/vmware-mgmt restart Stopping VMware management services: VMware Virtual Infrastructure Web Access VMware Server Host Agent&nb........

  • Outsourced VPS Support


    The Xen VPSI had was not working properly and when they asked for the login information I found the support was coming directly from India: whois 122.178.148.* [Querying whois.apnic.net] [whois.apnic.net] % [whois.apnic.net node-5] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 122.178.128.0 - 122.178.191.255 netname:&........

  • yum in Centos 5/Xen halts and exits suddenly


    yum exits in the middle The problem is this VPS seems to be an OpenVZ template from HyperVM. The only way to make it work was to disable i386 packages since this was an x64 kernel. That shouldn't be necessary but it was the only way to make yum stop quitting after the first package or two. I couldn't find any issue by checking the logs either. echo y|yum install vim-minimal telnet expect jwhois net-tools slocate iptables elinks gawk L........

  • WD EARS/Green 2TB Cannot Disable Power Saving/Head Parking with hdparm


    hdparm -B 255 /dev/sdb /dev/sdb: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error The one thing you can do though is to set hdparm spindown time lower (it doesn't seem to work that well). -S set standby (spindown) timeout hdparm -S 251 /dev/sda /dev/sda: setti........

  • yum error with some versions of Centos Refusing to automatically import keys when running unattended. Use "-y" to override.


    Refusing to automatically import keys when running unattended. Use "-y" to override. When using echo y|yum install gcc Fix with rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*........

  • mdadm RAID 1 adventures


    I separated the 2 drives in the RAID 1 array. 1 is the old one /dev/sda and is out of date, while the separated other one /dev/sdc was in another drive and mounted and used with more data (updated). I wonder how mdadm will handle this: usb-storage: device scan complete md: md127 stopped. md: bind md: md127: raid array is not clean -- starting background reconstruction raid1: raid set md127 active with 1 out of 2 m........

  • WD (Western Digital) Advanced Format Drive Lagged/Slow Speed/Performance/Design Flaw EAD/EARS problem WDC WD20EARS-00S8B1


    Let the numbers speak for themselves, from what I read the Load_Cycle_Count which is very high (more than 500,000/half a million times) is the number of head parks. What a stupid"Green" design and design flaw which will probably mean an early life for the drive. This is almost as silly as Seagate's new reputation for BSY/poor quality disks since the 7200.11 series. To make it worse this is also when Western Digital introduced "Advanced Format" o........

  • Firefox plugin-container high CPU usage


    This is an easy fix and highlights a huge issue again with Linux and Flash still not playing nicely/working as well as Windows yet. Solution - Go to "about:config" and disable the two entries (set them to false): dom.ipc.plugins.enabled.libflashplayer.so dom.ipc.plugins.enabled.libnptest.so........

  • mdadm won't boot due to fsck error


    Nov 29 20:17:58 ubuntu kernel: [ 1157.180789] md: md1 stopped. Nov 29 20:17:58 ubuntu kernel: [ 1157.180829] md0: unknown partition table filesystem not responding/reading properly with du or rsync (this needed an fsck). [ 2571.489217] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923106 [ 2571.942299] EXT3-fs error (device md2): ext3_lookup: deleted inode referenced: 35923110 [ 2571.9568........

  • Ubuntu 10.04/GRUB2 mdadm won't boot


    Moving to RAID was a pain. What you have to do is the following from an existing install: Install mdadm Create your mdadm RAID 1 array on your spare hard drive. Start it with the missing disk. rsync the entire contents of your current / to the md partition. Here's a good way of doing it: rsync -Pha --exclude=/proc/* --exclude=/sys/* --exclude=/mnt/* /. /mnt/md2........

  • How to chroot properly into your OS/distro


    From a LiveCD or if you're doing something like converting your non-RAID install to mdadm here's how you would chroot properly (you have to mount your proc, sys and dev on the running system/LiveCD to your chroot environment if you want things to work right, especially if you need to run update-initramfs due to a driver change etc..) *replace "path" with your mount/chroot path mount -o bind /proc /mnt/path/proc mount -o bind /dev/ mnt/pa........

  • EOL for Kubuntu/Ubuntu 8.04 - W: Failed to fetch http://ca.archive.ubuntu.com/ubuntu/dists/intrepid/universe/source/Sources.gz 404 Not Found [IP: 91.189.92.171 80]


    I couldn't figure out whyI couldn't install a simple package. This is what's annoying about cutting edge Debian distros, yes we know you support each license on average for 1-2 years but why take down the supporting binary packages and basically disable the older versions? sudo apt-get install update Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find p........

  • http://apt.sw.be/redhat/el5/en/i386/test/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found Trying other mirror.


    http://apt.sw.be/redhat/el5/en/i386/test/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmforge-testing. Please verify its path and try again Notice it is complaining about "rpmforge-testing", just disable it for now: Solution is to edit the repo: vi /etc/yum.repos.d/rpmforge-testing.repo........

  • Wine stopped working/won't work Solution


    After an upgrade wine wouldn't open anything, not even the pre-installed notepad. There are no wine logs and nothing is mentioned in any standard log file about why. I finally decided to run wine from the shell and see what's going on: wine client error:0: version mismatch 398/402. Your wineserver binary was not upgraded correctly, or you have an older one somewhere in your PATH. Or maybe the wrong wineserver is still running?........

  • GNOME/Nautilus Resize Images/Pictures from File Manager by right clicking


    Just install the following package "nautilus-image-converter" and you will be able to right click any image and convert the size and rotate it. My only wish is that you could also convert the image type from say tiff to jpg etc... This is an awesome/handy/feature and great tool to have. This is one way where GNOME/Nautilus excel, the possibilities are endless to simplify and make simple/mundane tasks quicker and more efficient than ever.........

  • Buffer I/O error on device fd0, logical block 0


    Virtually no system has a floppy disk drive anymore but you will often find your Linux distribution insists that you do or should have one :) The solution is to remove the floppy module and prevent it from loading on the next reboot. rmmod floppy Centos/RHEL echo "blacklist floppy">> /etc/modprobe.d/blacklist #update initramfs so it takes effect dracut........

  • PHP CURL SSL won't work or connect


    I spent so much time debugging this, most sites don't tell you a very important option to use with CURL and you will only find out this is the problem by running the PHP script from the command line you get the following output that shows the issue (I don't see any way to get this output from Apache itself). * About to connect() to ip.ip.ip.ip port 25000 * Trying ip.ip.ip.ip... * connected * Connected to ip.ip.ip.ip (ip.ip.ip.ip) port 25000 * succes........

  • Initializing quota ... Error: Not enough parameters, diskinodes quota not set


    Initializing quota ... Error: Not enough parameters, diskinodes quota not set vzctl set $veid --diskinodes 90000:91000 --save New versions of OpenVZ seem to have some strange diskinodes parameter which is required.........

  • expect script debugging


    expect script debugging Add the "-d" switch. #!/usr/bin/expect I have a problem writing something to a telnet session: send: sending "statusn" to { exp6 } send: sending "quitr" to { exp6 } write() failed to write anything - will sleep(1) and retry... The solution for my telnet script was to add the &q........

  • connect: No buffer space available Oct 18 12:21:03 vps kernel: printk: 177 messages suppressed. Oct 18 12:21:03 vps kernel: Neighbour table overflow.


    ping test.com connect: No buffer space available /var/log/messages Oct 18 12:21:03 vps kernel: printk: 177 messages suppressed. Oct 18 12:21:03 vps kernel: Neighbour table overflow. Solution in /etc/sysctl.conf: net.ipv4.neigh.default.gc_thresh1 = 4096 net.ipv4.neigh.default.gc_thresh2 = 8192 net.ipv4.neigh.default.gc_thresh3 = 8192 net.ipv4.neigh.default.base_reachab........

  • [function.vB-Registry-include]: failed to open stream: No such file or directory in /www/vhosts/site.com/forums/includes/class_core.php on line 2394


    [function.vB-Registry-include]: failed to open stream: No such file or directory in /www/vhosts/site.com/forums/includes/class_core.php on line 2394 This happens on a new vBulletin install where you haven't created the config.php file. Simply copy the config.php.new file into config.php and you'll be good to go.........

  • Directadmin License Error The ip of this machine (xx.xx.xx.xx) does not match the ip in the license file.
    Check the value of your ethernet_dev=venet0:0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifco


    2010:09:09-22:22:11: The ip of this machine (xx.xx.xx.xx) does not match the ip in the license file. Check the value of your ethernet_dev=venet0:0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifconfig Solution /usr/local/directadmin/scripts/getLicense.sh........

  • Openvz Error Starting OpenVZ: failed to load module vzmon [FAILED]


    service vz start Starting OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzmon: Unknown symbol fini_ve_route6........

  • OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzm


    service vz start Starting OpenVZ: failed to load module vzmon [FAILED] vzmon: Unknown symbol ve_snmp_proc_init vzmon: Unknown symbol addrconf_sysctl_free vzmon: Unknown symbol ve_ndisc_init vzmon: Unknown symbol addrconf_ifdown vzmon: Unknown symbol ip6_frag_cleanup vzmon: Unknown symbol fini_ve_route6 ........

  • Openvz Quick Install for CentOS 5 Tutorial


    cd /etc/yum.repos.d wget http://download.openvz.org/openvz.repo rpm --import http://download.openvz.org/RPM-GPG-Key-OpenVZ yum install ovz-kernel-PAE Now remember to set /etc/sysctl.conf to "net.ipv4.ip_forward = 1" You can apply the change immediately by running sysctl -w net.ipv4.ip_forward = 1 but remember that you still have to set sysctl.conf sysctl -p will load and apply any changes to s........

  • Subnet Mask Lengths / Quick Reference


    Subnet Mask Lengths / Quick Reference This is for when you say how many IPs would be in a /20 or /24 Now instead of doing math just remember this table or visit here more often :) /32 1 IP Address(es) /31 2 IP Address(es)........

  • Linux How To Add/Delete A Default Route/Gateway


    Remember to replace "eth0" with your NIC device although usually it will be eth0. Replace 192.168.1.1 with your default gateway, remember you can also add multiple gateways by adding a second/different default gateway. route Kernel IP routing table Destination Gateway Genmask&nb........

  • DRBD WFConnection Problem/Solution


    This has stumped me a few times because I keep forgetting that Centos 5.5 comes with a default iptables configuration that ends up blocking DRBD traffic,I tried all the normal things and couldn't understand why I couldn't make my normal DRBD config work. So if you have WFConnection problems and have tried the normal "mailing list" fixes, check your firewall status first! Both Nodes Say the Following: version: 8.3.8 (api:88/prot........

  • CPanel Cannot Login Internal Server Error Could not fetch uid or gid for : root https://192.168.1.42:2083


    Internal Server Error Could not fetch uid or gid for : root https://192.168.1.42:2083 The reason for this is because the administration port is actually on port 2087, change the port and you'll be good to go.........

  • sed script to automatically update IPs in named/BIND and httpd/Apache


    Always make a backup of the original file before trying this, I find this kind of thing when updating IPs etc.. to use a script. Where the old IP is "192.168.5.8" and the new IP is "10.10.5.8" sed -i s/192.168.5.8/10.10.5.8/g testdomain.org.db The -i with sed means "inline" meaning we edit the file directly, but without the -i we could just use >and output the results to another file or do whatever else we wanted.........

  • mdadm Linux Software RAID QuickStart Guide


    Create New RAID 1 Array: First setup your partitions (make sure they are exactly the same size) In my example I have sda3 and sdb3 which are 500GB in size. mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sda3 /dev/sdb3 mdadm: array /dev/md2 started. Check Status Of The Array *Note I already have other arrays md0 and md1. You can see below that md2 is syn........

  • HeartBeat Error/High Load heartbeat: [7120]: WARN: Gmain_timeout_dispatch: Dispatch function for retransmit request took too long to execute: 20 ms (> 10 ms) (GSource: 0x926b390)


    My LOG is flooded with those messages many times per second. I don't know what is wrong with heartbeat, but restarting the service fixed it.........

  • VirtualBox Error Failed to start the virtual machine Centos 5.5 Mirror. Medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' is not accessible. UUID {a1a9fad7-0402-4867-b8f3-39fb49454bc5} of the medium '/home/testuser/.VirtualBox/HardD


    Virtualbox Error I tried to copy a .vdi of one container to use in another one, basically to clone instead of having to install the OS again. Failed to start the virtual machine Centos 5.5 Mirror. Medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' is not accessible. UUID {a1a9fad7-0402-4867-b8f3-39fb49454bc5} of the medium '/home/testuser/.VirtualBox/HardDisks/Centos 5.5 Mirror.vdi' does not match the value {4945a0e8-0ed5-4736-9088-bcaf........

  • Installing Virtualbox on Centos 5.5


    wget http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm rpm -i http://download.virtualbox.org/virtualbox/3.2.8/VirtualBox-3.2-3.2.8_64453_rhel5-1.i386.rpm error: Failed dependencies: libGLU.so.1 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386 libSDL-1.2.so.0 is needed by VirtualBox-3.2-3.2.8_64453_rhel5-1.i386 libXmu.so.6 is needed b........

  • Openvz Live Migration Error - Error: undump failed: Invalid argument Restoring failed: Error: iptables-restore exited with 2 Error: Most probably some iptables modules are not loaded Error: rst_restore_net: -22


    Adding IP address(es): 192.168.5.8 192.168.5.9 Setting CPU units: 1000 Error: undump failed: Invalid argument Restoring failed: Error: iptables-restore exited with 2 Error: Most probably some iptables modules are not loaded Error: rst_restore_net: -22 Container start failed Stopping container ... Container was stopped Container is unmounted Error: Failed to undump VE Resuming... vzquota : (erro........

  • DirectAdmin Install Webalizer Stats


    I can't believe it comes without any sort of stats built-in and they don't make it easy to find out how to integrate it. I downloaded the following: wget -O /usr/bin/webalizer http://files.directadmin.com/services/es_5.3/webalizer chmod 755 /usr/bin/webalizer echo "action=tally&value=all" >> /usr/local/directadmin/data/task.queue........

  • Ubuntu Linux HTML Rendering left bracket < problem appears as 003C box


    In Ubuntu when quoting in a forum that would include a left < bracket it often appears garbled as a box with 003C inside. Also with phpbb anything inside the "code" field appears garbled and as gibberish. For some reason I can't find anyone else complaining about this and have not found a solution for it, but it's very annoying.........

  • Linux Kernel Boot Black Screen of Death Freeze/Halt Solution


    This happens on some systems due to a video issue with Intel Videocards, after you see the kernel load you may see almost immediately that you get a black screen. The following kernel parameters usually solve it: nomodeset i915.modeset=0 xforcevesa some people just use "nomodeset" and others use "i915.modeset=0". I think nomodeset may also do the same for each video driver so it may imply i915.modeset=0 anyway but I am not sure.........

  • Linux Kernel Freeze/Hang during boot on io scheduler cfq registered (default)


    You'll see the following and the boot process will freeze: io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) I have struggled with this issue on vari........

  • VirtualBox/VBOX Centos 5.5 Installation Kernel Freeze Problem "NET: Registered protocol family 2" And Solution


    NET: Registered protocol family 2 The above is the last thing that I ever saw, I tried pci=routeirq etc.. and it wouldn't work. The solution is to enable IOAPIC in the VBOX Settings Just enable "IOAPIC" in the settings for your Centos Guest and you'll find the kernel boots just fine. I wonder if a physical system might stall in this same way if the BIOS has IOAPIC disabled which many people do as a troubleshooting method. ........

  • Ubuntu 10.04 Linux is still not ready for the Desktop world


    I am a huge fan of Linux and the idea of OpenSource but I've said it many times, there are still hurdles in today in 2010 for Linux as a Desktop. Linux is still intended for servers at its very core. This can be changed succesfully though, as Apple has shown us with Mac OS X based on FreeBSD. Half of the issue is lack of driver support and the other half is the Linux Kernel and Window Manages, KDE and GNome still both don't cut it (but they're getting closer). I'll........

  • Shutdown/Power/Halt In Debian/Ubuntu/Centos Guide Systems Doesn't Work


    Different distributions such as Debian and Centos behave differently when trying to shutdown your system. shutdown -H now on Debian does not do what you'd expect. The system won't power down, it will halt and do everything but power down. shutdown -PH now will do the job though (actually power the system off). This is important to test especially if you are not near the system. If you just use -P it forcefully shuts off which is not........

  • OpenVZ/vzctl how to do an on-line migration without downtime


    vzmigrate --online dest-host VEIDNO eg.: vzmigrate --oneline 192.168.1.55 101 One option I would recommend is "--keep-dst", that way if the migration is interrupted you can still bring the VPS back up on the original host. After the migration is successful you can manually destroy it. OpenVZ has a good writeup on this including Checkpointing and Restoring etc:........

  • OpenVZ iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Solution


    This error is annoying, in a Virtuozzo KB entry about this ip tables nat problem they say the kernel needs to be ugpraded: Symptoms The node runs 2.6.18-x kernel older than 2.6.18-028stab053.10. NAT module does not work in container, you get "can't initialize iptables table 'nat'" error: # iptables -t nat........

  • Local policy does not permit you to log on interactively. - Solution/Fix


    For a standalone system the solution is simple, just use the same version of Windows a copy a good version of: C:windowsSecurityDatabasesecedit.sdb from another computer. Then you should be able to login again without getting the nasty message "Local policy does not permit you to log on interactively." Of course you will probably need a way of accessing the filesystem off-line in order to get to it such as a Linux boot disc. Some........

  • jailkit for chroot ssh account security tutorial and fix for error


    This was done on Centos butI think it's easier on Debian machines, the paths that it is set to use are tailored towards Debian, so there is some fiddling that needs to be done on Centos. This is for chrooting ssh, but jailkit has other uses than just SSH jails but I won't cover them in this writeup. 1. Install jailkit yum install jailkit 2. Setup Jail Home mkdir /home/jail chown root:root /home/ja........

  • exim high load and dozens of processes


    This server was experiencing loads of up to 80 and maxing out the RAM and kmemsize on a CPanel VPS. There were literally dozens if not hundreds of exim processes. I have no idea why exim has such a design that would allow it to consume this much CPU and RAM. Any normal MTA should not be spawning so many processes, it should be processing them in sequence and if it is going to spawn hundreds of processes in response to a large volume of mail, it's better to have a delayed del........

  • After installation Directadmin does not work directadmin dead but pid file exists on OpenVZ VPS when browsing http://ip.ip.ip.ip:2222


    After installation Directadmin does not work on OpenVZ VPS when browsing http://ip.ip.ip.ip:2222 service directadmin status directadmin dead but pid file exists tail /var/log/directadmin/error.log Check the value of your ethernet_dev=eth0 setting in your /usr/local/directadmin/conf/directadmin.conf file and the output of /sbin/ifconfig 2010:07:10-12:44:01: ioctl can't find........

  • md: kicking non-fresh sda1 from array! - fix/solution


    md: Autodetecting RAID arrays. md: autorun ... md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: md: kicking non-fresh sda1 from array! md: unbind md: export_rdev(sda1) raid1: raid set md0 active with 1 out of 2 mirrors The md0 raid kicked sda1 ou........

  • Linux looking for a way to convert XLS/Excel Spreadsheets into Plain Text?


    catdoc.i386 : Decodes MS Word files into plain text or TeX format I haven't figured out how to use it, it is really not clear or obvious but it should do the job if you can figure it out. Usage: catdoc [-vu8btawxlV] [-m number] [-s charset] [-d charset] [ -f format] files........

  • Linux Burn MP3 CD On the Fly using


    I finally decided to look into some utils that did this, and the first one I found is "mp3burn". It is unbelievable simple and perfect. *2017-11 update and mp3burn is still available in standard repos such as Ubuntu 14/16 so this is a current and working project. Just install the package and it gets all required libraries to convert and then burn's on the fly. And you won't believe how simple it is. I just want to a directory that had the MP3's I wanted t........

  • Realtek r8169 1gbit/1000mbit NIC/Ethernet Goes Down/Halts on Large File Transfer/Heavy Network Usage


    This is obviously a bug in the r8169 kernel module and it seems to affect a lot of people. I upgraded to the latest kernel and hope this won't happen anymore, as it is a very serious error. This is especially serious for those who are running servers with this chipset, who can afford for the NIC to randomly go off-line for no apparent reason? [655548.189113] type=1505 audit(1277067560.902:5): operation="profile_load" name="/usr/bin/freshclam&q........

  • MySQL Insert Statement ONLY IF a duplicate entry does not exist


    This is a great way to reduce MySQL code/mistakes/annoyance when doing things, take for example this statement: INSERT IGNORE INTO sometable(CatName) VALUES("someitem"); Notice the "IGNORE", that is what does the magic. Normally if the entry "someitem" existed you'd get an error message back such as "Duplicate entry for whatever". What I have normally done in PHP or whatever language is manually coded or made a........

  • FUSE/Curlftpfs mount ftp account as drive partition in Linux


    This is a great way to use your ftp server space, for example on your web hosting account (althoughI believe many hosts don't allow storage like this), but if you have a VPS/Dedicated Server etc.., this would be perfect. Imagine how easy it is to work with an ftp account that you can just mount as a normal partition or directory in Linux, it would be great for backups etc.. Name curlftpfs - mount a ftp host as a local directory Synopsis........

  • Install Mac OS X 10.4.6 Tiger on AMD32 VMWare


    *Note OS X is strange to install, I thought my HDD was not being detected by you just have to go to Diskutil and create a partition for the root filesystem and then close/move the Window and proceed with the install. After install Mac OS X 10.4.6 Tiger I get a black screen that says: b0 error Most people say the partition has to be marked as "active", actually that just means marked as "bootable". Instead of t........

  • LUKS/cryptsetup Tutorial for Linux Hard Drive Partition Encryption


    This is based on Debian Linux but should apply equally to any *nix distro. Install LUKS/crypt-setup apt-get install cryptsetup Setup your LUKS Partition Of course change /dev/md2 with whatever partition you intend to use LUKS on. cryptsetup --verbose --verify-passphrase luksFormat /dev/md2 You'll be asked to verify your decryption password twice *DO NOT FORGET THIS PASSWORD AS IT IS NOT RECOVERABLE!........

  • XBOX 360 No Sound over HDMI Solution/Fix


    My XBOX's dashboard/firmware was from sometime in 2008 when I first bought the system. I mainly played using composite cables but at my brother in law's house we used HDMI. The very first time it worked, but then I bought some games that did some update and after that HDMI never worked. The symptoms besides having on sound is that your XBOX will show PC monitor resolutions but won't have any option to say you have a 720P or 1080P display, this means the XBOX firmware is fa........

  • Use rcconf to edit startup/init.d/init scripts on Debian/Ubuntu based distributions


    I've never understood how to enable and disable services for different run levels in Debian based distros, it's just weird, annoying and doesn't make sense. I much prefer chkconfig from RHEL. Just install the package called 'rcconf' and be done with it. rcconf makes things easy for you. apt-get install rcconf Reading package lists... Done Building dependency tree Reading state information... Done........

  • Fix Slow 2D Graphics Xorg.conf Ubuntu/Debian/Mandriva Linux


    I'm using Ubuntu 8.04 but anyone using older kernels will find this may apply to them. My Intel graphics are very slow with the default Xorg settings but by using "EXA" acceleration, scrolling down windows of text becomes pretty snappy. Just edit /etc/X11/xorg.conf Section "Device" Identifier "Configured Video Device" &nb........

  • cPanel complaint - No Shared SSL! cPanel 11.25.0-R46156 - WHM 11.25.0 - X 3.9


    I've recently used CPanel on the admin side for the first time and have to say I hate it. Everything from the layout to the functionality screams "hackish". It just lacks so many common sense features and way of working. I was never 100% impressed with Plesk but the basics were definitely laid out and done in a sensible manner, even though it is made by a Russian company, they definitely thought about how to make a Control Panel. I have no idea why people........

  • mdadm can you downgrade the superblock?


    Why would you want to downgrade the superblock? Old mdadm verisons like mdadm 2.5.6 only use the 0.90 superblock/metadata and new versions use 1,1.0,1.1 and 1.2 superblocks by default. There are some annoying caveats with this, first of all the new superblocks (later than 0.90) CANNOT be read by GRUB, so you won't even be able to install GRUB. Even worse, old versions of mdadm CANNOT automatically detect arrays even if they were created with a new version of mdadm with th........

  • Centos How To Add Static Network Route


    route add -net 192.16.5.0 netmask 255.255.255.0 eth0 Of course adjust as you need (eg. the 192.16.5.0 should be changed to the subnet you need access to and eth0 should be changed to the network device that you want that subnet routed through). I also use the /etc/sysconfig/rc.local script and add the above into it (remember that this route only gets added AFTER all other init scripts have finished though).........

  • Linux Centos/RHEL can't find php/apache/httpd/mysql/ftp/exim/sendmail ?


    I wasted a lot of time wondering why I could never find those packages. Check the /etc/yum.conf file and at the bottom look for the "exclude=" line. Below is what I found in mine exclude=apache* httpd* mod_* mysql* MySQL* da_* *ftp* exim* sendmail* php* bind-chroot* Just remove those entries or uncomment that line and you'll get access to the missing applications.........

  • Warning: get_browser(): browscap ini directive not set. PHP Error Solution Fix


    Warning: get_browser(): browscap ini directive not set. Solution is to edit /etc/php.ini Uncomment this: [browscap] browscap = extra/browscap.ini........

  • CPanel Solution for Error Missing HOST Config Line in /etc/wwwacct.conf, please reconfigure with Edit Setup.


    Edit /etc/wwwacct.conf Then add/edit the HOST line to add your hostname. eg: HOST yourcpanelserver.com........

  • How To Set DHCP/Static IP Address in Centos/RHEL/Fedora & Debian/Ubuntu/Kubuntu/MEPIS Set DHCP/Static IP Address


    Basically the two main types of distros are Debian and RHEL/Centos based. I'm just going to give a quick overview of how the configuration of IP interfaces works in Debian/Centos based distros. *Just one thing to remember, when setting IPs statically you have to manually specify a DNS server in /etc/resolv.conf (since DHCP is what normally does it automatically) Debian/Ubuntu/Kubuntu/MEPIS The IP (DHCP &........

  • mdadm force/fix proper md127 name


    I have an md0 arary that my Centos install refers to. I feel this is half the reason why it won't boot anymore. I saw the initrd for Centos was assembling it as md127 even though it was known as md0. The reason for this is because I used mdadm --assemble --scan to detect the array on a LiveCD. I had no idea this name would stick (but now I realize the name is permanently stored in the metadata once you mount md127 or whatever random name assemble gives it). W........

  • Openvz Enable Most Common iptables modules


    The default options for iptables are very basic. Here is what you need to do in order to enable them in OpenVZ. 1.) Add the modules to iptables and restart iptables: vi /etc/sysconfig/iptables-config Edit the line as so: IPTABLES_MODULES="ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp" 2.........

  • MySQL Recover/Reset Lost/Forgotten root Password


    One note is to secure MySQL, I don't know for sure but I believe you could login to MySQL remotely with no password during this operation (I'm not sure, maybe it doesn't accept blank passwords but I firewall MySQL port anyway and recommend you do the same). First edit /etc/my.cf Under the [mysqld] field add the following line somewhere: skip-grant-tables Now restart mysql: service mysql restart or on Debian sty........

  • Debian 5.04 RAID 1 mdadm boot problem GRUB error


    I successfully created a single RAID 1 partition which includes /boot inside it and my root directory through the Debian installer. It said GRUB installed successfully but when I try booting the OS it seems GRUB can't read anything. When trying to boot from GRUB GRUB Loading stage 1.5. GRUB loading, please wait... Error 2 I get "Error 2" when trying to boot Debian. I also notice from a LiveCD that........

  • Centos 5.5 RAID 1 boot issue


    I installed 5.5 with a 300GB RAID 1 partition (boot is also on this partition). It booted up fine the first few times until after I used a Live CD and accessed the array, and it became named /dev/md127 for some reason. Now whenI boot into CentOS I get a kernel panic and different errors, once I got "invalid superblock", even though the array is fine (it didn't happen again, probably because I was sure to dismount and stop the mdadm array properly). Here's what........

  • Intel Corei5 750 Complaint/Onboard Video Issue on Intel H57 chipset not working


    Do you have an LGA1156 board and wonder why your onboard video isn't working? It's probably because there is no GPU integrated on the board itself, it is supposed to be on the CPU and new CPU's from Intel don't come with it! I was shocked to learn that you can buy a motherboard with onboard video which doesn't work. Inever knew it was being done or possible, but to make it worse the latest Core i5's don't have video on the die of the CPU. This means having on........

  • Gigabyte GA-H57M-USB3 Complaint Review/Comments


    I'm not impressed with this motherboard, I was impressed with my Gigabyte AM3 board which seems to work flawlessly. Everyone knows that the firmware is flawed, even though I have the F6, it still seems that the system doesn't reset properly or quickly enough. Another HUGE problem is that in most Linux kernels the NIC won't work (if you try 10 times by rebooting it might). I also notice that you need to power down for it to work. This board does not seem very com........

  • Asus O!Play cannot access network/workgroup shares


    It always worked fine before but no amount of power unplugging/cycling does any good. I can access one network share and that is one that I've already saved, but it can't see any workgroups. One silly thing is why is there no option to manually connect to a netbios name or IP? It seems there is a bug with the firmware and that the SMB client is not working properly. Hopefully it fixes itself at some point. Between this and the lack of support for embedded s........

  • Compile PHP 5.3.2 on Centos 5 and CPanel/WHM because of error - Fatal error: Call to > undefined function imagecreatefromjpeg()


    This function and others may not work with the stock PHPinstall on Centos/CPanel: Fatal error: Call to > undefined function imagecreatefromjpeg() Even with libjpeg-devel installed it won't work because PHP was not compiled with jpeg support, so we have to do the dirty work ourselves :) Here is the command/yum's I did to install missing libraries for PHP that configure will complain about (yes it is a one by one process). yum install bzip2-........

  • Unixbench Score on Core i5 750 with OpenVZ Kernel vs Xen/Openvz


    This was unbelievable how much the Xen kernel slows things down, keep in mind both tests were done on the hostnode, one was with the Openvz-Xen hybrid kernel and the other was just OpenVZ. You can see the performance difference is nearly 300% better when not using the Xen kernel. OpenVZ-Xen Kernel Test Results (I was wondering what was wrong/so slow with my Core i5!) # # # # # #&n........

  • WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!


    The easiest way is if you have a secure way to connect and verify the hostkey of the remote host by using this guide. @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOME........

  • crontab Reference/How To/Info/Guide


    I can never actually remember the order and the number of parameters so here they are: minute hour day of month month day of week command 0 5 *........

  • SSH Automatic/Passwordless Logon - Setup Public Key Encryption In Single Command


    This is a very simple solution, but most guides out there make you login twice (once to scp the key) and once to put the key in authorized_keys. There's no need for that. If you don't already have a ~/.ssh/id_rsa.pub just type "ssh-keygen -t rsa" and keep hitting enter until it's done :) Just use this code to easily enable passwordless login with SSHD key=`cat ~/.ssh/id_rsa.pub`;ssh user@192.168.5.25 "echo $key >> ~/.ssh/auth........

  • Asus Eee PC 1000HE Crashed/Need To Recover/Restore Windows? Easy Solution is Hitting F9


    I'm not a fan of Asus and won't be buying another because of having to fight Asus over a bogus warranty denial (it's a long story but they only replied about how to RMA my unit weeks later on the EXACT day the warranty expired). Anyway, it's just a matter of hitting F9 to do this, there's no need to worry about booting from USB or CD (unless of course you want a different OS eg. Windows XP Pro, Vista/7, or a flavor of Linux or Unix). Also remember that you need to fully/properl........

  • Linux 2.6.33.3 Kernel Error CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function b


    CC drivers/message/fusion/mptsas.o drivers/message/fusion/mptsas.c: In function `mptsas_port_delete': drivers/message/fusion/mptsas.c:106: sorry, unimplemented: inlining failed in call to 'mptsas_set_rphy': function body not available drivers/message/fusion/mptsas.c:462: sorry, unimplemented: called from here make[3]: *** [drivers/message/fusion/mptsas.o] Error 1 make[2]: *** [drivers/message/fusion] Error 2 mak........

  • mdadm Linux Software RAID auto-detect and assemble RAID Array


    mdadm --assemble --scan mdadm: /dev/md/diaghost05102010:2 has been started with 2 drives. mdadm: /dev/md/diaghost05102010:1 has been started with 2 drives. mdadm: /dev/md/diaghost05102010:0 has been started with 2 drives. -bash-3.1# cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] [multipath] md125 : active raid1 sda1[0] sdb1[1] 14658185 blocks super 1.2........

  • rsync halted froze Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync)


    Out of memory: kill process 7559 (rsync) score 635 or a child Killed process 7559 (rsync) I was surprised to see this in my dmesg whenmy rsync backup suddenly stalled/stopped. This system has 3 gigs of RAM and lots of free memory so I don't understand what is happening. rsync invoked oom-killer: gfp_mask=0x200d2, order=0, oomkilladj=0 Pid: 7600, comm: rsync Not tainted 2.6.24.2 #83 [] oom_kill_pr........

  • Is your NIC really down and really dying? r8169: eth0: link up r8169: eth0: link down NetworkManager: (eth0): carrier now OFF (device state 1)


    Apr 30 17:07:07 localhost kernel: [12265558.582378] r8169: eth0: link up Apr 30 17:07:07 localhost NetworkManager: (eth0): carrier now ON (device state 1) Apr 30 17:07:08 localhost kernel: [12265559.237961] r8169: eth0: link down Apr 30 17:07:08 localhost NetworkManager: (eth0): carrier now OFF (device state 1) Apr 30 17:07:11 localhost NetworkManager: (eth0): carrier now ON (device state 1) Apr........

  • get_printer_attrs: resource name '/printers/printers' no good! - cups error


    This is what the /var/log/cups/error.log says after my Samsung CLP-310N decided to stop printing. This is a new printer that replaced my CLP-300 and it has been working for a day so far. What happened is that I lifted the top part (not realizing there were rollers on it) and it stopped printing. The network activity light was flashing ,hitting the stop button didn't do anything. Even powering the printer on and off did not help. I have restarted CUPS and SMB on the........

  • rsync my favorite/best/optimal default switches and options


    Not sure what rsync switches/options to use? rsync -PDrphogtl The short version would be: rsync -Pha I think these are really common sense options to use and probaby should be the default. Explanation of rsync switches P = display the progress D = hybrid of --specials and --devices so all special and device files will be copied as well. r = recursive (otherwise rsync won't copy files deeper than........

  • rsync ERROR: sdb2/backup.r18 failed verification -- update retained.


    ERROR: sdb2/backup.r18 failed verification -- update retained. This happened when Iwas rsyncing a dying hard drive, a lot of people seem to report this as an error with rsync itself but I don't think rsync is the issue at all. I know the source hard drive was bad, it was having all kinds of timeout, seek, hardware ECC recovered and reset errors. The only time something else could be the problem is if the data is being corrupted in transit, perhaps through........

  • Seagate Drive 500GB Drive Dying


    This drive is clearly on the way out, the Kernel knows it but I'm surprised that SMART is not concerned. I didn't blame Seagate for their past issues until now. This hard drive has hardly been used and has not even been powered on for a year according to SMART. Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device........

  • MySQL TEXT field size length limit reminder, don't truncate your data!


    I thought there would be an error message or warning from MySQL in the case that the text you submit is greater than the allowed limit based on the field. So essentially I submitted text that was about 120,000 characters long, whereas the limit of TEXT is just 65,535 characters! I almost lost half of my data/what I typed without knowing it! I just altered the field type in my database from TEXT to LONGTEXT. I can't see how LONGTEXT wouldn't be long enough for MOST........

  • Seagate 7200.11 firmware defect in 500GB, 1000GB (1TB) and 1500GB (1.5TB) Hard Drives


    Seagate Inventory/Firmware Check I heard about this issue a long time ago but never looked into it. I figured I wasn't affected since my 500GB drives were running for so long. I've been using Seagate's since 2002 and to this day all of the drives I have are alive from Seagate. *Update the bad news is that I realize one of my 500GB's is about to die, it's not even a year old, but is also not affected by the recall according to Seagate! Seagate Inventory/Firm........

  • Linux AHCI Hotswap Tips - Remember To Reread The Partition Table WITHOUT rebooting


    From the package "parted" you can use the command "partprobe" to re-read the partition table. I really hate rebooting, and that's what Iloved to hear about AHCI motherboards, that they allow hotswap so you don't have to reboot. But that's only as good as the OS, if the OS does not reload the partition table you won't be able to do anything with that new drive you attached without rebooting. Yes, even without re-reading the partiton table Linux will........

  • nginx - the ultimate load balancer


    You can find it for free at http://nginx.org/ I find nginx is simpler to setup than pound (it's not hard but I found it unintuitive and annoying), it seemed to make some basic setups overly complicated with the config file syntax. nginx on the other hand is perfectly suited in everyway, it is even simpler to setup and seems to be the most stable and most efficient any load balancer. I would go as far as to say that a good nginx setup is more relia........

  • Convert HDD/Hard Drive Partition(s) into non-RAID into RAID 1 using existing data without data loss and without reformatting.


    Before we start I take no responsibility for this, you should have a backup and if you make a mistake during this process you could wipe out all of your data. So backup somewhere else before starting this as a precaution, or make sure it's data you could afford to lose. The RAID 1 Setup (Hardware Wise) I've already setup my 2 x 1TB (Seagate) drives with identical partitions, make sure your new hard drive (the empty one) is setup like your curr........

  • Monitor MB/s Disk IO Usage/Bandwidth - Use iostat from the sysstat Package


    The binary "iostat" comes from the package "sysstat" and is available on all Linux/Unix like platforms. Use the "-m" option to give you what you probably want, which is to see in MB/s how much bandwidth each disk is doing. iostat -m Linux 2.6.24.2 ((none)) 04/16/10 avg-cpu: %user %nice %system %iowait %steal %idle ........

  • Linux EXT3 16GB-17GB maximum filesize issue solved/how to fix


    I have no idea why but mkfs.ext3 defaults to a patheticlly small blocksize of 1024 bytes/1KB (kilobyte). That means the maximum filesize is ONLY 16GB! With 2KB/2048 bytes you get a 256 GB maximum filesize, and with 4KB/4096 bytes you get 2TB! I finally noticed/paid attention to this after realizing that with rsync and scp that no file larger than 17GB could be transferred. I then realized it must be a file size limit on the partition. Here is what tune2fs tol........

  • email2fax and Asterisk to do eFaxing


    It's basically free bash shell script available from: http://wpkg.org/email2fax/index.php/Main_Page Make sure you have the required tools: libtiff ghostscript mpack/munpack Where you can e-mail your Asterisk box and it will fax it to the phone number in the subject line. The good news ends there, it is fairly undocumented and buggy. Take for example how the documentation mentions you can invoke from the com........

  • XMPP Chat Protocol using Jabber - Guide Tutorial Setup Linux Chat Server


    In Debian based distros: apt-get install jabber Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: fakeroot dkms Use 'apt-get autoremove' to remove them. The following extra packages will be installed: jabber-common The following NEW packag........

  • Picking an FTPD (vsftpd) Server in Linux Centos/Debian


    I decided on using yum to help me decide even though I normaly use proftpd I decided to see what else I could find. yum search ftp Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: ftp-stud.fht-esslingen.de * base: mirrors.netdna.com * updates: updates.interworx.info * addons: yum.singlehop.com * extras: mirrors.netdna.com rpmforge........

  • OpenVZ backup container to a single file while it's running using "vzdump"


    Proxmox has made this free utility to backup running OpenVZ containers. It's a great program which is actually just a PERL script but gets the job done. This program is not 100% required because all it really does is cp -a from your container's path as far as I know but it is still good to have uniformity to how you backup your containers. For RPM distros such as Centos/RHEL/Fedora etc.. download and install this: wget http://www.proxmox.com/cms_proxm........

  • Codelite C++ IDE is a Cross Platform Unix/Linux (Mac OS, Ubuntu etc..) and Windows for C++ development


    Codelite is a great choice and I intend on getting back into C++ development and I think Codelite is great being cross platform. It looks like it was designed with a lot of thought and should do the job better. I really dislike the bloated and confusing IDE's from big companies like Microsoft where you usually have to use .NET and other useless technologies that just give Microsoft the advantage over you, the programmer, and the users.........

  • Windows XP How To Edit/Find Recent Documents and "File -> New" Templates to create New Word Document, Text/Notepad, Excel etc...


    All you have to do is browse to: C:Documents & SettingsYourUserName and you'll see the following: Inside "My Recent Documents" are of course shortcuts to the most recent documents you opened Inside "SendTo" is your sendto, you could edit that to Send a file to a network destination, your Flash Drive........

  • Compaq V2405CA Laptop - Unixbench Performance Test


    Here are the results, it is Sempron 3000+ AMD Mobile, 500Gig HDD, 512MB RAM with shared ATI Radeon graphics. # # # # # # # ##### ###### # # #### # # # # ## # # # #&nb........

  • heartbeat is stopped for some reason


    heartbeat is stopped for some reason Anyway hnode2 was active and the services are running fine but I see heartbeat has been stopped somehow. Here is the last log I see of heartbeat: [quote:23c84415f5] Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: MSG stats: 9/1762471 ms age 0 [pid16738/MST_CONTROL] Sep 9 17:15:32 hnode2 heartbeat: [16738]: info: cl_malloc stats: 716/51784021 152624/74519 [pid16738/MST_CONTROL] Sep 9 17:15:32........

  • PHP cannot access /usr/bin/openssl


    PHP cannot access /usr/bin/opensslI have verified the username that runs the process is able to access /usr/bin/openssl and it does exist but the PHP script is saying it doesn't exist: [code:1:1fd0f3abbe] if (!file_exists($OPENSSL)) { //echo "ERROR: OPENSSL $OPENSSL not foundn"; }[/code:1:1fd0f3abbe] I don't get itI can clearly see the contents of /usr/bin by using the PHP system fu........

  • rsync bash script


    rsync bash script [code:1:722d8a25c1]#!/bin/bash # config --------------------------------- # two methods # from = receive data from another server # to = send data to another server rsync_method=from rsync_ip='192.168.5.18' local_dir='/home/backupguy/backups' remote_dir='/home/backup' free_space_bin='/home/backups/freediskspace.sh' # config end ------------------------------ if [ '$rsync_me........

  • Javascript Get a specified element using getElementById()


    Javascript Get a specified element using getElementById()Great, it produces the value for whatever "id" is passed to the function. http://www.java2s.com/Code/JavaScript/Development/GetaspecifiedelementusinggetElementById.htm [code:1:1287ede953] function getElement(){ var x=document.getElementById("myHead........

  • JavaScript how to do math arithmetic with floats and int


    JavaScript how to do math arithmetic with floats and intI have 3 variables some of which are just int and some float and need to find their sum It just adds them as strings for some reason.Normally this would work but the floats were actually text technically I guess since they came from a form. You need to convert them using parseFloat() and then everything is fine.........

  • JavasScript how to set or write value in id tag


    JavasScript how to set or write value in id tagbla I need to set a value inside that DIV tag using Javascript, how would I do it?Doesn't work for me: [quote:c6b5f693a5]Warning: Element referenced by ID/NAME in the global scope. Use W3C standard document.getElementById() instead. Source File: http://hosting.com/vps-order.html Line: 19[/quote:c6b5f693a5] [code:1:c6b5f693a5]........

  • Clone any OS partition perfectly


    Clone any OS partition perfectlyIn one box I needed to copy the boot partition to another disk while retaining the MBR and other data. I simply ran this command: [code:1:1b1ff110ca]dd if=/dev/hda1 of=/dev/hdb1[/code:1:1b1ff110ca] [b:1b1ff110ca]if[/b:1b1ff110ca] = source patition [b:1b1ff110ca]of[/b:1b1ff110ca] = destination partition Here's an interesting article on it http://www.rajeevnet.com/hacks_hints/os_cl........

  • GRUB Boot FreeBSD


    GRUB Boot FreeBSD[code:1:a7050277b7]title FreeBSD 6.0 root (hd0,2,a) kernel /boot/loader[/code:1:a7050277b7] Just insert the above code into GRUB's [b:a7050277b7]menu.lst[/b:a7050277b7] and make sure you set the root path correctly. [quote:a7050277b7]Let's quickly explain what the root (hd0,2,a) means: *hd0 stands for the primary master drive *2 stands for partition 3 *a stands for the........

  • Mount Linux ext2 file system


    Mount Linux ext2 file systemNormally in Linux you could mount ext2 or ext3 etc... like this: mount -t ext2 /dev/hda1 /mnt/hda1/ In FreeBSD the difference is of course the disk naming conventions (hda1 would be known a /dev/ad0s1): To mount ext2 in FreeBSD just type: mount -t ext2[b:68c16c60bf]fs[/b:68c16c60bf] /dev/ad0s1 /mnt/ad0s1........

  • Asterisk FreeBSD compile problems


    Asterisk FreeBSD compile problemsI couldn't get it to compile without using the following options at compile time: [b:b7d672ee28] make install WITHOUT_ZAPTEL=YES WITHOUT_MYSQL=YES WITHOUT_FAX=YES WITHOUT_ODBC=YES WITHOUT_H323=YES[/b:b7d672ee28]Some problems you might have with copying over your Linux config files to FreeBSD is different paths. [b:f044931f41]For example the etc path for Asterisk on BSD will now be:[/b:f044931f41] [qu........

  • Problems surfing web/serving


    Problems surfing web/servingI noticed sometimes websites wouldn't load at random through a FreeBSD box and other systems on the same link didn't have the issue. I believe it is because of the low default limit of 128 TCP connections that caused the problem. It would also slow down any traffic that requires many connections such as Bittorrent. The fix is to increase the amount of connections to at least 1024 Edit [b:520b050d3e]/etc/sysctl.conf[/b:520b05........

  • CREATE Database/Granting Privileges


    CREATE Database/Granting PrivilegesCREATE your first database Code: [code:1:0668cd8e74]CREATE database myfirstdb; [/code:1:0668cd8e74] CREATE a user for your first database This one creates the user 'sqladmin' and gives them 'usage' on your new database 'myfirstdb' Code: [code:1:0668cd8e74]mysql> GRANT usage on myfirstdb.* to sqladmin@localhost; Query OK, 0 rows affected (0.00 sec)[/code:1:0668........

  • Centos 4.3 x64 & VMWare Server Beta


    Centos 4.3 x64 & VMWare Server Beta[code:1:6d0b2c8c2f] The correct version of one or more libraries needed to run VMware Server may be missing. This is the output of ldd /usr/bin/vmware: linux-gate.so.1 => (0xffffe000) libm.so.6 => /lib/tls/libm.so.6 (0xf7fbd000) libdl.so.2 => /lib/libdl.so.2 (0xf7fb9000) libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fa7000) libX11.so.6 => not f........

  • Upgrade Release Kernel Tips


    Upgrade Release Kernel TipsThis is for CentOS 3.1 to 3.8 but the methodology will apply everywhere. I ran into a problem first of all with a non-booting system after running #yum update centos-release It took me to 3.8 and upgraded all the other packages [b:7e931c835d]BUT[/b:7e931c835d] because of some stupid flags enabled in /etc/yum.conf the KERNEL WASN'T UPGRADED SO AFTER BOOTING, WELL IT DIDN'T BOOT OF COURSE :) H........

  • Setup Static IP Address ONBOOT


    Setup Static IP Address ONBOOTAssuming you are using eth0 Note this will work for any version of CentOS and basically any version of Redhat Linux or Redhat based distribution. You would need to create a new file [code:1:02f8d34c30] /etc/sysconfig/network-scripts/ifcfg-eth0:0[/code:1:02f8d34c30] DEVICE=eth0:0 the ":0" at the end specifies alias 0 we could actually change this to ":99" or "........

  • Updated to Version 3.8 and can't login


    Updated to Version 3.8 and can't loginSSHD accepts my password but then hangs at "Last login: Wed Sep 13 21:30:02 2006 from" This occurred during a yum update after upgrading my release, installing the new kernel and rebooting. I got kicked out of sshd after seeing the following during yum update: telnet 100 % done 85/476 tux 100 % done 86/476 ntsysv 100 % done 87/476 rpmdb-redhat 94 % done 88/476........

  • Telus + 2Wire 2700 Router Horrible


    Telus + 2Wire 2700 Router HorribleWell first of all let me say this is the only router/switch that sometimes seems to crash/disconnect computers on the local network. This device also thought it would be smart to block VOIP packets coming from my Sipura ATA VOIP adapters so I disabled the [quote:cb89ba7bff]"Invalid TCP Flag Attacks (NULL/XMAS/Other)"[/quote:cb89ba7bff] option Then all of a sudden I couldn't get onto any web pages, the wireless........

  • Need identd for port 113 ? Install authd


    Need identd for port 113 ? Install authdyum install authd Happy identing :)Actually it's not that simple. It installs as an "xinetd" service and is disabled and turned off by deafult. To enable it run: [code:1:8c94df8319] chkconfig --level 3 auth on service xinetd restart [/code:1:8c94df8319] This will set identd aka authd to start by default. service xinetd resta........

  • Roxio/Sonic complaints - No verification of burnt ISO Image


    Roxio/Sonic complaints - No verification of burnt ISO ImageThe only thing Nero does better is that it has the option to verify the data written from an ISO/CD Image! Why can't all burning utilities have this feature?........

  • Updating yum repos for DAG /etc/yum.repos.d


    Updating yum repos for DAG /etc/yum.repos.dIn /etc/yum.repos.d [quote:96456b2ab9]Create any file such as "CentOS-Dag.repo" in /etc/yum.repos.d[/quote:96456b2ab9] Add the following to the above file: [code:1:96456b2ab9] [dag] name=Dag RPM Repository For Red Hat Enterprise Linux baseurl=http://dag.atrpms.net/redhat/el$releasever/en/$basearch/dag/ http://dag.freshrpms.net/redhat/e........

  • Crontab Tutorial - Tips & Shortcuts


    Crontab Tutorial - Tips & Shortcuts*/5 * * * * /command The above is an example of a command that runs every 5 minutes. Normally instead if the "*/5" you'd have to type "5,10,15,20,25,30,35,40,45,50,55" etc... You can use it to run a program every 5 days, 5 months 5 years etc...Crontab run one a day at a certain time[code:1:7a3bd32dfa]0 1 * * * /home/backupguy/databackup.sh[/code:1:7a3bd32dfa]........

  • E-Mail Tip


    E-Mail TipI just thought I'd give you guys a good tip about e-mail. It seems a lot of people like to use a Hotmail or ISP (eg. Telus) account for their e-mail but the problem is what happens if you switch ISPs, then your e-mail address no longer works and old friends might not be able to contact you. The same thing has happened for excite.com e-mail addresses where they just shut down. Whether you are a business owner or personal user can you afford to lose an e-mail........

  • Vonage & Linksys Offer Trade-In Program


    Vonage & Linksys Offer Trade-In ProgramVonage & Linksys Offer Trade-In Program Monday, June 13 @ 09:22:36 PDT Vonage is offering customers a way to get a free 802.11g router when they turn in their old one. advertising For a limited time, customers can trade-in their used router any brand, any model for a Linksys Wireless-G Router with 2 Phone Jacks for broadband telephony (WRTP54G) for free (after rebates), when they si........

  • The New Chips on the Block


    The New Chips on the BlockThe New Chips on the Block By Bruce Gain Story location: http://www.wired.com/news/infostructure/0,1377,67795,00.html 02:00 AM Jun. 13, 2005 PT We have embarked upon a new era in x86 PC computing -- so say chip giants AMD and Intel following their launches of dual-core PC processors. So how will dual-core processing change your PC computing experience? Our FAQ should help you decide whether or when you sho........

  • Intel's Finnish Fetish


    Intel's Finnish FetishIntel's Finnish Fetish By Dave Mock June 13, 2005 Chipmaker Intel (NASDAQ: INTC) has successfully topped the personal computer market for decades. Breaking into related areas such as communications has been much difficult for the world's largest semiconductor maker. But a new partnership with Nokia (NYSE: NOK) could help to change that. Intel's forays into cellular-phone and home-entertaiment-device chips have........

  • Intruder detection device uses behavioural analysis


    Intruder detection device uses behavioural analysisIntruder detection device uses behavioural analysis by Antony Savvas Monday 13 June 2005 Symantec is introducing a new intrusion detection product that uses behavioural analysis to block potential attacks on enterprise networks. The new Critical System Protection 4.5 system uses technology that Symantec acquired through last years purchase of Platform Logic. It is designed to protect deskt........

  • MySQL Server wouldn't start


    MySQL Server wouldn't startStart MySQL Server with the following script that would have installed with the port. /usr/local/etc/rc.d/mysql-server.sh start........

  • MySQL Server 3.23 won't start after switching from 4.1


    MySQL Server 3.23 won't start after switching from 4.1I was using a 4.1 alpha version of mysql-server and some how version 3.23 of the client and 4.1 of the client were also both installed! So I forced uninstalled everything because after trying and trying even though MySQL server was using the short 16byte password authentication I got some other errors. After trying with the ports and having it fail because I had existing database data I force installe........

  • Trouble connecting between Windows XP and Windows 98 Shares


    Trouble connecting between Windows XP and Windows 98 SharesOk a few things to check for: * Disable all firewalls * Make sure NetBEUI is enabled on both computers * Make sure the Windows XP computer has the name of the computer logged in user of Windows 98 added as an XP user * Add the XP user to anything you want to share That fixed my problem........

  • FreeBSD Desktop OSs


    FreeBSD Desktop OSsI would probably choose these over Linux. In many ways these are probably more stable and just as easy to use as any Linux distros but the benefit of stable, updated and secure packages! PC-BSD - http://www.pcbsd.org DesktopBSD - http://www.desktopbsd.net/index.php?id=37 Personally PC-BSD is Beta at this point and is not easy if you are installing it on a non-primary partition. I have not used Deskt........

  • FreeBSD detected my burners as normal CD-ROMs


    FreeBSD detected my burners as normal CD-ROMsDoes anyone know how to fix this?Having the same issue here .....I'll let you know once I solve it :)........

  • Chat MSN/ICQ/Yahoo etc.. Clients


    Chat MSN/ICQ/Yahoo etc.. ClientsText-Based: MSN - pebrot, tmsnc, ccmsn ICQ - centericq........

  • sed is great for pattern matching or retrieving lines


    sed is great for pattern matching or retrieving linesHere is a cool example Say you type df: The output would be something like: [quote:3bb8d51437]Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda2 1712432 1206664 418780 75% / /dev/hda1 31201 10505 19085 36% /boot none 30932 0 30932 0% /dev/shm [/quote:3bb8d51........

  • Package management


    Package managementIf you're like me and often like using an older version you'll need to know this. Since all 5.x versions no longer have packages of their own you'll have to use the 5-stable The best way is to set the [b:d5e8972240]packagesite environment variable[/b:d5e8972240] like so in your [b:d5e8972240].profile [/b:d5e8972240]file [quote:d5e8972240]vi /etc/.profile[/quote:d5e8972240] Add this: [code:1:d5e897224........

  • CVSUp the Easy Way


    CVSUp the Easy WayIf you're reading this you probably have never used CVSUp or don't know how. CVSUp can be used for two things or just one if you prefer. *Keeping your kernel up to date *Keeping your port list up to date Start by editing the following file in: [b:76928b387d]vi /usr/share/examples/cvsup/cvs-upfile[/b:76928b387d] It can be quite overwhelming with all the crazy options. Basically there are only 3........

  • Norton Antivirus is the worst - who would have known?


    Norton Antivirus is the worst - who would have known?http://www.software-antivirus.com/ Check the link above, that review site lists Norton as one of the ones to stay away from. With good reason too, I always wondered why Norton seemed to miss so many viruses, spyware and such. Even when it didn't, it was absolutely useless because it was either unable to delete the file and it was never able to repair or disinfect. So in essence, from my experience, N........

  • CDR Manufacturers - Why is so much media bad?


    CDR Manufacturers - Why is so much media bad?I have searched for good media and tried many kinds for years. I guess I'll try to summarize my findings and conclusions. Dye is irrelevant, dye of any color can be good or bad, it more likely depends on the manufacturer. Speaking of manufacturers, the name at the top of the disc means nothing. For example, Memorex along with any other 'brand' is actually always made by another manufaturer including CMC Mag........

  • African money SCAM


    African money SCAMI have received countless of these sorts of emails where the person claims to be from an African nation which has a deposed finance minister or some other strange situation which puts millions of dollars at their disposal. The only problem is that they need a partner to get the money out. And they have entrusted only you, yes that's right, to donate your bank account information along with SIN number so they can secretly wire the money over and you w........

  • Use Mozilla Firefox, not Internet Explorer - You'll be glad!


    Use Mozilla Firefox, not Internet Explorer - You'll be glad!Hey guys, I just thought I'd recommend that everyone switch to Mozilla Firefox as their web browser. You can find it at http://mozilla.org It is free and it is much better than IE. It has a built-in popup blocker which works great and most importantly, it doesn't have a million critical security flaws which could compromise your security such as passwords for on-line banking etc..........

  • Basic Port Listing


    Basic Port ListingHopefully someone finds this useful or at least interesting. http://www.sans.org/top20/#u9 Name Port Protocol Description Small services ........

  • Intrusion Detection Resources


    Intrusion Detection ResourcesI think this could be very useful even for home users in learning how to secure their networks or even offices. http://www.sans.org/resources/idfaq/........

  • Linux Security Mini-tutorial


    Linux Security Mini-tutorialThis site has a good tutorial to get you started on securing your Linux system. Although I'm sure all of our systems are already 100% secure :lol: http://www.yolinux.com/TUTORIALS/LinuxTutorialInternetSecurity.html........

  • My list of handy security links - Ongoing


    My list of handy security links - Ongoing[b:6f8d25be68][size=18:6f8d25be68]News[/size:6f8d25be68][/b:6f8d25be68] Security Focus http://www.securityfocus.net - Nice Security News Site CERT http://www.cert.org/ Common Criteria (see if your OS/software is EAL4 certified) EAL(Evaluation Assurance Levels is the industry standard for evaluation of security in software) http://www.commoncriteria.com [size=18:6f8d25be68][b:6f8d25be68]Tools[........

  • Other Security Web Sites


    Other Security Web SitesSeveral websites actively track security issues. This list provides you with the major providers of security information on the Web. Many of these organizations also provide newsletters and mailings to announce changes or security threats: Center for Education and Research in Information Assurance and Security (CERIAS) CERIAS is an industry-sponsored center at Purdue University that is focused on technology and relate........

  • Nice Search Engine Optimization Tools


    Nice Search Engine Optimization Toolshttp://searchenginewatch.com/facts/article.php/2156041 I quickly checked this out and I like the Google tool that helps you determine the popularity of certain keywords and then it gives you other related search terms that those people used to search with. Excellent :)........

  • Broadband Preferences


    Broadband PreferencesLet's see what people prefer.........

  • InnoDB is a free installer for Windows based systems


    InnoSetup is something Ijust realized many commercial developers use for installation. Why? Because it's100% FREE, simple, and efficient to use. The maker has really done a great job and the installer basically works on all versions of Windows since 95. I'll keep this in mind the next time I code a Windows application since it's been years for me.........

  • Wireless/xmit power - DD-WRT v23 SP2 (09/15/06) std - build 3932 Linksys WRT54G/GL/GS


    I played around with xmit power (how much power in mW) to see if I could increase the range and signal strength. Idon't think this Linksys WRT54G's strength is the wireless, it seems to have poor signal quality and transfer rates all around. Ithink part of the problem is also that there are several wireless networks around my house that could be interfering and the walls are thick here. Anyaway, moving on now :) The default is 28mW and I increased it to........

  • Linux Kernel Compilation (Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support ) Error - drivers/net/igb/igb_main.c: In function `igb_up': make[3]: *** [drivers/net/igb/igb_main.o] Error 1


    Linux Kernel v2.6.30.3 102220 blocks CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-x86 CALL scripts/checksyscalls.sh CHK include/linux/compile.h CC drivers/net/igb/igb_main.o drivers/net/igb/igb_main.c: In function `igb_up':........

  • Debian/Ubuntu/Kubuntu Bash/Console/Terminal/Putty Home and End Keys Don't Work or Produce a ~


    This is a very weird, annoying and bizarre quirk with many distributions, especially Debian. The home and end keys don't work, but it's a simple fix as long as you found this article :) You just have to edit /etc/inputrc: Find the commented lines as shown below: # "e[1~": beginning-of-line # "e[4~": end-of-line *If you can't find the above, just copy and paste the code below into your inputrc, it will en........

  • auth/auth_util.c:make_server_info_sam(840) User nobody in passdb, but getpwnam() fails! - SAMBA/SMB Error How To Fix


    auth/auth_util.c:make_server_info_sam(840) User nobody in passdb, but getpwnam() fails! I never found the solution to this in the web, as usual so Ithought I'd post the fix. In plain English smbd is telling us that the user "nobody" does not exist in /etc/passwd. You can simply add this to your /etc/passwd file like so: nobody:x:65534:65534:nobody:/nonexistent:/sbin/nologin Now SAMBA/smbd should........

  • Apache/Mod_SSL not serving the right/expected certificate?


    There is actually by default a "Default SSL" vhost that can mess things up for you and can cause surprising and unexpected results. Default Apache SSL Cert in /etc/httpd/conf.d/ssl.conf there is a default SSL Virtual Host which screws things up by offering itself instead of the SSL cert I specify in my own vhosts........

  • Create/Enable SSL Certificates for Apache on Linux/Unix Systems eg. Redhat,Centos,Debian


    Shortcut/Easiest Way To Create A Self-Signed Key: openssl req -new -x509 -nodes -days 1530 -out server.crt -keyout server.key Using the above, you instantly create a self-signed certificate valid for 1530 days and you can simply skip to step #5.) below. If You Need a Real SSLCertificate (eg. Equifax/Openssl) then you need to create a CSR request (you'll need to follow Steps 1.) and 2.) in order to create the CSR. You then upload the CSR Certi........

  • MySQL Error "ERROR 1045 (28000): Access denied for user"


    This happened with a select statement which writes the result to an external file. I didn't remember the privilege "FILE" must be granted on *.* for this to work successfully, it wasn't actually an authentication issue as it implies since I was already in the SQL prompt and doing the query. SELECT some_id FROM sometable INTO OUTFILE '/tmp/result.txt'........

  • MySQL "Got error 28 from storage engine"


    I've gotten this error enough to bother posting about it, because I've come across so many servers where this happens, so what could "Error 28" possibly mean? Is your database corrupt, or is this a sign of a RAID failure/corruption or even worse, bad blocks on a clients system who has no RAID and never took backups? No, check your free blocks, it simply means you have no space. This was the result of a script that was overzealous and backed up the entire database........

  • Openvz "Container already locked" Error Message Solution/Fix


    I didn't find any useful information that actually fixed this. My VPS was in the "Running State" and I could not stop or restart it. I kept getting "Container already locked" no matter what Idid (I tried all the suggestions in the Google results for this error). Most of the suggestions were for Windows but I only use Linux. The other solutioins also said to restart the VZ service or even the entire hostnode and this was not acceptable to me........

  • Adventures in pre-paid SIM Cards and data GPRS/Edge/3G in China with China Mobile in Shenzhen, Guangzhou, Shanghai, Beijing and other cities


    This really is a difficult and confusing process for non-Mandarin speakers, but here's what I've done and learned so far: You can purchase an "M-Zone" China Mobile pre-paid SIMCard from almost anywhere but I tried to purchase mine from Suning (a large electronics dealer) hoping they would be able to help me or answer my questions but my plan didn't work out at all. At Suning once I found someone who spoke some English they gave me the 55 RMB M-Zone China Mobile P........

  • iPhone Enable Tethering Manually Update ipcc Carrier Settings/Update via SSH


    Everyone says there is a "manual" way of doing it and then they tell you to use iTunes, but if you're like me, you're travelling on business in a foreign country and your laptop does not have iTunes and you don't have a way of getting it and/or don't want it. For this example I'm using the provider "du" in Dubai, UAE (United Arab Emirates) but this method works for virtually all providers. The requirements in this case to truly "manually update........

  • How To Enable 3rd/third party packages in RHEL/Redhat/Centos 4/5 Linux via RPMForge


    It's a bit of a pain that many basic third party tools that aren't put of the main Centos/RHEL repositories are not available unless you compile them or install the RPMForge Repo. *Updated 08/29 with new download location changed from apt.sw.be to rpmforge.sw.be Here's a quick, simple/cut&paste way to do it: wget http://rpmforge.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.i386.rpm rpm -i rpmforge........

  • How to avoid web content hijacking/copying/Force content to be accessed by only 1 domain name


    This is something that happens a lot and it is very dirty, as you probably know each site is hosted on a certain IP address. Sometimes a domain is hosted by a single IP address and the IP address defaults to this very same domain. This means that if someone buys domain abcd.com and enters your IP address (the one of your website) as the A record, your content will show up on their domain as if it was their own. There is an easy way to prevent this by using .htacces........

  • SAMBA/SMB Share "Write" Access without Delete


    There is a nice mode that Samba supports which you can add to smb.conf create mode=555 This way users can create and write files/directories without deleting (except I believe dirs can be deleted but only if there are no files inside). It's too bad that Linux does not have built-in "write"/"delete" privileges and is something that even Windows 98 can trump.........

  • Hard Drive Not Working/Not Detected By Your BIOS Anymore?


    I was starting to panic because suddenly my 1TB Seagate SATA drive wasn't working,I thought it was a BIOS issue because it seemed to have happened after I tried overclocking my Desktop too much. I tried powering down and waiting, but I still couldn't hear the drive spin up at all. I tried a second 1TB hard drive and it wouldn't work either. I checked all power connections again and again until one of the pins in the MOLEX connector popped completely loose. Th........

  • GRUB "Error 2: Bad file or directory type" 0.97 won


    You can see the problem below, GRUB recognizes my hard drive and sees the partitions but cannot access them. This is from the GRUB boot disc I'm using. What happened is that I had some power issues causing this system's power to be interrupted several times and basically an on/off on/off situation. The system won't boot, I just get a flashing cursor and no message or error from GRUB. Obviously the problem is that my MBR seems corrupt or some other issue. My........

  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon - Updated with GlusterFS 2.0.8 & Optimized Client Config


    The results are still not flattering and are nothing close to native performance. Unless GlusterFS has a "DRBD-like" option to delay writes over the network and to only read from the client side, I don't see how performance can ever improve much more. After doing some client optimizations Iadded more to the score: Start Benchmark Run: Sun Nov 29 00:37:44 PST 2009 00:37:44 up 3 min, 1 user, load average: 0.01........

  • Clustered/Distributed Network Filesystems, Which Ones live up to the hype?


    I've tried to find a good sensible solution to cluster with and each technology has it's pros and cons and there is no perfect solution and I've found a lot of "exaggerations" in the applications, benefits and performance of these different filesystems. DRBD I first started off with DRBD and Ihave to say it does live up to the hype, is quite reliable (although it can be annoying to match up the kernel module and user applications since they must match and whe........

  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon - Updated with GlusterFS 2.0.8


    You might remember my original GluserFS/OpenVZ benchmark which produced a horrible 29.8 This is the exact same system, but using the latest 2.0.8 (with some small files patch which speeds up performance) you can see it is about 25% faster. I also haven't tuned my config files at all, but there are some settings that should increase performance on small files which I believe i........

  • yum error not working rpmdb: mmap: No such device TypeError: rpmdb open failed


    Loaded plugins: fastestmirror rpmdb: mmap: No such device error: db4 error(19) from dbenv->open: No such device error: cannot open Packages index using db3 - No such device (19) error: cannot open Packages database in /var/lib/rpm Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py&qu........

  • Tyan S2735-8M Maximum Hard Drive Limit/Not Working/Doesn't work with 1TB 1000GB hard drives


    Inever saved any of the logs, but basically no matter what OS (Linux)I used, I could not get my 1000GB hard drive to work (Seagate SATA). The BIOS recognizes the drive and fdisk -l shows the hard drive as it should. The tricky thing is that different OS's will give you different results, but don't be fooled. You can't use these larger drives for long. Iwas getting all kinds of seek/IOerrors and also messages that the port could not be read.........

  • Unixbench Score with Glusterfs/Openvz & Quad Core Xeon


    This is very disappointing since GlusterFS markets itself as a solution to deploy VPS servers on. On the HNitself I get a Unixbench of about 360. I'm also using an SSH tunnel to secure the communications, but even before that, things seemed very slow. # # # # # # # #####&n........

  • Linux/Unix Open SSH Login Without Password Key Exchange including Debian, Redhat, Fedora, Ubuntu, BSD etc..


    In those 4 simple commands you can setup mutual key exchange between two sshservers by using a single login shell session and single window. *Just change the IP address examples of (10.10.0.2) to the target of your mutual key exchange. It doesn't matter if the server is on a LANor WAN(well unless the server is behind a firewall and you cannot SSHinto it).........

  • Linux Bash Shell Cannot/Can't View File That Starts With - Dash ?


    Iwas getting really annoyed with this, I used full quotes around the filename and vi, cat, less all thought I was trying to pass the dash in the filename as an argument. I didn't realize that all you have to do is just put a dash dash "--"in front. Here's an example:cat -- "-etc-glusterfs-glusterfsd.vol.log" Without the -- you get: cat: invalid option -- c Try `cat --help' for more information. Ih........

  • [error] server reached MaxClients setting, consider raising the MaxClients setting - Apache


    Have you ever seen this dreaded message in your Apache/HTTPD /var/log/httpd/error_log? [error] server reached MaxClients setting, consider raising the MaxClients setting The error itself is slightly misleading. Ibelieve this happened to one of my servers, I found Apache was running still, and that you could telnet to port 80 but no respnose would be given. For some reason my error log initially did not have the above error, but after a restart I saw........

  • Timezone Change/Updated for Linux/Unix Debian/Fedora/Ubuntu/Centos Change Update Time zone


    In Newer Linux Distros This Way Is Easiest and works on newer versions like Ubuntu, Mint, Fedora, Centos, Debian etc. #if you are missing timedatectl this in newer distros like Ubuntu/Mint/Debian and are using a container like Docker then do "apt install systemd" timedatectl set-timezone America/Vancouver Replace the America/Vancouver with the correct timezone. To see the list you can just type "timedatectl set........

  • sudo: Error dropping capabilities, aborting in Linux Centos 5.3


    For some reason Ikeep getting this error when trying to run a sudo command eg: sudo -u someuser somecommand sudo: Error dropping capabilities, aborting My version of sudo is:sudo-1.6.9p17-3.el5_3.1 and I've heard that version 1.7 fixes everything. The only thing is yum does not think sudo has any update. Iguess the new version has not been committed to the RPM repository yet. This is really a huge and ann........

  • Have an OpenVZ VPS/Linux Virtual Private Server and nothing works right?


    A VPS Server I had just wasn't working right, code that I migrated there just wasn't working. For example, it kept telling me the connection to the database was unsuccessful, halfway through iterating through results it already had. Then I realized it wasn't my code. Ichecked my /proc/user_beancounters and found this: cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt........

  • Linux How to Search for text within any file using Linux/Unix - Use GREP


    It's actually very simple and "grep" makes it as easy as possible. I'll outline a few common scenarios and provide some examples. Say you want to search ALLfiles within the current directory (and inside/deeper) for the text "phpinfo()" grep -R "phpinfo()" * If you want to search only certain files such as only .txt you would do this instead: grep -R "phpinfo()" *.txt As you ca........

  • MySQL Restoring And Dumping/Backing UP MySQL Data/Tables/Databases


    Backing MySQL Databases Backing Up/Dumping All Mysql Databases To A Single File mysqldump --all-databases -u admin -p > allmysqldatabases.sql The "-all-databases" clause is pretty obvious isn't it? It means that it will backup all databases. The "-u admin" means login using the user "admin", if you h........

  • Apache Ignoring/Not processing .htaccess file


    I was getting very frustrated one day wondering why it appeared my .htaccess file was being ignored and not processed by Apache. No matter what I did it was obvious that Apache didn't care about my .htaccess file. Then I realized that the default settings must be in effect, which is that my vhost didn't explicitly allow me to override the default settings. This usually comes down to your vhost settings. Make sure you have an entry like this in your Apache vhost settings in........

  • How To Save iptables firewall rules Centos/Redhat/Fedora Linux


    This is something that annoys a lot of people, fortunately the Redhat style OS's are the most simple in this respect. I disagree that Debian's way makes sense, it is more of a hackish approach in how they implement iptables. Anyway, for those who are using Redhat/Centos style OS's it is very simple. Set your rules from the shell/command prompt and to save the iptables firewall rules so they are remember/loaded on boot just run this command: service iptables........

  • iPhone Create Silent/Free Custom Ringtone jailbroken/jailbreak iPhone


    As shown below you can find ringtones in the "/private/var/stash/Ringones*" directory of your iPhone. Different reports have said that the .m4r format is really an MP4 file and some have said AAC and some also say "it's the same as the M4A" format. Whatever the case is, one easy way is to install the silent theme from Cydia and copy that into your ringtones directory. /private/var/stash/Ringtones.sh7cLj root# ls Alarm.m4r ........

  • Bash Script/Linux/Unix HTML/XML Parser


    There is a tool called "xml2" which will parse both HTML and XML scripts, this is very useful to do a mass extraction or conversion of data based on say an HTML table etc.. It becomes even more powerful using bash if certain tags are identified with a certain class="" attribute or something else unique to only the tags you want. Happy parsing.........

  • Unlocked iPhone 3GS and firwmare 3.0 battery short low life horrible


    This is pretty bad, ever since my phone has been unlocked the battery life is horrible. Many others have reported this issue on provider unlocked phones and even jail broken phones. We're talking issues as bad as losing 1% every 3 minutes which is what I seem to have observed as well. For now I'm going to relock the phone, and hopefully a firmware update will address this issue. This is very annoying and it seems apparent this is also happening on 3G phones and that........

  • iPhone Complaint Lock/Standby Disrupts WiFi and uses 3G instead


    Has Apple tried to give a golden egg to the cell phone companies? Has anyone noticed that if you set your lock time to x minutes, the phone doesn't just lock, it goes into standby. When it does this, any WiFi connection you have gets dropped and all push/data functions such as e-mail checking are done through the 3G network. There is no way to change this feature and functionality and it's very annoying, especially if you are downloading something or loading files over the........

  • How to solve the iPhone 15 minute POP/IMAP checking delay option with virtual push


    You need to jailbreak your phone and inside Cydia you'll find "PushMod" which will allow you to set your mail check time to 1 minute instead of 15-minutes. This is a great mod and has saved me a lot of stress and frustration, the lack of Blackberry style "free push service" makes iPhone less attractive, but this solves that. Apple needs to make mobileme free and have a Blackberry style chat network to compete, I'm not willing to pay for something Blackberry........

  • Why Apple should thank the jailbreakers and not patch/stop the jailbreaking exploits


    First of all, the iPhone is crippled in many ways, but most of my complaints about functionality have been addressed through the jailbreak, Ican run apps in the background of my choosing, I can install a terminal, acccess my phone through SSH and SCP and so much more. It even addresses the 15 minute e-mail problem, I installed a program called "PushMod" and now set the checking time to just 1 minute. Apple should really thank the developers for this gift, it ma........

  • iPhone Backgrounder Adds True and Real iPhone multitasking on jailbroken phones


    Apple crippled the iPhone by not allowing multi-tasking of the non-primary apps. I use SSH a lot and I don't want to close my session just to check my e-mail, etc, now an app found in Cydia called "Backgrounder" allows just that. Although it's not perfect, we installed the correct one for "3.x" iPhones and hit "Reload SpringBoard" and the hour/circle glass has just been going for minutes. It seems like it installed fine even with the crash t........

  • iPhone 3GS Jailbreak Information & Benefits


    Truly, the only way to unleash the capabilities and customization abilities of iPhone are to jailbreak, it's not just for hackers anymore. A few days ago someone by the named of "geohot" released a single click application called "purplera1n", which does the entire operation smoothly and seamlessly. In our case, the first time it went as far as "done, wait for reboot" on our Windows machine and for minutes we waited and saw the pic on the iPhone w........

  • iPhone 3GS 32GB "Harsh Review"


    Yes, Iadmit I finally got bitten by the hype as much as I can usually see through it all. Keep in mind this review is of the "stock" phone, no jailbreaking yet which is what really unleashes the customizability and whyI bought iPhone. I had better things to say about this phone before buying it, and it is a great phone, perhaps the best on the market by far, if not because of the Mac OS port onto the iPhone and all the apps, etc, etc. With that said........

  • iPhone Safari Browser and TinyMCE Support


    This is unfortunate and frustrating as many sites use it, a lot of people are frustrated that TinyMCE does not work on the iPhone Safari browser. Apparently the developer of TinyMCE's answer is "talk to Apple about it" It's really frustrating although, I wonder if any other mobile phones are able to use TinyMCE or not, whatever the case is it would be nice to find a solution to use TinyMCE on the........

  • Apple iPhone 3GS and predecessors are leading a revolution


    As much of a computer nerd as Iam, I'm usually a late adopter to technology for a few reasons. Ifeel most new hyped technologies and electronics are mainly fads, and I'm also cheap. Adopting later means you avoid the bugs, kinks and most importantly pay the lowest price, that's me being cheap again :) I never read much about the iPhone but Isaw all the hype around it and until recently I wasn't a big fan of anything Apple until a few years ago I realize........

  • Nokia N97 review, feedback and complaints


    I've had an old Blackberry for a few years and I was ready to spend some serious cash on a nice Nokia. I love the idea of the Linux based Symbian S60 OS, so I was looking at phones like the E63, E71 (both are basically the same, at least CPU/screensize although E71 is thinner, has a 3MP camera, has GPS, and has dedicated buttons to adjust the volume). Then Iheard about the N97 and what a revolution it was supposed to be and it was even compared to iPhone. To........

  • RTL8111/8168B R8169 Gigabit Link slow speeds


    This is the Intel Atom 330 motherboard with integrated Realtek Gigabit NIC (Intel Desktop Board D945GCLF2 Motherboard W/ Atom 330 1.6 GHz Dual Core Processor - Mini-ITX) I cannot achieve more than 15 MB/s, even doing a local transfer through eth0 to it's own IP. 100% 95MB 15.9MB/s 00:06 So this is not a cabling, switch or hardware issue, it seems like a driver or chipset limitation problem. Here is my........

  • SSH Slow Login even with SSHD UseDNS no parameter


    Icouldn't understand why on one system it took a few minutes to get the SSHlogin prompt when connecting to other systems. The other systems all had the UseDNS parameter set to no, which almost always resolves the login prompt delay. The reason is Ubuntu and perhaps Debian and other distributions /etc/nsswitch.conf file Edit yours to have the "hosts" line like so (notice that files and dns are the primary resolution choice........

  • resume: could not stat the resume device file


    resume: could not stat the resume device file I got that after migrating to a different physical hard drive, it wanted to resume from a swap partition that no longer exists. This is actually controlled by "uswsusp.conf" in /etc Just edit it and remove the device or change it to the correct new swap file.........

  • SSH Server Slow/Lagged/Delayed Login Response


    This is really something the SSHServer developers should consider. The cause of this annoyance is because of failed DNS lookups on your IPaddress, which is especially common for many dedicated/col-located servers and also computers on internal NAT/private networks. The chances are this is the cause of your SSHSlow/Delayed Login problems. The easy solution to SSH Login Problems Edit /etc/ssh/sshd_config Add this line to disable r........

  • SIOCSIFADDR No such device eth0 error while getting interface flags - eth0 Ethernet Device can


    Igot this after copying a VMWare image onto another machine in Debian. SIOCSIFADDR No such device eth0 error while getting interface flags The solution 1.) Find and edit the device line in persisent-net.rules note it will be prefixed with something like z25 or something else. vi /etc/udev/rules.d/z25_persistent-net.rules The easiest way is to comment anything out. If you are feeling........

  • OCFS2 crash


    When trying to even cd or ls the mounted OCFS2 partition it crashes. Ithink this is a combination of VMWare Server's problem and the way I mounted and symlinked to it. More than anything this shows the problem and lack of forsight with VMWare, but also that OCFS2 is easily crashed if you do strange things. Output of /var/log/messages for OCFS2 Apr 10 15:57:45 localhost kernel: [84331.691258] Modules linked in: vmnet vmci vmmon ocfs2_stac........

  • Samba SMB Error - Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD


    Server not using user level security and no password supplied. tree connect failed: NT_STATUS_WRONG_PASSWORD That happens when trying to use smbclient to connect to a share. The weird thing is that I can authnenticate just fine from Windows XP. It is partially my mistake, I forgot this share does have a password. I've tried authenticating with the correct user and also with "Guest" because this works in Windows. In Linux I ........

  • Configuring OCFS2 Clustered File System on Debian Based Linux including Ubuntu and Kubuntu


    There's a lot of information and guides on OCFS2 for RHELand Centos Linux but the package setup and configuration is slightly different and this has thrown some people off. Installing OC2FS You should install the following packages to get started: apt-get install ocfs2-tools ocfs2console Configure OC2FS In RHEL/Centos the main configuration file is located in /etc/sysconfig/o2cb However in Debian based Linux it is located........

  • Viewing and Connecting to an SMB Samba Share on Windows/Linux/Unix


    This will give you the basic info needed to browse and connect to Samba shares from the command line. From the GUI of Gnome or KDE etc, it is pretty standard and straight forward. However, I've found very little guides on how to do it from the command line and if you're like me, a nerd who prefers command line for its simplicity and for remote use, this is the way to go. First get a list of all the Samba/SMB shares on the target. smbclient -L hostname........

  • Rackable Systems and their Microslice Clustered 1U Servers


    Ithink there has been a lot of negative press towards Rackable Systems. We will give their new solution credit that it is marketed very well, and comes prepackaged and ready to go. But let's cut through the hype of both sides, the people who love this concept and the people who hate it. What Rackable Systems have done is a first, to minimize space, power and costs into small servers. This is great, and many companies have already built their own servers based........

  • BASH Decrement Does not work


    track-=1 produces track: command not found It's weird because track+=1 works just fine The solution is to used the old fashion method: track=$(($track - 1))........

  • SSH Problem User username from 127.0.0.1 not allowed because not listed in AllowUsers


    User username from 127.0.0.1 not allowed because not listed in AllowUsers What's going on? The user was created properly, it has been defined as having a shell entry and the entry for /etc/passwd and /etc/shadow is set just fine. This is a new and very smart/secure feature of SSHD. It is simple and yet effective, but also very annoying if you didn't know about it being implemented and that hand editing of /etc/ssh/sshd_config is required to allow a newly add........

  • BIND/NAMED woes


    Feb 5 01:39:33 server named[19768]: zone myzone.com/IN: serial number (12331465) received from master 127.0.0.2#53 < ours (200901281) The above is taken from /var/log/messages This can be annoying, it can happen for a variety of reasons. What seems to be happening here is that the slave realizes the time on the slave is ahead of the master, so it therefore assumes it has the most up to date copy and won't actually transfer the zone. The solutio........

  • Writing/Burning a data CD-R/DVD-R or DVD+RW in Unix/Linux


    There's a lot of outdated information and confusion for system administrator's out there. One annoying task for many an Administrator has been backing up data in Linux. You don't need any GUI tools such as K3B or GnomeBaker. Both are excellent tools but for veteran command line users working remotely, using the keyboard is a great and possibly automated way to save yourself pain and hassle. At a later date we'll cover how scripting can automatically backup certain........

  • Google sued by "SearchKing"


    http://searchenginewatch.com/2165111 This was an interesting article and people should be wary of Google's power. Google's policies and actions against competitors borders on anti-trust, far worse than Microsoft. They are doing the right thing for all of us, Google says selling advertising and links is bad for search engines, yet they don't penalize sites who use AdSense. ........

  • Comments About Networking Technology


    We've noticed in many ways that traditional networking even in WANs and LANs has changed very little. Years ago most networks were running on 100mbit and today most still are. Even the average internet connection is largely unchanged from several years ago with some minor exceptions from Europe and Asia.........

  • Welcome to realtechtalk.com


    We have years of knowledge with technology, especially in the IT (Information Technology)industry. realtechtalk.com will always have fresh and useful information on a variety of subjects from Graphic Design, Server Administration, Web Hosting Industry and much more.........

    • Latest Articles

  • How high can a Xeon CPU get?
  • bash fix PATH environment variable "command not found" solution
  • Ubuntu Linux Mint Debian Redhat Youtube Cannot Play HD or 4K videos, dropped frames or high CPU usage with Nvidia or AMD Driver
  • hostapd example configuration for high speed AC on 5GHz using WPA2
  • hostapd how to enable and use WPS to connect wireless devices like printers
  • Dell Server Workstation iDRAC Dead after Firmware Update Solution R720, R320, R730
  • Cloned VM/Server/Computer in Linux won't boot and goes to initramfs busybox Solution
  • How To Add Windows 7 8 10 11 to GRUB Boot List Dual Booting
  • How to configure OpenDKIM on Linux with Postfix and setup bind zonefile
  • Debian Ubuntu 10/11/12 Linux how to get tftpd-hpa server setup tutorial
  • efibootmgr: option requires an argument -- 'd' efibootmgr version 15 grub-install.real: error: efibootmgr failed to register the boot entry: Operation not permitted.
  • Apache Error Won't start SSL Cert Issue Solution Unable to configure verify locations for client authentication SSL Library Error: 151441510 error:0906D066:PEM routines:PEM_read_bio:bad end line SSL Library Error: 185090057 error:0B084009:x509 certif
  • Linux Debian Mint Ubuntu Bridge br0 gets random IP
  • redis requirements
  • How to kill a docker swarm
  • docker swarm silly issues
  • isc-dhcp-server dhcpd how to get longer lease
  • nvidia cannot resume from sleep Comm: nvidia-sleep.sh Tainted: Linux Ubuntu Mint Debian
  • zfs and LUKS how to recover in Linux
  • [error] (28)No space left on device: Cannot create SSLMutex Apache Solution Linux CentOS Ubuntu Debian Mint
    • Copyright © realtechtalk.com 2024